diff options
Diffstat (limited to 'src')
25 files changed, 2251 insertions, 517 deletions
diff --git a/src/arch/i386/lib/cpu.c b/src/arch/i386/lib/cpu.c index 628bb79e91..11ccee211f 100644 --- a/src/arch/i386/lib/cpu.c +++ b/src/arch/i386/lib/cpu.c @@ -234,11 +234,13 @@ void cpu_initialize(void) // Check that we haven't been passed bad information as the result of a race // (i.e. BSP timed out while waiting for us to load secondary_stack) +#if CONFIG_SMP || CONFIG_IOPIC if (cpu->path.u.apic.apic_id != lapicid()) { printk_err("CPU #%d Initialization FAILED: APIC ID mismatch (%u != %u)\n", info->index, cpu->path.u.apic.apic_id, lapicid()); // return without setting initialized flag } else { +#endif /* Find what type of cpu we are dealing with */ identify_cpu(cpu); printk_debug("CPU: vendor %s device %x\n", @@ -255,8 +257,10 @@ void cpu_initialize(void) } printk_info("CPU #%d Initialized\n", info->index); - } +#if CONFIG_SMP || CONFIG_IOPIC + } +#endif return; } diff --git a/src/cpu/via/model_centaur/model_centaur_init.c b/src/cpu/via/model_centaur/model_centaur_init.c index b76b065ebb..33f10a831e 100644 --- a/src/cpu/via/model_centaur/model_centaur_init.c +++ b/src/cpu/via/model_centaur/model_centaur_init.c @@ -15,6 +15,7 @@ static void model_centaur_init(device_t dev) { /* Turn on caching if we haven't already */ x86_enable_cache(); + x86_setup_mtrrs(36); x86_mtrr_check(); /* Enable the local cpu apics */ @@ -28,6 +29,13 @@ static struct device_operations cpu_dev_ops = { #warning "FIXME - need correct cpu id here for VIA C3" static struct cpu_device_id cpu_table[] = { { X86_VENDOR_CENTAUR, 0x0670 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0671 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0672 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0673 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0674 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0675 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0676 }, // VIA C3 Samual 2 + { X86_VENDOR_CENTAUR, 0x0677 }, // VIA C3 Samual 2 { X86_VENDOR_CENTAUR, 0x0678 }, // VIA C3 Ezra { X86_VENDOR_CENTAUR, 0x0680 }, // VIA C3 Ezra-T { X86_VENDOR_CENTAUR, 0x0698 }, // VIA C3 Nehemiah diff --git a/src/devices/cardbus_device.c b/src/devices/cardbus_device.c index 4c92d91735..5b03d2827c 100644 --- a/src/devices/cardbus_device.c +++ b/src/devices/cardbus_device.c @@ -74,7 +74,14 @@ void cardbus_read_resources(device_t dev) resource_t moving_base, moving_limit, moving; unsigned long type; uint16_t ctl; - + unsigned long index; + + /* See if needs a card control registers base address */ + + pci_get_resource(dev, PCI_BASE_ADDRESS_0); + + compact_resources(dev); + /* See which bridge I/O resources are implemented */ moving_base = pci_moving_config32(dev, PCI_CB_IO_BASE_0); moving_limit = pci_moving_config32(dev, PCI_CB_IO_LIMIT_0); diff --git a/src/include/device/cardbus.h b/src/include/device/cardbus.h index 38aa41cab5..07cc46a54a 100644 --- a/src/include/device/cardbus.h +++ b/src/include/device/cardbus.h @@ -6,6 +6,7 @@ void cardbus_read_resources(device_t dev); unsigned int cardbus_scan_bus(struct bus *bus, unsigned min_devfn, unsigned max_devfn, unsigned int max); unsigned int cardbus_scan_bridge(device_t dev, unsigned int max); +void cardbus_enable_resources(device_t dev); extern struct device_operations default_cardbus_ops_bus; diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb index decbd0e3b1..6dc4b3d79a 100644 --- a/src/mainboard/via/epia-m/Config.lb +++ b/src/mainboard/via/epia-m/Config.lb @@ -45,6 +45,7 @@ arch i386 end driver mainboard.o if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +object vgabios.o if HAVE_ACPI_TABLES object fadt.o @@ -133,11 +134,6 @@ config chip.h chip northbridge/via/vt8623 device pci_domain 0 on chip southbridge/via/vt8235 - register "enable_usb" = "0" - register "enable_native_ide" = "0" - register "enable_com_ports" = "1" - register "enable_keyboard" = "0" - register "enable_nvram" = "1" device pci 10.0 on end # USB 1.1 device pci 10.1 on end # USB 1.1 @@ -151,7 +147,7 @@ chip northbridge/via/vt8623 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 on # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 drq 0x74 = 3 @@ -178,10 +174,16 @@ chip northbridge/via/vt8623 device pci 12.0 on end # Ethernet end # This is on the EPIA MII, not the M. -# chip southbridge/ricoh/rl5c476 -# end + chip southbridge/ricoh/rl5c476 + register "enable_cf" = "1" + device pci 0a.0 on end + device pci 0a.1 on end + end end - chip cpu/via/model_centaur + device apic_cluster 0 on + chip cpu/via/model_centaur + device apic 0 on end + end end end diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb index 4184236c5c..6c3193e78d 100644 --- a/src/mainboard/via/epia-m/Options.lb +++ b/src/mainboard/via/epia-m/Options.lb @@ -36,6 +36,8 @@ uses DEFAULT_CONSOLE_LOGLEVEL uses MAXIMUM_CONSOLE_LOGLEVEL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_UDELAY_TSC +uses CONFIG_PCI_ROM_RUN +uses CONFIG_CONSOLE_VGA ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE = 256*1024 @@ -43,6 +45,8 @@ default ROM_SIZE = 256*1024 ### ### Build options ### +default CONFIG_PCI_ROM_RUN=0 +default CONFIG_CONSOLE_VGA=0 ## ## Build code for the fallback boot @@ -70,6 +74,13 @@ default HAVE_HARD_RESET=1 default HAVE_PIRQ_TABLE=1 default IRQ_SLOT_COUNT=5 + +## +## Build code to load acpi tables +## +default HAVE_ACPI_TABLES=1 + + ## ## Build code to export a CMOS option table ## diff --git a/src/mainboard/via/epia-m/auto.c b/src/mainboard/via/epia-m/auto.c index 7d08de87bb..c69b7bf101 100644 --- a/src/mainboard/via/epia-m/auto.c +++ b/src/mainboard/via/epia-m/auto.c @@ -68,7 +68,7 @@ static void enable_mainboard_devices(void) die("Southbridge not found!!!\n"); } pci_write_config8(dev, 0x50, 0x80); - pci_write_config8(dev, 0x51, 0x1F); + pci_write_config8(dev, 0x51, 0x1f); #if 0 // This early setup switches IDE into compatibility mode before PCI gets // // a chance to assign I/Os @@ -141,14 +141,8 @@ static void main(unsigned long bist) print_debug(" Enabling shadow ram\r\n"); enable_shadow_ram(); - /* - memreset_setup(); - this is way more generic than we need. - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - */ - sdram_set_registers((const struct mem_controller *) 0); - sdram_set_spd_registers((const struct mem_controller *) 0); - sdram_enable(0, (const struct mem_controller *) 0); + + ddr_ram_setup((const struct mem_controller *)0); /* Check all of memory */ #if 0 diff --git a/src/mainboard/via/epia-m/dsdt.asl b/src/mainboard/via/epia-m/dsdt.asl new file mode 100644 index 0000000000..2fcb77ed3a --- /dev/null +++ b/src/mainboard/via/epia-m/dsdt.asl @@ -0,0 +1,256 @@ +/* + * Minimalist ACPI DSDT table for EPIA-M / MII + * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com> + * + * + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) +{ + /* + * Define the main processor + */ + Scope (\_PR) + { + Processor (\_PR.CPU0, 0x00, 0x00000410, 0x06) {} + } + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * any others would involve declaring the wake up methods + */ + Name (\_S0, Package () {0x00, 0x00, 0x00, 0x00 }) + Name (\_S5, Package () {0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (\_SB) + { + /* Define how interrupt Link A is plumbed in */ + Device (LNKA) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKA + + /* Define how interrupt Link B is plumbed in */ + Device (LNKB) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {9} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKB + + /* Define how interrupt Link C is plumbed in */ + Device (LNKC) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {9} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKC + + /* Define how interrupt Link D is plumbed in */ + Device (LNKD) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKD + + + /* top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package () {0x000AFFFF, 0x00, LNKD, 0x00}, // Cardbus Link D + Package () {0x000AFFFF, 0x01, LNKA, 0x00}, // Cardbus Link A + Package () {0x000AFFFF, 0x02, LNKB, 0x00}, // Cardbus Link B + Package () {0x000AFFFF, 0x03, LNKC, 0x00}, // Cardbus Link C + + Package () {0x000DFFFF, 0x00, LNKB, 0x00}, // Firewire Link B + Package () {0x000DFFFF, 0x01, LNKC, 0x00}, // Firewire Link C + Package () {0x000DFFFF, 0x02, LNKD, 0x00}, // Firewire Linc D + Package () {0x000DFFFF, 0x03, LNKA, 0x00}, // Firewire Link A + + Package () {0x0010FFFF, 0x00, LNKA, 0x00}, // USB Link A + Package () {0x0010FFFF, 0x01, LNKB, 0x00}, // USB Link B + Package () {0x0010FFFF, 0x02, LNKC, 0x00}, // USB Link C + Package () {0x0010FFFF, 0x03, LNKD, 0x00}, // USB Link D + + Package () {0x0011FFFF, 0x00, LNKA, 0x00}, // vt8623 Link A + Package () {0x0011FFFF, 0x01, LNKB, 0x00}, // vt8623 Link B + Package () {0x0011FFFF, 0x02, LNKC, 0x00}, // vt8623 Link C + Package () {0x0011FFFF, 0x03, LNKD, 0x00}, // vt8623 Link D + + Package () {0x0012FFFF, 0x00, LNKA, 0x00}, // LAN Link A + Package () {0x0012FFFF, 0x01, LNKB, 0x00}, // LAN Link B + Package () {0x0012FFFF, 0x02, LNKC, 0x00}, // LAN Link C + Package () {0x0012FFFF, 0x03, LNKD, 0x00}, // LAN Link D + + Package () {0x0013FFFF, 0x00, LNKA, 0x00}, // Riser slot LinkA + Package () {0x0013FFFF, 0x01, LNKB, 0x00}, // Riser slot LinkB + Package () {0x0013FFFF, 0x02, LNKC, 0x00}, // Riser slot LinkC + Package () {0x0013FFFF, 0x03, LNKD, 0x00}, // Riser slot LinkD + + Package () {0x0014FFFF, 0x00, LNKB, 0x00}, // Slot 1, Link B + Package () {0x0014FFFF, 0x01, LNKC, 0x00}, // Slot 1, Link C + Package () {0x0014FFFF, 0x02, LNKD, 0x00}, // Slot 1, Link D + Package () {0x0014FFFF, 0x03, LNKA, 0x00}, // Slot 1, Link A + + Package () {0x0001FFFF, 0x00, LNKA, 0x00}, // VGA Link A + Package () {0x0001FFFF, 0x01, LNKB, 0x00}, // VGA Link B + Package () {0x0001FFFF, 0x02, LNKC, 0x00}, // VGA Link C + Package () {0x0001FFFF, 0x03, LNKD, 0x00} // VGA Link D + + }) + + + } // End of PCI0 + + } // End of _SB + +} // End of Definition Block + diff --git a/src/mainboard/via/epia-m/dsdt.c b/src/mainboard/via/epia-m/dsdt.c new file mode 100644 index 0000000000..62b0f3dab0 --- /dev/null +++ b/src/mainboard/via/epia-m/dsdt.c @@ -0,0 +1,142 @@ +/* + * + * Intel ACPI Component Architecture + * ASL Optimizing Compiler / AML Disassembler version 20040715 [Aug 16 2004] + * Copyright (C) 2000 - 2004 Intel Corporation + * Supports ACPI Specification Revision 2.0c + * + * Compilation of "dsdt.asl" - Thu Oct 27 09:25:57 2005 + * + * C source code output + * + */ +unsigned char AmlCode[] = +{ + 0x44,0x53,0x44,0x54,0xF0,0x03,0x00,0x00, /* 00000000 "DSDT...." */ + 0x01,0x11,0x4C,0x58,0x42,0x49,0x4F,0x53, /* 00000008 "..LXBIOS" */ + 0x4C,0x58,0x42,0x2D,0x44,0x53,0x44,0x54, /* 00000010 "LXB-DSDT" */ + 0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ + 0x15,0x07,0x04,0x20,0x10,0x12,0x5F,0x50, /* 00000020 "... .._P" */ + 0x52,0x5F,0x5B,0x83,0x0B,0x43,0x50,0x55, /* 00000028 "R_[..CPU" */ + 0x30,0x00,0x10,0x04,0x00,0x00,0x06,0x08, /* 00000030 "0......." */ + 0x5F,0x53,0x30,0x5F,0x12,0x06,0x04,0x00, /* 00000038 "_S0_...." */ + 0x00,0x00,0x00,0x08,0x5F,0x53,0x35,0x5F, /* 00000040 "...._S5_" */ + 0x12,0x08,0x04,0x0A,0x02,0x0A,0x02,0x00, /* 00000048 "........" */ + 0x00,0x10,0x4E,0x39,0x5F,0x53,0x42,0x5F, /* 00000050 "..N9_SB_" */ + 0x5B,0x82,0x44,0x06,0x4C,0x4E,0x4B,0x41, /* 00000058 "[.D.LNKA" */ + 0x08,0x5F,0x48,0x49,0x44,0x0C,0x41,0xD0, /* 00000060 "._HID.A." */ + 0x0C,0x0F,0x08,0x5F,0x55,0x49,0x44,0x01, /* 00000068 "..._UID." */ + 0x14,0x09,0x5F,0x53,0x54,0x41,0x00,0xA4, /* 00000070 ".._STA.." */ + 0x0A,0x0B,0x14,0x1A,0x5F,0x43,0x52,0x53, /* 00000078 "...._CRS" */ + 0x00,0x08,0x42,0x55,0x46,0x46,0x11,0x09, /* 00000080 "..BUFF.." */ + 0x0A,0x06,0x23,0x20,0x00,0x18,0x79,0x00, /* 00000088 "..