diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/drivers/amd/agesa/Makefile.inc | 2 | ||||
| -rw-r--r-- | src/drivers/amd/agesa/cache_as_ram.S | 58 | ||||
| -rw-r--r-- | src/drivers/amd/agesa/exit_car.S | 37 | ||||
| -rw-r--r-- | src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc | 29 | ||||
| -rw-r--r-- | src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc | 29 | ||||
| -rw-r--r-- | src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc | 29 |
6 files changed, 45 insertions, 139 deletions
diff --git a/src/drivers/amd/agesa/Makefile.inc b/src/drivers/amd/agesa/Makefile.inc index fb46d91991..dfb385da80 100644 --- a/src/drivers/amd/agesa/Makefile.inc +++ b/src/drivers/amd/agesa/Makefile.inc @@ -20,7 +20,7 @@ romstage-y += state_machine.c ramstage-y += state_machine.c cpu_incs-y += $(src)/drivers/amd/agesa/cache_as_ram.S -postcar-y += cache_as_ram.S +postcar-y += exit_car.S romstage-y += def_callouts.c romstage-y += eventlog.c diff --git a/src/drivers/amd/agesa/cache_as_ram.S b/src/drivers/amd/agesa/cache_as_ram.S index dcb0c43d8e..3f1358a2f8 100644 --- a/src/drivers/amd/agesa/cache_as_ram.S +++ b/src/drivers/amd/agesa/cache_as_ram.S @@ -27,7 +27,6 @@ .code32 .globl _cache_as_ram_setup, _cache_as_ram_setup_end -.globl chipset_teardown_car _cache_as_ram_setup: @@ -105,66 +104,11 @@ _cache_as_ram_setup: pushl %eax call romstage_main -#if CONFIG(POSTCAR_STAGE) - -/* We do not return. Execution continues with run_postcar_phase() - * calling to chipset_teardown_car below. - */ - jmp postcar_entry_failure - -chipset_teardown_car: - -/* - * Retrieve return address from stack as it will get trashed below if - * execution is utilizing the cache-as-ram stack. - */ - pop %esp - -#else - - movl %eax, %esp - -/* Register %esp is new stacktop for remaining of romstage. */ - -#endif - - /* Disable cache */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - -/* Register %esp is preserved in AMD_DISABLE_STACK. */ - AMD_DISABLE_STACK - -#if CONFIG(POSTCAR_STAGE) - - jmp *%esp - -#else - - /* enable cache */ - movl %cr0, %eax - andl $0x9fffffff, %eax - movl %eax, %cr0 - - call romstage_after_car - -#endif - /* Should never see this postcode */ - post_code(0xaf) + post_code(0xae) stop: hlt jmp stop -/* These are here for linking purposes. */ -.weak early_all_cores, romstage_main -early_all_cores: -romstage_main: -postcar_entry_failure: - /* Should never see this postcode */ - post_code(0xae) - jmp stop - _cache_as_ram_setup_end: diff --git a/src/drivers/amd/agesa/exit_car.S b/src/drivers/amd/agesa/exit_car.S new file mode 100644 index 0000000000..f9d056e599 --- /dev/null +++ b/src/drivers/amd/agesa/exit_car.S @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <gcccar.inc> +#include <cpu/x86/cache.h> + +.code32 +.globl chipset_teardown_car + +chipset_teardown_car: + pop %esp + + /* Disable cache */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + AMD_DISABLE_STACK + + /* enable cache */ + movl %cr0, %eax + andl $(~(CR0_CD | CR0_NW)), %eax + movl %eax, %cr0 + + jmp *%esp diff --git a/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc index 75ba9e7df5..4d903e686f 100644 --- a/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc +++ b/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc @@ -696,13 +696,6 @@ fam15_enable_stack_hook_exit: * Return any family specific controls to their 'standard' * settings for using cache with main memory. * -* Note: Customized for coreboot: -* A wbinvd is used to send cache to memory. The existing stack is preserved -* at its original location and additional information is preserved (e.g. -* coreboot CAR globals, heap structures, etc.). This implementation should -* NOT be used with S3 resume IF the stack/cache area is not reserved and -* over system memory. -* * Inputs: * ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# * Outputs: @@ -911,16 +904,7 @@ fam15_disable_stack_remote_read_exit: btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion _WRMSR - #-------------------------------------------------------------------------- - # Send cache to memory. Preserve stack and coreboot CAR globals. - # This shouldn't be used with S3 resume IF the stack/cache area is - # not reserved and over system memory. - #-------------------------------------------------------------------------- -#if !CONFIG(POSTCAR_STAGE) - wbinvd -#else invd -#endif #.if (bh == 01h) || (bh == 03h) ; Is this TN or KV? cmp $01, %bh @@ -1563,17 +1547,8 @@ ClearTheStack: # Stack base is in SS, stack pointer is .endm /***************************************************************************** -* AMD_DISABLE_STACK: