diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h | 79 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h | 54 |
2 files changed, 117 insertions, 16 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h index dff96f0f4d..1916e4e1c0 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h @@ -840,7 +840,14 @@ typedef struct { /** Offset 0x02E2 - Core PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 **/ - UINT16 CorePllVoltageOffset; + UINT8 CorePllVoltageOffset; + +/** Offset 0x02E3 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.<b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; /** Offset 0x02E4 - BCLK Adaptive Voltage Enable When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: @@ -1154,11 +1161,11 @@ typedef struct { **/ UINT32 PcieRpEnableMask; -/** Offset 0x050C - SerialIo Uart Debug - Enable SerialIo Uart debug. - 0:Disable, 1:Enable +/** Offset 0x050C - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. **/ - UINT8 PcdSerialDebugEnable; + UINT8 PcdDebugInterfaceFlags; /** Offset 0x050D - SerialIo Uart Number Selection Select SerialIo Uart Controller for debug. @@ -1190,9 +1197,67 @@ typedef struct { **/ UINT8 PeciSxReset; -/** Offset 0x0512 +/** Offset 0x0512 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0513 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x0514 - Enable or Disable EV Loader + Enable or Disable EV Loader; <b>0: Disable;</b> 1: Enable. + $EN_DIS +**/ + UINT8 EvLoader; + +/** Offset 0x0515 - GT PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 + 0x0:0xFF +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x0516 - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 + 0x0:0xFF +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0517 - System Agent PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 + 0x0:0xFF +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0518 - Memory Controller PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 + 0x0:0xFF +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0519 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x051A - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x051B **/ - UINT8 ReservedFspmUpd[14]; + UINT8 ReservedFspmUpd[5]; } FSP_M_CONFIG; /** Fsp M Test Configuration diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h index e6ddbce116..e91bc796bf 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h @@ -221,7 +221,7 @@ typedef struct { **/ UINT8 XdciEnable; -/** Offset 0x006D - Enable XHCI SSIC Eanble +/** Offset 0x006D - Enable XHCI SSIC Enable Enable/disable XHCI SSIC port. $EN_DIS **/ @@ -1520,8 +1520,9 @@ typedef struct { **/ UINT8 UnusedUpdSpace18; -/** Offset 0x065C - PCH Pm WOL_OVR_WK_STS - Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. +/** Offset 0x065C - PCH Port 61h Config Enable/Disable + Used for the emulation feature for Port61h read. The port is trapped and the SMI + handler will toggle bit4 according to the handler's internal state. $EN_DIS **/ UINT8 PchPort61hEnable; @@ -1959,9 +1960,15 @@ typedef struct { **/ UINT8 Early8254ClockGatingEnable; -/** Offset 0x0720 +/** Offset 0x0720 - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x0721 **/ - UINT8 UnusedUpdSpace19[4]; + UINT8 UnusedUpdSpace19[3]; /** Offset 0x0724 - Pch PCIE device override table pointer The PCIe device table is being used to override PCIe device ASPM settings. This @@ -2065,7 +2072,7 @@ typedef struct { **/ UINT8 ChapDeviceEnable; -/** Offset 0x0785 - Skip PAM regsiter lock +/** Offset 0x0785 - Skip PAM register lock Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): PAM registers will be locked by RC $EN_DIS @@ -2145,7 +2152,8 @@ typedef struct { /** Offset 0x079C - 1-Core Ratio Limit 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal - to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit, 5-Core Ratio Limit, + 6-Core Ratio Limit, 7-Core Ratio Limit, 8-Core Ratio Limit. Range is 0 to 83 **/ UINT8 OneCoreRatioLimit; @@ -2740,11 +2748,39 @@ typedef struct { **/ UINT32 CpuS3ResumeData; -/** Offset 0x0884 - ReservedCpuPostMemTest +/** Offset 0x0884 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0885 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0886 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0887 - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0888 - ReservedCpuPostMemTest Reserved for CPU Post-Mem Test $EN_DIS **/ - UINT8 ReservedCpuPostMemTest[6]; + UINT8 ReservedCpuPostMemTest[2]; /** Offset 0x088A - SgxSinitDataFromTpm SgxSinitDataFromTpm default values |