diff options
Diffstat (limited to 'src')
25 files changed, 0 insertions, 2783 deletions
diff --git a/src/mainboard/tyan/s2735/auto.c b/src/mainboard/tyan/s2735/auto.c deleted file mode 100644 index 456c342b62..0000000000 --- a/src/mainboard/tyan/s2735/auto.c +++ /dev/null @@ -1,145 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" - -#include "arch/i386/lib/console.c" - -#include "ram/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" -#include "northbridge/intel/e7501/raminit.h" -#if 0 -#include "cpu/intel/model_f2x/apic_timer.c" -#include "lib/delay.c" -#endif -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/intel/e7501/debug.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void hard_reset(void) -{ - outb(0x0e, 0x0cf9); -} - -static void memreset_setup(void) -{ -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - - - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - - -#include "northbridge/intel/e7501/raminit.c" -#include "northbridge/intel/e7501/reset_test.c" -#include "sdram/generic_sdram.c" - -static void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .d0f1 = PCI_DEV(0, 0, 1), - .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 }, - .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, - }, - }; - - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - early_mtrr_init(); - enable_lapic(); -// init_timer(); - - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); - -// setup_default_resource_map(); -#if 0 - print_pci_devices(); -#endif - if(!bios_reset_detected()) { - enable_smbus(); -#if 0 - dump_spd_registers(&memctrl[0]); -// dump_smbus_registers(); -#endif - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(memctrl), memctrl); - } -#if 0 - else { - /* clear memory 1meg */ - __asm__ volatile( - "1: \n\t" - "movl %0, %%fs:(%1)\n\t" - "addl $4,%1\n\t" - "subl $4,%2\n\t" - "jnz 1b\n\t" - : - : "a" (0), "D" (0), "c" (1024*1024) - ); - - } -#endif - -#if 0 - dump_pci_devices(); -#endif -#if 1 - dump_pci_device(PCI_DEV(0, 0, 0)); -#endif - -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif - -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#endif - -#if 0 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x01000000); - // Check 16MB of memory @ 2GB -// ram_check(0x80000000, 0x81000000); -#endif - -} diff --git a/src/mainboard/tyan/s2735/failover.c b/src/mainboard/tyan/s2735/failover.c deleted file mode 100644 index 91cd69317c..0000000000 --- a/src/mainboard/tyan/s2735/failover.c +++ /dev/null @@ -1,47 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/intel/i82801er/cmos_failover.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/intel/e7501/reset_test.c" - -static unsigned long main(unsigned long bist) -{ - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else { - - check_cmos_failed(); - - if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); -#if 0 - cpu_reset: - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); -#endif - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c deleted file mode 100644 index bec1afabbd..0000000000 --- a/src/mainboard/tyan/s2850/auto.c +++ /dev/null @@ -1,203 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -#define REV_B_RESET 0 -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (0 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } else { - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (0 << 0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - -static void main(unsigned long bist) -{ - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = {(0xa << 3) | 0, (0xa << 3) | 2, 0, 0}, - .channel1 = {(0xa << 3) | 1, (0xa << 3) | 3, 0, 0}, - }, - }; - - int needs_reset; - -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); - } - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2850/failover.c b/src/mainboard/tyan/s2850/failover.c deleted file mode 100644 index fee04156a4..0000000000 --- a/src/mainboard/tyan/s2850/failover.c +++ /dev/null @@ -1,89 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - - -static unsigned long main(unsigned long bist) -{ -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Make cerain my local apic is useable */ - enable_lapic(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(id.nodeid)) { -#else - nodeid = lapicid(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(nodeid)) { -#endif - - if (last_boot_normal()) { - goto normal_image; - } else { - goto cpu_reset; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - cpu_reset: -#if 0 - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); -#endif - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index 1ea34f2644..dd7ee53b96 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -45,8 +45,6 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -if USE_DCACHE_RAM - if CONFIG_USE_INIT makerule ./auto.o @@ -64,31 +62,6 @@ makerule ./auto.inc end end -else - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -end ## ## Build our 16 bit and 32 bit coreboot entry code ## @@ -99,7 +72,6 @@ end mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end @@ -107,7 +79,6 @@ if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds end -end ## ## Build our reset vector (This is where coreboot is entered) @@ -120,24 +91,16 @@ else