diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/acer/aspire_vn7_572g/devicetree.cb | 19 |
1 files changed, 8 insertions, 11 deletions
diff --git a/src/mainboard/acer/aspire_vn7_572g/devicetree.cb b/src/mainboard/acer/aspire_vn7_572g/devicetree.cb index 1521501e70..0328ec7244 100644 --- a/src/mainboard/acer/aspire_vn7_572g/devicetree.cb +++ b/src/mainboard/acer/aspire_vn7_572g/devicetree.cb @@ -88,9 +88,6 @@ chip soc/intel/skylake register "PrimaryDisplay" = "Display_Switchable" end - device ref sa_thermal off end - device ref chap off end - device ref gmm off end device ref south_xhci on register "usb2_ports[0]" = "{ .enable = 1, @@ -212,9 +209,7 @@ chip soc/intel/skylake end end end - device ref south_xdci off end device ref thermal on end - device ref cio off end device ref i2c0 on chip drivers/i2c/hid register "generic.name" = ""TPL0"" @@ -257,30 +252,34 @@ chip soc/intel/skylake device ref uart2 on end # Board has no GPIO expander on I2C4 (despite SetupUtility claim that it does - this would be static text) device ref pcie_rp1 on + # dGPU; x4 register "PcieRpEnable[0]" = "1" register "PcieRpAdvancedErrorReporting[0]" = "1" register "PcieRpLtrEnable[0]" = "1" register "PcieRpClkReqSupport[0]" = "1" register "PcieRpClkReqNumber[0]" = "0" register "PcieRpMaxPayload[0]" = "RpMaxPayload_256" - end # PCI Express Port 1 (dGPU; x4) + end device ref pcie_rp7 on + # NGFF; x2 register "PcieRpEnable[6]" = "1" register "PcieRpAdvancedErrorReporting[6]" = "1" register "PcieRpLtrEnable[6]" = "1" register "PcieRpClkReqSupport[6]" = "1" register "PcieRpClkReqNumber[6]" = "3" register "PcieRpMaxPayload[6]" = "RpMaxPayload_256" - end # PCI Express Port 7 (NGFF; x2) + end device ref pcie_rp9 on + # LAN register "PcieRpEnable[8]" = "1" register "PcieRpAdvancedErrorReporting[8]" = "1" register "PcieRpLtrEnable[8]" = "1" register "PcieRpClkReqSupport[8]" = "1" register "PcieRpClkReqNumber[8]" = "1" register "PcieRpMaxPayload[8]" = "RpMaxPayload_256" - end # PCI Express Port 9 (LAN) + end device ref pcie_rp10 on + # WLAN register "PcieRpEnable[9]" = "1" register "PcieRpAdvancedErrorReporting[9]" = "1" register "PcieRpLtrEnable[9]" = "1" @@ -289,7 +288,7 @@ chip soc/intel/skylake register "PcieRpMaxPayload[9]" = "RpMaxPayload_256" # ASPM L0s is broken/unsupported on Qualcomm Atheros QCA6174 (AER: corrected errors) register "pcie_rp_aspm[9]" = "AspmL1" - end # PCI Express Port 10 (WLAN) + end # Although vendor's platform NVS area shows SCS is enabled, the SD card reader is actually connected over USB device ref lpc_espi on register "lpc_iod" = "0x0010" # 80h-81h; ComB: 2F8h-2FFh (COM 2) @@ -301,7 +300,6 @@ chip soc/intel/skylake # EC/KBC requires continuous mode register "serirq_mode" = "SERIRQ_CONTINUOUS" end - device ref p2sb on end device ref pmc on # Note that GPE events called out in ASL code rely on this # route. i.e. If this route changes then the affected GPE @@ -325,7 +323,6 @@ chip soc/intel/skylake end device ref smbus on end device ref fast_spi on end - device ref tracehub off end end chip drivers/crb device mmio 0xfed40000 on end |