summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/amd/dbm690t/Config.lb133
-rw-r--r--src/mainboard/amd/dbm690t/Options.lb25
-rw-r--r--src/mainboard/amd/dbm690t/cache_as_ram_auto.c3
-rw-r--r--src/mainboard/amd/dbm690t/chip.h6
-rw-r--r--src/mainboard/amd/dbm690t/fadt.c295
-rw-r--r--src/mainboard/amd/dbm690t/get_bus_conf.c18
-rw-r--r--src/mainboard/amd/dbm690t/irq_tables.c2
-rw-r--r--src/mainboard/amd/dbm690t/mainboard.c165
-rw-r--r--src/mainboard/amd/dbm690t/mptable.c16
9 files changed, 455 insertions, 208 deletions
diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
index b589903806..c612427ab4 100644
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ b/src/mainboard/amd/dbm690t/Config.lb
@@ -54,7 +54,7 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
@@ -65,9 +65,20 @@ driver mainboard.o
#dir /drivers/si/3114
if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE
+if HAVE_PIRQ_TABLE
object get_bus_conf.o
- object irq_tables.o
+ object irq_tables.o
+end
+
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ object fadt.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/acpi/*.asl"
+ action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/acpi/dsdt.asl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
end
#object reset.o
@@ -78,14 +89,14 @@ if USE_DCACHE_RAM
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -g -dA -fverbose-asm -c -S -o $@"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -g -dA -fverbose-asm -c -S -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
@@ -112,7 +123,7 @@ end
##
## Build our reset vector (This is where coreboot is entered)
##
-if USE_FALLBACK_IMAGE
+if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
@@ -134,7 +145,7 @@ if USE_DCACHE_RAM
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
@@ -165,7 +176,7 @@ if USE_DCACHE_RAM
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
@@ -177,7 +188,7 @@ end
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define vga_rom_address = 0xfff0000
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
@@ -193,7 +204,7 @@ chip northbridge/amd/amdk8/root_complex
end
device pci_domain 0 on
chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge
+ device pci 18.0 on # southbridge
chip southbridge/amd/rs690
device pci 0.0 on end # HT 0x7910
device pci 1.0 on # Internal Graphics P2P bridge 0x7912
@@ -221,13 +232,13 @@ chip northbridge/amd/amdk8/root_complex
register "gfx_link_width" = "0"
end
chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
+ device pci 12.0 on end # SATA 0x4380
+ device pci 13.0 on end # USB 0x4387
+ device pci 13.1 on end # USB 0x4388
+ device pci 13.2 on end # USB 0x4389
+ device pci 13.3 on end # USB 0x438a
+ device pci 13.4 on end # USB 0x438b
+ device pci 13.5 on end # USB 2 0x4386
device pci 14.0 on # SM 0x4385
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
@@ -242,49 +253,51 @@ chip northbridge/amd/amdk8/root_complex
device i2c 53 on end
end
end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x438d
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 off end # EC
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end #superio/ite/it8712f
- end #LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
+ device pci 14.1 on end # IDE 0x438c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x438d
+ chip superio/ite/it8712f
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 off end # EC
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off end # CIR
+ end #superio/ite/it8712f
+ end #LPC
+ device pci 14.4 on end # PCI 0x4384
+ device pci 14.5 on end # ACI 0x4382
+ device pci 14.6 on end # MCI 0x438e
register "ide0_enable" = "1"
register "sata0_enable" = "1"
register "hda_viddid" = "0x10ec0882"
diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb
index 631df26772..cf73999a4f 100644
--- a/src/mainboard/amd/dbm690t/Options.lb
+++ b/src/mainboard/amd/dbm690t/Options.lb
@@ -130,6 +130,9 @@ default IRQ_SLOT_COUNT=11
##
default HAVE_MP_TABLE=1
+## ACPI tables will be included
+default HAVE_ACPI_TABLES=1
+
##
## Build code to export a CMOS option table
##
@@ -232,7 +235,7 @@ default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
-###
+###
##
## The default compiler
@@ -242,7 +245,7 @@ default HOSTCC="gcc"
