summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/aopen/dxplplusu/romstage.c5
-rw-r--r--src/northbridge/intel/e7505/raminit.c74
-rw-r--r--src/northbridge/intel/e7505/raminit.h4
3 files changed, 28 insertions, 55 deletions
diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c
index 7f66fc5aea..6c74c1febf 100644
--- a/src/mainboard/aopen/dxplplusu/romstage.c
+++ b/src/mainboard/aopen/dxplplusu/romstage.c
@@ -21,11 +21,6 @@
#include <southbridge/intel/i82801dx/i82801dx.h>
#include <northbridge/intel/e7505/raminit.h>
-int spd_read_byte(unsigned int device, unsigned int address)
-{
- return smbus_read_byte(device, address);
-}
-
void mainboard_romstage_entry(void)
{
static const struct mem_controller memctrl[] = {
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c
index 051b206523..972a2f37ee 100644
--- a/src/northbridge/intel/e7505/raminit.c
+++ b/src/northbridge/intel/e7505/raminit.c
@@ -39,6 +39,7 @@
#include <spd.h>
#include <sdram_mode.h>
#include <timestamp.h>
+#include <southbridge/intel/i82801dx/i82801dx.h>
#include "raminit.h"
#include "e7505.h"
@@ -338,20 +339,18 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
pgsz.side2 = 0;
// Side 1
- value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
+ value = smbus_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
if (value < 0)
goto hw_err;
pgsz.side1 = value & 0xf; // # columns in bank 1
/* Get the module data width and convert it to a power of two */
- value =
- spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB);
+ value = smbus_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB);
if (value < 0)
goto hw_err;
module_data_width = (value & 0xff) << 8;
- value =
- spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB);
+ value = smbus_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB);
if (value < 0)
goto hw_err;
module_data_width |= (value & 0xff);
@@ -359,7 +358,7 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
pgsz.side1 += log2(module_data_width);
/* side two */
- value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
+ value = smbus_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
if (value < 0)
goto hw_err;
if (value > 2)
@@ -367,8 +366,7 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
if (value == 2) {
pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently
- value =
- spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
+ value = smbus_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
if (value < 0)
goto hw_err;
if ((value & 0xf0) != 0) {
@@ -399,8 +397,7 @@ static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
width.side1 = 0;
width.side2 = 0;
- value =
- spd_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH);
+ value = smbus_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH);
die_on_spd_error(value);
width.side1 = value & 0x7f; // Mask off bank 2 flag
@@ -409,8 +406,7 @@ static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
width.side2 = width.side1 << 1; // Bank 2 exists and is double-width
} else {
// If bank 2 exists, it's the same width as bank 1
- value =
- spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
+ value = smbus_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
die_on_spd_error(value);
if (value == 2)
@@ -442,7 +438,7 @@ static struct dimm_size spd_get_dimm_size(unsigned int dimm_socket_address)
if (sz.side1 > 0) {
- value = spd_read_byte(dimm_socket_address, SPD_NUM_ROWS);
+ value = smbus_read_byte(dimm_socket_address, SPD_NUM_ROWS);
die_on_spd_error(value);
sz.side1 += value & 0xf;
@@ -456,8 +452,7 @@ static struct dimm_size spd_get_dimm_size(unsigned int dimm_socket_address)
sz.side2 += value; // Symmetric
}
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_NUM_BANKS_PER_SDRAM);
die_on_spd_error(value);
@@ -486,8 +481,8 @@ static uint8_t are_spd_values_equal(uint8_t spd_byte_number,
uint16_t dimm1_address)
{
uint8_t bEqual = 0;
- int dimm0_value = spd_read_byte(dimm0_address, spd_byte_number);
- int dimm1_value = spd_read_byte(dimm1_address, spd_byte_number);
+ int dimm0_value = smbus_read_byte(dimm0_address, spd_byte_number);
+ int dimm1_value = smbus_read_byte(dimm1_address, spd_byte_number);
if ((dimm0_value >= 0) && (dimm1_value >= 0)
&& (dimm0_value == dimm1_value))
@@ -541,25 +536,23 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
if (channel0_dimm == 0)
continue; // No such socket on this mainboard
- if (spd_read_byte(channel0_dimm, SPD_MEMORY_TYPE) !=
+ if (smbus_read_byte(channel0_dimm, SPD_MEMORY_TYPE) !=
SPD_MEMORY_TYPE_SDRAM_DDR)
continue;
#ifdef VALIDATE_DIMM_COMPATIBILITY
- if (spd_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) !=
+ if (smbus_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) !=
SPD_VOLTAGE_SSTL2)
continue; // Unsupported voltage
// E7501 does not support unregistered DIMMs
- spd_value =
- spd_read_byte(channel0_dimm, SPD_MODULE_ATTRIBUTES);
+ spd_value = smbus_read_byte(channel0_dimm, SPD_MODULE_ATTRIBUTES);
if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0))
continue;
// Must support burst = 4 for dual-channel operation on E7501
// NOTE: for single-channel, burst = 8 is required
- spd_value =
- spd_read_byte(channel0_dimm,
+ spd_value = smbus_read_byte(channel0_dimm,
SPD_SUPPORTED_BURST_LENGTHS);
if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0))
continue;
@@ -600,16 +593,14 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
ASSERT(channel1_dimm != 0); // No such socket on this mainboard??
