diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/intel/baskingridge/devicetree.cb | 2 | ||||
| -rw-r--r-- | src/mainboard/intel/wtm1/devicetree.cb | 9 | ||||
| -rw-r--r-- | src/mainboard/intel/wtm1/fadt.c | 14 | ||||
| -rw-r--r-- | src/mainboard/intel/wtm2/devicetree.cb | 9 | ||||
| -rw-r--r-- | src/mainboard/intel/wtm2/fadt.c | 14 | ||||
| -rw-r--r-- | src/northbridge/intel/haswell/acpi.c | 13 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/chip.h | 9 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/lpc.c | 21 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/smi.c | 250 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/smihandler.c | 279 |
10 files changed, 111 insertions, 509 deletions
diff --git a/src/mainboard/intel/baskingridge/devicetree.cb b/src/mainboard/intel/baskingridge/devicetree.cb index c74767a74f..fa3f3e7773 100644 --- a/src/mainboard/intel/baskingridge/devicetree.cb +++ b/src/mainboard/intel/baskingridge/devicetree.cb @@ -48,7 +48,7 @@ chip northbridge/intel/haswell register "gpi1_routing" = "1" register "gpi14_routing" = "2" register "alt_gp_smi_en" = "0x0000" - register "gpe0_en" = "0x4000" + register "gpe0_en_1" = "0x4000" register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" diff --git a/src/mainboard/intel/wtm1/devicetree.cb b/src/mainboard/intel/wtm1/devicetree.cb index db7c9988c7..be4fe51b41 100644 --- a/src/mainboard/intel/wtm1/devicetree.cb +++ b/src/mainboard/intel/wtm1/devicetree.cb @@ -41,12 +41,11 @@ chip northbridge/intel/haswell register "pirqg_routing" = "0x80" register "pirqh_routing" = "0x80" - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) register "alt_gp_smi_en" = "0x0000" - register "gpe0_en" = "0x0000" + register "gpe0_en_1" = "0x00000000" + register "gpe0_en_2" = "0x00000000" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" diff --git a/src/mainboard/intel/wtm1/fadt.c b/src/mainboard/intel/wtm1/fadt.c index 510b765e96..7afbbfa698 100644 --- a/src/mainboard/intel/wtm1/fadt.c +++ b/src/mainboard/intel/wtm1/fadt.c @@ -21,12 +21,12 @@ #include <device/pci.h> #include <arch/acpi.h> #include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/pch.h> void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) { acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; + u16 pmbase = get_pmbase(); memset((void *) fadt, 0, sizeof(acpi_fadt_t)); memcpy(header->signature, "FACP", 4); @@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->pm1b_cnt_blk = 0x0; fadt->pm2_cnt_blk = pmbase + 0x50; fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe0_blk = pmbase + 0x80; fadt->gpe1_blk = 0; fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; fadt->pm2_cnt_len = 1; fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; + fadt->gpe0_blk_len = 32; fadt->gpe1_blk_len = 0; fadt->gpe1_base = 0; fadt->cst_cnt = 0; @@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; fadt->x_pm_tmr_blk.addrh = 0x0; - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.space_id = 0; + fadt->x_gpe0_blk.bit_width = 0; fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrl = 0; fadt->x_gpe0_blk.addrh = 0x0; fadt->x_gpe1_blk.space_id = 1; diff --git a/src/mainboard/intel/wtm2/devicetree.cb b/src/mainboard/intel/wtm2/devicetree.cb index db7c9988c7..80c86273d8 100644 --- a/src/mainboard/intel/wtm2/devicetree.cb +++ b/src/mainboard/intel/wtm2/devicetree.cb @@ -41,12 +41,11 @@ chip northbridge/intel/haswell register "pirqg_routing" = "0x80" register "pirqh_routing" = "0x80" - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) register "alt_gp_smi_en" = "0x0000" - register "gpe0_en" = "0x0000" + register "gpe0_en_1" = "0x00000400" + register "gpe0_en_2" = "0x00000000" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" register "ide_legacy_combined" = "0x0" register "sata_ahci" = "0x1" diff --git a/src/mainboard/intel/wtm2/fadt.c b/src/mainboard/intel/wtm2/fadt.c index 510b765e96..7afbbfa698 100644 --- a/src/mainboard/intel/wtm2/fadt.c +++ b/src/mainboard/intel/wtm2/fadt.c @@ -21,12 +21,12 @@ #include <device/pci.h> #include <arch/acpi.h> #include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/pch.h> void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) { acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; + u16 pmbase = get_pmbase(); memset((void *) fadt, 0, sizeof(acpi_fadt_t)); memcpy(header->signature, "FACP", 4); @@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->pm1b_cnt_blk = 0x0; fadt->pm2_cnt_blk = pmbase + 0x50; fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe0_blk = pmbase + 0x80; fadt->gpe1_blk = 0; fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; fadt->pm2_cnt_len = 1; fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; + fadt->gpe0_blk_len = 32; fadt->gpe1_blk_len = 0; fadt->gpe1_base = 0; fadt->cst_cnt = 0; @@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; fadt->x_pm_tmr_blk.addrh = 0x0; - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.space_id = 0; + fadt->x_gpe0_blk.bit_width = 0; fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrl = 0; fadt->x_gpe0_blk.addrh = 0x0; fadt->x_gpe1_blk.space_id = 1; diff --git a/src/northbridge/intel/haswell/acpi.c b/src/northbridge/intel/haswell/acpi.c index e4d86be27f..81da086e01 100644 --- a/src/northbridge/intel/haswell/acpi.c +++ b/src/northbridge/intel/haswell/acpi.c @@ -182,17 +182,12 @@ int init_igd_opregion(igd_opregion_t *opregion) pci_write_config16(igd, SWSCI, reg16); /* clear dmisci status */ - reg16 = inw(DEFAULT_PMBASE + TCO1_STS); + reg16 = inw(get_pmbase() + TCO1_STS); reg16 |= DMISCI_STS; // reference code does an &= - outw(DEFAULT_PMBASE + TCO1_STS, reg16); + outw(get_pmbase() + TCO1_STS, reg16); - /* clear acpi tco status */ - outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS); - - /* enable acpi tco scis */ - reg16 = inw(DEFAULT_PMBASE + GPE0_EN); - reg16 |= TCOSCI_EN; - outw(DEFAULT_PMBASE + GPE0_EN, reg16); + /* clear and enable ACPI TCO SCI */ + enable_tco_sci(); return 0; } diff --git a/src/southbridge/intel/lynxpoint/chip.h b/src/southbridge/intel/lynxpoint/chip.h index ffeb977534..95bd087bdb 100644 --- a/src/southbridge/intel/lynxpoint/chip.h +++ b/src/southbridge/intel/lynxpoint/chip.h @@ -35,7 +35,7 @@ struct southbridge_intel_lynxpoint_config { uint8_t pirqh_routing; /** - * GPI Routing configuration + * GPI Routing configuration for LynxPoint-H * * Only the lower two bits have a meaning: * 00: No effect @@ -60,8 +60,11 @@ struct southbridge_intel_lynxpoint_config { uint8_t gpi14_routing; uint8_t gpi15_routing; - uint32_t gpe0_en; - uint16_t alt_gp_smi_en; + uint32_t gpe0_en_1; + uint32_t gpe0_en_2; + uint32_t gpe0_en_3; + uint32_t gpe0_en_4; + uint32_t alt_gp_smi_en; /* IDE configuration */ uint32_t ide_legacy_combined; diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 89d7350364..a943ca704b 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -184,12 +185,12 @@ static void pch_gpi_routing(device_t dev) static void pch_power_options(device_t dev) { u8 reg8; - u16 reg16, pmbase; + u16 reg16; u32 reg32; const char *state; /* Get the chip configuration */ config_t *config = dev->chip_info; - + u16 pmbase = get_pmbase(); int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; int nmi_option; @@ -257,13 +258,19 @@ static void pch_power_options(device_t dev) reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME pci_write_config16(dev, GEN_PMCON_1, reg16); - // Set the board's GPI routing. - pch_gpi_routing(dev); + /* + * Set the board's GPI routing on LynxPoint-H. + * This is done as part of GPIO configuration on LynxPoint-LP. + */ + if (pch_is_lp()) + pch_gpi_routing(dev); - pmbase = pci_read_config16(dev, 0x40) & 0xfffe; + /* GPE setup based on device tree configuration */ + enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, + config->gpe0_en_3, config->gpe0_en_4); - outl(config->gpe0_en, pmbase + GPE0_EN); - outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); + /* SMI setup based on device tree configuration */ + enable_alt_smi(config->alt_gp_smi_en); /* Set up power management block and determine sleep mode */ reg32 = inl(pmbase + 0x04); // PM1_CNT diff --git a/src/southbridge/intel/lynxpoint/smi.c b/src/southbridge/intel/lynxpoint/smi.c index a3354b8409..176d400256 100644 --- a/src/southbridge/intel/lynxpoint/smi.c +++ b/src/southbridge/intel/lynxpoint/smi.c @@ -30,240 +30,34 @@ #include <string.h> #include "pch.h" -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_DEBUG, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear ALT_GP_SMI_STS - * @return ALT_GP_SMI_STS register - */ -static u16 reset_alt_gp_smi_status(void) -{ - u16 reg16; - - reg16 = inl(pmbase + ALT_GP_SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg16, pmbase + ALT_GP_SMI_STS); - - return reg16; -} - -static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) -{ - int i; - printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); - for (i=15; i<= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); - } - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief Set the EOS bit - */ -static void smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - void southbridge_smm_init(void) { u32 smi_en; - u16 pm1_en; - u32 gpe0_en; #if CONFIG_ELOG /* Log events from chipset before clearing */ pch_log_state(); #endif printk(BIOS_DEBUG, "Initializing Southbridge SMI..."); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", get_pmbase()); - pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - smi_en = inl(pmbase + SMI_EN); + smi_en = inl(get_pmbase() + SMI_EN); if (smi_en & APMC_EN) { printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } printk(BIOS_DEBUG, "\n"); - dump_smi_status(reset_smi_status()); - dump_pm1_status(reset_pm1_status()); - dump_gpe0_status(reset_gpe0_status()); - dump_alt_gp_smi_status(reset_alt_gp_smi_status()); - dump_tco_status(reset_tco_status()); - /* Disable GPE0 PME_B0 */ - gpe0_en = inl(pmbase + GPE0_EN); - gpe0_en &= ~PME_B0_EN; - outl(gpe0_en, pmbase + GPE0_EN); + /* Dump and clear status registers */ + clear_smi_status(); + clear_pm1_status(); + clear_tco_status(); + clear_gpe_status(); - pm1_en = 0; - pm1_en |= PWRBTN_EN; - pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); + /* Configure events */ + enable_pm1(PWRBTN_EN | GBL_EN); + disable_gpe(PME_B0_EN); /* Enable SMI generation: * - on TCO events @@ -273,23 +67,7 @@ void southbridge_smm_init(void) * No SMIs: * - on microcontroller writes (io 0x62/0x66) */ - - smi_en = 0; /* reset SMI enables */ - -#if 0 - smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; -#endif - smi_en |= TCO_EN; - smi_en |= APMC_EN; - smi_en |= SLP_SMI_EN; -#if 0 - smi_en |= BIOS_EN; -#endif - - /* The following need to be on for SMIs to happen */ - smi_en |= EOS | GBL_SMI_EN; - - outl(smi_en, pmbase + SMI_EN); + enable_smi(TCO_EN | APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS); } void southbridge_trigger_smi(void) @@ -315,13 +93,13 @@ void southbridge_trigger_smi(void) void southbridge_clear_smi_status(void) { /* Clear SMI status */ - reset_smi_status(); + clear_smi_status(); /* Clear PM1 status */ - reset_pm1_status(); + clear_pm1_status(); /* Set EOS bit so other SMIs can occur. */ - smi_set_eos(); + enable_smi(EOS); } void smm_setup_structures(void *gnvs, void *tcg, void *smi1) diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c index 48dca2c8fd..49f7df8d52 100644 --- a/src/southbridge/intel/lynxpoint/smihandler.c +++ b/src/southbridge/intel/lynxpoint/smihandler.