summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/southbridge/intel/common/smbus.c73
1 files changed, 41 insertions, 32 deletions
diff --git a/src/southbridge/intel/common/smbus.c b/src/southbridge/intel/common/smbus.c
index 9546258b5c..00ff1dd4c2 100644
--- a/src/southbridge/intel/common/smbus.c
+++ b/src/southbridge/intel/common/smbus.c
@@ -72,6 +72,16 @@ static void smbus_delay(void)
inb(0x80);
}
+static void host_outb(unsigned int base, u8 reg, u8 value)
+{
+ outb(value, base + reg);
+}
+
+static u8 host_inb(unsigned int base, u8 reg)
+{
+ return inb(base + reg);
+}
+
static int host_completed(u8 status)
{
if (status & SMBHSTSTS_HOST_BUSY)
@@ -111,7 +121,7 @@ static int setup_command(unsigned int smbus_base, u8 ctrl, u8 xmitadd)
do {
smbus_delay();
- host_busy = inb(smbus_base + SMBHSTSTAT) & SMBHSTSTS_HOST_BUSY;
+ host_busy = host_inb(smbus_base, SMBHSTSTAT) & SMBHSTSTS_HOST_BUSY;
} while (--loops && host_busy);
if (loops == 0)
@@ -119,14 +129,14 @@ static int setup_command(unsigned int smbus_base, u8 ctrl, u8 xmitadd)
SMBUS_WAIT_UNTIL_READY_TIMEOUT);
/* Clear any lingering errors, so the transaction will run. */
- outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+ host_outb(smbus_base, SMBHSTSTAT, host_inb(smbus_base, SMBHSTSTAT));
/* Set up transaction */
/* Disable interrupts */
- outb(ctrl, (smbus_base + SMBHSTCTL));
+ host_outb(smbus_base, SMBHSTCTL, ctrl);
/* Set the device I'm talking to. */
- outb(xmitadd, smbus_base + SMBXMITADD);
+ host_outb(smbus_base, SMBXMITADD, xmitadd);
return 0;
}
@@ -137,8 +147,7 @@ static int execute_command(unsigned int smbus_base)
u8 status;
/* Start the command. */
- outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START),
- smbus_base + SMBHSTCTL);
+ host_outb(smbus_base, SMBHSTCTL, host_inb(smbus_base, SMBHSTCTL) | SMBHSTCNT_START);
/* Poll for it to start. */
do {
@@ -147,7 +156,7 @@ static int execute_command(unsigned int smbus_base)
/* If we poll too slow, we could miss HOST_BUSY flag
* set and detect INTR or x_ERR flags instead here.
*/
- status = inb(smbus_base + SMBHSTSTAT);
+ status = host_inb(smbus_base, SMBHSTSTAT);
status &= ~(SMBHSTSTS_SMBALERT_STS | SMBHSTSTS_INUSE_STS);
} while (--loops && status == 0);
@@ -165,7 +174,7 @@ static int complete_command(unsigned int smbus_base)
do {
smbus_delay();
- status = inb(smbus_base + SMBHSTSTAT);
+ status = host_inb(smbus_base, SMBHSTSTAT);
} while (--loops && !host_completed(status));
if (loops == 0)
@@ -187,11 +196,11 @@ static int smbus_read_cmd(unsigned int smbus_base, u8 ctrl, u8 device,
return ret;
/* Set the command/address... */
- outb(address, smbus_base + SMBHSTCMD);
+ host_outb(smbus_base, SMBHSTCMD, address);
/* Clear the data bytes... */
- outb(0, smbus_base + SMBHSTDAT0);
- outb(0, smbus_base + SMBHSTDAT1);
+ host_outb(smbus_base, SMBHSTDAT0, 0);
+ host_outb(smbus_base, SMBHSTDAT1, 0);
/* Start the command */
ret = execute_command(smbus_base);
@@ -204,9 +213,9 @@ static int smbus_read_cmd(unsigned int smbus_base, u8 ctrl, u8 device,
return ret;
/* Read results of transaction */
- word = inb(smbus_base + SMBHSTDAT0);
+ word = host_inb(smbus_base, SMBHSTDAT0);
if (ctrl == I801_WORD_DATA)
- word |= inb(smbus_base + SMBHSTDAT1) << 8;
+ word |= host_inb(smbus_base, SMBHSTDAT1) << 8;
return word;
}
@@ -222,12 +231,12 @@ static int smbus_write_cmd(unsigned int smbus_base, u8 ctrl, u8 device,
return ret;
/* Set the command/address... */
- outb(address, smbus_base + SMBHSTCMD);
+ host_outb(smbus_base, SMBHSTCMD, address);
/* Set the data bytes... */
- outb(data & 0xff, smbus_base + SMBHSTDAT0);
+ host_outb(smbus_base, SMBHSTDAT0, data & 0xff);
if (ctrl == I801_WORD_DATA)
- outb(data >> 8, smbus_base + SMBHSTDAT1);
+ host_outb(smbus_base, SMBHSTDAT1, data >> 8);
/* Start the command */
ret = execute_command(smbus_base);
@@ -256,16 +265,16 @@ static int block_cmd_loop(unsigned int smbus_base,
* was really updated with the transaction. */
if (!sw_drives_nak) {
if (is_write_cmd)
- outb(max_bytes, smbus_base + SMBHSTDAT0);
+ host_outb(smbus_base, SMBHSTDAT0, max_bytes);
else
- outb(0, smbus_base + SMBHSTDAT0);
+ host_outb(smbus_base, SMBHSTDAT0, 0);
}
/* Send first byte from buffer, bytes_sent increments after
* hardware acknowledges it.
