summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/southbridge/amd/sb700/sata.c47
1 files changed, 35 insertions, 12 deletions
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
index ae4444600b..63c07d86c4 100644
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -131,6 +131,8 @@ static void sata_init(struct device *dev)
/* get rev_id */
rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
+ printk(BIOS_SPEW, "rev_id=%x\n", rev_id);
+
if (sata_ahci_mode) {
/* Enable link latency enhancement on A14 and above */
if (rev_id >= 0x14) {
@@ -241,6 +243,27 @@ static void sata_init(struct device *dev)
write32(sata_bar5 + 0xfc, dword);
}
+ if (sata_ahci_mode) {
+ /* FIXME
+ * SeaBIOS does not know how to spin
+ * up the drives and therefore hangs
+ * in AHCI init if this is enabled...
+ */
+ /* Enable staggered spin-up */
+ dword = read32(sata_bar5 + 0x00);
+#if 0
+ dword |= 0x1 << 27;
+#else
+ dword &= ~(0x1 << 27);
+#endif
+ write32(sata_bar5 + 0x00, dword);
+
+ /* Reset the HBA to avoid stuck drives in SeaBIOS */
+ dword = read32(sata_bar5 + 0x04);
+ dword |= 0x1;
+ write32(sata_bar5 + 0x04, dword);
+ }
+
/* Write protect Sub-Class Code */
byte = pci_read_config8(dev, 0x40);
byte &= ~(1 << 0);
@@ -367,21 +390,21 @@ static void sata_init(struct device *dev)
}
/* Below is CIM InitSataLateFar */
- /* Enable interrupts from the HBA */
- byte = read8(sata_bar5 + 0x4);
- byte |= 1 << 1;
- write8((sata_bar5 + 0x4), byte);
-
if (!sata_ahci_mode) {
- /* Clear error status */
- write32((sata_bar5 + 0x130), 0xFFFFFFFF);
- write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
- write32((sata_bar5 + 0x230), 0xFFFFFFFF);
- write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
- write32((sata_bar5 + 0x330), 0xFFFFFFFF);
- write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
+ /* Enable interrupts from the HBA */
+ byte = read8(sata_bar5 + 0x4);
+ byte |= 1 << 1;
+ write8((sata_bar5 + 0x4), byte);
}
+ /* Clear error status */
+ write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x330), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
+
/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */