summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/drivers/wwan/fm/Kconfig11
-rw-r--r--src/drivers/wwan/fm/Makefile.inc1
-rw-r--r--src/drivers/wwan/fm/acpi_fm350gl.c257
-rw-r--r--src/drivers/wwan/fm/chip.h25
4 files changed, 294 insertions, 0 deletions
diff --git a/src/drivers/wwan/fm/Kconfig b/src/drivers/wwan/fm/Kconfig
new file mode 100644
index 0000000000..bed3b2e5ac
--- /dev/null
+++ b/src/drivers/wwan/fm/Kconfig
@@ -0,0 +1,11 @@
+config DRIVERS_WWAN_FM350GL
+ bool
+ default n
+ depends on SOC_INTEL_COMMON_BLOCK_PCIE_RTD3
+ help
+ This driver is for Fibocom FM350-GL PCIe 5G WWAN.
+ When enabled, this driver will add support for ACPI controlled
+ WWAN using GPIOs for power/reset control of the device.
+ This driver depends on rtd3 driver code to build as it needs to
+ point to the rtd3 chip on the same parent for the methods provided
+ only for the same root port.
diff --git a/src/drivers/wwan/fm/Makefile.inc b/src/drivers/wwan/fm/Makefile.inc
new file mode 100644
index 0000000000..8074a0869a
--- /dev/null
+++ b/src/drivers/wwan/fm/Makefile.inc
@@ -0,0 +1 @@
+ramstage-$(CONFIG_DRIVERS_WWAN_FM350GL) += acpi_fm350gl.c
diff --git a/src/drivers/wwan/fm/acpi_fm350gl.c b/src/drivers/wwan/fm/acpi_fm350gl.c
new file mode 100644
index 0000000000..15d0ecc859
--- /dev/null
+++ b/src/drivers/wwan/fm/acpi_fm350gl.c
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <acpi/acpigen.h>
+#include <acpi/acpi_device.h>
+#include "chip.h"
+#include "soc/intel/common/block/pcie/rtd3/chip.h"
+
+/* FCPO# to RESET# delay time during WWAN ON */
+#define FM350GL_TN2B 20
+/* RESET# to PERST# delay time during WWAN ON */
+#define FM350GL_TB2R 80
+/* The delay between de-assertion of PERST# to change of PDS state from 0 to 1 during WWAN ON */
+#define FM350GL_TR2P 0
+/* RESET# to FCPO# delay time during WWAN OFF */
+#define FM350GL_TB2F 10
+/* Time to allow the WWAN module to fully discharge any residual voltages before FCPO# could be
+ de-asserted again. */
+#define FM350GL_TFDI 500
+/* The delay between assertion and de-assertion RESET# during FLDR */
+#define FM350GL_TBTG 10
+/* The delay between de-assertion of RESET# and change of PDS state from 0 to 1 after FLDR */
+#define FM350GL_TBTP 170
+/* PERST# to RESET# delay time during WWAN OFF */
+#define FM350GL_TR2B 10
+/* 20s HW initialization needed after de-assertion of PERST#
+ However, it is not required and is not proper place to ensure HW initialization in ACPI. The
+ delay here is to ensure the following reset or RTD3 _OFF method won't be called immediately.
+ */
+#define FM350GL_TIME_HW_INIT 100
+
+enum reset_type {
+ RESET_TYPE_WARM = 0,
+ RESET_TYPE_COLD = 1
+};
+
+/*
+ * Returns the RTD3 PM methods requested and available to the device.
+ */
+static enum acpi_pcie_rp_pm_emit
+wwan_fm350gl_get_rtd3_method_support(const struct drivers_wwan_fm_config *config)
+{
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
+
+ rtd3_config = config_of(config->rtd3dev);
+
+ return rtd3_config->ext_pm_support;
+}
+
+/*
+ * Generate first half reset flow (FHRF) method.
