diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/arch/i386/boot/coreboot_table.c | 12 | ||||
| -rw-r--r-- | src/arch/i386/boot/coreboot_table.h | 3 | ||||
| -rw-r--r-- | src/config/Options.lb | 6 | ||||
| -rw-r--r-- | src/include/boot/coreboot_tables.h | 6 | ||||
| -rw-r--r-- | src/mainboard/amd/dbm690t/Options.lb | 2 | ||||
| -rw-r--r-- | src/mainboard/amd/dbm690t/mainboard.c | 21 | ||||
| -rw-r--r-- | src/southbridge/amd/rs690/rs690_cmn.c | 2 |
7 files changed, 34 insertions, 18 deletions
diff --git a/src/arch/i386/boot/coreboot_table.c b/src/arch/i386/boot/coreboot_table.c index 427b978d96..e74e3e9fef 100644 --- a/src/arch/i386/boot/coreboot_table.c +++ b/src/arch/i386/boot/coreboot_table.c @@ -357,7 +357,8 @@ static void lb_remove_memory_range(struct lb_memory *mem, } } -static void lb_add_memory_range(struct lb_memory *mem, +/* This function is used in mainboard specific code, too */ +void lb_add_memory_range(struct lb_memory *mem, uint32_t type, uint64_t start, uint64_t size) { lb_remove_memory_range(mem, start, size); @@ -447,15 +448,10 @@ unsigned long write_coreboot_table( lb_add_memory_range(mem, LB_MEM_TABLE, rom_table_start, rom_table_end-rom_table_start); - /* AMD rs690 chip, we should remove the UMA from system memory. */ -#if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n", - uma_memory_start, uma_memory_size); - lb_add_memory_range(mem, LB_MEM_TABLE, - uma_memory_start, uma_memory_size); +#if (HAVE_MAINBOARD_RESOURCES == 1) + add_mainboard_resources(mem); #endif - /* Note: * I assume that there is always memory at immediately after * the low_table_end. This means that after I setup the coreboot table. diff --git a/src/arch/i386/boot/coreboot_table.h b/src/arch/i386/boot/coreboot_table.h index a5ba0f5963..4c8c44a18c 100644 --- a/src/arch/i386/boot/coreboot_table.h +++ b/src/arch/i386/boot/coreboot_table.h @@ -26,4 +26,7 @@ struct lb_memory *get_lb_mem(void); extern struct cmos_option_table option_table; +/* defined by mainboard.c if the mainboard requires extra resources */ +int add_mainboard_resources(struct lb_memory *mem); + #endif /* COREBOOT_TABLE_H */ diff --git a/src/config/Options.lb b/src/config/Options.lb index 5dfa013e7b..2301905712 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -1101,6 +1101,12 @@ define CONFIG_GFXUMA comment "GFX UMA" end +define HAVE_MAINBOARD_RESOURCES + default 0 + export always + comment "Enable if the mainboard/chipset requires extra entries in the memory map" +end + define CONFIG_SPLASH_GRAPHIC default 0 export used diff --git a/src/include/boot/coreboot_tables.h b/src/include/boot/coreboot_tables.h index e9e1b8f3de..3f8e60698e 100644 --- a/src/include/boot/coreboot_tables.h +++ b/src/include/boot/coreboot_tables.h @@ -43,12 +43,6 @@ * See also: util/lbtdump/lbtdump.c */ -/* AMD rs690 chip, declare global variables. */ -#if (CONFIG_GFXUMA == 1) - unsigned long uma_memory_start, uma_memory_size; -#endif - - struct lb_uint64 { uint32_t lo; uint32_t hi; diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb index cf73999a4f..b5ec9a62cf 100644 --- a/src/mainboard/amd/dbm690t/Options.lb +++ b/src/mainboard/amd/dbm690t/Options.lb @@ -91,6 +91,7 @@ uses CONFIG_USE_PRINTK_IN_CAR uses CONFIG_VIDEO_MB uses CONFIG_GFXUMA +uses HAVE_MAINBOARD_RESOURCES ### ### Build options @@ -299,6 +300,7 @@ default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" default CONFIG_VIDEO_MB=1 default CONFIG_GFXUMA=1 +default HAVE_MAINBOARD_RESOURCES=1 ### End Options.lb end diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c index 568670f737..72bf04bd29 100644 --- a/src/mainboard/amd/dbm690t/mainboard.c +++ b/src/mainboard/amd/dbm690t/mainboard.c @@ -41,6 +41,8 @@ extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, #define ADT7461_write_byte(address, val) \ do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) +unsigned long uma_memory_start, uma_memory_size; + /******************************************************** * dbm690t uses a BCM5789 as on-board NIC. * It has a pin named LOW_POWER to enable it into LOW POWER state. @@ -241,13 +243,24 @@ void dbm690t_enable(device_t dev) get_ide_dma66(); set_thermal_config(); } + +int add_mainboard_resources(struct lb_memory *mem) +{ + /* UMA is removed from system memory in the northbridge code, but + * in some circumstances we want the memory mentioned as reserved. + */ +#if (CONFIG_GFXUMA == 1) + printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n", + uma_memory_start, uma_memory_size); + lb_add_memory_range(mem, LB_MEM_RESERVED, + uma_memory_start, uma_memory_size); +#endif +} /* * CONFIG_CHIP_NAME defined in Option.lb. */ struct chip_operations mainboard_amd_dbm690t_ops = { -#if CONFIG_CHIP_NAME == 1 - CHIP_NAME("AMD Dbm690t Mainboard") -#endif - .enable_dev = dbm690t_enable, + CHIP_NAME("AMD DBM690T Mainboard") + .enable_dev = dbm690t_enable, }; diff --git a/src/southbridge/amd/rs690/rs690_cmn.c b/src/southbridge/amd/rs690/rs690_cmn.c index b714dc87c5..d50a48547c 100644 --- a/src/southbridge/amd/rs690/rs690_cmn.c +++ b/src/southbridge/amd/rs690/rs690_cmn.c @@ -307,6 +307,8 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) */ void rs690_set_tom(device_t nb_dev) { + extern unsigned long uma_memory_start; + /* set TOM */ pci_write_config32(nb_dev, 0x90, uma_memory_start); nbmc_write_index(nb_dev, 0x1e, uma_memory_start); |