summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/kgpe-d16/Kconfig87
-rw-r--r--src/mainboard/asus/kgpe-d16/Kconfig.name2
-rw-r--r--src/mainboard/asus/kgpe-d16/acpi/pm_ctrl.asl367
-rw-r--r--src/mainboard/asus/kgpe-d16/acpi_tables.c75
-rw-r--r--src/mainboard/asus/kgpe-d16/board_info.txt5
-rw-r--r--src/mainboard/asus/kgpe-d16/bootblock.c52
-rw-r--r--src/mainboard/asus/kgpe-d16/cmos.default16
-rw-r--r--src/mainboard/asus/kgpe-d16/cmos.layout134
-rw-r--r--src/mainboard/asus/kgpe-d16/devicetree.cb240
-rw-r--r--src/mainboard/asus/kgpe-d16/dsdt.asl730
-rw-r--r--src/mainboard/asus/kgpe-d16/get_bus_conf.c125
-rw-r--r--src/mainboard/asus/kgpe-d16/irq_tables.c113
-rw-r--r--src/mainboard/asus/kgpe-d16/mainboard.c81
-rw-r--r--src/mainboard/asus/kgpe-d16/mb_sysconf.h44
-rw-r--r--src/mainboard/asus/kgpe-d16/mptable.c231
-rw-r--r--src/mainboard/asus/kgpe-d16/resourcemap.c284
-rw-r--r--src/mainboard/asus/kgpe-d16/romstage.c422
-rw-r--r--src/mainboard/asus/kgpe-d16/spd_notes.txt30
18 files changed, 3038 insertions, 0 deletions
diff --git a/src/mainboard/asus/kgpe-d16/Kconfig b/src/mainboard/asus/kgpe-d16/Kconfig
new file mode 100644
index 0000000000..b7b5ea1686
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/Kconfig
@@ -0,0 +1,87 @@
+if BOARD_ASUS_KGPE_D16
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_SOCKET_G34_NON_AGESA
+ select DIMM_DDR3
+ select DIMM_REGISTERED
+ # select QRANK_DIMM_SUPPORT
+ select NORTHBRIDGE_AMD_AMDFAM10
+ select SOUTHBRIDGE_AMD_SR5650
+ select SOUTHBRIDGE_AMD_SB700
+ select SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA
+ select SUPERIO_NUVOTON_NCT5572D
+ select PARALLEL_CPU_INIT
+ select HAVE_HARD_RESET
+ select HAVE_OPTION_TABLE
+ select HAVE_CMOS_DEFAULT
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_TABLES
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select LIFT_BSP_APIC_ID
+ select BOARD_ROMSIZE_KB_2048
+ select ENABLE_APIC_EXT_ID
+ select MMCONF_SUPPORT_DEFAULT
+ select DRIVERS_I2C_W83795
+ select DRIVERS_ASPEED_AST2050
+ select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG
+
+config MAINBOARD_DIR
+ string
+ default "asus/kgpe-d16"
+
+config BOOTBLOCK_MAINBOARD_INIT
+ string
+ default "mainboard/asus/kgpe-d16/bootblock.c"
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc2000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x1e000
+
+config APIC_ID_OFFSET
+ hex
+ default 0
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "KGPE-D16"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x100000
+
+config MAX_CPUS
+ int
+ default 32
+
+# 2 (internal) processors per G34 socket
+config MAX_PHYSICAL_CPUS
+ int
+ default 4
+
+config HT_CHAIN_UNITID_BASE
+ hex
+ default 0x0
+
+config HT_CHAIN_END_UNITID_BASE
+ hex
+ default 0x20
+
+config IRQ_SLOT_COUNT
+ int
+ default 13
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+ bool
+ default y
+
+endif # BOARD_ASUS_KGPE_D16
diff --git a/src/mainboard/asus/kgpe-d16/Kconfig.name b/src/mainboard/asus/kgpe-d16/Kconfig.name
new file mode 100644
index 0000000000..bdfa31ad1c
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ASUS_KGPE_D16
+ bool "KGPE-D16"
diff --git a/src/mainboard/asus/kgpe-d16/acpi/pm_ctrl.asl b/src/mainboard/asus/kgpe-d16/acpi/pm_ctrl.asl
new file mode 100644
index 0000000000..bd36a2cfc0
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/acpi/pm_ctrl.asl
@@ -0,0 +1,367 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Raptor Engineering
+ * Copyright (C) 2009 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * WARNING: Sleep/Wake is a work in progress and is still somewhat flaky!
+ */
+
+ /* Port 80 POST card debug */
+ OperationRegion (DBG0, SystemIO, 0x80, One)
+ Field (DBG0, ByteAcc, NoLock, Preserve) {
+ DBG8, 8
+ }
+
+ /* SuperIO control port */
+ Name (SPIO, 0x2E)
+
+ /* SuperIO control map */
+ OperationRegion (SPIM, SystemIO, SPIO, 0x02)
+ Field (SPIM, ByteAcc, NoLock, Preserve) {
+ INDX, 8,
+ DATA, 8
+ }
+
+ /* SuperIO control registers */
+ IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) {
+ Offset (0x07),
+ CR07, 8, /* Logical device number */
+ Offset (0x2C),
+ CR2C, 8, /* GPIO3 multiplexed pin selection */
+ Offset (0x30),
+ CR30, 8, /* Logical device activation control register */
+ Offset (0xE0),
+ CRE0, 8, /* Wake control register */
+ Offset (0xE6),
+ CRE6, 8, /* Mouse wake event configuration register */
+ Offset (0xF1),
+ CRF1, 8, /* GPIO3 data register */
+ Offset (0xF3),
+ CRF3, 8, /* SUSLED mode register */
+ Offset (0xF6),
+ CRF6, 8, /* SMI/PME event generation control register */
+ Offset (0xF9),
+ CRF9, 8, /* ACPI PME configuration register */
+ }
+
+ /* Power Management I/O registers */
+ OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+ Field(PIOR, ByteAcc, NoLock, Preserve) {
+ PIOI, 0x00000008,
+ PIOD, 0x00000008,
+ }
+ IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+ Offset(0x00), /* MiscControl */
+ , 1,
+ T1EE, 1,
+ T2EE, 1,
+ Offset(0x01), /* MiscStatus */
+ , 1,
+ T1E, 1,
+ T2E, 1,
+ Offset(0x04), /* SmiWakeUpEventEnable3 */
+ , 7,
+ SSEN, 1,
+ Offset(0x07), /* SmiWakeUpEventStatus3 */
+ , 7,
+ CSSM, 1,
+ Offset(0x10), /* AcpiEnable */
+ , 6,
+ PWDE, 1,
+ Offset(0x1C), /* ProgramIoEnable */
+ , 3,
+ MKME, 1,
+ IO3E, 1,
+ IO2E, 1,
+ IO1E, 1,
+ IO0E, 1,
+ Offset(0x1D), /* IOMonitorStatus */
+ , 3,
+ MKMS, 1,
+ IO3S, 1,
+ IO2S, 1,
+ IO1S, 1,
+ IO0S,1,
+ Offset(0x20), /* AcpiPmEvtBlk */
+ APEB, 16,
+ Offset(0x36), /* GEvtLevelConfig */
+ , 6,
+ ELC6, 1,
+ ELC7, 1,
+ Offset(0x37), /* GPMLevelConfig0 */
+ , 3,
+ PLC0, 1,
+ PLC1, 1,
+ PLC2, 1,
+ PLC3, 1,
+ PLC8, 1,
+ Offset(0x38), /* GPMLevelConfig1 */
+ , 1,
+ PLC4, 1,
+ PLC5, 1,
+ , 1,
+ PLC6, 1,
+ PLC7, 1,
+ Offset(0x3B), /* PMEStatus1 */
+ GP0S, 1,
+ GM4S, 1,
+ GM5S, 1,
+ APS, 1,
+ GM6S, 1,
+ GM7S, 1,
+ GP2S, 1,
+ STSS, 1,
+ Offset(0x55), /* SoftPciRst */
+ SPRE, 1,
+ , 1,
+ , 1,
+ PNAT, 1,
+ PWMK, 1,
+ PWNS, 1,
+
+ /* Offset(0x61), */ /* Options_1 */
+ /* ,7, */
+ /* R617,1, */
+
+ Offset(0x65), /* UsbPMControl */
+ , 4,
+ URRE, 1,
+ Offset(0x68), /* MiscEnable68 */
+ , 3,
+ TMTE, 1,
+ , 1,
+ Offset(0x7C), /* MiscEnable7C */
+ , 2,
+ BLNK, 2,
+ Offset(0x92), /* GEVENTIN */
+ , 7,
+ E7IS, 1,
+ Offset(0x96), /* GPM98IN */
+ G8IS, 1,
+ G9IS, 1,
+ Offset(0x9A), /* EnhanceControl */
+ ,7,
+ HPDE, 1,
+ Offset(0xA8), /* PIO7654Enable */
+ IO4E, 1,
+ IO5E, 1,
+ IO6E, 1,
+ IO7E, 1,
+ Offset(0xA9), /* PIO7654Status */
+ IO4S, 1,
+ IO5S, 1,
+ IO6S, 1,
+ IO7S, 1,
+ }
+
+ /* PM1 Event Block
+ * First word is PM1_Status, Second word is PM1_Enable
+ */
+ OperationRegion(P1EB, SystemIO, APEB, 0x04)
+ Field(P1EB, ByteAcc, NoLock, Preserve) {
+ TMST, 1,
+ , 3,
+ BMST, 1,
+ GBST, 1,
+ Offset(0x01),
+ PBST, 1,
+ , 1,
+ RTST, 1,
+ , 3,
+ PWST, 1,
+ SPWS, 1,
+ Offset(0x02),
+ TMEN, 1,
+ , 4,
+ GBEN, 1,
+ Offset(0x03),
+ PBEN, 1,
+ , 1,
+ RTEN, 1,
+ , 3,
+ PWDA, 1,
+ }
+
+ /* Wake status package */
+ Name(WKST,Package(){Zero, Zero})
+
+ /*
+ * \_WAK System Wake method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * Return package of 2 DWords
+ * Dword 1 - Status
+ * 0x00000000 wake succeeded
+ * 0x00000001 Wake was signaled but failed due to lack of power
+ * 0x00000002 Wake was signaled but failed due to thermal condition
+ * Dword 2 - Power Supply state
+ * if non-zero the effective S-state the power supply entered
+ */
+ Method(\_WAK, 1) {
+ Store (0x20, DBG8)
+
+ /* Set up LEDs */
+ /* Set power LED to steady on */
+ Store(0x3, BLNK)
+
+ /* Configure SuperIO for wake */
+ /* Access SuperIO ACPI device */
+ Store(0x87, INDX)
+ Store(0x87, INDX)
+ Store(0x0A, CR07)
+
+ if (LEqual(Arg0, One)) /* Resuming from power state S1 */
+ {
+ /* Deactivate the ACPI device */
+ Store(Zero, CR30)
+
+ /* Disable PS/2 SMI/PME events */
+ And(CRF6, 0xCF, CRF6)
+ }
+ if (Lor(LEqual(Arg0, 0x03), LEqual(Arg0, 0x04))) /* Resuming from power state S3 or S4 */
+ {
+ /* Disable PS/2 wake */
+ And(CRE0, 0x1D, CRE0)
+ And(CRE6, 0x7F, CRE6)
+ }
+
+ /* Restore default SuperIO access */
+ Store(0xAA, INDX)
+
+ Store (0x21, DBG8)
+
+ /* Re-enable HPET */
+ Store(1, HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0, 3)){
+ Store(1, URRE)
+ }
+
+ /* Configure southbridge for wake */
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, PWST)
+
+ Store (0x22, DBG8)
+
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+
+ Return(WKST)
+ }
+
+ /*
+ * \_PTS - Prepare to Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2, etc
+ *
+ * Exit:
+ * -none-
