diff options
Diffstat (limited to 'src')
124 files changed, 0 insertions, 5844 deletions
diff --git a/src/mainboard/aaeon/Kconfig b/src/mainboard/aaeon/Kconfig deleted file mode 100644 index a60a4c5465..0000000000 --- a/src/mainboard/aaeon/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_AAEON - -choice - prompt "Mainboard model" - -source "src/mainboard/aaeon/*/Kconfig.name" - -endchoice - -source "src/mainboard/aaeon/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Aaeon" - -endif # VENDOR_AAEON diff --git a/src/mainboard/aaeon/pfm-540i_revb/Kconfig b/src/mainboard/aaeon/pfm-540i_revb/Kconfig deleted file mode 100644 index 6b156b2f30..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_AAEON_PFM_540I_REVB - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_1024 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default aaeon/pfm-540i_revb - -config MAINBOARD_PART_NUMBER - string - default "PFM-540I_REVB" - -config IRQ_SLOT_COUNT - int - default 4 - -endif # BOARD_AAEON_PFM_540I_REVB diff --git a/src/mainboard/aaeon/pfm-540i_revb/Kconfig.name b/src/mainboard/aaeon/pfm-540i_revb/Kconfig.name deleted file mode 100644 index beaf0e72d3..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AAEON_PFM_540I_REVB - bool "PFM-540I_REVB" diff --git a/src/mainboard/aaeon/pfm-540i_revb/board_info.txt b/src/mainboard/aaeon/pfm-540i_revb/board_info.txt deleted file mode 100644 index 76246af4f0..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: PFM-540I Rev.B -Category: half -Board URL: http://www.aaeonusa.com/products/details/?item_id=1043 diff --git a/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb b/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb deleted file mode 100644 index f1f36938c7..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb +++ /dev/null @@ -1,73 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci c.0 on end # ISA Bridge (PC104) - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/smsc/smscsuperio - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.7 on # Keyboard - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.a off end # Runtime/ACPI - - # superio/smsc/smscsuperio currently only supports the first 2 serial ports. - device pnp 4e.b off # Com3 - io 0x60 = 0x3e8 - irq 0x70 = 10 - end - device pnp 4e.c off # Com4 - io 0x60 = 0x2e8 - irq 0x70 = 11 - end - end - end - device pci f.2 on end # IDE Controller - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c b/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c deleted file mode 100644 index 82aaa23ef4..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2011 Mark Norman <mpnorman@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 5 -#define PIRQB 11 -#define PIRQC 10 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - /* CPU */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - /* Ethernet */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - /* Chipset */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/aaeon/pfm-540i_revb/romstage.c b/src/mainboard/aaeon/pfm-540i_revb/romstage.c deleted file mode 100644 index 8ee2453419..0000000000 --- a/src/mainboard/aaeon/pfm-540i_revb/romstage.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2011 Mark Norman <mpnorman@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 mainboard. */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/amd/db800/Kconfig b/src/mainboard/amd/db800/Kconfig deleted file mode 100644 index c6f99e9e93..0000000000 --- a/src/mainboard/amd/db800/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_AMD_DB800 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default amd/db800 - -config MAINBOARD_PART_NUMBER - string - default "DB800" - -config IRQ_SLOT_COUNT - int - default 4 - -endif # BOARD_AMD_DB800 diff --git a/src/mainboard/amd/db800/Kconfig.name b/src/mainboard/amd/db800/Kconfig.name deleted file mode 100644 index 486b617019..0000000000 --- a/src/mainboard/amd/db800/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_DB800 - bool "DB800 (Salsa)" diff --git a/src/mainboard/amd/db800/board_info.txt b/src/mainboard/amd/db800/board_info.txt deleted file mode 100644 index 079c99f669..0000000000 --- a/src/mainboard/amd/db800/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: DB800 (Salsa) -Category: eval -Board URL: http://www.amd.com/us/products/embedded/develop-and-design/Pages/development-boards-lx.aspx diff --git a/src/mainboard/amd/db800/cmos.layout b/src/mainboard/amd/db800/cmos.layout deleted file mode 100644 index b238a379d8..0000000000 --- a/src/mainboard/amd/db800/cmos.layout +++ /dev/null @@ -1,28 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/amd/db800/devicetree.cb b/src/mainboard/amd/db800/devicetree.cb deleted file mode 100644 index 781beb59d8..0000000000 --- a/src/mainboard/amd/db800/devicetree.cb +++ /dev/null @@ -1,67 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci d.0 on end # Ethernet - device pci e.0 on end # Slot1 - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off end # Com2 - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HW Monitor - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/amd/db800/irq_tables.c b/src/mainboard/amd/db800/irq_tables.c deleted file mode 100644 index 8cf172a540..0000000000 --- a/src/mainboard/amd/db800/irq_tables.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 10 -#define PIRQD 11 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x1, 0x0}, /* slot1 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/amd/db800/romstage.c b/src/mainboard/amd/db800/romstage.c deleted file mode 100644 index fb553cee17..0000000000 --- a/src/mainboard/amd/db800/romstage.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/amd/f2950/Kconfig b/src/mainboard/amd/f2950/Kconfig deleted file mode 100644 index 5bfe1202ff..0000000000 --- a/src/mainboard/amd/f2950/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_AMD_F2950 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default amd/f2950 - -config MAINBOARD_PART_NUMBER - string - default "F2950" - -config IRQ_SLOT_COUNT - int - default 3 - -endif # BOARD_AMD_F2950 diff --git a/src/mainboard/amd/f2950/Kconfig.name b/src/mainboard/amd/f2950/Kconfig.name deleted file mode 100644 index 8f6073a640..0000000000 --- a/src/mainboard/amd/f2950/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_F2950 - bool "F2950" diff --git a/src/mainboard/amd/f2950/board_info.txt b/src/mainboard/amd/f2950/board_info.txt deleted file mode 100644 index e3f8b95ef8..0000000000 --- a/src/mainboard/amd/f2950/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: F2950 -Category: mini -ROM package: PLCC -ROM protocol: LPC -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/amd/f2950/cmos.layout b/src/mainboard/amd/f2950/cmos.layout deleted file mode 100644 index b238a379d8..0000000000 --- a/src/mainboard/amd/f2950/cmos.layout +++ /dev/null @@ -1,28 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/amd/f2950/devicetree.cb b/src/mainboard/amd/f2950/devicetree.cb deleted file mode 100644 index 4e563d21e7..0000000000 --- a/src/mainboard/amd/f2950/devicetree.cb +++ /dev/null @@ -1,67 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # Integrated cryptoaccelerator - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci d.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off end # Com2 - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HW Monitor - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/amd/f2950/irq_tables.c b/src/mainboard/amd/f2950/irq_tables.c deleted file mode 100644 index dae29a142f..0000000000 --- a/src/mainboard/amd/f2950/irq_tables.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 5 -#define PIRQC 10 -#define PIRQD 10 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/amd/f2950/romstage.c b/src/mainboard/amd/f2950/romstage.c deleted file mode 100644 index 7a28cfd8ce..0000000000 --- a/src/mainboard/amd/f2950/romstage.