summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/superio/ite/Makefile.mk1
-rw-r--r--src/superio/ite/it8659e/Kconfig10
-rw-r--r--src/superio/ite/it8659e/Makefile.mk3
-rw-r--r--src/superio/ite/it8659e/acpi/superio.asl219
-rw-r--r--src/superio/ite/it8659e/chip.h12
-rw-r--r--src/superio/ite/it8659e/it8659e.h34
-rw-r--r--src/superio/ite/it8659e/superio.c66
7 files changed, 345 insertions, 0 deletions
diff --git a/src/superio/ite/Makefile.mk b/src/superio/ite/Makefile.mk
index d44ade4e10..678ea95203 100644
--- a/src/superio/ite/Makefile.mk
+++ b/src/superio/ite/Makefile.mk
@@ -14,6 +14,7 @@ subdirs-y += it8528e
subdirs-y += it8613e
subdirs-y += it8623e
subdirs-y += it8629e
+subdirs-y += it8659e
subdirs-y += it8712f
subdirs-y += it8718f
subdirs-y += it8720f
diff --git a/src/superio/ite/it8659e/Kconfig b/src/superio/ite/it8659e/Kconfig
new file mode 100644
index 0000000000..92ee4c112e
--- /dev/null
+++ b/src/superio/ite/it8659e/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config SUPERIO_ITE_IT8659E
+ bool
+ select SUPERIO_ITE_COMMON_PRE_RAM
+ select SUPERIO_ITE_ENV_CTRL
+ select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2
+ select SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG
+ select SUPERIO_ITE_ENV_CTRL_8BIT_PWM
+ select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN
diff --git a/src/superio/ite/it8659e/Makefile.mk b/src/superio/ite/it8659e/Makefile.mk
new file mode 100644
index 0000000000..1767fbcdf9
--- /dev/null
+++ b/src/superio/ite/it8659e/Makefile.mk
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+ramstage-$(CONFIG_SUPERIO_ITE_IT8659E) += superio.c
diff --git a/src/superio/ite/it8659e/acpi/superio.asl b/src/superio/ite/it8659e/acpi/superio.asl
new file mode 100644
index 0000000000..45c2d131d6
--- /dev/null
+++ b/src/superio/ite/it8659e/acpi/superio.asl
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Include this file into a mainboard's DSDT _SB device tree and it will
+ * expose the IT8659E SuperIO and some of its functionality.
+ *
+ * It allows the change of IO ports, IRQs and DMA settings on logical
+ * devices, disabling and reenabling logical devices.
+ *
+ * LDN State
+ * 0x1 UARTA Implemented, tested
+ * 0x2 UARTB Implemented, tested
+ * 0x4 EC Implemented, tested
+ * 0x5 KBC Implemented, untested
+ * 0x6 MOUSE Implemented, untested
+ * 0x7 GPIO Implemented, tested
+ * 0xa CIR Not implemented
+ *
+ * Controllable through preprocessor defines:
+ * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0)
+ * SUPERIO_PNP_BASE I/O address of the first PnP configuration register
+ * IT8659E_SHOW_UARTA If defined, UARTA will be exposed.
+ * IT8659E_SHOW_UARTB If defined, UARTB will be exposed.
+ * IT8659E_SHOW_KBC If defined, the KBC will be exposed.
+ * IT8659E_SHOW_PS2M If defined, PS/2 mouse support will be exposed.
+ * IT8659E_SHOW_EC If defined, the EC will be exposed.
+ * IT8659E_SHOW_GPIO If defined, the GPIO will be exposed.