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -33,14 +34,6 @@ #include "nvs.h" -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; -u16 smm_get_pmbase(void) -{ - return pmbase; -} static u8 smm_initialized = 0; @@ -53,157 +46,6 @@ global_nvs_t *smm_get_gnvs(void) return gnvs; } -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_SPEW, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); - printk(BIOS_SPEW, "\n"); - int reg16 = inw(pmbase + PM1_EN); - printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE "); - if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - int southbridge_io_trap_handler(int smif) { switch (smif) { @@ -226,11 +68,7 @@ int southbridge_io_trap_handler(int smif) */ void southbridge_smi_set_eos(void) { - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); + enable_smi(EOS); } static void busmaster_disable_on_bus(int bus) @@ -274,6 +112,7 @@ static void southbridge_smi_sleep(void) u32 reg32; u8 slp_typ; u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + u16 pmbase = get_pmbase(); // save and recover RTC port values u8 tmp70, tmp72; @@ -284,9 +123,7 @@ static void southbridge_smi_sleep(void) outb(tmp72, 0x72); /* First, disable further SMIs */ - reg8 = inb(pmbase + SMI_EN); - reg8 &= ~SLP_SMI_EN; - outb(reg8, pmbase + SMI_EN); + disable_smi(SLP_SMI_EN); /* Figure out SLP_TYP */ reg32 = inl(pmbase + PM1_CNT); @@ -306,19 +143,26 @@ static void southbridge_smi_sleep(void) */ switch (slp_typ) { - case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; - case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; - case 5: + case SLP_TYP_S0: + printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); + break; + case SLP_TYP_S1: + printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); + break; + case SLP_TYP_S3: printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); /* Invalidate the cache before going to S3 */ wbinvd(); break; - case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; - case 7: + case SLP_TYP_S4: + printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); + break; + case SLP_TYP_S5: printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - outl(0, pmbase + GPE0_EN); + /* Disable all GPE */ + disable_all_gpe(); /* Always set the flag in case CMOS was changed on runtime. For * "KEEP", switch to "OFF" - KEEP is software emulated @@ -334,14 +178,16 @@ static void southbridge_smi_sleep(void) /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); break; - default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; + default: + printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); + break; } /* Write back to the SLP register to cause the originally intended * event again. We need to set BIT13 (SLP_EN) though to make the * sleep happen. */ - outl(reg32 | SLP_EN, pmbase + PM1_CNT); + enable_pm1_control(SLP_EN); /* Make sure to stop executing code here for S3/S4/S5 */ if (slp_typ > 1) @@ -354,8 +200,7 @@ static void southbridge_smi_sleep(void) reg32 = inl(pmbase + PM1_CNT); if (reg32 & SCI_EN) { /* The OS is not an ACPI OS, so we set the state to S0 */ - reg32 &= ~(SLP_EN | SLP_TYP); - outl(reg32, pmbase + PM1_CNT); + disable_pm1_control(SLP_EN | SLP_TYP); } } @@ -420,7 +265,6 @@ static void southbridge_smi_gsmi(void) static void southbridge_smi_apmc(void) { - u32 pmctrl; u8 reg8; em64t101_smm_state_save_area_t *state; @@ -443,20 +287,17 @@ static void southbridge_smi_apmc(void) printk(BIOS_DEBUG, "P-state control\n"); break; case APM_CNT_ACPI_DISABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl &= ~SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); + disable_pm1_control(SCI_EN); printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case APM_CNT_ACPI_ENABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl |= SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); + enable_pm1_control(SCI_EN); printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case APM_CNT_GNVS_UPDATE: if (smm_initialized) { - printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); + printk(BIOS_DEBUG, + "SMI#: SMM structures already initialized!