summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/arch/i386/lib/cpu.c6
-rw-r--r--src/cpu/via/model_centaur/model_centaur_init.c8
-rw-r--r--src/devices/cardbus_device.c9
-rw-r--r--src/include/device/cardbus.h1
-rw-r--r--src/mainboard/via/epia-m/Config.lb20
-rw-r--r--src/mainboard/via/epia-m/Options.lb11
-rw-r--r--src/mainboard/via/epia-m/auto.c12
-rw-r--r--src/mainboard/via/epia-m/dsdt.asl256
-rw-r--r--src/mainboard/via/epia-m/dsdt.c142
-rw-r--r--src/mainboard/via/epia-m/fadt.c4
-rw-r--r--src/mainboard/via/epia-m/failover.c2
-rw-r--r--src/mainboard/via/epia-m/mainboard.c2
-rw-r--r--src/mainboard/via/epia-m/vgabios.c861
-rw-r--r--src/mainboard/via/epia-m/vgachip.h10
-rw-r--r--src/northbridge/via/vt8623/northbridge.c91
-rw-r--r--src/northbridge/via/vt8623/raminit.c790
-rw-r--r--src/southbridge/ricoh/rl5c476/chip.h5
-rw-r--r--src/southbridge/ricoh/rl5c476/rl5c476.c265
-rw-r--r--src/southbridge/ricoh/rl5c476/rl5c476.h4
-rw-r--r--src/southbridge/via/vt8235/vt8235.c57
-rw-r--r--src/southbridge/via/vt8235/vt8235.h4
-rw-r--r--src/southbridge/via/vt8235/vt8235_ide.c4
-rw-r--r--src/southbridge/via/vt8235/vt8235_lpc.c107
-rw-r--r--src/southbridge/via/vt8235/vt8235_usb.c7
-rw-r--r--src/superio/via/vt1211/vt1211.c90
25 files changed, 2251 insertions, 517 deletions
diff --git a/src/arch/i386/lib/cpu.c b/src/arch/i386/lib/cpu.c
index 628bb79e91..11ccee211f 100644
--- a/src/arch/i386/lib/cpu.c
+++ b/src/arch/i386/lib/cpu.c
@@ -234,11 +234,13 @@ void cpu_initialize(void)
// Check that we haven't been passed bad information as the result of a race
// (i.e. BSP timed out while waiting for us to load secondary_stack)
+#if CONFIG_SMP || CONFIG_IOPIC
if (cpu->path.u.apic.apic_id != lapicid()) {
printk_err("CPU #%d Initialization FAILED: APIC ID mismatch (%u != %u)\n",
info->index, cpu->path.u.apic.apic_id, lapicid());
// return without setting initialized flag
} else {
+#endif
/* Find what type of cpu we are dealing with */
identify_cpu(cpu);
printk_debug("CPU: vendor %s device %x\n",
@@ -255,8 +257,10 @@ void cpu_initialize(void)
}
printk_info("CPU #%d Initialized\n", info->index);
- }
+#if CONFIG_SMP || CONFIG_IOPIC
+ }
+#endif
return;
}
diff --git a/src/cpu/via/model_centaur/model_centaur_init.c b/src/cpu/via/model_centaur/model_centaur_init.c
index b76b065ebb..33f10a831e 100644
--- a/src/cpu/via/model_centaur/model_centaur_init.c
+++ b/src/cpu/via/model_centaur/model_centaur_init.c
@@ -15,6 +15,7 @@ static void model_centaur_init(device_t dev)
{
/* Turn on caching if we haven't already */
x86_enable_cache();
+ x86_setup_mtrrs(36);
x86_mtrr_check();
/* Enable the local cpu apics */
@@ -28,6 +29,13 @@ static struct device_operations cpu_dev_ops = {
#warning "FIXME - need correct cpu id here for VIA C3"
static struct cpu_device_id cpu_table[] = {
{ X86_VENDOR_CENTAUR, 0x0670 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0671 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0672 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0673 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0674 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0675 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0676 }, // VIA C3 Samual 2
+ { X86_VENDOR_CENTAUR, 0x0677 }, // VIA C3 Samual 2
{ X86_VENDOR_CENTAUR, 0x0678 }, // VIA C3 Ezra
{ X86_VENDOR_CENTAUR, 0x0680 }, // VIA C3 Ezra-T
{ X86_VENDOR_CENTAUR, 0x0698 }, // VIA C3 Nehemiah
diff --git a/src/devices/cardbus_device.c b/src/devices/cardbus_device.c
index 4c92d91735..5b03d2827c 100644
--- a/src/devices/cardbus_device.c
+++ b/src/devices/cardbus_device.c
@@ -74,7 +74,14 @@ void cardbus_read_resources(device_t dev)
resource_t moving_base, moving_limit, moving;
unsigned long type;
uint16_t ctl;
-
+ unsigned long index;
+
+ /* See if needs a card control registers base address */
+
+ pci_get_resource(dev, PCI_BASE_ADDRESS_0);
+
+ compact_resources(dev);
+
/* See which bridge I/O resources are implemented */
moving_base = pci_moving_config32(dev, PCI_CB_IO_BASE_0);
moving_limit = pci_moving_config32(dev, PCI_CB_IO_LIMIT_0);
diff --git a/src/include/device/cardbus.h b/src/include/device/cardbus.h
index 38aa41cab5..07cc46a54a 100644
--- a/src/include/device/cardbus.h
+++ b/src/include/device/cardbus.h
@@ -6,6 +6,7 @@ void cardbus_read_resources(device_t dev);
unsigned int cardbus_scan_bus(struct bus *bus,
unsigned min_devfn, unsigned max_devfn, unsigned int max);
unsigned int cardbus_scan_bridge(device_t dev, unsigned int max);
+void cardbus_enable_resources(device_t dev);
extern struct device_operations default_cardbus_ops_bus;
diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb
index decbd0e3b1..6dc4b3d79a 100644
--- a/src/mainboard/via/epia-m/Config.lb
+++ b/src/mainboard/via/epia-m/Config.lb
@@ -45,6 +45,7 @@ arch i386 end
driver mainboard.o
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
+object vgabios.o
if HAVE_ACPI_TABLES
object fadt.o
@@ -133,11 +134,6 @@ config chip.h
chip northbridge/via/vt8623
device pci_domain 0 on
chip southbridge/via/vt8235
- register "enable_usb" = "0"
- register "enable_native_ide" = "0"
- register "enable_com_ports" = "1"
- register "enable_keyboard" = "0"
- register "enable_nvram" = "1"
device pci 10.0 on end # USB 1.1
device pci 10.1 on end # USB 1.1
@@ -151,7 +147,7 @@ chip northbridge/via/vt8623
irq 0x70 = 6
drq 0x74 = 2
end
- device pnp 2e.1 off # Parallel Port
+ device pnp 2e.1 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
@@ -178,10 +174,16 @@ chip northbridge/via/vt8623
device pci 12.0 on end # Ethernet
end
# This is on the EPIA MII, not the M.
-# chip southbridge/ricoh/rl5c476
-# end
+ chip southbridge/ricoh/rl5c476
+ register "enable_cf" = "1"
+ device pci 0a.0 on end
+ device pci 0a.1 on end
+ end
end
- chip cpu/via/model_centaur
+ device apic_cluster 0 on
+ chip cpu/via/model_centaur
+ device apic 0 on end
+ end
end
end
diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb
index 4184236c5c..6c3193e78d 100644
--- a/src/mainboard/via/epia-m/Options.lb
+++ b/src/mainboard/via/epia-m/Options.lb
@@ -36,6 +36,8 @@ uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_UDELAY_TSC
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_CONSOLE_VGA
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
@@ -43,6 +45,8 @@ default ROM_SIZE = 256*1024
###
### Build options
###
+default CONFIG_PCI_ROM_RUN=0
+default CONFIG_CONSOLE_VGA=0
##
## Build code for the fallback boot
@@ -70,6 +74,13 @@ default HAVE_HARD_RESET=1
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
+
+##
+## Build code to load acpi tables
+##
+default HAVE_ACPI_TABLES=1
+
+
##
## Build code to export a CMOS option table
##
diff --git a/src/mainboard/via/epia-m/auto.c b/src/mainboard/via/epia-m/auto.c
index 7d08de87bb..c69b7bf101 100644
--- a/src/mainboard/via/epia-m/auto.c
+++ b/src/mainboard/via/epia-m/auto.c
@@ -68,7 +68,7 @@ static void enable_mainboard_devices(void)
die("Southbridge not found!!!\n");
}
pci_write_config8(dev, 0x50, 0x80);
- pci_write_config8(dev, 0x51, 0x1F);
+ pci_write_config8(dev, 0x51, 0x1f);
#if 0
// This early setup switches IDE into compatibility mode before PCI gets
// // a chance to assign I/Os
@@ -141,14 +141,8 @@ static void main(unsigned long bist)
print_debug(" Enabling shadow ram\r\n");
enable_shadow_ram();
- /*
- memreset_setup();
- this is way more generic than we need.
- sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
- */
- sdram_set_registers((const struct mem_controller *) 0);
- sdram_set_spd_registers((const struct mem_controller *) 0);
- sdram_enable(0, (const struct mem_controller *) 0);
+
+ ddr_ram_setup((const struct mem_controller *)0);
/* Check all of memory */
#if 0
diff --git a/src/mainboard/via/epia-m/dsdt.asl b/src/mainboard/via/epia-m/dsdt.asl
new file mode 100644
index 0000000000..2fcb77ed3a
--- /dev/null
+++ b/src/mainboard/via/epia-m/dsdt.asl
@@ -0,0 +1,256 @@
+/*
+ * Minimalist ACPI DSDT table for EPIA-M / MII
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ *
+ *
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
+{
+ /*
+ * Define the main processor
+ */
+ Scope (\_PR)
+ {
+ Processor (\_PR.CPU0, 0x00, 0x00000410, 0x06) {}
+ }
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * any others would involve declaring the wake up methods
+ */
+ Name (\_S0, Package () {0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () {0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Define how interrupt Link A is plumbed in */
+ Device (LNKA)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x01)
+ /* Status - always return ready */
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0B)
+ }
+ /* Current Resources - return irq set up in BIOS */
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5}
+ })
+ Return (BUFF)
+ }
+ /* Possible Resources - return the range of irqs
+ * we are using for PCI - only here to keep Linux ACPI
+ * happy
+ */
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5,9,10}
+ })
+ Return (BUFF)
+ }
+ /* Set Resources - dummy function to keep Linux ACPI happy
+ * Linux is more than happy not to tinker with irq
+ * assignments as long as the CRS and STA functions
+ * return good values
+ */
+ Method (_SRS, 1, NotSerialized ) {}
+ /* Disable - dummy function to keep Linux ACPI happy */
+ Method (_DIS, 0, NotSerialized ) {}
+
+ } // End of LNKA
+
+ /* Define how interrupt Link B is plumbed in */
+ Device (LNKB)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x02)
+ /* Status - always return ready */
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0B)
+ }
+ /* Current Resources - return irq set up in BIOS */
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {9}
+ })
+ Return (BUFF)
+ }
+ /* Possible Resources - return the range of irqs
+ * we are using for PCI - only here to keep Linux ACPI
+ * happy
+ */
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5,9,10}
+ })
+ Return (BUFF)
+ }
+ /* Set Resources - dummy function to keep Linux ACPI happy
+ * Linux is more than happy not to tinker with irq
+ * assignments as long as the CRS and STA functions
+ * return good values
+ */
+ Method (_SRS, 1, NotSerialized ) {}
+ /* Disable - dummy function to keep Linux ACPI happy */
+ Method (_DIS, 0, NotSerialized ) {}
+
+ } // End of LNKB
+
+ /* Define how interrupt Link C is plumbed in */
+ Device (LNKC)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x03)
+ /* Status - always return ready */
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0B)
+ }
+ /* Current Resources - return irq set up in BIOS */
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {9}
+ })
+ Return (BUFF)
+ }
+ /* Possible Resources - return the range of irqs
+ * we are using for PCI - only here to keep Linux ACPI
+ * happy
+ */
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5,9,10}
+ })
+ Return (BUFF)
+ }
+ /* Set Resources - dummy function to keep Linux ACPI happy
+ * Linux is more than happy not to tinker with irq
+ * assignments as long as the CRS and STA functions
+ * return good values
+ */
+ Method (_SRS, 1, NotSerialized ) {}
+ /* Disable - dummy function to keep Linux ACPI happy */
+ Method (_DIS, 0, NotSerialized ) {}
+
+ } // End of LNKC
+
+ /* Define how interrupt Link D is plumbed in */
+ Device (LNKD)
+ {
+ Name (_HID, EisaId ("PNP0C0F"))
+ Name (_UID, 0x04)
+ /* Status - always return ready */
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0B)
+ }
+ /* Current Resources - return irq set up in BIOS */
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5}
+ })
+ Return (BUFF)
+ }
+ /* Possible Resources - return the range of irqs
+ * we are using for PCI - only here to keep Linux ACPI
+ * happy
+ */
+ Method (_PRS, 0, NotSerialized)
+ {
+ Name (BUFF, ResourceTemplate ()
+ {
+ IRQ (Level, ActiveLow, Shared) {5,9,10}
+ })
+ Return (BUFF)
+ }
+ /* Set Resources - dummy function to keep Linux ACPI happy
+ * Linux is more than happy not to tinker with irq
+ * assignments as long as the CRS and STA functions
+ * return good values
+ */
+ Method (_SRS, 1, NotSerialized ) {}
+ /* Disable - dummy function to keep Linux ACPI happy */
+ Method (_DIS, 0, NotSerialized ) {}
+
+ } // End of LNKD
+
+
+ /* top PCI device */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ /* PCI Routing Table */
+ Name (_PRT, Package () {
+ Package () {0x000AFFFF, 0x00, LNKD, 0x00}, // Cardbus Link D
+ Package () {0x000AFFFF, 0x01, LNKA, 0x00}, // Cardbus Link A
+ Package () {0x000AFFFF, 0x02, LNKB, 0x00}, // Cardbus Link B
+ Package () {0x000AFFFF, 0x03, LNKC, 0x00}, // Cardbus Link C
+
+ Package () {0x000DFFFF, 0x00, LNKB, 0x00}, // Firewire Link B
+ Package () {0x000DFFFF, 0x01, LNKC, 0x00}, // Firewire Link C
+ Package () {0x000DFFFF, 0x02, LNKD, 0x00}, // Firewire Linc D
+ Package () {0x000DFFFF, 0x03, LNKA, 0x00}, // Firewire Link A
+
+ Package () {0x0010FFFF, 0x00, LNKA, 0x00}, // USB Link A
+ Package () {0x0010FFFF, 0x01, LNKB, 0x00}, // USB Link B
