diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/amd/common/block/uart/Kconfig | 25 | ||||
| -rw-r--r-- | src/soc/amd/common/block/uart/uart_console.c | 2 | ||||
| -rw-r--r-- | src/soc/amd/picasso/include/soc/southbridge.h | 16 | ||||
| -rw-r--r-- | src/soc/amd/picasso/uart.c | 57 |
4 files changed, 1 insertions, 99 deletions
diff --git a/src/soc/amd/common/block/uart/Kconfig b/src/soc/amd/common/block/uart/Kconfig index 599594ba5e..c348187260 100644 --- a/src/soc/amd/common/block/uart/Kconfig +++ b/src/soc/amd/common/block/uart/Kconfig @@ -21,31 +21,6 @@ config AMD_SOC_CONSOLE_UART 2: 0xfedc3000 3: 0xfedcf000 -choice - prompt "UART Frequency" - depends on AMD_SOC_CONSOLE_UART - default AMD_SOC_UART_48MZ - -config AMD_SOC_UART_48MZ - bool "48 MHz clock" - help - Select this option for the most compatibility. - -config AMD_SOC_UART_1_8MZ - bool "1.8432 MHz clock" - help - Select this option if an old payload or Linux ttyS0 arguments require - a 1.8432 MHz clock source for the UART. - -endchoice - -config AMD_SOC_UART_LEGACY - bool "Decode legacy I/O range" - help - Assign I/O 3F8, 2F8, etc. to an integrated AMD SoC UART. A UART - accessed with I/O does not allow all the features of MMIO. The MMIO - decode is still present when this option is used. - config CONSOLE_UART_BASE_ADDRESS depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART hex diff --git a/src/soc/amd/common/block/uart/uart_console.c b/src/soc/amd/common/block/uart/uart_console.c index c1c17232fb..ff9122fbe4 100644 --- a/src/soc/amd/common/block/uart/uart_console.c +++ b/src/soc/amd/common/block/uart/uart_console.c @@ -15,5 +15,5 @@ uintptr_t uart_platform_base(unsigned int idx) unsigned int uart_platform_refclk(void) { - return CONFIG(AMD_SOC_UART_48MZ) ? 48000000 : 115200 * 16; + return 48000000; } diff --git a/src/soc/amd/picasso/include/soc/southbridge.h b/src/soc/amd/picasso/include/soc/southbridge.h index 220d92ea7a..c7f30e24ec 100644 --- a/src/soc/amd/picasso/include/soc/southbridge.h +++ b/src/soc/amd/picasso/include/soc/southbridge.h @@ -13,14 +13,6 @@ * - fixed addresses offset from 0xfed80000 */ -/* SMBus controller registers: 0xfed80000 or D14F0 */ -#define SMB_UART_CONFIG 0xfc -#define SMB_UART3_1_8M BIT(31) /* defaults are 0 = 48MHz */ -#define SMB_UART2_1_8M BIT(30) -#define SMB_UART1_1_8M BIT(29) -#define SMB_UART0_1_8M BIT(28) -#define SMB_UART_1_8M_SHIFT 28 - /* Power management registers: 0xfed80300 or index/data at IO 0xcd6/cd7 */ #define PM_PCI_CTRL 0x08 #define FORCE_SLPSTATE_RETRY BIT(25) @@ -144,13 +136,6 @@ #define FCH_AOAC_DEV_ESPI 27 #define FCH_LEGACY_UART_DECODE (ALINK_AHB_ADDRESS + 0x20) /* 0xfedc0020 */ -#define FCH_LEGACY_UART_MAP_SHIFT 8 -#define FCH_LEGACY_UART_MAP_SIZE 2 -#define FCH_LEGACY_UART_MAP_MASK 0x3 -#define FCH_LEGACY_UART_RANGE_2E8 0 -#define FCH_LEGACY_UART_RANGE_2F8 1 -#define FCH_LEGACY_UART_RANGE_3E8 