diff options
Diffstat (limited to 'src')
72 files changed, 319 insertions, 2050 deletions
diff --git a/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c6952b8..0000000000 --- a/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/google/butterfly/acpi_tables.c b/src/mainboard/google/butterfly/acpi_tables.c index dcaf3845be..cabc052b78 100644 --- a/src/mainboard/google/butterfly/acpi_tables.c +++ b/src/mainboard/google/butterfly/acpi_tables.c @@ -75,24 +75,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/google/butterfly/devicetree.cb b/src/mainboard/google/butterfly/devicetree.cb index daafeffb53..ed0d8d1887 100644 --- a/src/mainboard/google/butterfly/devicetree.cb +++ b/src/mainboard/google/butterfly/devicetree.cb @@ -39,15 +39,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index 6b7613a85b..80c0742985 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -62,47 +62,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index a4267bb253..0000000000 --- a/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 19 }, - Package() { 0x001cffff, 1, 0, 20 }, - Package() { 0x001cffff, 2, 0, 17 }, - Package() { 0x001cffff, 3, 0, 18 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, - Package() { 0x001fffff, 1, 0, 23 }, - Package() { 0x001fffff, 2, 0, 16 }, - Package() { 0x001fffff, 3, 0, 18 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKE, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - }) - } -} diff --git a/src/mainboard/google/link/acpi_tables.c b/src/mainboard/google/link/acpi_tables.c index 14baad2d45..d1d4fcba18 100644 --- a/src/mainboard/google/link/acpi_tables.c +++ b/src/mainboard/google/link/acpi_tables.c @@ -83,24 +83,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->lids = 1; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/google/link/devicetree.cb b/src/mainboard/google/link/devicetree.cb index 15aa432e64..5333dfc2c3 100644 --- a/src/mainboard/google/link/devicetree.cb +++ b/src/mainboard/google/link/devicetree.cb @@ -42,15 +42,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index 8236e2062d..f90d7e7728 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -78,44 +78,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P3IP WLAN INTA -> PIRQB - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * TRACKPAD -> PIRQE (Edge Triggered) - * TOUCHSCREEN -> PIRQG (Edge Triggered) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index a4267bb253..0000000000 --- a/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 19 }, - Package() { 0x001cffff, 1, 0, 20 }, - Package() { 0x001cffff, 2, 0, 17 }, - Package() { 0x001cffff, 3, 0, 18 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, - Package() { 0x001fffff, 1, 0, 23 }, - Package() { 0x001fffff, 2, 0, 16 }, - Package() { 0x001fffff, 3, 0, 18 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKE, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - }) - } -} diff --git a/src/mainboard/google/parrot/acpi_tables.c b/src/mainboard/google/parrot/acpi_tables.c index e4e1797731..0041c98fd4 100644 --- a/src/mainboard/google/parrot/acpi_tables.c +++ b/src/mainboard/google/parrot/acpi_tables.c @@ -74,24 +74,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->lids = 1; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/google/parrot/devicetree.cb b/src/mainboard/google/parrot/devicetree.cb index 2da7a5333b..a4baafd9ca 100644 --- a/src/mainboard/google/parrot/devicetree.cb +++ b/src/mainboard/google/parrot/devicetree.cb @@ -41,15 +41,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x8b" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index ce42b4126e..c25b419389 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -62,48 +62,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P2IP WLAN INTA -> PIRQB - * D28IP_P3IP ETH0 INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQE - * D26IP_E2P EHCI2 INTA -> PIRQE - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - * - * Trackpad DVT PIRQA (16) - * Trackpad DVT PIRQE (20) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (NOINT << D28IP_P1IP) | (INTA << D28IP_P2IP) | - (INTC << D28IP_P3IP) | (NOINT << D28IP_P4IP) | - (NOINT << D28IP_P5IP) | (NOINT << D28IP_P6IP) | - (NOINT << D28IP_P7IP) | (NOINT << D28IP_P8IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index cf3d82a181..0000000000 --- a/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 19 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 19 }, - Package() { 0x001cffff, 1, 0, 20 }, - Package() { 0x001cffff, 2, 0, 17 }, - Package() { 0x001cffff, 3, 0, 18 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, - Package() { 0x001fffff, 1, 0, 23 }, - Package() { 0x001fffff, 2, 0, 16 }, - Package() { 0x001fffff, 3, 0, 18 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKE, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, - }) - } -} diff --git a/src/mainboard/google/stout/acpi_tables.c b/src/mainboard/google/stout/acpi_tables.c index 504ae64e3e..23c47f96f5 100644 --- a/src/mainboard/google/stout/acpi_tables.c +++ b/src/mainboard/google/stout/acpi_tables.c @@ -80,24 +80,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->xhci = XHCI_MODE; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/google/stout/devicetree.cb b/src/mainboard/google/stout/devicetree.cb