+ *
+ * The _PTS control method is executed at the beginning of the sleep process
+ * for S1-S5. The sleeping value is passed to the _PTS control method. This
+ * control method may be executed a relatively long time before entering the
+ * sleep state and the OS may abort the operation without notification to
+ * the ACPI driver. This method cannot modify the configuration or power
+ * state of any device in the system.
+ */
+ Method(\_PTS, 1) {
+ Store (Arg0, DBG8)
+
+ /* Set up LEDs */
+ if (LEqual(Arg0, One)) /* Power state S1 requested */
+ {
+ /* Set suspend LED to 0.25Hz toggle pulse with 50% duty cycle */
+ Store(0x2, BLNK)
+ }
+ if (LEqual(Arg0, 0x3)) /* Power state S3 requested */
+ {
+ /* Set suspend LED to 0.25Hz toggle pulse with 25% duty cycle */
+ Store(0x1, BLNK)
+ }
+
+ /* Configure SuperIO for sleep */
+ /* Access SuperIO ACPI device */
+ Store(0x87, INDX)
+ Store(0x87, INDX)
+ Store(0x0A, CR07)
+
+ /* Disable PS/2 wakeup and connect PANSW_IN to PANSW_OUT */
+ And(CRE0, 0x1F, CRE0)
+
+ if (LEqual(Arg0, One)) /* Power state S1 requested */
+ {
+ /* Activate the ACPI device */
+ Store(One, CR30)
+
+ /* Disable SMI/PME events for:
+ * LPT
+ * FDC
+ * UART
+ Store(0x00, CRF6)
+
+ /* Enable PS/2 keyboard SMI/PME events */
+ Or(CRF6, 0x10, CRF6)
+
+ /* Enable PS/2 keyboard wake */
+ Or(CRE0, 0x40, CRE0)
+
+ /* Enable PS/2 mouse SMI/PME events */
+ Or(CRF6, 0x20, CRF6)
+
+ /* Enable PS/2 mouse wake */
+ Or(CRE0, 0x20, CRE0)
+ } else {
+ /* Enable PS/2 keyboard wake on any keypress */
+ Or(CRE0, 0x41, CRE0)
+
+ /* Enable PS/2 mouse wake on any click */
+ Or(CRE0, 0x22, CRE0)
+ Or(CRE6, 0x80, CRE6)
+ }
+
+ /* Restore default SuperIO access */
+ Store(0xAA, INDX)
+
+ Store (0x10, DBG8)
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0, 3)){
+ Store(0, URRE)
+ }
+
+ /* Configure southbridge for sleep */
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ // Store(One, CSSM) /* Set ExtEvent0 as SMI# source */
+ // Store(One, SSEN) /* Enable wake on external event 0 */
+
+ /* On older chips, clear PciExpWakeDisEn */
+ // if (LLessEqual(SBRI, 0x13)) {
+ // Store(0, PWDE)
+ // }
+
+ Store (0x11, DBG8)
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ }
diff --git a/src/mainboard/asus/kgpe-d16/acpi_tables.c b/src/mainboard/asus/kgpe-d16/acpi_tables.c
new file mode 100644
index 0000000000..4e98dfe731
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/acpi_tables.c
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ device_t dev;
+ u32 dword;
+ u32 gsi_base=0;
+ uint32_t apicid_sp5100;
+ uint32_t apicid_sr5650;
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ apicid_sp5100 = 0x20;
+ apicid_sr5650 = apicid_sp5100 + 1;
+
+ /* Write SB700 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, apicid_sp5100,
+ IO_APIC_ADDR, gsi_base);
+ /* IOAPIC on rs5690 */
+ gsi_base += 24; /* SB700 has 24 IOAPIC entries. */
+ dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ if (dev) {
+ pci_write_config32(dev, 0xF8, 0x1);
+ dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, apicid_sr5650,
+ dword, gsi_base);
+ }
+
+ /* bus, source, gsirq, flags */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1);
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/asus/kgpe-d16/board_info.txt b/src/mainboard/asus/kgpe-d16/board_info.txt
new file mode 100644
index 0000000000..788888e869
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/board_info.txt
@@ -0,0 +1,5 @@
+Category: server
+ROM package: PLCC-32
+ROM protocol: LPC
+ROM socketed: y
+Flashrom support: y \ No newline at end of file
diff --git a/src/mainboard/asus/kgpe-d16/bootblock.c b/src/mainboard/asus/kgpe-d16/bootblock.c
new file mode 100644
index 0000000000..2e9d70f391
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/bootblock.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <pc80/mc146818rtc.h>
+
+void bootblock_mainboard_init(void)
+{
+ uint8_t recovery_enabled;
+ unsigned char addr;
+ unsigned char byte;
+
+ bootblock_northbridge_init();
+ bootblock_southbridge_init();
+
+ /* Recovery jumper is connected to SP5100 GPIO61, and clears the GPIO when placed in the Recovery position */
+ recovery_enabled = (!(pci_read_config8(PCI_DEV(0, 0x14, 0), 0x57) & 0x1));
+ if (recovery_enabled) {
+#if CONFIG_USE_OPTION_TABLE
+ /* Clear NVRAM checksum */
+ for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
+ cmos_write(0x0, addr);
+ }
+
+ /* Set fallback boot */
+ byte = cmos_read(RTC_BOOT_BYTE);
+ byte &= 0xfc;
+ cmos_write(byte, RTC_BOOT_BYTE);
+#else
+ /* FIXME
+ * Figure out how to recover if the option table is not available
+ */
+#endif
+ }
+} \ No newline at end of file
diff --git a/src/mainboard/asus/kgpe-d16/cmos.default b/src/mainboard/asus/kgpe-d16/cmos.default
new file mode 100644
index 0000000000..cffdd030ee
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/cmos.default
@@ -0,0 +1,16 @@
+baud_rate = 115200
+debug_level = Spew
+multi_core = Enable
+slow_cpu = off
+iommu = Disable
+nmi = Disable
+hypertransport_speed_limit = Auto
+max_mem_clock = DDR3-1600
+ECC_memory = Enable
+ECC_redirection = Disable
+ecc_scrub_rate = 1.28us
+interleave_chip_selects = Enable
+interleave_nodes = Disable
+interleave_memory_channels = Enable
+power_on_after_fail = On
+boot_option = Fallback
diff --git a/src/mainboard/asus/kgpe-d16/cmos.layout b/src/mainboard/asus/kgpe-d16/cmos.layout
new file mode 100644
index 0000000000..bcf9cd3ef0
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/cmos.layout
@@ -0,0 +1,134 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+393 3 e 5 baud_rate
+396 5 e 10 ecc_scrub_rate
+401 1 e 1 interleave_chip_selects
+402 1 e 1 interleave_nodes
+403 1 e 1 interleave_memory_channels
+404 2 e 8 max_mem_clock
+406 1 e 2 multi_core
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+446 2 e 3 power_on_after_fail
+456 1 e 1 ECC_memory
+457 1 e 1 ECC_redirection
+458 4 e 11 hypertransport_speed_limit
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+3 0 Off
+3 1 On
+3 2 Last
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 0 Emergency
+6 1 Alert
+6 2 Critical
+6 3 Error
+6 4 Warning
+6 5 Notice
+6 6 Information
+6 7 Debug
+6 8 Spew
+8 0 DDR3-1600
+8 1 DDR3-1333
+8 2 DDR3-1066
+8 3 DDR3-800
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+10 0 Disabled
+10 1 40ns
+10 2 80ns
+10 3 160ns
+10 4 320ns
+10 5 640ns
+10 6 1.28us
+10 7 2.56us
+10 8 5.12us
+10 9 10.2us
+10 10 20.5us
+10 11 41us
+10 12 81.9us
+10 13 163.8us
+10 14 327.7us
+10 15 655.4us
+10 16 1.31ms
+10 17 2.62ms
+10 18 5.24ms
+10 19 10.49ms
+10 20 20.97ms
+10 21 42ms
+10 22 84ms
+11 0 Auto
+11 1 2.6GHz
+11 2 2.4GHz
+11 3 2.2GHz
+11 4 2.0GHz
+11 5 1.8GHz
+11 6 1.6GHz
+11 7 1.4GHz
+11 8 1.2GHz
+11 9 1.0GHz
+11 10 800MHz
+11 11 600MHz
+11 12 500MHz
+11 13 400MHz
+11 14 300MHz
+11 15 200MHz
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/asus/kgpe-d16/devicetree.cb b/src/mainboard/asus/kgpe-d16/devicetree.cb
new file mode 100644
index 0000000000..f949393835
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/devicetree.cb
@@ -0,0 +1,240 @@
+chip northbridge/amd/amdfam10/root_complex # Root complex
+ device cpu_cluster 0 on # (L)APIC cluster
+ chip cpu/amd/socket_F_1207 # CPU socket
+ device lapic 0 on end # Local APIC of the CPU
+ end
+ end
+ device domain 0 on # PCI domain
+ subsystemid 0x1043 0x8163 inherit
+ chip northbridge/amd/amdfam10 # Northbridge / RAM controller
+ register "maximum_memory_capacity" = "0x4000000000" # 256GB
+ device pci 18.0 on end # Link 0 == LDT 0
+ device pci 18.0 on end # Link 1 == LDT 1
+ device pci 18.0 on end # Link 2 == LDT 2
+ device pci 18.0 on # Link 3 == LDT 3 [SB on link 3]
+ chip southbridge/amd/sr5650 # Primary southbridge
+ device pci 0.0 on end # HT Root Complex 0x9600
+ device pci 0.1 on end # CLKCONFIG
+ device pci 2.0 on # PCIE P2P bridge 0x9603 (GPP1 Port0)
+ # Slot # PCI E 1 / PCI E 2
+ end
+ device pci 3.0 off end # PCIE P2P bridge 0x960b (GPP1 Port1)
+ device pci 4.0 on # PCIE P2P bridge 0x9604 (GPP3a Port0)
+ # PIKE SAS
+ end
+ device pci 5.0 off end # PCIE P2P bridge 0x9605 (GPP3a Port1)
+ device pci 6.0 off end # PCIE P2P bridge 0x9606 (GPP3a Port2)
+ device pci 7.0 off end # PCIE P2P bridge 0x9607 (GPP3a Port3)
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ device pci 9.0 on # Bridge (GPP3a Port4)
+ # Onboard # NIC A
+ end
+ device pci a.0 on # Bridge (GPP3a Port5)
+ # Onboard # NIC B
+ end
+ device pci b.0 on # Bridge (GPP2 Port0)