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/amd/norwich/Kconfig b/src/mainboard/amd/norwich/Kconfig deleted file mode 100644 index eb83c1ef8e..0000000000 --- a/src/mainboard/amd/norwich/Kconfig +++ /dev/null @@ -1,26 +0,0 @@ -if BOARD_AMD_NORWICH - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default amd/norwich - -config MAINBOARD_PART_NUMBER - string - default "Norwich" - -config IRQ_SLOT_COUNT - int - default 6 - -endif # BOARD_AMD_NORWICH diff --git a/src/mainboard/amd/norwich/Kconfig.name b/src/mainboard/amd/norwich/Kconfig.name deleted file mode 100644 index 0d590b1782..0000000000 --- a/src/mainboard/amd/norwich/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_NORWICH - bool "Norwich" diff --git a/src/mainboard/amd/norwich/board_info.txt b/src/mainboard/amd/norwich/board_info.txt deleted file mode 100644 index b351b8e696..0000000000 --- a/src/mainboard/amd/norwich/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/amd/norwich/cmos.layout b/src/mainboard/amd/norwich/cmos.layout deleted file mode 100644 index 457d773dbb..0000000000 --- a/src/mainboard/amd/norwich/cmos.layout +++ /dev/null @@ -1,29 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 1 e 0 dcon_present -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/amd/norwich/devicetree.cb b/src/mainboard/amd/norwich/devicetree.cb deleted file mode 100644 index 9a0121d8c1..0000000000 --- a/src/mainboard/amd/norwich/devicetree.cb +++ /dev/null @@ -1,40 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - register "lpc_serirq_enable" = "0x00001002" - register "lpc_serirq_polarity" = "0x0000EFFD" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci b.0 on end # Slot 3 - device pci c.0 on end # Slot 4 - device pci d.0 on end # Slot 1 - device pci e.0 on end # Slot 2 - device pci f.0 on end # ISA Bridge - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/amd/norwich/irq_tables.c b/src/mainboard/amd/norwich/irq_tables.c deleted file mode 100644 index a59dc26df7..0000000000 --- a/src/mainboard/amd/norwich/irq_tables.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 5 -#define PIRQC 10 -#define PIRQD 10 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c deleted file mode 100644 index 3111f2c6e8..0000000000 --- a/src/mainboard/amd/norwich/romstage.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <northbridge/amd/lx/raminit.h> - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - /* cs5536_disable_internal_uart: disable them for now, set them - * up later... - */ - /* If debug. real setup done in chipset init via devicetree.cb. */ - cs5536_setup_onchipuart(1); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/artecgroup/Kconfig b/src/mainboard/artecgroup/Kconfig deleted file mode 100644 index 69804eec49..0000000000 --- a/src/mainboard/artecgroup/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -if VENDOR_ARTECGROUP - -choice - prompt "Mainboard model" - -source "src/mainboard/artecgroup/*/Kconfig.name" - -endchoice - -config MAINBOARD_VENDOR - string - default "Artec Group" - -endif # VENDOR_ARTECGROUP - -if VENDOR_ARTECGROUP || VENDOR_LINUTOP -source "src/mainboard/artecgroup/*/Kconfig" -endif # VENDOR_ARTECGROUP || VENDOR_LINUTOP diff --git a/src/mainboard/artecgroup/dbe61/Kconfig b/src/mainboard/artecgroup/dbe61/Kconfig deleted file mode 100644 index c512f7b28d..0000000000 --- a/src/mainboard/artecgroup/dbe61/Kconfig +++ /dev/null @@ -1,28 +0,0 @@ -if BOARD_ARTECGROUP_DBE61 || BOARD_LINUTOP_LINUTOP1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_DISABLE - -config MAINBOARD_DIR - string - default artecgroup/dbe61 - -if BOARD_ARTECGROUP_DBE61 -config MAINBOARD_PART_NUMBER - string - default "DBE61" -endif - -config IRQ_SLOT_COUNT - int - default 3 - -endif # BOARD_ARTECGROUP_DBE61 diff --git a/src/mainboard/artecgroup/dbe61/Kconfig.name b/src/mainboard/artecgroup/dbe61/Kconfig.name deleted file mode 100644 index 7ebe0dfa87..0000000000 --- a/src/mainboard/artecgroup/dbe61/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ARTECGROUP_DBE61 - bool "DBE61" diff --git a/src/mainboard/artecgroup/dbe61/board_info.txt b/src/mainboard/artecgroup/dbe61/board_info.txt deleted file mode 100644 index d059a75572..0000000000 --- a/src/mainboard/artecgroup/dbe61/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: settop -Board URL: http://www.artecgroup.com/thincan/index.php?option=com_content&task=blogcategory&id=15&Itemid=34 -Flashrom support: y diff --git a/src/mainboard/artecgroup/dbe61/cmos.layout b/src/mainboard/artecgroup/dbe61/cmos.layout deleted file mode 100644 index b238a379d8..0000000000 --- a/src/mainboard/artecgroup/dbe61/cmos.layout +++ /dev/null @@ -1,28 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/artecgroup/dbe61/devicetree.cb b/src/mainboard/artecgroup/dbe61/devicetree.cb deleted file mode 100644 index 2532885f28..0000000000 --- a/src/mainboard/artecgroup/dbe61/devicetree.cb +++ /dev/null @@ -1,41 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - register "lpc_serirq_enable" = "0x00001002" - register "lpc_serirq_polarity" = "0x0000EFFD" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x2F8" - register "com1_irq" = "3" - register "com2_enable" = "1" - register "com2_address" = "0x3F8" - register "com2_irq" = "4" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci b.0 on end # Slot 3 - device pci c.0 on end # Slot 4 - device pci d.0 on end # Slot 1 - device pci e.0 on end # Slot 2 - device pci f.0 on end # ISA Bridge - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end - -end diff --git a/src/mainboard/artecgroup/dbe61/irq_tables.c b/src/mainboard/artecgroup/dbe61/irq_tables.c deleted file mode 100644 index e1af4d7ff1..0000000000 --- a/src/mainboard/artecgroup/dbe61/irq_tables.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 10 -#define PIRQD 11 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/artecgroup/dbe61/mainboard.c b/src/mainboard/artecgroup/dbe61/mainboard.c deleted file mode 100644 index 49d093ad6b..0000000000 --- a/src/mainboard/artecgroup/dbe61/mainboard.c +++ /dev/null @@ -1,52 +0,0 @@ -/* -* This file is part of the coreboot project. -* -* Copyright (C) 2007 Advanced Micro Devices -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -*/ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" - -static void init_gpio(void) -{ - msr_t msr; - printk(BIOS_DEBUG, "Checking GPIO module...\n"); - - msr = rdmsr(MDD_LBAR_GPIO); - printk(BIOS_DEBUG, "DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo); -} - -static void init(struct device *dev) -{ - /* BOARD-SPECIFIC INIT */ - printk(BIOS_DEBUG, "ARTECGROUP DBE61 ENTER %s\n", __func__); - - init_gpio(); - - printk(BIOS_DEBUG, "ARTECGROUP DBE61 EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/artecgroup/dbe61/romstage.c b/src/mainboard/artecgroup/dbe61/romstage.c deleted file mode 100644 index db08887299..0000000000 --- a/src/mainboard/artecgroup/dbe61/romstage.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include "spd_table.h" -#include <spd.h> -#include <northbridge/amd/lx/raminit.h> - -int spd_read_byte(unsigned int device, unsigned int address) -{ - int i; - - if (device == DIMM0) { - for (i = 0; i < (ARRAY_SIZE(spd_table)); i++) { - if (spd_table[i].address == address) { - return spd_table[i].data; - } - } - } - - /* returns 0xFF on any failures */ - return 0xFF; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - msr_t msr; - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: must do this AFTER the early_setup! - * it is counting on some early MSR setup - * for cs5536 - */ - /* cs5536_disable_internal_uart disable them. Set them up now... */ - cs5536_setup_onchipuart(2); /* dbe61 uses UART2 as COM1 */ - /* set address to 3F8 */ - msr = rdmsr(MDD_LEG_IO); - msr.lo |= 0x7 << 20; - wrmsr(MDD_LEG_IO, msr); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); -} diff --git a/src/mainboard/artecgroup/dbe61/spd_table.h b/src/mainboard/artecgroup/dbe61/spd_table.h deleted file mode 100644 index 6e052b3d88..0000000000 --- a/src/mainboard/artecgroup/dbe61/spd_table.