+ */
+
+#undef SUPERIO_CHIP_NAME
+#define SUPERIO_CHIP_NAME IT8659E
+#include <superio/acpi/pnp.asl>
+
+#undef PNP_DEFAULT_PSC
+#define PNP_DEFAULT_PSC Return (0) /* no power management */
+
+#define CONFIGURE_CONTROL CCTL
+
+Device (SUPERIO_DEV) {
+ Name (_HID, EisaId("PNP0A05"))
+ Name (_STR, Unicode("ITE IT8659E Super I/O"))
+ Name (_UID, SUPERIO_UID(SUPERIO_DEV,))
+
+ /* Mutex for accesses to the configuration ports */
+ Mutex (CRMX, 1)
+
+ /* SuperIO configuration ports */
+ OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02)
+ Field (CREG, ByteAcc, NoLock, Preserve)
+ {
+ PNP_ADDR_REG, 8,
+ PNP_DATA_REG, 8
+ }
+ IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x02),
+ CONFIGURE_CONTROL, 8, /* Global configure control */
+
+ Offset (0x07),
+ PNP_LOGICAL_DEVICE, 8, /* Logical device selector */
+
+ Offset (0x30),
+ PNP_DEVICE_ACTIVE, 1, /* Logical device activation */
+
+ Offset (0x60),
+ PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */
+ PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */
+ PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */
+ PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */
+
+ Offset (0x70),
+ PNP_IRQ0, 8, /* First IRQ */
+ }
+
+ Method (_CRS)
+ {
+ /* Announce the used i/o ports to the OS */
+ Return (ResourceTemplate () {
+ IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02)
+ })
+ }
+
+ #undef PNP_ENTER_MAGIC_1ST
+ #undef PNP_ENTER_MAGIC_2ND
+ #undef PNP_ENTER_MAGIC_3RD
+ #undef PNP_ENTER_MAGIC_4TH
+ #undef PNP_EXIT_MAGIC_1ST
+ #define PNP_ENTER_MAGIC_1ST 0x87
+ #define PNP_ENTER_MAGIC_2ND 0x01
+ #define PNP_ENTER_MAGIC_3RD 0x55
+#if SUPERIO_PNP_BASE == 0x2e
+ #define PNP_ENTER_MAGIC_4TH 0x55
+#else
+ #define PNP_ENTER_MAGIC_4TH 0xaa
+#endif
+ #define PNP_EXIT_SPECIAL_REG CONFIGURE_CONTROL
+ #define PNP_EXIT_SPECIAL_VAL 0x02
+ #include <superio/acpi/pnp_config.asl>
+
+#ifdef IT8659E_SHOW_UARTA
+ #undef SUPERIO_UART_LDN
+ #undef SUPERIO_UART_DDN
+ #undef SUPERIO_PNP_NO_DIS
+ #undef SUPERIO_UART_PM_REG
+ #undef SUPERIO_UART_PM_VAL
+ #undef SUPERIO_UART_PM_LDN
+ #define SUPERIO_UART_LDN 1
+ #include <superio/acpi/pnp_uart.asl>
+#endif
+
+#ifdef IT8659E_SHOW_UARTB
+ #undef SUPERIO_UART_LDN
+ #undef SUPERIO_UART_DDN
+ #undef SUPERIO_PNP_NO_DIS
+ #undef SUPERIO_UART_PM_REG
+ #undef SUPERIO_UART_PM_VAL
+ #undef SUPERIO_UART_PM_LDN
+ #define SUPERIO_UART_LDN 2
+ #include <superio/acpi/pnp_uart.asl>
+#endif
+
+#ifdef IT8659E_SHOW_KBC
+ #undef SUPERIO_KBC_LDN
+ #undef SUPERIO_KBC_PS2M
+ #undef SUPERIO_KBC_PS2LDN
+ #undef SUPERIO_PNP_NO_DIS
+ #define SUPERIO_KBC_LDN 5
+#ifdef IT8659E_SHOW_PS2M
+ #define SUPERIO_KBC_PS2LDN 6
+#endif
+ #include <superio/acpi/pnp_kbc.asl>
+#endif
+
+
+/*
+ * Generic setup for EC device.
