diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h | 2 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h | 414 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h | 166 |
3 files changed, 388 insertions, 194 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h index 364afedd14..feb2022204 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h @@ -1,6 +1,6 @@ /** @file -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h index 876c9d264c..d504f96db7 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h @@ -1,6 +1,6 @@ /** @file -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @@ -282,9 +282,10 @@ typedef struct { UINT8 UnusedUpdSpace1; /** Offset 0x00BE - DDR Frequency Limit - Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, - 2133, 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto + Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk, + i.e. divide by 133 or 100 + 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133, + 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto **/ UINT16 DdrFreqLimit; @@ -326,25 +327,9 @@ typedef struct { **/ UINT8 ScramblerSupport; -/** Offset 0x00C8 - EV Loader Test Content Pointer - Pointer to EV Loader Test Content in Memory -**/ - UINT32 EvTestContentPtr; - -/** Offset 0x00CC - EV Loader Test Content Size - Size of EV Loader Test Content in Memory +/** Offset 0x00C8 **/ - UINT32 EvTestContentSize; - -/** Offset 0x00D0 - EV Loader Test Config Pointer - Pointer to EV Loader Test Config in Memory -**/ - UINT32 EvTestConfigPtr; - -/** Offset 0x00D4 - EV Loader Test Config Size - Size of EV Loader Test Config in Memory -**/ - UINT32 EvTestConfigSize; + UINT8 UnusedUpdSpace2[16]; /** Offset 0x00D8 - SPD Profile Selected Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP @@ -491,7 +476,7 @@ typedef struct { /** Offset 0x00F6 **/ - UINT8 UnusedUpdSpace2[6]; + UINT8 UnusedUpdSpace3[6]; /** Offset 0x00FC - Enable Intel HD Audio (Azalia) 0: Disable, 1: Enable (Default) Azalia controller @@ -513,7 +498,7 @@ typedef struct { /** Offset 0x00FF **/ - UINT8 UnusedUpdSpace3; + UINT8 UnusedUpdSpace4; /** Offset 0x0100 - HECI1 BAR address BAR address of HECI1 @@ -684,7 +669,7 @@ typedef struct { /** Offset 0x0125 **/ - UINT8 UnusedUpdSpace4[3]; + UINT8 UnusedUpdSpace5[3]; /** Offset 0x0128 - DMI Gen3 Root port preset values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane @@ -708,7 +693,7 @@ typedef struct { /** Offset 0x0144 **/ - UINT8 UnusedUpdSpace5[4]; + UINT8 UnusedUpdSpace6[4]; /** Offset 0x0148 - PEG Gen3 RxCTLEp per-Bundle control Range: 0-15, 12 is default for each bundle, must be specified based upon platform design @@ -867,11 +852,37 @@ typedef struct { **/ UINT8 GtPsmiSupport; -/** Offset 0x01F4 - SaPreMemProductionRsvd +/** Offset 0x01F4 - GT unslice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtusVoltageMode; + +/** Offset 0x01F5 - voltage offset applied to GT unslice + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOffset; + +/** Offset 0x01F7 - GT unslice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOverride; + +/** Offset 0x01F9 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusExtraTurboVoltage; + +/** Offset 0x01FB - Maximum GTus turbo ratio override + 0(Default)=Minimal, 60=Maximum +**/ + UINT8 GtusMaxOcRatio; + +/** Offset 0x01FC - SaPreMemProductionRsvd Reserved for SA Pre-Mem Production $EN_DIS **/ - UINT8 SaPreMemProductionRsvd[12]; + UINT8 SaPreMemProductionRsvd[4]; /** Offset 0x0200 - BIST on Reset Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. @@ -919,7 +930,7 @@ typedef struct { /** Offset 0x0207 **/ - UINT8 UnusedUpdSpace6; + UINT8 UnusedUpdSpace7; /** Offset 0x0208 - Maximum clr turbo ratio override Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the @@ -1016,7 +1027,7 @@ typedef struct { /** Offset 0x021A - Ring Downbin Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.<b>0: Disable</b>; 1: Enable. + lower than the core ratio.0: Disable; <b>1: Enable.