+ # Slot # PCI E 4
+ end
+ device pci c.0 on # Bridge (GPP2 Port1)
+ # Slot # PCI E 5
+ end
+ device pci d.0 on # Bridge (GPP3b Port0)
+ # Slot # PCI E 3
+ end
+ register "gpp1_configuration" = "0" # Configuration 16:0 default
+ register "gpp2_configuration" = "1" # Configuration 8:8
+ #register "gpp3a_configuration" = "2" # Configuration 4:1:1:0:0:0
+ register "gpp3a_configuration" = "11" # Configuration 1:1:1:1:1:1
+ register "port_enable" = "0x3ffc" # Enable all ports except 0 and 1
+ end
+ chip southbridge/amd/sb700 # Secondary southbridge
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.1 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.1 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SM
+ chip drivers/generic/generic # DIMM n-0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic # DIMM n-0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic # DIMM n-0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic # DIMM n-0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic # DIMM n-1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic # DIMM n-1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic # DIMM n-1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic # DIMM n-1-1-1
+ device i2c 57 on end
+ end
+ chip drivers/i2c/w83795
+ register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8
+ register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions
+ register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13
+ register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1
+ register "temp_dtse" = "0x03" # Enable DTS1 and DTS2
+ register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8
+ register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
+ register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1)
+ register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2)
+ register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3)
+ register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4)
+ register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5)
+ register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6)
+ register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1
+ register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2
+ register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3
+ register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4
+ register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5
+ register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6
+ register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C
+ register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C
+ register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C
+ register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C
+ register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C
+ register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C
+ register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C
+ register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C
+ register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
+ register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C
+ register "fan1_nonstop" = "7" # Set Fan 1 minimum speed
+ register "fan2_nonstop" = "7" # Set Fan 2 minimum speed
+ register "fan3_nonstop" = "7" # Set Fan 3 minimum speed
+ register "fan4_nonstop" = "7" # Set Fan 4 minimum speed
+ register "fan5_nonstop" = "7" # Set Fan 5 minimum speed
+ register "fan6_nonstop" = "7" # Set Fan 6 minimum speed
+ register "fan7_nonstop" = "7" # Set Fan 7 minimum speed
+ register "fan8_nonstop" = "7" # Set Fan 8 minimum speed
+ register "default_speed" = "100" # All fans to full speed on power up
+ register "fan1_duty" = "100" # Fan 1 to full speed
+ register "fan2_duty" = "100" # Fan 2 to full speed
+ register "fan3_duty" = "100" # Fan 3 to full speed
+ register "fan4_duty" = "100" # Fan 4 to full speed
+ register "fan5_duty" = "100" # Fan 5 to full speed
+ register "fan6_duty" = "100" # Fan 6 to full speed
+ register "fan7_duty" = "100" # Fan 7 to full speed
+ register "fan8_duty" = "100" # Fan 8 to full speed
+ register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V
+ register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V
+ register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V
+ register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V
+ register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V
+ register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V
+ register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V
+ register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V
+ register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V
+ register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V
+ register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V
+ register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V
+ register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V
+ register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V
+ register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V
+ register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V
+ register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V
+ register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V
+ register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V
+ register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V
+ register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
+ register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
+ register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V
+ register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V
+ register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
+ register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
+ register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V
+ register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V
+ register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V
+ register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V
+ register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V
+ register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V
+ register "smbus_aux" = "1" # Device located on auxiliary SMBUS controller
+ device i2c 0x2f on end
+ end
+ end
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 off end # HDA 0x4383 (KGPE-D16 omits audio option)
+ device pci 14.3 on # LPC 0x439d (SMBUS primary controller)
+ chip superio/nuvoton/nct5572d # Super I/O
+ device pnp 2e.0 off end # FDC; Not available on the KGPE-D16
+ device pnp 2e.1 off end # LPT1; Not available on the KGPE-D16
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off end # IR: Not available on the KGPE-D16
+ device pnp 2e.5 on # PS/2 keyboard & mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off end # CIR: Not available on the KGPE-D16
+ device pnp 2e.7 off end # GIPO689
+ device pnp 2e.8 off end # WDT
+ device pnp 2e.9 off end # GPIO235
+ device pnp 2e.a on end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ io 0x62 = 0x0000 # SB-TSI currently not implemented
+ irq 0x70 = 5
+ end
+ device pnp 2e.c off end # PECI
+ device pnp 2e.d off end # SUSLED
+ device pnp 2e.e off end # CIRWKUP
+ device pnp 2e.f off end # GPIO_PP_OD
+ end
+ end
+ device pci 14.4 on # Bridge
+ device pci 1.0 on end # VGA
+ device pci 2.0 on end # FireWire
+ device pci 3.0 on # Slot
+ # Slot # PCI 0
+ end
+ end
+ device pci 14.5 on end # USB OHCI2 0x4399
+ end
+ end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 19.0 on end # Socket 0 node 1
+ device pci 19.1 on end
+ device pci 19.2 on end
+ device pci 19.3 on end
+ device pci 19.4 on end
+ device pci 1a.0 on end # Socket 1 node 0
+ device pci 1a.1 on end
+ device pci 1a.2 on end
+ device pci 1a.3 on end
+ device pci 1a.4 on end
+ device pci 1b.0 on end # Socket 1 node 1
+ device pci 1b.1 on end
+ device pci 1b.2 on end
+ device pci 1b.3 on end
+ device pci 1b.4 on end
+ end
+ end
+end
diff --git a/src/mainboard/asus/kgpe-d16/dsdt.asl b/src/mainboard/asus/kgpe-d16/dsdt.asl
new file mode 100644
index 0000000000..bdd1d2df1e
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/dsdt.asl
@@ -0,0 +1,730 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ * Copyright (C) 2005 - 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * WARNING: Sleep/Wake is a work in progress and is still somewhat flaky!