+ *
+ * IT8659E_EC_IO0 The alignment and length of the first PnP i/o
+ * resource (comma separated, e.g. `0x02, 0x08`,
+ * optional)
+ * IT8659E_EC_IO1 The alignment and length of the second PnP i/o
+ * resource (comma separated, e.g. `0x02, 0x08`,
+ * optional)
+ * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled
+ */
+#ifdef IT8659E_SHOW_EC
+ #undef SUPERIO_PNP_HID
+ #undef SUPERIO_PNP_LDN
+ #undef SUPERIO_PNP_DDN
+ #undef SUPERIO_PNP_NO_DIS
+ #undef SUPERIO_PNP_PM_REG
+ #undef SUPERIO_PNP_PM_VAL
+ #undef SUPERIO_PNP_PM_LDN
+ #undef SUPERIO_PNP_IO0
+ #undef SUPERIO_PNP_IO1
+ #undef SUPERIO_PNP_IO2
+ #undef SUPERIO_PNP_IRQ0
+ #undef SUPERIO_PNP_IRQ1
+ #undef SUPERIO_PNP_DMA
+
+ #define SUPERIO_PNP_LDN 4
+ #define SUPERIO_PNP_DDN "ITE IT8659E Environmental Controller"
+
+#ifdef IT8659E_EC_IO0
+ #define SUPERIO_PNP_IO0 0x08, 0x08
+#endif
+
+#ifdef IT8659E_EC_IO1
+ #define SUPERIO_PNP_IO1 0x08, 0x04
+#endif
+
+#ifdef IT8659E_EC_IRQ0
+ #define SUPERIO_PNP_IRQ0
+#endif
+
+ #include <superio/acpi/pnp_generic.asl>
+#endif
+
+/*
+ * Generic setup for GPIO device.
+ *
+ * IT8659E_EC_IO0 The alignment and length of the first PnP i/o
+ * resource (comma separated, e.g. `0x02, 0x08`,
+ * optional)
+ * IT8659E_EC_IO1 The alignment and length of the second PnP i/o
+ * resource (comma separated, e.g. `0x02, 0x08`,
+ * optional)
+ * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled
+ */
+#ifdef IT8659E_SHOW_GPIO
+ #undef SUPERIO_PNP_HID
+ #undef SUPERIO_PNP_LDN
+ #undef SUPERIO_PNP_DDN
+ #undef SUPERIO_PNP_NO_DIS
+ #undef SUPERIO_PNP_PM_REG
+ #undef SUPERIO_PNP_PM_VAL
+ #undef SUPERIO_PNP_PM_LDN
+ #undef SUPERIO_PNP_IO0
+ #undef SUPERIO_PNP_IO1
+ #undef SUPERIO_PNP_IO2
+ #undef SUPERIO_PNP_IRQ0
+ #undef SUPERIO_PNP_IRQ1
+ #undef SUPERIO_PNP_DMA
+
+ #define SUPERIO_PNP_LDN 7
+ #define SUPERIO_PNP_DDN "ITE IT8659E GPIO"
+ #define SUPERIO_PNP_NO_DIS
+
+#ifdef IT8659E_GPIO_IO0
+ #define SUPERIO_PNP_IO0 0x04, 0x04
+#endif
+
+#ifdef IT8659E_GPIO_IO1
+ #define SUPERIO_PNP_IO1 0x01, 0x08
+#endif
+ #include <superio/acpi/pnp_generic.asl>
+#endif
+
+}
diff --git a/src/superio/ite/it8659e/chip.h b/src/superio/ite/it8659e/chip.h
new file mode 100644
index 0000000000..79bad85c5f
--- /dev/null
+++ b/src/superio/ite/it8659e/chip.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef SUPERIO_ITE_IT8659E_CHIP_H
+#define SUPERIO_ITE_IT8659E_CHIP_H
+
+#include <superio/ite/common/env_ctrl_chip.h>
+
+struct superio_ite_it8659e_config {
+ struct ite_ec_config ec;
+};
+
+#endif /* SUPERIO_ITE_IT8659E_CHIP_H */
diff --git a/src/superio/ite/it8659e/it8659e.h b/src/superio/ite/it8659e/it8659e.h
new file mode 100644
index 0000000000..4fa91e9cfb
--- /dev/null
+++ b/src/superio/ite/it8659e/it8659e.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef SUPERIO_ITE_IT8659E_H
+#define SUPERIO_ITE_IT8659E_H
+
+#define IT8659E_SP1 0x01 /* Com1 */
+#define IT8659E_SP2 0x02 /* Com2 */
+#define IT8659E_EC 0x04 /* Environment controller */
+#define IT8659E_KBCK 0x05 /* PS/2 keyboard */
+#define IT8659E_KBCM 0x06 /* PS/2 mouse */
