diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/hatch/variants/puff/overridetree.cb | 95 |
1 files changed, 92 insertions, 3 deletions
diff --git a/src/mainboard/google/hatch/variants/puff/overridetree.cb b/src/mainboard/google/hatch/variants/puff/overridetree.cb index e3ccc616b2..402b98bc9a 100644 --- a/src/mainboard/google/hatch/variants/puff/overridetree.cb +++ b/src/mainboard/google/hatch/variants/puff/overridetree.cb @@ -15,10 +15,59 @@ chip soc/intel/cannonlake [PchSerialIoIndexUART2] = PchSerialIoDisabled, }" - # USB configuration - register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)" + # USB configuration + register "usb2_ports[0]" = "USB2_PORT_MID(OC2)" # Type-A Port 2 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 register "usb2_ports[6]" = "USB2_PORT_EMPTY" - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 # Enable eMMC HS400 register "ScsEmmcHs400Enabled" = "1" @@ -127,6 +176,26 @@ chip soc/intel/cannonlake chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi + register "desc" = ""Type-A Port 2"" + register "type" = "UPC_TYPE_A" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-A Port 3"" + register "type" = "UPC_TYPE_A" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-A Port 1"" + register "type" = "UPC_TYPE_A" + device usb 2.3 on end + end + chip drivers/usb/acpi register "desc" = ""Type-A Port 4"" register "type" = "UPC_TYPE_A" device usb 2.4 on end @@ -140,6 +209,26 @@ chip soc/intel/cannonlake device usb 2.6 off end end chip drivers/usb/acpi + register "desc" = ""Type-A Port 2"" + register "type" = "UPC_TYPE_USB3_A" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-A Port 3"" + register "type" = "UPC_TYPE_USB3_A" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-A Port 1"" + register "type" = "UPC_TYPE_USB3_A" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 3.3 on end + end + chip drivers/usb/acpi register "desc" = ""Type-A Port 0"" register "type" = "UPC_TYPE_USB3_A" device usb 3.4 on end |