diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/gru/mainboard.c | 40 |
1 files changed, 29 insertions, 11 deletions
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c index d34a9f730a..7e360e7880 100644 --- a/src/mainboard/google/gru/mainboard.c +++ b/src/mainboard/google/gru/mainboard.c @@ -235,18 +235,36 @@ static void setup_usb(void) /* A few magic PHY tuning values that improve eye diagram amplitude * and make it extra sure we get reliable communication in firmware. */ /* Set max ODT compensation voltage and current tuning reference. */ - write32(&rk3399_grf->usbphy0_ctrl[3], 0x0fff02e3); - write32(&rk3399_grf->usbphy1_ctrl[3], 0x0fff02e3); - /* Set max pre-emphasis level, only on Kevin PHY0 and PHY1, - * and disable the pre-emphasize in eop state to avoid - * mis-trigger the disconnect detection. */ + write32(&rk3399_grf->usbphy0_ctrl[3], RK_CLRSETBITS(0xfff, 0x2e3)); + write32(&rk3399_grf->usbphy1_ctrl[3], RK_CLRSETBITS(0xfff, 0x2e3)); + if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN)) { - write32(&rk3399_grf->usbphy0_ctrl[12], 0xffff00a7); - write32(&rk3399_grf->usbphy1_ctrl[12], 0xffff00a7); - write32(&rk3399_grf->usbphy0_ctrl[0], 0x00010000); - write32(&rk3399_grf->usbphy1_ctrl[0], 0x00010000); - write32(&rk3399_grf->usbphy0_ctrl[13], 0x00010000); - write32(&rk3399_grf->usbphy1_ctrl[13], 0x00010000); + /* Set max pre-emphasis level, only on Kevin PHY0 and PHY1 */ + write32(&rk3399_grf->usbphy0_ctrl[12], + RK_CLRSETBITS(0xffff, 0xa7)); + write32(&rk3399_grf->usbphy1_ctrl[12], + RK_CLRSETBITS(0xffff, 0xa7)); + + /* Disable the pre-emphasize in eop state and chirp + * state to avoid mis-trigger the disconnect detection + * and also avoid high-speed handshake fail */ + write32(&rk3399_grf->usbphy0_ctrl[0], RK_CLRBITS(0x3)); + write32(&rk3399_grf->usbphy1_ctrl[0], RK_CLRBITS(0x3)); + write32(&rk3399_grf->usbphy0_ctrl[13], RK_CLRBITS(0x3)); + write32(&rk3399_grf->usbphy1_ctrl[13], RK_CLRBITS(0x3)); + + /* ODT auto compensation bypass, set max driver strength */ + write32(&rk3399_grf->usbphy0_ctrl[2], + RK_CLRSETBITS(0x7e << 4, 0x60 << 4)); + write32(&rk3399_grf->usbphy1_ctrl[2], + RK_CLRSETBITS(0x7e << 4, 0x60 << 4)); + + /* ODT auto refresh bypass, and set the max + * bias current tuning reference */ + write32(&rk3399_grf->usbphy0_ctrl[3], + RK_CLRSETBITS(0x21c, 1 << 4)); + write32(&rk3399_grf->usbphy1_ctrl[3], + RK_CLRSETBITS(0x21c, 1 << 4)); } setup_usb_otg0(); |