diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/superio/ite/it8772f/early_init.c | 54 | ||||
-rw-r--r-- | src/superio/ite/it8772f/it8772f.h | 2 |
2 files changed, 17 insertions, 39 deletions
diff --git a/src/superio/ite/it8772f/early_init.c b/src/superio/ite/it8772f/early_init.c index 95be01c111..d605fb1a9e 100644 --- a/src/superio/ite/it8772f/early_init.c +++ b/src/superio/ite/it8772f/early_init.c @@ -21,26 +21,6 @@ /* NOTICE: This file is deprecated, use ite/common instead */ -/* RAMstage equiv */ -/* u8 pnp_read_config(pnp_devfn_t dev, u8 reg) */ -u8 it8772f_sio_read(pnp_devfn_t dev, u8 reg) -{ - u16 port = dev >> 8; - - outb(reg, port); - return inb(port + 1); -} - -/* RAMstage equiv */ -/* void pnp_write_config(pnp_devfn_t dev, u8 reg, u8 value) */ -void it8772f_sio_write(pnp_devfn_t dev, u8 reg, u8 value) -{ - u16 port = dev >> 8; - - outb(reg, port); - outb(value, port + 1); -} - void it8772f_enter_conf(pnp_devfn_t dev) { u16 port = dev >> 8; @@ -53,15 +33,15 @@ void it8772f_enter_conf(pnp_devfn_t dev) void it8772f_exit_conf(pnp_devfn_t dev) { - it8772f_sio_write(dev, IT8772F_CONFIG_REG_CC, 0x02); + pnp_write_config(dev, IT8772F_CONFIG_REG_CC, 0x02); } /* Set AC resume to be up to the Southbridge */ void it8772f_ac_resume_southbridge(pnp_devfn_t dev) { it8772f_enter_conf(dev); - it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_EC); - it8772f_sio_write(dev, 0xf4, 0x60); + pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_EC); + pnp_write_config(dev, 0xf4, 0x60); it8772f_exit_conf(dev); } @@ -71,14 +51,14 @@ void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, { set--; /* Set 1 is offset 0 */ it8772f_enter_conf(dev); - it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); + pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); if (set < 5) { - it8772f_sio_write(dev, GPIO_REG_SELECT(set), select); - it8772f_sio_write(dev, GPIO_REG_ENABLE(set), enable); - it8772f_sio_write(dev, GPIO_REG_POLARITY(set), polarity); + pnp_write_config(dev, GPIO_REG_SELECT(set), select); + pnp_write_config(dev, GPIO_REG_ENABLE(set), enable); + pnp_write_config(dev, GPIO_REG_POLARITY(set), polarity); } - it8772f_sio_write(dev, GPIO_REG_OUTPUT(set), output); - it8772f_sio_write(dev, GPIO_REG_PULLUP(set), pullup); + pnp_write_config(dev, GPIO_REG_OUTPUT(set), output); + pnp_write_config(dev, GPIO_REG_PULLUP(set), pullup); it8772f_exit_conf(dev); } @@ -88,15 +68,15 @@ void it8772f_gpio_led(pnp_devfn_t dev,int set, u8 select, u8 polarity, u8 pullup { set--; /* Set 1 is offset 0 */ it8772f_enter_conf(dev); - it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); + pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); if (set < 5) { - it8772f_sio_write(dev, IT8772F_GPIO_LED_BLINK1_PINMAP, led_pin_map); - it8772f_sio_write(dev, IT8772F_GPIO_LED_BLINK1_CONTROL, led_freq); - it8772f_sio_write(dev, GPIO_REG_SELECT(set), select); - it8772f_sio_write(dev, GPIO_REG_ENABLE(set), enable); - it8772f_sio_write(dev, GPIO_REG_POLARITY(set), polarity); + pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_PINMAP, led_pin_map); + pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_CONTROL, led_freq); + pnp_write_config(dev, GPIO_REG_SELECT(set), select); + pnp_write_config(dev, GPIO_REG_ENABLE(set), enable); + pnp_write_config(dev, GPIO_REG_POLARITY(set), polarity); } - it8772f_sio_write(dev, GPIO_REG_OUTPUT(set), output); - it8772f_sio_write(dev, GPIO_REG_PULLUP(set), pullup); + pnp_write_config(dev, GPIO_REG_OUTPUT(set), output); + pnp_write_config(dev, GPIO_REG_PULLUP(set), pullup); it8772f_exit_conf(dev); } diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 14d76acc77..8e8836def0 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -129,8 +129,6 @@ enum thermal_mode { #include <device/pnp_type.h> #include <stdint.h> -u8 it8772f_sio_read(pnp_devfn_t dev, u8 reg); -void it8772f_sio_write(pnp_devfn_t dev, u8 reg, u8 value); void it8772f_ac_resume_southbridge(pnp_devfn_t dev); void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable); |