summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/amd/lx/pll_reset.c2
-rw-r--r--src/northbridge/amd/lx/raminit.c18
2 files changed, 10 insertions, 10 deletions
diff --git a/src/northbridge/amd/lx/pll_reset.c b/src/northbridge/amd/lx/pll_reset.c
index 8462e64a67..ecd482f603 100644
--- a/src/northbridge/amd/lx/pll_reset.c
+++ b/src/northbridge/amd/lx/pll_reset.c
@@ -30,7 +30,7 @@ static void pll_reset(char manualconf)
print_debug_hex32(msrGlcpSysRstpll.hi);
print_debug(":");
print_debug_hex32(msrGlcpSysRstpll.lo);
- print_debug("\r\n");
+ print_debug("\n");
POST_CODE(POST_PLL_INIT);
if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) {
diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c
index fd496d80f4..819a01670c 100644
--- a/src/northbridge/amd/lx/raminit.c
+++ b/src/northbridge/amd/lx/raminit.c
@@ -45,7 +45,7 @@ static void auto_size_dimm(unsigned int dimm)
/* EEPROM byte usage: (5) Number of DIMM Banks */
spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS);
if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) {
- print_debug("Number of module banks not compatible\r\n");
+ print_debug("Number of module banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
@@ -55,7 +55,7 @@ static void auto_size_dimm(unsigned int dimm)
/* EEPROM byte usage: (17) Number of Banks on SDRAM Device */
spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) {
- print_debug("Number of device banks not compatible\r\n");
+ print_debug("Number of device banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
@@ -70,7 +70,7 @@ static void auto_size_dimm(unsigned int dimm)
*/
if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0)
|| (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) {
- print_debug("Assymetirc DIMM not compatible\r\n");
+ print_debug("Assymetirc DIMM not compatible\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
@@ -83,7 +83,7 @@ static void auto_size_dimm(unsigned int dimm)
dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
dimm_size = __builtin_ctz(dimm_size);
if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */
- print_debug("Only support up to 1 GB per DIMM\r\n");
+ print_debug("Only support up to 1 GB per DIMM\n");
POST_CODE(ERROR_DENSITY_DIMM);
__asm__ __volatile__("hlt\n");
}
@@ -114,7 +114,7 @@ static void auto_size_dimm(unsigned int dimm)
spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF];
if (spd_byte > MAX_COL_ADDR) {
- print_debug("DIMM page size not compatible\r\n");
+ print_debug("DIMM page size not compatible\n");
POST_CODE(ERROR_SET_PAGE);
__asm__ __volatile__("hlt\n");
}
@@ -152,7 +152,7 @@ static void checkDDRMax(void)
/* I don't think you need this check.
if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){
- print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
+ print_debug("DIMM overclocked. Check GeodeLink Speed\n");
POST_CODE(POST_PLL_MEM_FAIL);
__asm__ __volatile__("hlt\n");
} */
@@ -549,7 +549,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
}
spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES);
if ((spd_byte != 0xFF) && (spd_byte & 3)) {
- print_debug("DIMM1 NOT COMPATIBLE\r\n");
+ print_debug("DIMM1 NOT COMPATIBLE\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
@@ -718,7 +718,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= (209 << 8); /* bits[15:8] = 209 */
wrmsr(msrnum, msr);
- print_debug("DRAM controller init done.\r\n");
+ print_debug("DRAM controller init done.\n");
POST_CODE(POST_MEM_SETUP_GOOD); //0x7E
/* make sure there is nothing stale in the cache */
@@ -750,6 +750,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= 1;
wrmsr(msrnum, msr);
}
- print_debug("RAM DLL lock\r\n");
+ print_debug("RAM DLL lock\n");
}