3 files changed, 22 insertions, 2 deletions
diff --git a/src/mainboard/google/rex/Kconfig b/src/mainboard/google/rex/Kconfig
index e98471a394..73f28f335f 100644
--- a/src/mainboard/google/rex/Kconfig
+++ b/src/mainboard/google/rex/Kconfig
@@ -71,6 +71,9 @@ config BOARD_GOOGLE_MODEL_KANIX
 	def_bool n
 	select BOARD_GOOGLE_BASEBOARD_REX
 	select DRIVERS_GENERIC_ALC1015
+	select RT8168_GEN_ACPI_POWER_RESOURCE
+	select RT8168_GET_MAC_FROM_VPD
+	select RT8168_SET_LED_MODE
 	select SOC_INTEL_CSE_LITE_SKU
 	select SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V2
 	select SOC_INTEL_CSE_SEND_EOP_ASYNC
diff --git a/src/mainboard/google/rex/variants/kanix/gpio.c b/src/mainboard/google/rex/variants/kanix/gpio.c
index a319429d66..d9a02f797b 100644
--- a/src/mainboard/google/rex/variants/kanix/gpio.c
+++ b/src/mainboard/google/rex/variants/kanix/gpio.c
@@ -195,8 +195,8 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPI_LOCK(GPP_E02, NONE, LOCK_CONFIG),
 	/* GPP_E03 : [] ==> GSC_SOC_INT_ODL */
 	PAD_CFG_GPI_APIC_LOCK(GPP_E03, NONE, LEVEL, INVERT, LOCK_CONFIG),
-	/* GPP_E04 : [] ==> SOC_PEN_DETECT, test point */
-	PAD_NC(GPP_E04, NONE),
+	/* GPP_E04 : [] ==> SOC_WAKE_L ==> LAN_WAKE_ODL */
+	PAD_CFG_GPI_SCI_LOW(GPP_E04, NONE, DEEP, EDGE_SINGLE),
 	/* GPP_E05 : [] ==> USB_A0_RT_RST_ODL */
 	PAD_CFG_GPO(GPP_E05, 1, DEEP),
 	/* GPP_E06 : GPP_E06_STRAP ==> Component NC */
diff --git a/src/mainboard/google/rex/variants/kanix/overridetree.cb b/src/mainboard/google/rex/variants/kanix/overridetree.cb
index bddabdfb08..d23589b776 100644
--- a/src/mainboard/google/rex/variants/kanix/overridetree.cb
+++ b/src/mainboard/google/rex/variants/kanix/overridetree.cb
@@ -552,6 +552,23 @@ chip soc/intel/meteorlake
 				device generic 0 on end
 			end
 		end	#PCIE5 WLAN card
+		device ref pcie_rp6 on
+			chip drivers/net
+				register "wake" = "GPE0_DW1_04"
+				register "led_feature" = "0xe0"
+				register "customized_led0" = "0x23f"
+				register "customized_led2" = "0x028"
+				register "enable_aspm_l1_2" = "1"
+				register "add_acpi_dma_property" = "true"
+				device pci 00.0 on end
+			end
+			# Enable PCIE 6 using clk 6
+			register "pcie_rp[PCH_RP(6)]" = "{
+				.clk_src = 6,
+				.clk_req = 6,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+		end # RTL8125 Ethernet NIC
 		device ref gspi1 on
 			chip drivers/spi/acpi
 				register "name" = ""CRFP""