+ Package () {0x0010FFFF, 0x02, LNKC, 0x00}, // USB Link C
+ Package () {0x0010FFFF, 0x03, LNKD, 0x00}, // USB Link D
+
+ Package () {0x0011FFFF, 0x00, LNKA, 0x00}, // vt8623 Link A
+ Package () {0x0011FFFF, 0x01, LNKB, 0x00}, // vt8623 Link B
+ Package () {0x0011FFFF, 0x02, LNKC, 0x00}, // vt8623 Link C
+ Package () {0x0011FFFF, 0x03, LNKD, 0x00}, // vt8623 Link D
+
+ Package () {0x0012FFFF, 0x00, LNKA, 0x00}, // LAN Link A
+ Package () {0x0012FFFF, 0x01, LNKB, 0x00}, // LAN Link B
+ Package () {0x0012FFFF, 0x02, LNKC, 0x00}, // LAN Link C
+ Package () {0x0012FFFF, 0x03, LNKD, 0x00}, // LAN Link D
+
+ Package () {0x0013FFFF, 0x00, LNKA, 0x00}, // Riser slot LinkA
+ Package () {0x0013FFFF, 0x01, LNKB, 0x00}, // Riser slot LinkB
+ Package () {0x0013FFFF, 0x02, LNKC, 0x00}, // Riser slot LinkC
+ Package () {0x0013FFFF, 0x03, LNKD, 0x00}, // Riser slot LinkD
+
+ Package () {0x0014FFFF, 0x00, LNKB, 0x00}, // Slot 1, Link B
+ Package () {0x0014FFFF, 0x01, LNKC, 0x00}, // Slot 1, Link C
+ Package () {0x0014FFFF, 0x02, LNKD, 0x00}, // Slot 1, Link D
+ Package () {0x0014FFFF, 0x03, LNKA, 0x00}, // Slot 1, Link A
+
+ Package () {0x0001FFFF, 0x00, LNKA, 0x00}, // VGA Link A
+ Package () {0x0001FFFF, 0x01, LNKB, 0x00}, // VGA Link B
+ Package () {0x0001FFFF, 0x02, LNKC, 0x00}, // VGA Link C
+ Package () {0x0001FFFF, 0x03, LNKD, 0x00} // VGA Link D
+
+ })
+
+
+ } // End of PCI0
+
+ } // End of _SB
+
+} // End of Definition Block
+
diff --git a/src/mainboard/via/epia-m/dsdt.c b/src/mainboard/via/epia-m/dsdt.c
new file mode 100644
index 0000000000..62b0f3dab0
--- /dev/null
+++ b/src/mainboard/via/epia-m/dsdt.c
@@ -0,0 +1,142 @@
+/*
+ *
+ * Intel ACPI Component Architecture
+ * ASL Optimizing Compiler / AML Disassembler version 20040715 [Aug 16 2004]
+ * Copyright (C) 2000 - 2004 Intel Corporation
+ * Supports ACPI Specification Revision 2.0c
+ *
+ * Compilation of "dsdt.asl" - Thu Oct 27 09:25:57 2005
+ *
+ * C source code output
+ *
+ */
+unsigned char AmlCode[] =
+{
+ 0x44,0x53,0x44,0x54,0xF0,0x03,0x00,0x00, /* 00000000 "DSDT...." */
+ 0x01,0x11,0x4C,0x58,0x42,0x49,0x4F,0x53, /* 00000008 "..LXBIOS" */
+ 0x4C,0x58,0x42,0x2D,0x44,0x53,0x44,0x54, /* 00000010 "LXB-DSDT" */
+ 0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */
+ 0x15,0x07,0x04,0x20,0x10,0x12,0x5F,0x50, /* 00000020 "... .._P" */
+ 0x52,0x5F,0x5B,0x83,0x0B,0x43,0x50,0x55, /* 00000028 "R_[..CPU" */
+ 0x30,0x00,0x10,0x04,0x00,0x00,0x06,0x08, /* 00000030 "0......." */
+ 0x5F,0x53,0x30,0x5F,0x12,0x06,0x04,0x00, /* 00000038 "_S0_...." */
+ 0x00,0x00,0x00,0x08,0x5F,0x53,0x35,0x5F, /* 00000040 "...._S5_" */
+ 0x12,0x08,0x04,0x0A,0x02,0x0A,0x02,0x00, /* 00000048 "........" */
+ 0x00,0x10,0x4E,0x39,0x5F,0x53,0x42,0x5F, /* 00000050 "..N9_SB_" */
+ 0x5B,0x82,0x44,0x06,0x4C,0x4E,0x4B,0x41, /* 00000058 "[.D.LNKA" */
+ 0x08,0x5F,0x48,0x49,0x44,0x0C,0x41,0xD0, /* 00000060 "._HID.A." */
+ 0x0C,0x0F,0x08,0x5F,0x55,0x49,0x44,0x01, /* 00000068 "..._UID." */
+ 0x14,0x09,0x5F,0x53,0x54,0x41,0x00,0xA4, /* 00000070 ".._STA.." */
+ 0x0A,0x0B,0x14,0x1A,0x5F,0x43,0x52,0x53, /* 00000078 "...._CRS" */
+ 0x00,0x08,0x42,0x55,0x46,0x46,0x11,0x09, /* 00000080 "..BUFF.." */
+ 0x0A,0x06,0x23,0x20,0x00,0x18,0x79,0x00, /* 00000088 "..# ..y." */
+ 0xA4,0x42,0x55,0x46,0x46,0x14,0x1A,0x5F, /* 00000090 ".BUFF.._" */
+ 0x50,0x52,0x53,0x00,0x08,0x42,0x55,0x46, /* 00000098 "PRS..BUF" */
+ 0x46,0x11,0x09,0x0A,0x06,0x23,0x20,0x06, /* 000000A0 "F....# ." */
+ 0x18,0x79,0x00,0xA4,0x42,0x55,0x46,0x46, /* 000000A8 ".y..BUFF" */
+ 0x14,0x06,0x5F,0x53,0x52,0x53,0x01,0x14, /* 000000B0 ".._SRS.." */
+ 0x06,0x5F,0x44,0x49,0x53,0x00,0x5B,0x82, /* 000000B8 "._DIS.[." */
+ 0x45,0x06,0x4C,0x4E,0x4B,0x42,0x08,0x5F, /* 000000C0 "E.LNKB._" */
+ 0x48,0x49,0x44,0x0C,0x41,0xD0,0x0C,0x0F, /* 000000C8 "HID.A..." */
+ 0x08,0x5F,0x55,0x49,0x44,0x0A,0x02,0x14, /* 000000D0 "._UID..." */
+ 0x09,0x5F,0x53,0x54,0x41,0x00,0xA4,0x0A, /* 000000D8 "._STA..." */
+ 0x0B,0x14,0x1A,0x5F,0x43,0x52,0x53,0x00, /* 000000E0 "..._CRS." */
+ 0x08,0x42,0x55,0x46,0x46,0x11,0x09,0x0A, /* 000000E8 ".BUFF..." */
+ 0x06,0x23,0x00,0x02,0x18,0x79,0x00,0xA4, /* 000000F0 ".#...y.." */
+ 0x42,0x55,0x46,0x46,0x14,0x1A,0x5F,0x50, /* 000000F8 "BUFF.._P" */
+ 0x52,0x53,0x00,0x08,0x42,0x55,0x46,0x46, /* 00000100 "RS..BUFF" */
+ 0x11,0x09,0x0A,0x06,0x23,0x20,0x06,0x18, /* 00000108 "....# .." */
+ 0x79,0x00,0xA4,0x42,0x55,0x46,0x46,0x14, /* 00000110 "y..BUFF." */
+ 0x06,0x5F,0x53,0x52,0x53,0x01,0x14,0x06, /* 00000118 "._SRS..." */
+ 0x5F,0x44,0x49,0x53,0x00,0x5B,0x82,0x45, /* 00000120 "_DIS.[.E" */
+ 0x06,0x4C,0x4E,0x4B,0x43,0x08,0x5F,0x48, /* 00000128 ".LNKC._H" */
+ 0x49,0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08, /* 00000130 "ID.A...." */
+ 0x5F,0x55,0x49,0x44,0x0A,0x03,0x14,0x09, /* 00000138 "_UID...." */
+ 0x5F,0x53,0x54,0x41,0x00,0xA4,0x0A,0x0B, /* 00000140 "_STA...." */
+ 0x14,0x1A,0x5F,0x43,0x52,0x53,0x00,0x08, /* 00000148 ".._CRS.." */
+ 0x42,0x55,0x46,0x46,0x11,0x09,0x0A,0x06, /* 00000150 "BUFF...." */
+ 0x23,0x00,0x02,0x18,0x79,0x00,0xA4,0x42, /* 00000158 "#...y..B" */
+ 0x55,0x46,0x46,0x14,0x1A,0x5F,0x50,0x52, /* 00000160 "UFF.._PR" */
+ 0x53,0x00,0x08,0x42,0x55,0x46,0x46,0x11, /* 00000168 "S..BUFF." */
+ 0x09,0x0A,0x06,0x23,0x20,0x06,0x18,0x79, /* 00000170 "...# ..y" */
+ 0x00,0xA4,0x42,0x55,0x46,0x46,0x14,0x06, /* 00000178 "..BUFF.." */
+ 0x5F,0x53,0x52,0x53,0x01,0x14,0x06,0x5F, /* 00000180 "_SRS..._" */
+ 0x44,0x49,0x53,0x00,0x5B,0x82,0x45,0x06, /* 00000188 "DIS.[.E." */
+ 0x4C,0x4E,0x4B,0x44,0x08,0x5F,0x48,0x49, /* 00000190 "LNKD._HI" */
+ 0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08,0x5F, /* 00000198 "D.A...._" */
+ 0x55,0x49,0x44,0x0A,0x04,0x14,0x09,0x5F, /* 000001A0 "UID...._" */
+ 0x53,0x54,0x41,0x00,0xA4,0x0A,0x0B,0x14, /* 000001A8 "STA....." */
+ 0x1A,0x5F,0x43,0x52,0x53,0x00,0x08,0x42, /* 000001B0 "._CRS..B" */
+ 0x55,0x46,0x46,0x11,0x09,0x0A,0x06,0x23, /* 000001B8 "UFF....#" */
+ 0x20,0x00,0x18,0x79,0x00,0xA4,0x42,0x55, /* 000001C0 " ..y..BU" */
+ 0x46,0x46,0x14,0x1A,0x5F,0x50,0x52,0x53, /* 000001C8 "FF.._PRS" */
+ 0x00,0x08,0x42,0x55,0x46,0x46,0x11,0x09, /* 000001D0 "..BUFF.." */
+ 0x0A,0x06,0x23,0x20,0x06,0x18,0x79,0x00, /* 000001D8 "..# ..y." */
+ 0xA4,0x42,0x55,0x46,0x46,0x14,0x06,0x5F, /* 000001E0 ".BUFF.._" */
+ 0x53,0x52,0x53,0x01,0x14,0x06,0x5F,0x44, /* 000001E8 "SRS..._D" */
+ 0x49,0x53,0x00,0x5B,0x82,0x4B,0x1F,0x50, /* 000001F0 "IS.[.K.P" */
+ 0x43,0x49,0x30,0x08,0x5F,0x48,0x49,0x44, /* 000001F8 "CI0._HID" */
+ 0x0C,0x41,0xD0,0x0A,0x03,0x08,0x5F,0x41, /* 00000200 ".A...._A" */
+ 0x44,0x52,0x00,0x08,0x5F,0x55,0x49,0x44, /* 00000208 "DR.._UID" */
+ 0x00,0x08,0x5F,0x42,0x42,0x4E,0x00,0x08, /* 00000210 ".._BBN.." */
+ 0x5F,0x50,0x52,0x54,0x12,0x43,0x1D,0x20, /* 00000218 "_PRT.C. " */
+ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x0A,0x00, /* 00000220 "........" */
+ 0x00,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0D, /* 00000228 ".LNKD..." */
+ 0x04,0x0C,0xFF,0xFF,0x0A,0x00,0x01,0x4C, /* 00000230 ".......L" */
+ 0x4E,0x4B,0x41,0x00,0x12,0x0E,0x04,0x0C, /* 00000238 "NKA....." */
+ 0xFF,0xFF,0x0A,0x00,0x0A,0x02,0x4C,0x4E, /* 00000240 "......LN" */
+ 0x4B,0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF, /* 00000248 "KB......" */
+ 0xFF,0x0A,0x00,0x0A,0x03,0x4C,0x4E,0x4B, /* 00000250 ".....LNK" */
+ 0x43,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000258 "C......." */
+ 0x0D,0x00,0x00,0x4C,0x4E,0x4B,0x42,0x00, /* 00000260 "...LNKB." */
+ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x0D,0x00, /* 00000268 "........" */
+ 0x01,0x4C,0x4E,0x4B,0x43,0x00,0x12,0x0E, /* 00000270 ".LNKC..." */
+ 0x04,0x0C,0xFF,0xFF,0x0D,0x00,0x0A,0x02, /* 00000278 "........" */
+ 0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0E,0x04, /* 00000280 "LNKD...." */
+ 0x0C,0xFF,0xFF,0x0D,0x00,0x0A,0x03,0x4C, /* 00000288 ".......L" */
+ 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 00000290 "NKA....." */
+ 0xFF,0xFF,0x10,0x00,0x00,0x4C,0x4E,0x4B, /* 00000298 ".....LNK" */
+ 0x41,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 000002A0 "A......." */
+ 0x10,0x00,0x01,0x4C,0x4E,0x4B,0x42,0x00, /* 000002A8 "...LNKB." */
+ 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x10,0x00, /* 000002B0 "........" */
+ 0x0A,0x02,0x4C,0x4E,0x4B,0x43,0x00,0x12, /* 000002B8 "..LNKC.." */
+ 0x0E,0x04,0x0C,0xFF,0xFF,0x10,0x00,0x0A, /* 000002C0 "........" */
+ 0x03,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0D, /* 000002C8 ".LNKD..." */
+ 0x04,0x0C,0xFF,0xFF,0x11,0x00,0x00,0x4C, /* 000002D0 ".......L" */
+ 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 000002D8 "NKA....." */
+ 0xFF,0xFF,0x11,0x00,0x01,0x4C,0x4E,0x4B, /* 000002E0 ".....LNK" */
+ 0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF, /* 000002E8 "B......." */
+ 0x11,0x00,0x0A,0x02,0x4C,0x4E,0x4B,0x43, /* 000002F0 "....LNKC" */
+ 0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x11, /* 000002F8 "........" */
+ 0x00,0x0A,0x03,0x4C,0x4E,0x4B,0x44,0x00, /* 00000300 "...LNKD." */
+ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x12,0x00, /* 00000308 "........" */
+ 0x00,0x4C,0x4E,0x4B,0x41,0x00,0x12,0x0D, /* 00000310 ".LNKA..." */
+ 0x04,0x0C,0xFF,0xFF,0x12,0x00,0x01,0x4C, /* 00000318 ".......L" */
+ 0x4E,0x4B,0x42,0x00,0x12,0x0E,0x04,0x0C, /* 00000320 "NKB....." */
+ 0xFF,0xFF,0x12,0x00,0x0A,0x02,0x4C,0x4E, /* 00000328 "......LN" */
+ 0x4B,0x43,0x00,0x12,0x0E,0x04,0x0C,0xFF, /* 00000330 "KC......" */
+ 0xFF,0x12,0x00,0x0A,0x03,0x4C,0x4E,0x4B, /* 00000338 ".....LNK" */
+ 0x44,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000340 "D......." */
+ 0x13,0x00,0x00,0x4C,0x4E,0x4B,0x41,0x00, /* 00000348 "...LNKA." */
+ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x13,0x00, /* 00000350 "........" */
+ 0x01,0x4C,0x4E,0x4B,0x42,0x00,0x12,0x0E, /* 00000358 ".LNKB..." */
+ 0x04,0x0C,0xFF,0xFF,0x13,0x00,0x0A,0x02, /* 00000360 "........" */
+ 0x4C,0x4E,0x4B,0x43,0x00,0x12,0x0E,0x04, /* 00000368 "LNKC...." */
+ 0x0C,0xFF,0xFF,0x13,0x00,0x0A,0x03,0x4C, /* 00000370 ".......L" */
+ 0x4E,0x4B,0x44,0x00,0x12,0x0D,0x04,0x0C, /* 00000378 "NKD....." */
+ 0xFF,0xFF,0x14,0x00,0x00,0x4C,0x4E,0x4B, /* 00000380 ".....LNK" */
+ 0x42,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000388 "B......." */
+ 0x14,0x00,0x01,0x4C,0x4E,0x4B,0x43,0x00, /* 00000390 "...LNKC." */
+ 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x14,0x00, /* 00000398 "........" */
+ 0x0A,0x02,0x4C,0x4E,0x4B,0x44,0x00,0x12, /* 000003A0 "..LNKD.." */
+ 0x0E,0x04,0x0C,0xFF,0xFF,0x14,0x00,0x0A, /* 000003A8 "........" */
+ 0x03,0x4C,0x4E,0x4B,0x41,0x00,0x12,0x0D, /* 000003B0 ".LNKA..." */
+ 0x04,0x0C,0xFF,0xFF,0x01,0x00,0x00,0x4C, /* 000003B8 ".......L" */
+ 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 000003C0 "NKA....." */
+ 0xFF,0xFF,0x01,0x00,0x01,0x4C,0x4E,0x4B, /* 000003C8 ".....LNK" */
+ 0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF, /* 000003D0 "B......." */
+ 0x01,0x00,0x0A,0x02,0x4C,0x4E,0x4B,0x43, /* 000003D8 "....LNKC" */
+ 0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x01, /* 000003E0 "........" */
+ 0x00,0x0A,0x03,0x4C,0x4E,0x4B,0x44,0x00, /* 000003E8 "...LNKD." */
+
+};
diff --git a/src/mainboard/via/epia-m/fadt.c b/src/mainboard/via/epia-m/fadt.c
index 3d9873e7b6..702d556988 100644
--- a/src/mainboard/via/epia-m/fadt.c
+++ b/src/mainboard/via/epia-m/fadt.c
@@ -15,8 +15,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
diff --git a/src/mainboard/via/epia-m/failover.c b/src/mainboard/via/epia-m/failover.c
index bdcb9eaed2..35317fc7b2 100644
--- a/src/mainboard/via/epia-m/failover.c
+++ b/src/mainboard/via/epia-m/failover.c
@@ -8,6 +8,7 @@
static unsigned long main(unsigned long bist)
{
+#if 0
/* This is the primary cpu how should I boot? */
if (do_normal_boot()) {
goto normal_image;
@@ -28,5 +29,6 @@ static unsigned long main(unsigned long bist)
: /* clobbers */
);
fallback_image:
+#endif
return bist;
}
diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c
index 9eb7b3705b..26e5916f01 100644
--- a/src/mainboard/via/epia-m/mainboard.c
+++ b/src/mainboard/via/epia-m/mainboard.c
@@ -25,7 +25,7 @@ static void vga_fixup(void) {
}
-static void write_protect_vgabios(void)
+void write_protect_vgabios(void)
{
device_t dev;
diff --git a/src/mainboard/via/epia-m/vgabios.c b/src/mainboard/via/epia-m/vgabios.c
new file mode 100644
index 0000000000..67620eaa2e
--- /dev/null
+++ b/src/mainboard/via/epia-m/vgabios.c
@@ -0,0 +1,861 @@
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#undef __KERNEL__
+#include <arch/io.h>
+//#include <printk.h>
+#include <string.h>
+#include "vgachip.h"
+
+/* vgabios.c. Derived from: */
+
+/*------------------------------------------------------------ -*- C -*-
+ * 2 Kernel Monte a.k.a. Linux loading Linux on x86
+ *
+ * Erik Arjan Hendriks <hendriks@lanl.gov>
+ *
+ * This version is a derivative of the original two kernel monte
+ * which is (C) 2000 Scyld.