+ * Everything else does to the best of my knowledge... (T.P. 01/26/2015)
+ */
+
+/*
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ */
+
+/*
+ * PCI link routing templates taken from ck804.asl and modified for this board
+ */
+
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "ASUS ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00000001 /* OEM Revision */
+ )
+{
+ #include "northbridge/amd/amdfam10/amdfam10_util.asl"
+ #include "southbridge/amd/sr5650/acpi/sr5650.asl"
+
+ /* Some global data */
+ Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PICM, One) /* Assume APIC */
+
+ /* HPET control */
+ Name (SHPB, 0xFED00000)
+ Name (SHPL, 0x1000)
+
+ /* Define power states */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) /* Normal operation */
+ Name (\_S1, Package () { 0x01, 0x01, 0x00, 0x00 }) /* Standby */
+ Name (\_S2, Package () { 0x02, 0x02, 0x00, 0x00 }) /* Standby w/ CPU shutdown */
+ Name (\_S3, Package () { 0x03, 0x00, 0x00, 0x00 }) /* Suspend */
+ /* Name (\_S4, Package () { 0x04, 0x04, 0x00, 0x00 }) */
+ Name (\_S5, Package () { 0x05, 0x05, 0x00, 0x00 }) /* Hard power off */
+
+ /* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+ Method (_PIC, 1, Serialized) {
+ If (Arg0)
+ {
+ \_SB.CIRQ()
+ }
+ Store (Arg0, PICM)
+ }
+
+ /* _PR CPU0 is dynamically supplied by SSDT */
+ /* CPU objects and _PSS entries are dynamically supplied by SSDT */
+
+ Scope(\_GPE) { /* Start Scope GPE */
+ /* General event 3 */
+ Method(_L03) {
+ /* Level-Triggered GPE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* General event 4 */
+ Method(_L04) {
+ /* Level-Triggered GPE */
+ Notify (\_SB.PCI0.PBR0, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Keyboard controller PME# */
+ Method(_L08) {
+ /* Level-Triggered GPE */
+ Notify(\_SB.PCI0.LPC.KBD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.LPC.MOU, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* Level-Triggered GPE */
+ Notify (\_SB.PCI0.USB0, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.USB6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* Level-Triggered GPE */
+ Notify (\_SB.PCI0.PCE1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.NICA, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.NICB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.PCE4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.PCE5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify (\_SB.PCI0.PCE3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ } /* End Scope GPE */
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top southbridge PCI device (SR5690) */
+ Device (PCI0)
+ {
+ /* BUS0 root bus */
+
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00180001)
+ Name (_UID, 0x00)
+
+ Name (HCIN, 0x00) // HC1
+
+ Method (_BBN, 0, NotSerialized)
+ {
+ Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+ }
+
+ /* Operating System Capabilities Method */
+ Method(_OSC,4)
+ {
+ /* Let OS control everything */
+ Return (Arg3)
+ }
+
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+ External (CBST)
+
+ /* PCI Routing Tables */
+ Name (PR00, Package () {
+ /* PIC */
+ /* Top southbridge device (SR5690) */
+ /* HT Link */
+ Package (0x04) { 0x0000FFFF, 0x00, LNKA, 0x00 },
+
+ /* PCI-E Slot 1 (Bridge) */
+ Package (0x04) { 0x0002FFFF, 0x00, LNKE, 0x00 },
+
+ /* NIC A (Bridge) */
+ Package (0x04) { 0x0009FFFF, 0x00, LNKF, 0x00 },
+
+ /* NIC B (Bridge) */
+ Package (0x04) { 0x000AFFFF, 0x00, LNKG, 0x00 },
+
+ /* PCI-E Slot 4 (Bridge) */
+ Package (0x04) { 0x000BFFFF, 0x00, LNKG, 0x00 },
+
+ /* PCI-E Slot 5 (Bridge) */
+ Package (0x04) { 0x000CFFFF, 0x00, LNKG, 0x00 },
+
+ /* PCI-E Slot 3 (Bridge) */
+ Package (0x04) { 0x000DFFFF, 0x00, LNKG, 0x00 },
+
+ /* Bottom southbridge device (SP5100) */
+ /* SATA 0 */
+ Package (0x04) { 0x0011FFFF, 0x00, LNKG, 0x00 },
+
+ /* USB 0 */
+ Package (0x04) { 0x0012FFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0x0012FFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0x0012FFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0x0012FFFF, 0x03, LNKD, 0x00 },
+
+ /* USB 1 */
+ Package (0x04) { 0x0013FFFF, 0x00, LNKC, 0x00 },
+ Package (0x04) { 0x0013FFFF, 0x01, LNKD, 0x00 },
+ Package (0x04) { 0x0013FFFF, 0x02, LNKA, 0x00 },
+ Package (0x04) { 0x0013FFFF, 0x03, LNKB, 0x00 },
+
+ /* SMBUS / IDE / LPC / VGA / FireWire / PCI Slot 0 */
+ Package (0x04) { 0x0014FFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0x0014FFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0x0014FFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0x0014FFFF, 0x03, LNKD, 0x00 },
+ })
+
+ Name (AR00, Package () {
+ /* APIC */
+ /* Top southbridge device (SR5690) */
+ /* HT Link */
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 55 },
+
+ /* PCI-E Slot 1 (Bridge) */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 52 },
+
+ /* NIC A (Bridge) */
+ Package (0x04) { 0x0009FFFF, 0x00, 0x00, 53 },
+
+ /* NIC B (Bridge) */
+ Package (0x04) { 0x000AFFFF, 0x00, 0x00, 54 },
+
+ /* PCI-E Slot 4 (Bridge) */
+ Package (0x04) { 0x000BFFFF, 0x00, 0x00, 54 },
+
+ /* PCI-E Slot 5 (Bridge) */
+ Package (0x04) { 0x000CFFFF, 0x00, 0x00, 54 },
+
+ /* PCI-E Slot 3 (Bridge) */
+ Package (0x04) { 0x000DFFFF, 0x00, 0x00, 54 },
+
+ /* Bottom southbridge device (SP5100) */
+ /* SATA 0 */
+ Package (0x04) { 0x0011FFFF, 0x00, 0x00, 22 },
+
+ /* USB 0 */
+ Package (0x04) { 0x0012FFFF, 0x00, 0x00, 16 },
+ Package (0x04) { 0x0012FFFF, 0x01, 0x00, 17 },
+ Package (0x04) { 0x0012FFFF, 0x02, 0x00, 18 },
+ Package (0x04) { 0x0012FFFF, 0x03, 0x00, 19 },
+
+ /* USB 1 */
+ Package (0x04) { 0x0013FFFF, 0x00, 0x00, 18 },
+ Package (0x04) { 0x0013FFFF, 0x01, 0x00, 19 },
+ Package (0x04) { 0x0013FFFF, 0x02, 0x00, 16 },
+ Package (0x04) { 0x0013FFFF, 0x03, 0x00, 17 },
+
+ /* SMBUS / IDE / LPC / VGA / FireWire / PCI Slot 0 */
+ Package (0x04) { 0x0014FFFF, 0x00, 0x00, 16 },
+ Package (0x04) { 0x0014FFFF, 0x01, 0x00, 17 },
+ Package (0x04) { 0x0014FFFF, 0x02, 0x00, 18 },
+ Package (0x04) { 0x0014FFFF, 0x03, 0x00, 19 },
+ })
+
+ Name (PR01, Package () {
+ /* PIC */
+ Package (0x04) { 0x1FFFF, 0x00, LNKF, 0x00 },
+ Package (0x04) { 0x2FFFF, 0x00, LNKE, 0x00 },
+ Package (0x04) { 0x3FFFF, 0x00, LNKG, 0x00 },
+ Package (0x04) { 0x3FFFF, 0x01, LNKH, 0x00 },
+ Package (0x04) { 0x3FFFF, 0x02, LNKE, 0x00 },
+ Package (0x04) { 0x3FFFF, 0x03, LNKF, 0x00 },
+ })
+
+ Name (AR01, Package () {
+ /* APIC */
+ Package (0x04) { 0x1FFFF, 0x00, 0x00, 21 },
+ Package (0x04) { 0x2FFFF, 0x00, 0x00, 20 },
+ Package (0x04) { 0x3FFFF, 0x00, 0x00, 22 },
+ Package (0x04) { 0x3FFFF, 0x01, 0x00, 23 },
+ Package (0x04) { 0x3FFFF, 0x02, 0x00, 20 },
+ Package (0x04) { 0x3FFFF, 0x03, 0x00, 21 },
+ })
+
+ Name (PR02, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 },
+ })
+
+ Name (AR02, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 24 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 25 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 26 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 27 },
+ })
+
+ Name (PR03, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 },
+ })
+
+ Name (AR03, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 48 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 49 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 50 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 51 },
+ })
+
+ Name (PR04, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKH, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKE, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKF, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKG, 0x00 },
+ })
+
+ Name (AR04, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 47 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 44 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 45 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 46 },
+ })
+
+ Name (PR05, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 },
+ })
+
+ Name (AR05, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 32 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 33 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 34 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 35 },
+ })
+
+ Name (PR06, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKE, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKF, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKG, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKH, 0x00 },
+ })
+
+ Name (AR06, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 36 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 37 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 38 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 39 },
+ })
+
+ Name (PR07, Package () {
+ /* PIC */
+ Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 },
+ Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 },
+ Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 },
+ Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 },
+ })
+
+ Name (AR07, Package () {
