summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/southbridge/amd/sb700/sata.c83
1 files changed, 75 insertions, 8 deletions
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
index 63c07d86c4..a59708f912 100644
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -27,12 +27,15 @@
static int sata_drive_detect(int portnum, uint16_t iobar)
{
u8 byte, byte2;
+ u8 byte_prev, byte2_prev;
int i = 0;
+ byte_prev = byte2_prev = 0;
outb(0xa0 + 0x10 * (portnum % 2), iobar + 0x6);
while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
(byte != (0xa0 + 0x10 * (portnum % 2))) ||
((byte2 & 0x88) != 0)) {
- printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
+ if ((byte != byte_prev) || (byte2 != byte2_prev))
+ printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
if (byte != (0xa0 + 0x10 * (portnum % 2))) {
/* This will happen at the first iteration of this loop
* if the first SATA port is unpopulated and the
@@ -41,11 +44,22 @@ static int sata_drive_detect(int portnum, uint16_t iobar)
printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
"retrying init\n", i * 10);
return 1;
- } else
- printk(BIOS_SPEW, "drive detection not yet completed, "
- "waiting...\n");
+ } else {
+ if (i == 0)
+ printk(BIOS_SPEW, "drive detection not yet completed, "
+ "waiting...\n");
+ }
mdelay(10);
i++;
+ byte_prev = byte;
+ byte2_prev = byte2;
+
+ /* Detect stuck SATA controller and attempt reset */
+ if (i > 1024) {
+ printk(BIOS_DEBUG, "drive detection not done after %i ms, "
+ "resetting HBA and retrying init\n", i * 10);
+ return 2;
+ }
}
printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10);
return 0;
@@ -101,12 +115,13 @@ static void sata_init(struct device *dev)
uint16_t sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
uint16_t ide_bar0, ide_bar1, ide_bar2, ide_bar3;
uint16_t current_bar;
- int i, j;
+ int i, j, ret;
uint8_t nvram;
uint8_t sata_ahci_mode;
uint8_t sata_alpm_enable;
uint8_t port_count;
uint8_t max_port_count;
+ uint8_t hba_reset_count;
sata_ahci_mode = 0;
if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS)
@@ -120,14 +135,23 @@ static void sata_init(struct device *dev)
/* SATA SMBus Disable */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ hba_reset_count = 0;
+
+retry_init:
byte = pci_read_config8(sm_dev, 0xad);
/* Disable SATA SMBUS */
- byte |= (1 << 0);
- /* Enable SATA and power saving */
byte |= (1 << 1);
+ /* Enable SATA and power saving */
+ byte |= (1 << 0);
byte |= (1 << 5);
pci_write_config8(sm_dev, 0xad, byte);
+ /* Take the PHY logic out of reset */
+ word = pci_read_config16(dev, 0x84);
+ word |= 0x1 << 2;
+ word &= ~0x1f8;
+ pci_write_config16(dev, 0x84, word);
+
/* get rev_id */
rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
@@ -320,6 +344,26 @@ static void sata_init(struct device *dev)
if (port_count > max_port_count)
port_count = max_port_count;
+ /* Send COMRESET to all ports */
+ for (i = 0; i < port_count; i++) {
+ /* Read in Port-N Serial ATA Control Register */
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
+
+ /* Set Reset Bit */
+ byte |= 0x1;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Clear Reset Bit */
+ byte &= ~0x01;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+ }
+
/* RPR7.7 SATA drive detection. */
/* Use BAR5+0x128,BAR0 for Primary Slave */
/* Use BAR5+0x1A8,BAR0 for Primary Slave */
@@ -365,8 +409,31 @@ static void sata_init(struct device *dev)
current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
else
current_bar = ide_bar0;
- if (!sata_drive_detect(i, current_bar))
+ ret = sata_drive_detect(i, current_bar);
+ if (ret == 0) {
break;
+ } else if (ret == 2) {
+ /* Reset PHY logic */
+ word = pci_read_config16(dev, 0x84);
+ word &= ~(0x1 << 2);
+ word |= 0x1f8;
+ pci_write_config16(dev, 0x84, word);
+
+ /* Disable SATA controller */
+ byte = pci_read_config8(sm_dev, 0xad);
+ byte &= ~(0x1);
+ pci_write_config8(sm_dev, 0xad, byte);
+
+ mdelay(100);
+
+ /* Retry initialization */
+ hba_reset_count++;
+ if (hba_reset_count < 16)
+ goto retry_init;
+ else
+ printk(BIOS_WARNING, "HBA reset count exceeded, "
+ "continuing but AHCI drives may not function\n");
+ }
}
if (sata_ahci_mode)
printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n",