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <spd.h> - -struct spd_entry { - unsigned int address; - unsigned int data; - }; - -/* Save space by using a short list of SPD values used by Geode LX Memory init */ -/* 128MB */ -const struct spd_entry spd_table [] = -{ -{SPD_MEMORY_TYPE, 0x07}, /* (Fundamental) memory type */ -{SPD_NUM_ROWS, 0x0D}, /* Number of row address bits */ -{SPD_NUM_COLUMNS, 0x09}, /* Number of column address bits */ -{SPD_NUM_DIMM_BANKS, 0x01}, /* Number of module rows (banks) */ -{SPD_MIN_CYCLE_TIME_AT_CAS_MAX, 0x50}, /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */ -{SPD_REFRESH, 0x82}, /* Refresh rate/type */ -{SPD_PRIMARY_SDRAM_WIDTH, 0x08}, /* SDRAM width (primary SDRAM) */ -{SPD_NUM_BANKS_PER_SDRAM, 0x04}, /* SDRAM device attributes, number of banks on SDRAM device */ -{SPD_ACCEPTABLE_CAS_LATENCIES, 0x1C}, /* SDRAM device attributes, CAS latency */ -{SPD_MODULE_ATTRIBUTES, 0x20}, /* SDRAM module attributes */ -{SPD_DEVICE_ATTRIBUTES_GENERAL, 0xC0}, /* SDRAM device attributes, general */ -{SPD_SDRAM_CYCLE_TIME_2ND, 0x60}, /* SDRAM cycle time (2nd highest CAS latency) */ -{SPD_SDRAM_CYCLE_TIME_3RD, 0x75}, /* SDRAM cycle time (3rd highest CAS latency) */ -{SPD_MIN_ROW_PRECHARGE_TIME, 0x3C}, /* Minimum row precharge time (Trp) */ -{SPD_MIN_ROWACTIVE_TO_ROWACTIVE, 0x28}, /* Minimum row active to row active (Trrd) */ -{SPD_MIN_RAS_TO_CAS_DELAY, 0x3C}, /* Minimum RAS to CAS delay (Trcd) */ -{SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY, 0x28}, /* Minimum RAS pulse width (Tras) */ -{SPD_DENSITY_OF_EACH_ROW_ON_MODULE, 0x20}, /* Density of each row on module */ -{SPD_CMD_SIGNAL_INPUT_HOLD_TIME, 0x60}, /* Command and address signal input hold time */ -{SPD_tRC, 0x37}, /* SDRAM Device Minimum Active to Active/Auto Refresh Time (tRC) */ -{SPD_tRFC, 0x46} /* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh (tRFC) */ -}; diff --git a/src/mainboard/bachmann/Kconfig b/src/mainboard/bachmann/Kconfig deleted file mode 100644 index 27831d1adc..0000000000 --- a/src/mainboard/bachmann/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_BACHMANN - -choice - prompt "Mainboard model" - -source "src/mainboard/bachmann/*/Kconfig.name" - -endchoice - -source "src/mainboard/bachmann/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Bachmann electronic" - -endif # VENDOR_BACHMANN diff --git a/src/mainboard/bachmann/ot200/Kconfig b/src/mainboard/bachmann/ot200/Kconfig deleted file mode 100644 index 3ca0384d2d..0000000000 --- a/src/mainboard/bachmann/ot200/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -if BOARD_BACHMANN_OT200 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_2048 - select POWER_BUTTON_DEFAULT_DISABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - -config MAINBOARD_DIR - string - default bachmann/ot200 - -config MAINBOARD_PART_NUMBER - string - default "OT200" - -config IRQ_SLOT_COUNT - int - default 6 - -config PLLMSRlo - hex - default 0x07de001e - -endif # BOARD_BACHMANN_OT200 diff --git a/src/mainboard/bachmann/ot200/Kconfig.name b/src/mainboard/bachmann/ot200/Kconfig.name deleted file mode 100644 index 4b63f968b2..0000000000 --- a/src/mainboard/bachmann/ot200/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_BACHMANN_OT200 - bool "OT200" diff --git a/src/mainboard/bachmann/ot200/board_info.txt b/src/mainboard/bachmann/ot200/board_info.txt deleted file mode 100644 index 0ba2657f1a..0000000000 --- a/src/mainboard/bachmann/ot200/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: settop diff --git a/src/mainboard/bachmann/ot200/cmos.default b/src/mainboard/bachmann/ot200/cmos.default deleted file mode 100644 index 3e6d135052..0000000000 --- a/src/mainboard/bachmann/ot200/cmos.default +++ /dev/null @@ -1,2 +0,0 @@ -boot_option=Fallback -debug_level=Spew diff --git a/src/mainboard/bachmann/ot200/cmos.layout b/src/mainboard/bachmann/ot200/cmos.layout deleted file mode 100644 index 88b1c64c21..0000000000 --- a/src/mainboard/bachmann/ot200/cmos.layout +++ /dev/null @@ -1,50 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Bachmann electronic GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -# ----------------------------------------------------------------- -# RTC reserved -0 384 r 0 reserved_memory - -384 1 e 4 boot_option -388 4 h 0 reboot_counter - -# ----------------------------------------------------------------- -# coreboot config options: console -#392 3 r 0 unused -395 4 e 2 debug_level - -# ----------------------------------------------------------------- -# coreboot config options: check sums -1008 16 h 0 check_sum - -enumerations - -#ID value text -2 0 Emergency -2 1 Alert -2 2 Critical -2 3 Error -2 4 Warning -2 5 Notice -2 6 Info -2 7 Debug -2 8 Spew -4 0 Fallback -4 1 Normal -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/bachmann/ot200/devicetree.cb b/src/mainboard/bachmann/ot200/devicetree.cb deleted file mode 100644 index 1e61b3d357..0000000000 --- a/src/mainboard/bachmann/ot200/devicetree.cb +++ /dev/null @@ -1,40 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - register "lpc_serirq_enable" = "0x00000000" - register "lpc_serirq_polarity" = "0x00000000" - register "lpc_serirq_mode" = "0" - register "enable_gpio_int_route" = "0x0C0D0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "1" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 4.0 on end # Ethernet 0 - device pci f.0 on # ISA Bridge - chip drivers/generic/generic # eeprom - device i2c 52 on end - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - device pci f.7 on end # UOC - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/bachmann/ot200/irq_tables.c b/src/mainboard/bachmann/ot200/irq_tables.c deleted file mode 100644 index 541861300a..0000000000 --- a/src/mainboard/bachmann/ot200/irq_tables.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Bachmann electronic GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 5 -#define PIRQB 9 -#define PIRQC 10 -#define PIRQD 7 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - 0x0f << 3, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x100b, /* Vendor */ - 0x2b, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x20, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0f << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x04 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* ethernet */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/bachmann/ot200/mainboard.c b/src/mainboard/bachmann/ot200/mainboard.c deleted file mode 100644 index 80fc2c6a4a..0000000000 --- a/src/mainboard/bachmann/ot200/mainboard.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Bachmann electronic GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/device.h> -#include <device/smbus.h> -#include <smbios.h> -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <arch/io.h> - -/* overwrite a weak function to fill SMBIOS table with a custom value */ -static u8 hw_rev = 0; -static char mb_rev_str[2] = { '0' }; - -const char *smbios_mainboard_version(void) -{ - /* UDMA is not working on all supported devices */ - if (hw_rev < 113) { - mb_rev_str[0] = '1'; - } else { - mb_rev_str[0] = '2'; - } - - return mb_rev_str; -} - -static void init(struct device *dev) -{ - unsigned int i; - u32 chksum = 0; - char block[20]; - msr_t reset; - device_t eeprom_dev = dev_find_slot_on_smbus(1, 0x52); - - if (eeprom_dev == 0) { - printk(BIOS_WARNING, "eeprom not found\n"); - return; - } - - /* turn off all leds except led_ini */ - outb(0x02, 0x5a); /* bit0 - led_run */ - /* bit1 - led_ini */ - /* bit2 - led_err */ - /* bit3-bit7 - write has no effect */ - outb(0x00, 0x49); /* bit0-bit6 - led_7-led_1 */ - /* bit7 - write has no effect */ - - /* read the whole block and check if checksum is okay */ - for (i = 0; i < 20; i++) { - block[i] = smbus_read_byte(eeprom_dev, i); - chksum += block[i]; - } - - if (chksum != 0) { - printk(BIOS_WARNING, "wrong checksum: 0x%0x\n", chksum); - } - - hw_rev = block[5]; - - printk(BIOS_DEBUG, "hw revision: %u\n", hw_rev); - - /* Reset MFGPT7 (standby power domain) - this is done via - * an undocumented register */ - reset = rdmsr(0x5140002b); - reset.lo |= 1 << 7; - wrmsr(0x5140002b, reset); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/bachmann/ot200/romstage.c b/src/mainboard/bachmann/ot200/romstage.c deleted file mode 100644 index 410c978eba..0000000000 --- a/src/mainboard/bachmann/ot200/romstage.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Bachmann electronic GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include <stdlib.h> -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/car.