+ /* APIC */
+ Package (0x04) { 0xFFFF, 0x00, 0x00, 40 },
+ Package (0x04) { 0xFFFF, 0x01, 0x00, 41 },
+ Package (0x04) { 0xFFFF, 0x02, 0x00, 42 },
+ Package (0x04) { 0xFFFF, 0x03, 0x00, 43 },
+ })
+
+ /* PCI Resource Tables */
+
+ /* PCI Resource Settings Access */
+ Method (_CRS, 0, Serialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods below use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table Access */
+ Method (_PRT, 0, NotSerialized) {
+ If (PICM) {
+ Return (AR00)
+ } Else {
+ Return (PR00)
+ }
+ }
+
+ /* 0:11.0 SP5100 SATA 0 */
+ Device(SAT0)
+ {
+ Name (_ADR, 0x00110000) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ #include "southbridge/amd/sb700/acpi/sata.asl"
+ }
+
+ /* 0:12.0 SP5100 USB 0 */
+ Device (USB0)
+ {
+ Name (_ADR, 0x00120000) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:12.1 SP5100 USB 1 */
+ Device (USB1)
+ {
+ Name (_ADR, 0x00120001) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:12.2 SP5100 USB 2 */
+ Device (USB2)
+ {
+ Name (_ADR, 0x00120002) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:13.0 SP5100 USB 3 */
+ Device (USB3)
+ {
+ Name (_ADR, 0x00130000) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:13.1 SP5100 USB 4 */
+ Device (USB4)
+ {
+ Name (_ADR, 0x00130001) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:13.2 SP5100 USB 5 */
+ Device (USB5)
+ {
+ Name (_ADR, 0x00130002) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 0:14.1 SP5100 IDE Controller */
+ Device (IDEC)
+ {
+ Name (_ADR, 0x00140001) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ #include "southbridge/amd/sb700/acpi/ide.asl"
+ }
+
+ /* 0:14.3 SP5100 LPC */
+ Device (LPC) {
+ Name (_HID, EisaId ("PNP0A05"))
+ Name (_ADR, 0x00140003)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Name (_CID, EisaId ("PNP030B"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, Serialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F03"))
+ Name (_CID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, Serialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+
+ /* UART 1 */
+ Device (URT1)
+ {
+ Name (_HID, EisaId ("PNP0501")) // "PNP0501" for UART
+ Name(_PRW, Package () {0x03, 0x04}) // Wake from S1-S4
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f) // Always enable
+ }
+ Name (_PRS, ResourceTemplate() {
+ StartDependentFn(0, 1) {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8)
+ IRQNoFlags() { 4 }
+ } EndDependentFn()
+ })
+ Method (_CRS, 0)
+ {
+ Return(ResourceTemplate() {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8)
+ IRQNoFlags() { 4 }
+ })
+ }
+ }
+
+ /* High Precision Event Timer */
+ Device (HPET)
+ {
+ Name (_HID, EisaId ("PNP0103"))
+ Name (CRS, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadOnly,
+ 0x00000000,
+ 0x00001000,
+ _Y02)
+ IRQNoFlags () {0}
+ IRQNoFlags () {8}
+ })
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT1)
+ CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._LEN, HPT2)
+ Store (SHPB, HPT1)
+ Store (SHPL, HPT2)
+ Return (CRS)
+ }
+
+ }
+ }
+
+ /* 0:14.4 PCI Bridge */
+ Device (PBR0)
+ {
+ Name (_ADR, 0x00140004) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR01)
+ } Else {
+ Return (PR01)
+ }
+ }
+ Device (SLT1)
+ {
+ Name (_ADR, 0xFFFF) // _ADR: Address
+ Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4
+ }
+ }
+
+ /* 0:14.5 SP5100 USB 6 */
+ Device (USB6)
+ {
+ Name (_ADR, 0x00140005) // _ADR: Address
+ Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4
+ }
+
+ /* 2:00.0 PCIe x16 */
+ Device (PCE1)
+ {
+ Name (_ADR, 0x00020000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR02)
+ } Else {
+ Return (PR02)
+ }
+ }
+ Device (SLT1)
+ {
+ Name (_ADR, 0xFFFF) // _ADR: Address
+ Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4
+ }
+ }
+
+ /* 3:00.0 PCIe NIC A */
+ Device (NICA)
+ {
+ Name (_ADR, 0x00090000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR03)
+ } Else {
+ Return (PR03)
+ }
+ }
+ Device (BDC1)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ }
+ }
+
+ /* 4:00.0 PCIe NIC B */
+ Device (NICB)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR04)
+ } Else {
+ Return (PR04)
+ }
+ }
+ Device (BDC2)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ }
+ }
+
+ /* 5:00.0 PCIe x16 */
+ Device (PCE4)
+ {
+ Name (_ADR, 0x000B0000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR05)
+ } Else {
+ Return (PR05)
+ }
+ }
+ Device (SLT1)
+ {
+ Name (_ADR, 0xFFFF) // _ADR: Address
+ Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4
+ }
+ }
+
+ /* 6:00.0 PCIe x16 */
+ Device (PCE5)
+ {
+ Name (_ADR, 0x000C0000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR06)
+ } Else {
+ Return (PR06)
+ }
+ }
+ Device (SLT1)
+ {
+ Name (_ADR, 0xFFFF) // _ADR: Address
+ Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4
+ }
+ }
+
+ /* 7:00.0 PCIe x16 */
+ Device (PCE3)
+ {
+ Name (_ADR, 0x000D0000) // _ADR: Address
+ Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4
+ Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
+ {
+ If (PICM) {
+ Return (AR07)
+ } Else {
+ Return (PR07)
+ }
+ }
+ Device (SLT1)
+ {
+ Name (_ADR, 0xFFFF) // _ADR: Address
+ Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4
+ }
+ }
+ }
+
+ Device (PWRB) { /* Start Power button device */
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
+ Name(_STA, 0x0B) /* sata is invisible */
+ }
+ }
+
+#include "acpi/pm_ctrl.asl"
+
+}
diff --git a/src/mainboard/asus/kgpe-d16/get_bus_conf.c b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
new file mode 100644
index 0000000000..8661ad13de
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
@@ -0,0 +1,125 @@
+ /*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/multicore.h>
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+u8 bus_isa;
+u8 bus_sr5650[14];
+u8 bus_sp5100[2];
+u32 apicid_sp5100;
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+u32 pci1234x[] = {
+ 0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+u32 hcdnx[] = {
+ 0x20202020,
+};
+
+
+u32 sbdn_sr5650;
+u32 sbdn_sp5100;
+
+extern void get_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+ device_t dev;
+ int i;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+ get_bus_conf_done = 1;
+
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for (i = 0; i < sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_pci1234();
+
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
+ sbdn_sr5650 = sysconf.sbdn;
+ sbdn_sp5100 = 0;
+
+ for (i = 0; i < 2; i++) {
+ bus_sp5100[i] = 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(bus_sr5650); i++) {
+ bus_sr5650[i] = 0;
+ }
+
+
+ bus_sr5650[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+ bus_sp5100[0] = bus_sr5650[0];
+
+
+ /* sp5100 */
+ dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4));
+ if (dev) {
+ bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+
+ /* sr5650 */
+ for (i = 1; i < ARRAY_SIZE(bus_sr5650); i++) {
+ dev = dev_find_slot(bus_sr5650[0], PCI_DEVFN(sbdn_sr5650 + i, 0));
+ if (dev) {
+ bus_sr5650[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ if(255 != bus_sr5650[i]) {
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+ }
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+ if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
+ apicid_base = get_apicid_base(1);
+ else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+ apicid_sp5100 = apicid_base + 0;
+}
diff --git a/src/mainboard/asus/kgpe-d16/irq_tables.c b/src/mainboard/asus/kgpe-d16/irq_tables.c
new file mode 100644
index 0000000000..ae72a0f95e
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/irq_tables.c
@@ -0,0 +1,113 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_rs780[8];
+extern u8 bus_sp5100[2];
+extern unsigned long sbdn_sp5100;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sp5100[0];
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = PCI_VENDOR_ID_ATI;
+ pirq->rtr_device = PCI_DEVICE_ID_ATI_SB700_PCI;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/asus/kgpe-d16/mainboard.c b/src/mainboard/asus/kgpe-d16/mainboard.c
new file mode 100644
index 0000000000..47ede34098
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/mainboard.c
@@ -0,0 +1,81 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <southbridge/amd/sb700/sb700.h>
+#include <southbridge/amd/sr5650/cmn.h>
+
+
+void set_pcie_reset(void);
+void set_pcie_dereset(void);
+
+void set_pcie_reset(void)
+{
+ device_t pcie_core_dev;
+
+ pcie_core_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ set_htiu_enable_bits(pcie_core_dev, 0xA8, 0xFFFFFFFF, 0x28282828);
+ set_htiu_enable_bits(pcie_core_dev, 0xA9, 0x000000FF, 0x00000028);
+}
+
+void set_pcie_dereset(void)
+{
+ device_t pcie_core_dev;
+
+ pcie_core_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ set_htiu_enable_bits(pcie_core_dev, 0xA8, 0xFFFFFFFF, 0x6F6F6F6F);
+ set_htiu_enable_bits(pcie_core_dev, 0xA9, 0x000000FF, 0x0000006F);
+}
+
+/*************************************************
+* enable the dedicated function in kgpe-d16 board.