\n"); return; } state = smi_apmc_find_state_save(reg8); @@ -479,53 +320,41 @@ static void southbridge_smi_apmc(void) static void southbridge_smi_pm1(void) { - u16 pm1_sts; - - pm1_sts = reset_pm1_status(); - dump_pm1_status(pm1_sts); + u16 pm1_sts = clear_pm1_status(); /* While OSPM is not active, poweroff immediately * on a power button event. */ if (pm1_sts & PWRBTN_STS) { // power button pressed - u32 reg32; - reg32 = (7 << 10) | (1 << 13); #if CONFIG_ELOG_GSMI elog_add_event(ELOG_TYPE_POWER_BUTTON); #endif - outl(reg32, pmbase + PM1_CNT); + disable_pm1_control(-1UL); + enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10)); } } static void southbridge_smi_gpe0(void) { - u32 gpe0_sts; - - gpe0_sts = reset_gpe0_status(); - dump_gpe0_status(gpe0_sts); + clear_gpe_status(); } static void southbridge_smi_gpi(void) { - u16 reg16; - reg16 = inw(pmbase + ALT_GP_SMI_STS); - outw(reg16, pmbase + ALT_GP_SMI_STS); - - reg16 &= inw(pmbase + ALT_GP_SMI_EN); + mainboard_smi_gpi(clear_alt_smi_status()); - mainboard_smi_gpi(reg16); - - outw(reg16, pmbase + ALT_GP_SMI_STS); + /* Clear again after mainboard handler */ + clear_alt_smi_status(); } static void southbridge_smi_mc(void) { u32 reg32; - reg32 = inl(pmbase + SMI_EN); + reg32 = inl(get_pmbase() + SMI_EN); - /* Are periodic SMIs enabled? */ + /* Are microcontroller SMIs enabled? */ if ((reg32 & MCSMI_EN) == 0) return; @@ -536,9 +365,7 @@ static void southbridge_smi_mc(void) static void southbridge_smi_tco(void) { - u32 tco_sts; - - tco_sts = reset_tco_status(); + u32 tco_sts = clear_tco_status(); /* Any TCO event? */ if (!tco_sts) @@ -561,13 +388,12 @@ static void southbridge_smi_tco(void) * box. */ printk(BIOS_DEBUG, "Switching back to RO\n"); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, + (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ /* Handle TCO timeout */ printk(BIOS_DEBUG, "TCO Timeout.\n"); - } else if (!tco_sts) { - dump_tco_status(tco_sts); } } @@ -575,7 +401,7 @@ static void southbridge_smi_periodic(void) { u32 reg32; - reg32 = inl(pmbase + SMI_EN); + reg32 = inl(get_pmbase() + SMI_EN); /* Are periodic SMIs enabled? */ if ((reg32 & PERIODIC_EN) == 0) @@ -624,11 +450,14 @@ static void southbridge_smi_monitor(void) // Fall through to debug } - printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", + trap_cycle & 0xfffc); + for (i=0; i < 4; i++) + if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); - printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + printk(BIOS_DEBUG, " read/write: %s\n", + (trap_cycle & (1 << 24)) ? "read" : "write"); if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ @@ -683,16 +512,13 @@ static smi_handler_t southbridge_smi[32] = { void southbridge_smi_handler(void) { - int i, dump = 0; + int i; u32 smi_sts; - /* Update global variable pmbase */ - pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - /* We need to clear the SMI status registers, or we won't see what's * happening in the following calls. */ - smi_sts = reset_smi_status(); + smi_sts = clear_smi_status(); /* Call SMI sub handler for each of the status bits */ for (i = 0; i < 31; i++) { @@ -700,15 +526,10 @@ void southbridge_smi_handler(void) if (southbridge_smi[i]) { southbridge_smi[i](); } else { - printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " - "handler available.\n", i); - dump = 1; + printk(BIOS_DEBUG, + "SMI_STS[%d] occured, but no " + "handler available.\n", i); } } } - - if(dump) { - dump_smi_status(smi_sts); - } - } |