// NOTE: unpopulated DIMMs cause read to fail
- spd_value =
- spd_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES);
+ spd_value = smbus_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES);
if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) {
printk(BIOS_DEBUG, "Skipping un-matched DIMMs - only dual-channel operation supported\n");
continue;
}
#ifdef VALIDATE_DIMM_COMPATIBILITY
- spd_value =
- spd_read_byte(channel1_dimm,
+ spd_value = smbus_read_byte(channel1_dimm,
SPD_SUPPORTED_BURST_LENGTHS);
if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0))
continue;
@@ -942,24 +933,21 @@ static void configure_e7501_dram_timing(const struct mem_controller *ctrl,
dimm_socket_address =
ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL];
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_MIN_ROW_PRECHARGE_TIME);
if (value < 0)
goto hw_err;
if (value > slowest_row_precharge)
slowest_row_precharge = value;
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_MIN_RAS_TO_CAS_DELAY);
if (value < 0)
goto hw_err;
if (value > slowest_ras_cas_delay)
slowest_ras_cas_delay = value;
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY);
if (value < 0)
goto hw_err;
@@ -1075,8 +1063,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
dimm_socket_address =
ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL];
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_ACCEPTABLE_CAS_LATENCIES);
if (value < 0)
goto hw_err;
@@ -1086,8 +1073,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
// Can we support the highest CAS# latency?
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_MIN_CYCLE_TIME_AT_CAS_MAX);
if (value < 0)
goto hw_err;
@@ -1102,8 +1088,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
current_cas_latency >>= 1;
if (current_cas_latency != 0) {
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_SDRAM_CYCLE_TIME_2ND);
if (value < 0)
goto hw_err;
@@ -1114,8 +1099,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
// Can we support the next-highest CAS# latency (max - 1.0)?
current_cas_latency >>= 1;
if (current_cas_latency != 0) {
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_SDRAM_CYCLE_TIME_3RD);
if (value < 0)
goto hw_err;
@@ -1247,15 +1231,14 @@ static void configure_e7501_dram_controller_mode(const struct
// Disable ECC mode if any one of the DIMMs does not support ECC
// SJM: Should we just die here? E7501 datasheet says non-ECC DIMMs aren't supported.
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_DIMM_CONFIG_TYPE);
die_on_spd_error(value);
if (value != ERROR_SCHEME_ECC) {
controller_mode &= ~(3 << 20);
}
- value = spd_read_byte(dimm_socket_address, SPD_REFRESH);
+ value = smbus_read_byte(dimm_socket_address, SPD_REFRESH);
die_on_spd_error(value);
value &= 0x7f; // Mask off self-refresh bit
if (value > MAX_SPD_REFRESH_RATE) {
@@ -1281,8 +1264,7 @@ static void configure_e7501_dram_controller_mode(const struct
// Switch to 2 clocks for address/command if required by any one of the DIMMs
// NOTE: At 133 MHz, 1 clock == 7.52 ns
- value =
- spd_read_byte(dimm_socket_address,
+ value = smbus_read_byte(dimm_socket_address,
SPD_CMD_SIGNAL_INPUT_HOLD_TIME);
die_on_spd_error(value);
if (value >= 0xa0) { /* At 133MHz this constant should be 0x75 */
diff --git a/src/northbridge/intel/e7505/raminit.h b/src/northbridge/intel/e7505/raminit.h
index f3fc264200..c65675f820 100644
--- a/src/northbridge/intel/e7505/raminit.h
+++ b/src/northbridge/intel/e7505/raminit.h
@@ -34,8 +34,4 @@ void e7505_mch_init(const struct mem_controller *memctrl);
void e7505_mch_done(const struct mem_controller *memctrl);
int e7505_mch_is_ready(void);
-
-/* Mainboard exports this. */
-int spd_read_byte(unsigned int device, unsigned int address);
-
#endif /* RAMINIT_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 07:38:26 +0000