</b> $EN_DIS **/ UINT8 RingDownBin; @@ -1074,7 +1085,7 @@ typedef struct { /** Offset 0x0227 **/ - UINT8 UnusedUpdSpace7; + UINT8 UnusedUpdSpace8; /** Offset 0x0228 - PrmrrSize 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 @@ -1669,12 +1680,12 @@ typedef struct { UINT8 EnableOltm; /** Offset 0x04A2 - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + Enables/Disable DDR PowerDown and idle counter $EN_DIS **/ UINT8 EnablePwrDn; -/** Offset 0x04A3 - DDR PowerDown and idle counter +/** Offset 0x04A3 - DDR PowerDown and idle counter - LPDDR Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) $EN_DIS **/ @@ -1711,7 +1722,7 @@ typedef struct { **/ UINT8 SrefCfgEna; -/** Offset 0x04A9 - Throttler CKEMin Defeature +/** Offset 0x04A9 - Throttler CKEMin Defeature - LPDDR Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) $EN_DIS **/ @@ -1741,431 +1752,415 @@ typedef struct { **/ UINT8 DdrThermalSensor; -/** Offset 0x04AE - EV Loader - Enable/Disable EV Loader Functionality - $EN_DIS -**/ - UINT8 EvLoader; - -/** Offset 0x04AF - EV Loader Delay - Enable/Disable EV Loader 2 Second Delay - $EN_DIS -**/ - UINT8 EvLoaderDelay; - -/** Offset 0x04B0 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP +/** Offset 0x04AE - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP $EN_DIS **/ UINT8 Ddr4DdpSharedClock; -/** Offset 0x04B1 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP +/** Offset 0x04AF - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP $EN_DIS **/ UINT8 Ddr4DdpSharedZq; -/** Offset 0x04B2 - Ch Hash Mask +/** Offset 0x04B0 - Ch Hash Mask Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to BITS [19:6 **/ UINT16 ChHashMask; -/** Offset 0x04B4 - Base reference clock value +/** Offset 0x04B2 - Base reference clock value Base reference clock value, in Hertz(Default is 125Hz) 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz **/ UINT32 BClkFrequency; -/** Offset 0x04B8 - Ch Hash Interleaved Bit +/** Offset 0x04B6 - Ch Hash Interleaved Bit Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 **/ UINT8 ChHashInterleaveBit; -/** Offset 0x04B9 - Energy Scale Factor +/** Offset 0x04B7 - Energy Scale Factor Energy Scale Factor, Default is 4 **/ UINT8 EnergyScaleFact; -/** Offset 0x04BA - EPG DIMM Idd3N +/** Offset 0x04B8 - EPG DIMM Idd3N Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on a per DIMM basis. Default is 26 **/ UINT16 Idd3n; -/** Offset 0x04BC - EPG DIMM Idd3P +/** Offset 0x04BA - EPG DIMM Idd3P Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated on a per DIMM basis. Default is 11 **/ UINT16 Idd3p; -/** Offset 0x04BE - CMD Slew Rate Training +/** Offset 0x04BC - CMD Slew Rate Training Enable/Disable CMD Slew Rate Training $EN_DIS **/ UINT8 CMDSR; -/** Offset 0x04BF - CMD Drive Strength and Tx Equalization +/** Offset 0x04BD - CMD Drive Strength and Tx Equalization Enable/Disable CMD Drive Strength and Tx Equalization $EN_DIS **/ UINT8 CMDDSEQ; -/** Offset 0x04C0 - CMD Normalization +/** Offset 0x04BE - CMD Normalization Enable/Disable CMD Normalization $EN_DIS **/ UINT8 CMDNORM; -/** Offset 0x04C1 - Early DQ Write Drive Strength and Equalization Training +/** Offset 0x04BF - Early DQ Write Drive Strength and Equalization Training Enable/Disable Early DQ Write Drive Strength and Equalization Training $EN_DIS **/ UINT8 EWRDSEQ; -/** Offset 0x04C2 - RH Activation Probability +/** Offset 0x04C0 - RH Activation Probability RH Activation Probability, Probability value is 1/2^(inputvalue) **/ UINT8 RhActProbability; -/** Offset 0x04C3 - RAPL PL 2 WindowX +/** Offset 0x04C1 - RAPL PL 2 WindowX Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) **/ UINT8 RaplLim2WindX; -/** Offset 0x04C4 - RAPL PL 2 WindowY +/** Offset 0x04C2 - RAPL PL 2 WindowY Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) **/ UINT8 RaplLim2WindY; -/** Offset 0x04C5 - RAPL PL 1 WindowX +/** Offset 0x04C3 - RAPL PL 1 WindowX Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) **/ UINT8 RaplLim1WindX; -/** Offset 0x04C6 - RAPL PL 1 WindowY +/** Offset 0x04C4 - RAPL PL 1 