diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h | 710 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h | 289 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h | 109 |
4 files changed, 0 insertions, 1156 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h deleted file mode 100644 index 1aa46a00a1..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPUPD_H__ -#define __FSPUPD_H__ - -#include <FspEas.h> - -#pragma pack(1) - -#define FSPT_UPD_SIGNATURE 0x545F445055564E44 /* 'DNVUPD_T' */ - -#define FSPM_UPD_SIGNATURE 0x4D5F445055564E44 /* 'DNVUPD_M' */ - -#define FSPS_UPD_SIGNATURE 0x535F445055564E44 /* 'DNVUPD_S' */ - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h deleted file mode 100644 index 3aa74a0f3a..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h +++ /dev/null @@ -1,710 +0,0 @@ -/** @file - -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - -#define MAX_CH 2 /* Maximum Number of Memory Channels */ -#define MAX_DIMM 2 /* Maximum Number of DIMMs PER Memory Channel */ -#define MAX_SPD_BYTES 512 /* Maximum Number of SPD bytes */ - -/* - * Memory Down structures. - */ -typedef enum { - STATE_MEMORY_SLOT = 0, /* No memory down and a physical memory slot. */ - STATE_MEMORY_DOWN = 1, /* Memory down and not a physical memory slot. */ -} MemorySlotState; - -typedef struct { - MemorySlotState SlotState[MAX_CH][MAX_DIMM]; /* Memory Down state of - each DIMM in each - Channel */ - UINT16 SpdDataLen; /* Length in Bytes of a single DIMM's SPD Data */ - UINT8 *SpdDataPtr[MAX_CH][MAX_DIMM]; /* Pointer to SPD Data for each - DIMM in each Channel */ -} MEMORY_DOWN_CONFIG; - -/* -* SMBIOS Memory Info structures. -*/ -typedef struct { - UINT8 DimmId; - UINT32 SizeInMb; - UINT16 MfgId; - UINT8 - ModulePartNum[20]; /* Module part number for DDR3 is 18 bytes - however for DRR4 20 bytes as per JEDEC Spec, - so reserving 20 bytes */ -} DIMM_INFO; - -typedef struct { - UINT8 ChannelId; - UINT8 DimmCount; - DIMM_INFO DimmInfo[MAX_DIMM]; -} CHANNEL_INFO; - -typedef struct { - UINT8 Revision; - UINT16 DataWidth; - /** As defined in SMBIOS 3.0 spec - Section 7.18.2 and Table 75 - **/ - UINT8 MemoryType; - UINT16 MemoryFrequencyInMHz; - /** As defined in SMBIOS 3.0 spec - Section 7.17.3 and Table 72 - **/ - UINT8 ErrorCorrectionType; - UINT8 ChannelCount; - CHANNEL_INFO ChannelInfo[MAX_CH]; -} FSP_SMBIOS_MEMORY_INFO; - -/* -* GBE PCD supported states. -*/ -typedef enum { - BL_GBE0_GBE1_DISABLED, - BL_GBE0_GBE1_ENABLED, - BL_GBE1_DISABLED, -} BL_GBE_PCD_STATE; - -/* -* FIA MUX configuration structures. -*/ - -#define BL_ME_FIA_MUX_LANE_NUM_MAX 20 -#define BL_ME_FIA_MUX_LANE_NUM_MIN 1 -#define BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH 2 -#define BL_ME_FIA_MUX_LANE_MUX_SEL_MASK 0x3 -#define BL_ME_FIA_MUX_LANE_XHCI_ONLY 0xFF00000000 - -typedef enum { - BL_FIA_LANE00 = 