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <northbridge/amd/lx/raminit.h> - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - /* cs5536_disable_internal_uart: disable them for now, set them - * up later... - */ - /* If debug. real setup done in chipset init via devicetree.cb. */ - cs5536_setup_onchipuart(1); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig deleted file mode 100644 index 9b08501dde..0000000000 --- a/src/mainboard/digitallogic/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_DIGITALLOGIC - -choice - prompt "Mainboard model" - -source "src/mainboard/digitallogic/*/Kconfig.name" - -endchoice - -source "src/mainboard/digitallogic/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "DIGITAL-LOGIC" - -endif # VENDOR_DIGITALLOGIC diff --git a/src/mainboard/digitallogic/msm800sev/Kconfig b/src/mainboard/digitallogic/msm800sev/Kconfig deleted file mode 100644 index bc8e3ac71b..0000000000 --- a/src/mainboard/digitallogic/msm800sev/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_DIGITALLOGIC_MSM800SEV - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default digitallogic/msm800sev - -config MAINBOARD_PART_NUMBER - string - default "MSM800SEV" - -config IRQ_SLOT_COUNT - int - default 9 - -endif # BOARD_DIGITALLOGIC_MSM800SEV diff --git a/src/mainboard/digitallogic/msm800sev/Kconfig.name b/src/mainboard/digitallogic/msm800sev/Kconfig.name deleted file mode 100644 index 0f3dad03cf..0000000000 --- a/src/mainboard/digitallogic/msm800sev/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_DIGITALLOGIC_MSM800SEV - bool "MSM800SEV" diff --git a/src/mainboard/digitallogic/msm800sev/board_info.txt b/src/mainboard/digitallogic/msm800sev/board_info.txt deleted file mode 100644 index 21476adbd2..0000000000 --- a/src/mainboard/digitallogic/msm800sev/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.digitallogic.ch/english/products/datasheets/ms_pc104_detail.asp?id=MSM800SEV diff --git a/src/mainboard/digitallogic/msm800sev/cmos.layout b/src/mainboard/digitallogic/msm800sev/cmos.layout deleted file mode 100644 index b238a379d8..0000000000 --- a/src/mainboard/digitallogic/msm800sev/cmos.layout +++ /dev/null @@ -1,28 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb deleted file mode 100644 index b03d4c532c..0000000000 --- a/src/mainboard/digitallogic/msm800sev/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - # How to get these? Boot linux and do this: - # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x0000105a" - # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EFA5" - # mode is high 10 bits (determined from code) - register "lpc_serirq_mode" = "1" - # Don't yet know how to find this. - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci f.1 on end # Flash controller - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end - -end diff --git a/src/mainboard/digitallogic/msm800sev/irq_tables.c b/src/mainboard/digitallogic/msm800sev/irq_tables.c deleted file mode 100644 index 362cb2ae80..0000000000 --- a/src/mainboard/digitallogic/msm800sev/irq_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 5 -#define PIRQC 10 -#define PIRQD 10 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0f << 3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x100b, /* Vendor */ - 0x2b, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xe, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x01 << 3)|0x0, {{0x01, 0x0400}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x0f << 3)|0x0, {{0x01, 0x0400}, {0x02, 0x0800}, {0x03, 0x0400}, {0x04, 0x00800}}, 0x0, 0x0}, - {0x00,(0x13 << 3)|0x0, {{0x01, 0x0400}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x12 << 3)|0x0, {{0x03, 0x0400}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x11 << 3)|0x0, {{0x01, 0x0400}, {0x02, 0x0800}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x0a << 3)|0x0, {{0x01, 0x0400}, {0x02, 0x0800}, {0x03, 0x0400}, {0x04, 0x00800}}, 0x1, 0x0}, - {0x00,(0x0b << 3)|0x0, {{0x02, 0x0800}, {0x03, 0x0400}, {0x04, 0x0800}, {0x01, 0x00400}}, 0x2, 0x0}, - {0x00,(0x0c << 3)|0x0, {{0x03, 0x0400}, {0x04, 0x0800}, {0x01, 0x0400}, {0x02, 0x00800}}, 0x3, 0x0}, - {0x00,(0x0d << 3)|0x0, {{0x04, 0x0800}, {0x01, 0x0400}, {0x02, 0x0800}, {0x03, 0x00400}}, 0x4, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c deleted file mode 100644 index 82d3a36370..0000000000 --- a/src/mainboard/digitallogic/msm800sev/romstage.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/car.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl [] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: must do this AFTER the early_setup! - * it is counting on some early MSR setup - * for cs5536 - */ - cs5536_disable_internal_uart(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Switch from Cache as RAM to real RAM */ - /* There are two ways we could think about this. - 1. If we are using the romstage.inc ROMCC way, the stack is going to be re-setup in the code following this code. - Just wbinvd the stack to clear the cache tags. We don't care where the stack used to be. - 2. This file is built as a normal .c -> .o and linked in etc. The stack might be used to return etc. - That means we care about what is in the stack. If we are smart we set the CAR stack to the same location - as the rest of coreboot. If that is the case we can just do a wbinvd. The stack will be written into real - RAM that is now setup and we continue like nothing happened. If the stack is located somewhere other than - where LB would like it, you need to write some code to do a copy from cache to RAM - - We use method 1 on Norwich. - */ - post_code(0x02); - __asm__("wbinvd\n"); - printk(BIOS_ERR, "Past wbinvd\n"); - /* we are finding the return does not work on this board. Explicitly call the label that is - * after the call to us. This is gross, but sometimes at this level it is the only way out - */ - done_cache_as_ram_main(); -} diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig deleted file mode 100644 index 74a3c102de..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if BOARD_IEI_PCISA_LX_800_R10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pcisa-lx-800-r10 - -config MAINBOARD_PART_NUMBER - string - default "PCISA-LX-800-R10" - -config IRQ_SLOT_COUNT - int - default 9 - -config PLLMSRlo - hex - default 0x00DE6000 - -endif # BOARD_IEI_PCISA_LX_800_R10 diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name deleted file mode 100644 index 84d2f492d3..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_IEI_PCISA_LX_800_R10 - bool "PCISA LX-800-R10" diff --git a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt b/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt deleted file mode 100644 index b5a9773a84..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX diff --git a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb deleted file mode 100644 index 99851b8fd7..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 9.0 on end # Slot1 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot3 - device pci c.0 on end # Slot4 - device pci e.0 on end # Ethernet 0 - device pci 10.0 on end # Ethernet 1 - device pci 11.0 on end # SATA - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HW Monitor - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c b/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c deleted file mode 100644 index 69dd16d8a2..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -// #include <console/console.h> -#include <arch/io.h> - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 5 - -/* Link */ -#define LINK_PIRQA 1 -#define LINK_PIRQB 2 -#define LINK_PIRQC 3 -#define LINK_PIRQD 4 -#define LINK_NONE 0 - -/* Map */ -#define IRQ_BITMAP_LINKA (1 << PIRQA) -#define IRQ_BITMAP_LINKB (1 << PIRQB) -#define IRQ_BITMAP_LINKC (1 << PIRQC) -#define IRQ_BITMAP_LINKD (1 << PIRQD) -#define IRQ_BITMAP_NOLINK 0x0 - -#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x0002, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x62, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - - .slots = { - [0] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x01 << 3)|0x0, /* 0x01 is CS5536 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [1] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0f << 3)|0x0, /* 0x0f is CS5536 (USB, AUDIO) */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQB, /* Audio */ - .bitmap = IRQ_BITMAP_LINKB - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQD, /* USB */ - .bitmap = IRQ_BITMAP_LINKD - } - } - }, - - [2] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0e << 3)|0x0, /* 0x0e is eth0 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [3] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x10 << 3)|0x0, /* 0x10 is eth1 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [4] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x11 << 3)|0x0, /* 0x11 is SATA */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - -/* - * ################### backplane ################### - */ - -/* - * PCI1 - */ - [5] = { - .slot = 0x1, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x09 << 3)|0x0, /* 0x09 is PCI1 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - } - } - }, -/* - * PCI2 - */ - [6] = { - .slot = 0x2, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0a << 3)|0x0, /* 0x0a is PCI2 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - } - } - }, -/* - * PCI3 - */ - [7] = { - .slot = 0x3, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0b << 3)|0x0, /* 0x0b is PCI3 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - } - } - }, -/* - * PCI4 - */ - [8] = { - .slot = 0x4, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0c << 3)|0x0, /* 0x0c is PCI4 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - } - } - }, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - /* Put the PIR table in memory and checksum. */ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c deleted file mode 100644 index 67b5266bac..0000000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/car.