WindowY Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) **/ UINT8 RaplLim1WindY; -/** Offset 0x04C7 -**/ - UINT8 UnusedUpdSpace8; - -/** Offset 0x04C8 - RAPL PL 2 Power +/** Offset 0x04C5 - RAPL PL 2 Power range[0;2^14-1]= [2047.875;0]in W, (224= Def) **/ UINT16 RaplLim2Pwr; -/** Offset 0x04CA - RAPL PL 1 Power +/** Offset 0x04C7 - RAPL PL 1 Power range[0;2^14-1]= [2047.875;0]in W, (224= Def) **/ UINT16 RaplLim1Pwr; -/** Offset 0x04CC - Warm Threshold Ch0 Dimm0 +/** Offset 0x04C9 - Warm Threshold Ch0 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 WarmThresholdCh0Dimm0; -/** Offset 0x04CD - Warm Threshold Ch0 Dimm1 +/** Offset 0x04CA - Warm Threshold Ch0 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 WarmThresholdCh0Dimm1; -/** Offset 0x04CE - Warm Threshold Ch1 Dimm0 +/** Offset 0x04CB - Warm Threshold Ch1 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 WarmThresholdCh1Dimm0; -/** Offset 0x04CF - Warm Threshold Ch1 Dimm1 +/** Offset 0x04CC - Warm Threshold Ch1 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 WarmThresholdCh1Dimm1; -/** Offset 0x04D0 - Hot Threshold Ch0 Dimm0 +/** Offset 0x04CD - Hot Threshold Ch0 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 HotThresholdCh0Dimm0; -/** Offset 0x04D1 - Hot Threshold Ch0 Dimm1 +/** Offset 0x04CE - Hot Threshold Ch0 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 HotThresholdCh0Dimm1; -/** Offset 0x04D2 - Hot Threshold Ch1 Dimm0 +/** Offset 0x04CF - Hot Threshold Ch1 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 HotThresholdCh1Dimm0; -/** Offset 0x04D3 - Hot Threshold Ch1 Dimm1 +/** Offset 0x04D0 - Hot Threshold Ch1 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 **/ UINT8 HotThresholdCh1Dimm1; -/** Offset 0x04D4 - Warm Budget Ch0 Dimm0 +/** Offset 0x04D1 - Warm Budget Ch0 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 WarmBudgetCh0Dimm0; -/** Offset 0x04D5 - Warm Budget Ch0 Dimm1 +/** Offset 0x04D2 - Warm Budget Ch0 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 WarmBudgetCh0Dimm1; -/** Offset 0x04D6 - Warm Budget Ch1 Dimm0 +/** Offset 0x04D3 - Warm Budget Ch1 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 WarmBudgetCh1Dimm0; -/** Offset 0x04D7 - Warm Budget Ch1 Dimm1 +/** Offset 0x04D4 - Warm Budget Ch1 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 WarmBudgetCh1Dimm1; -/** Offset 0x04D8 - Hot Budget Ch0 Dimm0 +/** Offset 0x04D5 - Hot Budget Ch0 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 HotBudgetCh0Dimm0; -/** Offset 0x04D9 - Hot Budget Ch0 Dimm1 +/** Offset 0x04D6 - Hot Budget Ch0 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 HotBudgetCh0Dimm1; -/** Offset 0x04DA - Hot Budget Ch1 Dimm0 +/** Offset 0x04D7 - Hot Budget Ch1 Dimm0 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 HotBudgetCh1Dimm0; -/** Offset 0x04DB - Hot Budget Ch1 Dimm1 +/** Offset 0x04D8 - Hot Budget Ch1 Dimm1 range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM **/ UINT8 HotBudgetCh1Dimm1; -/** Offset 0x04DC - Idle Energy Ch0Dimm0 +/** Offset 0x04D9 - Idle Energy Ch0Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyCh0Dimm0; -/** Offset 0x04DD - Idle Energy Ch0Dimm1 +/** Offset 0x04DA - Idle Energy Ch0Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyCh0Dimm1; -/** Offset 0x04DE - Idle Energy Ch1Dimm0 +/** Offset 0x04DB - Idle Energy Ch1Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyCh1Dimm0; -/** Offset 0x04DF - Idle Energy Ch1Dimm1 +/** Offset 0x04DC - Idle Energy Ch1Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyCh1Dimm1; -/** Offset 0x04E0 - PowerDown Energy Ch0Dimm0 +/** Offset 0x04DD - PowerDown Energy Ch0Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) **/ UINT8 PdEnergyCh0Dimm0; -/** Offset 0x04E1 - PowerDown Energy Ch0Dimm1 +/** Offset 0x04DE - PowerDown Energy Ch0Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) **/ UINT8 PdEnergyCh0Dimm1; -/** Offset 0x04E2 - PowerDown Energy Ch1Dimm0 +/** Offset 0x04DF - PowerDown Energy Ch1Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) **/ UINT8 PdEnergyCh1Dimm0; -/** Offset 0x04E3 - PowerDown Energy Ch1Dimm1 +/** Offset 0x04E0 - PowerDown Energy Ch1Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) **/ UINT8 PdEnergyCh1Dimm1; -/** Offset 0x04E4 - Activate Energy Ch0Dimm0 +/** Offset 0x04E1 - Activate Energy Ch0Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyCh0Dimm0; -/** Offset 0x04E5 - Activate Energy Ch0Dimm1 +/** Offset 0x04E2 - Activate Energy Ch0Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyCh0Dimm1; -/** Offset 0x04E6 - Activate Energy Ch1Dimm0 +/** Offset 0x04E3 - Activate Energy Ch1Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyCh1Dimm0; -/** Offset 0x04E7 - Activate Energy Ch1Dimm1 +/** Offset 0x04E4 - Activate Energy Ch1Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyCh1Dimm1; -/** Offset 0x04E8 - Read Energy Ch0Dimm0 +/** Offset 0x04E5 - Read Energy Ch0Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyCh0Dimm0; -/** Offset 0x04E9 - Read Energy Ch0Dimm1 +/** Offset 0x04E6 - Read Energy Ch0Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyCh0Dimm1; -/** Offset 0x04EA - Read Energy Ch1Dimm0 +/** Offset 0x04E7 - Read Energy Ch1Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyCh1Dimm0; -/** Offset 0x04EB - Read Energy Ch1Dimm1 +/** Offset 0x04E8 - Read Energy Ch1Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyCh1Dimm1; -/** Offset 0x04EC - Write Energy Ch0Dimm0 +/** Offset 0x04E9 - Write Energy Ch0Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyCh0Dimm0; -/** Offset 0x04ED - Write Energy Ch0Dimm1 +/** Offset 0x04EA - Write Energy Ch0Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyCh0Dimm1; -/** Offset 0x04EE - Write Energy Ch1Dimm0 +/** Offset 0x04EB - Write Energy Ch1Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyCh1Dimm0; -/** Offset 0x04EF - Write Energy Ch1Dimm1 +/** Offset 0x04EC - Write Energy Ch1Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyCh1Dimm1; -/** Offset 0x04F0 - Throttler CKEMin Timer +/** Offset 0x04ED - Throttler CKEMin Timer Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). Dfault is 0x30 **/ UINT8 ThrtCkeMinTmr; -/** Offset 0x04F1 - Cke Rank Mapping +/** Offset 0x04EE - Cke Rank Mapping Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies which rank CKE[i] goes to. **/ UINT8 CkeRankMapping; -/** Offset 0x04F2 - Rapl Power Floor Ch0 +/** Offset 0x04EF - Rapl Power Floor Ch0 Power budget ,range[255;0],(0= 5.3W Def) **/ UINT8 RaplPwrFlCh0; -/** Offset 0x04F3 - Rapl Power Floor Ch1 +/** Offset 0x04F0 - Rapl Power Floor Ch1 Power budget ,range[255;0],(0= 5.3W Def) **/ UINT8 RaplPwrFlCh1; -/** Offset 0x04F4 - Command Rate Support +/** Offset 0x04F1 - Command Rate Support CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs - 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS + 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS **/ UINT8 EnCmdRate; -/** Offset 0x04F5 - REFRESH_2X_MODE +/** Offset 0x04F2 - REFRESH_2X_MODE 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only **/ UINT8 Refresh2X; -/** Offset 0x04F6 - Energy Performance Gain +/** Offset 0x04F3 - Energy Performance Gain Enable/disable(default) Energy Performance Gain. $EN_DIS **/ UINT8 EpgEnable; -/** Offset 0x04F7 - Row Hammer Solution +/** Offset 0x04F4 - Row Hammer Solution Type of method used to prevent Row Hammer. Default is Hardware RHP 0:Hardware RHP, 1:2x Refresh **/ UINT8 RhSolution; -/** Offset 0x04F8 - User Manual Threshold +/** Offset 0x04F5 - User Manual Threshold Disabled: Predefined threshold will be used.\n Enabled: User Input will be used. $EN_DIS **/ UINT8 UserThresholdEnable; -/** Offset 0x04F9 - User Manual Budget +/** Offset 0x04F6 - User Manual Budget Disabled: Configuration of memories will defined the Budget value.\n Enabled: User Input will be used. $EN_DIS **/ UINT8 UserBudgetEnable; -/** Offset 0x04FA - TcritMax +/** Offset 0x04F7 - TcritMax Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax has to be greater than THIGHMax .