+ * Arg0 = RESET_TYPE_WARM: warm reset
+ * Arg0 = 1RESET_TYPE_COLD: cold reset
+ */
+static void wwan_fm350gl_acpi_method_fhrf(const struct device *parent_dev,
+ const struct drivers_wwan_fm_config *config)
+{
+ acpigen_write_method_serialized("FHRF", 1);
+ {
+ /* LOCAL0 = PERST# */
+ acpigen_get_tx_gpio(&config->perst_gpio);
+ acpigen_write_if_lequal_op_int(LOCAL0_OP, 0);
+ {
+ if (wwan_fm350gl_get_rtd3_method_support(config) |
+ ACPI_PCIE_RP_EMIT_L23) {
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev,
+ "DL23"));
+ }
+ /* assert PERST# pin */
+ acpigen_enable_tx_gpio(&config->perst_gpio);
+ }
+ acpigen_write_if_end(); /* If */
+ acpigen_write_sleep(FM350GL_TR2B);
+ /* assert RESET# pin */
+ acpigen_enable_tx_gpio(&config->reset_gpio);
+ /* warm reset */
+ acpigen_write_if_lequal_op_int(ARG0_OP, RESET_TYPE_WARM);
+ {
+ acpigen_write_sleep(FM350GL_TBTG);
+ }
+ /* cold reset */
+ acpigen_write_else();
+ {
+ acpigen_write_if_lequal_op_int(ARG0_OP, RESET_TYPE_COLD);
+ {
+ /* disable source clock */
+ if (wwan_fm350gl_get_rtd3_method_support(config) |
+ ACPI_PCIE_RP_EMIT_SRCK) {
+ acpigen_emit_namestring(acpi_device_path_join(
+ parent_dev, "SRCK"));
+ acpigen_emit_byte(ZERO_OP);
+ }
+ acpigen_write_sleep(FM350GL_TB2F);
+ /* assert FCPO# pin */
+ acpigen_enable_tx_gpio(&config->fcpo_gpio);
+ acpigen_write_sleep(FM350GL_TFDI);
+ }
+ acpigen_write_if_end(); /* If */
+ }
+ acpigen_pop_len(); /* Else */
+ }
+ acpigen_write_method_end(); /* Method */
+}
+
+/*
+ * Generate second half reset flow (SHRF) method.
+ */
+static void wwan_fm350gl_acpi_method_shrf(const struct device *parent_dev,
+ const struct drivers_wwan_fm_config *config)
+{
+ acpigen_write_method_serialized("SHRF", 0);
+ {
+ /* call rtd3 method to Disable ModPHY Power Gating. */
+ if (wwan_fm350gl_get_rtd3_method_support(config) |
+ ACPI_PCIE_RP_EMIT_PSD0) {
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev,
+ "PSD0"));
+ }
+ /* call rtd3 method to Enable SRC Clock. */
+ if (wwan_fm350gl_get_rtd3_method_support(config) |
+ ACPI_PCIE_RP_EMIT_SRCK) {
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev,
+ "SRCK"));
+ acpigen_emit_byte(ONE_OP);
+ }
+ /* De-assert FCPO# GPIO. */
+ acpigen_disable_tx_gpio(&config->fcpo_gpio);
+ acpigen_write_sleep(FM350GL_TN2B);
+ /* De-assert RESET# GPIO. */
+ acpigen_disable_tx_gpio(&config->reset_gpio);
+ acpigen_write_sleep(FM350GL_TB2R);
+ /* De-assert PERST# GPIO. */
+ acpigen_disable_tx_gpio(&config->perst_gpio);
+ /* Call rtd3 method to trigger L2/L3 ready exit flow in root port */
+ if (wwan_fm350gl_get_rtd3_method_support(config) |
+ ACPI_PCIE_RP_EMIT_L23) {
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev,
+ "L23D"));
+ }
+ acpigen_write_sleep(FM350GL_TIME_HW_INIT);
+ }
+ acpigen_write_method_end(); /* Method */
+}
+
+/*
+ * Generate _RST method. This is to perform a soft reset. It is added under
+ * PXSX. This is called during device driver removal.
+ */
+static void wwan_fm350gl_acpi_method_rst(const struct device *parent_dev,
+ const struct drivers_wwan_fm_config *config)
+{
+ acpigen_write_method_serialized("_RST", 0);
+ {
+ /* Perform 1st Half of FLDR Flow for soft reset: FHRF(0) */
+ acpigen_emit_namestring("FHRF");
+ acpigen_emit_byte(RESET_TYPE_WARM);
+ /* Perform 2nd Half of FLDR Flow: SHRF() */
+ acpigen_emit_namestring("SHRF");
+ /* Indicates that the following _Off will be skipped. */
+ acpigen_emit_byte(INCREMENT_OP);
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev, "RTD3.OFSK"));
+ }
+ acpigen_write_method_end(); /* Method */
+}
+
+/*
+ * Generate _RST method. This is to perform a cold reset. This reset will be
+ * included under PXSX.MRST. This method is used during device firmware update.
