diff options
Diffstat (limited to 'src')
27 files changed, 25 insertions, 94 deletions
diff --git a/src/arch/armv7/Makefile.inc b/src/arch/armv7/Makefile.inc index 104577445c..8637ef434e 100644 --- a/src/arch/armv7/Makefile.inc +++ b/src/arch/armv7/Makefile.inc @@ -162,7 +162,7 @@ ramstage-y += exception.c ramstage-y += exception_asm.S romstage-srcs += $(objgenerated)/crt0.s -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/mainboard.c +ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) ifeq ($(CONFIG_GENERATE_PIRQ_TABLE),y) ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/irq_tables.c endif diff --git a/src/arch/x86/lib/c_start.S b/src/arch/x86/lib/c_start.S index c725f82670..01ffa7c42c 100644 --- a/src/arch/x86/lib/c_start.S +++ b/src/arch/x86/lib/c_start.S @@ -86,7 +86,7 @@ _start: #if CONFIG_GDB_WAIT call gdb_stub_breakpoint #endif - call hardwaremain + call main /* NOTREACHED */ .Lhlt: post_code(POST_DEAD_CODE) /* post ee */ diff --git a/src/include/bootstate.h b/src/include/bootstate.h index 40822a79e2..af189897d8 100644 --- a/src/include/bootstate.h +++ b/src/include/bootstate.h @@ -165,7 +165,7 @@ void boot_state_current_block(void); void boot_state_current_unblock(void); /* Entry into the boot state machine. */ -void hardwaremain(void); +void main(void); /* In order to schedule boot state callbacks at compile-time specify the * entries in an array using the BOOT_STATE_INIT_ENTRIES and diff --git a/src/include/console/post_codes.h b/src/include/console/post_codes.h index f66d276cdf..ba6c916fce 100644 --- a/src/include/console/post_codes.h +++ b/src/include/console/post_codes.h @@ -83,16 +83,16 @@ #define POST_ENTRY_C_START 0x13 /** - * \brief Pre call to hardwaremain() + * \brief Pre call to ram stage main() * - * POSTed right before hardwaremain is called from c_start.S + * POSTed right before ram stage main() is called from c_start.S */ #define POST_PRE_HARDWAREMAIN 0x79 /** - * \brief Entry into coreboot in hardwaremain (RAM) + * \brief Entry into coreboot in ram stage main() * - * This is the first call in hardwaremain.c. If this code is POSTed, then + * This is the first call in ram stage main(). If this code is POSTed, then * ramstage has succesfully loaded and started executing. */ #define POST_ENTRY_RAMSTAGE 0x80 diff --git a/src/lib/hardwaremain.c b/src/lib/hardwaremain.c index 56539cb3bb..a1803ed964 100644 --- a/src/lib/hardwaremain.c +++ b/src/lib/hardwaremain.c @@ -445,7 +445,7 @@ static void boot_state_schedule_static_entries(void) } } -void hardwaremain(void) +void main(void) { timestamp_stash(TS_START_RAMSTAGE); post_code(POST_ENTRY_RAMSTAGE); diff --git a/src/lib/timestamp.c b/src/lib/timestamp.c index 2f53c50e16..3f8a7bd621 100644 --- a/src/lib/timestamp.c +++ b/src/lib/timestamp.c @@ -92,7 +92,7 @@ static int timestamp_entries CAR_GLOBAL = 0; * This is needed when time stamping before the CBMEM area * is initialized. The function timestamp_sync() is used to * write the time stamps to the CBMEM area. This is done in - * hardwaremain() + * ram stage main() */ void timestamp_stash(enum timestamp_id id) diff --git a/src/mainboard/amd/dinar/get_bus_conf.c b/src/mainboard/amd/dinar/get_bus_conf.c index 128a677e7f..a59bc437d3 100644 --- a/src/mainboard/amd/dinar/get_bus_conf.c +++ b/src/mainboard/amd/dinar/get_bus_conf.c @@ -83,7 +83,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index d2c0b817f8..09e3b4ca02 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -71,7 +71,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c index 3ae4c18195..d1be8b6268 100644 --- a/src/mainboard/amd/parmer/get_bus_conf.c +++ b/src/mainboard/amd/parmer/get_bus_conf.c @@ -69,7 +69,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 11ec26e16e..8872bb5a1c 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -74,7 +74,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/south_station/get_bus_conf.c b/src/mainboard/amd/south_station/get_bus_conf.c index cbe19d83b6..165c683d86 100644 --- a/src/mainboard/amd/south_station/get_bus_conf.c +++ b/src/mainboard/amd/south_station/get_bus_conf.c @@ -71,7 +71,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/thatcher/get_bus_conf.c b/src/mainboard/amd/thatcher/get_bus_conf.c index 3ae4c18195..d1be8b6268 100644 --- a/src/mainboard/amd/thatcher/get_bus_conf.c +++ b/src/mainboard/amd/thatcher/get_bus_conf.c @@ -69,7 +69,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c index e2bd54edf2..4444937d57 100644 --- a/src/mainboard/amd/torpedo/get_bus_conf.c +++ b/src/mainboard/amd/torpedo/get_bus_conf.c @@ -76,7 +76,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/amd/union_station/get_bus_conf.c b/src/mainboard/amd/union_station/get_bus_conf.c index cbe19d83b6..165c683d86 100644 --- a/src/mainboard/amd/union_station/get_bus_conf.c +++ b/src/mainboard/amd/union_station/get_bus_conf.c @@ -71,7 +71,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/asrock/e350m1/get_bus_conf.c b/src/mainboard/asrock/e350m1/get_bus_conf.c index cbe19d83b6..165c683d86 100644 --- a/src/mainboard/asrock/e350m1/get_bus_conf.c +++ b/src/mainboard/asrock/e350m1/get_bus_conf.c @@ -71,7 +71,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/asus/f2a85-m/get_bus_conf.c b/src/mainboard/asus/f2a85-m/get_bus_conf.c index 3ae4c18195..d1be8b6268 100644 --- a/src/mainboard/asus/f2a85-m/get_bus_conf.c +++ b/src/mainboard/asus/f2a85-m/get_bus_conf.c @@ -69,7 +69,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/emulation/qemu-armv7/Makefile.inc b/src/mainboard/emulation/qemu-armv7/Makefile.inc index 80b392b11e..46ecfed9cd 100644 --- a/src/mainboard/emulation/qemu-armv7/Makefile.inc +++ b/src/mainboard/emulation/qemu-armv7/Makefile.inc @@ -13,7 +13,6 @@ ## GNU General Public License for more details. romstage-y += romstage.c -ramstage-y += ramstage.c bootblock-y += media.c romstage-y += media.c diff --git a/src/mainboard/emulation/qemu-armv7/ramstage.c b/src/mainboard/emulation/qemu-armv7/ramstage.c deleted file mode 100644 index 32e6cab95a..0000000000 --- a/src/mainboard/emulation/qemu-armv7/ramstage.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -void hardwaremain(void); -void main(void) -{ - hardwaremain(); -} diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc index 190bb36154..69bc9ba97b 100644 --- a/src/mainboard/google/snow/Makefile.inc +++ b/src/mainboard/google/snow/Makefile.inc @@ -25,5 +25,4 @@ romstage-y += wakeup.c # ramstage-y += ec.c ramstage-y += mainboard.c -ramstage-y += ramstage.c ramstage-y += chromeos.c diff --git a/src/mainboard/google/snow/ramstage.c b/src/mainboard/google/snow/ramstage.c deleted file mode 100644 index 6aa6082fcf..0000000000 --- a/src/mainboard/google/snow/ramstage.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2013 The ChromeOS Authors - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -void hardwaremain(void); -void main(void) -{ - hardwaremain(); -} diff --git a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c index 11ec26e16e..8872bb5a1c 100644 --- a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c +++ b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c @@ -74,7 +74,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/lippert/toucan-af/get_bus_conf.c b/src/mainboard/lippert/toucan-af/get_bus_conf.c index 11ec26e16e..8872bb5a1c 100644 --- a/src/mainboard/lippert/toucan-af/get_bus_conf.c +++ b/src/mainboard/lippert/toucan-af/get_bus_conf.c @@ -74,7 +74,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/supermicro/h8qgi/get_bus_conf.c b/src/mainboard/supermicro/h8qgi/get_bus_conf.c index ffaa81be78..25dc2a2b38 100644 --- a/src/mainboard/supermicro/h8qgi/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qgi/get_bus_conf.c @@ -64,7 +64,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/supermicro/h8scm/get_bus_conf.c b/src/mainboard/supermicro/h8scm/get_bus_conf.c index eff9504690..4b2cb32fa2 100644 --- a/src/mainboard/supermicro/h8scm/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm/get_bus_conf.c @@ -64,7 +64,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/mainboard/ti/beaglebone/mainboard.c b/src/mainboard/ti/beaglebone/mainboard.c deleted file mode 100644 index 1717be4369..0000000000 --- a/src/mainboard/ti/beaglebone/mainboard.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2012 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* FIXME: this is a stub */ -void main(void) -{ -} diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c index 5c119f2657..d45e1ad354 100644 --- a/src/mainboard/tyan/s8226/get_bus_conf.c +++ b/src/mainboard/tyan/s8226/get_bus_conf.c @@ -63,7 +63,7 @@ void get_bus_conf(void) * call. The logically correct place to call AmdInitLate is after PCI scan is done, * after the decision about S3 resume is made, and before the system tables are * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform + * "write_tables", called near the end of "main". There is no platform * specific entry point between the S3 resume decision point and the call to * "write_tables", and the next platform specific entry points are the calls to * the ACPI table write functions. The first of ose would seem to be the right diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c index d9b85e4b98..3f9c70fe10 100644 --- a/src/northbridge/via/vx800/examples/chipset_init.c +++ b/src/northbridge/via/vx800/examples/chipset_init.c @@ -604,7 +604,7 @@ void init_VIA_chipset(void) * In the dev_enumerate() phase, */ -void hardwaremain(void) +void main(void) { struct lb_memory *lb_mem; #if CONFIG_HAVE_ACPI_RESUME |