+ *
+ * Copyright (C) 2000 Scyld Computing Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Portions related to the alpha architecture are:
+ *
+ * Copyright(C) 2001 University of California. LA-CC Number 01-67.
+ * This software has been authored by an employee or employees of the
+ * University of California, operator of the Los Alamos National
+ * Laboratory under Contract No. W-7405-ENG-36 with the U.S.
+ * Department of Energy. The U.S. Government has rights to use,
+ * reproduce, and distribute this software. If the software is
+ * modified to produce derivative works, such modified software should
+ * be clearly marked, so as not to confuse it with the version
+ * available from LANL.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by
+ * reference to http://www.gnu.org/licenses/gpl.html.
+ *
+ * This software is provided by the author(s) "as is" and any express
+ * or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose
+ * are disclaimed. In no event shall the author(s) be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential
+ * damages (including, but not limited to, procurement of substitute
+ * goods or services; loss of use, data, or profits; or business
+ * interruption) however caused and on any theory of liability,
+ * whether in contract, strict liability, or tort (including
+ * negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * $Id: vgabios.c,v 1.5 2004/10/06 17:33:52 rminnich Exp $
+ *--------------------------------------------------------------------*/
+
+/* Modified to be a self sufficient plug in so that it can be used
+ without reliance on other parts of core Linuxbios
+ (C) 2005 Nick.Barker9@btinternet.com
+
+ Used initially for epia-m where there are problems getting the bios
+ emulator to successfully run this bios.
+*/
+
+/* Declare a temporary global descriptor table - necessary because the
+ Core part of the bios no longer sets up any 16 bit segments */
+__asm__ (
+ /* pointer to original gdt */
+ "gdtarg: \n\t"
+ ".word gdt_limit \n\t"
+ ".long gdt \n\t"
+
+ /* compute the table limit */
+ "__mygdt_limit = __mygdt_end - __mygdt - 1 \n\t"
+
+ "__mygdtaddr: \n\t"
+ ".word __mygdt_limit \n\t"
+ ".long __mygdt \n\t"
+
+
+ "__mygdt: \n\t"
+ /* selgdt 0, unused */
+ ".word 0x0000, 0x0000 \n\t"
+ ".byte 0x00, 0x00, 0x00, 0x00 \n\t"
+
+ /* selgdt 8, unused */
+ ".word 0x0000, 0x0000 \n\t"
+ ".byte 0x00, 0x00, 0x00, 0x00 \n\t"
+
+ /* selgdt 0x10, flat code segment */
+ ".word 0xffff, 0x0000 \n\t"
+ ".byte 0x00, 0x9b, 0xcf, 0x00 \n\t"
+
+ /* selgdt 0x18, flat data segment */
+ ".word 0xffff, 0x0000 \n\t"
+ ".byte 0x00, 0x93, 0xcf, 0x00 \n\t"
+
+ /* selgdt 0x20, unused */
+ ".word 0x0000, 0x0000 \n\t"
+ ".byte 0x00, 0x00, 0x00, 0x00 \n\t"
+
+ /*selgdt 0x28 16-bit 64k code at 0x00000000 */
+ ".word 0xffff, 0x0000 \n\t"
+ ".byte 0, 0x9a, 0, 0 \n\t"
+
+ /* selgdt 0x30 16-bit 64k data at 0x00000000 */
+ ".word 0xffff, 0x0000 \n\t"
+ ".byte 0, 0x92, 0, 0 \n\t"
+
+ "__mygdt_end: \n\t"
+);
+
+/* Declare a pointer to where our idt is going to be i.e. at mem zero */
+__asm__ (
+ "__myidt: \n"
+ " .word 1023 \n"
+ " .long 0 \n"
+ " .word 0 \n"
+);
+
+/* The address arguments to this function are PHYSICAL ADDRESSES */
+static void real_mode_switch_call_vga(unsigned long devfn)
+{
+ __asm__ __volatile__ (
+ // paranoia -- does ecx get saved? not sure. This is
+ // the easiest safe thing to do.
+ " pushal\n"
+ /* save the stack */
+ " mov %esp, __stack\n"
+ " jmp 1f\n"
+ "__stack: .long 0\n"
+ "1:\n"
+ /* get devfn into %ecx */
+ " movl %esp, %ebp\n"
+ " movl 8(%ebp), %ecx\n"
+ /* load 'our' gdt */
+ " lgdt %cs:__mygdtaddr \n\t"
+
+ /* This configures CS properly for real mode. */
+ " ljmp $0x28, $__rms_16bit\n"
+ "__rms_16bit: \n"
+ ".code16 \n"
+ /* 16 bit code from here on... */
+
+ /* Load the segment registers w/ properly configured segment
+ * descriptors. They will retain these configurations (limits,
+ * writability, etc.) once protected mode is turned off. */
+ " mov $0x30, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+
+ /* Turn off protection (bit 0 in CR0) */
+ " movl %cr0, %eax \n"
+ " andl $0xFFFFFFFE, %eax \n"
+ " movl %eax, %cr0 \n"
+
+ /* Now really going into real mode */
+ " ljmp $0, $__rms_real \n"
+ "__rms_real: \n"
+
+ // put the stack at the end of page zero.
+ // that way we can easily share it between real and protected,
+ // since the 16-bit ESP at segment 0 will work for any case.
+ /* Setup a stack */
+ " mov $0x0, %ax \n"
+ " mov %ax, %ss \n"
+ " movl $0x1000, %eax \n"
+ " movl %eax, %esp \n"
+
+ /* Load our 16 it idt */
+ " xor %ax, %ax \n"
+ " mov %ax, %ds \n"
+ " lidt __myidt \n"
+
+
+ /* Dump zeros in the other segregs */
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov $0x40, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %cx, %ax \n"
+ /* go run the code */
+ " .byte 0x9a, 0x03, 0, 0, 0xc0 \n"
+
+ /* if we got here, just about done.
+ * Need to get back to protected mode */
+ "movl %cr0, %eax\n"
+ "orl $0x0000001, %eax\n" /* PE = 1 */
+ "movl %eax, %cr0\n"
+
+ /* Now that we are in protected mode jump to a 32 bit code segment. */
+ "data32 ljmp $0x10, $vgarestart\n"
+ "vgarestart:\n"
+ ".code32\n"
+ " movw $0x18, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+
+ /* restore proper gdt and idt */
+ " lgdt %cs:gdtarg \n"
+ " lidt idtarg \n"
+ ".globl vga_exit\n"
+ "vga_exit:\n"
+ " mov __stack, %esp\n"
+ " popal\n"
+ );
+}
+
+__asm__ (".text\n""real_mode_switch_end:\n");
+extern char real_mode_switch_end[];
+
+/* call vga bios int 10 function 0x4f14 to enable main console
+ epia-m does not always autosence the main console so forcing it on is good !! */
+
+void vga_enable_console()
+{
+ __asm__ __volatile__ (
+ // paranoia -- does ecx get saved? not sure. This is
+ // the easiest safe thing to do.
+ " pushal\n"
+ /* save the stack */
+ " mov %esp, __stack\n"
+
+ /* load 'our' gdt */
+ " lgdt %cs:__mygdtaddr \n\t"
+
+ /* This configures CS properly for real mode. */
+ " ljmp $0x28, $__vga_ec_16bit\n"
+ "__vga_ec_16bit: \n"
+ ".code16 \n"
+ /* 16 bit code from here on... */
+
+ /* Load the segment registers w/ properly configured segment
+ * descriptors. They will retain these configurations (limits,
+ * writability, etc.) once protected mode is turned off. */
+ " mov $0x30, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+
+ /* Turn off protection (bit 0 in CR0) */
+ " movl %cr0, %eax \n"
+ " andl $0xFFFFFFFE, %eax \n"
+ " movl %eax, %cr0 \n"
+
+ /* Now really going into real mode */
+ " ljmp $0, $__vga_ec_real \n"
+ "__vga_ec_real: \n"
+
+ // put the stack at the end of page zero.
+ // that way we can easily share it between real and protected,
+ // since the 16-bit ESP at segment 0 will work for any case.
+ /* Setup a stack */
+ " mov $0x0, %ax \n"
+ " mov %ax, %ss \n"
+ " movl $0x1000, %eax \n"
+ " movl %eax, %esp \n"
+ /* debugging for RGM */
+ " mov $0x11, %al \n"
+ " outb %al, $0x80\n"
+
+ /* Load our 16 it idt */
+ " xor %ax, %ax \n"
+ " mov %ax, %ds \n"
+ " lidt __myidt \n"
+
+ /* Dump zeros in the other segregs */
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+
+ /* ask bios to enable main console */
+ /* set up for int 10 call - values found from X server bios call routines */
+ " movw $0x4f14,%ax \n"
+ " movw $0x8003,%bx \n"
+ " movw $1, %cx \n"
+ " movw $0, %dx \n"
+ " movw $0, %di \n"
+ " .byte 0xcd, 0x10 \n"
+ " movb $0x55, %al\noutb %al, $0x80\n"
+
+ /* if we got here, just about done.
+ * Need to get back to protected mode */
+ "movl %cr0, %eax\n"
+ "orl $0x0000001, %eax\n" /* PE = 1 */
+ "movl %eax, %cr0\n"
+
+ /* Now that we are in protected mode jump to a 32 bit code segment. */
+ "data32 ljmp $0x10, $vga_ec_restart\n"
+ "vga_ec_restart:\n"
+ ".code32\n"
+ " movw $0x18, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+
+
+ /* restore proper gdt and idt */
+ " lgdt %cs:gdtarg \n"
+ " lidt idtarg \n"
+ ".globl vga__ec_exit\n"
+ "vga_ec_exit:\n"
+ " mov __stack, %esp\n"
+ " popal\n"
+ );
+}
+
+
+void
+do_vgabios(void)
+{
+ device_t dev;
+ unsigned long busdevfn;
+ unsigned int rom = 0;
+ unsigned char *buf;
+ unsigned int size = 64*1024;
+ int i;
+
+ /* clear vga bios data area */
+ for (i=0x400; i<0x500; i++) {
+ *(unsigned char *) i = 0;
+ }
+
+ dev = dev_find_class(PCI_CLASS_DISPLAY_VGA<<8 , 0);
+
+ if (! dev) {
+ printk_debug("NO VGA FOUND\n");
+ return;
+ }
+ printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device);
+
+ /* declare rom address here - keep any config data out of the way of core LXB stuff */
+
+ rom = 0xfffc0000;
+ pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1);
+ printk_debug("rom base, size: %x\n", rom);
+
+ buf = (unsigned char *) rom;
+ if ((buf[0] == 0x55) && (buf[1] == 0xaa)) {
+ memcpy((void *) 0xc0000, buf, size);
+
+ write_protect_vgabios(); // in northbridge
+
+ // check signature again
+ buf = (unsigned char *) 0xc0000;
+ if (buf[0]==0x55 && buf[1]==0xAA) {
+ busdevfn = (dev->bus->secondary << 8) | dev->path.u.pci.devfn;
+ printk_debug("bus/devfn = %#x\n", busdevfn);
+
+ real_mode_switch_call_vga(busdevfn);
+ } else
+ printk_debug("Failed to copy VGA BIOS to 0xc0000\n");
+
+ } else
+ printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]);
+
+ pci_write_config32(dev, PCI_ROM_ADDRESS, 0);
+
+}
+
+
+// we had hoped to avoid this.
+// this is a stub IDT only. It's main purpose is to ignore calls
+// to the BIOS.
+// no longer. Dammit. We have to respond to these.
+struct realidt {
+ unsigned short offset, cs;
+};
+
+// from a handy writeup that andrey found.
+
+// handler.
+// There are some assumptions we can make here.
+// First, the Top Of Stack (TOS) is located on the top of page zero.
+// we can share this stack between real and protected mode.
+// that simplifies a lot of things ...