##
## Disable the gdb stub by default
-##
+##
default CONFIG_GDB_STUB=0
@@ -275,15 +278,15 @@ default TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
diff --git a/src/mainboard/amd/dbm690t/cache_as_ram_auto.c b/src/mainboard/amd/dbm690t/cache_as_ram_auto.c
index ac6e6c6bd7..b691223b6d 100644
--- a/src/mainboard/amd/dbm690t/cache_as_ram_auto.c
+++ b/src/mainboard/amd/dbm690t/cache_as_ram_auto.c
@@ -163,6 +163,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr_t msr;
struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
@@ -203,7 +204,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
+ /* show final fid and vid */
msr=rdmsr(0xc0010042);
printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/amd/dbm690t/chip.h b/src/mainboard/amd/dbm690t/chip.h
index e79d8b802e..786bc9f4e8 100644
--- a/src/mainboard/amd/dbm690t/chip.h
+++ b/src/mainboard/amd/dbm690t/chip.h
@@ -16,11 +16,11 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
+
extern struct chip_operations mainboard_amd_dbm690t_ops;
-struct mainboard_amd_dbm690t_config
+struct mainboard_amd_dbm690t_config
{
- unsigned long uma_size; /* How many UMA should be used in memory for TOP. */
+ u32 uma_size; /* How many UMA should be used in memory for TOP. */
};
diff --git a/src/mainboard/amd/dbm690t/fadt.c b/src/mainboard/amd/dbm690t/fadt.c
index d8491ada27..cf0a370be1 100644
--- a/src/mainboard/amd/dbm690t/fadt.c
+++ b/src/mainboard/amd/dbm690t/fadt.c
@@ -1,96 +1,199 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <string.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-
-
-
-/**
- * Create the Fixed ACPI Description Tables (FADT) for this board.
- The FADT defines various fixed hardware ACPI information vital to an ACPI-compatible
- OS, such as the base address for the following hardware registers blocks:
- PM1a_EVT_BLK, PM1b_EVT_BLK, PM1a_CNT_BLK, PM1b_CNT_BLK,
- PM2_CNT_BLK, PM_TMR_BLK, GPE0_BLK and GPE1_BLK.
- The FADT also has a pointer to the DSDT that contains the Differentiated Definition Block,
- which in turn provides variable information to an ACPI-compatible OS concerning the base
- system design.
-
- Not all blocks are necessary usualy only PM1a, PMTMR and GPE0 are used.
- */
-void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
-{
- acpi_header_t *header=&(fadt->header);
-
- printk_debug("pm_base: 0x%04x\n", pm_base);
-
- memset((void *)fadt,0,sizeof(acpi_fadt_t));
-
- /* Prepare the header */
- memcpy(header->signature,"FACP",4);
- header->length = 244;
- header->revision = 1;
- memcpy(header->oem_id,OEM_ID,6);
- memcpy(header->oem_table_id,"LXBACPI ",8);
- memcpy(header->asl_compiler_id,ASLC,4);
- header->asl_compiler_revision=0;
-
-
- fadt->firmware_ctrl=(u32)facs;
- fadt->dsdt= (u32)dsdt;
-
- /*
- 0: unspecified
- 1: desktop
- 2: mobile
- 3: workstation
- 4: enterprise server
- */
- fadt->preferred_pm_profile=0x01;
-
- /*
- System vector the SCI interrupt is wired to in 8259 mode.
- On systems that do not contain the 8259, this field contains the Global
- System interrupt number of the SCI interrupt. OSPM is required to treat
- the ACPI SCI interrupt as a sharable, level, active low interrupt.
- SB600 BDG 4.1
- */
- fadt->sci_int=4;
-
- /*
- System port address of the SMI Command Port. During ACPI OS initialization,
- OSPM can determine that the ACPI hardware registers are owned by SMI (by way
- of the SCI_EN bit), in which case the ACPI OS issues the ACPI_ENABLE command
- to the SMI_CMD port. The SCI_EN bit effectively tracks the ownership of the
- ACPI hardware registers. OSPM issues commands to the SMI_CMD port
- synchronously from the boot processor.
- This filed is reserved and must be zero on system that does not support
- System Management mode.
- */
- fadt->smi_cmd = 0;
-
- /*Those two fields are reserved and must be zero on systems that do not
- support Legacy Mode.*/
- fadt->acpi_enable = 0;
- fadt->acpi_disable = 0;
-
- fadt->s4bios_req = 0x0;
- fadt->pstate_cnt = 0x0;
-
-}
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+
+/*extern*/ u16 pm_base = 0x800;
+/* pm_base should be set in sb acpi */
+/* pm_base should be got from bar2 of rs690. Here I compact ACPI
+ * registers into 32 bytes limit.