index 97e2c09a0f..4ac89f629f 100644 --- a/src/mainboard/google/stout/devicetree.cb +++ b/src/mainboard/google/stout/devicetree.cb @@ -40,15 +40,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 728d74d842..6290e03165 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -68,48 +68,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D20IP_XHCI XHCI INTA -> PIRQD (MSI) - * D26IP_E2P EHCI #2 INTA -> PIRQF - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * D28IP_P2IP WLAN INTA -> PIRQD - * D28IP_P3IP Card Reader INTB -> PIRQE - * D28IP_P6IP LAN INTC -> PIRQB - * D29IP_E1P EHCI #1 INTA -> PIRQD - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (NOINT << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (NOINT << D28IP_P1IP) | (INTA << D28IP_P2IP) | - (INTB << D28IP_P3IP) | (NOINT << D28IP_P4IP) | - (NOINT << D28IP_P5IP) | (INTC << D28IP_P6IP) | - (NOINT << D28IP_P7IP) | (NOINT << D28IP_P8IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - RCBA32(D20IP) = (INTA << D20IP_XHCIIP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQD, PIRQE, PIRQB, PIRQC); - DIR_ROUTE(D27IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D26IR, PIRQF, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/intel/cougar_canyon2/devicetree.cb b/src/mainboard/intel/cougar_canyon2/devicetree.cb index 42b1535f5b..c386853a1c 100644 --- a/src/mainboard/intel/cougar_canyon2/devicetree.cb +++ b/src/mainboard/intel/cougar_canyon2/devicetree.cb @@ -32,15 +32,6 @@ chip northbridge/intel/fsp_sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/fsp_bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - register "sata_port_map" = "0x3f" register "c2_latency" = "1" diff --git a/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl b/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index a57f9f1f55..0000000000 --- a/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 20 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/emeraldlake2/acpi_tables.c b/src/mainboard/intel/emeraldlake2/acpi_tables.c index 3d95586869..f17e1f4819 100644 --- a/src/mainboard/intel/emeraldlake2/acpi_tables.c +++ b/src/mainboard/intel/emeraldlake2/acpi_tables.c @@ -92,24 +92,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/intel/emeraldlake2/devicetree.cb b/src/mainboard/intel/emeraldlake2/devicetree.cb index 75643f4a5b..e5a8ea0edd 100644 --- a/src/mainboard/intel/emeraldlake2/devicetree.cb +++ b/src/mainboard/intel/emeraldlake2/devicetree.cb @@ -32,15 +32,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 220b1d731d..d50093e08d 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -73,43 +73,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQE - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl b/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index ceb40be356..0000000000 --- a/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Ivybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // LPC devices 0:1f.x - // D31IP_TTIP THRT INTC -> PIRQC - Package() { 0x001fffff, 2, 0, 18 },// D31IP_SMIP SMBUS INTC -> PIRQC - Package() { 0x001fffff, 1, 0, 19 },// D31IP_SIP SATA INTB -> PIRQD (MSI) - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 23 },// D29IP_E1P EHCI1 INTA -> PIRQH - // PCIe Root Ports 0:1c.x - // D28IP_P8IP Slot? INTD -> PIRQD - Package() { 0x001cffff, 3, 0, 19 },// D28IP_P4IP ETH2 INTD -> PIRQD (MSI) - // D28IP_P7IP PCIEx1 INTC -> PIRQC - Package() { 0x001cffff, 2, 0, 18 },// D28IP_P3IP ETH1 INTC -> PIRQC (MSI) - // D28IP_P6IP 1394 INTB -> PIRQB (MSI) - Package() { 0x001cffff, 1, 0, 17 },// D28IP_P2IP Slot? INTB -> PIRQB - // D28IP_P5IP GbEPHY INTA -> PIRQA - Package() { 0x001cffff, 0, 0, 16 },// D28IP_P1IP Slot? INTA -> PIRQA - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 },// D27IP_ZIP HDA INTA -> PIRQG (MSI) - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 16 },// D26IP_E2P EHCI2 INTA -> PIRQA - // ETH0 0:19.0 - Package() { 0x0019ffff, 0, 0, 20 },// D25IP_LIP ETH0 INTA -> PIRQE (MSI) - // xHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 16 },// D20IP_XHCIIP xHCI INTA -> PIRQA (MSI) - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // PCIe PEG x16 0:1.0 - Package() { 0x0001ffff, 3, 0, 19 },// PEGx16 INTD -> PIRQD - Package() { 0x0001ffff, 2, 0, 18 },// PEGx16 INTC -> PIRQC - Package() { 0x0001ffff, 1, 0, 17 },// PEGx16 INTB -> PIRQB - Package() { 0x0001ffff, 0, 0, 16 },// PEGx16 INTA -> PIRQA - }) - } Else { - Return (Package() { - // LPC devices 0:1f.x - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // ETH0 0:19.0 - Package() { 0x0019ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, - // xHCI 0:14.0 - Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe PEG x16 0:1.0 - Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/kontron/ktqm77/acpi_tables.c b/src/mainboard/kontron/ktqm77/acpi_tables.c index 0d90403bf0..d2d70e9fca 100644 --- a/src/mainboard/kontron/ktqm77/acpi_tables.c +++ b/src/mainboard/kontron/ktqm77/acpi_tables.c @@ -63,24 +63,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) acpi_update_thermal_table(gnvs); } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/kontron/ktqm77/devicetree.cb b/src/mainboard/kontron/ktqm77/devicetree.cb index fb180577a9..855fd5c7f6 100644 --- a/src/mainboard/kontron/ktqm77/devicetree.cb +++ b/src/mainboard/kontron/ktqm77/devicetree.cb @@ -27,15 +27,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8b" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x8b" - register "pirqf_routing" = "0x8b" - register "pirqg_routing" = "0x8b" - register "pirqh_routing" = "0x8b" - # Enable all SATA ports 0-5 register "sata_port_map" = "0x3f" # Set max SATA speed to 6.0 Gb/s (should be the default, anyway) diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index 401314cd8d..bfe7715826 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -59,63 +59,7 @@ static void rcba_config(void) { u32 reg32; - /* - * D31IP_TTIP THRT INTC -> PIRQC - * D31IP_SIP2 SATA2 NOINT - * D31IP_SMIP SMBUS INTC -> PIRQC - * D31IP_SIP SATA INTB -> PIRQD (MSI) - * D29IP_E1P EHCI1 INTA -> PIRQH - * D28IP_P8IP Slot? INTD -> PIRQD - * D28IP_P7IP PCIEx1 INTC -> PIRQC - * D28IP_P6IP 1394 INTB -> PIRQB (MSI) - * D28IP_P5IP GbEPHY INTA -> PIRQA - * D28IP_P4IP ETH2 INTD -> PIRQD (MSI) - * D28IP_P3IP ETH1 INTC -> PIRQC (MSI) - * D28IP_P2IP Slot? INTB -> PIRQB - * D28IP_P1IP Slot? INTA -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - * D26IP_E2P EHCI2 INTA -> PIRQA - * D25IP_LIP ETH0 INTA -> PIRQE (MSI) - * D22IP_KTIP MEI NOINT - * D22IP_IDERIP MEI NOINT - * D22IP_MEI2IP MEI NOINT - * D22IP_MEI1IP MEI NOINT - * D20IP_XHCIIP XHCI INTA -> PIRQA (MSI) - * GFX INTA -> PIRQA (MSI) - * PEGx16 INTA -> PIRQA - * INTB -> PIRQB - * INTC -> PIRQC - * INTD -> PIRQD - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP) | (INTD << D28IP_P4IP) | - (INTA << D28IP_P5IP) | (INTB << D28IP_P6IP) | - (INTC << D28IP_P7IP) | (INTD << D28IP_P8IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (INTA << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - RCBA32(D20IP) = (INTA << D20IP_XHCIIP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); - DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); - DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D26IR, PIRQA, PIRQF, PIRQC, PIRQD); - DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); - DIR_ROUTE(D20IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index b4b81a2270..0000000000 --- a/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P2IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P4IP EXC INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P5IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/t520/acpi_tables.c b/src/mainboard/lenovo/t520/acpi_tables.c index 26a459dfaf..15b9d9a4e4 100644 --- a/src/mainboard/lenovo/t520/acpi_tables.c +++ b/src/mainboard/lenovo/t520/acpi_tables.c @@ -65,24 +65,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) acpi_update_thermal_table(gnvs); } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb index 065261a8c0..d2a4d6b9b7 100644 --- a/src/mainboard/lenovo/t520/devicetree.cb +++ b/src/mainboard/lenovo/t520/devicetree.cb @@ -44,15 +44,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c index 83be0c7f86..f7866a86ad 100644 --- a/src/mainboard/lenovo/t520/romstage.c +++ b/src/mainboard/lenovo/t520/romstage.c @@ -60,48 +60,6 @@ void pch_enable_lpc(void) void rcba_config(void) { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P2IP WLAN INTA -> PIRQB - * D28IP_P4IP EXC INTB -> PIRQF - * D28IP_P5IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P2IP) | (INTB << D28IP_P4IP) | - (INTC << D28IP_P5IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - /* Disable unused devices (board specific) */ RCBA32(FD) = 0x1ee51fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c6952b8..0000000000 --- a/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/t530/acpi_tables.c b/src/mainboard/lenovo/t530/acpi_tables.c index 26a459dfaf..15b9d9a4e4 100644 --- a/src/mainboard/lenovo/t530/acpi_tables.c +++ b/src/mainboard/lenovo/t530/acpi_tables.c @@ -65,24 +65,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) acpi_update_thermal_table(gnvs); } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/lenovo/t530/devicetree.cb b/src/mainboard/lenovo/t530/devicetree.cb index ec3913c5f6..c44f927747 100644 --- a/src/mainboard/lenovo/t530/devicetree.cb +++ b/src/mainboard/lenovo/t530/devicetree.cb @@ -44,15 +44,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/lenovo/t530/romstage.c b/src/mainboard/lenovo/t530/romstage.c index 115f83bdbc..0a49ed05c3 100644 --- a/src/mainboard/lenovo/t530/romstage.c +++ b/src/mainboard/lenovo/t530/romstage.c @@ -47,48 +47,6 @@ void pch_enable_lpc(void) void rcba_config(void) { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - /* Disable unused devices (board specific) */ RCBA32(FD) = 0x17f81fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl b/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl deleted file mode 100644 index 3e9e1b3ca7..0000000000 --- a/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing. - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0001ffff, 0, 0, 0x10 }, - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x0003ffff, 0, 0, 0x10 }, - Package() { 0x0016ffff, 0, 0, 0x10 }, // ME - Package() { 0x0016ffff, 1, 0, 0x11 }, // ME - Package() { 0x0016ffff, 2, 0, 0x12 }, // ME - Package() { 0x0016ffff, 3, 0, 0x13 }, // ME - Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet - Package() { 0x001affff, 0, 0, 0x14 }, // USB - Package() { 0x001affff, 1, 0, 0x15 }, // USB - Package() { 0x001affff, 2, 0, 0x16 }, // USB - Package() { 0x001affff, 3, 0, 0x17 }, // USB - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x11 }, // SATA - Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS - }) - } Else { - Return (Package() { - Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // ME - Package() { 0x0016ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // ME - Package() { 0x0016ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, // ME - Package() { 0x0016ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, // ME - Package() { 0x0019ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, // Ethernet - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, // USB - Package() { 0x001affff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, // USB - Package() { 0x001affff, 2, \_SB.PCI0.LPCB.LNKG, 0 }, // USB - Package() { 0x001affff, 3, \_SB.PCI0.LPCB.LNKH, 0 }, // USB - Package() { 0x001bffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, // PCI - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, // PCI - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKG, 0 }, // PCI - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKH, 0 }, // PCI - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, // SATA - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } // SMBus - }) - } -} diff --git a/src/mainboard/lenovo/x201/acpi_tables.c b/src/mainboard/lenovo/x201/acpi_tables.c index b8979f495a..85eabc7d1f 100644 --- a/src/mainboard/lenovo/x201/acpi_tables.c +++ b/src/mainboard/lenovo/x201/acpi_tables.c @@ -48,42 +48,6 @@ void acpi_create_gnvs(global_nvs_t * gnvs) gnvs->did[4] = 0x00000005; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 1, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, - MP_IRQ_POLARITY_DEFAULT | - MP_IRQ_TRIGGER_DEFAULT); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_LEVEL); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 2, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 3, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { /* Not implemented */ diff --git a/src/mainboard/lenovo/x201/devicetree.cb b/src/mainboard/lenovo/x201/devicetree.cb index 614245cba9..117c25c891 100644 --- a/src/mainboard/lenovo/x201/devicetree.cb +++ b/src/mainboard/lenovo/x201/devicetree.cb @@ -93,15 +93,6 @@ chip northbridge/intel/nehalem subsystemid 0x17aa 0x215a end chip southbridge/intel/ibexpeak - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/lenovo/x201/romstage.c b/src/mainboard/lenovo/x201/romstage.c index 2c3dfd1bcc..e58f5f6d5e 100644 --- a/src/mainboard/lenovo/x201/romstage.c +++ b/src/mainboard/lenovo/x201/romstage.c @@ -75,41 +75,9 @@ static void pch_enable_lpc(void) static void rcba_config(void) { + southbridge_configure_default_intmap(); + static const u32 rcba_dump3[] = { - /* 30fc */ 0x00000000, - /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, - /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, - /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, - /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, - /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, - /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, - /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -179,8 +147,8 @@ static void rcba_config(void) }; unsigned i; for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x30fc); + RCBA32(4 * i + 0x3310) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x3310); } } diff --git a/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c6952b8..0000000000 --- a/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/x220/acpi_tables.c b/src/mainboard/lenovo/x220/acpi_tables.c index 26a459dfaf..15b9d9a4e4 100644 --- a/src/mainboard/lenovo/x220/acpi_tables.c +++ b/src/mainboard/lenovo/x220/acpi_tables.c @@ -65,24 +65,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) acpi_update_thermal_table(gnvs); } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/lenovo/x220/devicetree.cb b/src/mainboard/lenovo/x220/devicetree.cb index c1bea43e99..982e30bb09 100644 --- a/src/mainboard/lenovo/x220/devicetree.cb +++ b/src/mainboard/lenovo/x220/devicetree.cb @@ -48,15 +48,6 @@ chip northbridge/intel/sandybridge end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index ba48fac574..d9c8aa04e1 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -57,48 +57,6 @@ void pch_enable_lpc(void) void rcba_config(void) { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - /* Disable unused devices (board specific) */ RCBA32(FD) = 0x1fe41fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c6952b8..0000000000 --- a/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/x230/acpi_tables.c b/src/mainboard/lenovo/x230/acpi_tables.c index 26a459dfaf..15b9d9a4e4 100644 --- a/src/mainboard/lenovo/x230/acpi_tables.c +++ b/src/mainboard/lenovo/x230/acpi_tables.c @@ -65,24 +65,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) acpi_update_thermal_table(gnvs); } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/lenovo/x230/devicetree.cb b/src/mainboard/lenovo/x230/devicetree.cb index c44a2b7a1a..5130410e90 100644 --- a/src/mainboard/lenovo/x230/devicetree.cb +++ b/src/mainboard/lenovo/x230/devicetree.cb @@ -48,15 +48,6 @@ chip northbridge/intel/sandybridge