+#define IT8659E_GPIO 0x07 /* GPIO */
+#define IT8659E_CIR 0x0A /* CIR */
+
+/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */
+#define GPIO_REG_POLARITY(x) (0xb0 + (x))
+#define GPIO_POL_NO_INVERT 0
+#define GPIO_POL_INVERT 1
+
+/* GPIO Internal Pull-up: 1: Enable, 0: Disable */
+#define GPIO_REG_PULLUP(x) (0xb8 + (x))
+#define GPIO_PULLUP_DIS 0
+#define GPIO_PULLUP_EN 1
+
+/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */
+#define GPIO_REG_ENABLE(x) (0xc0 + (x))
+#define GPIO_ALT_FN 0
+#define GPIO_SIMPLE_IO 1
+
+/* GPIO Mode: 0: input mode, 1: output mode */
+#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
+#define GPIO_INPUT_MODE 0
+#define GPIO_OUTPUT_MODE 1
+
+#endif /* SUPERIO_ITE_IT8659E_H */
diff --git a/src/superio/ite/it8659e/superio.c b/src/superio/ite/it8659e/superio.c
new file mode 100644
index 0000000000..e7c4cc4e00
--- /dev/null
+++ b/src/superio/ite/it8659e/superio.c
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <device/device.h>
+#include <device/pnp.h>
+#include <pc80/keyboard.h>
+#include <superio/conf_mode.h>
+#include <superio/ite/common/env_ctrl.h>
+
+#include "chip.h"
+#include "it8659e.h"
+
+static void it8659e_init(struct device *dev)
+{
+ const struct superio_ite_it8659e_config *conf = dev->chip_info;
+ const struct resource *res;
+
+ if (!dev->enabled)
+ return;
+
+ switch (dev->path.pnp.device) {
+ case IT8659E_EC:
+ res = probe_resource(dev, PNP_IDX_IO0);
+ if (!conf || !res)
+ break;
+ ite_ec_init(res->base, &conf->ec);
+ break;
+ case IT8659E_KBCK:
+ pc_keyboard_init(NO_AUX_DEVICE);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct device_operations ops = {
+ .read_resources = pnp_read_resources,
+ .set_resources = pnp_set_resources,
+ .enable_resources = pnp_enable_resources,
+ .enable = pnp_alt_enable,
+ .init = it8659e_init,
+ .ops_pnp_mode = &pnp_conf_mode_870155_aa,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ { NULL, IT8659E_SP1, PNP_IO0 | PNP_IRQ0 | PNP_MSC0 | PNP_MSC1 | PNP_MSC2, 0x0ff8, },
+ { NULL, IT8659E_SP2, PNP_IO0 | PNP_IRQ0 | PNP_MSC0 | PNP_MSC1 | PNP_MSC2, 0x0ff8, },
+ { NULL, IT8659E_EC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_MSC0 | PNP_MSC1 | PNP_MSC2 |
+ PNP_MSC3 | PNP_MSC4 | PNP_MSC5 | PNP_MSC6 | PNP_MSCA | PNP_MSCB |
+ PNP_MSCD, 0x0ff0, 0x0ff0, },
+ { NULL, IT8659E_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_MSC0, 0x0fff, 0x0fff, },
+ { NULL, IT8659E_KBCM, PNP_IRQ0 | PNP_MSC0, },
+ { NULL, IT8659E_GPIO, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_MSC0 | PNP_MSC1 | PNP_MSC2 |
+ PNP_MSC3 | PNP_MSC4 | PNP_MSC5 | PNP_MSC6 | PNP_MSC7 |
+ PNP_MSC8 | PNP_MSC9 | PNP_MSCA | PNP_MSCB, 0x0ff8, 0x0ff8, },
+ { NULL, IT8659E_CIR, PNP_IO0 | PNP_IRQ0 | PNP_MSC0, 0x0ff8, },
+};
+
+static void enable_dev(struct device *dev)
+{
+ pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
+}
+
+struct chip_operations superio_ite_it8659e_ops = {
+ .name = "ITE IT8659E Super I/O",
+ .enable_dev = enable_dev,
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 14:19:41 +0000