0, - BL_FIA_LANE01, - BL_FIA_LANE02, - BL_FIA_LANE03, - BL_FIA_LANE04, - BL_FIA_LANE05, - BL_FIA_LANE06, - BL_FIA_LANE07, - BL_FIA_LANE08, - BL_FIA_LANE09, - BL_FIA_LANE10, - BL_FIA_LANE11, - BL_FIA_LANE12, - BL_FIA_LANE13, - BL_FIA_LANE14, - BL_FIA_LANE15, - BL_FIA_LANE16, - BL_FIA_LANE17, - BL_FIA_LANE18, - BL_FIA_LANE19, -} BL_ME_FIA_MUX_LANE_ORDER; - -#define BL_ME_FIA_MUX_LANE_SATA0_BEGING BL_FIA_LANE04 -#define BL_ME_FIA_MUX_LANE_SATA1_BEGING BL_FIA_LANE12 - -#define BL_FIA_LANE_CONFIG(Config, Lane) \ - ((UINT64)((UINT64)(Config) \ - << ((UINT64)(Lane) * (BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH)))) - -typedef union _BL_ME_FIA_MUX_CONFIG { - UINT64 MeFiaMuxLaneConfig; - struct { - UINT64 Lane00MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE - UINT64 Lane01MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE - UINT64 Lane02MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE - UINT64 Lane03MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE - UINT64 Lane04MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane05MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane06MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane07MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane08MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane09MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane10MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane11MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane12MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane13MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane14MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane15MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or - // SATA - UINT64 Lane16MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or - // SATA - UINT64 Lane17MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or - // SATA - UINT64 Lane18MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or - // SATA - UINT64 Lane19MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or - // SATA - UINT64 Reserved : 24; - } BL_MeFiaMuxLaneMuxSel; -} BL_ME_FIA_MUX_CONFIG; - -typedef enum { - BL_ME_FIA_MUX_LANE_DISCONNECTED, - BL_ME_FIA_MUX_LANE_PCIE, - BL_ME_FIA_MUX_LANE_SATA, - BL_ME_FIA_MUX_LANE_XHCI, -} BL_ME_FIA_MUX_LANE_CONFIG; - -#define BL_ME_FIA_SATA_LANE_SEL_WIDTH 2 -#define BL_ME_FIA_SATA_LANE_XHCI_ONLY 0x55000000 - -typedef enum { - BL_FIA_SATA_LANE04 = 0, - BL_FIA_SATA_LANE05, - BL_FIA_SATA_LANE06, - BL_FIA_SATA_LANE07, - BL_FIA_SATA_LANE08, - BL_FIA_SATA_LANE09, - BL_FIA_SATA_LANE10, - BL_FIA_SATA_LANE11, - BL_FIA_SATA_LANE12, - BL_FIA_SATA_LANE13, - BL_FIA_SATA_LANE14, - BL_FIA_SATA_LANE15, - BL_FIA_SATA_LANE16, - BL_FIA_SATA_LANE17, - BL_FIA_SATA_LANE18, - BL_FIA_SATA_LANE19 -} BL_ME_FIA_SATA_LANE_ORDER; - -#define BL_FIA_SATA_LANE_CONFIG(Config, Lane) \ - ((UINT32)((UINT32)(Config) \ - << ((UINT32)(Lane) * (BL_ME_FIA_SATA_LANE_SEL_WIDTH)))) - -typedef union _BL_ME_FIA_SATA_CONFIG { - UINT64 MeFiaSataLaneConfig; - struct { - UINT64 Lane04SataSel : 2; - UINT64 Lane05SataSel : 2; - UINT64 Lane06SataSel : 2; - UINT64 Lane07SataSel : 2; - UINT64 Lane08SataSel : 2; - UINT64 Lane09SataSel : 2; - UINT64 Lane10SataSel : 