# ..y." */ + 0xA4,0x42,0x55,0x46,0x46,0x14,0x1A,0x5F, /* 00000090 ".BUFF.._" */ + 0x50,0x52,0x53,0x00,0x08,0x42,0x55,0x46, /* 00000098 "PRS..BUF" */ + 0x46,0x11,0x09,0x0A,0x06,0x23,0x20,0x06, /* 000000A0 "F....# ." */ + 0x18,0x79,0x00,0xA4,0x42,0x55,0x46,0x46, /* 000000A8 ".y..BUFF" */ + 0x14,0x06,0x5F,0x53,0x52,0x53,0x01,0x14, /* 000000B0 ".._SRS.." */ + 0x06,0x5F,0x44,0x49,0x53,0x00,0x5B,0x82, /* 000000B8 "._DIS.[." */ + 0x45,0x06,0x4C,0x4E,0x4B,0x42,0x08,0x5F, /* 000000C0 "E.LNKB._" */ + 0x48,0x49,0x44,0x0C,0x41,0xD0,0x0C,0x0F, /* 000000C8 "HID.A..." */ + 0x08,0x5F,0x55,0x49,0x44,0x0A,0x02,0x14, /* 000000D0 "._UID..." */ + 0x09,0x5F,0x53,0x54,0x41,0x00,0xA4,0x0A, /* 000000D8 "._STA..." */ + 0x0B,0x14,0x1A,0x5F,0x43,0x52,0x53,0x00, /* 000000E0 "..._CRS." */ + 0x08,0x42,0x55,0x46,0x46,0x11,0x09,0x0A, /* 000000E8 ".BUFF..." */ + 0x06,0x23,0x00,0x02,0x18,0x79,0x00,0xA4, /* 000000F0 ".#...y.." */ + 0x42,0x55,0x46,0x46,0x14,0x1A,0x5F,0x50, /* 000000F8 "BUFF.._P" */ + 0x52,0x53,0x00,0x08,0x42,0x55,0x46,0x46, /* 00000100 "RS..BUFF" */ + 0x11,0x09,0x0A,0x06,0x23,0x20,0x06,0x18, /* 00000108 "....# .." */ + 0x79,0x00,0xA4,0x42,0x55,0x46,0x46,0x14, /* 00000110 "y..BUFF." */ + 0x06,0x5F,0x53,0x52,0x53,0x01,0x14,0x06, /* 00000118 "._SRS..." */ + 0x5F,0x44,0x49,0x53,0x00,0x5B,0x82,0x45, /* 00000120 "_DIS.[.E" */ + 0x06,0x4C,0x4E,0x4B,0x43,0x08,0x5F,0x48, /* 00000128 ".LNKC._H" */ + 0x49,0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08, /* 00000130 "ID.A...." */ + 0x5F,0x55,0x49,0x44,0x0A,0x03,0x14,0x09, /* 00000138 "_UID...." */ + 0x5F,0x53,0x54,0x41,0x00,0xA4,0x0A,0x0B, /* 00000140 "_STA...." */ + 0x14,0x1A,0x5F,0x43,0x52,0x53,0x00,0x08, /* 00000148 ".._CRS.." */ + 0x42,0x55,0x46,0x46,0x11,0x09,0x0A,0x06, /* 00000150 "BUFF...." */ + 0x23,0x00,0x02,0x18,0x79,0x00,0xA4,0x42, /* 00000158 "#...y..B" */ + 0x55,0x46,0x46,0x14,0x1A,0x5F,0x50,0x52, /* 00000160 "UFF.._PR" */ + 0x53,0x00,0x08,0x42,0x55,0x46,0x46,0x11, /* 00000168 "S..BUFF." */ + 0x09,0x0A,0x06,0x23,0x20,0x06,0x18,0x79, /* 00000170 "...# ..y" */ + 0x00,0xA4,0x42,0x55,0x46,0x46,0x14,0x06, /* 00000178 "..BUFF.." */ + 0x5F,0x53,0x52,0x53,0x01,0x14,0x06,0x5F, /* 00000180 "_SRS..._" */ + 0x44,0x49,0x53,0x00,0x5B,0x82,0x45,0x06, /* 00000188 "DIS.[.E." */ + 0x4C,0x4E,0x4B,0x44,0x08,0x5F,0x48,0x49, /* 00000190 "LNKD._HI" */ + 0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08,0x5F, /* 00000198 "D.A...._" */ + 0x55,0x49,0x44,0x0A,0x04,0x14,0x09,0x5F, /* 000001A0 "UID...._" */ + 0x53,0x54,0x41,0x00,0xA4,0x0A,0x0B,0x14, /* 000001A8 "STA....." */ + 0x1A,0x5F,0x43,0x52,0x53,0x00,0x08,0x42, /* 000001B0 "._CRS..B" */ + 0x55,0x46,0x46,0x11,0x09,0x0A,0x06,0x23, /* 000001B8 "UFF....#" */ + 0x20,0x00,0x18,0x79,0x00,0xA4,0x42,0x55, /* 000001C0 " ..y..BU" */ + 0x46,0x46,0x14,0x1A,0x5F,0x50,0x52,0x53, /* 000001C8 "FF.._PRS" */ + 0x00,0x08,0x42,0x55,0x46,0x46,0x11,0x09, /* 000001D0 "..BUFF.." */ + 0x0A,0x06,0x23,0x20,0x06,0x18,0x79,0x00, /* 000001D8 "..# ..y." */ + 0xA4,0x42,0x55,0x46,0x46,0x14,0x06,0x5F, /* 000001E0 ".BUFF.._" */ + 0x53,0x52,0x53,0x01,0x14,0x06,0x5F,0x44, /* 000001E8 "SRS..._D" */ + 0x49,0x53,0x00,0x5B,0x82,0x4B,0x1F,0x50, /* 000001F0 "IS.[.K.P" */ + 0x43,0x49,0x30,0x08,0x5F,0x48,0x49,0x44, /* 000001F8 "CI0._HID" */ + 0x0C,0x41,0xD0,0x0A,0x03,0x08,0x5F,0x41, /* 00000200 ".A...._A" */ + 0x44,0x52,0x00,0x08,0x5F,0x55,0x49,0x44, /* 00000208 "DR.._UID" */ + 0x00,0x08,0x5F,0x42,0x42,0x4E,0x00,0x08, /* 00000210 ".._BBN.." */ + 0x5F,0x50,0x52,0x54,0x12,0x43,0x1D,0x20, /* 00000218 "_PRT.C. " */ + 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x0A,0x00, /* 00000220 "........" */ + 0x00,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0D, /* 00000228 ".LNKD..." */ + 0x04,0x0C,0xFF,0xFF,0x0A,0x00,0x01,0x4C, /* 00000230 ".......L" */ + 0x4E,0x4B,0x41,0x00,0x12,0x0E,0x04,0x0C, /* 00000238 "NKA....." */ + 0xFF,0xFF,0x0A,0x00,0x0A,0x02,0x4C,0x4E, /* 00000240 "......LN" */ + 0x4B,0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF, /* 00000248 "KB......" */ + 0xFF,0x0A,0x00,0x0A,0x03,0x4C,0x4E,0x4B, /* 00000250 ".....LNK" */ + 0x43,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000258 "C......." */ + 0x0D,0x00,0x00,0x4C,0x4E,0x4B,0x42,0x00, /* 00000260 "...LNKB." */ + 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x0D,0x00, /* 00000268 "........" */ + 0x01,0x4C,0x4E,0x4B,0x43,0x00,0x12,0x0E, /* 00000270 ".LNKC..." */ + 0x04,0x0C,0xFF,0xFF,0x0D,0x00,0x0A,0x02, /* 00000278 "........" */ + 0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0E,0x04, /* 00000280 "LNKD...." */ + 0x0C,0xFF,0xFF,0x0D,0x00,0x0A,0x03,0x4C, /* 00000288 ".......L" */ + 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 00000290 "NKA....." */ + 0xFF,0xFF,0x10,0x00,0x00,0x4C,0x4E,0x4B, /* 00000298 ".....LNK" */ + 0x41,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 000002A0 "A......." */ + 0x10,0x00,0x01,0x4C,0x4E,0x4B,0x42,0x00, /* 000002A8 "...LNKB." */ + 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x10,0x00, /* 000002B0 "........" */ + 0x0A,0x02,0x4C,0x4E,0x4B,0x43,0x00,0x12, /* 000002B8 "..LNKC.." */ + 0x0E,0x04,0x0C,0xFF,0xFF,0x10,0x00,0x0A, /* 000002C0 "........" */ + 0x03,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0D, /* 000002C8 ".LNKD..." */ + 0x04,0x0C,0xFF,0xFF,0x11,0x00,0x00,0x4C, /* 000002D0 ".......L" */ + 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 000002D8 "NKA....." */ + 0xFF,0xFF,0x11,0x00,0x01,0x4C,0x4E,0x4B, /* 000002E0 ".....LNK" */ + 0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF, /* 000002E8 "B......." */ + 0x11,0x00,0x0A,0x02,0x4C,0x4E,0x4B,0x43, /* 000002F0 "....LNKC" */ + 0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x11, /* 000002F8 "........" */ + 0x00,0x0A,0x03,0x4C,0x4E,0x4B,0x44,0x00, /* 00000300 "...LNKD." */ + 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x12,0x00, /* 00000308 "........" */ + 0x00,0x4C,0x4E,0x4B,0x41,0x00,0x12,0x0D, /* 00000310 ".LNKA..." */ + 0x04,0x0C,0xFF,0xFF,0x12,0x00,0x01,0x4C, /* 00000318 ".......L" */ + 0x4E,0x4B,0x42,0x00,0x12,0x0E,0x04,0x0C, /* 00000320 "NKB....." */ + 0xFF,0xFF,0x12,0x00,0x0A,0x02,0x4C,0x4E, /* 00000328 "......LN" */ + 0x4B,0x43,0x00,0x12,0x0E,0x04,0x0C,0xFF, /* 00000330 "KC......" */ + 0xFF,0x12,0x00,0x0A,0x03,0x4C,0x4E,0x4B, /* 00000338 ".....LNK" */ + 0x44,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000340 "D......." */ + 0x13,0x00,0x00,0x4C,0x4E,0x4B,0x41,0x00, /* 00000348 "...LNKA." */ + 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x13,0x00, /* 00000350 "........" */ + 0x01,0x4C,0x4E,0x4B,0x42,0x00,0x12,0x0E, /* 00000358 ".LNKB..." */ + 0x04,0x0C,0xFF,0xFF,0x13,0x00,0x0A,0x02, /* 00000360 "........" */ + 0x4C,0x4E,0x4B,0x43,0x00,0x12,0x0E,0x04, /* 00000368 "LNKC...." */ + 0x0C,0xFF,0xFF,0x13,0x00,0x0A,0x03,0x4C, /* 00000370 ".......L" */ + 0x4E,0x4B,0x44,0x00,0x12,0x0D,0x04,0x0C, /* 00000378 "NKD....." */ + 0xFF,0xFF,0x14,0x00,0x00,0x4C,0x4E,0x4B, /* 00000380 ".....LNK" */ + 0x42,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000388 "B......." */ + 0x14,0x00,0x01,0x4C,0x4E,0x4B,0x43,0x00, /* 00000390 "...LNKC." */ + 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x14,0x00, /* 00000398 "........" */ + 0x0A,0x02,0x4C,0x4E,0x4B,0x44,0x00,0x12, /* 000003A0 "..LNKD.." */ + 0x0E,0x04,0x0C,0xFF,0xFF,0x14,0x00,0x0A, /* 000003A8 "........" */ + 0x03,0x4C,0x4E,0x4B,0x41,0x00,0x12,0x0D, /* 000003B0 ".LNKA..." */ + 0x04,0x0C,0xFF,0xFF,0x01,0x00,0x00,0x4C, /* 000003B8 ".......L" */ + 0x4E,0x4B,0x41,0x00,0x12,0x0D,0x04,0x0C, /* 000003C0 "NKA....." */ + 0xFF,0xFF,0x01,0x00,0x01,0x4C,0x4E,0x4B, /* 000003C8 ".....LNK" */ + 0x42,0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF, /* 000003D0 "B......." */ + 0x01,0x00,0x0A,0x02,0x4C,0x4E,0x4B,0x43, /* 000003D8 "....LNKC" */ + 0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x01, /* 000003E0 "........" */ + 0x00,0x0A,0x03,0x4C,0x4E,0x4B,0x44,0x00, /* 000003E8 "...LNKD." */ + +}; diff --git a/src/mainboard/via/epia-m/fadt.c b/src/mainboard/via/epia-m/fadt.c index 3d9873e7b6..702d556988 100644 --- a/src/mainboard/via/epia-m/fadt.c +++ b/src/mainboard/via/epia-m/fadt.c @@ -15,8 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ diff --git a/src/mainboard/via/epia-m/failover.c b/src/mainboard/via/epia-m/failover.c index bdcb9eaed2..35317fc7b2 100644 --- a/src/mainboard/via/epia-m/failover.c +++ b/src/mainboard/via/epia-m/failover.c @@ -8,6 +8,7 @@ static unsigned long main(unsigned long bist) { +#if 0 /* This is the primary cpu how should I boot? */ if (do_normal_boot()) { goto normal_image; @@ -28,5 +29,6 @@ static unsigned long main(unsigned long bist) : /* clobbers */ ); fallback_image: +#endif return bist; } diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c index 9eb7b3705b..26e5916f01 100644 --- a/src/mainboard/via/epia-m/mainboard.c +++ b/src/mainboard/via/epia-m/mainboard.c @@ -25,7 +25,7 @@ static void vga_fixup(void) { } -static void write_protect_vgabios(void) +void write_protect_vgabios(void) { device_t dev; diff --git a/src/mainboard/via/epia-m/vgabios.c b/src/mainboard/via/epia-m/vgabios.c new file mode 100644 index 0000000000..67620eaa2e --- /dev/null +++ b/src/mainboard/via/epia-m/vgabios.c @@ -0,0 +1,861 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#undef __KERNEL__ +#include <arch/io.h> +//#include <printk.h> +#include <string.h> +#include "vgachip.h" + +/* vgabios.c. Derived from: */ + +/*------------------------------------------------------------ -*- C -*- + * 2 Kernel Monte a.k.a. Linux loading Linux on x86 + * + * Erik Arjan Hendriks <hendriks@lanl.gov> + * + * This version is a derivative of the original two kernel monte + * which is (C) 2000 Scyld. + * + * Copyright (C) 2000 Scyld Computing Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Portions related to the alpha architecture are: + * + * Copyright(C) 2001 University of California. LA-CC Number 01-67. + * This software has been authored by an employee or employees of the + * University of California, operator of the Los Alamos National + * Laboratory under Contract No. W-7405-ENG-36 with the U.S. + * Department of Energy. The U.S. Government has rights to use, + * reproduce, and distribute this software. If the software is + * modified to produce derivative works, such modified software should + * be clearly marked, so as not to confuse it with the version + * available from LANL. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by + * reference to http://www.gnu.org/licenses/gpl.html. + * + * This software is provided by the author(s) "as is" and any express + * or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose + * are disclaimed. In no event shall the author(s) be liable for any + * direct, indirect, incidental, special, exemplary, or consequential + * damages (including, but not limited to, procurement of substitute + * goods or services; loss of use, data, or profits; or business + * interruption) however caused and on any theory of liability, + * whether in contract, strict liability, or tort (including + * negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + * + * $Id: vgabios.c,v 1.5 2004/10/06 17:33:52 rminnich Exp $ + *--------------------------------------------------------------------*/ + +/* Modified to be a self sufficient plug in so that it can be used + without reliance on other parts of core Linuxbios + (C) 2005 Nick.Barker9@btinternet.com + + Used initially for epia-m where there are problems getting the bios + emulator to successfully run this bios. +*/ + +/* Declare a temporary global descriptor table - necessary because the + Core part of the bios no longer sets up any 16 bit segments */ +__asm__ ( + /* pointer to original gdt */ + "gdtarg: \n\t" + ".word gdt_limit \n\t" + ".long gdt \n\t" + + /* compute the table limit */ + "__mygdt_limit = __mygdt_end - __mygdt - 1 \n\t" + + "__mygdtaddr: \n\t" + ".word __mygdt_limit \n\t" + ".long __mygdt \n\t" + + + "__mygdt: \n\t" + /* selgdt 0, unused */ + ".word 0x0000, 0x0000 \n\t" + ".byte 0x00, 0x00, 0x00, 0x00 \n\t" + + /* selgdt 8, unused */ + ".word 0x0000, 0x0000 \n\t" + ".byte 0x00, 0x00, 0x00, 0x00 \n\t" + + /* selgdt 0x10, flat code segment */ + ".word 0xffff, 0x0000 \n\t" + ".byte 0x00, 0x9b, 0xcf, 0x00 \n\t" + + /* selgdt 0x18, flat data segment */ + ".word 0xffff, 0x0000 \n\t" + ".byte 0x00, 0x93, 0xcf, 0x00 \n\t" + + /* selgdt 0x20, unused */ + ".word 0x0000, 0x0000 \n\t" + ".byte 0x00, 0x00, 0x00, 0x00 \n\t" + + /*selgdt 0x28 16-bit 64k code at 0x00000000 */ + ".word 0xffff, 0x0000 \n\t" + ".byte 0, 0x9a, 0, 0 \n\t" + + /* selgdt 0x30 16-bit 64k data at 0x00000000 */ + ".word 0xffff, 0x0000 \n\t" + ".byte 0, 0x92, 0, 0 \n\t" + + "__mygdt_end: \n\t" +); + +/* Declare a pointer to where our idt is going to be i.e. at mem zero */ +__asm__ ( + "__myidt: \n" + " .word 1023 \n" + " .long 0 \n" + " .word 0 \n" +); + +/* The address arguments to this function are PHYSICAL ADDRESSES */ +static void real_mode_switch_call_vga(unsigned long devfn) +{ + __asm__ __volatile__ ( + // paranoia -- does ecx get saved? not sure. This is + // the easiest safe thing to do. + " pushal\n" + /* save the stack */ + " mov %esp, __stack\n" + " jmp 1f\n" + "__stack: .long 0\n" + "1:\n" + /* get devfn into %ecx */ + " movl %esp, %ebp\n" + " movl 8(%ebp), %ecx\n" + /* load 'our' gdt */ + " lgdt %cs:__mygdtaddr \n\t" + + /* This configures CS properly for real mode. */ + " ljmp $0x28, $__rms_16bit\n" + "__rms_16bit: \n" + ".code16 \n" + /* 16 bit code from here on... */ + + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax \n" + " movl %eax, %cr0 \n" + + /* Now really going into real mode */ + " ljmp $0, $__rms_real \n" + "__rms_real: \n" + + // put the stack at the end of page zero. + // that way we can easily share it between real and protected, + // since the 16-bit ESP at segment 0 will work for any case. + /* Setup a stack */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + " movl $0x1000, %eax \n" + " movl %eax, %esp \n" + + /* Load our 16 it idt */ + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + + + /* Dump zeros in the other segregs */ + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov $0x40, %ax \n" + " mov %ax, %ds \n" + " mov %cx, %ax \n" + /* go run the code */ + " .byte 0x9a, 0x03, 0, 0, 0xc0 \n" + + /* if we got here, just about done. + * Need to get back to protected mode */ + "movl %cr0, %eax\n" + "orl $0x0000001, %eax\n" /* PE = 1 */ + "movl %eax, %cr0\n" + + /* Now that we are in protected mode jump to a 32 bit code segment. */ + "data32 ljmp $0x10, $vgarestart\n" + "vgarestart:\n" + ".code32\n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + + /* restore proper gdt and idt */ + " lgdt %cs:gdtarg \n" + " lidt idtarg \n" + ".globl vga_exit\n" + "vga_exit:\n" + " mov __stack, %esp\n" + " popal\n" + ); +} + +__asm__ (".text\n""real_mode_switch_end:\n"); +extern char real_mode_switch_end[]; + +/* call vga bios int 10 function 0x4f14 to enable main console + epia-m does not always autosence the main console so forcing it on is good !! */ + +void vga_enable_console() +{ + __asm__ __volatile__ ( + // paranoia -- does ecx get saved? not sure. This is + // the easiest safe thing to do. + " pushal\n" + /* save the stack */ + " mov %esp, __stack\n" + + /* load 'our' gdt */ + " lgdt %cs:__mygdtaddr \n\t" + + /* This configures CS properly for real mode. */ + " ljmp $0x28, $__vga_ec_16bit\n" + "__vga_ec_16bit: \n" + ".code16 \n" + /* 16 bit code from here on... */ + + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax \n" + " movl %eax, %cr0 \n" + + /* Now really going into real mode */ + " ljmp $0, $__vga_ec_real \n" + "__vga_ec_real: \n" + + // put the stack at the end of page zero. + // that way we can easily share it between real and protected, + // since the 16-bit ESP at segment 0 will work for any case. + /* Setup a stack */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + " movl $0x1000, %eax \n" + " movl %eax, %esp \n" + /* debugging for RGM */ + " mov $0x11, %al \n" + " outb %al, $0x80\n" + + /* Load our 16 it idt */ + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + + /* Dump zeros in the other segregs */ + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + + /* ask bios to enable main console */ + /* set up for int 10 call - values found from X server bios call routines */ + " movw $0x4f14,%ax \n" + " movw $0x8003,%bx \n" + " movw $1, %cx \n" + " movw $0, %dx \n" + " movw $0, %di \n" + " .byte 0xcd, 0x10 \n" + " movb $0x55, %al\noutb %al, $0x80\n" + + /* if we got here, just about done. + * Need to get back to protected mode */ + "movl %cr0, %eax\n" + "orl $0x0000001, %eax\n" /* PE = 1 */ + "movl %eax, %cr0\n" + + /* Now that we are in protected mode jump to a 32 bit code segment. */ + "data32 ljmp $0x10, $vga_ec_restart\n" + "vga_ec_restart:\n" + ".code32\n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + + + /* restore proper gdt and idt */ + " lgdt %cs:gdtarg \n" + " lidt idtarg \n" + ".globl vga__ec_exit\n" + "vga_ec_exit:\n" + " mov __stack, %esp\n" + " popal\n" + ); +} + + +void +do_vgabios(void) +{ + device_t dev; + unsigned long busdevfn; + unsigned int rom = 0; + unsigned char *buf; + unsigned int size = 64*1024; + int i; + + /* clear vga bios data area */ + for (i=0x400; i<0x500; i++) { + *(unsigned char *) i = 0; + } + + dev = dev_find_class(PCI_CLASS_DISPLAY_VGA<<8 , 0); + + if (! dev) { + printk_debug("NO VGA FOUND\n"); + return; + } + printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + + /* declare rom address here - keep any config data out of the way of core LXB stuff */ + + rom = 0xfffc0000; + pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1); + printk_debug("rom base, size: %x\n", rom); + + buf = (unsigned char *) rom; + if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { + memcpy((void *) 0xc0000, buf, size); + + write_protect_vgabios(); // in northbridge + + // check signature again + buf = (unsigned char *) 0xc0000; + if (buf[0]==0x55 && buf[1]==0xAA) { + busdevfn = (dev->bus->secondary << 8) | dev->path.u.pci.devfn; + printk_debug("bus/devfn = %#x\n", busdevfn); + + real_mode_switch_call_vga(busdevfn); + } else + printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + + } else + printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + + pci_write_config32(dev, PCI_ROM_ADDRESS, 0); + +} + + +// we had hoped to avoid this. +// this is a stub IDT only. It's main purpose is to ignore calls +// to the BIOS. +// no longer. Dammit. We have to respond to these. +struct realidt { + unsigned short offset, cs; +}; + +// from a handy writeup that andrey found. + +// handler. +// There are some assumptions we can make here. +// First, the Top Of Stack (TOS) is located on the top of page zero. +// we can share this stack between real and protected mode. +// that simplifies a lot of things ... +// we'll just push all the registers on the stack as longwords, +// and pop to protected mode. +// second, since this only ever runs as part of linuxbios, +// we know all the segment register values -- so we don't save any. +// keep the handler that calls things small. It can do a call to +// more complex code in linuxbios itself. This helps a lot as we don't +// have to do address fixup in this little stub, and calls are absolute +// so the handler is relocatable. +void handler(void) { + __asm__ __volatile__ ( + ".code16\n" + "idthandle:\n" + " pushal\n" + " movb $0, %al\n" + " ljmp $0, $callbiosint16\n" + "end_idthandle:\n" + ".code32\n" + ); + +} + +void debughandler(void) { + __asm__ __volatile__ ( + ".code16\n" + "debughandle:\n" + " pushw %cx \n" + " movw $250, %cx \n" + "dbh1: \n" + " loop dbh1 \n" + " popw %cx \n" + " iret \n" + "end_debughandle:\n" + ".code32\n" + ); + +} + +// Calling conventions. The first C function is called with this stuff +// on the stack. They look like value parameters, but note that if you +// modify them they will go back to the INTx function modified. +// the C function will call the biosint function with these as +// REFERENCE parameters. In this way, we can easily get +// returns back to the INTx caller (i.e. vgabios) +void callbiosint(void) { + __asm__ __volatile__ ( + ".code16\n" + "callbiosint16:\n" + " push %ds \n" + " push %es \n" + " push %fs \n" + " push %gs \n" + // clean up the int #. To save space we put it in the lower + // byte. But the top 24 bits are junk. + "andl $0xff, %eax\n" + // this push does two things: + // - put the INT # on the stack as a parameter + // - provides us with a temp for the %cr0 mods. + "pushl %eax\n" + "movl %cr0, %eax\n" + //"andl $0x7FFAFFD1, %eax\n" /* PG,AM,WP,NE,TS,EM,MP = 0 */ + //"orl $0x60000001, %eax\n" /* CD, NW, PE = 1 */ + "orl $0x00000001, %eax\n" /* PE = 1 */ + "movl %eax, %cr0\n" + /* Now that we are in protected mode jump to a 32 bit code segment. */ + "data32 ljmp $0x10, $biosprotect\n" + "biosprotect:\n" + ".code32\n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + " lidt idtarg \n" + " call biosint \n" + // back to real mode ... + " ljmp $0x28, $__rms_16bit2\n" + "__rms_16bit2: \n" + ".code16 \n" /* 16 bit code from here on... */ + + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax \n" + " movl %eax, %cr0 \n" + + /* Now really going into real mode */ + " ljmp $0, $__rms_real2 \n" + "__rms_real2: \n" + + /* Setup a stack */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + /* ebugging for RGM */ + " mov $0x11, %al \n" + " outb %al, $0x80\n" + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov $0x40, %ax \n" + " mov %ax, %ds \n" + // pop the INT # that you pushed earlier + " popl %eax\n" + " pop %gs \n" + " pop %fs \n" + " pop %es \n" + " pop %ds \n" + " popal\n" + " iret\n" + ".code32\n" + ); +} + + +enum { + PCIBIOS = 0x1a, + MEMSIZE = 0x12 +}; +int +pcibios( + unsigned long *pedi, + unsigned long *pesi, + unsigned long *pebp, + unsigned long *pesp, + unsigned long *pebx, + unsigned long *pedx, + unsigned long *pecx, + unsigned long *peax, + unsigned long *pflags + ); +int +handleint21( + unsigned long *pedi, + unsigned long *pesi, + unsigned long *pebp, + unsigned long *pesp, + unsigned long *pebx, + unsigned long *pedx, + unsigned long *pecx, + unsigned long *peax, + unsigned long *pflags + ); + +extern void vga_exit(void); + +int +biosint( + unsigned long intnumber, + unsigned long gsfs, + unsigned long dses, + unsigned long edi, + unsigned long esi, + unsigned long ebp, + unsigned long esp, + unsigned long ebx, + unsigned long edx, + unsigned long ecx, + unsigned long eax, + unsigned long cs_ip, + unsigned short stackflags + ) { + unsigned long ip; + unsigned long cs; + unsigned long flags; + int ret = -1; + + ip = cs_ip & 0xffff; + cs = cs_ip >> 16; + flags = stackflags; + + printk_debug("biosint: # 0x%lx, eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + intnumber, eax, ebx, ecx, edx); + printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); + printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); + // cases in a good compiler are just as good as your own tables. + switch (intnumber) { + case 0 ... 