end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/lenovo/x230/romstage.c b/src/mainboard/lenovo/x230/romstage.c index 2c39741770..0bb137e732 100644 --- a/src/mainboard/lenovo/x230/romstage.c +++ b/src/mainboard/lenovo/x230/romstage.c @@ -60,48 +60,6 @@ void pch_enable_lpc(void) void rcba_config(void) { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - /* Disable unused devices (board specific) */ RCBA32(FD) = 0x17f81fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl b/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl deleted file mode 100644 index 1f782c8c89..0000000000 --- a/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing. - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0001ffff, 0, 0, 0x10 }, - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x0003ffff, 0, 0, 0x10 }, - Package() { 0x0016ffff, 0, 0, 0x10 }, // ME - Package() { 0x0016ffff, 1, 0, 0x11 }, // ME - Package() { 0x0016ffff, 2, 0, 0x12 }, // ME - Package() { 0x0016ffff, 3, 0, 0x13 }, // ME - Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet - Package() { 0x001affff, 0, 0, 0x14 }, // USB - Package() { 0x001affff, 1, 0, 0x15 }, // USB - Package() { 0x001affff, 2, 0, 0x16 }, // USB - Package() { 0x001affff, 3, 0, 0x17 }, // USB - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x10 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x11 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x12 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x13 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x11 }, // SATA - Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS - }) - } Else { - Return (Package() { - Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // ME - Package() { 0x0016ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // ME - Package() { 0x0016ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, // ME - Package() { 0x0016ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, // ME - Package() { 0x0019ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, // Ethernet - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, // USB - Package() { 0x001affff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, // USB - Package() { 0x001affff, 2, \_SB.PCI0.LPCB.LNKG, 0 }, // USB - Package() { 0x001affff, 3, \_SB.PCI0.LPCB.LNKH, 0 }, // USB - Package() { 0x001bffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // PCI - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // PCI - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, // PCI - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, // PCI - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, // SATA - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } // SMBus - }) - } -} diff --git a/src/mainboard/packardbell/ms2290/acpi_tables.c b/src/mainboard/packardbell/ms2290/acpi_tables.c index b8979f495a..85eabc7d1f 100644 --- a/src/mainboard/packardbell/ms2290/acpi_tables.c +++ b/src/mainboard/packardbell/ms2290/acpi_tables.c @@ -48,42 +48,6 @@ void acpi_create_gnvs(global_nvs_t * gnvs) gnvs->did[4] = 0x00000005; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 1, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, - MP_IRQ_POLARITY_DEFAULT | - MP_IRQ_TRIGGER_DEFAULT); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_LEVEL); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 2, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 3, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { /* Not implemented */ diff --git a/src/mainboard/packardbell/ms2290/devicetree.cb b/src/mainboard/packardbell/ms2290/devicetree.cb index 19f6c9c207..2f4bce11dc 100644 --- a/src/mainboard/packardbell/ms2290/devicetree.cb +++ b/src/mainboard/packardbell/ms2290/devicetree.cb @@ -54,15 +54,6 @@ chip northbridge/intel/nehalem subsystemid 0x1025 0x0379 end chip southbridge/intel/ibexpeak - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/packardbell/ms2290/romstage.c b/src/mainboard/packardbell/ms2290/romstage.c index d33a9baf71..ca96c87f5d 100644 --- a/src/mainboard/packardbell/ms2290/romstage.c +++ b/src/mainboard/packardbell/ms2290/romstage.c @@ -70,41 +70,9 @@ static void pch_enable_lpc(void) static void rcba_config(void) { + southbridge_configure_default_intmap(); + static const u32 rcba_dump3[] = { - /* 30fc */ 0x00000000, - /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, - /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, - /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, - /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, - /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, - /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, - /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -173,9 +141,10 @@ static void rcba_config(void) /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, }; unsigned i; + for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x30fc); + RCBA32(4 * i + 0x3310) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x3310); } } diff --git a/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index aff2351625..0000000000 --- a/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 16 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 17 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 16 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 17 