2 -#define FCH_LEGACY_UART_RANGE_3F8 3 #define PM1_LIMIT 16 #define GPE0_LIMIT 28 @@ -196,7 +181,6 @@ void southbridge_final(void *chip_info); void southbridge_init(void *chip_info); void fch_pre_init(void); void fch_early_init(void); -void set_uart_legacy_config(unsigned int uart_idx, unsigned int range_idx); /* Initialize all the i2c buses that are marked with early init. */ void i2c_soc_early_init(void); diff --git a/src/soc/amd/picasso/uart.c b/src/soc/amd/picasso/uart.c index b417051b97..472a0be7d5 100644 --- a/src/soc/amd/picasso/uart.c +++ b/src/soc/amd/picasso/uart.c @@ -5,7 +5,6 @@ #include <commonlib/helpers.h> #include <device/mmio.h> #include <amdblocks/gpio_banks.h> -#include <amdblocks/acpimmio.h> #include <amdblocks/aoac.h> #include <soc/southbridge.h> #include <soc/gpio.h> @@ -42,71 +41,17 @@ uintptr_t get_uart_base(unsigned int idx) return uart_info[idx].base; } -static bool get_uart_idx(uintptr_t base, unsigned int *idx) -{ - for (unsigned int i = 0; i < ARRAY_SIZE(uart_info); i++) { - if (base == uart_info[i].base) { - *idx = i; - return true; - } - } - - return false; -} - void clear_uart_legacy_config(void) { write16((void *)FCH_LEGACY_UART_DECODE, 0); } -void set_uart_legacy_config(unsigned int uart_idx, unsigned int range_idx) -{ - uint16_t uart_legacy_decode; - uint8_t uart_map_offset; - - if (uart_idx >= ARRAY_SIZE(uart_info) || range_idx >= ARRAY_SIZE(uart_info)) - return; - - uart_legacy_decode = read16((void *)FCH_LEGACY_UART_DECODE); - /* Map uart_idx to io range_idx */ - uart_map_offset = range_idx * FCH_LEGACY_UART_MAP_SIZE + FCH_LEGACY_UART_MAP_SHIFT; - uart_legacy_decode &= ~(FCH_LEGACY_UART_MAP_MASK << uart_map_offset); - uart_legacy_decode |= uart_idx << uart_map_offset; - /* Enable io range */ - uart_legacy_decode |= 1 << range_idx; - write16((void *)FCH_LEGACY_UART_DECODE, uart_legacy_decode); -} - -static void enable_uart_legacy_decode(uintptr_t base) -{ - unsigned int idx; - const uint8_t range_idx[ARRAY_SIZE(uart_info)] = { - FCH_LEGACY_UART_RANGE_3F8, - FCH_LEGACY_UART_RANGE_2F8, - FCH_LEGACY_UART_RANGE_3E8, - FCH_LEGACY_UART_RANGE_2E8, - }; - - if (get_uart_idx(base, &idx)) { - set_uart_legacy_config(idx, range_idx[idx]); - } -} - void set_uart_config(unsigned int idx) { - uint32_t uart_ctrl; - if (idx >= ARRAY_SIZE(uart_info)) return; program_gpios(uart_info[idx].mux, 2); - - if (CONFIG(AMD_SOC_UART_1_8MZ)) { - uart_ctrl = sm_pci_read32(SMB_UART_CONFIG); - uart_ctrl |= 1 << (SMB_UART_1_8M_SHIFT + idx); - sm_pci_write32(SMB_UART_CONFIG, uart_ctrl); - } - } static const char *uart_acpi_name(const struct device *dev) @@ -151,8 +96,6 @@ static void uart_enable(struct device *dev) if (dev->enabled) { power_on_aoac_device(dev_id); wait_for_aoac_enabled(dev_id); - if (CONFIG(AMD_SOC_UART_LEGACY)) - enable_uart_legacy_decode(dev->path.mmio.addr); } else { power_off_aoac_device(dev_id); } |