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/iei/pm-lx-800-r11/Kconfig b/src/mainboard/iei/pm-lx-800-r11/Kconfig deleted file mode 100644 index 306d9f9f80..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -if BOARD_IEI_PM_LX_800_R11 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627EHG - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pm-lx-800-r11 - -config MAINBOARD_PART_NUMBER - string - default "PM-LX-800-R11" - -config IRQ_SLOT_COUNT - int - default 7 - -config PLLMSRlo - hex - default 0x07de0000 - -endif # BOARD_IEI_PM_LX_800_R11 diff --git a/src/mainboard/iei/pm-lx-800-r11/Kconfig.name b/src/mainboard/iei/pm-lx-800-r11/Kconfig.name deleted file mode 100644 index e07451a499..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_IEI_PM_LX_800_R11 - bool "PM LX-800-R11" diff --git a/src/mainboard/iei/pm-lx-800-r11/board_info.txt b/src/mainboard/iei/pm-lx-800-r11/board_info.txt deleted file mode 100644 index f9a9fdb4d3..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=00001000010000000001&cid=09050665574743104681&id=08142307826854456110#.UCLx8cLlgao -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/iei/pm-lx-800-r11/devicetree.cb b/src/mainboard/iei/pm-lx-800-r11/devicetree.cb deleted file mode 100644 index b06cd683c6..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/devicetree.cb +++ /dev/null @@ -1,96 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Video Adapter - device pci 1.2 on end # AES Security Block - chip southbridge/amd/cs5536 - register "lpc_serirq_enable" = "0x0000115a" - register "lpc_serirq_polarity" = "0x0000eea5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0d0c0700" - register "enable_ide_nand_flash" = "0" - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" - register "com1_enable" = "1" # CN10 (RS422/486 COM3) - register "com1_address" = "0x3e8" - register "com1_irq" = "5" - register "com2_enable" = "0" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci e.0 on end # RTL8100C - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627ehg # Winbond W83627EHG - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - - device pnp 2e.5 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard - irq 0x72 = 12 # Mouse - end - - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - - device pnp 2e.6 off end # Serial Flash Interface - device pnp 2e.7 off end # GPIO1, GPIO6, Game Port & MIDI Port - device pnp 2e.8 off end # WDTO# & PLED - device pnp 2e.9 off end # GPIO2,GPIO3, GPIO4, GPIO5 & SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.106 off end # - device pnp 2e.107 off end # - device pnp 2e.207 off end # - - end - end - device pci f.2 on end # IDE Controller - device pci f.3 off end # Audio (N/A) - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/iei/pm-lx-800-r11/irq_tables.c b/src/mainboard/iei/pm-lx-800-r11/irq_tables.c deleted file mode 100644 index f8942a5422..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/irq_tables.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/pci_ids.h> -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 11 -#define PIRQD 11 - -/* Links */ -#define L_PIRQA 1 -#define L_PIRQB 2 -#define L_PIRQC 3 -#define L_PIRQD 4 - -/* Bitmaps */ -#define B_LINK0 (1 << PIRQA) -#define B_LINK1 (1 << PIRQB) -#define B_LINK2 (1 << PIRQC) -#define B_LINK3 (1 << PIRQD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - 0x0f << 3, /* Interrupt router dev */ - B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3, /* IRQs devoted exclusively to PCI usage */ - PCI_VENDOR_ID_AMD, /* Vendor */ - PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ - 0, /* Miniport */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* Reserved */ - 0xa6, /* Checksum */ - { - [0] = { /* Host bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x01 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [1] = { /* ISA bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [2] = { /* Ethernet */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0e << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [2] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [3] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - } - } - }, - - [3] = { /* PCI Connector - Slot 0 */ - .slot = 0x01, - .bus = 0x00, - .devfn = (0x09 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [4] = { /* PCI Connector - Slot 1 */ - .slot = 0x02, - .bus = 0x00, - .devfn = (0x0c << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [1] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [2] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [3] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - } - } - }, - - [5] = { /* PCI Connector - Slot 2 */ - .slot = 0x03, - .bus = 0x00, - .devfn = (0x0b << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [1] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [2] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [3] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - } - } - }, - - [6] = { /* PCI Connector - Slot 3 */ - .slot = 0x04, - .bus = 0x00, - .devfn = (0x0a << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [2] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [3] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - } - } - } - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pm-lx-800-r11/romstage.c b/src/mainboard/iei/pm-lx-800-r11/romstage.c deleted file mode 100644 index 7feb5d9b89..0000000000 --- a/src/mainboard/iei/pm-lx-800-r11/romstage.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> -#include <spd.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - /* Only DIMM0 is available. */ - if (device != DIMM0) - return 0xff; - - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/lx/pll_reset.c> -#include <cpu/amd/geode_lx/cpureginit.c> -#include <cpu/amd/geode_lx/syspreinit.c> -#include <cpu/amd/geode_lx/msrinit.c> - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); -} diff --git a/src/mainboard/iei/pm-lx2-800-r10/Kconfig b/src/mainboard/iei/pm-lx2-800-r10/Kconfig deleted file mode 100644 index d033ba7195..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -if BOARD_IEI_PM_LX2_800_R10 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pm-lx2-800-r10 - -config MAINBOARD_PART_NUMBER - string - default "PM-LX2-800-R10" - -config IRQ_SLOT_COUNT - int - default 3 - -config PLLMSRlo - hex - default 0x07de0000 - -endif # BOARD_IEI_PM_LX2_800_R10 diff --git a/src/mainboard/iei/pm-lx2-800-r10/Kconfig.name b/src/mainboard/iei/pm-lx2-800-r10/Kconfig.name deleted file mode 100644 index af78c50133..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_IEI_PM_LX2_800_R10 - bool "PM LX2-800-R10" diff --git a/src/mainboard/iei/pm-lx2-800-r10/board_info.txt b/src/mainboard/iei/pm-lx2-800-r10/board_info.txt deleted file mode 100644 index 40edf4aab9..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=00001000010000000001&cid=09050665574743104681&id=09034367569861123956#.UI2CfiExUao -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb b/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb deleted file mode 100644 index bfb911f15b..