diff options
Diffstat (limited to 'src')
30 files changed, 1416 insertions, 1443 deletions
diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb index b5ab0cd37a..29ab5bb8e3 100644 --- a/src/mainboard/nvidia/l1_2pvv/Config.lb +++ b/src/mainboard/nvidia/l1_2pvv/Config.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## ## ## Compute the location and size of where this firmware image @@ -40,7 +40,7 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## @@ -67,7 +67,7 @@ else end end -arch i386 end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -82,48 +82,48 @@ if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if HAVE_ACPI_TABLES - object acpi_tables.o - object fadt.o + object acpi_tables.o + object fadt.o makerule dsdt.c depends "$(MAINBOARD)/dx/dsdt_lb.dsl" action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl" action "mv dsdt_lb.hex dsdt.c" end - object ./dsdt.o + object ./dsdt.o #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb - - if ACPI_SSDTX_NUM - makerule ssdt6.c - depends "$(MAINBOARD)/dx/pci6.asl" - action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci6.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex" - action "mv pci6.hex ssdt6.c" - end - object ./ssdt6.o - makerule ssdt5.c - depends "$(MAINBOARD)/dx/pci5.asl" - action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci5.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex" - action "mv pci5.hex ssdt5.c" - end - object ./ssdt5.o - end + + if ACPI_SSDTX_NUM + makerule ssdt6.c + depends "$(MAINBOARD)/dx/pci6.asl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci6.asl" + action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex" + action "mv pci6.hex ssdt6.c" + end + object ./ssdt6.o + makerule ssdt5.c + depends "$(MAINBOARD)/dx/pci5.asl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci5.asl" + action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex" + action "mv pci5.hex ssdt5.c" + end + object ./ssdt5.o + end end if USE_DCACHE_RAM - if CONFIG_USE_INIT + if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" end else makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" end end @@ -132,11 +132,11 @@ end if USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb end end @@ -159,13 +159,13 @@ end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end end @@ -173,20 +173,20 @@ end ## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end end @@ -200,12 +200,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ROMSTRAP table for MCP55 ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE + if USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -219,7 +219,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### @@ -250,187 +250,187 @@ if USE_DCACHE_RAM end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME config chip.h end chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 device pci 0.0 on end # HT - device pci 1.0 on # LPC + device pci 1.0 on # LPC chip superio/winbond/w83627ehg device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 + device pnp 2e.6 off # SFI + io 0x62 = 0x100 end - device pnp 2e.7 off # GPIO_GAME_MIDI + device pnp 2e.7 off # GPIO_GAME_MIDI io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor io 0x60 = 0x290 irq 0x70 = 5 - end + end end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end end # SM - device pci 1.1 on # SM 1 + device pci 1.1 on # SM 1 #PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # Link 1 device pci 18.0 on - # devices on link 2, link 2 == LDT 2 - chip southbridge/nvidia/mcp55 + # devices on link 2, link 2 == LDT 2 + chip southbridge/nvidia/mcp55 device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 on end # SM 0 - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 off end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + device pci 1.0 on end # LPC + device pci 1.1 on end # SM 0 + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 off end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" - end + end end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # mc0 - + end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 on end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 off end # io -# end + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end end #root_complex diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb index 7830dc7104..8159fcc6d8 100644 --- a/src/mainboard/nvidia/l1_2pvv/Options.lb +++ b/src/mainboard/nvidia/l1_2pvv/Options.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -195,7 +195,7 @@ default LIFT_BSP_APIC_ID=1 #CHIP_NAME ? default CONFIG_CHIP_NAME=1 -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G #default HW_MEM_HOLE_SIZEK=0x200000 #1G @@ -292,7 +292,7 @@ default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file -### +### ## ## The default compiler @@ -302,7 +302,7 @@ default HOSTCC="gcc" ## ## Disable the gdb stub by default -## +## default CONFIG_GDB_STUB=0 ## @@ -333,15 +333,15 @@ default TTYS0_LCS=0x3 ## ### Select the coreboot loglevel ## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details ## Request this level of debugging output default DEFAULT_CONSOLE_LOGLEVEL=8 diff --git a/src/mainboard/nvidia/l1_2pvv/apc_auto.c b/src/mainboard/nvidia/l1_2pvv/apc_auto.c index 7c09ae4818..91c3b5e187 100644 --- a/src/mainboard/nvidia/l1_2pvv/apc_auto.c +++ b/src/mainboard/nvidia/l1_2pvv/apc_auto.c @@ -25,7 +25,7 @@ #define RAMINIT_SYSINFO 1 #define CACHE_AS_RAM_ADDRESS_DEBUG 0 -#define SET_NB_CFG_54 1 +#define SET_NB_CFG_54 1 //used by raminit #define QRANK_DIMM_SUPPORT 1 @@ -44,18 +44,18 @@ #include "pc80/serial.c" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "arch/i386/lib/console.c" -#if 0 +#if 0 static void post_code(uint8_t value) { #if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } #endif } #endif @@ -87,14 +87,14 @@ static void post_code(uint8_t value) { void hardwaremain(int ret_addr) { struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; id = get_node_core_id_x(); //FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP - print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); train_ram(id.nodeid, sysinfo, sysinfox); @@ -102,29 +102,29 @@ void hardwaremain(int ret_addr) go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp */ - __asm__ volatile ( - "movl %0, %%edi\n\t" - "jmp *%%edi\n\t" - :: "a"(ret_addr) - ); + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); } struct eregs { - uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; - uint32_t vector; - uint32_t error_code; - uint32_t eip; - uint32_t cs; - uint32_t eflags; + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; }; void x86_exception(struct eregs *info) { - do { - hlt(); - } while(1); + do { + hlt(); + } while(1); } diff --git a/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c b/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c index 8797568d3f..28434d3ab9 100644 --- a/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c +++ b/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c @@ -44,7 +44,7 @@ #endif #define DBGP_DEFAULT 7 - + #include <stdint.h> #include <device/pci_def.h> #include <device/pci_ids.h> @@ -83,7 +83,7 @@ #include "cpu/x86/bist.h" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "northbridge/amd/amdk8/debug.c" @@ -123,7 +123,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c" @@ -135,12 +135,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define MCP55_PCI_E_X_1 4 #define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" @@ -164,70 +164,70 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); } void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); fallback_image: #if HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) #endif ; } @@ -236,15 +236,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 +#if HAVE_FAILOVER_BOOT==1 #if USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif @@ -263,24 +263,24 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif }; - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); - int needs_reset = 0; - unsigned bsp_apicid = 0; + int needs_reset = 0; + unsigned bsp_apicid = 0; - if (bist == 0) { + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } + } pnp_enter_ext_func_mode(SERIAL_DEV); - pnp_write_config(SERIAL_DEV, 0x24, 0); + pnp_write_config(SERIAL_DEV, 0x24, 0); w83627ehg_enable_dev(SERIAL_DEV, TTYS0_BASE); pnp_exit_ext_func_mode(SERIAL_DEV); - setup_mb_resource_map(); + setup_mb_resource_map(); + + uart_init(); - uart_init(); - /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -289,79 +289,79 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) mcp55_enable_usbdebug_direct(DBGP_DEFAULT); early_usbdebug_direct_init(); #endif - console_init(); - print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + console_init(); + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); #if MEM_TRAIN_SEQ == 1 - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram #endif - setup_coherent_ht_domain(); // routing table and start other core0 + setup_coherent_ht_domain(); // routing table and start other core0 - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn #if K8_SET_FIDVID == 1 - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - } + } - enable_fid_change(); + enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); + init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - } + } #endif - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); - //It's the time to set ctrl in sysinfo now; + //It's the time to set ctrl in sysinfo now; fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); + enable_smbus(); - memreset_setup(); + memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now } diff --git a/src/mainboard/nvidia/l1_2pvv/cmos.layout b/src/mainboard/nvidia/l1_2pvv/cmos.layout index 0621cfc2fd..9d92b831cb 100644 --- a/src/mainboard/nvidia/l1_2pvv/cmos.layout +++ b/src/mainboard/nvidia/l1_2pvv/cmos.layout @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## entries @@ -53,14 +53,14 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock -399 1 e 2 dual_core +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first 420 4 e 7 boot_second 424 4 e 7 boot_third 428 4 h 0 boot_index -432 8 h 0 boot_countdown +432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi 445 1 e 1 iommu diff --git a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c index 3a8ce918e6..80659890fc 100644 --- a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c +++ b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c @@ -37,27 +37,27 @@ struct mb_sysconf_t mb_sysconf; unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 }; unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, }; @@ -67,27 +67,27 @@ static unsigned get_bus_conf_done = 0; static unsigned get_hcid(unsigned i) { - unsigned id = 0; + unsigned id = 0; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - device_t dev; + device_t dev; - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); + dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); - switch (dev->device) { - case 0x0369: //IO55 - id = 4; - break; - } + switch (dev->device) { + case 0x0369: //IO55 + id = 4; + break; + } - // we may need more way to find out hcid: subsystem id? GPIO read ? + // we may need more way to find out hcid: subsystem id? GPIO read ? - // we need use id for 1. bus num, 2. mptable, 3. acpi table + // we need use id for 1. bus num, 2. mptable, 3. acpi table - return id; + return id; } void get_bus_conf(void) @@ -96,27 +96,26 @@ void get_bus_conf(void) unsigned apicid_base; struct mb_sysconf_t *m; - device_t dev; - int i, j; + device_t dev; + int i, j; - if (get_bus_conf_done) + if (get_bus_conf_done) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; sysconf.mb = &mb_sysconf; m = sysconf.mb; memset(m, 0, sizeof(struct mb_sysconf_t)); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } - get_sblk_pci1234(); + get_sblk_pci1234(); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain @@ -132,22 +131,22 @@ void get_bus_conf(void) if (!(sysconf.pci1234[i] & 0x1)) continue; - busn_min = (sysconf.pci1234[i] >> 16) & 0xff; - busn_max = (sysconf.pci1234[i] >> 24) & 0xff; + busn_min = (sysconf.pci1234[i] >> 16) & 0xff; + busn_max = (sysconf.pci1234[i] >> 24) & 0xff; for (j = busn_min; j <= busn_max; j++) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa); + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa); } - /* MCP55b */ - for (i = 1; i < sysconf.hc_possible_num; i++) { + /* MCP55b */ + for (i = 1; i < sysconf.hc_possible_num; i++) { if (!(sysconf.pci1234[i] & 0x0f)) continue; - // check hcid type here - sysconf.hcid[i] = get_hcid(i); - if (!sysconf.hcid[i]) + // check hcid type here + sysconf.hcid[i] = get_hcid(i); + if (!sysconf.hcid[i]) continue; //unknown co processor m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff; @@ -160,6 +159,6 @@ void get_bus_conf(void) apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif m->apicid_mcp55 = apicid_base+0; - m->apicid_mcp55b = apicid_base+1; + m->apicid_mcp55b = apicid_base+1; } diff --git a/src/mainboard/nvidia/l1_2pvv/irq_tables.c b/src/mainboard/nvidia/l1_2pvv/irq_tables.c index 289726b736..d78830ddbf 100644 --- a/src/mainboard/nvidia/l1_2pvv/irq_tables.c +++ b/src/mainboard/nvidia/l1_2pvv/irq_tables.c @@ -19,11 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include <console/console.h> #include <device/pci.h> @@ -34,22 +34,22 @@ #include <cpu/amd/amdk8_sysconf.h> #include "mb_sysconf.h" -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } unsigned long write_pirq_routing_table(unsigned long addr) @@ -62,19 +62,19 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct mb_sysconf_t *m; unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; m = sysconf.mb; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -100,25 +100,25 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - for (i = 1; i < sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + for (i = 1; i < sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; } pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h b/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h index f283a6183a..763653fd32 100644 --- a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h +++ b/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h @@ -23,12 +23,12 @@ #define MB_SYSCONF_H struct mb_sysconf_t { - unsigned char bus_isa; - unsigned char bus_mcp55; - unsigned char bus_mcp55b; - unsigned apicid_mcp55; - unsigned apicid_mcp55b; - unsigned bus_type[256]; + unsigned char bus_isa; + unsigned char bus_mcp55; + unsigned char bus_mcp55b; + unsigned apicid_mcp55; + unsigned apicid_mcp55b; + unsigned bus_type[256]; unsigned sbdnb; diff --git a/src/mainboard/nvidia/l1_2pvv/mptable.c b/src/mainboard/nvidia/l1_2pvv/mptable.c index aa7c82668e..0a2a6bd513 100644 --- a/src/mainboard/nvidia/l1_2pvv/mptable.c +++ b/src/mainboard/nvidia/l1_2pvv/mptable.c @@ -31,34 +31,34 @@ void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "NVIDIA "; - static const char productid[12] = "L1_2PVV "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "NVIDIA "; + static const char productid[12] = "L1_2PVV "; + struct mp_config_table *mc; struct mb_sysconf_t *m; unsigned sbdn; int i,j; unsigned char apicpin[4]; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; @@ -66,20 +66,20 @@ void *smp_write_config_table(void *v) /*Bus: Bus ID Type*/ /* define bus and isa numbers */ - for (j = 0; j < 256 ; j++) { + for (j = 0; j < 256 ; j++) { if (m->bus_type[j]) smp_write_bus(mc, j, "PCI "); - } - smp_write_bus(mc, m->bus_isa, "ISA "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); @@ -93,17 +93,17 @@ void *smp_write_config_table(void *v) dword = 0x43c6c643; pci_write_config32(dev, 0x7c, dword); - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); + pci_write_config32(dev, 0x84, dword); - } + } if (m->bus_mcp55b) { - dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0)); - if (dev) { + dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) smp_write_ioapic(mc, m->apicid_mcp55b, 0x11, res->base); @@ -111,13 +111,13 @@ void *smp_write_config_table(void *v) dword = 0x43c60000; pci_write_config32(dev, 0x7c, dword); - dword = 0x81000000; - pci_write_config32(dev, 0x80, dword); + dword = 0x81000000; + pci_write_config32(dev, 0x80, dword); dword = 0xd00002d0; - pci_write_config32(dev, 0x84, dword); + pci_write_config32(dev, 0x84, dword); - } + } } @@ -137,35 +137,35 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 //Slot PCIE for (j = 2; j < 