diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/northbridge/intel/i440bx/raminit.c | 95 |
1 files changed, 63 insertions, 32 deletions
diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c index b3bea6b5f3..5c560e17de 100644 --- a/src/northbridge/intel/i440bx/raminit.c +++ b/src/northbridge/intel/i440bx/raminit.c @@ -352,34 +352,66 @@ SDRAM configuration functions. /** * Send the specified RAM command to all DIMMs. * - * @param TODO - * @param TODO + * @param command The RAM command to send to the DIMM(s). */ -static void do_ram_command(uint32_t command, uint32_t addr_offset) +static void do_ram_command(u32 command) { - int i; - uint16_t reg; - - /* TODO: Support for multiple DIMMs. */ + int i, caslatency; + u8 dimm_start, dimm_end; + u16 reg16; + u32 addr, addr_offset; /* Configure the RAM command. */ - reg = pci_read_config16(NB, SDRAMC); - reg &= 0xff1f; /* Clear bits 7-5. */ - reg |= (uint16_t) (command << 5); - pci_write_config16(NB, SDRAMC, reg); - - /* RAM_COMMAND_NORMAL affects only the memory controller and - doesn't need to be "sent" to the DIMMs. */ - /* if (command == RAM_COMMAND_NORMAL) return; */ - - PRINT_DEBUG(" Sending RAM command 0x"); - PRINT_DEBUG_HEX16(reg); - PRINT_DEBUG(" to 0x"); - PRINT_DEBUG_HEX32(0 + addr_offset); // FIXME - PRINT_DEBUG("\r\n"); - - /* Read from (DIMM start address + addr_offset). */ - read32(0 + addr_offset); // FIXME + reg16 = pci_read_config16(NB, SDRAMC); + reg16 &= 0xff1f; /* Clear bits 7-5. */ + reg16 |= (u16) (command << 5); /* Write command into bits 7-5. */ + pci_write_config16(NB, SDRAMC, reg16); + + /* + * RAM_COMMAND_NORMAL affects only the memory controller and + * doesn't need to be "sent" to the DIMMs. + */ + if (command == RAM_COMMAND_NORMAL) + return; + + /* Send the RAM command to each row of memory. */ + dimm_start = 0; + for (i = 0; i < (DIMM_SOCKETS * 2); i++) { + addr_offset = 0; + caslatency = 3; /* TODO: Dynamically get CAS latency later. */ + if (command == RAM_COMMAND_MRS) { + /* + * MAA[12:11,9:0] must be inverted when sent to DIMM + * 2 or 3 (no inversion if sent to DIMM 0 or 1). + */ + if ((i >= 0 && i <= 3) && caslatency == 3) + addr_offset = 0x1d0; + if ((i >= 4 && i <= 7) && caslatency == 3) + addr_offset = 0x1e28; + if ((i >= 0 && i <= 3) && caslatency == 2) + addr_offset = 0x150; + if ((i >= 4 && i <= 7) && caslatency == 2) + addr_offset = 0x1ea8; + } + + dimm_end = pci_read_config8(NB, DRB + i); + + addr = (dimm_start * 8 * 1024 * 1024) + addr_offset; + if (dimm_end > dimm_start) { +#if 0 + PRINT_DEBUG(" Sending RAM command 0x"); + PRINT_DEBUG_HEX16(reg16); + PRINT_DEBUG(" to 0x"); + PRINT_DEBUG_HEX32(addr); + PRINT_DEBUG("\r\n"); +#endif + + read32(addr); + } + + /* Set the start of the next DIMM. */ + dimm_start = dimm_end; + } } /*----------------------------------------------------------------------------- @@ -469,12 +501,11 @@ static void sdram_set_spd_registers(void) /* TODO: Set DRAMC. Don't enable refresh for now. */ pci_write_config8(NB, DRAMC, 0x08); - /* TODO: Set RPS. */ + /* TODO: Set RPS. Needs to be fixed for multiple DIMM support. */ pci_write_config16(NB, RPS, 0x0001); /* TODO: Set SDRAMC. */ - // pci_write_config16(NB, SDRAMC, 0x010f); // FIXME? - pci_write_config16(NB, SDRAMC, 0x0003); // FIXME? + pci_write_config16(NB, SDRAMC, 0x0010); /* SDRAMPWR=1: 4 DIMM config */ /* TODO: Set PGPOL. */ // pci_write_config16(NB, PGPOL, 0x0107); @@ -504,29 +535,29 @@ static void sdram_enable(void) /* 1. Apply NOP. Wait 200 clock cycles (200us should do). */ PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n"); - do_ram_command(RAM_COMMAND_NOP, 0); + do_ram_command(RAM_COMMAND_NOP); udelay(200); /* 2. Precharge all. Wait tRP. */ PRINT_DEBUG("RAM Enable 2: Precharge all\r\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0); + do_ram_command(RAM_COMMAND_PRECHARGE); udelay(1); /* 3. Perform 8 refresh cycles. Wait tRC each time. */ PRINT_DEBUG("RAM Enable 3: CBR\r\n"); for (i = 0; i < 8; i++) { - do_ram_command(RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR); udelay(1); } /* 4. Mode register set. Wait two memory cycles. */ PRINT_DEBUG("RAM Enable 4: Mode register set\r\n"); - do_ram_command(RAM_COMMAND_MRS, 0x1d0); + do_ram_command(RAM_COMMAND_MRS); udelay(2); /* 5. Normal operation. */ PRINT_DEBUG("RAM Enable 5: Normal operation\r\n"); - do_ram_command(RAM_COMMAND_NORMAL, 0); + do_ram_command(RAM_COMMAND_NORMAL); udelay(1); /* 6. Finally enable refresh. */ |