15: + // These are not BIOS service, but the CPU-generated exceptions + printk_info("biosint: Oops, exception %u\n", intnumber); + if (esp < 0x1000) { + printk_debug("Stack contents: "); + while (esp < 0x1000) { + printk_debug("0x%04x ", *(unsigned short *) esp); + esp += 2; + } + printk_debug("\n"); + } + printk_debug("biosint: Bailing out\n"); + // "longjmp" + vga_exit(); + break; + + case PCIBIOS: + ret = pcibios( &edi, &esi, &ebp, &esp, + &ebx, &edx, &ecx, &eax, &flags); + break; + case MEMSIZE: + // who cares. + eax = 64 * 1024; + ret = 0; + break; + case 0x15: + ret=handleint21( &edi, &esi, &ebp, &esp, + &ebx, &edx, &ecx, &eax, &flags); + break; + default: + printk_info("BIOSINT: Unsupport int #0x%x\n", + intnumber); + break; + } + if (ret) + flags |= 1; // carry flags + else + flags &= ~1; + stackflags = flags; + return ret; +} + + +void setup_realmode_idt(void) +{ + extern unsigned char idthandle, end_idthandle; + extern unsigned char debughandle, end_debughandle; + + int i; + struct realidt *idts = (struct realidt *) 0; + int codesize = &end_idthandle - &idthandle; + unsigned char *intbyte, *codeptr; + + // for each int, we create a customized little handler + // that just pushes %ax, puts the int # in %al, + // then calls the common interrupt handler. + // this necessitated because intel didn't know much about + // architecture when they did the 8086 (it shows) + // (hmm do they know anymore even now :-) + // obviously you can see I don't really care about memory + // efficiency. If I did I would probe back through the stack + // and get it that way. But that's really disgusting. + for (i = 0; i < 256; i++) { + idts[i].cs = 0; + codeptr = (char*) 4096 + i * codesize; + idts[i].offset = (unsigned) codeptr; + memcpy(codeptr, &idthandle, codesize); + intbyte = codeptr + 3; + *intbyte = i; + } + + // fixed entry points + + // VGA BIOSes tend to hardcode f000:f065 as the previous handler of + // int10. + // calling convention here is the same as INTs, we can reuse + // the int entry code. + codeptr = (char*) 0xff065; + memcpy(codeptr, &idthandle, codesize); + intbyte = codeptr + 3; + *intbyte = 0x42; /* int42 is the relocated int10 */ + + /* debug handler - useful to set a programmable delay between instructions if the TF bit is set upon + call to real mode */ + idts[1].cs = 0; + idts[1].offset = 16384; + memcpy(16384, &debughandle, &end_debughandle - &debughandle); + + +} + + + +enum { + CHECK = 0xb001, + FINDDEV = 0xb102, + READCONFBYTE = 0xb108, + READCONFWORD = 0xb109, + READCONFDWORD = 0xb10a, + WRITECONFBYTE = 0xb10b, + WRITECONFWORD = 0xb10c, + WRITECONFDWORD = 0xb10d +}; + +// errors go in AH. Just set these up so that word assigns +// will work. KISS. +enum { + PCIBIOS_NODEV = 0x8600, + PCIBIOS_BADREG = 0x8700 +}; + +int +pcibios( + unsigned long *pedi, + unsigned long *pesi, + unsigned long *pebp, + unsigned long *pesp, + unsigned long *pebx, + unsigned long *pedx, + unsigned long *pecx, + unsigned long *peax, + unsigned long *pflags + ) { + unsigned long edi = *pedi; + unsigned long esi = *pesi; + unsigned long ebp = *pebp; + unsigned long esp = *pesp; + unsigned long ebx = *pebx; + unsigned long edx = *pedx; + unsigned long ecx = *pecx; + unsigned long eax = *peax; + unsigned long flags = *pflags; + unsigned short func = (unsigned short) eax; + int retval = 0; + unsigned short devid, vendorid, devfn; + short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */ + unsigned char bus; + device_t dev; + + switch(func) { + case CHECK: + *pedx = 0x4350; + *pecx = 0x2049; + retval = 0; + break; + case FINDDEV: + { + devid = *pecx; + vendorid = *pedx; + devindex = *pesi; + dev = 0; + while ((dev = dev_find_device(vendorid, devid, dev))) { + if (devindex <= 0) + break; + devindex--; + } + if (dev) { + unsigned short busdevfn; + *peax = 0; + // busnum is an unsigned char; + // devfn is an int, so we mask it off. + busdevfn = (dev->bus->secondary << 8) + | (dev->path.u.pci.devfn & 0xff); + printk_debug("0x%x: return 0x%x\n", func, busdevfn); + *pebx = busdevfn; + retval = 0; + } else { + *peax = PCIBIOS_NODEV; + retval = -1; + } + } + break; + case READCONFDWORD: + case READCONFWORD: + case READCONFBYTE: + case WRITECONFDWORD: + case WRITECONFWORD: + case WRITECONFBYTE: + { + unsigned long dword; + unsigned short word; + unsigned char byte; + unsigned char reg; + + devfn = *pebx & 0xff; + bus = *pebx >> 8; + reg = *pedi; + dev = dev_find_slot(bus, devfn); + if (! dev) { + printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); + // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! + *peax = PCIBIOS_BADREG; + retval = -1; + } + switch(func) { + case READCONFBYTE: + byte = pci_read_config8(dev, reg); + *pecx = byte; + break; + case READCONFWORD: + word = pci_read_config16(dev, reg); + *pecx = word; + break; + case READCONFDWORD: + dword = pci_read_config32(dev, reg); + *pecx = dword; + break; + case WRITECONFBYTE: + byte = *pecx; + pci_write_config8(dev, reg, byte); + break; + case WRITECONFWORD: + word = *pecx; + pci_write_config16(dev, reg, word); + break; + case WRITECONFDWORD: + dword = *pecx; + pci_write_config32(dev, reg, dword); + break; + } + + if (retval) + retval = PCIBIOS_BADREG; + printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); + *peax = 0; + retval = 0; + } + break; + default: + printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + break; + } + + return retval; +} + + + +int handleint21( unsigned long *edi, unsigned long *esi, unsigned long *ebp, + unsigned long *esp, unsigned long *ebx, unsigned long *edx, + unsigned long *ecx, unsigned long *eax, unsigned long *flags) +{ +int res=-1; + switch(*eax&0xffff) + { + case 0x5f19: + break; + case 0x5f18: + *eax=0x5f; + *ebx=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory + *ecx=0x060; + res=0; + break; + case 0x5f00: + *eax = 0x8600; + break; + case 0x5f01: + *eax = 0x5f; + *ecx = (*ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768 + res = 0; + break; + case 0x5f02: + *eax=0x5f; + *ebx= (*ebx & 0xffff0000) | 2; + *ecx= (*ecx & 0xffff0000) | 0x401; // PAL + crt only + *edx= (*edx & 0xffff0000) | 0; // TV Layout - default + res=0; + break; + case 0x5f0f: + *eax=0x860f; + break; + } + return res; +} diff --git a/src/mainboard/via/epia-m/vgachip.h b/src/mainboard/via/epia-m/vgachip.h new file mode 100644 index 0000000000..d43788cd66 --- /dev/null +++ b/src/mainboard/via/epia-m/vgachip.h @@ -0,0 +1,10 @@ +#ifndef _PC80_VGABIOS +#define _PC80_VGABIOS + +extern struct chip_control pc80_vgabios_control; + +struct pc80_vgabios_config { + int nothing; +}; + +#endif /* _PC80_VGABIOS */ diff --git a/src/northbridge/via/vt8623/northbridge.c b/src/northbridge/via/vt8623/northbridge.c index bfaaeac30f..7143c358da 100644 --- a/src/northbridge/via/vt8623/northbridge.c +++ b/src/northbridge/via/vt8623/northbridge.c @@ -10,6 +10,7 @@ #include <bitops.h> #include <cpu/cpu.h> #include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> #include "chip.h" #include "northbridge.h" @@ -19,6 +20,18 @@ * slower than normal, ethernet drops packets). * Apparently these registers govern some sort of bus master behavior. */ +static void dump_dev(device_t dev) +{ + int i,j; + + for(i = 0; i < 256; i += 16) { + printk_debug("0x%x: ", i); + for(j = 0; j < 16; j++) { + printk_debug("%02x ", pci_read_config8(dev, i+j)); + } + printk_debug("\n"); + } +} static void northbridge_init(device_t dev) { device_t fb_dev; @@ -44,21 +57,25 @@ static void northbridge_init(device_t dev) /* Fixup GART and framebuffer addresses properly. * First setup frame buffer properly. */ - fb = pci_read_config32(dev, 0x10); /* Base addres of framebuffer */ + //fb = pci_read_config32(dev, 0x10); /* Base addres of framebuffer */ + fb = 0xd0000000; printk_debug("Frame buffer at %8x\n",fb); c = pci_read_config8(dev, 0xe1) & 0xf0; /* size of vga */ c |= fb>>28; /* upper nibble of frame buffer address */ + c = 0xdd; pci_write_config8(dev, 0xe1, c); - c = (fb>>20) | 1; /* enable framebuffer */ + c = 0x81; /* enable framebuffer */ pci_write_config8(dev, 0xe0, c); pci_write_config8(dev, 0xe2, 0x42); /* 'cos award does */ } + //dump_dev(dev); } +static void nullfunc(){} static struct device_operations northbridge_operations = { - .read_resources = pci_dev_read_resources, + .read_resources = nullfunc, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = northbridge_init @@ -80,10 +97,11 @@ static void agp_init(device_t dev) pci_write_config8(dev, 0x43, 0x44); pci_write_config8(dev, 0x44, 0x34); pci_write_config8(dev, 0x83, 0x02); + //dump_dev(dev); } static struct device_operations agp_operations = { - .read_resources = pci_bus_read_resources, + .read_resources = nullfunc, .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .init = agp_init, @@ -100,12 +118,64 @@ static struct pci_driver agp_driver __pci_driver = { static void vga_init(device_t dev) { // unsigned long fb; + msr_t clocks1,clocks2,instructions,setup; printk_debug("VGA random fixup ...\n"); pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x0d, 0x20); + pci_write_config32(dev,0x10,0xd8000008); + pci_write_config32(dev,0x14,0xdc000000); + + //dump_dev(dev); + + // set up performnce counters for debugging vga init sequence + //setup.lo = 0x1c0; // count instructions + //wrmsr(0x187,setup); + //instructions.hi = 0; + //instructions.lo = 0; + //wrmsr(0xc2,instructions); + //clocks1 = rdmsr(0x10); + + +#if 0 + /* code to make vga init go through the emulator - as of yet this does not workfor the epia-m */ + dev->on_mainboard=1; + dev->rom_address = (void *)0xfffc0000; + + pci_dev_init(dev); + + call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); + + //clocks2 = rdmsr(0x10); + //instructions = rdmsr(0xc2); + + printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); + printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); + printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo); + +#else + + /* code to make vga init run in real mode - does work but against the current Linuxbios philosophy */ + printk_debug("INSTALL REAL-MODE IDT\n"); + setup_realmode_idt(); + printk_debug("DO THE VGA BIOS\n"); + do_vgabios(); + + //clocks2 = rdmsr(0x10); + //instructions = rdmsr(0xc2); - /* Set the vga mtrrs - disable for the moment */ + //printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); + //printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); + //printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo); + + vga_enable_console(); + +#endif + + + pci_write_config32(dev,0x30,0); + + /* Set the vga mtrrs - disable for the moment as the add_var_mtrr function has vapourised */ #if 0 add_var_mtrr( 0xd0000000 >> 10, 0x08000000>>10, MTRR_TYPE_WRCOMB); fb = pci_read_config32(dev,0x10); // get the fb address @@ -113,8 +183,17 @@ static void vga_init(device_t dev) #endif } +static void vga_read_resources(device_t dev) +{ + + dev->rom_address = (void *)0xfffc0000; + dev->on_mainboard=1; + pci_dev_read_resources(dev); + +} + static struct device_operations vga_operations = { - .read_resources = pci_dev_read_resources, + .read_resources = vga_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = vga_init, diff --git a/src/northbridge/via/vt8623/raminit.c b/src/northbridge/via/vt8623/raminit.c index 7371e09e57..750193231a 100644 --- a/src/northbridge/via/vt8623/raminit.c +++ b/src/northbridge/via/vt8623/raminit.c @@ -1,91 +1,50 @@ -#include <cpu/x86/mtrr.h> -#include "raminit.h" - -/* -This software and ancillary information (herein called SOFTWARE ) -called LinuxBIOS is made available under the terms described -here. The SOFTWARE has been approved for release with associated -LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has -been authored by an employee or employees of the University of -California, operator of the Los Alamos National Laboratory under -Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The -U.S. Government has rights to use, reproduce, and distribute this -SOFTWARE. The public may copy, distribute, prepare derivative works -and publicly display this SOFTWARE without charge, provided that this -Notice and any statement of authorship are reproduced on all copies. -Neither the Government nor the University makes any warranty, express -or implied, or assumes any liability or responsibility for the use of -this SOFTWARE. If SOFTWARE is modified to produce derivative works, -such modified SOFTWARE should be clearly marked, so as not to confuse -it with the version available from LANL. - */ -/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL - * rminnich@lanl.gov - */ /* - * 11/26/02 - kevinh@ispiri.com - The existing comments implied that - * this didn't work yet. Therefore, I've updated it so that it works - * correctly - at least on my VIA epia motherboard. 