summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/intel/haswell/haswell.h8
-rw-r--r--src/cpu/intel/haswell/haswell_init.c124
-rw-r--r--src/cpu/intel/haswell/smmrelocate.c153
3 files changed, 88 insertions, 197 deletions
diff --git a/src/cpu/intel/haswell/haswell.h b/src/cpu/intel/haswell/haswell.h
index 9236b77485..8298fb1699 100644
--- a/src/cpu/intel/haswell/haswell.h
+++ b/src/cpu/intel/haswell/haswell.h
@@ -193,14 +193,16 @@ void intel_cpu_haswell_finalize_smm(void);
/* Configure power limits for turbo mode */
void set_power_limits(u8 power_limit_1_time);
int cpu_config_tdp_levels(void);
-/* Returns 0 on success, < 0 on failure. */
-int smm_initialize(void);
+void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase);
+void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
+ size_t *smm_save_state_size);
+void smm_initialize(void);
void smm_relocate(void);
struct bus;
void bsp_init_and_start_aps(struct bus *cpu_bus);
/* Determine if HyperThreading is disabled. The variable is not valid until
* setup_ap_init() has been called. */
-extern int ht_disabled;
#endif
/* CPU identification */
diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c
index f488ef61a8..74147ab6dd 100644
--- a/src/cpu/intel/haswell/haswell_init.c
+++ b/src/cpu/intel/haswell/haswell_init.c
@@ -714,20 +714,6 @@ static void configure_mca(void)
wrmsr(IA32_MC0_STATUS + (i * 4), msr);
}
-static void bsp_init_before_ap_bringup(struct bus *cpu_bus)
-{
- /* Setup MTRRs based on physical address size. */
- x86_setup_mtrrs_with_detect();
- x86_mtrr_check();
-
- initialize_vr_config();
-
- if (haswell_is_ult()) {
- calibrate_24mhz_bclk();
- configure_pch_power_sharing();
- }
-}
-
/* All CPUs including BSP will run the following function. */
static void haswell_init(struct device *cpu)
{
@@ -765,47 +751,27 @@ static void haswell_init(struct device *cpu)
/* MP initialization support. */
static const void *microcode_patch;
-int ht_disabled;
+static int ht_disabled;
-static int adjust_apic_id_ht_disabled(int index, int apic_id)
+static void pre_mp_init(void)
{
- return 2 * index;
-}
-
-static void relocate_and_load_microcode(void)
-{
- /* Relocate the SMM handler. */
- smm_relocate();
-
- /* After SMM relocation a 2nd microcode load is required. */
- intel_microcode_load_unlocked(microcode_patch);
-}
+ /* Setup MTRRs based on physical address size. */
+ x86_setup_mtrrs_with_detect();
+ x86_mtrr_check();
-static void enable_smis(void)
-{
- /* Now that all APs have been relocated as well as the BSP let SMIs
- * start flowing. */
- southbridge_smm_enable_smi();
+ initialize_vr_config();
- /* Lock down the SMRAM space. */
- smm_lock();
+ if (haswell_is_ult()) {
+ calibrate_24mhz_bclk();
+ configure_pch_power_sharing();
+ }
}
-static struct mp_flight_record mp_steps[] = {
- MP_FR_NOBLOCK_APS(relocate_and_load_microcode,
- relocate_and_load_microcode),
- MP_FR_BLOCK_APS(mp_initialize_cpu, mp_initialize_cpu),
- /* Wait for APs to finish initialization before proceeding. */
- MP_FR_BLOCK_APS(NULL, enable_smis),
-};
-
-void bsp_init_and_start_aps(struct bus *cpu_bus)
+static int get_cpu_count(void)
{
- void *smm_save_area;
+ msr_t msr;
int num_threads;
int num_cores;
- msr_t msr;
- struct mp_params mp_params;
msr = rdmsr(CORE_THREAD_COUNT_MSR);
num_threads = (msr.lo >> 0) & 0xffff;
@@ -815,36 +781,60 @@ void bsp_init_and_start_aps(struct bus *cpu_bus)
ht_disabled = num_threads == num_cores;
- /* Perform any necessary BSP initialization before APs are brought up.