2; - UINT64 Lane11SataSel : 2; - UINT64 Lane12SataSel : 2; - UINT64 Lane13SataSel : 2; - UINT64 Lane14SataSel : 2; - UINT64 Lane15SataSel : 2; - UINT64 Lane16SataSel : 2; - UINT64 Lane17SataSel : 2; - UINT64 Lane18SataSel : 2; - UINT64 Lane19SataSel : 2; - UINT64 Reserved : 32; - } BL_MeFiaSataLaneSataSel; -} BL_ME_FIA_SATA_CONFIG; - -typedef enum { - BL_ME_FIA_SATA_CONTROLLER_LANE_ASSIGNED = 0, - BL_ME_FIA_SATA_CONTROLLER_LANE_NOT_ASSIGNED = 1, - BL_ME_FIA_SATA_CONTROLLER_LANE_SS_AND_GPIO_ASSIGNED = 3 -} BL_ME_FIA_SATA_LANE_CONFIG; - -#define BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH 4 -#define BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH 8 -#define BL_ME_FIA_PCIE_ROOT_CONFIG_XHCI_ONLY 0x0 - -typedef enum { - BL_FIA_PCIE_ROOT_PORT_0 = 0, - BL_FIA_PCIE_ROOT_PORT_1, - BL_FIA_PCIE_ROOT_PORT_2, - BL_FIA_PCIE_ROOT_PORT_3, - BL_FIA_PCIE_ROOT_PORT_4, - BL_FIA_PCIE_ROOT_PORT_5, - BL_FIA_PCIE_ROOT_PORT_6, - BL_FIA_PCIE_ROOT_PORT_7 -} BL_ME_FIA_PCIE_ROOT_PORT_ORDER; - -#define BL_FIA_PCIE_ROOT_PORT_CONFIG(Type, Config, PcieRootPort) \ - (((Type) == BL_ME_FIA_PCIE_ROOT_PORT_STATE) \ - ? ((UINT64)((UINT64)(Config) << (UINT64)(PcieRootPort))) \ - : ((UINT64)( \ - (UINT64)(Config) << (UINT64)( \ - ((UINT64)(PcieRootPort) * \ - (BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH)) + \ - BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH)))) - -typedef union _BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG { - UINT64 MeFiaPcieRootPortsConfig; - struct { - UINT64 PcieRp0En : 1; - UINT64 PcieRp1En : 1; - UINT64 PcieRp2En : 1; - UINT64 PcieRp3En : 1; - UINT64 PcieRp4En : 1; - UINT64 PcieRp5En : 1; - UINT64 PcieRp6En : 1; - UINT64 PcieRp7En : 1; - UINT64 PcieRp0LinkWidth : 4; - UINT64 PcieRp1LinkWidth : 4; - UINT64 PcieRp2LinkWidth : 4; - UINT64 PcieRp3LinkWidth : 4; - UINT64 PcieRp4LinkWidth : 4; - UINT64 PcieRp5LinkWidth : 4; - UINT64 PcieRp6LinkWidth : 4; - UINT64 PcieRp7LinkWidth : 4; - UINT64 Reserved : 24; - } BL_MeFiaPcieRpConfig; -} BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG; - -typedef enum { - BL_ME_FIA_PCIE_ROOT_PORT_STATE, - BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH -} BL_ME_FIA_PCIE_ROOT_PORT_CONFIG_TYPE; - -typedef enum { - BL_ME_FIA_PCIE_ROOT_PORT_DISABLED, - BL_ME_FIA_PCIE_ROOT_PORT_ENABLED -} BL_ME_FIA_PCIE_ROOT_PORT_STATE_CONFIG; - -typedef enum { - BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_BICTRL = 0, - BL_ME_FIA_PCIE_ROOT_PORT_LINK_X1 = 0xF -} BL_ME_FIA_PCIE_ROOT_PORT_LINK_CONFIG; - -typedef struct _BL_ME_FIA_CONFIG { - BL_ME_FIA_MUX_CONFIG MuxConfiguration; - BL_ME_FIA_SATA_CONFIG SataLaneConfiguration; - BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG PcieRootPortsConfiguration; -} BL_ME_FIA_CONFIG; - -/* - * The FIA_MUX_CONFIG block describes the expected configuration of - * FIA MUX configuration. - */ -typedef struct { - UINT32 SkuNumLanesAllowed; // Platform view of Num Lanes allowed - BL_ME_FIA_CONFIG FiaMuxConfig; // Current Platform FIA MUX Configuration - BL_ME_FIA_CONFIG