+ * */
+
+#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */
+#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */
+#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ pm_base &= 0xFFFF;
+ printk_debug("pm_base: 0x%04x\n", pm_base);
+
+ /* Prepare the header */
+ memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (u32) facs;
+ fadt->dsdt = (u32) dsdt;
+ /* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+ fadt->preferred_pm_profile = 0x03;
+ fadt->sci_int = 9;
+ /* disable system management mode by setting to 0: */
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0xf0;
+ fadt->acpi_disable = 0xf1;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0xe2;
+
+ pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF);
+ pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+ pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF);
+ pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8);
+ pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF);
+ pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8);
+ pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF);
+ pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+ /* CpuControl is in \_PR.CPU0, 6 bytes */
+ pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF);
+ pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8);
+
+ pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */
+ pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */
+
+ pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF);
+ pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8);
+
+ pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses
+ * the contents of the PM registers at
+ * index 20-2B to decode ACPI I/O address.
+ * AcpiSmiEn & SmiCmdEn*/
+ pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */
+ outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */
+
+ fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
+ fadt->pm1b_evt_blk = 0x0000;
+ fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
+ fadt->pm1b_cnt_blk = 0x0000;
+ fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
+ fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
+ fadt->gpe0_blk = ACPI_GPE0_BLK;
+ fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+
+ fadt->cst_cnt = 0xe3;
+ fadt->p_lvl2_lat = 101;
+ fadt->p_lvl3_lat = 1001;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0; /* 0x7d these have to be */
+ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
+ fadt->century = 0; /* 0x7f to make rtc alrm work */
+ fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
+ fadt->flags = 0x0001c1a5;/* 0x25; */
+
+ fadt->res2 = 0;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (u32) facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (u32) dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 32;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/mainboard/amd/dbm690t/get_bus_conf.c b/src/mainboard/amd/dbm690t/get_bus_conf.c
index b776e21113..90c98a3ac7 100644
--- a/src/mainboard/amd/dbm690t/get_bus_conf.c
+++ b/src/mainboard/amd/dbm690t/get_bus_conf.c
@@ -29,20 +29,20 @@
#include <cpu/amd/amdk8_sysconf.h>
-/* Global variables for MB layouts and these will be shared by irqtable mptable
+/* Global variables for MB layouts and these will be shared by irqtable mptable
* and acpi_tables busnum is default.
*/
u8 bus_isa;
u8 bus_rs690[8];
u8 bus_sb600[2];
-unsigned long apicid_sb600;
+u32 apicid_sb600;
/*
* Here you only need to set value in pci1234 for HT-IO that could be installed or not
* You may need to preset pci1234 for HTIO board,
* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
*/
-unsigned long pci1234x[] = {
+u32 pci1234x[] = {
0x0000ff0,
};
@@ -50,22 +50,22 @@ unsigned long pci1234x[] = {
* HT Chain device num, actually it is unit id base of every ht device in chain,
* assume every chain only have 4 ht device at most
*/
-unsigned long hcdnx[] = {
+u32 hcdnx[] = {
0x20202020,
};
-unsigned long bus_type[256];
+u32 bus_type[256];
-unsigned long sbdn_rs690;
-unsigned long sbdn_sb600;
+u32 sbdn_rs690;
+u32 sbdn_sb600;
extern void get_sblk_pci1234(void);
-static unsigned long get_bus_conf_done = 0;
+static u32 get_bus_conf_done = 0;
void get_bus_conf(void)
{
- unsigned long apicid_base;
+ u32 apicid_base;
device_t dev;
int i, j;
diff --git a/src/mainboard/amd/dbm690t/irq_tables.c b/src/mainboard/amd/dbm690t/irq_tables.c
index 730a88a92d..7ef8d73230 100644
--- a/src/mainboard/amd/dbm690t/irq_tables.c
+++ b/src/mainboard/amd/dbm690t/irq_tables.c
@@ -17,7 +17,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c
index d87081df8f..9f0c9398cf 100644
--- a/src/mainboard/amd/dbm690t/mainboard.c
+++ b/src/mainboard/amd/dbm690t/mainboard.c
@@ -19,12 +19,25 @@
#include <console/console.h>
#include <device/device.h>
+#include <device/pci.h>
#include <arch/io.h>
#include <boot/coreboot_tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
#include "chip.h"
+#define ADT7461_ADDRESS 0x4C
+#define SMBUS_IO_BASE 0x1000
+
+extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
+ u8 val);
+#define ADT7461_read_byte(address) \
+ do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
+#define ADT7461_write_byte(address, val) \
+ do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+
/********************************************************
* dbm690t uses a BCM5789 as on-board NIC.
