diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/advansus/a785e-i/get_bus_conf.c | 28 | ||||
| -rw-r--r-- | src/mainboard/amd/bimini_fam10/get_bus_conf.c | 29 | ||||
| -rw-r--r-- | src/mainboard/amd/mahogany_fam10/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/amd/tilapia_fam10/get_bus_conf.c | 18 | ||||
| -rw-r--r-- | src/mainboard/asus/kcma-d8/get_bus_conf.c | 28 | ||||
| -rw-r--r-- | src/mainboard/asus/kgpe-d16/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/asus/m4a78-em/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/asus/m4a785-m/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/asus/m5a88-v/get_bus_conf.c | 28 | ||||
| -rw-r--r-- | src/mainboard/avalue/eax-785e/get_bus_conf.c | 28 | ||||
| -rw-r--r-- | src/mainboard/gigabyte/ma785gm/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/gigabyte/ma785gmt/get_bus_conf.c | 26 | ||||
| -rw-r--r-- | src/mainboard/gigabyte/ma78gm/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c | 26 | ||||
| -rw-r--r-- | src/mainboard/jetway/pa78vm5/get_bus_conf.c | 27 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c | 27 |
16 files changed, 16 insertions, 411 deletions
diff --git a/src/mainboard/advansus/a785e-i/get_bus_conf.c b/src/mainboard/advansus/a785e-i/get_bus_conf.c index 598bef42d1..d21b500fa5 100644 --- a/src/mainboard/advansus/a785e-i/get_bus_conf.c +++ b/src/mainboard/advansus/a785e-i/get_bus_conf.c @@ -25,37 +25,11 @@ */ u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/amd/bimini_fam10/get_bus_conf.c b/src/mainboard/amd/bimini_fam10/get_bus_conf.c index a03714d5a2..799455f620 100644 --- a/src/mainboard/amd/bimini_fam10/get_bus_conf.c +++ b/src/mainboard/amd/bimini_fam10/get_bus_conf.c @@ -25,41 +25,14 @@ */ u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - - void get_bus_conf(void) { u32 apicid_base; - int i; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff; /* I/O APICs: APIC ID Version State Address */ diff --git a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c +++ b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c index 88b7bf115e..0f30f165cf 100644 --- a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c +++ b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c @@ -27,15 +27,6 @@ u32 apicid_sb700; /* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* * HT Chain device num, actually it is unit id base of every ht device in chain, * assume every chain only have 4 ht device at most */ @@ -47,15 +38,8 @@ u32 hcdnx[] = { void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/asus/kcma-d8/get_bus_conf.c b/src/mainboard/asus/kcma-d8/get_bus_conf.c index 03a8415cfc..3a9eb9e346 100644 --- a/src/mainboard/asus/kcma-d8/get_bus_conf.c +++ b/src/mainboard/asus/kcma-d8/get_bus_conf.c @@ -27,38 +27,12 @@ */ u32 apicid_sp5100; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff; diff --git a/src/mainboard/asus/kgpe-d16/get_bus_conf.c b/src/mainboard/asus/kgpe-d16/get_bus_conf.c index 03a8415cfc..903e7e1e31 100644 --- a/src/mainboard/asus/kgpe-d16/get_bus_conf.c +++ b/src/mainboard/asus/kgpe-d16/get_bus_conf.c @@ -27,37 +27,12 @@ */ u32 apicid_sp5100; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/asus/m4a78-em/get_bus_conf.c b/src/mainboard/asus/m4a78-em/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/asus/m4a78-em/get_bus_conf.c +++ b/src/mainboard/asus/m4a78-em/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/asus/m4a785-m/get_bus_conf.c b/src/mainboard/asus/m4a785-m/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/asus/m4a785-m/get_bus_conf.c +++ b/src/mainboard/asus/m4a785-m/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c index 598bef42d1..d21b500fa5 100644 --- a/src/mainboard/asus/m5a88-v/get_bus_conf.c +++ b/src/mainboard/asus/m5a88-v/get_bus_conf.c @@ -25,37 +25,11 @@ */ u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c index 598bef42d1..d21b500fa5 100644 --- a/src/mainboard/avalue/eax-785e/get_bus_conf.c +++ b/src/mainboard/avalue/eax-785e/get_bus_conf.c @@ -25,37 +25,11 @@ */ u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c index 541b45f656..0de0760637 100644 --- a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c @@ -26,36 +26,12 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff; diff --git a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c index 88b7bf115e..942941d85f 100644 --- a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c +++ b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c @@ -26,36 +26,12 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/jetway/pa78vm5/get_bus_conf.c b/src/mainboard/jetway/pa78vm5/get_bus_conf.c index 88b7bf115e..ade9c79e00 100644 --- a/src/mainboard/jetway/pa78vm5/get_bus_conf.c +++ b/src/mainboard/jetway/pa78vm5/get_bus_conf.c @@ -26,36 +26,11 @@ */ u32 apicid_sb700; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - void get_bus_conf(void) { u32 apicid_base; - int i; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); diff --git a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c index b36008118f..7153f79df2 100644 --- a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c @@ -27,38 +27,13 @@ u8 bus_sr5650[14]; u32 apicid_sp5100; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - - void get_bus_conf(void) { u32 apicid_base; struct device *dev; int i; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); + get_default_pci1234(1); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); |