FiaMuxConfigRequest; // FIA MUX Configuration Requested -} BL_FIA_MUX_CONFIG; - -/* - * The FIA_MUX_CONFIG_STATUS describes the status of configuring - * FIA MUX configuration. -*/ -typedef struct { - UINT64 FiaMuxConfigGetStatus; // Status returned from FiaMuxConfigGet, - // if not EFI_SUCCESS, then error occurred - // and user can decide on next steps - UINT64 FiaMuxConfigSetStatus; // Status returned from FiaMuxConfigSet, - // if not EFI_SUCCESS, then error occurred - // and user can decide on next steps - BOOLEAN FiaMuxConfigSetRequired; // Boolean: true - a FiaMuxConfigSet - // was required, false otherwise -} BL_FIA_MUX_CONFIG_STATUS; - -/* -* FIA MUX Config HOB structure -*/ -typedef struct { - BL_FIA_MUX_CONFIG FiaMuxConfig; - BL_FIA_MUX_CONFIG_STATUS FiaMuxConfigStatus; -} BL_FIA_MUX_CONFIG_HOB; - -/* PCIe port bifurcation codes - matches setup option values */ -#define PCIE_BIF_CTRL_x2x2x2x2 0 -#define PCIE_BIF_CTRL_x2x2x4 1 -#define PCIE_BIF_CTRL_x4x2x2 2 -#define PCIE_BIF_CTRL_x4x4 3 -#define PCIE_BIF_CTRL_x8 4 - -#define BL_MAX_PCIE_CTRL 2 - -/* - * HSIO INFORMATION structure - */ -typedef enum { - BL_SKU_HSIO_06 = 6, - BL_SKU_HSIO_08 = 8, - BL_SKU_HSIO_10 = 10, - BL_SKU_HSIO_12 = 12, - BL_SKU_HSIO_20 = 20, -} BL_SKU_HSIO_LANE_NUMBER; - -typedef struct { - UINT16 NumLanesSupported; - UINT8 PcieBifCtr[BL_MAX_PCIE_CTRL]; - BL_ME_FIA_CONFIG FiaConfig; -} BL_HSIO_INFORMATION; - -/* - * eMMC DLL structure for EMMC DLL registers settings - */ -typedef struct { - UINT32 TxCmdCntl; - UINT32 TxDataCntl1; - UINT32 TxDataCntl2; - UINT32 RxCmdDataCntl1; - UINT32 RxStrobeCntl; - UINT32 RxCmdDataCntl2; - UINT32 MasterSwCntl; -} BL_EMMC_DLL_CONFIG; - -typedef struct { - UINT16 Signature; - BL_EMMC_DLL_CONFIG eMMCDLLConfig; -} BL_EMMC_INFORMATION; - -typedef enum { - BL_FAST_BOOT_CHECKER_NORMAL = 0, - BL_FAST_BOOT_CHECKER_WARNING, - BL_FAST_BOOT_CHECKER_CRITICAL -} BL_FAST_BOOT_CHECKER; - -#define BL_MAX_SCRUB_SEGMENTS 5 - -typedef struct { - UINT16 Start; // Determines the low range for a memory segment (in MB) - UINT16 End; // Determines the high range for a memory segment (in MB) -} BL_SCRUB_SEGMENT; - -typedef struct { - UINT8 NumberOfSegments; - UINT8 Reserved; - BL_SCRUB_SEGMENT ScrubSegment[BL_MAX_SCRUB_SEGMENTS]; -} BL_MEMORY_SCRUB_SEGMENTS; - -/** Fsp M Configuration -**/ -typedef struct { - - /** Offset 0x0040 - Tseg Size - Size of SMRAM memory reserved. - 2:2 MB, 4:4 MB, 8:8 MB, 16:16 MB - **/ - UINT8 PcdSmmTsegSize; - - /** Offset 0x0041 - FSP Debug Print Level - Select the FSP debug message print level. - 0:NO DEBUG, 1:MIN DEBUG, 2:MED DEBUG, 3:VERBOSE DEBUG - **/ - UINT8 PcdFspDebugPrintErrorLevel; - - /** Offset 0x0042 - Channel 0 DIMM 0 SPD SMBus Address - SPD SMBus Address of each DIMM slot. - **/ - UINT8 PcdSpdSmbusAddress_0_0; - - /** Offset 0x0043 - Channel 0 DIMM 1 SPD SMBus Address - SPD SMBus Address of each DIMM slot. - **/ - UINT8 PcdSpdSmbusAddress_0_1; - - /** Offset 0x0044 - Channel 1 DIMM 0 SPD SMBus Address - SPD SMBus Address of each DIMM slot. - **/ - UINT8 PcdSpdSmbusAddress_1_0; - - /** Offset 0x0045 - Channel 1 DIMM 1 SPD SMBus Address - SPD SMBus Address of each DIMM slot. - **/ - UINT8 PcdSpdSmbusAddress_1_1; - - /** Offset 0x0046 - Enable Rank Margin Tool - Enable/disable Rank Margin Tool. - $EN_DIS - **/ - UINT8 PcdMrcRmtSupport; - - /** Offset 0x0047 - RMT CPGC exp_loop_cnt - Set the CPGC exp_loop_cnt field for RMT execution 2^(exp_loop_cnt -1). - 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, - 13:13, 14:14, 15:15 - **/ - UINT8 PcdMrcRmtCpgcExpLoopCntValue; - - /** Offset 0x0048 - RMT CPGC num_bursts - Set the CPGC num_bursts field for RMT execution 2^(num_bursts -1). - 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, - 13:13, 14:14, 15:15 - **/ - UINT8 PcdMrcRmtCpgcNumBursts; - - /** Offset 0x0049 - Preserve Memory Across Reset - Enable/disable memory preservation across reset. - $EN_DIS - **/ - UINT8 PcdMemoryPreservation; - - /** Offset 0x004A - Fast Boot - Enable/disable Fast Boot function. Once enabled, all following boots - will use the - presaved MRC data to improve the boot performance. - $EN_DIS - **/ - UINT8 PcdFastBoot; - - /** Offset 0x004B - ECC Support - Enable/disable ECC Support. - $EN_DIS - **/ - UINT8 PcdEccSupport; - - /** Offset 0x004C - HSUART Device - Select the PCI High Speed UART Device for Serial Port. - 0:HSUART0, 1:HSUART1, 2:HSUART2 - **/ - UINT8 PcdHsuartDevice; - - /** Offset 0x004D - Memory Down - Enable/disable Memory Down function. - $EN_DIS - **/ - UINT8 PcdMemoryDown; - - /** Offset 0x004E - **/ - UINT32 PcdMemoryDownConfigPtr; - - /** Offset 0x0052 - SATA Controller 0 - Enable/disable SATA Controller 0. - $EN_DIS - **/ - UINT8 PcdEnableSATA0; - - /** Offset 0x0053 - SATA Controller 1 - Enable/disable SATA Controller 1. - $EN_DIS - **/ - UINT8 PcdEnableSATA1; - - /** Offset 0x0054 - Intel Quick Assist Technology - Enable/disable Intel Quick Assist Technology. - $EN_DIS - **/ - UINT8 PcdEnableIQAT; - - /** Offset 0x0055 - SPD Write Disable - Select SMBus SPD Write Enable State (Default: 0 = [FORCE_ENABLE], 1 = - [FORCE_DISABLE]) - 0:Force Enable, 1:Force Disable - **/ - UINT8 PcdSmbusSpdWriteDisable; - - /** Offset 0x0056 - ME_SHUTDOWN Message - Enable/Disable sending ME_SHUTDOWN message to ME, refer to FSP - Integration Guide - for details. - $EN_DIS - **/ - UINT8 PcdEnableMeShutdown; - - /** Offset 0x0057 - XHCI Controller - Enable / Disable XHCI controller - $EN_DIS - **/ - UINT8 PcdEnableXhci; - - /** Offset 0x0058 - Memory Frequency - Set DDR Memory Frequency, refer to FSP Integration Guide for details. - 15:Auto, 3:1600, 4:1866, 5:2133, 6:2400 - **/ - UINT8 PcdDdrFreq; - - /** Offset 0x0059 - MMIO Size - Set memory mapped IO space size - 0:2048M, 1:1024M, 2:3072M - **/ - UINT8 PcdMmioSize; - - /** Offset 0x005A - ME HECI Communication - Enable/Disable ME HECI communication - $EN_DIS - **/ - UINT8 PcdMeHeciCommunication; - - /** Offset 0x005B - HSIO Lanes Number - HSIO lanes number of SKU - 6:6, 8:8, 10:10, 12:12, 20:20 - **/ - UINT8 PcdHsioLanesNumber; - - /** Offset 