+ */
+static void wwan_fm350gl_acpi_method_mrst_rst(const struct device *parent_dev,
+ const struct drivers_wwan_fm_config *config)
+{
+ acpigen_write_method_serialized("_RST", 0);
+ {
+ /* Perform 1st Half of FLDR Flow for cold reset: FHRF (1) */
+ acpigen_emit_namestring("FHRF");
+ acpigen_emit_byte(RESET_TYPE_COLD);
+ /* Perform 2nd Half of FLDR Flow: SHRF () */
+ acpigen_emit_namestring("SHRF");
+ /* Indicate kernel ACPI PM to skip _off RTD3 after reset at the end of
+ driver removal */
+ acpigen_emit_byte(INCREMENT_OP);
+ acpigen_emit_namestring(acpi_device_path_join(parent_dev, "RTD3.OFSK"));
+ }
+ acpigen_write_method_end(); /* Method */
+}
+
+static const char *wwan_fm350gl_acpi_name(const struct device *dev)
+{
+ /* Attached device name must be "PXSX" for the Linux Kernel to recognize it. */
+ return "PXSX";
+}
+
+static void wwan_fm350gl_acpi_fill_ssdt(const struct device *dev)
+{
+ const struct drivers_wwan_fm_config *config = config_of(dev);
+ const struct device *parent = dev->bus->dev;
+ const char *scope = acpi_device_path(parent);
+
+ if (!is_dev_enabled(parent)) {
+ printk(BIOS_ERR, "%s: root port not enabled\n", __func__);
+ return;
+ }
+ if (!scope) {
+ printk(BIOS_ERR, "%s: root port scope not found\n", __func__);
+ return;
+ }
+ if (!config->fcpo_gpio.pin_count && !config->reset_gpio.pin_count &&
+ !config->perst_gpio.pin_count) {
+ printk(BIOS_ERR, "%s: FCPO, RESET, PERST GPIO required for %s.\n",
+ __func__, scope);
+ return;
+ }
+ printk(BIOS_INFO, "%s: Enable WWAN for %s (%s)\n", scope, dev_path(parent),
+ config->desc ?: dev->chip_ops->name);
+ acpigen_write_scope(scope);
+ {
+ acpigen_write_device(wwan_fm350gl_acpi_name(dev));
+ {
+ acpigen_write_ADR(0);
+ if (config->name)
+ acpigen_write_name_string("_DDN", config->name);
+ if (config->desc)
+ acpigen_write_name_unicode("_STR", config->desc);
+ wwan_fm350gl_acpi_method_fhrf(parent, config);
+ wwan_fm350gl_acpi_method_shrf(parent, config);
+ wwan_fm350gl_acpi_method_rst(parent, config);
+ /* NOTE: the 5G driver will call MRST._RST to trigger a cold reset
+ * during firmware update.
+ */
+ acpigen_write_device("MRST");
+ {
+ acpigen_write_ADR(0);
+ wwan_fm350gl_acpi_method_mrst_rst(parent, config);
+ }
+ acpigen_write_device_end(); /* Device */
+ }
+ acpigen_write_device_end(); /* Device */
+ }
+ acpigen_write_scope_end(); /* Scope */
+}
+
+static struct device_operations wwan_fm350gl_ops = {
+ .read_resources = noop_read_resources,
+ .set_resources = noop_set_resources,
+ .acpi_fill_ssdt = wwan_fm350gl_acpi_fill_ssdt,
+ .acpi_name = wwan_fm350gl_acpi_name,
+};
+
+static void wwan_fm350gl_acpi_enable(struct device *dev)
+{
+ dev->ops = &wwan_fm350gl_ops;
+}
+
+struct chip_operations drivers_wwan_fm_ops = {
+ CHIP_NAME("Fibocom FM-350-GL")
+ .enable_dev = wwan_fm350gl_acpi_enable
+};
diff --git a/src/drivers/wwan/fm/chip.h b/src/drivers/wwan/fm/chip.h
new file mode 100644
index 0000000000..635178bd16
--- /dev/null
+++ b/src/drivers/wwan/fm/chip.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __DRIVERS_WWAN_FM_CHIP_H__
+#define __DRIVERS_WWAN_FM_CHIP_H__
+
+struct drivers_wwan_fm_config {
+ const char *name;
+ const char *desc;
+ /* GPIO used for FULL_CARD_POWER_OFF# */
+ struct acpi_gpio fcpo_gpio;
+
+ /* GPIO used for RESET# */
+ struct acpi_gpio reset_gpio;
+
+ /* GPIO used for PERST# */
+ struct acpi_gpio perst_gpio;
+
+ /* GPIO used for wake */
+ struct acpi_gpio wake_gpio;
+
+ /* Pointer to the corresponding RTD3 */
+ DEVTREE_CONST struct device *rtd3dev;
+};
+
+#endif /* __DRIVERS_WWAN_FM_CHIP_H__ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 05:30:12 +0000