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKB, 0 }, - }) - } -} diff --git a/src/mainboard/samsung/lumpy/acpi_tables.c b/src/mainboard/samsung/lumpy/acpi_tables.c index 24a0efd960..6d8517ca13 100644 --- a/src/mainboard/samsung/lumpy/acpi_tables.c +++ b/src/mainboard/samsung/lumpy/acpi_tables.c @@ -93,24 +93,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->chromeos.vbt2 = ec_read(0xcb) ? ACTIVE_ECFW_RW : ACTIVE_ECFW_RO; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb index f1df61058b..9b0fc40de9 100644 --- a/src/mainboard/samsung/lumpy/devicetree.cb +++ b/src/mainboard/samsung/lumpy/devicetree.cb @@ -42,15 +42,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index cf2973d32a..6595f0d3dd 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -75,41 +75,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC (MSI) - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQB - * D31IP_SIP SATA INTA -> PIRQA (MSI) - * D31IP_SMIP SMBUS INTC -> PIRQH - * D31IP_TTIP THRT INTB -> PIRQG - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - * - * LIGHTSENSOR -> PIRQE (Edge Triggered) - * TRACKPAD -> PIRQF (Edge Triggered) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTB << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTC << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQA, PIRQG, PIRQH, PIRQB); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQB, PIRQC, PIRQD, PIRQA); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + southbridge_configure_default_intmap(); /* Enable IOAPIC (generic) */ RCBA16(OIC) = 0x0100; diff --git a/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 2636f1320b..0000000000 --- a/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 20 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/samsung/stumpy/acpi_tables.c b/src/mainboard/samsung/stumpy/acpi_tables.c index 2d24822f72..dc2197a967 100644 --- a/src/mainboard/samsung/stumpy/acpi_tables.c +++ b/src/mainboard/samsung/stumpy/acpi_tables.c @@ -93,24 +93,6 @@ void acpi_create_gnvs(global_nvs_t *gnvs) gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; } -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - unsigned long acpi_fill_slit(unsigned long current) { // Not implemented diff --git a/src/mainboard/samsung/stumpy/devicetree.cb b/src/mainboard/samsung/stumpy/devicetree.cb index 618d1e097d..60b112b5d1 100644 --- a/src/mainboard/samsung/stumpy/devicetree.cb +++ b/src/mainboard/samsung/stumpy/devicetree.cb @@ -33,15 +33,6 @@ chip northbridge/intel/sandybridge device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index 625903d3f6..2c651ae799 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -87,43 +87,7 @@ static void rcba_config(void) { u32 reg32; - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQE - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); + southbridge_configure_default_intmap(); /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/northbridge/intel/nehalem/acpi/hostbridge.asl b/src/northbridge/intel/nehalem/acpi/hostbridge.asl index e826bd6bca..79736bcafd 100644 --- a/src/northbridge/intel/nehalem/acpi/hostbridge.asl +++ b/src/northbridge/intel/nehalem/acpi/hostbridge.asl @@ -343,6 +343,3 @@ Method (_CRS, 0, Serialized) Return (MCRS) } - -/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ -#include "acpi/nehalem_pci_irqs.asl" diff --git a/src/northbridge/intel/sandybridge/acpi/hostbridge.asl b/src/northbridge/intel/sandybridge/acpi/hostbridge.asl index 690c072e72..427927182d 100644 --- a/src/northbridge/intel/sandybridge/acpi/hostbridge.asl +++ b/src/northbridge/intel/sandybridge/acpi/hostbridge.asl @@ -378,6 +378,3 @@ Method (_CRS, 0, Serialized) Return (MCRS) } - -/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ -#include "acpi/sandybridge_pci_irqs.asl" diff --git a/src/northbridge/intel/sandybridge/romstage_native.c b/src/northbridge/intel/sandybridge/romstage_native.c index 67c64d7898..902d66d0b9 100644 --- a/src/northbridge/intel/sandybridge/romstage_native.c +++ b/src/northbridge/intel/sandybridge/romstage_native.c @@ -91,6 +91,7 @@ void main(unsigned long bist) timestamp_add_now(TS_AFTER_INITRAM); post_code(0x3c); + southbridge_configure_default_intmap(); rcba_config(); post_code(0x3d); diff --git a/src/southbridge/intel/bd82x6x/Makefile.inc b/src/southbridge/intel/bd82x6x/Makefile.inc index 621a74341c..83de051d51 100644 --- a/src/southbridge/intel/bd82x6x/Makefile.inc +++ b/src/southbridge/intel/bd82x6x/Makefile.inc @@ -51,12 +51,15 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me.c me_8.x.c finalize.c pch.c romstage-y += early_smbus.c me_status.c gpio.c romstage-y += reset.c romstage-y += early_spi.c early_pch.c +romstage-y += early_rcba.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += early_me.c early_usb.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += early_me.c early_usb.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE) += early_thermal.c early_pch_native.c early_me_native.c early_usb_native.