diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/southbridge/intel/bd82x6x/pch.h | 9 | ||||
| -rw-r--r-- | src/southbridge/intel/bd82x6x/smihandler.c | 111 |
2 files changed, 77 insertions, 43 deletions
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h index 151627d5dd..1840a2b0d2 100644 --- a/src/southbridge/intel/bd82x6x/pch.h +++ b/src/southbridge/intel/bd82x6x/pch.h @@ -84,7 +84,6 @@ void early_usb_init(const struct southbridge_usb_port *portmap); #define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0) #define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0) -#define PCH_XHCI_DEV PCI_DEV(0, 0x14, 0) #define PCH_ME_DEV PCI_DEV(0, 0x16, 0) #define PCH_PCIE_DEV_SLOT 28 #define PCH_IOAPIC_PCI_BUS 250 @@ -92,6 +91,14 @@ void early_usb_init(const struct southbridge_usb_port *portmap); #define PCH_HPET_PCI_BUS 250 #define PCH_HPET_PCI_SLOT 15 +/* PCI Configuration Space (D20:F0): xHCI */ +#define PCH_XHCI_DEV PCI_DEV(0, 0x14, 0) + +#define XHCI_PWR_CNTL_STS 0x74 + +/* xHCI memory base registers */ +#define XHCI_PORTSC_x_USB3(port) (0x4c0 + (port) * 0x10) + /* PCI Configuration Space (D31:F0): LPC */ #define PCH_LPC_DEV PCI_DEV(0, 0x1f, 0) #define SERIRQ_CNTL 0x64 diff --git a/src/southbridge/intel/bd82x6x/smihandler.c b/src/southbridge/intel/bd82x6x/smihandler.c index f0929f494c..3b37b06f83 100644 --- a/src/southbridge/intel/bd82x6x/smihandler.c +++ b/src/southbridge/intel/bd82x6x/smihandler.c @@ -86,46 +86,6 @@ void southbridge_gate_memory_reset(void) gpiobase + GP_LVL); } -static void xhci_sleep(u8 slp_typ) -{ - u32 xhci_bar; - u16 reg16; - - switch (slp_typ) { - case ACPI_S3: - case ACPI_S4: - /* FIXME: Unbalanced width in read/write ops (16-bit read then 32-bit write) */ - reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74); - reg16 &= ~0x03UL; - pci_write_config32(PCH_XHCI_DEV, 0x74, reg16); - - pci_or_config16(PCH_XHCI_DEV, PCI_COMMAND, - PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - - xhci_bar = pci_read_config32(PCH_XHCI_DEV, PCI_BASE_ADDRESS_0) & ~0xFUL; - - /* FIXME: This looks broken (conditions are always false) */ - if ((xhci_bar + 0x4C0) & 1) - pch_iobp_update(0xEC000082, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4D0) & 1) - pch_iobp_update(0xEC000182, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4E0) & 1) - pch_iobp_update(0xEC000282, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4F0) & 1) - pch_iobp_update(0xEC000382, ~0UL, (3 << 2)); - - pci_and_config16(PCH_XHCI_DEV, PCI_COMMAND, - ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)); - - pci_or_config16(PCH_XHCI_DEV, 0x74, 0x03); - break; - - case ACPI_S5: - pci_or_config16(PCH_XHCI_DEV, 0x74, (1 << 8) | 0x03); - break; - } -} - void southbridge_smi_monitor(void) { #define IOTRAP(x) (trap_sts & (1 << x)) @@ -179,10 +139,77 @@ void southbridge_smi_monitor(void) #undef IOTRAP } +/* + * PCH BIOS Spec Rev 0.7.0, Section 13.5 + * Additional xHCI Controller Configurations Prior to Entering S3/S4 + */ +static void xhci_a0_suspend_smm_workaround(void) +{ + /* Workaround only applies to Panther Point stepping A0 */ + if (pch_silicon_revision() != PCH_STEP_A0) + return; + + /* The BAR is 64-bit, account for it being above 4 GiB */ + if (pci_read_config32(PCH_XHCI_DEV, PCI_BASE_ADDRESS_0 + 4)) + return; + + /* PCH datasheet indicates that only the upper 16 bits are valid */ + uintptr_t xhci_bar = pci_read_config32(PCH_XHCI_DEV, PCI_BASE_ADDRESS_0) & + ~PCI_BASE_ADDRESS_MEM_ATTR_MASK; + + if (smm_points_to_smram((void *)xhci_bar, 64 * KiB)) + return; + + /* Step 1: Set power state to D0 */ + pci_and_config16(PCH_XHCI_DEV, XHCI_PWR_CNTL_STS, ~(3 << 0)); + + /* Step 2 */ + pci_or_config16(PCH_XHCI_DEV, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + /* Steps 3 to 6: If USB3 PORTSC current connect status (bit 0) is set, do IOBP magic */ + for (unsigned int port = 0; port < 4; port++) { + if (read32((void *)(xhci_bar + XHCI_PORTSC_x_USB3(port))) & (1 << 0)) + pch_iobp_update(0xec000082 + 0x100 * port, ~0, 3 << 2); + } + + /* Step 7 */ + pci_and_config16(PCH_XHCI_DEV, PCI_COMMAND, ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)); + + /* Step 8: Set power state to D3 */ + pci_or_config16(PCH_XHCI_DEV, XHCI_PWR_CNTL_STS, 3 << 0); +} + void southbridge_smm_xhci_sleep(u8 slp_type) { - if (gnvs->xhci) - xhci_sleep(slp_type); + /* Only Panther Point has xHCI */ + if (pch_silicon_type() != PCH_TYPE_PPT) + return; + + /* Verify that RCBA is still valid */ + if (pci_read_config32(PCH_LPC_DEV, RCBA) != ((u32)DEFAULT_RCBA | RCBA_ENABLE)) + return; + + if (RCBA32(FD) & PCH_DISABLE_XHCI) + return; + + switch (slp_type) { + case ACPI_S3: + case ACPI_S4: + xhci_a0_suspend_smm_workaround(); + break; + + case ACPI_S5: + /* + * PCH BIOS Spec Rev 0.7.0, Section 13.5 + * Additional xHCI Controller Configurations Prior to Entering S5 + * + * For all steppings: + * Step 1: Set power state to D3 (bits 1:0) + * Step 2: Set PME# enable bit (bit 8) + */ + pci_or_config16(PCH_XHCI_DEV, XHCI_PWR_CNTL_STS, 1 << 8 | 3 << 0); + break; + } } void southbridge_finalize_all(void) |