3 files changed, 14 insertions, 8 deletions
diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb
index effb4c2813..20977e0ac2 100644
--- a/src/mainboard/digitallogic/msm586seg/Config.lb
+++ b/src/mainboard/digitallogic/msm586seg/Config.lb
@@ -44,7 +44,7 @@ arch i386 end
 
 driver mainboard.o
 if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
+object reset.o
 
 ##
 ## Romcc output
diff --git a/src/mainboard/digitallogic/msm586seg/auto.c b/src/mainboard/digitallogic/msm586seg/auto.c
index 961f5481ee..b165657c1d 100644
--- a/src/mainboard/digitallogic/msm586seg/auto.c
+++ b/src/mainboard/digitallogic/msm586seg/auto.c
@@ -14,6 +14,9 @@
 #include "cpu/x86/bist.h"
 #include "cpu/amd/sc520/raminit.c"
 
+struct mem_controller {
+	int i;
+};
 
 static void hard_reset(void)
 {
@@ -36,19 +39,21 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
  
 static inline int spd_read_byte(unsigned device, unsigned address)
 {
-	return smbus_read_byte(device, address);
+//	return smbus_read_byte(device, address);
 }
 
-#include "sdram/generic_sdram.c"
+//#include "sdram/generic_sdram.c"
 
 static void main(unsigned long bist)
 {
+/*
 	static const struct mem_controller memctrl[] = {
 		{
 			.d0 = PCI_DEV(0, 0, 0),
 			.channel0 = { (0xa<<3)|0, 0 },
 		},
 	};
+*/
 
 	if (bist == 0) {
 		early_mtrr_init();
@@ -65,7 +70,7 @@ static void main(unsigned long bist)
 #if 0
 	print_pci_devices();
 #endif
-
+#if 0
 	if(!bios_reset_detected()) {
         	enable_smbus();
 #if 0
@@ -73,12 +78,13 @@ static void main(unsigned long bist)
 	//        	dump_smbus_registers();
 #endif
 
-
 		memreset_setup();
 
 		sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
 
+
 	} 
+#endif
 #if 0
 	else {
 		        /* clear memory 1meg */
diff --git a/src/mainboard/digitallogic/msm586seg/reset.c b/src/mainboard/digitallogic/msm586seg/reset.c
index f332b3f6a3..e0e6d2aa89 100644
--- a/src/mainboard/digitallogic/msm586seg/reset.c
+++ b/src/mainboard/digitallogic/msm586seg/reset.c
@@ -32,10 +32,10 @@ static unsigned pci_read_config32(device_t dev, unsigned where)
         outl(0x80000000 | (addr & ~3), 0xCF8);
         return inl(0xCFC);
 }
-
+#endif
 void hard_reset(void)
 {
-	set_bios_reset();
+	//set_bios_reset();
 	//	pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
 }
-#endif
+