diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/Kconfig | 265 | ||||
| -rw-r--r-- | src/cpu/amd/model_10xxx/Kconfig | 4 | ||||
| -rw-r--r-- | src/cpu/amd/model_fxx/Kconfig | 4 | ||||
| -rw-r--r-- | src/devices/Kconfig | 226 | ||||
| -rw-r--r-- | src/drivers/pc80/Kconfig | 8 |
5 files changed, 250 insertions, 257 deletions
diff --git a/src/Kconfig b/src/Kconfig index a8f52213d8..216ce0bb3b 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -218,25 +218,17 @@ comment "Southbridge" source src/southbridge/Kconfig comment "Super I/O" source src/superio/Kconfig -comment "Devices" -source src/devices/Kconfig comment "Embedded Controllers" source src/ec/Kconfig endmenu +source src/devices/Kconfig + menu "Generic Drivers" source src/drivers/Kconfig endmenu -config PCI_BUS_SEGN_BITS - int - default 0 - -config PCI_ROM_RUN - bool - default n - config HEAP_SIZE hex default 0x4000 @@ -320,10 +312,6 @@ config IOAPIC bool default n -config TPM - bool - default n - config CBFS_SIZE hex default ROM_SIZE @@ -353,11 +341,6 @@ config GFXUMA help Enable Unified Memory Architecture for graphics. -# TODO -# menu "Drivers" -# -# endmenu - config HAVE_ACPI_TABLES bool help @@ -569,221 +552,6 @@ config COMPRESSED_PAYLOAD_NRV2B endmenu -menu "VGA BIOS" - -config VGA_BIOS - bool "Add a VGA BIOS image" - help - Select this option if you have a VGA BIOS image that you would - like to add to your ROM. - - You will be able to specify the location and file name of the - image later. - -config VGA_BIOS_FILE - string "VGA BIOS path and filename" - depends on VGA_BIOS - default "vgabios.bin" - help - The path and filename of the file to use as VGA BIOS. - -config VGA_BIOS_ID - string "VGA device PCI IDs" - depends on VGA_BIOS - default "1106,3230" - help - The comma-separated PCI vendor and device ID that would associate - your VGA BIOS to your video card. - - Example: 1106,3230 - - In the above example 1106 is the PCI vendor ID (in hex, but without - the "0x" prefix) and 3230 specifies the PCI device ID of the - video card (also in hex, without "0x" prefix). - -config INTEL_MBI - bool "Add an MBI image" - depends on NORTHBRIDGE_INTEL_I82830 - help - Select this option if you have an Intel MBI image that you would - like to add to your ROM. - - You will be able to specify the location and file name of the - image later. - -config MBI_FILE - string "Intel MBI path and filename" - depends on INTEL_MBI - default "mbi.bin" - help - The path and filename of the file to use as VGA BIOS. - -endmenu - -menu "Display" - depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE - -config FRAMEBUFFER_SET_VESA_MODE - prompt "Set VESA framebuffer mode" - bool - depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE - help - Set VESA framebuffer mode (needed for bootsplash) - -choice - prompt "VESA framebuffer video mode" - default FRAMEBUFFER_VESA_MODE_117 - depends on FRAMEBUFFER_SET_VESA_MODE - help - This option sets the resolution used for the coreboot framebuffer (and - bootsplash screen). - -config FRAMEBUFFER_VESA_MODE_100 - bool "640x400 256-color" - -config FRAMEBUFFER_VESA_MODE_101 - bool "640x480 256-color" - -config FRAMEBUFFER_VESA_MODE_102 - bool "800x600 16-color" - -config FRAMEBUFFER_VESA_MODE_103 - bool "800x600 256-color" - -config FRAMEBUFFER_VESA_MODE_104 - bool "1024x768 16-color" - -config FRAMEBUFFER_VESA_MODE_105 - bool "1024x7686 256-color" - -config FRAMEBUFFER_VESA_MODE_106 - bool "1280x1024 16-color" - -config FRAMEBUFFER_VESA_MODE_107 - bool "1280x1024 256-color" - -config FRAMEBUFFER_VESA_MODE_108 - bool "80x60 text" - -config FRAMEBUFFER_VESA_MODE_109 - bool "132x25 text" - -config FRAMEBUFFER_VESA_MODE_10A - bool "132x43 text" - -config FRAMEBUFFER_VESA_MODE_10B - bool "132x50 text" - -config FRAMEBUFFER_VESA_MODE_10C - bool "132x60 text" - -config FRAMEBUFFER_VESA_MODE_10D - bool "320x200 32k-color (1:5:5:5)" - -config FRAMEBUFFER_VESA_MODE_10E - bool "320x200 64k-color (5:6:5)" - -config FRAMEBUFFER_VESA_MODE_10F - bool "320x200 16.8M-color (8:8:8)" - -config FRAMEBUFFER_VESA_MODE_110 - bool "640x480 32k-color (1:5:5:5)" - -config FRAMEBUFFER_VESA_MODE_111 - bool "640x480 64k-color (5:6:5)" - -config FRAMEBUFFER_VESA_MODE_112 - bool "640x480 16.8M-color (8:8:8)" - -config FRAMEBUFFER_VESA_MODE_113 - bool "800x600 32k-color (1:5:5:5)" - -config FRAMEBUFFER_VESA_MODE_114 - bool "800x600 64k-color (5:6:5)" - -config FRAMEBUFFER_VESA_MODE_115 - bool "800x600 16.8M-color (8:8:8)" - -config FRAMEBUFFER_VESA_MODE_116 - bool "1024x768 32k-color (1:5:5:5)" - -config FRAMEBUFFER_VESA_MODE_117 - bool "1024x768 64k-color (5:6:5)" - -config FRAMEBUFFER_VESA_MODE_118 - bool "1024x768 16.8M-color (8:8:8)" - -config FRAMEBUFFER_VESA_MODE_119 - bool "1280x1024 32k-color (1:5:5:5)" - -config FRAMEBUFFER_VESA_MODE_11A - bool "1280x1024 64k-color (5:6:5)" - -config FRAMEBUFFER_VESA_MODE_11B - bool "1280x1024 16.8M-color (8:8:8)" - -endchoice - -# Map the config names to an integer (KB). -config FRAMEBUFFER_VESA_MODE - hex - default 0x100 if FRAMEBUFFER_VESA_MODE_100 - default 0x101 if FRAMEBUFFER_VESA_MODE_101 - default 0x102 if FRAMEBUFFER_VESA_MODE_102 - default 0x103 if FRAMEBUFFER_VESA_MODE_103 - default 0x104 if FRAMEBUFFER_VESA_MODE_104 - default 0x105 if FRAMEBUFFER_VESA_MODE_105 - default 0x106 if FRAMEBUFFER_VESA_MODE_106 - default 0x107 if FRAMEBUFFER_VESA_MODE_107 - default 0x108 if FRAMEBUFFER_VESA_MODE_108 - default 0x109 if FRAMEBUFFER_VESA_MODE_109 - default 0x10A if FRAMEBUFFER_VESA_MODE_10A - default 0x10B if FRAMEBUFFER_VESA_MODE_10B - default 0x10C if FRAMEBUFFER_VESA_MODE_10C - default 0x10D if FRAMEBUFFER_VESA_MODE_10D - default 0x10E if FRAMEBUFFER_VESA_MODE_10E - default 0x10F if FRAMEBUFFER_VESA_MODE_10F - default 0x110 if FRAMEBUFFER_VESA_MODE_110 - default 0x111 if FRAMEBUFFER_VESA_MODE_111 - default 0x112 if FRAMEBUFFER_VESA_MODE_112 - default 0x113 if FRAMEBUFFER_VESA_MODE_113 - default 0x114 if FRAMEBUFFER_VESA_MODE_114 - default 0x115 if FRAMEBUFFER_VESA_MODE_115 - default 0x116 if FRAMEBUFFER_VESA_MODE_116 - default 0x117 if FRAMEBUFFER_VESA_MODE_117 - default 0x118 if FRAMEBUFFER_VESA_MODE_118 - default 0x119 if FRAMEBUFFER_VESA_MODE_119 - default 0x11A if FRAMEBUFFER_VESA_MODE_11A - default 0x11B if FRAMEBUFFER_VESA_MODE_11B - -config FRAMEBUFFER_KEEP_VESA_MODE - prompt "Keep VESA framebuffer" - bool - depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE - help - This option keeps the framebuffer mode set after coreboot finishes - execution. If this option is enabled, coreboot will pass a - framebuffer entry in its coreboot table and the payload will need a - framebuffer driver. If this option is disabled, coreboot will switch - back to text mode before handing control to a payload. - -config BOOTSPLASH - prompt "Show graphical bootsplash" - bool - depends on FRAMEBUFFER_SET_VESA_MODE - help - This option shows a graphical bootsplash screen. The grapics are - loaded from the CBFS file bootsplash.jpg. - -config BOOTSPLASH_FILE - string "Bootsplash path and filename" - depends on BOOTSPLASH - default "bootsplash.jpg" - help - The path and filename of the file to use as graphical bootsplash - screen. The file format has to be jpg. -endmenu - menu "Debugging" # TODO: Better help text and detailed instructions. @@ -886,14 +654,11 @@ config DEBUG_SMM_RELOCATION If unsure, say N. -config DEBUG_MALLOC - def_bool n - # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional # printk(BIOS_DEBUG, ...) calls. -if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 config DEBUG_MALLOC - bool "Output verbose malloc debug messages" + prompt "Output verbose malloc debug messages" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 + bool default n help This option enables additional malloc related debug messages. @@ -901,16 +666,12 @@ config DEBUG_MALLOC Note: This option will increase the size of the coreboot image. If unsure, say N. -endif - -config DEBUG_ACPI - def_bool n # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional # printk(BIOS_DEBUG, ...) calls. -if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 config DEBUG_ACPI - bool "Output verbose ACPI debug messages" + prompt "Output verbose ACPI debug messages" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 + bool default n help This option enables additional ACPI related debug messages. @@ -918,17 +679,12 @@ config DEBUG_ACPI Note: This option will slightly increase the size of the coreboot image. If unsure, say N. -endif - -config REALMODE_DEBUG - def_bool n - depends on PCI_OPTION_ROM_RUN_REALMODE -if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional # printk(BIOS_DEBUG, ...) calls. config REALMODE_DEBUG - bool "Enable debug messages for option ROM execution" + prompt "Enable debug messages for option ROM execution" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 + bool default n depends on PCI_OPTION_ROM_RUN_REALMODE help @@ -937,7 +693,6 @@ config REALMODE_DEBUG Note: This option will increase the time to emulate a ROM. If unsure, say N. -endif config X86EMU_DEBUG bool "Output verbose x86emu debug messages" @@ -1119,10 +874,6 @@ config TRACE are omitted from trace to have good looking console dumps. endmenu -config LIFT_BSP_APIC_ID - bool - default n - # These probably belong somewhere else, but they are needed somewhere. config AP_CODE_IN_CAR bool diff --git a/src/cpu/amd/model_10xxx/Kconfig b/src/cpu/amd/model_10xxx/Kconfig index 0890771e34..0254cf239c 100644 --- a/src/cpu/amd/model_10xxx/Kconfig +++ b/src/cpu/amd/model_10xxx/Kconfig @@ -30,6 +30,10 @@ config SET_FIDVID bool default y +config LIFT_BSP_APIC_ID + bool + default n + if SET_FIDVID config SET_FIDVID_DEBUG bool diff --git a/src/cpu/amd/model_fxx/Kconfig b/src/cpu/amd/model_fxx/Kconfig index 0afc4b0f4c..28beacfa45 100644 --- a/src/cpu/amd/model_fxx/Kconfig +++ b/src/cpu/amd/model_fxx/Kconfig @@ -10,6 +10,10 @@ config UDELAY_IO bool default n +config LIFT_BSP_APIC_ID + bool + default n + config SET_FIDVID bool default n diff --git a/src/devices/Kconfig b/src/devices/Kconfig index 04f6f643f0..72e8a53aa0 100644 --- a/src/devices/Kconfig +++ b/src/devices/Kconfig @@ -18,6 +18,7 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +menu "Devices" # TODO: Explain differences (if any) for