0x005C - **/ - UINT32 PcdFiaMuxConfigPtr; - - /** Offset 0x0060 - Customer Revision - The Customer can set this revision string for their own purpose. - **/ - UINT8 PcdCustomerRevision[32]; - - /** Offset 0x0080 - 32-Bit bus mode - Enable/Disable 32-Bit bus memory mode. - $EN_DIS - **/ - UINT8 PcdHalfWidthEnable; - - /** Offset 0x0081 - TCL Performance - Enable/Disable Tcl timing for performance. - $EN_DIS - **/ - UINT8 PcdTclIdle; - - /** Offset 0x0082 - Interleave Mode - Select Interleave Mode - 0:DISABLED, 1:MODE0, 2:MODE1, 3:MODE2 - **/ - UINT8 PcdInterleaveMode; - - /** Offset 0x0083 - Memory Thermal Throttling - Enable/disable Memory Thermal Throttling management mode - $EN_DIS - **/ - UINT8 PcdMemoryThermalThrottling; - - /** Offset 0x0084 - Memory Test - Enable / Disable Memory Test, refer to FSP Integration Guide for - details. - $EN_DIS - **/ - UINT8 PcdSkipMemoryTest; - - /** Offset 0x0085 - **/ - BL_MEMORY_SCRUB_SEGMENTS *PcdScrubSegmentPtr; - - /** Offset 0x0089 - USB2 Port 1 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb2Port1Pin; - - /** Offset 0x008A - USB2 Port 2 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb2Port2Pin; - - /** Offset 0x008B - USB2 Port 3 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb2Port3Pin; - - /** Offset 0x008C - USB2 Port 4 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb2Port4Pin; - - /** Offset 0x008D - USB3 Port 1 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb3Port1Pin; - - /** Offset 0x008E - USB3 Port 2 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb3Port2Pin; - - /** Offset 0x008F - USB3 Port 3 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb3Port3Pin; - - /** Offset 0x0090 - USB3 Port 4 OC Pin - Map selected OC pin to the port - 0:OC Pin 0, 8:No pin mapped - **/ - UINT8 PcdUsb3Port4Pin; - - /** Offset 0x0091 - IOxAPIC 0-199 - Enable/disable IOxAPIC 24-119 entries - $EN_DIS - **/ - UINT8 PcdIOxAPIC0_199; - - /** Offset 0x0092 - DMAP_X16 - Enable/Disable DMAP_X16 dynamic MRC field indicating memory device - width is x16 or not - $EN_DIS - **/ - UINT8 PcdDmapX16; - - /** Offset 0x0093 - **/ - UINT8 UnusedUpdSpace0[333]; - - /** Offset 0x01E0 - **/ - UINT8 ReservedMemoryInitUpd[16]; -} FSP_M_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - - /** Offset 0x0000 - **/ - FSP_UPD_HEADER FspUpdHeader; - - /** Offset 0x0020 - **/ - FSPM_ARCH_UPD FspmArchUpd; - - /** Offset 0x0040 - **/ - FSP_M_CONFIG FspmConfig; - - /** Offset 0x01F0 - **/ - UINT8 UnusedUpdSpace1[14]; - - /** Offset 0x01FE - **/ - UINT16 UpdTerminator; -} FSPM_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h deleted file mode 100644 index f76f1a5e55..