+* This function is called earlier than sr5650_enable.
+*************************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard KGPE-D16 Enable. dev=0x%p\n", dev);
+
+ msr_t msr, msr2;
+
+ /* TOP_MEM: the top of DRAM below 4G */
+ msr = rdmsr(TOP_MEM);
+ printk
+ (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
+
+ /* TOP_MEM2: the top of DRAM above 4G */
+ msr2 = rdmsr(TOP_MEM2);
+ printk
+ (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
+
+ set_pcie_dereset();
+ /* get_ide_dma66(); */
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/asus/kgpe-d16/mb_sysconf.h b/src/mainboard/asus/kgpe-d16/mb_sysconf.h
new file mode 100644
index 0000000000..3a407a61a6
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/mb_sysconf.h
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+ u8 bus_isa;
+ u8 bus_8132_0;
+ u8 bus_8132_1;
+ u8 bus_8132_2;
+ u8 bus_8111_0;
+ u8 bus_8111_1;
+ u8 bus_8132a[31][3];
+ u8 bus_8151[31][2];
+
+ u32 apicid_8111;
+ u32 apicid_8132_1;
+ u32 apicid_8132_2;
+ u32 apicid_8132a[31][2];
+ u32 sbdn3;
+ u32 sbdn3a[31];
+ u32 sbdn5[31];
+};
+
+#endif
diff --git a/src/mainboard/asus/kgpe-d16/mptable.c b/src/mainboard/asus/kgpe-d16/mptable.c
new file mode 100644
index 0000000000..0279f8bc0b
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/mptable.c
@@ -0,0 +1,231 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+extern u8 bus_sr5650[14];
+extern u8 bus_sp5100[2];
+
+extern u32 apicid_sp5100;
+
+extern u32 sbdn_sr5650;
+extern u32 sbdn_sp5100;
+
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u32 apicid_sr5650;
+ device_t dev;
+ uint8_t sp5100_bus_number;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ apicid_sp5100 = 0x20;
+ apicid_sr5650 = apicid_sp5100 + 1;
+
+ mptable_write_buses(mc, NULL, &bus_isa);
+ /* I/O APICs: APIC ID Version State Address */
+ {
+ uint32_t *dword_ptr;
+ uint32_t dword;
+ uint16_t word;
+ uint8_t byte;
+
+ sp5100_bus_number = 0; //bus_sp5100[0]; TODO: why bus_sp5100[0] use same value of bus_sr5650[0] assigned by get_pci1234(), instead of 0.
+
+ dev = dev_find_slot(sp5100_bus_number, PCI_DEVFN(sbdn_sp5100 + 0x14, 0));
+ if (dev) {
+ dword_ptr = (u32 *)(pci_read_config32(dev, 0x74) & 0xfffffff0);
+ smp_write_ioapic(mc, apicid_sp5100, 0x11, dword_ptr);
+
+ /* Initialize interrupt mapping */
+ /* USB 1 & 2 */
+ word = pci_read_config16(dev, 0xbe);
+ word &= ~0x3f3f;
+ word |= 0x0; /* 0: INTA, ...., 7: INTH */
+ word |= (0x1 << 3); /* 0: INTA, ...., 7: INTH */
+ word |= (0x2 << 8); /* 0: INTA, ...., 7: INTH */
+ word |= (0x3 << 11); /* 0: INTA, ...., 7: INTH */
+ pci_write_config16(dev, 0xbe, word);
+
+ /* USB 3 */
+ byte = pci_read_config8(dev, 0x63);
+ byte &= 0xf8;
+ byte |= (0x2 << 4); /* 0: INTA, ...., 7: INTH */
+ pci_write_config8(dev, 0x63, byte);
+
+ dword = pci_read_config32(dev, 0xac);
+
+ /* SATA */
+ dword &= ~(7 << 26);
+ dword |= (0x6 << 26); /* 0: INTA, ...., 7: INTH */
+
+ /* Hide IDE */
+ dword &= ~(0x00080000);
+
+ /* dword_ptr |= 1<<22; PIC and APIC co exists */
+ pci_write_config32(dev, 0xac, dword);
+
+ /*
+ * 00:12.0: PROG SATA : INT F
+ * 00:13.0: INTA USB_0
+ * 00:13.1: INTB USB_1
+ * 00:13.2: INTC USB_2
+ * 00:13.3: INTD USB_3
+ * 00:13.4: INTC USB_4
+ * 00:13.5: INTD USB2
+ * 00:14.1: INTA IDE
+ * 00:14.2: Prog HDA : INT E
+ * 00:14.5: INTB ACI
+ * 00:14.6: INTB MCI
+ */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ if (dev) {
+ pci_write_config32(dev, 0xF8, 0x1);
+ dword_ptr = (u32 *)(pci_read_config32(dev, 0xFC) & 0xfffffff0);
+ smp_write_ioapic(mc, apicid_sr5650, 0x11, dword_ptr);
+ }
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0);
+
+ /* SR5650 devices */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((2)<<2)|(0)), apicid_sr5650, 28); /* Device 2 (LNKE) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((4)<<2)|(0)), apicid_sr5650, 28); /* Device 4 (LNKF) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((9)<<2)|(0)), apicid_sr5650, 29); /* Device 9 (LNKG) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((10)<<2)|(0)), apicid_sr5650, 30); /* Device 10 (LNKG) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((11)<<2)|(0)), apicid_sr5650, 30); /* Device 11 (LNKG) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((12)<<2)|(0)), apicid_sr5650, 30); /* Device 12 (LNKG) */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((13)<<2)|(0)), apicid_sr5650, 30); /* Device 13 (LNKG) */
+
+ dev = dev_find_slot(0, PCI_DEVFN(0x2, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0x2)|(0)), apicid_sr5650, 0); /* card behind dev2 */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0x4, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0x4)|(0)), apicid_sr5650, 0); /* PIKE */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0x9, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0x9)|(0)), apicid_sr5650, 23); /* NIC A */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0xa, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0xa)|(0)), apicid_sr5650, 24); /* NIC B */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0xb, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0xb)|(0)), apicid_sr5650, 0); /* card behind dev11 */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0xc, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0xc)|(0)), apicid_sr5650, 0); /* card behind dev12 */
+ }
+ dev = dev_find_slot(0, PCI_DEVFN(0xd, 0));
+ if (dev && dev->enabled) {
+ uint8_t bus_pci = dev->link_list->secondary;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pci, (((0)<<0xd)|(0)), apicid_sr5650, 0); /* card behind dev13 */
+ }
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, interrupt_signal, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(interrupt_signal)), apicid_sp5100, (pin))
+
+ /* USB1 */
+ PCI_INT(sp5100_bus_number, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */
+ PCI_INT(sp5100_bus_number, 0x12, 0x1, 0x11); /* OHCI1 Port 3~5 */
+
+ /* USB2 */
+ PCI_INT(sp5100_bus_number, 0x13, 0x0, 0x12); /* OHCI0 Port 6~8 */
+ PCI_INT(sp5100_bus_number, 0x13, 0x1, 0x13); /* EHCI Port 6~11 */
+
+ /* USB3 */
+ PCI_INT(sp5100_bus_number, 0x14, 0x3, 0x12); /* OHCI0 Port 12~13 */
+
+ /* SATA */
+ PCI_INT(sp5100_bus_number, 0x11, 0x0, 0x16); /* 6, INTG */
+
+ /* PCI slots */
+ dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_pci, 0x1, 0x0, 0x15);
+ PCI_INT(bus_pci, 0x1, 0x1, 0x16);
+ PCI_INT(bus_pci, 0x1, 0x2, 0x17);
+ PCI_INT(bus_pci, 0x1, 0x3, 0x14);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_pci, 0x2, 0x0, 0x14);
+ PCI_INT(bus_pci, 0x2, 0x1, 0x15);
+ PCI_INT(bus_pci, 0x2, 0x2, 0x16);
+ PCI_INT(bus_pci, 0x2, 0x3, 0x17);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_pci, 0x3, 0x0, 0x16);
+ PCI_INT(bus_pci, 0x3, 0x1, 0x17);
+ PCI_INT(bus_pci, 0x3, 0x2, 0x14);
+ PCI_INT(bus_pci, 0x3, 0x3, 0x15);
+ }
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/asus/kgpe-d16/resourcemap.c b/src/mainboard/asus/kgpe-d16/resourcemap.c
