diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/pcengines/apu1/BiosCallOuts.c | 3 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/Makefile.inc | 2 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/devicetree.cb | 1 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/gpio_ftns.c | 68 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/gpio_ftns.h | 47 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/mainboard.c | 19 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/romstage.c | 41 |
7 files changed, 180 insertions, 1 deletions
diff --git a/src/mainboard/pcengines/apu1/BiosCallOuts.c b/src/mainboard/pcengines/apu1/BiosCallOuts.c index d97fe22153..0bd74fe4c1 100644 --- a/src/mainboard/pcengines/apu1/BiosCallOuts.c +++ b/src/mainboard/pcengines/apu1/BiosCallOuts.c @@ -24,6 +24,7 @@ #include "heapManager.h" #include "SB800.h" #include <stdlib.h> +#include "gpio_ftns.h" static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr); @@ -59,7 +60,7 @@ static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *Conf AGESA_STATUS Status = AGESA_UNSUPPORTED; #ifdef __PRE_RAM__ AGESA_READ_SPD_PARAMS *info = ConfigPtr; - u8 index = 0; + u8 index = get_spd_offset(); if (info->MemChannelId > 0) return AGESA_UNSUPPORTED; diff --git a/src/mainboard/pcengines/apu1/Makefile.inc b/src/mainboard/pcengines/apu1/Makefile.inc index 749a6ad144..3695daa470 100644 --- a/src/mainboard/pcengines/apu1/Makefile.inc +++ b/src/mainboard/pcengines/apu1/Makefile.inc @@ -28,10 +28,12 @@ endif romstage-y += buildOpts.c romstage-y += BiosCallOuts.c romstage-y += PlatformGnbPcie.c +romstage-y += gpio_ftns.c ramstage-y += buildOpts.c ramstage-y += BiosCallOuts.c ramstage-y += PlatformGnbPcie.c +ramstage-y += gpio_ftns.c ## DIMM SPD for on-board memory SPD_BIN = $(obj)/spd.bin diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index 5f6f9c9ee7..a0a6a35f52 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -87,6 +87,7 @@ chip northbridge/amd/agesa/family14/root_complex device pci 16.0 on end # OHCI USB 10-13 device pci 16.2 on end # EHCI USB 10-13 register "gpp_configuration" = "0" + register "disconnect_pcib" = "1" register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 # end # device pci 18.0 diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.c b/src/mainboard/pcengines/apu1/gpio_ftns.c new file mode 100644 index 0000000000..b683543240 --- /dev/null +++ b/src/mainboard/pcengines/apu1/gpio_ftns.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/io.h> +#include "SBPLATFORM.h" +#include <southbridge/amd/cimx/cimx_util.h> +#include "gpio_ftns.h" + +u32 find_gpio_base(void) +{ + u8 pm_index, pm_data; + u32 base_addr = 0; + + /* Find the ACPImmioAddr base address */ + for ( pm_index = 0x27; pm_index > 0x23; pm_index-- ) { + outb( pm_index, PM_INDEX ); + pm_data = inb( PM_DATA ); + base_addr <<= 8; + base_addr |= (u32)pm_data; + } + base_addr &= 0xFFFFF000; + return (base_addr); +} + +void configure_gpio(u32 base_addr, u32 gpio, u8 iomux_ftn, u8 setting) +{ + u8 bdata; + u8 *memptr; + + memptr = (u8 *)(base_addr + IOMUX_OFFSET + gpio); + *memptr = iomux_ftn; + + memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); + bdata = *memptr; + bdata &= 0x07; + bdata |= setting; /* set direction and data value */ + *memptr = bdata; +} + +u8 read_gpio(u32 base_addr, u32 gpio) +{ + u8 *memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); + return (*memptr & GPIO_DATA_IN) ? 