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h +++ /dev/null @@ -1,289 +0,0 @@ -/** @file - -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - -/** Fsp S Configuration -**/ -typedef struct { - - /** Offset 0x0020 - PCIe Controller 0 Bifurcation - Configure PCI Express controller 0 bifurcation. - 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 - **/ - UINT8 PcdBifurcationPcie0; - - /** Offset 0x0021 - PCIe Controller 1 Bifurcation - Configure PCI Express controller 1 bifurcation. - 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 - **/ - UINT8 PcdBifurcationPcie1; - - /** Offset 0x0022 - Active Core Count - Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores) - 0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, - 12:12, 13:13, - 14:14, 15:15 - **/ - UINT8 PcdActiveCoreCount; - - /** Offset 0x0023 - **/ - UINT32 PcdCpuMicrocodePatchBase; - - /** Offset 0x0027 - **/ - UINT32 PcdCpuMicrocodePatchSize; - - /** Offset 0x002B - PCIe Controller 0 - Enable / Disable PCI Express controller 0 - $EN_DIS - **/ - UINT8 PcdEnablePcie0; - - /** Offset 0x002C - PCIe Controller 1 - Enable / Disable PCI Express controller 1 - $EN_DIS - **/ - UINT8 PcdEnablePcie1; - - /** Offset 0x002D - Embedded Multi-Media Controller (eMMC) - Enable / Disable Embedded Multi-Media controller - $EN_DIS - **/ - UINT8 PcdEnableEmmc; - - /** Offset 0x002E - LAN Controllers - Enable / Disable LAN controllers, refer to FSP Integration Guide for - details. - 0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only - **/ - UINT8 PcdEnableGbE; - - /** Offset 0x002F - **/ - UINT32 PcdFiaMuxConfigRequestPtr; - - /** Offset 0x0033 - **/ - UINT8 UnusedUpdSpace0[4]; - - /** Offset 0x0037 - PCIe Root Port 0 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort0DeEmphasis; - - /** Offset 0x0038 - PCIe Root Port 1 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort1DeEmphasis; - - /** Offset 0x0039 - PCIe Root Port 2 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort2DeEmphasis; - - /** Offset 0x003A - PCIe Root Port 3 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort3DeEmphasis; - - /** Offset 0x003B - PCIe Root Port 4 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort4DeEmphasis; - - /** Offset 0x003C - PCIe Root Port 5 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort5DeEmphasis; - - /** Offset 0x003D - PCIe Root Port 6 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort6DeEmphasis; - - /** Offset 0x003E - PCIe Root Port 7 DeEmphasis - Desired DeEmphasis level for PCIE root port - 0:6dB, 1:3.5dB - **/ - UINT8 PcdPcieRootPort7DeEmphasis; - - /** Offset 0x003F - **/ - UINT8 UnusedUpdSpace1; - - /** Offset 0x0040 - **/ - UINT32 PcdEMMCDLLConfigPtr; - - /** Offset 0x0044 - PCIe Root Port 0 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort0LinkSpeed; - - /** Offset 0x0045 - PCIe Root Port 1 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort1LinkSpeed; - - /** Offset 0x0046 - PCIe Root Port 2 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort2LinkSpeed; - - /** Offset 0x0047 - PCIe Root Port 3 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort3LinkSpeed; - - /** Offset 0x0048 - PCIe Root Port 4 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort4LinkSpeed; - - /** Offset 0x0049 - PCIe Root Port 5 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort5LinkSpeed; - - /** Offset 