- * This call also allows the BSP to prepare for any secondary effects
- * from calling cpu_initialize() such as smm_init(). */
- bsp_init_before_ap_bringup(cpu_bus);
+ return num_threads;
+}
+static void get_microcode_info(const void **microcode, int *parallel)
+{
microcode_patch = intel_microcode_find();
+ *microcode = microcode_patch;
+ *parallel = 1;
+}
- /* Save default SMM area before relocation occurs. */
- smm_save_area = backup_default_smm_area();
-
- mp_params.num_cpus = num_threads;
- mp_params.parallel_microcode_load = 1;
+static int adjust_apic_id(int index, int apic_id)
+{
if (ht_disabled)
- mp_params.adjust_apic_id = adjust_apic_id_ht_disabled;
+ return 2 * index;
else
- mp_params.adjust_apic_id = NULL;
- mp_params.flight_plan = &mp_steps[0];
- mp_params.num_records = ARRAY_SIZE(mp_steps);
- mp_params.microcode_pointer = microcode_patch;
+ return index;
+}
+
+static void per_cpu_smm_trigger(void)
+{
+ /* Relocate the SMM handler. */
+ smm_relocate();
- /* Load relocation and permeanent handlers. Then initiate relocation. */
- if (smm_initialize())
- printk(BIOS_CRIT, "SMM Initialiazation failed...\n");
+ /* After SMM relocation a 2nd microcode load is required. */
+ intel_microcode_load_unlocked(microcode_patch);
+}
- if (mp_init(cpu_bus, &mp_params)) {
+static void post_mp_init(void)
+{
+ /* Now that all APs have been relocated as well as the BSP let SMIs
+ * start flowing. */
+ southbridge_smm_enable_smi();
+
+ /* Lock down the SMRAM space. */
+ smm_lock();
+}
+
+static const struct mp_ops mp_ops = {
+ .pre_mp_init = pre_mp_init,
+ .get_cpu_count = get_cpu_count,
+ .get_smm_info = smm_info,
+ .get_microcode_info = get_microcode_info,
+ .adjust_cpu_apic_entry = adjust_apic_id,
+ .pre_mp_smm_init = smm_initialize,
+ .per_cpu_smm_trigger = per_cpu_smm_trigger,
+ .relocation_handler = smm_relocation_handler,
+ .post_mp_init = post_mp_init,
+};
+
+void bsp_init_and_start_aps(struct bus *cpu_bus)
+{
+ if (mp_init_with_smm(cpu_bus, &mp_ops)) {
printk(BIOS_ERR, "MP initialization failure.\n");
}
-
- /* Restore the default SMM region. */
- restore_default_smm_area(smm_save_area);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/haswell/smmrelocate.c b/src/cpu/intel/haswell/smmrelocate.c
index 99a972e409..5c50ad1c93 100644
--- a/src/cpu/intel/haswell/smmrelocate.c
+++ b/src/cpu/intel/haswell/smmrelocate.c
@@ -91,9 +91,9 @@ static inline void write_uncore_emrr(struct smm_relocation_params *relo_params)
wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask);
}
-static void update_save_state(int cpu,
- struct smm_relocation_params *relo_params,
- const struct smm_runtime *runtime)
+static void update_save_state(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase,
+ struct smm_relocation_params *relo_params)
{
u32 smbase;
u32 iedbase;
@@ -101,7 +101,7 @@ static void update_save_state(int cpu,
/* The relocated handler runs with all CPUs concurrently. Therefore
* stagger the entry points adjusting SMBASE downwards by save state
* size * CPU num. */
- smbase = relo_params->smram_base - cpu * runtime->save_state_size;
+ smbase = staggered_smbase;
iedbase = relo_params->ied_base;
printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n",
@@ -132,8 +132,8 @@ static void update_save_state(int cpu,
} else {
em64t101_smm_state_save_area_t *save_state;
- save_state = (void *)(runtime->smbase + SMM_DEFAULT_SIZE -
- runtime->save_state_size);
+ save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE -
+ sizeof(*save_state));
save_state->smbase = smbase;
save_state->iedbase = iedbase;
@@ -161,24 +161,11 @@ static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params)
/* The relocation work is actually performed in SMM context, but the code
* resides in the ramstage module. This occurs by trampolining from the default
* SMRAM entry point to here. */
-static void asmlinkage cpu_smm_do_relocation(void *arg)
+void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase)
{
msr_t mtrr_cap;
- struct smm_relocation_params *relo_params;
- const struct smm_module_params *p;
- const struct smm_runtime *runtime;
- int cpu;
-
- p = arg;
- runtime = p->runtime;
- relo_params = p->arg;
- cpu = p->cpu;
-
- if (cpu >= CONFIG_MAX_CPUS) {
- printk(BIOS_CRIT,
- "Invalid CPU number assigned in SMM stub: %d\n", cpu);
- return;
- }
+ struct smm_relocation_params *relo_params = &smm_reloc_params;
printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu);
@@ -207,7 +194,7 @@ static void asmlinkage cpu_smm_do_relocation(void *arg)
}
/* Make appropriate changes to the save state map. */
- update_save_state(cpu, relo_params, runtime);
+ update_save_state(cpu, curr_smbase, staggered_smbase, relo_params);