+// we'll just push all the registers on the stack as longwords,
+// and pop to protected mode.
+// second, since this only ever runs as part of linuxbios,
+// we know all the segment register values -- so we don't save any.
+// keep the handler that calls things small. It can do a call to
+// more complex code in linuxbios itself. This helps a lot as we don't
+// have to do address fixup in this little stub, and calls are absolute
+// so the handler is relocatable.
+void handler(void) {
+ __asm__ __volatile__ (
+ ".code16\n"
+ "idthandle:\n"
+ " pushal\n"
+ " movb $0, %al\n"
+ " ljmp $0, $callbiosint16\n"
+ "end_idthandle:\n"
+ ".code32\n"
+ );
+
+}
+
+void debughandler(void) {
+ __asm__ __volatile__ (
+ ".code16\n"
+ "debughandle:\n"
+ " pushw %cx \n"
+ " movw $250, %cx \n"
+ "dbh1: \n"
+ " loop dbh1 \n"
+ " popw %cx \n"
+ " iret \n"
+ "end_debughandle:\n"
+ ".code32\n"
+ );
+
+}
+
+// Calling conventions. The first C function is called with this stuff
+// on the stack. They look like value parameters, but note that if you
+// modify them they will go back to the INTx function modified.
+// the C function will call the biosint function with these as
+// REFERENCE parameters. In this way, we can easily get
+// returns back to the INTx caller (i.e. vgabios)
+void callbiosint(void) {
+ __asm__ __volatile__ (
+ ".code16\n"
+ "callbiosint16:\n"
+ " push %ds \n"
+ " push %es \n"
+ " push %fs \n"
+ " push %gs \n"
+ // clean up the int #. To save space we put it in the lower
+ // byte. But the top 24 bits are junk.
+ "andl $0xff, %eax\n"
+ // this push does two things:
+ // - put the INT # on the stack as a parameter
+ // - provides us with a temp for the %cr0 mods.
+ "pushl %eax\n"
+ "movl %cr0, %eax\n"
+ //"andl $0x7FFAFFD1, %eax\n" /* PG,AM,WP,NE,TS,EM,MP = 0 */
+ //"orl $0x60000001, %eax\n" /* CD, NW, PE = 1 */
+ "orl $0x00000001, %eax\n" /* PE = 1 */
+ "movl %eax, %cr0\n"
+ /* Now that we are in protected mode jump to a 32 bit code segment. */
+ "data32 ljmp $0x10, $biosprotect\n"
+ "biosprotect:\n"
+ ".code32\n"
+ " movw $0x18, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+ " lidt idtarg \n"
+ " call biosint \n"
+ // back to real mode ...
+ " ljmp $0x28, $__rms_16bit2\n"
+ "__rms_16bit2: \n"
+ ".code16 \n" /* 16 bit code from here on... */
+
+ /* Load the segment registers w/ properly configured segment
+ * descriptors. They will retain these configurations (limits,
+ * writability, etc.) once protected mode is turned off. */
+ " mov $0x30, %ax \n"
+ " mov %ax, %ds \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov %ax, %ss \n"
+
+ /* Turn off protection (bit 0 in CR0) */
+ " movl %cr0, %eax \n"
+ " andl $0xFFFFFFFE, %eax \n"
+ " movl %eax, %cr0 \n"
+
+ /* Now really going into real mode */
+ " ljmp $0, $__rms_real2 \n"
+ "__rms_real2: \n"
+
+ /* Setup a stack */
+ " mov $0x0, %ax \n"
+ " mov %ax, %ss \n"
+ /* ebugging for RGM */
+ " mov $0x11, %al \n"
+ " outb %al, $0x80\n"
+ " xor %ax, %ax \n"
+ " mov %ax, %ds \n"
+ " lidt __myidt \n"
+ " mov %ax, %es \n"
+ " mov %ax, %fs \n"
+ " mov %ax, %gs \n"
+ " mov $0x40, %ax \n"
+ " mov %ax, %ds \n"
+ // pop the INT # that you pushed earlier
+ " popl %eax\n"
+ " pop %gs \n"
+ " pop %fs \n"
+ " pop %es \n"
+ " pop %ds \n"
+ " popal\n"
+ " iret\n"
+ ".code32\n"
+ );
+}
+
+
+enum {
+ PCIBIOS = 0x1a,
+ MEMSIZE = 0x12
+};
+int
+pcibios(
+ unsigned long *pedi,
+ unsigned long *pesi,
+ unsigned long *pebp,
+ unsigned long *pesp,
+ unsigned long *pebx,
+ unsigned long *pedx,
+ unsigned long *pecx,
+ unsigned long *peax,
+ unsigned long *pflags
+ );
+int
+handleint21(
+ unsigned long *pedi,
+ unsigned long *pesi,
+ unsigned long *pebp,
+ unsigned long *pesp,
+ unsigned long *pebx,
+ unsigned long *pedx,
+ unsigned long *pecx,
+ unsigned long *peax,
+ unsigned long *pflags
+ );
+
+extern void vga_exit(void);
+
+int
+biosint(
+ unsigned long intnumber,
+ unsigned long gsfs,
+ unsigned long dses,
+ unsigned long edi,
+ unsigned long esi,
+ unsigned long ebp,
+ unsigned long esp,
+ unsigned long ebx,
+ unsigned long edx,
+ unsigned long ecx,
+ unsigned long eax,
+ unsigned long cs_ip,
+ unsigned short stackflags
+ ) {
+ unsigned long ip;
+ unsigned long cs;
+ unsigned long flags;
+ int ret = -1;
+
+ ip = cs_ip & 0xffff;
+ cs = cs_ip >> 16;
+ flags = stackflags;
+
+ printk_debug("biosint: # 0x%lx, eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n",
+ intnumber, eax, ebx, ecx, edx);
+ printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi);
+ printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags);
+ // cases in a good compiler are just as good as your own tables.
+ switch (intnumber) {
+ case 0 ... 15:
+ // These are not BIOS service, but the CPU-generated exceptions
+ printk_info("biosint: Oops, exception %u\n", intnumber);
+ if (esp < 0x1000) {
+ printk_debug("Stack contents: ");
+ while (esp < 0x1000) {
+ printk_debug("0x%04x ", *(unsigned short *) esp);
+ esp += 2;
+ }
+ printk_debug("\n");
+ }
+ printk_debug("biosint: Bailing out\n");
+ // "longjmp"
+ vga_exit();
+ break;
+
+ case PCIBIOS:
+ ret = pcibios( &edi, &esi, &ebp, &esp,
+ &ebx, &edx, &ecx, &eax, &flags);
+ break;
+ case MEMSIZE:
+ // who cares.
+ eax = 64 * 1024;
+ ret = 0;
+ break;
+ case 0x15:
+ ret=handleint21( &edi, &esi, &ebp, &esp,
+ &ebx, &edx, &ecx, &eax, &flags);
+ break;
+ default:
+ printk_info("BIOSINT: Unsupport int #0x%x\n",
+ intnumber);
+ break;
+ }
+ if (ret)
+ flags |= 1; // carry flags
+ else
+ flags &= ~1;
+ stackflags = flags;
+ return ret;
+}
+
+
+void setup_realmode_idt(void)
+{
+ extern unsigned char idthandle, end_idthandle;
+ extern unsigned char debughandle, end_debughandle;
+
+ int i;
+ struct realidt *idts = (struct realidt *) 0;
+ int codesize = &end_idthandle - &idthandle;
+ unsigned char *intbyte, *codeptr;
+
+ // for each int, we create a customized little handler
+ // that just pushes %ax, puts the int # in %al,
+ // then calls the common interrupt handler.
+ // this necessitated because intel didn't know much about
+ // architecture when they did the 8086 (it shows)
+ // (hmm do they know anymore even now :-)
+ // obviously you can see I don't really care about memory
+ // efficiency. If I did I would probe back through the stack
+ // and get it that way. But that's really disgusting.
+ for (i = 0; i < 256; i++) {
+ idts[i].cs = 0;
+ codeptr = (char*) 4096 + i * codesize;
+ idts[i].offset = (unsigned) codeptr;
+ memcpy(codeptr, &idthandle, codesize);
+ intbyte = codeptr + 3;
+ *intbyte = i;
+ }
+
+ // fixed entry points
+
+ // VGA BIOSes tend to hardcode f000:f065 as the previous handler of
+ // int10.
+ // calling convention here is the same as INTs, we can reuse
+ // the int entry code.
+ codeptr = (char*) 0xff065;
+ memcpy(codeptr, &idthandle, codesize);
+ intbyte = codeptr + 3;
+ *intbyte = 0x42; /* int42 is the relocated int10 */
+
+ /* debug handler - useful to set a programmable delay between instructions if the TF bit is set upon
+ call to real mode */
+ idts[1].cs = 0;
+ idts[1].offset = 16384;
+ memcpy(16384, &debughandle, &end_debughandle - &debughandle);
+
+
+}
+
+
+
+enum {
+ CHECK = 0xb001,
+ FINDDEV = 0xb102,
+ READCONFBYTE = 0xb108,
+ READCONFWORD = 0xb109,
+ READCONFDWORD = 0xb10a,
+ WRITECONFBYTE = 0xb10b,
+ WRITECONFWORD = 0xb10c,
+ WRITECONFDWORD = 0xb10d
+};
+
+// errors go in AH. Just set these up so that word assigns
+// will work. KISS.
+enum {
+ PCIBIOS_NODEV = 0x8600,
+ PCIBIOS_BADREG = 0x8700
+};
+
+int
+pcibios(
+ unsigned long *pedi,
+ unsigned long *pesi,
+ unsigned long *pebp,
+ unsigned long *pesp,
+ unsigned long *pebx,
+ unsigned long *pedx,
+ unsigned long *pecx,
+ unsigned long *peax,
+ unsigned long *pflags
+ ) {
+ unsigned long edi = *pedi;
+ unsigned long esi = *pesi;
+ unsigned long ebp = *pebp;
+ unsigned long esp = *pesp;
+ unsigned long ebx = *pebx;
+ unsigned long edx = *pedx;
+ unsigned long ecx = *pecx;
+ unsigned long eax = *peax;
+ unsigned long flags = *pflags;
+ unsigned short func = (unsigned short) eax;
+ int retval = 0;
+ unsigned short devid, vendorid, devfn;
+ short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */
+ unsigned char bus;
+ device_t dev;
+
+ switch(func) {
+ case CHECK:
+ *pedx = 0x4350;
+ *pecx = 0x2049;
+ retval = 0;
+ break;
+ case FINDDEV:
+ {
+ devid = *pecx;
+ vendorid = *pedx;
+ devindex = *pesi;
+ dev = 0;
+ while ((dev = dev_find_device(vendorid, devid, dev))) {
+ if (devindex <= 0)
+ break;
+ devindex--;
+ }
+ if (dev) {
+ unsigned short busdevfn;
+ *peax = 0;
+ // busnum is an unsigned char;
+ // devfn is an int, so we mask it off.
+ busdevfn = (dev->bus->secondary << 8)
+ | (dev->path.u.pci.devfn & 0xff);
+ printk_debug("0x%x: return 0x%x\n", func, busdevfn);
+ *pebx = busdevfn;
+ retval = 0;
+ } else {
+ *peax = PCIBIOS_NODEV;
+ retval = -1;
+ }
+ }
+ break;
+ case READCONFDWORD:
+ case READCONFWORD:
+ case READCONFBYTE:
+ case WRITECONFDWORD:
+ case WRITECONFWORD:
+ case WRITECONFBYTE:
+ {
+ unsigned long dword;
+ unsigned short word;
+ unsigned char byte;
+ unsigned char reg;
+
+ devfn = *pebx & 0xff;
+ bus = *pebx >> 8;
+ reg = *pedi;
+ dev = dev_find_slot(bus, devfn);
+ if (! dev) {
+ printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn);
+ // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn!
+ *peax = PCIBIOS_BADREG;
+ retval = -1;
+ }
+ switch(func) {
+ case READCONFBYTE:
+ byte = pci_read_config8(dev, reg);
+ *pecx = byte;
+ break;
+ case READCONFWORD:
+ word = pci_read_config16(dev, reg);
+ *pecx = word;
+ break;
+ case READCONFDWORD:
+ dword = pci_read_config32(dev, reg);
+ *pecx = dword;
+ break;
+ case WRITECONFBYTE:
+ byte = *pecx;
+ pci_write_config8(dev, reg, byte);
+ break;
+ case WRITECONFWORD:
+ word = *pecx;
+ pci_write_config16(dev, reg, word);
+ break;
+ case WRITECONFDWORD:
+ dword = *pecx;
+ pci_write_config32(dev, reg, dword);
+ break;
+ }
+
+ if (retval)
+ retval = PCIBIOS_BADREG;
+ printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx);
+ *peax = 0;
+ retval = 0;
+ }
+ break;
+ default:
+ printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func);
+ break;
+ }
+
+ return retval;
+}
+
+
+
+int handleint21( unsigned long *edi, unsigned long *esi, unsigned long *ebp,
+ unsigned long *esp, unsigned long *ebx, unsigned long *edx,
+ unsigned long *ecx, unsigned long *eax, unsigned long *flags)
+{
+int res=-1;
+ switch(*eax&0xffff)
+ {
+ case 0x5f19:
+ break;
+ case 0x5f18:
+ *eax=0x5f;
+ *ebx=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory
+ *ecx=0x060;
+ res=0;
+ break;
+ case 0x5f00:
+ *eax = 0x8600;
+ break;
+ case 0x5f01:
+ *eax = 0x5f;
+ *ecx = (*ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768
+ res = 0;
+ break;
+ case 0x5f02:
+ *eax=0x5f;
+ *ebx= (*ebx & 0xffff0000) | 2;
+ *ecx= (*ecx & 0xffff0000) | 0x401; // PAL + crt only
+ *edx= (*edx & 0xffff0000) | 0; // TV Layout - default
+ res=0;
+ break;
+ case 0x5f0f:
+ *eax=0x860f;
+ break;
+ }
+ return res;
+}
diff --git a/src/mainboard/via/epia-m/vgachip.h b/src/mainboard/via/epia-m/vgachip.h
new file mode 100644
index 0000000000..d43788cd66
--- /dev/null
+++ b/src/mainboard/via/epia-m/vgachip.h
@@ -0,0 +1,10 @@
+#ifndef _PC80_VGABIOS
+#define _PC80_VGABIOS
+
+extern struct chip_control pc80_vgabios_control;
+
+struct pc80_vgabios_config {
+ int nothing;
+};
+
+#endif /* _PC80_VGABIOS */
diff --git a/src/northbridge/via/vt8623/northbridge.c b/src/northbridge/via/vt8623/northbridge.c
index bfaaeac30f..7143c358da 100644
--- a/src/northbridge/via/vt8623/northbridge.c
+++ b/src/northbridge/via/vt8623/northbridge.c
@@ -10,6 +10,7 @@
#include <bitops.h>
#include <cpu/cpu.h>
#include <cpu/x86/mtrr.h>
+#include <cpu/x86/msr.h>
#include "chip.h"
#include "northbridge.h"
@@ -19,6 +20,18 @@
* slower than normal, ethernet drops packets).
* Apparently these registers govern some sort of bus master behavior.
*/
+static void dump_dev(device_t dev)
+{
+ int i,j;
+
+ for(i = 0; i < 256; i += 16) {
+ printk_debug("0x%x: ", i);
+ for(j = 0; j < 16; j++) {
+ printk_debug("%02x ", pci_read_config8(dev, i+j));
+ }
+ printk_debug("\n");
+ }
+}
static void northbridge_init(device_t dev)
{
device_t fb_dev;
@@ -44,21 +57,25 @@ static void northbridge_init(device_t dev)
/* Fixup GART and framebuffer addresses properly.