\n Critical temperature will be TcritMax **/ UINT8 TsodTcritMax; -/** Offset 0x04FB - Event mode +/** Offset 0x04F8 - Event mode Disable:Comparator mode.\n Enable:Interrupt mode $EN_DIS **/ UINT8 TsodEventMode; -/** Offset 0x04FC - EVENT polarity +/** Offset 0x04F9 - EVENT polarity Disable:Active LOW.\n Enable:Active HIGH $EN_DIS **/ UINT8 TsodEventPolarity; -/** Offset 0x04FD - Critical event only +/** Offset 0x04FA - Critical event only Disable:Trips on alarm or critical.\n Enable:Trips only if criticaal temperature is reached $EN_DIS **/ UINT8 TsodCriticalEventOnly; -/** Offset 0x04FE - Event output control +/** Offset 0x04FB - Event output control Disable:Event output disable.\n Enable:Event output enabled $EN_DIS **/ UINT8 TsodEventOutputControl; -/** Offset 0x04FF - Alarm window lock bit +/** Offset 0x04FC - Alarm window lock bit Disable:Alarm trips are not locked and can be changed.\n Enable:Alarm trips are locked and cannot be changed $EN_DIS **/ UINT8 TsodAlarmwindowLockBit; -/** Offset 0x0500 - Critical trip lock bit +/** Offset 0x04FD - Critical trip lock bit Disable:Critical trip is not locked and can be changed.\n Enable:Critical trip is locked and cannot be changed $EN_DIS **/ UINT8 TsodCriticaltripLockBit; -/** Offset 0x0501 - Shutdown mode +/** Offset 0x04FE - Shutdown mode Disable:Temperature sensor enable.\n Enable:Temperature sensor disable $EN_DIS **/ UINT8 TsodShutdownMode; -/** Offset 0x0502 - ThighMax +/** Offset 0x04FF - ThighMax Thigh = ThighMax (Default is 93) **/ UINT8 TsodThigMax; -/** Offset 0x0503 - User Manual Thig and Tcrit +/** Offset 0x0500 - User Manual Thig and Tcrit Disabled(Default): Temperature will be given by the configuration of memories and 1x or 2xrefresh rate.\n Enabled: User Input will define for Thigh and Tcrit. @@ -2173,32 +2168,32 @@ typedef struct { **/ UINT8 TsodManualEnable; -/** Offset 0x0504 - Force OLTM or 2X Refresh when needed +/** Offset 0x0501 - Force OLTM or 2X Refresh when needed Disabled(Default): = Force OLTM.\n Enabled: = Force 2x Refresh. $EN_DIS **/ UINT8 ForceOltmOrRefresh2x; -/** Offset 0x0505 - Pwr Down Idle Timer +/** Offset 0x0502 - Pwr Down Idle Timer The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means AUTO: 64 for ULX/ULT, 128 for DT/Halo **/ UINT8 PwdwnIdleCounter; -/** Offset 0x0506 - Bitmask of ranks that have CA bus terminated +/** Offset 0x0503 - Bitmask of ranks that have CA bus terminated Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, Rank0 is terminating and Rank1 is non-terminating</b> **/ UINT8 CmdRanksTerminated; -/** Offset 0x0507 - GDXC MOT enable +/** Offset 0x0504 - GDXC MOT enable GDXC MOT enable. $EN_DIS **/ UINT8 GdxcEnable; -/** Offset 0x0508 - PcdSerialDebugLevel +/** Offset 0x0505 - PcdSerialDebugLevel Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, Info & Verbose. @@ -2207,55 +2202,71 @@ typedef struct { **/ UINT8 PcdSerialDebugLevel; -/** Offset 0x0509 - Fivr Faults +/** Offset 0x0506 - Fivr Faults Fivr Faults; 0: Disabled; <b>1: Enabled.</b> $EN_DIS **/ UINT8 FivrFaults; -/** Offset 0x050A - Fivr Efficiency +/** Offset 0x0507 - Fivr Efficiency Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> $EN_DIS **/ UINT8 FivrEfficiency; -/** Offset 0x050B - Safe Mode Support +/** Offset 0x0508 - Safe Mode Support This option configures the varous items in the IO and MC to be more conservative.(def=Disable) $EN_DIS **/ UINT8 SafeMode; -/** Offset 0x050C - Ask MRC to clear memory content +/** Offset 0x0509 - Ask MRC to clear memory content Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. $EN_DIS **/ UINT8 CleanMemory; -/** Offset 0x050D - LpDdrDqDqsReTraining +/** Offset 0x050A - LpDdrDqDqsReTraining Enables/Disable LpDdrDqDqsReTraining $EN_DIS **/ UINT8 LpDdrDqDqsReTraining; -/** Offset 0x050E - Post Code Output Port +/** Offset 0x050B - Post Code Output Port This option configures Post Code Output Port **/ UINT16 PostCodeOutputPort; -/** Offset 0x0510 - RMTLoopCount +/** Offset 0x050D - RMTLoopCount Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO **/ UINT8 RMTLoopCount; -/** Offset 0x0511 - BER Support +/** Offset 0x050E - BER Support Enable/Disable the Rank Margin Tool interpolation/extrapolation. 