8; j++) { - device_t dev; + device_t dev; dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0)); if (!dev || !dev->enabled) continue; - for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4; + for (i = 0; i < 4; i++) + apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4; smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); } //Slot PCI 32 { - device_t dev; + device_t dev; dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0)); if (dev && dev->enabled) { for (i = 0; i < 4; i++) diff --git a/src/mainboard/nvidia/l1_2pvv/resourcemap.c b/src/mainboard/nvidia/l1_2pvv/resourcemap.c index f289ce7898..3cabcac3d5 100644 --- a/src/mainboard/nvidia/l1_2pvv/resourcemap.c +++ b/src/mainboard/nvidia/l1_2pvv/resourcemap.c @@ -161,7 +161,7 @@ static void setup_mb_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -217,7 +217,7 @@ static void setup_mb_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -225,7 +225,7 @@ static void setup_mb_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, @@ -272,7 +272,7 @@ static void setup_mb_resource_map(void) // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb index 01b7375c80..1075d4264b 100644 --- a/src/mainboard/tyan/s2912/Config.lb +++ b/src/mainboard/tyan/s2912/Config.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## ## ## Compute the location and size of where this firmware image @@ -40,7 +40,7 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## @@ -67,7 +67,7 @@ else end end -arch i386 end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -83,17 +83,17 @@ if HAVE_PIRQ_TABLE object irq_tables.o end if USE_DCACHE_RAM - if CONFIG_USE_INIT + if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" end else makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" end end @@ -102,11 +102,11 @@ end if USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb end end @@ -129,13 +129,13 @@ end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end end @@ -143,20 +143,20 @@ end ## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end end @@ -170,12 +170,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ROMSTRAP table for MCP55 ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE + if USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -189,7 +189,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### @@ -220,159 +220,159 @@ if USE_DCACHE_RAM end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME config chip.h end chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 #mc0 device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 + device pci 18.0 on end + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 device pci 0.0 on end # HT - device pci 1.0 on # LPC + device pci 1.0 on # LPC chip superio/winbond/w83627hf device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 + device pnp 2e.6 off # SFI + io 0x62 = 0x100 end - device pnp 2e.7 off # GPIO_GAME_MIDI + device pnp 2e.7 off # GPIO_GAME_MIDI io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 irq 0x70 = 5 - end + end end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end end # SM - device pci 1.1 on # SM 1 + device pci 1.1 on # SM 1 #PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # mc0 - + end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 on end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 off end # io -# end + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end end #root_complex diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 3326cdb15b..8700114cbc 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -197,7 +197,7 @@ default LIFT_BSP_APIC_ID=1 #CHIP_NAME ? default CONFIG_CHIP_NAME=1 -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G #default HW_MEM_HOLE_SIZEK=0x200000 #1G @@ -294,7 +294,7 @@ default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file -### +### ## ## The default compiler @@ -304,7 +304,7 @@ default HOSTCC="gcc" ## ## Disable the gdb stub by default -## +## default CONFIG_GDB_STUB=0 ## @@ -335,15 +335,15 @@ default TTYS0_LCS=0x3 ## ### Select the coreboot loglevel ## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details ## Request this level of debugging output default DEFAULT_CONSOLE_LOGLEVEL=8 diff --git a/src/mainboard/tyan/s2912/apc_auto.c b/src/mainboard/tyan/s2912/apc_auto.c index 7c09ae4818..d15f5ac346 100644 --- a/src/mainboard/tyan/s2912/apc_auto.c +++ b/src/mainboard/tyan/s2912/apc_auto.c @@ -44,22 +44,11 @@ #include "pc80/serial.c" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "arch/i386/lib/console.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - #include <cpu/amd/model_fxx_rev.h> #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -87,14 +76,14 @@ static void post_code(uint8_t value) { void hardwaremain(int ret_addr) { struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; id = get_node_core_id_x(); //FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP - print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); train_ram(id.nodeid, sysinfo, sysinfox); @@ -102,29 +91,29 @@ void hardwaremain(int ret_addr) go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp */ - __asm__ volatile ( - "movl %0, %%edi\n\t" - "jmp *%%edi\n\t" - :: "a"(ret_addr) - ); + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); } struct eregs { - uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; - uint32_t vector; - uint32_t error_code; - uint32_t eip; - uint32_t cs; - uint32_t eflags; + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; }; void x86_exception(struct eregs *info) { - do { - hlt(); - } while(1); + do { + hlt(); + } while(1); } diff --git a/src/mainboard/tyan/s2912/cache_as_ram_auto.c b/src/mainboard/tyan/s2912/cache_as_ram_auto.c index 3c97280a87..cd0346b31c 100644 --- a/src/mainboard/tyan/s2912/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2912/cache_as_ram_auto.c @@ -44,7 +44,7 @@ #endif #define DBGP_DEFAULT 7 - + #include <stdint.h> #include <device/pci_def.h> #include <device/pci_ids.h> @@ -83,7 +83,7 @@ #include "cpu/x86/bist.h" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "northbridge/amd/amdk8/debug.c" @@ -123,7 +123,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c" @@ -133,12 +133,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define MCP55_PCI_E_X_0 1 #define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" @@ -162,71 +162,71 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - /*serial 0 */ - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + /*serial 0 */ + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); } void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); fallback_image: #if HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) #endif ; } @@ -235,15 +235,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 +#if HAVE_FAILOVER_BOOT==1 #if USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif @@ -262,21 +262,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif }; - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); - int needs_reset = 0; - unsigned bsp_apicid = 0; + int needs_reset = 0; + unsigned bsp_apicid = 0; - if (bist == 0) { + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } + } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - setup_mb_resource_map(); + setup_mb_resource_map(); + + uart_init(); - uart_init(); - /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -285,80 +285,80 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) mcp55_enable_usbdebug_direct(DBGP_DEFAULT); early_usbdebug_direct_init(); #endif - console_init(); - print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + console_init(); + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); #if MEM_TRAIN_SEQ == 1 - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram #endif - setup_coherent_ht_domain(); // routing table and start other core0 + setup_coherent_ht_domain(); // routing table and start other core0 - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn #if K8_SET_FIDVID == 1 - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - } + } - enable_fid_change(); + enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); + init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); - } + } #endif - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } - allow_all_aps_stop(bsp_apicid); + allow_all_aps_stop(bsp_apicid); - //It's the time to set ctrl in sysinfo now; + //It's the time to set ctrl in sysinfo now; fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); + enable_smbus(); - memreset_setup(); + memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now } diff --git a/src/mainboard/tyan/s2912/cmos.layout b/src/mainboard/tyan/s2912/cmos.layout index 0621cfc2fd..9d92b831cb 100644 --- a/src/mainboard/tyan/s2912/cmos.layout +++ b/src/mainboard/tyan/s2912/cmos.layout @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## entries @@ -53,14 +53,14 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock -399 1 e 2 dual_core +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first 420 4 e 7 boot_second 424 4 e 7 boot_third 428 4 h 0 boot_index -432 8 h 0 boot_countdown +432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi 445 1 e 1 iommu diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index 9d6b9d7232..04f930fb12 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -36,28 +36,28 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables struct mb_sysconf_t mb_sysconf; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not +unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, }; @@ -67,27 +67,27 @@ static unsigned get_bus_conf_done = 0; static unsigned get_hcid(unsigned i) { - unsigned id = 0; + unsigned id = 0; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - device_t dev; + device_t dev; - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); + dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); - switch (dev->device) { - case 0x0369: //IO55 - id = 4; - break; - } + switch (dev->device) { + case 0x0369: //IO55 + id = 4; + break; + } - // we may need more way to find out hcid: subsystem id? GPIO read ? + // we may need more way to find out hcid: subsystem id? GPIO read ? - // we need use id for 1. bus num, 2. mptable, 3. acpi table + // we need use id for 1. bus num, 2. mptable, 3. acpi table - return id; + return id; } void get_bus_conf(void) @@ -96,70 +96,68 @@ void get_bus_conf(void) unsigned apicid_base; struct mb_sysconf_t *m; - device_t dev; - int i, j; + device_t dev; + int i, j; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; sysconf.mb = &mb_sysconf; - + m = sysconf.mb; memset(m, 0, sizeof(struct mb_sysconf_t)); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } - get_sblk_pci1234(); + get_sblk_pci1234(); sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain m->bus_type[0] = 1; //pci - + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } } for(i=0; i< sysconf.hc_possible_num; i++) { if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff; - for (j = busn; j <= busn_max; j++) + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff; + for (j = busn; j <= busn_max; j++) m->bus_type[j] = 1; - if(m->bus_isa <= busn_max) + if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } - - /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif m->apicid_mcp55 = apicid_base+0; diff --git a/src/mainboard/tyan/s2912/irq_tables.c b/src/mainboard/tyan/s2912/irq_tables.c index c79f0ca92e..313ea60981 100644 --- a/src/mainboard/tyan/s2912/irq_tables.c +++ b/src/mainboard/tyan/s2912/irq_tables.c @@ -19,11 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include <console/console.h> #include <device/pci.h> @@ -34,22 +34,22 @@ #include <cpu/amd/amdk8_sysconf.h> #include "mb_sysconf.h" -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } unsigned long write_pirq_routing_table(unsigned long addr) @@ -62,31 +62,31 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct mb_sysconf_t *m; unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; m = sysconf.mb; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = m->bus_mcp55[0]; pirq->rtr_devfn = ((sbdn+6)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x0370; @@ -99,26 +99,26 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pci bridge write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; } - pirq->size = 32 + 16 * slot_num; + pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/tyan/s2912/mb_sysconf.h b/src/mainboard/tyan/s2912/mb_sysconf.h index d9748b5e21..83f9dbab28 100644 --- a/src/mainboard/tyan/s2912/mb_sysconf.h +++ b/src/mainboard/tyan/s2912/mb_sysconf.h @@ -23,9 +23,9 @@ #define MB_SYSCONF_H struct mb_sysconf_t { - unsigned char bus_isa; - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; + unsigned char bus_isa; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s2912/mptable.c b/src/mainboard/tyan/s2912/mptable.c index 236f778854..ff03ed7c95 100644 --- a/src/mainboard/tyan/s2912/mptable.c +++ b/src/mainboard/tyan/s2912/mptable.c @@ -31,74 +31,74 @@ void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "TYAN "; - static const char productid[12] = "S2895 "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2895 "; + struct mp_config_table *mc; struct mb_sysconf_t *m; unsigned sbdn; int i,j; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; m = sysconf.mb; /*Bus: Bus ID Type*/ - /* define bus and isa numbers */ - for(j= 0; j < 256 ; j++) { + /* define bus and isa numbers */ + for(j= 0; j < 256 ; j++) { if(m->bus_type[j]) smp_write_bus(mc, j, "PCI "); - } - smp_write_bus(mc, m->bus_isa, "ISA "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); } dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); + dword = 0xd00002d2; + pci_write_config32(dev, 0x84, dword); - } + } } - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2); @@ -112,30 +112,30 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 for(j=7; j>=2; j--) { if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } } - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2912/resourcemap.c b/src/mainboard/tyan/s2912/resourcemap.c index f289ce7898..3cabcac3d5 100644 --- a/src/mainboard/tyan/s2912/resourcemap.c +++ b/src/mainboard/tyan/s2912/resourcemap.c @@ -161,7 +161,7 @@ static void setup_mb_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -217,7 +217,7 @@ static void setup_mb_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -225,7 +225,7 @@ static void setup_mb_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, @@ -272,7 +272,7 @@ static void setup_mb_resource_map(void) // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb index 8e07ed7764..5af4ffba48 100644 --- a/src/mainboard/tyan/s2912_fam10/Config.lb +++ b/src/mainboard/tyan/s2912_fam10/Config.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## ## ## Compute the location and size of where this firmware image @@ -40,7 +40,7 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## @@ -67,7 +67,7 @@ else end end -arch i386 end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -84,17 +84,17 @@ if HAVE_PIRQ_TABLE object irq_tables.o end if USE_DCACHE_RAM makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c - if CONFIG_USE_INIT + if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" end else makerule ./cache_as_ram_auto.inc depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h" action "$(CC) -I$(TOP)/src -I. $(CFLAGS) $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" end end @@ -103,11 +103,11 @@ end if USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb end end @@ -130,13 +130,13 @@ end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end end @@ -144,20 +144,20 @@ end ## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end end @@ -171,12 +171,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ROMSTRAP table for MCP55 ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE + if USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -190,7 +190,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### @@ -221,7 +221,7 @@ if USE_DCACHE_RAM end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME config chip.h @@ -230,158 +230,158 @@ end dir /southbridge/nvidia/mcp55 chip northbridge/amd/amdfam10/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F_1207 - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdfam10 #mc0 device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on + device pci 18.0 on end + device pci 18.0 on # SB on link 2.0. - chip southbridge/nvidia/mcp55 + chip southbridge/nvidia/mcp55 device pci 0.0 on end # HT - device pci 1.0 on # LPC + device pci 1.0 on # LPC chip superio/winbond/w83627hf device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 + device pnp 2e.6 off # SFI + io 0x62 = 0x100 end - device pnp 2e.7 off # GPIO_GAME_MIDI + device pnp 2e.7 off # GPIO_GAME_MIDI io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 irq 0x70 = 5 - end + end end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end end # SM - device pci 1.1 on # SM 1 + device pci 1.1 on # SM 1 #PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on - chip drivers/pci/onboard - device pci 4.0 on end +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on + chip drivers/pci/onboard + device pci 4.0 on end register "rom_address" = "0xfff80000" end end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end end # mc0 - + end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 on end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 off end # io -# end + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end end #root_complex diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb index 5f2eca6357..5e048a0ce2 100644 --- a/src/mainboard/tyan/s2912_fam10/Options.lb +++ b/src/mainboard/tyan/s2912_fam10/Options.lb @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -201,7 +201,7 @@ default LIFT_BSP_APIC_ID=1 #CHIP_NAME ? default CONFIG_CHIP_NAME=1 -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G #default HW_MEM_HOLE_SIZEK=0x200000 #1G @@ -304,7 +304,7 @@ default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file -### +### ## ## The default compiler @@ -314,7 +314,7 @@ default HOSTCC="gcc" ## ## Disable the gdb stub by default -## +## default CONFIG_GDB_STUB=0 ## @@ -345,15 +345,15 @@ default TTYS0_LCS=0x3 ## ### Select the coreboot loglevel ## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details ## Request this level of debugging output default DEFAULT_CONSOLE_LOGLEVEL=8 diff --git a/src/mainboard/tyan/s2912_fam10/apc_auto.c b/src/mainboard/tyan/s2912_fam10/apc_auto.c index 7c09ae4818..d15f5ac346 100644 --- a/src/mainboard/tyan/s2912_fam10/apc_auto.c +++ b/src/mainboard/tyan/s2912_fam10/apc_auto.c @@ -44,22 +44,11 @@ #include "pc80/serial.c" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "arch/i386/lib/console.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - #include <cpu/amd/model_fxx_rev.h> #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -87,14 +76,14 @@ static void post_code(uint8_t value) { void hardwaremain(int ret_addr) { struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; id = get_node_core_id_x(); //FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP - print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); train_ram(id.nodeid, sysinfo, sysinfox); @@ -102,29 +91,29 @@ void hardwaremain(int ret_addr) go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp */ - __asm__ volatile ( - "movl %0, %%edi\n\t" - "jmp *%%edi\n\t" - :: "a"(ret_addr) - ); + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); } struct eregs { - uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; - uint32_t vector; - uint32_t error_code; - uint32_t eip; - uint32_t cs; - uint32_t eflags; + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; }; void x86_exception(struct eregs *info) { - do { - hlt(); - } while(1); + do { + hlt(); + } while(1); } diff --git a/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c b/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c index 63318b5b1c..ae619e5827 100644 --- a/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c @@ -37,7 +37,7 @@ #define FAM10_SET_FIDVID_CORE_RANGE 0 #define DBGP_DEFAULT 7 - + #include <stdint.h> #include <device/pci_def.h> #include <device/pci_ids.h> @@ -49,7 +49,7 @@ #include "pc80/mc146818rtc_early.c" static void post_code(u8 value) { - outb(value, 0x80); + outb(value, 0x80); } #if USE_FAILOVER_IMAGE==0 @@ -79,7 +79,7 @@ static void post_code(u8 value) { #include "cpu/x86/bist.h" #if CONFIG_USE_INIT == 0 - #include "lib/memcpy.c" + #include "lib/memcpy.c" #endif #include "northbridge/amd/amdfam10/debug.c" @@ -118,7 +118,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdfam10/raminit_amdmct.c" #include "northbridge/amd/amdfam10/amdfam10_pci.c" -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/quadcore/quadcore.c" @@ -128,12 +128,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define MCP55_PCI_E_X_0 1 #define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" @@ -157,72 +157,72 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - /*serial 0 */ - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + /*serial 0 */ + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); } void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); fallback_image: #if HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) #endif ; } @@ -231,15 +231,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 +#if HAVE_FAILOVER_BOOT==1 #if USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif @@ -252,24 +252,24 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { - struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); u32 bsp_apicid = 0; u32 val; u32 wants_reset; msr_t msr; - + post_code(0x30); - if (bist == 0) { + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } + } post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); + uart_init(); + console_init(); printk_debug("\n"); /* Halt if there was a built in self test failure */ @@ -286,7 +286,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) printk_debug("bsp_apicid = %02x \n", bsp_apicid); printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); - /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -308,9 +307,9 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) /* wait for all the APs core0 started by finalize_node_setup. */ /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. */ wait_all_core0_started(); @@ -329,7 +328,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ + * need to be done once.