* First setup frame buffer properly.
*/
- fb = pci_read_config32(dev, 0x10); /* Base addres of framebuffer */
+ //fb = pci_read_config32(dev, 0x10); /* Base addres of framebuffer */
+ fb = 0xd0000000;
printk_debug("Frame buffer at %8x\n",fb);
c = pci_read_config8(dev, 0xe1) & 0xf0; /* size of vga */
c |= fb>>28; /* upper nibble of frame buffer address */
+ c = 0xdd;
pci_write_config8(dev, 0xe1, c);
- c = (fb>>20) | 1; /* enable framebuffer */
+ c = 0x81; /* enable framebuffer */
pci_write_config8(dev, 0xe0, c);
pci_write_config8(dev, 0xe2, 0x42); /* 'cos award does */
}
+ //dump_dev(dev);
}
+static void nullfunc(){}
static struct device_operations northbridge_operations = {
- .read_resources = pci_dev_read_resources,
+ .read_resources = nullfunc,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = northbridge_init
@@ -80,10 +97,11 @@ static void agp_init(device_t dev)
pci_write_config8(dev, 0x43, 0x44);
pci_write_config8(dev, 0x44, 0x34);
pci_write_config8(dev, 0x83, 0x02);
+ //dump_dev(dev);
}
static struct device_operations agp_operations = {
- .read_resources = pci_bus_read_resources,
+ .read_resources = nullfunc,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_bus_enable_resources,
.init = agp_init,
@@ -100,12 +118,64 @@ static struct pci_driver agp_driver __pci_driver = {
static void vga_init(device_t dev)
{
// unsigned long fb;
+ msr_t clocks1,clocks2,instructions,setup;
printk_debug("VGA random fixup ...\n");
pci_write_config8(dev, 0x04, 0x07);
pci_write_config8(dev, 0x0d, 0x20);
+ pci_write_config32(dev,0x10,0xd8000008);
+ pci_write_config32(dev,0x14,0xdc000000);
+
+ //dump_dev(dev);
+
+ // set up performnce counters for debugging vga init sequence
+ //setup.lo = 0x1c0; // count instructions
+ //wrmsr(0x187,setup);
+ //instructions.hi = 0;
+ //instructions.lo = 0;
+ //wrmsr(0xc2,instructions);
+ //clocks1 = rdmsr(0x10);
+
+
+#if 0
+ /* code to make vga init go through the emulator - as of yet this does not workfor the epia-m */
+ dev->on_mainboard=1;
+ dev->rom_address = (void *)0xfffc0000;
+
+ pci_dev_init(dev);
+
+ call_bios_interrupt(0x10,0x4f1f,0x8003,1,0);
+
+ //clocks2 = rdmsr(0x10);
+ //instructions = rdmsr(0xc2);
+
+ printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo);
+ printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo);
+ printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo);
+
+#else
+
+ /* code to make vga init run in real mode - does work but against the current Linuxbios philosophy */
+ printk_debug("INSTALL REAL-MODE IDT\n");
+ setup_realmode_idt();
+ printk_debug("DO THE VGA BIOS\n");
+ do_vgabios();
+
+ //clocks2 = rdmsr(0x10);
+ //instructions = rdmsr(0xc2);
- /* Set the vga mtrrs - disable for the moment */
+ //printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo);
+ //printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo);
+ //printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo);
+
+ vga_enable_console();
+
+#endif
+
+
+ pci_write_config32(dev,0x30,0);
+
+ /* Set the vga mtrrs - disable for the moment as the add_var_mtrr function has vapourised */
#if 0
add_var_mtrr( 0xd0000000 >> 10, 0x08000000>>10, MTRR_TYPE_WRCOMB);
fb = pci_read_config32(dev,0x10); // get the fb address
@@ -113,8 +183,17 @@ static void vga_init(device_t dev)
#endif
}
+static void vga_read_resources(device_t dev)
+{
+
+ dev->rom_address = (void *)0xfffc0000;
+ dev->on_mainboard=1;
+ pci_dev_read_resources(dev);
+
+}
+
static struct device_operations vga_operations = {
- .read_resources = pci_dev_read_resources,
+ .read_resources = vga_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = vga_init,
diff --git a/src/northbridge/via/vt8623/raminit.c b/src/northbridge/via/vt8623/raminit.c
index 7371e09e57..750193231a 100644
--- a/src/northbridge/via/vt8623/raminit.c
+++ b/src/northbridge/via/vt8623/raminit.c
@@ -1,91 +1,50 @@
-#include <cpu/x86/mtrr.h>
-#include "raminit.h"
-
-/*
-This software and ancillary information (herein called SOFTWARE )
-called LinuxBIOS is made available under the terms described
-here. The SOFTWARE has been approved for release with associated
-LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has
-been authored by an employee or employees of the University of
-California, operator of the Los Alamos National Laboratory under
-Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The
-U.S. Government has rights to use, reproduce, and distribute this
-SOFTWARE. The public may copy, distribute, prepare derivative works
-and publicly display this SOFTWARE without charge, provided that this
-Notice and any statement of authorship are reproduced on all copies.
-Neither the Government nor the University makes any warranty, express
-or implied, or assumes any liability or responsibility for the use of
-this SOFTWARE. If SOFTWARE is modified to produce derivative works,
-such modified SOFTWARE should be clearly marked, so as not to confuse
-it with the version available from LANL.
- */
-/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL
- * rminnich@lanl.gov
- */
/*
- * 11/26/02 - kevinh@ispiri.com - The existing comments implied that
- * this didn't work yet. Therefore, I've updated it so that it works
- * correctly - at least on my VIA epia motherboard. 64MB DIMM in slot 0.
- */
-
-/* Added automatic detection of first equipped bank and its MA mapping type.
- * (Rest of configuration is done in C)
- * 5/19/03 by SONE Takeshi <ts1@tsn.or.jp>
+ * (C) Copyright 2005 Nick Barker <nick.barker9@btinternet.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
*/
-/* converted to C 9/2003 Ron Minnich */
-
-/* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB
- * frequency is 133MHz. If your CPU runs at another bus speed, you
- * might need to change some of register values.
- */
-#ifndef DIMM_PC133
-#define DIMM_PC133 0
-#endif
-
-// Set to 1 if your DIMMs are CL=2
-#ifndef DIMM_CL2
-#define DIMM_CL2 0
-#endif
+/*
+ Automatically detect and set up ddr dram on the CLE266 chipset.
+ Assumes DDR memory, though chipset also supports SDRAM
+ Assumes at least 266Mhz memory as no attempt is made to clock
+ the chipset down if slower memory is installed.
+ So far tested on:
+ 256 Mb 266Mhz 1 Bank (i.e. single sided)
+ 256 Mb 266Mhz 2 Bank (i.e. double sided)
+ 512 Mb 266Mhz 2 Bank (i.e. double sided)
+*/
+/* ported and enhanced from assembler level code in Linuxbios v1 */
+#include <cpu/x86/mtrr.h>
+#include "raminit.h"
-void dimm_read(unsigned long x)
+void dimm_read(unsigned long bank,unsigned long x)
{
- unsigned long eax;
+ //unsigned long eax;
volatile unsigned long y;
- eax = x;
- y = * (volatile unsigned long *) eax;
-
-}
+ //eax = x;
+ y = * (volatile unsigned long *) (x+ bank) ;
-void dimms_write(int x)
-{
- uint8_t c;
- unsigned long eax = x;
- for(c = 0; c < 6; c++) {
- *(volatile unsigned long *) eax = 0;
- eax += 0x10000000;
- }
}
-
-#ifdef DEBUG_SETNORTHB
-void setnorthb(device_t north, uint8_t reg, uint8_t val)
-{
- print_debug("setnorth: reg ");
- print_debug_hex8(reg);
- print_debug(" to ");
- print_debug_hex8(val);
- print_debug("\r\n");
- pci_write_config8(north, reg, val);
-}
-#else
-#define setnorthb pci_write_config8
-#endif
-
void
dumpnorth(device_t north)
{
@@ -100,246 +59,527 @@ dumpnorth(device_t north)
print_debug("\r\n");
}
}
+void print_val(char *str, int val)
+{
+ print_debug(str);
+ print_debug_hex8(val);
+}
-static void sdram_set_registers(const struct mem_controller *ctrl)
+static void ddr_ram_setup(const struct mem_controller *ctrl)
{
device_t north = (device_t) 0;
- uint8_t c, r;
+ uint8_t b, c, bank;
+ uint16_t i,j;
+ unsigned long bank_address;
print_err("vt8623 init starting\r\n");
north = pci_locate_device(PCI_ID(0x1106, 0x3123), 0);
north = 0;
- print_debug_hex32(north);
- print_debug(" is the north\r\n");
- print_debug_hex16(pci_read_config16(north, 0));
- print_debug(" ");
- print_debug_hex16(pci_read_config16(north, 2));
- print_debug("\r\n");
- /* All we are doing now is setting initial known-good values that will
- * be revised later as we read SPD
- */
pci_write_config8(north,0x75,0x08);
- /* since we only support epia-m at the moment, only ddr is supported */
/* setup cpu */
pci_write_config8(north,0x50,0xc8);
pci_write_config8(north,0x51,0xde);
pci_write_config8(north,0x52,0xcf);
pci_write_config8(north,0x53,0x88);
- pci_write_config8(north,0x55,0x07);
+ pci_write_config8(north,0x55,0x04);
- /* DRAM MA Map Type */
- pci_write_config8(north,0x58,0xe0);
+/*
+ DRAM MA Map Type Device 0 Offset 58
- /* DRAM bank 0 - 3 size = 512M */
- pci_write_config8(north,0x5a,0x10);
- pci_write_config8(north,0x5b,0x10);
- pci_write_config8(north,0x5c,0x10);
- pci_write_config8(north,0x5d,0x10);
+ Determine memory addressing based on the module's memory technology and
+ arrangement. See Table 4-9 of Intel's 82443GX datasheet for details.
- /* set DRAM timing for all banks */
- pci_write_config8(north,0x64,0xe6);
+ Bank 1/0 MA map type 58[7-5]
+ Bank 1/0 command rate 58[4]
+ Bank 3/2 MA map type 58[3-1]
+ Bank 3/2 command rate 58[0]
- /* set DRAM type to DDR */
- pci_write_config8(north,0x60,0x02);
+ Read SPD byte 17, Number of banks on SDRAM device.
+*/
+ c = 0;
+ b = smbus_read_byte(0xa0,17);
+ print_val("Detecting Memory\r\nNumber of Banks ",b);
- /* DRAM arbitration timer */
- pci_write_config8(north,0x65,0x32);
- pci_write_config8(north,0x66,0x01);
- pci_write_config8(north,0x68,0x59);
+ if( b != 2 ){ // not 16 Mb type
+
+/*
+ Read SPD byte 3, Number of row addresses.
+*/
+ b = smbus_read_byte(0xa0,3);
+ print_val("\r\nNumber of Rows ",b);
+ if( b >= 0x0d ){ // not 64/128Mb (rows <=12)
+/*
+ Read SPD byte 13, Primary DRAM width.
+*/
+ b = smbus_read_byte(0xa0,13);
+ print_val("\r\nPriamry DRAM width",b);
+ if( b != 4 ) // mot 64/128Mb (x4)
+ c = 0x80; // 256Mb
+ }
- /* DRAM Frequency */
- pci_write_config8(north,0x54,0xe0);
- pci_write_config8(north,0x69,0x2d);
+/*
+ 64/128Mb chip
- /* Enable CKE */
- pci_write_config8(north,0x6b,0x10);
+ Read SPD byte 4, Number of column addresses.
+*/
+ b = smbus_read_byte(0xa0,4);
+ print_val("\r\nNo Columns ",b);
+ if( b == 10 || b == 11 ) c |= 0x60; // 10/11 bit col addr
+ if( b == 9 ) c |= 0x40; // 9 bit col addr
+ if( b == 8 ) c |= 0x20; // 8 bit col addr
+
+ }
+ print_val("\r\nMA type ",c);
+ pci_write_config8(north,0x58,c);
+
+/*
+ DRAM bank size. See 4.3.1 pg 35
+
+ 5a->5d set to end address for each bank. 1 bit == 16MB
+ 5a = bank 0
+ 5b = bank 0 + b1
+ 5c = bank 0 + b1 + b2
+ 5d = bank 0 + b1 + b2 + b3
+*/
+
+// Read SPD byte 31 Module bank density
+ c = 0;
+ b = smbus_read_byte(0xa0,31);
+ if( b & 0x02 ) c = 0x80; // 2GB
+ else if( b & 0x01) c = 0x40; // 1GB
+ else if( b & 0x80) c = 0x20; // 512Mb
+ else if( b & 0x40) c = 0x10; // 256Mb
+ else if( b & 0x20) c = 0x08; // 128Mb
+ else if( b & 0x10) c = 0x04; // 64Mb
+ else if( b & 0x08) c = 0x02; // 32Mb
+ else if( b & 0x04) c = 0x01; // 16Mb / 4Gb
+ else c = 0x01; // Error, use default
+
+
+ print_val("\r\nBank 0 (*16 Mb) ",c);
+
+ // set bank zero size
+ pci_write_config8(north,0x5a,c);
+ // SPD byte 5 # of physical banks
+ b = smbus_read_byte(0xa0,5);
+
+ print_val("\r\nNo Physical Banks ",b);
+ if( b == 2)
+ c <<=1;
+
+ print_val("\r\nTotal Memory (*16 Mb) ",c);
+ // set banks 1,2,3
+ pci_write_config8(north,0x5b,c);
+ pci_write_config8(north,0x5c,c);
+ pci_write_config8(north,0x5d,c);
+
+
+ /* Read SPD byte 18 CAS Latency */
+ b = smbus_read_byte(0xa0,18);
+ print_debug("\r\nCAS Supported ");
+ if(b & 0x04)
+ print_debug("2 ");
+ if(b & 0x08)
+ print_debug("2.5 ");
+ if(b & 0x10)
+ print_debug("3");
+ print_val("\r\nCycle time at CL X (nS)",smbus_read_byte(0xa0,9));
+ print_val("\r\nCycle time at CL X-0.5 (nS)",smbus_read_byte(0xa0,23));
+ print_val("\r\nCycle time at CL X-1 (nS)",smbus_read_byte(0xa0,25));
- /* Disable DRAM refresh */
- pci_write_config8(north,0x6a,0x0);
- /* set heavy drive */
- pci_write_config8(north,0x6d,0x44);
+ if( b & 0x10 ){ // DDR offering optional CAS 3
+ print_debug("\r\nStarting at CAS 3");
+ c = 0x30;
+ /* see if we can better it */
+ if( b & 0x08 ){ // DDR mandatory CAS 2.5
+ if( smbus_read_byte(0xa0,23) <= 0x75 ){ // we can manage 133Mhz at CAS 2.5
+ print_debug("\r\nWe can do CAS 2.5");
+ c = 0x20;
+ }
+ }
+ if( b & 0x04 ){ // DDR mandatory CAS 2
+ if( smbus_read_byte(0xa0,25) <= 0x75 ){ // we can manage 133Mhz at CAS 2
+ print_debug("\r\nWe can do CAS 2");
+ c = 0x10;
+ }
+ }
+ }else{ // no optional CAS values just 2 & 2.5
+ print_debug("\r\nStarting at CAS 2.5");
+ c = 0x20; // assume CAS 2.5
+ if( b & 0x04){ // Should always happen
+ if( smbus_read_byte(0xa0,23) <= 0x75){ // we can manage 133Mhz at CAS 2
+ print_debug("\r\nWe can do CAS 2");
+ c = 0x10;
+ }
+ }
+ }
- pci_write_config8(north,0x61,0xff);
+/*
+ DRAM Timing Device 0 Offset 64
+ Row pre-charge 64[7]
+ RAS Pulse width 64[6]
+ CAS Latency 64[5,4]
-}
+ SDR DDR
+ 00 1T -
+ 01 2T 2T
+ 10 3T 2.5T
+ 11 - 3T
-/* slot is the dram slot. Return size of side0 in lower 16-bit,
- * side1 in upper 16-bit, in units of 8MB */
-static unsigned long
-spd_module_size(unsigned char slot)
-{
- /* for all the DRAMS, see if they are there and get the size of each
- * module. This is just a very early first cut at sizing.