new file mode 100644
index 0000000000..3e240dc3ed
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/resourcemap.c
@@ -0,0 +1,284 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static void setup_mb_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [31:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Link 3
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00000000,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00000000,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Link 3
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00fff110, /* link 3 of cpu 0 --> AMD SR5690 */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independent of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001013,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Link 3
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x05000303, /* link 3 of cpu 0 --> AMD SR5690 */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+
+ int max;
+ max = ARRAY_SIZE(register_values);
+ setup_resource_map(register_values, max);
+}
diff --git a/src/mainboard/asus/kgpe-d16/romstage.c b/src/mainboard/asus/kgpe-d16/romstage.c
new file mode 100644
index 0000000000..9964cfe01e
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/romstage.c
@@ -0,0 +1,422 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <reset.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <timestamp.h>
+#include <lib.h>
+#include <spd.h>
+#include <cpu/amd/model_10xxx_rev.h>
+#include <northbridge/amd/amdfam10/raminit.h>
+#include <northbridge/amd/amdfam10/amdfam10.h>
+#include "lib/delay.c"
+#include <cpu/x86/lapic.h>
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include <superio/nuvoton/common/nuvoton.h>
+#include <superio/nuvoton/nct5572d/nct5572d.h>
+#include <cpu/x86/bist.h>
+// #include "northbridge/amd/amdk8/incoherent_ht.c"
+#include <southbridge/amd/sb700/sb700.h>
+#include <southbridge/amd/sb700/smbus.h>
+#include <southbridge/amd/sr5650/sr5650.h>
+#include "northbridge/amd/amdfam10/debug.c"
+#include "northbridge/amd/amdfam10/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, NCT5572D_SP1)
+
+static void activate_spd_rom(const struct mem_controller *ctrl);
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(SMBUS_AUX_IO_BASE, device, address);
+}
+
+#include <northbridge/amd/amdfam10/amdfam10.h>
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/pci.c"
+#include "resourcemap.c"
+#include "cpu/amd/quadcore/quadcore.c"
+
+#include <cpu/amd/microcode.h>
+
+#include "cpu/amd/model_10xxx/init_cpus.c"
+#include "northbridge/amd/amdfam10/early_ht.c"
+
+/*
+ * ASUS KGPE-D16 specific SPD enable/disable magic.
+ *
+ * Setting SP5100 GPIOs 59 and 60 controls an SPI mux with four settings:
+ * 0: Disabled
+ * 1: Normal SPI access
+ * 2: CPU0 SPD
+ * 3: CPU1 SPD
+ *
+ * Disable SPD access after RAM init to allow access to standard SMBus/I2C offsets
+ * which is required e.g. by lm-sensors.
+ */
+
+/* Relevant GPIO register information is available in the
+ * AMD SP5100 Register Reference Guide rev. 3.03, page 130
+ */
+static void switch_spd_mux(uint8_t channel)
+{
+ uint8_t byte;
+
+ byte = pci_read_config8(PCI_DEV(0, 0x14, 0), 0x54);
+ byte &= ~0xc; /* Clear SPD mux GPIOs */
+ byte &= ~0xc0; /* Enable SPD mux GPIO output drivers */
+ byte |= (channel << 2) & 0xc; /* Set SPD mux GPIOs */
+ pci_write_config8(PCI_DEV(0, 0x14, 0), 0x54, byte);
+}
+
+static const uint8_t spd_addr[] = {
+ // Socket 0 Node 0 ("Node 0")
+ RC00, DIMM0, DIMM1, 0, 0, DIMM2, DIMM3, 0, 0,
+ // Socket 0 Node 1 ("Node 1")
+ RC00, DIMM4, DIMM5, 0, 0, DIMM6, DIMM7, 0, 0,
+ // Socket 1 Node 1 ("Node 2")
+ RC01, DIMM4, DIMM5, 0, 0, DIMM6, DIMM7, 0, 0,
+ // Socket 1 Node 0 ("Node 3")
+ RC01, DIMM0, DIMM1, 0, 0, DIMM2, DIMM3, 0, 0,
+};
+
+static void activate_spd_rom(const struct mem_controller *ctrl) {
+ struct sys_info *sysinfo = &sysinfo_car;
+
+ printk(BIOS_DEBUG, "activate_spd_rom() for node %02x\n", ctrl->node_id);
+ if (ctrl->node_id == 0) {
+ printk(BIOS_DEBUG, "enable_spd_node0()\n");
+ switch_spd_mux(0x2);
+ } else if (ctrl->node_id == 1) {
+ printk(BIOS_DEBUG, "enable_spd_node1()\n");
+ switch_spd_mux((sysinfo->nodes <= 2)?0x2:0x3);
+ } else if (ctrl->node_id == 2) {
+ printk(BIOS_DEBUG, "enable_spd_node2()\n");
+ switch_spd_mux((sysinfo->nodes <= 2)?0x3:0x2);
+ } else if (ctrl->node_id == 3) {
+ printk(BIOS_DEBUG, "enable_spd_node3()\n");
+ switch_spd_mux(0x3);
+ }
+}
+
+/* Voltages are specified by index
+ * Valid indicies for this platform are:
+ * 0: 1.5V
+ * 1: 1.35V
+ * 2: 1.25V
+ * 3: 1.15V
+ */
+static void set_ddr3_voltage(uint8_t node, uint8_t index) {
+ uint8_t byte;
+ uint8_t value;
+
+ if (index == 0)
+ value = 0x0;
+ else if (index == 1)
+ value = 0x1;
+ else if (index == 2)
+ value = 0x4;
+ else if (index == 3)
+ value = 0x5;
+ if (node == 1)
+ value <<= 1;
+
+ /* Set GPIOs */
+ byte = pci_read_config8(PCI_DEV(0, 0x14, 3), 0xd1);
+ if (node == 0)
+ byte &= ~0x5;
+ if (node == 1)
+ byte &= ~0xa;
+ byte |= value;
+ pci_write_config8(PCI_DEV(0, 0x14, 3), 0xd1, byte);
+
+ /* Enable GPIO output drivers */
+ byte = pci_read_config8(PCI_DEV(0, 0x14, 3), 0xd0);
+ byte &= 0x0f;
+ pci_write_config8(PCI_DEV(0, 0x14, 3), 0xd0, byte);
+}
+
+static void set_peripheral_control_lines(void) {
+ uint8_t byte;
+
+ /* Enable PCICLK5 (onboard FireWire device) */
+ outb(0x41, 0xcd6);
+ outb(0x02, 0xcd7);
+
+ /* Enable the RTC AltCentury register */
+ outb(0x41, 0xcd6);
+ byte = inb(0xcd7);
+ byte |= 0x10;
+ outb(byte, 0xcd7);
+}
+
+#ifdef TEST_MEMORY
+static void execute_memory_test(void)
+{
+ /* Test DRAM functionality */
+ uint32_t i;
+ uint32_t* dataptr;
+ printk(BIOS_DEBUG, "Writing test patterns to memory...\n");
+ for (i=0; i < 0x1000000; i = i + 8) {
+ dataptr = (void *)(0x300000 + i);
+ *dataptr = 0x55555555;
+ dataptr = (void *)(0x300000 + i + 4);
+ *dataptr = 0xaaaaaaaa;
+ }
+ printk(BIOS_DEBUG, "Done!\n");
+ printk(BIOS_DEBUG, "Testing memory...\n");
+ uint32_t readback;
+ for (i=0; i < 0x1000000; i = i + 8) {
+ dataptr = (void *)(0x300000 + i);
+ readback = *dataptr;
+ if (readback != 0x55555555)
+ printk(BIOS_DEBUG, "%p: INCORRECT VALUE %08x (should have been %08x)\n", dataptr, readback, 0x55555555);
+ dataptr = (void *)(0x300000 + i + 4);
+ readback = *dataptr;
+ if (readback != 0xaaaaaaaa)
+ printk(BIOS_DEBUG, "%p: INCORRECT VALUE %08x (should have been %08x)\n", dataptr, readback, 0xaaaaaaaa);
+ }
+ printk(BIOS_DEBUG, "Done!\n");
+}
+#endif
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ struct sys_info *sysinfo = &sysinfo_car;
+
+ u32 bsp_apicid = 0, val;
+ msr_t msr;
+
+ timestamp_init(timestamp_get());
+ timestamp_add_now(TS_START_ROMSTAGE);
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ set_bsp_node_CHtExtNodeCfgEn();
+ enumerate_ht_chain();
+
+ /* SR56x0 pcie bridges block pci_locate_device() before pcie training.