0:Disable, 1:Enable **/ UINT8 EnBER; -/** Offset 0x0512 +/** Offset 0x050F - PEG IMR support + This option configures the IMR support for PEG.(def=Disable) + $EN_DIS +**/ + UINT8 PegImrEnable; + +/** Offset 0x0510 - PEG IMR size + The size of IMR to be allocated for PEG EndPoint device **/ - UINT8 ReservedFspmUpd[14]; + UINT16 PegImrSize; + +/** Offset 0x0512 - PEG Root Port Selection + The Root Port for which the IMR to be allocated +**/ + UINT8 PegImrRpSelection; + +/** Offset 0x0513 +**/ + UINT8 ReservedFspmUpd[12]; } FSP_M_CONFIG; /** Fsp M Test Configuration @@ -2480,7 +2491,7 @@ typedef struct { /** Offset 0x0579 **/ - UINT8 UnusedUpdSpace9; + UINT8 UnusedUpdSpace10; /** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 1000. @warning Do not change from the default @@ -2619,9 +2630,116 @@ typedef struct { **/ UINT8 KtDeviceEnable; -/** Offset 0x05A5 +/** Offset 0x05A5 - tRd2RdSG + Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54. **/ - UINT8 ReservedFspmTestUpd[11]; + UINT8 tRd2RdSG; + +/** Offset 0x05A6 - tRd2RdDG + Delay between Read-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDG; + +/** Offset 0x05A7 - tRd2RdDR + Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDR; + +/** Offset 0x05A8 - tRd2RdDD + Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDD; + +/** Offset 0x05A9 - tWr2RdSG + Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86. +**/ + UINT8 tWr2RdSG; + +/** Offset 0x05AA - tWr2RdDG + Delay between Write-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDG; + +/** Offset 0x05AB - tWr2RdDR + Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDR; + +/** Offset 0x05AC - tWr2RdDD + Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDD; + +/** Offset 0x05AD - tWr2WrSG + Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrSG; + +/** Offset 0x05AE - tWr2WrDG + Delay between Write-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDG; + +/** Offset 0x05AF - tWr2WrDR + Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDR; + +/** Offset 0x05B0 - tWr2WrDD + Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDD; + +/** Offset 0x05B1 - tRd2WrSG + Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrSG; + +/** Offset 0x05B2 - tRd2WrDG + Delay between Read-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDG; + +/** Offset 0x05B3 - tRd2WrDR + Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDR; + +/** Offset 0x05B4 - tRd2WrDD + Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDD; + +/** Offset 0x05B5 - tRRD_L + Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31 +**/ + UINT8 tRRD_L; + +/** Offset 0x05B6 - tRRD_S + Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0: + AUTO, max: 31 +**/ + UINT8 tRRD_S; + +/** Offset 0x05B7 - tWTR_L + Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0: + AUTO, max: 60 +**/ + UINT8 tWTR_L; + +/** Offset 0x05B8 - tWTR_S + Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only. + 0: AUTO, max: 28 +**/ + UINT8 tWTR_S; + +/** Offset 0x05B9 +**/ + UINT8 ReservedFspmTestUpd[3]; } FSP_M_TEST_CONFIG; /** Fsp M UPD Configuration @@ -2640,13 +2758,17 @@ typedef struct { **/ FSP_M_CONFIG FspmConfig; +/** Offset 0x051F +**/ + UINT8 UnusedUpdSpace9; + /** Offset 0x0520 **/ FSP_M_TEST_CONFIG FspmTestConfig; -/** Offset 0x05B0 +/** Offset 0x05BC **/ - UINT16 UpdTerminator; + UINT32 UpdTerminator; } FSPM_UPD; #pragma pack() diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h index 17b9f92b4e..0285dd1bf7 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h @@ -1,6 +1,6 @@ /** @file -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @@ -470,9 +470,18 @@ typedef struct { **/ UINT8 PchCnviMode; -/** Offset 0x0147 +/** Offset 0x0147 - SdCard power enable polarity + Choose SD_PWREN# polarity + 0: Active low, 1: Active high **/ - UINT8 UnusedUpdSpace3[2]; + UINT8 SdCardPowerEnableActiveHigh; + +/** Offset 0x0148 