- */
- /* we may run out of registers ... */
- unsigned int banks, rows, cols, reg;
- unsigned int value = 0;
- unsigned int module = ((0x50 + slot) << 1) + 1;
- /* is the module there? if byte 2 is not 4, then we'll assume it
- * is useless.
- */
- print_info("Slot ");
- print_info_hex8(slot);
- if (smbus_read_byte(module, 2) != 4) {
- print_info(" is empty\r\n");
- return 0;
- }
- print_info(" is SDRAM ");
-
- banks = smbus_read_byte(module, 17);
- /* we're going to assume symmetric banks. Sorry. */
- cols = smbus_read_byte(module, 4) & 0xf;
- rows = smbus_read_byte(module, 3) & 0xf;
- /* grand total. You have rows+cols addressing, * times of banks, times
- * width of data in bytes */
- /* Width is assumed to be 64 bits == 8 bytes */
- value = (1 << (cols + rows)) * banks * 8;
- print_info_hex32(value);
- print_info(" bytes ");
- /* Return in 8MB units */
- value >>= 23;
-
- /* We should have single or double side */
- if (smbus_read_byte(module, 5) == 2) {
- print_info("x2");
- value = (value << 16) | value;
- }
- print_info("\r\n");
- return value;
+ RAS/CAS delay 64[2]
+ Bank Interleave 64[1,0]
-}
-static int
-spd_num_chips(unsigned char slot)
-{
- unsigned int module = ((0x50 + slot) << 1) + 1;
- unsigned int width;
+ Determine row pre-charge time (tRP)
- width = smbus_read_byte(module, 13);
- if (width == 0)
- width = 8;
- return 64 / width;
-}
+ T nS SPD*4 SPD
+ 1T 7.5 0x1e
+ 2T 15 0x3c
+ 3T 22.5 0x5a
+ 4T 30 0x1e
+ 5T 37.5 0x25 .5?
+ 6T 45 0x2d
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
-{
-#define T133 7
- unsigned char Trp = 1, Tras = 1, casl = 2, val;
- unsigned char timing = 0xe4;
- /* read Trp */
- val = smbus_read_byte(0xa0, 27);
- if (val < 2*T133)
- Trp = 1;
- val = smbus_read_byte(0xa0, 30);
- if (val < 5*T133)
- Tras = 0;
- val = smbus_read_byte(0xa0, 18);
- if (val < 8)
- casl = 1;
- if (val < 4)
- casl = 0;
-
- val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
-
- print_debug_hex8(val); print_debug(" is the computed timing\r\n");
- /* don't set it. Experience shows that this screwy chipset should just
- * be run with the most conservative timing.
- * pci_write_config8(0, 0x64, val);
- */
-}
-static void set_ma_mapping(device_t north, int slot, int type)
-{
- unsigned char reg, val;
- int shift;
-
- reg = 0x58 + slot/2;
- if (slot%2 >= 1)
- shift = 0;
- else
- shift = 4;
-
- val = pci_read_config8(north, reg);
- val &= ~(0xf << shift);
- val |= type << shift;
- pci_write_config8(north, reg, val);
-}
+ Read SPD byte 27, min row pre-charge time.
+*/
+ b = smbus_read_byte(0xa0,27);
+ print_val("\r\ntRP ",b);
+ if( b > 0x3c ) // set tRP = 3T
+ c |= 0x80;
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
-{
- unsigned char i;
- static const uint8_t ramregs[] = {
- 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
- };
- device_t north = 0;
- uint32_t size, base, slot, ma;
-
- /* NOP command enable */
- pci_write_config8(north,0x6b,0x01);
+/*
+ Determine RAS to CAS delay (tRCD)
+
+ Read SPD byte 29, min row pre-charge time.
+*/
+
+ b = smbus_read_byte(0xa0,29);
+ print_val("\r\ntRCD ",b);
+ if( b > 0x3c ) // set tRCD = 3T
+ c |= 0x04;
+
+/*
+ Determine RAS pulse width (tRAS)
+
+
+ Read SPD byte 30, device min active to pre-charge time.
+*/
+
+ b = smbus_read_byte(0xa0,30);
+ print_val("\r\ntRAS ",b);
+ if( b > 0x25 ) // set tRAS = 6T
+ c |= 0x40;
+
+
+/*
+ Determine bank interleave
+
+ Read SPD byte 17, Number of banks on SDRAM device.
+*/
+ b = smbus_read_byte(0xa0,17);
+ if( b == 4) c |= 0x02;
+ else if (b == 2) c |= 0x01;
+
+
+ /* set DRAM timing for all banks */
+ pci_write_config8(north,0x64,c);
+
+ /* set DRAM type to DDR */
+ pci_write_config8(north,0x60,0x02);
+
+
+ /* DRAM arbitration timer */
+ pci_write_config8(north,0x65,0x32);
+
+
+/*
+ CPU Frequency Device 0 Offset 54
+
+ CPU Frequency 54[7,6] bootstraps at 0xc0 (133Mhz)
+ DRAM burst length = 8 54[5]
+*/
+ pci_write_config8(north,0x54,0xe0);
+
- /* read a double word from any addree of the dimm */
- dimm_read(0x1f000);
+/*
+ DRAM Clock Device 0 Offset 69
+
+ DRAM/CPU speed 69[7,6] (leave at default 00 == CPU)
+ Controller que > 2 69[5]
+ Controller que != 4 69[4]
+ DRAM 8k page size 69[3]
+ DRAM 4k page size 69[2]
+ Multiple page mode 69[0]
+*/
+
+ pci_write_config8(north,0x69,0x2d);
+
+ /* Delay >= 100ns after DRAM Frequency adjust, See 4.1.1.3 pg 15 */
+ udelay(200);
+
+
+ /* Enable CKE */
+ pci_write_config8(north,0x6b,0x10);
udelay(200);
- /* All bank precharge Command Enable */
- pci_write_config8(north,0x6b,0x02);
- dimm_read(0x1f000);
+ /* Disable DRAM refresh */
+ pci_write_config8(north,0x6a,0x0);
+
+
+ /* Set drive for 1 bank DDR (Table 4.4.2, pg 40) */
+ pci_write_config8(north,0x6d,0x044);
+ pci_write_config8(north,0x67,0x3a);
+
+ b = smbus_read_byte(0xa0,5); // SPD byte 5 # of physical banks
+ if( b > 1) {
+ // Increase drive control when there is more than 1 physical bank
+ pci_write_config8(north,0x6c,0x84); // Drive control: MA, DQS, MD/CKE
+ pci_write_config8(north,0x6d,0x55); // DC: Early clock select, DQM, CS#, MD
+ }
+ /* place frame buffer on last bank */
+ if( !b) b++; // make sure at least 1 bank reported
+ pci_write_config8(north,0xe3,b-1);
+
+ for( bank = 0 , bank_address=0; bank < b ; bank++){
+/*
+ DDR init described in Via BIOS Porting Guide. Pg 28 (4.2.3.1)
+*/
+
+
+ /* NOP command enable */
+ pci_write_config8(north,0x6b,0x11);
+
+ /* read a double word from any address of the dimm */
+ dimm_read(bank_address,0x1f000);
+ //udelay(200);
+
+ /* All bank precharge Command Enable */
+ pci_write_config8(north,0x6b,0x12);
+ dimm_read(bank_address,0x1f000);
+
+
+ /* MSR Enable */
+ pci_write_config8(north,0x6b,0x13);
+ dimm_read(bank_address,0x2000);
+ udelay(1);
+ dimm_read(bank_address,0x800);
+ udelay(1);
+
+ /* All banks precharge Command Enable */
+ pci_write_config8(north,0x6b,0x12);
+ dimm_read(bank_address,0x1f200);
+
+ /* CBR Cycle Enable */
+ pci_write_config8(north,0x6b,0x14);
+
+ /* Read 8 times */
+ dimm_read(bank_address,0x1f300);
+ udelay(100);
+ dimm_read(bank_address,0x1f400);
+ udelay(100);
+ dimm_read(bank_address,0x1f500);
+ udelay(100);
+ dimm_read(bank_address,0x1f600);
+ udelay(100);
+ dimm_read(bank_address,0x1f700);
+ udelay(100);
+ dimm_read(bank_address,0x1f800);
+ udelay(100);
+ dimm_read(bank_address,0x1f900);
+ udelay(100);
+ dimm_read(bank_address,0x1fa00);
+ udelay(100);
+
+ /* MSR Enable */
+ pci_write_config8(north,0x6b,0x13);
+
+/*
+ Mode Register Definition
+ with adjustement so that address calculation is correct - 64 bit technology, therefore
+ a0-a2 refer to byte within a 64 bit long word, and a3 is the first address line presented
+ to DIMM as a row or column address.
+
+ MR[9-7] CAS Latency
+ MR[6] Burst Type 0 = sequential, 1 = interleaved
+ MR[5-3] burst length 001 = 2, 010 = 4, 011 = 8, others reserved
+ MR[0-2] dont care
+
+ CAS Latency
+ 000 reserved
+ 001 reserved
+ 010 2
+ 011 3
+ 100 reserved
+ 101 1.5
+ 110 2.5
+ 111 reserved
+
+ CAS 2 0101011000 = 0x158
+ CAS 2.5 1101011000 = 0x358
+ CAS 3 0111011000 = 0x1d8
+
+*/
+ c = pci_read_config8(north,0x64);
+ if( (c & 0x30) == 0x10 )
+ dimm_read(bank_address,0x150);
+ else if((c & 0x30) == 0x20 )
+ dimm_read(bank_address,0x350);
+ else
+ dimm_read(bank_address,0x1d0);
+
+ //dimm_read(bank_address,0x350);
+
+ /* Normal SDRAM Mode */
+ pci_write_config8(north,0x6b,0x58 );
+
+
+ bank_address = pci_read_config8(north,0x5a+bank) * 0x1000000;
+ } // end of for each bank
+
+ /* Adjust DQS (data strobe output delay). See 4.2.3.2 pg 29 */
+ pci_write_config8(north,0x66,0x41);
+
+ /* determine low bond */
+ if( b == 2)
+ bank_address = pci_read_config8(north,0x5a) * 0x1000000;
+ else
+ bank_address = 0;
+
+ for(i = 0 ; i < 0x0ff; i++){
+ c = i ^ (i>>1); // convert to gray code
+ pci_write_config8(north,0x68,c);
+ // clear
+ *(volatile unsigned long*)(0x4000) = 0;
+ *(volatile unsigned long*)(0x4100+bank_address) = 0;
+ *(volatile unsigned long*)(0x4200) = 0;
+ *(volatile unsigned long*)(0x4300+bank_address) = 0;
+ *(volatile unsigned long*)(0x4400) = 0;
+ *(volatile unsigned long*)(0x4500+bank_address) = 0;
+
+
+ // fill
+ *(volatile unsigned long*)(0x4000) = 0x12345678;
+ *(volatile unsigned long*)(0x4100+bank_address) = 0x81234567;
+ *(volatile unsigned long*)(0x4200) = 0x78123456;
+ *(volatile unsigned long*)(0x4300+bank_address) = 0x67812345;
+ *(volatile unsigned long*)(0x4400) = 0x56781234;
+ *(volatile unsigned long*)(0x4500+bank_address) = 0x45678123;
+
+ // verify
+ if( *(volatile unsigned long*)(0x4000) != 0x12345678)
+ continue;
+
+ if( *(volatile unsigned long*)(0x4100+bank_address) != 0x81234567)
+ continue;
+
+ if( *(volatile unsigned long*)(0x4200) != 0x78123456)
+ continue;
+
+ if( *(volatile unsigned long*)(0x4300+bank_address) != 0x67812345)
+ continue;
+
+ if( *(volatile unsigned long*)(0x4400) != 0x56781234)
+ continue;
+
+ if( *(volatile unsigned long*)(0x4500+bank_address) != 0x45678123)
+ continue;
+
+ // if everything verified then found low bond
+ break;
+
+ }
+ print_val("\r\nLow Bond ",i);
+ if( i < 0xff ){
+ c = i++;
+ for( ; i <0xff ; i++){
+ pci_write_config8(north,0x68,i ^ (i>>1) );
+
+ // clear
+ *(volatile unsigned long*)(0x8000) = 0;
+ *(volatile unsigned long*)(0x8100+bank_address) = 0;
+ *(volatile unsigned long*)(0x8200) = 0x0;
+ *(volatile unsigned long*)(0x8300+bank_address) = 0;
+ *(volatile unsigned long*)(0x8400) = 0x0;
+ *(volatile unsigned long*)(0x8500+bank_address) = 0;
+
+ // fill
+ *(volatile unsigned long*)(0x8000) = 0x12345678;
+ *(volatile unsigned long*)(0x8100+bank_address) = 0x81234567;
+ *(volatile unsigned long*)(0x8200) = 0x78123456;
+ *(volatile unsigned long*)(0x8300+bank_address) = 0x67812345;
+ *(volatile unsigned long*)(0x8400) = 0x56781234;
+ *(volatile unsigned long*)(0x8500+bank_address) = 0x45678123;
+
+ // verify
+ if( *(volatile unsigned long*)(0x8000) != 0x12345678)
+ break;
+
+ if( *(volatile unsigned long*)(0x8100+bank_address) != 0x81234567)
+ break;
+
+ if( *(volatile unsigned long*)(0x8200) != 0x78123456)
+ break;
+
+ if( *(volatile unsigned long*)(0x8300+bank_address) != 0x67812345)
+ break;
+
+ if( *(volatile unsigned long*)(0x8400) != 0x56781234)
+ break;
+
+ if( *(volatile unsigned long*)(0x8500+bank_address) != 0x45678123)
+ break;
+
+ }
+ print_val(" High Bond",i);
+ c = ((i - c)<<1)/3 +c;
+ print_val(" Setting DQS delay",c);
+ c = c ^ (c>>1); // convert to gray code
+ pci_write_config8(north,0x68,c);
+ pci_write_config8(north,0x68,0x42);
+ }else{
+ print_debug("Unable to determine low bond - Setting default\r\n");
+ pci_write_config8(north,0x68,0x59);
+ }
- /* MSR Enable */
- pci_write_config8(north,0x6b,0x03);
- dimm_read(0x2000);
- dimm_read(0x800);
+ pci_write_config8(north,0x66,0x01);
+ pci_write_config8(north,0x55,0x07);
- /* All banks precharge Command Enable */
- pci_write_config8(north,0x6b,0x02);
- dimm_read(0x1f200);
- /* CBR Cycle Enable */
- pci_write_config8(north,0x6b,0x04);
- /* Read 8 times */
- dimm_read(0x1f300);
- udelay(100);
- dimm_read(0x1f400);
- udelay(100);
- dimm_read(0x1f500);
- udelay(100);
- dimm_read(0x1f600);
- udelay(100);
- dimm_read(0x1f700);
- udelay(100);
- dimm_read(0x1f800);
- udelay(100);
- dimm_read(0x1f900);
- udelay(100);
- dimm_read(0x1fa00);
- udelay(100);
+/*
+ DRAM refresh rate Device 0 Offset 6a
- /* MSR Enable */
- pci_write_config8(north,0x6b,0x03);
+ Units of 16 DRAM clock cycles. (See 4.4.1 pg 39)
- /* 0x150 if CAS Latency 2 or 0x350 CAS Latency 2.5 */
- dimm_read(0x350);
+ Rx69 (DRAM freq) Rx58 (chip tech) Rx6a
- /* Normal SDRAM Mode */
- pci_write_config8(north,0x6b,0x58 );
+ 133Mhz 64/128Mb 0x86
+ 133Mhz 256/512Mb 0x43
+ 100Mhz 64/128Mb 0x65
+ 100Mhz 256/512Mb 0x32
+*/
+ b = pci_read_config8(north,0x58);
+ if( b < 0x80 ) // 256 tech
+ pci_write_config8(north,0x6a,0x86);
+ else
+ pci_write_config8(north,0x6a,0x43);
- /* Set the refresh rate */
- pci_write_config8(north,0x6a,0x43);
- pci_write_config8(north,0x67,0x22);
+ pci_write_config8(north,0x61,0xff);
+ //pci_write_config8(north,0x67,0x22);
/* pci */
