diff options
Diffstat (limited to 'src/vendorcode')
106 files changed, 56795 insertions, 10 deletions
diff --git a/src/vendorcode/amd/pi/00630F01/AGESA.h b/src/vendorcode/amd/pi/00630F01/AGESA.h new file mode 100644 index 0000000000..1ef9e97521 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/AGESA.h @@ -0,0 +1,3641 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 296129 $ @e \$Date: 2014-06-23 09:45:14 -0500 (Mon, 23 Jun 2014) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AGESA_H_ +#define _AGESA_H_ + +#include "Porting.h" +#include "AMD.h" + +// +// +// AGESA Types and Definitions +// +// + +// AGESA BASIC CALLOUTS +#define AGESA_MEM_RELEASE 0x00028000ul + +// AGESA ADVANCED CALLOUTS, Processor +#define AGESA_CHECK_UMA 0x00028100ul +#define AGESA_DO_RESET 0x00028101ul +#define AGESA_ALLOCATE_BUFFER 0x00028102ul +#define AGESA_DEALLOCATE_BUFFER 0x00028103ul +#define AGESA_LOCATE_BUFFER 0x00028104ul +#define AGESA_RUNFUNC_ONAP 0x00028105ul + +// AGESA ADVANCED CALLOUTS, Memory +#define AGESA_READ_SPD 0x00028140ul +#define AGESA_HOOKBEFORE_DRAM_INIT 0x00028141ul +#define AGESA_HOOKBEFORE_DQS_TRAINING 0x00028142ul +#define AGESA_READ_SPD_RECOVERY 0x00028143ul +#define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144ul +#define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY 0x00028145ul +#define AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE 0x00028146ul +#define AGESA_EXTERNAL_VOLTAGE_ADJUST 0x00028147ul + +// AGESA IDS CALLOUTS +#define AGESA_GET_IDS_INIT_DATA 0x00028200ul + +// AGESA GNB CALLOUTS +#define AGESA_GNB_PCIE_SLOT_RESET 0x00028301ul +#define AGESA_GNB_GFX_GET_VBIOS_IMAGE 0x00028302ul +#define AGESA_GNB_PCIE_CLK_REQ 0x00028303ul + +// AGESA FCH CALLOUTS +#define AGESA_FCH_OEM_CALLOUT 0x00028401ul + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +// +//----------------------------------------------------------------------------- + +/// Configuration values for SdConfig +typedef enum { + SdDisable = 0, ///< Disabled + SdAmda, ///< AMDA, set 24,18,16, default + SdDma, ///< DMA clear 24, 16, set 18 + SdPio, ///< PIO clear 24,18,16 + SdDump ///< SD DUMP, don't touch SD +} SD_MODE; + +/// Configuration values for SdClockControl +typedef enum { + Sd50MhzTraceCableLengthWithinSixInches = 4, ///< 50Mhz, default + Sd40MhzTraceCableLengthSix2ElevenInches = 6, ///< 40Mhz + Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7, ///< 25Mhz +} SD_CLOCK_CONTROL; + +/// Configuration values for AzaliaController +typedef enum { + AzAuto = 0, ///< Auto - Detect Azalia controller automatically + AzDisable, ///< Diable - Disable Azalia controller + AzEnable ///< Enable - Enable Azalia controller +} HDA_CONFIG; + +/// Configuration values for IrConfig +typedef enum { + IrDisable = 0, ///< Disable + IrRxTx0 = 1, ///< Rx and Tx0 + IrRxTx1 = 2, ///< Rx and Tx1 + IrRxTx0Tx1 = 3 ///< Rx and both Tx0,Tx1 +} IR_CONFIG; + +/// Configuration values for SataClass +typedef enum { + SataNativeIde = 0, ///< Native IDE mode + SataRaid, ///< RAID mode + SataAhci, ///< AHCI mode + SataLegacyIde, ///< Legacy IDE mode + SataIde2Ahci, ///< IDE->AHCI mode + SataAhci7804, ///< AHCI mode as 7804 ID (AMD driver) + SataIde2Ahci7804 ///< IDE->AHCI mode as 7804 ID (AMD driver) +} SATA_CLASS; + +/// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG +typedef enum { + PortA4 = 0, ///< 4:0:0:0 + PortA2B2 = 2, ///< 2:2:0:0 + PortA2B1C1 = 3, ///< 2:1:1:0 + PortA1B1C1D1 = 4 ///< 1:1:1:1 +} GPP_LINKMODE; + +/// Configuration values for FchPowerFail +typedef enum { + AlwaysOff = 0, ///< Always power off after power resumes + AlwaysOn = 1, ///< Always power on after power resumes + UsePrevious = 3, ///< Resume to same setting when power fails +} POWER_FAIL; + + +/// Configuration values for SATA Link Speed +typedef enum { + Gen1 = 1, ///< SATA port GEN1 speed + Gen2 = 2, ///< SATA port GEN2 speed + Gen3 = 3, ///< SATA port GEN3 speed +} SATA_SPEED; + + +/// Configuration values for GPIO function +typedef enum { + Function0 = 0, ///< GPIO Function 1 + Function1 = 1, ///< GPIO Function 1 + Function2 = 2, ///< GPIO Function 2 + Function3 = 3, ///< GPIO Function 3 +} GPIO_FUN; + +/// Configuration values for memory phy voltage (VDDR) +typedef enum { + VOLT0_95, ///< VDDR 0.95V + VOLT1_05, ///< VDDR 1.05V + MAX_VDDR ///< Maxmum value for this enum definition +} MEMORY_PHY_VOLTAGE; + +/// Configuration values for GPIO_CFG +typedef enum { + OwnedByEc = 1 << 0, ///< This bit can only be written by EC + OwnedByHost = 1 << 1, ///< This bit can only be written by host (BIOS) + Sticky = 1 << 2, ///< If set, [6:3] are sticky + PullUpB = 1 << 3, ///< 0: Pullup enable; 1: Pullup disabled + PullDown = 1 << 4, ///< 0: Pulldown disabled; 1: Pulldown enable + GpioOutEnB = 1 << 5, ///< 0: Output enable; 1: Output disable + GpioOut = 1 << 6, ///< Output state when GpioOutEnB is 0 + GpioIn = 1 << 7, ///< This bit is read only - current pin state +} CFG_BYTE; + +/// FCH GPIO CONTROL +typedef struct { + IN UINT8 GpioPin; ///< Gpio Pin, valid range: 0-67, 128-150, 160-228 + IN GPIO_FUN PinFunction; ///< Multi-function selection + IN CFG_BYTE CfgByte; ///< GPIO Register value +} GPIO_CONTROL; + +/// +/// FCH SCI MAP CONTROL +/// +typedef struct { + IN UINT8 InputPin; ///< Input Pin, valid range 0-63 + IN UINT8 GpeMap; ///< Gpe Map, valid range 0-31 +} SCI_MAP_CONTROL; + +/// +/// FCH SATA PHY CONTROL +/// +typedef struct { + IN BOOLEAN CommonPhy; ///< Common PHY or not + ///< @li <b>FALSE</b> - Only applied to specified port + ///< @li <b>TRUE</b> - Apply to all SATA ports + IN SATA_SPEED Gen; ///< SATA speed + IN UINT8 Port; ///< Port number, valid range: 0-7 + IN UINT32 PhyData; ///< SATA PHY data, valid range: 0-0xFFFFFFFF +} SATA_PHY_CONTROL; + +/// +/// FCH Component Data Structure in InitReset stage +/// +typedef struct { + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN BOOLEAN Xhci0Enable; ///< XHCI0 controller function + ///< @li <b>FALSE</b> - XHCI0 controller disabled + ///< @li <b>TRUE</b> - XHCI0 controller enabled + + IN BOOLEAN Xhci1Enable; ///< XHCI1 controller function + ///< @li <b>FALSE</b> - XHCI1 controller disabled + ///< @li <b>TRUE</b> - XHCI1 controller enabled +} FCH_RESET_INTERFACE; + + +/// +/// FCH Component Data Structure from InitEnv stage +/// +typedef struct { + IN SD_MODE SdConfig; ///< Secure Digital (SD) controller mode + IN HDA_CONFIG AzaliaController; ///< Azalia HD Audio Controller + + IN IR_CONFIG IrConfig; ///< Infrared (IR) Configuration + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN SATA_CLASS SataClass; ///< SATA controller mode + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN SataIdeMode; ///< Native mode of SATA IDE controller + ///< @li <b>FALSE</b> - Legacy IDE mode + ///< @li <b>TRUE</b> - Native IDE mode + + IN BOOLEAN Ohci1Enable; ///< OHCI controller #1 Function + ///< @li <b>FALSE</b> - OHCI1 is disabled + ///< @li <b>TRUE</b> - OHCI1 is enabled + + IN BOOLEAN Ohci2Enable; ///< OHCI controller #2 Function + ///< @li <b>FALSE</b> - OHCI2 is disabled + ///< @li <b>TRUE</b> - OHCI2 is enabled + + IN BOOLEAN Ohci3Enable; ///< OHCI controller #3 Function + ///< @li <b>FALSE</b> - OHCI3 is disabled + ///< @li <b>TRUE</b> - OHCI3 is enabled + + IN BOOLEAN Ohci4Enable; ///< OHCI controller #4 Function + ///< @li <b>FALSE</b> - OHCI4 is disabled + ///< @li <b>TRUE</b> - OHCI4 is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN POWER_FAIL FchPowerFail; ///< FCH power failure option +} FCH_INTERFACE; + + +/*---------------------------------------------------------------------------- + * CPU Feature related info + *---------------------------------------------------------------------------- + */ +/// Build Configuration values for BLDCFG_PLATFORM_CONNECTED_STANDBY_MODE +typedef enum { + ConnectedStandbyAuto = 0, ///< Auto + ConnectedStandbyDisabled = 1, ///< Disabled + MaxConnectedStandbyMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CONNECTED_STANDBY_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE +typedef enum { + CStateModeDisabled = 0, ///< Disabled + CStateModeC6 = 1, ///< C6 State + MaxCStateMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CSTATE_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE +typedef enum { + CpbModeAuto = 0, ///< Auto + CpbModeDisabled = 1, ///< Disabled + MaxCpbMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CPB_MODES; + +/// Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE +typedef enum { + LOW_POWER_PSTATE_FOR_PROCHOT_AUTO = 0, ///< Auto + LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE = 1, ///< Disabled + MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE = 2 ///< Not a valid value, used for verifying input +} PLATFORM_LOW_POWER_PSTATE_MODES; + +/// Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY +#define PsdPolicyProcessorDefault 0 ///< PSD is dependent or independent per processor default +#define PsdPolicyDependent 1 ///< PSD is forced dependent +#define PsdPolicyIndependent 2 ///< PSD is forced independent +#define PsdPolicyMax 3 ///< Not a valid value, used for verifying input + +/*---------------------------------------------------------------------------- + * GNB PCIe configuration info + *---------------------------------------------------------------------------- + */ + +// Event definitions + +#define GNB_EVENT_INVALID_CONFIGURATION 0x20010000ul // User configuration invalid +#define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001ul // Requested lane allocation for PCIe port can not be supported +#define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION 0x20010002ul // Requested incorrect PCIe port device address +#define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION 0x20010003ul // Incorrect parameter in DDI link configuration +#define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION 0x20010004ul // Invalid with for PCIe port or DDI link +#define GNB_EVENT_INVALID_LANES_CONFIGURATION 0x20010005ul // Lane double subscribe lanes +#define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION 0x20010006ul // Requested lane allocation for DDI link(s) can not be supported +#define GNB_EVENT_LINK_TRAINING_FAIL 0x20020000ul // PCIe Link training fail +#define GNB_EVENT_BROKEN_LANE_RECOVERY 0x20030000ul // Broken lane workaround applied to recover link training +#define GNB_EVENT_GEN2_SUPPORT_RECOVERY 0x20040000ul // Scale back to GEN1 to recover link training + + +#define DESCRIPTOR_TERMINATE_LIST 0x80000000ull +#define DESCRIPTOR_IGNORE 0x40000000ull + +/// PCIe link initialization +typedef enum { + EndpointDetect = 0, ///< Detect endpoint presence + EndpointNotPresent ///< Endpoint not present (or connected). Used in case there is alternative way to determine + ///< if device present on board or in slot. For example GPIO can be used to determine device presence. +} PCIE_ENDPOINT_STATUS; + + +/// PCIe port misc extended controls +typedef struct { + IN UINT8 LinkComplianceMode :1; ///< Force port into compliance mode (device will not be trained, port output compliance pattern) + IN UINT8 LinkSafeMode :2; /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability) + * @li @b 0 - port can advertize muximum supported capability + * @li @b 1 - port limit advertized capability and speed to PCIe Gen1 + */ + IN UINT8 SbLink :1; /**< PCIe link type + * @li @b 0 - General purpose port + * @li @b 1 - Port connected to SB + */ + IN UINT8 ClkPmSupport :1; /**< Clock Power Management Support + * @li @b 0 - Clock Power Management not configured + * @li @b 1 - Clock Power Management configured according to PCIe device capability + */ +} PCIe_PORT_MISC_CONTROL; + +/// The IO APIC Interrupt Mapping Info +typedef struct { + IN UINT8 GroupMap; /**< Group mapping for slot or endpoint device (connected to PCIE port) interrupts . + * @li <b>0</b> - IGNORE THIS STRUCTURE AND USE RECOMMENDED SETTINGS + * @li <b>1</b> - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) + * @li <b>2</b> - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) + * @li ... + * @li <b>8</b> - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) + */ + IN UINT8 Swizzle; /**< Swizzle interrupt in the Group. + * @li <b>0</b> - ABCD + * @li <b>1</b> - BCDA + * @li <b>2</b> - CDAB + * @li <b>3</b> - DABC + */ + IN UINT8 BridgeInt; /**< IOAPIC redirection table entry for PCIE bridge interrupt + * @li <b>0</b> - Entry 0 of IO APIC redirection table + * @li <b>1</b> - Entry 1 of IO APIC redirection table + * @li ... + * @li <b>31</b> - Entry 31 of IO APIC redirection table + */ +} APIC_DEVICE_INFO; + +/// Initial Offset Calibration Control +typedef enum { + ADAPT_IOC_DISABLED = 0, ///< Initial Offset Calibration Disabled + ADAPT_IOC_ENABLED ///< Initial Offset Calibration Enabled +} ADAPT_IOC_CONTROL; + +/// DFE Control values +typedef enum { + ADAPT_DFE_CONTROL_DISABLED = 0, ///< DFE Disabled + ADAPD_DFE_CONTROL_1TAP_DFE = 4, ///< 1-tap DFE + ADAPD_DFE_CONTROL_1TAP_DFE_FBF, ///< 1-tap DFE with Future Bit Filtering + ADAPD_DFE_CONTROL_2TAP_DFE, ///< 2-tap DFE + ADAPD_DFE_CONTROL_2TAP_DFE_FBF ///< 2-tap DFE with Future Bit Filtering +} ADAPT_DFE_CONTROL; + +/// LEQ Control values +typedef enum { + ADAPT_LEQ_CONTROL_DISABLED = 0, ///< LEQ Disabled + ADAPT_LEQ_CONTROL_DC_GAIN = 2, ///< DC Gain Adaptation + ADAPT_LEQ_CONTROL_DC_GAIN_POLE ///< DC Gain and Pole Adaptation +} ADAPT_LEQ_CONTROL; + +/// Dynamic Offset Calibration Control +typedef enum { + ADAPT_DOC_DISABLED = 0, ///< Dynamic Offset Calibration Disabled + ADAPT_DOC_ENABLED ///< Dynamic Offset Calibration Enabled +} ADAPT_DOC_CONTROL; + +/// FOM Calculation Control +typedef enum { + ADAPT_FOMC_DISABLED = 0, ///< FOM Calculation Disabled + ADAPT_FOMC_ENABLED ///< FOM Calculation Enabled +} ADAPT_FOMC_CONTROL; + +/// PI Offset Calibration Control +typedef enum { + ADAPT_PIOC_DISABLED = 0, ///< PI Offset Calibration Disabled + ADAPT_PIOC_ENABLED ///< PI Offset Calibration Enabled +} ADAPT_PIOC_CONTROL; + +/// GEN3 RxAdaptMode Configuration Structure +typedef struct { + IN BOOLEAN InitOffsetCancellation; ///< Initial Offset Cancellation Enable + IN UINT8 DFEControl; ///< DFE Control + IN UINT8 LEQControl; ///< LEQ Control + IN BOOLEAN DynamicOffsetCalibration; ///< Dynamic Offset Calibration Enable + IN BOOLEAN FOMCalculation; ///< FOM Calculation Enable + IN BOOLEAN PIOffsetCalibration; ///< PI Offset Calibratino Enable +} RX_ADAPT_MODE; + +/// PCIe port configuration data +typedef struct { + IN UINT8 PortPresent; ///< Enable PCIe port for initialization. + IN UINT8 ChannelType; /**< Channel type. + * @li @b 0 - "lowLoss", + * @li @b 1 - "highLoss", + * @li @b 2 - "mob0db", + * @li @b 3 - "mob3db", + * @li @b 4 - "extnd6db" + * @li @b 5 - "extnd8db" + */ + IN UINT8 DeviceNumber; /**< PCI Device number for port. + * @li @b 0 - Native port device number + * @li @b N - Port device number (See available configurations in BKDG + */ + IN UINT8 FunctionNumber; ///< Reserved for future use + IN UINT8 LinkSpeedCapability; /**< PCIe link speed/ + * @li @b 0 - Maximum supported by silicon + * @li @b 1 - Gen1 + * @li @b 2 - Gen2 + * @li @b 3 - Gen3 + */ + IN UINT8 LinkAspm; /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM) + * @li @b 0 - Disabled + * @li @b 1 - L0s only + * @li @b 2 - L1 only + * @li @b 3 - L0s and L1 + */ + IN UINT8 LinkHotplug; /**< Hotplug control. + * @li @b 0 - Disabled + * @li @b 1 - Basic + * @li @b 2 - Server + * @li @b 3 - Enhanced + */ + IN UINT8 ResetId; /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO + * identification which control reset for given port. + * Each port with unique GPIO should have unique ResetId assigned. + * All ports use same GPIO to control reset should have same ResetId assigned. + * see AgesaPcieSlotResetContol. + */ + IN PCIe_PORT_MISC_CONTROL MiscControls; ///< Misc extended controls + IN APIC_DEVICE_INFO ApicDeviceInfo; ///< IOAPIC device programming info + IN PCIE_ENDPOINT_STATUS EndpointStatus; ///< PCIe endpoint (device connected to PCIe port) status + IN RX_ADAPT_MODE RxAdaptMode; ///< Gen3 RxAdaptMode configuration +} PCIe_PORT_DATA; + +/// DDI channel lane mapping +typedef struct { ///< Structure that discribe lane mapping + IN UINT8 Lane0 :2; /**< Lane 0 mapping + * @li @b 0 - Map to lane 0 + * @li @b 1 - Map to lane 1 + * @li @b 2 - Map to lane 2 + * @li @b 3 - Map to lane 3 + */ + IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") + IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") + IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") +} CHANNEL_MAPPING; ///< Lane mapping + +/// Common Channel Mapping +typedef union { + IN UINT8 ChannelMappingValue; ///< Raw lane mapping + IN CHANNEL_MAPPING ChannelMapping; ///< Channel mapping +} CONN_CHANNEL_MAPPING; + +/// DDI Configuration data +typedef struct { + IN UINT8 ConnectorType; /**< Display Connector Type + * @li @b 0 - DP + * @li @b 1 - eDP + * @li @b 2 - Single Link DVI-D + * @li @b 3 - Dual Link DVI-D (see @ref DualLinkDviDescription "Example Dual Link DVI connector description") + * @li @b 4 - HDMI + * @li @b 5 - DP-to-VGA + * @li @b 6 - DP-to-LVDS + * @li @b 7 - Hudson-2 NutMeg DP-to-VGA + * @li @b 8 - Single Link DVI-I + * @li @b 9 - Native CRT (Family 0x14) + * @li @b 10 - Native LVDS (Family 0x14) + * @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or DP-to-LVDS + * The auto detection method only support panel with EDID. + */ + IN UINT8 AuxIndex; /**< Indicates which AUX or DDC Line is used + * @li @b 0 - AUX1 + * @li @b 1 - AUX2 + * @li @b 2 - AUX3 + * @li @b 3 - AUX4 + * @li @b 4 - AUX5 + * @li @b 5 - AUX6 + */ + IN UINT8 HdpIndex; /**< Indicates which HDP pin is used + * @li @b 0 - HDP1 + * @li @b 1 - HDP2 + * @li @b 2 - HDP3 + * @li @b 3 - HDP4 + * @li @b 4 - HDP5 + * @li @b 5 - HDP6 + */ + IN CONN_CHANNEL_MAPPING Mapping[2]; /**< Set specific mapping of lanes to connector pins + * @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane + * @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link) + * if Mapping[x] set to 0 than default mapping assumed + */ + IN UINT8 LanePnInversionMask; /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port. + * @li 0 - Do not invert (default) + * @li 1 - Invert P and N on this lane + */ + IN UINT8 Flags; /**< Capabilities flags + * @li Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 + * @li Flags bit[7:1] Reserved + */ +} PCIe_DDI_DATA; + +/// Engine Configuration +typedef struct { + IN UINT8 EngineType; /**< Engine type + * @li @b 0 - Ignore engine configuration + * @li @b 1 - PCIe port + * @li @b 2 - DDI + */ + IN UINT16 StartLane; /**< Start Lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + IN UINT16 EndLane; /**< End lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + +} PCIe_ENGINE_DATA; + +/// PCIe port descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info +} PCIe_PORT_DESCRIPTOR; + +/// DDI descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info +} PCIe_DDI_DESCRIPTOR; + +/// PCIe Complex descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in topology + */ + IN UINT32 SocketId; ///< Socket Id + IN CONST PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN CONST PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN VOID *Reserved; ///< Reserved for future use +} PCIe_COMPLEX_DESCRIPTOR; + +/// Action to control PCIe slot reset +typedef enum { + AssertSlotReset, ///< Assert slot reset + DeassertSlotReset ///< Deassert slot reset +} PCIE_RESET_CONTROL; + +///Slot Reset Info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 ResetId; ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR + IN UINT8 ResetControl; ///< Reset control as in PCIE_RESET_CONTROL +} PCIe_SLOT_RESET_INFO; + +#define GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST 0x1 + +///VBIOS image info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT VOID *ImagePtr; ///< Pointer to VBIOS image + IN PCI_ADDR GfxPciAddress; ///< PCI address of integrated graphics controller + IN UINT32 Flags; ///< BIT[0] - special repost requred +} GFX_VBIOS_IMAGE_INFO; + +/// Engine descriptor type +typedef enum { + PcieUnusedEngine = 0, ///< Unused descriptor + PciePortEngine = 1, ///< PCIe port + PcieDdiEngine = 2, ///< DDI + MaxPcieEngine ///< Max engine type for boundary check. +} PCIE_ENGINE_TYPE; + +/// PCIe link capability/speed +typedef enum { + PcieGenMaxSupported, ///< Maximum supported + PcieGen1 = 1, ///< Gen1 + PcieGen2, ///< Gen2 + PcieGen3, ///< Gen3 + MaxPcieGen ///< Max Gen for boundary check +} PCIE_LINK_SPEED_CAP; + +/// PCIe PSPP Power policy +typedef enum { + PsppDisabled, ///< PSPP disabled + PsppPerformance = 1, ///< Performance + PsppBalanceHigh, ///< Balance-High + PsppBalanceLow, ///< Balance-Low + PsppPowerSaving, ///< Power Saving + MaxPspp ///< Max Pspp for boundary check +} PCIE_PSPP_POLICY; + +/// DDI display connector type +typedef enum { + ConnectorTypeDP, ///< DP + ConnectorTypeEDP, ///< eDP + ConnectorTypeSingleLinkDVI, ///< Single Link DVI-D + ConnectorTypeDualLinkDVI, ///< Dual Link DVI-D + ConnectorTypeHDMI, ///< HDMI + ConnectorTypeDpToVga, ///< DP-to-VGA + ConnectorTypeDpToLvds, ///< DP-to-LVDS + ConnectorTypeNutmegDpToVga, ///< Hudson-2 NutMeg DP-to-VGA + ConnectorTypeSingleLinkDviI, ///< Single Link DVI-I + ConnectorTypeCrt, ///< CRT (VGA) + ConnectorTypeLvds, ///< LVDS + ConnectorTypeEDPToLvds, ///< 3rd party common eDP-to-LVDS translator chip without AMD SW init + ConnectorTypeEDPToLvdsSwInit, ///< 3rd party eDP-to-LVDS translator which requires AMD SW init + ConnectorTypeAutoDetect, ///< VBIOS auto detect connector type (native LVDS, eDP or DP-to-LVDS) + MaxConnectorType ///< Not valid value, used to verify input +} PCIE_CONNECTOR_TYPE; + +/// PCIe link channel type +typedef enum { + ChannelTypeLowLoss, ///< Low Loss + ChannelTypeHighLoss, ///< High Loss + ChannelTypeMob0db, ///< Mobile 0dB + ChannelTypeMob3db, ///< Mobile 3dB + ChannelTypeExt6db, ///< Extended 6dB + ChannelTypeExt8db, ///< Extended 8dB + MaxChannelType ///< Not valid value, used to verify input +} PCIE_CHANNEL_TYPE; + +/// PCIe link ASPM +typedef enum { + AspmDisabled, ///< Disabled + AspmL0s, ///< PCIe L0s link state + AspmL1, ///< PCIe L1 link state + AspmL0sL1, ///< PCIe L0s & L1 link state + MaxAspm ///< Not valid value, used to verify input +} PCIE_ASPM_TYPE; + +/// PCIe link hotplug support +typedef enum { + HotplugDisabled, ///< Hotplug disable + HotplugBasic, ///< Basic Hotplug + HotplugServer, ///< Server Hotplug + HotplugEnhanced, ///< Enhanced + HotplugInboard, ///< Inboard + MaxHotplug ///< Not valid value, used to verify input +} PCIE_HOTPLUG_TYPE; + +/// PCIe link initialization +typedef enum { + PortDisabled, ///< Disable + PortEnabled ///< Enable +} PCIE_PORT_ENABLE; + +/// PCIe ACS capability - Access Control Services +typedef enum { + PcieAcsDisabled, ///< Disabled + PcieAcsEnabled, ///< Enabled +} PCIE_ACS_CAP; + +/// PCIe ClkPmSupport initialization +typedef enum { + ClkPmSupportDisabled, ///< Disable + ClkPmSupportEnabled ///< Enable +} CLKPM_SUPPORT_ENABLE; + +/// DDI Aux channel +typedef enum { + Aux1, ///< Aux1 + Aux2, ///< Aux2 + Aux3, ///< Aux3 + Aux4, ///< Aux4 + Aux5, ///< Aux5 + Aux6, ///< Aux6 + MaxAux ///< Not valid value, used to verify input +} PCIE_AUX_TYPE; + +/// DDI Hdp Index +typedef enum { + Hdp1, ///< Hdp1 + Hdp2, ///< Hdp2 + Hdp3, ///< Hdp3 + Hdp4, ///< Hdp4 + Hdp5, ///< Hdp5 + Hdp6, ///< Hdp6 + MaxHdp ///< Not valid value, used to verify input +} PCIE_HDP_TYPE; + +/// PCIe_DDI_DATA.Flags definitions +#define DDI_DATA_FLAGS_DP1_1_ONLY 0x01 ///< BIT[0] Selects downgrade PHY link to DP1.1 +#define EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN 0x02 ///< BIT[1] VBIOS will always output fixed voltage swing during DP link training +/// DP receiver definitions with fixed voltage swing +typedef enum { + DP_VS_0_4V_0DB, ///< 0x00 + DP_VS_0_6V_0DB, ///< 0x01 + DP_VS_0_8V_0DB, ///< 0x02 + DP_VS_1_2V_0DB, ///< 0x03 + DP_VS_0_4V_3_5DB = 0x8, ///< 0x08 + DP_VS_0_6V_3_5DB, ///< 0x09 + DP_VS_0_8V_3_5DB, ///< 0x0a + DP_VS_0_4V_6DB = 0x10, ///< 0x10 + DP_VS_0_6V_6DB, ///< 0x11 + DP_VS_0_4V_9_5DB = 0x18 ///< 0x18 +} DP_FIXED_VOLT_SWING_TYPE; + +// Macro for statically initializing various structures +#define PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane} +#define PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \ +{mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, 0}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_V2(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_GEN3(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport, \ +mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration}} +#define PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \ +{mConnectorType, mAuxIndex, mHpdIndex, {{0},{0}}, 0, 0} +#define PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, 0} +#define PCIE_DDI_DATA_INITIALIZER_V2(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion, mFlags) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, mFlags} + +///IOMMU requestor ID +typedef struct { + IN UINT16 Bus :8; ///< Bus + IN UINT16 Device :5; ///< Device + IN UINT16 Function :3; ///< Function +} IOMMU_REQUESTOR_ID; + +/// IVMD exclusion range descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Flags[31] - Terminate descriptor array. + * @li @b Flags[30] - Ignore descriptor. + */ + IN IOMMU_REQUESTOR_ID RequestorIdStart; ///< Requestor ID start + IN IOMMU_REQUESTOR_ID RequestorIdEnd; ///< Requestor ID end (use same as start for single ID) + IN UINT64 RangeBaseAddress; ///< Phisical base address of exclusion range + IN UINT64 RangeLength; ///< Length of exclusion range in bytes +} IOMMU_EXCLUSION_RANGE_DESCRIPTOR; + +/*---------------------------------------------------------------------------- + * GNB configuration info + *---------------------------------------------------------------------------- + */ + +/// LVDS Misc Control Field +typedef struct { + IN UINT8 FpdiMode:1; ///< This item configures LVDS 888bit panel mode + ///< @li FALSE = LVDS 888 panel in LDI mode + ///< @li TRUE = LVDS 888 panel in FPDI mode + ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE} + IN UINT8 DlChSwap:1; ///< This item configures LVDS panel lower and upper link mapping + ///< @li FALSE = Lower link and upper link not swap + ///< @li TRUE = Lower link and upper link are swapped + ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP} + IN UINT8 VsyncActiveLow:1; ///< This item configures polarity of frame pulse encoded in lvds data stream + ///< @li FALSE = Active high Frame Pulse/Vsync + ///< @li TRUE = Active low Frame Pulse/Vsync + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW} + IN UINT8 HsyncActiveLow:1; ///< This item configures polarity of line pulse encoded in lvds data + ///< @li FALSE = Active high Line Pulse + ///< @li TRUE = Active low Line Pulse / Hsync + ///< @BldCfgItem{BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW} + IN UINT8 BLONActiveLow:1; ///< This item configures polarity of signal sent to digital BLON output pin + ///< @li FALSE = Not inverted(active high) + ///< @li TRUE = Inverted (active low) + ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW} + IN UINT8 LvdsVoltOverwriteEn:1; ///< This item configures polarity of DP-to-LVDS output voltage overwrite + ///< @li FALSE = DP-to-LVDS output voltage overwrite disable, use VBIOS default setting. + ///< @li TRUE = Use ucLVDSVolAdjust value to program register LVDS_CTRL_4 + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE} + IN UINT8 Reserved:2; ///< Reserved +} LVDS_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _LVDS_MISC_CONTROL { + IN LVDS_MISC_CONTROL_FIELD Field; ///< LVDS_MISC_CONTROL_FIELD + IN UINT8 Value; ///< LVDS Misc Control Value +} LVDS_MISC_CONTROL; + +/// Display Misc Control Field +typedef struct { + IN UINT8 Reserved1:3; ///< Reserved + IN UINT8 VbiosFastBootEn:1; ///< This item configures VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open. + ///< @li FALSE = VBIOS fast boot is disable. + ///< @li TRUE = VBIOS fast boot is enable. + ///< @BldCfgItem{BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE} + IN UINT8 Reserved2:4; ///< Reserved +} DISPLAY_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _DISPLAY_MISC_CONTROL { + IN DISPLAY_MISC_CONTROL_FIELD Field; ///< DISPLAY_MISC_CONTROL_FIELD + IN UINT8 Value; ///< Display Misc Control Value +} DISPLAY_MISC_CONTROL; + +/// POST Configuration settings for GNB. +typedef struct { + IN UINT8 IgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use existing default - + ///< @li 1 = Disable iGPU if any PCIe/PCI graphics card present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} +} GNB_POST_CONFIGURATION; + +/// iGPU Enable/Disable Policy values +#define IGPU_DISABLE_AUTO 0 ///< Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics +#define IGPU_DISABLE_ANY_PCIE 1 ///< Disable iGPU if any PCI or PCIE graphics card is present + +/// ENV Configuration settings for GNB. +typedef struct { + IN UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + ///< @li 0 = Stereo 3D is disabled (default). + ///< @li 1 = Use processor pin HPD1. + ///< @li 2 = Use processor pin HPD2 + ///< @li 3 = Use processor pin HPD3 + ///< @li 4 = Use processor pin HPD4 + ///< @li 5 = Use processor pin HPD5 + ///< @li 6 = Use processor pin HPD6 + ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT} + IN BOOLEAN IommuSupport; ///< IOMMU support. + ///< @li FALSE = Disabled. Disable and hide IOMMU device. + ///< @li TRUE = Initialize IOMMU subsystem. Generate ACPI IVRS table. + ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT} + IN UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN UINT8 LvdsPowerOnSeqDigonToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE} + IN UINT8 LvdsPowerOnSeqDeToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL} + IN UINT8 LvdsPowerOnSeqDeToDigon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON} + IN UINT8 LvdsPowerOnSeqVaryBlToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE} + IN UINT8 LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY} + IN UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON} + IN UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL} + IN UINT16 LvdsMaxPixelClockFreq; ///< This item configures the maximum pixel clock frequency supported. + ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ} + IN UINT32 LcdBitDepthControlValue; ///< This item configures the LCD bit depth control settings. + ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE} + IN UINT8 Lvds24bbpPanelMode; ///< This item configures the LVDS 24 BBP mode. + ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE} + IN LVDS_MISC_CONTROL LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON + IN UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN GnbRemoteDisplaySupport; ///< This item enables Wireless Display Support + ///< @li TRUE = Enable Wireless Display Support + ///< @li FALSE = Disable Wireless Display Support + ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT} + IN UINT8 LvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL DisplayMiscControl;///< This item configures display misc control + IN DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN UINT32 GpuFrequencyLimit; ///< GNB GPU Max Frequency(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} +} GNB_ENV_CONFIGURATION; + +/// Configuration settings for GNB. +typedef struct { + IN UINT8 iGpuVgaMode; ///< VGA resources decoding configuration for iGPU + ///< @li 0 = iGPU decode all VGA resources (must be primary VGA adapter) + ///< @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter) + IN UINT8 PcieAcsCapability; ///< Pcie ACS Capability support + ///< @li 0 = Disabled + ///< @li 1 = Enabled + IN UINT64 GnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} +} GNB_MID_CONFIGURATION; + +/// GNB configuration info +typedef struct { + IN const PCIe_COMPLEX_DESCRIPTOR *PcieComplexList; /**< Pointer to array of structures describe PCIe topology on each processor package or NULL. + * Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST + * Example of topology definition for single socket system: + * @code + * PCIe_PORT_DESCRIPTOR PortList [] = { + * // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * } + * }; + * PCIe_PORT_DESCRIPTOR DdiList [] = { + * // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1, 0) + * }, + * // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2, 0) + * } + * }; + * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate complexes list + * 0, //Socket ID + * &PortList[0], + * &DdiList[0], + * } + * @endcode + */ + IN UINT8 PsppPolicy; /**< PSPP (PCIe Speed Power Policy) + * @li @b 0 - Disabled + * @li @b 1 - Performance + * @li @b 2 - Balance-High + * @li @b 3 - Balance-Low + * @li @b 4 - Power Saving + */ + +} GNB_CONFIGURATION; + +/// Late Configuration settings for GNB. +typedef struct { + IN BOOLEAN DockedTdpHeadroom; ///< Docked TDP headroom + ///< @li TRUE = Enable docked TDP headroom + ///< @li FALSE = Disable docked TDP headroom + ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} + IN UINT8 GnbIoapicId; ///< GNB IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_GNB_IOAPIC_ADDRESS == NULL or BLDCFG_IOMMU_SUPPORT == NULL or GnbIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + IN UINT8 FchIoapicId; ///< Fch IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_IOMMU_SUPPORT == NULL or or FchIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + +} GNB_LATE_CONFIGURATION; + +// +// MEMORY-SPECIFIC DATA STRUCTURES +// +// +// +// +// AGESA MAXIMIUM VALUES +// +// These Max values are used to define array sizes and associated loop +// counts in the code. They reflect the maximum values that AGESA +// currently supports and does not necessarily reflect the hardware +// capabilities of configuration. +// + +#define MAX_SOCKETS_SUPPORTED 1 ///< Max number of sockets in system +#define MAX_CHANNELS_PER_SOCKET 4 ///< Max Channels per sockets +#define MAX_DIMMS_PER_CHANNEL 4 ///< Max DIMMs on a memory channel (independent of platform) +#define NUMBER_OF_DELAY_TABLES 9 ///< Number of tables defined in CH_DEF_STRUCT. + ///< Eg: UINT16 *RcvEnDlys; + ///< UINT8 *WrDqsDlys; + ///< UINT8 *RdDqsDlys; + ///< UINT8 *WrDatDlys; + ///< UINT8 *RdDqsMinDlys; + ///< UINT8 *RdDqsMaxDlys; + ///< UINT8 *WrDatMinDlys; + ///< UINT8 *WrDatMaxDlys; +#define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables + +#define MAX_PLATFORM_TYPES 16 ///< Platform types per system + +#define MCT_TRNG_KEEPOUT_START 0x00004000ul ///< base [39:8] +#define MCT_TRNG_KEEPOUT_END 0x00007FFFul ///< base [39:8] +#define DATAEYE_VREF_RANGE 31 ///< Number of VREF steps in Data Eye Bitmap + +#define UMA_ATTRIBUTE_INTERLEAVE 0x80000000ul ///< Uma Region is interleaved +#define UMA_ATTRIBUTE_ON_DCT0 0x40000000ul ///< UMA resides on memory that belongs to DCT0 +#define UMA_ATTRIBUTE_ON_DCT1 0x20000000ul ///< UMA resides on memory that belongs to DCT1 +#define UMA_ATTRIBUTE_ON_DCT2 0x10000000ul ///< UMA resides on memory that belongs to DCT2 +#define UMA_ATTRIBUTE_ON_DCT3 0x08000000ul ///< UMA resides on memory that belongs to DCT3 + +typedef UINT8 PSO_TABLE; ///< Platform Configuration Table + +// AGESA DEFINITIONS +// +// Many of these are derived from the platform and hardware specific definitions + +/// EccSymbolSize override value +#define ECCSYMBOLSIZE_USE_BKDG 0 ///< Use BKDG Recommended Value +#define ECCSYMBOLSIZE_FORCE_X4 4 ///< Force to x4 +#define ECCSYMBOLSIZE_FORCE_X8 8 ///< Force to x8 +/// CPU Package Type +#define PT_L1 0 ///< L1 Package type +#define PT_M2 1 ///< AM Package type +#define PT_S1 2 ///< S1 Package type + +/// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/// Build Configuration values for BLDCFG_TIMING_MODE_SELECT +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/// Build Configuration values for BLDCFG_POWER_DOWN_MODE +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode +#define POWER_DOWN_MODE_AUTO 2 ///< AGESA to select power down mode + +/// Build Configuration limit for BLDCFG_GNB_GPU_MAX_FREQUENCY +#define UNSUPPORTED_GPU_FREQUENCY 901 ///< Highest limit of GPU frequency + +/// Structures use to pass system Logical CPU-ID +typedef struct { + IN OUT UINT64 Family; ///< Indicates logical ID Family + IN OUT UINT64 Revision; ///< Indicates logical ID Family +} CPU_LOGICAL_ID; + +/// Structures use to report AMP status +typedef struct { + OUT BOOLEAN AmpVoltageValid; ///< Indicates if Amp voltage is valid + OUT BOOLEAN AmpSupportDetectedButNotEnabled; ///< Indicates if Amp support is detected but not enabled + OUT BOOLEAN AmpSelectedButNotEnabled; ///< Indicates if Amp is selected but not enabled +} AMP_STATUS; + +/// Normalized Critical Composite Data Eye +/// Bit 15 represents trained eye Center +/// Bit 0 represents eye center -15 delay steps +/// Bit 31 represents eye center +16 delay steps +/// Offset 0 represents +15 Vref Steps +/// Offset 31 represents -15 Vref Steps +typedef UINT32 COMPOSITE_DATAEYE[DATAEYE_VREF_RANGE]; + +/// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE +typedef enum { + AMD_PLATFORM_SERVER = 0x8000, ///< Server + AMD_PLATFORM_DESKTOP = 0x10000, ///< Desktop + AMD_PLATFORM_MOBILE = 0x20000, ///< Mobile +} AMD_PLATFORM_TYPE; + +/// Dram technology type +typedef enum { + DDR2_TECHNOLOGY, ///< DDR2 technology + DDR3_TECHNOLOGY, ///< DDR3 technology + GDDR5_TECHNOLOGY, ///< GDDR5 technology + UNSUPPORTED_TECHNOLOGY, ///< Unsupported technology +} TECHNOLOGY_TYPE; + +/// Low voltage support +typedef enum { + VOLT_INITIAL, ///< Initial value for VDDIO + VOLT1_5, ///< 1.5 Volt + VOLT1_35, ///< 1.35 Volt + VOLT1_25, ///< 1.25 Volt + VOLT_UNSUPPORTED = 0xFF ///< No common voltage found +} DIMM_VOLTAGE; + +/// AMP voltage support +typedef enum { + AMP_VOLT_RSVD, ///< Reserved + AMP_VOLT1_5, ///< 1.5 Volt + AMP_VOLT1_55, ///< 1.55 Volt + AMP_VOLT1_6, ///< 1.6 Volt + AMP_VOLT1_65, ///< 1.65 Volt + AMP_VOLT1_7, ///< 1.7 Volt + AMP_VOLT1_75, ///< 1.75 Volt + AMP_VOLT1_8, ///< 1.8 Volt + AMP_VOLT1_85, ///< 1.85 Volt + AMP_VOLT1_9, ///< 1.9 Volt + AMP_VOLT1_45 = 0x10, ///< 1.45 Volt + AMP_VOLT1_4 = 0x20, ///< 1.4 Volt + AMP_VOLT1_35 = 0x30, ///< 1.35 Volt + AMP_VOLT1_3 = 0x40, ///< 1.3 Volt + AMP_VOLT1_25 = 0x50, ///< 1.25 Volt + AMP_VOLT1_2 = 0x60 ///< 1.2 Volt +} AMP_DIMM_VOLTAGE; + +/// Build Configuration values for BLDCFG_ACP_SIZE +typedef enum { + NO_ACP_SIZE = 0x00, ///< NO ACP + ACP_SIZE_2MB = 0x20, ///< UMA 4MB aligned + ACP_SIZE_4MB = 0x40, ///< UMA 128MB aligned +} ACP_SIZE; + +/// UMA Mode +typedef enum { + UMA_NONE = 0, ///< UMA None + UMA_SPECIFIED = 1, ///< UMA Specified + UMA_AUTO = 2 ///< UMA Auto +} UMA_MODE; + +/// Force Training Mode +typedef enum { + FORCE_TRAIN_1D = 0, ///< 1D Training only + FORCE_TRAIN_2D = 1, ///< 2D Training only + FORCE_TRAIN_AUTO = 2 ///< Auto - 1D or 2D depending on configuration +} FORCE_TRAIN_MODE; + +/// PMU Training Mode +typedef enum { + PMU_TRAIN_1D = 0, ///< PMU 1D Training only + PMU_TRAIN_1D_2D_READ = 1, ///< PMU 1D and 2D Training read only + PMU_TRAIN_1D_2D = 2, ///< PMU 1D and 2D Training + PMU_TRAIN_AUTO = 3 ///< Auto - PMU Training depend on configuration +} PMU_TRAIN_MODE; + +/// The possible DRAM prefetch mode settings. +typedef enum { + DRAM_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_DRAM_PREFETCH_FOR_IO, ///< Disable DRAM prefetching for I/O requests only. + DISABLE_DRAM_PREFETCH_FOR_CPU, ///< Disable DRAM prefetching for requests from processor cores only. + DISABLE_DRAM_PREFETCHER, ///< Disable DRAM prefetching. + MAX_DRAM_FREFETCH_MODE ///< Not a DRAM prefetch mode, use for limit checking. +} DRAM_PREFETCH_MODE; + +/// Build Configuration values for BLDCFG_UMA_ALIGNMENT +typedef enum { + NO_UMA_ALIGNED = 0x00FFFFFF, ///< NO UMA aligned + UMA_4MB_ALIGNED = 0x00FFFFC0, ///< UMA 4MB aligned + UMA_128MB_ALIGNED = 0x00FFF800, ///< UMA 128MB aligned + UMA_256MB_ALIGNED = 0x00FFF000, ///< UMA 256MB aligned + UMA_512MB_ALIGNED = 0x00FFE000, ///< UMA 512MB aligned +} UMA_ALIGNMENT; + +/// +/// Global MCT Configuration Status Word (GStatus) +/// +typedef enum { + GsbMTRRshort, ///< Ran out of MTRRs while mapping memory + GsbAllECCDimms, ///< All banks of all Nodes are ECC capable + GsbDramECCDis, ///< Dram ECC requested but not enabled. + GsbSoftHole, ///< A Node Base gap was created + GsbHWHole, ///< A HW dram remap was created + GsbNodeIntlv, ///< Node Memory interleaving was enabled + GsbSpIntRemapHole, ///< Special condition for Node Interleave and HW remapping + GsbEnDIMMSpareNW, ///< Indicates that DIMM Spare can be used without a warm reset + + GsbEOL ///< End of list +} GLOBAL_STATUS_FIELD; + +/// +/// Local Error Status (DIE_STRUCT.ErrStatus[31:0]) +/// +typedef enum { + EsbNoDimms, ///< No DIMMs + EsbSpdChkSum, ///< SPD Checksum fail + EsbDimmMismatchM, ///< dimm module type(buffer) mismatch + EsbDimmMismatchT, ///< dimm CL/T mismatch + EsbDimmMismatchO, ///< dimm organization mismatch (128-bit) + EsbNoTrcTrfc, ///< SPD missing Trc or Trfc info + EsbNoCycTime, ///< SPD missing byte 23 or 25 + EsbBkIntDis, ///< Bank interleave requested but not enabled + EsbDramECCDis, ///< Dram ECC requested but not enabled + EsbSpareDis, ///< Online spare requested but not enabled + EsbMinimumMode, ///< Running in Minimum Mode + EsbNoRcvrEn, ///< No DQS Receiver Enable pass window found + EsbSmallRcvr, ///< DQS Rcvr En pass window too small (far right of dynamic range) + EsbNoDqsPos, ///< No DQS-DQ passing positions + EsbSmallDqs, ///< DQS-DQ passing window too small + EsbDCBKScrubDis, ///< DCache scrub requested but not enabled + + EsbEMPNotSupported, ///< Processor is not capable for EMP. + EsbEMPConflict, ///< EMP requested but cannot be enabled since + ///< channel interleaving, bank interleaving, or bank swizzle is enabled. + EsbEMPDis, ///< EMP requested but cannot be enabled since + ///< memory size of each DCT is not a power of two. + + EsbEOL ///< End of list +} ERROR_STATUS_FIELD; + +/// +/// Local Configuration Status (DIE_STRUCT.Status[31:0]) +/// +typedef enum { + SbRegistered, ///< All DIMMs are Registered + SbEccDimms, ///< All banks ECC capable + SbParDimms, ///< All banks Addr/CMD Parity capable + SbDiagClks, ///< Jedec ALL slots clock enable diag mode + Sb128bitmode, ///< DCT in 128-bit mode operation + Sb64MuxedMode, ///< DCT in 64-bit mux'ed mode. + Sb2TMode, ///< 2T CMD timing mode is enabled. + SbSWNodeHole, ///< Remapping of Node Base on this Node to create a gap. + SbHWHole, ///< Memory Hole created on this Node using HW remapping. + SbOver400Mhz, ///< DCT freq greater than or equal to 400MHz flag + SbDQSPosPass2, ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz + SbDQSRcvLimit, ///< Used for DQSRcvEnTrain to know we have reached the upper bound. + SbExtConfig, ///< Indicate the default setting for extended PCI configuration support + SbLrdimms, ///< All DIMMs are LRDIMMs + + SbEOL ///< End of list +} LOCAL_STATUS_FIELD; + + +///< CPU MSR Register definitions ------------------------------------------ +#define SYS_CFG 0xC0010010ul +#define TOP_MEM 0xC001001Aul +#define TOP_MEM2 0xC001001Dul +#define HWCR 0xC0010015ul +#define NB_CFG 0xC001001Ful + +#define FS_BASE 0xC0000100ul +#define IORR0_BASE 0xC0010016ul +#define IORR0_MASK 0xC0010017ul +#define BU_CFG 0xC0011023ul +#define BU_CFG2 0xC001102Aul +#define COFVID_STAT 0xC0010071ul +#define TSC 0x10 + +//----------------------------------------------------------------------------- +/// +/// SPD Data for each DIMM. +/// +typedef struct _SPD_DEF_STRUCT { + IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid + IN UINT8 Data[256]; ///< Buffer for 256 Bytes of SPD data from DIMM +} SPD_DEF_STRUCT; + + +//----------------------------------------------------------------------------- +/// +/// VDDP_VDDR Voltage Info for Low Power DIMM +/// +typedef struct _VDDP_VDDR_VOLTAGE { + IN BOOLEAN IsValid; ///< Indicates if daata is valid + IN MEMORY_PHY_VOLTAGE Voltage; ///< VDDP VDDR Voltage Value +} VDDP_VDDR_VOLTAGE; + +/// +/// Channel Definition Structure. +/// This data structure defines entries that are specific to the channel initialization +/// +typedef struct _CH_DEF_STRUCT { + OUT UINT8 ChannelID; ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) + OUT TECHNOLOGY_TYPE TechType; ///< Technology type of this channel + OUT UINT8 ChDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + + OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel. + OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel. + OUT SPD_DEF_STRUCT *SpdPtr; ///< Pointer to the SPD data for this channel. (Setup by NB Constructor) + OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to + ///< SPD Data for each Dimm. (Setup by Tech Block Constructor) + OUT UINT8 ChDimmValid; ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. + ///< + OUT UINT8 RegDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. + OUT UINT8 LrDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. + OUT UINT8 SODimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved. + OUT UINT8 Loads; ///< Number of devices loading bus + OUT UINT8 Dimms; ///< Number of DIMMs loading Channel + OUT UINT8 Ranks; ///< Number of ranks loading Channel DATA + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + OUT BOOLEAN SlowModePs1; ///< 1T or 2T CMD mode (slow access mode) for Mem Pstate 1 + ///< FALSE = 1T + ///< TRUE = 2T + ///< The following pointers will be pointed to dynamically allocated buffers. + ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. + ///< Example: If DIMM and Byte based training, then + ///< XX is a value in Hex + ///< BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE + ///< Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX + ///< Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX + OUT UINT16 *RcvEnDlys; ///< DQS Receiver Enable Delays + OUT UINT8 *WrDqsDlys; ///< Write DQS delays (only valid for DDR3) + OUT UINT8 *RdDqsDlys; ///< Read Dqs delays + OUT UINT8 *WrDatDlys; ///< Write Data delays + OUT UINT8 *RdDqs2dDlys; ///< 2d Read DQS data + OUT UINT8 *RdDqsMinDlys; ///< Minimum Window for Read DQS + OUT UINT8 *RdDqsMaxDlys; ///< Maximum Window for Read DQS + OUT UINT8 *WrDatMinDlys; ///< Minimum Window for Write data + OUT UINT8 *WrDatMaxDlys; ///< Maximum Window for Write data + OUT UINT16 *RcvEnDlysMemPs1; ///< DQS Receiver Enable Delays for Mem Pstate 1 + OUT UINT8 *WrDqsDlysMemPs1; ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1 + OUT UINT8 *RdDqsDlysMemPs1; ///< Read Dqs delays for Memory Pstate 1 + OUT UINT8 *WrDatDlysMemPs1; ///< Write Data delays for Memory Pstate 1 + OUT UINT8 *RdDqs2dDlysMemPs1; ///< 2d Read DQS data for Memory Pstate 1 + OUT UINT8 *RdDqsMinDlysMemPs1; ///< Minimum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *RdDqsMaxDlysMemPs1; ///< Maximum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *WrDatMinDlysMemPs1; ///< Minimum Window for Write data for Memory Pstate 1 + OUT UINT8 *WrDatMaxDlysMemPs1; ///< Maximum Window for Write data for Memory Pstate 1 + OUT UINT8 RowCount; ///< Number of rows of the allocated buffer. + OUT UINT8 ColumnCount; ///< Number of columns of the allocated buffer. + OUT UINT8 *FailingBitMask; ///< Table of masks to Track Failing bits + OUT UINT8 *FailingBitMaskMemPs1; ///< Table of masks to Track Failing bits for Memory Pstate 1 + OUT VOID *RdDataEyes; ///< Pointer to Read Data Eye Bitmaps + OUT VOID *WrDataEyes; ///< Pointer to Write Data Eye Bitmaps + OUT UINT32 DctOdcCtl; ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) + OUT UINT32 DctAddrTmg; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) + OUT UINT32 DctAddrTmgPs1; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) for Mem Pstate 1 + OUT UINT32 PhyRODTCSLow; ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) + OUT UINT32 PhyRODTCSHigh; ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) + OUT UINT32 PhyWODTCSLow; ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) + OUT UINT32 PhyWODTCSHigh; ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) + OUT UINT8 PhyWLODT[4]; ///< Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) + OUT UINT16 DctEccDqsLike; ///< DCT DQS ECC UINT8 like... + OUT UINT8 DctEccDqsScale; ///< DCT DQS ECC UINT8 scale + OUT UINT16 PtrPatternBufA; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT16 PtrPatternBufB; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT8 ByteLane; ///< Current UINT8 Lane (0..7) + OUT UINT8 Direction; ///< Current DQS-DQ training write direction (0=read, 1=write) + OUT UINT8 Pattern; ///< Current pattern + OUT UINT8 DqsDelay; ///< Current DQS delay value + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT16 DctMaxRdLat[4]; ///< Max Read Latency (ns) for the DCT + ///< DctMaxRdLat [i] is for NBPstate i + OUT UINT8 DIMMValidCh; ///< DIMM# in CH + OUT UINT8 MaxCh; ///< Max number of CH in system + OUT UINT8 Dct; ///< Dct pointer + OUT UINT8 WrDatGrossH; ///< Write Data Gross delay high value + OUT UINT8 DqsRcvEnGrossL; ///< DQS Receive Enable Gross Delay low + + OUT UINT8 TrwtWB; ///< Non-SPD timing value for TrwtWB + OUT UINT8 CurrRcvrDctADelay; ///< for keep current RcvrEnDly + OUT UINT16 T1000; ///< get the T1000 figure (cycle time (ns) * 1K) + OUT UINT8 DqsRcvEnPass; ///< for TrainRcvrEn UINT8 lane pass flag + OUT UINT8 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag + OUT UINT8 SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training + + OUT UINT8 ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory + OUT UINT32 NodeSysBase; ///< for channel interleave usage + OUT UINT8 RefRawCard[MAX_DIMMS_PER_CHANNEL]; ///< Array of rawcards detected + OUT UINT8 CtrlWrd02[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 2 values per DIMM + OUT UINT8 CtrlWrd03[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 3 values per DIMM + OUT UINT8 CtrlWrd04[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 4 values per DIMM + OUT UINT8 CtrlWrd05[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 5 values per DIMM + OUT UINT8 CtrlWrd08[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 8 values per DIMM + + OUT UINT16 CsPresentDCT; ///< For each bit n 0..7, 1 = Chip-select n is present + OUT UINT8 DimmMirrorPresent; ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT8 DimmSpdCse; ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT8 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT8 DimmYr06; ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006 + OUT UINT8 DimmWk2406; ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) + OUT UINT8 DimmPlPresent; ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. + OUT UINT8 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT8 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present + OUT UINT8 Dimmx4Present; ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx8Present; ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx16Present; ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. + OUT UINT8 LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs + OUT UINT8 LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration + OUT UINT8 LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm. + OUT UINT8 DimmNibbleAccess; ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. + OUT UINT8 *MemClkDisMap; ///< This pointer will be set to point to an array that describes + ///< the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will + ///< base on this array to disable unused MemClk to save power. + ///< + ///< The array must have 8 entries. Each entry, which associates with + ///< one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. + ///< Example: + ///< BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package + ///< is like below: + ///< Bit AM3/S1g3 pin name + ///< 0 M[B,A]_CLK_H/L[0] + ///< 1 M[B,A]_CLK_H/L[1] + ///< 2 M[B,A]_CLK_H/L[2] + ///< 3 M[B,A]_CLK_H/L[3] + ///< 4 M[B,A]_CLK_H/L[4] + ///< 5 M[B,A]_CLK_H/L[5] + ///< 6 M[B,A]_CLK_H/L[6] + ///< 7 M[B,A]_CLK_H/L[7] + ///< And platform has the following routing: + ///< CS0 M[B,A]_CLK_H/L[4] + ///< CS1 M[B,A]_CLK_H/L[2] + ///< CS2 M[B,A]_CLK_H/L[3] + ///< CS3 M[B,A]_CLK_H/L[5] + ///< Then MemClkDisMap should be pointed to the following array: + ///< CLK_2 CLK_3 CLK_4 CLK_5 + ///< 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 + ///< Each entry of the array is the bitmask of 8 chip selects. + + OUT UINT8 *CKETriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of CKE pins to the DIMMs' ranks. + ///< The array must have 2 entries. Each entry, which associates with + ///< one CKE pin, is a bitmap of 8 CS that that CKE is routed to. + ///< AGESA will base on this array to disable unused CKE pins to save power. + + OUT UINT8 *ODTTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of ODT pins to the DIMMs' ranks. + ///< The array must have 4 entries. Each entry, which associates with + ///< one ODT pin, is a bitmap of 8 CS that that ODT is routed to. + ///< AGESA will base on this array to disable unused ODT pins to save power. + + OUT UINT8 *ChipSelTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of chip select pins to the DIMMs' ranks. + ///< The array must have 8 entries. Each entry is a bitmap of 8 CS. + ///< AGESA will base on this array to disable unused Chip select pins to save power. + + OUT BOOLEAN ExtendTmp; ///< If extended temperature is supported on all dimms on a channel. + + OUT UINT8 MaxVref; ///< Maximum Vref Value for channel + + OUT UINT8 Reserved[100]; ///< Reserved +} CH_DEF_STRUCT; + +/// +/// DCT Channel Timing Parameters. +/// This data structure sets timings that are specific to the channel. +/// +typedef struct _CH_TIMING_STRUCT { + OUT UINT16 DctDimmValid; ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. + OUT UINT16 DimmMirrorPresent; ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT16 DimmSpdCse; ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT16 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT16 CsPresent; ///< For each bit n 0..7, 1=Chip-select n is present + OUT UINT16 CsEnabled; ///< For each bit n 0..7, 1=Chip-select n is enabled + OUT UINT16 CsTestFail; ///< For each bit n 0..7, 1=Chip-select n is present but disabled + OUT UINT16 CsTrainFail; ///< Bitmap showing which chipselects failed training + OUT UINT16 DIMM1KPage; ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved + OUT UINT16 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT16 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved + OUT UINT16 Dimmx4Present; ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved + OUT UINT16 Dimmx8Present; ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved + OUT UINT16 Dimmx16Present; ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved + + OUT UINT16 DIMMTrcd; ///< Minimax Trcd*40 (ns) of DIMMs + OUT UINT16 DIMMTrp; ///< Minimax Trp*40 (ns) of DIMMs + OUT UINT16 DIMMTrtp; ///< Minimax Trtp*40 (ns) of DIMMs + OUT UINT16 DIMMTras; ///< Minimax Tras*40 (ns) of DIMMs + OUT UINT16 DIMMTrc; ///< Minimax Trc*40 (ns) of DIMMs + OUT UINT16 DIMMTwr; ///< Minimax Twr*40 (ns) of DIMMs + OUT UINT16 DIMMTrrd; ///< Minimax Trrd*40 (ns) of DIMMs + OUT UINT16 DIMMTwtr; ///< Minimax Twtr*40 (ns) of DIMMs + OUT UINT16 DIMMTfaw; ///< Minimax Tfaw*40 (ns) of DIMMs + OUT UINT16 TargetSpeed; ///< Target DRAM bus speed in MHz + OUT UINT16 Speed; ///< DRAM bus speed in MHz + ///< 400 (MHz) + ///< 533 (MHz) + ///< 667 (MHz) + ///< 800 (MHz) + ///< and so on... + OUT UINT8 CasL; ///< CAS latency DCT setting (busclocks) + OUT UINT8 Trcd; ///< DCT Trcd (busclocks) + OUT UINT8 Trp; ///< DCT Trp (busclocks) + OUT UINT8 Trtp; ///< DCT Trtp (busclocks) + OUT UINT8 Tras; ///< DCT Tras (busclocks) + OUT UINT8 Trc; ///< DCT Trc (busclocks) + OUT UINT8 Twr; ///< DCT Twr (busclocks) + OUT UINT8 Trrd; ///< DCT Trrd (busclocks) + OUT UINT8 Twtr; ///< DCT Twtr (busclocks) + OUT UINT8 Tfaw; ///< DCT Tfaw (busclocks) + OUT UINT8 Trfc0; ///< DCT Logical DIMM0 Trfc + ///< 0 = 75ns (for 256Mb devs) + ///< 1 = 105ns (for 512Mb devs) + ///< 2 = 127.5ns (for 1Gb devs) + ///< 3 = 195ns (for 2Gb devs) + ///< 4 = 327.5ns (for 4Gb devs) + OUT UINT8 Trfc1; ///< DCT Logical DIMM1 Trfc (see Trfc0 for format) + OUT UINT8 Trfc2; ///< DCT Logical DIMM2 Trfc (see Trfc0 for format) + OUT UINT8 Trfc3; ///< DCT Logical DIMM3 Trfc (see Trfc0 for format) + OUT UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT. + ///< + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + ///< FALSE = 1T + ///< TRUE = 2T + OUT UINT8 TrwtTO; ///< DCT TrwtTO (busclocks) + OUT UINT8 Twrrd; ///< DCT Twrrd (busclocks) + OUT UINT8 Twrwr; ///< DCT Twrwr (busclocks) + OUT UINT8 Trdrd; ///< DCT Trdrd (busclocks) + OUT UINT8 TrwtWB; ///< DCT TrwtWB (busclocks) + OUT UINT8 TrdrdSD; ///< DCT TrdrdSD (busclocks) + OUT UINT8 TwrwrSD; ///< DCT TwrwrSD (busclocks) + OUT UINT8 TwrrdSD; ///< DCT TwrrdSD (busclocks) + OUT UINT16 MaxRdLat; ///< Max Read Latency + OUT UINT8 WrDatGrossH; ///< Temporary variables must be removed + OUT UINT8 DqsRcvEnGrossL; ///< Temporary variables must be removed +} CH_TIMING_STRUCT; + +/// +/// Data for each DCT. +/// This data structure defines data used to configure each DRAM controller. +/// +typedef struct _DCT_STRUCT { + OUT UINT8 Dct; ///< Current Dct + OUT CH_TIMING_STRUCT Timings; ///< Channel Timing structure + OUT CH_TIMING_STRUCT *TimingsMemPs1; ///< Pointed to channel timing structure for memory Pstate 1 + OUT CH_DEF_STRUCT *ChData; ///< Pointed to a dynamically allocated array of Channel structures + OUT UINT8 ChannelCount; ///< Number of channel per this DCT + OUT BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT + OUT UINT8 BankAddrMap; ///< Bank Address Mapping + OUT UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT +} DCT_STRUCT; + + +/// +/// Data Structure defining each Die. +/// This data structure contains information that is used to configure each Die. +/// +typedef struct _DIE_STRUCT { + + /// Advanced: + + OUT UINT8 NodeId; ///< Node ID of current controller + OUT UINT8 SocketId; ///< Socket ID of this Die + OUT UINT8 DieId; ///< ID of this die relative to the socket + OUT PCI_ADDR PciAddr; ///< Pci bus and device number of this controller. + OUT AGESA_STATUS ErrCode; ///< Current error condition of Node + ///< 0x0 = AGESA_SUCCESS + ///< 0x1 = AGESA_UNSUPPORTED + ///< 0x2 = AGESA_BOUNDS_CHK + ///< 0x3 = AGESA_ALERT + ///< 0x4 = AGESA_WARNING + ///< 0x5 = AGESA_ERROR + ///< 0x6 = AGESA_CRITICAL + ///< 0x7 = AGESA_FATAL + ///< + OUT BOOLEAN ErrStatus[EsbEOL]; ///< Error Status bit Field + ///< + OUT BOOLEAN Status[SbEOL]; ///< Status bit Field + ///< + OUT UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. + ///< + OUT UINT32 NodeSysBase; ///< Base[47:16] (system address) DRAM base address of this Node. + ///< + OUT UINT32 NodeHoleBase; ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node + ///< + OUT UINT32 NodeSysLimit; ///< Base[47:16] (system address) DRAM limit address of this Node. + ///< + OUT UINT32 DimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + ///< + OUT UINT32 DimmValid; ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured + OUT UINT32 RegDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is registered DIMM + OUT UINT32 LrDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM + OUT UINT32 DimmEccPresent; ///< For each bit n 0..7, 1 = DIMM n is ECC capable. + OUT UINT32 DimmParPresent; ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. + ///< + OUT UINT16 DimmTrainFail; ///< Bitmap showing which dimms failed training + OUT UINT16 ChannelTrainFail; ///< Bitmap showing the channel information about failed Chip Selects + ///< 0 in any bit field indicates Channel 0 + ///< 1 in any bit field indicates Channel 1 + OUT UINT8 Dct; ///< Need to be removed + ///< DCT pointer + OUT BOOLEAN GangedMode; ///< Ganged mode + ///< 0 = disabled + ///< 1 = enabled + OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node + ///< + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT8 MLoad; ///< Need to be removed + ///< Number of devices loading MAA bus + ///< + OUT UINT8 MaxAsyncLat; ///< Legacy wrapper + ///< + OUT UINT8 ChbD3Rcvrdly; ///< Legacy wrapper + ///< + OUT UINT16 ChaMaxRdLat; ///< Max Read Latency (ns) for DCT 0 + ///< + OUT UINT8 ChbD3BcRcvrdly; ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay + + OUT DCT_STRUCT *DctData; ///< Pointed to a dynamically allocated array of DCT_STRUCTs + OUT UINT8 DctCount; ///< Number of DCTs per this Die + OUT UINT8 Reserved[16]; ///< Reserved +} DIE_STRUCT; + +/********************************************************************** + * S3 Support structure + **********************************************************************/ +/// AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure +typedef struct { + OUT UINT32 Signature; ///< "ASTR" for AMD Suspend-To-RAM + OUT UINT16 Version; ///< S3 Params version number + IN OUT UINT32 Flags; ///< Indicates operation + IN OUT VOID *NvStorage; ///< Pointer to memory critical save state data + IN OUT UINT32 NvStorageSize; ///< Size in bytes of the NvStorage region + IN OUT VOID *VolatileStorage; ///< Pointer to remaining AMD save state data + IN OUT UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region +} AMD_S3_PARAMS; + +///=============================================================================== +/// MEM_PARAMETER_STRUCT +/// This data structure is used to pass wrapper parameters to the memory configuration code +/// +typedef struct _MEM_PARAMETER_STRUCT { + + // Basic (Return parameters) + // (This section contains the outbound parameters from the memory init code) + + OUT BOOLEAN GStatus[GsbEOL]; ///< Global Status bitfield. + ///< + OUT UINT32 HoleBase; ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. + ///< + OUT UINT32 Sub4GCacheTop; ///< If not zero, the 32-bit top of cacheable memory. + ///< + OUT UINT32 Sub1THoleBase; ///< If not zero Base[47:16] (system address) of sub 1TB dram hole. + ///< + OUT UINT32 SysLimit; ///< Limit[47:16] (system address). + ///< + OUT DIMM_VOLTAGE DDR3Voltage; ///< Find support voltage and send back to platform BIOS. + ///< + OUT VDDP_VDDR_VOLTAGE VddpVddrVoltage; ///< For a given configuration, request is made to change the VDDP/VDDR + ///< voltage in platform BIOS via AgesaHookBeforeDramInit callout and + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage parameter if + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.IsValid is TRUE. The + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage is defined in + ///< MEMORY_PHY_VOLTAGE + OUT UINT8 ExternalVrefValue; ///< Target reference voltage for external Vref for 2D training + ///< + OUT struct _MEM_DATA_STRUCT *MemData; ///< Access to global memory init data. + + // Advanced (Optional parameters) + // Optional (all defaults values will be initialized by the + // 'AmdMemInitDataStructDef' based on AMD defaults. It is up + // to the IBV/OEM to change the defaults after initialization + // but prior to the main entry to the memory code): + + // Memory Map/Mgt. + + IN UINT16 BottomIo; ///< Bottom of 32-bit IO space (8-bits). + ///< NV_BOTTOM_IO[7:0]=Addr[31:24] + ///< + IN BOOLEAN MemHoleRemapping; ///< Memory Hole Remapping (1-bit). + ///< FALSE = disable + ///< TRUE = enable + ///< + IN BOOLEAN LimitMemoryToBelow1Tb;///< Limit memory address space to below 1 TB + ///< FALSE = disable + ///< TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB} + + + // Dram Timing + + IN UINT32 UserTimingMode; ///< User Memclock Mode. + ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT} + + IN UINT32 MemClockValue; ///< Memory Clock Value. + ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT} + + + // Dram Configuration + + IN BOOLEAN EnableBankIntlv; ///< Dram Bank (chip-select) Interleaving (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING} + + IN BOOLEAN EnableNodeIntlv; ///< Node Memory Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING} + + IN BOOLEAN EnableChannelIntlv; ///< Channel Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING} + // DllPDBypassMode + + IN BOOLEAN EnableDllPDBypassMode;///< Enable low-power DDR phy operation. This feature is used for low-power + ///< solder-down DRAM motherboard designs with route matched CK/DQS/DQ signals. + ///< It limits maximim achieveable DDR rates on the platform and should not be + ///< enabled for systems requiring high DDR rate operation and/or DIMM-based systems. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_DDR_PHY_DLL_BYPASS_MODE} + // ECC + + IN BOOLEAN EnableEccFeature; ///< enable ECC error to go into MCE. + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE} + // Dram Power + + IN BOOLEAN EnablePowerDown; ///< CKE based power down mode (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE =enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN} + + // Online Spare + + IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0. + ///< - FALSE = disable Spare (default) + ///< - TRUE = enable Spare + ///< + ///< @BldCfgItem{BLDCFG_ONLINE_SPARE} + + IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings. + + IN PSO_TABLE *PlatformMemoryConfiguration; + ///< A table that contains platform specific settings. + ///< For example, MemClk routing, the number of DIMM slots per channel, .... + ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that + ///< contains default conservative settings. Platform BIOS can either tweak + ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. + ///< + IN BOOLEAN EnableParity; ///< Parity control. + ///< - TRUE = enable + ///< - FALSE = disable (default) + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE} + + IN BOOLEAN EnableBankSwizzle; ///< BankSwizzle control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE} + + ///< + + IN BOOLEAN EnableMemClr; ///< Memory Clear functionality control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + + // Uma Configuration + + IN UMA_MODE UmaMode; ///< Uma Mode + ///< 0 = None + ///< 1 = Specified + ///< 2 = Auto + IN OUT UINT32 UmaSize; ///< The size of shared graphics dram (16-bits) + ///< NV_UMA_Size[31:0]=Addr[47:16] + ///< + OUT UINT32 UmaBase; ///< The allocated Uma base address (32-bits) + ///< NV_UMA_Base[31:0]=Addr[47:16] + ///< + + /// Memory Restore Feature + + IN BOOLEAN MemRestoreCtl; ///< Memory context restore control + ///< FALSE = perform memory init as normal (AMD default) + ///< TRUE = restore memory context and skip training. This requires + ///< MemContext is valid before AmdInitPost + ///< + IN BOOLEAN SaveMemContextCtl; ///< Control switch to save memory context at the end of MemAuto + ///< TRUE = AGESA will setup MemContext block before exit AmdInitPost + ///< FALSE = AGESA will not setup MemContext block. Platform is + ///< expected to call S3Save later in POST if it wants to + ///< use memory context restore feature. + ///< + IN OUT AMD_S3_PARAMS MemContext; ///< Memory context block describes the data that platform needs to + ///< save and restore for memory context restore feature to work. + ///< It uses the subset of S3Save block to save/restore. Hence platform + ///< may save only S3 block and uses it for both S3 resume and + ///< memory context restore. + ///< - If MemRestoreCtl is TRUE, platform needs to pass in MemContext + ///< before AmdInitPost. + ///< - If SaveMemContextCtl is TRUE, platform needs to save MemContext + ///< right after AmdInitPost. + ///< + IN BOOLEAN IsCapsuleMode; ///< Capsule reboot control + ///< FALSE = This is not a capsule reboot. + ///< TRUE = This is a capsule reboot. + ///< + IN BOOLEAN ExternalVrefCtl; ///< Control the use of external Vref + ///< TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list + ///< to change the vref + ///< FALSE = AGESA will will use the internal vref control. + ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE} + ///< + IN FORCE_TRAIN_MODE ForceTrainMode; ///< Training Mode + ///< 0 = Force 1D Training for all configurations + ///< 1 = Force 2D Training for all configurations + ///< 2 = Auto - AGESA will control 1D or 2D + IN TECHNOLOGY_TYPE DimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + ///< DDR3_TECHNOLOGY = Use DDR3 DIMMs + ///< GDDR5_TECHNOLOGY = Use GDDR5 DIMMs + ///< UNSUPPORTED_TECHNOLOGY = Exit with fatal error when DDR3 and GDDR5 DIMMs + ///< are installed on the same system + ///< @BldCfgItem{BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG} + IN BOOLEAN AmpEnable; ///< AMP functionality control + ///< TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA + ///< detects if memory is capable of it + ///< FALSE = Disable, there is no request to enable memory overclocking function + ///< + IN BOOLEAN AmpWarningMsgEnable; ///< AMP warning messages control + ///< TRUE = Enable to log the warning messages of AMP + ///< FALSE = Disable + ///< + OUT AMP_STATUS AmpStatus; ///< AMP status allows platform BIOS to check which voltage or warning message it should + ///< use/apply. + ///< + ///< AmpVoltageValid : + ///< TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment + ///< FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment + ///< + ///< AmpSupportDetectedButNotEnabled : + ///< TRUE - Display warning message of "AMP support detected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< AmpSelectedButNotEnabled : + ///< TRUE - Display warning message of "AMP selected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< Note that both of warning message status reports are controlled by AmpWarningMsgEnable + ///< + OUT AMP_DIMM_VOLTAGE AmpVoltage; ///< AMP voltage which will be sent back to platform BIOS, and + ///< the value in AmpVoltage is valid only if AmpStatus is TRUE returned + IN BOOLEAN DataEyeEn; ///< Get 2D training data eye + ///< TRUE = Enable to get the 2D data eye + ///< FALSE = The 2D data eye is not enabled + ///< @BldCfgItem{BLDCFG_ENABLE_DATA_EYE} + IN BOOLEAN DramDoubleRefreshRate;///< Specify the average time between refresh requests to all DRAM devices. + ///< TRUE = 2x refresh rate. + ///< FALSE = 1x refresh rate. + ///< @BldCfgItem{BLDCFG_DRAM_DOUBLE_REFRESH_RATE} + IN PMU_TRAIN_MODE PmuTrainMode; ///< PMU Training Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + ///< 0 = PMU 1D Training only for all configurations + ///< 1 = PMU 1D and 2D Training read only for all configurations + ///< 2 = PMU 1D and 2D Training for all configurations + ///< 3 = AGESA control type of training depend on configurations +} MEM_PARAMETER_STRUCT; + + +/// +/// Function definition. +/// This data structure passes function pointers to the memory configuration code. +/// The wrapper can use this structure with customized versions. +/// +typedef struct _MEM_FUNCTION_STRUCT { + + // PUBLIC required Internal functions + + IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData); ///< Proc for Unbuffered DIMMs, platform specific + IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData); ///< Proc for Registered DIMMs, platform specific + + // PUBLIC optional functions + + IN OUT VOID (*amdMemEccInit) (VOID *pMemData); ///< NB proc for ECC feature + IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature + IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData); ///< NB proc for Channel interleave feature + IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData); ///< NB proc for Node interleave feature + IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData); ///< NB proc for parallel training feature + IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData); ///< NB code for early sample support feature + IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData); ///< NB code for 'multi-part' + IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData); ///< NB code for On-Line Spare feature + IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData); ///< NB code for UDIMMs + IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData); ///< NB code for RDIMMs + IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData); ///< NB code for LRDIMMs + IN OUT UINT32 Reserved[100]; ///< Reserved for later function definition +} MEM_FUNCTION_STRUCT; + +/// +/// Socket Structure +/// +/// +typedef struct _MEM_SOCKET_STRUCT { + OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels training data + + OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels timing data +} MEM_SOCKET_STRUCT; + +/// +/// Contains all data relevant to Memory Initialization. +/// +typedef struct _MEM_DATA_STRUCT { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + + IN MEM_PARAMETER_STRUCT *ParameterListPtr; ///< List of input Parameters + + OUT MEM_FUNCTION_STRUCT FunctionList; ///< List of function Pointers + + IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info + + IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling + + + OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED]; ///< Socket list for memory code. + ///< SocketList is a shortcut for IBVs to retrieve training + ///< and timing data for each channel indexed by socket/channel, + ///< eliminating their need to parse die/dct/channel etc. + ///< It contains pointers to the populated data structures for + ///< each channel and skips the channel structures that are + ///< unpopulated. In the case of channels sharing the same DCT, + ///< the pTimings pointers will point to the same DCT Timing data. + + OUT DIE_STRUCT *DiesPerSystem; ///< Pointed to an array of DIE_STRUCTs + OUT UINT8 DieCount; ///< Number of MCTs in the system. + + IN SPD_DEF_STRUCT *SpdDataStructure; ///< Pointer to SPD Data structure + + IN OUT struct _PLATFORM_CONFIGURATION *PlatFormConfig; ///< Platform profile/build option config structure + + IN OUT BOOLEAN IsFlowControlSupported; ///< Indicates if flow control is supported + + OUT UINT32 TscRate; ///< The rate at which the TSC increments in megahertz. + IN BOOLEAN PhyReceiverLowPower; ///< Force PHY receiver in low power. + ///< TRUE = PHY receiver low power + ///< FALSE = PHY receiver high power +} MEM_DATA_STRUCT; + +/// +/// Uma Structure +/// +/// +typedef struct _UMA_INFO { + OUT UINT64 UmaBase; ///< UmaBase[63:0] = Addr[63:0] + OUT UINT32 UmaSize; ///< UmaSize[31:0] = Addr[31:0] + OUT UINT32 UmaAttributes; ///< Indicate the attribute of Uma + OUT UINT8 UmaMode; ///< Indicate the mode of Uma + OUT UINT16 MemClock; ///< Indicate memory running speed in MHz + OUT UINT8 MemType; ///< Indicate the DRAM technology type that is being used + OUT UINT8 Reserved[2]; ///< Reserved for future usage +} UMA_INFO; + + +/// Bitfield for ID +typedef struct { + OUT UINT16 SocketId:8; ///< Socket ID + OUT UINT16 ModuleId:8; ///< Module ID +} ID_FIELD; +/// +/// Union for ID of socket and module that will be passed out in call out +/// +typedef union { + OUT ID_FIELD IdField; ///< Bitfield for ID + OUT UINT16 IdInformation; ///< ID information for call out +} ID_INFO; + +// AGESA MEMORY ERRORS + +// AGESA_SUCCESS memory events +#define MEM_EVENT_CAPSULE_IN_EFFECT 0x04013600ul ///< Capsule is in effect +#define MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT 0x04023600ul ///< Context restore is in effect + +// AGESA_ALERT Memory Errors +#define MEM_ALERT_USER_TMG_MODE_OVERRULED 0x04010000ul ///< TIMING_MODE_SPECIFIC is requested but + ///< cannot be applied to current configurations. +#define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100ul ///< DIMM organization miss-match +#define MEM_ALERT_BK_INT_DIS 0x04010200ul ///< Bank interleaving disable for internal issue + +// AGESA_ERROR Memory Errors +#define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300ul ///< No DQS Position window for RD DQS +#define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300ul ///< Small DQS Position window for RD DQS +#define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300ul ///< No DQS Position window for WR DQS +#define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300ul ///< Small DQS Position window for WR DQS +#define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500ul ///< DIMM sparing has not been enabled for an internal issues +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300ul ///< Receive Enable value is too large +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300ul ///< There is no DQS receiver enable window +#define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600ul ///< Time out when polling DramEnabled bit +#define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700ul ///< Time out when polling DctAccessDone bit +#define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800ul ///< Time out when polling SendCtrlWord bit +#define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900ul ///< Time out when polling PrefDramTrainMode bit +#define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00ul ///< Time out when polling EnterSelfRef bit +#define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00ul ///< Time out when polling FreqChgInProg bit +#define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00ul ///< Time out when polling ExitSelfRef bit +#define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00ul ///< Time out when polling SendMrsCmd bit +#define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00ul ///< Time out when polling SendZQCmd bit +#define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00ul ///< Time out when polling DctExtraAccessDone bit +#define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00ul ///< Time out when polling MemClrBusy bit +#define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00ul ///< Time out when polling MemCleared bit +#define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000ul ///< Time out when polling FlushWr bit +#define MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT 0x04012600ul ///< Time out when polling CurNBPstate bit +#define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300ul ///< Fail to find pass during Max Rd Latency training +#define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300ul ///< Fail to launch training code on an AP +#define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300ul ///< Fail to finish parallel training +#define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100ul ///< No address mapping found for a dimm +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT 0x040A0300ul ///< There is no DQS receiver enable window and the value is equal to the largest value +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300ul ///< Receive Enable value is too large and is 1 less than limit +#define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR 0x04011200ul ///< SPD Checksum error for NV_SPDCHK_RESTRT +#define MEM_ERROR_NO_CHIPSELECT 0x04011300ul ///< No chipselects found +#define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500ul ///< Unbuffered dimm is not supported at 333MHz +#define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300ul ///< Returned PRE value during write levelizzation was out of range +#define MEM_ERROR_NO_2D_RDDQS_WINDOW 0x040D0300ul ///< No 2D RdDqs Window +#define MEM_ERROR_NO_2D_RDDQS_HEIGHT 0x040E0300ul ///< No 2D RdDqs Height +#define MEM_ERROR_2D_DQS_ERROR 0x040F0300ul ///< 2d RdDqs Error +#define MEM_ERROR_INVALID_2D_RDDQS_VALUE 0x04022400ul ///< 2d RdDqs invalid value found +#define MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR 0x04023400ul ///< 2d RdDqs Vef Margin error found +#define MEM_ERROR_LR_IBT_NOT_FOUND 0x04013500ul ///< No LR dimm IBT value is found +#define MEM_ERROR_MR0_NOT_FOUND 0x04023500ul ///< No MR0 value is found +#define MEM_ERROR_ODT_PATTERN_NOT_FOUND 0x04033500ul ///< No odt pattern value is found +#define MEM_ERROR_RC2_IBT_NOT_FOUND 0x04043500ul ///< No RC2 IBT value is found +#define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND 0x04053500ul ///< No RC10 op speed is found +#define MEM_ERROR_RTT_NOT_FOUND 0x04063500ul ///< No RTT value is found +#define MEM_ERROR_P2D_NOT_FOUND 0x04073500ul ///< No 2D training config value is found +#define MEM_ERROR_SAO_NOT_FOUND 0x04083500ul ///< No slow access mode, Address timing and Output driver compensation value is found +#define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND 0x04093500ul ///< No CLK disable map is found +#define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND 0x040A3500ul ///< No CKE tristate map is found +#define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND 0x040B3500ul ///< No ODT tristate map is found +#define MEM_ERROR_CS_TRI_MAP_NOT_FOUND 0x040C3500ul ///< No CS tristate map is found +#define MEM_ERROR_TRAINING_SEED_NOT_FOUND 0x040D3500ul ///< No training seed is found +#define MEM_ERROR_NO_2D_WRDAT_WINDOW 0x040D0400ul ///< No 2D WrDat Window +#define MEM_ERROR_NO_2D_WRDAT_HEIGHT 0x040E0400ul ///< No 2D WrDat Height +#define MEM_ERROR_2D_WRDAT_ERROR 0x040F0400ul ///< 2d WrDat Error +#define MEM_ERROR_INVALID_2D_WRDAT_VALUE 0x04100400ul ///< 2d WrDat invalid value found +#define MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR 0x04110400ul ///< 2d WrDat Vef Margin error found +#define MEM_ERROR_PMU_TRAINING 0x04120400ul ///< Fail PMU training. + +// AGESA_WARNING Memory Errors +#define MEM_WARNING_UNSUPPORTED_QRDIMM 0x04011600ul ///< QR DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_UDIMM 0x04021600ul ///< U DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_SODIMM 0x04031600ul ///< SO-DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_X4DIMM 0x04041600ul ///< x4 DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_RDIMM 0x04051600ul ///< R DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_LRDIMM 0x04061600ul ///< LR DIMMs detected but not supported +#define MEM_WARNING_EMP_NOT_SUPPORTED 0x04011700ul ///< Processor is not capable for EMP +#define MEM_WARNING_EMP_CONFLICT 0x04021700ul ///< EMP cannot be enabled if channel interleaving, +#define MEM_WARNING_EMP_NOT_ENABLED 0x04031700ul ///< Memory size is not power of two. +#define MEM_WARNING_ECC_DIS 0x04041700ul ///< ECC has been disabled as a result of an internal issue +#define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800ul ///< Performance has been enabled, but battery life is preferred. + ///< bank interleaving, or bank swizzle is enabled. +#define MEM_WARNING_NO_SPDTRC_FOUND 0x04011900ul ///< No Trc timing value found in SPD of a dimm. +#define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000ul ///< Node Interleaveing Requested, but could not be enabled +#define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100ul ///< Channel Interleaveing Requested, but could not be enabled +#define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200ul ///< Bank Interleaveing Requested, but could not be enabled +#define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300ul ///< Voltage 1.35 determined, but could not be supported +#define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO 0x04012400ul ///< DDR3 voltage initial value is not 0 +#define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO 0x04012500ul ///< Cannot find a commonly supported VDDIO +#define MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED 0x04012900ul ///< AMP support detected but not enabled +#define MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED 0x04022900ul ///< AMP selected but not enabled + +// AGESA_FATAL Memory Errors +#define MEM_ERROR_MINIMUM_MODE 0x04011A00ul ///< Running in minimum mode +#define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00ul ///< DIMM modules are miss-matched +#define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00ul ///< No DIMMs have been found +#define MEM_ERROR_MISMATCH_DIMM_CLOCKS 0x04011D00ul ///< DIMM clocks miss-matched +#define MEM_ERROR_NO_CYC_TIME 0x04011E00ul ///< No cycle time found +#define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS 0x04011F00ul ///< Heap allocation error with dynamic storing of trained timings +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs 0x04021F00ul ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT +#define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV 0x04031F00ul ///< Heap allocation error with REMOTE_TRAINING_ENV +#define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD 0x04041F00ul ///< Heap allocation error for SPD data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA 0x04051F00ul ///< Heap allocation error for RECEIVED_DATA during parallel training +#define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS 0x04061F00ul ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER" +#define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA 0x04071F00ul ///< Heap allocation error for Training Data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK 0x04081F00ul ///< Heap allocation error for DIMM Identify "MEM_NB_BLOCK +#define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM 0x04022300ul ///< No Constructor for DIMM Identify +#define MEM_ERROR_VDDIO_UNSUPPORTED 0x04022500ul ///< VDDIO of the dimms on the board is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_2D 0x040B1F00ul ///< Heap allocation error for 2D training data +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_2D 0x040C1F00ul ///< Heap de-allocation error for 2D training data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE 0x040F1F00ul ///< Heap allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE 0x040E1F00ul ///< Heap de-allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_ALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04101F00ul ///< Heap allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04111F00ul ///< Heap de-allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_LOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04121F00ul ///< Heap location error for PMU SRAM Message Block Storage + +// AGESA_CRITICAL Memory Errors +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 0x04091F00ul ///< Heap allocation error for DMI table for DDR3 +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 0x040A1F00ul ///< Heap allocation error for DMI table for DDR2 +#define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG 0x04011400ul ///< Dimm population is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY 0x040D1F00ul ///< Heap allocation error for CRAT memory affinity info + + + +/*---------------------------------------------------------------------------- + * + * END OF MEMORY-SPECIFIC DATA STRUCTURES + * + *---------------------------------------------------------------------------- + */ + + + + +/*---------------------------------------------------------------------------- + * + * CPU RELATED DEFINITIONS + * + *---------------------------------------------------------------------------- + */ + +// CPU Event definitions. + +// Defines used to filter CPU events based on functional blocks +#define CPU_EVENT_PM_EVENT_MASK 0xFF00FF00ul +#define CPU_EVENT_PM_EVENT_CLASS 0x08000400ul + +//================================================================ +// CPU General events +// Heap allocation (AppFunction = 01h) +#define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT 0x08000100ul +#define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED 0x08010100ul +#define CPU_ERROR_HEAP_IS_FULL 0x08020100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED 0x08030100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT 0x08040100ul +// BrandId (AppFunction = 02h) +#define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE 0x08000200ul +// Micro code patch (AppFunction = 03h) +#define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED 0x08000300ul +// Power management (AppFunction = 04h) +#define CPU_EVENT_PM_PSTATE_OVERCURRENT 0x08000400ul +#define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT 0x08010400ul +#define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE 0x08020400ul +#define CPU_ERROR_PM_NB_PSTATE_MISMATCH 0x08030400ul +#define CPU_ERROR_PM_ALL_PSTATE_OVER_FREQUENCY_LIMIT 0x08040400ul +#define CPU_EVENT_PM_PSTATE_FREQUENCY_LIMIT 0x08050400ul +// Other CPU events (AppFunction = 05h) +#define CPU_EVENT_BIST_ERROR 0x08000500ul +#define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY 0x08010500ul +#define CPU_EVENT_STACK_REENTRY 0x08020500ul +#define CPU_EVENT_CORE_NOT_IDENTIFIED 0x08030500ul + +//================================================================= +// CPU Feature events +// Execution cache (AppFunction = 21h) +// AGESA_CACHE_SIZE_REDUCED 2101 +// AGESA_CACHE_REGIONS_ACROSS_1MB 2102 +// AGESA_CACHE_REGIONS_ACROSS_4GB 2103 +// AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 +// AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 +// AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 +// AGESA_DEALLOCATE_CACHE_REGIONS 2107 +#define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR 0x08002100ul +// Core Leveling (AppFunction = 22h) +#define CPU_WARNING_ADJUSTED_LEVELING_MODE 0x08002200ul +// SCS initialization (AppFunction = 24h) +// AGESA_SCS_HEAP_ENTRY_MISSING 2401 +// AGESA_SCS_BUFFER_EMPTY 2402 +// AGESA_SCS_WEIGHTS_MISMATCH 2403 +#define CPU_EVENT_SCS_INITIALIZATION_ERROR 0x08002400ul + +// CPU Build Configuration structures and definitions + +/// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS +typedef struct { + IN UINT32 MsrAddr; ///< Fixed-Sized MTRR address + IN UINT64 MsrData; ///< MTRR Settings +} AP_MTRR_SETTINGS; + +#define AMD_AP_MTRR_FIX64k_00000 0x00000250ul +#define AMD_AP_MTRR_FIX16k_80000 0x00000258ul +#define AMD_AP_MTRR_FIX16k_A0000 0x00000259ul +#define AMD_AP_MTRR_FIX4k_C0000 0x00000268ul +#define AMD_AP_MTRR_FIX4k_C8000 0x00000269ul +#define AMD_AP_MTRR_FIX4k_D0000 0x0000026Aul +#define AMD_AP_MTRR_FIX4k_D8000 0x0000026Bul +#define AMD_AP_MTRR_FIX4k_E0000 0x0000026Cul +#define AMD_AP_MTRR_FIX4k_E8000 0x0000026Dul +#define AMD_AP_MTRR_FIX4k_F0000 0x0000026Eul +#define AMD_AP_MTRR_FIX4k_F8000 0x0000026Ful +#define CPU_LIST_TERMINAL 0xFFFFFFFFul + +/// Data structure for the Mapping Item between Unified ID for IDS Setup Option +/// and the option value. +/// +typedef struct { + IN UINT16 IdsNvId; ///< Unified ID for IDS Setup Option. + OUT UINT16 IdsNvValue; ///< The value of IDS Setup Option. +} IDS_NV_ITEM; + +/// Data Structure for IDS CallOut Function +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN IDS_NV_ITEM *IdsNvPtr; ///< Memory Pointer of IDS NV Table + IN OUT UINTN Reserved; ///< reserved +} IDS_CALLOUT_STRUCT; + +/************************************************************************ + * + * AGESA interface Call-Out function parameter structures + * + ***********************************************************************/ + +/// Parameters structure for interface call-out AgesaAllocateBuffer +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT UINT32 BufferLength; ///< Size of buffer to allocate + IN UINT32 BufferHandle; ///< Identifier or name for the buffer + OUT VOID *BufferPointer; ///< location of the created buffer +} AGESA_BUFFER_PARAMS; + +/// Parameters structure for interface call-out AgesaHeapRebase +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINTN HeapAddress; ///< The address which heap content will be temporarily stored in +} AGESA_REBASE_PARAMS; + +/// Parameters structure for interface call-out AgesaRunCodeOnAp +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT32 FunctionNumber; ///< Index of the procedure to execute + IN VOID *RelatedDataBlock; ///< Location of data structure the procedure will use + IN UINT32 RelatedBlockLength; ///< Size of the related data block +} AP_EXE_PARAMS; + +/// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 SocketId; ///< Address of SPD - socket ID + IN UINT8 MemChannelId; ///< Address of SPD - memory channel ID + IN UINT8 DimmId; ///< Address of SPD - DIMM ID + IN OUT UINT8 *Buffer; ///< Location where to place the SPD content + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference +} AGESA_READ_SPD_PARAMS; + +/// VoltageType values +typedef enum { + VTYPE_CPU_VREF, ///< Cpu side Vref + VTYPE_DIMM_VREF, ///< Dimm Side Vref + VTYPE_VDDIO ///< Vddio +} VTYPE; + +/// Parameters structure for the interface call-out AgesaExternalVoltageAdjust +typedef struct _VOLTAGE_ADJUST { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference + IN VTYPE VoltageType; ///< Which Voltage Type to adjust + IN INT8 AdjustValue; ///< Positive/Negative Adjust Value +} VOLTAGE_ADJUST; + +/// Buffer Handles +typedef enum { + AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000, ///< Assign 0x000D000 buffer handle to DMI function + AMD_PSTATE_DATA_BUFFER_HANDLE, ///< Assign 0x000D001 buffer handle to Pstate data + AMD_PSTATE_ACPI_BUFFER_HANDLE, ///< Assign 0x000D002 buffer handle to Pstate table + AMD_BRAND_ID_BUFFER_HANDLE, ///< Assign 0x000D003 buffer handle to Brand ID + AMD_ACPI_SLIT_BUFFER_HANDLE, ///< Assign 0x000D004 buffer handle to SLIT function + AMD_SRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D005 buffer handle to SRAT function + AMD_WHEA_BUFFER_HANDLE, ///< Assign 0x000D006 buffer handle to WHEA function + AMD_S3_INFO_BUFFER_HANDLE, ///< Assign 0x000D007 buffer handle to S3 function + AMD_S3_NB_INFO_BUFFER_HANDLE, ///< Assign 0x000D008 buffer handle to S3 NB device info + AMD_ACPI_ALIB_BUFFER_HANDLE, ///< Assign 0x000D009 buffer handle to ALIB SSDT table + AMD_ACPI_IVRS_BUFFER_HANDLE, ///< Assign 0x000D00A buffer handle to IOMMU IVRS table + AMD_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D00B buffer handle to CRAT function + AMD_ACPI_CDIT_BUFFER_HANDLE ///< Assign 0x000D00C buffer handle to CDIT function +} AMD_BUFFER_HANDLE; + + +/************************************************************************ + * + * AGESA interface Call-Out function prototypes + * + ***********************************************************************/ + +VOID +AgesaDoReset ( + IN UINTN ResetType, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AgesaAllocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *AllocParams + ); + +AGESA_STATUS +AgesaDeallocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *DeallocParams + ); + +AGESA_STATUS +AgesaLocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *LocateParams + ); + +AGESA_STATUS +AgesaHeapRebase ( + IN UINTN FcnData, + IN OUT AGESA_REBASE_PARAMS *RebaseParams + ); + +AGESA_STATUS +AgesaReadSpd ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaReadSpdRecovery ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaHookBeforeDramInitRecovery ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaRunFcnOnAp ( + IN UINTN ApicIdOfCore, + IN AP_EXE_PARAMS *LaunchApParams + ); + +AGESA_STATUS +AgesaHookBeforeDramInit ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeDQSTraining ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeExitSelfRefresh ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaPcieSlotResetControl ( + IN UINTN FcnData, + IN PCIe_SLOT_RESET_INFO *ResetInfo + ); + +AGESA_STATUS +AgesaGetVbiosImage ( + IN UINTN FcnData, + IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo + ); + +AGESA_STATUS +AgesaFchOemCallout ( + IN VOID *FchData + ); + +AGESA_STATUS +AgesaExternal2dTrainVrefChange ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaGetIdsData ( + IN UINTN Data, + IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData + ); + +AGESA_STATUS +AgesaExternalVoltageAdjust ( + IN UINTN SocketIdModuleId, + IN OUT VOLTAGE_ADJUST *AdjustValue + ); + +AGESA_STATUS +AgesaGnbOemCallout ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINTN FcnData, + IN OUT VOID *GnbCalloutData + ); + +/************************************************************************ + * + * AGESA interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Platform Configuration: The parameters in boot branch function + **********************************************************************/ + +/// The possible platform control flow settings. +typedef enum { + Nfcm, ///< Normal Flow Control Mode. + UmaDr, ///< UMA using Display Refresh flow control. + UmaIfcm, ///< UMA using Isochronous Flow Control. + Ifcm, ///< Isochronous Flow Control Mode (other than for UMA). + Iommu, ///< An IOMMU is in use in the system. + MaxControlFlow ///< Not a control flow mode, use for limit checking. +} PLATFORM_CONTROL_FLOW; + +/// The possible hardware prefetch mode settings. +typedef enum { + HARDWARE_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. + DISABLE_L1_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above. + DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER + DISABLE_L2_STRIDE_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above + DISABLE_HARDWARE_PREFETCH, ///< Disable hardware prefetching. + MAX_HARDWARE_PREFETCH_MODE ///< Not a hardware prefetch mode, use for limit checking. +} HARDWARE_PREFETCH_MODE; + +/// The possible software prefetch mode settings. +typedef enum { + SOFTWARE_PREFETCHES_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_SOFTWARE_PREFETCHES, ///< Disable software prefetches (convert software prefetch instructions to NOP). + MAX_SOFTWARE_PREFETCH_MODE ///< Not a software prefetch mode, use for limit checking. +} SOFTWARE_PREFETCH_MODE; + +/// Advanced performance tunings, prefetchers. +/// These settings provide for performance tuning to optimize for specific workloads. +typedef struct { + IN HARDWARE_PREFETCH_MODE HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting. + IN SOFTWARE_PREFETCH_MODE SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions. + IN DRAM_PREFETCH_MODE DramPrefetchMode; ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. +} ADVANCED_PERFORMANCE_PROFILE; + +/// The possible platform power policy settings. +typedef enum { + Performance, ///< Optimize for performance. + BatteryLife, ///< Optimize for battery life. + Auto, ///< Auto + MaxPowerPolicy ///< Not a power policy mode, use for limit checking. +} PLATFORM_POWER_POLICY; + +/// Platform performance settings for optimized settings. +/// Several configuration settings for the processor depend upon other parts and +/// general designer choices for the system. The determination of these data points +/// is not standard for all platforms, so the host environment needs to provide these +/// to specify how the system is to be configured. +typedef struct { + IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; ///< The platform's control flow mode for optimum platform performance. + ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE} + IN BOOLEAN Use32ByteRefresh; ///< Display Refresh traffic generates 32 byte requests. + ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH} + IN BOOLEAN UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority. + ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY} + IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile; ///< The advanced platform performance settings. + IN PLATFORM_POWER_POLICY PlatformPowerPolicy; ///< The platform's desired power policy + ///< @BldCfgItem{BLDCFG_PLATFORM_POWER_POLICY_MODE} + IN BOOLEAN NbPstatesSupported; ///< The Nb-Pstates is supported or not + ///< @BldCfgItem{BLDCFG_NB_PSTATES_SUPPORTED} +} PERFORMANCE_PROFILE; + +/// Platform settings that describe the voltage regulator modules of the system. +/// Many power management settings are dependent upon the characteristics of the +/// on-board voltage regulator module (VRM). The host environment needs to provide +/// these to specify how the system is to be configured. +typedef struct { + IN UINT32 CurrentLimit; ///< Vrm Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT} + IN UINT32 LowPowerThreshold; ///< Vrm Low Power Threshold. + ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD} + ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD} + IN UINT32 SlewRate; ///< Vrm Slew Rate. + ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE} + ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE} + IN BOOLEAN HiSpeedEnable; ///< Select high speed VRM. + ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE} + ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE} + IN UINT32 MaximumCurrentLimit; ///< Vrm Maximum Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT} + IN UINT32 SviOcpLevel; ///< SVI OCP Level. + ///< @BldCfgItem{BLDCFG_VRM_SVI_OCP_LEVEL} + ///< @BldCfgItem{BLDCFG_VRM_NB_SVI_OCP_LEVEL} +} PLATFORM_VRM_CONFIGURATION; + +/// The VRM types to characterize. +typedef enum { + CoreVrm, ///< VDD plane. + NbVrm, ///< VDDNB plane. + MaxVrmType ///< Not a valid VRM type, use for limit checking. +} PLATFORM_VRM_TYPE; + + +/// FCH Platform Configuration Policy +typedef struct { + IN UINT16 CfgSmbus0BaseAddress; ///< SMBUS0 Controller Base Address + IN UINT16 CfgSmbus1BaseAddress; ///< SMBUS1 Controller Base Address + IN UINT16 CfgSioPmeBaseAddress; ///< I/O base address for LPC I/O target range + IN UINT16 CfgAcpiPm1EvtBlkAddr; ///< I/O base address of ACPI power management Event Block + IN UINT16 CfgAcpiPm1CntBlkAddr; ///< I/O base address of ACPI power management Control Block + IN UINT16 CfgAcpiPmTmrBlkAddr; ///< I/O base address of ACPI power management Timer Block + IN UINT16 CfgCpuControlBlkAddr; ///< I/O base address of ACPI power management CPU Control Block + IN UINT16 CfgAcpiGpe0BlkAddr; ///< I/O base address of ACPI power management General Purpose Event Block + IN UINT16 CfgSmiCmdPortAddr; ///< I/O base address of ACPI SMI Command Block + IN UINT16 CfgAcpiPmaCntBlkAddr; ///< I/O base address of ACPI power management additional control block + IN UINT32 CfgGecShadowRomBase; ///< 32-bit base address to the GEC shadow ROM + IN UINT32 CfgWatchDogTimerBase; ///< Watchdog Timer base address + IN UINT32 CfgSpiRomBaseAddress; ///< Base address for the SPI ROM controller + IN UINT32 CfgHpetBaseAddress; ///< HPET MMIO base address + IN UINT32 CfgAzaliaSsid; ///< Subsystem ID of HD Audio controller + IN UINT32 CfgSmbusSsid; ///< Subsystem ID of SMBUS controller + IN UINT32 CfgIdeSsid; ///< Subsystem ID of IDE controller + IN UINT32 CfgSataAhciSsid; ///< Subsystem ID of SATA controller in AHCI mode + IN UINT32 CfgSataIdeSsid; ///< Subsystem ID of SATA controller in IDE mode + IN UINT32 CfgSataRaid5Ssid; ///< Subsystem ID of SATA controller in RAID5 mode + IN UINT32 CfgSataRaidSsid; ///< Subsystem ID of SATA controller in RAID mode + IN UINT32 CfgEhciSsid; ///< Subsystem ID of EHCI + IN UINT32 CfgOhciSsid; ///< Subsystem ID of OHCI + IN UINT32 CfgLpcSsid; ///< Subsystem ID of LPC ISA Bridge + IN UINT32 CfgSdSsid; ///< Subsystem ID of SecureDigital controller + IN UINT32 CfgXhciSsid; ///< Subsystem ID of XHCI + IN BOOLEAN CfgFchPort80BehindPcib; ///< Is port80 cycle going to the PCI bridge + IN BOOLEAN CfgFchEnableAcpiSleepTrap; ///< ACPI sleep SMI enable/disable + IN GPP_LINKMODE CfgFchGppLinkConfig; ///< GPP link configuration + IN BOOLEAN CfgFchGppPort0Present; ///< Is FCH GPP port 0 present + IN BOOLEAN CfgFchGppPort1Present; ///< Is FCH GPP port 1 present + IN BOOLEAN CfgFchGppPort2Present; ///< Is FCH GPP port 2 present + IN BOOLEAN CfgFchGppPort3Present; ///< Is FCH GPP port 3 present + IN BOOLEAN CfgFchGppPort0HotPlug; ///< Is FCH GPP port 0 hotplug capable + IN BOOLEAN CfgFchGppPort1HotPlug; ///< Is FCH GPP port 1 hotplug capable + IN BOOLEAN CfgFchGppPort2HotPlug; ///< Is FCH GPP port 2 hotplug capable + IN BOOLEAN CfgFchGppPort3HotPlug; ///< Is FCH GPP port 3 hotplug capable + + IN UINT8 CfgFchEsataPortBitMap; ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable + IN UINT8 CfgFchIrPinControl; ///< Register bitfield describing Infrared Pin Control: + ///< [0] - IR Enable 0 + ///< [1] - IR Enable 1 + ///< [2] - IR Tx0 + ///< [3] - IR Tx1 + ///< [4] - IR Open Drain + ///< [5] - IR Enable LED + IN SD_CLOCK_CONTROL CfgFchSdClockControl; ///< FCH SD Clock Control + IN SCI_MAP_CONTROL *CfgFchSciMapControl; ///< FCH SCI Mapping Control + IN SATA_PHY_CONTROL *CfgFchSataPhyControl; ///< FCH SATA PHY Control + IN GPIO_CONTROL *CfgFchGpioControl; ///< FCH GPIO Control + IN BOOLEAN CfgFchRtcWorkAround; ///< FCH RTC Workaround + IN BOOLEAN CfgFchUsbPortDisWorkAround; ///< FCH USB Workaround +} FCH_PLATFORM_POLICY; + + +/// Build Option/Configuration Boolean Structure. +typedef struct { + IN AMD_CODE_HEADER VersionString; ///< AMD embedded code version string + + //Build Option Area + IN BOOLEAN OptionUDimms; ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT" + IN BOOLEAN OptionRDimms; ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT" + IN BOOLEAN OptionLrDimms; ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT" + IN BOOLEAN OptionEcc; ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT" + IN BOOLEAN OptionBankInterleave; ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE" + IN BOOLEAN OptionDctInterleave; ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE" + IN BOOLEAN OptionNodeInterleave; ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE" + IN BOOLEAN OptionParallelTraining; ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING" + IN BOOLEAN OptionOnlineSpare; ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT" + IN BOOLEAN OptionMemRestore; ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT" + IN BOOLEAN OptionMultisocket; ///< @ref BLDOPT_REMOVE_MULTISOCKET_SUPPORT "BLDOPT_REMOVE_MULTISOCKET_SUPPORT" + IN BOOLEAN OptionAcpiPstates; ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES" + IN BOOLEAN OptionCrat; ///< @ref BLDOPT_REMOVE_CRAT "BLDOPT_REMOVE_CRAT" + IN BOOLEAN OptionCdit; ///< @ref BLDOPT_REMOVE_CDIT "BLDOPT_REMOVE_CDIT" + IN BOOLEAN OptionSrat; ///< @ref BLDOPT_REMOVE_SRAT "BLDOPT_REMOVE_SRAT" + IN BOOLEAN OptionSlit; ///< @ref BLDOPT_REMOVE_SLIT "BLDOPT_REMOVE_SLIT" + IN BOOLEAN OptionWhea; ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA" + IN BOOLEAN OptionDmi; ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI" + IN BOOLEAN OptionEarlySamples; ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES" + IN BOOLEAN OptionAddrToCsTranslator; ///< ADDR_TO_CS_TRANSLATOR + + //Build Configuration Area + IN UINT64 CfgPciMmioAddress; ///< Pci Mmio Base Address to use for PCI Config accesses. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE} + IN UINT32 CfgPciMmioSize; ///< Pci Mmio region Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE} + IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN UINT32 CfgCpuFrequencyLimit; ///< CPU frequency limit + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< Enable or disable connected standby + IN UINT32 CfgPlatNumIoApics; ///< The number of IO APICS for the platform. + IN UINT32 CfgMemInitPstate; ///< Memory Init Pstate. + IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used. + IN UINT32 CfgPlatformCStateOpData; ///< An IO port or additional C-State setup data, depends on C-State mode. + IN UINT16 CfgPlatformCStateIoBaseAddress; ///< Specifies I/O ports that can be used to allow CPU to enter CStates + IN PLATFORM_CPB_MODES CfgPlatformCpbMode; ///< Enable or disable core performance boost + IN PLATFORM_LOW_POWER_PSTATE_MODES CfgLowPowerPstateForProcHot; ///< Low power Pstate for PROCHOT mode + IN UINT32 CfgCoreLevelingMode; ///< Apply any downcoring or core count leveling as specified. + IN PERFORMANCE_PROFILE CfgPerformanceProfile; ///< The platform's control flow mode and platform performance settings. + + IN UINT32 CfgAmdPlatformType; ///< Designate the platform as a Server, Desktop, or Mobile. + IN UINT32 CfgAmdPowerCeiling; ///< PowerCeiling, specifies a maximum power usage limit for the platform + IN UINT16 CfgHtcTemperatureLimit; ///< Hardware Thermal Control temperature limit in tenths of degrees Celsius. + IN UINT16 CfgLhtcTemperatureLimit; ///< Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + + IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT} + IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED} + IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE} + IN UINT32 CfgMemoryQuadrankType; ///< Memory Quadrank Type. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE} + IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable. + IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable. + IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable. + IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE} + IN BOOLEAN CfgLimitMemoryToBelow1Tb; ///< Limit memory address space to below 1TB + IN BOOLEAN CfgMemoryEnableBankInterleaving; ///< Memory Enable Bank Interleaving. + IN BOOLEAN CfgMemoryEnableNodeInterleaving; ///< Memory Enable Node Interleaving. + IN BOOLEAN CfgMemoryChannelInterleaving; ///< Memory Channel Interleaving. + IN BOOLEAN CfgMemoryPowerDown; ///< Memory Power Down. + IN UINT32 CfgPowerDownMode; ///< Power Down Mode. + IN BOOLEAN CfgOnlineSpare; ///< Online Spare. + IN BOOLEAN CfgMemoryParityEnable; ///< Memory Parity Enable. + IN BOOLEAN CfgBankSwizzle; ///< Bank Swizzle. + IN UINT32 CfgTimingModeSelect; ///< Timing Mode Select. + IN UINT32 CfgMemoryClockSelect; ///< Memory Clock Select. + IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL} + IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM} + IN BOOLEAN CfgUseBurstMode; ///< Use Burst Mode. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE} + IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON} + IN BOOLEAN CfgDdrPhyDllBypassMode; ///< Enable DllPDBypassMode + IN BOOLEAN CfgEnableEccFeature; ///< Enable ECC Feature. + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION} + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE} + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE} + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE} + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE} + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE} + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD} + IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE} + IN UINT64 CfgHeapDramAddress; ///< Heap contents will be temporarily stored in this address during the transition. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS} + IN BOOLEAN CfgNodeMem1GBAlign; ///< Node Mem 1GB boundary Alignment + IN BOOLEAN CfgS3LateRestore; ///< S3 Late Restore + IN BOOLEAN CfgAcpiPstateIndependent; ///< PSD method dependent/Independent + IN UINT32 CfgAcpiPstatesPsdPolicy; ///< PSD policy + IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList; ///< The AP's MTRR settings before final halt + ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST} + IN UMA_MODE CfgUmaMode; ///< Uma Mode + IN UINT32 CfgUmaSize; ///< Uma Size [31:0]=Addr[47:16] + IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support + IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment + IN BOOLEAN CfgProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + IN CHAR8 CfgProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + IN CHAR8 CfgProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + IN UINT8 CfgGnbHdAudio; ///< GNB HD Audio + IN UINT8 CfgAbmSupport; ///< Abm Support + IN UINT8 CfgDynamicRefreshRate; ///< DRR Dynamic Refresh Rate + IN UINT16 CfgLcdBackLightControl; ///< LCD Backlight Control + IN UINT8 CfgGnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + IN UINT32 CfgTempPcieMmioBaseAddress; ///< Temp pcie MMIO base Address + ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS} + IN UINT32 CfgGnbIGPUSSID; ///< Gnb internal GPU SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID} + IN UINT32 CfgGnbHDAudioSSID; ///< Gnb HD Audio SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID} + IN UINT32 CfgGnbPcieSSID; ///< Gnb PCIe SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID} + IN UINT16 CfgLvdsSpreadSpectrum; ///< Lvds Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 CfgLvdsSpreadSpectrumRate; ///< Lvds Spread Spectrum Rate + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN FCH_PLATFORM_POLICY *FchBldCfg; ///< FCH platform build configuration policy + + IN BOOLEAN CfgIommuSupport; ///< IOMMU support + IN UINT8 CfgLvdsPowerOnSeqDigonToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToDigon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing + IN UINT16 CfgLvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported + IN UINT32 CfgLcdBitDepthControlValue; ///< The LCD bit depth control settings + IN UINT8 CfgLvds24bbpPanelMode; ///< The LVDS 24 BBP mode + IN LVDS_MISC_CONTROL CfgLvdsMiscControl; ///< THe LVDS Misc control + IN UINT16 CfgPcieRefClkSpreadSpectrum; ///< PCIe Reference Clock Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN CfgExternalVrefCtlFeature; ///< External Vref control + IN FORCE_TRAIN_MODE CfgForceTrainMode; ///< Force Train Mode + IN BOOLEAN CfgGnbRemoteDisplaySupport; ///< Wireless Display Support + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList; + IN BOOLEAN CfgGnbSyncFloodPinAsNmi; ///< @ref BLDCFG_USE_SYNCFLOOD_AS_NMI "BLDCFG_USE_SYNCFLOOD_AS_NMI" + IN UINT8 CfgIgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use current default + ///< @li 2 = Disable iGPU if ANY PCI or PCIe Graphics card is present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} + IN UINT8 CfgGnbSwTjOffset; ///< Software-writeable TjOffset to account for changes in junction temperature + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GNB_THERMAL_SENSOR_CORRECTION} + IN UINT8 CfgLvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< Build-time customizable only - @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL CfgDisplayMiscControl; ///< The Display Misc control + IN DP_FIXED_VOLT_SWING_TYPE CfgDpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + IN BOOLEAN CfgHybridBoostEnable; ///< HyBrid Boost support + ///< @BldCfgItem{BLDCFG_HYBRID_BOOST_ENABLE} + IN UINT64 CfgGnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} + IN BOOLEAN CfgDataEyeEn; ///< Enable get 2D Data Eye + IN BOOLEAN CfgDockedTdpHeadroom; ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} + IN BOOLEAN CfgBatteryBoostEn; ///< @BldCfgItem{BLDCFG_BATTERY_BOOST_EN} + IN UINT32 CfgTdpAcDocked; ///< @BldCfgItem{BLDCFG_TDP_AC_DOCKED} + IN UINT32 CfgTdpDcDocked; ///< @BldCfgItem{BLDCFG_TDP_DC_DOCKED} + IN UINT32 CfgTdpAcUnDocked; ///< @BldCfgItem{BLDCFG_TDP_AC_UNDOCKED} + IN UINT32 CfgTdpDcUnDocked; ///< @BldCfgItem{BLDCFG_TDP_DC_UNDOCKED} + IN BOOLEAN CfgStapmEnAcDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_AC_DOCKED} + IN BOOLEAN CfgStapmEnDcDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_DC_DOCKED} + IN BOOLEAN CfgStapmEnAcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_AC_UNDOCKED} + IN BOOLEAN CfgStapmEnDcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_DC_UNDOCKED} + IN UINT32 CfgStapmPowerAcDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_AC_DOCKED} + IN UINT32 CfgStapmPowerDcDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_DC_DOCKED} + IN UINT32 CfgStapmPowerAcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_AC_UNDOCKED} + IN UINT32 CfgStapmPowerDcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_DC_UNDOCKED} + IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate + IN ACP_SIZE CfgGnbAcpSize; ///< ACP size [31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} + IN PMU_TRAIN_MODE CfgPmuTrainMode; ///< Force Train Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + IN MEMORY_PHY_VOLTAGE CfgMemoryPhyVoltage; ///< Memory Phy voltage (VDDR) + ///< @BldCfgItem{BLDCFG_MEMORY_PHY_VOLTAGE} + IN UINT32 CfgGpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} + IN BOOLEAN CfgBapmEnable; ///< @BldCfgItem{BLDCFG_BAPM_ENABLE} + IN BOOLEAN Reserved; ///< reserved... +} BUILD_OPT_CFG; + +/// A structure containing platform specific operational characteristics. This +/// structure is initially populated by the initializer with a copy of the same +/// structure that was created at build time using the build configuration controls. +typedef struct _PLATFORM_CONFIGURATION { + IN PERFORMANCE_PROFILE PlatformProfile; ///< Several configuration settings for the processor. + IN UINT8 CoreLevelingMode; ///< Indicates how to balance the number of cores per processor. + ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE} + IN PLATFORM_CSTATE_MODES CStateMode; ///< Specifies the method of C-State enablement - Disabled, or C6. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE} + IN UINT32 CStatePlatformData; ///< This element specifies some pertinent data needed for the operation of the Cstate feature + ///< If CStateMode is CStateModeC6, this item is reserved + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA} + IN UINT16 CStateIoBaseAddress; ///< This item specifies a free block of 8 consecutive bytes of I/O ports that + ///< can be used to allow the CPU to enter Cstates. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS} + IN PLATFORM_CPB_MODES CpbMode; ///< Specifies the method of core performance boost enablement - Disabled, or Auto. + ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE} + IN BOOLEAN UserOptionDmi; ///< When set to TRUE, the DMI data table is generated. + IN BOOLEAN UserOptionPState; ///< When set to TRUE, the PState data tables are generated. + IN BOOLEAN UserOptionCrat; ///< When set to TRUE, the CRAT data table is generated. + IN BOOLEAN UserOptionCdit; ///< When set to TRUE, the CDIT data table is generated. + IN BOOLEAN UserOptionSrat; ///< When set to TRUE, the SRAT data table is generated. + IN BOOLEAN UserOptionSlit; ///< When set to TRUE, the SLIT data table is generated. + IN BOOLEAN UserOptionWhea; ///< When set to TRUE, the WHEA data table is generated. + IN PLATFORM_LOW_POWER_PSTATE_MODES LowPowerPstateForProcHot; ///< Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. + IN UINT32 PowerCeiling; ///< P-State Ceiling Enabling Deck - Max power milli-watts. + IN BOOLEAN ForcePstateIndependent; ///< Deprecated in favor of PstatesPsdPolicy. + ///< P-State _PSD is forced independent. + ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT} + IN UINT32 PstatesPsdPolicy; ///< PSD policy + ///< @BldCfgItem{BLDCFG_ACPI_PSTATES_PSD_POLICY} + IN UINT32 CpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_CPU_FREQUENCY_LIMIT} + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< @BldCfgItem{BLDCFG_CPU_CONNECTED_STANDBY_MODE} + IN UINT32 NumberOfIoApics; ///< Number of I/O APICs in the system + ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS} + IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN BOOLEAN ProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB} + IN CHAR8 ProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0} + IN CHAR8 ProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1} + IN UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output), + ///< essentially it enables function 1 of graphics device. + ///< @li 0 = HD Audio disable + ///< @li 1 = HD Audio enable + ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO} + IN UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is + ///< characteristic specific to display panel which used by platform design. + ///< @li 0 = ABM support disabled + ///< @li 1 = ABM support enabled + ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT} + IN UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP. + ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE} + IN UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control. + ///< If equal to 0 backlight not controlled by iGPU + ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL} + IN UINT16 HtcTemperatureLimit; ///< The Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_HTC_TEMPERATURE_LIMIT} + IN UINT16 LhtcTemperatureLimit; ///< The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_LHTC_TEMPERATURE_LIMIT} + IN ACP_SIZE AcpSize; ///< The size of ACP dram + ///< ACP_Size[31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} +} PLATFORM_CONFIGURATION; + + +/********************************************************************** + * Structures for: AmdInitLate + **********************************************************************/ +#define PROC_VERSION_LENGTH 48 +#define MAX_DIMMS_PER_SOCKET 16 +#define PROC_MANU_LENGTH 29 + +/* Interface Parameter Structures */ +/// DMI Type4 - Processor ID +typedef struct { + OUT UINT32 ProcIdLsd; ///< Lower half of 64b ID + OUT UINT32 ProcIdMsd; ///< Upper half of 64b ID +} TYPE4_PROC_ID; + +/// DMI Type 4 - Processor information +typedef struct { + OUT UINT8 T4ProcType; ///< CPU Type + OUT UINT8 T4ProcFamily; ///< Family 1 + OUT TYPE4_PROC_ID T4ProcId; ///< Id + OUT UINT8 T4Voltage; ///< Voltage + OUT UINT16 T4ExternalClock; ///< External clock + OUT UINT16 T4MaxSpeed; ///< Max speed + OUT UINT16 T4CurrentSpeed; ///< Current speed + OUT UINT8 T4Status; ///< Status + OUT UINT8 T4ProcUpgrade; ///< Up grade + OUT UINT8 T4CoreCount; ///< Core count + OUT UINT8 T4CoreEnabled; ///< Core Enable + OUT UINT8 T4ThreadCount; ///< Thread count + OUT UINT16 T4ProcCharacteristics; ///< Characteristics + OUT UINT16 T4ProcFamily2; ///< Family 2 + OUT CHAR8 T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version + OUT CHAR8 T4ProcManufacturer[PROC_MANU_LENGTH]; ///< Manufacturer +} TYPE4_DMI_INFO; + +/// DMI Type 7 - Cache information +typedef struct _TYPE7_DMI_INFO { + OUT UINT16 T7CacheCfg; ///< Cache cfg + OUT UINT16 T7MaxCacheSize; ///< Max size + OUT UINT16 T7InstallSize; ///< Install size + OUT UINT16 T7SupportedSramType; ///< Supported Sram Type + OUT UINT16 T7CurrentSramType; ///< Current type + OUT UINT8 T7CacheSpeed; ///< Speed + OUT UINT8 T7ErrorCorrectionType; ///< ECC type + OUT UINT8 T7SystemCacheType; ///< Cache type + OUT UINT8 T7Associativity; ///< Associativity +} TYPE7_DMI_INFO; + +/// DMI Type 16 offset 04h - Location +typedef enum { + OtherLocation = 0x01, ///< Assign 01 to Other + UnknownLocation, ///< Assign 02 to Unknown + SystemboardOrMotherboard, ///< Assign 03 to systemboard or motherboard + IsaAddonCard, ///< Assign 04 to ISA add-on card + EisaAddonCard, ///< Assign 05 to EISA add-on card + PciAddonCard, ///< Assign 06 to PCI add-on card + McaAddonCard, ///< Assign 07 to MCA add-on card + PcmciaAddonCard, ///< Assign 08 to PCMCIA add-on card + ProprietaryAddonCard, ///< Assign 09 to proprietary add-on card + NuBus, ///< Assign 0A to NuBus + Pc98C20AddonCard, ///< Assign 0A0 to PC-98/C20 add-on card + Pc98C24AddonCard, ///< Assign 0A1 to PC-98/C24 add-on card + Pc98EAddoncard, ///< Assign 0A2 to PC-98/E add-on card + Pc98LocalBusAddonCard ///< Assign 0A3 to PC-98/Local bus add-on card +} DMI_T16_LOCATION; + +/// DMI Type 16 offset 05h - Memory Error Correction +typedef enum { + OtherUse = 0x01, ///< Assign 01 to Other + UnknownUse, ///< Assign 02 to Unknown + SystemMemory, ///< Assign 03 to system memory + VideoMemory, ///< Assign 04 to video memory + FlashMemory, ///< Assign 05 to flash memory + NonvolatileRam, ///< Assign 06 to non-volatile RAM + CacheMemory ///< Assign 07 to cache memory +} DMI_T16_USE; + +/// DMI Type 16 offset 07h - Maximum Capacity +typedef enum { + Dmi16OtherErrCorrection = 0x01, ///< Assign 01 to Other + Dmi16UnknownErrCorrection, ///< Assign 02 to Unknown + Dmi16NoneErrCorrection, ///< Assign 03 to None + Dmi16Parity, ///< Assign 04 to parity + Dmi16SingleBitEcc, ///< Assign 05 to Single-bit ECC + Dmi16MultiBitEcc, ///< Assign 06 to Multi-bit ECC + Dmi16Crc ///< Assign 07 to CRC +} DMI_T16_ERROR_CORRECTION; + +/// DMI Type 16 - Physical Memory Array +typedef struct { + OUT DMI_T16_LOCATION Location; ///< The physical location of the Memory Array, + ///< whether on the system board or an add-in board. + OUT DMI_T16_USE Use; ///< Identifies the function for which the array + ///< is used. + OUT DMI_T16_ERROR_CORRECTION MemoryErrorCorrection; ///< The primary hardware error correction or + ///< detection method supported by this memory array. + OUT UINT16 NumberOfMemoryDevices; ///< The number of slots or sockets available + ///< for memory devices in this array. +} TYPE16_DMI_INFO; + +/// DMI Type 17 offset 0Eh - Form Factor +typedef enum { + OtherFormFactor = 0x01, ///< Assign 01 to Other + UnknowFormFactor, ///< Assign 02 to Unknown + SimmFormFactor, ///< Assign 03 to SIMM + SipFormFactor, ///< Assign 04 to SIP + ChipFormFactor, ///< Assign 05 to Chip + DipFormFactor, ///< Assign 06 to DIP + ZipFormFactor, ///< Assign 07 to ZIP + ProprietaryCardFormFactor, ///< Assign 08 to Proprietary Card + DimmFormFactorFormFactor, ///< Assign 09 to DIMM + TsopFormFactor, ///< Assign 10 to TSOP + RowOfChipsFormFactor, ///< Assign 11 to Row of chips + RimmFormFactor, ///< Assign 12 to RIMM + SodimmFormFactor, ///< Assign 13 to SODIMM + SrimmFormFactor, ///< Assign 14 to SRIMM + FbDimmFormFactor ///< Assign 15 to FB-DIMM +} DMI_T17_FORM_FACTOR; + +/// DMI Type 17 offset 12h - Memory Type +typedef enum { + OtherMemType = 0x01, ///< Assign 01 to Other + UnknownMemType, ///< Assign 02 to Unknown + DramMemType, ///< Assign 03 to DRAM + EdramMemType, ///< Assign 04 to EDRAM + VramMemType, ///< Assign 05 to VRAM + SramMemType, ///< Assign 06 to SRAM + RamMemType, ///< Assign 07 to RAM + RomMemType, ///< Assign 08 to ROM + FlashMemType, ///< Assign 09 to Flash + EepromMemType, ///< Assign 10 to EEPROM + FepromMemType, ///< Assign 11 to FEPROM + EpromMemType, ///< Assign 12 to EPROM + CdramMemType, ///< Assign 13 to CDRAM + ThreeDramMemType, ///< Assign 14 to 3DRAM + SdramMemType, ///< Assign 15 to SDRAM + SgramMemType, ///< Assign 16 to SGRAM + RdramMemType, ///< Assign 17 to RDRAM + DdrMemType, ///< Assign 18 to DDR + Ddr2MemType, ///< Assign 19 to DDR2 + Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM + Ddr3MemType = 0x18, ///< Assign 24 to DDR3 + Fbd2MemType ///< Assign 25 to FBD2 +} DMI_T17_MEMORY_TYPE; + +/// DMI Type 17 offset 13h - Type Detail +typedef struct { + OUT UINT16 Reserved1:1; ///< Reserved + OUT UINT16 Other:1; ///< Other + OUT UINT16 Unknown:1; ///< Unknown + OUT UINT16 FastPaged:1; ///< Fast-Paged + OUT UINT16 StaticColumn:1; ///< Static column + OUT UINT16 PseudoStatic:1; ///< Pseudo-static + OUT UINT16 Rambus:1; ///< RAMBUS + OUT UINT16 Synchronous:1; ///< Synchronous + OUT UINT16 Cmos:1; ///< CMOS + OUT UINT16 Edo:1; ///< EDO + OUT UINT16 WindowDram:1; ///< Window DRAM + OUT UINT16 CacheDram:1; ///< Cache Dram + OUT UINT16 NonVolatile:1; ///< Non-volatile + OUT UINT16 Registered:1; ///< Registered (Buffered) + OUT UINT16 Unbuffered:1; ///< Unbuffered (Unregistered) + OUT UINT16 Reserved2:1; ///< Reserved +} DMI_T17_TYPE_DETAIL; + +/// DMI Type 17 - Memory Device +typedef struct { + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceSet; ///< Identifies when the Memory Device is one of a set of + ///< Memory Devices that must be populated with all devices of + ///< the same type and size, and the set to which this device belongs. + OUT CHAR8 DeviceLocator[8]; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT CHAR8 BankLocator[10]; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT DMI_T17_MEMORY_TYPE MemoryType; ///< The type of memory used in this device. + OUT DMI_T17_TYPE_DETAIL TypeDetail; ///< Additional detail on the memory device type + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT CHAR8 SerialNumber[9]; ///< Serial Number. + OUT CHAR8 PartNumber[19]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed +} TYPE17_DMI_INFO; + +/// Memory DMI Type 17 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceLocator; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT UINT8 BankLocator; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT UINT8 SerialNumber[4]; ///< Serial Number. + OUT UINT8 PartNumber[18]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed +} MEM_DMI_PHYSICAL_DIMM_INFO; + +/// Memory DMI Type 20 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} MEM_DMI_LOGICAL_DIMM_INFO; + +/// DMI Type 19 - Memory Array Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, + ///< of a range of memory mapped to the + ///< specified physical memory array. + OUT UINT32 EndingAddr; ///< The physical ending address of the + ///< last kilobyte of a range of addresses + ///< mapped to the specified physical memory array. + OUT UINT16 MemoryArrayHandle; ///< The handle, or instance number, associated + ///< with the physical memory array to which this + ///< address range is mapped. + OUT UINT8 PartitionWidth; ///< Identifies the number of memory devices that + ///< form a single row of memory for the address + ///< partition defined by this structure. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. + OUT UINT64 ExtEndingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. +} TYPE19_DMI_INFO; + +///DMI Type 20 - Memory Device Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated + ///< with the Memory Array Mapped Address structure to + ///< which this device address range is mapped. + OUT UINT8 PartitionRowPosition; ///< Identifies the position of the referenced Memory + ///< Device in a row of the address partition. + OUT UINT8 InterleavePosition; ///< The position of the referenced Memory Device in + ///< an interleave. + OUT UINT8 InterleavedDataDepth; ///< The maximum number of consecutive rows from the + ///< referenced Memory Device that are accessed in a + ///< single interleaved transfer. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} TYPE20_DMI_INFO; + +/// Collection of pointers to the DMI records +typedef struct { + OUT TYPE4_DMI_INFO T4[MAX_SOCKETS_SUPPORTED]; ///< Type 4 struc + OUT TYPE7_DMI_INFO T7L1[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 1 + OUT TYPE7_DMI_INFO T7L2[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 2 + OUT TYPE7_DMI_INFO T7L3[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 3 + OUT TYPE16_DMI_INFO T16; ///< Type 16 struc + OUT TYPE17_DMI_INFO T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc + OUT TYPE19_DMI_INFO T19; ///< Type 19 struc + OUT TYPE20_DMI_INFO T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc +} DMI_INFO; + +/********************************************************************** + * Interface call: AllocateExecutionCache + **********************************************************************/ +#define MAX_CACHE_REGIONS 3 + +/// AllocateExecutionCache sub param structure for cached memory region +typedef struct { + IN OUT UINT32 ExeCacheStartAddr; ///< Start address + IN OUT UINT32 ExeCacheSize; ///< Size +} EXECUTION_CACHE_REGION; + +/********************************************************************** + * Interface call: AmdGetAvailableExeCacheSize + **********************************************************************/ +/// Get available Cache remain +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 AvailableExeCacheSize; ///< Remain size +} AMD_GET_EXE_SIZE_PARAMS; + +AGESA_STATUS +AmdGetAvailableExeCacheSize ( + IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams + ); + +/// Selection type for core leveling +typedef enum { + CORE_LEVEL_LOWEST, ///< Level to lowest common denominator + CORE_LEVEL_TWO, ///< Level to 2 cores + CORE_LEVEL_POWER_OF_TWO, ///< Level to 1,2,4 or 8 + CORE_LEVEL_NONE, ///< Do no leveling + CORE_LEVEL_COMPUTE_UNIT, ///< Level cores to one core per compute unit + CORE_LEVEL_COMPUTE_UNIT_TWO, ///< Level cores to two cores per compute unit + CORE_LEVEL_COMPUTE_UNIT_THREE, ///< Level cores to three cores per compute unit + CORE_LEVEL_ONE, ///< Level to 1 core + CORE_LEVEL_THREE, ///< Level to 3 cores + CORE_LEVEL_FOUR, ///< Level to 4 cores + CORE_LEVEL_FIVE, ///< Level to 5 cores + CORE_LEVEL_SIX, ///< Level to 6 cores + CORE_LEVEL_SEVEN, ///< Level to 7 cores + CORE_LEVEL_EIGHT, ///< Level to 8 cores + CORE_LEVEL_NINE, ///< Level to 9 cores + CORE_LEVEL_TEN, ///< Level to 10 cores + CORE_LEVEL_ELEVEN, ///< Level to 11 cores + CORE_LEVEL_TWELVE, ///< Level to 12 cores + CORE_LEVEL_THIRTEEN, ///< Level to 13 cores + CORE_LEVEL_FOURTEEN, ///< Level to 14 cores + CORE_LEVEL_FIFTEEN, ///< Level to 15 cores + CoreLevelModeMax ///< Used for bounds checking +} CORE_LEVELING_TYPE; + + + + + +/************************************************************************ + * + * AGESA Basic Level interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +/// AmdInitReset param structure +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region + IN FCH_RESET_INTERFACE FchInterface; ///< Interface for FCH configuration +} AMD_RESET_PARAMS; + +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ); + + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +/// InitEarly param structure +/// +/// Provide defaults or customizations to each service performed in AmdInitEarly. +/// +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< Execution Map Interface + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_CONFIGURATION GnbConfig; ///< GNB configuration +} AMD_EARLY_PARAMS; + +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ); + + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +/// AmdInitPost param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN GNB_POST_CONFIGURATION GnbPostConfig; ///< GNB post param +} AMD_POST_PARAMS; + +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ); + + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +/// AmdInitEnv param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_ENV_CONFIGURATION GnbEnvConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_ENV_PARAMS; + +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ); + + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +/// AmdInitMid param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_MID_CONFIGURATION GnbMidConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_MID_PARAMS; + +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ); + + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +/// AmdInitLate param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *IvrsExclusionRangeList; ///< Pointer to array of exclusion ranges + OUT DMI_INFO *DmiTable; ///< DMI Interface + OUT VOID *AcpiPState; ///< Acpi Pstate SSDT Table + OUT VOID *AcpiSrat; ///< SRAT Table + OUT VOID *AcpiSlit; ///< SLIT Table + OUT VOID *AcpiWheaMce; ///< WHEA MCE Table + OUT VOID *AcpiWheaCmc; ///< WHEA CMC Table + OUT VOID *AcpiAlib; ///< ACPI SSDT table with ALIB implementation + OUT VOID *AcpiIvrs; ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table + OUT VOID *AcpiCrat; ///< Component Resource Affinity Table table + OUT VOID *AcpiCdit; ///< Component Locality Distance Information table + IN GNB_LATE_CONFIGURATION GnbLateConfiguration; ///< GNB configuration +} AMD_LATE_PARAMS; + +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ); + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +/// CPU Recovery Parameters +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. +} AMD_CPU_RECOVERY_PARAMS; + +/// AmdInitRecovery param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region. And the max cache region is 3 + IN AMD_CPU_RECOVERY_PARAMS CpuRecoveryParams; ///< Params for CPU related recovery init. +} AMD_RECOVERY_PARAMS; + +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ); + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +/// AmdInitResume param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics + IN AMD_S3_PARAMS S3DataBlock; ///< Save state data +} AMD_RESUME_PARAMS; + +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ); + + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +/// AmdS3LateRestore param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN AMD_S3_PARAMS S3DataBlock; ///< Save state data +} AMD_S3LATE_PARAMS; + +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ); + + +/********************************************************************** + * Interface call: AmdS3FinalRestore + **********************************************************************/ +/// AmdS3FinalRestore param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN AMD_S3_PARAMS S3DataBlock; ///< Save state data +} AMD_S3FINAL_PARAMS; + +AGESA_STATUS +AmdS3FinalRestore ( + IN OUT AMD_S3FINAL_PARAMS *S3FinalParams + ); + + +/********************************************************************** + * Interface call: AmdS3Save + **********************************************************************/ +/// AmdS3Save param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + OUT AMD_S3_PARAMS S3DataBlock; ///< Standard header + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_S3SAVE_PARAMS; + +AGESA_STATUS +AmdS3Save ( + IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams + ); + + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +/** + * Entry point for AP tasking. + */ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +); + +// +// General Services API +// + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +/// Request the APIC ID of a particular core. + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Core's Socket. + IN UINT8 Core; ///< The Core id. + OUT BOOLEAN IsPresent; ///< The Core is present, and ApicAddress is valid. + OUT UINT8 ApicAddress; ///< The Core's APIC ID. +} AMD_APIC_PARAMS; + +/** + * Get a specified Core's APIC ID. + */ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +); + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +/// Request the PCI Address of a Processor Module (that is, its Northbridge) + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Processor's socket + IN UINT8 Module; ///< The Module in that Processor + OUT BOOLEAN IsPresent; ///< The Core is present, and PciAddress is valid. + OUT PCI_ADDR PciAddress; ///< The Processor's PCI Config Space address (Function 0, Register 0) +} AMD_GET_PCI_PARAMS; + +/** + * Get Processor Module's PCI Config Space address. + */ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +); + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +/// Request the identity (Socket, Module, Core) of the current Processor Core + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT8 Socket; ///< The current Core's Socket + OUT UINT8 Module; ///< The current Core's Processor Module + OUT UINT8 Core; ///< The current Core's core id. +} AMD_IDENTIFY_PARAMS; + +/** + * "Who am I" for the current running core. + */ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +); + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +/// An Event Log Entry. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 EventClass; ///< The severity of this event, matches AGESA_STATUS. + OUT UINT32 EventInfo; ///< The unique event identifier, zero means "no event". + OUT UINT32 DataParam1; ///< Data specific to the Event. + OUT UINT32 DataParam2; ///< Data specific to the Event. + OUT UINT32 DataParam3; ///< Data specific to the Event. + OUT UINT32 DataParam4; ///< Data specific to the Event. +} EVENT_PARAMS; + +/** + * Read an Event from the Event Log. + */ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +); + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +/// Request the identity of dimm from system address + +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT64 MemoryAddress; ///< System Address that needs to be translated to dimm identification. + OUT UINT8 SocketId; ///< The socket on which the targeted address locates. + OUT UINT8 MemChannelId; ///< The channel on which the targeted address locates. + OUT UINT8 DimmId; ///< The dimm on which the targeted address locates. + OUT UINT8 ChipSelect; ///< The chip select on which the targeted address locates. + OUT UINT8 Bank; ///< The Bank for which the error address resides + OUT UINT32 Row; ///< The Row for which the error address resides + OUT UINT16 Column; ///< The Column for which the error address resides +} AMD_IDENTIFY_DIMM; + +/** + * Get the dimm identification for the address. + */ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +); + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ); + +/// Request the 2D Data Eye Training Data +#define RD_DATAEYE 0 +#define WR_DATAEYE 1 + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +/// Request the training data eye on Socket, Channel, Dimm. + +typedef struct _AMD_GET_DATAEYE { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT AMD_POST_PARAMS *PostParamsPtr; ///< Pointer to AMD_POST_PARAMS + IN UINT8 SocketId; ///< The socket number to get the 2D data eye + IN UINT8 MemChannelId; ///< The channel number to get the 2D data eye + IN UINT8 DimmId; ///< The dimm number to get the 2D data eye + IN UINT8 DataEyeType; ///< Get the 2D data eye on read or write training + OUT UINT8* DataEyeBuffer; ///< The buffer to stores the 2D data eye +} AMD_GET_DATAEYE; + +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ); + +#define AGESA_IDS_DFT_VAL 0xFFFF ///< Default value of every uninitlized NV item, the action for it will be ignored +#define AGESA_IDS_NV_END 0xFFFF ///< Flag specify end of option structure +/// WARNING: Don't change the comment below, it used as signature for script +/// AGESA IDS NV ID Definitions +typedef enum { + AGESA_IDS_EXT_ID_START = 0x0000,///< 0x0000 specify the start of external NV id + + AGESA_IDS_NV_UCODE, ///< 0x0001 Enable or disable microcode patching + + AGESA_IDS_NV_TARGET_PSTATE, ///< 0x0002 Set the P-state required to be activated + AGESA_IDS_NV_POSTPSTATE, ///< 0x0003 Set the P-state required to be activated through POST + + AGESA_IDS_NV_BANK_INTERLEAVE, ///< 0x0004 Enable or disable Bank Interleave + AGESA_IDS_NV_CHANNEL_INTERLEAVE, ///< 0x0005 Enable or disable Channel Interleave + AGESA_IDS_NV_NODE_INTERLEAVE, ///< 0x0006 Enable or disable Node Interleave + AGESA_IDS_NV_MEMHOLE, ///< 0x0007 Enables or disable memory hole + + AGESA_IDS_NV_SCRUB_REDIRECTION, ///< 0x0008 Enable or disable a write to dram with corrected data + AGESA_IDS_NV_DRAM_SCRUB, ///< 0x0009 Set the rate of background scrubbing for DRAM + AGESA_IDS_NV_DCACHE_SCRUB, ///< 0x000A Set the rate of background scrubbing for the DCache. + AGESA_IDS_NV_L2_SCRUB, ///< 0x000B Set the rate of background scrubbing for the L2 cache + AGESA_IDS_NV_L3_SCRUB, ///< 0x000C Set the rate of background scrubbing for the L3 cache + AGESA_IDS_NV_ICACHE_SCRUB, ///< 0x000D Set the rate of background scrubbing for the Icache + AGESA_IDS_NV_SYNC_ON_ECC_ERROR, ///< 0x000E Enable or disable the sync flood on un-correctable ECC error + AGESA_IDS_NV_ECC_SYMBOL_SIZE, ///< 0x000F Set ECC symbol size + + AGESA_IDS_NV_ALL_MEMCLKS, ///< 0x0010 Enable or disable all memory clocks enable + AGESA_IDS_NV_DCT_GANGING_MODE, ///< 0x0011 Set the Ganged mode + AGESA_IDS_NV_DRAM_BURST_LENGTH32, ///< 0x0012 Set the DRAM Burst Length 32 + AGESA_IDS_NV_MEMORY_POWER_DOWN, ///< 0x0013 Enable or disable Memory power down mode + AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE, ///< 0x0014 Set the Memory power down mode + AGESA_IDS_NV_DLL_SHUT_DOWN, ///< 0x0015 Enable or disable DLLShutdown + AGESA_IDS_NV_ONLINE_SPARE, ///< 0x0016 Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap + + AGESA_IDS_NV_HDTOUT, ///< 0x0017 Enable or disable HDTOUT feature + + AGESA_IDS_NV_GNBHDAUDIOEN, ///< 0x0018 Enable or disable GNB HD Audio + + AGESA_IDS_NV_CPB_EN, ///< 0x0019 Core Performance Boost + + AGESA_IDS_NV_HTC_EN, ///< 0x001A HTC Enable + AGESA_IDS_NV_HTC_OVERRIDE, ///< 0x001B HTC Override + AGESA_IDS_NV_HTC_PSTATE_LIMIT, ///< 0x001C HTC P-state limit select + AGESA_IDS_NV_HTC_TEMP_HYS, ///< 0x001D HTC Temperature Hysteresis + AGESA_IDS_NV_HTC_ACT_TEMP, ///< 0x001E HTC Activation Temp + + AGESA_IDS_NV_POWER_POLICY, ///< 0x001F Select Platform Power Policy + AGESA_IDS_NV_DRAMCON, ///< 0x0020 Specify the mode for controller initialization + AGESA_IDS_EXT_ID_END, ///< 0x0021 specify the end of external NV ID +} IDS_EX_NV_ID; + + +#define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1) + + +#endif // _AGESA_H_ diff --git a/src/vendorcode/amd/pi/00630F01/AMD.h b/src/vendorcode/amd/pi/00630F01/AMD.h new file mode 100644 index 0000000000..68f7c32818 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/AMD.h @@ -0,0 +1,475 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AMD_H_ +#define _AMD_H_ + +#define Int16FromChar(a,b) (UINT16)((a) << 0 | (b) << 8) +#define Int32FromChar(a,b,c,d) (UINT32)((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24) +#define Int64FromChar(a,b,c,d,e,f,g,h) ((UINT64)(Int32FromChar(a,b,c,d)<<32) | (UINT64)Int32FromChar(e,f,g,h)) + +#define AGESA_REVISION "Arch2008" +#define AGESA_ID {'A', 'G', 'E', 'S', 'A', 0x00, 0x00, 0x00} + +// +// +// AGESA Types and Definitions +// +// +#define LAST_ENTRY 0xFFFFFFFFul +#define IMAGE_SIGNATURE Int32FromChar ('$', 'A', 'M', 'D') +#define MODULE_SIGNATURE Int32FromChar ('$', 'M', 'O', 'D') +#define IOCF8 0xCF8 +#define IOCFC 0xCFC + +/// The return status for all AGESA public services. +/// +/// Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK +/// will have log entries with more detail. +/// +typedef enum { + AGESA_SUCCESS = 0, ///< The service completed normally. Info may be logged. + AGESA_UNSUPPORTED, ///< The dispatcher or create struct had an unimplemented function requested. + ///< Not logged. + AGESA_BOUNDS_CHK, ///< A dynamic parameter was out of range and the service was not provided. + ///< Example, memory address not installed, heap buffer handle not found. + ///< Not Logged. + // AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. + AGESA_ALERT, ///< An observed condition, but no loss of function. See Log. + AGESA_WARNING, ///< Possible or minor loss of function. See Log. + AGESA_ERROR, ///< Significant loss of function, boot may be possible. See Log. + AGESA_CRITICAL, ///< Continue boot only to notify user. See Log. + AGESA_FATAL, ///< Halt booting. See Log, however Fatal errors pertaining to heap problems + ///< may not be able to reliably produce log events. + AgesaStatusMax ///< Not a status, for limit checking. +} AGESA_STATUS; + +/// For checking whether a status is at or above the mandatory log level. +#define AGESA_STATUS_LOG_LEVEL AGESA_ALERT + +/** + * Callout method to the host environment. + * + * Callout using a dispatch with appropriate thunk layer, which is determined by the host environment. + * + * @param[in] Function The specific callout function being invoked. + * @param[in] FcnData Function specific data item. + * @param[in,out] ConfigPtr Reference to Callout params. + */ +typedef AGESA_STATUS (*CALLOUT_ENTRY) ( + IN UINT32 Function, + IN UINTN FcnData, + IN OUT VOID *ConfigPtr + ); + +typedef AGESA_STATUS (*IMAGE_ENTRY) (VOID *ConfigPtr); +typedef AGESA_STATUS (*MODULE_ENTRY) (VOID *ConfigPtr); + +///This allocation type is used by the AmdCreateStruct entry point +typedef enum { + PreMemHeap = 0, ///< Create heap in cache. + PostMemDram, ///< Create heap in memory. + ByHost ///< Create heap by Host. +} ALLOCATION_METHOD; + +/// These width descriptors are used by the library function, and others, to specify the data size +typedef enum ACCESS_WIDTH { + AccessWidth8 = 1, ///< Access width is 8 bits. + AccessWidth16, ///< Access width is 16 bits. + AccessWidth32, ///< Access width is 32 bits. + AccessWidth64, ///< Access width is 64 bits. + + AccessS3SaveWidth8 = 0x81, ///< Save 8 bits data. + AccessS3SaveWidth16, ///< Save 16 bits data. + AccessS3SaveWidth32, ///< Save 32 bits data. + AccessS3SaveWidth64, ///< Save 64 bits data. +} ACCESS_WIDTH; + +/// AGESA struct name +typedef enum { + // AGESA BASIC FUNCTIONS + AMD_INIT_RECOVERY = 0x00021000, ///< AmdInitRecovery entry point handle + AMD_CREATE_STRUCT = 0x00022000, ///< AmdCreateStruct handle + AMD_INIT_EARLY = 0x00023000, ///< AmdInitEarly entry point handle + AMD_INIT_ENV = 0x00024000, ///< AmdInitEnv entry point handle + AMD_INIT_LATE = 0x00025000, ///< AmdInitLate entry point handle + AMD_INIT_MID = 0x00026000, ///< AmdInitMid entry point handle + AMD_INIT_POST = 0x00027000, ///< AmdInitPost entry point handle + AMD_INIT_RESET = 0x00028000, ///< AmdInitReset entry point handle + AMD_INIT_RESUME = 0x00029000, ///< AmdInitResume entry point handle + AMD_RELEASE_STRUCT = 0x0002A000, ///< AmdReleaseStruct handle + AMD_S3LATE_RESTORE = 0x0002B000, ///< AmdS3LateRestore entry point handle + AMD_S3_SAVE = 0x0002C000, ///< AmdS3Save entry point handle + AMD_GET_APIC_ID = 0x0002D000, ///< AmdGetApicId entry point handle + AMD_GET_PCI_ADDRESS = 0x0002E000, ///< AmdGetPciAddress entry point handle + AMD_IDENTIFY_CORE = 0x0002F000, ///< AmdIdentifyCore general service handle + AMD_READ_EVENT_LOG = 0x00030000, ///< AmdReadEventLog general service handle + AMD_GET_EXECACHE_SIZE = 0x00031000, ///< AmdGetAvailableExeCacheSize general service handle + AMD_LATE_RUN_AP_TASK = 0x00032000, ///< AmdLateRunApTask entry point handle + AMD_IDENTIFY_DIMMS = 0x00033000, ///< AmdIdentifyDimm general service handle + AMD_GET_2D_DATA_EYE = 0x00034000, ///< AmdGet2DDataEye general service handle + AMD_S3FINAL_RESTORE = 0x00035000, ///< AmdS3FinalRestore entry point handle + AMD_HEAP_ALLOCATE_BUFFER = 0x00038000, + AMD_HEAP_DEALLOCATE_BUFFER = 0x00039000, + FCH_INIT_RESET = 0x00040000, + FCH_INIT_ENV = 0x00041000, + FCH_INIT_MID = 0x00042000, + FCH_INIT_LATE = 0x00043000, + FCH_INIT_S3_EARLY_RESTORE = 0x00044000, + FCH_INIT_S3_LATE_RESTORE = 0x00045000, + AMD_SET_VALUE = 0x00081000, + AMD_GET_VALUE = 0x00082000, +} AGESA_STRUCT_NAME; + + /* ResetType constant values */ +#define WARM_RESET_WHENEVER 1 +#define COLD_RESET_WHENEVER 2 +#define WARM_RESET_IMMEDIATELY 3 +#define COLD_RESET_IMMEDIATELY 4 + + +// AGESA Structures + +/// The standard header for all AGESA services. +/// For internal AGESA naming conventions, see @ref amdconfigparamname . +typedef struct { + IN VOID * ImageBasePtr; ///< The AGESA Image base address. + IN UINT32 Func; ///< The service desired + IN VOID * AltImageBasePtr; ///< Alternate Image location + IN CALLOUT_ENTRY CalloutPtr; ///< For Callout from AGESA + IN UINT8 HeapStatus; ///< For heap status from boot time slide. + IN UINT64 HeapBasePtr; ///< Location of the heap + IN OUT UINT8 Reserved[7]; ///< This space is reserved for future use. +} AMD_CONFIG_PARAMS; + + +/// Create Struct Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_STRUCT_NAME AgesaFunctionName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< How to handle buffer allocation + IN OUT UINT32 NewStructSize; ///< The size of the allocated data, in for ByHost, else out only. + IN OUT VOID *NewStructPtr; ///< The struct for the service. + ///< The struct to init for ByHost allocation, + ///< the initialized struct on return. +} AMD_INTERFACE_PARAMS; + +#define FUNC_0 0 // bit-placed for PCI address creation +#define FUNC_1 1 +#define FUNC_2 2 +#define FUNC_3 3 +#define FUNC_4 4 +#define FUNC_5 5 +#define FUNC_6 6 +#define FUNC_7 7 + +/// AGESA Binary module header structure +typedef struct { + IN UINT32 Signature; ///< Binary Signature + IN CHAR8 CreatorID[8]; ///< 8 characters ID + IN CHAR8 Version[12]; ///< 12 characters version + IN UINT32 ModuleInfoOffset; ///< Offset of module + IN UINT32 EntryPointAddress; ///< Entry address + IN UINT32 ImageBase; ///< Image base + IN UINT32 RelocTableOffset; ///< Relocate Table offset + IN UINT32 ImageSize; ///< Size + IN UINT16 Checksum; ///< Checksum + IN UINT8 ImageType; ///< Type + IN UINT8 V_Reserved; ///< Reserved +} AMD_IMAGE_HEADER; + +/// AGESA Binary module header structure +typedef struct _AMD_MODULE_HEADER { + IN UINT32 ModuleHeaderSignature; ///< Module signature + IN CHAR8 ModuleIdentifier[8]; ///< 8 characters ID + IN CHAR8 ModuleVersion[12]; ///< 12 characters version + IN VOID *ModuleDispatcher; ///< A pointer point to dispatcher + IN struct _AMD_MODULE_HEADER *NextBlock; ///< Next module header link +} AMD_MODULE_HEADER; + +// AMD_CODE_HEADER Signatures. +#define AGESA_CODE_SIGNATURE {'!', '!', '!', 'A', 'G', 'E', 'S', 'A'} +#define CIMXNB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'} +#define CIMXSB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'} + +/// AGESA_CODE_SIGNATURE +typedef struct { + IN CHAR8 Signature[8]; ///< code header Signature + IN CHAR8 ComponentName[16]; ///< 16 character name of the code module + IN CHAR8 Version[12]; ///< 12 character version string + IN CHAR8 TerminatorNull; ///< null terminated string + IN CHAR8 VerReserved[7]; ///< reserved space +} AMD_CODE_HEADER; + +/// Extended PCI address format +typedef struct { + IN OUT UINT32 Register:12; ///< Register offset + IN OUT UINT32 Function:3; ///< Function number + IN OUT UINT32 Device:5; ///< Device number + IN OUT UINT32 Bus:8; ///< Bus number + IN OUT UINT32 Segment:4; ///< Segment +} EXT_PCI_ADDR; + +/// Union type for PCI address +typedef union _PCI_ADDR { + IN UINT32 AddressValue; ///< Formal address + IN EXT_PCI_ADDR Address; ///< Extended address +} PCI_ADDR; + +// SBDFO - Segment Bus Device Function Offset +// 31:28 Segment (4-bits) +// 27:20 Bus (8-bits) +// 19:15 Device (5-bits) +// 14:12 Function(3-bits) +// 11:00 Offset (12-bits) + +#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \ + (((UINT32)(Dev)) << 15) | (((UINT32)(Fun)) << 12) | ((UINT32)(Off))) +#define ILLEGAL_SBDFO 0xFFFFFFFFul + +/// CPUID data received registers format +typedef struct { + OUT UINT32 EAX_Reg; ///< CPUID instruction result in EAX + OUT UINT32 EBX_Reg; ///< CPUID instruction result in EBX + OUT UINT32 ECX_Reg; ///< CPUID instruction result in ECX + OUT UINT32 EDX_Reg; ///< CPUID instruction result in EDX +} CPUID_DATA; + +// Topology Services definitions and macros +#define TOPOLOGY_LIST_TERMINAL 0xFF ///< End of list. + + +#ifndef BIT0 + #define BIT0 0x0000000000000001ull +#endif +#ifndef BIT1 + #define BIT1 0x0000000000000002ull +#endif +#ifndef BIT2 + #define BIT2 0x0000000000000004ull +#endif +#ifndef BIT3 + #define BIT3 0x0000000000000008ull +#endif +#ifndef BIT4 + #define BIT4 0x0000000000000010ull +#endif +#ifndef BIT5 + #define BIT5 0x0000000000000020ull +#endif +#ifndef BIT6 + #define BIT6 0x0000000000000040ull +#endif +#ifndef BIT7 + #define BIT7 0x0000000000000080ull +#endif +#ifndef BIT8 + #define BIT8 0x0000000000000100ull +#endif +#ifndef BIT9 + #define BIT9 0x0000000000000200ull +#endif +#ifndef BIT10 + #define BIT10 0x0000000000000400ull +#endif +#ifndef BIT11 + #define BIT11 0x0000000000000800ull +#endif +#ifndef BIT12 + #define BIT12 0x0000000000001000ull +#endif +#ifndef BIT13 + #define BIT13 0x0000000000002000ull +#endif +#ifndef BIT14 + #define BIT14 0x0000000000004000ull +#endif +#ifndef BIT15 + #define BIT15 0x0000000000008000ull +#endif +#ifndef BIT16 + #define BIT16 0x0000000000010000ull +#endif +#ifndef BIT17 + #define BIT17 0x0000000000020000ull +#endif +#ifndef BIT18 + #define BIT18 0x0000000000040000ull +#endif +#ifndef BIT19 + #define BIT19 0x0000000000080000ull +#endif +#ifndef BIT20 + #define BIT20 0x0000000000100000ull +#endif +#ifndef BIT21 + #define BIT21 0x0000000000200000ull +#endif +#ifndef BIT22 + #define BIT22 0x0000000000400000ull +#endif +#ifndef BIT23 + #define BIT23 0x0000000000800000ull +#endif +#ifndef BIT24 + #define BIT24 0x0000000001000000ull +#endif +#ifndef BIT25 + #define BIT25 0x0000000002000000ull +#endif +#ifndef BIT26 + #define BIT26 0x0000000004000000ull +#endif +#ifndef BIT27 + #define BIT27 0x0000000008000000ull +#endif +#ifndef BIT28 + #define BIT28 0x0000000010000000ull +#endif +#ifndef BIT29 + #define BIT29 0x0000000020000000ull +#endif +#ifndef BIT30 + #define BIT30 0x0000000040000000ull +#endif +#ifndef BIT31 + #define BIT31 0x0000000080000000ull +#endif +#ifndef BIT32 + #define BIT32 0x0000000100000000ull +#endif +#ifndef BIT33 + #define BIT33 0x0000000200000000ull +#endif +#ifndef BIT34 + #define BIT34 0x0000000400000000ull +#endif +#ifndef BIT35 + #define BIT35 0x0000000800000000ull +#endif +#ifndef BIT36 + #define BIT36 0x0000001000000000ull +#endif +#ifndef BIT37 + #define BIT37 0x0000002000000000ull +#endif +#ifndef BIT38 + #define BIT38 0x0000004000000000ull +#endif +#ifndef BIT39 + #define BIT39 0x0000008000000000ull +#endif +#ifndef BIT40 + #define BIT40 0x0000010000000000ull +#endif +#ifndef BIT41 + #define BIT41 0x0000020000000000ull +#endif +#ifndef BIT42 + #define BIT42 0x0000040000000000ull +#endif +#ifndef BIT43 + #define BIT43 0x0000080000000000ull +#endif +#ifndef BIT44 + #define BIT44 0x0000100000000000ull +#endif +#ifndef BIT45 + #define BIT45 0x0000200000000000ull +#endif +#ifndef BIT46 + #define BIT46 0x0000400000000000ull +#endif +#ifndef BIT47 + #define BIT47 0x0000800000000000ull +#endif +#ifndef BIT48 + #define BIT48 0x0001000000000000ull +#endif +#ifndef BIT49 + #define BIT49 0x0002000000000000ull +#endif +#ifndef BIT50 + #define BIT50 0x0004000000000000ull +#endif +#ifndef BIT51 + #define BIT51 0x0008000000000000ull +#endif +#ifndef BIT52 + #define BIT52 0x0010000000000000ull +#endif +#ifndef BIT53 + #define BIT53 0x0020000000000000ull +#endif +#ifndef BIT54 + #define BIT54 0x0040000000000000ull +#endif +#ifndef BIT55 + #define BIT55 0x0080000000000000ull +#endif +#ifndef BIT56 + #define BIT56 0x0100000000000000ull +#endif +#ifndef BIT57 + #define BIT57 0x0200000000000000ull +#endif +#ifndef BIT58 + #define BIT58 0x0400000000000000ull +#endif +#ifndef BIT59 + #define BIT59 0x0800000000000000ull +#endif +#ifndef BIT60 + #define BIT60 0x1000000000000000ull +#endif +#ifndef BIT61 + #define BIT61 0x2000000000000000ull +#endif +#ifndef BIT62 + #define BIT62 0x4000000000000000ull +#endif +#ifndef BIT63 + #define BIT63 0x8000000000000000ull +#endif + +#endif // _AMD_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Dispatcher.h b/src/vendorcode/amd/pi/00630F01/Dispatcher.h new file mode 100644 index 0000000000..d14b419059 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Dispatcher.h @@ -0,0 +1,51 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Pushhigh Interface + * + * Contains interface to Pushhigh entry + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Legacy + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * *************************************************************************** + */ + +#ifndef _DISPATCHER_H_ +#define _DISPATCHER_H_ + +// AGESA function prototypes +AGESA_STATUS CALLCONV AmdAgesaDispatcher ( IN OUT VOID *ConfigPtr ); +AGESA_STATUS CALLCONV AmdAgesaCallout ( IN UINT32 Func, IN UINT32 Data, IN OUT VOID *ConfigPtr ); + +#endif // _DISPATCHER_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Include/Filecode.h b/src/vendorcode/amd/pi/00630F01/Include/Filecode.h new file mode 100644 index 0000000000..af31c46ab1 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/Filecode.h @@ -0,0 +1,781 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Collectively assign unique filecodes for assert and debug to each source file. + * + * Publish values for decorated filenames, which can be used for + * ASSERT and debug support using a preprocessor define like: + * @n <tt> \#define FILECODE MY_C_FILENAME_FILECODE </tt> @n + * This file serves as a reference for debugging to associate the code and filename. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 284995 $ @e \$Date: 2014-02-17 11:17:41 -0600 (Mon, 17 Feb 2014) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FILECODE_H_ +#define _FILECODE_H_ + +#define UNASSIGNED_FILE_FILECODE (0xFFFF) + +/// For debug use in any Platform's options C file. +/// Can be reused for platforms and image builds, since only one options file can be built. +#define PLATFORM_SPECIFIC_OPTIONS_FILECODE (0xBBBB) + + +#define PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE (0xA001) +#define PROC_GNB_GNBINITATEARLY_FILECODE (0xA017) +#define PROC_GNB_GNBINITATENV_FILECODE (0xA020) +#define PROC_GNB_GNBINITATLATE_FILECODE (0xA021) +#define PROC_GNB_GNBINITATMID_FILECODE (0xA022) +#define PROC_GNB_GNBINITATPOST_FILECODE (0xA023) +#define PROC_GNB_GNBINITATRESET_FILECODE (0xA024) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE (0xA025) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE (0xA026) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE (0xA027) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE (0xA028) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE (0xA029) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE (0xA02A) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE (0xA030) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE (0xA031) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE (0xA032) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXPOWERPLAYTABLE_FILECODE (0xA033) +#define PROC_GNB_MODULES_GNBNBINITLIBV1_GNBNBINITLIBV1_FILECODE (0xA034) +#define PROC_GNB_MODULES_GNBPCIEALIBV1_PCIEALIB_FILECODE (0xA035) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE (0xA036) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE (0xA037) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE (0xA038) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE (0xA039) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE (0xA03B) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMEXITLATENCY_FILECODE (0xA03C) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPHYSERVICES_FILECODE (0xA03D) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE (0xA03E) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE (0xA03F) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE (0xA041) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPOWERMGMT_FILECODE (0xA043) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIESILICONSERVICES_FILECODE (0xA045) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE (0xA046) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE (0xA047) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE (0xA048) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE (0xA049) +#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIETRAINING_FILECODE (0xA04A) +#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIEWORKAROUNDS_FILECODE (0xA04B) +#define PROC_GNB_MODULES_GNBPCIECOMMCLKCFG_PCIECOMMCLKCFG_FILECODE (0xA04C) + +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE (0xA08E) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE (0xA08F) +#define PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE (0xA090) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE (0xA091) +#define PROC_GNB_MODULES_GNBINITTN_GFXENVINITTN_FILECODE (0xA092) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGLIB_FILECODE (0xA093) +#define PROC_GNB_MODULES_GNBINITTN_GFXGMCINITTN_FILECODE (0xA094) +#define PROC_GNB_MODULES_GNBINITTN_GFXINTEGRATEDINFOTABLETN_FILECODE (0xA095) +#define PROC_GNB_MODULES_GNBINITTN_GFXLIBTN_FILECODE (0xA096) +#define PROC_GNB_MODULES_GNBINITTN_GFXMIDINITTN_FILECODE (0xA097) +#define PROC_GNB_MODULES_GNBINITTN_GNBPOSTINITTN_FILECODE (0xA098) +#define PROC_GNB_MODULES_GNBINITTN_GNBEARLYINITTN_FILECODE (0xA09A) +#define PROC_GNB_MODULES_GNBINITTN_GNBENVINITTN_FILECODE (0xA09B) +#define PROC_GNB_MODULES_GNBINITTN_GNBFUSETABLETN_FILECODE (0xA09C) +#define PROC_GNB_MODULES_GNBINITTN_GNBMIDINITTN_FILECODE (0xA09D) +#define PROC_GNB_MODULES_GNBINITTN_GFXPOSTINITTN_FILECODE (0xA09E) +#define PROC_GNB_MODULES_GNBINITTN_GNBREGISTERACCTN_FILECODE (0xA09F) +#define PROC_GNB_MODULES_GNBINITTN_PCIECONFIGTN_FILECODE (0xA0A0) +#define PROC_GNB_MODULES_GNBINITTN_PCIEEARLYINITTN_FILECODE (0xA0A1) +#define PROC_GNB_MODULES_GNBINITTN_PCIEENVINITTN_FILECODE (0xA0A2) +#define PROC_GNB_MODULES_GNBINITTN_PCIELIBTN_FILECODE (0xA0A3) +#define PROC_GNB_MODULES_GNBINITTN_PCIEMIDINITTN_FILECODE (0xA0A4) +#define PROC_GNB_MODULES_GNBINITTN_PCIEPOSTINITTN_FILECODE (0xA0A5) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEWRAPPERSERVICESV4_FILECODE (0xA0A6) +#define PROC_GNB_MODULES_GNBIOMMUIVRS_GNBIOMMUIVRS_FILECODE (0xA0A7) +#define PROC_GNB_MODULES_GNBIVRSLIB_GNBIVRSLIB_FILECODE (0xA0A8) +#define PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE (0xA0A9) +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE (0xA0AA) +#define PROC_GNB_MODULES_GNBINITTN_GNBIOMMUIVRSTN_FILECODE (0xA0AB) + +#define PROC_GNB_MODULES_GNBINITTN_PCIEPOWERGATETN_FILECODE (0xA0B8) +#define PROC_GNB_MODULES_GNBINITTN_PCIEALIBTNFS1_FILECODE (0xA0B9) +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE (0xA0BA) +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE (0xA0BB) +#define PROC_GNB_MODULES_GNBSBIOMMULIB_GNBSBIOMMULIB_FILECODE (0xA0BC) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBTIMERLIB_FILECODE (0xA0BD) +#define PROC_GNB_MODULES_GNBSSOCKETLIB_GNBSSOCKETLIB_FILECODE (0xA0BF) +#define PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE (0xA0C0) +#define PROC_GNB_MODULES_GNBINITTN_GNBBAPMCOEFFCALCTN_FILECODE (0xA0C1) +#define PROC_GNB_MODULES_GNBPCIEASPM_PCIEASPM_FILECODE (0xA0C2) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEASPMEXITLATENCYV5_FILECODE (0xA0C5) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE (0xA0C6) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE (0xA0C7) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPOWERMGMTV5_FILECODE (0xA0C8) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE (0xA0C9) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE (0xA0CA) +#define PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE (0xA0CB) + +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE (0xA0DB) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPOWERMGMTV4_FILECODE (0xA0DC) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE (0xA0DD) + +#define PROC_GNB_MODULES_GNBINITTN_PCIEALIBTNFM2_FILECODE (0xA0DF) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGMID_FILECODE (0xA0E0) + +#define PROC_GNB_MODULES_GNBIOAPIC_GNBIOAPIC_FILECODE (0xA0EE) + +#define PROC_GNB_MODULES_GNBPCIEMAXPAYLOAD_PCIEMAXPAYLOAD_FILECODE (0xA0F4) +#define PROC_GNB_MODULES_GNBPCIECLKPM_PCIECLKPM_FILECODE (0xA0F5) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIETOPOLOGYSERVICESV5_FILECODE (0xA100) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIETRAININGV2_FILECODE (0xA101) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIEWORKAROUNDSV2_FILECODE (0xA102) + +#define PROC_RECOVERY_GNB_GNBRECOVERY_FILECODE (0xAE01) +#define PROC_RECOVERY_GNB_NBINITRECOVERY_FILECODE (0xAE02) +#define PROC_GNB_GNBINITATS3SAVE_FILECODE (0xAE03) +#define PROC_GNB_MODULES_GNBSVIEW_GNBSVIEW_FILECODE (0xAE04) + +#define PROC_GNB_MODULES_GNBINITKV_GFXENVINITKV_FILECODE (0xAE05) +#define PROC_GNB_MODULES_GNBINITKV_GFXINTEGRATEDINFOTABLEKV_FILECODE (0xAE06) +#define PROC_GNB_MODULES_GNBINITKV_GFXMIDINITKV_FILECODE (0xAE07) +#define PROC_GNB_MODULES_GNBINITKV_GFXPOSTINITKV_FILECODE (0xAE08) +#define PROC_GNB_MODULES_GNBINITKV_GNBEARLYINITKV_FILECODE (0xAE09) +#define PROC_GNB_MODULES_GNBINITKV_GNBENVINITKV_FILECODE (0xAE0A) +#define PROC_GNB_MODULES_GNBINITKV_GNBIOMMUIVRSKV_FILECODE (0xAE0B) +#define PROC_GNB_MODULES_GNBINITKV_GNBMIDINITKV_FILECODE (0xAE0C) +#define PROC_GNB_MODULES_GNBINITKV_GNBPOSTINITKV_FILECODE (0xAE0D) +#define PROC_GNB_MODULES_GNBINITKV_GNBREGISTERACCKV_FILECODE (0xAE0E) +#define PROC_GNB_MODULES_GNBINITKV_PCIECOMPLEXDATAKV_FILECODE (0xAE0F) +#define PROC_GNB_MODULES_GNBINITKV_PCIECONFIGKV_FILECODE (0xAE10) +#define PROC_GNB_MODULES_GNBINITKV_PCIEEARLYINITKV_FILECODE (0xAE11) +#define PROC_GNB_MODULES_GNBINITKV_PCIEENVINITKV_FILECODE (0xAE12) +#define PROC_GNB_MODULES_GNBINITKV_PCIELIBKV_FILECODE (0xAE13) +#define PROC_GNB_MODULES_GNBINITKV_PCIEMIDINITKV_FILECODE (0xAE14) +#define PROC_GNB_MODULES_GNBINITKV_PCIEPOSTINITKV_FILECODE (0xAE15) +#define PROC_GNB_MODULES_GNBINITKV_GFXLIBKV_FILECODE (0xAE16) +#define PROC_GNB_MODULES_GNBIOMMUSCRATCH_GNBIOMMUSCRATCH_FILECODE (0xAE18) +#define PROC_GNB_MODULES_GNBINITKV_GFXGMCINITKV_FILECODE (0xAE19) +#define PROC_GNB_MODULES_GNBSMULIBV7_GNBSMUINITLIBV7_FILECODE (0xAE1A) +#define PROC_GNB_MODULES_GNBINITKV_GNBSMUBIOSTABLEKV_FILECODE (0xAE1B) +#define PROC_GNB_MODULES_GNBINITKV_PCIEPOWERGATEKV_FILECODE (0xAE1C) + +#define PROC_GNB_MODULES_GNBPCIEALIBV2_PCIEALIBV2_FILECODE (0xAE33) +#define PROC_GNB_MODULES_GNBINITKV_ALIBKVD_FILECODE (0xAE34) +#define PROC_GNB_MODULES_GNBINITKV_ALIBKVM_FILECODE (0xAE35) +#define PROC_GNB_MODULES_GNBINITKV_GNBFUSETABLEKV_FILECODE (0xAE39) +#define PROC_GNB_MODULES_GNBURALIBV1_GNBURALIBV1_FILECODE (0xAE3A) +#define PROC_GNB_MODULES_GNBINITKV_GNBURAKV_FILECODE (0xAE3B) +#define PROC_GNB_MODULES_GNBINITKV_GNBURATOKENMAPKV_FILECODE (0xAE3C) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXLIBV3_FILECODE (0xAE41) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXINTEGRATEDINFOTABLE_FILECODE (0xAE42) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXPWRPLAYTABLE_FILECODE (0xAE43) +#define PROC_GNB_MODULES_GNBSCSLIBV1_GNBSCSLIBV1_FILECODE (0xAE44) + +// FCH +#define PROC_FCH_AZALIA_AZALIARESET_FILECODE (0xB001) +#define PROC_FCH_AZALIA_AZALIAENV_FILECODE (0xB002) +#define PROC_FCH_AZALIA_AZALIAMID_FILECODE (0xB003) +#define PROC_FCH_AZALIA_AZALIALATE_FILECODE (0xB004) +#define PROC_FCH_COMMON_ACPILIB_FILECODE (0xB010) +#define PROC_FCH_COMMON_FCHLIB_FILECODE (0xB011) +#define PROC_FCH_COMMON_FCHCOMMON_FILECODE (0xB012) +#define PROC_FCH_COMMON_FCHCOMMONSMM_FILECODE (0xB013) +#define PROC_FCH_COMMON_MEMLIB_FILECODE (0xB014) +#define PROC_FCH_COMMON_PCILIB_FILECODE (0xB015) +#define PROC_FCH_COMMON_FCHPELIB_FILECODE (0xB016) +#define PROC_FCH_GEC_GECRESET_FILECODE (0xB020) +#define PROC_FCH_GEC_GECENV_FILECODE (0xB021) +#define PROC_FCH_GEC_GECMID_FILECODE (0xB022) +#define PROC_FCH_GEC_GECLATE_FILECODE (0xB023) +#define PROC_FCH_GEC_FAMILY_HUDSON2_HUDSON2GECSERVICE_FILECODE (0xB024) +#define PROC_FCH_GEC_FAMILY_HUDSON2_HUDSON2GECENVSERVICE_FILECODE (0xB025) +#define PROC_FCH_HWACPI_HWACPIRESET_FILECODE (0xB030) +#define PROC_FCH_HWACPI_HWACPIENV_FILECODE (0xB031) +#define PROC_FCH_HWACPI_HWACPIMID_FILECODE (0xB032) +#define PROC_FCH_HWACPI_HWACPILATE_FILECODE (0xB033) +#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPIENVSERVICE_FILECODE (0xB034) +#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPIMIDSERVICE_FILECODE (0xB035) +#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPILATESERVICE_FILECODE (0xB036) +#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2SSSERVICE_FILECODE (0xB037) +#define PROC_FCH_HWM_HWMRESET_FILECODE (0xB050) +#define PROC_FCH_HWM_HWMENV_FILECODE (0xB051) +#define PROC_FCH_HWM_HWMMID_FILECODE (0xB052) +#define PROC_FCH_HWM_HWMLATE_FILECODE (0xB053) +#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMENVSERVICE_FILECODE (0xB054) +#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMMIDSERVICE_FILECODE (0xB055) +#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMLATESERVICE_FILECODE (0xB056) +#define PROC_FCH_IMC_IMCENV_FILECODE (0xB060) +#define PROC_FCH_IMC_IMCMID_FILECODE (0xB061) +#define PROC_FCH_IMC_IMCLATE_FILECODE (0xB062) +#define PROC_FCH_IMC_IMCLIB_FILECODE (0xB063) +#define PROC_FCH_IMC_IMCRESET_FILECODE (0xB064) +#define PROC_FCH_IMC_FCHECENV_FILECODE (0xB065) +#define PROC_FCH_IMC_FCHECMID_FILECODE (0xB066) +#define PROC_FCH_IMC_FCHECLATE_FILECODE (0xB067) +#define PROC_FCH_IMC_FCHECRESET_FILECODE (0xB068) +#define PROC_FCH_IMC_FAMILY_HUDSON2_HUDSON2IMCSERVICE_FILECODE (0xB069) +#define PROC_FCH_IDE_IDEENV_FILECODE (0xB06D) +#define PROC_FCH_IDE_IDEMID_FILECODE (0xB06E) +#define PROC_FCH_IDE_IDELATE_FILECODE (0xB06F) +#define PROC_FCH_INTERFACE_INITRESETDEF_FILECODE (0xB070) +#define PROC_FCH_INTERFACE_INITENVDEF_FILECODE (0xB071) +#define PROC_FCH_INTERFACE_FCHINITRESET_FILECODE (0xB072) +#define PROC_FCH_INTERFACE_FCHINITENV_FILECODE (0xB073) +#define PROC_FCH_INTERFACE_FCHINITLATE_FILECODE (0xB074) +#define PROC_FCH_INTERFACE_FCHINITMID_FILECODE (0xB075) +#define PROC_FCH_INTERFACE_FCHINITS3_FILECODE (0xB076) +#define PROC_FCH_INTERFACE_FCHTASKLAUNCHER_FILECODE (0xB077) +#define PROC_FCH_IR_IRENV_FILECODE (0xB080) +#define PROC_FCH_IR_IRMID_FILECODE (0xB081) +#define PROC_FCH_IR_IRLATE_FILECODE (0xB082) +#define PROC_FCH_PCIB_PCIBRESET_FILECODE (0xB090) +#define PROC_FCH_PCIB_PCIBENV_FILECODE (0xB091) +#define PROC_FCH_PCIB_PCIBMID_FILECODE (0xB092) +#define PROC_FCH_PCIB_PCIBLATE_FILECODE (0xB093) +#define PROC_FCH_PCIE_ABRESET_FILECODE (0xB0A0) +#define PROC_FCH_PCIE_ABENV_FILECODE (0xB0A1) +#define PROC_FCH_PCIE_ABMID_FILECODE (0xB0A2) +#define PROC_FCH_PCIE_ABLATE_FILECODE (0xB0A3) +#define PROC_FCH_PCIE_GPPHP_FILECODE (0xB0A4) +#define PROC_FCH_PCIE_GPPLIB_FILECODE (0xB0A5) +#define PROC_FCH_PCIE_GPPRESET_FILECODE (0xB0A6) +#define PROC_FCH_PCIE_GPPENV_FILECODE (0xB0A7) +#define PROC_FCH_PCIE_GPPMID_FILECODE (0xB0A8) +#define PROC_FCH_PCIE_GPPLATE_FILECODE (0xB0A9) +#define PROC_FCH_PCIE_PCIERESET_FILECODE (0xB0AA) +#define PROC_FCH_PCIE_PCIEENV_FILECODE (0xB0AB) +#define PROC_FCH_PCIE_PCIEMID_FILECODE (0xB0AC) +#define PROC_FCH_PCIE_PCIELATE_FILECODE (0xB0AD) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABRESETSERVICE_FILECODE (0xB0AE) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABENVSERVICE_FILECODE (0xB0AF) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABSERVICE_FILECODE (0xB0B0) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPRESETSERVICE_FILECODE (0xB0B1) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPSERVICE_FILECODE (0xB0B2) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIEENVSERVICE_FILECODE (0xB0B3) +#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIESERVICE_FILECODE (0xB0B4) +#define PROC_FCH_SATA_AHCIENV_FILECODE (0xB0C0) +#define PROC_FCH_SATA_AHCIMID_FILECODE (0xB0C1) +#define PROC_FCH_SATA_AHCILATE_FILECODE (0xB0C2) +#define PROC_FCH_SATA_AHCILIB_FILECODE (0xB0C3) +#define PROC_FCH_SATA_IDE2AHCIENV_FILECODE (0xB0C4) +#define PROC_FCH_SATA_IDE2AHCIMID_FILECODE (0xB0C5) +#define PROC_FCH_SATA_IDE2AHCILATE_FILECODE (0xB0C6) +#define PROC_FCH_SATA_IDE2AHCILIB_FILECODE (0xB0C7) +#define PROC_FCH_SATA_RAIDENV_FILECODE (0xB0C8) +#define PROC_FCH_SATA_RAIDMID_FILECODE (0xB0C9) +#define PROC_FCH_SATA_RAIDLATE_FILECODE (0xB0CA) +#define PROC_FCH_SATA_RAIDLIB_FILECODE (0xB0CB) +#define PROC_FCH_SATA_SATAENV_FILECODE (0xB0CC) +#define PROC_FCH_SATA_SATAENVLIB_FILECODE (0xB0CD) +#define PROC_FCH_SATA_SATAIDEENV_FILECODE (0xB0CE) +#define PROC_FCH_SATA_SATAIDEMID_FILECODE (0xB0CF) +#define PROC_FCH_SATA_SATAIDELATE_FILECODE (0xB0D0) +#define PROC_FCH_SATA_SATAIDELIB_FILECODE (0xB0D1) +#define PROC_FCH_SATA_SATAMID_FILECODE (0xB0D2) +#define PROC_FCH_SATA_SATALATE_FILECODE (0xB0D3) +#define PROC_FCH_SATA_SATALIB_FILECODE (0xB0D4) +#define PROC_FCH_SATA_SATARESET_FILECODE (0xB0D5) +#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATARESETSERVICE_FILECODE (0xB0D6) +#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATAENVSERVICE_FILECODE (0xB0D7) +#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATASERVICE_FILECODE (0xB0D8) +#define PROC_FCH_SD_SDENV_FILECODE (0xB0E0) +#define PROC_FCH_SD_SDMID_FILECODE (0xB0E1) +#define PROC_FCH_SD_SDLATE_FILECODE (0xB0E2) +#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDSERVICE_FILECODE (0xB0E3) +#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDRESETSERVICE_FILECODE (0xB0E4) +#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDENVSERVICE_FILECODE (0xB0E5) +#define PROC_FCH_SPI_LPCRESET_FILECODE (0xB0F0) +#define PROC_FCH_SPI_LPCENV_FILECODE (0xB0F1) +#define PROC_FCH_SPI_LPCMID_FILECODE (0xB0F2) +#define PROC_FCH_SPI_LPCLATE_FILECODE (0xB0F3) +#define PROC_FCH_SPI_SPIRESET_FILECODE (0xB0F4) +#define PROC_FCH_SPI_SPIENV_FILECODE (0xB0F5) +#define PROC_FCH_SPI_SPIMID_FILECODE (0xB0F6) +#define PROC_FCH_SPI_SPILATE_FILECODE (0xB0F7) +#define PROC_FCH_SPI_FAMILY_HUDSON2_HUDSON2LPCENVSERVICE_FILECODE (0xB0F8) +#define PROC_FCH_SPI_FAMILY_HUDSON2_HUDSON2LPCRESETSERVICE_FILECODE (0xB0F9) +#define PROC_FCH_USB_EHCIRESET_FILECODE (0xB100) +#define PROC_FCH_USB_EHCIENV_FILECODE (0xB101) +#define PROC_FCH_USB_EHCIMID_FILECODE (0xB102) +#define PROC_FCH_USB_EHCILATE_FILECODE (0xB103) +#define PROC_FCH_USB_OHCIRESET_FILECODE (0xB104) +#define PROC_FCH_USB_OHCIENV_FILECODE (0xB105) +#define PROC_FCH_USB_OHCIMID_FILECODE (0xB106) +#define PROC_FCH_USB_OHCILATE_FILECODE (0xB107) +#define PROC_FCH_USB_USBRESET_FILECODE (0xB108) +#define PROC_FCH_USB_USBENV_FILECODE (0xB109) +#define PROC_FCH_USB_USBMID_FILECODE (0xB10A) +#define PROC_FCH_USB_USBLATE_FILECODE (0xB10B) +#define PROC_FCH_USB_XHCIRESET_FILECODE (0xB10C) +#define PROC_FCH_USB_XHCIENV_FILECODE (0xB10D) +#define PROC_FCH_USB_XHCIMID_FILECODE (0xB10E) +#define PROC_FCH_USB_XHCILATE_FILECODE (0xB10F) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIENVSERVICE_FILECODE (0xB110) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIMIDSERVICE_FILECODE (0xB111) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCILATESERVICE_FILECODE (0xB112) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIENVSERVICE_FILECODE (0xB113) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIMIDSERVICE_FILECODE (0xB114) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCILATESERVICE_FILECODE (0xB115) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIRESETSERVICE_FILECODE (0xB116) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIENVSERVICE_FILECODE (0xB117) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIMIDSERVICE_FILECODE (0xB118) +#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCILATESERVICE_FILECODE (0xB119) +#define PROC_FCH_USB_XHCIRECOVERY_FILECODE (0xB12E) +#define PROC_FCH_PCIE_GPPPORTINIT_FILECODE (0xB12F) +#define PROC_FCH_SPI_FAMILY_YUBA_YUBALPCRESETSERVICE_FILECODE (0xB160) +#define UEFI_DXE_FCHDXE_FCHDXE_FILECODE (0xB200) +#define UEFI_DXE_FCHDXE_USBOC_FILECODE (0xB201) +#define UEFI_DXE_FCHDXEAUX_DXEGPIO_FILECODE (0xB202) +#define UEFI_DXE_FCHDXEAUX_DXEGPIOREAD_FILECODE (0xB203) +#define UEFI_DXE_FCHDXELPCCLKRUN_FCHDXELPCCLKRUN_FILECODE (0xB204) +#define UEFI_DXE_AMDFCHWHEA_AMDFCHWHEA_FILECODE (0xB210) +#define UEFI_DXE_AMDFCHWHEA_AMDFCHWHEAEINJ_FILECODE (0xB211) +#define UEFI_DXE_AMDFCHWHEA_AMDFCHWHEAHEST_FILECODE (0xB212) +#define UEFI_DXE_FCHDXEAUX_DXEDISUSBPORT_FILECODE (0xB213) +#define UEFI_DXE_FCHDXEAUX_DXEBOOTTIMER_FILECODE (0xB214) +#define UEFI_DXE_FCHDXEAUX_DXEESATAPORT_FILECODE (0xB215) +#define UEFI_DXE_AMDFCHHWM_AMDFCHHWM_FILECODE (0xB216) +#define UEFI_DXE_AMDIGPUVGACONTROLDXE_AMDIGPUVGACONTROLDXE_FILECODE (0xB218) +#define UEFI_DXE_CF9RESET_CF9RESET_FILECODE (0xB220) +#define UEFI_DXE_CF9RESET_IA32_IA32CF9RESET_FILECODE (0xB221) +#define UEFI_DXE_CF9RESET_X64_X64CF9RESET_FILECODE (0xB222) +#define UEFI_DXE_FCHDXEMMIO_FCHDXEMMIO_FILECODE (0xB223) +#define UEFI_DXE_LEGACYINTERRUPT_LEGACYINTERRUPT_FILECODE (0xB230) +#define UEFI_DXE_FCHACPICS_FCHACPICS_FILECODE (0xB231) +#define UEFI_DXE_FCHACPICS_FCHACPICSAML_FILECODE (0xB232) +#define UEFI_DXE_FCHACPICS_FCHACPICSCONTROL_FILECODE (0xB233) +#define UEFI_DXE_FCHACPICS_FUNCTIONS_POWERBUTTON_POWERBUTTON_FILECODE (0xB234) +#define UEFI_DXE_FCHACPICS_FUNCTIONS_SMBUSNFC_SMBUSNFC_FILECODE (0xB235) +#define UEFI_DXE_SMMCONTROL_SMMCONTROL_FILECODE (0xB240) +#define UEFI_SMM_FCHSMMLIB_FCHDXECOMMON_FILECODE (0xB250) +#define UEFI_SMM_FCHSMMLIB_FCHSMMLIB_FILECODE (0xB251) +#define UEFI_DXE_FCHDXELIB_FCHDXELIB_FILECODE (0xB252) +#define UEFI_PEI_FCHPEI_FCHPEI_FILECODE (0xB260) +#define UEFI_PEI_FCHPEI_FCHRESET_FILECODE (0xB261) +#define UEFI_PEI_FCHPEI_FCHSTALL_FILECODE (0xB262) +#define UEFI_DXE_FCHDXEAUX_FCHDXEAUX_FILECODE (0xB263) +#define UEFI_PEI_FCHPEIAUX_FCHPEIAUX_FILECODE (0xB264) +#define UEFI_PEI_FCHPEILIB_FCHPEILIB_FILECODE (0xB265) +#define UEFI_PEI_FCHPEILIB_LIBAMDPEI_FILECODE (0xB266) +#define UEFI_PEI_FCHPEIAUX_PEIGPIO_FILECODE (0xB267) +#define UEFI_PEI_FCHPEIAUX_PEIGPIOREAD_FILECODE (0xB268) +#define UEFI_PEI_FCHPEIAUX_PEIDISUSBPORT_FILECODE (0xB269) +#define UEFI_PEI_FCHPEIAUX_PEIBOOTTIMER_FILECODE (0xB26A) +#define UEFI_PEI_FCHPEIAUX_PEIOSCOUTCLOCK_FILECODE (0xB26B) +#define UEFI_PEI_FCHPEI_FCHEHCIRECOVERY_FILECODE (0xB280) +#define UEFI_PEI_FCHPEI_FCHSATARECOVERY_FILECODE (0xB281) +#define UEFI_PEI_FCHPEI_FCHXHCIRECOVERY_FILECODE (0xB282) +#define UEFI_PEI_FCHPEI_FCHGPPRECOVERY_FILECODE (0xB283) +#define UEFI_PEI_SMBUS_SMBUS_FILECODE (0xB28A) +#define UEFI_SMM_FCHSMM_FCHSMM_FILECODE (0xB290) +#define UEFI_SMM_FCHSMMCOMPLEMENT_SDIOPOWER_SDIOPOWER_FILECODE (0xB291) +#define UEFI_SMM_FCHSMMCOMPLEMENT_USB3PORTPROTECTWA_USB3PORTPROTECTWA_FILECODE (0xB292) +#define UEFI_SMM_FCHSMM_GPESMI_FILECODE (0xB293) +#define UEFI_SMM_FCHSMM_IOTRAPSMI_FILECODE (0xB294) +#define UEFI_SMM_FCHSMM_MISCSMI_FILECODE (0xB295) +#define UEFI_SMM_FCHSMM_PERIODICTIMERSMI_FILECODE (0xB296) +#define UEFI_SMM_FCHSMM_POWERBUTTONSMI_FILECODE (0xB297) +#define UEFI_SMM_FCHSMM_SWSMI_FILECODE (0xB298) +#define UEFI_SMM_FCHSMM_SXSMI_FILECODE (0xB299) +#define UEFI_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROL_FILECODE (0xB29A) +#define UEFI_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROLLIB_FILECODE (0xB29B) +#define UEFI_SMM_FCHSMMCOMPLEMENT_USB3PORTPROTECTWA_LIBAMDSMMLIB_FILECODE (0xB29C) +#define UEFI_SMM_FCHSMMCOMPLEMENT_FCHPCIEWAKEWA_FCHPCIEWAKEWA_FILECODE (0xB29D) +#define UEFI_SMM_FCHSMMCOMPLEMENT_SDCLKDRIVINGLOWWA_SDCLKDRIVINGLOWWA_FILECODE (0xB29E) +#define UEFI_SMM_FCHSMMCOMPLEMENT_FCHSDVOLTAGESWITCH_FCHSDVOLTAGESWITCH_FILECODE (0xB29F) +#define UEFI_DXE_SMBUS_SMBUSLIGHT_FILECODE (0xB2A0) +#define UEFI_SMM_FCHSMMCOMPLEMENT_FCHIMCSPIWA_FCHIMCSPIWA_FILECODE (0xB2A1) +#define UEFI_SMM_FCHSMMCOMPLEMENT_FCHXHCD3WA_FCHXHCD3WA_FILECODE (0xB2A2) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMDISPATCHER_FILECODE (0xB2B0) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMGPEDISPATCHER_FCHSMMGPEDISPATCHER_FILECODE (0xB2B1) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMIOTRAPDISPATCHER_FCHSMMIOTRAPDISPATCHER_FILECODE (0xB2B2) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMMISCDISPATCHER_FCHSMMMISCDISPATCHER_FILECODE (0xB2B3) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMPERIODICALDISPATCHER_FCHSMMPERIODICALDISPATCHER_FILECODE (0xB2B4) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMPWRBTNDISPATCHER_FCHSMMPWRBTNDISPATCHER_FILECODE (0xB2B5) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMSWDISPATCHER_FCHSMMSWDISPATCHER_FILECODE (0xB2B6) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMSXDISPATCHER_FCHSMMSXDISPATCHER_FILECODE (0xB2B7) +#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMUSBDISPATCHER_FCHSMMUSBDISPATCHER_FILECODE (0xB2B8) +#define PROC_FCH_PCIE_GPPALLINONE_FILECODE (0xB2C0) +#define UEFI_SMM_MEMSMMLIB_MEMSMMLIB_FILECODE (0xB2C1) +#define UEFI_SMM_MEMSMMLIB_KV_DRAMMAPKV_FILECODE (0xB2C3) + +#define LIB_AMDLIB_FILECODE (0xC001) + +#define LEGACY_PROC_AGESACALLOUTS_FILECODE (0xC010) +#define LEGACY_PROC_HOBTRANSFER_FILECODE (0xC011) +#define LEGACY_PROC_DISPATCHER_FILECODE (0xC012) + +#define UEFI_DXE_AMDAGESADXEDRIVER_AMDAGESADXEDRIVER_FILECODE (0xC120) + +#define UEFI_PEI_AMDINITPOSTPEIM_AMDINITPOSTPEIM_FILECODE (0xC140) +#define UEFI_PEI_AMDPROCESSORINITPEIM_AMDPROCESSORINITPEIM_FILECODE (0xC141) +#define UEFI_PEI_AMDRESETMANAGER_AMDRESETMANAGER_FILECODE (0xC142) +#define UEFI_PROC_COMMON_HOBTRANSFERUEFI_FILECODE (0xC160) +#define UEFI_PROC_DXE_HOBTRANSFERUEFIDXE_FILECODE (0xC161) +#define UEFI_PROC_PEI_HOBTRANSFERUEFIPEI_FILECODE (0xC162) + +#define PROC_COMMON_AMDINITEARLY_FILECODE (0xC020) +#define PROC_COMMON_AMDINITENV_FILECODE (0xC021) +#define PROC_COMMON_AMDINITLATE_FILECODE (0xC022) +#define PROC_COMMON_AMDINITMID_FILECODE (0xC023) +#define PROC_COMMON_AMDINITPOST_FILECODE (0xC024) +#define PROC_COMMON_AMDINITRECOVERY_FILECODE (0xC025) +#define PROC_COMMON_AMDINITRESET_FILECODE (0xC026) +#define PROC_COMMON_AMDINITRESUME_FILECODE (0xC027) +#define PROC_COMMON_AMDS3LATERESTORE_FILECODE (0xC028) +#define PROC_COMMON_AMDS3SAVE_FILECODE (0xC029) +#define PROC_COMMON_AMDLATERUNAPTASK_FILECODE (0xC02A) +#define PROC_COMMON_AMDS3FINALRESTORE_FILECODE (0xC02B) + +#define PROC_COMMON_COMMONRETURNS_FILECODE (0xC0C0) +#define PROC_COMMON_CREATESTRUCT_FILECODE (0xC0D0) +#define PROC_COMMON_COMMONINITS_FILECODE (0xC0F0) +#define PROC_COMMON_S3RESTORESTATE_FILECODE (0xC0F8) +#define PROC_COMMON_S3SAVESTATE_FILECODE (0xC0F9) + +#define PROC_CPU_CPUAPICUTILITIES_FILECODE (0xC401) +#define PROC_CPU_TABLE_FILECODE (0xC403) +#define PROC_CPU_CPUEARLYINIT_FILECODE (0xC405) +#define PROC_CPU_CPUEVENTLOG_FILECODE (0xC406) +#define PROC_CPU_CPUFAMILYTRANSLATION_FILECODE (0xC407) +#define PROC_CPU_CPUGENERALSERVICES_FILECODE (0xC408) +#define PROC_CPU_CPULATEINIT_FILECODE (0xC40A) +#define PROC_CPU_CPUMICROCODEPATCH_FILECODE (0xC40B) +#define PROC_CPU_CPUWARMRESET_FILECODE (0xC40C) +#define PROC_CPU_HEAPMANAGER_FILECODE (0xC40D) +#define PROC_CPU_CPUBIST_FILECODE (0xC40E) +#define PROC_CPU_MMIOMAPMANAGER_FILECODE (0xC40F) + +#define PROC_CPU_CPUPOSTINIT_FILECODE (0xC420) +#define PROC_CPU_CPUPOWERMGMT_FILECODE (0xC430) +#define PROC_CPU_CPUPOWERMGMTMULTISOCKET_FILECODE (0xC431) +#define PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE (0xC432) +#define PROC_CPU_S3_FILECODE (0xC460) + +// Family 15h +#define PROC_CPU_FAMILY_0X15_CPUCOMMONF15UTILITIES_FILECODE (0xCB01) +#define PROC_CPU_FAMILY_0X15_CPUF15BRANDID_FILECODE (0xCB02) +#define PROC_CPU_FAMILY_0X15_CPUF15CACHEDEFAULTS_FILECODE (0xCB03) +#define PROC_CPU_FAMILY_0X15_CPUF15DMI_FILECODE (0xCB04) +#define PROC_CPU_FAMILY_0X15_CPUF15MSRTABLES_FILECODE (0xCB05) +#define PROC_CPU_FAMILY_0X15_CPUF15PCITABLES_FILECODE (0xCB06) +#define PROC_CPU_FAMILY_0X15_CPUF15POWERCHECK_FILECODE (0xCB07) +#define PROC_CPU_FAMILY_0X15_CPUF15UTILITIES_FILECODE (0xCB08) +#define PROC_CPU_FAMILY_0X15_CPUF15WHEAINITDATATABLES_FILECODE (0xCB09) +#define PROC_CPU_FAMILY_0X15_CPUF15APM_FILECODE (0xCB0A) +#define PROC_CPU_FAMILY_0X15_CPUF15CRAT_FILECODE (0xCB0B) +#define PROC_CPU_FAMILY_0X15_CPUF15MMIOMAP_FILECODE (0xCB0C) +#define PROC_CPU_FAMILY_0X15_CPUF15PREFETCHMODE_FILECODE (0xCB0D) + +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNCOREAFTERRESET_FILECODE (0xCB50) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNDMI_FILECODE (0xCB51) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNNBAFTERRESET_FILECODE (0xCB52) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNPSTATE_FILECODE (0xCB53) +#define PROC_CPU_FAMILY_0X15_TN_F15TNLOGICALIDTABLES_FILECODE (0xCB54) +#define PROC_CPU_FAMILY_0X15_TN_F15TNMICROCODEPATCHTABLES_FILECODE (0xCB55) +#define PROC_CPU_FAMILY_0X15_TN_F15TNMSRTABLES_FILECODE (0xCB56) +#define PROC_CPU_FAMILY_0X15_TN_F15TNSHAREDMSRTABLE_FILECODE (0xCB57) +#define PROC_CPU_FAMILY_0X15_TN_F15TNEQUIVALENCETABLE_FILECODE (0xCB58) +#define PROC_CPU_FAMILY_0X15_TN_F15TNPCITABLES_FILECODE (0xCB59) +#define PROC_CPU_FAMILY_0X15_TN_F15TNPOWERMGMTSYSTEMTABLES_FILECODE (0xCB5A) +#define PROC_CPU_FAMILY_0X15_TN_F15TNPOWERPLANE_FILECODE (0xCB5B) +#define PROC_CPU_FAMILY_0X15_TN_F15TNUTILITIES_FILECODE (0xCB5C) +#define PROC_CPU_FAMILY_0X15_TN_F15TNC6STATE_FILECODE (0xCB5D) +#define PROC_CPU_FAMILY_0X15_TN_F15TNCPB_FILECODE (0xCB5E) +#define PROC_CPU_FAMILY_0X15_TN_F15TNIOCSTATE_FILECODE (0xCB5F) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNCACHEFLUSHONHALT_FILECODE (0xCB60) +#define PROC_CPU_FAMILY_0X15_TN_F15TNINITEARLYTABLE_FILECODE (0xCB62) +#define PROC_CPU_FAMILY_0X15_TN_F15TNEARLYSAMPLES_FILECODE (0xCB63) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNPOWERCHECK_FILECODE (0xCB64) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNPSI_FILECODE (0xCB65) +#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNHTC_FILECODE (0xCB66) + +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVCOREAFTERRESET_FILECODE (0xCBE0) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVDMI_FILECODE (0xCBE1) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVNBAFTERRESET_FILECODE (0xCBE2) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVPSTATE_FILECODE (0xCBE3) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVLOGICALIDTABLES_FILECODE (0xCBE4) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVMICROCODEPATCHTABLES_FILECODE (0xCBE5) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVMSRTABLES_FILECODE (0xCBE6) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVSHAREDMSRTABLE_FILECODE (0xCBE7) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVEQUIVALENCETABLE_FILECODE (0xCBE8) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVPCITABLES_FILECODE (0xCBE9) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVPOWERMGMTSYSTEMTABLES_FILECODE (0xCBEA) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVBRANDID_FILECODE (0xCBEB) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVUTILITIES_FILECODE (0xCBEC) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVC6STATE_FILECODE (0xCBED) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVCPB_FILECODE (0xCBEE) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVIOCSTATE_FILECODE (0xCBEF) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVCACHEFLUSHONHALT_FILECODE (0xCBF0) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVHTC_FILECODE (0xCBF1) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVINITEARLYTABLE_FILECODE (0xCBF2) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVEARLYSAMPLES_FILECODE (0xCBF3) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVPOWERCHECK_FILECODE (0xCBF4) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVPSI_FILECODE (0xCBF5) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVSCS_FILECODE (0xCBF6) +#define PROC_CPU_FAMILY_0X15_KV_CPUF15KVCC6EXITCONTROL_FILECODE (0xCBF7) + +#define PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE (0xDC01) +#define PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE (0xDC02) +#define PROC_CPU_FEATURE_CPUDMI_FILECODE (0xDC10) +#define PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE (0xDC41) +#define PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE (0xDC42) +#define PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE (0xDC43) +#define PROC_CPU_FEATURE_CPUSLIT_FILECODE (0xDC50) +#define PROC_CPU_FEATURE_CPUSRAT_FILECODE (0xDC60) +#define PROC_CPU_FEATURE_CPUWHEA_FILECODE (0xDC70) +#define PROC_CPU_FEATURE_CPUC6STATE_FILECODE (0xDC82) +#define PROC_CPU_FEATURE_CPUCPB_FILECODE (0xDC83) +#define PROC_CPU_FEATURE_CPULOWPWRPSTATE_FILECODE (0xDC84) +#define PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE (0xDC85) +#define PROC_CPU_FEATURE_CPUAPM_FILECODE (0xDC86) +#define PROC_CPU_FEATURE_CPUFEATURES_FILECODE (0xDC90) +#define PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE (0xDCB0) +#define PROC_CPU_FEATURE_CPUPSI_FILECODE (0xDCC0) +#define PROC_CPU_FEATURE_CPUHTC_FILECODE (0xDCC1) +#define PROC_CPU_FEATURE_CPUCRAT_FILECODE (0xDCD0) +#define PROC_CPU_FEATURE_CPUCDIT_FILECODE (0xDCD1) +#define PROC_CPU_FEATURE_CPUPREFETCHMODE_FILECODE (0xDCD3) +#define PROC_CPU_FEATURE_CPUSCS_FILECODE (0xDCD4) +#define PROC_CPU_FEATURE_CPUCC6EXITCONTROL_FILECODE (0xDCD5) + +#define PROC_RECOVERY_CPU_CPURECOVERY_FILECODE (0xDE01) + +#define PROC_TOPOLOGY_TOPOMAIN_FILECODE (0xE001) +#define PROC_TOPOLOGY_TOPONB_FILECODE (0xE002) +#define PROC_TOPOLOGY_FAM15_TOPONBFAM15_FILECODE (0xE087) +#define PROC_TOPOLOGY_FAM15_TOPONBUTILITIESFAM15_FILECODE (0xE088) +#define PROC_TOPOLOGY_FAM16_TOPONBFAM16_FILECODE (0xE097) +#define PROC_TOPOLOGY_FAM16_TOPONBUTILITIESFAM16_FILECODE (0xE098) + +#define PROC_RECOVERY_TOPOLOGY_TOPOINITRECOVERY_FILECODE (0xE0FF) + +#define PROC_IDS_CONTROL_IDSCTRL_FILECODE (0xE801) +#define PROC_IDS_LIBRARY_IDSLIB_FILECODE (0xE802) +#define PROC_IDS_DEBUG_IDSDEBUG_FILECODE (0xE803) +#define PROC_IDS_PERF_IDSPERF_FILECODE (0xE804) +#define PROC_IDS_FAMILY_0X15_IDSF15ALLSERVICE_FILECODE (0xE80C) +#define PROC_IDS_FAMILY_0X15_TN_IDSF15TNALLSERVICE_FILECODE (0xE80F) +#define PROC_IDS_LIBRARY_IDSREGACC_FILECODE (0xE810) +#define PROC_IDS_DEBUG_IDSDPHDTOUT_FILECODE (0xE811) +#define PROC_IDS_DEBUG_IDSDEBUGPRINT_FILECODE (0xE812) +#define PROC_IDS_DEBUG_IDSDPSERIAL_FILECODE (0xE813) +#define PROC_IDS_DEBUG_IDSDPREDIRECTIO_FILECODE (0xE814) +#define PROC_IDS_DEBUG_IDSDPRAM_FILECODE (0xE815) + +#define PROC_IDS_DEBUG_IDSIDTTABLE_FILECODE (0xE81E) +#define PROC_IDS_CONTROL_IDSNVTOCMOS_FILECODE (0xE81F) +#define PROC_IDS_FAMILY_0X15_KV_IDSF15KVALLSERVICE_FILECODE (0xE820) + +///0xE820 ~ 0xE840 is reserved for ids extend module + +#define PROC_MEM_ARDK_MA_FILECODE (0xF001) + +#define PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE (0xF081) +#define PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE (0xF082) +#define PROC_MEM_FEAT_ECC_MFECC_FILECODE (0xF083) +#define PROC_MEM_FEAT_ECC_MFEMP_FILECODE (0xF085) +#define PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE (0xF086) +#define PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE (0xF088) +#define PROC_MEM_FEAT_INTLVRN_MFINTLVRN_FILECODE (0xF089) +#define PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE (0xF08A) +#define PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE (0xF08B) +#define PROC_MEM_FEAT_NDINTLV_MFNDI_FILECODE (0xF08C) +#define PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE (0xF08D) +#define PROC_MEM_FEAT_OLSPARE_MFSPR_FILECODE (0xF08E) +#define PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE (0xF08F) +#define PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE (0xF091) +#define PROC_MEM_FEAT_S3_MFS3_FILECODE (0xF092) +#define PROC_MEM_FEAT_TABLE_MFTDS_FILECODE (0xF093) +#define PROC_MEM_FEAT_CHINTLV_MFMCHI_FILECODE (0xF094) +#define PROC_MEM_FEAT_CRAT_MFCRAT_FILECODE (0xF095) +#define PROC_MEM_FEAT_AMP_MFAMP_FILECODE (0xF096) +#define PROC_MEM_FEAT_DATAEYE_MF2DDATAEYE_FILECODE (0xF097) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFWRDAT2DTRAINING_FILECODE (0xF098) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DEYERIMSEARCH_FILECODE (0xF099) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDDQS2DTRAINING_FILECODE (0xF09A) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DTRAINING_FILECODE (0xF09B) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DPATTERNGENERATION_FILECODE (0xF09C) +#define PROC_MEM_FEAT_AGGRESSOR_MFAGGRESSOR_FILECODE (0xF09F) +#define PROC_MEM_FEAT_DLLPDBYPASS_MFDLLPDBYPASS_FILECODE (0xF0A0) + +#define PROC_MEM_MAIN_MDEF_FILECODE (0xF101) +#define PROC_MEM_MAIN_MINIT_FILECODE (0xF102) +#define PROC_MEM_MAIN_MM_FILECODE (0xF103) +#define PROC_MEM_FEAT_DMI_MFDMI_FILECODE (0xF104) +#define PROC_MEM_MAIN_MMECC_FILECODE (0xF105) +#define PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE (0xF106) +#define PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE (0xF10B) +#define PROC_MEM_MAIN_MMONLINESPARE_FILECODE (0xF10C) +#define PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE (0xF10D) +#define PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE (0xF10E) +#define PROC_MEM_MAIN_MUC_FILECODE (0xF10F) +#define PROC_MEM_MAIN_MMMEMCLR_FILECODE (0xF110) +#define PROC_MEM_MAIN_MMFLOW_FILECODE (0xF112) +#define PROC_MEM_MAIN_MERRHDL_FILECODE (0xF113) +#define PROC_MEM_MAIN_MMLVDDR3_FILECODE (0xF115) +#define PROC_MEM_MAIN_MMUMAALLOC_FILECODE (0xF116) +#define PROC_MEM_MAIN_MMMEMRESTORE_FILECODE (0xF117) +#define PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE (0xF118) +#define PROC_MEM_MAIN_MMAGGRESSOR_FILECODE (0xF119) +#define PROC_MEM_MAIN_TN_MMFLOWTN_FILECODE (0xF11C) +#define PROC_MEM_MAIN_KV_MMFLOWD3KV_FILECODE (0xF122) + +#define PROC_MEM_NB_MN_FILECODE (0XF27C) +#define PROC_MEM_NB_MNDCT_FILECODE (0XF27D) +#define PROC_MEM_NB_MNPHY_FILECODE (0XF27E) +#define PROC_MEM_NB_MNMCT_FILECODE (0XF27F) +#define PROC_MEM_NB_MNS3_FILECODE (0XF280) +#define PROC_MEM_NB_MNFLOW_FILECODE (0XF281) +#define PROC_MEM_NB_MNFEAT_FILECODE (0XF282) +#define PROC_MEM_NB_MNTRAIN3_FILECODE (0XF284) +#define PROC_MEM_NB_MNREG_FILECODE (0XF285) +#define PROC_MEM_NB_TN_MNREGTN_FILECODE (0XF29B) +#define PROC_MEM_NB_TN_MNTN_FILECODE (0XF29C) +#define PROC_MEM_NB_TN_MNMCTTN_FILECODE (0XF29D) +#define PROC_MEM_NB_TN_MNOTTN_FILECODE (0XF29E) +#define PROC_MEM_NB_TN_MNDCTTN_FILECODE (0XF29F) +#define PROC_MEM_NB_TN_MNPHYTN_FILECODE (0XF2A0) +#define PROC_MEM_NB_TN_MNS3TN_FILECODE (0XF2A1) +#define PROC_MEM_NB_TN_MNIDENDIMMTN_FILECODE (0XF2A2) +#define PROC_MEM_NB_TN_MNFLOWTN_FILECODE (0XF2A3) +#define PROC_MEM_NB_TN_MNPROTOTN_FILECODE (0XF2A4) +#define PROC_MEM_NB_KV_MNKV_FILECODE (0xF2AF) +#define PROC_MEM_NB_KV_MNMCTKV_FILECODE (0xF2B0) +#define PROC_MEM_NB_KV_MNDCTKV_FILECODE (0xF2B1) +#define PROC_MEM_NB_KV_MNPHYKV_FILECODE (0xF2B2) +#define PROC_MEM_NB_KV_MNS3KV_FILECODE (0xF2B3) +#define PROC_MEM_NB_KV_MNIDENDIMMKV_FILECODE (0xF2B4) +#define PROC_MEM_NB_KV_MNPROTOKV_FILECODE (0xF2B5) +#define PROC_MEM_NB_KV_MNREGKV_FILECODE (0xF2B6) +#define PROC_MEM_NB_MNPMU_FILECODE (0xF2B7) +#define PROC_MEM_NB_KV_MNPMUKV_FILECODE (0XF2C2) +#define PROC_MEM_NB_KV_MNPMUSRAMMSGBLOCKKV_FILECODE (0XF2D7) + +#define PROC_MEM_PS_MP_FILECODE (0XF401) +#define PROC_MEM_PS_MPRTT_FILECODE (0XF422) +#define PROC_MEM_PS_MPMAXFREQ_FILECODE (0XF423) +#define PROC_MEM_PS_MPODTPAT_FILECODE (0XF424) +#define PROC_MEM_PS_MPSAO_FILECODE (0XF425) +#define PROC_MEM_PS_MPMR0_FILECODE (0XF426) +#define PROC_MEM_PS_MPRC2IBT_FILECODE (0XF427) +#define PROC_MEM_PS_MPRC10OPSPD_FILECODE (0XF428) +#define PROC_MEM_PS_MPLRIBT_FILECODE (0XF429) +#define PROC_MEM_PS_MPLRNPR_FILECODE (0XF42A) +#define PROC_MEM_PS_MPLRNLR_FILECODE (0XF42B) +#define PROC_MEM_PS_TN_MPSTN3_FILECODE (0XF42D) +#define PROC_MEM_PS_TN_MPTN3_FILECODE (0XF42E) +#define PROC_MEM_PS_TN_MPUTN3_FILECODE (0XF42F) +#define PROC_MEM_PS_TN_FM2_MPUTNFM2_FILECODE (0XF430) +#define PROC_MEM_PS_TN_FP2_MPSTNFP2_FILECODE (0XF431) +#define PROC_MEM_PS_TN_FS1_MPSTNFS1_FILECODE (0XF432) +#define PROC_MEM_PS_MPS2D_FILECODE (0XF436) +#define PROC_MEM_PS_MPSEEDS_FILECODE (0XF437) +#define PROC_MEM_PS_MPCADCFG_FILECODE (0XF43C) +#define PROC_MEM_PS_MPDATACFG_FILECODE (0XF43D) +#define PROC_MEM_PS_KV_MPKV3_FILECODE (0XF43E) +#define PROC_MEM_PS_KV_MPSKV3_FILECODE (0XF43F) +#define PROC_MEM_PS_KV_MPUKV3_FILECODE (0XF440) + +#define PROC_MEM_TECH_MT_FILECODE (0XF501) +#define PROC_MEM_TECH_MTHDI_FILECODE (0XF502) +#define PROC_MEM_TECH_MTTDIMBT_FILECODE (0XF504) +#define PROC_MEM_TECH_MTTECC_FILECODE (0XF505) +#define PROC_MEM_TECH_MTTHRC_FILECODE (0XF506) +#define PROC_MEM_TECH_MTTML_FILECODE (0XF507) +#define PROC_MEM_TECH_MTTOPTSRC_FILECODE (0XF509) +#define PROC_MEM_TECH_MTTSRC_FILECODE (0XF50B) +#define PROC_MEM_TECH_MTTEDGEDETECT_FILECODE (0XF50C) +#define PROC_MEM_TECH_DDR3_MT3_FILECODE (0XF581) +#define PROC_MEM_TECH_DDR3_MTOT3_FILECODE (0XF583) +#define PROC_MEM_TECH_DDR3_MTRCI3_FILECODE (0XF584) +#define PROC_MEM_TECH_DDR3_MTSDI3_FILECODE (0XF585) +#define PROC_MEM_TECH_DDR3_MTSPD3_FILECODE (0XF586) +#define PROC_MEM_TECH_DDR3_MTTWL3_FILECODE (0XF587) +#define PROC_MEM_TECH_DDR3_MTTECC3_FILECODE (0XF588) +#define PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE (0XF589) +#define PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE (0XF58A) +#define PROC_MEM_TECH_MTTRDDQS2DTRAINING_FILECODE (0XF58B) +#define PROC_MEM_TECH_MTTRDDQS2DEYERIMSEARCH_FILECODE (0XF58C) +#define PROC_MEM_TECH_GDDR5_MNSPDG5_FILECODE (0XF58E) +#define PROC_MEM_TECH_GDDR5_MNDCTG5_FILECODE (0xF58F) + +#define PROC_RECOVERY_MEM_MRDEF_FILECODE (0XF801) +#define PROC_RECOVERY_MEM_MRINIT_FILECODE (0XF802) +#define PROC_RECOVERY_MEM_MRM_FILECODE (0XF803) +#define PROC_RECOVERY_MEM_MRUC_FILECODE (0XF804) +#define PROC_RECOVERY_MEM_TECH_MRTTPOS_FILECODE (0XF8C1) +#define PROC_RECOVERY_MEM_TECH_MRTTSRC_FILECODE (0XF8C2) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRT3_FILECODE (0XF8C3) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE (0XF8C4) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSDI3_FILECODE (0XF8C5) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSPD3_FILECODE (0XF8C6) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTTWL3_FILECODE (0XF8C7) +#define PROC_RECOVERY_MEM_NB_MRN_FILECODE (0XF8C8) +#define PROC_RECOVERY_MEM_NB_MRNDCT_FILECODE (0XF8C9) +#define PROC_RECOVERY_MEM_NB_MRNMCT_FILECODE (0XF8CA) +#define PROC_RECOVERY_MEM_NB_MRNTRAIN3_FILECODE (0XF8CB) +#define PROC_RECOVERY_MEM_TECH_MRTTHRC_FILECODE (0XF8CC) +#define PROC_RECOVERY_MEM_PS_MRP_FILECODE (0XF8E0) +#define PROC_RECOVERY_MEM_PS_MRPRTT_FILECODE (0XF8E1) +#define PROC_RECOVERY_MEM_PS_MRPODTPAT_FILECODE (0XF8E2) +#define PROC_RECOVERY_MEM_PS_MRPSAO_FILECODE (0XF8E3) +#define PROC_RECOVERY_MEM_PS_MRPMR0_FILECODE (0XF8E4) +#define PROC_RECOVERY_MEM_PS_MRPRC2IBT_FILECODE (0XF8E5) +#define PROC_RECOVERY_MEM_PS_MRPRC10OPSPD_FILECODE (0XF8E6) +#define PROC_RECOVERY_MEM_PS_MRPLRIBT_FILECODE (0XF8E7) +#define PROC_RECOVERY_MEM_PS_MRPLRNPR_FILECODE (0XF8E8) +#define PROC_RECOVERY_MEM_PS_MRPLRNLR_FILECODE (0XF8E9) +#define PROC_RECOVERY_MEM_NB_TN_MRNDCTTN_FILECODE (0XF8F3) +#define PROC_RECOVERY_MEM_NB_TN_MRNTN_FILECODE (0XF8F4) +#define PROC_RECOVERY_MEM_NB_TN_MRNMCTTN_FILECODE (0XF8F5) +#define PROC_RECOVERY_MEM_NB_TN_MRNPROTOTN_FILECODE (0XF8F6) +#define PROC_RECOVERY_MEM_PS_TN_MRPSTN3_FILECODE (0XF8F7) +#define PROC_RECOVERY_MEM_PS_TN_MRPTN3_FILECODE (0XF8F8) +#define PROC_RECOVERY_MEM_PS_TN_MRPUTN3_FILECODE (0XF8F9) +#define PROC_RECOVERY_MEM_TECH_MRTTHRCSEEDTRAIN_FILECODE (0XF8FA) + +//Psp +#define UEFI_PSP_DRIVERS_ITPMDXE_ITPMDXE_FILECODE (0xFA00) +#define UEFI_PSP_DRIVERS_ITPMPEI_ITPMPEI_FILECODE (0xFA01) +#define UEFI_PSP_DRIVERS_ITPMSMM_ITPMPSPCOMMAND_FILECODE (0xFA02) +#define UEFI_PSP_DRIVERS_ITPMSMM_ITPMSMM_FILECODE (0xFA03) +#define UEFI_PSP_DRIVERS_PSPPEI_PSPPEI_FILECODE (0xFA04) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPRESUMEHANDLING_FILECODE (0xFA05) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPRESUMESERVICES_FILECODE (0xFA06) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPSMM_FILECODE (0xFA07) +#define UEFI_PSP_LIBRARY_PSPBASELIB_PSPBASELIB_FILECODE (0xFA08) +#define UEFI_PSP_LIBRARY_PSPMBOX_PSPMBOX_FILECODE (0xFA09) +#define UEFI_PSP_LIBRARY_SMMLOAD_SMMLOAD_FILECODE (0xFA0A) +#define UEFI_PSP_DRIVERS_PSPDXE_PSPDXE_FILECODE (0xFA0B) +#define UEFI_PSP_LIBRARY_PSPFTPMLIB_PSPFTPMLIB_FILECODE (0xFA0C) +#define UEFI_PSP_LIBRARY_CCPSHALIB_CCPSHALIB_FILECODE (0xFA0D) + +#endif // _FILECODE_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Include/Ids.h b/src/vendorcode/amd/pi/00630F01/Include/Ids.h new file mode 100644 index 0000000000..a0bc8ed38d --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/Ids.h @@ -0,0 +1,1428 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA Integrated Debug Macros + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright 2008 - 2014 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + /* Macros to aid debugging */ + /* These definitions expand to zero (0) bytes of code when disabled */ + +#ifndef _IDS_H_ +#define _IDS_H_ + +#undef FALSE +#undef TRUE +#define FALSE 0 +#define TRUE 1 +// Proto type for optionsids.h +typedef UINT32 IDS_STATUS; ///< Status of IDS function. +#define IDS_SUCCESS ((IDS_STATUS) 0x00000000ul) ///< IDS Function is Successful. +#define IDS_UNSUPPORTED ((IDS_STATUS) 0xFFFFFFFFul) ///< IDS Function is not existed. + +#define IDS_STRINGIZE(a) #a ///< for define stringize macro +#ifndef IDS_DEADLOOP + #define IDS_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif +/** + * IDS Option Hook Points + * + * These are the values to indicate hook point in AGESA for IDS Options. + * + */ +typedef enum { //vv- for debug reference only + IDS_INIT_EARLY_BEFORE, ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY. + ///< IDS Object is initialized. + ///< Override CPU Core Leveling Mode. + ///< Set P-State in Post + IDS_INIT_EARLY_AFTER, ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY. + IDS_INIT_LATE_BEFORE, ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE. + ///< It will be used to control the following tables. + ///< ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC) + ///< ACPI SRAT Table + ///< ACPI SLIT Table + ///< ACPI WHEA Table + ///< DMI Table + IDS_INIT_LATE_AFTER, ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE. + IDS_INIT_MID_BEFORE, ///< 04 Option Hook Point before AGESA function AMD_INIT_MID. + IDS_INIT_MID_AFTER, ///< 05 Option Hook Point after AGESA function AMD_INIT_MID. + IDS_INIT_POST_BEFORE, ///< 06 Option Hook Point before AGESA function AMD_INIT_POST. + ///< Control Interleaving and DRAM memory hole + ///< Override the setting of ECC Control + ///< Override the setting of Online Spare Rank + IDS_INIT_POST_AFTER, ///< 07 Option Hook Point after AGESA function AMD_INIT_POST. + IDS_INIT_RESET_BEFORE, ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET. + IDS_INIT_RESET_AFTER, ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET. + IDS_INIT_POST_MID, ///< 0a Option Hook Point after AGESA function AMD_INIT_POST. + IDS_BEFORE_S3_SAVE, ///< 0b override any settings before S3 save. + IDS_BEFORE_S3_RESTORE, ///< 0c override any settings before S3 restore + IDS_AFTER_S3_SAVE, ///< 0d Override any settings after S3 save + IDS_AFTER_S3_RESTORE, ///< 0e Override any settings after S3 restore + IDS_BEFORE_DQS_TRAINING, ///< 