*/ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); post_code(0x39); @@ -357,7 +356,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk_debug("mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); diff --git a/src/mainboard/tyan/s2912_fam10/cmos.layout b/src/mainboard/tyan/s2912_fam10/cmos.layout index 2a147e2feb..07492b6695 100644 --- a/src/mainboard/tyan/s2912_fam10/cmos.layout +++ b/src/mainboard/tyan/s2912_fam10/cmos.layout @@ -1,23 +1,23 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## entries @@ -53,14 +53,14 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock -399 1 e 2 quad_core +399 1 e 2 quad_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first 420 4 e 7 boot_second 424 4 e 7 boot_third 428 4 h 0 boot_index -432 8 h 0 boot_countdown +432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi 445 1 e 1 iommu diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c index d1cec8d815..79520bdcf3 100644 --- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c +++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c @@ -72,67 +72,66 @@ void get_bus_conf(void) unsigned apicid_base; struct mb_sysconf_t *m; - device_t dev; - int i, j; + device_t dev; + int i, j; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; sysconf.mb = &mb_sysconf; - + m = sysconf.mb; memset(m, 0, sizeof(struct mb_sysconf_t)); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } - get_pci1234(); + get_pci1234(); m->bus_type[0] = 1; //pci sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } } for(i=0; i< sysconf.hc_possible_num; i++) { if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff; - for (j = busn; j <= busn_max; j++) + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff; + for (j = busn; j <= busn_max; j++) m->bus_type[j] = 1; - if(m->bus_isa <= busn_max) + if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } - /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif m->apicid_mcp55 = apicid_base+0; diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index 2640837bc2..e74096f842 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -20,10 +20,10 @@ */ /* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include <console/console.h> #include <device/pci.h> @@ -38,18 +38,18 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } unsigned long write_pirq_routing_table(unsigned long addr) @@ -62,19 +62,19 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct mb_sysconf_t *m; unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; m = sysconf.mb; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -99,14 +99,14 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pci bridge write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; } #if CBB @@ -120,14 +120,14 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h index d9748b5e21..83f9dbab28 100644 --- a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h +++ b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h @@ -23,9 +23,9 @@ #define MB_SYSCONF_H struct mb_sysconf_t { - unsigned char bus_isa; - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; + unsigned char bus_isa; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s2912_fam10/mptable.c b/src/mainboard/tyan/s2912_fam10/mptable.c index dba25b42f4..d66a598842 100644 --- a/src/mainboard/tyan/s2912_fam10/mptable.c +++ b/src/mainboard/tyan/s2912_fam10/mptable.c @@ -31,74 +31,74 @@ void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "TYAN "; - static const char productid[12] = "S2895 "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2895 "; + struct mp_config_table *mc; struct mb_sysconf_t *m; unsigned sbdn; int i,j; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; m = sysconf.mb; /*Bus: Bus ID Type*/ - /* define bus and isa numbers */ - for(j= 0; j < 256 ; j++) { + /* define bus and isa numbers */ + for(j= 0; j < 256 ; j++) { if(m->bus_type[j]) smp_write_bus(mc, j, "PCI "); - } - smp_write_bus(mc, m->bus_isa, "ISA "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); } dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); + dword = 0xd00002d2; + pci_write_config32(dev, 0x84, dword); - } + } } - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2); @@ -112,30 +112,30 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 for(j=7; j>=2; j--) { if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } } - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2912_fam10/resourcemap.c b/src/mainboard/tyan/s2912_fam10/resourcemap.c index 60633d5ef1..73d3d43014 100644 --- a/src/mainboard/tyan/s2912_fam10/resourcemap.c +++ b/src/mainboard/tyan/s2912_fam10/resourcemap.c @@ -161,7 +161,7 @@ static void setup_mb_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000, @@ -217,7 +217,7 @@ static void setup_mb_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -225,7 +225,7 @@ static void setup_mb_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, @@ -272,7 +272,7 @@ static void setup_mb_resource_map(void) // PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ // PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000, }; |