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb +++ /dev/null @@ -1,82 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Video Adapter - device pci 1.2 on end # AES Security Block - chip southbridge/amd/cs5536 - register "lpc_serirq_enable" = "0x000010da" - register "lpc_serirq_polarity" = "0x0000ef25" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0d0c0700" - register "enable_ide_nand_flash" = "0" - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" - register "com1_enable" = "0" - register "com2_enable" = "0" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 11.0 on end # IT8888 - device pci e.0 on end # RTL8100C - device pci f.0 on # ISA Bridge - chip superio/smsc/smscsuperio # SMSC SCH3114 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - - device pnp 2e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - - device pnp 2e.7 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard - irq 0x72 = 12 # Mouse - end - - device pnp 2e.a on # Runtime Register - io 0x60 = 0x400 - end - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c b/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c deleted file mode 100644 index 1afbdc01aa..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/pci_ids.h> -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 11 - -/* Links */ -#define L_PIRQN 0 -#define L_PIRQA 1 -#define L_PIRQB 2 -#define L_PIRQC 3 -#define L_PIRQD 4 - -/* Bitmaps */ -#define B_LINKN (0) -#define B_LINK0 (1 << PIRQA) -#define B_LINK1 (1 << PIRQB) -#define B_LINK2 (1 << PIRQC) -#define B_LINK3 (1 << PIRQD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x0f << 3) | 0x0, /* Interrupt router dev */ - (B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3),/* IRQs devoted exclusively to PCI usage */ - PCI_VENDOR_ID_AMD, /* Vendor */ - PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ - 0, /* Miniport */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, - 0x27, /* Checksum */ - { - [0] = { /* Host bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x01 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQN, - .bitmap = B_LINKN - } - } - }, - - [1] = { /* ISA bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [2] = { /* Ethernet */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0e << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQN, - .bitmap = B_LINKN - } - } - } - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pm-lx2-800-r10/mainboard.c b/src/mainboard/iei/pm-lx2-800-r10/mainboard.c deleted file mode 100644 index 5c5d0de48c..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/mainboard.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci.h> -#include <device/device.h> -#include <boot/tables.h> - -/* SCH3114 runtime register (RTR) address. */ -#define SCH3114_RTR_ADDR (0x400) -/* H/W Monitoring register block index. */ -#define SCH3114_RTR_HWM_IDX (SCH3114_RTR_ADDR + 0x70) -/* H/W Monitoring register block data. */ -#define SCH3114_RTR_HWM_DAT (SCH3114_RTR_ADDR + 0x71) -/* H/W Monitoring Ready/Lock/Start register. */ -#define SCH3114_HWM_RLS_REG (0x40) - -static void init(struct device *dev) -{ - /* SCH3114: enable hardware monitor. */ - printk(BIOS_INFO, "Enabling SCH3114 hardware monitor\n"); - outb(SCH3114_HWM_RLS_REG, SCH3114_RTR_HWM_IDX); - outb(inb(SCH3114_RTR_HWM_DAT) | 0x01, SCH3114_RTR_HWM_DAT); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/iei/pm-lx2-800-r10/romstage.c b/src/mainboard/iei/pm-lx2-800-r10/romstage.c deleted file mode 100644 index bfb7cb513b..0000000000 --- a/src/mainboard/iei/pm-lx2-800-r10/romstage.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <spd.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/car.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - /* Only DIMM0 is available. */ - if (device != DIMM0) - return 0xFF; - - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/lx/pll_reset.c> -#include <cpu/amd/geode_lx/cpureginit.c> -#include <cpu/amd/geode_lx/syspreinit.c> -#include <cpu/amd/geode_lx/msrinit.c> - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Enable COM3. */ - pnp_devfn_t dev = PNP_DEV(0x2e, 0x0b); - u16 port = dev >> 8; - outb(0x55, port); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 4); - pnp_set_enable(dev, 1); - outb(0xaa, port); - - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); -} diff --git a/src/mainboard/linutop/Kconfig b/src/mainboard/linutop/Kconfig deleted file mode 100644 index 796777b9b0..0000000000 --- a/src/mainboard/linutop/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_LINUTOP - -choice - prompt "Mainboard model" - -source "src/mainboard/linutop/*/Kconfig.name" - -endchoice - -config MAINBOARD_VENDOR - string - default "Linutop" - -source "src/mainboard/linutop/*/Kconfig" - -endif # VENDOR_LINUTOP diff --git a/src/mainboard/linutop/Kconfig.name b/src/mainboard/linutop/Kconfig.name deleted file mode 100644 index 34f538dd70..0000000000 --- a/src/mainboard/linutop/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_LINUTOP - bool "Linutop" diff --git a/src/mainboard/linutop/linutop1/Kconfig b/src/mainboard/linutop/linutop1/Kconfig deleted file mode 100644 index c8f9a24116..0000000000 --- a/src/mainboard/linutop/linutop1/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_LINUTOP_LINUTOP1 - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "Linutop-1" - -endif diff --git a/src/mainboard/linutop/linutop1/Kconfig.name b/src/mainboard/linutop/linutop1/Kconfig.name deleted file mode 100644 index d1cface72d..0000000000 --- a/src/mainboard/linutop/linutop1/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LINUTOP_LINUTOP1 - bool "Linutop-1" diff --git a/src/mainboard/linutop/linutop1/board_info.txt b/src/mainboard/linutop/linutop1/board_info.txt deleted file mode 100644 index e9d3d1e9d3..0000000000 --- a/src/mainboard/linutop/linutop1/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: settop -Board URL: http://www.linutop.com -Flashrom support: y -Clone of: artecgroup/dbe61 diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig deleted file mode 100644 index 04c22201c6..0000000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_LIPPERT_HURRICANE_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - select POWER_BUTTON_FORCE_ENABLE if !BOARD_OLD_REVISION - -config MAINBOARD_DIR - string - default lippert/hurricane-lx - -config MAINBOARD_PART_NUMBER - string - default "Hurricane-LX" - -config IRQ_SLOT_COUNT - int - default 8 - -config BOARD_OLD_REVISION - bool "Board is old pre-3.0 revision" - default n - select POWER_BUTTON_DEFAULT_DISABLE - help - Look on the bottom side for a number like 406-0001-30. The last 2 - digits state the PCB revision (3.0 in this example). For 2.0 or older - boards choose Y, for 3.0 and newer say N. - - Old revision boards need a jumper shorting the power button to - power on automatically. You may enable the button only after this - jumper has been removed. New revision boards are not restricted - in this way, and always have the power button enabled. - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_HURRICANE_LX diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig.name b/src/mainboard/lippert/hurricane-lx/Kconfig.name deleted file mode 100644 index 810fd44883..0000000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_HURRICANE_LX - bool "Hurricane-LX" diff --git a/src/mainboard/lippert/hurricane-lx/board_info.txt b/src/mainboard/lippert/hurricane-lx/board_info.txt deleted file mode 100644 index b464c8528c..0000000000 --- a/src/mainboard/lippert/hurricane-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1154 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/hurricane-lx/devicetree.cb b/src/mainboard/lippert/hurricane-lx/devicetree.cb deleted file mode 100644 index 7f751eb454..0000000000 --- a/src/mainboard/lippert/hurricane-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/hurricane-lx/irq_tables.c b/src/mainboard/lippert/hurricane-lx/irq_tables.c deleted file mode 100644 index 8d09cf450c..0000000000 --- a/src/mainboard/lippert/hurricane-lx/irq_tables.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x36, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x5, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c deleted file mode 100644 index 0f210cb200..0000000000 --- a/src/mainboard/lippert/hurricane-lx/mainboard.