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE) += early_thermal.c early_pch_native.c early_me_native.c early_usb_native.c +ramstage-y += madt.c + ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) IFD_BIN_PATH := $(objgenerated)/ifdfake.bin IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \ diff --git a/src/southbridge/intel/bd82x6x/acpi/irq.asl b/src/southbridge/intel/bd82x6x/acpi/irq.asl new file mode 100644 index 0000000000..61e33357e5 --- /dev/null +++ b/src/southbridge/intel/bd82x6x/acpi/irq.asl @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* PCI Interrupt Routing */ +Method(_PRT) +{ + If (PICM) { + Return (Package() { + /* Onboard graphics (IGD) 0:2.0 */ + Package() { 0x0002ffff, 0, 0, 16 },/* GFX INTA -> PIRQA (MSI) */ + /* XHCI 0:14.0 (ivy only) */ + Package() { 0x0014ffff, 0, 0, 19 }, + /* High Definition Audio 0:1b.0 */ + Package() { 0x001bffff, 0, 0, 16 },/* D27IP_ZIP HDA INTA -> PIRQA (MSI) */ + /* PCIe Root Ports 0:1c.x */ + Package() { 0x001cffff, 0, 0, 17 },/* D28IP_P1IP PCIe INTA -> PIRQB */ + Package() { 0x001cffff, 1, 0, 21 },/* D28IP_P2IP PCIe INTB -> PIRQF */ + Package() { 0x001cffff, 2, 0, 19 },/* D28IP_P3IP PCIe INTC -> PIRQD */ + Package() { 0x001cffff, 3, 0, 20 },/* D28IP_P3IP PCIe INTD -> PIRQE */ + /* EHCI #1 0:1d.0 */ + Package() { 0x001dffff, 0, 0, 19 },/* D29IP_E1P EHCI1 INTA -> PIRQD */ + /* EHCI #2 0:1a.0 */ + Package() { 0x001affff, 0, 0, 21 },/* D26IP_E2P EHCI2 INTA -> PIRQF */ + /* LPC devices 0:1f.0 */ + Package() { 0x001fffff, 0, 0, 17 }, /* D31IP_SIP SATA INTA -> PIRQB (MSI) */ + Package() { 0x001fffff, 1, 0, 23 }, /* D31IP_SMIP SMBUS INTB -> PIRQH */ + Package() { 0x001fffff, 2, 0, 16 }, /* D31IP_TTIP THRT INTC -> PIRQA */ + Package() { 0x001fffff, 3, 0, 18 }, + }) + } Else { + Return (Package() { + /* Onboard graphics (IGD) 0:2.0 */ + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + /* XHCI 0:14.0 (ivy only) */ + Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + /* High Definition Audio 0:1b.0 */ + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + /* PCIe Root Ports 0:1c.x */ + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 }, + /* EHCI #1 0:1d.0 */ + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + /* EHCI #2 0:1a.0 */ + Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, + /* LPC device 0:1f.0 */ + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, + }) + } +} diff --git a/src/southbridge/intel/bd82x6x/acpi/pch.asl b/src/southbridge/intel/bd82x6x/acpi/pch.asl index 27f08e24d5..73fcfcc21d 100644 --- a/src/southbridge/intel/bd82x6x/acpi/pch.asl +++ b/src/southbridge/intel/bd82x6x/acpi/pch.asl @@ -257,6 +257,8 @@ Scope(\) // SMBus 0:1f.3 #include "smbus.asl" +#include "irq.asl" + Method (_OSC, 4) { /* Check for XHCI */ diff --git a/src/southbridge/intel/bd82x6x/chip.h b/src/southbridge/intel/bd82x6x/chip.h index d4adfd5c9f..290bb058ac 100644 --- a/src/southbridge/intel/bd82x6x/chip.h +++ b/src/southbridge/intel/bd82x6x/chip.h @@ -22,19 +22,6 @@ struct southbridge_intel_bd82x6x_config { /** - * Interrupt Routing configuration - * If bit7 is 1, the interrupt is disabled. - */ - uint8_t pirqa_routing; - uint8_t pirqb_routing; - uint8_t pirqc_routing; - uint8_t pirqd_routing; - uint8_t pirqe_routing; - uint8_t pirqf_routing; - uint8_t pirqg_routing; - uint8_t pirqh_routing; - - /** * GPI Routing configuration * * Only the lower two bits have a meaning: diff --git a/src/southbridge/intel/bd82x6x/early_rcba.c b/src/southbridge/intel/bd82x6x/early_rcba.c new file mode 100644 index 0000000000..114b1749f2 --- /dev/null +++ b/src/southbridge/intel/bd82x6x/early_rcba.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include "pch.h" +#include "northbridge/intel/sandybridge/sandybridge.h" + +void +southbridge_configure_default_intmap(void) +{ + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP SLOT1 INTA -> PIRQB + * D28IP_P2IP SLOT2 INTB -> PIRQF + * D28IP_P3IP SLOT3 INTC -> PIRQD + * D28IP_P5IP SLOT5 INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + + */ + + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP) | (INTC << D28IP_P5IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); +} diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index 3c559462ee..11b765adc6 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -107,42 +107,37 @@ static void pch_enable_serial_irqs(struct device *dev) static void pch_pirq_init(device_t dev) { device_t irq_dev; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + /* Interrupt 11 is not used by legacy devices and so can always be used for + PCI interrupts. Full legacy IRQ routing is complicated and hard to + get right. Fortunately all modern OS use MSI and so it's not that big of + an issue anyway. Still we have to provide a reasonable default. Using + interrupt 11 for it everywhere is a working default. ACPI-aware OS can + move it to any interrupt and others will just leave them at default. + */ + const u8 pirq_routing = 11; - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + pci_write_config8(dev, PIRQA_ROUT, pirq_routing); + pci_write_config8(dev, PIRQB_ROUT, pirq_routing); + pci_write_config8(dev, PIRQC_ROUT, pirq_routing); + pci_write_config8(dev, PIRQD_ROUT, pirq_routing); - /* Eric Biederman once said we should let the OS do this. - * I am not so sure anymore he was right. - */ + pci_write_config8(dev, PIRQE_ROUT, pirq_routing); + pci_write_config8(dev, PIRQF_ROUT, pirq_routing); + pci_write_config8(dev, PIRQG_ROUT, pirq_routing); + pci_write_config8(dev, PIRQH_ROUT, pirq_routing); for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin=0, int_line=0; + u8 int_pin=0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - switch (int_pin) { - case 1: /* INTA# */ int_line = config->pirqa_routing; break; - case 2: /* INTB# */ int_line = config->pirqb_routing; break; - case 3: /* INTC# */ int_line = config->pirqc_routing; break; - case 4: /* INTD# */ int_line = config->pirqd_routing; break; - } - - if (!int_line) + if (int_pin == 0) continue; - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing); } } diff --git a/src/southbridge/intel/bd82x6x/madt.c b/src/southbridge/intel/bd82x6x/madt.c new file mode 100644 index 0000000000..45b652bd61 --- /dev/null +++ b/src/southbridge/intel/bd82x6x/madt.