64MB DIMM in slot 0. - */ - -/* Added automatic detection of first equipped bank and its MA mapping type. - * (Rest of configuration is done in C) - * 5/19/03 by SONE Takeshi <ts1@tsn.or.jp> + * (C) Copyright 2005 Nick Barker <nick.barker9@btinternet.com> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ -/* converted to C 9/2003 Ron Minnich */ - -/* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB - * frequency is 133MHz. If your CPU runs at another bus speed, you - * might need to change some of register values. - */ -#ifndef DIMM_PC133 -#define DIMM_PC133 0 -#endif - -// Set to 1 if your DIMMs are CL=2 -#ifndef DIMM_CL2 -#define DIMM_CL2 0 -#endif +/* + Automatically detect and set up ddr dram on the CLE266 chipset. + Assumes DDR memory, though chipset also supports SDRAM + Assumes at least 266Mhz memory as no attempt is made to clock + the chipset down if slower memory is installed. + So far tested on: + 256 Mb 266Mhz 1 Bank (i.e. single sided) + 256 Mb 266Mhz 2 Bank (i.e. double sided) + 512 Mb 266Mhz 2 Bank (i.e. double sided) +*/ +/* ported and enhanced from assembler level code in Linuxbios v1 */ +#include <cpu/x86/mtrr.h> +#include "raminit.h" -void dimm_read(unsigned long x) +void dimm_read(unsigned long bank,unsigned long x) { - unsigned long eax; + //unsigned long eax; volatile unsigned long y; - eax = x; - y = * (volatile unsigned long *) eax; - -} + //eax = x; + y = * (volatile unsigned long *) (x+ bank) ; -void dimms_write(int x) -{ - uint8_t c; - unsigned long eax = x; - for(c = 0; c < 6; c++) { - *(volatile unsigned long *) eax = 0; - eax += 0x10000000; - } } - -#ifdef DEBUG_SETNORTHB -void setnorthb(device_t north, uint8_t reg, uint8_t val) -{ - print_debug("setnorth: reg "); - print_debug_hex8(reg); - print_debug(" to "); - print_debug_hex8(val); - print_debug("\r\n"); - pci_write_config8(north, reg, val); -} -#else -#define setnorthb pci_write_config8 -#endif - void dumpnorth(device_t north) { @@ -100,246 +59,527 @@ dumpnorth(device_t north) print_debug("\r\n"); } } +void print_val(char *str, int val) +{ + print_debug(str); + print_debug_hex8(val); +} -static void sdram_set_registers(const struct mem_controller *ctrl) +static void ddr_ram_setup(const struct mem_controller *ctrl) { device_t north = (device_t) 0; - uint8_t c, r; + uint8_t b, c, bank; + uint16_t i,j; + unsigned long bank_address; print_err("vt8623 init starting\r\n"); north = pci_locate_device(PCI_ID(0x1106, 0x3123), 0); north = 0; - print_debug_hex32(north); - print_debug(" is the north\r\n"); - print_debug_hex16(pci_read_config16(north, 0)); - print_debug(" "); - print_debug_hex16(pci_read_config16(north, 2)); - print_debug("\r\n"); - /* All we are doing now is setting initial known-good values that will - * be revised later as we read SPD - */ pci_write_config8(north,0x75,0x08); - /* since we only support epia-m at the moment, only ddr is supported */ /* setup cpu */ pci_write_config8(north,0x50,0xc8); pci_write_config8(north,0x51,0xde); pci_write_config8(north,0x52,0xcf); pci_write_config8(north,0x53,0x88); - pci_write_config8(north,0x55,0x07); + pci_write_config8(north,0x55,0x04); - /* DRAM MA Map Type */ - pci_write_config8(north,0x58,0xe0); +/* + DRAM MA Map Type Device 0 Offset 58 - /* DRAM bank 0 - 3 size = 512M */ - pci_write_config8(north,0x5a,0x10); - pci_write_config8(north,0x5b,0x10); - pci_write_config8(north,0x5c,0x10); - pci_write_config8(north,0x5d,0x10); + Determine memory addressing based on the module's memory technology and + arrangement. See Table 4-9 of Intel's 82443GX datasheet for details. - /* set DRAM timing for all banks */ - pci_write_config8(north,0x64,0xe6); + Bank 1/0 MA map type 58[7-5] + Bank 1/0 command rate 58[4] + Bank 3/2 MA map type 58[3-1] + Bank 3/2 command rate 58[0] - /* set DRAM type to DDR */ - pci_write_config8(north,0x60,0x02); + Read SPD byte 17, Number of banks on SDRAM device. +*/ + c = 0; + b = smbus_read_byte(0xa0,17); + print_val("Detecting Memory\r\nNumber of Banks ",b); - /* DRAM arbitration timer */ - pci_write_config8(north,0x65,0x32); - pci_write_config8(north,0x66,0x01); - pci_write_config8(north,0x68,0x59); + if( b != 2 ){ // not 16 Mb type + +/* + Read SPD byte 3, Number of row addresses. +*/ + b = smbus_read_byte(0xa0,3); + print_val("\r\nNumber of Rows ",b); + if( b >= 0x0d ){ // not 64/128Mb (rows <=12) +/* + Read SPD byte 13, Primary DRAM width. +*/ + b = smbus_read_byte(0xa0,13); + print_val("\r\nPriamry DRAM width",b); + if( b != 4 ) // mot 64/128Mb (x4) + c = 0x80; // 256Mb + } - /* DRAM Frequency */ - pci_write_config8(north,0x54,0xe0); - pci_write_config8(north,0x69,0x2d); +/* + 64/128Mb chip - /* Enable CKE */ - pci_write_config8(north,0x6b,0x10); + Read SPD byte 4, Number of column addresses. +*/ + b = smbus_read_byte(0xa0,4); + print_val("\r\nNo Columns ",b); + if( b == 10 || b == 11 ) c |= 0x60; // 10/11 bit col addr + if( b == 9 ) c |= 0x40; // 9 bit col addr + if( b == 8 ) c |= 0x20; // 8 bit col addr + + } + print_val("\r\nMA type ",c); + pci_write_config8(north,0x58,c); + +/* + DRAM bank size. See 4.3.1 pg 35 + + 5a->5d set to end address for each bank. 1 bit == 16MB + 5a = bank 0 + 5b = bank 0 + b1 + 5c = bank 0 + b1 + b2 + 5d = bank 0 + b1 + b2 + b3 +*/ + +// Read SPD byte 31 Module bank density + c = 0; + b = smbus_read_byte(0xa0,31); + if( b & 0x02 ) c = 0x80; // 2GB + else if( b & 0x01) c = 0x40; // 1GB + else if( b & 0x80) c = 0x20; // 512Mb + else if( b & 0x40) c = 0x10; // 256Mb + else if( b & 0x20) c = 0x08; // 128Mb + else if( b & 0x10) c = 0x04; // 64Mb + else if( b & 0x08) c = 0x02; // 32Mb + else if( b & 0x04) c = 0x01; // 16Mb / 4Gb + else c = 0x01; // Error, use default + + + print_val("\r\nBank 0 (*16 Mb) ",c); + + // set bank zero size + pci_write_config8(north,0x5a,c); + // SPD byte 5 # of physical banks + b = smbus_read_byte(0xa0,5); + + print_val("\r\nNo Physical Banks ",b); + if( b == 2) + c <<=1; + + print_val("\r\nTotal Memory (*16 Mb) ",c); + // set banks 1,2,3 + pci_write_config8(north,0x5b,c); + pci_write_config8(north,0x5c,c); + pci_write_config8(north,0x5d,c); + + + /* Read SPD byte 18 CAS Latency */ + b = smbus_read_byte(0xa0,18); + print_debug("\r\nCAS Supported "); + if(b & 0x04) + print_debug("2 "); + if(b & 0x08) + print_debug("2.5 "); + if(b & 0x10) + print_debug("3"); + print_val("\r\nCycle time at CL X (nS)",smbus_read_byte(0xa0,9)); + print_val("\r\nCycle time at CL X-0.5 (nS)",smbus_read_byte(0xa0,23)); + print_val("\r\nCycle time at CL X-1 (nS)",smbus_read_byte(0xa0,25)); - /* Disable DRAM refresh */ - pci_write_config8(north,0x6a,0x0); - /* set heavy drive */ - pci_write_config8(north,0x6d,0x44); + if( b & 0x10 ){ // DDR offering optional CAS 3 + print_debug("\r\nStarting at CAS 3"); + c = 0x30; + /* see if we can better it */ + if( b & 0x08 ){ // DDR mandatory CAS 2.5 + if( smbus_read_byte(0xa0,23) <= 0x75 ){ // we can manage 133Mhz at CAS 2.5 + print_debug("\r\nWe can do CAS 2.5"); + c = 0x20; + } + } + if( b & 0x04 ){ // DDR mandatory CAS 2 + if( smbus_read_byte(0xa0,25) <= 0x75 ){ // we can manage 133Mhz at CAS 2 + print_debug("\r\nWe can do CAS 2"); + c = 0x10; + } + } + }else{ // no optional CAS values just 2 & 2.5 + print_debug("\r\nStarting at CAS 2.5"); + c = 0x20; // assume CAS 2.5 + if( b & 0x04){ // Should always happen + if( smbus_read_byte(0xa0,23) <= 0x75){ // we can manage 133Mhz at CAS 2 + print_debug("\r\nWe can do CAS 2"); + c = 0x10; + } + } + } - pci_write_config8(north,0x61,0xff); +/* + DRAM Timing Device 0 Offset 64 + Row pre-charge 64[7] + RAS Pulse width 64[6] + CAS Latency 64[5,4] -} + SDR DDR + 00 1T - + 01 2T 2T + 10 3T 2.5T + 11 - 3T -/* slot is the dram slot. Return size of side0 in lower 16-bit, - * side1 in upper 16-bit, in units of 8MB */ -static unsigned long -spd_module_size(unsigned char slot) -{ - /* for all the DRAMS, see if they are there and get the size of each - * module. This is just a very early first cut at sizing. - */ - /* we may run out of registers ... */ - unsigned int banks, rows, cols, reg; - unsigned int value = 0; - unsigned int module = ((0x50 + slot) << 1) + 1; - /* is the module there? if byte 2 is not 4, then we'll assume it - * is useless. - */ - print_info("Slot "); - print_info_hex8(slot); - if (smbus_read_byte(module, 2) != 4) { - print_info(" is empty\r\n"); - return 0; - } - print_info(" is SDRAM "); - - banks = smbus_read_byte(module, 17); - /* we're going to assume symmetric banks. Sorry. */ - cols = smbus_read_byte(module, 4) & 0xf; - rows = smbus_read_byte(module, 3) & 0xf; - /* grand total. You have rows+cols addressing, * times of banks, times - * width of data in bytes */ - /* Width is assumed to be 64 bits == 8 bytes */ - value = (1 << (cols + rows)) * banks * 8; - print_info_hex32(value); - print_info(" bytes "); - /* Return in 8MB units */ - value >>= 23; - - /* We should have single or double side */ - if (smbus_read_byte(module, 5) == 2) { - print_info("x2"); - value = (value << 16) | value; - } - print_info("\r\n"); - return value; + RAS/CAS delay 64[2] + Bank Interleave 64[1,0] -} -static int -spd_num_chips(unsigned char slot) -{ - unsigned int module = ((0x50 + slot) << 1) + 1; - unsigned int width; + Determine row pre-charge time (tRP) - width = smbus_read_byte(module, 13); - if (width == 0) - width = 8; - return 64 / width; -} + T nS SPD*4 SPD + 1T 7.5 0x1e + 2T 15 0x3c + 3T 22.5 0x5a + 4T 30 0x1e + 5T 37.5 0x25 .5? + 6T 45 0x2d -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ -#define T133 7 - unsigned char Trp = 1, Tras = 1, casl = 2, val; - unsigned char timing = 0xe4; - /* read Trp */ - val = smbus_read_byte(0xa0, 27); - if (val < 2*T133) - Trp = 1; - val = smbus_read_byte(0xa0, 30); - if (val < 5*T133) - Tras = 0; - val = smbus_read_byte(0xa0, 18); - if (val < 8) - casl = 1; - if (val < 4) - casl = 0; - - val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4; - - print_debug_hex8(val); print_debug(" is the computed timing\r\n"); - /* don't set it. Experience shows that this screwy chipset should just - * be run with the most conservative timing. - * pci_write_config8(0, 0x64, val); - */ -} -static void set_ma_mapping(device_t north, int slot, int type) -{ - unsigned char reg, val; - int shift; - - reg = 0x58 + slot/2; - if (slot%2 >= 1) - shift = 0; - else - shift = 4; - - val = pci_read_config8(north, reg); - val &= ~(0xf << shift); - val |= type << shift; - pci_write_config8(north, reg, val); -} + Read SPD byte 27, min row pre-charge time. +*/ + b = smbus_read_byte(0xa0,27); + print_val("\r\ntRP ",b); + if( b > 0x3c ) // set tRP = 3T + c |= 0x80; -static void sdram_enable(int controllers, const struct mem_controller *ctrl) -{ - unsigned char i; - static const uint8_t ramregs[] = { - 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57 - }; - device_t north = 0; - uint32_t size, base, slot, ma; - - /* NOP command enable */ - pci_write_config8(north,0x6b,0x01); +/* + Determine RAS to CAS delay (tRCD) + + Read SPD byte 29, min row pre-charge time. +*/ + + b = smbus_read_byte(0xa0,29); + print_val("\r\ntRCD ",b); + if( b > 0x3c ) // set tRCD = 3T + c |= 0x04; + +/* + Determine RAS pulse width (tRAS) + + + Read SPD byte 30, device min active to pre-charge time. +*/ + + b = smbus_read_byte(0xa0,30); + print_val("\r\ntRAS ",b); + if( b > 0x25 ) // set tRAS = 6T + c |= 0x40; + + +/* + Determine bank interleave + + Read SPD byte 17, Number of banks on SDRAM device. +*/ + b = smbus_read_byte(0xa0,17); + if( b == 4) c |= 0x02; + else if (b == 2) c |= 0x01; + + + /* set DRAM timing for all banks */ + pci_write_config8(north,0x64,c); + + /* set DRAM type to DDR */ + pci_write_config8(north,0x60,0x02); + + + /* DRAM arbitration timer */ + pci_write_config8(north,0x65,0x32); + + +/* + CPU Frequency Device 0 Offset 54 + + CPU Frequency 54[7,6] bootstraps at 0xc0 (133Mhz) + DRAM burst length = 8 54[5] +*/ + pci_write_config8(north,0x54,0xe0); + - /* read a double word from any addree of the dimm */ - dimm_read(0x1f000); +/* + DRAM Clock Device 0 Offset 69 + + DRAM/CPU speed 69[7,6] (leave at default 00 == CPU) + Controller que > 2 69[5] + Controller que != 4 69[4] + DRAM 8k page size 69[3] + DRAM 4k page size 69[2] + Multiple page mode 69[0] +*/ + + pci_write_config8(north,0x69,0x2d); + + /* Delay >= 100ns after DRAM Frequency adjust, See 4.1.1.3 pg 15 */ + udelay(200); + + + /* Enable CKE */ + pci_write_config8(north,0x6b,0x10); udelay(200); - /* All bank precharge Command Enable */ - pci_write_config8(north,0x6b,0x02); - dimm_read(0x1f000); + /* Disable DRAM refresh */ + pci_write_config8(north,0x6a,0x0); + + + /* Set drive for 1 bank DDR (Table 4.4.2, pg 40) */ + pci_write_config8(north,0x6d,0x044); + pci_write_config8(north,0x67,0x3a); + + b = smbus_read_byte(0xa0,5); // SPD byte 5 # of physical banks + if( b > 1) { + // Increase drive control when there is more than 1 physical bank + pci_write_config8(north,0x6c,0x84); // Drive control: MA, DQS, MD/CKE + pci_write_config8(north,0x6d,0x55); // DC: Early clock select, DQM, CS#, MD + } + /* place frame buffer on last bank */ + if( !b) b++; // make sure at least 1 bank reported + pci_write_config8(north,0xe3,b-1); + + for( bank = 0 , bank_address=0; bank < b ; bank++){ +/* + DDR init described in Via BIOS Porting Guide. Pg 28 (4.2.3.1) +*/ + + + /* NOP command enable */ + pci_write_config8(north,0x6b,0x11); + + /* read a double word from any address of the dimm */ + dimm_read(bank_address,0x1f000); + //udelay(200); + + /* All bank precharge Command Enable */ + pci_write_config8(north,0x6b,0x12); + dimm_read(bank_address,0x1f000); + + + /* MSR Enable */ + pci_write_config8(north,0x6b,0x13); + dimm_read(bank_address,0x2000); + udelay(1); + dimm_read(bank_address,0x800); + udelay(1); + + /* All banks precharge Command Enable */ + pci_write_config8(north,0x6b,0x12); + dimm_read(bank_address,0x1f200); + + /* CBR Cycle Enable */ + pci_write_config8(north,0x6b,0x14); + + /* Read 8 times */ + dimm_read(bank_address,0x1f300); + udelay(100); + dimm_read(bank_address,0x1f400); + udelay(100); + dimm_read(bank_address,0x1f500); + udelay(100); + dimm_read(bank_address,0x1f600); + udelay(100); + dimm_read(bank_address,0x1f700); + udelay(100); + dimm_read(bank_address,0x1f800); + udelay(100); + dimm_read(bank_address,0x1f900); + udelay(100); + dimm_read(bank_address,0x1fa00); + udelay(100); + + /* MSR Enable */ + pci_write_config8(north,0x6b,0x13); + +/* + Mode Register Definition + with adjustement so that address calculation is correct - 64 bit technology, therefore + a0-a2 refer to byte within a 64 bit long word, and a3 is the first address line presented + to DIMM as a row or column address. + + MR[9-7] CAS Latency + MR[6] Burst Type 0 = sequential, 1 = interleaved + MR[5-3] burst length 001 = 2, 010 = 4, 011 = 8, others reserved + MR[0-2] dont care + + CAS Latency + 000 reserved + 001 reserved + 010 2 + 011 3 + 100 reserved + 101 1.5 + 110 2.5 + 111 reserved + + CAS 2 0101011000 = 0x158 + CAS 2.5 1101011000 = 0x358 + CAS 3 0111011000 = 0x1d8 + +*/ + c = pci_read_config8(north,0x64); + if( (c & 0x30) == 0x10 ) + dimm_read(bank_address,0x150); + else if((c & 0x30) == 0x20 ) + dimm_read(bank_address,0x350); + else + dimm_read(bank_address,0x1d0); + + //dimm_read(bank_address,0x350); + + /* Normal SDRAM Mode */ + pci_write_config8(north,0x6b,0x58 ); + + + bank_address = pci_read_config8(north,0x5a+bank) * 0x1000000; + } // end of for each bank + + /* Adjust DQS (data strobe output delay). See 4.2.3.2 pg 29 */ + pci_write_config8(north,0x66,0x41); + + /* determine low bond */ + if( b == 2) + bank_address = pci_read_config8(north,0x5a) * 0x1000000; + else + bank_address = 0; + + for(i = 0 ; i < 0x0ff; i++){ + c = i ^ (i>>1); // convert to gray code + pci_write_config8(north,0x68,c); + // clear + *(volatile unsigned long*)(0x4000) = 0; + *(volatile unsigned long*)(0x4100+bank_address) = 0; + *(volatile unsigned long*)(0x4200) = 0; + *(volatile unsigned long*)(0x4300+bank_address) = 0; + *(volatile unsigned long*)(0x4400) = 0; + *(volatile unsigned long*)(0x4500+bank_address) = 0; + + + // fill + *(volatile unsigned long*)(0x4000) = 0x12345678; + *(volatile unsigned long*)(0x4100+bank_address) = 0x81234567; + *(volatile unsigned long*)(0x4200) = 0x78123456; + *(volatile unsigned long*)(0x4300+bank_address) = 0x67812345; + *(volatile unsigned long*)(0x4400) = 0x56781234; + *(volatile unsigned long*)(0x4500+bank_address) = 0x45678123; + + // verify + if( *(volatile unsigned long*)(0x4000) != 0x12345678) + continue; + + if( *(volatile unsigned long*)(0x4100+bank_address) != 0x81234567) + continue; + + if( *(volatile unsigned long*)(0x4200) != 0x78123456) + continue; + + if( *(volatile unsigned long*)(0x4300+bank_address) != 0x67812345) + continue; + + if( *(volatile unsigned long*)(0x4400) != 0x56781234) + continue; + + if( *(volatile unsigned long*)(0x4500+bank_address) != 0x45678123) + continue; + + // if everything verified then found low bond + break; + + } + print_val("\r\nLow Bond ",i); + if( i < 0xff ){ + c = i++; + for( ; i <0xff ; i++){ + pci_write_config8(north,0x68,i ^ (i>>1) ); + + // clear + *(volatile unsigned long*)(0x8000) = 0; + *(volatile unsigned long*)(0x8100+bank_address) = 0; + *(volatile unsigned long*)(0x8200) = 0x0; + *(volatile unsigned long*)(0x8300+bank_address) = 0; + *(volatile unsigned long*)(0x8400) = 0x0; + *(volatile unsigned long*)(0x8500+bank_address) = 0; + + // fill + *(volatile unsigned long*)(0x8000) = 0x12345678; + *(volatile unsigned long*)(0x8100+bank_address) = 0x81234567; + *(volatile unsigned long*)(0x8200) = 0x78123456; + *(volatile unsigned long*)(0x8300+bank_address) = 0x67812345; + *(volatile unsigned long*)(0x8400) = 0x56781234; + *(volatile unsigned long*)(0x8500+bank_address) = 0x45678123; + + // verify + if( *(volatile unsigned long*)(0x8000) != 0x12345678) + break; + + if( *(volatile unsigned long*)(0x8100+bank_address) != 0x81234567) + break; + + if( *(volatile unsigned long*)(0x8200) != 0x78123456) + break; + + if( *(volatile unsigned long*)(0x8300+bank_address) != 0x67812345) + break; + + if( *(volatile unsigned long*)(0x8400) != 0x56781234) + break; + + if( *(volatile unsigned long*)(0x8500+bank_address) != 0x45678123) + break; + + } + print_val(" High Bond",i); + c = ((i - c)<<1)/3 +c; + print_val(" Setting DQS delay",c); + c = c ^ (c>>1); // convert to gray code + pci_write_config8(north,0x68,c); + pci_write_config8(north,0x68,0x42); + }else{ + print_debug("Unable to determine low bond - Setting default\r\n"); + pci_write_config8(north,0x68,0x59); + } - /* MSR Enable */ - pci_write_config8(north,0x6b,0x03); - dimm_read(0x2000); - dimm_read(0x800); + pci_write_config8(north,0x66,0x01); + pci_write_config8(north,0x55,0x07); - /* All banks precharge Command Enable */ - pci_write_config8(north,0x6b,0x02); - dimm_read(0x1f200); - /* CBR Cycle Enable */ - pci_write_config8(north,0x6b,0x04); - /* Read 8 times */ - dimm_read(0x1f300); - udelay(100); - dimm_read(0x1f400); - udelay(100); - dimm_read(0x1f500); - udelay(100); - dimm_read(0x1f600); - udelay(100); - dimm_read(0x1f700); - udelay(100); - dimm_read(0x1f800); - udelay(100); - dimm_read(0x1f900); - udelay(100); - dimm_read(0x1fa00); - udelay(100); +/* + DRAM refresh rate Device 0 Offset 6a - /* MSR Enable */ - pci_write_config8(north,0x6b,0x03); + Units of 16 DRAM clock cycles. (See 4.4.1 pg 39) - /* 0x150 if CAS Latency 2 or 0x350 CAS Latency 2.5 */ - dimm_read(0x350); + Rx69 (DRAM freq) Rx58 (chip tech) Rx6a - /* Normal SDRAM Mode */ - pci_write_config8(north,0x6b,0x58 ); + 133Mhz 64/128Mb 0x86 + 133Mhz 256/512Mb 0x43 + 100Mhz 64/128Mb 0x65 + 100Mhz 256/512Mb 0x32 +*/ + b = pci_read_config8(north,0x58); + if( b < 0x80 ) // 256 tech + pci_write_config8(north,0x6a,0x86); + else + pci_write_config8(north,0x6a,0x43); - /* Set the refresh rate */ - pci_write_config8(north,0x6a,0x43); - pci_write_config8(north,0x67,0x22); + pci_write_config8(north,0x61,0xff); + //pci_write_config8(north,0x67,0x22); /* pci */ pci_write_config8(north,0x70,0x82); @@ -351,14 +591,18 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) /* graphics aperture base */ + pci_write_config8(north,0x13,0xd0); - //pci_write_config8(north,0x56,0x10); - //pci_write_config8(north,0x57,0x10); + //pci_write_config8(north,0xe1,0xdf); + //pci_write_config8(north,0xe2,0x42); + pci_write_config8(north,0xe0,0x00); + + pci_write_config8(north,0x84,0x80); + pci_write_config16(north,0x80,0x610f); + pci_write_config32(north,0x88,0x00000002); + - pci_write_config8(north,0xe0,0x80); - pci_write_config8(north,0xe1,0xdf); - pci_write_config8(north,0xe2,0x42); pci_write_config8(north,0xa8,0x04); pci_write_config8(north,0xac,0x2f); @@ -366,4 +610,18 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) print_err("vt8623 done\r\n"); dumpnorth(north); + + print_err("AGP\r\n"); + north = pci_locate_device(PCI_ID(0x1106, 0xb091), 0); + pci_write_config32(north,0x20,0xddf0dc00); + pci_write_config32(north,0x24,0xdbf0d800); + pci_write_config8(north,0x3e,0x0c); + //dumpnorth(north); + + //print_err("VGA\n"); + //north = pci_locate_device(PCI_ID(0x1106, 0x3122), 0); + //pci_write_config32(north,0x10,0xd8000008); + //pci_write_config32(north,0x14,0xdc000000); + //dumpnorth(north); + } diff --git a/src/southbridge/ricoh/rl5c476/chip.h b/src/southbridge/ricoh/rl5c476/chip.h index 5d7a2e3ab6..c4cd9d7997 100644 --- a/src/southbridge/ricoh/rl5c476/chip.h +++ b/src/southbridge/ricoh/rl5c476/chip.h @@ -1,10 +1,11 @@ #ifndef _SOUTHBRIDGE_RICOH_RL5C476 #define _SOUTHBRIDGE_RICOH_RL5C476 -extern struct chip_operations southbridge_ricoh_rl5c476_control; +extern struct chip_operations southbridge_ricoh_rl5c476_ops; struct southbridge_ricoh_rl5c476_config { - int num; + int enable_cf; + }; #endif /* _SOUTHBRIDGE_RL5C476 */ diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c index ede34b61f5..8495c3f941 100644 --- a/src/southbridge/ricoh/rl5c476/rl5c476.c +++ b/src/southbridge/ricoh/rl5c476/rl5c476.c @@ -14,10 +14,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ - +/* (C) Copyright 2005 Nick Barker <nick.barker@btinternet.com + brought into line with the current architecture of LinuxBios */ #include <arch/io.h> @@ -26,194 +27,174 @@ #include <device/pci_ops.h> #include <device/pci_ids.h> #include <console/console.h> +#include <device/cardbus.h> #include "rl5c476.h" #include "chip.h" +static int enable_cf_boot = 0; +static unsigned int cf_base; + static void udelay(int i){ for(; i > 0 ; i--) inb(0x80); } -static void -dump_south(void) -{ - device_t dev0; - dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0); - dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev0); - int i,j; - - for(i = 0; i < 256; i += 16) { - printk_debug("0x%x: ", i); - for(j = 0; j < 16; j++) { - printk_debug("%02x ", pci_read_config8(dev0, i+j)); - } - printk_debug("\n"); - } - printk_debug("Card32\n"); - for(i = 0 ; i < 256 ; i+=16){ - printk_debug("0x%x: ",i); - for(j = 0 ; j < 16 ; j++){ - printk_debug(" %02x",*(unsigned char *)(0x80000000+i+j)); - } - printk_debug("\n"); - } - printk_debug("Card16\n"); - for(i = 0; i < 256; i += 16) { - printk_debug("0x%x: ", i); - for(j = 0; j < 16; j++) { - printk_debug("%02x ", *(unsigned char *)(0x80000800+ i+j)); - } - printk_debug("\n"); - } - printk_debug("CF Config\n"); - for(i = 0 ; i < 256 ; i+=16){ - printk_debug("0x%x: ",i); - for(j=0 ; j < 16 ; j++){ - printk_debug("%02x ",*(unsigned char *)(0x81000200 + i + j)); - } - printk_debug("\n"); - } -} - - static void rl5c476_init(device_t dev) { //unsigned char enables; pc16reg_t *pc16; - int i; -#error "FIXME implement carbus bridge support" -#error "FIXME this code is close to a but the conversion needs more work" + unsigned char *base; + /* cardbus controller function 1 for CF Socket */ printk_debug("rl5c476 init\n"); - /* setup pci header manually because 'pci_device.c' doesn't know how to handle - * pci to cardbus bridges - (header type 2 I think) - */ + printk_debug("CF Base = %0x\n",cf_base); + /* misc control register */ + pci_write_config16(dev,0x82,0x00a0); - /* initialize function zero - pcmcia socket so it behaves itself */ - /* FIXME - statically put control memory at 0xe0000000 for now - * one day the pci_device allocator might do this */ - pci_write_config32(dev,0x10,0xe0000000); - pci_write_config8(dev,0x0d,0x20); - pci_write_config8(dev,0x19,0x02); - pci_write_config8(dev,0x1a,0x02); - pci_write_config8(dev,0x1b,0x20); - //pci_write_config8(dev,0x3c,0); - pci_write_config8(dev,0x82,0x00a0); - pci_write_config16(dev,0x04,0x07); + /* set up second slot as compact flash port if asked to do so */ + if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){ - - /* get second function - i.e. compact flash socket */ - dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev); + /* make sure isa interrupts are enabled */ + pci_write_config16(dev,0x3e,0x0780); + /* pick up where 16 bit card control structure is (0x800 bytes into config structure) */ + base = (unsigned char *)pci_read_config32(dev,0x10); + pc16 = (pc16reg_t *)(base + 0x800); - /* FIXME - control structure statically declared at 0xe0008000 for now */ - pci_write_config32(dev,0x10,0xe0008000); - pci_write_config8(dev,0x0d,0x20); - pci_write_config8(dev,0x19,0x03); - pci_write_config8(dev,0x1a,0x03); - pci_write_config8(dev,0x1b,0x20); + /* disable memory and io windows and turn off socket power */ + pc16->pwctrl = 0; - //pci_write_config8(dev,0x3c,0x0); - pci_write_config16(dev,0x3e,0x0780); - pci_write_config16(dev,0x82,0x00a0); + /* disable irq lines */ + pc16->igctrl = 0; - pci_write_config16(dev,0x04,0x07); + /* disable memory and I/O windows */ + pc16->awinen = 0; + /* reset card, configure for I/O and set IRQ line */ + pc16->igctrl = 0x69; - /* pick up where 16 bit card control structure is */ - pc16 = (pc16reg_t *)(0xe0008800); + // set io window 0 for 1e0 - 1ef + /* note this now sets CF up on a contiguous I/O window of 16 bytes, 0x1e0 to 0x1ef + Be warned that this is not a standard IDE address as automatically detected by the likes + of Filo, and would need patching to recognise these addresses as an IDE drive */ + /* an earlier version of this driver set up 2 io windows to emulate the expected addresses + for IDE2, however the pcmcia package within Linux then could not re-initiailse the + device as it tried to take control of it. So I belive it is easier to patch Filo or the like + to pick up this drive rather than playing silly games as the kernel tries to boot. + */ + pc16->iostl0 = 0xe0; + pc16->iosth0 = 1; - /* disable memory and io windows and turn off socket power */ - pc16->pwctrl = 0; + pc16->iospl0 = 0xef; + pc16->iosph0 = 1; - /* disable irq lines */ - pc16->igctrl = 0; + pc16->ioffl0 = 0; + pc16->ioffh0 = 0; - /* disable memory and I/O windows */ - pc16->awinen = 0; + // clear window 1 + pc16->iostl1 = 0; + pc16->iosth1 = 0; - /* reset card, configure for I/O and set IRQ line */ - pc16->igctrl = 0x69; + pc16->iospl1 = 0; + pc16->iosph1 = 0; + pc16->ioffl1 = 0x0; + pc16->ioffh1 = 0; - // set io window 0 for 1e8 - 1ef - pc16->iostl0 = 0xe8; - pc16->iosth0 = 1; - pc16->iospl0 = 0xef; - pc16->iosph0 = 1; - // add io offset of 8 so that CF card will decode 0x1e8 as 0x1f0 i.e. the first byte of - // a 16 byte aligned, 16 byte window etc - pc16->ioffl0 = 0x8; - pc16->ioffh0 = 0; + // set up CF config window + pc16->smpga0 = cf_base>>24; + pc16->smsth0 = (cf_base>>20)&0x0f; + pc16->smstl0 = (cf_base>>12)&0xff; + pc16->smsph0 = ((cf_base>>20)&0x0f) | 0x80; + pc16->smspl0 = (cf_base>>12)&0xff; + pc16->moffl0 = 0; + pc16->moffh0 = 0x40; - // set io window 1 for 3ed - 3ee - pc16->iostl1 = 0xed; - pc16->iosth1 = 3; - pc16->iospl1 = 0xee; - pc16->iosph1 = 3; + // set I/O width for Auto Data width + pc16->ioctrl = 0x22; - pc16->ioffl1 = 0x0; - pc16->ioffh1 = 0; + // enable I/O window 0 and 1 + pc16->awinen = 0xc1; - // FIXME statically declare CF config window at 0xe1000000 - pc16->smstl0 = 0; - pc16->smsth0 = 0; - pc16->smspl0 = 0; - pc16->smsph0 = 0x80; - pc16->moffl0 = 0; - pc16->moffh0 = 0x40; - pc16->smpga0 = 0xe1; - // set I/O width for Auto Data width - pc16->ioctrl = 0x22; + pc16->miscc1 = 1; + // apply power and enable outputs + pc16->pwctrl = 0xb0; + - // enable I/O window 0 and 1 - pc16->awinen = 0xc1; + // delay could be optimised, but this works + udelay(100000); + + pc16->igctrl = 0x69; - pc16->miscc1 = 1; + // 16 bit CF always have first config byte at 0x200 into Config structure, + // but CF+ May Not according to spec - should locate through reading tuple data, + // but this will do for now !!! + unsigned char *cptr; + cptr = (unsigned char *)(cf_base + 0x200); + printk_debug("CF Config = %x\n",*cptr); - // apply power and enable outputs - pc16->pwctrl = 0xb0; - + // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io + // windows of the bridge set up above to map those bytes into the + // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee) + *cptr = 0x41; + } - // delay could be optimised, but this works - udelay(100000); - - pc16->igctrl = 0x69; +} - unsigned char *cptr; - cptr = (unsigned char *)(0xe1000200); - printk_debug("CF Config = %x\n",*cptr); +void rl5c476_read_resources(device_t dev) +{ - // FIX Me 16 bit CF always have first config byte at 0x200 into Config structure, - // but CF+ May Not according to spec - should locate through reading tuple data, - // but this will do for now !!! + struct resource *resource; + /* for cf socket we need an extra memory window for the control structure of the cf itself */ + if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){ + resource = new_resource(dev,1); /* fake index as it isn't in pci config space */ + resource->flags |= IORESOURCE_MEM ; + resource->size = 0x1000; + resource->align = resource->gran = 12; + resource->limit= 0xffff0000; + //compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags); + } + cardbus_read_resources(dev); - // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io - // windows of the bridge set up above to map those bytes into the - // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee) - *cptr = 0x41; +} +void rl5c476_set_resources(device_t dev) +{ + + struct resource *resource; + printk_debug("%s In set resources \n",dev_path(dev)); + if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){ + resource = find_resource(dev,1); + if( !(resource->flags & IORESOURCE_STORED) ){ + resource->flags |= IORESOURCE_STORED ; + compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags); + printk_debug("%s 1 ==> %x\n",dev_path(dev),resource->base); + cf_base = resource->base; + } + } + + pci_dev_set_resources(dev); } static struct device_operations ricoh_rl5c476_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .inti = rl5c476_init, - .scan_bus = pci_scan_bridge, + .read_resources = rl5c476_read_resources, + .set_resources = rl5c476_set_resources, + .enable_resources = cardbus_enable_resources, + .init = rl5c476_init, + .scan_bus = cardbus_scan_bridge, }; static struct pci_driver ricoh_rl5c476_driver __pci_driver = { @@ -222,7 +203,15 @@ static struct pci_driver ricoh_rl5c476_driver __pci_driver = { .device = PCI_DEVICE_ID_RICOH_RL5C476, }; -struct chip_operations southbridge_ricoh_rl5c476_control = { +void southbridge_init(device_t dev) +{ + + struct southbridge_ricoh_rl5c476_config *conf = dev->chip_info; + enable_cf_boot = conf->enable_cf; + +} + +struct chip_operations southbridge_ricoh_rl5c476_ops = { CHIP_NAME("RICOH RL5C476") - .enable = southbridge_init, + .enable_dev = southbridge_init, }; diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.h b/src/southbridge/ricoh/rl5c476/rl5c476.h index 0ded3d5aa9..c2da0de17f 100644 --- a/src/southbridge/ricoh/rl5c476/rl5c476.h +++ b/src/southbridge/ricoh/rl5c476/rl5c476.h @@ -14,8 +14,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ /* rl5c476 routines and defines*/ diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c index ea649a418c..e6287ece9c 100644 --- a/src/southbridge/via/vt8235/vt8235.c +++ b/src/southbridge/via/vt8235/vt8235.c @@ -10,7 +10,7 @@ /* * Base VT8235. */ -static device_t lpc_dev; +static int enabled = 0; void hard_reset(void) { @@ -22,18 +22,15 @@ static void keyboard_on(struct device *dev) unsigned char regval; regval = pci_read_config8(dev, 0x51); -// regval |= 0x0f; - /* !!!FIX let's try this */ - regval |= 0x1d; + regval |= 0x05; + regval &= 0xfd; pci_write_config8(dev, 0x51, regval); init_pc_keyboard(0x60, 0x64, 0); } -void dump_south(void) +void dump_south(device_t dev0) { - device_t dev0; - dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0); int i,j; for(i = 0; i < 256; i += 16) { @@ -45,23 +42,53 @@ void dump_south(void) } } -void set_led(struct device *dev) +void set_led() { // set power led to steady now that lxbios has virtually done its job + device_t dev; + dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0); pci_write_config8(dev, 0x94, 0xb0); } + static void vt8235_enable(struct device *dev) { struct southbridge_via_vt8235_config *conf = dev->chip_info; + unsigned char regval; + unsigned short vendor,model; + + + vendor = pci_read_config16(dev,0); + model = pci_read_config16(dev,0x2); + + printk_debug("In vt8235_enable %04x %04x.