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x06 -#else - #define SIO_GP1X_CONFIG 0x00 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default) - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz -#endif - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old) - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c deleted file mode 100644 index 4e4004bb16..0000000000 --- a/src/mainboard/lippert/hurricane-lx/romstage.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <southbridge/amd/cs5536/smbus.h> -#include <spd.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum. */ -#define SMC_CONFIG 0x01 - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} -#endif - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2D29, // (GP36 = FAN_CTL3 (PWM), GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE - 0x06C8, // config GP12,11 as output, GP10 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 -#if IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - 0x1F2A, 0xC072, // switch GP13 to GPIO, WDT output from PWROK to KRST -#endif -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - int err; - /* bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } -#endif - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/literunner-lx/Kconfig b/src/mainboard/lippert/literunner-lx/Kconfig deleted file mode 100644 index c3aab0e918..0000000000 --- a/src/mainboard/lippert/literunner-lx/Kconfig +++ /dev/null @@ -1,50 +0,0 @@ -if BOARD_LIPPERT_LITERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/literunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool LiteRunner-LX" - -config IRQ_SLOT_COUNT - int - default 5 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports 1 & 2 to RS485" - default n - help - If selected, the first two on-board serial ports will operate in RS485 - mode instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board CF socket act as Slave" - default n - help - If selected, the on-board Compact Flash card socket will act as IDE - Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_LITERUNNER_LX diff --git a/src/mainboard/lippert/literunner-lx/Kconfig.name b/src/mainboard/lippert/literunner-lx/Kconfig.name deleted file mode 100644 index 1e44fe4724..0000000000 --- a/src/mainboard/lippert/literunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_LITERUNNER_LX - bool "Cool LiteRunner-LX" diff --git a/src/mainboard/lippert/literunner-lx/board_info.txt b/src/mainboard/lippert/literunner-lx/board_info.txt deleted file mode 100644 index 47b90b5be8..0000000000 --- a/src/mainboard/lippert/literunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1128 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/literunner-lx/devicetree.cb b/src/mainboard/lippert/literunner-lx/devicetree.cb deleted file mode 100644 index 834f109f6f..0000000000 --- a/src/mainboard/lippert/literunner-lx/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000129A" # 00010010 10011010 - register "lpc_serirq_polarity" = "0x0000ED65" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Ethernet 2 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet 1 - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/literunner-lx/irq_tables.c b/src/mainboard/lippert/literunner-lx/irq_tables.c deleted file mode 100644 index ede5b1eb8a..0000000000 --- a/src/mainboard/lippert/literunner-lx/irq_tables.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xB8, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 1 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 2 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x1, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c deleted file mode 100644 index 11f9e1420a..0000000000 --- a/src/mainboard/lippert/literunner-lx/mainboard.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -/* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ -#define SIO_GP2X_CONFIG 0x00 - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - /* bit1 = COM3_RX_EN, bit0 = COM3_TX_EN */ - outb(SIO_GP2X_CONFIG, 0x1221); /* Simple-I/O GP27-20 */ - - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c deleted file mode 100644 index b88a6a4ded..0000000000 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <southbridge/amd/cs5536/smbus.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board CF slot act as IDE slave. */ -#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE) - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) - printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) " - "returns 0xff\n", address); -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN - 0xFFC2, // enable Simple-I/O for GP37-30 - 0x07C8, // config GP12-10 as output - 0x03C9, // config GP21-20 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig deleted file mode 100644 index 051713a27d..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig +++ /dev/null @@ -1,42 +0,0 @@ -if BOARD_LIPPERT_ROADRUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Standard chip is a 512 KB FWH. Replacing it with a 1 MB - # SST 49LF008A is possible. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - -config MAINBOARD_DIR - string - default lippert/roadrunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool RoadRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_ROADRUNNER_LX diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig.name b/src/mainboard/lippert/roadrunner-lx/Kconfig.name deleted file mode 100644 index e7185da0fa..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_ROADRUNNER_LX - bool "Cool RoadRunner-LX" diff --git a/src/mainboard/lippert/roadrunner-lx/board_info.txt b/src/mainboard/lippert/roadrunner-lx/board_info.txt deleted file mode 100644 index fc48fcd973..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1147 -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb deleted file mode 100644 index f82368108d..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/devicetree.cb +++ /dev/null @@ -1,89 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 # Southbridge - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - # io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/roadrunner-lx/irq_tables.c b/src/mainboard/lippert/roadrunner-lx/irq_tables.c deleted file mode 100644 index f5cf698827..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/irq_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c deleted file mode 100644 index b922e7872b..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x26 -#else - #define SIO_GP1X_CONFIG 0x20 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs. */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c deleted file mode 100644 index 49b333b590..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include <stdlib.h> -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal - 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1) - 0x46B8, 0x0CB9, // enable pullups on RS485_EN - 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 - 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) - 0x26C8, // config GP15,12,11 as output; GP14 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig deleted file mode 100644 index 65645fdbf0..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig +++ /dev/null @@ -1,49 +0,0 @@ -if BOARD_LIPPERT_SPACERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/spacerunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool SpaceRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board SSD act as Slave" - default n - help - If selected, the on-board SSD will act as IDE Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_SPACERUNNER_LX diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig.name b/src/mainboard/lippert/spacerunner-lx/Kconfig.name deleted file mode 100644 index 85eec96382..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_SPACERUNNER_LX - bool "Cool SpaceRunner-LX" diff --git a/src/mainboard/lippert/spacerunner-lx/board_info.txt b/src/mainboard/lippert/spacerunner-lx/board_info.txt deleted file mode 100644 index 76be510bb6..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1148 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb deleted file mode 100644 index 5f5b15bbb6..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1 << 31 + Device 0x0F << 11 + Function 3 << 8 - register "unwanted_vpci[1]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 off end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/spacerunner-lx/irq_tables.c b/src/mainboard/lippert/spacerunner-lx/irq_tables.c deleted file mode 100644 index 37e82e5cf4..