* It has a pin named LOW_POWER to enable it into LOW POWER state.
@@ -63,6 +76,109 @@ static void enable_onboard_nic()
outb(byte, 0xC52);
}
+/********************************************************
+* dbm690t uses SB600 GPIO9 to detect IDE_DMA66.
+* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
+* get the cable type, 40 pin or 80 pin?
+********************************************************/
+static void get_ide_dma66()
+{
+ u8 byte;
+ /*u32 sm_dev, ide_dev; */
+ device_t sm_dev, ide_dev;
+ struct bus pbus;
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ byte =
+ pci_cf8_conf1.read8(&pbus, sm_dev->bus->secondary,
+ sm_dev->path.u.pci.devfn, 0xA9);
+ byte |= (1 << 5); /* Set Gpio9 as input */
+ pci_cf8_conf1.write8(&pbus, sm_dev->bus->secondary,
+ sm_dev->path.u.pci.devfn, 0xA9, byte);
+
+ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+ byte =
+ pci_cf8_conf1.read8(&pbus, ide_dev->bus->secondary,
+ ide_dev->path.u.pci.devfn, 0x56);
+ byte &= ~(7 << 0);
+ if ((1 << 5) & pci_cf8_conf1.
+ read8(&pbus, sm_dev->bus->secondary, sm_dev->path.u.pci.devfn,
+ 0xAA))
+ byte |= 2 << 0; /* mode 2 */
+ else
+ byte |= 5 << 0; /* mode 5 */
+ pci_cf8_conf1.write8(&pbus, ide_dev->bus->secondary,
+ ide_dev->path.u.pci.devfn, 0x56, byte);
+}
+
+/*
+ * set thermal config
+ */
+static void set_thermal_config()
+{
+ u8 byte;
+ u16 word;
+ device_t sm_dev;
+ struct bus pbus;
+
+ /* set ADT 7461 */
+ ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
+ ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
+ ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
+ ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
+
+ ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
+ ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
+
+ byte = ADT7461_read_byte(0x02); /* read status register to clear it */
+ printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+
+ /* sb600 settings for thermal config */
+ /* set SB600 GPIO 64 to GPIO with pull-up */
+ byte = pm2_ioread(0x42);
+ byte &= 0x3f;
+ pm2_iowrite(0x42, byte);
+
+ /* set GPIO 64 to input */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ word =
+ pci_cf8_conf1.read16(&pbus, sm_dev->bus->secondary,
+ sm_dev->path.u.pci.devfn, 0x56);
+ word |= 1 << 7;
+ pci_cf8_conf1.write16(&pbus, sm_dev->bus->secondary,
+ sm_dev->path.u.pci.devfn, 0x56, word);
+
+ /* set GPIO 64 internal pull-up */
+ byte = pm2_ioread(0xf0);
+ byte &= 0xee;
+ pm2_iowrite(0xf0, byte);
+
+ /* set Talert to be active low */
+ byte = pm_ioread(0x67);
+ byte &= ~(1 << 5);
+ pm_iowrite(0x67, byte);
+
+ /* set Talert to generate ACPI event */
+ byte = pm_ioread(0x3c);
+ byte &= 0xf3;
+ pm_iowrite(0x3c, byte);
+
+ /* THERMTRIP pin */
+ /* byte = pm_ioread(0x68);
+ * byte |= 1 << 3;
+ * pm_iowrite(0x68, byte);
+ *
+ * byte = pm_ioread(0x55);
+ * byte |= 1 << 0;
+ * pm_iowrite(0x55, byte);
+ *
+ * byte = pm_ioread(0x67);
+ * byte &= ~( 1 << 6);
+ * pm_iowrite(0x67, byte);
+ */
+}
+
/*************************************************
* enable the dedicated function in dbm690t board.
* This function called early than rs690_enable.
