diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/northbridge/via/cn700/raminit.c | 2 | ||||
-rw-r--r-- | src/northbridge/via/cx700/early_smbus.c | 6 | ||||
-rw-r--r-- | src/northbridge/via/cx700/lpc.c | 2 | ||||
-rw-r--r-- | src/northbridge/via/cx700/raminit.c | 2 | ||||
-rw-r--r-- | src/northbridge/via/cx700/vga.c | 4 | ||||
-rw-r--r-- | src/northbridge/via/vx800/early_smbus.c | 4 | ||||
-rw-r--r-- | src/northbridge/via/vx800/raminit.c | 2 | ||||
-rw-r--r-- | src/northbridge/via/vx800/vga.c | 4 | ||||
-rw-r--r-- | src/northbridge/via/vx900/lpc.c | 2 |
9 files changed, 13 insertions, 15 deletions
diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c index 20c3c8cbb9..e8a7a17814 100644 --- a/src/northbridge/via/cn700/raminit.c +++ b/src/northbridge/via/cn700/raminit.c @@ -24,7 +24,7 @@ #include <delay.h> #include "cn700.h" -#if CONFIG_DEBUG_RAM_SETUP +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) #define PRINT_DEBUG_MEM(x) printk(BIOS_DEBUG, x) #define PRINT_DEBUG_MEM_HEX8(x) printk(BIOS_DEBUG, "%02x", x) #define PRINT_DEBUG_MEM_HEX16(x) printk(BIOS_DEBUG, "%04x", x) diff --git a/src/northbridge/via/cx700/early_smbus.c b/src/northbridge/via/cx700/early_smbus.c index e106f09d5e..84a0de19e8 100644 --- a/src/northbridge/via/cx700/early_smbus.c +++ b/src/northbridge/via/cx700/early_smbus.c @@ -43,7 +43,7 @@ #define SMBUS_DELAY() outb(0x80, 0x80) /* Internal functions */ -#if CONFIG_DEBUG_SMBUS +#if IS_ENABLED(CONFIG_DEBUG_SMBUS) static void smbus_print_error(unsigned char host_status_register, int loops) { /* Check if there actually was an error */ @@ -85,7 +85,7 @@ static void smbus_wait_until_ready(void) SMBUS_DELAY(); ++loops; } -#if CONFIG_DEBUG_SMBUS +#if IS_ENABLED(CONFIG_DEBUG_SMBUS) /* Some systems seem to have a flakey SMBus. No need to spew a lot of * errors on those, once we know that SMBus access is principally * working. @@ -211,7 +211,7 @@ static void enable_smbus(void) } /* Debugging Function */ -#if CONFIG_DEBUG_SMBUS +#if IS_ENABLED(CONFIG_DEBUG_SMBUS) static void dump_spd_data(const struct mem_controller *ctrl) { int dimm, offset, regs; diff --git a/src/northbridge/via/cx700/lpc.c b/src/northbridge/via/cx700/lpc.c index c90dab7b84..4915066386 100644 --- a/src/northbridge/via/cx700/lpc.c +++ b/src/northbridge/via/cx700/lpc.c @@ -266,7 +266,7 @@ static void cx700_lpc_init(struct device *dev) { cx700_set_lpc_registers(dev); -#if CONFIG_IOAPIC +#if IS_ENABLED(CONFIG_IOAPIC) #define IO_APIC_ID 2 setup_ioapic(VIO_APIC_VADDR, IO_APIC_ID); #endif diff --git a/src/northbridge/via/cx700/raminit.c b/src/northbridge/via/cx700/raminit.c index a75be41745..682f3be16e 100644 --- a/src/northbridge/via/cx700/raminit.c +++ b/src/northbridge/via/cx700/raminit.c @@ -20,7 +20,7 @@ #include "registers.h" /* Debugging macros. */ -#if CONFIG_DEBUG_RAM_SETUP +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) #else #define PRINTK_DEBUG(x...) diff --git a/src/northbridge/via/cx700/vga.c b/src/northbridge/via/cx700/vga.c index 7cb84d2d7e..093477acff 100644 --- a/src/northbridge/via/cx700/vga.c +++ b/src/northbridge/via/cx700/vga.c @@ -27,7 +27,7 @@ #include <arch/interrupt.h> #include "registers.h" #include <x86emu/regs.h> -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE +#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) #include <device/oprom/realmode/x86.h> #endif @@ -143,7 +143,7 @@ static void write_protect_vgabios(void) static void vga_enable_console(void) { -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE +#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) /* Call VGA BIOS int10 function 0x4f14 to enable main console * Epia-M does not always autosense the main console so forcing * it on is good. diff --git a/src/northbridge/via/vx800/early_smbus.c b/src/northbridge/via/vx800/early_smbus.c index 2c8d5bf47c..816fe28740 100644 --- a/src/northbridge/via/vx800/early_smbus.c +++ b/src/northbridge/via/vx800/early_smbus.c @@ -45,7 +45,7 @@ #define SMBUS_DELAY() outb(0x80, 0x80) -#if CONFIG_DEBUG_SMBUS +#if IS_ENABLED(CONFIG_DEBUG_SMBUS) #define DEBUG(x...) printk(BIOS_DEBUG, x) #else #define DEBUG(x...) while (0) { } @@ -208,7 +208,7 @@ void smbus_fixup(const struct mem_controller *mem_ctrl) } /* Debugging Function */ -#if CONFIG_DEBUG_SMBUS +#if IS_ENABLED(CONFIG_DEBUG_SMBUS) static void dump_spd_data(void) { int dimm, offset, regs; diff --git a/src/northbridge/via/vx800/raminit.c b/src/northbridge/via/vx800/raminit.c index 69b27c6cda..f97e2f51bb 100644 --- a/src/northbridge/via/vx800/raminit.c +++ b/src/northbridge/via/vx800/raminit.c @@ -24,7 +24,7 @@ #pragma clang diagnostic ignored "-Warray-bounds" #endif -#if CONFIG_DEBUG_RAM_SETUP +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) #define PRINT_DEBUG_MEM(x) printk(BIOS_DEBUG, x) #define PRINT_DEBUG_MEM_HEX8(x) printk(BIOS_DEBUG, "%02x", x) #define PRINT_DEBUG_MEM_HEX16(x) printk(BIOS_DEBUG, "%04x", x) diff --git a/src/northbridge/via/vx800/vga.c b/src/northbridge/via/vx800/vga.c index 70a916f195..4109f62546 100644 --- a/src/northbridge/via/vx800/vga.c +++ b/src/northbridge/via/vx800/vga.c @@ -29,9 +29,7 @@ #include <cpu/x86/msr.h> #include <arch/interrupt.h> #include <x86emu/regs.h> -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE #include <device/oprom/realmode/x86.h> -#endif /* PCI Domain 1 Device 0 Function 0 */ @@ -139,7 +137,7 @@ static void write_protect_vgabios(void) static void vga_enable_console(void) { -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE +#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) /* Call VGA BIOS int10 function 0x4f14 to enable main console * Epia-M does not always autosense the main console so forcing * it on is good. diff --git a/src/northbridge/via/vx900/lpc.c b/src/northbridge/via/vx900/lpc.c index a9d24df91f..b36aaed1b0 100644 --- a/src/northbridge/via/vx900/lpc.c +++ b/src/northbridge/via/vx900/lpc.c @@ -198,7 +198,7 @@ static const struct pci_driver lpc_driver __pci_driver = { .device = PCI_DEVICE_ID_VIA_VX900_LPC, }; -#if CONFIG_PIRQ_ROUTE +#if IS_ENABLED(CONFIG_PIRQ_ROUTE) void pirq_assign_irqs(const u8 * pirq) { device_t lpc; |