/* Write EMRR and SMRR MSRs based on indicated support. */
mtrr_cap = rdmsr(MTRR_CAP_MSR);
@@ -290,49 +277,6 @@ static void fill_in_relocation_params(struct device *dev,
params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1;
}
-static void adjust_apic_id_map(struct smm_loader_params *smm_params)
-{
- struct smm_runtime *runtime;
- int i;
-
- /* Adjust the APIC id map if HT is disabled. */
- if (!ht_disabled)
- return;
-
- runtime = smm_params->runtime;
-
- /* The APIC ids increment by 2 when HT is disabled. */
- for (i = 0; i < CONFIG_MAX_CPUS; i++)
- runtime->apic_id_to_cpu[i] = runtime->apic_id_to_cpu[i] * 2;
-}
-
-static int install_relocation_handler(int num_cpus,
- struct smm_relocation_params *relo_params)
-{
- /* The default SMM entry can happen in parallel or serially. If the
- * default SMM entry is done in parallel the BSP has already setup
- * the saving state to each CPU's MSRs. At least one save state size
- * is required for the initial SMM entry for the BSP to determine if
- * parallel SMM relocation is even feasible. Set the stack size to
- * the save state size, and call into the do_relocation handler. */
- int save_state_size = sizeof(em64t101_smm_state_save_area_t);
- struct smm_loader_params smm_params = {
- .per_cpu_stack_size = save_state_size,
- .num_concurrent_stacks = num_cpus,
- .per_cpu_save_state_size = save_state_size,
- .num_concurrent_save_states = 1,
- .handler = (smm_handler_t)&cpu_smm_do_relocation,
- .handler_arg = (void *)relo_params,
- };
-
- if (smm_setup_relocation_handler(&smm_params))
- return -1;
-
- adjust_apic_id_map(&smm_params);
-
- return 0;
-}
-
static void setup_ied_area(struct smm_relocation_params *params)
{
char *ied_base;
@@ -357,88 +301,43 @@ static void setup_ied_area(struct smm_relocation_params *params)
//memset(ied_base + (2 << 20), 0, (2 << 20));
}
-static int install_permanent_handler(int num_cpus,
- struct smm_relocation_params *relo_params)
+void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
+ size_t *smm_save_state_size)
{
- /* There are num_cpus concurrent stacks and num_cpus concurrent save
- * state areas. Lastly, set the stack size to the save state size. */
- int save_state_size = sizeof(em64t101_smm_state_save_area_t);
- struct smm_loader_params smm_params = {
- .per_cpu_stack_size = save_state_size,
- .num_concurrent_stacks = num_cpus,
- .per_cpu_save_state_size = save_state_size,
- .num_concurrent_save_states = num_cpus,
- };
-
- printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n",
- relo_params->smram_base);
- if (smm_load_module((void *)relo_params->smram_base,
- relo_params->smram_size, &smm_params))
- return -1;
-
- adjust_apic_id_map(&smm_params);
-
- return 0;
-}
-
-static int cpu_smm_setup(void)
-{
- struct device *dev;
- int num_cpus;
- msr_t msr;
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0));
printk(BIOS_DEBUG, "Setting up SMI for CPU\n");
- dev = dev_find_slot(0, PCI_DEVFN(0, 0));
-
fill_in_relocation_params(dev, &smm_reloc_params);
setup_ied_area(&smm_reloc_params);
- msr = rdmsr(CORE_THREAD_COUNT_MSR);
- num_cpus = msr.lo & 0xffff;
- if (num_cpus > CONFIG_MAX_CPUS) {
- printk(BIOS_CRIT,
- "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n",
- num_cpus, CONFIG_MAX_CPUS);
- }
-
- if (install_relocation_handler(num_cpus, &smm_reloc_params)) {
- printk(BIOS_CRIT, "SMM Relocation handler install failed.\n");
- return -1;
- }
-
- if (install_permanent_handler(num_cpus, &smm_reloc_params)) {
- printk(BIOS_CRIT, "SMM Permanent handler install failed.\n");
- return -1;
- }
-
- /* Ensure the SMM handlers hit DRAM before performing first SMI. */
- /* TODO(adurbin): Is this really needed? */
- wbinvd();
-
- return 0;
+ *perm_smbase = smm_reloc_params.smram_base;
+ *perm_smsize = smm_reloc_params.smram_size;
+ *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t);
}
-int smm_initialize(void)
+void smm_initialize(void)
{
- /* Return early if CPU SMM setup failed. */
- if (cpu_smm_setup())
- return -1;
-
/* Clear the SMM state in the southbridge. */
southbridge_smm_clear_state();
- /* Run the relocation handler. */
+ /*
+ * Run the relocation handler for on the BSP to check and set up
+ * parallel SMM relocation.
+ */
smm_initiate_relocation();
if (smm_reloc_params.smm_save_state_in_msrs) {
printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n");
}
-
- return 0;
}
+/* The default SMM entry can happen in parallel or serially. If the
+ * default SMM entry is done in parallel the BSP has already setup
+ * the saving state to each CPU's MSRs. At least one save state size
+ * is required for the initial SMM entry for the BSP to determine if
+ * parallel SMM relocation is even feasible. */
void smm_relocate(void)
{
/*