ldscript /cpu/x86/32bit/reset32.lds end -if USE_DCACHE_RAM -else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc -end - ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_DCACHE_RAM ## ## Setup Cache-As-Ram ## mainboardinit cpu/amd/car/cache_as_ram.inc -end ### ### This is the early phase of coreboot startup @@ -145,12 +108,7 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end end ### @@ -160,28 +118,12 @@ end ## ## Setup RAM ## -if USE_DCACHE_RAM - if CONFIG_USE_INIT initobject auto.o else mainboardinit ./auto.inc end -else - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c deleted file mode 100644 index e988a005e7..0000000000 --- a/src/mainboard/tyan/s2875/auto.c +++ /dev/null @@ -1,173 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); - - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2875/failover.c b/src/mainboard/tyan/s2875/failover.c deleted file mode 100644 index ebc5a5da9e..0000000000 --- a/src/mainboard/tyan/s2875/failover.c +++ /dev/null @@ -1,69 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 7e8007d6cf..a18904bcfa 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -45,8 +45,6 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -if USE_DCACHE_RAM - if CONFIG_USE_INIT makerule ./auto.o @@ -64,31 +62,6 @@ makerule ./auto.inc end end -else - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -end ## ## Build our 16 bit and 32 bit coreboot entry code ## @@ -99,7 +72,6 @@ end mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end @@ -107,7 +79,6 @@ if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds end -end ## ## Build our reset vector (This is where coreboot is entered) @@ -120,24 +91,16 @@ else ldscript /cpu/x86/32bit/reset32.lds end -if USE_DCACHE_RAM -else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc -end - ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_DCACHE_RAM ## ## Setup Cache-As-Ram ## mainboardinit cpu/amd/car/cache_as_ram.inc -end ### ### This is the early phase of coreboot startup @@ -145,12 +108,7 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end end ### @@ -160,28 +118,12 @@ end ## ## Setup RAM ## -if USE_DCACHE_RAM - if CONFIG_USE_INIT initobject auto.o else mainboardinit ./auto.inc end -else - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c deleted file mode 100644 index 623a345c02..0000000000 --- a/src/mainboard/tyan/s2880/auto.c +++ /dev/null @@ -1,173 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -#include "northbridge/amd/amdk8/resourcemap.c" - -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, 0, 0, 0 }, - .channel1 = { (0xa<<3)|5, 0, 0, 0 }, - }, -#endif - }; - int needs_reset; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); - - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - -} diff --git a/src/mainboard/tyan/s2880/failover.c b/src/mainboard/tyan/s2880/failover.c deleted file mode 100644 index 6b7eda80be..0000000000 --- a/src/mainboard/tyan/s2880/failover.c +++ /dev/null @@ -1,68 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 283d8c6bb4..a02d408bb9 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -44,7 +44,6 @@ driver mainboard.o object get_bus_conf.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -if USE_DCACHE_RAM if CONFIG_USE_INIT @@ -63,32 +62,6 @@ makerule ./auto.inc end end -else - - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -end ## ## Build our 16 bit and 32 bit coreboot entry code ## @@ -99,7 +72,6 @@ end mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end @@ -107,7 +79,6 @@ if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds end -end ## ## Build our reset vector (This is where coreboot is entered) @@ -120,24 +91,16 @@ else ldscript /cpu/x86/32bit/reset32.lds end -if USE_DCACHE_RAM -else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc -end - ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_DCACHE_RAM ## ## Setup Cache-As-Ram ## mainboardinit cpu/amd/car/cache_as_ram.inc -end ### ### This is the early phase of coreboot startup @@ -145,12 +108,7 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end end ### @@ -160,28 +118,12 @@ end ## ## Setup RAM ## -if USE_DCACHE_RAM - if CONFIG_USE_INIT initobject auto.o else mainboardinit ./auto.inc end -else - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c deleted file mode 100644 index ea339fe5bd..0000000000 --- a/src/mainboard/tyan/s2881/auto.c +++ /dev/null @@ -1,178 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -//#include "northbridge/amd/amdk8/setup_resource_map.c" -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - - /* tyan does not want the default */ -#include "resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); - - setup_s2881_resource_map(); - needs_reset = setup_coherent_ht_domain(); - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2881/failover.c b/src/mainboard/tyan/s2881/failover.c deleted file mode 100644 index ebc5a5da9e..0000000000 --- a/src/mainboard/tyan/s2881/failover.c +++ /dev/null @@ -1,69 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 2e98c644ec..511d29df55 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -45,8 +45,6 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -if USE_DCACHE_RAM - if CONFIG_USE_INIT makerule ./auto.o @@ -64,31 +62,6 @@ makerule ./auto.inc end end -else - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -end ## ## Build our 16 bit and 32 bit coreboot entry code ## @@ -99,7 +72,6 @@ end mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end @@ -107,7 +79,6 @@ if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds end -end ## ## Build our reset vector (This is where coreboot is entered) @@ -120,24 +91,16 @@ else ldscript /cpu/x86/32bit/reset32.lds end -if USE_DCACHE_RAM -else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc -end - ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_DCACHE_RAM ## ## Setup Cache-As-Ram ## mainboardinit cpu/amd/car/cache_as_ram.inc -end ### ### This is the early phase of coreboot startup @@ -145,12 +108,7 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end end ### @@ -160,28 +118,12 @@ end ## ## Setup RAM ## -if USE_DCACHE_RAM - if CONFIG_USE_INIT initobject auto.o else mainboardinit ./auto.inc end -else - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c deleted file mode 100644 index 53b25a2c24..0000000000 --- a/src/mainboard/tyan/s2882/auto.c +++ /dev/null @@ -1,182 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -#define REV_B_RESET 0 -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/resourcemap.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chains_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2882/failover.c b/src/mainboard/tyan/s2882/failover.c deleted file mode 100644 index 6b7eda80be..0000000000 --- a/src/mainboard/tyan/s2882/failover.c +++ /dev/null @@ -1,68 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index a763e019e7..5ecbd4598b 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -45,8 +45,6 @@ object get_bus_conf.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -if USE_DCACHE_RAM - if CONFIG_USE_INIT makerule ./auto.o @@ -64,31 +62,6 @@ makerule ./auto.inc end end -else - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -end ## ## Build our 16 bit and 32 bit coreboot entry code ## @@ -99,7 +72,6 @@ end mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end @@ -107,7 +79,6 @@ if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/amd/car/cache_as_ram.lds end -end ## ## Build our reset vector (This is where coreboot is entered) @@ -120,24 +91,16 @@ else ldscript /cpu/x86/32bit/reset32.lds end -if USE_DCACHE_RAM -else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc -end - ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_DCACHE_RAM ## ## Setup Cache-As-Ram ## mainboardinit cpu/amd/car/cache_as_ram.inc -end ### ### This is the early phase of coreboot startup @@ -145,12 +108,7 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end end ### @@ -160,28 +118,12 @@ end ## ## Setup RAM ## -if USE_DCACHE_RAM - if CONFIG_USE_INIT initobject auto.o else mainboardinit ./auto.inc end -else - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c deleted file mode 100644 index c926487d5a..0000000000 --- a/src/mainboard/tyan/s2885/auto.c +++ /dev/null @@ -1,186 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -//#include "northbridge/amd/amdk8/setup_resource_map.c" -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" - -#if 0 - #define ENABLE_APIC_EXT_ID 1 - #define APIC_ID_OFFSET 0x10 - #define LIFT_BSP_APIC_ID 0 -#else - #define ENABLE_APIC_EXT_ID 0 -#endif -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -/* tyan does not want the default */ -#include "resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_s2885_resource_map(); - needs_reset = setup_coherent_ht_domain(); - - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - - - -} diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c deleted file mode 100644 index abd2042cd8..0000000000 --- a/src/mainboard/tyan/s2885/failover.c +++ /dev/null @@ -1,67 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - -static unsigned long main(unsigned long bist) -{ - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - /* Is this a cpu only reset? */ - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c deleted file mode 100644 index aab040f6d2..0000000000 --- a/src/mainboard/tyan/s2891/auto.c +++ /dev/null @@ -1,151 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" - -#define K8_HT_FREQ_1G_SUPPORT 0 -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/nvidia/ck804/ck804_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* full reset */ - outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); -#if 1 - /* link reset */ - outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); -#endif -} - -static void memreset_setup(void) -{ -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -/* tyan does not want the default */ -#include "resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) - -#define CK804_NUM 1 -#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" -#include "southbridge/nvidia/ck804/ck804_early_setup.c" - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_s2891_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - needs_reset |= ht_setup_chains_x(); - - needs_reset |= ck804_early_setup_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2891/failover.c b/src/mainboard/tyan/s2891/failover.c deleted file mode 100644 index 1d85c0129b..0000000000 --- a/src/mainboard/tyan/s2891/failover.c +++ /dev/null @@ -1,96 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" - -#include "southbridge/nvidia/ck804/ck804_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -static void sio_setup(void) -{ - - unsigned value; - uint32_t dword; - uint8_t byte; - - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0) | (1<<1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - -#if 1 - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); - -#endif - -} - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected(nodeid)) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c deleted file mode 100644 index bce2bbda4d..0000000000 --- a/src/mainboard/tyan/s2892/auto.c +++ /dev/null @@ -1,153 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" - -#define K8_HT_FREQ_1G_SUPPORT 1 -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/nvidia/ck804/ck804_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* full reset */ - outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); -#if 1 - /* link reset */ - outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); -#endif -} - -static void memreset_setup(void) -{ -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -/* tyan does not want the default */ -#include "resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) - -#define CK804_NUM 1 -#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" -//set GPIO to input mode -#define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ - -#include "southbridge/nvidia/ck804/ck804_early_setup.c" - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); - - setup_s2892_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - needs_reset |= ht_setup_chains_x(); - - needs_reset |= ck804_early_setup_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2892/failover.c b/src/mainboard/tyan/s2892/failover.c deleted file mode 100644 index 2d90e37cdd..0000000000 --- a/src/mainboard/tyan/s2892/failover.c +++ /dev/null @@ -1,90 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" - -#include "southbridge/nvidia/ck804/ck804_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -static void sio_setup(void) -{ - - unsigned value; - uint32_t dword; - uint8_t byte; - - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - - -} - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#endif - -static unsigned long main(unsigned long bist) -{ - /* Make cerain my local apic is useable */ - enable_lapic(); - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c deleted file mode 100644 index 6663f23f3b..0000000000 --- a/src/mainboard/tyan/s2895/auto.c +++ /dev/null @@ -1,178 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" - -//#define K8_HT_FREQ_1G_SUPPORT 1 -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/nvidia/ck804/ck804_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "cpu/amd/model_fxx/model_fxx_msr.h" -#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" - -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" - -#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* full reset */ - outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); -#if 1 - /* link reset */ - outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); -#endif -} - -static void memreset_setup(void) -{ -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) - -#define SUPERIO_GPIO_IO_BASE 0x400 - -static void sio_gpio_setup(void){ - - unsigned value; - -// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -/* tyan does not want the default */ -#include "resourcemap.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) - -#define CK804_NUM 2 -#define CK804B_BUSN 0x80 -#define CK804_USE_NIC 1 -#define CK804_USE_ACI 1 -#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" -//set GPIO to input mode -#define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ - -#include "southbridge/nvidia/ck804/ck804_early_setup.c" - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - sio_gpio_setup(); - - setup_s2895_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - needs_reset |= ht_setup_chains_x(); - - needs_reset |= ck804_early_setup_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - -} diff --git a/src/mainboard/tyan/s2895/failover.c b/src/mainboard/tyan/s2895/failover.c deleted file mode 100644 index 87f4685ae8..0000000000 --- a/src/mainboard/tyan/s2895/failover.c +++ /dev/null @@ -1,108 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> - -#include <device/pnp_def.h> - -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" - -#include "southbridge/nvidia/ck804/ck804_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" -#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" - -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) - -#define SUPERIO_GPIO_IO_BASE 0x400 - -static void sio_setup(void) -{ - - unsigned value; - uint32_t dword; - uint8_t byte; - - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<29)|(1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - -#if 1 - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); -#endif - -} - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - -static unsigned long main(unsigned long bist) -{ - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} |