onboard cards. config VGA_ROM_RUN bool "Run VGA Option ROMs" @@ -211,3 +212,228 @@ config PCIEXP_ASPM default n help Detect and enable ASPM on PCIe links. + +config PCI_BUS_SEGN_BITS + int + default 0 +endmenu + +menu "VGA BIOS" + +config VGA_BIOS + bool "Add a VGA BIOS image" + help + Select this option if you have a VGA BIOS image that you would + like to add to your ROM. + + You will be able to specify the location and file name of the + image later. + +config VGA_BIOS_FILE + string "VGA BIOS path and filename" + depends on VGA_BIOS + default "vgabios.bin" + help + The path and filename of the file to use as VGA BIOS. + +config VGA_BIOS_ID + string "VGA device PCI IDs" + depends on VGA_BIOS + default "1106,3230" + help + The comma-separated PCI vendor and device ID that would associate + your VGA BIOS to your video card. + + Example: 1106,3230 + + In the above example 1106 is the PCI vendor ID (in hex, but without + the "0x" prefix) and 3230 specifies the PCI device ID of the + video card (also in hex, without "0x" prefix). + +config INTEL_MBI + bool "Add an MBI image" + depends on NORTHBRIDGE_INTEL_I82830 + help + Select this option if you have an Intel MBI image that you would + like to add to your ROM. + + You will be able to specify the location and file name of the + image later. + +config MBI_FILE + string "Intel MBI path and filename" + depends on INTEL_MBI + default "mbi.bin" + help + The path and filename of the file to use as VGA BIOS. + +endmenu + +menu "Display" + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + +config FRAMEBUFFER_SET_VESA_MODE + prompt "Set VESA framebuffer mode" + bool + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + help + Set VESA framebuffer mode (needed for bootsplash) + +choice + prompt "VESA framebuffer video mode" + default FRAMEBUFFER_VESA_MODE_117 + depends on FRAMEBUFFER_SET_VESA_MODE + help + This option sets the resolution used for the coreboot framebuffer (and + bootsplash screen). + +config FRAMEBUFFER_VESA_MODE_100 + bool "640x400 256-color" + +config FRAMEBUFFER_VESA_MODE_101 + bool "640x480 256-color" + +config FRAMEBUFFER_VESA_MODE_102 + bool "800x600 16-color" + +config FRAMEBUFFER_VESA_MODE_103 + bool "800x600 256-color" + +config FRAMEBUFFER_VESA_MODE_104 + bool "1024x768 16-color" + +config FRAMEBUFFER_VESA_MODE_105 + bool "1024x7686 256-color" + +config FRAMEBUFFER_VESA_MODE_106 + bool "1280x1024 16-color" + +config FRAMEBUFFER_VESA_MODE_107 + bool "1280x1024 256-color" + +config FRAMEBUFFER_VESA_MODE_108 + bool "80x60 text" + +config FRAMEBUFFER_VESA_MODE_109 + bool "132x25 text" + +config FRAMEBUFFER_VESA_MODE_10A + bool "132x43 text" + +config FRAMEBUFFER_VESA_MODE_10B + bool "132x50 text" + +config FRAMEBUFFER_VESA_MODE_10C + bool "132x60 text" + +config FRAMEBUFFER_VESA_MODE_10D + bool "320x200 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_10E + bool "320x200 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_10F + bool "320x200 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_110 + bool "640x480 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_111 + bool "640x480 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_112 + bool "640x480 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_113 + bool "800x600 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_114 + bool "800x600 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_115 + bool "800x600 