pci_write_config8(north,0x70,0x82);
@@ -351,14 +591,18 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* graphics aperture base */
+
pci_write_config8(north,0x13,0xd0);
- //pci_write_config8(north,0x56,0x10);
- //pci_write_config8(north,0x57,0x10);
+ //pci_write_config8(north,0xe1,0xdf);
+ //pci_write_config8(north,0xe2,0x42);
+ pci_write_config8(north,0xe0,0x00);
+
+ pci_write_config8(north,0x84,0x80);
+ pci_write_config16(north,0x80,0x610f);
+ pci_write_config32(north,0x88,0x00000002);
+
- pci_write_config8(north,0xe0,0x80);
- pci_write_config8(north,0xe1,0xdf);
- pci_write_config8(north,0xe2,0x42);
pci_write_config8(north,0xa8,0x04);
pci_write_config8(north,0xac,0x2f);
@@ -366,4 +610,18 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
print_err("vt8623 done\r\n");
dumpnorth(north);
+
+ print_err("AGP\r\n");
+ north = pci_locate_device(PCI_ID(0x1106, 0xb091), 0);
+ pci_write_config32(north,0x20,0xddf0dc00);
+ pci_write_config32(north,0x24,0xdbf0d800);
+ pci_write_config8(north,0x3e,0x0c);
+ //dumpnorth(north);
+
+ //print_err("VGA\n");
+ //north = pci_locate_device(PCI_ID(0x1106, 0x3122), 0);
+ //pci_write_config32(north,0x10,0xd8000008);
+ //pci_write_config32(north,0x14,0xdc000000);
+ //dumpnorth(north);
+
}
diff --git a/src/southbridge/ricoh/rl5c476/chip.h b/src/southbridge/ricoh/rl5c476/chip.h
index 5d7a2e3ab6..c4cd9d7997 100644
--- a/src/southbridge/ricoh/rl5c476/chip.h
+++ b/src/southbridge/ricoh/rl5c476/chip.h
@@ -1,10 +1,11 @@
#ifndef _SOUTHBRIDGE_RICOH_RL5C476
#define _SOUTHBRIDGE_RICOH_RL5C476
-extern struct chip_operations southbridge_ricoh_rl5c476_control;
+extern struct chip_operations southbridge_ricoh_rl5c476_ops;
struct southbridge_ricoh_rl5c476_config {
- int num;
+ int enable_cf;
+
};
#endif /* _SOUTHBRIDGE_RL5C476 */
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c
index ede34b61f5..8495c3f941 100644
--- a/src/southbridge/ricoh/rl5c476/rl5c476.c
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.c
@@ -14,10 +14,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
-
+/* (C) Copyright 2005 Nick Barker <nick.barker@btinternet.com
+ brought into line with the current architecture of LinuxBios */
#include <arch/io.h>
@@ -26,194 +27,174 @@
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
+#include <device/cardbus.h>
#include "rl5c476.h"
#include "chip.h"
+static int enable_cf_boot = 0;
+static unsigned int cf_base;
+
static void udelay(int i){
for(; i > 0 ; i--)
inb(0x80);
}
-static void
-dump_south(void)
-{
- device_t dev0;
- dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0);
- dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev0);
- int i,j;
-
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", pci_read_config8(dev0, i+j));
- }
- printk_debug("\n");
- }
- printk_debug("Card32\n");
- for(i = 0 ; i < 256 ; i+=16){
- printk_debug("0x%x: ",i);
- for(j = 0 ; j < 16 ; j++){
- printk_debug(" %02x",*(unsigned char *)(0x80000000+i+j));
- }
- printk_debug("\n");
- }
- printk_debug("Card16\n");
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", *(unsigned char *)(0x80000800+ i+j));
- }
- printk_debug("\n");
- }
- printk_debug("CF Config\n");
- for(i = 0 ; i < 256 ; i+=16){
- printk_debug("0x%x: ",i);
- for(j=0 ; j < 16 ; j++){
- printk_debug("%02x ",*(unsigned char *)(0x81000200 + i + j));
- }
- printk_debug("\n");
- }
-}
-
-
static void rl5c476_init(device_t dev)
{
//unsigned char enables;
pc16reg_t *pc16;
- int i;
-#error "FIXME implement carbus bridge support"
-#error "FIXME this code is close to a but the conversion needs more work"
+ unsigned char *base;
+
/* cardbus controller function 1 for CF Socket */
printk_debug("rl5c476 init\n");
- /* setup pci header manually because 'pci_device.c' doesn't know how to handle
- * pci to cardbus bridges - (header type 2 I think)
- */
+ printk_debug("CF Base = %0x\n",cf_base);
+ /* misc control register */
+ pci_write_config16(dev,0x82,0x00a0);
- /* initialize function zero - pcmcia socket so it behaves itself */
- /* FIXME - statically put control memory at 0xe0000000 for now
- * one day the pci_device allocator might do this */
- pci_write_config32(dev,0x10,0xe0000000);
- pci_write_config8(dev,0x0d,0x20);
- pci_write_config8(dev,0x19,0x02);
- pci_write_config8(dev,0x1a,0x02);
- pci_write_config8(dev,0x1b,0x20);
- //pci_write_config8(dev,0x3c,0);
- pci_write_config8(dev,0x82,0x00a0);
- pci_write_config16(dev,0x04,0x07);
+ /* set up second slot as compact flash port if asked to do so */
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
-
- /* get second function - i.e. compact flash socket */
- dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev);
+ /* make sure isa interrupts are enabled */
+ pci_write_config16(dev,0x3e,0x0780);
+ /* pick up where 16 bit card control structure is (0x800 bytes into config structure) */
+ base = (unsigned char *)pci_read_config32(dev,0x10);
+ pc16 = (pc16reg_t *)(base + 0x800);
- /* FIXME - control structure statically declared at 0xe0008000 for now */
- pci_write_config32(dev,0x10,0xe0008000);
- pci_write_config8(dev,0x0d,0x20);
- pci_write_config8(dev,0x19,0x03);
- pci_write_config8(dev,0x1a,0x03);
- pci_write_config8(dev,0x1b,0x20);
+ /* disable memory and io windows and turn off socket power */
+ pc16->pwctrl = 0;
- //pci_write_config8(dev,0x3c,0x0);
- pci_write_config16(dev,0x3e,0x0780);
- pci_write_config16(dev,0x82,0x00a0);
+ /* disable irq lines */
+ pc16->igctrl = 0;
- pci_write_config16(dev,0x04,0x07);
+ /* disable memory and I/O windows */
+ pc16->awinen = 0;
+ /* reset card, configure for I/O and set IRQ line */
+ pc16->igctrl = 0x69;
- /* pick up where 16 bit card control structure is */
- pc16 = (pc16reg_t *)(0xe0008800);
+ // set io window 0 for 1e0 - 1ef
+ /* note this now sets CF up on a contiguous I/O window of 16 bytes, 0x1e0 to 0x1ef
+ Be warned that this is not a standard IDE address as automatically detected by the likes
+ of Filo, and would need patching to recognise these addresses as an IDE drive */
+ /* an earlier version of this driver set up 2 io windows to emulate the expected addresses
+ for IDE2, however the pcmcia package within Linux then could not re-initiailse the
+ device as it tried to take control of it. So I belive it is easier to patch Filo or the like
+ to pick up this drive rather than playing silly games as the kernel tries to boot.
+ */
+ pc16->iostl0 = 0xe0;
+ pc16->iosth0 = 1;
- /* disable memory and io windows and turn off socket power */
- pc16->pwctrl = 0;
+ pc16->iospl0 = 0xef;
+ pc16->iosph0 = 1;
- /* disable irq lines */
- pc16->igctrl = 0;
+ pc16->ioffl0 = 0;
+ pc16->ioffh0 = 0;
- /* disable memory and I/O windows */
- pc16->awinen = 0;
+ // clear window 1
+ pc16->iostl1 = 0;
+ pc16->iosth1 = 0;
- /* reset card, configure for I/O and set IRQ line */
- pc16->igctrl = 0x69;
+ pc16->iospl1 = 0;
+ pc16->iosph1 = 0;
+ pc16->ioffl1 = 0x0;
+ pc16->ioffh1 = 0;
- // set io window 0 for 1e8 - 1ef
- pc16->iostl0 = 0xe8;
- pc16->iosth0 = 1;
- pc16->iospl0 = 0xef;
- pc16->iosph0 = 1;
- // add io offset of 8 so that CF card will decode 0x1e8 as 0x1f0 i.e. the first byte of
- // a 16 byte aligned, 16 byte window etc
- pc16->ioffl0 = 0x8;
- pc16->ioffh0 = 0;
+ // set up CF config window
+ pc16->smpga0 = cf_base>>24;
+ pc16->smsth0 = (cf_base>>20)&0x0f;
+ pc16->smstl0 = (cf_base>>12)&0xff;
+ pc16->smsph0 = ((cf_base>>20)&0x0f) | 0x80;
+ pc16->smspl0 = (cf_base>>12)&0xff;
+ pc16->moffl0 = 0;
+ pc16->moffh0 = 0x40;
- // set io window 1 for 3ed - 3ee
- pc16->iostl1 = 0xed;
- pc16->iosth1 = 3;
- pc16->iospl1 = 0xee;
- pc16->iosph1 = 3;
+ // set I/O width for Auto Data width
+ pc16->ioctrl = 0x22;
- pc16->ioffl1 = 0x0;
- pc16->ioffh1 = 0;
+ // enable I/O window 0 and 1
+ pc16->awinen = 0xc1;
- // FIXME statically declare CF config window at 0xe1000000
- pc16->smstl0 = 0;
- pc16->smsth0 = 0;
- pc16->smspl0 = 0;
- pc16->smsph0 = 0x80;
- pc16->moffl0 = 0;
- pc16->moffh0 = 0x40;
- pc16->smpga0 = 0xe1;
- // set I/O width for Auto Data width
- pc16->ioctrl = 0x22;
+ pc16->miscc1 = 1;
+ // apply power and enable outputs
+ pc16->pwctrl = 0xb0;
+
- // enable I/O window 0 and 1
- pc16->awinen = 0xc1;
+ // delay could be optimised, but this works
+ udelay(100000);
+
+ pc16->igctrl = 0x69;
- pc16->miscc1 = 1;
+ // 16 bit CF always have first config byte at 0x200 into Config structure,
+ // but CF+ May Not according to spec - should locate through reading tuple data,
+ // but this will do for now !!!
+ unsigned char *cptr;
+ cptr = (unsigned char *)(cf_base + 0x200);
+ printk_debug("CF Config = %x\n",*cptr);
- // apply power and enable outputs
- pc16->pwctrl = 0xb0;
-
+ // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io
+ // windows of the bridge set up above to map those bytes into the
+ // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee)
+ *cptr = 0x41;
+ }
- // delay could be optimised, but this works
- udelay(100000);
-
- pc16->igctrl = 0x69;
+}
- unsigned char *cptr;
- cptr = (unsigned char *)(0xe1000200);
- printk_debug("CF Config = %x\n",*cptr);
+void rl5c476_read_resources(device_t dev)
+{
- // FIX Me 16 bit CF always have first config byte at 0x200 into Config structure,
- // but CF+ May Not according to spec - should locate through reading tuple data,
- // but this will do for now !!!
+ struct resource *resource;
+ /* for cf socket we need an extra memory window for the control structure of the cf itself */
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
+ resource = new_resource(dev,1); /* fake index as it isn't in pci config space */
+ resource->flags |= IORESOURCE_MEM ;
+ resource->size = 0x1000;
+ resource->align = resource->gran = 12;
+ resource->limit= 0xffff0000;
+ //compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags);
+ }
+ cardbus_read_resources(dev);
- // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io
- // windows of the bridge set up above to map those bytes into the
- // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee)
- *cptr = 0x41;
+}
+void rl5c476_set_resources(device_t dev)
+{
+
+ struct resource *resource;
+ printk_debug("%s In set resources \n",dev_path(dev));
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
+ resource = find_resource(dev,1);
+ if( !(resource->flags & IORESOURCE_STORED) ){
+ resource->flags |= IORESOURCE_STORED ;
+ compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags);
+ printk_debug("%s 1 ==> %x\n",dev_path(dev),resource->base);
+ cf_base = resource->base;
+ }
+ }
+
+ pci_dev_set_resources(dev);
}
static struct device_operations ricoh_rl5c476_ops = {
- .read_resources = pci_bus_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_bus_enable_resources,
- .inti = rl5c476_init,
- .scan_bus = pci_scan_bridge,
+ .read_resources = rl5c476_read_resources,
+ .set_resources = rl5c476_set_resources,
+ .enable_resources = cardbus_enable_resources,
+ .init = rl5c476_init,
+ .scan_bus = cardbus_scan_bridge,
};
static struct pci_driver ricoh_rl5c476_driver __pci_driver = {
@@ -222,7 +203,15 @@ static struct pci_driver ricoh_rl5c476_driver __pci_driver = {
.device = PCI_DEVICE_ID_RICOH_RL5C476,
};
-struct chip_operations southbridge_ricoh_rl5c476_control = {
+void southbridge_init(device_t dev)
+{
+
+ struct southbridge_ricoh_rl5c476_config *conf = dev->chip_info;
+ enable_cf_boot = conf->enable_cf;
+
+}
+
+struct chip_operations southbridge_ricoh_rl5c476_ops = {
CHIP_NAME("RICOH RL5C476")
- .enable = southbridge_init,
+ .enable_dev = southbridge_init,
};
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.h b/src/southbridge/ricoh/rl5c476/rl5c476.h
index 0ded3d5aa9..c2da0de17f 100644
--- a/src/southbridge/ricoh/rl5c476/rl5c476.h
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.h
@@ -14,8 +14,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
/* rl5c476 routines and defines*/
diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c
index ea649a418c..e6287ece9c 100644
--- a/src/southbridge/via/vt8235/vt8235.c
+++ b/src/southbridge/via/vt8235/vt8235.c
@@ -10,7 +10,7 @@
/*
* Base VT8235.