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PchUsb2PhySusPgEnable; /** Offset 0x0149 - PCH USB OverCurrent mapping enable 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin @@ -483,7 +492,7 @@ typedef struct { /** Offset 0x014A **/ - UINT8 UnusedUpdSpace4; + UINT8 UnusedUpdSpace3; /** Offset 0x014B - CNVi MfUart1 Type This option configures Uart type which connects to MfUart1 @@ -506,7 +515,7 @@ typedef struct { /** Offset 0x014E **/ - UINT8 UnusedUpdSpace5; + UINT8 UnusedUpdSpace4; /** Offset 0x014F - PCHHOT# pin Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable @@ -594,9 +603,27 @@ typedef struct { **/ UINT16 WatchDogTimerBios; -/** Offset 0x015F +/** Offset 0x015F - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx + $EN_DIS **/ - UINT8 UnusedUpdSpace6[4]; + UINT8 RemoteAssistance; + +/** Offset 0x0160 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x0161 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x0162 +**/ + UINT8 UnusedUpdSpace5[1]; /** Offset 0x0163 - PCH PCIe root port connection type 0: built-in device, 1:slot @@ -604,7 +631,8 @@ typedef struct { UINT8 PcieRpSlotImplemented[24]; /** Offset 0x017B - Usage type for ClkSrc - 0-23: PCH rootport, 0x40: LAN, 0x80: unspecified but in use, 0xFF: not used + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used **/ UINT8 PcieClkSrcUsage[16]; @@ -631,9 +659,22 @@ typedef struct { **/ UINT16 PcieRpDetectTimeoutMs[24]; -/** Offset 0x01FB +/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS **/ - UINT8 UnusedUpdSpace7[5]; + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x01FC - SlpS0WithGbeSupport + Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SlpS0WithGbeSupport; + +/** Offset 0x01FD +**/ + UINT8 UnusedUpdSpace6[3]; /** Offset 0x0200 - Enable/Disable SA CRID Enable: SA CRID, Disable (Default): SA CRID @@ -642,8 +683,8 @@ typedef struct { UINT8 CridEnable; /** Offset 0x0201 - DMI ASPM - 0=Disable, 3(Default)=L0sL1 - 0:Disable, 3:L0sL1 + 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 + 0:Disable, 1:L0s, 2:L1, 3:L0sL1 **/ UINT8 DmiAspm; @@ -689,7 +730,7 @@ typedef struct { /** Offset 0x0219 **/ - UINT8 UnusedUpdSpace8; + UINT8 UnusedUpdSpace7; /** Offset 0x021A - Enable or disable GNA device 0=Disable, 1(Default)=Enable @@ -698,7 +739,7 @@ typedef struct { UINT8 GnaEnable; /** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1(Default)=Enable/Set + 0=Disable/Clear, 1=Enable/Set $EN_DIS **/ UINT8 X2ApicOptOut; @@ -762,11 +803,36 @@ typedef struct { **/ UINT8 DdiPortFDdc; -/** Offset 0x0231 - SaPostMemProductionRsvd +/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock in S3 resume due to GOP absent + $EN_DIS +**/ + UINT8 SkipS3CdClockInit; + +/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms + Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate + T12 Delay to max 500ms + 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay +**/ + UINT16 DeltaT12PowerCycleDelay; + +/** Offset 0x0234 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x0238 - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x023C - SaPostMemProductionRsvd Reserved for SA Post-Mem Production $EN_DIS **/ - UINT8 SaPostMemProductionRsvd[46]; + UINT8 SaPostMemProductionRsvd[35]; /** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for @@ -888,7 +954,7 @@ typedef struct { /** Offset 0x02BB **/ - UINT8 UnusedUpdSpace9[10]; + UINT8 UnusedUpdSpace8[10]; /** Offset 0x02C5 - DcLoadline PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is @@ -956,7 +1022,7 @@ typedef struct { /** Offset 0x0306 **/ - UINT8 UnusedUpdSpace10[6]; + UINT8 UnusedUpdSpace9[6]; /** Offset 0x030C - Skip Multi-Processor Initialization When this is skipped, boot loader must initialize processors before SilicionInit @@ -1021,18 +1087,24 @@ typedef struct { **/ UINT8 IslVrCmd; -/** Offset 0x031A - ReservedCpuPostMemProduction +/** Offset 0x031A - Imon slope1 correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes +**/ + UINT16 ImonSlope1[5]; + +/** Offset 0x0324 - ReservedCpuPostMemProduction Reserved for CPU Post-Mem Production $EN_DIS **/ - UINT8 ReservedCpuPostMemProduction[17]; + UINT8 ReservedCpuPostMemProduction[1]; -/** Offset 0x032B +/** Offset 0x0325 **/ - UINT8 UnusedUpdSpace11[27]; + UINT8 UnusedUpdSpace10[33]; /** Offset 0x0346 - Enable DMI ASPM - ASPM on PCH side of the DMI Link. + Deprecated. $EN_DIS **/ UINT8 PchDmiAspm; @@ -1072,7 +1144,7 @@ typedef struct { /** Offset 0x0367 **/ - UINT8 UnusedUpdSpace12; + UINT8 UnusedUpdSpace11; /** Offset 0x0368 - VC Type Virtual Channel Type Select: 0: VC0, 1: VC1. @@ -1113,7 +1185,7 @@ typedef struct { /** Offset 0x036E **/ - UINT8 UnusedUpdSpace13[15]; + UINT8 UnusedUpdSpace12[15]; /** Offset 0x037D - Enable PCH Io Apic Entry 24-119 0: Disable; 1: Enable. @@ -1128,7 +1200,7 @@ typedef struct { /** Offset 0x037F **/ - UINT8 UnusedUpdSpace14; + UINT8 UnusedUpdSpace13; /** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned 0: Disable; 1: Enable. @@ -1228,7 +1300,7 @@ typedef struct { /** Offset 0x0390 **/ - UINT8 UnusedUpdSpace15[3]; + UINT8 UnusedUpdSpace14[3]; /** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region @@ -1320,10 +1392,9 @@ typedef struct { **/ UINT8 PcieRpMaxPayload[24]; -/** Offset 0x04E6 - PCIE RP Device Reset Pad Active High - Indicated whether PERST# is active 0: Low; 1: High, See: DeviceResetPad. +/** Offset 0x04E6 **/ - UINT8 PcieRpDeviceResetPadActiveHigh[24]; + UINT8 UnusedUpdSpace15[24]; /** Offset 0x04FE - PCIE RP Pcie Speed Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: @@ -1332,8 +1403,8 @@ typedef struct { UINT8 PcieRpPcieSpeed[24]; /** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method - PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: Default; 2: Software Search; - 4: Fixed Coeficients. + PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. **/ UINT8 PcieRpGen3EqPh3Method[24]; @@ -1347,15 +1418,9 @@ typedef struct { **/ UINT8 PcieRpCompletionTimeout[24]; -/** Offset 0x055E - PCIE RP Device Reset Pad - The PCH pin assigned to device PERST# signal if available, zero otherwise. See - also DeviceResetPadActiveHigh. +/** Offset 0x055E **/ - UINT32 PcieRpDeviceResetPad[24]; - -/** Offset 0x05BE -**/ - UINT8 UnusedUpdSpace16[10]; + UINT8 UnusedUpdSpace16[106]; /** Offset 0x05C8 - PCIE RP Aspm The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is @@ -1550,6 +1615,7 @@ typedef struct { /** Offset 0x0680 - PCH Pm Lpc Clock Run This member describes whether or not the LPC ClockRun feature of PCH should be enabled. + Default value is Disabled $EN_DIS **/ UINT8 PchPmLpcClockRun; @@ -1771,7 +1837,7 @@ typedef struct { UINT8 SataRstPcieDeviceResetDelay[3]; /** Offset 0x06F5 - Enable eMMC HS400 Training - Determine if HS400 Training is required. + Deprecated. $EN_DIS **/ UINT8 PchScsEmmcHs400TuningRequired; @@ -1793,7 +1859,7 @@ typedef struct { UINT8 PchScsEmmcHs400TxDataDll; /** Offset 0x06F9 - I/O Driver Strength - I/O driver strength: 0 - 33 Ohm, 1 - 40 Ohm, 2 - 50 Ohm. + Deprecated. 0:33 Ohm, 1:40 Ohm, 2:50 Ohm **/ UINT8 PchScsEmmcHs400DriverStrength; @@ -2192,9 +2258,15 @@ typedef struct { **/ UINT8 PmcCpuC10GatePinEnable; -/** Offset 0x07AB +/** Offset 0x07AB - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x07AC **/ - UINT8 ReservedFspsUpd[2]; + UINT8 ReservedFspsUpd[1]; } FSP_S_CONFIG; /** Fsp S Test Configuration @@ -2634,13 +2706,13 @@ typedef struct { UINT8 C1e; /** Offset 0x080D - Enable or Disable Package Cstate Demotion - Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b> + Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 PkgCStateDemotion; /** Offset 0x080E - Enable or Disable Package Cstate UnDemotion - Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b> + Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 PkgCStateUnDemotion; @@ -3111,7 +3183,7 @@ typedef struct { UINT8 UnusedUpdSpace26[17]; /** Offset 0x0A72 - Skip POSTBOOT SAI - This skip the Post Boot Sai programming. 0: Set Post Boot Sai; 1: Skip Post Boot Sai. + Deprecated $EN_DIS **/ UINT8 SkipPostBootSai; |