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_116 + bool "1024x768 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_117 + bool "1024x768 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_118 + bool "1024x768 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_119 + bool "1280x1024 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_11A + bool "1280x1024 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_11B + bool "1280x1024 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_USER + bool "Manually select VESA mode" + +endchoice + +# Map the config names to an integer (KB). +config FRAMEBUFFER_VESA_MODE + prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER + hex + default 0x100 if FRAMEBUFFER_VESA_MODE_100 + default 0x101 if FRAMEBUFFER_VESA_MODE_101 + default 0x102 if FRAMEBUFFER_VESA_MODE_102 + default 0x103 if FRAMEBUFFER_VESA_MODE_103 + default 0x104 if FRAMEBUFFER_VESA_MODE_104 + default 0x105 if FRAMEBUFFER_VESA_MODE_105 + default 0x106 if FRAMEBUFFER_VESA_MODE_106 + default 0x107 if FRAMEBUFFER_VESA_MODE_107 + default 0x108 if FRAMEBUFFER_VESA_MODE_108 + default 0x109 if FRAMEBUFFER_VESA_MODE_109 + default 0x10A if FRAMEBUFFER_VESA_MODE_10A + default 0x10B if FRAMEBUFFER_VESA_MODE_10B + default 0x10C if FRAMEBUFFER_VESA_MODE_10C + default 0x10D if FRAMEBUFFER_VESA_MODE_10D + default 0x10E if FRAMEBUFFER_VESA_MODE_10E + default 0x10F if FRAMEBUFFER_VESA_MODE_10F + default 0x110 if FRAMEBUFFER_VESA_MODE_110 + default 0x111 if FRAMEBUFFER_VESA_MODE_111 + default 0x112 if FRAMEBUFFER_VESA_MODE_112 + default 0x113 if FRAMEBUFFER_VESA_MODE_113 + default 0x114 if FRAMEBUFFER_VESA_MODE_114 + default 0x115 if FRAMEBUFFER_VESA_MODE_115 + default 0x116 if FRAMEBUFFER_VESA_MODE_116 + default 0x117 if FRAMEBUFFER_VESA_MODE_117 + default 0x118 if FRAMEBUFFER_VESA_MODE_118 + default 0x119 if FRAMEBUFFER_VESA_MODE_119 + default 0x11A if FRAMEBUFFER_VESA_MODE_11A + default 0x11B if FRAMEBUFFER_VESA_MODE_11B + default 0x117 if FRAMEBUFFER_VESA_MODE_USER + +config FRAMEBUFFER_KEEP_VESA_MODE + prompt "Keep VESA framebuffer" + bool + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + help + This option keeps the framebuffer mode set after coreboot finishes + execution. If this option is enabled, coreboot will pass a + framebuffer entry in its coreboot table and the payload will need a + framebuffer driver. If this option is disabled, coreboot will switch + back to text mode before handing control to a payload. + +config BOOTSPLASH + prompt "Show graphical bootsplash" + bool + depends on FRAMEBUFFER_SET_VESA_MODE + help + This option shows a graphical bootsplash screen. The grapics are + loaded from the CBFS file bootsplash.jpg. + +config BOOTSPLASH_FILE + string "Bootsplash path and filename" + depends on BOOTSPLASH + default "bootsplash.jpg" + help + The path and filename of the file to use as graphical bootsplash + screen. The file format has to be jpg. +endmenu diff --git a/src/drivers/pc80/Kconfig b/src/drivers/pc80/Kconfig index e82045523f..3c8fd8c6cd 100644 --- a/src/drivers/pc80/Kconfig +++ b/src/drivers/pc80/Kconfig @@ -14,3 +14,11 @@ config DRIVERS_PS2_KEYBOARD If you know you will only use a payload which does not require this option, then you can say N here to speed up boot time. Otherwise say Y. + +config TPM + bool + default n + help + Enable this option to enable TPM support in coreboot. + + If unsure, say N. |