0x004A - PCIe Root Port 6 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort6LinkSpeed; - - /** Offset 0x004B - PCIe Root Port 7 Link Speed - Upper limit on link operational speed for PCI Express RootPort - 1:GEN1, 2:GEN2, 3:GEN3 - **/ - UINT8 PcdPcieRootPort7LinkSpeed; - - /** Offset 0x004C - PCIe Root Port 0 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort0Aspm; - - /** Offset 0x004D - PCIe Root Port 1 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort1Aspm; - - /** Offset 0x004E - PCIe Root Port 2 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort2Aspm; - - /** Offset 0x004F - PCIe Root Port 3 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort3Aspm; - - /** Offset 0x0050 - PCIe Root Port 4 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort4Aspm; - - /** Offset 0x0051 - PCIe Root Port 5 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort5Aspm; - - /** Offset 0x0052 - PCIe Root Port 6 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort6Aspm; - - /** Offset 0x0053 - PCIe Root Port 7 ASPM - Enable PCI Express Active State Power Management settings - 0:Disabled, 2:L1 - **/ - UINT8 PcdPcieRootPort7Aspm; - - /** Offset 0x0054 - **/ - UINT8 UnusedUpdSpace2[140]; - - /** Offset 0x00E0 - **/ - UINT8 ReservedSiliconInitUpd[16]; -} FSP_S_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - - /** Offset 0x0000 - **/ - FSP_UPD_HEADER FspUpdHeader; - - /** Offset 0x0020 - **/ - FSP_S_CONFIG FspsConfig; - - /** Offset 0x00F0 - **/ - UINT8 UnusedUpdSpace3[14]; - - /** Offset 0x00FE - **/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h deleted file mode 100644 index f06f72bd3f..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h +++ /dev/null @@ -1,109 +0,0 @@ -/** @file - -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPTUPD_H__ -#define __FSPTUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - -/** Fsp T Core UPD -**/ -typedef struct { - - /** Offset 0x0020 - **/ - UINT32 MicrocodeRegionBase; - - /** Offset 0x0024 - **/ - UINT32 MicrocodeRegionLength; - - /** Offset 0x0028 - **/ - UINT32 CodeRegionBase; - - /** Offset 0x002C - **/ - UINT32 CodeRegionLength; - - /** Offset 0x0030 - **/ - UINT8 Reserved1[16]; -} FSPT_CORE_UPD; - -/** Fsp T Configuration -**/ -typedef struct { - - /** Offset 0x0040 - Disable Port80 output in FSP-T - Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output, - 2:Disable Port80 - Output, refer to FSP Integration Guide for details - 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output - **/ - UINT8 PcdFsptPort80RouteDisable; - - /** Offset 0x0041 - **/ - UINT8 ReservedTempRamInitUpd[31]; -} FSPT_CONFIG; - -/** Fsp T UPD Configuration -**/ -typedef struct { - - /** Offset 0x0000 - **/ - FSP_UPD_HEADER FspUpdHeader; - - /** Offset 0x0020 - **/ - FSPT_CORE_UPD FsptCoreUpd; - - /** Offset 0x0040 - **/ - FSPT_CONFIG FsptConfig; - - /** Offset 0x0060 - **/ - UINT8 UnusedUpdSpace0[30]; - - /** Offset 0x007E - **/ - UINT16 UpdTerminator; -} FSPT_UPD; - -#pragma pack() - -#endif |