diff options
Diffstat (limited to 'src')
4 files changed, 122 insertions, 0 deletions
diff --git a/src/mainboard/google/dedede/Kconfig.name b/src/mainboard/google/dedede/Kconfig.name index da8c1ed165..1637ab90c8 100644 --- a/src/mainboard/google/dedede/Kconfig.name +++ b/src/mainboard/google/dedede/Kconfig.name @@ -99,6 +99,8 @@ config BOARD_GOOGLE_STORO bool "-> Storo" select BOARD_GOOGLE_BASEBOARD_DEDEDE select BASEBOARD_DEDEDE_LAPTOP + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU config BOARD_GOOGLE_SASUKETTE bool "-> Sasukette" diff --git a/src/mainboard/google/dedede/variants/storo/Makefile.inc b/src/mainboard/google/dedede/variants/storo/Makefile.inc new file mode 100644 index 0000000000..eb2c9bc021 --- /dev/null +++ b/src/mainboard/google/dedede/variants/storo/Makefile.inc @@ -0,0 +1,3 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +ramstage-y += gpio.c diff --git a/src/mainboard/google/dedede/variants/storo/gpio.c b/src/mainboard/google/dedede/variants/storo/gpio.c new file mode 100644 index 0000000000..0f5b6d292b --- /dev/null +++ b/src/mainboard/google/dedede/variants/storo/gpio.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { + /* D15 : EN_PP3300_CAMERA */ + PAD_CFG_GPO(GPP_D15, 1, PLTRST), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} diff --git a/src/mainboard/google/dedede/variants/storo/overridetree.cb b/src/mainboard/google/dedede/variants/storo/overridetree.cb index e4624e5f72..57a6cdf124 100644 --- a/src/mainboard/google/dedede/variants/storo/overridetree.cb +++ b/src/mainboard/google/dedede/variants/storo/overridetree.cb @@ -1,5 +1,8 @@ chip soc/intel/jasperlake + # USB Port Configuration + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # User Facing Camera + # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -37,6 +40,34 @@ chip soc/intel/jasperlake }" device domain 0 on + device pci 05.0 on # IPU - MIPI Camera + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{1,4}" + register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1"" + register "cio2_prt[0]" = "0" + register "cio2_prt[1]" = "2" + device generic 0 on end + end + end + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""User Facing Camera"" + register "type" = "UPC_TYPE_INTERNAL" + register "has_power_resource" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)" + register "enable_delay_ms" = "20" + device usb 2.5 on end + end + end + end + end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" @@ -63,5 +94,75 @@ chip soc/intel/jasperlake device i2c 10 on end end end # I2C 2 + device pci 15.3 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "1" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360000000" + register "link_freq[1]" = "180000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0c on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""GT24C08"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_size" = "0x0400" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x08" + register "nvm_compat" = ""atmel,24c08"" + + device i2c 50 on end + end + end # I2C 3 end end |