1 : 0; +} + +int get_spd_offset(void) +{ + u32 base_addr = find_gpio_base(); + u8 spd_offset = read_gpio(base_addr, GPIO_16); + return spd_offset; +} diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.h b/src/mainboard/pcengines/apu1/gpio_ftns.h new file mode 100644 index 0000000000..11d5ea1c3d --- /dev/null +++ b/src/mainboard/pcengines/apu1/gpio_ftns.h @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef GPIO_FTNS_H +#define GPIO_FTNS_H + +u32 find_gpio_base(void); +void configure_gpio(u32 base_addr, u32 gpio, u8 iomux_ftn, u8 setting); +u8 read_gpio(u32 base_addr, u32 gpio); +int get_spd_offset(void); + +#define IOMUX_OFFSET 0xD00 +#define GPIO_OFFSET 0x100 +#define GPIO_10 10 // PE3 Reset +#define GPIO_11 11 // PE4 Reset +#define GPIO_15 15 // board rev strap ms bit +#define GPIO_16 16 // board rev strap ls bit +#define GPIO_17 17 // TP13 +#define GPIO_18 18 // TP10 +#define GPIO_187 187 // MODESW +#define GPIO_189 189 // LED1# +#define GPIO_190 190 // LED2# +#define GPIO_191 191 // LED3# +#define GPIO_FTN_1 0x01 +#define GPIO_OUTPUT 0x08 +#define GPIO_INPUT 0x28 +#define GPIO_DATA_IN 0x80 +#define GPIO_DATA_LOW 0x00 +#define GPIO_DATA_HIGH 0x40 + +#endif /* GPIO_FTNS_H */ diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index cf0d82300e..01a0bd2ef2 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -33,6 +33,7 @@ #include "SBPLATFORM.h" #include <southbridge/amd/cimx/sb800/pci_devs.h> #include <northbridge/amd/agesa/family14/pci_devs.h> +#include "gpio_ftns.h" void set_pcie_reset(void); void set_pcie_dereset(void); @@ -161,6 +162,24 @@ static void mainboard_enable(device_t dev) pirq_setup(); } +static void mainboard_final(void *chip_info) +{ + u32 mmio_base; + + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Final.\n"); + + /* + * LED1/D7/GPIO_189 should be 0 + * LED2/D6/GPIO_190 should be 1 + * LED3/D5/GPIO_191 should be 1 + */ + mmio_base = find_gpio_base(); + configure_gpio(mmio_base, GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); +} + struct chip_operations mainboard_ops = { .enable_dev = mainboard_enable, + .final = mainboard_final, }; diff --git a/src/mainboard/pcengines/apu1/romstage.c b/src/mainboard/pcengines/apu1/romstage.c index c555536770..e9b940020c 100644 --- a/src/mainboard/pcengines/apu1/romstage.c +++ b/src/mainboard/pcengines/apu1/romstage.c @@ -2,6 +2,8 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC + * Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,6 +34,7 @@ #include <cpu/x86/mtrr.h> #include <cpu/amd/car.h> #include <northbridge/amd/agesa/agesawrapper.h> +#include <southbridge/amd/cimx/cimx_util.h> #include <cpu/x86/bist.h> #include <cpu/x86/cache.h> #include <sb_cimx.h> @@ -41,10 +44,13 @@ #include <cpu/amd/agesa/s3_resume.h> #include <superio/nuvoton/common/nuvoton.h> #include <superio/nuvoton/nct5104d/nct5104d.h> +#include "gpio_ftns.h" #define SIO_PORT 0x2e #define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP1) +static void early_lpc_init(void); + void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; @@ -64,6 +70,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); sb_Poweron_Init(); + early_lpc_init(); + post_code(0x31); nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); @@ -112,3 +120,36 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x54); /* Should never see this post code. */ } + +static void early_lpc_init(void) +{ + u32 mmio_base; + + /* PC Engines requires system boot when power is applied. This feature is + * controlled in PM_REG 5Bh register. "Always Power On" works by writing a + * value of 05h. + */ + u8 bdata = pm_ioread(SB_PMIOA_REG5B); + bdata &= 0xf8; //clear bits 0-2 + bdata |= 0x05; //set bits 0,2 + pm_iowrite(SB_PMIOA_REG5B, bdata); + + /* Multi-function pins switch to GPIO0-35, these pins are shared with PCI pins */ + bdata = pm_ioread(SB_PMIOA_REGEA); + bdata &= 0xfe; //clear bit 0 + bdata |= 0x01; //set bit 0 + pm_iowrite(SB_PMIOA_REGEA, bdata); + + //configure required GPIOs + mmio_base = find_gpio_base(); + configure_gpio(mmio_base, GPIO_10, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_11, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH); + configure_gpio(mmio_base, GPIO_15, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_16, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_17, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_18, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_187, GPIO_FTN_1, GPIO_INPUT); + configure_gpio(mmio_base, GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); + configure_gpio(mmio_base, GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW); +} |