*/
-static device_t lpc_dev;
+static int enabled = 0;
void hard_reset(void)
{
@@ -22,18 +22,15 @@ static void keyboard_on(struct device *dev)
unsigned char regval;
regval = pci_read_config8(dev, 0x51);
-// regval |= 0x0f;
- /* !!!FIX let's try this */
- regval |= 0x1d;
+ regval |= 0x05;
+ regval &= 0xfd;
pci_write_config8(dev, 0x51, regval);
init_pc_keyboard(0x60, 0x64, 0);
}
-void dump_south(void)
+void dump_south(device_t dev0)
{
- device_t dev0;
- dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0);
int i,j;
for(i = 0; i < 256; i += 16) {
@@ -45,23 +42,53 @@ void dump_south(void)
}
}
-void set_led(struct device *dev)
+void set_led()
{
// set power led to steady now that lxbios has virtually done its job
+ device_t dev;
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0);
pci_write_config8(dev, 0x94, 0xb0);
}
+
static void vt8235_enable(struct device *dev)
{
struct southbridge_via_vt8235_config *conf = dev->chip_info;
+ unsigned char regval;
+ unsigned short vendor,model;
+
+
+ vendor = pci_read_config16(dev,0);
+ model = pci_read_config16(dev,0x2);
+
+ printk_debug("In vt8235_enable %04x %04x.\n",vendor,model);
+
+ /* if this is not the southbridge itself just return */
+ /* this is necessary because USB devices are slot 10, whereas this device is slot 11
+ therefore usb devices get called first during the bus scan */
+
+ if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235))
+ return;
+
+ printk_debug("Initialising Devices\n");
+
+
+ setup_i8259(); // make sure interupt controller is configured before keyboard init
+
+ /* enable RTC and ethernet */
+ regval = pci_read_config8(dev, 0x51);
+ regval |= 0x18;
+ pci_write_config8(dev, 0x51, regval);
+
+ /* turn on keyboard */
+ keyboard_on(dev);
+
+ /* enable USB 1.1 & USB 2.0 -redundant really since we've already been there - see note above*/
+ regval = pci_read_config8(dev, 0x50);
+ regval &= ~(0x36);
+ pci_write_config8(dev, 0x50, regval);
+
- printk_debug("In vt8235_enable.\n");
- if (!lpc_dev) {
- lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_8235, 0);
- if (conf->enable_keyboard)
- keyboard_on(lpc_dev);
- }
}
struct chip_operations southbridge_via_vt8235_ops = {
diff --git a/src/southbridge/via/vt8235/vt8235.h b/src/southbridge/via/vt8235/vt8235.h
index c8e79fc480..f071371938 100644
--- a/src/southbridge/via/vt8235/vt8235.h
+++ b/src/southbridge/via/vt8235/vt8235.h
@@ -17,8 +17,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
/* winbond access routines and defines*/
diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c
index 1775203ca8..fedda9c3be 100644
--- a/src/southbridge/via/vt8235/vt8235_ide.c
+++ b/src/southbridge/via/vt8235/vt8235_ide.c
@@ -13,7 +13,7 @@ static void ide_init(struct device *dev)
printk_info("Enabling VIA IDE.\n");
- if (!conf->enable_native_ide) {
+ /*if (!conf->enable_native_ide) { */
/*
* Run the IDE controller in 'compatiblity mode - i.e. don't
* use PCI interrupts. Using PCI ints confuses linux for some
@@ -28,7 +28,7 @@ static void ide_init(struct device *dev)
enables = pci_read_config8(dev, 0x42);
printk_debug("enables in reg 0x42 read back as 0x%x\n",
enables);
- }
+ /* } */
enables = pci_read_config8(dev, 0x40);
printk_debug("enables in reg 0x40 0x%x\n", enables);
diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c
index 4a3c683f61..3e220940cd 100644
--- a/src/southbridge/via/vt8235/vt8235_lpc.c
+++ b/src/southbridge/via/vt8235/vt8235_lpc.c
@@ -10,21 +10,30 @@
#include "vt8235.h"
#include "chip.h"
-/*
- * Taken some liberties - changed irq structures to pins numbers so that it is
- * easier to change PCI irq assignments without having to change each PCI
- * function individually
- *
- * pciIrqs contains the irqs assigned for PCI pins A-D
- *
- * Setting will depend on motherboard as irqs can be quite scarce e.g on
- * EPIA-MII, 16 bit CF card wants a dedicated IRQ. A 16 bit card in pcmcia
- * socket may want another - for now only claim 3 interupts for PCI, leaving at
- * least one spare for CF. On EPIA-M one could allocated all four irqs to
- * different numbers since there are no cardbus devices
- */
-
-static const unsigned char pciIrqs[4] = { 11 , 5, 10 , 12 };
+/* The epia-m is really short on interrupts available, so PCI interupts A & D are ganged togther and so are B & C.
+ This is how the Award bios sets it up too.
+ epia can be more generous as it does not need to reserve interrupts for cardbus devices, but if changed then
+ make sure that ACPI dsdt is changed to suit.
+
+ IRQ 0 = timer
+ IRQ 1 = keyboard
+ IRQ 2 = cascade
+ IRQ 3 = COM 2
+ IRQ 4 = COM 1
+ IRQ 5 = available for PCI interrupts
+ IRQ 6 = floppy or availbale for PCI if floppy controller disabled
+ IRQ 7 = LPT or available if LPT port disabled
+ IRQ 8 = rtc
+ IRQ 9 = available for PCI interrupts
+ IRQ 10 = cardbus slot or available for PCI if no cardbus (ie epia)
+ IRQ 11 = cardbus slot or available for PCI if no cardbus (ie epia)
+ IRQ 12 = PS2 mouse (hardwired to 12)
+ IRQ 13 = legacy FPU interrupt
+ IRQ 14 = IDE controller 1
+ IRQ 15 = IDE controller 2
+
+*/
+static const unsigned char pciIrqs[4] = { 5 , 9 , 9, 5 };
static const unsigned char usbPins[4] = { 'A','B','C','D'};
static const unsigned char enetPins[4] = { 'A','B','C','D'};
@@ -32,14 +41,9 @@ static const unsigned char slotPins[4] = { 'B','C','D','A'};
static const unsigned char firewirePins[4] = { 'B','C','D','A'};
static const unsigned char vt8235Pins[4] = { 'A','B','C','D'};
static const unsigned char vgaPins[4] = { 'A','B','C','D'};
-static const unsigned char cbPins[4] = { 'A','B','C','D'};
+static const unsigned char cbPins[4] = { 'D','A','B','C'};
static const unsigned char riserPins[4] = { 'A','B','C','D'};
-/*
- Our IDSEL mappings are as follows
- PCI slot is AD31 (device 15) (00:14.0)
- Southbridge is AD28 (device 12) (00:11.0)
-*/
static unsigned char *pin_to_irq(const unsigned char *pin)
{
@@ -54,19 +58,12 @@ static unsigned char *pin_to_irq(const unsigned char *pin)
static void pci_routing_fixup(struct device *dev)
{
printk_info("%s: dev is %p\n", __FUNCTION__, dev);
- if (dev) {
- /* initialize PCI interupts - these assignments depend
- on the PCB routing of PINTA-D
-
- PINTA = IRQ11
- PINTB = IRQ5
- PINTC = IRQ10
- PINTD = IRQ12
- */
- pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
- pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) );
- pci_write_config8(dev, 0x57, pciIrqs[3] << 4);
- }
+
+ /* set up PCI IRQ routing */
+ pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
+ pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) );
+ pci_write_config8(dev, 0x57, pciIrqs[3] << 4);
+
// firewire built into southbridge
printk_info("setting firewire\n");
@@ -201,12 +198,6 @@ static void vt8235_init(struct device *dev)
// Set 0x58 to 0x03 to match Award
pci_write_config8(dev, 0x58, 0x03);
- // enable the ethernet/RTC
- if (dev) {
- enables = pci_read_config8(dev, 0x51);
- enables |= 0x18;
- pci_write_config8(dev, 0x51, enables);
- }
/* enable serial irq */
pci_write_config8(dev, 0x52, 0x9);
@@ -224,6 +215,36 @@ static void vt8235_init(struct device *dev)
rtc_init(0);
}
+/* total kludge to get lxb to call our childrens set/enable functions - these are not called unless this
+ device has a resource to set - so set a dummy one */
+void vt8235_read_resources(device_t dev)
+{
+
+ struct resource *resource;
+ pci_dev_read_resources(dev);
+ resource = new_resource(dev, 1);
+ resource->flags |= IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO | IORESOURCE_STORED;
+ resource->size = 2;
+ resource->base = 0x2e;
+
+}
+void vt8235_set_resources(device_t dev)
+{
+ struct resource *resource;
+ //resource = find_resource(dev,1);
+ //resource->flags |= IORESOURCE_STORED;
+ pci_dev_set_resources(dev);
+}
+
+void vt8235_enable_resources(device_t dev)
+{
+ /* vt8235 is not a pci bridge and has no resources of its own (other than standard PC i/o addresses)
+ however it does control the isa bus and so we need to manually call enable childrens resources on that bus */
+ pci_dev_enable_resources(dev);
+ enable_childrens_resources(dev);
+
+}
+
static void southbridge_init(struct device *dev)
{
vt8235_init(dev);
@@ -231,9 +252,9 @@ static void southbridge_init(struct device *dev)
}
static struct device_operations vt8235_lpc_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
+ .read_resources = vt8235_read_resources,
+ .set_resources = vt8235_set_resources,
+ .enable_resources = vt8235_enable_resources,
.init = &southbridge_init,
.scan_bus = scan_static_bus,
};
diff --git a/src/southbridge/via/vt8235/vt8235_usb.c b/src/southbridge/via/vt8235/vt8235_usb.c
index 24c6a17acb..8142c535da 100644
--- a/src/southbridge/via/vt8235/vt8235_usb.c
+++ b/src/southbridge/via/vt8235/vt8235_usb.c
@@ -5,11 +5,14 @@
#include <device/pci_ids.h>
#include "vt8235.h"
+/* really nothing to do here, both usb 1.1 & 2.0 are normal PCI devices and so get resources allocated
+ properly. They are part of the southbridge and are enabled in the chip enable function for the southbridge */
+
static void usb_init(struct device *dev)
{
printk_debug("Configuring VIA USB 1.1\n");
- pci_write_config8(dev, 0x04, 0x07);
+ /* pci_write_config8(dev, 0x04, 0x07); */
/*
* To disable; though do we need to do this?
@@ -25,6 +28,7 @@ static void usb_init(struct device *dev)
*/
}
+/*
static struct device_operations usb_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -39,3 +43,4 @@ static struct pci_driver northbridge_driver __pci_driver = {
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_82C586_2,
};
+*/ \ No newline at end of file
diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c
index 30d9592e5c..47a1ba48bb 100644
--- a/src/superio/via/vt1211/vt1211.c
+++ b/src/superio/via/vt1211/vt1211.c
@@ -14,8 +14,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
/* vt1211 routines and defines*/
@@ -58,6 +58,25 @@ static void pnp_exit_ext_func_mode(device_t dev)
outb(0xaa, dev->path.u.pnp.port);
}
+static void vt1211_set_iobase(device_t dev, unsigned index, unsigned iobase)
+{
+
+ switch (dev->path.u.pnp.device) {
+ case VT1211_FDC:
+ case VT1211_PP:
+ case VT1211_SP1:
+ case VT1211_SP2:
+ pnp_write_config(dev, index + 0, (iobase >> 2) & 0xff);
+ break;
+ case VT1211_HWM:
+ default:
+ pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff);
+ pnp_write_config(dev, index + 1, iobase & 0xff);
+ break;
+ }
+
+}
+
static void init_hwm(unsigned long base)
{
int i;
@@ -79,6 +98,9 @@ static void vt1211_init(struct device *dev)
}
switch (dev->path.u.pnp.device) {
+ case VT1211_FDC:
+ case VT1211_PP:
+ break;
case VT1211_SP1:
res0 = find_resource(dev, PNP_IDX_IO0);
init_uart8250(res0->base, &conf->com1);
@@ -95,24 +117,12 @@ static void vt1211_init(struct device *dev)
printk_info("vt1211 asked to initialise unknown device!\n");
}
- /* activate com2
- start_conf_pnp(3);
- write_pnp(0x60,0xbe);
- write_pnp(0x70,0x3);
- write_pnp(0xf0,0x02);
- write_pnp(0x30,0x01);
- end_conf_pnp();
-
- // Activate the vt1211 hardware monitor
- start_conf_pnp(0x0b);
- write_pnp(0x60,0xec);
- write_pnp(0x30,1);
- end_conf_pnp(); */
}
void vt1211_pnp_enable_resources(device_t dev)
{
+ printk_debug("%s - enabling\n",dev_path(dev));
pnp_enter_ext_func_mode(dev);
pnp_enable_resources(dev);
pnp_exit_ext_func_mode(dev);
@@ -120,8 +130,54 @@ void vt1211_pnp_enable_resources(device_t dev)
void vt1211_pnp_set_resources(struct device *dev)
{
+ int i;
+ struct resource *resource;
+
+#if CONFIG_CONSOLE_SERIAL8250 == 1
+ if( dev->path.u.pnp.device == 2 ){
+ for( i = 0 ; i < dev->resources; i++){
+ resource = &dev->resource[i];
+ resource->flags |= IORESOURCE_STORED;
+ report_resource_stored(dev, resource, "");
+ }
+ return;
+ }
+#endif
pnp_enter_ext_func_mode(dev);
- pnp_set_resources(dev);
+ /* Select the device */
+ pnp_set_logical_device(dev);
+
+ /* Paranoia says I should disable the device here... */
+ for(i = 0; i < dev->resources; i++) {
+ resource = &dev->resource[i];
+ if (!(resource->flags & IORESOURCE_ASSIGNED)) {
+ printk_err("ERROR: %s %02x %s size: 0x%010Lx not assigned\n",
+ dev_path(dev), dev->resource->index,
+ resource_type(resource),
+ resource->size);
+ continue;
+ }
+
+ /* Now store the resource */
+ if (resource->flags & IORESOURCE_IO) {
+ vt1211_set_iobase(dev, resource->index, resource->base);
+ }
+ else if (resource->flags & IORESOURCE_DRQ) {
+ pnp_set_drq(dev, resource->index, resource->base);
+ }
+ else if (resource->flags & IORESOURCE_IRQ) {
+ pnp_set_irq(dev, resource->index, resource->base);
+ }
+ else {
+ printk_err("ERROR: %s %02x unknown resource type\n",
+ dev_path(dev), resource->index);
+ return;
+ }
+ resource->flags |= IORESOURCE_STORED;
+
+ report_resource_stored(dev, resource, "");
+ }
+
pnp_exit_ext_func_mode(dev);
}
@@ -148,7 +204,7 @@ static struct pnp_info pnp_dev_info[] = {
{ &ops, VT1211_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
{ &ops, VT1211_SP1, PNP_IO0 | PNP_IRQ0, { 0x07f8, 0}, },
{ &ops, VT1211_SP2, PNP_IO0 | PNP_IRQ0, { 0x07f8, 0}, },
- { &ops, VT1211_HWM, PNP_IO0 , { 0xfff8, 0 }, },
+ { &ops, VT1211_HWM, PNP_IO0 , { 0xff00, 0 }, },
};
static void enable_dev(struct device *dev)