+ * disable all pcie bridges on SR56x0 to work around it
+ */
+ sr5650_disable_pcie_bridge();
+
+ /* Initialize southbridge */
+ sb7xx_51xx_pci_port80();
+
+ /* Initialize early serial */
+ nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ console_init();
+ }
+
+ post_code(0x30);
+
+ if (bist == 0)
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+
+ post_code(0x32);
+
+ enable_sr5650_dev8();
+ sb7xx_51xx_lpc_init();
+
+ if (CONFIG_MAX_PHYSICAL_CPUS != 4)
+ printk(BIOS_WARNING, "CONFIG_MAX_PHYSICAL_CPUS is %d, but this is a dual socket AMD G34 board!\n", CONFIG_MAX_PHYSICAL_CPUS);
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+ printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
+ printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
+
+ /* Setup sysinfo defaults */
+ set_sysinfo_in_ram(0);
+
+ update_microcode(val);
+
+ post_code(0x33);
+
+ cpuSetAMDMSR();
+ post_code(0x34);
+
+ amd_ht_init(sysinfo);
+ amd_ht_fixup(sysinfo);
+ post_code(0x35);
+
+ /* Set DDR memory voltage
+ * FIXME
+ * This should be set based on the output of the DIMM SPDs
+ * For now it is locked to 1.5V
+ */
+ set_ddr3_voltage(0, 0); /* Node 0 */
+ set_ddr3_voltage(1, 0); /* Node 1 */
+
+ /* Setup nodes PCI space and start core 0 AP init. */
+ finalize_node_setup(sysinfo);
+
+ /* Setup any mainboard PCI settings etc. */
+ setup_mb_resource_map();
+ post_code(0x36);
+
+ /* wait for all the APs core0 started by finalize_node_setup. */
+ /* FIXME: A bunch of cores are going to start output to serial at once.
+ * It would be nice to fix up prink spinlocks for ROM XIP mode.
+ * I think it could be done by putting the spinlock flag in the cache
+ * of the BSP located right after sysinfo.
+ */
+ wait_all_core0_started();
+
+ /* run _early_setup before soft-reset. */
+ sr5650_early_setup();
+ sb7xx_51xx_early_setup();
+
+ if (IS_ENABLED(CONFIG_SET_FIDVID)) {
+ msr = rdmsr(0xc0010071);
+ printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+
+ /* FIXME: The sb fid change may survive the warm reset and only need to be done once */
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+ post_code(0x39);
+
+ if (!warm_reset_detect(0)) { // BSP is node 0
+ init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
+ } else {
+ init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
+ }
+
+ post_code(0x3A);
+
+ /* show final fid and vid */
+ msr=rdmsr(0xc0010071);
+ printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+ }
+
+ if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) {
+ /* Core0 on each node is configured. Now setup any additional cores. */
+ printk(BIOS_DEBUG, "start_other_cores()\n");
+ start_other_cores();
+ post_code(0x37);
+ wait_all_other_cores_started(bsp_apicid);
+ }
+
+ post_code(0x38);
+
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
+ sr5650_htinit();
+
+ /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+ if (!warm_reset_detect(0)) {
+ printk(BIOS_INFO, "...WARM RESET...\n\n\n");
+ soft_reset();
+ die("After soft_reset_x - shouldn't see this message!!!\n");
+ }
+
+ /* Set up peripheral control lines */
+ set_peripheral_control_lines();
+
+ post_code(0x3B);
+
+ /* It's the time to set ctrl in sysinfo now; */
+ printk(BIOS_DEBUG, "fill_mem_ctrl() detected %d nodes\n", sysinfo->nodes);
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ post_code(0x3D);
+
+#if 0
+ /* FIXME
+ * After the AMD K10 code has been converted to use
+ * IS_ENABLED(CONFIG_DEBUG_SMBUS) uncomment this block
+ */
+ if (IS_ENABLED(CONFIG_DEBUG_SMBUS)) {
+ dump_spd_registers(&cpu[0]);
+ dump_smbus_registers();
+ }
+#endif
+
+ post_code(0x40);
+
+ timestamp_add_now(TS_BEFORE_INITRAM);
+ printk(BIOS_DEBUG, "raminit_amdmct()\n");
+ raminit_amdmct(sysinfo);
+ timestamp_add_now(TS_AFTER_INITRAM);
+
+#if !IS_ENABLED(CONFIG_LATE_CBMEM_INIT)
+ cbmem_initialize_empty();
+ post_code(0x41);
+
+ amdmct_cbmem_store_info(sysinfo);
+#endif
+
+ printk(BIOS_DEBUG, "disable_spd()\n");
+ switch_spd_mux(0x1);
+
+ sr5650_before_pci_init();
+ sb7xx_51xx_before_pci_init();
+
+ /* Configure SP5100 GPIOs to match vendor settings */
+ pci_write_config16(PCI_DEV(0, 0x14, 0), 0x50, 0x0170);
+ pci_write_config16(PCI_DEV(0, 0x14, 0), 0x54, 0x0707);
+ pci_write_config16(PCI_DEV(0, 0x14, 0), 0x56, 0x0bb0);
+ pci_write_config16(PCI_DEV(0, 0x14, 0), 0x5a, 0x0ff0);
+
+ timestamp_add_now(TS_END_ROMSTAGE);
+
+#ifdef TEST_MEMORY
+ execute_memory_test();
+#endif
+
+ post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
+ post_code(0x43); // Should never see this post code.
+}
+
+/**
+ * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List)
+ * Description:
+ * This routine is called every time a non-coherent chain is processed.
+ * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a
+ * swap list. The first part of the list controls the BUID assignment and the
+ * second part of the list provides the device to device linking. Device orientation
+ * can be detected automatically, or explicitly. See documentation for more details.
+ *
+ * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ * based on each device's unit count.
+ *
+ * Parameters:
+ * @param[in] node = The node on which this chain is located
+ * @param[in] link = The link on the host for this chain
+ * @param[out] List = supply a pointer to a list
+ */
+BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List)
+{
+ return 0;
+} \ No newline at end of file
diff --git a/src/mainboard/asus/kgpe-d16/spd_notes.txt b/src/mainboard/asus/kgpe-d16/spd_notes.txt
new file mode 100644
index 0000000000..623a88f82a
--- /dev/null
+++ b/src/mainboard/asus/kgpe-d16/spd_notes.txt
@@ -0,0 +1,30 @@
+====================================================================================================
+SPD mux
+====================================================================================================
+ SP5100
+ GPIO 60 GPIO 59
+Disabled 0 0
+Normal operation 0 1
+CPU 0 SPD 1 0
+CPU 1 SPD 1 1
+
+====================================================================================================
+W83795
+====================================================================================================
+
+Sensor mappings:
+CPU_FAN1: FAN1
+CPU_FAN2: FAN2
+FRNT_FAN1: FAN3
+FRNT_FAN2: FAN4
+FRNT_FAN3: FAN5
+FRNT_FAN4: FAN6
+FRNT_FAN5: FAN7
+REAR_FAN1: FAN8
+
+====================================================================================================
+Other hardware
+====================================================================================================
+
+RECOVERY1 middle pin is connected to southbridge (AMD SP5100) GPIO 61
+Normal is HIGH, recovery is LOW.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 15:28:26 +0000