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/irq_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c deleted file mode 100644 index 594545d146..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c deleted file mode 100644 index a8885700ef..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include <stdlib.h> -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <southbridge/amd/cs5536/smbus.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */ -#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE) - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { - printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) " - "returns 0xff\n", address); - } -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x07C8, // config GP12-10 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/traverse/Kconfig b/src/mainboard/traverse/Kconfig deleted file mode 100644 index 7dec5e1d70..0000000000 --- a/src/mainboard/traverse/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_TRAVERSE - -choice - prompt "Mainboard model" - -source "src/mainboard/traverse/*/Kconfig.name" - -endchoice - -source "src/mainboard/traverse/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Traverse Technologies" - -endif # VENDOR_TRAVERSE diff --git a/src/mainboard/traverse/geos/Kconfig b/src/mainboard/traverse/geos/Kconfig deleted file mode 100644 index 354ca810b4..0000000000 --- a/src/mainboard/traverse/geos/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if BOARD_TRAVERSE_GEOS - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_1024 - select POWER_BUTTON_DEFAULT_DISABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default traverse/geos - -config MAINBOARD_PART_NUMBER - string - default "Geos" - -config IRQ_SLOT_COUNT - int - default 6 - -config PLLMSRlo - hex - default 0x00de602e - -endif # BOARD_TRAVERSE_GEOS diff --git a/src/mainboard/traverse/geos/Kconfig.name b/src/mainboard/traverse/geos/Kconfig.name deleted file mode 100644 index e446fa0b6e..0000000000 --- a/src/mainboard/traverse/geos/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TRAVERSE_GEOS - bool "Geos" diff --git a/src/mainboard/traverse/geos/board_info.txt b/src/mainboard/traverse/geos/board_info.txt deleted file mode 100644 index 394724a9e7..0000000000 --- a/src/mainboard/traverse/geos/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: half -Board URL: http://www.traverse.com.au/geos11-adsl2-x86-router-appliance -ROM package: PLCC -ROM socketed: y diff --git a/src/mainboard/traverse/geos/cmos.layout b/src/mainboard/traverse/geos/cmos.layout deleted file mode 100644 index 457d773dbb..0000000000 --- a/src/mainboard/traverse/geos/cmos.layout +++ /dev/null @@ -1,29 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 1 e 0 dcon_present -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/traverse/geos/devicetree.cb b/src/mainboard/traverse/geos/devicetree.cb deleted file mode 100644 index 4a2674e885..0000000000 --- a/src/mainboard/traverse/geos/devicetree.cb +++ /dev/null @@ -1,40 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - register "lpc_serirq_enable" = "0x00001002" - register "lpc_serirq_polarity" = "0x0000EFFD" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci a.0 on end # Ethernet 0 - device pci b.0 on end # Ethernet 1 - device pci c.0 on end # Xilinx - device pci d.0 on end # Mini PCI - device pci f.0 on end # ISA Bridge - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/traverse/geos/irq_tables.c b/src/mainboard/traverse/geos/irq_tables.c deleted file mode 100644 index 3e2e1d99a1..0000000000 --- a/src/mainboard/traverse/geos/irq_tables.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* eth0 */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* eth1 */ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x2, 0x0}, /* xilinx */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}}, 0x1, 0x0}, /* mini PCI */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/traverse/geos/romstage.c b/src/mainboard/traverse/geos/romstage.c deleted file mode 100644 index 1dba4a3716..0000000000 --- a/src/mainboard/traverse/geos/romstage.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <lib.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <northbridge/amd/lx/raminit.h> - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - /* cs5536_disable_internal_uart: disable them for now, set them - * up later... - */ - /* If debug. real setup done in chipset init via devicetree.cb. */ - cs5536_setup_onchipuart(1); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/winent/Kconfig b/src/mainboard/winent/Kconfig deleted file mode 100644 index 8656c4d9d3..0000000000 --- a/src/mainboard/winent/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -if VENDOR_WINENT - -choice - prompt "Mainboard model" - -source "src/mainboard/winent/*/Kconfig.name" - -endchoice - -source "src/mainboard/winent/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Win Enterprise" - -endif # VENDOR_WINENT diff --git a/src/mainboard/winent/pl6064/Kconfig b/src/mainboard/winent/pl6064/Kconfig deleted file mode 100644 index 3a36f29393..0000000000 --- a/src/mainboard/winent/pl6064/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_WINENT_PL6064 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default winent/pl6064 - -config MAINBOARD_PART_NUMBER - string - default "PL6064" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_WINENT_PL6064 diff --git a/src/mainboard/winent/pl6064/Kconfig.name b/src/mainboard/winent/pl6064/Kconfig.name deleted file mode 100644 index dad5eb6ed9..0000000000 --- a/src/mainboard/winent/pl6064/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_WINENT_PL6064 - bool "PL6064" diff --git a/src/mainboard/winent/pl6064/board_info.txt b/src/mainboard/winent/pl6064/board_info.txt deleted file mode 100644 index f939cf4e45..0000000000 --- a/src/mainboard/winent/pl6064/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: PL60640 -Category: desktop -Board URL: http://www.win-ent.com/network-computing/network-systems/desktop-platforms/440-pl-60640.html diff --git a/src/mainboard/winent/pl6064/cmos.layout b/src/mainboard/winent/pl6064/cmos.layout deleted file mode 100644 index b238a379d8..0000000000 --- a/src/mainboard/winent/pl6064/cmos.layout +++ /dev/null @@ -1,28 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -456 1 e 1 ECC_memory -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/winent/pl6064/devicetree.cb b/src/mainboard/winent/pl6064/devicetree.cb deleted file mode 100644 index baa7519757..0000000000 --- a/src/mainboard/winent/pl6064/devicetree.cb +++ /dev/null @@ -1,80 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - - device pci d.0 on end # Ethernet 4 - device pci a.0 on end # Ethernet 1 - device pci b.0 on end # Ethernet 2 - device pci c.0 on end # Ethernet 3 - device pci e.0 on end # Slot1 - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a on # ACPI - irq 0x70 = 9 - end - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - device pci f.2 on end # IDE Controller - device pci f.3 off end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/winent/pl6064/irq_tables.c b/src/mainboard/winent/pl6064/irq_tables.c deleted file mode 100644 index 019e713854..0000000000 --- a/src/mainboard/winent/pl6064/irq_tables.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Win Enterprises, Inc (anishp@win-ent.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 5 -#define PIRQD 10 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 0*/ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 1*/ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 2*/ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 3 on 65 - shared switch on 64*/ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x1, 0x0}, /* slot1 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c deleted file mode 100644 index ebef4f69c8..0000000000 --- a/src/mainboard/winent/pl6064/romstage.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Win Enterprises, Inc (anishp@win-ent.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <lib.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <spd.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - winbond_set_clksel_48(SERIAL_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} |