Implementation is modified for coreboot from -* the original AMD intent. A WBINVD is used in the HOOK -* to send dirty cache contents to DRAM backing before -* disabling cache-as-ram. This is not safe for S3 resume. -* -* todo: -* * rework PI/AGESA source to set DRAM to UC to send -* writes directly to memory -* * move DCACHE_BASE or use postcar stage for teardown -* to eliminate car_migrated problem that will occur -* after wbinvd is changed back to invd +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP * * In: * none diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc index 8f3ca83598..b208cc14ca 100644 --- a/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc @@ -401,13 +401,6 @@ fam15_enable_stack_hook_exit: * Return any family specific controls to their 'standard' * settings for using cache with main memory. * -* Note: Customized for coreboot: -* A wbinvd is used to send cache to memory. The existing stack is preserved -* at its original location and additional information is preserved (e.g. -* coreboot CAR globals, heap structures, etc.). This implementation should -* NOT be used with S3 resume IF the stack/cache area is not reserved and -* over system memory. -* * Inputs: * ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# * Outputs: @@ -646,16 +639,7 @@ fam15_disable_stack_remote_read_exit: btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion _WRMSR - #-------------------------------------------------------------------------- - # Send cache to memory. Preserve stack and coreboot CAR globals. - # This shouldn't be used with S3 resume IF the stack/cache area is - # not reserved and over system memory. - #-------------------------------------------------------------------------- -#if !CONFIG(POSTCAR_STAGE) - wbinvd -#else invd -#endif # #.if (bh == 01h) || (bh == 03h) ; Is this TN or KM? # cmp $01, %bh @@ -1302,17 +1286,8 @@ ClearTheStack: # Stack base is in SS, stack pointer is .endm /***************************************************************************** -* AMD_DISABLE_STACK: Implementation is modified for coreboot from -* the original AMD intent. A WBINVD is used in the HOOK -* to send dirty cache contents to DRAM backing before -* disabling cache-as-ram. This is not safe for S3 resume. -* -* todo: -* * rework PI/AGESA source to set DRAM to UC to send -* writes directly to memory -* * move DCACHE_BASE or use postcar stage for teardown -* to eliminate car_migrated problem that will occur -* after wbinvd is changed back to invd +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP * * In: * none diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc index 357b8be6d5..7d86a31c69 100644 --- a/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc @@ -383,13 +383,6 @@ fam16_enable_stack_hook_exit: ; Return any family specific controls to their 'standard' ; settings for using cache with main memory. ; -; Note: Customized for coreboot: -; A wbinvd is used to send cache to memory. The existing stack is preserved -; at its original location and additional information is preserved (e.g. -; coreboot CAR globals, heap structures, etc.). This implementation should -; NOT be used with S3 resume IF the stack/cache area is not reserved and -; over system memory. -; ; Inputs: ; ESI - [31:24] flags; [15:8]= Node#; [7:0]= core# ; Outputs: @@ -610,16 +603,7 @@ fam16_disable_stack_remote_read_exit: btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion _WRMSR - #-------------------------------------------------------------------------- - # Send cache to memory. Preserve stack and coreboot CAR globals. - # This shouldn't be used with S3 resume IF the stack/cache area is - # not reserved and over system memory. - #-------------------------------------------------------------------------- -#if !CONFIG(POSTCAR_STAGE) - wbinvd -#else invd -#endif #Do Standard Family 16 work mov $HWCR, %ecx # MSR:C001_0015h @@ -1276,17 +1260,8 @@ ClearTheStack: # Stack base is in SS, stack pointer is .endm /***************************************************************************** -* AMD_DISABLE_STACK: Implementation is modified for coreboot from -* the original AMD intent. A WBINVD is used in the HOOK -* to send dirty cache contents to DRAM backing before -* disabling cache-as-ram. This is not safe for S3 resume. -* -* todo: -* * rework PI/AGESA source to set DRAM to UC to send -* writes directly to memory -* * move DCACHE_BASE or use postcar stage for teardown -* to eliminate car_migrated problem that will occur -* after wbinvd is changed back to invd +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP * * In: * none |