\n",vendor,model); + + /* if this is not the southbridge itself just return */ + /* this is necessary because USB devices are slot 10, whereas this device is slot 11 + therefore usb devices get called first during the bus scan */ + + if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235)) + return; + + printk_debug("Initialising Devices\n"); + + + setup_i8259(); // make sure interupt controller is configured before keyboard init + + /* enable RTC and ethernet */ + regval = pci_read_config8(dev, 0x51); + regval |= 0x18; + pci_write_config8(dev, 0x51, regval); + + /* turn on keyboard */ + keyboard_on(dev); + + /* enable USB 1.1 & USB 2.0 -redundant really since we've already been there - see note above*/ + regval = pci_read_config8(dev, 0x50); + regval &= ~(0x36); + pci_write_config8(dev, 0x50, regval); + - printk_debug("In vt8235_enable.\n"); - if (!lpc_dev) { - lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8235, 0); - if (conf->enable_keyboard) - keyboard_on(lpc_dev); - } } struct chip_operations southbridge_via_vt8235_ops = { diff --git a/src/southbridge/via/vt8235/vt8235.h b/src/southbridge/via/vt8235/vt8235.h index c8e79fc480..f071371938 100644 --- a/src/southbridge/via/vt8235/vt8235.h +++ b/src/southbridge/via/vt8235/vt8235.h @@ -17,8 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ /* winbond access routines and defines*/ diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c index 1775203ca8..fedda9c3be 100644 --- a/src/southbridge/via/vt8235/vt8235_ide.c +++ b/src/southbridge/via/vt8235/vt8235_ide.c @@ -13,7 +13,7 @@ static void ide_init(struct device *dev) printk_info("Enabling VIA IDE.\n"); - if (!conf->enable_native_ide) { + /*if (!conf->enable_native_ide) { */ /* * Run the IDE controller in 'compatiblity mode - i.e. don't * use PCI interrupts. Using PCI ints confuses linux for some @@ -28,7 +28,7 @@ static void ide_init(struct device *dev) enables = pci_read_config8(dev, 0x42); printk_debug("enables in reg 0x42 read back as 0x%x\n", enables); - } + /* } */ enables = pci_read_config8(dev, 0x40); printk_debug("enables in reg 0x40 0x%x\n", enables); diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c index 4a3c683f61..3e220940cd 100644 --- a/src/southbridge/via/vt8235/vt8235_lpc.c +++ b/src/southbridge/via/vt8235/vt8235_lpc.c @@ -10,21 +10,30 @@ #include "vt8235.h" #include "chip.h" -/* - * Taken some liberties - changed irq structures to pins numbers so that it is - * easier to change PCI irq assignments without having to change each PCI - * function individually - * - * pciIrqs contains the irqs assigned for PCI pins A-D - * - * Setting will depend on motherboard as irqs can be quite scarce e.g on - * EPIA-MII, 16 bit CF card wants a dedicated IRQ. A 16 bit card in pcmcia - * socket may want another - for now only claim 3 interupts for PCI, leaving at - * least one spare for CF. On EPIA-M one could allocated all four irqs to - * different numbers since there are no cardbus devices - */ - -static const unsigned char pciIrqs[4] = { 11 , 5, 10 , 12 }; +/* The epia-m is really short on interrupts available, so PCI interupts A & D are ganged togther and so are B & C. + This is how the Award bios sets it up too. + epia can be more generous as it does not need to reserve interrupts for cardbus devices, but if changed then + make sure that ACPI dsdt is changed to suit. + + IRQ 0 = timer + IRQ 1 = keyboard + IRQ 2 = cascade + IRQ 3 = COM 2 + IRQ 4 = COM 1 + IRQ 5 = available for PCI interrupts + IRQ 6 = floppy or availbale for PCI if floppy controller disabled + IRQ 7 = LPT or available if LPT port disabled + IRQ 8 = rtc + IRQ 9 = available for PCI interrupts + IRQ 10 = cardbus slot or available for PCI if no cardbus (ie epia) + IRQ 11 = cardbus slot or available for PCI if no cardbus (ie epia) + IRQ 12 = PS2 mouse (hardwired to 12) + IRQ 13 = legacy FPU interrupt + IRQ 14 = IDE controller 1 + IRQ 15 = IDE controller 2 + +*/ +static const unsigned char pciIrqs[4] = { 5 , 9 , 9, 5 }; static const unsigned char usbPins[4] = { 'A','B','C','D'}; static const unsigned char enetPins[4] = { 'A','B','C','D'}; @@ -32,14 +41,9 @@ static const unsigned char slotPins[4] = { 'B','C','D','A'}; static const unsigned char firewirePins[4] = { 'B','C','D','A'}; static const unsigned char vt8235Pins[4] = { 'A','B','C','D'}; static const unsigned char vgaPins[4] = { 'A','B','C','D'}; -static const unsigned char cbPins[4] = { 'A','B','C','D'}; +static const unsigned char cbPins[4] = { 'D','A','B','C'}; static const unsigned char riserPins[4] = { 'A','B','C','D'}; -/* - Our IDSEL mappings are as follows - PCI slot is AD31 (device 15) (00:14.0) - Southbridge is AD28 (device 12) (00:11.0) -*/ static unsigned char *pin_to_irq(const unsigned char *pin) { @@ -54,19 +58,12 @@ static unsigned char *pin_to_irq(const unsigned char *pin) static void pci_routing_fixup(struct device *dev) { printk_info("%s: dev is %p\n", __FUNCTION__, dev); - if (dev) { - /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D - - PINTA = IRQ11 - PINTB = IRQ5 - PINTC = IRQ10 - PINTD = IRQ12 - */ - pci_write_config8(dev, 0x55, pciIrqs[0] << 4); - pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) ); - pci_write_config8(dev, 0x57, pciIrqs[3] << 4); - } + + /* set up PCI IRQ routing */ + pci_write_config8(dev, 0x55, pciIrqs[0] << 4); + pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) ); + pci_write_config8(dev, 0x57, pciIrqs[3] << 4); + // firewire built into southbridge printk_info("setting firewire\n"); @@ -201,12 +198,6 @@ static void vt8235_init(struct device *dev) // Set 0x58 to 0x03 to match Award pci_write_config8(dev, 0x58, 0x03); - // enable the ethernet/RTC - if (dev) { - enables = pci_read_config8(dev, 0x51); - enables |= 0x18; - pci_write_config8(dev, 0x51, enables); - } /* enable serial irq */ pci_write_config8(dev, 0x52, 0x9); @@ -224,6 +215,36 @@ static void vt8235_init(struct device *dev) rtc_init(0); } +/* total kludge to get lxb to call our childrens set/enable functions - these are not called unless this + device has a resource to set - so set a dummy one */ +void vt8235_read_resources(device_t dev) +{ + + struct resource *resource; + pci_dev_read_resources(dev); + resource = new_resource(dev, 1); + resource->flags |= IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO | IORESOURCE_STORED; + resource->size = 2; + resource->base = 0x2e; + +} +void vt8235_set_resources(device_t dev) +{ + struct resource *resource; + //resource = find_resource(dev,1); + //resource->flags |= IORESOURCE_STORED; + pci_dev_set_resources(dev); +} + +void vt8235_enable_resources(device_t dev) +{ + /* vt8235 is not a pci bridge and has no resources of its own (other than standard PC i/o addresses) + however it does control the isa bus and so we need to manually call enable childrens resources on that bus */ + pci_dev_enable_resources(dev); + enable_childrens_resources(dev); + +} + static void southbridge_init(struct device *dev) { vt8235_init(dev); @@ -231,9 +252,9 @@ static void southbridge_init(struct device *dev) } static struct device_operations vt8235_lpc_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, + .read_resources = vt8235_read_resources, + .set_resources = vt8235_set_resources, + .enable_resources = vt8235_enable_resources, .init = &southbridge_init, .scan_bus = scan_static_bus, }; diff --git a/src/southbridge/via/vt8235/vt8235_usb.c b/src/southbridge/via/vt8235/vt8235_usb.c index 24c6a17acb..8142c535da 100644 --- a/src/southbridge/via/vt8235/vt8235_usb.c +++ b/src/southbridge/via/vt8235/vt8235_usb.c @@ -5,11 +5,14 @@ #include <device/pci_ids.h> #include "vt8235.h" +/* really nothing to do here, both usb 1.1 & 2.0 are normal PCI devices and so get resources allocated + properly. They are part of the southbridge and are enabled in the chip enable function for the southbridge */ + static void usb_init(struct device *dev) { printk_debug("Configuring VIA USB 1.1\n"); - pci_write_config8(dev, 0x04, 0x07); + /* pci_write_config8(dev, 0x04, 0x07); */ /* * To disable; though do we need to do this? @@ -25,6 +28,7 @@ static void usb_init(struct device *dev) */ } +/* static struct device_operations usb_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, @@ -39,3 +43,4 @@ static struct pci_driver northbridge_driver __pci_driver = { .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_82C586_2, }; +*/
\ No newline at end of file diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c index 30d9592e5c..47a1ba48bb 100644 --- a/src/superio/via/vt1211/vt1211.c +++ b/src/superio/via/vt1211/vt1211.c @@ -14,8 +14,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ /* vt1211 routines and defines*/ @@ -58,6 +58,25 @@ static void pnp_exit_ext_func_mode(device_t dev) outb(0xaa, dev->path.u.pnp.port); } +static void vt1211_set_iobase(device_t dev, unsigned index, unsigned iobase) +{ + + switch (dev->path.u.pnp.device) { + case VT1211_FDC: + case VT1211_PP: + case VT1211_SP1: + case VT1211_SP2: + pnp_write_config(dev, index + 0, (iobase >> 2) & 0xff); + break; + case VT1211_HWM: + default: + pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff); + pnp_write_config(dev, index + 1, iobase & 0xff); + break; + } + +} + static void init_hwm(unsigned long base) { int i; @@ -79,6 +98,9 @@ static void vt1211_init(struct device *dev) } switch (dev->path.u.pnp.device) { + case VT1211_FDC: + case VT1211_PP: + break; case VT1211_SP1: res0 = find_resource(dev, PNP_IDX_IO0); init_uart8250(res0->base, &conf->com1); @@ -95,24 +117,12 @@ static void vt1211_init(struct device *dev) printk_info("vt1211 asked to initialise unknown device!\n"); } - /* activate com2 - start_conf_pnp(3); - write_pnp(0x60,0xbe); - write_pnp(0x70,0x3); - write_pnp(0xf0,0x02); - write_pnp(0x30,0x01); - end_conf_pnp(); - - // Activate the vt1211 hardware monitor - start_conf_pnp(0x0b); - write_pnp(0x60,0xec); - write_pnp(0x30,1); - end_conf_pnp(); */ } void vt1211_pnp_enable_resources(device_t dev) { + printk_debug("%s - enabling\n",dev_path(dev)); pnp_enter_ext_func_mode(dev); pnp_enable_resources(dev); pnp_exit_ext_func_mode(dev); @@ -120,8 +130,54 @@ void vt1211_pnp_enable_resources(device_t dev) void vt1211_pnp_set_resources(struct device *dev) { + int i; + struct resource *resource; + +#if CONFIG_CONSOLE_SERIAL8250 == 1 + if( dev->path.u.pnp.device == 2 ){ + for( i = 0 ; i < dev->resources; i++){ + resource = &dev->resource[i]; + resource->flags |= IORESOURCE_STORED; + report_resource_stored(dev, resource, ""); + } + return; + } +#endif pnp_enter_ext_func_mode(dev); - pnp_set_resources(dev); + /* Select the device */ + pnp_set_logical_device(dev); + + /* Paranoia says I should disable the device here... */ + for(i = 0; i < dev->resources; i++) { + resource = &dev->resource[i]; + if (!(resource->flags & IORESOURCE_ASSIGNED)) { + printk_err("ERROR: %s %02x %s size: 0x%010Lx not assigned\n", + dev_path(dev), dev->resource->index, + resource_type(resource), + resource->size); + continue; + } + + /* Now store the resource */ + if (resource->flags & IORESOURCE_IO) { + vt1211_set_iobase(dev, resource->index, resource->base); + } + else if (resource->flags & IORESOURCE_DRQ) { + pnp_set_drq(dev, resource->index, resource->base); + } + else if (resource->flags & IORESOURCE_IRQ) { + pnp_set_irq(dev, resource->index, resource->base); + } + else { + printk_err("ERROR: %s %02x unknown resource type\n", + dev_path(dev), resource->index); + return; + } + resource->flags |= IORESOURCE_STORED; + + report_resource_stored(dev, resource, ""); + } + pnp_exit_ext_func_mode(dev); } @@ -148,7 +204,7 @@ static struct pnp_info pnp_dev_info[] = { { &ops, VT1211_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, { &ops, VT1211_SP1, PNP_IO0 | PNP_IRQ0, { 0x07f8, 0}, }, { &ops, VT1211_SP2, PNP_IO0 | PNP_IRQ0, { 0x07f8, 0}, }, - { &ops, VT1211_HWM, PNP_IO0 , { 0xfff8, 0 }, }, + { &ops, VT1211_HWM, PNP_IO0 , { 0xff00, 0 }, }, }; static void enable_dev(struct device *dev) |