@@ -72,47 +188,54 @@ void dbm690t_enable(device_t dev)
struct mainboard_amd_dbm690t_config *mainboard =
(struct mainboard_amd_dbm690t_config *)dev->chip_info;
+ printk_info("Mainboard DBM690T Enable. dev=0x%x\n", dev);
+
#if (CONFIG_GFXUMA == 1)
msr_t msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
- printk_info("dbm690t_enable, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", msr.lo, msr.hi);
+ printk_info
+ ("dbm690t_enable, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
- printk_info("dbm690t_enable, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", msr2.lo, msr2.hi);
+ printk_info
+ ("dbm690t_enable, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ msr2.lo, msr2.hi);
switch (msr.lo) {
- case 0x10000000: /* 256M system memory */
- uma_memory_size = 0x2000000; /* 32M recommended UMA */
- break;
+ case 0x10000000: /* 256M system memory */
+ uma_memory_size = 0x2000000; /* 32M recommended UMA */
+ break;
- case 0x18000000: /* 384M system memory */
- uma_memory_size = 0x4000000; /* 64M recommended UMA */
- break;
+ case 0x18000000: /* 384M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
- case 0x20000000: /* 512M system memory */
- uma_memory_size = 0x4000000; /* 64M recommended UMA */
- break;
+ case 0x20000000: /* 512M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
- default: /* 1GB and above system memory */
- uma_memory_size = 0x8000000; /* 128M recommended UMA */
- break;
+ default: /* 1GB and above system memory */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ break;
}
- uma_memory_start = msr.lo - uma_memory_size;/* TOP_MEM1 */
- printk_info("dbm690t_enable: uma size 0x%08x, memory start 0x%08x\n", uma_memory_size, uma_memory_start);
+ uma_memory_start = msr.lo - uma_memory_size; /* TOP_MEM1 */
+ printk_info("dbm690t_enable: uma size 0x%08x, memory start 0x%08x\n",
+ uma_memory_size, uma_memory_start);
/* TODO: TOP_MEM2 */
#else
- uma_memory_size = 0x8000000; /* 128M recommended UMA */
- uma_memory_start = 0x38000000; /* 1GB system memory supposed */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ uma_memory_start = 0x38000000; /* 1GB system memory supposed */
#endif
- printk_info("dbm690t_enable. dev=0x%x\n", dev);
-
enable_onboard_nic();
+ get_ide_dma66();
+ set_thermal_config();
}
/*
@@ -122,5 +245,5 @@ struct chip_operations mainboard_amd_dbm690t_ops = {
#if CONFIG_CHIP_NAME == 1
CHIP_NAME("AMD Dbm690t Mainboard")
#endif
- .enable_dev = dbm690t_enable,
+ .enable_dev = dbm690t_enable,
};
diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c
index 43f7f4421b..151f175a0e 100644
--- a/src/mainboard/amd/dbm690t/mptable.c
+++ b/src/mainboard/amd/dbm690t/mptable.c
@@ -31,11 +31,11 @@ extern u8 bus_isa;
extern u8 bus_rs690[8];
extern u8 bus_sb600[2];
-extern unsigned long apicid_sb600;
+extern u32 apicid_sb600;
-extern unsigned long bus_type[256];
-extern unsigned long sbdn_rs690;
-extern unsigned long sbdn_sb600;
+extern u32 bus_type[256];
+extern u32 sbdn_rs690;
+extern u32 sbdn_sb600;
extern void get_bus_conf(void);
@@ -102,7 +102,7 @@ void *smp_write_config_table(void *v)
/* dword |= 1<<22; PIC and APIC co exists */
pci_write_config32(dev, 0xac, dword);
- /*
+ /*
* 00:12.0: PROG SATA : INT F
* 00:13.0: INTA USB_0
* 00:13.1: INTB USB_1
@@ -121,7 +121,7 @@ void *smp_write_config_table(void *v)
/* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
#define IO_LOCAL_INT(type, intr, apicid, pin) \
smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
-
+
IO_LOCAL_INT(mp_ExtINT, 0x0, apicid_sb600, 0x0);
/* ISA ints are edge-triggered, and usually originate from the ISA bus,
@@ -143,8 +143,12 @@ void *smp_write_config_table(void *v)
/* PCI interrupts are level triggered, and are
* associated with a specific bus/device/function tuple.
*/
+#if HAVE_ACPI_TABLES == 0
#define PCI_INT(bus, dev, fn, pin) \
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin))
+#else
+#define PCI_INT(bus, dev, fn, pin)
+#endif
/* usb */
PCI_INT(0x0, 0x13, 0x0, 0x10);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 20:52:00 +0000