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h index 9b84c6706f..7cde7bc9c9 100644 --- a/src/southbridge/intel/bd82x6x/pch.h +++ b/src/southbridge/intel/bd82x6x/pch.h @@ -75,6 +75,7 @@ void enable_usb_bar(void); int smbus_read_byte(unsigned device, unsigned address); int early_spi_read(u32 offset, u32 size, u8 *buffer); void early_thermal_init(void); +void southbridge_configure_default_intmap(void); void early_pch_init_native(void); int southbridge_detect_s3_resume(void); diff --git a/src/southbridge/intel/ibexpeak/Makefile.inc b/src/southbridge/intel/ibexpeak/Makefile.inc index 2db758a056..cfcba5429d 100644 --- a/src/southbridge/intel/ibexpeak/Makefile.inc +++ b/src/southbridge/intel/ibexpeak/Makefile.inc @@ -43,6 +43,7 @@ ramstage-y += ../bd82x6x/watchdog.c ramstage-$(CONFIG_ELOG) += ../bd82x6x/elog.c ramstage-y += ../common/spi.c +ramstage-y += madt.c smm-$(CONFIG_SPI_FLASH_SMM) += ../common/spi.c ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c @@ -50,6 +51,7 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me.c ../bd82x6x/me_8.x.c ../bd82x romstage-y += ../bd82x6x/early_usb.c early_smbus.c ../bd82x6x/early_me.c ../bd82x6x/me_status.c ../bd82x6x/gpio.c early_thermal.c romstage-y += ../bd82x6x/reset.c +romstage-y += ../bd82x6x/early_rcba.c romstage-$(CONFIG_SOUTHBRIDGE_INTEL_BD82X6X) += ../bd82x6x/early_spi.c romstage-$(CONFIG_SOUTHBRIDGE_INTEL_C216) += ../bd82x6x/early_spi.c diff --git a/src/southbridge/intel/ibexpeak/lpc.c b/src/southbridge/intel/ibexpeak/lpc.c index 03b40495e1..212471136d 100644 --- a/src/southbridge/intel/ibexpeak/lpc.c +++ b/src/southbridge/intel/ibexpeak/lpc.c @@ -106,42 +106,37 @@ static void pch_enable_serial_irqs(struct device *dev) static void pch_pirq_init(device_t dev) { device_t irq_dev; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + /* Interrupt 11 is not used by legacy devices and so can always be used for + PCI interrupts. Full legacy IRQ routing is complicated and hard to + get right. Fortunately all modern OS use MSI and so it's not that big of + an issue anyway. Still we have to provide a reasonable default. Using + interrupt 11 for it everywhere is a working default. ACPI-aware OS can + move it to any interrupt and others will just leave them at default. + */ + const u8 pirq_routing = 11; - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + pci_write_config8(dev, PIRQA_ROUT, pirq_routing); + pci_write_config8(dev, PIRQB_ROUT, pirq_routing); + pci_write_config8(dev, PIRQC_ROUT, pirq_routing); + pci_write_config8(dev, PIRQD_ROUT, pirq_routing); - /* Eric Biederman once said we should let the OS do this. - * I am not so sure anymore he was right. - */ + pci_write_config8(dev, PIRQE_ROUT, pirq_routing); + pci_write_config8(dev, PIRQF_ROUT, pirq_routing); + pci_write_config8(dev, PIRQG_ROUT, pirq_routing); + pci_write_config8(dev, PIRQH_ROUT, pirq_routing); for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin=0, int_line=0; + u8 int_pin=0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - switch (int_pin) { - case 1: /* INTA# */ int_line = config->pirqa_routing; break; - case 2: /* INTB# */ int_line = config->pirqb_routing; break; - case 3: /* INTC# */ int_line = config->pirqc_routing; break; - case 4: /* INTD# */ int_line = config->pirqd_routing; break; - } - - if (!int_line) + if (int_pin == 0) continue; - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing); } } diff --git a/src/southbridge/intel/ibexpeak/madt.c b/src/southbridge/intel/ibexpeak/madt.c new file mode 100644 index 0000000000..69a7b4b65b --- /dev/null +++ b/src/southbridge/intel/ibexpeak/madt.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Vladimir Serbinenko <phcoder@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 1, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, + MP_IRQ_POLARITY_DEFAULT | + MP_IRQ_TRIGGER_DEFAULT); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_LEVEL); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 2, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 3, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + return current; +} diff --git a/src/southbridge/intel/ibexpeak/pch.h b/src/southbridge/intel/ibexpeak/pch.h index df125f052d..bd94689e78 100644 --- a/src/southbridge/intel/ibexpeak/pch.h +++ b/src/southbridge/intel/ibexpeak/pch.h @@ -79,6 +79,7 @@ int smbus_block_read(unsigned device, unsigned cmd, u8 bytes, u8 *buf); int smbus_block_write(unsigned device, unsigned cmd, u8 bytes, const u8 *buf); int early_spi_read(u32 offset, u32 size, u8 *buffer); void early_thermal_init(void); +void southbridge_configure_default_intmap(void); #endif #endif |