*/
if (is_write_cmd)
- outb(*buf++, smbus_base + SMBBLKDAT);
+ host_outb(smbus_base, SMBBLKDAT, *buf++);
/* Start the command */
ret = execute_command(smbus_base);
@@ -274,24 +283,24 @@ static int block_cmd_loop(unsigned int smbus_base,
/* Poll for transaction completion */
do {
- status = inb(smbus_base + SMBHSTSTAT);
+ status = host_inb(smbus_base, SMBHSTSTAT);
if (status & SMBHSTSTS_BYTE_DONE) { /* Byte done */
if (is_write_cmd) {
bytes++;
if (bytes < max_bytes)
- outb(*buf++, smbus_base + SMBBLKDAT);
+ host_outb(smbus_base, SMBBLKDAT, *buf++);
} else {
if (bytes < max_bytes)
- *buf++ = inb(smbus_base + SMBBLKDAT);
+ *buf++ = host_inb(smbus_base, SMBBLKDAT);
bytes++;
/* Indicate that next byte is the last one. */
if (sw_drives_nak && (bytes + 1 >= max_bytes)) {
- outb(inb(smbus_base + SMBHSTCTL)
- | SMBHSTCNT_LAST_BYTE,
- smbus_base + SMBHSTCTL);
+ host_outb(smbus_base, SMBHSTCTL,
+ host_inb(smbus_base, SMBHSTCTL) |
+ SMBHSTCNT_LAST_BYTE);
}
}
@@ -300,7 +309,7 @@ static int block_cmd_loop(unsigned int smbus_base,
* and clears HOST_BUSY flag once the byte count
* has been reached or LAST_BYTE was set.
*/
- outb(SMBHSTSTS_BYTE_DONE, smbus_base + SMBHSTSTAT);
+ host_outb(smbus_base, SMBHSTSTAT, SMBHSTSTS_BYTE_DONE);
}
} while (--loops && !host_completed(status));
@@ -354,7 +363,7 @@ int do_smbus_block_read(unsigned int smbus_base, u8 device, u8 cmd,
return ret;
/* Set the command/address... */
- outb(cmd, smbus_base + SMBHSTCMD);
+ host_outb(smbus_base, SMBHSTCMD, cmd);
/* Execute block transaction. */
ret = block_cmd_loop(smbus_base, buf, max_bytes, BLOCK_READ);
@@ -362,7 +371,7 @@ int do_smbus_block_read(unsigned int smbus_base, u8 device, u8 cmd,
return ret;
/* Post-check we received complete message. */
- slave_bytes = inb(smbus_base + SMBHSTDAT0);
+ slave_bytes = host_inb(smbus_base, SMBHSTDAT0);
if (ret < slave_bytes)
return SMBUS_ERROR;
@@ -383,7 +392,7 @@ int do_smbus_block_write(unsigned int smbus_base, u8 device, u8 cmd,
return ret;
/* Set the command/address... */
- outb(cmd, smbus_base + SMBHSTCMD);
+ host_outb(smbus_base, SMBHSTCMD, cmd);
/* Execute block transaction. */
ret = block_cmd_loop(smbus_base, (u8 *)buf, bytes, BLOCK_WRITE);
@@ -425,7 +434,7 @@ int do_i2c_eeprom_read(unsigned int smbus_base, u8 device,
return ret;
/* device offset */
- outb(offset, smbus_base + SMBHSTDAT1);
+ host_outb(smbus_base, SMBHSTDAT1, offset);
/* Execute block transaction. */
ret = block_cmd_loop(smbus_base, buf, bytes, BLOCK_READ | BLOCK_I2C);
@@ -468,8 +477,8 @@ int do_i2c_block_write(unsigned int smbus_base, u8 device,
*/
cmd = *buf++;
bytes--;
- outb(cmd, smbus_base + SMBHSTCMD);
- outb(cmd, smbus_base + SMBHSTDAT1);
+ host_outb(smbus_base, SMBHSTCMD, cmd);
+ host_outb(smbus_base, SMBHSTDAT1, cmd);
/* Execute block transaction. */
ret = block_cmd_loop(smbus_base, buf, bytes, BLOCK_WRITE);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 01:24:13 +0000