0f override any settings before DQS training + IDS_BEFORE_DRAM_INIT, ///< 10 override any settings before Dram initialization + IDS_BEFORE_MEM_FREQ_CHG, ///< 11 override settings before MemClk frequency change + IDS_BEFORE_WARM_RESET , ///< 12 Override PCI or MSR Registers Before Warm Reset + IDS_BEFORE_PCI_INIT, ///< 13 Override PCI or MSR Registers Before PCI Init + IDS_BEFORE_AP_EARLY_HALT, ///< 14 Option Hook Point before AP early halt + IDS_BEFORE_S3_RESUME, ///< 15 Option Hook Point before s3 resume + IDS_AFTER_S3_RESUME, ///< 16 Option Hook Point after s3 resume + IDS_BEFORE_PM_INIT, ///< 17 Option Hook Point Before Pm Init + + IDS_MT_BASE = 0x20, ///< 0x20 ~ 0x38 24 time points reserved for MTTime + + IDS_PLATFORM_RSVD1 = 0x38, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD2 = 0x39, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD3 = 0x3a, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD4 = 0x3b, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD5 = 0x3c, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD6 = 0x3d, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD7 = 0x3e, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD8 = 0x3f, ///< from 0x38 to 0x3f will reserved for platform used + + // All the above timing point is used by BVM, their value should never be changed + IDS_INIT_DRAM_TABLE, ///< 40 Generate override table for Dram Timing + ///< Dram Controller, Drive Strength and DQS Timing + IDS_GET_DRAM_TABLE, ///< 41 Generate override table for Dram Timing + IDS_GANGING_MODE, ///< 42 override Memory Mode Unganged + IDS_POWERDOWN_MODE, ///< 43 override Power Down Mode + IDS_BURST_LENGTH32, ///< 44 override Burst Length32 + IDS_ALL_MEMORY_CLOCK, ///< 45 override All Memory Clks Enable + IDS_ECC, ///< 46 override ECC parameter + IDS_ECCSYMBOLSIZE, ///< 47 override ECC symbol size + IDS_CPU_Early_Override, ///< 48 override CPU early parameter + IDS_CACHE_FLUSH_HLT, ///< 49 override Cache Flush Hlt + IDS_CHANNEL_INTERLEAVE, ///< 4a override Channel Interleave + IDS_MEM_ERROR_RECOVERY, ///< 4b override memory error recovery + IDS_MEM_RETRAIN_TIMES, ///< 4c override memory retrain times + IDS_MEM_SIZE_OVERLAY, ///< 4d Override the syslimit + IDS_CHECK_NEGATIVE_WL, ///< 4e Check for negative write leveling result + IDS_DLL_SHUT_DOWN, ///< 4f Check for Dll Shut Down + IDS_POR_MEM_FREQ, ///< 50 Entry to enable/disable MemClk frequency enforcement + IDS_PHY_DLL_STANDBY_CTRL, ///< 51 Enable/Disable Phy DLL standby feature + IDS_PLATFORMCFG_OVERRIDE, ///< 52 Hook for Override PlatformConfig structure + IDS_LOADCARD_ERROR_RECOVERY, ///< 53 Special error handling for load card support + IDS_MEM_IGNORE_ERROR, ///< 54 Ignore error and do not do fatal exit in memory + IDS_GNB_SMU_SERVICE_CONFIG, ///< 55 Config GNB SMU service + IDS_GNB_ORBDYNAMIC_WAKE, ///< 56 config GNB dynamic wake + IDS_GNB_PLATFORMCFG_OVERRIDE, ///< 57 override ids gnb platform config + IDS_GNB_LCLK_DPM_EN, ///< 58 override GNB LCLK DPM configuration + IDS_GNB_LCLK_DEEP_SLEEP, ///< 59 override GNB LCLK DPM deep sleep + IDS_GNB_CLOCK_GATING, ///< 5a Override GNB Clock gating config + IDS_NB_PSTATE_DIDVID, ///< 5b Override NB P-state settings + IDS_CPB_CTRL, ///< 5c Config the Core peformance boost feature + IDS_HTC_CTRL, ///< 5d Hook for Hardware Thermal Control + IDS_CC6_WORKAROUND, ///< 5e Hook for skip CC6 work around + IDS_MEM_MR0, ///< 5f Hook for override Memory Mr0 register + IDS_TRAP_TABLE, ///< 60 Hook for add IDS register table to the loop + IDS_NBBUFFERALLOCATIONATEARLY, ///< 61 Hook for override North bridge bufer allocation + IDS_BEFORE_S3_SPECIAL, ///< 62 Hook to bypass S3 special functions + IDS_SET_PCI_REGISTER_ENTRY, ///< 63 Hook to SetRegisterForPciEntry + IDS_ERRATUM463_WORKAROUND, ///< 64 Hook to Erratum 463 workaround + IDS_BEFORE_MEMCLR, ///< 65 Hook before set Memclr bit + IDS_OVERRIDE_IO_CSTATE, ///< 66 Hook for override io C-state setting + IDS_NBPSDIS_OVERRIDE, ///< 67 Hook for override NB pstate disable setting + IDS_NBPS_REG_OVERRIDE, ///< 68 Hook for override Memory NBps reg + IDS_LOW_POWER_PSTATE, ///< 69 Hook for disable Low power_Pstates feature + IDS_CST_CREATE, ///< 6a Hook for create _CST + IDS_CST_SIZE, ///< 6b Hook for get _CST size + IDS_ENFORCE_VDDIO, ///< 6c Hook to override VDDIO + IDS_STRETCH_FREQUENCY_LIMIT, ///< 6d Hook for enforcing memory stretch frequency limit + IDS_INIT_MEM_REG_TABLE, ///< 6e Hook for init memory register table + IDS_SKIP_FUSED_MAX_RATE, ///< 6f Hook to skip fused max rate cap + IDS_FCH_INIT_AT_RESET, ///< 70 Hook for FCH reset parameter + IDS_FCH_INIT_AT_ENV, ///< 71 Hook for FCH ENV parameter + IDS_ENFORCE_PLAT_TABLES, ///< 72 Hook to enforce platform specific tables + IDS_NBPS_MIN_FREQ, ///< 73 Hook for override MIN nb ps freq + IDS_GNB_FORCE_CABLESAFE, ///< 74 Hook for override Force Cable Safe + IDS_SKIP_PM_TRANSITION_STEP, ///< 75 Hook for provide IDS ability to skip this PM step + IDS_GNB_PROPERTY, ///< 76 Hook for GNB Property + IDS_GNB_PCIE_POWER_GATING, ///< 77 Hook for GNB PCIe Power Gating + IDS_MEM_DYN_DRAM_TERM, ///< 78 Hook for Override Dynamic Dram Term + IDS_MEM_DRAM_TERM, ///< 79 Hook for Override Dram Term + IDS_GNB_ALTVDDNB, ///< 7a Hook for Override AltVddNB + IDS_UCODE, ///< 7b Enable or Disable microcode patching + IDS_FAM_REG_GMMX, ///< 7c GMMX register access + IDS_MEMORY_POWER_POLICY, ///< 7d Memory power policy + IDS_GET_STRETCH_FREQUENCY_LIMIT, ///< 7e Hook for enforcing memory stretch frequency limit + IDS_CPU_FEAT, ///< 7f Hook for runtime force cpu feature disable + IDS_AFTER_DCT_PHY_ACCESS, ///< 80 Hook for DctAccessDone check + IDS_FORCE_PHY_TO_M0, ///< 81 Hook to bypass M0 enforcement + IDS_GNB_PMM_SWTJOFFSET, ///< 82 Hook to GNBSWTJOFFSET + IDS_LOCK_DRAM_CFG, ///< 83 Hook to BFLockDramCfg + IDS_BEFORE_GEN2_INIT, ///< 84 Hook to Before Gen2 Init + IDS_BEFORE_GPP_TRAINING, ///< 85 Hook to Before Gpp training + IDS_BEFORE_RECONFIGURATION, ///< 86 Hook to Before Reconfiguration + IDS_BEFORE_GEN3_INIT, ///< 87 Hook to Before Gen3 Init + IDS_BEFORE_POWER_GATING, ///< 88 Hook to Before Power Gating + IDS_AFTER_EARLY_INIT_ONCORE, ///< 89 Hook to after EarlyInit On Core + IDS_GNB_PCIE_PORT_REMAP, ///< 8a Hook to change mapping of PCIe devices + IDS_ECC_CONTROL, ///< 8b Enable/Disable ECC feature + IDS_GNB_PCIE_PHY_ISOLATION, ///< 8c Enable/Disable PCIE PHY ISOLATION + IDS_AFTER_RESTORING_PCI_REG, ///< 8d Hook after restoring PCI register during S3 resume + IDS_MSR_ACCESS_OVERRIDE, ///< 8e Hook to disable MSR access + IDS_REPORT_SMU_FW_VERSION, ///< 8f Hook to report SMU firmware version + IDS_GNB_LOAD_SAMU_PATCH, ///< 90 Hook to Load SAMU patch + IDS_DLLSTAGGERDLY_OVERRIDE, ///< 91 Hook to skip Dll Stagger Delay + IDS_CSAMPLE_TIMER, ///< 92 Hook to override CSampleTimer + IDS_PIPE_THROTTLE, ///< 93 Hook to override PipeThrottle + IDS_GNB_PMM_NATIVEGEN1PLL, ///< 94 Enable/Disable Native Gen1 PLL + IDS_BEFORE_PLAT_TABLES, ///< 95 Hook before processing platform specific tables + IDS_GNB_PCIE_MASTERPLL_SELECTION, ///< 96 Hook to override PCIe Master PLL selection + IDS_GNB_PCIE_PHYLANE_CONFIG, ///< 97 Hook to override PCIe PhyLane configuration + IDS_DSM_LP_SELECTION, ///< 98 Set Dsm low power mode + IDS_GNB_EQUAL_PRESET, ///< 99 Set equalization preset + IDS_GNB_GEN1_LOOPBACK, ///< 9a Override Gen 1 loopback mode + IDS_GNB_SMU_SERVICE_MASK, ///< 9b Override SMU service enablement mask + IDS_BEFORE_HT_MEM_MAP, ///< 9c Hook before mapping memory address space among DCTs + IDS_GNB_GEN3_SETTINGS_OVERRIDE, ///< 9d Hook to override Gen3 Adapt PI Offset Bypass Enable + IDS_GNB_TARGET_TDP, ///< 9e Hook to override Target TDP + IDS_GNB_LOAD_BUILD_OPTIONS, ///< 9f Hook to override gnb build options + IDS_GNB_SMU_BIOS_TABLE, ///< A0 Hook to override gnb smu bios table + IDS_OPTION_END ///< A1 End of IDS option +} AGESA_IDS_OPTION; + +#include "OptionsIds.h" +#include "Filecode.h" +#include "IdsPerf.h" + +/* Initialize IDS controls */ +#ifndef IDSOPT_IDS_ENABLED + #define IDSOPT_IDS_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_ENABLED + #define IDSOPT_CONTROL_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_NV_TO_CMOS + #define IDSOPT_CONTROL_NV_TO_CMOS FALSE +#endif + +#ifndef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE +#endif + +#ifndef IDSOPT_TRACE_USER_OPTIONS + #define IDSOPT_TRACE_USER_OPTIONS TRUE +#endif + +#ifndef IDSOPT_PERF_ANALYSIS + #define IDSOPT_PERF_ANALYSIS FALSE +#endif + +#ifndef IDSOPT_HEAP_CHECKING + #define IDSOPT_HEAP_CHECKING FALSE +#endif + +#ifndef IDSOPT_ASSERT_ENABLED + #define IDSOPT_ASSERT_ENABLED FALSE +#endif + +#ifndef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED FALSE +#endif + +#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE +#endif + +#ifndef IDSOPT_DEBUG_CODE_ENABLED + #define IDSOPT_DEBUG_CODE_ENABLED FALSE +#endif + +#ifndef IDSOPT_IDT_EXCEPTION_TRAP + #define IDSOPT_IDT_EXCEPTION_TRAP FALSE +#endif + +#ifndef IDSOPT_C_OPTIMIZATION_DISABLED + #define IDSOPT_C_OPTIMIZATION_DISABLED FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT TRUE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IDSOPT_CONTROL_ENABLED + #undef IDSOPT_TRACING_ENABLED + #undef IDSOPT_PERF_ANALYSIS + #undef IDSOPT_HEAP_CHECKING + #undef IDSOPT_ASSERT_ENABLED + #undef IDSOPT_ERROR_TRAP_ENABLED + #undef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #undef IDSOPT_DEBUG_CODE_ENABLED + #undef IDSOPT_TRACE_USER_OPTIONS + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #undef IDSOPT_TRACING_CONSOLE_RAM + + #define IDSOPT_CONTROL_ENABLED FALSE + #define IDSOPT_TRACING_ENABLED FALSE + #define IDSOPT_PERF_ANALYSIS FALSE + #define IDSOPT_HEAP_CHECKING FALSE + #define IDSOPT_ASSERT_ENABLED FALSE + #define IDSOPT_ERROR_TRAP_ENABLED FALSE + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE + #define IDSOPT_DEBUG_CODE_ENABLED FALSE + #define IDSOPT_TRACE_USER_OPTIONS FALSE + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable when master token Tracing is set to FALSE +#if (IDSOPT_TRACING_ENABLED == FALSE) || (defined (IDSOPT_CUSTOMIZE_TRACING_SERVICE)) + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + + #undef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable Tracing if all support HW layer set to FALSE +#if ((IDSOPT_TRACING_CONSOLE_HDTOUT == FALSE) && (IDSOPT_TRACING_CONSOLE_SERIALPORT == FALSE) && (IDSOPT_TRACING_CONSOLE_REDIRECT_IO == FALSE) && (IDSOPT_TRACING_CONSOLE_RAM == FALSE)) + #ifndef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE + #endif +#endif +/** + * Make a Progress Report to the User. + * + * This Macro is always enabled. The default action is to write the TestPoint value + * to an I/O port. The I/O port is 8 bits in size and the default address is 0x80. + * IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port + * in OptionsIds.h in their build tip. + * + * @param[in] TestPoint The value for display indicating progress + * @param[in,out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + **/ + +#define AGESA_TESTPOINT(TestPoint, StdHeader) IdsAgesaTestPoint ((TestPoint), (StdHeader)) + +#ifndef IDS_DEBUG_PORT + #define IDS_DEBUG_PORT 0x80 +#endif + +/** + * @def STOP_HERE + * (macro) - Causes program to halt. This is @b only for use during active debugging . + * + * Causes the program to halt and display the file number of the source of the + * halt (displayed in decimal). + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + #define STOP_HERE IdsErrorStop (STOP_CODE); +#else + #define STOP_HERE STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds." +#endif + +/** + * @def ASSERT + * Test an assertion that the given statement is True. + * + * The statement is evaluated to a boolean value. If the statement is True, + * then no action is taken (no error). If the statement is False, a error stop + * is generated to halt the program. Used for testing for fatal errors that + * must be resolved before production. This is used to do parameter checks, + * bounds checking, range checks and 'sanity' checks. + * + * @param[in] conditional Assert that evaluating this conditional results in TRUE. + * + **/ +#ifndef ASSERT + #if IDSOPT_ASSERT_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE)); + #else + #define ASSERT(conditional) + #endif +#endif + +#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE + #undef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED TRUE + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) IdsCarCorruptionCheck(StdHeader) +#else + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) +#endif +/** + * @def DEBUG_CODE + * Make the code active when IDSOPT_DEBUG_CODE_ENABLED enable + * + */ +#ifndef DEBUG_CODE + #if IDSOPT_DEBUG_CODE_ENABLED == TRUE + #define DEBUG_CODE(Code) Code + #else + #define DEBUG_CODE(Code) + #endif +#endif + +/** + * @def IDS_ERROR_TRAP + * Trap AGESA Error events with stop code display. + * + * Works similarly to use of "ASSERT (FALSE);" + * + */ +#if IDSOPT_ERROR_TRAP_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_ERROR_TRAP IdsErrorStop (STOP_CODE) +#else + #define IDS_ERROR_TRAP +#endif + +///give the extended Macro default value +#ifndef __IDS_EXTENDED__ + #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS + #define IDS_TRACE_DEFAULT (0) + #define IDS_INITIAL_F15_TN_PM_STEP + #define IDS_INITIAL_F15_KV_PM_STEP + #define IDS_F15_TN_PM_CUSTOM_STEP + #define IDS_F15_KV_PM_CUSTOM_STEP + #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader) + #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader) + #define IDS_EXTENDED_HEAP_SIZE 0 + #define IDS_EXT_INCLUDE_F15(file) + #define IDS_EXT_INCLUDE(file) + #define IDS_PAD_4K + #define IDS_EXTENDED_CODE(code) + #define SMU_FIRMWARE_PADS_1K +#endif + +#ifndef IDS_NUM_NV_ITEM + #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM) +#endif + +#define IDS_CMOS_INDEX_PORT 0x70 +#define IDS_CMOS_DATA_PORT 0x71 +#define IDS_CMOS_REGION_START 0x20 +#define IDS_CMOS_REGION_END 0x7F +#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) \ + AmdIdsCtrlDispatcher ((IdsOption), (DataPtr), (StdHeader)) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) \ + IdsOptionCallout ((CallOutId), (DataPtr), (StdHeader)) + #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE + #undef IDS_AP_GET_NV_FROM_CMOS + #define IDS_AP_GET_NV_FROM_CMOS(x) AmdIdsApGetNvFromCmos(x) + #ifdef IDS_OPT_CMOS_INDEX_PORT + #undef IDS_CMOS_INDEX_PORT + #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT + #endif + + #ifdef IDS_OPT_CMOS_DATA_PORT + #undef IDS_CMOS_DATA_PORT + #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT + #endif + + #ifdef IDS_OPT_CMOS_REGION_START + #undef IDS_CMOS_REGION_START + #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START + #endif + + #ifdef IDS_OPT_CMOS_REGION_END + #undef IDS_CMOS_REGION_END + #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END + #endif + #endif +#else + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) AGESA_SUCCESS +#endif + +/** + * Macro to add a *skip* hook for IDS options + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, IDS dispatcher function will be called to perform + * the detailed action and to skip AGESA code if necessary. + * + * @param[in] IdsOption IDS Option ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) \ + if (AmdIdsCtrlDispatcher (IdsOption, DataPtr, StdHeader) == IDS_SUCCESS) +#else + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) +#endif + +/** + * Macro to add a heap manager routine + * + * when memory is allocated the heap manager actually allocates two extra dwords of data, + * one dword buffer before the actual memory, and one dword afterwards. + * a complete heap walk and check to be performed at any time. + * it would ASSERT if the heap is corrupt + * + * @param[in] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +// Heap debug feature +#define SENTINEL_BEFORE_VALUE 0x64616548ul // "Head" +#define SENTINEL_AFTER_VALUE 0x6C696154ul // "Tail" +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_HEAP_CHECKING == TRUE + #define SIZE_OF_SENTINEL 4 + #define NUM_OF_SENTINEL 2 // Before ("Head") and After ("Tail") + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE); + #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE); + #define Heap_Check(stdheader) AmdHeapIntactCheck(stdheader) + #else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) + #endif +#else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) +#endif + +/** + * Macro to add IDT for debugging exception. + * + * A debug feature. Adding a 'jmp $' into every exception handler. + * So debugger could use HDT to skip 'jmp $' and execute the iret, + * then they could find which instruction cause the exception. + * + * @param[in] FunctionId IDS Function ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) IdsExceptionTrap (FunctionId, DataPtr, StdHeader) + #else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) + #endif +#else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) +#endif + + + //Note a is from 0 to 63 +#define DEBUG_PRINT_SHIFT(a) ((UINT64)1 << a) +//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly +//Memory Masks +#define MEM_SETREG DEBUG_PRINT_SHIFT (0) +#define MEM_GETREG DEBUG_PRINT_SHIFT (1) +#define MEM_FLOW DEBUG_PRINT_SHIFT (2) +#define MEM_STATUS DEBUG_PRINT_SHIFT (3) +#define MEM_UNDEF_BF DEBUG_PRINT_SHIFT (4) +#define MEMORY_TRACE_RSV2 DEBUG_PRINT_SHIFT (5) +#define MEMORY_TRACE_RSV3 DEBUG_PRINT_SHIFT (6) +#define MEMORY_TRACE_RSV4 DEBUG_PRINT_SHIFT (7) +#define MEMORY_TRACE_RSV5 DEBUG_PRINT_SHIFT (8) +#define MEMORY_TRACE_RSV6 DEBUG_PRINT_SHIFT (9) + +//CPU Masks +#define CPU_TRACE DEBUG_PRINT_SHIFT (10) +#define CPU_TRACE_RSV1 DEBUG_PRINT_SHIFT (11) +#define CPU_TRACE_RSV2 DEBUG_PRINT_SHIFT (12) +#define CPU_TRACE_RSV3 DEBUG_PRINT_SHIFT (13) +#define CPU_TRACE_RSV4 DEBUG_PRINT_SHIFT (14) +#define CPU_TRACE_RSV5 DEBUG_PRINT_SHIFT (15) +#define CPU_TRACE_RSV6 DEBUG_PRINT_SHIFT (16) +#define CPU_TRACE_RSV7 DEBUG_PRINT_SHIFT (17) +#define CPU_TRACE_RSV8 DEBUG_PRINT_SHIFT (18) +#define CPU_TRACE_RSV9 DEBUG_PRINT_SHIFT (19) + +//GNB Masks +#define GNB_TRACE DEBUG_PRINT_SHIFT (20) +#define PCIE_MISC DEBUG_PRINT_SHIFT (21) +#define PCIE_PORTREG_TRACE DEBUG_PRINT_SHIFT (22) +#define PCIE_HOSTREG_TRACE DEBUG_PRINT_SHIFT (23) +#define GNB_TRACE_RSV2 DEBUG_PRINT_SHIFT (24) +#define NB_MISC DEBUG_PRINT_SHIFT (25) +#define GNB_TRACE_RSV3 DEBUG_PRINT_SHIFT (26) +#define GFX_MISC DEBUG_PRINT_SHIFT (27) +#define NB_SMUREG_TRACE DEBUG_PRINT_SHIFT (28) +#define GNB_TRACE_RSV1 DEBUG_PRINT_SHIFT (29) + +//Topology Masks +#define TOPO_TRACE DEBUG_PRINT_SHIFT (30) +#define TOPO_TRACE_RSV1 DEBUG_PRINT_SHIFT (31) +#define TOPO_TRACE_RSV2 DEBUG_PRINT_SHIFT (32) +#define TOPO_TRACE_RSV3 DEBUG_PRINT_SHIFT (33) +#define TOPO_TRACE_RSV4 DEBUG_PRINT_SHIFT (34) +#define TOPO_TRACE_RSV5 DEBUG_PRINT_SHIFT (35) +#define TOPO_TRACE_RSV6 DEBUG_PRINT_SHIFT (36) +#define TOPO_TRACE_RSV7 DEBUG_PRINT_SHIFT (37) +#define TOPO_TRACE_RSV8 DEBUG_PRINT_SHIFT (38) +#define TOPO_TRACE_RSV9 DEBUG_PRINT_SHIFT (39) + +//FCH Masks +#define FCH_TRACE DEBUG_PRINT_SHIFT (40) +#define FCH_TRACE_RSV1 DEBUG_PRINT_SHIFT (41) +#define FCH_TRACE_RSV2 DEBUG_PRINT_SHIFT (42) +#define FCH_TRACE_RSV3 DEBUG_PRINT_SHIFT (43) +#define FCH_TRACE_RSV4 DEBUG_PRINT_SHIFT (44) +#define FCH_TRACE_RSV5 DEBUG_PRINT_SHIFT (45) +#define FCH_TRACE_RSV6 DEBUG_PRINT_SHIFT (46) +#define FCH_TRACE_RSV7 DEBUG_PRINT_SHIFT (47) +#define FCH_TRACE_RSV8 DEBUG_PRINT_SHIFT (48) +#define FCH_TRACE_RSV9 DEBUG_PRINT_SHIFT (49) + +//Other Masks +#define MAIN_FLOW DEBUG_PRINT_SHIFT (50) +#define EVENT_LOG DEBUG_PRINT_SHIFT (51) +#define PERFORMANCE_ANALYSE DEBUG_PRINT_SHIFT (52) + +//Ids Masks +#define IDS_TRACE DEBUG_PRINT_SHIFT (53) +#define BVM_TRACE DEBUG_PRINT_SHIFT (54) +#define IDS_TRACE_RSV2 DEBUG_PRINT_SHIFT (55) +#define IDS_TRACE_RSV3 DEBUG_PRINT_SHIFT (56) + +//S3 +#define S3_TRACE DEBUG_PRINT_SHIFT (57) + +//Library function to read/write PCI/MSR registers +#define LIB_PCI_RD DEBUG_PRINT_SHIFT (58) +#define LIB_PCI_WR DEBUG_PRINT_SHIFT (59) + +//AGESA test points +#define TEST_POINT DEBUG_PRINT_SHIFT (60) + +//Reserved for platform log +#define PLAT_RSV1 DEBUG_PRINT_SHIFT (61) +#define PLAT_RSV2 DEBUG_PRINT_SHIFT (62) +#define PLAT_RSV3 DEBUG_PRINT_SHIFT (63) + +#define GNB_TRACE_DEFAULT\ + (\ + GNB_TRACE | PCIE_MISC | NB_MISC | GFX_MISC \ + ) + +#define GNB_TRACE_REG\ + (\ + PCIE_PORTREG_TRACE | PCIE_HOSTREG_TRACE | \ + NB_SMUREG_TRACE | GNB_TRACE_RSV1 \ + ) + +#define GNB_TRACE_ALL\ + (\ + GNB_TRACE_DEFAULT | GNB_TRACE_REG \ + ) + +#define CPU_TRACE_ALL\ + (\ + CPU_TRACE | CPU_TRACE_RSV1 | CPU_TRACE_RSV2 | CPU_TRACE_RSV3 | \ + CPU_TRACE_RSV4 | CPU_TRACE_RSV5 | CPU_TRACE_RSV6 | CPU_TRACE_RSV7 | \ + CPU_TRACE_RSV8 | CPU_TRACE_RSV9\ + ) + +#define MEMORY_TRACE_ALL\ + (\ + MEM_FLOW | MEM_GETREG | MEM_SETREG | MEM_STATUS | \ + MEMORY_TRACE_RSV1 | MEMORY_TRACE_RSV2 | MEMORY_TRACE_RSV3 | MEMORY_TRACE_RSV4 | \ + MEMORY_TRACE_RSV5 | MEMORY_TRACE_RSV6\ + ) + +#define TOPO_TRACE_ALL\ + (\ + TOPO_TRACE | TOPO_TRACE_RSV1 | TOPO_TRACE_RSV2 | TOPO_TRACE_RSV3 | \ + TOPO_TRACE_RSV4 | TOPO_TRACE_RSV5 | TOPO_TRACE_RSV6 | TOPO_TRACE_RSV7 | \ + TOPO_TRACE_RSV8 | TOPO_TRACE_RSV9\ + ) + +#define FCH_TRACE_ALL\ + (\ + FCH_TRACE | FCH_TRACE_RSV1 | FCH_TRACE_RSV2 | FCH_TRACE_RSV3 | \ + FCH_TRACE_RSV4 | FCH_TRACE_RSV5 | FCH_TRACE_RSV6 | FCH_TRACE_RSV7 | \ + FCH_TRACE_RSV8 | FCH_TRACE_RSV9\ + ) + +#define IDS_TRACE_ALL\ + (\ + IDS_TRACE | BVM_TRACE | IDS_TRACE_RSV2 | IDS_TRACE_RSV3\ + ) + +#define OTHER_TRACE_ALL\ + (\ + MAIN_FLOW | EVENT_LOG | PERFORMANCE_ANALYSE\ + ) + + +#define TRACE_MASK_ALL (0xFFFFFFFFFFFFFFFFull) +#ifndef IDS_DEBUG_PRINT_MASK + #define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT | CPU_TRACE_ALL | MEM_FLOW | MEM_STATUS | TOPO_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT) +#endif + +/// if no specific define INIT & EXIT will be NULL +#define IDS_HDT_CONSOLE_INIT(x) +#define IDS_HDT_CONSOLE_EXIT(x) + +/// AGESA tracing service +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef VA_ARGS_SUPPORTED + #if IDSOPT_C_OPTIMIZATION_DISABLED == TRUE + #define IDS_HDT_CONSOLE(f, s, ...) AmdIdsDebugPrint (f, s, __VA_ARGS__) + #else + #pragma warning(disable: 4127) + #define IDS_HDT_CONSOLE(f, s, ...) if (f == MEM_FLOW) AmdIdsDebugPrintMem (s, __VA_ARGS__); \ + else if (f == CPU_TRACE) AmdIdsDebugPrintCpu (s, __VA_ARGS__); \ + else if (f == TOPO_TRACE) AmdIdsDebugPrintTopology (s, __VA_ARGS__); \ + else if (f == GNB_TRACE) AmdIdsDebugPrintGnb (s, __VA_ARGS__); \ + else AmdIdsDebugPrint (f, s, __VA_ARGS__) + #endif + #else + #define IDS_HDT_CONSOLE AmdIdsDebugPrint + #endif + #define CONSOLE AmdIdsDebugPrintAll + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) Code + #define IDS_TIMEOUT_CTL(t) IdsMemTimeOut (t) +#else + #define IDS_HDT_CONSOLE 1 ? (VOID) 0 : AmdIdsDebugPrint + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) + #define CONSOLE CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds." + #define IDS_TIMEOUT_CTL(t) +#endif + +/// Macros for serial port tracing +#ifdef IDSOPT_SERIAL_PORT + #define IDS_SERIAL_PORT IDSOPT_SERIAL_PORT +#endif + +#ifndef IDS_SERIAL_PORT + #define IDS_SERIAL_PORT 0x3F8 +#endif + +// Macros for redirect IO tracing +#ifdef IDSOPT_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT IDSOPT_DEBUG_PRINT_IO_PORT +#endif + +#ifndef IDS_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT 0x80 +#endif + +#define IDS_DPRAM_BASE 0 +#define IDS_DPRAM_SIZE 0 +///Default policy, shift the old data when buffer full +#define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL FALSE +#if IDSOPT_TRACING_CONSOLE_RAM == TRUE + #ifdef IDSOPT_DPRAM_BASE + #undef IDS_DPRAM_BASE + #define IDS_DPRAM_BASE IDSOPT_DPRAM_BASE + #else + #error "Debug Print Ram Base not specified, please define IDSOPT_DPRAM_BASE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_SIZE + #undef IDS_DPRAM_SIZE + #define IDS_DPRAM_SIZE IDSOPT_DPRAM_SIZE + #else + #error "Debug Print Ram size not specified, please define IDSOPT_DPRAM_SIZE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #endif +#endif +/** + * Macros to add HDT OUT + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, the debug information can be displayed in HDT or other + * devices. + * + **/ +#if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE + #undef IDS_HDT_CONSOLE_INIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_INIT(x) AmdIdsHdtOutInit (x) + #define IDS_HDT_CONSOLE_EXIT(x) AmdIdsHdtOutExit (x) + #define IDS_HDT_CONSOLE_S3_EXIT(x) AmdIdsHdtOutS3Exit (x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) AmdIdsHdtOutS3ApExit (x) + + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) AmdIdsHdtOutBufferFlush (x) + #define IDS_HDT_CONSOLE_ASSERT(x) AmdIdsDebugPrintAssert (x) + #define IDS_FUNCLIST_ADDR ScriptFuncList + #define IDS_FUNCLIST_EXTERN() extern SCRIPT_FUNCTION ScriptFuncList[] +#else + #define IDS_HDT_CONSOLE_S3_EXIT(x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) + #define IDS_HDT_CONSOLE_ASSERT(x) + #define IDS_FUNCLIST_ADDR NULL + #define IDS_FUNCLIST_EXTERN() +#endif + +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDS_HDT_CONSOLE + #define IDS_HDT_CONSOLE IDSOPT_CUSTOMIZE_TRACING_SERVICE + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT + #undef IDS_HDT_CONSOLE_INIT + #define IDS_HDT_CONSOLE_INIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT (x) + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_EXIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT (x) + #endif +#endif + +#define IDS_TRACE_SHOW_BLD_OPT_CFG IDSOPT_TRACE_USER_OPTIONS + +#if IDSOPT_PERF_ANALYSIS == TRUE + #include "IdsPerf.h" + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_PERF_TIMESTAMP(ID, StdHeader) IdsPerfTimestamp (STOP_CODE, ID, (StdHeader)) + #define IDS_PERF_ANALYSE(StdHeader) IdsPerfAnalyseTimestamp (StdHeader) +#else + #define IDS_PERF_TIMESTAMP(ID, StdHeader) + #define IDS_PERF_ANALYSE(StdHeader) +#endif + +///For IDS feat use +#define IDS_FAMILY_ALL 0xFFFFFFFFFFFFFFFFull +#define IDS_BSP_ONLY TRUE +#define IDS_ALL_CORES FALSE + +#define IDS_LATE_RUN_AP_TASK_ID PROC_IDS_LIBRARY_IDSLIB_FILECODE + +#define IDS_CALLOUT_INIT 0x01 ///< The function data of IDS callout function of initialization. + +#define IDS_CALLOUT_GNB_PPFUSE_OVERRIDE 0x83 ///< The function data of IDS callout function of GNB pp fuse table. +#define IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG 0x84 ///< The function data of IDS callout function of GNB integrated table. +#define IDS_CALLOUT_GNB_NB_POWERGATE_CONFIG 0x85 ///< The function data of IDS callout function of GNB NB power gate config. +#define IDS_CALLOUT_GNB_PCIE_POWERGATE_CONFIG 0x86 ///< The function data of IDS callout function of GNB PCIE power gateconfig. +#define IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG 0x87 ///< The function data of IDS callout function of GNB pcie platform config. +#define IDS_CALLOUT_GNB_PCIE_PHY_CONFIG 0x88 ///< The function data of IDS callout function of GNB pcie PHY config. +#define IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE 0x89 ///< The function data of IDS callout function of GNB GMM register override +#define IDS_CALLOUT_FCH_INIT_RESET 0x8A ///< The function data of IDS callout function of FchInitReset +#define IDS_CALLOUT_FCH_INIT_ENV 0x8B ///< The function data of IDS callout function of FchInitEnv. +#define IDS_CALLOUT_POWER_PLAN_INIT 0x8C ///< The function data of IDS callout function of Override Power Plan Init +#define IDS_CALLOUT_GET_PERF_BUFFER 0x8D ///< The function data of IDS callout function of get platform performance buffer. +#define IDS_CALLOUT_GNB_PACKAGE_POWER_CONFIG 0x8E ///< The function data of IDS callout function of Bapm Package Power. +#define IDS_CALLOUT_SMU_PORT80_LOGGING_BUFFER 0x8F ///< The function data of IDS callout function of SMU port80 logging buffer. +#define IDS_CALLOUT_GNB_BEFORE_EARLY_INIT 0x90 ///< The function data of IDS callout function of GNB before early init. +#define IDS_CALLOUT_GNB_SMUBIOSTABLE_OVERRIDE 0x91 ///< The function data of IDS callout function of GNB smu bios table. +#define IDS_CALLOUT_GNB_PCIE_EARLY_PORT_CONFIG 0x92 ///< The function data of IDS callout function of GNB pcie early port config. + +/// Function entry for HDT script to call +typedef struct _SCRIPT_FUNCTION { + UINT32 FuncAddr; ///< Function address in ROM + CHAR8 FuncName[40]; ///< Function name +} SCRIPT_FUNCTION; + +/// Data Structure for Mem ECC parameter override +typedef struct { + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood +} ECC_OVERRIDE_STRUCT; + + + + +/** + * AGESA Test Points + * + * These are the values displayed to the user to indicate progress through boot. + * These can be used in a debug environment to stop the debugger at a specific + * test point: + * For SimNow!, this command + * bi 81 w vb 49 + * will stop the debugger on one of the TracePoints (49 is the TP value in this example). + * + */ +typedef enum { + StartProcessorTestPoints, ///< 00 Entry used for range testing for @b Processor related TPs + + // Memory test points + TpProcMemBeforeMemDataInit, ///< 01 .. Memory structure initialization (Public interface) + TpProcMemBeforeSpdProcessing, ///< 02 .. SPD Data processing (Public interface) + TpProcMemAmdMemAuto, ///< 03 .. Memory configuration (Public interface) + TpProcMemDramInit, ///< 04 .. DRAM initialization + TpProcMemSPDChecking, ///< 05 .. + TpProcMemModeChecking, ///< 06 .. + TpProcMemSpeedTclConfig, ///< 07 .. Speed and TCL configuration + TpProcMemSpdTiming, ///< 08 .. + TpProcMemDramMapping, ///< 09 .. + TpProcMemPlatformSpecificConfig, ///< 0A .. + TPProcMemPhyCompensation, ///< 0B .. + TpProcMemStartDcts, ///< 0C .. + TpProcMemBeforeDramInit, ///< 0D .. (Public interface) + TpProcMemPhyFenceTraining, ///< 0E .. + TpProcMemSynchronizeDcts, ///< 0F .. + TpProcMemSystemMemoryMapping, ///< 10 .. + TpProcMemMtrrConfiguration, ///< 11 .. + TpProcMemDramTraining, ///< 12 .. + TpProcMemBeforeAnyTraining, ///< 13 .. (Public interface) + TpProcMemWriteLevelizationTraining, ///< 14 .. + TpProcMemWlFirstPass, ///< 15 .. Below 800Mhz first pass start + TpProcMemWlSecondPass, ///< 16 .. Above 800Mhz second pass start + TpProcMemWlTrainTargetDimm, ///< 17 .. Target DIMM configured + TpProcMemWlPrepDimms, ///< 18 .. Prepare DIMMS for WL + TpProcMemWlConfigDimms, ///< 19 .. Configure DIMMS for WL + TpProcMemReceiverEnableTraining, ///< 1A .. + TpProcMemRcvrStartSweep, ///< 1B .. Start sweep loop + TpProcMemRcvrSetDelay, ///< 1C .. Set receiver Delay + TpProcMemRcvrWritePattern, ///< 1D .. Write test pattern + TpProcMemRcvrReadPattern, ///< 1E .. Read test pattern + TpProcMemRcvrTestPattern, ///< 1F .. Compare test pattern + TpProcMemRcvrCalcLatency, ///< 20 .. Calculate MaxRdLatency per channel + TpProcMemReceiveDqsTraining, ///< 21 .. + TpProcMemRcvDqsSetDelay, ///< 22 .. Set Write Data delay + TpProcMemRcvDqsWritePattern, ///< 23 .. Write test pattern + TpProcMemRcvDqsStartSweep, ///< 24 .. Start read sweep + TpProcMemRcvDqsSetRcvDelay, ///< 25 .. Set Receive DQS delay + TpProcMemRcvDqsReadPattern, ///< 26 .. Read Test pattern + TpProcMemRcvDqsTstPattern, ///< 27 .. Compare Test pattern + TpProcMemRcvDqsResults, ///< 28 .. Update results + TpProcMemRcvDqsFindWindow, ///< 29 .. Start Find passing window + TpProcMemTransmitDqsTraining, ///< 2A .. + TpProcMemTxDqStartSweep, ///< 2B .. Start write sweep + TpProcMemTxDqSetDelay, ///< 2C .. Set Transmit DQ delay + TpProcMemTxDqWritePattern, ///< 2D .. Write test pattern + TpProcMemTxDqReadPattern, ///< 2E .. Read Test pattern + TpProcMemTxDqTestPattern, ///< 2F .. Compare Test pattern + TpProcMemTxDqResults, ///< 30 .. Update results + TpProcMemTxDqFindWindow, ///< 31 .. Start Find passing window + TpProcMemMaxRdLatencyTraining, ///< 32 .. + TpProcMemMaxRdLatStartSweep, ///< 33 .. Start sweep + TpProcMemMaxRdLatSetDelay, ///< 34 .. Set delay + TpProcMemMaxRdLatWritePattern, ///< 35 .. Write test pattern + TpProcMemMaxRdLatReadPattern, ///< 36 .. Read Test pattern + TpProcMemMaxRdLatTestPattern, ///< 37 .. Compare Test pattern + TpProcMemOnlineSpareInit, ///< 38 .. Online Spare init + TpProcMemBankInterleaveInit, ///< 39 .. Bank Interleave Init + TpProcMemNodeInterleaveInit, ///< 3A .. Node Interleave Init + TpProcMemChannelInterleaveInit, ///< 3B .. Channel Interleave Init + TpProcMemEccInitialization, ///< 3C .. ECC initialization + TpProcMemPlatformSpecificInit, ///< 3D .. Platform Specific Init + TpProcMemBeforeAgesaReadSpd, ///< 3E .. Before callout for "AgesaReadSpd" + TpProcMemAfterAgesaReadSpd, ///< 3F .. After callout for "AgesaReadSpd" + TpProcMemBeforeAgesaHookBeforeDramInit, ///< 40 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeDramInit, ///< 41 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining" + TpProcMemAfterAgesaHookBeforeDQSTraining, ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining" + TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeExitSelfRef, ///< 45 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterMemDataInit, ///< 46 .. After MemDataInit + TpProcMemInitializeMCT, ///< 47 .. Before InitializeMCT + TpProcMemLvDdr3, ///< 48 .. Before LV DDR3 + TpProcMemInitMCT, ///< 49 .. Before InitMCT + TpProcMemOtherTiming, ///< 4A.. Before OtherTiming + TpProcMemUMAMemTyping, ///< 4B .. Before UMAMemTyping + TpProcMemSetDqsEccTmgs, ///< 4C .. Before SetDqsEccTmgs + TpProcMemMemClr, ///< 4D .. Before MemClr + TpProcMemOnDimmThermal, ///< 4E .. Before On DIMM Thermal + TpProcMemDmi, ///< 4F .. Before DMI + TpProcMemEnd, ///< 50 .. End of memory code + + // CPU test points + TpProcCpuEntryDmi, ///< 51 .. Entry point CreateDmiRecords + TpProcCpuEntryPstate, ///< 52 .. Entry point GenerateSsdt + TpProcCpuEntryPstateLeveling, ///< 53 .. Entry point PStateLeveling + TpProcCpuEntryPstateGather, ///< 54 .. Entry point PStateGatherData + TpProcCpuEntryWhea, ///< 55 .. Entry point CreateAcpiWhea + TpProcCpuEntrySrat, ///< 56 .. Entry point CreateAcpiSrat + TpProcCpuEntrySlit, ///< 57 .. Entry point CreateAcpiSlit + TpProcCpuProcessRegisterTables, ///< 58 .. Register table processing + TpProcCpuSetBrandID, ///< 59 .. Set brand ID + TpProcCpuLocalApicInit, ///< 5A .. Initialize local APIC + TpProcCpuLoadUcode, ///< 5B .. Load microcode patch + TpProcCpuBeforePMFeatureInit, ///< 5C .. BeforePM feature dispatch point + TpProcCpuPowerMgmtInit, ///< 5D .. Power Management table processing + TpProcCpuEarlyFeatureInit, ///< 5E .. Early feature dispatch point + TpProcCpuCoreLeveling, ///< 5F .. Core Leveling + TpProcCpuApMtrrSync, ///< 60 .. AP MTRR sync up + TpProcCpuPostFeatureInit, ///< 61 .. POST feature dispatch point + TpProcCpuBeforeRelinquishAPsFeatureInit = 0x63, ///< 63 .. Before Relinquishing control of APs feature dispatch point + TpProcCpuBeforeAllocateWheaBuffer, ///< 64 .. Before the WHEA init code calls out to allocate a buffer + TpProcCpuAfterAllocateWheaBuffer, ///< 65 .. After the WHEA init code calls out to allocate a buffer + TpProcCpuBeforeAllocateSratBuffer, ///< 66 .. Before the SRAT init code calls out to allocate a buffer + TpProcCpuAfterAllocateSratBuffer, ///< 67 .. After the SRAT init code calls out to allocate a buffer + TpProcCpuBeforeLocateSsdtBuffer, ///< 68 .. Before the P-state init code calls out to locate a buffer + TpProcCpuAfterLocateSsdtBuffer, ///< 69 .. After the P-state init code calls out to locate a buffer + TpProcCpuBeforeAllocateSsdtBuffer, ///< 6A .. Before the P-state init code calls out to allocate a buffer + TpProcCpuAfterAllocateSsdtBuffer, ///< 6B .. After the P-state init code calls out to allocate a buffer + TpProcCpuEntryCrat, ///< 6C .. Entry point CreateAcpiCrat + TpProcCpuEntryCdit, ///< 6D .. Entry point CreateAcpiCdit + TpProcCpuEntryScs, ///< 6E .. Entry point InitializeScsFeature + + // Topology test points + TpProcTopologyEntry = 0x71, ///< 71 .. Topology Init begin + TpProcTopologyDone = 0x7C, ///< 7C .. Topology Init complete + + // Extended memory test point + TpProcMemSendMRS2 = 0x80, ///< 80 .. Sending MRS2 + TpProcMemSendMRS3, ///< 81 .. Sedding MRS3 + TpProcMemSendMRS1, ///< 82 .. Sending MRS1 + TpProcMemSendMRS0, ///< 83 .. Sending MRS0 + TpProcMemContinPatternGenRead, ///< 84 .. Continuous Pattern Read + TpProcMemContinPatternGenWrite, ///< 85 .. Continuous Pattern Write + TpProcMem2dRdDqsTraining, ///< 86 .. Mem: 2d RdDqs Training begin + TpProcMemBefore2dTrainExtVrefChange,///< 87 .. Mem: Before optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemAfter2dTrainExtVrefChange, ///< 88 .. Mem: After optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemConfigureDCTForGeneral, ///< 89 .. Configure DCT For General use begin + TpProcMemProcConfigureDCTForTraining, ///< 8A .. Configure DCT For training begin + TpProcMemConfigureDCTNonExplicitSeq,///< 8B .. Configure DCT For Non-Explicit + TpProcMemSynchronizeChannels, ///< 8C .. Configure to Sync channels + TpProcMemC6StorageAllocation, ///< 8D .. Allocate C6 Storage + + // Gnb Earlier init + TpGnbEarlierPcieConfigurationInit = 0x90, ///< 90 .. GNB earlier PCIE configuration init + TpGnbEarlierInterface = 0x91, ///< 91 .. GNB earlier interface + // Gnb Early init + TpGnbEarlyInterface = 0x92, ///< 92 .. GNB early interface + TpGnbPcieConfigurationMap, ///< 93 .. GNB early PCIE configuration map + TpGnbPcieEarlyInterface, ///< 94 .. GNB early PCIE interface + //Gnb post init + TpGnbPciePostEarlyInterface = 0x95, ///< 95 .. GNB post early interface + TpGnbGfxConfigPostInterface, ///< 96 .. GNB post GFX config interface + TpGnbGfxPostInterface, ///< 97 .. GNB post GFX interface + // Gnb post after DRAM init + TpGnbPostInterface = 0x98, ///< 98 .. GNB post after DRAM interface + TpGnbPciePostInterface, ///< 99 .. GNB post after DRAM PCIE interface + // Gnb Env init + TpGnbEnvInterface, ///< 9A .. GNB Env Nb interface + TpGnbPcieEnvInterface, ///< 9B .. GNB Env PCIE interface + TpGnbGfxConfigEnvInterface, ///< 9C .. GNB Env GFX Config interface + TpGnbGfxEnvInterface, ///< 9D .. GNB Env GFX interface + // Gnb Mid init + TpGnbGfxConfigMidInterface = 0xA1, ///< A1 .. GNB Mid GFX config interface + TpGnbGfxMidInterface, ///< A2 .. GNB Mid GFX interface + TpPcieMidInterface, ///< A3 .. GNB Mid PCIE interface + TpGnbMidInterface, ///< A4 .. GNB Mid interface + TpNbLclkFeature, ///< A5 .. GNB Mid Nclk feature + TpPciePowerGateFeature, ///< A6 .. GNB Mid pcie power gate feature + TpGnbPcieMaxPayloadInterface, ///< A7 .. GNB Mid pcie max payload interface + TpGnbPcieClkPmInterface, ///< A8 .. GNB Mid pcie clk pm port interface + TpGnbPcieAspmInterface, ///< A9 .. GNB Mid pcie ASPM interface + TpGnbNbIoapicInterface, ///< AA .. GNB Mid IOAPIC interface + // Gnb Late init + TpGnbPcieAlibFeature = 0xAB, ///< AB .. GNB Late pcie ALIB feature + TpGnbIommuIvrsTable, ///< AC .. GNB Late pcie IOMMU + // Gnb S3 Save + TpGnbGfxInitSview = 0xAD, ///< AD .. GNB S3SAVE GFX sview init + TpGnbAlibDispatchFeature = 0xAE, ///< AE .. GNB ALIB dispatch feature + EndGnbTestPoints = 0xAF, ///< AF End of TP range for GNB + + StartFchTestPoints = 0xB0, ///< B0 Entry used for range testing for @b FCH related TPs + TpFchInitResetDispatching, ///< B1 .. FCH InitReset dispatch point + TpFchGppBeforePortTraining, ///< B2 .. Before FCH GPP port training + TpFchGppGen1PortPolling, ///< B3 .. FCH GPP port polling with GEN1 speed + TpFchGppGen2PortPolling, ///< B4 .. FCH GPP port polling with GEN2 speed + TpFchGppAfterPortTraining, ///< B5 .. After FCH GPP port training + TpFchInitEnvDispatching, ///< B6 .. FCH InitEnv dispatch point + TpFchInitMidDispatching, ///< B7 .. FCH InitMid dispatch point + TpFchInitLateDispatching, ///< B8 .. FCH InitLate dispatch point + TpFchGppHotPlugging, ///< B9 .. FCH GPP hot plug event + TpFchGppHotUnplugging, ///< BA .. AFCH GPP hot unplug event + TpFchInitS3EarlyDispatching, ///< BB .. FCH InitS3Early dispatch point + TpFchInitS3LateDispatching, ///< BC .. FCH InitS3Late dispatch point + EndFchTestPoints, ///< BF End of TP range for FCH + + // Interface test points + TpIfAmdInitResetEntry = 0xC0, ///< C0 .. Entry to AmdInitReset + TpIfAmdInitResetExit, ///< C1 .. Exiting from AmdInitReset + TpIfAmdInitRecoveryEntry, ///< C2 .. Entry to AmdInitRecovery + TpIfAmdInitRecoveryExit, ///< C3 .. Exiting from AmdInitRecovery + TpIfAmdInitEarlyEntry, ///< C4 .. Entry to AmdInitEarly + TpIfAmdInitEarlyExit, ///< C5 .. Exiting from AmdInitEarly + TpIfAmdInitPostEntry, ///< C6 .. Entry to AmdInitPost + TpIfAmdInitPostExit, ///< C7 .. Exiting from AmdInitPost + TpIfAmdInitEnvEntry, ///< C8 .. Entry to AmdInitEnv + TpIfAmdInitEnvExit, ///< C9 .. Exiting from AmdInitEnv + TpIfAmdInitMidEntry, ///< CA .. Entry to AmdInitMid + TpIfAmdInitMidExit, ///< CB .. Exiting from AmdInitMid + TpIfAmdInitLateEntry, ///< CC .. Entry to AmdInitLate + TpIfAmdInitLateExit, ///< CD .. Exiting from AmdInitLate + TpIfAmdS3SaveEntry, ///< CE .. Entry to AmdS3Save + TpIfAmdS3SaveExit, ///< CF .. Exiting from AmdS3Save + TpIfAmdInitResumeEntry, ///< D0 .. Entry to AmdInitResume + TpIfAmdInitResumeExit, ///< D1 .. Exiting from AmdInitResume + TpIfAmdS3LateRestoreEntry, ///< D2 .. Entry to AmdS3LateRestore + TpIfAmdS3LateRestoreExit, ///< D3 .. Exiting from AmdS3LateRestore + TpIfAmdLateRunApTaskEntry, ///< D4 .. Entry to AmdS3LateRestore + TpIfAmdLateRunApTaskExit, ///< D5 .. Exiting from AmdS3LateRestore + TpIfAmdReadEventLogEntry, ///< D6 .. Entry to AmdReadEventLog + TpIfAmdReadEventLogExit, ///< D7 .. Exiting from AmdReadEventLog + TpIfAmdGetApicIdEntry, ///< D8 .. Entry to AmdGetApicId + TpIfAmdGetApicIdExit, ///< D9 .. Exiting from AmdGetApicId + TpIfAmdGetPciAddressEntry, ///< DA .. Entry to AmdGetPciAddress + TpIfAmdGetPciAddressExit, ///< DB .. Exiting from AmdGetPciAddress + TpIfAmdIdentifyCoreEntry, ///< DC .. Entry to AmdIdentifyCore + TpIfAmdIdentifyCoreExit, ///< DD .. Exiting from AmdIdentifyCore + TpIfBeforeRunApFromIds, ///< DE .. After IDS calls out to run code on an AP + TpIfAfterRunApFromIds, ///< DF .. After IDS calls out to run code on an AP + TpIfBeforeGetIdsData, ///< E0 .. Before IDS calls out to get IDS data + TpIfAfterGetIdsData, ///< E1 .. After IDS calls out to get IDS data + TpIfBeforeAllocateHeapBuffer, ///< E2 .. Before the heap manager calls out to allocate a buffer + TpIfAfterAllocateHeapBuffer, ///< E3 .. After the heap manager calls out to allocate a buffer + TpIfBeforeDeallocateHeapBuffer, ///< E4 .. Before the heap manager calls out to deallocate a buffer + TpIfAfterDeallocateHeapBuffer, ///< E5 .. After the heap manager calls out to deallocate a buffer + TpIfBeforeLocateHeapBuffer, ///< E6 .. Before the heap manager calls out to locate a buffer + TpIfAfterLocateHeapBuffer, ///< E7 .. After the heap manager calls out to locate a buffer + TpIfBeforeRunApFromAllAps, ///< E8 .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllAps, ///< E9 .. After the BSP calls out to run code on an AP + TpIfBeforeRunApFromAllCore0s, ///< EA .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllCore0s, ///< EB .. After the BSP calls out to run code on an AP + TpIfBeforeAllocateS3SaveBuffer, ///< EC .. Before the S3 save code calls out to allocate a buffer + TpIfAfterAllocateS3SaveBuffer, ///< ED .. After the S3 save code calls out to allocate a buffer + TpIfBeforeAllocateMemoryS3SaveBuffer, ///< EE .. Before the memory S3 save code calls out to allocate a buffer + TpIfAfterAllocateMemoryS3SaveBuffer, ///< EF .. After the memory S3 save code calls out to allocate a buffer + TpIfBeforeLocateS3PciBuffer, ///< F0 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3PciBuffer, ///< F1 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CPciBuffer, ///< F2 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CPciBuffer, ///< F3 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3MsrBuffer, ///< F4 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3MsrBuffer, ///< F5 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CMsrBuffer, ///< F6 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CMsrBuffer, ///< F7 .. After the memory code calls out to locate a buffer + TpReadyToBoot, ///< F8 .. Ready to boot event + // PMU test points + TpProcMemPmuFailed, ///< F9 .. Failed PMU training. + TpIfAmdS3FinalRestoreEntry, ///< FA .. Entry to AmdS3FinalRestore + TpIfAmdS3FinalRestoreExit, ///< FB .. Exiting from AmdS3FinalRestore + + EndAgesaTps = 0xFF, ///< Last defined AGESA TP +} AGESA_TP; + +///Ids Feat description +typedef enum { + IDS_FEAT_UCODE_UPDATE = 0x0000, ///< Feat for Ucode Update + IDS_FEAT_TARGET_PSTATE, ///< Feat for Target Pstate + IDS_FEAT_POSTPSTATE, ///< Feat for Post Pstate + IDS_FEAT_ECC_CTRL, ///< Feat for Ecc Control + IDS_FEAT_ECC_SYMBOL_SIZE, ///< Feat for Ecc symbol size + IDS_FEAT_DCT_ALLMEMCLK, ///< Feat for all memory clock + IDS_FEAT_DCT_GANGMODE, ///< Feat for Dct gang mode + IDS_FEAT_DCT_BURSTLENGTH, ///< Feat for dct burst length + IDS_FEAT_DCT_POWERDOWN, ///< Feat for dct power down + IDS_FEAT_DCT_DLLSHUTDOWN, ///< Feat for dct dll shut down + IDS_FEAT_HDTOUT, ///< Feat for hdt out + IDS_FEAT_GNB_PLATFORMCFG, ///< Feat for override GNB platform config + IDS_FEAT_CPB_CTRL, ///< Feat for Config the Core peformance boost feature + IDS_FEAT_HTC_CTRL, ///< Feat for Hardware Thermal Control + IDS_FEAT_MEMORY_MAPPING, ///< Feat for Memory Mapping + IDS_FEAT_POWER_POLICY, ///< Feat for Power Policy + IDS_FEAT_NV_TO_CMOS, ///< Feat for Save BSP Nv to CMOS + IDS_FEAT_COMMON, ///< Common Feat + IDS_FEAT_END = 0xFF ///< End of Common feat +} IDS_FEAT; + +///Ids IDT table function ID +typedef enum { + IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000, ///< Function ID for saving IDTR for BSC + IDS_IDT_RESTORE_IDTR_FOR_BSC, ///< Function ID for restoring IDTR for BSC + IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, ///< Function ID for updating exception vector +} IDS_IDT_FUNC_ID; + +typedef IDS_STATUS IDS_COMMON_FUNC ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC; + +/// Data Structure of IDS Feature block +typedef struct _IDS_FAMILY_FEAT_STRUCT { + IDS_FEAT IdsFeat; ///< Ids Feat ID + BOOLEAN IsBsp; ///< swith for Bsp check + AGESA_IDS_OPTION IdsOption; ///< IDS option + UINT64 CpuFamily; ///< + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_FAMILY_FEAT_STRUCT; + + +/// Data Structure of IDS option +typedef struct _IDS_OPTION_STRUCT { + AGESA_IDS_OPTION idsoption; ///< IDS option + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_OPTION_STRUCT; + +/// Data Structure of IDS option table +typedef struct _IDS_OPTION_STRUCT_TBL { + UINT8 version; ///<Version of IDS option table + UINT16 size; ///<Size of IDS option table + CONST IDS_OPTION_STRUCT *pIdsOptionStruct; ///<pointer to array of structure +} IDS_OPTION_STRUCT_TBL; + +#define IDS_NV_TO_CMOS_LEN_BYTE 1 +#define IDS_NV_TO_CMOS_LEN_WORD 2 +#define IDS_NV_TO_CMOS_LEN_END 0xFF +#define IDS_NV_TO_CMOS_ID_END 0xFFFF + +/// Data struct of set/get NV to/from CMOS +typedef struct _IDS_NV_TO_CMOS { + UINT8 Length; ///< Length of NV + UINT16 IDS_NV_ID; ///< IDS id +} IDS_NV_TO_CMOS; + +IDS_STATUS +AmdIdsCtrlDispatcher ( + IN AGESA_IDS_OPTION IdsOption, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsOptionCallout ( + IN UINTN CallOutId, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutInit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3Exit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3ApExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsDebugPrint ( + IN UINT64 Flag, + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintTopology ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintCpu ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintMem ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintGnb ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintAll ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsHdtOutBufferFlush ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsMemTimeOut ( + IN OUT VOID *DataPtr + ); + +VOID +IdsAgesaTestPoint ( + IN AGESA_TP TestPoint, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * IDS Backend Function for ASSERT + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + * @retval TRUE No error +**/ +BOOLEAN +IdsAssert ( + IN UINT32 FileCode + ); + +/** + * The engine code for ASSERT MACRO + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + */ +BOOLEAN +IdsErrorStop ( + IN UINT32 FileCode + ); + +VOID +IdsDelay ( + IN VOID + ); + +BOOLEAN +AmdHeapIntactCheck ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsCarCorruptionCheck ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +IdsExceptionTrap ( + IN IDS_IDT_FUNC_ID IdsIdtFuncId, + IN VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfTimestamp ( + IN UINT32 LineInFile, + IN UINT32 Description, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfAnalyseTimestamp ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IEM_SKIP_CODE + #undef IEM_INSERT_CODE +#endif +#ifndef IEM_SKIP_CODE + #define IEM_SKIP_CODE(L) +#endif +#ifndef IEM_INSERT_CODE + #define IEM_INSERT_CODE(L, Fn, Parm) +#endif + +#endif // _IDS_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Include/IdsPerf.h b/src/vendorcode/amd/pi/00630F01/Include/IdsPerf.h new file mode 100644 index 0000000000..c11db8b9d5 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/IdsPerf.h @@ -0,0 +1,138 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Routines for performance analysis + * + * Contains AMD AGESA debug macros and functions for performance analysis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _IDS_PERFORMANCE_DATA_POINT + + #define _IDS_PERFORMANCE_DATA_POINT + #define IDS_PERF_VERSION 0x00010000ul //version number 0.1.0.0 +/// Time points performance function used + typedef enum { + TP_BEGINPROCAMDINITEARLY = 0x100, ///< BeginProcAmdInitEarly + TP_ENDPROCAMDINITEARLY = 0x101, ///< EndProcAmdInitEarly + TP_BEGINAMDTOPOINITIALIZE = 0x102, ///< BeginAmdTopoInitialize + TP_ENDAMDTOPOINITIALIZE = 0x103, ///< EndAmdTopoInitialize + TP_BEGINGNBINITATEARLIER = 0x104, ///< BeginGnbInitAtEarlier + TP_ENDGNBINITATEARLIER = 0x105, ///< EndGnbInitAtEarlier + TP_BEGINAMDCPUEARLY = 0x106, ///< BeginAmdCpuEarly + TP_ENDAMDCPUEARLY = 0x107, ///< EndAmdCpuEarly + TP_BEGINGNBINITATEARLY = 0x108, ///< BeginGnbInitAtEarly + TP_ENDGNBINITATEARLY = 0x109, ///< EndGnbInitAtEarly + TP_BEGINPROCAMDINITENV = 0x10A, ///< BeginProcAmdInitEnv + TP_ENDPROCAMDINITENV = 0x10B, ///< EndProcAmdInitEnv + TP_BEGININITENV = 0x10C, ///< BeginInitEnv + TP_ENDINITENV = 0x10D, ///< EndInitEnv + TP_BEGINGNBINITATENV = 0x10E, ///< BeginGnbInitAtEnv + TP_ENDGNBINITATENV = 0x10F, ///< EndGnbInitAtEnv + TP_BEGINPROCAMDINITLATE = 0x110, ///< BeginProcAmdInitLate + TP_ENDPROCAMDINITLATE = 0x111, ///< EndProcAmdInitLate + TP_BEGINCREATSYSTEMTABLE = 0x112, ///< BeginCreatSystemTable + TP_ENDCREATSYSTEMTABLE = 0x113, ///< EndCreatSystemTable + TP_BEGINDISPATCHCPUFEATURESLATE = 0x114, ///< BeginDispatchCpuFeaturesLate + TP_ENDDISPATCHCPUFEATURESLATE = 0x115, ///< EndDispatchCpuFeaturesLate + TP_BEGINAMDCPULATE = 0x116, ///< BeginAmdCpuLate + TP_ENDAMDCPULATE = 0x117, ///< EndAmdCpuLate + TP_BEGINGNBINITATLATE = 0x118, ///< BeginGnbInitAtLate + TP_ENDGNBINITATLATE = 0x119, ///< EndGnbInitAtLate + TP_BEGINPROCAMDINITMID = 0x11A, ///< BeginProcAmdInitMid + TP_ENDPROCAMDINITMID = 0x11B, ///< EndProcAmdInitMid + TP_BEGININITMID = 0x11E, ///< BeginInitMid + TP_ENDINITMID = 0x11F, ///< EndInitMid + TP_BEGINGNBINITATMID = 0x120, ///< BeginGnbInitAtMid + TP_ENDGNBINITATMID = 0x121, ///< EndGnbInitAtMid + TP_BEGINPROCAMDINITPOST = 0x122, ///< BeginProcAmdInitPost + TP_ENDPROCAMDINITPOST = 0x123, ///< EndProcAmdInitPost + TP_BEGINGNBINITATPOST = 0x124, ///< BeginGnbInitAtPost + TP_ENDGNBINITATPOST = 0x125, ///< EndGnbInitAtPost + TP_BEGINAMDMEMAUTO = 0x126, ///< BeginAmdMemAuto + TP_ENDAMDMEMAUTO = 0x127, ///< EndAmdMemAuto + TP_BEGINAMDCPUPOST = 0x128, ///< BeginAmdCpuPost + TP_ENDAMDCPUPOST = 0x129, ///< EndAmdCpuPost + TP_BEGINGNBINITATPOSTAFTERDRAM = 0x12A, ///< BeginGnbInitAtPostAfterDram + TP_ENDGNBINITATPOSTAFTERDRAM = 0x12B, ///< EndGnbInitAtPostAfterDram + TP_BEGINPROCAMDINITRESET = 0x12C, ///< BeginProcAmdInitReset + TP_ENDPROCAMDINITRESET = 0x12D, ///< EndProcAmdInitReset + TP_BEGININITRESET = 0x12E, ///< BeginInitReset + TP_ENDINITRESET = 0x12F, ///< EndInitReset + TP_BEGINHTINITRESET = 0x130, ///< BeginHtInitReset + TP_ENDHTINITRESET = 0x131, ///< EndHtInitReset + TP_BEGINPROCAMDINITRESUME = 0x132, ///< BeginProcAmdInitResume + TP_ENDPROCAMDINITRESUME = 0x133, ///< EndProcAmdInitResume + TP_BEGINAMDMEMS3RESUME = 0x134, ///< BeginAmdMemS3Resume + TP_ENDAMDMEMS3RESUME = 0x135, ///< EndAmdMemS3Resume + TP_BEGINDISPATCHCPUFEATURESS3RESUME = 0x136, ///< BeginDispatchCpuFeaturesS3Resume + TP_ENDDISPATCHCPUFEATURESS3RESUME = 0x137, ///< EndDispatchCpuFeaturesS3Resume + TP_BEGINSETCORESTSCFREQSEL = 0x138, ///< BeginSetCoresTscFreqSel + TP_ENDSETCORESTSCFREQSEL = 0x139, ///< EndSetCoresTscFreqSel + TP_BEGINMEMFMCTMEMCLR_INIT = 0x13A, ///< BeginMemFMctMemClr_Init + TP_ENDNMEMFMCTMEMCLR_INIT = 0x13B, ///< EndnMemFMctMemClr_Init + TP_BEGINMEMBEFOREMEMDATAINIT = 0x13C, ///< BeginMemBeforeMemDataInit + TP_ENDMEMBEFOREMEMDATAINIT = 0x13D, ///< EndMemBeforeMemDataInit + TP_BEGINPROCAMDMEMAUTO = 0x13E, ///< BeginProcAmdMemAuto + TP_ENDPROCAMDMEMAUTO = 0x13F, ///< EndProcAmdMemAuto + TP_BEGINMEMMFLOWC32 = 0x140, ///< BeginMemMFlowC32 + TP_ENDMEMMFLOWC32 = 0x141, ///< EndMemMFlowC32 + TP_BEGINMEMINITIALIZEMCT = 0x142, ///< BeginMemInitializeMCT + TP_ENDMEMINITIALIZEMCT = 0x143, ///< EndMemInitializeMCT + TP_BEGINMEMSYSTEMMEMORYMAPPING = 0x144, ///< BeginMemSystemMemoryMapping + TP_ENDMEMSYSTEMMEMORYMAPPING = 0x145, ///< EndMemSystemMemoryMapping + TP_BEGINMEMDRAMTRAINING = 0x146, ///< BeginMemDramTraining + TP_ENDMEMDRAMTRAINING = 0x147, ///< EndMemDramTraining + TP_BEGINMEMOTHERTIMING = 0x148, ///< BeginMemOtherTiming + TP_ENDMEMOTHERTIMING = 0x149, ///< EndMemOtherTiming + TP_BEGINMEMUMAMEMTYPING = 0x14A, ///< BeginMemUMAMemTyping + TP_ENDMEMUMAMEMTYPING = 0x14B, ///< EndMemUMAMemTyping + TP_BEGINMEMMEMCLR = 0x14C, ///< BeginMemMemClr + TP_ENDMEMMEMCLR = 0x14D, ///< EndMemMemClr + TP_BEGINMEMMFLOWTN = 0x14E, ///< BeginMemMFlowTN + TP_ENDMEMMFLOWTN = 0x14F, ///< EndMemMFlowTN + TP_BEGINAGESAHOOKBEFOREDRAMINIT = 0x150, ///< BeginAgesaHookBeforeDramInit + TP_ENDAGESAHOOKBEFOREDRAMINIT = 0x151, ///< EndAgesaHookBeforeDramInit + TP_BEGINPROCMEMDRAMTRAINING = 0x152, ///< BeginProcMemDramTraining + TP_ENDPROCMEMDRAMTRAINING = 0x153, ///< EndProcMemDramTraining + TP_BEGINGNBINITATS3SAVE = 0x154, ///< BeginGnbInitAtS3Save + TP_ENDGNBINITATS3SAVE = 0x155, ///< EndGnbInitAtS3Save + TP_BEGINGNBLOADSCSDATA = 0x156, ///< BeginGnbLoadScsData + TP_ENDGNBLOADSCSDATA = 0x157, ///< EndGnbLoadScsData + TP_BEGINGNBPCIETRAINING = 0x158, ///< BeginGnbPcieTraining + TP_ENDGNBPCIETRAINING = 0x159, ///< EndGnbPcieTraining + IDS_TP_END ///< End of IDS TP list + } IDS_PERF_DATA; +#endif diff --git a/src/vendorcode/amd/pi/00630F01/Include/Options.h b/src/vendorcode/amd/pi/00630F01/Include/Options.h new file mode 100644 index 0000000000..737dfb7978 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/Options.h @@ -0,0 +1,68 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AGESA options structures + * + * Contains options control structures for the AGESA build options + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _OPTIONS_H_ +#define _OPTIONS_H_ + +/** + * Provide topology limits for loops and runtime, based on supported families. + */ +typedef struct { + UINT32 PlatformNumberOfSockets; ///< The limit to the number of processors based on + ///< supported families and other build options. + UINT32 PlatformNumberOfModules; ///< The limit to the number of modules in a processor, based + ///< on supported families. +} OPTIONS_CONFIG_TOPOLOGY; + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; ///< The function id specified. + IMAGE_ENTRY EntryPoint; ///< The corresponding entry point to call. +} DISPATCH_TABLE; + + +#endif // _OPTIONS_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/pi/00630F01/Include/PlatformMemoryConfiguration.h new file mode 100644 index 0000000000..943bdf7013 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/PlatformMemoryConfiguration.h @@ -0,0 +1,515 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Platform Specific Memory Configuration + * + * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: OPTION + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright 2008 - 2014 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_ +#define _PLATFORM_MEMORY_CONFIGURATION_H_ + +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ +#ifndef PSO_ENTRY + #define PSO_ENTRY UINT8 +#endif + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * PLATFORM SPECIFIC MEMORY DEFINITIONS + *---------------------------------------------------------------------------------------- + */ +/// +/// Memory Speed and DIMM Population Masks +/// +///< DDR Speed Masks +///< Specifies the DDR Speed on a memory channel +/// +#define ANY_SPEED 0xFFFFFFFFul +#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66)) +#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66)) +#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66)) +#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66)) +#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66)) +#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66)) +#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66)) +#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66)) +#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66)) +#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66)) +/// +///< DIMM POPULATION MASKS +///< Specifies the DIMM Population on a channel (can be added together to specify configuration). +///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1 +///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1 +/// +#define ANY_ 0xFF ///< Any dimm configuration the current channel +#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel +#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel +#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel +#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel +#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel +#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel +#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel +#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel +#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel +#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel +#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel +#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel +#define LR_DIMM0 0x0001 ///< Lrdimm in slot 0 on the current channel +#define LR_DIMM1 0x0010 ///< Lrdimm in slot 1 on the current channel +#define LR_DIMM2 0x0100 ///< Lrdimm in slot 2 on the current channel +#define LR_DIMM3 0x1000 ///< Lrdimm in slot 3 on the current channel +#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel +#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel +#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel +#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel +/// +///< CS POPULATION MASKS +///< Specifies the CS Population on a channel (can be added together to specify configuration). +///< ex. CS0 + CS1 : CS0 and CS1 apply to the setting +/// +#define CS_ANY_ 0xFF ///< Any CS configuration +#define CS0_ 0x01 ///< CS0 bit map mask +#define CS1_ 0x02 ///< CS1 bit map mask +#define CS2_ 0x04 ///< CS2 bit map mask +#define CS3_ 0x08 ///< CS3 bit map mask +#define CS4_ 0x10 ///< CS4 bit map mask +#define CS5_ 0x20 ///< CS5 bit map mask +#define CS6_ 0x40 ///< CS6 bit map mask +#define CS7_ 0x80 ///< CS7 bit map mask +/// +///< Number of Dimms on the current channel +///< This is a mask used to indicate the number of dimms in a channel +///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms) +/// +#define ANY_NUM 0xFF ///< Any number of Dimms +#define NO_DIMM 0x00 ///< No Dimms present +#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel +#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel +#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel +#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel + +/// +///< DIMM VOLTAGE MASKS +/// +#define VOLT_ANY_ 0xFF ///< Any voltage configuration +#define VOLT1_5_ 0x01 ///< Voltage 1.5V bit map mask +#define VOLT1_35_ 0x02 ///< Voltage 1.35V bit map mask +#define VOLT1_25_ 0x04 ///< Voltage 1.25V bit map mask + +// +// < Not applicable +// +#define NA_ 0 ///< Not applicable + +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Override Definitions for Socket, Channel and Dimm + * This indicates where a platform override will be applied. + * + *---------------------------------------------------------------------------------------- + */ +/// +///< SOCKET MASKS +///< Indicates associated processor sockets to apply override settings +/// +#define ANY_SOCKET 0xFF ///< Apply to all sockets +#define SOCKET0 0x01 ///< Apply to socket 0 +#define SOCKET1 0x02 ///< Apply to socket 1 +#define SOCKET2 0x04 ///< Apply to socket 2 +#define SOCKET3 0x08 ///< Apply to socket 3 +#define SOCKET4 0x10 ///< Apply to socket 4 +#define SOCKET5 0x20 ///< Apply to socket 5 +#define SOCKET6 0x40 ///< Apply to socket 6 +#define SOCKET7 0x80 ///< Apply to socket 7 +/// +///< CHANNEL MASKS +///< Indicates Memory channels where override should be applied +/// +#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels +#define CHANNEL_A 0x01 ///< Apply to Channel A +#define CHANNEL_B 0x02 ///< Apply to Channel B +#define CHANNEL_C 0x04 ///< Apply to Channel C +#define CHANNEL_D 0x08 ///< Apply to Channel D +/// +/// DIMM MASKS +/// Indicates Dimm Slots where override should be applied +/// +#define ALL_DIMMS 0xFF ///< Apply to all dimm slots +#define DIMM0 0x01 ///< Apply to Dimm Slot 0 +#define DIMM1 0x02 ///< Apply to Dimm Slot 1 +#define DIMM2 0x04 ///< Apply to Dimm Slot 2 +#define DIMM3 0x08 ///< Apply to Dimm Slot 3 +/// +/// REGISTER ACCESS MASKS +/// Not supported as an at this time +/// +#define ACCESS_NB0 0x0 +#define ACCESS_NB1 0x1 +#define ACCESS_NB2 0x2 +#define ACCESS_NB3 0x3 +#define ACCESS_NB4 0x4 +#define ACCESS_PHY 0x5 +#define ACCESS_DCT_XT 0x6 +/// +/// MOTHER BOARD DESIGN LAYERS MASKS +/// Indicates the layer design of mother board +/// +#define LAYERS_4 0x0 +#define LAYERS_6 0x1 +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Overriding Table Definitions + * + *---------------------------------------------------------------------------------------- + */ + +#define PSO_END 0 ///< Table End +#define PSO_CKE_TRI 1 ///< CKE Tristate Map +#define PSO_ODT_TRI 2 ///< ODT Tristate Map +#define PSO_CS_TRI 3 ///< CS Tristate Map +#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel +#define PSO_CLK_SPEED 5 ///< Clock Speed +#define PSO_DIMM_TYPE 6 ///< Dimm Type +#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map +#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket +#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed +#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel +#define PSO_MEM_TECH 11 ///< Channel Memory Type +#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay +#define PSO_RXEN_SEED 13 ///< Hardwared based RxEn seed +#define PSO_NO_LRDIMM_CS67_ROUTING 14 ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs +#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15 ///< Soldered down SODIMM type +#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V +#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17 ///< Min RD/WR dataeye width +#define PSO_CPU_FAMILY_TO_OVERRIDE 18 ///< CPU family signature to tell following PSO macros are CPU family dependent +#define PSO_MAX_SOLDERED_DOWN_DIMMS 19 ///< Max Soldered-down Dimms per channel +#define PSO_MEMORY_POWER_POLICY 20 ///< Memory power policy override +#define PSO_MOTHER_BOARD_LAYERS 21 ///< Mother board layer design + +/*---------------------------------- + * CONDITIONAL PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition Types +#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types +#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block +#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected +#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel +#define PSO_CONDITION_REG 103 // Reserved +#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types +// Action Types +#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types +#define PSO_ACTION_ODT 120 ///< ODT values to override +#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override +#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override +#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override +#define PSO_ACTION_REG 124 // Reserved +#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration +#define PSO_ACTION_MAX 125 ///< End of Action Entry Types +#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types + +/*---------------------------------- + * TABLE DRIVEN PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition descriptor +#define PSO_TBLDRV_CONFIG 200 ///< Configuration Descriptor + +// Overriding entry types +#define PSO_TBLDRV_START 210 ///< Start of Table Driven Overriding Entry Types +#define PSO_TBLDRV_SPEEDLIMIT 210 ///< Speed Limit +#define PSO_TBLDRV_ODT_RTTNOM 211 ///< RttNom +#define PSO_TBLDRV_ODT_RTTWR 212 ///< RttWr +#define PSO_TBLDRV_ODTPATTERN 213 ///< Odt Patterns +#define PSO_TBLDRV_ADDRTMG 214 ///< Address/Timing values +#define PSO_TBLDRV_ODCCTRL 215 ///< ODC Control values +#define PSO_TBLDRV_SLOWACCMODE 216 ///< Slow Access Mode +#define PSO_TBLDRV_MR0_CL 217 ///< MR0[CL] +#define PSO_TBLDRV_MR0_WR 218 ///< MR0[WR] +#define PSO_TBLDRV_RC2_IBT 219 ///< RC2[IBT] +#define PSO_TBLDRV_RC10_OPSPEED 220 ///< RC10[Opearting Speed] +#define PSO_TBLDRV_LRDIMM_IBT 221 ///< LrDIMM IBT +#define PSO_TBLDRV_2D_TRAINING 222 ///< 2D training +#define PSO_TBLDRV_INVALID_TYPE 223 ///< Invalid Type +#define PSO_TBLDRV_END 223 ///< End of Table Driven Overriding Entry Types + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \ + PSO_CPU_FAMILY_TO_OVERRIDE, 4, \ + ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF) + +#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \ + , Bit7Map + +#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_CKE_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map + +#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \ + PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel + +#define NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfSolderedDownDimmsPerChannel) \ + PSO_MAX_SOLDERED_DOWN_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfSolderedDownDimmsPerChannel + +#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \ + PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel + +#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \ + PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket + +#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \ + PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \ + BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24) + +#define DRAM_TECHNOLOGY(SocketID, MemTechType) \ + PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24) + +#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed + +#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \ + Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \ + Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8) + +#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \ + PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \ + PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \ + PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE + +#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \ + PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth + +#define MEMORY_POWER_POLICY_OVERRIDE(PowerPolicy) \ + PSO_MEMORY_POWER_POLICY, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, PowerPolicy + +#define MOTHER_BOARD_LAYERS(Layers) \ + PSO_MOTHER_BOARD_LAYERS, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, Layers + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CONDITION_AND \ + PSO_CONDITION_AND, 0 + +#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \ + PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk + +#define COND_SPD(Byte, Mask, Value) \ + PSO_CONDITION_SPD, 3, Byte, Mask, Value + +#define COND_REG(Access, Offset, Mask, Value) \ + PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \ + ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \ + ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF) + +#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \ + PSO_ACTION_ODT, 9, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \ + Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt + +#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \ + PSO_ACTION_ADDRTMG, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF) + +#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \ + PSO_ACTION_ODCCONTROL, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF) + +#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \ + PSO_ACTION_SLEWRATE, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF) + +#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \ + PSO_ACTION_SPEEDLIMIT, 9, \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \ + (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \ + (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \ + (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF) + +/*---------------------------------------------------------------------------------------- + * END OF CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ +/// Configuration sub-descriptors +typedef enum { + CONFIG_GENERAL, ///< CONFIG_GENERAL + CONFIG_SPEEDLIMIT, ///< CONFIG_SPEEDLIMIT + CONFIG_RC2IBT, ///< CONFIG_RC2IBT + CONFIG_DONT_CARE, ///< CONFIG_DONT_CARE +} Config_Type; + +// ==================== +// Configuration Macros +// ==================== +#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \ + PSO_TBLDRV_CONFIG, 9, \ + CONFIG_GENERAL, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF) + +#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \ + PSO_TBLDRV_CONFIG, 7, \ + CONFIG_SPEEDLIMIT, \ + DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm + +#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \ + PSO_TBLDRV_CONFIG, 10, \ + CONFIG_RC2IBT, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + NumOfReg + +//================== +// Overriding Macros +//================== +#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \ + PSO_TBLDRV_SPEEDLIMIT, 6, \ + (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \ + (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \ + (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \ + PSO_TBLDRV_ODT_RTTNOM, 2, \ + TgtCS, RttNom + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \ + PSO_TBLDRV_ODT_RTTWR, 2, \ + TgtCS, RttWr + +#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \ + PSO_TBLDRV_ODTPATTERN, 16, \ + ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \ + ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \ + ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \ + ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \ + PSO_TBLDRV_ADDRTMG, 4, \ + ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \ + PSO_TBLDRV_ODCCTRL, 4, \ + ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \ + PSO_TBLDRV_SLOWACCMODE, 1, \ + SlowAccMode + +#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \ + PSO_TBLDRV_RC2_IBT, 2, \ + TgtDimm, IBT + +#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_CL, 3, \ + RegValOfTcl, MR0CL13, MR0CL0 + +#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_WR, 2, \ + RegValOfTwr, MR0WR + +#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_RC10_OPSPEED, 5, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + MR10OPSPEED + +#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \ + PSO_TBLDRV_LRDIMM_IBT, 4, \ + F0RC8, F1RC0, F1RC1, F1RC2 + +#define TBLDRV_CONFIG_ENTRY_2D_TRAINING(Training2dMode) \ + PSO_TBLDRV_2D_TRAINING, 1, \ + Training2dMode + +//============================ +// Macros for removing entries +//============================ +#define INVALID_CONFIG_FLAG 0x8000 + +#define TBLDRV_INVALID_CONFIG \ + PSO_TBLDRV_INVALID_TYPE, 0 + +/*---------------------------------------------------------------------------------------- + * END OF TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ + +#endif // _PLATFORM_MEMORY_CONFIGURATION_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Include/Topology.h b/src/vendorcode/amd/pi/00630F01/Include/Topology.h new file mode 100644 index 0000000000..489248b0a1 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Include/Topology.h @@ -0,0 +1,86 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Topology interface definitions. + * + * Contains AMD AGESA internal interface for topology related data which + * is consumed by code other than Topology Services init. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _TOPOLOGY_H_ +#define _TOPOLOGY_H_ + +// Defines for limiting data structure maximum allocation and limit checking. +#define MAX_NODES 1 +#define MAX_SOCKETS MAX_NODES +#define MAX_DIES 1 + +/** + * Socket and Module to Node Map Item. + * Provide the Node Id and core id range for each module in each processor. + */ +typedef struct { + UINT8 Node; ///< The module's Node id. + UINT8 LowCore; ///< The lowest processor core id for this module. + UINT8 HighCore; ///< The highest processor core id for this module. + UINT8 EnabledComputeUnits; ///< The value of Enabled for this processor module. + UINT8 DualCoreComputeUnits; ///< The value of DualCore for this processor module. + UINT8 TripleCoreComputeUnits;///< The value of TripleCore for this processor module. + UINT8 QuadCoreComputeUnits; ///< The value of QuadCore for this processor module. +} SOCKET_DIE_TO_NODE_ITEM; + +/** + * Socket and Module to Node Map. + * This type is a pointer to the actual map, it can be used for a struct item or + * for typecasting a heap buffer pointer. + */ +typedef SOCKET_DIE_TO_NODE_ITEM (*SOCKET_DIE_TO_NODE_MAP)[MAX_SOCKETS][MAX_DIES]; + +/** + * Node id to Socket Die Map Item. + */ +typedef struct { + UINT8 Socket; ///< socket of the processor containing the Node. + UINT8 Die; ///< the module in the processor which is Node. +} NODE_TO_SOCKET_DIE_ITEM; + +/** + * Node id to Socket Die Map. + */ +typedef NODE_TO_SOCKET_DIE_ITEM (*NODE_TO_SOCKET_DIE_MAP)[MAX_NODES]; + +#endif // _TOPOLOGY_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Porting.h b/src/vendorcode/amd/pi/00630F01/Porting.h new file mode 100644 index 0000000000..9bafee1fc1 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Porting.h @@ -0,0 +1,299 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Describes compiler dependencies - to support several compile time environments + * + * Contains compiler environment porting descriptions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Includes + * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 03:16:51 -0600 (Wed, 22 Dec 2010) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * 2013 - 2014, Sage Electronic Engineering, LLC + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PORTING_H_ +#define _PORTING_H_ + +#if defined (_MSC_VER) + #pragma warning(push) + #pragma warning(disable: 4103 4001 4733) + // ----------------------------------------------------------------------- + // Define a code_seg MACRO + // + #define MAKE_AS_A_STRING(arg) #arg + + #define CODE_GROUP(arg) __pragma (code_seg (MAKE_AS_A_STRING (.t##arg))) + + #define RDATA_GROUP(arg) __pragma (const_seg (MAKE_AS_A_STRING (.d##arg))) + #define FUNC_ATTRIBUTE(arg) __declspec(arg) + //#include <intrin.h> // MS has built-in functions + + #if _MSC_VER < 900 + // ----------------------------------------------------------------------- + // Assume MSVC 1.52C (16-bit) + // + // NOTE: When using MSVC 1.52C use the following command line: + // + // CL.EXE /G3 /AL /O1i /Fa <FILENAME.C> + // + // This will produce 32-bit code in USE16 segment that is optimized for code + // size. + typedef void VOID; + + // Create the universal 32, 16, and 8-bit data types + typedef unsigned long UINTN; + typedef long INT32; + typedef unsigned long UINT32; + typedef int INT16; + typedef unsigned int UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + /// struct for 16-bit environment handling of 64-bit value + typedef struct _UINT64 { + IN OUT UINT32 lo; ///< lower 32-bits of 64-bit value + IN OUT UINT32 hi; ///< highest 32-bits of 64-bit value + } UINT64; + + // Create the Boolean type + #define TRUE 1 + #define FALSE 0 + typedef unsigned char BOOLEAN; + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV __pascal + #define ROMDATA __based( __segname( "_CODE" ) ) + #define _16BYTE_ALIGN __declspec(align(16)) + #define _8BYTE_ALIGN + #define _4BYTE_ALIGN + #define _2BYTE_ALIGN + #define _1BYTE_ALIGN + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma warning( disable : 4103 ) // Disable '#pragma pack' in .h warning + #pragma pack(1) + + // Disable WORD->BYTE automatic conversion warnings. Example: + // BYTE LocalByte; + // void MyFunc(BYTE val); + // + // MyFunc(LocalByte*2+1); // Warning, automatic conversion + // + // The problem is any time math is performed on a BYTE, it is converted to a + // WORD by MSVC 1.52c, and then when it is converted back to a BYTE, a warning + // is generated. Disable warning C4761 + #pragma warning( disable : 4761 ) + + #else + // ----------------------------------------------------------------------- + // Assume a 32-bit MSVC++ + // + // Disable the following warnings: + // 4100 - 'identifier' : unreferenced formal parameter + // 4276 - 'function' : no prototype provided; assumed no parameters + // 4214 - non standard extension used : bit field types other than int + // 4001 - nonstandard extension 'single line comment' was used + // 4142 - benign redefinition of type for following declaration + // - typedef char INT8 + #if defined (_M_IX86) + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __w64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #define _16BYTE_ALIGN __declspec(align(64)) + #define _8BYTE_ALIGN + #define _4BYTE_ALIGN + #define _2BYTE_ALIGN + #define _1BYTE_ALIGN + #if _MSC_VER >= 1400 + #define VA_ARGS_SUPPORTED + #endif + // 64 bit of compiler + #else + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306 4366) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __int64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + #define _8BYTE_ALIGN + #define _4BYTE_ALIGN + #define _2BYTE_ALIGN + #define _1BYTE_ALIGN + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #endif + #endif + // ----------------------------------------------------------------------- + // End of MS compiler versions + +#elif defined __GNUC__ + + #define IN + #define OUT + #define STATIC static + #define VOLATILE volatile + #define TRUE 1 + #define FALSE 0 +// #undef CONST + #define CONST const + #define ROMDATA + #define CALLCONV + #define _16BYTE_ALIGN __attribute__ ((aligned (16))) + #define _8BYTE_ALIGN __attribute__ ((aligned (8))) + #define _4BYTE_ALIGN __attribute__ ((aligned (4))) + #define _2BYTE_ALIGN __attribute__ ((aligned (2))) + #define _1BYTE_ALIGN __attribute__ ((aligned (1))) + + typedef unsigned char BOOLEAN; + typedef signed char INT8; + typedef signed short INT16; + typedef signed long INT32; + typedef signed long long INT64; + typedef char CHAR8; + typedef unsigned char UINT8; + typedef unsigned short UINT16; + typedef unsigned long UINT32; + typedef unsigned long UINTN; + typedef unsigned long long UINT64; + typedef void VOID; + //typedef unsigned long size_t; + //typedef unsigned int uintptr_t; + #define CODE_GROUP(arg) + #define RDATA_GROUP(arg) + + //#include <intrin.h> // MingW-w64 library header + //#include <MyIntrinsics.h> // AGESA temp file for GCC until support is added to MinGW + +#pragma pack(1) + +#define FUNC_ATTRIBUTE(arg) __attribute__((arg)) +#define MAKE_AS_A_STRING(arg) #arg +#include <stddef.h> +#include <gcc-intrin.h> + +#include <assert.h> +#include <console/console.h> +#include <console/loglevel.h> + +#ifndef NULL + #define NULL ((void *)0) +#endif + +#else + // ----------------------------------------------------------------------- + // Unknown or unsupported compiler + // + #error "Unknown compiler in use" +#endif + +// ----------------------------------------------------------------------- +// Common definitions for all compilers +// + +//Support forward reference construct +#define AGESA_FORWARD_DECLARATION(x) typedef struct _##x x + +// The following are use in conformance to the UEFI style guide +#define IN +#define OUT + +#endif // _PORTING_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/Family/cpuFamRegisters.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/Family/cpuFamRegisters.h new file mode 100644 index 0000000000..b93d396747 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/Family/cpuFamRegisters.h @@ -0,0 +1,110 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_FAM_REGISTERS_H_ +#define _CPU_FAM_REGISTERS_H_ + +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +// This define should be equal to the total number of families +// in the cpuFamily enum. +#define MAX_CPU_FAMILIES 64 +#define MAX_CPU_REVISIONS 63 // Max Cpu Revisions Per Family + +// CPU_LOGICAL_ID.Family equates +// Family 15h equates +#define AMD_FAMILY_15_TN 0x0000000000000200ull +#define AMD_FAMILY_TN (AMD_FAMILY_15_TN) +#define AMD_FAMILY_15_RL (AMD_FAMILY_15_TN) +#define AMD_FAMILY_RL (AMD_FAMILY_15_TN) +#define AMD_FAMILY_15_KV 0x0000000000000400ull +#define AMD_FAMILY_KV (AMD_FAMILY_15_KV) +#define AMD_FAMILY_15 (AMD_FAMILY_15_TN | AMD_FAMILY_15_KV) + +// Family Unknown +#define AMD_FAMILY_UNKNOWN 0x8000000000000000ull + + +// Family 15h CPU_LOGICAL_ID.Revision equates +// ------------------------------------- + + // Family 15h TN steppings +#define AMD_F15_TN_A0 0x0000000000000100ull +#define AMD_F15_TN_A1 0x0000000000000200ull +#define AMD_F15_RL_A1 0x0000000000000400ull + // Family 15h KV steppings +#define AMD_F15_KV_A0 0x0000000000100000ull +#define AMD_F15_KV_A1 0x0000000000200000ull + // Family 15h Unknown stepping +#define AMD_F15_UNKNOWN 0x8000000000000000ull + +#define AMD_F15_RL_Ax (AMD_F15_RL_A1) +#define AMD_F15_RL_ALL (AMD_F15_RL_Ax) + +#define AMD_F15_TN_Ax (AMD_F15_TN_A0 | AMD_F15_TN_A1) +#define AMD_F15_TN_GT_A0 (AMD_F15_TN_ALL & ~AMD_F15_TN_A0) +#define AMD_F15_TN_ONLY (AMD_F15_TN_Ax) +#define AMD_F15_TN_ALL (AMD_F15_TN_Ax | AMD_F15_RL_ALL) + +#define AMD_F15_KV_Ax (AMD_F15_KV_A0 | AMD_F15_KV_A1) +#define AMD_F15_KV_ALL (AMD_F15_KV_Ax) + +#define AMD_F15_ALL (AMD_F15_TN_ALL | AMD_F15_KV_ALL) + +#endif // _CPU_FAM_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/Feature/cpuCacheInit.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/Feature/cpuCacheInit.h new file mode 100644 index 0000000000..f35315753f --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/Feature/cpuCacheInit.h @@ -0,0 +1,138 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Execution Cache Allocation functions. + * + * Contains code for doing Execution Cache Allocation for ROM space + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 192403 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_CACHE_INIT_H_ +#define _CPU_CACHE_INIT_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define BSP_STACK_SIZE_64K 65536 +#define BSP_STACK_SIZE_32K 32768 + +#define CORE0_STACK_SIZE 16384 +#define CORE1_STACK_SIZE 4096 + +#define AMD_MTRR_FIX4K_BASE 0x268 +#define AMD_MTRR_VARIABLE_BASE6 0x20C +#define AMD_MTRR_VARIABLE_BASE7 0x20E + +#define WP_IO 0x0505050505050505ull + +#define AGESA_CACHE_SIZE_REDUCED 1 +#define AGESA_CACHE_REGIONS_ACROSS_1MB 2 +#define AGESA_CACHE_REGIONS_ACROSS_4GB 3 +#define AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 4 +#define AGESA_CACHE_START_ADDRESS_LESS_D0000 5 +#define AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 6 +#define AGESA_DEALLOCATE_CACHE_REGIONS 7 + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ +/// Cache-As-Ram Executable region allocation modes +typedef enum { + LimitedByL2Size, ///< Execution space must be allocated from L2 + InfiniteExe, ///< Family can support unlimited Execution space + MaxCarExeMode ///< Used as limit or bounds check +} CAR_EXE_MODE; + +/// Cache Information +typedef struct { + IN UINT32 BspStackSize; ///< Stack size of BSP + IN UINT32 Core0StackSize; ///< Stack size of primary cores + IN UINT32 Core1StackSize; ///< Stack size of all non primary cores + IN UINT32 MemTrainingBufferSize; ///< Memory training buffer size + IN UINT32 SharedMemSize; ///< Shared memory size + IN UINT64 VariableMtrrMask; ///< Mask to apply before variable MTRR writes + IN UINT64 VariableMtrrHeapMask; ///< Mask to apply before variable MTRR writes for use in heap init. + IN UINT64 HeapBaseMask; ///< Mask used for the heap MTRR settings + IN CAR_EXE_MODE CarExeType; ///< Indicates which algorithm to use when allocating EXE space +} CACHE_INFO; + +/// Merged memory region overlap type +typedef enum { + EmptySet, ///< One of the regions is zero length + Disjoint, ///< The two regions do not touch + Adjacent, ///< one region is next to the other, no gap + CommonEnd, ///< regions overlap with a common end point + Extending, ///< the 2nd region is extending the size of the 1st + Contained, ///< the 2nd region is wholely contained inside the 1st + CommonStartContained, ///< the 2nd region is contained in the 1st with a common start + Identity, ///< the two regions are the same + CommonStartExtending, ///< the 2nd region has same start as 1st, but is larger size + NotCombinable ///< the combined regions do not follow the cache block rules +} OVERLAP_TYPE; + +/// Result of merging two memory regions for cache coverage +typedef struct { + IN OUT UINT32 MergedStartAddr; ///< Start address of the merged regions + IN OUT UINT32 MergedSize; ///< Size of the merged regions + OUT UINT32 OverlapAmount; ///< the size of the overlapping section + OUT OVERLAP_TYPE OverlapType; ///< indicates how the two regions overlap +} MERGED_CACHE_REGION; + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ +AGESA_STATUS +AllocateExecutionCache ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr + ); + +#endif // _CPU_CACHE_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuApicUtilities.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuApicUtilities.h new file mode 100644 index 0000000000..ec4ad284c1 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuApicUtilities.h @@ -0,0 +1,303 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU APIC related utility functions and structures + * + * Contains code that provides mechanism to invoke and control APIC communication. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_APIC_UTILITIES_H_ +#define _CPU_APIC_UTILITIES_H_ + + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +#define APIC_CTRL_DWORD 0xF +#define APIC_CTRL_REG (APIC_CTRL_DWORD << 4) +#define APIC_CTRL_MASK 0xFF +#define APIC_CTRL_SHIFT 0 + +#define APIC_DATA_DWORD 0x38 +#define APIC_DATA_REG (APIC_DATA_DWORD << 4) + +#define APIC_REMOTE_READ_REG 0xC0 +#define APIC_CMD_LO_REG 0x300 +#define APIC_CMD_HI_REG 0x310 + +// APIC_CMD_LO_REG bits +#define CMD_REG_DELIVERY_STATUS 0x1000 +#define CMD_REG_TO_READ 0x300 +#define CMD_REG_REMOTE_RD_STS_MSK 0x30000ul +#define CMD_REG_REMOTE_DELIVERY_PENDING 0x10000ul +#define CMD_REG_REMOTE_DELIVERY_DONE 0x20000ul +#define CMD_REG_TO_NMI 0x400 + +// ExeFlags bits +#define WAIT_FOR_CORE 0x00000001ul +#define TASK_HAS_OUTPUT 0x00000002ul +#define RETURN_PARAMS 0x00000004ul +#define END_AT_HLT 0x00000008ul +#define PASS_EARLY_PARAMS 0x00000010ul + +// Control Byte Values +// bit 7 indicates the type of message +// 1 - control message +// 0 - launch + APIC ID = message to go +// +#define CORE_UNAVAILABLE 0xFF +#define CORE_IDLE 0xFE +#define CORE_IDLE_HLT 0xFD +#define CORE_ACTIVE 0xFC +#define CORE_NEEDS_PTR 0xFB +#define CORE_NEEDS_DATA_SIZE 0xFA +#define CORE_STS_DATA_READY_1 0xF9 +#define CORE_STS_DATA_READY_0 0xF8 +#define CORE_DATA_FLAGS_READY 0xF7 +#define CORE_DATA_FLAGS_ACKNOWLEDGE 0xF6 +#define CORE_DATA_PTR_READY 0xF5 + +// Macro used to determine the number of dwords to transmit to the AP as input +#define SIZE_IN_DWORDS(sInput) ((UINT32) (((sizeof (sInput)) + 3) >> 2)) + +// IDT table +#define IDT_DESC_PRESENT 0x80 + +#define IDT_DESC_TYPE_LDT 0x02 +#define IDT_DESC_TYPE_CALL16 0x04 +#define IDT_DESC_TYPE_TASK 0x05 +#define IDT_DESC_TYPE_INT16 0x06 +#define IDT_DESC_TYPE_TRAP16 0x07 +#define IDT_DESC_TYPE_CALL32 0x0C +#define IDT_DESC_TYPE_INT32 0x0E +#define IDT_DESC_TYPE_TRAP32 0x0F +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +typedef VOID (*PF_AP_TASK) (AMD_CONFIG_PARAMS *StdHeader); +typedef VOID (*PF_AP_TASK_I) (VOID *, AMD_CONFIG_PARAMS *StdHeader); +typedef VOID (*PF_AP_TASK_C) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef VOID (*PF_AP_TASK_IC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef UINT32 (*PF_AP_TASK_O) (AMD_CONFIG_PARAMS *StdHeader); +typedef UINT32 (*PF_AP_TASK_IO) (VOID *, AMD_CONFIG_PARAMS *StdHeader); +typedef UINT32 (*PF_AP_TASK_OC) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef UINT32 (*PF_AP_TASK_IOC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); + +/// Function pointer union representing the eight different +/// types of functions that an AP can be asked to perform. +typedef union { + PF_AP_TASK PfApTask; ///< AMD_CONFIG_PARAMS * input with no output + PF_AP_TASK_I PfApTaskI; ///< VOID * + AMD_CONFIG_PARAMS * input with no output + PF_AP_TASK_C PfApTaskC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output + PF_AP_TASK_IC PfApTaskIC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output + PF_AP_TASK_O PfApTaskO; ///< AMD_CONFIG_PARAMS * input with UINT32 output + PF_AP_TASK_IO PfApTaskIO; ///< VOID * + AMD_CONFIG_PARAMS * input with UINT32 output + PF_AP_TASK_OC PfApTaskOC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output + PF_AP_TASK_IOC PfApTaskIOC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output +} AP_FUNCTION_PTR; + +/// Input structure for ApUtilTransmitBuffer and ApUtilReceiveBuffer +/// containing information about the data transfer from one core +/// to another. +typedef struct { + IN OUT UINT16 DataSizeInDwords; ///< Size of the data to be transferred rounded up to the nearest dword + IN OUT VOID *DataPtr; ///< Pointer to the data + IN UINT32 DataTransferFlags; ///< Flags dictating certain aspects of the data transfer +} AP_DATA_TRANSFER; + +/// Input structure for ApUtilRunCodeOnSocketCore. +typedef struct _AP_TASK { + AP_FUNCTION_PTR FuncAddress; ///< Pointer to the function that the AP will run + AP_DATA_TRANSFER DataTransfer; ///< Data transfer struct for optionally passing data that the AP should use as input to the function + UINT32 ExeFlags; ///< Flags dictating certain aspects of the AP tasking sequence +} AP_TASK; + +/// Input structure for ApUtilWaitForCoreStatus. +typedef struct { + IN UINT8 *Status; ///< Pointer to the 1st element of an array of values to wait for + IN UINT8 NumberOfElements; ///< Number of elements in the array + IN UINT32 RetryCount; ///< Number of remote read cycles to complete before quitting + IN UINT32 WaitForStatusFlags; ///< Flags dictating certain aspects of ApUtilWaitForCoreStatus +} AP_WAIT_FOR_STATUS; + +/// Interrupt Descriptor Table entry +typedef struct { + UINT16 OffsetLo; ///< Lower 16 bits of the interrupt handler routine's offset + UINT16 Selector; ///< Interrupt handler routine's selector + UINT8 Rsvd; ///< Reserved + UINT8 Flags; ///< Interrupt flags + UINT16 OffsetHi; ///< Upper 16 bits of the interrupt handler routine's offset + UINT32 Offset64; ///< High order 32 bits of the handler's offset needed when in 64 bit mode + UINT32 Rsvd64; ///< Reserved +} IDT_DESCRIPTOR; + +/// Structure needed to load the IDTR using the lidt instruction +typedef struct { + UINT16 Limit; ///< Interrupt Descriptor Table size + UINT64 Base; ///< Interrupt Descriptor Table base address +} IDT_BASE_LIMIT; + +#define WAIT_STATUS_EQUALITY 0x00000001ul +#define WAIT_INFINITELY 0 + +// Data Transfer Flags +#define DATA_IN_MEMORY 0x00000001ul + + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ +// These are P U B L I C functions, used by AGESA +UINT8 +ApUtilReadRemoteControlByte ( + IN UINT32 TargetApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilWriteControlByte ( + IN UINT8 Value, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT32 +ApUtilReadRemoteDataDword ( + IN UINT32 TargetApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilWriteDataDword ( + IN UINT32 Value, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT32 +ApUtilRunCodeOnSocketCore ( + IN UINT8 Socket, + IN UINT8 Core, + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT8 +ApUtilWaitForCoreStatus ( + IN UINT32 TargetApicId, + IN AP_WAIT_FOR_STATUS *WaitParamsPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApEntry ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams + ); + +UINT32 +ApUtilTaskOnExecutingCore ( + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader, + IN VOID *ConfigParams + ); + +VOID +ApUtilTransmitBuffer ( + IN UINT8 Socket, + IN UINT8 Core, + IN AP_DATA_TRANSFER *BufferInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +ApUtilReceiveBuffer ( + IN UINT8 Socket, + IN UINT8 Core, + IN OUT AP_DATA_TRANSFER *BufferInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetLocalApicIdForCore ( + IN UINT32 TargetSocket, + IN UINT32 TargetCore, + OUT UINT32 *LocalApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilRunCodeOnAllLocalCoresAtEarly ( + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr + ); + +VOID +RelinquishControlOfAllAPs ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetCsSelector ( + IN UINT16 *Selector, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +SetIdtr ( + IN IDT_BASE_LIMIT *IdtInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetIdtr ( + IN IDT_BASE_LIMIT *IdtInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif /* _CPU_APIC_UTILITIES_H_ */ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuEarlyInit.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuEarlyInit.h new file mode 100644 index 0000000000..6512a21d52 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuEarlyInit.h @@ -0,0 +1,290 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Reset API, and related functions and structures. + * + * Contains code that initialized the CPU after early reset. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_EARLY_INIT_H_ +#define _CPU_EARLY_INIT_H_ + + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ +AGESA_FORWARD_DECLARATION (CPU_CORE_LEVELING_FAMILY_SERVICES); + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +#define CPU_BRAND_ID_LENGTH 48 // Total number of characters supported +#define LOW_NODE_DEVICEID 24 +#define NB_CAPABILITIES 0xE8 //Function 3 Registers +//---------------------------------------------------------------------------- +// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/* All lengths are in bytes */ +#define MICROCODE_TRIADE_SIZE 28 +#define MICROCODE_HEADER_LENGTH 64 + +/** + * @page ucodeflag Microcode Patches Signature Guide + * + * We mark patches in the ROM with a signature so that they can be easily found + * + * @anchor Microcode Patch Signature + * @li @e Microcode Patch Signature @n + * Microcode patches are marked by adding a signature before patches in the ROM image to + * help identify where they are located. + * There're two kind of signatures. One is '$UCODE2K', it indicates there's a following patch with 2K size. + * The other is '$UCODE4K', it indicates there's a following patch with 4K size. + * If you want to know the patch level / equivalent ID, please consult the BKDG for patch header format. + * + * + */ +/// Microcode patch flag for replacement +typedef struct { + IN UINT8 MicrocodePatchesFlag[8]; ///< a flag followed by microcode +} MICROCODE_PATCHES_FLAG; + +#define UCODE_2K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '2', 'K'}}; +#define UCODE_4K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '4', 'K'}}; +#define UCODE_VS_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', 'V', 'S'}}; + +/* Offsets in UCODE PATCH Header */ +/* Note: Header is 64 bytes */ +#define DATE_CODE_OFFSET 0 // 4 bytes +#define PATCH_ID 4 // 4 bytes +#define MICROCODE_PATH_DATA_ID 8 // 2 bytes +#define MICROCODE_PATCH_DATA_LENGTH 10 // 1 byte +#define MICROCODE_PATCH_DATA_CHECKSUM 12 // 4 bytes +#define CHIPSET_1_DEVICE_ID 16 // 4 bytes +#define CHIPSET_2_DEVICE_ID 20 // 4 bytes +#define PROCESSOR_REV_ID 24 // 2 bytes +#define CHIPSET_1_REV_ID 26 // 1 byte +#define CHIPSET_2_REV_ID 27 // 1 byte + +#define MICROCODE_PATCH_2K_SIZE 2048 +#define MICROCODE_PATCH_4K_SIZE 4096 +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// A structure representing BrandId[15:0] from +/// CPUID Fn8000_0001_EBX +typedef struct { + UINT8 String1:4; ///< An index to a string value used to create the name string + UINT8 String2:4; ///< An index to a string value used to create the name string + UINT8 Page:1; ///< An index to the appropriate page for the String1, String2, and Model values + UINT8 Model:7; ///< A field used to create the model number in the name string + UINT8 Socket:4; ///< Specifies the package type + UINT8 Cores:4; ///< Identifies how many physical cores are present +} AMD_CPU_BRAND_DATA; + +/// A structure containing string1 and string2 values +/// as well as information pertaining to their usage +typedef struct { + IN UINT8 Cores; ///< Appropriate number of physical cores + IN UINT8 Page; ///< This string's page number + IN UINT8 Index; ///< String index + IN UINT8 Socket; ///< Package type information + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 Stringlength; ///< Number of characters in the string +} AMD_CPU_BRAND; + +/// An entire CPU brand table. +typedef struct { + UINT8 NumberOfEntries; ///< The number of entries in the table. + CONST AMD_CPU_BRAND *Table; ///< The table entries. +} CPU_BRAND_TABLE; + +//---------------------------------------------------------------------------- +// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Microcode patch field definitions +typedef struct { + UINT32 DateCode; ///< Date of patch creation + UINT32 PatchID; ///< Patch level + UINT16 MicrocodePatchDataID; ///< Internal use only + UINT8 MicrocodePatchDataLength; ///< Internal use only + UINT8 InitializationFlag; ///< Internal use only + UINT32 MicrocodePatchDataChecksum; ///< Doubleword sum of data block + UINT32 Chipset1DeviceID; ///< Device ID of 1st Chipset device to match + UINT32 Chipset2DeviceID; ///< Device ID of 2nd Chipset device to match + UINT16 ProcessorRevisionID; ///< Equivalent ID + UINT8 Chipset1RevisionID; ///< Revision level of 1st Chipset device to match + UINT8 Chipset2RevisionID; ///< Revision level of 2nd Chipset device to match + UINT8 BiosApiRevision; ///< BIOS INT 15 API revision required + UINT8 Reserved1[3]; ///< Reserved + UINT32 MatchRegister0; ///< Internal use only + UINT32 MatchRegister1; ///< Internal use only + UINT32 MatchRegister2; ///< Internal use only + UINT32 MatchRegister3; ///< Internal use only + UINT32 MatchRegister4; ///< Internal use only + UINT32 MatchRegister5; ///< Internal use only + UINT32 MatchRegister6; ///< Internal use only + UINT32 MatchRegister7; ///< Internal use only + UINT8 PatchDataBlock[896]; ///< Raw patch data + UINT8 Reserved2[896]; ///< Reserved + UINT8 X86CodePresent; ///< Boolean to determine if executable code exists + UINT8 X86CodeEntry[191]; ///< Code to execute if X86CodePresent != 0 +} MICROCODE_PATCH; + +/// Two kilobyte array containing the raw +/// microcode patch binary data +typedef struct { + IN UINT8 MicrocodePatches[MICROCODE_PATCH_2K_SIZE]; ///< 2k UINT8 elements +} MICROCODE_PATCHES; + +/// Four kilobyte array containing the raw +/// microcode patch binary data +typedef struct { + IN UINT8 MicrocodePatches[MICROCODE_PATCH_4K_SIZE]; ///< 4k UINT8 elements +} MICROCODE_PATCHES_4K; + +/** + * Set down core register + * + * @CpuServiceInstances + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] Socket Socket ID. + * @param[in] Module Module ID in socket. + * @param[in] LeveledCores Number of core. + * @param[in] CoreLevelMode Core level mode. + * @param[in] StdHeader Header for library and services. + * + * @retval TRUE Down Core register is updated. + * @retval FALSE Down Core register is not updated. + */ +typedef BOOLEAN (F_CPU_SET_DOWN_CORE_REGISTER) ( + IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices, + IN UINT32 *Socket, + IN UINT32 *Module, + IN UINT32 *LeveledCores, + IN CORE_LEVELING_TYPE CoreLevelMode, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Reference to a method +typedef F_CPU_SET_DOWN_CORE_REGISTER *PF_CPU_SET_DOWN_CORE_REGISTER; + +/** + * Provide the interface to the Core Leveling Family Specific Services. + * + * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!). + * Each supported Family must provide an implementation for all methods in this interface, even if the + * implementation is a CommonReturn(). + */ +struct _CPU_CORE_LEVELING_FAMILY_SERVICES { // See Forward Declaration above + UINT16 Revision; ///< Interface version + // Public Methods. + PF_CPU_SET_DOWN_CORE_REGISTER SetDownCoreRegister; ///< Method: Set down core register. +}; + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +// These are P U B L I C functions, used by IBVs +AGESA_STATUS +AmdCpuEarly ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +// These are P U B L I C functions, used by AGESA +AGESA_STATUS +PmInitializationAtEarly ( + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +LoadMicrocodePatch ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +GetPatchEquivalentId ( + IN OUT UINT16 *ProcessorEquivalentId, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +ValidateMicrocode ( + IN MICROCODE_PATCH *MicrocodePatchPtr, + IN UINT16 ProcessorEquivalentId, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetMicrocodeVersion ( + OUT UINT32 *pMicrocodeVersion, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdCpuEarlyInitializer ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr + ); + +VOID +McaInitialization ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif // _CPU_EARLY_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuLateInit.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuLateInit.h new file mode 100644 index 0000000000..844b343973 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuLateInit.h @@ -0,0 +1,1141 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Late Init API functions Prototypes. + * + * Contains code for doing any late CPU initialization + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_LATE_INIT_H_ +#define _CPU_LATE_INIT_H_ + +#include "Filecode.h" + +// Forward declaration needed for multi-structure mutual references. +AGESA_FORWARD_DECLARATION (PROC_FAMILY_TABLE); +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +//---------------------------------------------------------------------------- +// DMI DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AP_LATE_TASK_GET_TYPE4_TYPE7 (PROC_CPU_FEATURE_CPUDMI_FILECODE) +// SMBIOS constant definition +#define CENTRAL_PROCESSOR 0x03 +#define EXTERNAL_CLOCK_DFLT 200 +#define EXTERNAL_CLOCK_100MHZ 100 +#define P_FAMILY_UNKNOWN 0x02 +#define P_ENGINEERING_SAMPLE 0x00 +#define P_CHARACTERISTICS 0x4 +#define CACHE_CFG_L1 0x180 +#define CACHE_CFG_L2 0x181 +#define CACHE_CFG_L3 0x182 +#define SRAM_TYPE 0x10 +#define ERR_CORRECT_TYPE 0x06 +#define CACHE_TYPE 0x05 +#define DMI_ASSOCIATIVE_OTHER 0x01 +#define DMI_ASSOCIATIVE_UNKNOWN 0x02 +#define DMI_ASSOCIATIVE_DIRECT_MAPPED 0x03 +#define DMI_ASSOCIATIVE_2_WAY 0x04 +#define DMI_ASSOCIATIVE_4_WAY 0x05 +#define DMI_ASSOCIATIVE_FULLY 0x06 +#define DMI_ASSOCIATIVE_8_WAY 0x07 +#define DMI_ASSOCIATIVE_16_WAY 0x08 +#define DMI_ASSOCIATIVE_12_WAY 0x09 +#define DMI_ASSOCIATIVE_24_WAY 0x0A +#define DMI_ASSOCIATIVE_32_WAY 0x0B +#define DMI_ASSOCIATIVE_48_WAY 0x0C +#define DMI_ASSOCIATIVE_64_WAY 0x0D +#define DMI_ASSOCIATIVE_20_WAY 0x0E +#define SOCKET_POPULATED 0x40 +#define CPU_STATUS_UNKNOWN 0x00 +#define CPU_STATUS_ENABLED 0x01 + +// Processor Upgrade Definition +#define P_UPGRADE_UNKNOWN 0x02 +#define P_UPGRADE_NONE 0x06 +#define P_UPGRADE_S1GX 0x16 +#define P_UPGRADE_AM2 0x17 +#define P_UPGRADE_F1207 0x18 +#define P_UPGRADE_G34 0x1A +#define P_UPGRADE_AM3 0x1B +#define P_UPGRADE_C32 0x1C +#define P_UPGRADE_FS1 0x27 +#define P_UPGRADE_FM1 0x29 +#define P_UPGRADE_FM2 0x2A + +//---------------------------------------------------------------------------- +// SRAT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define NorthbridgeCapabilities 0xE8 +#define DRAMBase0 0x40 +#define MMIOBase0 0x80 +#define TOP_MEM 0xC001001Aul +#define LOW_NODE_DEVICEID 24 +#define LOW_APICID 0 + + +// Miscellaneous AMD related values +#define MAX_NUMBER_NODES 8 + +// Flags +#define ENABLED 1 // Bit 0 +#define DISABLED 0 // Bit 0 +#define HOTPLUGGABLE 2 // Bit 1 + +// Affinity Entry Structures +#define AE_APIC 0 +#define AE_MEMORY 1 + + +// Memory Types +#define TYPE_MEMORY 1 +#define TYPE_RESERVED 2 +#define TYPE_ACPI 3 +#define TYPE_NVS 4 + +//---------------------------------------------------------------------------- +// SLIT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AMD_ACPI_SLIT_SOCKET_NUM_LENGTH 8 + +//---------------------------------------------------------------------------- +// CDIT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH 4 // Num domains is a 4-bytes unsigned integer + + +//---------------------------------------------------------------------------- +// P-STATE DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +//------------------------------------- +// ERROR Codes +//------------------------------------- +#define NO_ERROR 0x0 +#define USER_DISABLE_ERROR 0x01 // User disabled SSDT generation +#define CORES_MISSMATCH_PSS_ERROR 0x02 // No PSS match +#define PNOW_SUPPORT_ERROR 0x04 // One of the Cores do not support PNOW! +#define PWR_FREQ_MATCH_ERROR 0x08 // FREQ and PWR mismatch +#define NO_PSS_SIZE_ERROR 0x10 // Error in PSS Size +#define INVALID_PSTATE_ERROR 0x20 // Invalid Max or only 1 P-State available +#define NO_PSS_ENTRY 0x0FFFFul +#define INVALID_FREQ 0x0FFFFFFFFul + +//------------------------- +// Default definitions +// AMD BKDG default values +//------------------------- +#define DEFAULT_ISOCH_RELIEF_TIME IRT_80uS +#define DEFAULT_RAMP_VOLTAGE_OFFSET RVO_50mV +#define DEFAULT_MAX_VOLTAGE_STEP MVS_25mV +#define DEFAULT_PERF_PRESENT_CAP 0 // default for Desktop +#define DEFAULT_VOLTAGE_STABLE_TIME (100 / 20) // 100uS +#define DEFAULT_PLL_LOCK_TIME 2 // 2uS +#define DEFAULT_TRANSITION_LATENCY 100 // 100uS +#define DEFAULT_BUS_MASTER_LATENCY 9 // 9uS +#define DEFAULT_CPU_SCOPE_NUMBER "0UPC" + +// Defines for Common ACPI +// ----------------------------- +#define SCOPE_OPCODE 0x10 +#define NAME_OPCODE 0x08 +#define METHOD_OPCODE 0x14 +#define PACKAGE_OPCODE 0x12 +#define BUFFER_OPCODE 0x11 +#define BYTE_PREFIX_OPCODE 0x0A +#define WORD_PREFIX_OPCODE 0x0B +#define DWORD_PREFIX_OPCODE 0x0C +#define RETURN_OPCODE 0xA4 +#define ACPI_BUFFER 0x080A0B11ul + +// Generic Register Descriptor (GDR) Fields +#define GDR_ASI_SYSTEM_IO 0x01 // Address Space ID +#define GDR_ASZ_BYTE_ACCESS 0x01 // Address Size + +// Defines for ACPI Scope Table +// ---------------------------- +#define SCOPE_LENGTH (SCOPE_STRUCT_SIZE + \ + PCT_STRUCT_SIZE + \ + PSS_HEADER_STRUCT_SIZE + \ + PSS_BODY_STRUCT_SIZE + \ + PPC_HEADER_BODY_STRUCT_SIZE) +#define SCOPE_VALUE1 0x5C +#define SCOPE_VALUE2 0x2E +#define SCOPE_NAME__ '_' +#define SCOPE_NAME_P 'P' +#define SCOPE_NAME_R 'R' +#define SCOPE_NAME_S 'S' +#define SCOPE_NAME_B 'B' +#define SCOPE_NAME_C 'C' +#define SCOPE_NAME_U 'U' +#define SCOPE_NAME_0 '0' +#define SCOPE_NAME_1 '1' +#define SCOPE_NAME_2 '2' +#define SCOPE_NAME_3 '3' +#define SCOPE_NAME_A 'A' + +#ifdef OEM_SCOPE_NAME + #if (OEM_SCOPE_NAME > 'Z') || (OEM_SCOPE_NAME < 'A') + #error "OEM_SCOPE_NAME: it should be only one char long AND a valid letter (A~Z)" + #endif + #define SCOPE_NAME_VALUE OEM_SCOPE_NAME +#else + #define SCOPE_NAME_VALUE SCOPE_NAME_C +#endif // OEM_SCOPE_NAME + +#ifdef OEM_SCOPE_NAME1 + #if (!(((OEM_SCOPE_NAME1 >= 'A') && (OEM_SCOPE_NAME1 <= 'Z')) || \ + ((OEM_SCOPE_NAME1 >= '0') && (OEM_SCOPE_NAME1 <= '9')) || \ + (OEM_SCOPE_NAME1 == '_'))) + #error "OEM_SCOPE_NAME1: it should be only one char long AND a valid letter (0~9, A~F)" + #endif + #define SCOPE_NAME_VALUE1 OEM_SCOPE_NAME1 +#else + #define SCOPE_NAME_VALUE1 SCOPE_NAME_0 +#endif // OEM_SCOPE_NAME + +// Defines for PCT Control and Status Table +// ---------------------------------------- +#define PCT_NAME__ '_' +#define PCT_NAME_P 'P' +#define PCT_NAME_C 'C' +#define PCT_NAME_T 'T' +#define PCT_VALUE1 0x11022C12ul +#define PCT_VALUE2 0x0A14 +#define PCT_VALUE3 0x11 +#define GENERIC_REG_DESCRIPTION 0x82 +#define PCT_LENGTH 0x0C +#define PCT_ADDRESS_SPACE_ID 0x7F +#define PCT_REGISTER_BIT_WIDTH 0x40 +#define PCT_REGISTER_BIT_OFFSET 0x00 +#define PCT_RESERVED 0x00 +#define PCT_CONTROL_REG_LO 0xC0010062ul +#define PCT_CONTROL_REG_HI 0x00 +#define PCT_VALUE4 0x14110079ul +#define PCT_VALUE5 0x110A +#define PCT_STATUS_REG_LO 0x00 +#define PCT_STATUS_REG_HI 0x00 +#define PCT_VALUE6 0x0079 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_NAME__ '_' +#define PSS_NAME_X 'X' +#define PSS_NAME_P 'P' +#define PSS_NAME_S 'S' +#define PSS_LENGTH (sizeof pssBodyStruct + 3) +#define NUM_OF_ITEMS_IN_PSS 0x00 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_PKG_LENGTH 0x20 // PSS_BODY_STRUCT_SIZE - 1 +#define PSS_NUM_OF_ELEMENTS 0x06 +#define PSS_FREQUENCY 0x00 +#define PSS_POWER 0x00 +#define PSS_TRANSITION_LATENCY DEFAULT_TRANSITION_LATENCY +#define PSS_BUS_MASTER_LATENCY DEFAULT_BUS_MASTER_LATENCY +#define PSS_CONTROL ((DEFAULT_ISOCH_RELIEF_TIME << 30) + \ + (DEFAULT_RAMP_VOLTAGE_OFFSET << 28) + \ + (DEFAULT_EXT_TYPE << 27) + \ + (DEFAULT_PLL_LOCK_TIME << 20) + \ + (DEFAULT_MAX_VOLTAGE_STEP << 18) + \ + (DEFAULT_VOLTAGE_STABLE_TIME << 11) + \ + (PSS_VID << 6) + PSS_FID) +#define PSS_STATUS (DEFAULT_EXTENDED_TYPE << 11) + (PSS_VID << 6) + (PSS_FID) + +// Defines for XPSS Header Table +// ---------------------------- +#define XPSS_PKG_LENGTH 0x47 // XPSS_BODY_STRUCT_SIZE - 1 +#define XPSS_NUM_OF_ELEMENTS 0x08 +#define XPSS_ACPI_BUFFER 0x080A0B11ul + + +// Defines for PPC Header Table +// ---------------------------- +#define PPC_NAME__ '_' +#define PPC_NAME_P 'P' +#define PPC_NAME_C 'C' +#define PPC_NAME_V 'V' +#define PPC_METHOD_FLAGS 0x00; +#define PPC_VALUE1 0x0A; + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_NAME__ '_' +#define PSD_NAME_P 'P' +#define PSD_NAME_S 'S' +#define PSD_NAME_D 'D' +#define PSD_HEADER_LENGTH (PSD_BODY_STRUCT_SIZE + 2) +#define PSD_VALUE1 0x01 + + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_PKG_LENGTH (PSD_BODY_STRUCT_SIZE - 1) +#define NUM_OF_ENTRIES 0x05 +#define PSD_NUM_OF_ENTRIES 0x05 +#define PSD_REVISION 0x00 +#define PSD_DEPENDENCY_DOMAIN 0x00 +#define PSD_COORDINATION_TYPE_HW_ALL 0xFE +#define PSD_COORDINATION_TYPE_SW_ANY 0xFD +#define PSD_COORDINATION_TYPE_SW_ALL 0xFC +#define PSD_NUM_OF_PROCESSORS 0x01 +#define PSD_TWO_CORES_PER_COMPUTE_UNIT 0x02 +#define PSD_THREE_CORES_PER_COMPUTE_UNIT 0x03 +#define PSD_FOUR_CORES_PER_COMPUTE_UNIT 0x04 + + +#define CUSTOM_PSTATE_FLAG 0x55 +#define PSTATE_FLAG_1 0x55 +#define TARGET_PSTATE_FLAG 0xAA +#define PSTATE_FLAG_2 0xAA + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// ACPI P-States AML TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +//-------------------------------------------- +// AML code definition +// (Scope) +//--------------------------------------------- +/// SCOPE +typedef struct _SCOPE { + UINT8 ScopeOpcode; ///< Opcode + UINT16 ScopeLength; ///< Scope Length + UINT8 ScopeValue1; ///< Value1 + UINT8 ScopeValue2; ///< Value2 + UINT8 ScopeNamePt1a__; ///< Name Pointer + UINT8 ScopeNamePt1a_P; ///< Name Pointer + UINT8 ScopeNamePt1a_R; ///< Name Pointer + UINT8 ScopeNamePt1b__; ///< Name Pointer + UINT8 ScopeNamePt2a_C; ///< Name Pointer + UINT8 ScopeNamePt2a_P; ///< Name Pointer + UINT8 ScopeNamePt2a_U; ///< Name Pointer + UINT8 ScopeNamePt2a_0; ///< Name Pointer +} SCOPE; +#define SCOPE_STRUCT_SIZE 13 // 13 Bytes + +//-------------------------------------------- +// AML code definition +// (PCT Header and Body) +//--------------------------------------------- + +///Performance Control Header +typedef struct _PCT_HEADER_BODY { + UINT8 NameOpcode; ///< Opcode + UINT8 PctName_a__; ///< String "_" + UINT8 PctName_a_P; ///< String "P" + UINT8 PctName_a_C; ///< String "C" + UINT8 PctName_a_T; ///< String "T" + UINT32 Value1; ///< Value1 + UINT16 Value2; ///< Value2 + UINT8 Value3; ///< Value3 + UINT8 GenericRegDescription1; ///< Generic Reg Description + UINT16 Length1; ///< Length1 + UINT8 AddressSpaceId1; ///< PCT Address Space ID + UINT8 RegisterBitWidth1; ///< PCT Register Bit Width + UINT8 RegisterBitOffset1; ///< PCT Register Bit Offset + UINT8 Reserved1; ///< Reserved + UINT32 ControlRegAddressLo; ///< Control Register Address Low + UINT32 ControlRegAddressHi; ///< Control Register Address High + UINT32 Value4; ///< Value4 + UINT16 Value5; ///< Value 5 + UINT8 GenericRegDescription2; ///< Generic Reg Description + UINT16 Length2; ///< Length2 + UINT8 AddressSpaceId2; ///< PCT Address Space ID + UINT8 RegisterBitWidth2; ///< PCT Register Bit Width + UINT8 RegisterBitOffset2; ///< PCT Register Bit Offset + UINT8 Reserved2; ///< Reserved + UINT32 StatusRegAddressLo; ///< Control Register Address Low + UINT32 StatusRegAddressHi; ///< Control Register Address High + UINT16 Value6; ///< Values +} PCT_HEADER_BODY; +#define PCT_STRUCT_SIZE 50 // 50 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Header) +//-------------------------------------------- +///Performance Supported States Header +typedef struct _PSS_HEADER { + UINT8 NameOpcode; ///< Opcode + UINT8 PssName_a__; ///< String "_" + UINT8 PssName_a_P; ///< String "P" + UINT8 PssName_a_S; ///< String "S" + UINT8 PssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< Package Opcode + UINT16 PssLength; ///< PSS Length + UINT8 NumOfItemsInPss; ///< Number of Items in PSS +} PSS_HEADER; +#define PSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Body) +//-------------------------------------------- +///Performance Supported States Body +typedef struct _PSS_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT8 DwordPrefixOpcode5; ///< Prefix Opcode5 + UINT32 Control; ///< Control + UINT8 DwordPrefixOpcode6; ///< Prefix Opcode6 + UINT32 Status; ///< Status +} PSS_BODY; +#define PSS_BODY_STRUCT_SIZE 33 // 33 Bytes + + +/*-------------------------------------------- + * AML code definition + * (XPSS Header) + *-------------------------------------------- + */ +/// Extended PSS Header +typedef struct _XPSS_HEADER { + UINT8 NameOpcode; ///< 08h + UINT8 XpssName_a_X; ///< String "X" + UINT8 XpssName_a_P; ///< String "P" + UINT8 XpssName_a_S; ///< String "S" + UINT8 XpssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< 12h + UINT16 XpssLength; ///< XPSS Length + UINT8 NumOfItemsInXpss; ///< Number of Items in XPSS +} XPSS_HEADER; +#define XPSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + +/*-------------------------------------------- + * AML code definition + * (XPSS Body) + *-------------------------------------------- + */ +/// Extended PSS Body +typedef struct _XPSS_BODY { + UINT8 PkgOpcode; ///< 12h + UINT8 PkgLength; ///< Package Length + UINT8 XpssValueTbd; ///< XPSS Value + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT32 ControlBuffer; ///< Control Buffer + UINT32 ControlLo; ///< Control Low + UINT32 ControlHi; ///< Control High + UINT32 StatusBuffer; ///< Status Buffer + UINT32 StatusLo; ///< Status Low + UINT32 StatusHi; ///< Status High + UINT32 ControlMaskBuffer; ///< Control Mask Buffer + UINT32 ControlMaskLo; ///< Control Mask Low + UINT32 ControlMaskHi; ///< Control Mask High + UINT32 StatusMaskBuffer; ///< Status Mask Buffer + UINT32 StatusMaskLo; ///< Status Mask Low + UINT32 StatusMaskHi; ///< Status Mask High +} XPSS_BODY; +#define XPSS_BODY_STRUCT_SIZE 72 // 72 Bytes + +/*-------------------------------------------- + * AML code definition + * (PPC Header and Body) + *-------------------------------------------- + */ +/// Performance Present Capabilities Header +typedef struct _PPC_HEADER_BODY { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PpcName_a_P; ///< String "P" + UINT8 PpcName_b_P; ///< String "P" + UINT8 PpcName_a_C; ///< String "C" + UINT8 PpcName_a_V; ///< String "V" + UINT8 Value1; ///< Value + UINT8 DefaultPerfPresentCap; ///< Default Perf Present Cap + UINT8 MethodOpcode; ///< Method Opcode + UINT8 PpcLength; ///< Method Length + UINT8 PpcName_a__; ///< String "_" + UINT8 PpcName_c_P; ///< String "P" + UINT8 PpcName_d_P; ///< String "P" + UINT8 PpcName_b_C; ///< String "C" + UINT8 MethodFlags; ///< Method Flags + UINT8 ReturnOpcode; ///< Return Opcoce + UINT8 PpcName_e_P; ///< String "P" + UINT8 PpcName_f_P; ///< String "P" + UINT8 PpcName_c_C; ///< String "C" + UINT8 PpcName_b_V; ///< String "V" + +} PPC_HEADER_BODY; +#define PPC_HEADER_BODY_STRUCT_SIZE 19 // 19 Bytes +#define PPC_METHOD_LENGTH 11 // 11 Bytes + + +/*-------------------------------------------- + * AML code definition + * (PSD Header) + *-------------------------------------------- + */ +/// P-State Dependency Header +typedef struct _PSD_HEADER { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PsdName_a__; ///< String "_" + UINT8 PsdName_a_P; ///< String "P" + UINT8 PsdName_a_S; ///< String "S" + UINT8 PsdName_a_D; ///< String "D" + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PsdLength; ///< PSD Length + UINT8 Value1; ///< Value +} PSD_HEADER; +#define PSD_HEADER_STRUCT_SIZE 8 // 8 Bytes + +/*-------------------------------------------- + * AML code definition + * (PSD Body) + *-------------------------------------------- + */ +/// P-State Dependency Body +typedef struct _PSD_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfEntries; ///< Number of Entries + UINT8 BytePrefixOpcode1; ///< Prefix Opcode1 in Byte + UINT8 PsdNumOfEntries; ///< PSD Number of Entries + UINT8 BytePrefixOpcode2; ///< Prefix Opcode2 in Byte + UINT8 PsdRevision; ///< PSD Revision + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 in DWord + UINT32 DependencyDomain; ///< Dependency Domain + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 in DWord + UINT32 CoordinationType; ///< (0xFC = SW_ALL, 0xFD = SW_ANY, 0xFE = HW_ALL) + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 in DWord + UINT32 NumOfProcessors; ///< Number of Processors +} PSD_BODY; +#define PSD_BODY_STRUCT_SIZE 22 // 22 Bytes + +//---------------------------------------------------------------------------- +// WHEA TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +/// HEST MCE TABLE +typedef struct _AMD_HEST_MCE_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_MCE structure. + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCapInitDataMSD; ///< the machine check global capability register(MCG_CAP). + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCtrlInitDataMSD; ///< the machine check global control register(MCG_CTL). + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[7]; ///< reserve 7 bytes as spec's required +} AMD_HEST_MCE_TABLE; + +/// HEST CMC TABLE +typedef struct _AMD_HEST_CMC_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_CMC structure. + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[3]; ///< reserve 3 bytes as spec's required +} AMD_HEST_CMC_TABLE; + +/// HEST BANK +typedef struct _AMD_HEST_BANK { + UINT8 BankNum; ///< Zero-based index identifies the machine check error bank. + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check bank + ///< is to be cleared during system initialization. + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT32 CtrlRegMSRAddr; ///< Address of the hardware bank's control MSR. Ignored if zero. + + UINT32 CtrlInitDataLSD; ///< This is the value the OS will program into the machine check + UINT32 CtrlInitDataMSD; ///< bank's control register + UINT32 StatRegMSRAddr; ///< Address of the hardware bank's MCi_STAT MSR. Ignored if zero. + UINT32 AddrRegMSRAddr; ///< Address of the hardware bank's MCi_ADDR MSR. Ignored if zero. + UINT32 MiscRegMSRAddr; ///< Address of the hardware bank's MCi_MISC MSR. Ignored if zero. +} AMD_HEST_BANK; + +/// Initial data of AMD_HEST_BANK +typedef struct _AMD_HEST_BANK_INIT_DATA { + UINT32 CtrlInitDataLSD; ///< Initial data of CtrlInitDataLSD + UINT32 CtrlInitDataMSD; ///< Initial data of CtrlInitDataMSD + UINT32 CtrlRegMSRAddr; ///< Initial data of CtrlRegMSRAddr + UINT32 StatRegMSRAddr; ///< Initial data of StatRegMSRAddr + UINT32 AddrRegMSRAddr; ///< Initial data of AddrRegMSRAddr + UINT32 MiscRegMSRAddr; ///< Initial data of MiscRegMSRAddr +} AMD_HEST_BANK_INIT_DATA; + +/// MSR179 Global Machine Check Capabilities data struct +typedef struct _MSR_MCG_CAP_STRUCT { + UINT64 Count:8; ///< Indicates the number of + ///< error-reporting banks visible to each core + UINT64 McgCtlP:1; ///< 1=The machine check control registers + UINT64 Rsvd:55; ///< reserved +} MSR_MCG_CAP_STRUCT; + +/// Initial data of WHEA +typedef struct _AMD_WHEA_INIT_DATA { + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into the machine + UINT32 GlobCapInitDataMSD; ///< Check global capability register + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will grogram into the machine + UINT32 GlobCtrlInitDataMSD; ///< Check global control register + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check + ///< bank is to be cleared during system initialization + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT8 HestBankNum; ///< Number of HEST Bank + AMD_HEST_BANK_INIT_DATA *HestBankInitData; ///< Pointer to Initial data of HEST Bank +} AMD_WHEA_INIT_DATA; + +//---------------------------------------------------------------------------- +// DMI TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// DMI brand information +typedef struct { + UINT16 String1:4; ///< String1 + UINT16 String2:4; ///< String2 + UINT16 Model:7; ///< Model + UINT16 Pg:1; ///< Page +} BRAND_ID; + +/// DMI cache information +typedef struct { + UINT32 L1CacheSize; ///< L1 cache size + UINT8 L1CacheAssoc; ///< L1 cache associativity + UINT32 L2CacheSize; ///< L2 cache size + UINT8 L2CacheAssoc; ///< L2 cache associativity + UINT32 L3CacheSize; ///< L3 cache size + UINT8 L3CacheAssoc; ///< L3 cache associativity +} CPU_CACHE_INFO; + +/// DMI processor information +typedef struct { + UINT8 ExtendedFamily; ///< Extended Family + UINT8 ExtendedModel; ///< Extended Model + UINT8 BaseFamily; ///< Base Family + UINT8 BaseModel; ///< Base Model + UINT8 Stepping; ///< Stepping + UINT8 PackageType; ///< PackageType + BRAND_ID BrandId; ///< BrandId which contains information about String1, String2, Model and Page + UINT8 TotalCoreNumber; ///< Number of total cores + UINT8 EnabledCoreNumber; ///< Number of enabled cores + UINT8 ProcUpgrade; ///< ProcUpdrade + CPU_CACHE_INFO CacheInfo; ///< CPU cache info +} CPU_TYPE_INFO; + +/// A structure containing processor name string and +/// the value that should be provide to DMI type 4 processor family +typedef struct { + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 T4ProcFamilySetting; ///< The value set to DMI type 4 processor family +} CPU_T4_PROC_FAMILY; + +/// DMI ECC information +typedef struct { + BOOLEAN EccCapable; ///< ECC Capable +} CPU_GET_MEM_INFO; + +/* Transfer vectors for DMI family specific routines */ +typedef VOID OPTION_DMI_GET_CPU_INFO ( + IN OUT CPU_TYPE_INFO *CpuInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_PROC_FAMILY ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT8 OPTION_DMI_GET_VOLTAGE ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_MAX_SPEED ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_EXT_CLOCK ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_MEM_INFO ( + IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Brand table entry format +typedef struct { + UINT8 PackageType; ///< Package type + UINT8 PgOfBrandId; ///< Page + UINT8 NumberOfCores; ///< Number of cores + UINT8 String1ofBrandId; ///< String1 + UINT8 ValueSetToDmiTable; ///< The value which will should be set to DMI table +} DMI_BRAND_ENTRY; + +/// Family specific data table structure +struct _PROC_FAMILY_TABLE { + UINT64 ProcessorFamily; ///< processor + OPTION_DMI_GET_CPU_INFO *DmiGetCpuInfo; ///< transfer vectors + OPTION_DMI_GET_PROC_FAMILY *DmiGetT4ProcFamily; ///< Get DMI type 4 processor family information + OPTION_DMI_GET_VOLTAGE *DmiGetVoltage; ///< vector for reading voltage + OPTION_DMI_GET_MAX_SPEED *DmiGetMaxSpeed; ///< vector for reading speed + OPTION_DMI_GET_EXT_CLOCK *DmiGetExtClock; ///< vector for reading external clock speed + OPTION_DMI_GET_MEM_INFO *DmiGetMemInfo; ///< Get memory information + UINT8 LenBrandList; ///< size of brand table + CONST DMI_BRAND_ENTRY *DmiBrandList; ///< translate brand info to DMI identifier +}; + +//---------------------------------------------------------------------------- +// SLIT TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Format for SRAT Header +typedef struct { + UINT8 Sign[4]; ///< Signature + UINT32 TableLength; ///< Table Length + UINT8 Revision; ///< Revision + UINT8 Checksum; ///< Checksum + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision +} ACPI_TABLE_HEADER; + +//---------------------------------------------------------------------------- +// SRAT TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Format for SRAT Header +typedef struct _CPU_SRAT_HEADER { + UINT8 Sign[4]; ///< Signature + UINT32 TableLength; ///< Table Length + UINT8 Revision; ///< Revision + UINT8 Checksum; ///< Checksum + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision + UINT32 TableRev; ///< Table Revision + UINT8 Reserved[8]; ///< Reserved +} CPU_SRAT_HEADER; + + +/// Format for SRAT APIC Affinity Entry +typedef struct _CPU_SRAT_APIC_ENTRY { + UINT8 Type; ///< Type + UINT8 Length; ///< Length + UINT8 Domain; ///< Domain + UINT8 ApicId; ///< Apic ID + UINT32 Flags; ///< Flags + UINT8 LSApicEid; ///< Local SAPIC EID + UINT8 Reserved[7]; ///< Reserved +} CPU_SRAT_APIC_ENTRY; + + +/// Format for SRAT Memory Affinity Entry +typedef struct _CPU_SRAT_MEMORY_ENTRY { + UINT8 Type; ///< 0: Memory affinity = 1 + UINT8 Length; ///< 1: Length = 40 bytes + UINT32 Domain; ///< 2: Proximity domain + UINT8 Reserved1[2]; ///< 6: Reserved + UINT32 BaseAddrLow; ///< 8: Low 32bits address base + UINT32 BaseAddrHigh; ///< 12: High 32bits address base + UINT32 LengthAddrLow; ///< 16: Low 32bits address limit + UINT32 LengthAddrHigh; ///< 20: High 32bits address limit + UINT8 Reserved2[4]; ///< 24: Memory Type + UINT32 Flags; ///< 28: Flags + UINT8 Reserved3[8]; ///< 32: Reserved +} CPU_SRAT_MEMORY_ENTRY; + +//---------------------------------------------------------------------------- +// CRAT TYPEDEFS, STRUCTURES, ENUMS +// Component Resource Affinity Table +//---------------------------------------------------------------------------- +/// Format for CRAT Header +typedef struct { + UINT8 Sign[4]; ///< CRAT, Signature for the Component Resource Affinity Table. + UINT32 Length; ///< Length, in bytes, of the entire CRAT + UINT8 Revision; ///< 0 + UINT8 Checksum; ///< Entire table must sum to zero. + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision + UINT32 TotalEntries; ///< total number[n] of entries in the CRAT + UINT16 NumDomains; ///< Number of HSA proximity domains + UINT8 Reserved[6]; ///< Reserved +} CRAT_HEADER; + +/// Flags field of the CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 CpuPresent:1; ///< Cpu Present + UINT32 GpuPresent:1; ///< Gpu Present + UINT32 IommuPresent:1; ///< IOMMU Present + UINT32 :27; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT_FLAG; + +/// CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT8 Type; ///< 0 - CRAT HSA Processing Unit Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_HSA_PROCESSING_UNIT_FLAG Flags; ///< Flags - HSA Processing Unit Affinity Structure + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 ProcessorIdLow; ///< Low value of the logical processor included in this HSA proximity domain + UINT16 NumCPUCores; ///< Indicates count of CCompute execution units present in this APU node. + UINT16 NumSIMDCores; ///< Indicates maximum count of HCompute SIMD cores present in this node. + UINT16 MaxWavesSIMD; ///< This identifies the max. number of launched waves per SIMD. + UINT16 IoCount; ///< Number of discoverable IO Interfaces connecting this node to other components. + UINT16 HSACapability; ///< Must be 0 + UINT16 LDSSizeInKB; ///< Size of LDS memory per SIMD Wavefront + UINT8 WaveFrontSize; ///< 64, may be 32 for some FSA based architectures + UINT8 NumBanks; ///< Number of Banks or "Shader Engines", typically 1 or 2 + UINT16 uEngineIdentifier; ///< Identifier (Rev) of the GPU uEngine or firmware + UINT8 NumArrays; ///< Number of SIMD Arrays per Engine + UINT8 NumCUPerArray; ///< Number of Compute Units (CU) per SIMD Array + UINT8 NumSIMDPerCU; ///< Number of SIMD representing a Compute Unit + UINT8 MaxSlotsScratchCU; ///< Max. Number of temp. memory ("scratch") wave slots + ///< available to access, may be 0 if HW has no restrictions + UINT8 Reserved1[4]; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT; + +/// Flags field of the CRAT Memory Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 NonVolatile:1; ///< If set, the memory region represents Non-Volatile memory + UINT32 :29; ///< Reserved +} CRAT_MEMORY_FLAG; + +/// CRAT Memory Affinity Structure +typedef struct { + UINT8 Type; ///< 1 - CRAT Memory Affinity Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_MEMORY_FLAG Flags; ///< Flags - Memory Affinity Structure. Indicates whether the region of memory is enabled and can be hot plugged + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 BaseAddressLow; ///< Low 32Bits of the Base Address of the memory range + UINT32 BaseAddressHigh; ///< High 32Bits of the Base Address of the memory range + UINT32 LengthLow; ///< Low 32Bits of the length of the memory range + UINT32 LengthHigh; ///< High 32Bits of the length of the memory range + UINT32 Width; ///< Memory width - Specifies the number of parallel bits of the memory interface + UINT8 Reserved1[8]; ///< Reserved +} CRAT_MEMORY; + +/// Flags field of the CRAT Cache Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataCache:1; ///< 1 if cache includes data + UINT32 InstructionCache:1; ///< 1 if cache includes instructions + UINT32 CpuCache:1; ///< 1 if cache is part of CPU functionality + UINT32 SimdCache:1; ///< 1 if cache is part of SIMD functionality + UINT32 :27; ///< Reserved +} CRAT_CACHE_FLAG; + +/// CRAT Cache Affinity Structure +typedef struct { + UINT8 Type; ///< 2 - CRAT Cache Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_CACHE_FLAG Flags; ///< Flags - Cache Affinity Structure. Indicates whether the region of cache is enabled + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 CacheSize; ///< Cache size in KB + UINT8 CacheLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 LinesPerTag; ///< Cache Lines per tag + UINT16 CacheLineSize; ///< Cache line size in bytes + UINT8 Associativity; ///< Cache associativity + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative + UINT8 CacheProperties; ///< Cache Properties bits [2:0] represent Inclusive/Exclusive property encoded. + ///< 0: Cache is strictly exclusive to lower level caches. + ///< 1: Cache is mostly exclusive to lower level caches. + ///< 2: Cache is strictly inclusive to lower level caches. + ///< 3: Cache is mostly inclusive to lower level caches. + ///< 4: Cache is a "constant cache" (= explicit update) + ///< 5: Cache is a "specialty cache" (e.g. Texture cache) + ///< 6-7: Reserved + ///< CacheProperties bits [7:3] are reserved + UINT16 CacheLatency; ///< Cost of time to access cache described in nanoseconds. + UINT8 Reserved1[8]; ///< Reserved +} CRAT_CACHE; + +/// Flags field of the CRAT TLB Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataTLB:1; ///< 1 if TLB includes translation information for data. + UINT32 InstructionTLB:1; ///< 1 if TLB includes translation information for instructions. + UINT32 CpuTLB:1; ///< 1 if TLB is part of CPU functionality + UINT32 SimdTLB:1; ///< 1 if TLB is part of SIMD functionality + UINT32 TLB4KBase256:1; ///< 1 if value in table is factored by 256 to get number of 4K entries + UINT32 :1; ///< Reserved + UINT32 TLB2MBase256:1; ///< 1 if value in table is factored by 256 to get number of 2M entries + UINT32 :1; ///< Reserved + UINT32 TLB1GBase256:1; ///< 1 if value in table is factored by 256 to get number of 1G entries + UINT32 :22; ///< Reserved +} CRAT_TLB_FLAG; + +/// CRAT TLB Affinity Structure +typedef struct { + UINT8 Type; ///< 3 - CRAT TLB Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_TLB_FLAG Flags; ///< Flags - TLB Affinity Structure. Indicates whether the TLB is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 TlbLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 DataTlbAssociativity2MB; ///< Data TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 DataTlbSize2MB; ///< Data TLB number of entries for 2MB. + UINT8 InstructionTlbAssociativity2MB; ///< Instruction TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 InstructionTlbSize2MB; ///< Instruction TLB number of entries for 2MB pages. + UINT8 DataTlbAssociativity4K; ///< Data TLB Associativity for 4KB pages + UINT8 DataTlbSize4K; ///< Data TLB number of entries for 4KB pages + UINT8 InstructionTlbAssociativity4K; ///< Instruction TLB Associativity for 4KB pages + UINT8 InstructionTlbSize4K; ///< Instruction TLB number of entries for 4KB pages + UINT8 DataTlbAssociativity1G; ///< Data TLB Associativity for 1GB pages + UINT8 DataTlbSize1G; ///< Data TLB number of entries for 1GB pages + UINT8 InstructionTlbAssociativity1G; ///< Instruction TLB Associativity for 1GB pages + UINT8 InstructionTlbSize1G; ///< Instruction TLB number of entries for 1GB pages + UINT8 Reserved1[4]; ///< Reserved +} CRAT_TLB; + +/// Flags field of the CRAT FPU Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 :31; ///< Reserved +} CRAT_FPU_FLAG; + +/// CRAT FPU Affinity Structure +typedef struct { + UINT8 Type; ///< 4 - CRAT FPU Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_FPU_FLAG Flags; ///< Flags - FPU Affinity Structure. Indicates whether the region of FPU affinity structure is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 FPUSize; ///< Product specific + UINT8 Reserved1[16]; ///< Reserved +} CRAT_FPU; + +/// Flags field of the CRAT IO Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 Coherency:1; ///< If set, IO interface supports coherent transactions (natively or through protocol extensions) + UINT32 :30; ///< Reserved +} CRAT_IO_FLAG; + +/// CRAT IO Affinity Structure +typedef struct { + UINT8 Type; ///< 5 - CRAT IO Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_IO_FLAG Flags; ///< Flags - IO Affinity Structure. Indicates whether the region of IO affinity structure is enabled and defined. + UINT32 ProximityDomainFrom; ///< Integer that represents the proximity domain to which the IO Interface belongs to + UINT32 ProximityDomainTo; ///< Integer that represents the other proximity domain to which the IO Interface belongs to + UINT8 IoType; ///< IO Interface type. Values defined are + ///< 0: Undefined + ///< 1: Hypertransport + ///< 2: PCI Express + ///< 3: Other (e.g. internal) + ///< 4-255: Reserved + UINT8 VersionMajor; ///< Major version of the Bus interface + UINT16 VersionMinor; ///< Minor version of the Bus interface ((optional) + UINT32 MinimumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MaximumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MinimumBandwidth; ///< Minimum interface Bandwidth in MB/s + UINT32 MaximumBandwidth; ///< Maximum interface Bandwidth in MB/s + UINT32 RecommendedTransferSize; ///< Recommended transfer size to reach maximum interface bandwidth in Bytes + UINT8 Reserved1[24]; ///< Reserved +} CRAT_IO; + +#define CRAT_MAX_LENGTH 0x800ul ///< Reserve 2K for CRAT +/// CRAT entry type +typedef enum { + CRAT_TYPE_HSA_PROC_UNIT = 0, ///< 0 - CRAT HSA Processing Unit Structure + CRAT_TYPE_MEMORY, ///< 1 - CRAT Memory Affinity Structure + CRAT_TYPE_CACHE, ///< 2 - CRAT Cache Affinity Structure + CRAT_TYPE_TLB, ///< 3 - CRAT TLB Affinity Structure + CRAT_TYPE_FPU, ///< 4 - CRAT FPU Affinity Structure + CRAT_TYPE_IO, ///< 5 - CRAT IO Affinity Structure +} CRAT_ENTRY_TYPE; + +/*---------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *---------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +AmdCpuLate ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +AGESA_STATUS +CreateAcpiWhea ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT VOID **WheaMcePtr, + IN OUT VOID **WheaCmcPtr + ); + +AGESA_STATUS +CreateDmiRecords ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT DMI_INFO **DmiTable + ); + +AGESA_STATUS +GetType4Type7Info ( + IN AP_EXE_PARAMS *ApExeParams + ); + +VOID +DmiGetT4ProcFamilyFromBrandId ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetNameString ( + IN OUT CHAR8 *String, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +IsSourceStrContainTargetStr ( + IN OUT CHAR8 *SourceStr, + IN OUT CONST CHAR8 *TargetStr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +CreateAcpiCrat ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + OUT VOID **CratPtr + ); + +AGESA_STATUS +CreateAcpiCdit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + OUT VOID **CditPtr + ); + +AGESA_STATUS +CreateAcpiSrat ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT VOID **SratPtr + ); + +AGESA_STATUS +CreateAcpiSlit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN OUT VOID **SlitPtr + ); + +VOID +ChecksumAcpiTable ( + IN OUT ACPI_TABLE_HEADER *Table, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +RunLateApTaskOnAllAPs ( + IN AP_EXE_PARAMS *ApParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +RunLateApTaskOnAllCore0s ( + IN AP_EXE_PARAMS *ApParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif // _CPU_LATE_INIT_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuRegisters.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuRegisters.h new file mode 100644 index 0000000000..e41226a770 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/cpuRegisters.h @@ -0,0 +1,479 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 284995 $ @e \$Date: 2014-02-17 11:17:41 -0600 (Mon, 17 Feb 2014) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _CPU_REGISTERS_H_ +#define _CPU_REGISTERS_H_ + +#include "cpuFamRegisters.h" +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +#undef BIT0 +#undef BIT1 +#undef BIT2 +#undef BIT3 +#undef BIT4 +#undef BIT5 +#undef BIT6 +#undef BIT7 +#undef BIT8 +#undef BIT9 +#undef BIT10 +#undef BIT10 +#undef BIT11 +#undef BIT12 +#undef BIT13 +#undef BIT14 +#undef BIT15 +#undef BIT16 +#undef BIT17 +#undef BIT18 +#undef BIT19 +#undef BIT20 +#undef BIT21 +#undef BIT22 +#undef BIT23 +#undef BIT24 +#undef BIT25 +#undef BIT26 +#undef BIT27 +#undef BIT28 +#undef BIT29 +#undef BIT30 +#undef BIT31 +#undef BIT32 +#undef BIT33 +#undef BIT34 +#undef BIT35 +#undef BIT36 +#undef BIT37 +#undef BIT38 +#undef BIT39 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT50 +#undef BIT51 +#undef BIT52 +#undef BIT53 +#undef BIT54 +#undef BIT55 +#undef BIT56 +#undef BIT57 +#undef BIT58 +#undef BIT59 +#undef BIT60 +#undef BIT61 +#undef BIT62 +#undef BIT63 + +#define BIT0 0x0000000000000001ull +#define BIT1 0x0000000000000002ull +#define BIT2 0x0000000000000004ull +#define BIT3 0x0000000000000008ull +#define BIT4 0x0000000000000010ull +#define BIT5 0x0000000000000020ull +#define BIT6 0x0000000000000040ull +#define BIT7 0x0000000000000080ull +#define BIT8 0x0000000000000100ull +#define BIT9 0x0000000000000200ull +#define BIT10 0x0000000000000400ull +#define BIT11 0x0000000000000800ull +#define BIT12 0x0000000000001000ull +#define BIT13 0x0000000000002000ull +#define BIT14 0x0000000000004000ull +#define BIT15 0x0000000000008000ull +#define BIT16 0x0000000000010000ull +#define BIT17 0x0000000000020000ull +#define BIT18 0x0000000000040000ull +#define BIT19 0x0000000000080000ull +#define BIT20 0x0000000000100000ull +#define BIT21 0x0000000000200000ull +#define BIT22 0x0000000000400000ull +#define BIT23 0x0000000000800000ull +#define BIT24 0x0000000001000000ull +#define BIT25 0x0000000002000000ull +#define BIT26 0x0000000004000000ull +#define BIT27 0x0000000008000000ull +#define BIT28 0x0000000010000000ull +#define BIT29 0x0000000020000000ull +#define BIT30 0x0000000040000000ull +#define BIT31 0x0000000080000000ull +#define BIT32 0x0000000100000000ull +#define BIT33 0x0000000200000000ull +#define BIT34 0x0000000400000000ull +#define BIT35 0x0000000800000000ull +#define BIT36 0x0000001000000000ull +#define BIT37 0x0000002000000000ull +#define BIT38 0x0000004000000000ull +#define BIT39 0x0000008000000000ull +#define BIT40 0x0000010000000000ull +#define BIT41 0x0000020000000000ull +#define BIT42 0x0000040000000000ull +#define BIT43 0x0000080000000000ull +#define BIT44 0x0000100000000000ull +#define BIT45 0x0000200000000000ull +#define BIT46 0x0000400000000000ull +#define BIT47 0x0000800000000000ull +#define BIT48 0x0001000000000000ull +#define BIT49 0x0002000000000000ull +#define BIT50 0x0004000000000000ull +#define BIT51 0x0008000000000000ull +#define BIT52 0x0010000000000000ull +#define BIT53 0x0020000000000000ull +#define BIT54 0x0040000000000000ull +#define BIT55 0x0080000000000000ull +#define BIT56 0x0100000000000000ull +#define BIT57 0x0200000000000000ull +#define BIT58 0x0400000000000000ull +#define BIT59 0x0800000000000000ull +#define BIT60 0x1000000000000000ull +#define BIT61 0x2000000000000000ull +#define BIT62 0x4000000000000000ull +#define BIT63 0x8000000000000000ull + +/// CPUID related registers +#define AMD_CPUID_FMF 0x80000001ul // Family Model Features information +#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID +#define AMD_CPUID_L2L3Cache_L2TLB 0x80000006ul +#define CPUID_ASSOCIATIVITY_DISABLED 0x00 +#define CPUID_ASSOCIATIVITY_1_WAY 0x01 +#define CPUID_ASSOCIATIVITY_2_WAY 0x02 +#define CPUID_ASSOCIATIVITY_4_WAY 0x04 +#define CPUID_ASSOCIATIVITY_8_WAY 0x06 +#define CPUID_ASSOCIATIVITY_16_WAY 0x08 +#define CPUID_ASSOCIATIVITY_32_WAY 0x0A +#define CPUID_ASSOCIATIVITY_48_WAY 0x0B +#define CPUID_ASSOCIATIVITY_64_WAY 0x0C +#define CPUID_ASSOCIATIVITY_96_WAY 0x0D +#define CPUID_ASSOCIATIVITY_128_WAY 0x0E +#define CPUID_ASSOCIATIVITY_FULLY 0x0F +#define AMD_CPUID_TLB_L1Cache 0x80000005ul +#define AMD_CPUID_L1L2Tlb1GIdentifiers 0x80000019ul +#define AMD_CPUID_APM 0x80000007ul +#define LOCAL_APIC_ID 24 +#define LOGICAL_PROCESSOR_COUNT 16 +#define AMD_CPUID_ASIZE_PCCOUNT 0x80000008ul // Address Size, Physical Core Count + +/// CPU Logical ID Transfer +typedef struct { + UINT32 RawId; ///< RawID + UINT64 LogicalId; ///< LogicalID +} CPU_LOGICAL_ID_XLAT; + +/// Logical CPU ID Table +typedef struct { + IN UINT32 Elements; ///< Number of Elements + IN CPU_LOGICAL_ID_XLAT *LogicalIdTable; ///< CPU Logical ID Transfer table Pointer +} LOGICAL_ID_TABLE; + +// MSRs +// ------------------------ +#define MCG_CTL_P 0x00000100ul // bit 8 for MCG_CTL_P under MSRR +#define MSR_MCG_CAP 0x00000179ul +#define DBG_CTL_MSR 0x000001D9ul +#define MSR_MC0_CTL 0x00000400ul +#define MSR_MC0_STATUS 0x00000401ul +#define MSR_MC0_MISC 0x00000403ul +#define MSR_MC1_MISC 0x00000407ul +#define MSR_MC2_MISC 0x0000040Bul +#define MSR_MC4_CTL 0x00000410ul +#define MSR_MC4_MISC0 0x00000413ul +#define MSR_MC5_MISC 0x00000417ul +#define MSR_MC4_MISC1 0xC0000408ul +#define MSR_MC5_STATUS 0x00000415ul +#define MSR_MC6_STATUS 0x00000419ul + +#define MSR_APIC_BAR 0x0000001Bul +#define MSR_PATCH_LEVEL 0x0000008Bul + +#define CPUID_LONG_MODE_ADDR 0x80000008ul + +#define MSR_EXTENDED_FEATURE_EN 0xC0000080ul +#define MSR_MC_MISC_LINK_THRESHOLD 0xC0000408ul +#define MSR_MC_MISC_L3_THRESHOLD 0xC0000409ul +#define MSR_PATCH_LOADER 0xC0010020ul + +/// Patch Loader Register +typedef struct { + UINT64 PatchBase:32; ///< Linear address of patch header address block + UINT64 SBZ:32; ///< Should be zero +} PATCH_LOADER_MSR; + +#define MSR_SYS_CFG 0xC0010010ul // SYSCFG - F15 Shared +#define MSR_TOM2 0xC001001Dul // TOP_MEM2 - F15 Shared +#define MSR_MC0_CTL_MASK 0xC0010044ul // MC0 Control Mask +#define MSR_MC1_CTL_MASK 0xC0010045ul // MC1 Control Mask +#define MSR_MC2_CTL_MASK 0xC0010046ul // MC2 Control Mask +#define MSR_MC4_CTL_MASK 0xC0010048ul // MC4 Control Mask + +#define MSR_CPUID_FEATS 0xC0011004ul // CPUID Features +#define MSR_CPUID_EXT_FEATS 0xC0011005ul // CPUID Extended Features +#define MSR_HDT_CFG 0xC001100Aul +#define MSR_HWCR 0xC0010015ul +#define MSR_NB_CFG 0xC001001Ful // NB Config +#define CPU_WDT_CFG 0xC0010074ul +#define ENABLE_CF8_EXT_CFG 0x00004000ul // [46] +#define INIT_APIC_CPUID_LO 0x00400000ul // [54] +#define MSR_CU_SPMCTL 0xC0010281ul +#define MSR_CpuWdtCfg 0xC0010074ul // CPU Watchdog Timer +#define MSR_LS_CFG 0xC0011020ul +#define MSR_IC_CFG 0xC0011021ul // ICache Config - F15 Shared +#define MSR_DC_CFG 0xC0011022ul +#define MSR_ME_CFG 0xC0011029ul +#define MSR_BU_CFG 0xC0011023ul +#define MSR_CU_CFG 0xC0011023ul // F15 Shared +#define MSR_DE_CFG 0xC0011029ul // F15 Shared +#define MSR_BU_CFG2 0xC001102Aul +#define MSR_CU_CFG2 0xC001102Aul // F15 Shared +#define MSR_BU_CFG3 0xC001102Bul +#define MSR_CU_CFG3 0xC001102Bul // F15 Shared +#define MSR_LS_CFG2 0xC001102Dul +#define MSR_CU_PFTCFG 0xC001102Ful +#define MSR_IBS_OP_DATA3 0xC0011037ul +#define MSR_C001_1070 0xC0011070ul // F15 Shared + + +#define MSR_CPUID_NAME_STRING0 0xC0010030ul // First CPUID namestring register +#define MSR_CPUID_NAME_STRING1 0xC0010031ul +#define MSR_CPUID_NAME_STRING2 0XC0010032ul +#define MSR_CPUID_NAME_STRING3 0xC0010033ul +#define MSR_CPUID_NAME_STRING4 0xC0010034ul +#define MSR_CPUID_NAME_STRING5 0xC0010035ul // Last CPUID namestring register +#define MSR_MMIO_Cfg_Base 0xC0010058ul // MMIO Configuration Base Address Register +#define MSR_BIST 0xC0010060ul // BIST Results register +#define MSR_OSVW_ID_Length 0xC0010140ul +#define MSR_OSVW_Status 0xC0010141ul +#define MSR_NB_PERF_CTL0 0xC0010240ul +#define MSR_NB_PERF_CTR0 0xC0010241ul +#define MSR_NB_PERF_CTL1 0xC0010242ul +#define MSR_NB_PERF_CTR1 0xC0010243ul +#define MSR_NB_PERF_CTL2 0xC0010244ul +#define MSR_NB_PERF_CTR2 0xC0010245ul +#define MSR_NB_PERF_CTL3 0xC0010246ul +#define MSR_NB_PERF_CTR3 0xC0010247ul +#define CU_SPMCTL 0xC0010281ul // Streaming Performance Monitor Control +#define MSR_PERF_CONTROL3 0xC0010003ul // Performance control register number 3 +#define MSR_PERF_COUNTER3 0xC0010007ul // Performance counter register number 3 +#define PERF_RESERVE_BIT_MASK 0x030FFFDFFFFFull // Mask of the Performance control Reserve bits +#define PERF_CAR_CORRUPTION_EVENT 0x040040F0E2ul // Configure the controller to capture the + // CAR Corruption +// FUNC_0 registers +// ---------------- +#define LINK_INIT_CTRL 0x6C +#define LINK_INIT_CTRL_REQ_DIS 0x02 // [1] = ReqDis +#define LINK_INIT_COLD_RST_DET BIT4 +#define LINK_INIT_BIOS_RST_DET_0 BIT5 +#define LINK_INIT_BIOS_RST_DET_1 BIT9 +#define LINK_INIT_BIOS_RST_DET_2 BIT10 +#define LINK_INIT_BIOS_RST_DET BIT9 | BIT10 +#define EXTENDED_NODE_ID 0x160 + +#define CORE_CTRL 0x1DC +#define CORE_CTRL_CORE1_EN 0x00000002ul +#define CORE_CTRL_CORE2_EN 0x00000004ul +#define CORE_CTRL_CORE3_EN 0x00000008ul +#define CORE_CTRL_CORE4_EN 0x00000010ul +#define CORE_CTRL_CORE5_EN 0x00000020ul +#define CORE_CTRL_CORE6_EN 0x00000040ul +#define CORE_CTRL_CORE7_EN 0x00000080ul +#define CORE_CTRL_CORE8_EN 0x00000100ul +#define CORE_CTRL_CORE9_EN 0x00000200ul + +// FUNC_3 registers +// ---------------- +#define HARDWARE_THERMAL_CTRL_REG 0x64 +#define SOFTWARE_THERMAL_CTRL_REG 0x68 + +#define ACPI_PSC_0_REG 0x80 // ACPI Power State Control Registers +#define ACPI_PSC_4_REG 0x84 + +#define NB_CFG_HIGH_REG 0x8C +#define POWER_CTRL_MISCELLANEOUS_REG 0xA0 +#define CLOCK_POWER_TIMING_CTRL2_REG 0xDC +#define NORTH_BRIDGE_CAPABILITIES_REG 0xE8 +#define MULTI_NODE_CPU 29 +#define CPUID_FMR 0xFC // Family / Model registers +#define DOWNCORE_CTRL 0x190 // Downcore Control Register + +#define LINK_TO_XCS_TOKEN_COUNT_REG_3X148 0x148 +#define REG_HT4_PHY_OFFSET_BASE_4X180 0x180 +#define REG_HT4_PHY_DATA_PORT_BASE_4X184 0x184 + +// FUNC_4 registers +// ---------------- +/* Native Die CPUID Register F4x160 */ +#define NATIVE_DIE_CPUID_REG 0x160 +#define NATIVE_DIE_CPUID_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, NATIVE_DIE_CPUID_REG)) + +/// Native Die CPUID PCI Register +typedef struct { + UINT32 Stepping:4; ///< Stepping + UINT32 BaseModel:4; ///< Base Model + UINT32 BaseFamily:4; ///< Base Family + UINT32 :4; ///< Reserved + UINT32 ExtModel:4; ///< Extended Model + UINT32 ExtFamily:8; ///< Extended Family + UINT32 :4; ///< Reserved +} NATIVE_DIE_CPUID_REGISTER; + +// FUNC_5 registers +// ---------------- +#define COMPUTE_UNIT_STATUS 0x80 +#define NORTH_BRIDGE_CAPABILITIES_2_REG 0x84 + + +// Misc. defines. +#define PCI_DEV_BASE 24 + +#define CPUID_STEPPING_MASK 0x0000000Ful +#define CPUID_BASE_MODEL_MASK 0x000000F0ul +#define CPUID_BASE_FAMILY_MASK 0x00000F00ul +#define CPUID_EXT_MODEL_MASK 0x000F0000ul +#define CPUID_EXT_FAMILY_MASK 0x0FF00000ul + +#define TN_SOCKET_FP2 0 +#define TN_SOCKET_FS1 1 +#define TN_SOCKET_FM2 2 +#define KV_SOCKET_FP3 0 +#define KV_SOCKET_FM2r2 1 +#define SOCKET_IGNORE 0xF + +#define LAPIC_BASE_ADDR_MASK 0x0000FFFFFFFFF000ull +#define APIC_EXT_BRDCST_MASK 0x000E0000ul +#define APIC_ENABLE_BIT 0x00000800ul +#define LOCAL_APIC_ADDR 0xFEE00000ul +#define INT_CMD_REG_LO 0x300 +#define INT_CMD_REG_HI 0x310 +#define REMOTE_MSG_REG 0x380 +#define REMOTE_READ_REG 0xC0 +#define APIC_ID_REG 0x20 +#define APIC20_ApicId 24 +#define CMD_REG_TO_READ_DATA 0x338 + +#define MAX_CORE_ID_SIZE 8 +#define MAX_CORE_ID_MASK ((1 << MAX_CORE_ID_SIZE) - 1) + +/*------------------------- + * Default definitions + *------------------------- + */ +#define DOWNCORE_MASK_SINGLE 0xFFFFFFFEul +#define DOWNCORE_MASK_DUAL 0xFFFFFFFCul +#define DOWNCORE_MASK_TRI 0xFFFFFFF8ul +#define DOWNCORE_MASK_FOUR 0xFFFFFFF0ul +#define DOWNCORE_MASK_FIVE 0xFFFFFFE0ul +#define DOWNCORE_MASK_SIX 0xFFFFFFC0ul +#define DOWNCORE_MASK_SEVEN 0xFFFFFF80ul +#define DOWNCORE_MASK_EIGHT 0xFFFFFF00ul +#define DOWNCORE_MASK_TEN 0xFFFFFC00ul +#define DOWNCORE_MASK_TWELVE 0xFFFFF000ul +#define DOWNCORE_MASK_FOURTEEN 0xFFFFC000ul +#define DOWNCORE_MASK_DUAL_COMPUTE_UNIT 0xFFFFFFFAul +#define DOWNCORE_MASK_TRI_COMPUTE_UNIT 0xFFFFFFEAul +#define DOWNCORE_MASK_FOUR_COMPUTE_UNIT 0xFFFFFFAAul +#define DOWNCORE_MASK_FIVE_COMPUTE_UNIT 0xFFFFFEAAul +#define DOWNCORE_MASK_SIX_COMPUTE_UNIT 0xFFFFFAAAul +#define DOWNCORE_MASK_SEVEN_COMPUTE_UNIT 0xFFFFEAAAul +#define DOWNCORE_MASK_EIGHT_COMPUTE_UNIT 0xFFFFAAAAul + +#define DELIVERY_STATUS BIT13 +#define REMOTE_READ_STAT_MASK 0x00030000ul +#define REMOTE_DELIVERY_PENDING 0x00010000ul +#define REMOTE_DELIVERY_DONE 0x00020000ul + +/* + * -------------------------------------------------------------------------------------- + * + * D E F I N E S / T Y P E D E F S / S T R U C T U R E S + * + * -------------------------------------------------------------------------------------- + */ + +/// CpuEarly param type +typedef struct { + IN UINT8 MemInitPState; ///< Pstate value during memory initial + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Runtime configurable user options +} AMD_CPU_EARLY_PARAMS; + +/// CPUID +typedef enum { + REG_EAX, ///< EAX + REG_EBX, ///< EBX + REG_ECX, ///< ECX + REG_EDX ///< EDX +} CPUID_REG; + +#endif // _CPU_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/CPU/heapManager.h b/src/vendorcode/amd/pi/00630F01/Proc/CPU/heapManager.h new file mode 100644 index 0000000000..7a68ed515e --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/CPU/heapManager.h @@ -0,0 +1,258 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Heap Manager and Heap Allocation APIs, and related functions. + * + * Contains code that initialize, maintain, and allocate the heap space. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 296129 $ @e \$Date: 2014-06-23 09:45:14 -0500 (Mon, 23 Jun 2014) $ + * + */ +/* + ****************************************************************************** + * + * Copyright 2008 - 2014 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ****************************************************************************** + */ + +#ifndef _HEAP_MANAGER_H_ +#define _HEAP_MANAGER_H_ + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +#define AMD_MTRR_VARIABLE_BASE0 0x200 +#define AMD_MTRR_VARIABLE_HEAP_BASE 0x20A +#define AMD_MTRR_VARIABLE_HEAP_MASK (AMD_MTRR_VARIABLE_HEAP_BASE + 1) + +#define AMD_HEAP_START_ADDRESS 0x400000ul +#define AMD_HEAP_REGION_END_ADDRESS 0xBFFFFFul +#define AMD_HEAP_SIZE_PER_CORE 0x010000ul +#define AMD_HEAP_INVALID_HEAP_OFFSET 0xFFFFFFFFul +#define AMD_HEAP_MTRR_MASK ((0xFFFFFFFFFFFFF800ull & (((UINT64)AMD_HEAP_SIZE_PER_CORE ^ (-1)) + 1)) | 0x800) +#define AMD_HEAP_SIZE_DWORD_PER_CORE (AMD_HEAP_SIZE_PER_CORE / 4) + +#define AMD_TEMP_TOM 0x20000000ul // Set TOM to 512 MB (temporary value) +#define AMD_VAR_MTRR_ENABLE_BIT 0x100000ul // bit 20 + +#define AMD_HEAP_RAM_ADDRESS 0xB0000ul + +#define HEAP_SIGNATURE_VALID 0x50414548ul // Signature: 'HEAP' +#define HEAP_SIGNATURE_INVALID 0x00000000ul // Signature cleared + +///Heap Manager Life cycle +#define HEAP_DO_NOT_EXIST_YET 1 +#define HEAP_LOCAL_CACHE 2 +#define HEAP_TEMP_MEM 3 +#define HEAP_SYSTEM_MEM 4 +#define HEAP_DO_NOT_EXIST_ANYMORE 5 +#define HEAP_S3_RESUME 6 +#define HEAP_RUNTIME_SYSTEM_MEM 7 + +///Heap callout +#define HEAP_CALLOUT_BOOTTIME 0 +#define HEAP_CALLOUT_RUNTIME 1 + +#define AMD_MTRR_FIX64k_00000 0x250 +#define AMD_MTRR_FIX16k_80000 0x258 +#define AMD_MTRR_FIX16k_A0000 0x259 +#define AMD_MTRR_FIX4k_C0000 0x268 +#define AMD_MTRR_FIX4k_C8000 0x269 +#define AMD_MTRR_FIX4k_D0000 0x26A +#define AMD_MTRR_FIX4k_D8000 0x26B +#define AMD_MTRR_FIX4k_E0000 0x26C +#define AMD_MTRR_FIX4k_E8000 0x26D +#define AMD_MTRR_FIX4k_F0000 0x26E +#define AMD_MTRR_FIX4k_F8000 0x26F + +#define AMD_MTRR_FIX64K_WB_DRAM 0x1E +#define AMD_MTRR_FIX64K_WT_DRAM 0x1C +#define AMD_MTRR_FIX64K_UC_DRAM 0x18 +#define AMD_MTRR_FIX16K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX16K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX16K_UC_DRAM 0x1818181818181818ull +#define AMD_MTRR_FIX4K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX4K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX4K_UC_DRAM 0x1818181818181818ull + +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +/// Allocate Heap Parameters +typedef struct _ALLOCATE_HEAP_PARAMS { + UINT32 RequestedBufferSize; ///< Size of buffer. + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 *BufferPtr; ///< Pointer to buffer. +} ALLOCATE_HEAP_PARAMS; + +/// Locate Heap Parameters +typedef struct _LOCATE_HEAP_PTR { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Data buffer size. + UINT8 *BufferPtr; ///< Pointer to buffer. +} LOCATE_HEAP_PTR; + +/// Heap Node Header +typedef struct _BUFFER_NODE { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Size of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 PadSize; ///< Size of pad. + UINT32 OffsetOfNextNode; ///< Offset of next node (relative to the base). +} BUFFER_NODE; + +/// Heap Manager +typedef struct _HEAP_MANAGER { + UINT32 Signature; ///< a signature to indicate if the heap is valid. + UINT32 UsedSize; ///< Used size of heap. + UINT32 FirstActiveBufferOffset; ///< Offset of the first active buffer. + UINT32 FirstFreeSpaceOffset; ///< Offset of the first free space. +} HEAP_MANAGER; + +/// AGESA Buffer Handles (These are reserved) +typedef enum { + AMD_INIT_RESET_HANDLE = 0x000A000, ///< Assign 0x000A000 buffer handle to AmdInitReset routine. + AMD_INIT_EARLY_HANDLE, ///< Assign 0x000A001 buffer handle to AmdInitEarly routine. + AMD_INIT_POST_HANDLE, ///< Assign 0x000A002 buffer handle to AmdInitPost routine. + AMD_INIT_ENV_HANDLE, ///< Assign 0x000A003 buffer handle to AmdInitEnv routine. + AMD_INIT_MID_HANDLE, ///< Assign 0x000A004 buffer handle to AmdInitMid routine. + AMD_INIT_LATE_HANDLE, ///< Assign 0x000A005 buffer handle to AmdInitLate routine. + AMD_INIT_RESUME_HANDLE, ///< Assign 0x000A006 buffer handle to AmdInitResume routine. + AMD_LATE_RUN_AP_TASK_HANDLE, ///< Assign 0x000A007 buffer handle to AmdLateRunApTask routine. + AMD_S3_SAVE_HANDLE, ///< Assign 0x000A008 buffer handle to AmdS3Save routine. + AMD_S3_LATE_RESTORE_HANDLE, ///< Assign 0x000A009 buffer handle to AmdS3LateRestore routine. + AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, ///< Assign 0x000A00A buffer handle to be used for S3 save table + AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, ///< Assign 0x000A00B buffer handle to be used for S3 save table + AMD_CPU_AP_TASKING_HANDLE, ///< Assign 0x000A00C buffer handle to AP tasking input parameters. + AMD_REC_MEM_SOCKET_HANDLE, ///< Assign 0x000A00D buffer handle to save socket with memory in memory recovery mode. + AMD_MEM_AUTO_HANDLE, ///< Assign 0x000A00E buffer handle to AmdMemAuto routine. + AMD_MEM_SPD_HANDLE, ///< Assign 0x000A00F buffer handle to AmdMemSpd routine. + AMD_MEM_DATA_HANDLE, ///< Assign 0x000A010 buffer handle to MemData + AMD_MEM_TRAIN_BUFFER_HANDLE, ///< Assign 0x000A011 buffer handle to allocate buffer for training + AMD_MEM_S3_DATA_HANDLE, ///< Assign 0x000A012 buffer handle to special case register for S3 + AMD_MEM_S3_NB_HANDLE, ///< Assign 0x000A013 buffer handle to NB block for S3 + AMD_MEM_S3_MR0_DATA_HANDLE, ///< Assign 0x000A014 buffer handle to MR0 data block for S3 + AMD_UMA_INFO_HANDLE, ///< Assign 0x000A015 buffer handle to be used for Uma information + AMD_DMI_MEM_DEV_INFO_HANDLE, ///< Assign 0x000A016 buffer handle to DMI Type16 17 19 20 information + EVENT_LOG_BUFFER_HANDLE, ///< Assign 0x000A017 buffer handle to Event Log + IDS_CONTROL_HANDLE, ///< Assign 0x000A018 buffer handle to AmdIds routine. + IDS_HDT_OUT_BUFFER_HANDLE, ///< Assign 0x000A019 buffer handle to be used for HDTOUT support. + IDS_CHECK_POINT_PERF_HANDLE, ///< Assign 0x000A01A buffer handle to Performance analysis + AMD_PCIE_COMPLEX_DATA_HANDLE, ///< Assign 0x000A01B buffer handle to be used for PCIe support + AMD_MEM_SYS_DATA_HANDLE, ///< Assign 0x000A01C buffer handle to be used for memory data structure + AMD_GNB_SMU_CONFIG_HANDLE, ///< Assign 0x000A01D buffer handle to be used for GNB SMU configuration + AMD_PP_FUSE_TABLE_HANDLE, ///< Assign 0x000A01E buffer handle to be used for TT fuse table + AMD_GFX_PLATFORM_CONFIG_HANDLE, ///< Assign 0x000A01F buffer handle to be used for Gfx platform configuration + AMD_GNB_TEMP_DATA_HANDLE, ///< Assign 0x000A020 buffer handle for GNB general purpose data block + AMD_MEM_2D_RDQS_HANDLE, ///< Assign 0x000A021 buffer handle for 2D training + AMD_MEM_2D_RD_WR_HANDLE, ///< Assign 0x000A022 buffer handle for 2D Read/Write training + AMD_GNB_IOMMU_SCRATCH_MEM_HANDLE, ///< Assign 0x000A023 buffer handle to be used for GNB IOMMU scratch memory + AMD_MEM_S3_SAVE_HANDLE, ///< Assign 0x000A024 buffer handle for memory data saved right after memory init + AMD_MEM_2D_RDQS_RIM_HANDLE, ///< Assign 0x000A025 buffer handle for 2D training Eye RIM Search + AMD_MEM_2D_RD_WR_RIM_HANDLE, ///< Assign 0x000A026 buffer handle for 2D Read/Write training Eye RIM Search + AMD_CPU_NB_PSTATE_FIXUP_HANDLE, ///< Assign 0x000A027 buffer handle for an NB P-state workaround + AMD_MEM_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000A028 buffer handle for CRAT Memory affinity component structure + AMD_SKIP_MEM_S3_SAVE, ///< Assign 0x000A029 buffer handle for the flag to skip memory S3 save + AMD_SCS_SMU_RAM_INFO, ///< Assign 0x000A02A buffer handle for keeping the result of SMU SCS service + AMD_SCS_HWP0_FREQ, ///< Assign 0x000A02B buffer handler for keeping frequency of HWP0 + AMD_IS_FEATURE_ENABLED, ///< Assign 0x000A02C buffer handle for keeping the result of IsFeatureEnabled + AMD_MEM_DATAEYE_WORK_AREA_HANDLE, ///< Assign 0x000A02D buffer handle for Composite Data Eye Compression Work Area + AMD_GNB_SAMU_PATCH_HANDLE, ///< Assign 0x000A02E buffer handle for Samu patch buffer + AMD_GNB_SAMU_BOOT_CONTROL_HANDLE, ///< Assign 0x000A02F buffer handle for Samu boot control buffer + AMD_GNB_ACP_ENGINE_HANDLE, ///< Assign 0x000A030 buffer handle for GNB ACP engine buffer + AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE, ///< Assign 0x000A031 buffer handle for PMU SRAM Message Block buffer + AMD_GNB_SMU_TABLE_HANDLE, ///< Assign 0x000A032 buffer handle for GNB SMU table buffer + AMD_GNB_CRAT_HSA_TABLE_HANDLE, ///< Assign 0x000A033 buffer handle for GNB CRAT HSA unit table + AMD_GNB_BUILD_OPTIONS_HANDLE, ///< Assign 0x000A034 buffer handle for GNB build options + AMD_S3_FINAL_RESTORE_HANDLE, ///< Assign 0x000A035 buffer handle to AmdS3FinalRestore routine. + AMD_MEM_MISC_HANDLES_START = 0x1000000, ///< Reserve 0x1000000 to 0x1FFFFFF buffer handle + AMD_MEM_MISC_HANDLES_END = 0x1FFFFFF, ///< miscellaneous memory init tasks' buffers. + AMD_HEAP_IN_MAIN_MEMORY_HANDLE = 0x8000000, ///< Assign 0x8000000 to AMD_HEAP_IN_MAIN_MEMORY_HANDLE. + SOCKET_DIE_MAP_HANDLE = 0x534F4B54, ///< 'sokt' + NODE_ID_MAP_HANDLE = 0x4E4F4445, ///< 'node' + HOP_COUNT_TABLE_HANDLE = 0x484F5053, ///< 'hops' + AMD_FCH_RESET_DATA_BLOCK_HANDLE = 0x46434852, ///< 'FCHR' Buffer handle for FCH private data block at InitReset + AMD_FCH_DATA_BLOCK_HANDLE = 0x46434845, ///< 'FCHE' Buffer handle for FCH private data block at InitEnv + IDS_TRAP_TABLE_HANDLE = 0x49524547, ///< 'IREG' Handle for IDS register table + IDS_SAVE_IDTR_HANDLE = 0x49445452, ///< 'IDTR' + IDS_BSC_IDT_HANDLE = 0x42534349, ///< 'BSCI' BSC Idt table + IDS_NV_TO_CMOS_HANDLE = 0x534D4349, ///< 'ICMS' Handle for IDS CMOS save + IDS_GRA_HANDLE = 0x41524749, ///< 'IGRA' Handle for IDS GRA save + IDS_EXTEND_HANDLE = 0x54584549, ///< 'IEXT' Handle for IDS extend module + IDS_TEMP_DATA_HANDLE = 0x504D5459, ///< 'ITMP' Handle for IDS temp data +} AGESA_BUFFER_HANDLE; + + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +HeapManagerInit ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT ALLOCATE_HEAP_PARAMS *AllocateHeapParams, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapLocateBuffer ( + IN OUT LOCATE_HEAP_PTR *LocateHeap, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT64 +HeapGetBaseAddress ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +EventLogInitialization ( + IN AMD_CONFIG_PARAMS *StdHeader + ); +#endif // _HEAP_MANAGER_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Common/AmdFch.h b/src/vendorcode/amd/pi/00630F01/Proc/Common/AmdFch.h new file mode 100644 index 0000000000..469d5af18f --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Common/AmdFch.h @@ -0,0 +1,65 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD FCH Component + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* +***************************************************************************** +* + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + +#ifndef _AMD_FCH_H_ +#define _AMD_FCH_H_ + +typedef AGESA_STATUS FCH_INIT (IN VOID *DataPtr); +typedef VOID FCH_TASK_ENTRY (IN VOID *FchCfg); + + +/// FCH API build options +typedef struct { + FCH_INIT *InitReset; ///< InitReset + FCH_INIT *InitResetConstructor; ///< InitResetConstructor + FCH_INIT *InitEnv; ///< InitEnv + FCH_INIT *InitEnvConstructor; ///< InitEnvConstructor + FCH_INIT *InitMid; ///< InitMid + FCH_INIT *InitMidConstructor; ///< InitMidConstructor + FCH_INIT *InitLate; ///< InitLate + FCH_INIT *InitLateConstructor; ///< InitLateConstructor +} BLDOPT_FCH_FUNCTION; + +#endif diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/AcpiLib.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/AcpiLib.h new file mode 100644 index 0000000000..d18fb124a8 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/AcpiLib.h @@ -0,0 +1,91 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH ACPI lib + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* +***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +**************************************************************************** +*/ +#ifndef _FCH_ACPILIB_H_ +#define _FCH_ACPILIB_H_ +/// +/// RSDP - ACPI 2.0 table RSDP +/// +typedef struct _RSDP_HEADER { + UINT64 Signature; ///< RSDP signature "RSD PTR" + UINT8 CheckSum; ///< checksum of the first 20 bytes + UINT8 OEMID[6]; ///< OEM ID + UINT8 Revision; ///< 0 for APCI 1.0, 2 for ACPI 2.0 + UINT32 RsdtAddress; ///< physical address of RSDT + UINT32 Length; ///< total length of RSDP (including extended part) + UINT64 XsdtAddress; ///< physical address of XSDT + UINT8 ExtendedCheckSum; ///< chechsum of whole table + UINT8 Reserved[3]; ///< Reserved +} RSDP_HEADER; + +/// +/// DESCRIPTION_HEADER - ACPI common table header +/// +typedef struct _DESCRIPTION_HEADER { + UINT32 Signature; ///< ACPI signature (4 ASCII characters) + UINT32 Length; ///< Length of table, in bytes, including header + UINT8 Revision; ///< ACPI Specification minor version # + UINT8 CheckSum; ///< To make sum of entire table == 0 + UINT8 OemId[6]; ///< OEM identification + UINT8 OemTableId[8]; ///< OEM table identification + UINT32 OemRevision; ///< OEM revision number + UINT32 CreatorId; ///< ASL compiler vendor ID + UINT32 CreatorRevision; ///< ASL compiler revision number +} DESCRIPTION_HEADER; + +/// +/// _AcpiRegWrite - ACPI MMIO register R/W structure +/// +typedef struct _ACPI_REG_WRITE { + UINT8 MmioBase; /// MmioBase: Index of Fch block (For instance GPIO_BASE:0x01 SMI_BASE:0x02) + UINT8 MmioReg; /// MmioReg : Register index + UINT8 DataAndMask; /// DataANDMask : AND Register Data + UINT8 DataOrMask; /// DataOrMask : Or Register Data +} ACPI_REG_WRITE; + +VOID* AcpiLocateTable (IN UINT32 Signature); +VOID AcpiSetTableCheckSum (IN VOID *TablePtr); +UINT8 AcpiGetTableCheckSum (IN VOID *TablePtr); +UINT8 GetByteSum (IN VOID *DataPtr, IN UINT32 Length); + +#endif diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchBiosRamUsage.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchBiosRamUsage.h new file mode 100644 index 0000000000..82dd75088a --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchBiosRamUsage.h @@ -0,0 +1,67 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH BIOS Ram usage + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* +***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +**************************************************************************** +*/ +#ifndef _FCH_BIOS_RAM_USAGE_H_ +#define _FCH_BIOS_RAM_USAGE_H_ + +#define RESTORE_MEMORY_CONTROLLER_START 0 +#define XHCI_REGISTER_BAR00 0xD0 +#define XHCI_REGISTER_BAR01 0xD1 +#define XHCI_REGISTER_BAR02 0xD2 +#define XHCI_REGISTER_BAR03 0xD3 +#define XHCI_REGISTER_04H 0xD4 +#define XHCI_REGISTER_0CH 0xD5 +#define XHCI_REGISTER_3CH 0xD6 +#define XHCI1_REGISTER_BAR00 0xE0 +#define XHCI1_REGISTER_BAR01 0xE1 +#define XHCI1_REGISTER_BAR02 0xE2 +#define XHCI1_REGISTER_BAR03 0xE3 +#define XHCI1_REGISTER_04H 0xE4 +#define XHCI1_REGISTER_0CH 0xE5 +#define XHCI1_REGISTER_3CH 0xE6 +#define RTC_WORKAROUND_DATA_START 0xF0 +#define BOOT_TIME_FLAG_SEC 0xF8 +#define BOOT_TIME_FLAG_INT19 0xFC + +#endif + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchCommonCfg.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchCommonCfg.h new file mode 100644 index 0000000000..39a11ba7e6 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchCommonCfg.h @@ -0,0 +1,1282 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH Function Support Definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 302381 $ @e \$Date: 2014-08-29 16:59:06 -0500 (Fri, 29 Aug 2014) $ + * + */ +/********************************************************************************* + * + * Copyright 2008 - 2014 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *********************************************************************************/ +#ifndef _FCH_COMMON_CFG_H_ +#define _FCH_COMMON_CFG_H_ + +#pragma pack (push, 1) + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +//----------------------------------------------------------------------------- + +// +// FCH Component Data Structure Definitions +// + +/// PCI_ADDRESS - PCI access structure +#define PCI_ADDRESS(bus, dev, func, reg) \ + (UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +#define CPUID_FMF 0x80000001ul // Family Model Features information +/// +/// - Byte Register R/W structure +/// +typedef struct _REG8_MASK { + UINT8 RegIndex; /// RegIndex - Reserved + UINT8 AndMask; /// AndMask - Reserved + UINT8 OrMask; /// OrMask - Reserved +} REG8_MASK; + + +/// +/// PCIE Reset Block +/// +typedef enum { + NbBlock, ///< Reset for NB PCIE + FchBlock ///< Reset for FCH GPP +} RESET_BLOCK; + +/// +/// PCIE Reset Operation +/// +typedef enum { + DeassertReset, ///< DeassertRese - Deassert reset + AssertReset ///< AssertReset - Assert reset +} RESET_OP; + + +/// +/// SD structure +/// +typedef struct { + SD_MODE SdConfig; ///< SD Mode configuration + /// @li <b>00</b> - Disabled + /// @li <b>00</b> - AMDA + /// @li <b>01</b> - DMA + /// @li <b>10</b> - PIO + /// + UINT8 SdSpeed; ///< SD Speed + /// @li <b>0</b> - Low speed + /// @li <b>1</b> - High speed + /// + UINT8 SdBitWidth; ///< SD Bit Width + /// @li <b>0</b> - 32BIT clear 23 + /// @li <b>1</b> - 64BIT, set 23,default + /// + UINT32 SdSsid; ///< SD Subsystem ID + SD_CLOCK_CONTROL SdClockControl; ///< SD Clock Control + BOOLEAN SdClockMultiplier; ///< SD Clock Multiplier enable/disable + UINT8 SdReTuningMode; ///< SD Re-tuning modes select + /// @li <b>0</b> - mode 1 + /// @li <b>1</b> - mode 2 + /// @li <b>2</b> - mode 3 + UINT8 SdHostControllerVersion; ///< SD controller Version + /// @li <b>1</b> - SD 2.0 + /// @li <b>2</b> - SD 3.0 + UINT8 SdrCapabilities; ///< SDR Capability mode select + /// @li <b>00</b> - SDR25/15 + /// @li <b>01</b> - SDR50 + /// @li <b>11</b> - SDR104 + UINT8 SdSlotType; ///< SDR Slot Type select + /// @li <b>00</b> - Removable Card Slot + /// @li <b>01</b> - Embedded Slot for One Device + /// @li <b>10</b> - Shared Bus Slot +} FCH_SD; + +/// +/// CODEC_ENTRY - Fch HD Audio OEM Codec structure +/// +typedef struct _CODEC_ENTRY { + UINT8 Nid; /// Nid - Reserved + UINT32 Byte40; /// Byte40 - Reserved +} CODEC_ENTRY; + +/// +/// CODEC_TBL_LIST - Fch HD Audio Codec table list +/// +typedef struct _CODEC_TBL_LIST { + UINT32 CodecId; /// CodecID - Codec ID + CONST CODEC_ENTRY* CodecTablePtr; /// CodecTablePtr - Codec table pointer +} CODEC_TBL_LIST; + +/// +/// AZALIA_PIN - HID Azalia or GPIO define structure. +/// +typedef struct _AZALIA_PIN { + UINT8 AzaliaSdin0; ///< AzaliaSdin0 + /// @par + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin1; ///< AzaliaSdin1 + /// @par + /// SDIN1 is define at BIT2 & BIT3 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin2; ///< AzaliaSdin2 + /// @par + /// SDIN2 is define at BIT4 & BIT5 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin3; ///< AzaliaSdin3 + /// @par + /// SDIN3 is define at BIT6 & BIT7 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin +} AZALIA_PIN; + +/// +/// Azalia structure +/// +typedef struct { + HDA_CONFIG AzaliaEnable; ///< AzaliaEnable - Azalia function configuration + BOOLEAN AzaliaMsiEnable; ///< AzaliaMsiEnable - Azalia MSI capability + UINT32 AzaliaSsid; ///< AzaliaSsid - Azalia Subsystem ID + UINT8 AzaliaPinCfg; ///< AzaliaPinCfg - Azalia Controller SDIN pin Configuration + /// @par + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaFrontPanel; ///< AzaliaFrontPanel - Azalia Controller Front Panel Configuration + /// @par + /// Support Front Panel configuration + /// @li <b>0</b> - Auto + /// @li <b>1</b> - disable + /// @li <b>2</b> - enable + + UINT8 FrontPanelDetected; ///< FrontPanelDetected - Force Azalia Controller Front Panel Configuration + /// @par + /// Force Front Panel configuration + /// @li <b>0</b> - Not Detected + /// @li <b>1</b> - Detected + + UINT8 AzaliaSnoop; ///< AzaliaSnoop - Azalia Controller Snoop feature Configuration + /// @par + /// Azalia Controller Snoop feature Configuration + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaDummy; /// AzaliaDummy - Reserved */ + + AZALIA_PIN AzaliaConfig; /// AzaliaConfig - Azaliz Pin Configuration + +/// +/// AZOEMTBL - Azalia Controller OEM Codec Table Pointer +/// + CONST CODEC_TBL_LIST *AzaliaOemCodecTablePtr; /// AzaliaOemCodecTablePtr - Oem Azalia Codec Table Pointer + +/// +/// AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer +/// + CONST VOID *AzaliaOemFpCodecTablePtr; /// AzaliaOemFpCodecTablePtr - Oem Front Panel Codec Table Pointer +} FCH_AZALIA; + +/// +/// _SPI_DEVICE_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_DEVICE_PROFILE { + UINT32 JEDEC_ID; /// JEDEC ID + UINT32 RomSize; /// ROM Size + UINT32 SectorSize; /// Sector Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed + UINT8 QeReadRegister; /// QE Read Register + UINT8 QeWriteRegister; /// QE Write Register + UINT8 QeOperateSize; /// QE Operate Size 1byte/2bytes + UINT16 QeLocation; // QE Location in the register +} SPI_DEVICE_PROFILE; + +/// +/// _SPI_CONTROLLER_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_CONTROLLER_PROFILE { +// UINT32 SPI_CONTROLLER_ID; /// SPI Controller ID + UINT16 FifoSize; /// FIFO Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed +} SPI_CONTROLLER_PROFILE; + +/// +/// SPI structure +/// +typedef struct { + BOOLEAN LpcMsiEnable; ///< LPC MSI capability + UINT32 LpcSsid; ///< LPC Subsystem ID + UINT32 RomBaseAddress; ///< SpiRomBaseAddress + /// @par + /// SPI ROM BASE Address + /// + UINT8 SpiSpeed; ///< SpiSpeed - Spi Frequency + /// @par + /// SPI Speed [1.0] - the clock speed for non-fast read command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiFastSpeed; ///< FastSpeed - Spi Fast Speed feature + /// SPIFastSpeed [1.0] - the clock speed for Fast Speed Feature + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 WriteSpeed; ///< WriteSpeed - Spi Write Speed + /// @par + /// WriteSpeed [1.0] - the clock speed for Spi write command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiMode; ///< SpiMode - Spi Mode Setting + /// @par + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< AutoMode - Spi Auto Mode + /// @par + /// SPI Auto Mode + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + /// + UINT8 SpiBurstWrite; ///< SpiBurstWrite - Spi Burst Write Mode + /// @par + /// SPI Burst Write + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + BOOLEAN LpcClk0; ///< Lclk0En - LPCCLK0 + /// @par + /// LPC Clock 0 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol + BOOLEAN LpcClk1; ///< Lclk1En - LPCCLK1 + /// @par + /// LPC Clock 1 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; /// + SPI_DEVICE_PROFILE SpiDeviceProfile; /// Spi Device Profile +} FCH_SPI; + + +/// +/// IDE structure +/// +typedef struct { + BOOLEAN IdeEnable; ///< IDE function switch + BOOLEAN IdeMsiEnable; ///< IDE MSI capability + UINT32 IdeSsid; ///< IDE controller Subsystem ID +} FCH_IDE; + +/// +/// IR Structure +/// +typedef struct { + IR_CONFIG IrConfig; ///< IrConfig + UINT8 IrPinControl; ///< IrPinControl +} FCH_IR; + + +/// +/// PCI Bridge Structure +/// +typedef struct { + BOOLEAN PcibMsiEnable; ///< PCI-PCI Bridge MSI capability + UINT32 PcibSsid; ///< PCI-PCI Bridge Subsystem ID + UINT8 PciClks; ///< 33MHz PCICLK0/1/2/3 Enable, bits [0:3] used + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT16 PcibClkStopOverride; ///< PCIB_CLK_Stop Override + BOOLEAN PcibClockRun; ///< Enable the auto clkrun functionality + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// +} FCH_PCIB; + + +/// +/// - SATA Phy setting structure +/// +typedef struct _SATA_PHY_SETTING { + UINT16 PhyCoreControlWord; /// PhyCoreControlWord - Reserved + UINT32 PhyFineTuneDword; /// PhyFineTuneDword - Reserved +} SATA_PHY_SETTING; + +/// +/// SATA main setting structure +/// +typedef struct _SATA_ST { + UINT8 SataModeReg; ///< SataModeReg - Sata Controller Mode + BOOLEAN SataEnable; ///< SataEnable - Sata Controller Function + /// @par + /// Sata Controller + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 Sata6AhciCap; ///< Sata6AhciCap - Reserved */ + BOOLEAN SataSetMaxGen2; ///< SataSetMaxGen2 - Set Sata Max Gen2 mode + /// @par + /// Sata Controller Set to Max Gen2 mode + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN IdeEnable; ///< IdeEnable - Hidden IDE + /// @par + /// Sata IDE Controller Combined Mode + /// Enable - SATA controller has control over Port0 through Port3, + /// IDE controller has control over Port4 and Port7. + /// Disable - SATA controller has full control of all 8 Ports + /// when operating in non-IDE mode. + /// @li <b>0</b> - enable + /// @li <b>1</b> - disable + /// + UINT8 SataClkMode; /// SataClkMode - Reserved +} SATA_ST; + +/// +/// SATA_PORT_ST - SATA PORT structure +/// +typedef struct _SATA_PORT_ST { + UINT8 SataPortReg; ///< SATA Port bit map - bits[0:7] for ports 0 ~ 7 + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN Port0; ///< PORT0 - 0:disable, 1:enable + BOOLEAN Port1; ///< PORT1 - 0:disable, 1:enable + BOOLEAN Port2; ///< PORT2 - 0:disable, 1:enable + BOOLEAN Port3; ///< PORT3 - 0:disable, 1:enable + BOOLEAN Port4; ///< PORT4 - 0:disable, 1:enable + BOOLEAN Port5; ///< PORT5 - 0:disable, 1:enable + BOOLEAN Port6; ///< PORT6 - 0:disable, 1:enable + BOOLEAN Port7; ///< PORT7 - 0:disable, 1:enable +} SATA_PORT_ST; + +/// +///< _SATA_PORT_MD - Force Each PORT to GEN1/GEN2 mode +/// +typedef struct _SATA_PORT_MD { + UINT16 SataPortMode; ///< SATA Port GEN1/GEN2 mode bit map - bits [0:15] for ports 0 ~ 7 + UINT8 Port0; ///< PORT0 - set BIT0 to GEN1, BIT1 - PORT0 set to GEN2 + UINT8 Port1; ///< PORT1 - set BIT2 to GEN1, BIT3 - PORT1 set to GEN2 + UINT8 Port2; ///< PORT2 - set BIT4 to GEN1, BIT5 - PORT2 set to GEN2 + UINT8 Port3; ///< PORT3 - set BIT6 to GEN1, BIT7 - PORT3 set to GEN2 + UINT8 Port4; ///< PORT4 - set BIT8 to GEN1, BIT9 - PORT4 set to GEN2 + UINT8 Port5; ///< PORT5 - set BIT10 to GEN1, BIT11 - PORT5 set to GEN2 + UINT8 Port6; ///< PORT6 - set BIT12 to GEN1, BIT13 - PORT6 set to GEN2 + UINT8 Port7; ///< PORT7 - set BIT14 to GEN1, BIT15 - PORT7 set to GEN2 +} SATA_PORT_MD; +/// +/// SATA structure +/// +typedef struct { + BOOLEAN SataMsiEnable; ///< SATA MSI capability + UINT32 SataIdeSsid; ///< SATA IDE mode SSID + UINT32 SataRaidSsid; ///< SATA RAID mode SSID + UINT32 SataRaid5Ssid; ///< SATA RAID 5 mode SSID + UINT32 SataAhciSsid; ///< SATA AHCI mode SSID + + SATA_ST SataMode; /// SataMode - Reserved + SATA_CLASS SataClass; ///< SataClass - SATA Controller mode [2:0] + UINT8 SataIdeMode; ///< SataIdeMode - Sata IDE Controller mode + /// @par + /// @li <b>0</b> - Legacy IDE mode + /// @li <b>1</b> - Native IDE mode + /// + UINT8 SataDisUnusedIdePChannel; ///< SataDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataDisUnusedIdeSChannel; ///< SataDisUnusedIdeSChannel - Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdePChannel; ///< IdeDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdeSChannel; ///< IdeDisUnusedIdeSChannel-Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataOptionReserved; /// SataOptionReserved - Reserved + + SATA_PORT_ST SataEspPort; ///< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:) + + SATA_PORT_ST SataPortPower; ///< SataPortPower - Port Power configuration + + SATA_PORT_MD SataPortMd; ///< SataPortMd - Port Mode + + UINT8 SataAggrLinkPmCap; /// SataAggrLinkPmCap - 0:OFF 1:ON + UINT8 SataPortMultCap; /// SataPortMultCap - 0:OFF 1:ON + UINT8 SataClkAutoOff; /// SataClkAutoOff - AutoClockOff 0:Disabled, 1:Enabled + UINT8 SataPscCap; /// SataPscCap 1:Enable PSC, 0:Disable PSC capability + UINT8 BiosOsHandOff; /// BiosOsHandOff - Reserved + UINT8 SataFisBasedSwitching; /// SataFisBasedSwitching - Reserved + UINT8 SataCccSupport; /// SataCccSupport - Reserved + UINT8 SataSscCap; /// SataSscCap - 1:Enable, 0:Disable SSC capability + UINT8 SataMsiCapability; /// SataMsiCapability 0:Hidden 1:Visible + UINT8 SataForceRaid; /// SataForceRaid 0:No function 1:Force RAID + UINT8 SataInternal100Spread; /// SataInternal100Spread - Reserved + UINT8 SataDebugDummy; /// SataDebugDummy - Reserved + UINT8 SataTargetSupport8Device; /// SataTargetSupport8Device - Reserved + UINT8 SataDisableGenericMode; /// SataDisableGenericMode - Reserved + BOOLEAN SataAhciEnclosureManagement; /// SataAhciEnclosureManagement - Reserved + UINT8 SataSgpio0; /// SataSgpio0 - Reserved + UINT8 SataSgpio1; /// SataSgpio1 - Reserved + UINT8 SataPhyPllShutDown; /// SataPhyPllShutDown - Reserved + BOOLEAN SataHotRemovalEnh; /// SataHotRemovalEnh - Reserved + + SATA_PORT_ST SataHotRemovalEnhPort; ///< SataHotRemovalEnhPort - Hot Remove + + BOOLEAN SataOobDetectionEnh; /// SataOobDetectionEnh - TRUE + BOOLEAN SataPowerSavingEnh; /// SataPowerSavingEnh - TRUE + UINT8 SataMemoryPowerSaving; /// SataMemoryPowerSaving - 0-3 Default [3] + BOOLEAN SataRasSupport; /// SataRasSupport - Support RAS function TRUE: Enable FALSE: Disable + BOOLEAN SataAhciDisPrefetchFunction; /// SataAhciDisPrefetchFunction - Disable AHCI Prefetch Function Support + BOOLEAN SataDevSlpPort0; /// SataDevSlpPort0 - Reserved + BOOLEAN SataDevSlpPort1; /// SataDevSlpPort1 - Reserved + UINT32 TempMmio; /// TempMmio - Reserved +} FCH_SATA; + + +// +// IMC Message Register Software Interface +// +#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3) + +#define MSG_SYS_TO_IMC 0x80 +#define Fun_80 0x80 +#define Fun_81 0x81 +#define Fun_82 0x82 +#define Fun_83 0x83 +#define Fun_84 0x84 +#define Fun_85 0x85 +#define Fun_86 0x86 +#define Fun_87 0x87 +#define Fun_88 0x88 +#define Fun_89 0x89 +#define Fun_90 0x90 +#define MSG_IMC_TO_SYS 0x81 +#define MSG_REG0 0x82 +#define MSG_REG1 0x83 +#define MSG_REG2 0x84 +#define MSG_REG3 0x85 +#define MSG_REG4 0x86 +#define MSG_REG5 0x87 +#define MSG_REG6 0x88 +#define MSG_REG7 0x89 +#define MSG_REG8 0x8A +#define MSG_REG9 0x8B +#define MSG_REGA 0x8C +#define MSG_REGB 0x8D +#define MSG_REGC 0x8E +#define MSG_REGD 0x8F + +#define DISABLED 0 +#define ENABLED 1 + + + +/// +/// EC structure +/// +typedef struct _FCH_EC { + UINT8 MsgFun81Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone0MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone0MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone0MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone0MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone0MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone0MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone0MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +// EC LDN9 function 81 zone 1 +// + UINT8 MsgFun81Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone1MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone1MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone1MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone1MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone1MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone1MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone1MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 2 +// + UINT8 MsgFun81Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone2MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone2MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone2MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone2MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone2MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone2MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone2MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 3 +// + UINT8 MsgFun81Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone3MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone3MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone3MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone3MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone3MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone3MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone3MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 83 zone 0 +// + UINT8 MsgFun83Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone0MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone0MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone0MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone0MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone0MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone0MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone0MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone0MsgRegA; ///<_CRT + UINT8 MsgFun83Zone0MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 1 +// + UINT8 MsgFun83Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone1MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone1MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone1MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone1MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone1MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone1MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone1MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone1MsgRegA; ///<_CRT + UINT8 MsgFun83Zone1MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 2 +// + UINT8 MsgFun83Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone2MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone2MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone2MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone2MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone2MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone2MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone2MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone2MsgRegA; ///<_CRT + UINT8 MsgFun83Zone2MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 3 +// + UINT8 MsgFun83Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone3MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone3MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone3MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone3MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone3MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone3MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone3MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone3MsgRegA; ///<_CRT + UINT8 MsgFun83Zone3MsgRegB; ///<_PSV +// +//EC LDN9 function 85 zone 0 +// + UINT8 MsgFun85Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 1 +// + UINT8 MsgFun85Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 2 +// + UINT8 MsgFun85Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 3 +// + UINT8 MsgFun85Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 89 TEMPIN channel 0 +// + UINT8 MsgFun89Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 1 +// + UINT8 MsgFun89Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 2 +// + UINT8 MsgFun89Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 3 +// + UINT8 MsgFun89Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgRegA; ///<Mode bit 0-7 +// +// FLAG for Fun83/85/89 support +// + UINT16 IMCFUNSupportBitMap; ///< Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3; +} FCH_EC; + +/// +/// IMC structure +/// +typedef struct _FCH_IMC { + UINT8 ImcEnable; ///< ImcEnable - IMC Enable + UINT8 ImcEnabled; ///< ImcEnabled - IMC Enable + UINT8 ImcSureBootTimer; ///< ImcSureBootTimer - IMc SureBootTimer function + FCH_EC EcStruct; ///< EC structure + UINT8 ImcEnableOverWrite; ///< OverWrite IMC with the EC structure + /// @li <b>00</b> - by default strapping + /// @li <b>01</b> - enable + /// @li <b>10</b> - disable + /// +} FCH_IMC; + + +/// +/// Hpet structure +/// +typedef struct { + BOOLEAN HpetEnable; ///< HPET function switch + + BOOLEAN HpetMsiDis; ///< HpetMsiDis - South Bridge HPET MSI Configuration + /// @par + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT32 HpetBase; ///< HpetBase + /// @par + /// HPET Base address +} FCH_HPET; + + +/// +/// GCPU related parameters +/// +typedef struct { + UINT8 AcDcMsg; ///< Send a message to CPU to indicate the power mode (AC vs battery) + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 TimerTickTrack; ///< Send a message to CPU to indicate the latest periodic timer interval + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 ClockInterruptTag; ///< Mark the periodic timer interrupt + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 OhciTrafficHanding; ///< Cause CPU to break out from C state when USB OHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 EhciTrafficHanding; ///< Cause CPU to break out from C state when USB EHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCMultiCore; ///< Track of CPU C state by monitoring each core's C state message + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCStage; ///< Enable the FCH C state coordination logic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable +} FCH_GCPU; + + +/// +/// Timer +/// +typedef struct { + BOOLEAN Enable; ///< Whether to register timer SMI in POST + BOOLEAN StartNow; ///< Whether to start the SMI immediately during registration + UINT16 CycleDuration; ///< [14:0] - Actual cycle duration = CycleDuration + 1 +} TIMER_SMI; + +/// +/// CS support +/// +typedef struct { + BOOLEAN FchCsD3Cold; ///< FCH Cs D3 Cold function + BOOLEAN FchCsHwReduced; ///< FCH Cs hardware reduced ACPI flag + BOOLEAN FchCsPwrBtn; ///< FCH Cs Power Button function + BOOLEAN FchCsAcDc; ///< FCH Cs AcDc function + BOOLEAN AsfNfcEnable; ///< FCH Cs NFC function + UINT8 AsfNfcInterruptPin; ///< NFC Interrupt pin define + UINT8 AsfNfcRegPuPin; ///< NFC RegPu pin define + UINT8 AsfNfcWakePin; ///< NFC Wake Pin define + UINT8 PowerButtonGpe; ///< GPE# used by Power Button device + UINT8 AcDcTimerGpe; ///< GPE# used by Timer device +} FCH_CS; + + +/// +/// MISC structure +/// +typedef struct { + BOOLEAN NativePcieSupport; /// PCIe NativePcieSupport - Debug function. 1:Enabled, 0:Disabled + BOOLEAN S3Resume; /// S3Resume - Flag of ACPI S3 Resume. + BOOLEAN RebootRequired; /// RebootRequired - Flag of Reboot system is required. + UINT8 FchVariant; /// FchVariant - FCH Variant value. + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + TIMER_SMI LongTimer; ///< Long Timer SMI + TIMER_SMI ShortTimer; ///< Short Timer SMI + UINT32 FchCpuId; ///< Saving CpuId for FCH Module. + BOOLEAN NoneSioKbcSupport; ///< NoneSioKbcSupport - No KBC/SIO controller ( Turn on Inchip KBC emulation function ) + FCH_CS FchCsSupport; ///< FCH Cs function structure +} FCH_MISC; + + +/// +/// SMBus structure +/// +typedef struct { + UINT32 SmbusSsid; ///< SMBUS controller Subsystem ID +} FCH_SMBUS; + + +/// +/// Acpi structure +/// +typedef struct { + UINT16 Smbus0BaseAddress; ///< Smbus0BaseAddress + /// @par + /// Smbus BASE Address + /// + UINT16 Smbus1BaseAddress; ///< Smbus1BaseAddress + /// @par + /// Smbus1 (ASF) BASE Address + /// + UINT16 SioPmeBaseAddress; ///< SioPmeBaseAddress + /// @par + /// SIO PME BASE Address + /// + UINT32 WatchDogTimerBase; ///< WatchDogTimerBase + /// @par + /// Watch Dog Timer Address + /// + UINT16 AcpiPm1EvtBlkAddr; ///< AcpiPm1EvtBlkAddr + /// @par + /// ACPI PM1 event block Address + /// + UINT16 AcpiPm1CntBlkAddr; ///< AcpiPm1CntBlkAddr + /// @par + /// ACPI PM1 Control block Address + /// + UINT16 AcpiPmTmrBlkAddr; ///< AcpiPmTmrBlkAddr + /// @par + /// ACPI PM timer block Address + /// + UINT16 CpuControlBlkAddr; ///< CpuControlBlkAddr + /// @par + /// ACPI CPU control block Address + /// + UINT16 AcpiGpe0BlkAddr; ///< AcpiGpe0BlkAddr + /// @par + /// ACPI GPE0 block Address + /// + UINT16 SmiCmdPortAddr; ///< SmiCmdPortAddr + /// @par + /// SMI command port Address + /// + UINT16 AcpiPmaCntBlkAddr; ///< AcpiPmaCntBlkAddr + /// @par + /// ACPI PMA Control block Address + /// + BOOLEAN AnyHt200MhzLink; ///< AnyHt200MhzLink + /// @par + /// HT Link Speed on 200MHz option for each CPU specific LDTSTP# (Force enable) + /// + BOOLEAN SpreadSpectrum; ///< SpreadSpectrum + /// @par + /// Spread Spectrum function + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + POWER_FAIL PwrFailShadow; ///< PwrFailShadow = PM_Reg: 5Bh [3:0] + /// @par + /// @li <b>00</b> - Always off + /// @li <b>01</b> - Always on + /// @li <b>11</b> - Use previous + /// + UINT8 StressResetMode; ///< StressResetMode 01-10 + /// @li <b>00</b> - Disabed + /// @li <b>01</b> - Io Write 0x64 with 0xfe + /// @li <b>10</b> - Io Write 0xcf9 with 0x06 + /// @li <b>11</b> - Io Write 0xcf9 with 0x0e + /// + BOOLEAN MtC1eEnable; /// MtC1eEnable - Enable MtC1e + VOID* OemProgrammingTablePtr; /// Pointer of ACPI OEM table + UINT8 SpreadSpectrumOptions; /// SpreadSpectrumOptions - Spread Spectrum Option + BOOLEAN PwrDownDisp2ClkPcieR; /// Power down DISP2_CLK and PCIE_RCLK_Output for power savings +} FCH_ACPI; + + +/// +/// HWM temp parameter structure +/// +typedef struct _FCH_HWM_TEMP_PAR { + UINT16 At; ///< At + UINT16 Ct; ///< Ct + UINT8 Mode; ///< Mode BIT0:HiRatio BIT1:HiCurrent +} FCH_HWM_TEMP_PAR; + +/// +/// HWM Current structure +/// +typedef struct _FCH_HWM_CUR { + UINT16 FanSpeed[5]; ///< FanSpeed - fan Speed + UINT16 Temperature[5]; ///< Temperature - temperature + UINT16 Voltage[8]; ///< Voltage - voltage +} FCH_HWM_CUR; + +/// +/// HWM fan control structure +/// +typedef struct _FCH_HWM_FAN_CTR { + UINT8 InputControlReg00; /// Fan Input Control register, PM2 offset [0:4]0 + UINT8 ControlReg01; /// Fan control register, PM2 offset [0:4]1 + UINT8 FreqReg02; /// Fan frequency register, PM2 offset [0:4]2 + UINT8 LowDutyReg03; /// Low Duty register, PM2 offset [0:4]3 + UINT8 MedDutyReg04; /// Med Duty register, PM2 offset [0:4]4 + UINT8 MultiplierReg05; /// Multiplier register, PM2 offset [0:4]5 + UINT16 LowTempReg06; /// Low Temp register, PM2 offset [0:4]6 + UINT16 MedTempReg08; /// Med Temp register, PM2 offset [0:4]8 + UINT16 HighTempReg0A; /// High Temp register, PM2 offset [0:4]A + UINT8 LinearRangeReg0C; /// Linear Range register, PM2 offset [0:4]C + UINT8 LinearHoldCountReg0D; /// Linear Hold Count register, PM2 offset [0:4]D +} FCH_HWM_FAN_CTR; + +/// +/// Hwm structure +/// +typedef struct _FCH_HWM { + UINT8 HwMonitorEnable; ///< HwMonitorEnable + UINT32 HwmControl; ///< hwmControl + /// @par + /// HWM control configuration + /// @li <b>0</b> - HWM is Enabled + /// @li <b>1</b> - IMC is Enabled + /// + UINT8 FanSampleFreqDiv; ///< Sampling rate of Fan Speed + /// @li <b>00</b> - Base(22.5KHz) + /// @li <b>01</b> - Base(22.5KHz)/2 + /// @li <b>10</b> - Base(22.5KHz)/4 + /// @li <b>11</b> - Base(22.5KHz)/8 + /// + UINT8 HwmFchtsiAutoPoll; ///< TSI Auto Polling + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 HwmFchtsiAutoPollStarted; ///< HwmSbtsiAutoPollStarted + UINT8 FanLinearEnhanceEn; ///< FanLinearEnhanceEn + UINT8 FanLinearHoldFix; ///< FanLinearHoldFix + UINT8 FanLinearRangeOutLimit; ///< FanLinearRangeOutLimit + UINT16 HwmCalibrationFactor; /// Calibration Factor + FCH_HWM_CUR HwmCurrent; /// HWM Current structure + FCH_HWM_CUR HwmCurrentRaw; /// HWM Current Raw structure + FCH_HWM_TEMP_PAR HwmTempPar[5]; /// HWM Temp parameter structure + FCH_HWM_FAN_CTR HwmFanControl[5]; /// HWM Fan Control structure + FCH_HWM_FAN_CTR HwmFanControlCooked[5]; /// HWM Fan Control structure +} FCH_HWM; + + +/// +/// Gec structure +/// +typedef struct { + BOOLEAN GecEnable; ///< GecEnable - GEC function switch + UINT8 GecPhyStatus; /// GEC PHY Status + UINT8 GecPowerPolicy; /// GEC Power Policy + /// @li <b>00</b> - GEC is powered down in S3 and S5 + /// @li <b>01</b> - GEC is powered down only in S5 + /// @li <b>10</b> - GEC is powered down only in S3 + /// @li <b>11</b> - GEC is never powered down + /// + UINT8 GecDebugBus; /// GEC Debug Bus + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT32 GecShadowRomBase; ///< GecShadowRomBase + /// @par + /// GEC (NIC) SHADOWROM BASE Address + /// + VOID *PtrDynamicGecRomAddress; /// Pointer of Dynamic GEC ROM Address +} FCH_GEC; + + +/// +/// _ABTblEntry - AB link register table R/W structure +/// +typedef struct _AB_TBL_ENTRY { + UINT8 RegType; /// RegType : AB Register Type (ABCFG, AXCFG and so on) + UINT32 RegIndex; /// RegIndex : AB Register Index + UINT32 RegMask; /// RegMask : AB Register Mask + UINT32 RegData; /// RegData : AB Register Data +} AB_TBL_ENTRY; + +/// +/// AB structure +/// +typedef struct { + BOOLEAN AbMsiEnable; ///< ABlink MSI capability + UINT8 ALinkClkGateOff; /// Alink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 BLinkClkGateOff; /// Blink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 AbClockGating; /// AB Clock Gating - 0:disable, 1:enable *KR + UINT8 GppClockGating; /// GPP Clock Gating - 0:disable, 1:enable + UINT8 UmiL1TimerOverride; /// UMI L1 inactivity timer overwrite value + UINT8 UmiLinkWidth; /// UMI Link Width + UINT8 UmiDynamicSpeedChange; /// UMI Dynamic Speed Change - 0:disable, 1:enable + UINT8 PcieRefClockOverClocking; /// PCIe Ref Clock OverClocking value + UINT8 UmiGppTxDriverStrength; /// UMI GPP TX Driver Strength + BOOLEAN NbSbGen2; /// UMI link Gen2 - 0:Gen1, 1:Gen2 + UINT8 PcieOrderRule; /// PCIe Order Rule - 0:disable, 1:enable *KR AB Posted Pass Non-Posted + UINT8 SlowSpeedAbLinkClock; /// Slow Speed AB Link Clock - 0:disable, 1:enable *KR + BOOLEAN ResetCpuOnSyncFlood; /// Reset Cpu On Sync Flood - 0:disable, 1:enable *KR + BOOLEAN AbDmaMemoryWrtie3264B; /// AB DMA Memory Write 32/64 BYTE Support *KR only + BOOLEAN AbMemoryPowerSaving; /// AB Memory Power Saving *KR only + BOOLEAN SbgDmaMemoryWrtie3264ByteCount; /// SBG DMA Memory Write 32/64 BYTE Count Support *KR only + BOOLEAN SbgMemoryPowerSaving; /// SBG Memory Power Saving *KR only +} FCH_AB; + + +/** + * PCIE_CAP_ID - PCIe Cap ID + * + */ +#define PCIE_CAP_ID 0x10 + +/// +/// FCH_GPP_PORT_CONFIG - Fch GPP port config structure +/// +typedef struct { + BOOLEAN PortPresent; ///< Port connection + /// @par + /// @li <b>0</b> - Port doesn't have slot. No need to train the link + /// @li <b>1</b> - Port connection defined and needs to be trained + /// + BOOLEAN PortDetected; ///< Link training status + /// @par + /// @li <b>0</b> - EP not detected + /// @li <b>1</b> - EP detected + /// + BOOLEAN PortIsGen2; ///< Port link speed configuration + /// @par + /// @li <b>00</b> - Auto + /// @li <b>01</b> - Forced GEN1 + /// @li <b>10</b> - Forced GEN2 + /// @li <b>11</b> - Reserved + /// + BOOLEAN PortHotPlug; ///< Support hot plug? + /// @par + /// @li <b>0</b> - No support + /// @li <b>1</b> - support + /// + UINT8 PortMisc; /// PortMisc - Reserved +} FCH_GPP_PORT_CONFIG; + +/// +/// GPP structure +/// +typedef struct { + FCH_GPP_PORT_CONFIG PortCfg[4]; /// GPP port configuration structure + GPP_LINKMODE GppLinkConfig; ///< GppLinkConfig - PCIE_GPP_Enable[3:0] + /// @li <b>0000</b> - Port ABCD -> 4:0:0:0 + /// @li <b>0010</b> - Port ABCD -> 2:2:0:0 + /// @li <b>0011</b> - Port ABCD -> 2:1:1:0 + /// @li <b>0100</b> - Port ABCD -> 1:1:1:1 + /// + BOOLEAN GppFunctionEnable; ///< GPP Function - 0:disable, 1:enable + BOOLEAN GppToggleReset; ///< Toggle GPP core reset + UINT8 GppHotPlugGeventNum; ///< Hotplug GEVENT # - valid value 0-31 + UINT8 GppFoundGfxDev; ///< Gpp Found Gfx Device + /// @li <b>0</b> - Not found + /// @li <b>1</b> - Found + /// + BOOLEAN GppGen2; ///< GPP Gen2 - 0:disable, 1:enable + UINT8 GppGen2Strap; ///< GPP Gen2 Strap - 0:disable, 1:enable, FCH itself uses this + BOOLEAN GppMemWrImprove; ///< GPP Memory Write Improve - 0:disable, 1:enable + BOOLEAN GppUnhidePorts; ///< GPP Unhide Ports - 0:disable, 1:enable + UINT8 GppPortAspm; ///< GppPortAspm - ASPM state for all GPP ports + /// @li <b>01</b> - Disabled + /// @li <b>01</b> - L0s + /// @li <b>10</b> - L1 + /// @li <b>11</b> - L0s + L1 + /// + BOOLEAN GppLaneReversal; ///< GPP Lane Reversal - 0:disable, 1:enable + BOOLEAN GppPhyPllPowerDown; ///< GPP PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN GppDynamicPowerSaving; ///< GPP Dynamic Power Saving - 0:disable, 1:enable + BOOLEAN PcieAer; ///< PcieAer - Advanced Error Report: 0/1-disable/enable + BOOLEAN PcieRas; ///< PCIe RAS - 0:disable, 1:enable + BOOLEAN PcieCompliance; ///< PCIe Compliance - 0:disable, 1:enable + BOOLEAN PcieSoftwareDownGrade; ///< PCIe Software Down Grade + BOOLEAN UmiPhyPllPowerDown; ///< UMI PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN SerialDebugBusEnable; ///< Serial Debug Bus Enable + UINT8 GppHardwareDownGrade; ///< GppHardwareDownGrade - Gpp HW Down Grade function 0:Disable, 1-4: portA-D + UINT8 GppL1ImmediateAck; ///< GppL1ImmediateAck - Gpp L1 Immediate ACK 0: enable, 1: disable + BOOLEAN NewGppAlgorithm; ///< NewGppAlgorithm - New GPP procedure + UINT8 HotPlugPortsStatus; ///< HotPlugPortsStatus - Save Hot-Plug Ports Status + UINT8 FailPortsStatus; ///< FailPortsStatus - Save Failure Ports Status + UINT8 GppPortMinPollingTime; ///< GppPortMinPollingTime - Min. Polling time for Gpp Port Training + BOOLEAN IsCapsuleMode; ///< IsCapsuleMode - Support Capsule Mode in FCH +} FCH_GPP; + + +/// +/// FCH USB sturcture +/// +typedef struct { + BOOLEAN Ohci1Enable; ///< OHCI1 controller enable + BOOLEAN Ohci2Enable; ///< OHCI2 controller enable + BOOLEAN Ohci3Enable; ///< OHCI3 controller enable + BOOLEAN Ohci4Enable; ///< OHCI4 controller enable + BOOLEAN Ehci1Enable; ///< EHCI1 controller enable + BOOLEAN Ehci2Enable; ///< EHCI2 controller enable + BOOLEAN Ehci3Enable; ///< EHCI3 controller enable + BOOLEAN Xhci0Enable; ///< XHCI0 controller enable + BOOLEAN Xhci1Enable; ///< XHCI1 controller enable + BOOLEAN UsbMsiEnable; ///< USB MSI capability + UINT32 OhciSsid; ///< OHCI SSID + UINT32 Ohci4Ssid; ///< OHCI 4 SSID + UINT32 EhciSsid; ///< EHCI SSID + UINT32 XhciSsid; ///< XHCI SSID + BOOLEAN UsbPhyPowerDown; ///< USB PHY Power Down - 0:disable, 1:enable + UINT32 UserDefineXhciRomAddr; ///< XHCI ROM address define by platform BIOS + UINT8 Ehci1Phy[5]; ///< EHCI1 USB PHY Driving Strength value table + UINT8 Ehci2Phy[5]; ///< EHCI2 USB PHY Driving Strength value table + UINT8 Ehci3Phy[4]; ///< EHCI3 USB PHY Driving Strength value table + UINT8 Xhci20Phy[4]; ///< XHCI USB 2.0 PHY Driving Strength value table + UINT8 Ehci1DebugPortSel; ///< DebugPortSel for Ehci1 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci2DebugPortSel; ///< DebugPortSel for Ehci2 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci3DebugPortSel; ///< DebugPortSel for Ehci3 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 +} FCH_USB; + + +/// Private: FCH_DATA_BLOCK_RESET +typedef struct _FCH_RESET_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + FCH_RESET_INTERFACE FchReset; ///< Reset interface + + UINT8 FastSpeed; ///< SPI FastSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 WriteSpeed; ///< SPI Write Speed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 Mode; ///< SPI Mode + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< SPI Auto Mode - 0:disable, 1:enable + UINT8 BurstWrite; ///< SPI Burst Write - 0:disable, 1:enable + BOOLEAN Sata6AhciCap; ///< SATA 6 AHCI Capability - TRUE:enable, FALSE:disable + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + BOOLEAN EcKbd; ///< EC KBD - 0:disable, 1:enable + BOOLEAN LegacyFree; ///< Legacy Free - 0:disable, 1:enable + BOOLEAN SataSetMaxGen2; ///< SATA enable maximum GEN2 + UINT8 SataClkMode; ///< SATA reference clock selector and divider + UINT8 SataModeReg; ///< Output: SATAConfig PMIO:0xDA + BOOLEAN SataInternal100Spread; ///< SATA internal 100MHz spread ON/OFF + UINT8 SpiSpeed; ///< SPI NormSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; /// + BOOLEAN EcChannel0; ///< Enable EC channel 0 + FCH_GPP Gpp; ///< GPP subsystem + FCH_SPI Spi; ///< SPI subsystem + BOOLEAN QeEnabled; /// Quad Mode Enabled + BOOLEAN FchOscout1ClkContinous; ///< FCH OSCOUT1_CLK Continous + VOID* EarlyOemGpioTable; /// Pointer of Early OEM GPIO table +// VOID* OemSpiDeviceTable; /// Pointer of OEM Spi Device table + VOID* OemResetProgrammingTablePtr; /// Pointer of ACPI OEM table +} FCH_RESET_DATA_BLOCK; + + +/// Private: FCH_DATA_BLOCK +typedef struct _FCH_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + + FCH_ACPI HwAcpi; ///< ACPI structure + FCH_AB Ab; ///< AB structure + FCH_GPP Gpp; ///< GPP structure + FCH_USB Usb; ///< USB structure + FCH_SATA Sata; ///< SATA structure + FCH_SMBUS Smbus; ///< SMBus structure + FCH_IDE Ide; ///< IDE structure + FCH_AZALIA Azalia; ///< Azalia structure + FCH_SPI Spi; ///< SPI structure + FCH_PCIB Pcib; ///< PCIB structure + FCH_GEC Gec; ///< GEC structure + FCH_SD Sd; ///< SD structure + FCH_HWM Hwm; ///< Hardware Moniter structure + FCH_IR Ir; ///< IR structure + FCH_HPET Hpet; ///< HPET structure + FCH_GCPU Gcpu; ///< GCPU structure + FCH_IMC Imc; ///< IMC structure + FCH_MISC Misc; ///< MISC structure + VOID* PostOemGpioTable; /// Pointer of Post OEM GPIO table +} FCH_DATA_BLOCK; + +#pragma pack (pop) + +#endif diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchDef.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchDef.h new file mode 100644 index 0000000000..d8317b919c --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Common/FchDef.h @@ -0,0 +1,477 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH routine definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright 2008 - 2014 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#ifndef _FCH_DEF_H_ +#define _FCH_DEF_H_ + + +UINT32 ReadAlink (IN UINT32 Index, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteAlink (IN UINT32 Index, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwAlink (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID WriteMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID RwMem (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data); +VOID ReadPci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPci (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramPciByteTable (IN REG8_MASK* pPciByteTable, IN UINT16 dwTableSize, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchAcpiMmioTbl (IN ACPI_REG_WRITE *pAcpiTbl, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchSciMapTbl (IN SCI_MAP_CONTROL *pSciMapTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID ProgramFchGpioTbl (IN GPIO_CONTROL *pGpioTbl); +VOID ProgramFchSataPhyTbl (IN SATA_PHY_CONTROL *pSataPhyTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID GetChipSysMode (IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsImcEnabled (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiMmioBase (OUT UINT32 *AcpiMmioBase, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiPmBase (OUT UINT16 *AcpiPmBase, IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchSleepType (IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchChipsetRevision (IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Fch Ab Routines +/// +/// Pei Phase +/// +VOID FchInitResetAb (IN VOID* FchDataPtr); +VOID FchProgramAbPowerOnReset (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAb (IN VOID* FchDataPtr); +VOID FchInitEnvAbSpecial (IN VOID* FchDataPtr); +VOID FchInitMidAb (IN VOID* FchDataPtr); +VOID FchInitLateAb (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchInitEnvAbLinkInit (IN VOID* FchDataPtr); +BOOLEAN IsUmiOneLaneGen1Mode (IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchAbLateProgram (IN VOID* FchDataPtr); + +/// +/// Fch Pcie Routines +/// +/// Pei Phase +/// +VOID FchInitResetPcie (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvPcie (IN VOID* FchDataPtr); +VOID FchInitMidPcie (IN VOID* FchDataPtr); +VOID FchInitLatePcie (IN VOID* FchDataPtr); +VOID ProgramPcieNativeMode (IN VOID* FchDataPtr); + +/// +/// Fch Gpp Routines +/// +/// Pei Phase +/// +VOID FchInitResetGpp (IN VOID* FchDataPtr); +VOID ProgramFchGppInitReset (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchResetPcie (IN RESET_BLOCK ResetBlock, IN RESET_OP ResetOp, IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Dxe Phase +/// +VOID FchInitEnvGpp (IN VOID* FchDataPtr); +VOID FchInitMidGpp (IN VOID* FchDataPtr); +VOID FchInitLateGpp (IN VOID* FchDataPtr); + +/// +/// Common Gpp Routines +/// +VOID ProgramGppTogglePcieReset (IN BOOLEAN DoToggling, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppForceGen1 (IN FCH_GPP *FchGpp, IN CONST UINT8 ActivePorts, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppForceGen2 (IN FCH_GPP *FchGpp, IN CONST UINT8 ActivePorts, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppDynamicPowerSaving (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 GppPortPollingLtssm (IN FCH_GPP *FchGpp, IN UINT8 ActivePorts, IN BOOLEAN IsGen2, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GppGen2Workaround (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 FchFindPciCap (IN UINT32 PciAddress, IN UINT8 TargetCapId, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppPortInit (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppPortInitPhaseII (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchGppPortInitS3Phase (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); +UINT32 GppGetFchTempBus (IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Fch Azalia Routines +/// +/// Pei Phase +/// +VOID FchInitResetAzalia (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAzalia (IN VOID *FchDataPtr); +VOID FchInitMidAzalia (IN VOID *FchDataPtr); +VOID FchInitLateAzalia (IN VOID *FchDataPtr); + + +/// +/// Fch GEC Routines +/// +/// Pei Phase +/// +VOID FchInitResetGec (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvGec (IN VOID* FchDataPtr); +VOID FchInitMidGec (IN VOID* FchDataPtr); +VOID FchInitLateGec (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchInitGecController (IN VOID* FchDataPtr); +VOID FchSwInitGecBootRom (IN VOID* FchDataPtr); + +/// +/// Fch HwAcpi Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitResetHwAcpi (IN VOID *FchDataPtr); +VOID ProgramFchHwAcpiResetP (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitEnvHwAcpi (IN VOID *FchDataPtr); +VOID ProgramEnvPFchAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvHwAcpiPciReg (IN VOID *FchDataPtr); +VOID ProgramSpecificFchInitEnvAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvSpreadSpectrum (IN VOID *FchDataPtr); +VOID FchInitMidHwAcpi (IN VOID *FchDataPtr); +VOID FchInitLateHwAcpi (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// +VOID HpetInit (IN VOID *FchDataPtr); +VOID C3PopupSetting (IN VOID *FchDataPtr); +VOID MtC1eEnable (IN VOID *FchDataPtr); +VOID GcpuRelatedSetting (IN VOID *FchDataPtr); +VOID StressResetModeLate (IN VOID *FchDataPtr); + +/// +/// Fch Hwm Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwm (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwm (IN VOID* FchDataPtr); +VOID FchInitMidHwm (IN VOID* FchDataPtr); +VOID FchInitLateHwm (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID HwmInitRegister (IN VOID* FchDataPtr); +VOID HwmProcessParameter (IN VOID* FchDataPtr); +VOID HwmSetRegister (IN VOID* FchDataPtr); +VOID HwmGetCalibrationFactor (IN VOID* FchDataPtr); +VOID HwmFchtsiAutoPolling (IN VOID* FchDataPtr); +VOID HwmGetRawData (IN VOID* FchDataPtr); +VOID HwmCaculate (IN VOID* FchDataPtr); +VOID HwmFchtsiAutoPollingOff (IN VOID* FchDataPtr); +VOID FchECfancontrolservice (IN VOID* FchDataPtr); + + +/// +/// Fch Ide Routines +/// +VOID FchInitEnvIde (IN VOID* FchDataPtr); +VOID FchInitMidIde (IN VOID* FchDataPtr); +VOID FchInitLateIde (IN VOID* FchDataPtr); + + +/// +/// Fch Imc Routines +/// +/// Pei Phase +/// +VOID FchInitResetImc (IN VOID *FchDataPtr); +VOID FchInitResetEc (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvImc (IN VOID *FchDataPtr); +VOID FchInitMidImc (IN VOID *FchDataPtr); +VOID FchInitLateImc (IN VOID *FchDataPtr); +VOID FchInitEnvEc (IN VOID *FchDataPtr); +VOID FchInitMidEc (IN VOID *FchDataPtr); +VOID FchInitLateEc (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID EnterEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ExitEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwEc8 (IN UINT8 Address, IN UINT8 AndMask, IN UINT8 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WaitForEcLDN9MailboxCmdAck (IN AMD_CONFIG_PARAMS *StdHeader); + +VOID ImcSleep (IN VOID *FchDataPtr); +VOID ImcEnableSurebootTimer (IN VOID *FchDataPtr); +VOID ImcDisarmSurebootTimer (IN VOID *FchDataPtr); +VOID ImcDisableSurebootTimer (IN VOID *FchDataPtr); +VOID ImcWakeup (IN VOID *FchDataPtr); +VOID ImcIdle (IN VOID *FchDataPtr); +BOOLEAN ValidateImcFirmware (IN VOID *FchDataPtr); +VOID SoftwareToggleImcStrapping (IN VOID *FchDataPtr); +VOID ImcCrashReset (IN VOID *FchDataPtr); +VOID SoftwareDisableImc (IN VOID *FchDataPtr); + + +/// +/// Fch Ir Routines +/// +/// Dxe Phase +/// +VOID FchInitEnvIr (IN VOID* FchDataPtr); +VOID FchInitMidIr (IN VOID* FchDataPtr); +VOID FchInitLateIr (IN VOID* FchDataPtr); + +/// +/// Fch Pcib Routines +/// +/// Pei Phase +/// +VOID FchInitResetPcib (IN VOID* FchDataPtr); +VOID FchInitResetPcibPort80Enable (IN VOID* FchDataPtr); + +/// +/// Dxe Phase +/// +VOID FchInitEnvPcib (IN VOID* FchDataPtr); +VOID FchInitMidPcib (IN VOID* FchDataPtr); +VOID FchInitLatePcib (IN VOID* FchDataPtr); + + +/// +/// Fch SATA Routines +/// +/// Pei Phase +/// +VOID FchInitResetSata (IN VOID *FchDataPtr); +VOID FchInitResetSataProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitMidSata (IN VOID *FchDataPtr); +VOID FchInitEnvSata (IN VOID *FchDataPtr); +VOID FchInitEnvProgramSataPciRegs (IN VOID *FchDataPtr); +VOID FchInitMidProgramSataRegs (IN VOID *FchDataPtr); +VOID FchInitLateProgramSataRegs (IN VOID *FchDataPtr); + +VOID FchInitLateSata (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde (IN VOID *FchDataPtr); +VOID FchInitMidSataIde (IN VOID *FchDataPtr); +VOID FchInitLateSataIde (IN VOID *FchDataPtr); +VOID FchInitEnvSataAhci (IN VOID *FchDataPtr); +VOID FchInitMidSataAhci (IN VOID *FchDataPtr); +VOID FchInitLateSataAhci (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaid (IN VOID *FchDataPtr); +VOID FchInitMidSataRaid (IN VOID *FchDataPtr); +VOID FchInitLateSataRaid (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitMidSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitLateSataIde2Ahci (IN VOID *FchDataPtr); + +VOID SataAhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataRaidSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataIde2AhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataSetIrqIntResource (IN VOID *FchDataPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataBar5setting (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID SataEnableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataDisableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID FchSataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID ShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID FchShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID SataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID FchSataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID FchSataGpioInitial (IN VOID *FchDataPtr); +VOID SataBar5RegSet (IN VOID *FchDataPtr); +VOID SataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchSataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchProgramSataPhy (IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchSataDriveFpga (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaidProgram (IN VOID *FchDataPtr); + +/// +/// FCH USB Controller Public Function +/// +/// Pei Phase +/// +VOID FchInitResetUsb (IN VOID *FchDataPtr); +VOID FchInitResetOhci (IN VOID *FchDataPtr); +VOID FchInitResetEhci (IN VOID *FchDataPtr); +VOID FchInitResetXhci (IN VOID *FchDataPtr); +VOID FchInitResetXhciProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvUsb (IN VOID *FchDataPtr); +VOID FchInitMidUsb (IN VOID *FchDataPtr); +VOID FchInitLateUsb (IN VOID *FchDataPtr); +VOID FchInitEnvUsbOhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbOhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbOhci (IN VOID *FchDataPtr); +VOID FchInitEnvUsbEhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbEhci (IN VOID *FchDataPtr); +VOID FchInitEnvUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbXhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbOhci1 (IN VOID *FchDataPtr); +VOID FchInitMidUsbOhci2 (IN VOID *FchDataPtr); +VOID FchInitMidUsbOhci3 (IN VOID *FchDataPtr); +VOID FchInitMidUsbOhci4 (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci1 (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitMidUsbEhci2 (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitMidUsbEhci3 (IN FCH_DATA_BLOCK *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSetUsbEnableReg (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchOhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchEhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitIndirectReg (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchInitLateUsbXhciProgram (IN VOID *FchDataPtr); +VOID FchXhciPowerSavingProgram (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciUsbPhyCalibrated (IN FCH_DATA_BLOCK* FchDataPtr); + +/// +/// Fch Sd Routines +/// +VOID FchInitEnvSd (IN VOID *FchDataPtr); +VOID FchInitMidSd (IN VOID *FchDataPtr); +VOID FchInitLateSd (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// + +VOID FchInitEnvSdProgram (IN VOID *FchDataPtr); + +/// +/// Fch Spi Routines +/// +/// Pei Phase +/// +VOID FchInitResetSpi (IN VOID *FchDataPtr); +VOID FchInitResetLpc (IN VOID *FchDataPtr); +VOID FchInitResetLpcProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvSpi (IN VOID *FchDataPtr); +VOID FchInitMidSpi (IN VOID *FchDataPtr); +VOID FchInitLateSpi (IN VOID *FchDataPtr); +VOID FchInitEnvLpc (IN VOID *FchDataPtr); +VOID FchInitMidLpc (IN VOID *FchDataPtr); +VOID FchInitLateLpc (IN VOID *FchDataPtr); +VOID FchInitEnvLpcProgram (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSpiUnlock (IN VOID *FchDataPtr); +VOID FchSpiLock (IN VOID *FchDataPtr); + +/*--------------------------- Documentation Pages ---------------------------*/ +VOID FchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID CimFchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchPciReset (IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort80 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort1080 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetEfuseStatus (IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID TurnOffCG2 (OUT VOID); +VOID BackUpCG2 (OUT VOID); +VOID FchCopyMem (IN VOID* pDest, IN VOID* pSource, IN UINTN Length); +VOID* GetRomSigPtr (IN UINTN* RomSigPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhciIndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci0IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci1IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci0Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci1Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID AcLossControl (IN UINT8 AcLossControlValue); +VOID FchVgaInit (OUT VOID); +VOID RecordFchConfigPtr (IN UINT32 FchConfigPtr); +VOID ValidateFchVariant (IN VOID *FchDataPtr); +VOID RecordSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ClearAllSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsGCPU (IN VOID *FchDataPtr); +BOOLEAN IsExternalClockMode (IN VOID *FchDataPtr); +VOID SbSleepTrapControl (IN BOOLEAN SleepTrap); + +AGESA_STATUS +FchSpiTransfer ( + IN UINT8 PrefixCode, + IN UINT8 Opcode, + IN OUT UINT8 *DataPtr, + IN UINT8 *AddressPtr, + IN UINT8 Length, + IN BOOLEAN WriteFlag, + IN BOOLEAN AddressFlag, + IN BOOLEAN DataFlag, + IN BOOLEAN FinishedFlag + ); + +BOOLEAN +FchPlatformSpiQe ( + IN VOID *FchDataPtr + ); + +#endif + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/Fch.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Fch.h new file mode 100644 index 0000000000..6685c67e20 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/Fch.h @@ -0,0 +1,2285 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH registers definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* +***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +**************************************************************************** +*/ +#define FCH_REVISION "0.0.5.0" +#define FCH_ID "FCH_A05" +#define FCH_VERSION 0x0000 + +/** + * @page fchinitguide FCH implement phase in AGESA + * + * FCH provides below access to supported FCH service functions + * and data. + * - @subpage fchreset "FCH_INIT_RESET" + * - @subpage fchenv "FCH_INIT_ENV" + * - @subpage fchmid "FCH_INIT_MID" + * - @subpage fchlate "FCH_INIT_LATE" + * - @subpage fchs3early "FCH_INIT_S3_EARLY_RESTORE" + * - @subpage fchs3late "FCH_INIT_S3_LATE_RESTORE" + * - @subpage fchsmm "FCH_SMM_SERVICE" + * - @subpage fchsmmacpion "FCH_SMM_ACPION" + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchreset FCH_INIT_RESET + * @section FCH_INIT_RESET Interface Call + * @par + * Initialize structure referenced by FCH_RESET_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_RESET_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitReset (IN AMD_RESET_PARAMS *ResetParams); + * @subsection FCH_INIT_RESET_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_RESET_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgWatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgGecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgCpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchenv FCH_INIT_ENV + * @section FCH_INIT_ENV Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_ENV_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitEnv (IN AMD_ENV_PARAMS *EnvParams); + * @subsection FCH_INIT_ENV_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_ENV_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchmid FCH_INIT_MID + * @section FCH_INIT_MID Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_MID_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitMid (IN AMD_MID_PARAMS *MidParams); + * @subsection FCH_INIT_MID_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_MID_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchlate FCH_INIT_LATE + * @section FCH_INIT_LATE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_LATE_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitLate (IN AMD_S3SAVE_PARAMS *LateParams); + * @subsection FCH_INIT_LATE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_LATE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3early FCH_INIT_S3_EARLY_RESTORE + * @section FCH_INIT_S3_EARLY_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_EARLY_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3late FCH_INIT_S3_LATE_RESTORE + * @section FCH_INIT_S3_LATE_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_LATE_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_LATE_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_LATE_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmm FCH_SMM_SERVICE + * @section FCH_SMM_SERVICE Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_SERVICE_CallIn Call Prototype + * @par + * FchSmmService ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_SERVICE_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_SERVICE --> 0x00010060 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_SERVICE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_SERVICE_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_SERVICE 0x00010060ul +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmmacpion FCH_SMM_ACPION + * @section FCH_SMM_ACPION Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_ACPION_CallIn Call Prototype + * @par + * FchSmmAcpiOn ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_ACPION_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_ACPION --> 0x00010061 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_ACPION_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_ACPION_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_ACPION 0x00010061ul + +#ifndef OEM_CALLBACK_BASE + #define OEM_CALLBACK_BASE 0x00010100ul +#endif + +//0x00 - 0x0F callback functions are reserved for bootblock +#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10 +#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT + * @section CB_SBGPP_RESET_ASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT + * @section CB_SBGPP_RESET_DEASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31 + +#define CFG_ADDR_PORT 0xCF8 +#define CFG_DATA_PORT 0xCFC + +#define ALINK_ACCESS_INDEX 0x0CD8 +#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4 + +/*------------------------------------------------------------------ +; I/O Base Address - Should be set by host BIOS +;------------------------------------------------------------------ */ +#define DELAY_PORT 0x0E0 + +#define FCH_8259_CONTROL_REG_MASTER 0x20 +#define FCH_8259_MASK_REG_MASTER 0x21 + +/*------------------------------------------------------------------ +; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display +;------------------------------------------------------------------ */ +// ASIC VendorID and DeviceIDs +#define ATI_VID 0x1002 +#define AMD_FCH_VID 0x1022 +#define FCH_DEVICE_ID 0x780B +#define FCH_SATA_VID AMD_FCH_VID // Dev 17 Func 0 +#define FCH_SATA_DID 0x7800 +#define FCH_SATA_AHCI_DID 0x7801 +#define FCH_SATA_RAID_DID 0x7802 +#define FCH_SATA_RAID5_DID 0x7803 +#define FCH_SATA_AMDAHCI_DID 0x7804 +#define FCH_SATA_RAID_DOTHILL_DID 0x7805 +#define FCH_SATA_RAID5_DOTHILL_DID 0x780A +#define FCH_USB_OHCI_VID AMD_FCH_VID // Dev 18 Func 0, Dev 19 Func 0 +#define FCH_USB_OHCI_DID 0x7807 +#define FCH_USB_EHCI_VID AMD_FCH_VID // Dev 18 Func 2, Dev 19 Func 2 +#define FCH_USB_EHCI_DID 0x7808 +#define FCH_USB_XHCI_VID AMD_FCH_VID // Dev 10 Func 0, Dev 10 Func 1 +#define FCH_USB_XHCI_DID 0x7812 +#define FCH_USB_XHCI_DID_BOLTON 0x7814 +#define FCH_SMBUS_VID AMD_FCH_VID // Dev 20 Func 0 +#define FCH_SMBUS_DID 0x780B +#define FCH_IDE_VID AMD_FCH_VID // Dev 20 Func 1 +#define FCH_IDE_DID 0x780C +#define FCH_AZALIA_VID AMD_FCH_VID // Dev 20 Func 2 +#define FCH_AZALIA_DID 0x780D +#define FCH_LPC_VID AMD_FCH_VID // Dev 20 Func 3 +#define FCH_LPC_DID 0x780E +#define FCH_PCIB_VID AMD_FCH_VID // Dev 20 Func 4 +#define FCH_PCIB_DID 0x780F +#define FCH_USB_OHCIF_VID AMD_FCH_VID // dev 20 Func 5 +#define FCH_USB_OHCIF_DID 0x7809 +#define FCH_NIC_VID 0x14E4 // Dev 20 Func 6 +#define FCH_NIC_DID 0x1699 +#define FCH_SD_VID AMD_FCH_VID // Dev 20 Func 7 +#define FCH_SD_DID 0x7806 + +//FCH Variant +#define FCH_Variant_EFUSE_LOCATION 0x1E // EFUSE bit 240-247 + +#define FCH_M2 0x01 +#define FCH_M3 0x03 +#define FCH_M3T 0x07 +#define FCH_D2 0x0F +#define FCH_D3 0x1F +#define FCH_D4 0x3F +#define FCH_BOLTON 0x15 +#define FCH_YANGTZE 0x39 +#define FCH_YANGTZEA1 0x3A +//Misc +#define R_FCH_ACPI_PM1_STATUS 0x00 +#define R_FCH_ACPI_PM1_ENABLE 0x02 +#define R_FCH_ACPI_PM_CONTROL 0x04 +#define R_FCH_ACPI_EVENT_STATUS 0x20 +#define R_FCH_ACPI_EVENT_ENABLE 0x24 +#define R_FCH_PM_ACPI_PMA_CNT_BLK_LO 0x2C + +// ACPI Sleep Type +#define ACPI_SLPTYP_S0 0 +#define ACPI_SLPTYP_S1 1 +#define ACPI_SLPTYP_S3 3 +#define ACPI_SLPTYP_S4 4 +#define ACPI_SLPTYP_S5 5 + +//#define SATA_BUS_DEV_FUN_FPGA 0x228 +#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0) +#define FCH_SATA1_BUS 0 +#define FCH_SATA1_DEV 17 +#define FCH_SATA1_FUNC 0 + +#define FC_BUS_DEV_FUN ((0x11 << 3) + 1) +#define FCH_XHCI_BUS 0 +#define FCH_XHCI_DEV 16 +#define FCH_XHCI_FUNC 0 +#define USB_XHCI_BUS_DEV_FUN ((FCH_XHCI_DEV << 3) + FCH_XHCI_FUNC) +#define FCH_XHCI1_BUS 0 +#define FCH_XHCI1_DEV 16 +#define FCH_XHCI1_FUNC 1 +#define USB_XHCI1_BUS_DEV_FUN ((FCH_XHCI1_DEV << 3) + FCH_XHCI1_FUNC) +#define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4 +#define FCH_OHCI1_BUS 0 +#define FCH_OHCI1_DEV 18 +#define FCH_OHCI1_FUNC 0 +#define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9 +#define FCH_OHCI2_BUS 0 +#define FCH_OHCI2_DEV 19 +#define FCH_OHCI2_FUNC 0 +#define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13 +#define FCH_OHCI3_BUS 0 +#define FCH_OHCI3_DEV 22 +#define FCH_OHCI3_FUNC 0 +#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4 +#define FCH_EHCI1_BUS 0 +#define FCH_EHCI1_DEV 18 +#define FCH_EHCI1_FUNC 2 +#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9 +#define FCH_EHCI2_BUS 0 +#define FCH_EHCI2_DEV 19 +#define FCH_EHCI2_FUNC 2 +#define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13 +#define FCH_EHCI3_BUS 0 +#define FCH_EHCI3_DEV 22 +#define FCH_EHCI3_FUNC 2 +#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0) +#define FCH_ISA_BUS 0 +#define FCH_ISA_DEV 20 +#define FCH_ISA_FUNC 0 +#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1) +#define FCH_IDE_BUS 0 +#define FCH_IDE_DEV 20 +#define FCH_IDE_FUNC 1 +#define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2) +#define FCH_AZALIA_BUS 0 +#define FCH_AZALIA_DEV 20 +#define FCH_AZALIA_FUNC 2 +#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3) +#define FCH_LPC_BUS 0 +#define FCH_LPC_DEV 20 +#define FCH_LPC_FUNC 3 +#define PCIB_BUS_DEV_FUN ((0x14 << 3) + 4) // P2P in SB700 +#define FCH_PCI_BUS 0 +#define FCH_PCI_DEV 20 +#define FCH_PCI_FUNC 4 +#define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1 +#define FCH_OHCI4_BUS 0 +#define FCH_OHCI4_DEV 20 +#define FCH_OHCI4_FUNC 5 +//Gigabyte Ethernet Controller +#define GEC_BUS_DEV_FUN ((0x14 << 3) + 6) +#define FCH_GBEC_BUS 0 +#define FCH_GBEC_DEV 20 +#define FCH_GBEC_FUNC 6 + +#define SD_BUS_DEV_FUN ((0x14 << 3) + 7) // SD Controller +#define SD_PCI_BUS 0 +#define SD_PCI_DEV 20 +#define SD_PCI_FUNC 7 + + +#define FCH_GPP_BUS 0 +#define FCH_GPP_DEV 21 +#define FCH_GPP_FUNC 0 +#define GPP0_BUS_DEV_FUN ((0x15 << 3) + 0) // GPP P2P bridge PORT0 +#define GPP1_BUS_DEV_FUN ((0x15 << 3) + 1) // GPP P2P bridge PORT1 +#define GPP2_BUS_DEV_FUN ((0x15 << 3) + 2) // GPP P2P bridge PORT2 +#define GPP3_BUS_DEV_FUN ((0x15 << 3) + 3) // GPP P2P bridge PORT3 + +#define ACPI_MMIO_BASE 0xFED80000ul +#define FCH_CFG_BASE 0x000 // DWORD +#define GPIO_BASE 0x100 // BYTE +#define SMI_BASE 0x200 // DWORD +#define PMIO_BASE 0x300 // DWORD +#define PMIO2_BASE 0x400 // BYTE +#define BIOS_RAM_BASE 0x500 // BYTE +#define CMOS_RAM_BASE 0x600 // BYTE +#define CMOS_BASE 0x700 // BYTE +#define ASF_BASE 0x900 // DWORD +#define SMBUS_BASE 0xA00 // DWORD +#define WATCHDOG_BASE 0xB00 // +#define HPET_BASE 0xC00 // DWORD +#define IOMUX_BASE 0xD00 // BYTE +#define MISC_BASE 0xE00 +#define SERIAL_DEBUG_BASE 0x1000 +#define GFX_DAC_BASE 0x1400 +#define GPIO_BANK0_BASE 0x1500 // DWORD +//#define GPIO_BANK1_BASE 0x1600 // DWORD +//#define GPIO_BANK2_BASE 0x1700 // DWORD +#define CEC_BASE 0x1800 +#define XHCI_BASE 0x1C00 +#define ACDC_BASE 0x1D00 +#define AOAC_BASE 0x1E00 + + +// Chip type definition +#define CHIPTYPE_HUDSON2 (1 << 0) +#define CHIPTYPE_YUBA (1 << 1) + +// +// ROM SIG type definition +// +#define NUM_OF_ROMSIG_FILED 0x04 +#define XHCI_FILED_NUM 0x03 +#define ROMSIG_CFG_MASK 0x07 +#define XHCI_BOOT_RAM_OFFSET 0x8000 +#define INSTRUCTION_RAM_SIG 0x55AA +#define ROMSIG_SIG 0x55AA55AAul + +// RegSpace field (AB_INDEX[31:29] +#define AXINDC 0 // AXINDC +#define AXINDP 2 // AXINDP +#define ABCFG 6 // ABCFG +#define AXCFG 4 // AXCFG +#define RCINDXC 1 // PCIEIND +#define RCINDXP 3 // PCIEIND_P + +#define GPP_DEV_NUM 21 // +#define MAX_GPP_PORTS 4 + +#define PCIE_FORCE_GEN1_EFUSE_LOCATION 0x14 // EFUSE bit 160 +// +// ABCFG Registers +// +#define FCH_ABCFG_REG00 0x00 // VENDOR ID +#define FCH_ABCFG_REG08 0x08 // REVISION ID +#define FCH_ABCFG_REG40 0x40 // BL_EVENTCNT0LO +#define FCH_ABCFG_REG44 0x44 // BL_EVENTCNT1LO +#define FCH_ABCFG_REG48 0x48 // BL_EVENTCNTSEL +#define FCH_ABCFG_REG4A 0x4A // BL_EVENTCNT0HI +#define FCH_ABCFG_REG4B 0x4B // BL_EVENTCNT1HI +#define FCH_ABCFG_REG4C 0x4C // BL_EVENTCNTCTL +#define FCH_ABCFG_REG50 0x50 // MISCCTL_50 +#define FCH_ABCFG_REG54 0x54 // MISCCTL_54 +#define FCH_ABCFG_REG58 0x58 // BL RAB CONTROL + +#define FCH_ABCFG_REG60 0x60 // LINKWIDTH_CTL +#define FCH_ABCFG_REG64 0x64 // LINKWIDTH_UP_INTERVAL +#define FCH_ABCFG_REG68 0x68 // LINKWIDTH_DN_INVERVAL +#define FCH_ABCFG_REG6C 0x6C // LINKWIDTH_UPSTREAM_DWORDS +#define FCH_ABCFG_REG70 0x70 // LINKWIDTH_DOWNSTREAM_DWORDS +#define FCH_ABCFG_REG74 0x74 // LINKWIDTH_THRESHOLD_INCREASE +#define FCH_ABCFG_REG78 0x78 // LINKWIDTH_THRESHOLD_DECREASE + +#define FCH_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG88 0x88 // +#define FCH_ABCFG_REG8C 0x8C // +#define FCH_ABCFG_REG90 0x90 // BIF CONTROL 0 +#define FCH_ABCFG_REG94 0x94 // MSI CONTROL +#define FCH_ABCFG_REG98 0x98 // BIF CONTROL 1 +#define FCH_ABCFG_REG9C 0x9C // MISCCTL_9C +#define FCH_ABCFG_REGA0 0xA0 // BIF PHY CONTROL ENABLE +#define FCH_ABCFG_REGA4 0xA4 // BIF PHY CONTROL A4 +#define FCH_ABCFG_REGA8 0xA8 // BIF PHY CONTROL A8 +#define FCH_ABCFG_REGB0 0xB0 // HYPERFLASH-PCIE PORT MAPPING +#define FCH_ABCFG_REGB8 0xB8 // +#define FCH_ABCFG_REGB4 0xB4 // +#define FCH_ABCFG_REGBC 0xBC // +#define FCH_ABCFG_REGC0 0xC0 // PCIE_GPP_ENABLE +#define FCH_ABCFG_REGC4 0xC4 // PCIE_P2P_INT_MAP +#define FCH_ABCFG_REGD0 0xD0 // MCTP_VDM_TX_FIFO_DATA +#define FCH_ABCFG_REGD4 0xD4 // MCTP_VMD_TX_CONTROL +#define FCH_ABCFG_REGE0 0xE0 // MCTP_VDM_RX_FIFO_DATA +#define FCH_ABCFG_REGE4 0xE4 // MCTP_VDM_RX_FIFO_STATUS +#define FCH_ABCFG_REGEC 0xEC // MCTP_VDM_CONTROL +#define FCH_ABCFG_REGF0 0xF0 // GPP_UPSTREAM_CONTROL +#define FCH_ABCFG_REGF4 0xF4 // GPP_SYSTEM_ERROR_CONTROL +#define FCH_ABCFG_REGFC 0xFC // FCH_TRAP_CONTROL +#define FCH_ABCFG_REG100 0x100 // FCH_TRAP0_ADDRL +#define FCH_ABCFG_REG104 0x104 // FCH_TRAP0_ADDRH +#define FCH_ABCFG_REG108 0x108 // FCH_TRAP0_CMD +#define FCH_ABCFG_REG10C 0x10C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG110 0x110 // FCH_TRAP1_ADDRL +#define FCH_ABCFG_REG114 0x114 // FCH_TRAP1_ADDRH +#define FCH_ABCFG_REG118 0x118 // FCH_TRAP1_CMD +#define FCH_ABCFG_REG11C 0x11C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG120 0x120 // FCH_TRAP2_ADDRL +#define FCH_ABCFG_REG124 0x124 // FCH_TRAP2_ADDRH +#define FCH_ABCFG_REG128 0x128 // FCH_TRAP2_CMD +#define FCH_ABCFG_REG12C 0x12C // FCH_TRAP2_DATA +#define FCH_ABCFG_REG130 0x130 // FCH_TRAP3_ADDRL +#define FCH_ABCFG_REG134 0x134 // FCH_TRAP3_ADDRH +#define FCH_ABCFG_REG138 0x138 // FCH_TRAP3_CMD +#define FCH_ABCFG_REG13C 0x13C // FCH_TRAP3_DATA +#define FCH_ABCFG_REG208 0x208 // KR New +#define FCH_ABCFG_REG300 0x300 // MCTP_VDM_RX_SMI_CONTROL +#define FCH_ABCFG_REG310 0x310 // BIF_GPP_STRAP_SYSTEM_0 +#define FCH_ABCFG_REG314 0x314 // BIF_GPP_STRAP_SYSTEM_1 +#define FCH_ABCFG_REG31C 0x31C // BIF_GPP_STRAP_LINK_CONTROL_0 +#define FCH_ABCFG_REG320 0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A +#define FCH_ABCFG_REG324 0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B +#define FCH_ABCFG_REG328 0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C +#define FCH_ABCFG_REG32C 0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D +#define FCH_ABCFG_REG330 0x330 // BIF_GPP_STRAP_BIF_0 +#define FCH_ABCFG_REG334 0x334 // BIF_GPP_STRAP_BIF_1 +#define FCH_ABCFG_REG338 0x338 // BIF_GPP_STRAP_BIF_2 +#define FCH_ABCFG_REG340 0x340 // BIF_GPP_STRAP_BIF_LANE_A +#define FCH_ABCFG_REG344 0x344 // BIF_GPP_STRAP_BIF_LANE_B +#define FCH_ABCFG_REG348 0x348 // BIF_GPP_STRAP_BIF_LANE_C +#define FCH_ABCFG_REG34C 0x34C // BIF_GPP_STRAP_BIF_LANE_D +#define FCH_ABCFG_REG350 0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0 +#define FCH_ABCFG_REG354 0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1 +#define FCH_ABCFG_REG404 0x404 // GPP0_SHADOW_COMMAND +#define FCH_ABCFG_REG418 0x418 // GPP0_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG41C 0x41C // GPP0_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG420 0x420 // GPP0_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG424 0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG428 0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG42C 0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG430 0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG43C 0x43C // GPP0_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG444 0x444 // GPP1_SHADOW_COMMAND +#define FCH_ABCFG_REG458 0x458 // GPP1_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG45C 0x45C // GPP1_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG460 0x460 // GPP1_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG464 0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG468 0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG46C 0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG470 0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG47C 0x47C // GPP1_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG484 0x484 // GPP2_SHADOW_COMMAND +#define FCH_ABCFG_REG498 0x498 // GPP2_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG49C 0x49C // GPP2_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4A0 0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A4 0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A8 0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4AC 0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4B0 0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4BC 0x4BC // GPP2_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG4C4 0x4C4 // GPP3_SHADOW_COMMAND +#define FCH_ABCFG_REG4D8 0x4D8 // GPP3_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG4DC 0x4DC // GPP3_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4E0 0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E4 0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E8 0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4EC 0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4F0 0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4FC 0x4FC // GPP3_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG10040 0x10040ul // AL_EVENTCNT0LO +#define FCH_ABCFG_REG10044 0x10044ul // AL_EVENTCNT1LO +#define FCH_ABCFG_REG10048 0x10048ul // AL_EVENTCNTSEL +#define FCH_ABCFG_REG1004A 0x1004Aul // AL_EVENTCNT0HI +#define FCH_ABCFG_REG1004B 0x1004Bul // AL_EVENTCNT1HI +#define FCH_ABCFG_REG1004C 0x1004Cul // AL_EVENTCNTCTL +#define FCH_ABCFG_REG10050 0x10050ul // MISCCTL_10050 +#define FCH_ABCFG_REG10054 0x10054ul // AL_ARB_CTL +#define FCH_ABCFG_REG10056 0x10056ul // AL_CLK_CTL +#define FCH_ABCFG_REG10058 0x10058ul // AL RAB CONTROL +#define FCH_ABCFG_REG1005C 0x1005Cul // AL MLT CONTROL +#define FCH_ABCFG_REG10060 0x10060ul // AL DMA PREFETCH ENABLE +#define FCH_ABCFG_REG10064 0x10064ul // AL DMA PREFETCH FLUSH CONTROL +#define FCH_ABCFG_REG10068 0x10068ul // AL PREFETCH LIMIT +#define FCH_ABCFG_REG1006C 0x1006Cul // AL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG10070 0x10070ul // MISCCTL_10070 +#define FCH_ABCFG_REG10080 0x10080ul // CLKMUXSTATUS +#define FCH_ABCFG_REG10090 0x10090ul // BIF CONTROL 0 +#define FCH_ABCFG_REG1009C 0x1009Cul // MISCCTL_1009C + +// +// RCINDX_P Registers +// +#define FCH_RCINDXP_REG01 0x01 | RCINDXP << 29 // PCIEP_SCRATCH +#define FCH_RCINDXP_REG02 0x02 | RCINDXP << 29 // +#define FCH_RCINDXP_REG10 0x10 | RCINDXP << 29 // +#define FCH_RCINDXP_REG20 0x20 | RCINDXP << 29 // PCIE_TX_CNTL +#define FCH_RCINDXP_REG21 0x21 | RCINDXP << 29 // PCIE_TX_REQUESTER_ID +#define FCH_RCINDXP_REG50 0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS +#define FCH_RCINDXP_REG6A 0x6A | RCINDXP << 29 // +#define FCH_RCINDXP_REG70 0x70 | RCINDXP << 29 // PCIE_RX_CNTL +#define FCH_RCINDXP_REGA0 0xA0 | RCINDXP << 29 // PCIE_LC_CNTL +#define FCH_RCINDXP_REGA1 0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL +#define FCH_RCINDXP_REGA2 0xA2 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA4 0xA4 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA5 0xA5 | RCINDXP << 29 // PCIE_LC_STATE0 +#define FCH_RCINDXP_REGC0 0xC0 | RCINDXP << 29 // + +// +// RCINDX_C Registers +// +#define FCH_RCINDXC_REG02 0x02 | RCINDXC << 29 // PCIE_HW_DEBUG +#define FCH_RCINDXC_REG10 0x10 | RCINDXC << 29 // PCIE_CNTL +#define FCH_RCINDXC_REG40 0x40 | RCINDXC << 29 // PCIE_P_CNTL +#define FCH_RCINDXC_REG65 0x65 | RCINDXC << 29 // PCIE_P_PAD_FORCE_DIS +#define FCH_RCINDXC_REGC0 0xC0 | RCINDXC << 29 // PCIE_STRAP_MISC +#define FCH_RCINDXC_REGC1 0xC1 | RCINDXC << 29 // PCIE_STRAP_MISC2 + + +// +// AXINDC Registers +// +#define FCH_AX_INDXC_REG02 0x02 // PCIEP_HW_DEBUG +#define FCH_AX_INDXC_REG10 0x10 +#define FCH_AX_INDXC_REG30 0x30 +#define FCH_AX_DATAC_REG34 0x34 +#define FCH_AX_INDXP_REG38 0x38 +#define FCH_AX_DATAP_REG3C 0x3C +#define FCH_AX_INDXC_REG40 0x40 | AXINDC << 29 +#define FCH_AX_INDXC_REGA4 0xA4 | AXINDC << 29 + +#define FCH_AX_INDXP_REG02 0x02 | AXINDP << 29 +#define FCH_AX_INDXP_REGA0 0xA0 | AXINDP << 29 +#define FCH_AX_INDXP_REGA4 0xA4 | AXINDP << 29 +#define FCH_AX_INDXP_REGB1 0xB1 | AXINDP << 29 + +#define FCH_AX_CFG_REG68 0x68 | AXCFG << 29 +#define FCH_AX_CFG_REG88 0x88 | AXCFG << 29 + +#define FCH_AB_REG04 0x04 +#define FCH_AB_REG40 0x40 + +//Sata Port Configuration +#define SIX_PORTS 0 +#define FOUR_PORTS 1 + +#define SATA_EFUSE_LOCATION 0x10 // EFUSE bit 133 +#define SATA_DH_EFUSE_LOCATION 0x11 // EFUSE bit 138 +#define SATA_FIS_BASE_EFUSE_LOC 0x15 // EFUSE bit 169 +#define SATA_EFUSE_BIT 0x20 // +#define SATA_DH_EFUSE_BIT 0x04 // +#define FCH_SATA_REG00 0x000 // Vendor ID - R- 16 bits +#define FCH_SATA_REG02 0x002 // Device ID - RW -16 bits +#define FCH_SATA_REG04 0x004 // PCI Command - RW - 16 bits +#define FCH_SATA_REG06 0x006 // PCI Status - RW - 16 bits +#define FCH_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08 +#define FCH_SATA_REG0C 0x00C // Cache Line Size - R/W - 8bits +#define FCH_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits +#define FCH_SATA_REG0E 0x00E // Header Type - R - 8 bits +#define FCH_SATA_REG0F 0x00F // BIST - R - 8 bits +#define FCH_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits +#define FCH_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits +#define FCH_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits +#define FCH_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits +#define FCH_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits +#define FCH_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits +#define FCH_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits +#define FCH_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits +#define FCH_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits +#define FCH_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits +#define FCH_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits +#define FCH_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits +#define FCH_SATA_REG3E 0x03E // Min Grant - R - 8 bits +#define FCH_SATA_REG3F 0x03F // Max Latency - R - 8 bits +#define FCH_SATA_REG40 0x040 // Configuration - RW - 32 bits +#define FCH_SATA_REG44 0x044 // Software Data Register - RW - 32 bits +#define FCH_SATA_REG48 0x048 +#define FCH_SATA_REG4C 0x04C +#define FCH_SATA_REG50 0x050 // Message Capability - R - 16 bits +#define FCH_SATA_REG52 0x052 // Message Control - R/W - 16 bits +#define FCH_SATA_REG54 0x054 // Message Address - R/W - 32 bits +#define FCH_SATA_REG58 0x058 // Message Data - R/W - 16 bits +#define FCH_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits +#define FCH_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits +#define FCH_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits +#define FCH_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits +#define FCH_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits +#define FCH_SATA_REG68 0x068 // MSI Program - R/W - 8 bits +#define FCH_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits +#define FCH_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits +#define FCH_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_REG86 0x086 // PY Global Control +#define FCH_SATA_REG87 0x087 +#define FCH_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8A 0x08A +#define FCH_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8E 0x08E +#define FCH_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG92 0x092 +#define FCH_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG96 0x096 +#define FCH_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_REGA0 0x0A0 // +#define FCH_SATA_REGA4 0x0A4 // +#define FCH_SATA_REGA5 0x0A5 //; +#define FCH_SATA_REGA8 0x0A8 // +#define FCH_SATA_REGAD 0x0AD //; +#define FCH_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_REGB5 0x0B5 //; +#define FCH_SATA_REGBD 0x0BD //; +#define FCH_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits +#define FCH_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits + +#define FCH_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG1C 0x01C +#define FCH_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits +#define FCH_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits +#define FCH_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits +#define FCH_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits +#define FCH_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits +#define FCH_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits +#define FCH_SATA_BAR5_REG8C 0x08C // IDE0 Read Data - RW - 32 bits +#define FCH_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits +#define FCH_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits +#define FCH_SATA_BAR5_REGCC 0x0CC // Read/Write Data - RW - 32 bits +#define FCH_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REGF8 0x0F8 // PORT Configuration +#define FCH_SATA_BAR5_REGFC 0x0FC +#define FCH_SATA_BAR5_REG100 0x0100 // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180 +#define FCH_SATA_BAR5_REG104 0x0104 // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel +#define FCH_SATA_BAR5_REG108 0x0108 // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel +#define FCH_SATA_BAR5_REG10C 0x010C // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel +#define FCH_SATA_BAR5_REG144 0x0144 // Serial ATA PY Configuration - RW - 32 bits +#define FCH_SATA_BAR5_REG148 0x0148 // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)] +#define FCH_SATA_BAR5_REG14C 0x014C // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)] +#define FCH_SATA_BAR5_REG120 0x0120 // +#define FCH_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status +#define FCH_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control +#define FCH_SATA_BAR5_REG130 0x0130 +#define FCH_SATA_BAR5_REG1B0 0x01B0 +#define FCH_SATA_BAR5_REG230 0x0230 +#define FCH_SATA_BAR5_REG2B0 0x02B0 +#define FCH_SATA_BAR5_REG330 0x0330 +#define FCH_SATA_BAR5_REG3B0 0x03B0 +#define FCH_SATA_BAR5_REG430 0x0430 +#define FCH_SATA_BAR5_REG4B0 0x04B0 + + +// USB ports +#define NUM_USB1_PORTS 5 +#define NUM_USB2_PORTS 5 +#define NUM_USB3_PORTS 4 +#define NUM_USB4_PORTS 2 +#define NUM_XHC0_PORTS 2 +#define NUM_XHC1_PORTS 2 + + +// +// USB OHCI Device 0x7807 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0 +// Device 20 (0x14) Func 5 (FL) 0x7809 +// +#define FCH_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002ul) +#define FCH_OHCI_REG04 0x04 // Command - RW +#define FCH_OHCI_REG06 0x06 // Status - R +#define FCH_OHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_OHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_OHCI_REG10 0x10 // Bar_OCI - RW +#define FCH_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW +#define FCH_OHCI_REG34 0x34 // Capability Pointer - R +#define FCH_OHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_OHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_OHCI_REG40 0x40 // Config Timers - RW +#define FCH_OHCI_REG42 0x42 // Port Disable Control - RW (800) +#define FCH_OHCI_REG46 0x46 // USB PHY Battery Charger - RW (800) +#define FCH_OHCI_REG48 0x48 // Port Force Reset - RW (800) +#define FCH_OHCI_REG4C 0x4C // MSI - RW (800) +#define FCH_OHCI_REG50 0x50 // Misc Control - RW +#define FCH_OHCI_REG51 0x51 +#define FCH_OHCI_REG52 0x52 +#define FCH_OHCI_REG58 0x58 // Over Current Control - RW +#define FCH_OHCI_REG5C 0x5C // Over Current Control - RW +#define FCH_OHCI_REG60 0x60 // Serial Bus Release Number - RW +#define FCH_OHCI_REG68 0x68 // Over Current PME Enable - RW +#define FCH_OHCI_REG74 0x74 // Target Timeout Control - RW +#define FCH_OHCI_REG80 0x80 // +#define FCH_OHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_OHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_OHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_OHCI_REGE4 0x0E4 // HT MSI Support +#define FCH_OHCI_REGF0 0x0F0 // Function Level Reset Capability +#define FCH_OHCI_REGF4 0x0F4 // Function Level Reset Control + +#define FCH_OHCI_BAR_REG00 0x00 // cRevision - R +#define FCH_OHCI_BAR_REG04 0x04 // cControl +#define FCH_OHCI_BAR_REG08 0x08 // cCommandStatus +#define FCH_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW +#define FCH_OHCI_BAR_REG10 0x10 // cInterruptEnable +#define FCH_OHCI_BAR_REG14 0x14 // cInterruptDisable +#define FCH_OHCI_BAR_REG18 0x18 // HcCCA +#define FCH_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED +#define FCH_OHCI_BAR_REG20 0x20 // HcControleadED +#define FCH_OHCI_BAR_REG24 0x24 // cControlCurrentED RW +#define FCH_OHCI_BAR_REG28 0x28 // HcBulkeadED +#define FCH_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW +#define FCH_OHCI_BAR_REG30 0x30 // HcDoneead +#define FCH_OHCI_BAR_REG34 0x34 // cFmInterval +#define FCH_OHCI_BAR_REG38 0x38 // cFmRemaining +#define FCH_OHCI_BAR_REG3C 0x3C // cFmNumber +#define FCH_OHCI_BAR_REG40 0x40 // cPeriodicStart +#define FCH_OHCI_BAR_REG44 0x44 // HcLSThresold +#define FCH_OHCI_BAR_REG48 0x48 // HcRDescriptorA +#define FCH_OHCI_BAR_REG4C 0x4C // HcRDescriptorB +#define FCH_OHCI_BAR_REG50 0x50 // HcRStatus +#define FCH_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800) +#define FCH_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800) +#define FCH_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800) + +#define FCH_OHCI_PORTSC_CCS 0x1 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PES 0x2 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PSS 0x4 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PPS 0x100 // HcRhPortStatus +#define FCH_OHCI_PORTSC_LSDA 0x200 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PRS 0x10 // HcRhPortStatus + +// +// USB EHCI Device 0x7808 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2 +// +#define FCH_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_EHCI_REG04 0x04 // Command - RW +#define FCH_EHCI_REG06 0x06 // Status - R +#define FCH_EHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_EHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_EHCI_REG10 0x10 // BAR - RW +#define FCH_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW +#define FCH_EHCI_REG34 0x34 // Capability Pointer - R +#define FCH_EHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_EHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_EHCI_REG40 0x40 // Config Timers - RW +#define FCH_EHCI_REG4C 0x4C // MSI - RW +#define FCH_EHCI_REG50 0x50 // EHCI Misc Control - RW +#define FCH_EHCI_REG54 0x54 // EHCI Misc Control - RW +#define FCH_EHCI_REG60 0x60 // SBRN - R +#define FCH_EHCI_REG61 0x61 // FLADJ - RW +#define FCH_EHCI_REG62 0x62 // PORTWAKECAP - RW +#define FCH_EHCI_REG74 0x74 // EHCI Misc Control2 - RW +#define FCH_EHCI_REG84 0x84 // HUB Configure 1 - RW +#define FCH_EHCI_REG88 0x88 // - RW +#define FCH_EHCI_REG90 0x90 // HUB Configure 4 - RW +#define FCH_EHCI_REGC0 0x0C0 // PME control - RW (800) +#define FCH_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800) +#define FCH_EHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_EHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_EHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_EHCI_REGE4 0x0E4 // EHCI Debug Port Support - RW (800) +#define FCH_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800) +#define FCH_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800) + +#define FCH_EHCI_BAR_REG00 0x00 // CAPLENGT - R +#define FCH_EHCI_BAR_REG02 0x002 // CIVERSION- R +#define FCH_EHCI_BAR_REG04 0x004 // CSPARAMS - R +#define FCH_EHCI_BAR_REG08 0x008 // CCPARAMS - R +#define FCH_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R + +#define FCH_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits +#define FCH_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits +#define FCH_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits +#define FCH_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits +#define FCH_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits +#define FCH_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits +#define FCH_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits +#define FCH_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits +#define FCH_EHCI_BAR_REG64 0x064 // PORTSC (1-N_PORTS) -RW - 32 bits +#define FCH_EHCI_BAR_REGA0 0x0A0 // DebugPort MISC Control - RW - 32 bits (800) +#define FCH_EHCI_BAR_REGA4 0x0A4 // Packet Buffer Threshold Values - RW - 32 bits +#define FCH_EHCI_BAR_REGA8 0x0A8 // USB PHY Status 0 - R +#define FCH_EHCI_BAR_REGAC 0x0AC // USB PHY Status 1 - R +#define FCH_EHCI_BAR_REGB0 0x0B0 // USB PHY Status 2 - R +#define FCH_EHCI_BAR_REGB4 0x0B4 // UTMI Control - RW (800) +#define FCH_EHCI_BAR_REGB8 0x0B8 // Loopback Test +#define FCH_EHCI_BAR_REGBC 0x0BC // EHCI MISC Control +#define FCH_EHCI_BAR_REGC0 0x0C0 // USB PHY Calibration +#define FCH_EHCI_BAR_REGC4 0x0C4 // USB Common PHY Control +#define FCH_EHCI_BAR_REGC8 0x0C8 // EHCI Debug Purpose +#define FCH_EHCI_BAR_REGCC 0x0CC // Ehci Spare 1 (800) ** +#define FCH_EHCI_BAR_REGD0 0x0D0 +#define FCH_EHCI_BAR_REGD4 0x0D4 +#define FCH_EHCI_BAR_REG100 0x100 // USB debug port + +// +// USB XHCI Device 0x7812/0x7814 +// Device 16 (0x10) Func 0/1 +// +#define FCH_XHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_XHCI_REG04 0x04 // Command - RW +#define FCH_XHCI_REG10 0x10 // Bar0 +#define FCH_XHCI_REG2C 0x2C // Sub System ID +#define FCH_XHCI_REG40 0x40 // Index0 +#define FCH_XHCI_REG44 0x44 // Data0 +#define FCH_XHCI_REG48 0x48 // Index1 +#define FCH_XHCI_REG4C 0x4C // Data0 +#define FCH_XHCI_REG54 0x54 // PME Control/Status +#define XHCI_EFUSE_LOCATION 0x18 // EFUSE bit 192, 193 + +#define FCH_XHCI_BAR_REG420 0x420 // Port Status and Control +#define FCH_XHCI_PORTSC_CCS 0x1 // Port Status and Control +#define FCH_XHCI_PORTSC_PED 0x2 // Port Status and Control +#define FCH_XHCI_PORTSC_PLS 0x1E0 // Port Status and Control +#define FCH_XHCI_PORTSC_SPEED 0x3C00 // Port Status and Control +#define FCH_XHCI_PORTSC_PR 0x10 // Port Status and Control + +// +// FCH CFG device 0x780B +// Device 20 (0x14) Func 0 +// +#define FCH_CFG_REG00 0x000 // VendorID - R +#define FCH_CFG_REG02 0x002 // DeviceID - R +#define FCH_CFG_REG04 0x004 // Command- RW +#define FCH_CFG_REG05 0x005 // Command- RW +#define FCH_CFG_REG06 0x006 // STATUS- RW +#define FCH_CFG_REG08 0x008 // Revision ID/Class Code- R +#define FCH_CFG_REG0A 0x00A // +#define FCH_CFG_REG0B 0x00B // +#define FCH_CFG_REG0C 0x00C // Cache Line Size- R +#define FCH_CFG_REG0D 0x00D // Latency Timer- R +#define FCH_CFG_REG0E 0x00E // Header Type- R +#define FCH_CFG_REG0F 0x00F // BIST- R +#define FCH_CFG_REG10 0x010 // Base Address 0- R +#define FCH_CFG_REG11 0x011 //; +#define FCH_CFG_REG12 0x012 //; +#define FCH_CFG_REG13 0x013 //; +#define FCH_CFG_REG14 0x014 // Base Address 1- R +#define FCH_CFG_REG18 0x018 // Base Address 2- R +#define FCH_CFG_REG1C 0x01C // Base Address 3- R +#define FCH_CFG_REG20 0x020 // Base Address 4- R +#define FCH_CFG_REG24 0x024 // Base Address 5- R +#define FCH_CFG_REG28 0x028 // Cardbus CIS Pointer- R +#define FCH_CFG_REG2C 0x02C // Subsystem Vendor ID- W +#define FCH_CFG_REG2E 0x02E // Subsystem ID- W +#define FCH_CFG_REG30 0x030 // Expansion ROM Base Address - R +#define FCH_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00 +#define FCH_CFG_REG3C 0x03C // Interrupt Line - R +#define FCH_CFG_REG3D 0x03D // Interrupt Pin - R +#define FCH_CFG_REG3E 0x03E // Min_Gnt - R +#define FCH_CFG_REG3F 0x03F // Max_Lat - R +#define FCH_CFG_REG90 0x090 // Smbus Base Address - R +#define FCH_CFG_REG9C 0x09C // SBResourceMMIO_BASE + +// +// FCH SATA IDE device +// Device 20 (0x14) Func 1 +// + +#define FCH_IDE_REG00 0x00 // Vendor ID +#define FCH_IDE_REG02 0x02 // Device ID +#define FCH_IDE_REG04 0x04 // Command +#define FCH_IDE_REG06 0x06 // Status +#define FCH_IDE_REG08 0x08 // Revision ID/Class Code +#define FCH_IDE_REG09 0x09 // Class Code +#define FCH_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID +#define FCH_IDE_REG40 0x40 // Configuration - RW - 32 bits +#define FCH_IDE_REG34 0x34 +#define FCH_IDE_REG62 0x62 // IDE Internal Control +#define FCH_IDE_REG63 0x63 // IDE Internal Control +// +// FCH AZALIA device 0x780D +// Device 20 (0x14) Func 2 +// +#define ATI_AZALIA_ExtBlk_Addr 0x0F8 +#define ATI_AZALIA_ExtBlk_DATA 0x0FC + +#define FCH_AZ_REG00 0x00 // Vendor ID - R +#define FCH_AZ_REG02 0x02 // Device ID - R/W +#define FCH_AZ_REG04 0x04 // PCI Command +#define FCH_AZ_REG06 0x06 // PCI Status - R/W +#define FCH_AZ_REG08 0x08 // Revision ID +#define FCH_AZ_REG09 0x09 // Programming Interface +#define FCH_AZ_REG0A 0x0A // Sub Class Code +#define FCH_AZ_REG0B 0x0B // Base Class Code +#define FCH_AZ_REG0C 0x0C // Cache Line Size - R/W +#define FCH_AZ_REG0D 0x0D // Latency Timer +#define FCH_AZ_REG0E 0x0E // Header Type +#define FCH_AZ_REG0F 0x0F // BIST +#define FCH_AZ_REG10 0x10 // Lower Base Address Register +#define FCH_AZ_REG14 0x14 // Upper Base Address Register +#define FCH_AZ_REG2C 0x2C // Subsystem Vendor ID +#define FCH_AZ_REG2D 0x2D // Subsystem ID +#define FCH_AZ_REG34 0x34 // Capabilities Pointer +#define FCH_AZ_REG3C 0x3C // Interrupt Line +#define FCH_AZ_REG3D 0x3D // Interrupt Pin +#define FCH_AZ_REG3E 0x3E // Minimum Grant +#define FCH_AZ_REG3F 0x3F // Maximum Latency +#define FCH_AZ_REG40 0x40 // Misc Control 1 +#define FCH_AZ_REG42 0x42 // Misc Control 2 Register +#define FCH_AZ_REG43 0x43 // Misc Control 3 Register +#define FCH_AZ_REG44 0x44 // Interrupt Pin Control Register +#define FCH_AZ_REG46 0x46 // Debug Control Register +#define FCH_AZ_REG4C 0x4C +#define FCH_AZ_REG50 0x50 // Power Management Capability ID +#define FCH_AZ_REG52 0x52 // Power Management Capabilities +#define FCH_AZ_REG54 0x54 // Power Management Control/Status +#define FCH_AZ_REG60 0x60 // MSI Capability ID +#define FCH_AZ_REG62 0x62 // MSI Message Control +#define FCH_AZ_REG64 0x64 // MSI Message Lower Address +#define FCH_AZ_REG68 0x68 // MSI Message Upper Address +#define FCH_AZ_REG6C 0x6C // MSI Message Data + +#define FCH_AZ_BAR_REG00 0x00 // Global Capabilities - R +#define FCH_AZ_BAR_REG02 0x02 // Minor Version - R +#define FCH_AZ_BAR_REG03 0x03 // Major Version - R +#define FCH_AZ_BAR_REG04 0x04 // Output Payload Capability - R +#define FCH_AZ_BAR_REG06 0x06 // Input Payload Capability - R +#define FCH_AZ_BAR_REG08 0x08 // Global Control - R/W +#define FCH_AZ_BAR_REG0C 0x0C // Wake Enable - R/W +#define FCH_AZ_BAR_REG0E 0x0E // State Change Status - R/W +#define FCH_AZ_BAR_REG10 0x10 // Global Status - R/W +#define FCH_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R +#define FCH_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R +#define FCH_AZ_BAR_REG20 0x20 // Interrupt Control - R/W +#define FCH_AZ_BAR_REG24 0x24 // Interrupt Status - R/W +#define FCH_AZ_BAR_REG30 0x30 // Wall Clock Counter - R +#define FCH_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W +#define FCH_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W +#define FCH_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW +#define FCH_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W +#define FCH_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W +#define FCH_AZ_BAR_REG4C 0x4C // CORB Control - R/W +#define FCH_AZ_BAR_REG4D 0x4D // CORB Status - R/W +#define FCH_AZ_BAR_REG4E 0x4E // CORB Size - R/W +#define FCH_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW +#define FCH_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW +#define FCH_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW +#define FCH_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W +#define FCH_AZ_BAR_REG5C 0x5C // RIRB Control - R/W +#define FCH_AZ_BAR_REG5D 0x5D // RIRB Status - R/W +#define FCH_AZ_BAR_REG5E 0x5E // RIRB Size - R/W +#define FCH_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W +#define FCH_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W +#define FCH_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W +#define FCH_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R + +// +// FCH LPC Device 0x780E +// Device 20 (0x14) Func 3 +// +#define FCH_LPC_REG00 0x00 // VID- R +#define FCH_LPC_REG02 0x02 // DID- R +#define FCH_LPC_REG04 0x04 // CMD- RW +#define FCH_LPC_REG06 0x06 // STATUS- RW +#define FCH_LPC_REG08 0x08 // Revision ID/Class Code - R +#define FCH_LPC_REG0C 0x0C // Cache Line Size - R +#define FCH_LPC_REG0D 0x0D // Latency Timer - R +#define FCH_LPC_REG0E 0x0E // Header Type - R +#define FCH_LPC_REG0F 0x0F // BIST- R +#define FCH_LPC_REG10 0x10 // Base Address Reg 0- RW* +#define FCH_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro +#define FCH_LPC_REG34 0x34 // Capabilities Pointer - Ro +#define FCH_LPC_REG40 0x40 // PCI Control - RW +#define FCH_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW +#define FCH_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW +#define FCH_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW +#define FCH_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW +#define FCH_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW +#define FCH_LPC_REG49 0x49 // LPC Sync Timeout Count - RW +#define FCH_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW +#define FCH_LPC_REG4C 0x4C // Memory Range Register - RW +#define FCH_LPC_REG50 0x50 // Rom Protect 0 - RW +#define FCH_LPC_REG54 0x54 // Rom Protect 1 - RW +#define FCH_LPC_REG58 0x58 // Rom Protect 2 - RW +#define FCH_LPC_REG5C 0x5C // Rom Protect 3 - RW +#define FCH_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles - +#define FCH_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles - +#define FCH_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW +#define FCH_LPC_REG65 0x65 +#define FCH_LPC_REG66 0x66 +#define FCH_LPC_REG67 0x67 +#define FCH_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW +#define FCH_LPC_REG69 0x69 +#define FCH_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW +#define FCH_LPC_REG6B 0x6B +#define FCH_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW +#define FCH_LPC_REG6D 0x6D +#define FCH_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW +#define FCH_LPC_REG6F 0x6F +#define FCH_LPC_REG70 0x70 // Firmware ub Select - RW* +#define FCH_LPC_REG71 0x71 +#define FCH_LPC_REG72 0x72 +#define FCH_LPC_REG73 0x73 +#define FCH_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R +#define FCH_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R +#define FCH_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R +#define FCH_LPC_REG9C 0x9C +#define FCH_LPC_REG80 0x80 // MSI Capability Register- R +#define FCH_LPC_REGA0 0x0A0 // SPI base address +#define FCH_LPC_REGA1 0x0A1 // SPI base address +#define FCH_LPC_REGA2 0x0A2 // SPI base address +#define FCH_LPC_REGA3 0x0A3 // SPI base address +#define FCH_LPC_REGA4 0x0A4 +#define FCH_LPC_REGB8 0x0B8 +#define FCH_LPC_REGBA 0x0BA // EcControl +#define FCH_LPC_REGBB 0x0BB // HostControl +#define FCH_LPC_REGC8 0x0C8 +#define FCH_LPC_REGCC 0x0CC // AutoRomCfg +#define FCH_LPC_REGD0 0x0D0 +#define FCH_LPC_REGD3 0x0D3 +#define FCH_LPC_REGD4 0x0D4 + +// +// FCH PCIB 0x780F +// Device 20 (0x14) Func 4 +// +#define FCH_PCIB_REG04 0x04 // Command +#define FCH_PCIB_REG0D 0x0D // Primary Master Latency Timer +#define FCH_PCIB_REG1B 0x1B // Secondary Latency Timer +#define FCH_PCIB_REG1C 0x1C // IO Base +#define FCH_PCIB_REG1D 0x1D // IO Limit +#define FCH_PCIB_REG40 0x40 // CPCTRL +#define FCH_PCIB_REG42 0x42 // CLKCTRL +#define FCH_PCIB_REG48 0x48 // +#define FCH_PCIB_REG4A 0x4A // PCICLK Enable Bits +#define FCH_PCIB_REG4B 0x4B // Misc Control +#define FCH_PCIB_REG4C 0x4C // AutoClockRun Control +#define FCH_PCIB_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop Override +#define FCH_PCIB_REG65 0x65 // Misc Control +#define FCH_PCIB_REG66 0x66 // Misc Control +// +// FCH GEC 0x14E4 0x1699 +// Device 20 (0x14) Func 6 +// +#define FCH_GEC_REG10 0x10 // GEC BAR + +// +// FCH SD +// Device 20 (0x14) Func 7 +// +#define SD_PCI_REG10 0x10 +#define SD_PCI_REG2C 0x2C +#define SD_PCI_REGA4 0xA4 +#define SD_PCI_REGA8 0xA8 +#define SD_PCI_REGAC 0xAC +#define SD_PCI_REGB0 0xB0 +#define SD_PCI_REGB8 0xB8 +#define SD_PCI_REGBC 0xBC +#define SD_PCI_REGD0 0xD0 +#define SD_PCI_REGF0 0xF0 +#define SD_PCI_REGF4 0xF4 +#define SD_PCI_REGF8 0xF8 +#define SD_PCI_REGFC 0xFC +#define FCH_SD_BAR_REG28 0x28 // SDHC_CTRL1 +#define SD_CARD_PRESENT BIT0 +#define FCH_SD_BAR_REG2C 0x2C // SDHC_CTRL2 +#define FCH_SD_FREQUENCY_SLT BIT2 +#define FCH_SD_BAR_REG3C 0x3C // SDHC_HOST_CTRL2 +#define FCH_SD_1_8V BIT3 + +// +// FCH MMIO Base (SMI) +// offset : 0x200 +// +#define FCH_SMI_REG00 0x00 // EventStatus +#define FCH_SMI_REG04 0x04 // EventEnable +#define FCH_SMI_REG08 0x08 // SciTrig +#define FCH_SMI_REG0C 0x0C // SciLevl +#define FCH_SMI_REG10 0x10 // SmiSciStatus +#define FCH_SMI_REG14 0x14 // SmiSciEn +#define FCH_SMI_REG18 0x18 // ForceSciEn +#define FCH_SMI_REG1C 0x1C // SciRwData +#define FCH_SMI_REG3C 0x3C // DataErrorStatus +#define FCH_SMI_REG20 0x20 // SciS0En +#define FCH_SMI_Gevent0 0x40 // SciMap0 +#define FCH_SMI_Gevent1 0x41 // SciMap1 +#define FCH_SMI_Gevent2 0x42 // SciMap2 +#define FCH_SMI_Gevent3 0x43 // SciMap3 +#define FCH_SMI_Gevent4 0x44 // SciMap4 +#define FCH_SMI_Gevent5 0x45 // SciMap5 +#define FCH_SMI_Gevent6 0x46 // SciMap6 +#define FCH_SMI_Gevent7 0x47 // SciMap7 +#define FCH_SMI_Gevent8 0x48 // SciMap8 +#define FCH_SMI_Gevent9 0x49 // SciMap9 +#define FCH_SMI_Gevent10 0x4A // SciMap10 +#define FCH_SMI_Gevent11 0x4B // SciMap11 +#define FCH_SMI_Gevent12 0x4C // SciMap12 +#define FCH_SMI_Gevent13 0x4D // SciMap13 +#define FCH_SMI_Gevent14 0x4E // SciMap14 +#define FCH_SMI_Gevent15 0x4F // SciMap15 +#define FCH_SMI_Gevent16 0x50 // SciMap16 +#define FCH_SMI_Gevent17 0x51 // SciMap17 +#define FCH_SMI_Gevent18 0x52 // SciMap18 +#define FCH_SMI_Gevent19 0x53 // SciMap19 +#define FCH_SMI_Gevent20 0x54 // SciMap20 +#define FCH_SMI_Gevent21 0x55 // SciMap21 +#define FCH_SMI_Gevent22 0x56 // SciMap22 +#define FCH_SMI_Gevent23 0x57 // SciMap23 +#define FCH_SMI_Usbwakup0 0x58 // SciMap24 +#define FCH_SMI_Usbwakup1 0x59 // SciMap25 +#define FCH_SMI_Usbwakup2 0x5A // SciMap26 +#define FCH_SMI_Usbwakup3 0x5B // SciMap27 +#define FCH_SMI_SBGppPme0 0x5C // SciMap28 +#define FCH_SMI_SBGppPme1 0x5D // SciMap29 +#define FCH_SMI_SBGppPme2 0x5E // SciMap30 +#define FCH_SMI_SBGppPme3 0x5F // SciMap31 +#define FCH_SMI_SBGppHp0 0x60 // SciMap32 +#define FCH_SMI_SBGppHp1 0x61 // SciMap33 +#define FCH_SMI_SBGppHp2 0x62 // SciMap34 +#define FCH_SMI_SBGppHp3 0x63 // SciMap35 +#define FCH_SMI_AzaliaPme 0x64 // SciMap36 +#define FCH_SMI_SataGevent0 0x65 // SciMap37 +#define FCH_SMI_SataGevent1 0x66 // SciMap38 +#define FCH_SMI_GecPme 0x67 // SciMap39 +#define FCH_SMI_IMCGevent0 0x68 // SciMap40 +#define FCH_SMI_IMCGevent1 0x69 // SciMap41 +#define FCH_SMI_CIRPme 0x6A // SciMap42 +#define FCH_SMI_WakePinGevent 0x6B // SciMap43 +#define FCH_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent +#define FCH_SMI_ASFMasterIntr 0x6D // SciMap45 +#define FCH_SMI_ASFSlaveIntr 0x6E // SciMap46 +#define FCH_SMI_SMBUS0 0x6F // SciMap47 +#define FCH_SMI_TWARN 0x70 // SciMap48 +#define FCH_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr +#define FCH_SMI_iLLB 0x72 // SciMap50 +#define FCH_SMI_PowerButton 0x73 // SciMap51 +#define FCH_SMI_ProcHot 0x74 // SciMap52 +#define FCH_SMI_APUHwAssertion 0x75 // SciMap53 +#define FCH_SMI_APUSciAssertion 0x76 // SciMap54 +#define FCH_SMI_RAS 0x77 // SciMap55 +#define FCH_SMI_xHC0Pme 0x78 // SciMap56 +#define FCH_SMI_xHC1Pme 0x79 // SciMap57 +#define FCH_SMI_AcDcWake 0x7A // SciMap58 + +// Empty from 0x72-0x7F +//#Define FCH_SMI_REG7C 0x7F // SciMap63 *** + +#define FCH_SMI_REG80 0x80 // SmiStatus0 +#define FCH_SMI_REG84 0x84 // SmiStatus1 +#define FCH_SMI_REG88 0x88 // SmiStatus2 +#define FCH_SMI_REG8C 0x8C // SmiStatus3 +#define FCH_SMI_REG90 0x90 // SmiStatus4 +#define FCH_SMI_REG94 0x94 // SmiPointer +#define FCH_SMI_REG96 0x96 // SmiTimer +#define FCH_SMI_REG98 0x98 // SmiTrig +#define FCH_SMI_REG9C 0x9C // SmiTrig +#define FCH_SMI_REGA0 0xA0 +#define FCH_SMI_REGA1 0xA1 +#define FCH_SMI_REGA2 0xA2 +#define FCH_SMI_REGA3 0xA3 +#define FCH_SMI_REGA4 0xA4 +#define FCH_SMI_REGA5 0xA5 +#define FCH_SMI_REGA6 0xA6 +#define FCH_SMI_REGA7 0xA7 +#define FCH_SMI_REGA8 0xA8 +#define FCH_SMI_REGA9 0xA9 +#define FCH_SMI_REGAA 0xAA +#define FCH_SMI_REGAB 0xAB +#define FCH_SMI_REGAC 0xAC +#define FCH_SMI_REGAD 0xAD +#define FCH_SMI_REGAE 0xAE +#define FCH_SMI_REGAF 0xAF +#define FCH_SMI_REGB0 0xB0 +#define FCH_SMI_REGB1 0xB1 +#define FCH_SMI_REGB2 0xB2 +#define FCH_SMI_REGB3 0xB3 +#define FCH_SMI_REGB4 0xB4 +#define FCH_SMI_REGB5 0xB5 +#define FCH_SMI_REGB6 0xB6 +#define FCH_SMI_REGB7 0xB7 +#define FCH_SMI_REGB8 0xB8 +#define FCH_SMI_REGB9 0xB9 +#define FCH_SMI_REGBA 0xBA +#define FCH_SMI_REGBB 0xBB +#define FCH_SMI_REGBC 0xBC +#define FCH_SMI_REGBD 0xBD +#define FCH_SMI_REGBE 0xBE +#define FCH_SMI_REGBF 0xBF +#define FCH_SMI_REGC0 0xC0 +#define FCH_SMI_REGC1 0xC1 +#define FCH_SMI_REGC2 0xC2 +#define FCH_SMI_REGC3 0xC3 +#define FCH_SMI_REGC4 0xC4 +#define FCH_SMI_REGC5 0xC5 +#define FCH_SMI_REGC6 0xC6 +#define FCH_SMI_REGC7 0xC7 +#define FCH_SMI_REGC8 0xC8 +#define FCH_SMI_REGCA 0xCA // IoTrapping1 +#define FCH_SMI_REGCC 0xCC // IoTrapping2 +#define FCH_SMI_REGCE 0xCE // IoTrapping3 +#define FCH_SMI_TRAPPING_WRITE 0x01 +#define FCH_SMI_REGD0 0xD0 // MemTrapping0 +#define FCH_SMI_REGD4 0xD4 // MemRdOvrData0 +#define FCH_SMI_REGD8 0xD8 // MemTrapping1 +#define FCH_SMI_REGDC 0xDC // MemRdOvrData1 +#define FCH_SMI_REGE0 0xE0 // MemTrapping2 +#define FCH_SMI_REGE4 0xE4 // MemRdOvrData2 +#define FCH_SMI_REGE8 0xE8 // MemTrapping3 +#define FCH_SMI_REGEC 0xEC // MemRdOvrData3 +#define FCH_SMI_REGF0 0xF0 // CfgTrapping0 +#define FCH_SMI_REGF4 0xF4 // CfgTrapping1 +#define FCH_SMI_REGF8 0xF8 // CfgTrapping2 +#define FCH_SMI_REGFC 0xFC // CfgTrapping3 + +// +// FCH MMIO Base (PMIO) +// offset : 0x300 +// +#define FCH_PMIOA_REG00 0x00 // ISA Decode +#define FCH_PMIOA_REG04 0x04 // ISA Control +#define FCH_PMIOA_REG08 0x08 // PCI Control +#define FCH_PMIOA_REG0C 0x0C // StpClkSmaf +#define FCH_PMIOA_REG10 0x10 // RetryDetect +#define FCH_PMIOA_REG14 0x14 // StuckDetect +#define FCH_PMIOA_REG20 0x20 // BiosRamEn +#define FCH_PMIOA_REG24 0x24 // AcpiMmioEn +#define FCH_PMIOA_REG28 0x28 // AsfEn +#define FCH_PMIOA_REG2C 0x2C // Smbus0En +#define FCH_PMIOA_REG2E 0x2E // Smbus0Sel +#define FCH_PMIOA_REG34 0x34 // IoApicEn +#define FCH_PMIOA_REG3C 0x3C // SmartVoltEn +#define FCH_PMIOA_REG40 0x40 // SmartVolt2En +#define FCH_PMIOA_REG44 0x44 // BootTimerEn +#define FCH_PMIOA_REG48 0x48 // WatchDogTimerEn +#define FCH_PMIOA_REG4C 0x4C // WatchDogTimerConfig +#define FCH_PMIOA_REG50 0x50 // HPETEn +#define FCH_PMIOA_REG54 0x54 // SerialIrqConfig +#define FCH_PMIOA_REG56 0x56 // RtcControl +#define FCH_PMIOA_REG58 0x58 // VRT_T1 +#define FCH_PMIOA_REG59 0x59 // VRT_T2 +#define FCH_PMIOA_REG5A 0x5A // IntruderControl +#define FCH_PMIOA_REG5B 0x5B // RtcShadow +#define FCH_PMIOA_REG5C 0x5C +#define FCH_PMIOA_REG5D 0x5D +#define FCH_PMIOA_REG5E 0x5E // RtcExtIndex +#define FCH_PMIOA_REG5F 0x5F // RtcExtData +#define FCH_PMIOA_REG60 0x60 // AcpiPm1EvtBlk +#define FCH_PMIOA_REG62 0x62 // AcpiPm1CntBlk +#define FCH_PMIOA_REG64 0x64 // AcpiPmTmrBlk +#define FCH_PMIOA_REG66 0x66 // P_CNTBlk +#define FCH_PMIOA_REG68 0x68 // AcpiGpe0Blk +#define FCH_PMIOA_REG6A 0x6A // AcpiSmiCmd +#define FCH_PMIOA_REG6C 0x6C // AcpiPm2CntBlk +#define FCH_PMIOA_REG6E 0x6E // AcpiPmaCntBlk +#define FCH_PMIOA_REG74 0x74 // AcpiConfig +#define FCH_PMIOA_REG78 0x78 // WakeIoAddr +#define FCH_PMIOA_REG7A 0x7A // HaltCountEn +#define FCH_PMIOA_REG7C 0x7C // C1eWrPortAdr +#define FCH_PMIOA_REG7E 0x7E // CStateEn +#define FCH_PMIOA_REG7F 0x7F // CStateEn +#define FCH_PMIOA_REG80 0x80 // BreakEvent +#define FCH_PMIOA_REG84 0x84 // AutoArbEn +#define FCH_PMIOA_REG88 0x88 // CStateControl +#define FCH_PMIOA_REG89 0x89 // +#define FCH_PMIOA_REG8C 0x8C // StpClkHoldTime +#define FCH_PMIOA_REG8E 0x8E // PopUpEndTime +#define FCH_PMIOA_REG90 0x90 // C4Control +#define FCH_PMIOA_REG94 0x94 // CStateTiming0 +#define FCH_PMIOA_REG96 0x96 // +#define FCH_PMIOA_REG97 0x97 // +#define FCH_PMIOA_REG98 0x98 // CStateTiming1 +#define FCH_PMIOA_REG99 0x99 // +#define FCH_PMIOA_REG9B 0x9B // +#define FCH_PMIOA_REG9C 0x9C // C2Count +#define FCH_PMIOA_REG9D 0x9D // C3Count +#define FCH_PMIOA_REG9E 0x9E // C4Count +#define FCH_PMIOA_REGA0 0xA0 // MessageCState +#define FCH_PMIOA_REGA4 0xA4 // +#define FCH_PMIOA_REGA8 0xA8 // TrafficMonitorIdleTime +#define FCH_PMIOA_REGAA 0xAA // TrafficMonitorIntTime +#define FCH_PMIOA_REGAC 0xAC // TrafficMonitorTrafficCount +#define FCH_PMIOA_REGAE 0xAE // TrafficMonitorIntrCount +#define FCH_PMIOA_REGB0 0xB0 // TrafficMonitorTimeTick +#define FCH_PMIOA_REGB4 0xB4 // FidVidControl +#define FCH_PMIOA_REGB6 0xB6 // TPRESET1 +#define FCH_PMIOA_REGB7 0xB7 // Tpreset1b +#define FCH_PMIOA_REGB8 0xB8 // TPRESET2 +#define FCH_PMIOA_REGB9 0xB9 // Test0 +#define FCH_PMIOA_REGBA 0xBA // S_StateControl +#define FCH_PMIOA_REGBB 0xBB // +#define FCH_PMIOA_REGBC 0xBC // ThrottlingControl +#define FCH_PMIOA_REGBE 0xBE // ResetControl +#define FCH_PMIOA_REGBF 0xBF // ResetControl +#define FCH_PMIOA_REGC0 0xC0 // S5Status +#define FCH_PMIOA_REGC2 0xC2 // ResetStatus +#define FCH_PMIOA_REGC4 0xC4 // ResetCommand +#define FCH_PMIOA_REGC5 0xC5 // CF9Shadow +#define FCH_PMIOA_REGC6 0xC6 // HTControl +#define FCH_PMIOA_REGC8 0xC8 // Misc +#define FCH_PMIOA_REGCC 0xCC // IoDrvSth +#define FCH_PMIOA_REGD0 0xD0 // CLKRunEn +#define FCH_PMIOA_REGD2 0xD2 // PmioDebug +#define FCH_PMIOA_REGD3 0xD3 // SD +#define FCH_PMIOA_REGD6 0xD6 // IMCGating +#define FCH_PMIOA_REGD7 0xD7 // +#define FCH_PMIOA_REGD8 0xD8 // MiscIndex +#define FCH_PMIOA_REGD9 0xD9 // MiscData +#define FCH_PMIOA_REGDA 0xDA // SataConfig +#define FCH_PMIOA_REGDC 0xDC // HyperFlashConfig +#define FCH_PMIOA_REGDE 0xDE // ABConfig +#define FCH_PMIOA_REGE0 0xE0 // ABRegBar +#define FCH_PMIOA_REGE4 0xE4 +#define FCH_PMIOA_REGE6 0xE6 // FcEn +#define FCH_PMIOA_REGE7 0xE7 +#define FCH_PMIOA_REGE8 0xE8 +#define FCH_PMIOA_REGEA 0xEA // PcibConfig +#define FCH_PMIOA_REGEB 0xEB // AzEn +#define FCH_PMIOA_REGEC 0xEC // LpcGating +#define FCH_PMIOA_REGED 0xED // UsbGating +#define FCH_PMIOA_REGEE 0xEE // UsbCntrl +#define FCH_PMIOA_REGEF 0xEF // UsbEnable +#define FCH_PMIOA_REGF0 0xF0 // UsbControl +#define FCH_PMIOA_REGF2 0xF2 // UsbControl2 +#define FCH_PMIOA_REGF3 0xF3 // UsbDebug +#define FCH_PMIOA_REGF4 0xF4 // UsbDebug +#define FCH_PMIOA_REGF6 0xF6 // GecEn +#define FCH_PMIOA_REGF8 0xF8 // GecConfig +#define FCH_PMIOA_REGFC 0xFC // TraceMemoryEn + +// +// FCH MMIO Base (PMIO2) +// offset : 0x400 +// +#define FCH_PMIO2_REG00 0x00 // Fan0InputControl +#define FCH_PMIO2_REG01 0x01 // Fan0Control +#define FCH_PMIO2_REG02 0x02 // Fan0Freq +#define FCH_PMIO2_REG03 0x03 // LowDuty0 +#define FCH_PMIO2_REG04 0x04 // MidDuty0 + +#define FCH_PMIO2_REG10 0x00 // Fan1InputControl +#define FCH_PMIO2_REG11 0x01 // Fan1Control +#define FCH_PMIO2_REG12 0x02 // Fan1Freq +#define FCH_PMIO2_REG13 0x03 // LowDuty1 +#define FCH_PMIO2_REG14 0x04 // MidDuty1 + +#define FCH_PMIO2_REG63 0x63 // SampleFreqDiv +#define FCH_PMIO2_REG69 0x69 // Fan0 Speed +#define FCH_PMIO2_REG95 0x95 // Temperature +#define FCH_PMIO2_REGB8 0xB8 // Voltage +#define FCH_PMIO2_REGEA 0xEA // Hwm_Calibration + +#define FCH_PMIO2_REG92 0x92 // +#define FCH_PMIO2_REGF8 0xF8 // VoltageSamleSel +#define FCH_PMIO2_REGF9 0xF9 // TempSampleSel + +#define FCH_PMIO2_REG 0xFC // TraceMemoryEn + + +// +// FCH MMIO Base (GPIO/IoMux) +// offset : 0x100/0xD00 +// +/* +GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226. +*/ +#define FCH_GPIO_REG00 0x00 +#define FCH_GPIO_REG06 0x06 +#define FCH_GPIO_REG09 0x09 +#define FCH_GPIO_REG10 0x0A +#define FCH_GPIO_REG17 0x11 +#define FCH_GPIO_REG21 0x15 +#define FCH_GPIO_REG28 0x1C +#define FCH_GPIO_REG32 0x20 +#define FCH_GPIO_REG33 0x21 +#define FCH_GPIO_REG34 0x22 +#define FCH_GPIO_REG35 0x23 +#define FCH_GPIO_REG36 0x24 +#define FCH_GPIO_REG37 0x25 +#define FCH_GPIO_REG38 0x26 +#define FCH_GPIO_REG39 0x27 +#define FCH_GPIO_REG40 0x28 +#define FCH_GPIO_REG41 0x29 +#define FCH_GPIO_REG42 0x2A +#define FCH_GPIO_REG43 0x2B +#define FCH_GPIO_REG44 0x2C +#define FCH_GPIO_REG45 0x2D +#define FCH_GPIO_REG46 0x2E +#define FCH_GPIO_REG47 0x2F +#define FCH_GPIO_REG48 0x30 +#define FCH_GPIO_REG49 0x31 +#define FCH_GPIO_REG50 0x32 +#define FCH_GPIO_REG51 0x33 +#define FCH_GPIO_REG52 0x34 +#define FCH_GPIO_REG53 0x35 +#define FCH_GPIO_REG54 0x36 +#define FCH_GPIO_REG55 0x37 +#define FCH_GPIO_REG56 0x38 +#define FCH_GPIO_REG57 0x39 +#define FCH_GPIO_REG58 0x3A +#define FCH_GPIO_REG59 0x3B +#define FCH_GPIO_REG60 0x3C +#define FCH_GPIO_REG61 0x3D +#define FCH_GPIO_REG62 0x3E +#define FCH_GPIO_REG63 0x3F +#define FCH_GPIO_REG64 0x40 +#define FCH_GPIO_REG65 0x41 +#define FCH_GPIO_REG66 0x42 +#define FCH_GPIO_REG67 0x43 +#define FCH_GPIO_REG68 0x44 +#define FCH_GPIO_REG69 0x45 +#define FCH_GPIO_REG70 0x46 +#define FCH_GPIO_REG71 0x47 +#define FCH_GPIO_REG72 0x48 +#define FCH_GPIO_REG73 0x49 +#define FCH_GPIO_REG74 0x4A +#define FCH_GPIO_REG75 0x4B +#define FCH_GPIO_REG76 0x4C +#define FCH_GPIO_REG77 0x4D +#define FCH_GPIO_REG78 0x4E +#define FCH_GPIO_REG79 0x4F +#define FCH_GPIO_REG80 0x50 + +#define FCH_GEVENT_REG00 0x60 +#define FCH_GEVENT_REG01 0x61 +#define FCH_GEVENT_REG02 0x62 +#define FCH_GEVENT_REG03 0x63 +#define FCH_GEVENT_REG04 0x64 +#define FCH_GEVENT_REG05 0x65 +#define FCH_GEVENT_REG06 0x66 +#define FCH_GEVENT_REG07 0x67 +#define FCH_GEVENT_REG08 0x68 +#define FCH_GEVENT_REG09 0x69 +#define FCH_GEVENT_REG10 0x6A +#define FCH_GEVENT_REG11 0x6B +#define FCH_GEVENT_REG12 0x6C +#define FCH_GEVENT_REG13 0x6D +#define FCH_GEVENT_REG14 0x6E +#define FCH_GEVENT_REG15 0x6F +#define FCH_GEVENT_REG16 0x70 +#define FCH_GEVENT_REG17 0x71 +#define FCH_GEVENT_REG18 0x72 +#define FCH_GEVENT_REG19 0x73 +#define FCH_GEVENT_REG20 0x74 +#define FCH_GEVENT_REG21 0x75 +#define FCH_GEVENT_REG22 0x76 +#define FCH_GEVENT_REG23 0x77 +// S5-DOMAIN GPIO +#define FCH_GPIO_REG160 0xA0 +#define FCH_GPIO_REG161 0xA1 +#define FCH_GPIO_REG162 0xA2 +#define FCH_GPIO_REG163 0xA3 +#define FCH_GPIO_REG164 0xA4 +#define FCH_GPIO_REG165 0xA5 +#define FCH_GPIO_REG166 0xA6 +#define FCH_GPIO_REG167 0xA7 +#define FCH_GPIO_REG168 0xA8 +#define FCH_GPIO_REG169 0xA9 +#define FCH_GPIO_REG170 0xAA +#define FCH_GPIO_REG171 0xAB +#define FCH_GPIO_REG172 0xAC +#define FCH_GPIO_REG173 0xAD +#define FCH_GPIO_REG174 0xAE +#define FCH_GPIO_REG175 0xAF +#define FCH_GPIO_REG176 0xB0 +#define FCH_GPIO_REG177 0xB1 +#define FCH_GPIO_REG178 0xB2 +#define FCH_GPIO_REG179 0xB3 +#define FCH_GPIO_REG180 0xB4 +#define FCH_GPIO_REG181 0xB5 +#define FCH_GPIO_REG182 0xB6 +#define FCH_GPIO_REG183 0xB7 +#define FCH_GPIO_REG184 0xB8 +#define FCH_GPIO_REG185 0xB9 +#define FCH_GPIO_REG186 0xBA +#define FCH_GPIO_REG187 0xBB +#define FCH_GPIO_REG188 0xBC +#define FCH_GPIO_REG189 0xBD +#define FCH_GPIO_REG190 0xBE +#define FCH_GPIO_REG191 0xBF +#define FCH_GPIO_REG192 0xC0 +#define FCH_GPIO_REG193 0xC1 +#define FCH_GPIO_REG194 0xC2 +#define FCH_GPIO_REG195 0xC3 +#define FCH_GPIO_REG196 0xC4 +#define FCH_GPIO_REG197 0xC5 +#define FCH_GPIO_REG198 0xC6 +#define FCH_GPIO_REG199 0xC7 +#define FCH_GPIO_REG200 0xC8 +#define FCH_GPIO_REG201 0xC9 +#define FCH_GPIO_REG202 0xCA +#define FCH_GPIO_REG203 0xCB +#define FCH_GPIO_REG204 0xCC +#define FCH_GPIO_REG205 0xCD +#define FCH_GPIO_REG206 0xCE +#define FCH_GPIO_REG207 0xCF +#define FCH_GPIO_REG208 0xD0 +#define FCH_GPIO_REG209 0xD1 +#define FCH_GPIO_REG210 0xD2 +#define FCH_GPIO_REG211 0xD3 +#define FCH_GPIO_REG212 0xD4 +#define FCH_GPIO_REG213 0xD5 +#define FCH_GPIO_REG214 0xD6 +#define FCH_GPIO_REG215 0xD7 +#define FCH_GPIO_REG216 0xD8 +#define FCH_GPIO_REG217 0xD9 +#define FCH_GPIO_REG218 0xDA +#define FCH_GPIO_REG219 0xDB +#define FCH_GPIO_REG220 0xDC +#define FCH_GPIO_REG221 0xDD +#define FCH_GPIO_REG222 0xDE +#define FCH_GPIO_REG223 0xDF +#define FCH_GPIO_REG224 0xF0 +#define FCH_GPIO_REG225 0xF1 +#define FCH_GPIO_REG226 0xF2 +#define FCH_GPIO_REG227 0xF3 +#define FCH_GPIO_REG228 0xF4 + +// +// FCH MMIO Base (GPIO BANK0) +// offset : 0x1500 +// +#define FCH_GPIO_PULL_UP_ENABLE BIT4 +#define FCH_GPIO_PULL_DOWN_ENABLE BIT5 +#define FCH_GPIO_OUTPUT_VALUE BIT6 +#define FCH_GPIO_OUTPUT_ENABLE (1 << 7) + +#define FCH_GPIO_068_AZ_SDIN0_GPIO26 0x68 +#define FCH_GPIO_06C_AZ_SDIN1_GPIO27 0x6C +#define FCH_GPIO_070_AZ_SDIN2_GPIO28 0x70 +#define FCH_GPIO_074_AZ_SDIN3_GPIO29 0x74 + +#define FCH_GPIO_10C_GPIO55_AGPI067 0x10C +#define FCH_GPIO_118_GPIO59_AGPI070 0x118 + +// +// FCH MMIO Base (IoMux) +// offset : 0xD00 +// +#define FCH_IOMUX_1A_AZ_SDIN0_EGPIO26 0x1A +#define FCH_IOMUX_1B_AZ_SDIN1_EGPIO27 0x1B +#define FCH_IOMUX_1C_AZ_SDIN2_EGPIO28 0x1C +#define FCH_IOMUX_1D_AZ_SDIN3_EGPIO29 0x1D + +// +// FCH MMIO Base (SMBUS) +// offset : 0xA00 +// +#define FCH_SMBUS_REG12 0x12 // I2CbusConfig + +// +// FCH MMIO Base (MISC) +// offset : 0xE00 +// +#define FCH_MISC_REG00 0x00 // ClkCntrl0 +/* +FCH_MISC_REG00 EQU 000h + ClkCntrl0 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG04 0x04 // ClkCntrl1 +/* +FCH_MISC_REG04 EQU 004h + ClkCntrl1 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG08 0x08 // ClkCntrl2 +/* +FCH_MISC_REG08 EQU 008h + ClkCntrl2 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG0C 0x0C // ClkCntrl3 +/* +FCH_MISC_REG0C EQU 00Ch + ClkCntrl3 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG10 0x10 // ClkCntrl4 +/* +FCH_MISC_REG10 EQU 010h + ClkCntrl4 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG14 0x14 // ClkCntrl5 +/* +FCH_MISC_REG14 EQU 014h + ClkCntrl5 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG18 0x18 // ClkCntrl6 +/* +FCH_MISC_REG18 EQU 018h + ClkCntrl6 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG1C 0x1C +#define FCH_MISC_REG30 0x30 // OscFreqCounter +/* +FCH_MISC_REG30 EQU 030h + OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second. +*/ +#define FCH_MISC_REG34 0x34 // HpetClkPeriod +/* +FCH_MISC_REG34 EQU 034h + HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M). +*/ +#define FCH_MISC_REG28 0x28 // ClkDrvSth2 +#define FCH_MISC_REG2C 0x2C +#define FCH_MISC_REG40 0x40 // MiscCntrl for clock only +#define FCH_MISC_REG41 0x41 // MiscCntr2 +#define FCH_MISC_REG42 0x42 // MiscCntr3 +#define FCH_MISC_REG44 0x44 // ValueOnPort80 +#define FCH_MISC_REG50 0x50 // +#define FCH_MISCx50_JTAG_CONTROL_ECO 0xFED80E50ul // +#define FCH_MISCx68_MEMORY_POWER_SAVING_CONTROL 0xFED80E68ul // + +#define FCH_MISC_REG6C 0x6C // EcoBit2 +/* +FCH_MISC_REG40 EQU 040h +*/ + +#define FCH_MISC_REG80 0x80 /**< FCH_MISC_REG80 + * @par + * StrapStatus [15.0] - FCH chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + */ +#define FCH_MISC_REGB6 0xB6 // + +#define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad +#define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1) + // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type. +#define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC) +#define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function +#define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock ** + +#define FCH_MISC_REG84 0x84 // StrapOverride +/* +FCH_MISC_REG84 EQU 084h + Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin. + Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin. + Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin. + Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin. + Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin. + Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin. + Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin. + Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin. + Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin. + Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin. + Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin + PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin + BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin + ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin. + BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin. + StrapOverrideEn EQU BIT31 ; Enable override strapping feature. +*/ +#define FCH_MISC_REGC0 0xC0 // CPU_Pstate0 +/* +FCH_MISC_REGC0 EQU 0C0h + Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core1_PState EQU BIT4+BIT5+BIT6 + Core2_PState EQU BIT8+BIT9+BIT10 + Core3_PState EQU BIT12+BIT13+BIT14 + Core4_PState EQU BIT16++BIT17+BIT18 + Core5_PState EQU BIT20+BIT21+BIT22 + Core6_PState EQU BIT24+BIT25+BIT26 + Core7_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGC4 0xC4 // CPU_Pstate1 +/* +FCH_MISC_REGC4 EQU 0C4h + Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core9_PState EQU BIT4+BIT5+BIT6 + Core10_PState EQU BIT8+BIT9+BIT10 + Core11_PState EQU BIT12+BIT13+BIT14 + Core12_PState EQU BIT16++BIT17+BIT18 + Core13_PState EQU BIT20+BIT21+BIT22 + Core14_PState EQU BIT24+BIT25+BIT26 + Core15_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD0 0xD0 // CPU_Cstate0 +/* +FCH_MISC_REGD0 EQU 0D0h + Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core1_CState EQU BIT4+BIT5+BIT6 + Core2_CState EQU BIT8+BIT9+BIT10 + Core3_CState EQU BIT12+BIT13+BIT14 + Core4_CState EQU BIT16++BIT17+BIT18 + Core5_CState EQU BIT20+BIT21+BIT22 + Core6_CState EQU BIT24+BIT25+BIT26 + Core7_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD4 0xD4 // CPU_Cstate1 +/* +FCH_MISC_REGD4 EQU 0D4h + Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core9_CState EQU BIT4+BIT5+BIT6 + Core10_CState EQU BIT8+BIT9+BIT10 + Core11_CState EQU BIT12+BIT13+BIT14 + Core12_CState EQU BIT16++BIT17+BIT18 + Core13_CState EQU BIT20+BIT21+BIT22 + Core14_CState EQU BIT24+BIT25+BIT26 + Core15_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGF0 0xF0 // SataPortSts +/* +FCH_MISC_REGF0 EQU 0F0h + Port0Sts EQU BIT0 ; The selected status of Port 0. + Port1Sts EQU BIT1 ; The selected status of Port 1 + Port2Sts EQU BIT2 ; The selected status of Port 2. + Port3Sts EQU BIT3 ; The selected status of Port 3 + Port4Sts EQU BIT4 ; The selected status of Port 4. + Port5Sts EQU BIT5 ; The selected status of Port 5 + SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5 + ; 01 - Select "delete" for Port 0 to 5 + ; 10 - Select "err" for Port 0 to 5 + ; 11 - Select "led" for Port 0 to 5 +*/ + +// +// FCH MMIO Base (SERIAL_DEBUG_BASE) +// offset : 0x1000 +// +#define FCH_SDB_REG00 0x00 // +#define FCH_SDB_REG74 0x74 + +#define FCH_RTC_REG00 0x00 // Seconds - RW +#define FCH_RTC_REG01 0x01 // Seconds Alarm - RW +#define FCH_RTC_REG02 0x02 // Minutes - RW +#define FCH_RTC_REG03 0x03 // Minutes Alarm - RW +#define FCH_RTC_REG04 0x04 // ours - RW +#define FCH_RTC_REG05 0x05 // ours Alarm- RW +#define FCH_RTC_REG06 0x06 // Day of Week - RW +#define FCH_RTC_REG07 0x07 // Date of Mont - RW +#define FCH_RTC_REG08 0x08 // Mont - RW +#define FCH_RTC_REG09 0x09 // Year - RW +#define FCH_RTC_REG0A 0x0A // Register A - RW +#define FCH_RTC_REG0B 0x0B // Register B - RW +#define FCH_RTC_REG0C 0x0C // Register C - R +#define FCH_RTC_REG0D 0x0D // DateAlarm - RW +#define FCH_RTC_REG32 0x32 // AltCentury - RW +#define FCH_RTC_REG48 0x48 // Century - RW +#define FCH_RTC_REG50 0x50 // Extended RAM Address Port - RW +#define FCH_RTC_REG53 0x53 // Extended RAM Data Port - RW +#define FCH_RTC_REG7E 0x7E // RTC Time Clear - RW +#define FCH_RTC_REG7F 0x7F // RTC RAM Enable - RW + +#define FCH_ECMOS_REG00 0x00 // scratch - reg +//;BIT0=0 AsicDebug is enabled +//;BIT1=0 SLT S3 runs +#define FCH_ECMOS_REG01 0x01 +#define FCH_ECMOS_REG02 0x02 +#define FCH_ECMOS_REG03 0x03 +#define FCH_ECMOS_REG04 0x04 +#define FCH_ECMOS_REG05 0x05 +#define FCH_ECMOS_REG06 0x06 +#define FCH_ECMOS_REG07 0x07 +#define FCH_ECMOS_REG08 0x08 // save 32BIT Physical address of Config structure +#define FCH_ECMOS_REG09 0x09 +#define FCH_ECMOS_REG0A 0x0A +#define FCH_ECMOS_REG0B 0x0B + +#define FCH_ECMOS_REG0C 0x0C //;save MODULE_ID +#define FCH_ECMOS_REG0D 0x0D //;Reserve for NB + +// +// FCH AOAC Base (FCH_AOAC_BASE) +// offset : 0x1E00 +// +#define FCH_AOACx94S013_CONTROL 0xFED81E94ul // +#define FCH_AOACx94S013_CONTROL_ARBITER_DIS (1 << 14) +#define FCH_AOACx94S013_CONTROL_INTERRUPT_DIS (1 << 15) + +#define FCH_IOMAP_REG00 0x000 // Dma_C 0 +#define FCH_IOMAP_REG02 0x002 // Dma_C 1 +#define FCH_IOMAP_REG04 0x004 // Dma_C 2 +#define FCH_IOMAP_REG06 0x006 // Dma_C 3 +#define FCH_IOMAP_REG08 0x008 // Dma_Status +#define FCH_IOMAP_REG09 0x009 // Dma_WriteRest +#define FCH_IOMAP_REG0A 0x00A // Dma_WriteMask +#define FCH_IOMAP_REG0B 0x00B // Dma_WriteMode +#define FCH_IOMAP_REG0C 0x00C // Dma_Clear +#define FCH_IOMAP_REG0D 0x00D // Dma_MasterClr +#define FCH_IOMAP_REG0E 0x00E // Dma_ClrMask +#define FCH_IOMAP_REG0F 0x00F // Dma_AllMask +#define FCH_IOMAP_REG20 0x020 // IntrCntrlReg1 +#define FCH_IOMAP_REG21 0x021 // IntrCntrlReg2 +#define FCH_IOMAP_REG40 0x040 // TimerC0 +#define FCH_IOMAP_REG41 0x041 // TimerC1 +#define FCH_IOMAP_REG42 0x042 // TimerC2 +#define FCH_IOMAP_REG43 0x043 // Tmr1CntrlWord +#define FCH_IOMAP_REG61 0x061 // Nmi_Status +#define FCH_IOMAP_REG70 0x070 // Nmi_Enable +#define FCH_IOMAP_REG71 0x071 // RtcDataPort +#define FCH_IOMAP_REG72 0x072 // AlternatRtcAddrPort +#define FCH_IOMAP_REG73 0x073 // AlternatRtcDataPort +#define FCH_IOMAP_REG80 0x080 // Dma_Page_Reserved0 +#define FCH_IOMAP_REG81 0x081 // Dma_PageC2 +#define FCH_IOMAP_REG82 0x082 // Dma_PageC3 +#define FCH_IOMAP_REG83 0x083 // Dma_PageC1 +#define FCH_IOMAP_REG84 0x084 // Dma_Page_Reserved1 +#define FCH_IOMAP_REG85 0x085 // Dma_Page_Reserved2 +#define FCH_IOMAP_REG86 0x086 // Dma_Page_Reserved3 +#define FCH_IOMAP_REG87 0x087 // Dma_PageC0 +#define FCH_IOMAP_REG88 0x088 // Dma_Page_Reserved4 +#define FCH_IOMAP_REG89 0x089 // Dma_PageC6 +#define FCH_IOMAP_REG8A 0x08A // Dma_PageC7 +#define FCH_IOMAP_REG8B 0x08B // Dma_PageC5 +#define FCH_IOMAP_REG8C 0x08C // Dma_Page_Reserved5 +#define FCH_IOMAP_REG8D 0x08D // Dma_Page_Reserved6 +#define FCH_IOMAP_REG8E 0x08E // Dma_Page_Reserved7 +#define FCH_IOMAP_REG8F 0x08F // Dma_Refres +#define FCH_IOMAP_REG92 0x092 // FastInit +#define FCH_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1 +#define FCH_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2 +#define FCH_IOMAP_REGC0 0x0C0 // Dma2_C4Addr +#define FCH_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt +#define FCH_IOMAP_REGC4 0x0C4 // Dma2_C5Addr +#define FCH_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt +#define FCH_IOMAP_REGC8 0x0C8 // Dma2_C6Addr +#define FCH_IOMAP_REGCA 0x0CA // Dma2_C6Cnt +#define FCH_IOMAP_REGCC 0x0CC // Dma2_C7Addr +#define FCH_IOMAP_REGCE 0x0CE // Dma2_C7Cnt +#define FCH_IOMAP_REGD0 0x0D0 // Dma_Status +#define FCH_IOMAP_REGD2 0x0D2 // Dma_WriteRest +#define FCH_IOMAP_REGD4 0x0D4 // Dma_WriteMask +#define FCH_IOMAP_REGD6 0x0D6 // Dma_WriteMode +#define FCH_IOMAP_REGD8 0x0D8 // Dma_Clear +#define FCH_IOMAP_REGDA 0x0DA // Dma_Clear +#define FCH_IOMAP_REGDC 0x0DC // Dma_ClrMask +#define FCH_IOMAP_REGDE 0x0DE // Dma_ClrMask +#define FCH_IOMAP_REGF0 0x0F0 // NCP_Error +#define FCH_IOMAP_REG40B 0x040B // DMA1_Extend +#define FCH_IOMAP_REG4D0 0x04D0 // IntrEdgeControl +#define FCH_IOMAP_REG4D6 0x04D6 // DMA2_Extend +#define FCH_IOMAP_REGC00 0x0C00 // Pci_Intr_Index +#define FCH_IOMAP_REGC01 0x0C01 // Pci_Intr_Data +#define FCH_IOMAP_REGC14 0x0C14 // Pci_Error +#define FCH_IOMAP_REGC50 0x0C50 // CMIndex +#define FCH_IOMAP_REGC51 0x0C51 // CMData +#define FCH_IOMAP_REGC52 0x0C52 // GpmPort +#define FCH_IOMAP_REGC6F 0x0C6F // Isa_Misc +#define FCH_IOMAP_REGCD0 0x0CD0 // PMio2_Index +#define FCH_IOMAP_REGCD1 0x0CD1 // PMio2_Data +#define FCH_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index +#define FCH_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data +#define FCH_IOMAP_REGCD6 0x0CD6 // PM_Index +#define FCH_IOMAP_REGCD7 0x0CD7 // PM_Data +#define FCH_IOMAP_REGCF9 0x0CF9 // CF9Rst reg + +#define FCH_IRQ_INTA 0x00 // INTA# +#define FCH_IRQ_INTB 0x01 // INTB# +#define FCH_IRQ_INTC 0x02 // INTC# +#define FCH_IRQ_INTD 0x03 // INTD# +#define FCH_IRQ_INTE 0x04 // INTE# +#define FCH_IRQ_INTF 0x05 // INTF# +#define FCH_IRQ_INTG 0x06 // INTG# +#define FCH_IRQ_INTH 0x07 // INTH# +#define FCH_IRQ_SCI 0x10 // SCI +#define FCH_IRQ_SMBUS0 0x11 // SMBUS0 +#define FCH_IRQ_ASF 0x12 // ASF +#define FCH_IRQ_HDAUDIO 0x13 // HD Audio +#define FCH_IRQ_FC 0x14 // FC +#define FCH_IRQ_GEC 0x15 // GEC +#define FCH_IRQ_SD 0x17 // SD +#define FCH_IRQ_IMCINT0 0x20 // IMC INT0 +#define FCH_IRQ_IMCINT1 0x21 // IMC INT1 +#define FCH_IRQ_IMCINT2 0x22 // IMC INT2 +#define FCH_IRQ_IMCINT3 0x23 // IMC INT3 +#define FCH_IRQ_IMCINT4 0x24 // IMC INT4 +#define FCH_IRQ_IMCINT5 0x25 // IMC INT5 +#define FCH_IRQ_USB18INTA 0x30 // Dev 18 (USB) INTA# +#define FCH_IRQ_USB18INTB 0x31 // Dev 18 (USB) INTB# +#define FCH_IRQ_USB19INTA 0x32 // Dev 19 (USB) INTA# +#define FCH_IRQ_USB19INTB 0x33 // Dev 19 (USB) INTB# +#define FCH_IRQ_USB22INTA 0x34 // Dev 22 (USB) INTA# +#define FCH_IRQ_USB22INTB 0x35 // Dev 22 (USB) INTB# +#define FCH_IRQ_USB20INTC 0x36 // Dev 20 (USB) INTC# +#define FCH_IRQ_IDE 0x40 // IDE pci interrupt +#define FCH_IRQ_SATA 0x41 // SATA pci interrupt +#define FCH_IRQ_GPPINT0 0x50 // Gpp Int0 +#define FCH_IRQ_GPPINT1 0x51 // Gpp Int1 +#define FCH_IRQ_GPPINT2 0x52 // Gpp Int2 +#define FCH_IRQ_GPPINT3 0x53 // Gpp Int3 +#define FCH_IRQ_GPIO 0x62 // GPIO Controller +#define FCH_IRQ_IOAPIC 0x80 // Select IRQ routing to IoApic mode +#define FCH_IRQ_PIC 0x00 // Select IRQ routing to PIC mode + +#define FCH_SPI_MMIO_REG00 0x00 //SPI_ +#define FCH_SPI_OPCODE 0x000000FFl // +#define FCH_SPI_TX_COUNT 0x00000F00l // +#define FCH_SPI_RX_COUNT 0x0000F000l // +#define FCH_SPI_EXEC_OPCODE 0x00010000l // +#define FCH_SPI_FIFO_PTR_CRL 0x00100000l // +#define FCH_SPI_FIFO_PTR_INC 0x00200000l // +#define FCH_SPI_BUSY 0x80000000l // +#define FCH_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register +#define FCH_SPI_PARAMETER 0x000000FFl // +#define FCH_SPI_FIFO_PTR 0x00000700l // +#define FCH_SPI_BYTE_PROGRAM 0xFF000000l // +#define FCH_SPI_MMIO_REG1C 0x1C // +#define FCH_SPI_RETRY_TIMES 0x3 // + +#define FCH_SPI_MMIO_REG1D 0x1D // +#define FCH_SPI_MMIO_REG1E 0x1E // +#define FCH_SPI_MMIO_REG1F 0x1F // +#define FCH_SPI_MMIO_REG4E 0x4E // + +#define FCH_SPI_MMIO_REG1F_X05_TX_BYTE_COUNT 0x05 // +#define FCH_SPI_MMIO_REG1F_X06_RX_BYTE_COUNT 0x06 // + +#define FCH_SPI_MMIO_REG20 0x20 // +#define FCH_SPI_MMIO_REG22 0x22 // +#define FCH_SPI_MMIO_REG38 0x38 // +#define FCH_SPI_MMIO_REG3C 0x3C // + +#define FCH_SPI_MMIO_REG45_CMDCODE 0x45 // +#define FCH_SPI_MMIO_REG47_CMDTRIGGER 0x47 // +#define FCH_SPI_MMIO_REG48_TXBYTECOUNT 0x48 // +#define FCH_SPI_MMIO_REG4B_RXBYTECOUNT 0x4B // +#define FCH_SPI_MMIO_REG4C_SPISTATUS 0x4C // +#define FCH_SPI_MMIO_REG80_FIFO 0x80 // + +#define FCH_SPI_MODE_FAST 0x7 // +#define FCH_SPI_MODE_NORMAL 0x6 // +#define FCH_SPI_MODE_QUAL_144 0x5 // +#define FCH_SPI_MODE_QUAL_122 0x4 // +#define FCH_SPI_MODE_QUAL_114 0x3 // +#define FCH_SPI_MODE_QUAL_112 0x2 // + +#define FCH_SPI_DEVICE_MODE_DIS 0x7 // +#define FCH_SPI_DEVICE_MODE_144 0x4 // +#define FCH_SPI_DEVICE_MODE_114 0x3 // +#define FCH_SPI_DEVICE_MODE_122 0x2 // +#define FCH_SPI_DEVICE_MODE_112 0x1 // +#define FCH_SPI_DEVICE_MODE_FAST 0x0 // + +#define FCH_SPI_SPEED_16M 0x4 // +#define FCH_SPI_SPEED_22M 0x3 // +#define FCH_SPI_SPEED_33M 0x2 // +#define FCH_SPI_SPEED_66M 0x1 // +#define FCH_SPI_SPEED_100M 0x5 // + +#define AMD_NB_REG78 0x78 +#define AMD_NB_SCRATCH AMD_NB_REG78 +#define MailBoxPort 0x3E + +#define MAX_LT_POLLINGS 0x4000 +#define SMI_TIMER_ENABLE BIT15 + + +#define ACPIMMIO32(x) (*(volatile UINT32*)(UINTN)(x)) +#define ACPIMMIO16(x) (*(volatile UINT16*)(UINTN)(x)) +#define ACPIMMIO8(x) (*(volatile UINT8*)(UINTN)(x)) + +#define U3PLL_LOCK BIT7 +#define U3PLL_RESET BIT8 +#define U3PHY_RESET BIT9 +#define U3CORE_RESET BIT10 +#define XHC0_FUNC_RESET BIT11 +#define XHC1_FUNC_RESET BIT12 + +#define XHCI_ACPI_MMIO_AMD_REG00 0x00 +#define XHCI_ACPI_MMIO_AMD_REG04 0x04 +#define XHCI_ACPI_MMIO_AMD_REG08 0x08 +#define XHCI_ACPI_MMIO_AMD_REG10 0x10 +#define XHCI_ACPI_MMIO_AMD_REG14 0x14 +#define XHCI_ACPI_MMIO_AMD_REG20 0x20 +#define XHCI_ACPI_MMIO_AMD_REG24 0x24 +#define XHCI_ACPI_MMIO_AMD_REG28 0x28 +#define XHCI_ACPI_MMIO_AMD_REG30 0x30 +#define XHCI_ACPI_MMIO_AMD_REG40 0x40 +#define XHCI_ACPI_MMIO_AMD_REG48 0x48 // USB3.0_Ind_REG Index +#define XHCI_ACPI_MMIO_AMD_REG4C 0x4C // USB2.0_Ind_REG Data +#define XHCI_ACPI_MMIO_AMD_REG8C 0x8C +#define XHCI_ACPI_MMIO_AMD_REG90 0x90 // adaptation timer settings +#define XHCI_ACPI_MMIO_AMD_REG98 0x98 +#define XHCI_ACPI_MMIO_AMD_REGA0 0xA0 // BAR 0 +#define XHCI_ACPI_MMIO_AMD_REGA4 0xA4 // BAR 1 +#define XHCI_ACPI_MMIO_AMD_REGA8 0xA8 // BAR 2 +#define XHCI_ACPI_MMIO_AMD_REGB0 0xB0 // SPI_Valid_Base. +#define XHCI_ACPI_MMIO_AMD_REGC0 0xC0 // Firmware starting offset for coping +#define XHCI_ACPI_MMIO_AMD_REGB4 0xB4 +#define XHCI_ACPI_MMIO_AMD_REGD0 0xD0 + +#define FCH_XHCI_REG48 0x48 // XHCI IND_REG Index registers +#define FCH_XHCI_REG4C 0x4C // XHCI IND_REG Data registers + +#define FCH_XHCI_IND60_BASE 0x40000000ul // + +#define FCH_XHCI_IND60_REG00 FCH_XHCI_IND60_BASE + 0x00 // +#define FCH_XHCI_IND60_REG04 FCH_XHCI_IND60_BASE + 0x04 // +#define FCH_XHCI_IND60_REG08 FCH_XHCI_IND60_BASE + 0x08 // +#define FCH_XHCI_IND60_REG0C FCH_XHCI_IND60_BASE + 0x0C // +#define FCH_XHCI_IND60_REG18 FCH_XHCI_IND60_BASE + 0x18 // +#define FCH_XHCI_IND60_REG48 FCH_XHCI_IND60_BASE + 0x48 // +#define FCH_XHCI_IND60_REG50 FCH_XHCI_IND60_BASE + 0x50 // +#define FCH_XHCI_IND60_REG54 FCH_XHCI_IND60_BASE + 0x54 // + +#define FCH_XHCI_IND_REG00 0x00 // +#define FCH_XHCI_IND_REG04 0x04 // +#define FCH_XHCI_IND_REG48 0x48 // +#define FCH_XHCI_IND_REG54 0x54 // +#define FCH_XHCI_IND_REG88 0x88 // +#define FCH_XHCI_IND_REG94 0x94 // adaptation mode settings +#define FCH_XHCI_IND_REG98 0x98 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REGC8 0xC8 // +#define FCH_XHCI_IND_REGD4 0xD4 // adaptation mode settings +#define FCH_XHCI_IND_REGD8 0xD8 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REG100 0x100 // +#define FCH_XHCI_IND_REG120 0x120 // +#define FCH_XHCI_IND_REG128 0x128 // +#define MAX_XHCI_PORTS 0x04 + +//SMBUS +#define FCH_SMB_IOREG00 0x00 // SMBusStatus +#define FCH_SMB_IOREG01 0x01 // SMBusSlaveStatus +#define FCH_SMB_IOREG02 0x02 // SMBusControl +#define FCH_SMB_IOREG03 0x03 // SMBusHostCmd +#define FCH_SMB_IOREG04 0x04 // SMBusAddress +#define FCH_SMB_IOREG05 0x05 // SMBusData0 +#define FCH_SMB_IOREG06 0x06 // SMBusData1 +#define FCH_SMB_IOREG07 0x07 // SMBusBlockData +#define FCH_SMB_IOREG08 0x08 // SMBusSlaveControl +#define FCH_SMB_IOREG14 0x14 // SMBusAutoPoll +#define FCH_SMB_IOREG16 0x16 // SMBusPausePoll +#define FCH_SMB_IOREG17 0x17 // SMBusHostCmd2 + +#define FCH_SMB_CMD_QUICK 0x00 << 2 // Quick Read or Write +#define FCH_SMB_CMD_BYTE 0x01 << 2 // Byte Read or Write +#define FCH_SMB_CMD_BYTE_DATA 0x02 << 2 // Byte Data Read or Write +#define FCH_SMB_CMD_WORD_DATA 0x03 << 2 // Word Data Read or Write +#define FCH_SMB_CMD_BLOCK 0x05 << 2 // Block Read or Write + +#define FCH_SMB_ALL_HOST_STATUS 0x1f // HostBusy+SMBInterrupt+DeviceErr+BusCollision+Failed +#define FCH_SMB_CMD_BYTE_DATA_START 0x48 // Byte Data Read or Write +#define FCH_SMB_CMD_START BIT6 +#define FCH_SMB_READ_ENABLE BIT0 +#define FCH_SMB_AUTO_POLL_EN BIT0 +#define FCH_SMB_POLL2BYTE BIT7 + +#define SBTSI_ADDR 0x98 +#define SBTSI_REG01 0x01 +#define SBTSI_REG09 0x09 +#define SBTSI_REG10 0x10 +#define SBTSI_READORDER BIT5 + +#define FCH_EC_ENTER_CONFIG 0X5A +#define FCH_EC_EXIT_CONFIG 0XA5 +#define FCH_EC_REG07 0X07 +#define FCH_EC_REG30 0X30 +#define FCH_EC_REG60 0X60 +#define FCH_EC_REG61 0X61 + +#define FCH_IMC_ROMSIG 0x55aa55aaul + +#define SPI_HEAD_LENGTH 0x0E +#define SPI_BAR0_VLD 0x01 +#define SPI_BASE0 (0x00 << 7) +#define SPI_BAR1_VLD (0x01 << 8) +#define SPI_BASE1 (SPI_HEAD_LENGTH << 10) +#define SPI_BAR2_VLD (0x01 << 16) +#define SPI_BASE2(x) ((SPI_HEAD_LENGTH + ACPIMMIO16(x)) << 18) + +#define FW_TO_SIGADDR_OFFSET 0x0C +#define BCD_ADDR_OFFSET 0x02 +#define BCD_SIZE_OFFSET 0x04 +#define FW_ADDR_OFFSET 0x06 +#define FW_SIZE_OFFSET 0x08 +#define ACD_ADDR_OFFSET 0x0A +#define ACD_SIZE_OFFSET 0x0C +#define XHC_BOOT_RAM_SIZE 0x8000 + +#define PKT_DATA_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x00 +#define PKT_LEN_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x14 +#define PKT_CTRL_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x15 +#define EFUS_DAC_ADJUSTMENT_CONTROL 0x850A8ul +#define BGADJ 0x1F +#define DACADJ 0x1B +#define EFUS_DAC_ADJUSTMENT_CONTROL_DATA (BGADJ + (DACADJ << 8) + BIT16 ) + +#define KABINI_OSC_OUT_CLOCK_SEL_48MHz 0x02 +#define KABINI_OSC_OUT_CLOCK_SEL_25MHz 0x01 + +#define RTC_WORKAROUND_SECOND 0x00 +#define RTC_VALID_SECOND_VALUE 0x59 +#define RTC_SECOND_RESET_VALUE 0x30 +#define RTC_SECOND_LOWER_NIBBLE 0x0F +#define RTC_VALID_SECOND_VALUE_LN 0x09 + +#ifndef FCH_DEADLOOP + #define FCH_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif + +#define OHCI_ARB_REGQ_VLD_EN BIT2 + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/Fch/FchPlatform.h b/src/vendorcode/amd/pi/00630F01/Proc/Fch/FchPlatform.h new file mode 100644 index 0000000000..3306fd5a52 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/Fch/FchPlatform.h @@ -0,0 +1,118 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH platform definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + * + */ +/* +***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +**************************************************************************** +*/ +#ifndef _FCH_PLATFORM_H_ +#define _FCH_PLATFORM_H_ + +#define MAX_SATA_PORTS 8 + +#include "AGESA.h" + +#ifndef FCHOEM_ACPI_RESTORE_SWSMI + #define FCHOEM_BEFORE_PCI_RESTORE_SWSMI 0xD3 + #define FCHOEM_AFTER_PCI_RESTORE_SWSMI 0xD4 + #define FCHOEM_ENABLE_ACPI_SWSMI 0xA0 + #define FCHOEM_DISABLE_ACPI_SWSMI 0xA1 + #define FCHOEM_START_TIMER_SMI 0xBC + #define FCHOEM_STOP_TIMER_SMI 0xBD +#endif + +#ifndef FCHOEM_SPI_UNLOCK_SWSMI + #define FCHOEM_SPI_UNLOCK_SWSMI 0xAA +#endif +#ifndef FCHOEM_SPI_LOCK_SWSMI + #define FCHOEM_SPI_LOCK_SWSMI 0xAB +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_LOW + #define FCHOEM_ACPI_TABLE_RANGE_LOW 0xE0000ul +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_HIGH + #define FCHOEM_ACPI_TABLE_RANGE_HIGH 0xFFFF0ul +#endif + +#ifndef FCHOEM_ACPI_BYTE_CHECHSUM + #define FCHOEM_ACPI_BYTE_CHECHSUM 0x100 +#endif + +#ifndef FCHOEM_IO_DELAY_PORT + #define FCHOEM_IO_DELAY_PORT 0x80 +#endif + +#ifndef FCHOEM_OUTPUT_DEBUG_PORT + #define FCHOEM_OUTPUT_DEBUG_PORT 0x80 +#endif + +#define FCH_PCIRST_BASE_IO 0xCF9 +#define FCH_PCI_RESET_COMMAND06 0x06 +#define FCH_PCI_RESET_COMMAND0E 0x0E +#define FCH_KBDRST_BASE_IO 0x64 +#define FCH_KBC_RESET_COMMAND 0xFE +#define FCH_ROMSIG_BASE_IO 0x20000l +#define FCH_ROMSIG_SIGNATURE 0x55AA55AAul +#define FCH_MAX_TIMER 0xFFFFFFFFul +#define FCH_GEC_INTERNAL_REG 0x6804 +#define FCH_HPET_REG_MASK 0xFFFFF800ul +#define FCH_FAKE_USB_BAR_ADDRESS 0x58830000ul + + +#ifndef FCHOEM_ELAPSED_TIME_UNIT + #define FCHOEM_ELAPSED_TIME_UNIT 28 +#endif + +#ifndef FCHOEM_ELAPSED_TIME_DIVIDER + #define FCHOEM_ELAPSED_TIME_DIVIDER 100 +#endif + +#include "Fch.h" +#include "amdlib.h" +#include "FchCommonCfg.h" +#include "AcpiLib.h" +#include "FchDef.h" +#include "FchBiosRamUsage.h" +#include "AmdFch.h" + +extern BUILD_OPT_CFG UserOptions; + +#endif // _FCH_PLATFORM_H_ diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDebugPrint.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDebugPrint.h new file mode 100644 index 0000000000..352e7090e5 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDebugPrint.h @@ -0,0 +1,80 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Print Routines + * + * Contains all functions related to IDS Debug Print + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _IDS_DEBUGPRINT_H_ +#define _IDS_DEBUGPRINT_H_ + +///Debug String End flag +#define DEBUG_STRING_END_FLAG (0x0) +/// return status for debug print +typedef enum { + IDS_DEBUG_PRINT_SUCCESS = 0, ///< success + IDS_DEBUG_PRINT_BUFFER_OVERFLOW, ///< Bufer overflow +} IDS_DEBUG_PRINT_STATUS; + +/// Private datas for debug print +typedef struct _IDS_DEBUG_PRINT_PRIVATE_DATA { + BOOLEAN saveContext; /// save context +} IDS_DEBUG_PRINT_PRIVATE_DATA; + +typedef BOOLEAN (*PF_IDS_DEBUG_PRINT_SUPPORT) (VOID); +typedef BOOLEAN (*PF_IDS_DEBUG_PRINT_FILTER) (UINT64 *Filter); +typedef VOID (*PF_IDS_DEBUG_PRINT_PRINT) (CHAR8 *Buffer, UINTN BufferSize, IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate); +typedef VOID (*PF_IDS_DEBUG_INIT_PRIVATE_DATA) (UINT64 flag, IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate); + +/// Debug print Hw layer service class +typedef struct _IDS_DEBUG_PRINT { + PF_IDS_DEBUG_PRINT_SUPPORT support; ///Check if support + PF_IDS_DEBUG_PRINT_FILTER customfilter; ///Get if any customize filters + PF_IDS_DEBUG_INIT_PRIVATE_DATA InitPrivateData; ///Init private data + PF_IDS_DEBUG_PRINT_PRINT print; ///Print data to Hw layer +} IDS_DEBUG_PRINT; + + +VOID +GetDebugPrintList ( + IN OUT CONST IDS_DEBUG_PRINT ***pIdsDebugPrintListPtr + ); + + +#endif //_IDS_DEBUGPRINT_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpHdtout.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpHdtout.h new file mode 100644 index 0000000000..982f513dd8 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpHdtout.h @@ -0,0 +1,119 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Debug_library Routines + * + * Contains all functions related to HDTOUT + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _IDS_HDTOUT_H_ +#define _IDS_HDTOUT_H_ + +#define HDTOUT_VERSION 0x0200 + +/// HDTOUT command +#define HDTOUT_COMMAND 0x99cc +#define HDTOUT_INIT (0x10BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_ASSERT (0xA0BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_EXIT (0xE0BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_PRINT (0xC0BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_TIME_ANALYSE (0xD0BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_BREAKPOINT (0xB0BF0000ul | HDTOUT_COMMAND) +#define HDTOUT_ERROR (0x1EBF0000ul | HDTOUT_COMMAND) + + +#define HDTOUT_ERROR_HEAP_ALLOCATION 0x1 +#define HDTOUT_ERROR_HEAP_AllOCATE_FAIL 0x2 + +#define HDTOUT_PRINTCTRL_OFF 0 +#define HDTOUT_PRINTCTRL_ON 1 +#define HDTOUT_ALL_CORES 0 +#define HDTOUT_BSP_ONLY 1 +#define HDTOUT_BUFFER_MODE_OFF 0 +#define HDTOUT_BUFFER_MODE_ON 1 + +#define HDTOUT_HEADER_SIGNATURE 0xDB1099CCul +#define HDTOUT_DEFAULT_BUFFER_SIZE 0x1000 +/// HDTOUT Header. +typedef struct _HDTOUT_HEADER { + UINT32 Signature; ///< 0xDB1099CC + UINT16 Version; ///< HDTOUT version. + UINT16 BufferSize; ///< Size in bytes. + UINT16 DataIndex; ///< Data Index. + UINT8 PrintCtrl; ///< 0 off no print 1 on print + UINT8 NumBreakpointUnit; ///< default 0 no bp unit others number of bp unit + UINT32 FuncListAddr; ///< 32 bit address to the list of functions that script can execute + UINT8 ConsoleType; ///< Console type - deprecated + UINT8 Event; ///< Event type. - deprecated + UINT8 OutBufferMode; ///< Off:stack mode, On: heap mode - deprecated + UINT32 EnableMask; ///< Bitmap to select which part should be streamed out + UINT64 ConsoleFilter; ///< Filter use to select which part should be streamed out + UINT8 BspOnlyFlag; ///< 1 Only Enable Bsp output, 0 enable On All cores + UINT8 Reserved[56 - 32]; ///< Reserved for header expansion + + CHAR8 BreakpointList[300]; ///< Breakpoint list + CHAR8 StatusStr[156]; ///< Shows current node, DCT, CS,... + CHAR8 Data[2]; ///< HDTOUT content. Its size will be determined by BufferSize. +} HDTOUT_HEADER; + +#define IDS_HDTOUT_BP_AND_OFF 0 +#define IDS_HDTOUT_BP_AND_ON 1 + +#define IDS_HDTOUT_BPFLAG_FORMAT_STR 0 +#define IDS_HDTOUT_BPFLAG_STATUS_STR 1 + +#define HDTOUT_BP_ACTION_HALT 1 +#define HDTOUT_BP_ACTION_PRINTON 2 +#define HDTOUT_BP_ACTION_PRINTONE 3 +#define HDTOUT_BP_ACTION_PRINTOFF 4 + +///breakpoint unit of HDTOUT +typedef struct _BREAKPOINT_UNIT { + UINT8 AndFlag : 1; ///< Next string is ANDed to current string + UINT8 BpFlag : 1; ///< Format string or Status string + UINT8 Action : 4; ///< Halt, start HDTOUT, or stop HDT,... + UINT8 BpStrOffset; ///< Offset from BreakpointList to the breakpoint string +} BREAKPOINT_UNIT; + + +BOOLEAN +AmdIdsHdtOutSupport ( + VOID + ); + +#endif //_IDS_HDTOUT_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpRam.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpRam.h new file mode 100644 index 0000000000..cec4527e54 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Debug/IdsDpRam.h @@ -0,0 +1,73 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Print Routines + * + * Contains all functions related to IDS Debug Print + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _IDS_DP_RAM_H_ +#define _IDS_DP_RAM_H_ + +#pragma pack (push, 1) + +///Debug Print RAM signature +#define DEBUG_PRINT_RAM_SIG MAKE_SIGNATURE ('D','P','R','M') + +/// Debug Print Ram Header +typedef struct _IDS_DEBUG_PRINT_RAM_HEADER { + SIGNATURE DpRamSig; /// 00 'D','P','R','M' + UINT32 LatestIdx; /// 04 Latest Index + UINT8 Reserved[8]; /// Reserved +} IDS_DEBUG_PRINT_RAM_HEADER; + +///Debug Print RAM Signature Offset +#define DEBUG_PRINT_RAM_SIG_ADDR ((UINTN) IDS_DPRAM_BASE + (UINTN) &(((IDS_DEBUG_PRINT_RAM_HEADER *) 0)->DpRamSig)) +///Debug Print RAM Latest Index Offset +#define DEBUG_PRINT_RAM_LATESTIDX_ADDR ((UINTN) IDS_DPRAM_BASE + (UINTN) &(((IDS_DEBUG_PRINT_RAM_HEADER *) 0)->LatestIdx)) + +///Print Buffer start +#define DEBUG_PRINT_BUFFER_START ((UINTN) IDS_DPRAM_BASE + sizeof (IDS_DEBUG_PRINT_RAM_HEADER)) +///Print Buffer Size +#define DEBUG_PRINT_BUFFER_SIZE ((UINT32) IDS_DPRAM_SIZE - sizeof (IDS_DEBUG_PRINT_RAM_HEADER)) +///Debug Print RAM default Value +#define DEBUG_PRINT_BUFFER_DFT_VALUE ((UINT8) 0xCC) + +#pragma pack (pop) + +#endif //_IDS_DP_RAM_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/IdsF15AllService.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/IdsF15AllService.h new file mode 100644 index 0000000000..8f0aa65031 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/IdsF15AllService.h @@ -0,0 +1,49 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA IDS Translation + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _IDS_F15_ALLSERVICE_H_ +#define _IDS_F15_ALLSERVICE_H_ +#ifdef __IDS_EXTENDED__ + #include IDS_EXT_INCLUDE_F15 (IdsIntF15AllService) +#endif + +#endif + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvAllService.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvAllService.h new file mode 100644 index 0000000000..1d7a68078e --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvAllService.h @@ -0,0 +1,49 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA IDS Translation + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + #ifndef _IDS_F15_KV_ALLSERVICE_H_ +#define _IDS_F15_KV_ALLSERVICE_H_ +#ifdef __IDS_EXTENDED__ + #include IDS_EXT_INCLUDE_F15_KV (IdsIntF15KvAllService) +#endif + +#endif //_IDS_F15_KV_ALLSERVICE_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvNvDef.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvNvDef.h new file mode 100644 index 0000000000..b10c1c34f6 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/KV/IdsF15KvNvDef.h @@ -0,0 +1,287 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * IDS NV definition for F15Kv + * + * Auto generated from CBS XML file + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS F15Kv + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _IDSF15KVNVDEF_H_ +#define _IDSF15KVNVDEF_H_ +///HTC Enable +///Enable or disable Hardware Thermal Control. D18F3x64[0] +typedef enum { + IdsNvThermalHTCEnDisabled = 0,///<Disabled + IdsNvThermalHTCEnEnabled = 1,///<Enabled + IdsNvThermalHTCEnAuto = 3,///<Auto +} IdsNvThermalHTCEn; + +///HTC Override +///Enable or disable Thermal Control Override +typedef enum { + IdsNvThermalHTCOverrideDisabled = 0,///<Disabled + IdsNvThermalHTCOverrideEnabled = 1,///<Enabled +} IdsNvThermalHTCOverride; + +///HTC P-state limit select +///Specifies the P-state limit of all cores when in the P-state based HTC-active state +#define IdsNvThermalHtcPstateLimitMin 0 +#define IdsNvThermalHtcPstateLimitMax 7 + +///HTC Temperature Hysteresis +///Sets the temperature hysteresis for HTC. D18F3x64[27:24] +#define IdsNvThermalHTCTempHysMin 0 +#define IdsNvThermalHTCTempHysMax 0xF + +///HTC Activation Temp +///Sets the HTC temperature limit. D18F3x64[22:16] +#define IdsNvThermalHTCActTempMin 0 +#define IdsNvThermalHTCActTempMax 0x7F + +///Bank Interleave +///Interleave memory blocks across the DRAM chip selects for node 0. +typedef enum { + IdsNvMemMappingBankInterleaveDisabled = 0,///<Disabled + IdsNvMemMappingBankInterleaveAuto = 1,///<Auto +} IdsNvMemMappingBankInterleave; + +///DRAM Channel Interleave +///Interleave between two DCTs when they are in unganged mode. +typedef enum { + IdsNvMemMappingChlInterleaveAddress_bit_6 = 0,///<Address bit 6 + IdsNvMemMappingChlInterleaveAddress_bit_12 = 1,///<Address bit 12 + IdsNvMemMappingChlInterleaveHash__exclusive_OR_of_address_bits_20_16__6_ = 2,///<Hash: exclusive OR of address bits[20:16, 6] + IdsNvMemMappingChlInterleaveHash__excluseive_OR_of_address_bits_20_16__9_ = 3,///<Hash: excluseive OR of address bits[20:16, 9] + IdsNvMemMappingChlInterleaveAddress_bit_8 = 4,///<Address bit 8 + IdsNvMemMappingChlInterleaveAddress_bit_9 = 5,///<Address bit 9 + IdsNvMemMappingChlInterleaveDisabled = 0xF,///<Disabled + IdsNvMemMappingChlInterleaveAuto = 0xFF,///<Auto +} IdsNvMemMappingChlInterleave; + +///ECC Symbol Size +///ECC symbol size and code selection. D18F3x180[25] +typedef enum { + IdsNvEccSymbolSizex4 = 0,///<x4 + IdsNvEccSymbolSizex8 = 1,///<x8 + IdsNvEccSymbolSizeAuto = 3,///<Auto +} IdsNvEccSymbolSize; + +///DRAM prefetches triggered from CPU requests +///Enable or disable DRAM prefetches Prefetch triggered by CPU requests. +typedef enum { + IdsNvPrefetchPrefCpuDis0 = 0,///<0 + IdsNvPrefetchPrefCpuDis1 = 1,///<1 + IdsNvPrefetchPrefCpuDisAuto = 3,///<Auto +} IdsNvPrefetchPrefCpuDis; + +///HW prefetch training on SW Prefetches +///Enable or disable Hardware Prefetch training on Software Prefetches +typedef enum { + IdsNvPrefetchDisHWPFforSWPF0 = 0,///<0 + IdsNvPrefetchDisHWPFforSWPF1 = 1,///<1 + IdsNvPrefetchDisHWPFforSWPFAuto = 3,///<Auto +} IdsNvPrefetchDisHWPFforSWPF; + +///Hardware Prefetches +///Enable or disable Hardware Prefetches. +typedef enum { + IdsNvPrefetchDisHWPF0 = 0,///<0 + IdsNvPrefetchDisHWPF1 = 1,///<1 + IdsNvPrefetchDisHWPFAuto = 3,///<Auto +} IdsNvPrefetchDisHWPF; + +///UMI Gen2 +///Enable or disable UMI link Gen2 +typedef enum { + IdsNvFchGppUmiGen2Disabled = 0,///<Disabled + IdsNvFchGppUmiGen2Enabled = 1,///<Enabled +} IdsNvFchGppUmiGen2; + +///SATA Controller +///Disable or enable OnChip SATA controller +typedef enum { + IdsNvFchSataEnableDisabled = 0,///<Disabled + IdsNvFchSataEnableEnabled = 1,///<Enabled +} IdsNvFchSataEnable; + +///SATA Mode +///Select OnChip SATA Type +typedef enum { + IdsNvFchSataClassNative_IDE = 0,///<Native IDE + IdsNvFchSataClassRAID = 1,///<RAID + IdsNvFchSataClassAHCI = 3,///<AHCI + IdsNvFchSataClassLegacy_IDE = 3,///<Legacy IDE + IdsNvFchSataClassIDE__AHCI = 4,///<IDE->AHCI + IdsNvFchSataClassAHCI_as_ID_0x7804 = 5,///<AHCI as ID 0x7804 + IdsNvFchSataClassIDE__AHCI_as_ID_0x7804 = 6,///<IDE->AHCI as ID 0x7804 +} IdsNvFchSataClass; + +///OnChip IDE +///Select OnChip IDE controller mode +typedef enum { + IdsNvFchSataIdeModeLegacy_IDE = 0,///<Legacy IDE + IdsNvFchSataIdeModeNative_IDE = 1,///<Native IDE +} IdsNvFchSataIdeMode; + +///IDE Controller +///Disable or enable OnChip IDE controller +typedef enum { + IdsNvFchSataIdeEnableDisabled = 0,///<Disabled + IdsNvFchSataIdeEnableEnabled = 1,///<Enabled +} IdsNvFchSataIdeEnable; + +///XHC Switch (Bus 0 Dev 16 Fn 0/1) +///Select disable or enable XHCI HCs (Bus 0 Dev 16 Fn 0/1) +typedef enum { + IdsNvFchUsbXhciSwitchDisabled = 0,///<Disabled + IdsNvFchUsbXhciSwitchEnabled = 1,///<Enabled +} IdsNvFchUsbXhciSwitch; + +///USB1(Bus 0 Dev 18 Fn 0/2) +///Select disable or enable USB1 HCs (Bus 0 Dev 18 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci1EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci1EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci1Enable; + +///USB2 (Bus 0 Dev 19 Fn 0/2) +///Select disable or enable USB2 HCs (Bus 0 Dev 19 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci2EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci2EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci2Enable; + +///USB3 (Bus 0 Dev 22 Fn 0/2) +///Select disable or enable USB3 HCs (Bus 0 Dev 22 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci3EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci3EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci3Enable; + +///USB4 (Bus 0 Dev 20 Fn 5) +///Select disable or enable USB4 HC (Bus 0 Dev 20 Fn 5) +typedef enum { + IdsNvFchUsbOhci4EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci4EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci4Enable; + +///Hardware Monitor Enable +///Master switch to enable or disable hardware monitor function +typedef enum { + IdsNvFchHwmEnableDisabled = 0,///<Disabled + IdsNvFchHwmEnableEnabled = 1,///<Enabled +} IdsNvFchHwmEnable; + +///In-Chip IR +///Enable or disable the In-Chip IR +typedef enum { + IdsNvFchIrConfigDisabled = 0,///<Disabled + IdsNvFchIrConfigRX_TX0_Only = 1,///<RX_TX0 Only + IdsNvFchIrConfigRX_TX1_Only = 2,///<RX_TX1 Only + IdsNvFchIrConfigRX__TX0__and_TX1 = 3,///<RX, TX0, and TX1 +} IdsNvFchIrConfig; + +///SD Configuration Mode +///Select SD Mode +typedef enum { + IdsNvFchSdConfigDisabled = 0,///<Disabled + IdsNvFchSdConfigADMA = 1,///<ADMA + IdsNvFchSdConfigDMA = 2,///<DMA + IdsNvFchSdConfigPIO = 3,///<PIO +} IdsNvFchSdConfig; + +///Azalia Device +///Select disable or enable Azalia Device +typedef enum { + IdsNvFchAzaliaControlAuto = 0,///<Auto + IdsNvFchAzaliaControlDisabled = 1,///<Disabled + IdsNvFchAzaliaControlEnabled = 2,///<Enabled + IdsNvFchAzaliaControlReserved = 3,///<Reserved +} IdsNvFchAzaliaControl; + +///Integrated Graphics Controller +///Enable Integrate Graphics controller +typedef enum { + IdsNvGnbGfxiGPU_CONTROLAuto = 0,///<Auto + IdsNvGnbGfxiGPU_CONTROLDisabled = 1,///<Disabled + IdsNvGnbGfxiGPU_CONTROLForces = 2,///<Forces +} IdsNvGnbGfxiGPU_CONTROL; + +///UMA Frame buffer Size +///Set UMA FB size +typedef enum { + IdsNvGnbGfxUmaFrameBufferSizeAuto = 0,///<Auto + IdsNvGnbGfxUmaFrameBufferSize32M = 1,///<32M + IdsNvGnbGfxUmaFrameBufferSize64M = 2,///<64M + IdsNvGnbGfxUmaFrameBufferSize128M = 3,///<128M + IdsNvGnbGfxUmaFrameBufferSize256M = 4,///<256M + IdsNvGnbGfxUmaFrameBufferSize384M = 5,///<384M + IdsNvGnbGfxUmaFrameBufferSize512M = 6,///<512M + IdsNvGnbGfxUmaFrameBufferSize1G = 7,///<1G + IdsNvGnbGfxUmaFrameBufferSize2G = 8,///<2G + IdsNvGnbGfxUmaFrameBufferSize4G = 9,///<4G +} IdsNvGnbGfxUmaFrameBufferSize; + +///NB Azalia +///Enable Integrate HD Audio controller +typedef enum { + IdsNvGnbGfxNbAzaliaDisabled = 0,///<Disabled + IdsNvGnbGfxNbAzaliaEnabled = 1,///<Enabled + IdsNvGnbGfxNbAzaliaAuto = 0xf,///<Auto +} IdsNvGnbGfxNbAzalia; + +///PSPP Policy +///PCIe speed power policy +typedef enum { + IdsNvGnbPciePsppPolicyDisabled = 0,///<Disabled + IdsNvGnbPciePsppPolicyPerformance = 1,///<Performance + IdsNvGnbPciePsppPolicyBalanced_High = 2,///<Balanced-High + IdsNvGnbPciePsppPolicyBalanced_Low = 3,///<Balanced-Low + IdsNvGnbPciePsppPolicyPower_Saving = 4,///<Power Saving + IdsNvGnbPciePsppPolicyAuto = 5,///<Auto +} IdsNvGnbPciePsppPolicy; + +///IOMMU +/// +typedef enum { + IdsNvGnbNbIOMMUDisabled = 0,///<Disabled + IdsNvGnbNbIOMMUEnabled = 1,///<Enabled +} IdsNvGnbNbIOMMU; + +#endif // _IDSF15KVNVDEF_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnAllService.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnAllService.h new file mode 100644 index 0000000000..9e99f326cb --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnAllService.h @@ -0,0 +1,49 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA IDS Translation + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _IDS_F15_TN_ALLSERVICE_H_ +#define _IDS_F15_TN_ALLSERVICE_H_ +#ifdef __IDS_EXTENDED__ + #include IDS_EXT_INCLUDE_F15_TN (IdsIntF15TnAllService) +#endif + +#endif //_IDS_F15_TN_ALLSERVICE_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnNvDef.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnNvDef.h new file mode 100644 index 0000000000..bdc7ac1887 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/Family/0x15/TN/IdsF15TnNvDef.h @@ -0,0 +1,287 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * IDS NV definition for F15Tn + * + * Auto generated from CBS XML file + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS F15Tn + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _IDSF15TNNVDEF_H_ +#define _IDSF15TNNVDEF_H_ +///HTC Enable +///Enable or disable Hardware Thermal Control. D18F3x64[0] +typedef enum { + IdsNvThermalHTCEnDisabled = 0,///<Disabled + IdsNvThermalHTCEnEnabled = 1,///<Enabled + IdsNvThermalHTCEnAuto = 3,///<Auto +} IdsNvThermalHTCEn; + +///HTC Override +///Enable or disable Thermal Control Override +typedef enum { + IdsNvThermalHTCOverrideDisabled = 0,///<Disabled + IdsNvThermalHTCOverrideEnabled = 1,///<Enabled +} IdsNvThermalHTCOverride; + +///HTC P-state limit select +///Specifies the P-state limit of all cores when in the P-state based HTC-active state +#define IdsNvThermalHtcPstateLimitMin 0 +#define IdsNvThermalHtcPstateLimitMax 7 + +///HTC Temperature Hysteresis +///Sets the temperature hysteresis for HTC. D18F3x64[27:24] +#define IdsNvThermalHTCTempHysMin 0 +#define IdsNvThermalHTCTempHysMax 0xF + +///HTC Activation Temp +///Sets the HTC temperature limit. D18F3x64[22:16] +#define IdsNvThermalHTCActTempMin 0 +#define IdsNvThermalHTCActTempMax 0x7F + +///Bank Interleave +///Interleave memory blocks across the DRAM chip selects for node 0. +typedef enum { + IdsNvMemMappingBankInterleaveDisabled = 0,///<Disabled + IdsNvMemMappingBankInterleaveAuto = 1,///<Auto +} IdsNvMemMappingBankInterleave; + +///DRAM Channel Interleave +///Interleave between two DCTs when they are in unganged mode. +typedef enum { + IdsNvMemMappingChlInterleaveAddress_bit_6 = 0,///<Address bit 6 + IdsNvMemMappingChlInterleaveAddress_bit_12 = 1,///<Address bit 12 + IdsNvMemMappingChlInterleaveHash__exclusive_OR_of_address_bits_20_16__6_ = 2,///<Hash: exclusive OR of address bits[20:16, 6] + IdsNvMemMappingChlInterleaveHash__excluseive_OR_of_address_bits_20_16__9_ = 3,///<Hash: excluseive OR of address bits[20:16, 9] + IdsNvMemMappingChlInterleaveAddress_bit_8 = 4,///<Address bit 8 + IdsNvMemMappingChlInterleaveAddress_bit_9 = 5,///<Address bit 9 + IdsNvMemMappingChlInterleaveDisabled = 0xF,///<Disabled + IdsNvMemMappingChlInterleaveAuto = 0xFF,///<Auto +} IdsNvMemMappingChlInterleave; + +///ECC Symbol Size +///ECC symbol size and code selection. D18F3x180[25] +typedef enum { + IdsNvEccSymbolSizex4 = 0,///<x4 + IdsNvEccSymbolSizex8 = 1,///<x8 + IdsNvEccSymbolSizeAuto = 3,///<Auto +} IdsNvEccSymbolSize; + +///DRAM prefetches triggered from CPU requests +///Enable or disable DRAM prefetches Prefetch triggered by CPU requests. +typedef enum { + IdsNvPrefetchPrefCpuDis0 = 0,///<0 + IdsNvPrefetchPrefCpuDis1 = 1,///<1 + IdsNvPrefetchPrefCpuDisAuto = 3,///<Auto +} IdsNvPrefetchPrefCpuDis; + +///HW prefetch training on SW Prefetches +///Enable or disable Hardware Prefetch training on Software Prefetches +typedef enum { + IdsNvPrefetchDisHWPFforSWPF0 = 0,///<0 + IdsNvPrefetchDisHWPFforSWPF1 = 1,///<1 + IdsNvPrefetchDisHWPFforSWPFAuto = 3,///<Auto +} IdsNvPrefetchDisHWPFforSWPF; + +///Hardware Prefetches +///Enable or disable Hardware Prefetches. +typedef enum { + IdsNvPrefetchDisHWPF0 = 0,///<0 + IdsNvPrefetchDisHWPF1 = 1,///<1 + IdsNvPrefetchDisHWPFAuto = 3,///<Auto +} IdsNvPrefetchDisHWPF; + +///UMI Gen2 +///Enable or disable UMI link Gen2 +typedef enum { + IdsNvFchGppUmiGen2Disabled = 0,///<Disabled + IdsNvFchGppUmiGen2Enabled = 1,///<Enabled +} IdsNvFchGppUmiGen2; + +///SATA Controller +///Disable or enable OnChip SATA controller +typedef enum { + IdsNvFchSataEnableDisabled = 0,///<Disabled + IdsNvFchSataEnableEnabled = 1,///<Enabled +} IdsNvFchSataEnable; + +///SATA Mode +///Select OnChip SATA Type +typedef enum { + IdsNvFchSataClassNative_IDE = 0,///<Native IDE + IdsNvFchSataClassRAID = 1,///<RAID + IdsNvFchSataClassAHCI = 3,///<AHCI + IdsNvFchSataClassLegacy_IDE = 3,///<Legacy IDE + IdsNvFchSataClassIDE__AHCI = 4,///<IDE->AHCI + IdsNvFchSataClassAHCI_as_ID_0x7804 = 5,///<AHCI as ID 0x7804 + IdsNvFchSataClassIDE__AHCI_as_ID_0x7804 = 6,///<IDE->AHCI as ID 0x7804 +} IdsNvFchSataClass; + +///OnChip IDE +///Select OnChip IDE controller mode +typedef enum { + IdsNvFchSataIdeModeLegacy_IDE = 0,///<Legacy IDE + IdsNvFchSataIdeModeNative_IDE = 1,///<Native IDE +} IdsNvFchSataIdeMode; + +///IDE Controller +///Disable or enable OnChip IDE controller +typedef enum { + IdsNvFchSataIdeEnableDisabled = 0,///<Disabled + IdsNvFchSataIdeEnableEnabled = 1,///<Enabled +} IdsNvFchSataIdeEnable; + +///XHC Switch (Bus 0 Dev 16 Fn 0/1) +///Select disable or enable XHCI HCs (Bus 0 Dev 16 Fn 0/1) +typedef enum { + IdsNvFchUsbXhciSwitchDisabled = 0,///<Disabled + IdsNvFchUsbXhciSwitchEnabled = 1,///<Enabled +} IdsNvFchUsbXhciSwitch; + +///USB1(Bus 0 Dev 18 Fn 0/2) +///Select disable or enable USB1 HCs (Bus 0 Dev 18 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci1EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci1EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci1Enable; + +///USB2 (Bus 0 Dev 19 Fn 0/2) +///Select disable or enable USB2 HCs (Bus 0 Dev 19 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci2EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci2EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci2Enable; + +///USB3 (Bus 0 Dev 22 Fn 0/2) +///Select disable or enable USB3 HCs (Bus 0 Dev 22 Fn 0/2) +typedef enum { + IdsNvFchUsbOhci3EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci3EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci3Enable; + +///USB4 (Bus 0 Dev 20 Fn 5) +///Select disable or enable USB4 HC (Bus 0 Dev 20 Fn 5) +typedef enum { + IdsNvFchUsbOhci4EnableDisabled = 0,///<Disabled + IdsNvFchUsbOhci4EnableEnabled = 1,///<Enabled +} IdsNvFchUsbOhci4Enable; + +///Hardware Monitor Enable +///Master switch to enable or disable hardware monitor function +typedef enum { + IdsNvFchHwmEnableDisabled = 0,///<Disabled + IdsNvFchHwmEnableEnabled = 1,///<Enabled +} IdsNvFchHwmEnable; + +///In-Chip IR +///Enable or disable the In-Chip IR +typedef enum { + IdsNvFchIrConfigDisabled = 0,///<Disabled + IdsNvFchIrConfigRX_TX0_Only = 1,///<RX_TX0 Only + IdsNvFchIrConfigRX_TX1_Only = 2,///<RX_TX1 Only + IdsNvFchIrConfigRX__TX0__and_TX1 = 3,///<RX, TX0, and TX1 +} IdsNvFchIrConfig; + +///SD Configuration Mode +///Select SD Mode +typedef enum { + IdsNvFchSdConfigDisabled = 0,///<Disabled + IdsNvFchSdConfigADMA = 1,///<ADMA + IdsNvFchSdConfigDMA = 2,///<DMA + IdsNvFchSdConfigPIO = 3,///<PIO +} IdsNvFchSdConfig; + +///Azalia Device +///Select disable or enable Azalia Device +typedef enum { + IdsNvFchAzaliaControlAuto = 0,///<Auto + IdsNvFchAzaliaControlDisabled = 1,///<Disabled + IdsNvFchAzaliaControlEnabled = 2,///<Enabled + IdsNvFchAzaliaControlReserved = 3,///<Reserved +} IdsNvFchAzaliaControl; + +///Integrated Graphics Controller +///Enable Integrate Graphics controller +typedef enum { + IdsNvGnbGfxiGPU_CONTROLAuto = 0,///<Auto + IdsNvGnbGfxiGPU_CONTROLDisabled = 1,///<Disabled + IdsNvGnbGfxiGPU_CONTROLForces = 2,///<Forces +} IdsNvGnbGfxiGPU_CONTROL; + +///UMA Frame buffer Size +///Set UMA FB size +typedef enum { + IdsNvGnbGfxUmaFrameBufferSizeAuto = 0,///<Auto + IdsNvGnbGfxUmaFrameBufferSize32M = 1,///<32M + IdsNvGnbGfxUmaFrameBufferSize64M = 2,///<64M + IdsNvGnbGfxUmaFrameBufferSize128M = 3,///<128M + IdsNvGnbGfxUmaFrameBufferSize256M = 4,///<256M + IdsNvGnbGfxUmaFrameBufferSize384M = 5,///<384M + IdsNvGnbGfxUmaFrameBufferSize512M = 6,///<512M + IdsNvGnbGfxUmaFrameBufferSize1G = 7,///<1G + IdsNvGnbGfxUmaFrameBufferSize2G = 8,///<2G + IdsNvGnbGfxUmaFrameBufferSize4G = 9,///<4G +} IdsNvGnbGfxUmaFrameBufferSize; + +///NB Azalia +///Enable Integrate HD Audio controller +typedef enum { + IdsNvGnbGfxNbAzaliaDisabled = 0,///<Disabled + IdsNvGnbGfxNbAzaliaEnabled = 1,///<Enabled + IdsNvGnbGfxNbAzaliaAuto = 0xf,///<Auto +} IdsNvGnbGfxNbAzalia; + +///PSPP Policy +///PCIe speed power policy +typedef enum { + IdsNvGnbPciePsppPolicyDisabled = 0,///<Disabled + IdsNvGnbPciePsppPolicyPerformance = 1,///<Performance + IdsNvGnbPciePsppPolicyBalanced_High = 2,///<Balanced-High + IdsNvGnbPciePsppPolicyBalanced_Low = 3,///<Balanced-Low + IdsNvGnbPciePsppPolicyPower_Saving = 4,///<Power Saving + IdsNvGnbPciePsppPolicyAuto = 5,///<Auto +} IdsNvGnbPciePsppPolicy; + +///IOMMU +/// +typedef enum { + IdsNvGnbNbIOMMUDisabled = 0,///<Disabled + IdsNvGnbNbIOMMUEnabled = 1,///<Enabled +} IdsNvGnbNbIOMMU; + +#endif // _IDSF15TNNVDEF_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/IdsLib.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/IdsLib.h new file mode 100644 index 0000000000..2aec84a1de --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/IdsLib.h @@ -0,0 +1,381 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA Integrated Debug Macros + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _IDS_LIB_H_ +#define _IDS_LIB_H_ +#include "OptionsIds.h" +#include "cpuRegisters.h" +#include "cpuApicUtilities.h" +#include "Table.h" +///Specific time stamp performance analysis which need ids control support +#if IDSOPT_CONTROL_ENABLED == TRUE + #define PERF_SPEC_TS_ANALYSE(StdHeader) IdsPerfSpecTsAnalyse(StdHeader) +#else + #define PERF_SPEC_TS_ANALYSE(StdHeader) +#endif + +#define IDS_NV_READ(NvValue, Nvid, IdsNvPtr, StdHeader)\ + NvValue = AmdIdsNvReader ((Nvid), (IdsNvPtr), (StdHeader)); + +#define IDS_NV_READ_SKIP(NvValue, Nvid, IdsNvPtr, StdHeader)\ + if (((NvValue) = AmdIdsNvReader ((Nvid), (IdsNvPtr), (StdHeader))) != IDS_UNSUPPORTED) +#define IDS_GET_MASK32(HighBit, LowBit) ((((UINT32) 1 << (HighBit - LowBit + 1)) - 1) << LowBit) + +#define IDS_MAX_MEM_ITEMS 80 ///< Maximum IDS Mem Table Size in Heap. +///Macro for Ids family feat +#define MAKE_IDS_FAMILY_FEAT_ALL_CORES(FEAT_ID, FAMILY, FUNCTION) \ + {IDS_FEAT_COMMON, IDS_ALL_CORES, FEAT_ID, FAMILY, FUNCTION} + +///Macro for signature +#define MAKE_SIGNATURE(a, b, c, d) ((UINT32) ((d << 24) | (c << 16) | (b << 8) | a)) +typedef UINT32 SIGNATURE; + +// TYPEDEFS, STRUCTURES, ENUMS +// + +typedef AGESA_STATUS (*PF_IDS_AP_TASK) (VOID *AptaskPara, AMD_CONFIG_PARAMS *StdHeader); + +///Structure define for IdsAgesaRunFcnOnApLate +typedef struct _IDSAPLATETASK { + PF_IDS_AP_TASK ApTask; ///< Point function which AP need to do + VOID *ApTaskPara; ///< Point to Ap function parameter1 +} IDSAPLATETASK; + +/// Data Structure defining IDS Data in HEAP +/// This data structure contains information that is stored in HEAP and will be +/// used in IDS backend function. It includes the size of memory to be allocated +/// for IDS, the relative offsets of the mapping table IDS setup options, the GRA +/// table and the register table to override mem setting. It also includes a base +/// address of IDS override image which will be used to control the behavior of +/// AGESA testpoint if this feature is enabled. +typedef struct { + BOOLEAN IgnoreIdsDefault; ///< Control ignore Default value of IDS NV list specified by IdsNvTableOffset + UINT64 IdsImageBase; ///< IDS Override Image Base Address + UINT32 IdsHeapMemSize; ///< IDS Total Memory Size in Heap + UINT32 IdsNvTableOffset; ///< Offset of IDS NV Table + UINT32 IdsMemTableOffset; ///< Offset of IDS Mem Table + UINT32 IdsExtendOffset; ///< Offset of Ids extend heap +} IDS_CONTROL_STRUCT; + +/// Data Structure of Parameters for TestPoint_TSC. +typedef struct { + UINT32 LineInFile; ///< Line of current time counter + UINT64 Description; ///<Description ID + UINT64 StartTsc; ///< The StartTimer of TestPoint_TSC +} TestPoint_TSC; + +#define MAX_PERFORMANCE_UNIT_NUM (IDS_TP_END - TP_BEGINPROCAMDINITEARLY) +/// Data Structure of Parameters for TP_Perf_STRUCT. +typedef struct { + UINT32 Signature; ///< "PERF" + UINT32 Version; ///< version + UINT32 Index; ///< The Index of TP_Perf_STRUCT + UINT32 TscInMhz; ///< Tsc counter in 1 mhz + TestPoint_TSC TP[MAX_PERFORMANCE_UNIT_NUM]; ///< The TP of TP_Perf_STRUCT +} TP_Perf_STRUCT; + +///Bus speed Optimization +typedef enum { + IDS_POWER_POLICY_PERFORMANCE = 0, ///< Performance + IDS_POWER_POLICY_POWER = 1, ///< Power + IDS_POWER_POLICY_AUTO = 3, ///< Auto +} IDS_NV_AMDBUSSPEEDOPTIMIZATION; + +///IDS early AP task +typedef struct _IDS_EARLY_AP_TASK0 { + UINT8 Core; ///< Core to run Aptask + AP_TASK ApTask; ///< Speicify task property +} IDS_EARLY_AP_TASK0; + +#define IDS_EARLY_AP_TASK_PARA_NUM 100 +///IDS early AP task +typedef struct _IDS_EARLY_AP_TASK { + IDS_EARLY_AP_TASK0 Ap_Task0; ///< Ap Task exclude parameter buffer + UINT8 Parameters[IDS_EARLY_AP_TASK_PARA_NUM]; ///< Parameter buffer +} IDS_EARLY_AP_TASK; + +///AP service Time Point +typedef enum { + IDS_AP_RUN_CODE_EARLY, ///< Amdinitearly + IDS_AP_RUN_CODE_POST, ///< Amdinitpost + IDS_AP_RUN_CODE_LATE, ///< After AmdInitPost + IDS_AP_RUN_CODE_END ///< Last element +} IDS_AP_RUN_CODE_TIMEPOINT; + +/// Parameters for IdsRunCodeOnCores +typedef struct _IDS_RUNCODE_PARAMS { + IDS_AP_RUN_CODE_TIMEPOINT TimePoint; ///< TimePoint + UINT8 Socket; ///< IDS_ALL_SOCKET: all sockets + UINT8 Core; ///< IDS_ALL_CORE: all cores + PF_AP_TASK_IO ApTask; ///< Only support this type function + UINT16 ParamsDataSizeInDwords; ///< Size of the data to be transferred rounded up to the nearest dword + VOID *ParamsDataPtr; ///< Pointer to the parameter +} IDS_RUNCODE_PARAMS; + + +#define IDS_ALL_SOCKET 0xFF +#define IDS_ALL_MODULE 0xFF +#define IDS_ALL_CORE 0xFF +#define IDS_ALL_DCT 0xFF + +/*---------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *---------------------------------------------------------------------------------------- + */ + +IDS_STATUS +IdsSubUCode ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubGangingMode ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubPowerDownMode ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubAllMemClkEn ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubPostPState ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubPowerPolicyOverride ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +AGESA_STATUS +AmdIdsCtrlInitialize ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +AmdIdsNvReader ( + IN UINT16 IdsNvId, + IN IDS_NV_ITEM *NvTablePtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AmdGetIdsNvTable ( + IN OUT VOID **IdsNvTable, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsOutPort ( + IN UINT32 Addr, + IN UINT32 Value, + IN UINT32 Flag + ); + +IDS_STATUS +IdsCommonReturn ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +AGESA_STATUS +IdsAgesaRunFcnOnApLate ( + IN UINTN ApicIdOfCore, + IN IDSAPLATETASK *ApLateTaskPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsRunCodeOnCores ( + IN IDS_RUNCODE_PARAMS *PIdsRuncodeParams, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsAgesaRunFcnOnAllCoresLate ( + IN IDSAPLATETASK *ApLateTaskPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +IdsParseFeatTbl ( + IN AGESA_IDS_OPTION IdsOption, + IN CONST IDS_FAMILY_FEAT_STRUCT * PIdsFeatTbl[], + IN OUT VOID *DataPtr, + IN IDS_NV_ITEM *IdsNvPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +IdsSubPowerDownCtrl ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +IDS_STATUS +IdsSubHdtOut ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +UINT8 +IdsGetNumPstatesFamCommon ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsApRunCodeOnAllLocalCores ( + IN AP_TASK *TaskPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); +IDS_STATUS +IdsSubTargetPstate ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +VOID +IdsMakePciRegEntry ( + IN OUT TABLE_ENTRY_FIELDS **TableEntry, + IN UINT64 Family, + IN UINT64 Revision, + IN UINT32 PciAddr, + IN UINT32 Data, + IN UINT32 Mask + ); + +VOID +IdsLibPciWriteBitsToAllNode ( + IN PCI_ADDR PciAddress, + IN UINT8 Highbit, + IN UINT8 Lowbit, + IN UINT32 *Value, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); +VOID +IdsRunCodeOnCoreEarly ( + IN UINT8 Socket, + IN UINT8 Core, + IN AP_TASK* ApTask, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsGetMask64bits ( + IN UINT64 RegVal, + IN UINT8 Highbit, + IN UINT8 Lowbit, + IN OUT UINT64 *AndMask, + IN OUT UINT64 *OrMask + ); + +VOID +IdsGetMask32bits ( + IN UINT32 RegVal, + IN UINT8 Highbit, + IN UINT8 Lowbit, + IN OUT UINT32 *AndMask, + IN OUT UINT32 *OrMask + ); + +VOID +IdsGetMask16bits ( + IN UINT16 RegVal, + IN UINT8 Highbit, + IN UINT8 Lowbit, + IN OUT UINT32 *AndMask, + IN OUT UINT32 *OrMask + ); + +VOID +IdsGetStartEndModule ( + IN UINT8 ModuleId, + IN OUT UINT8 *StartModule, + IN OUT UINT8 *EndModule + ); + + +VOID +IdsGetStartEndSocket ( + IN UINT8 SocketId, + IN OUT UINT8 *StartSocket, + IN OUT UINT8 *EndSocket + ); + +BOOLEAN +IdsCheckPciExist ( + IN PCI_ADDR PciAddr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsLibDataMaskSet32 ( + IN OUT UINT32 *Value, + IN UINT32 AndMask, + IN UINT32 OrMask + ); +#define IDS_CPB_BOOST_DIS_IGNORE 0xFFFFFFFFul + +#endif //_IDS_LIB_H_ + diff --git a/src/vendorcode/amd/pi/00630F01/Proc/IDS/OptionsIds.h b/src/vendorcode/amd/pi/00630F01/Proc/IDS/OptionsIds.h new file mode 100644 index 0000000000..0d58e7eb54 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/Proc/IDS/OptionsIds.h @@ -0,0 +1,92 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 281181 $ @e \$Date: 2013-12-18 02:18:55 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * + * Warning: When you enable the IDSOPT_CONTROL_NV_TO_CMOS feature. + * please make the cmos region defined by IDS_OPT_CMOS_REGION_START & + * IDS_OPT_CMOS_REGION_END can be touched between IDS HOOK point + * IDS_CPU_Early_Override and IDS_BEFORE_AP_EARLY_HALT of BSP + * + * IDSOPT_CONTROL_NV_TO_CMOS + * IDS_OPT_CMOS_INDEX_PORT + * IDS_OPT_CMOS_DATA_PORT + * IDS_OPT_CMOS_REGION_START + * IDS_OPT_CMOS_REGION_END + * + * IDSOPT_TRACING_ENABLED + * IDSOPT_TRACING_CONSOLE_HDTOUT + * IDSOPT_TRACING_CONSOLE_SERIALPORT + * IDSOPT_SERIAL_PORT (default 0x3F8) + * IDSOPT_TRACING_CONSOLE_REDIRECT_IO + * IDSOPT_DEBUG_PRINT_IO_PORT (default 0x80) + * IDSOPT_TRACING_CONSOLE_RAM + * IDSOPT_DPRAM_BASE + * IDSOPT_DPRAM_SIZE + * IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL (default FALSE) + * IDSOPT_CUSTOMIZE_TRACING_SERVICE + * IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT + * IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT + * + * IDSOPT_TRACE_BLD_CFG + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * IDSOPT_DEBUG_CODE_ENABLED + * IDSOPT_IDT_EXCEPTION_TRAP + * IDSOPT_C_OPTIMIZATION_DISABLED + * + **/ + +#endif diff --git a/src/vendorcode/amd/pi/00630F01/binaryPI/AGESA.c b/src/vendorcode/amd/pi/00630F01/binaryPI/AGESA.c new file mode 100644 index 0000000000..7a6851df65 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/binaryPI/AGESA.c @@ -0,0 +1,696 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * 2013 - 2014, Sage Electronic Engineering, LLC + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include <AGESA.h> +#include <agesawrapper.h> +#include <AcpiLib.h> +#include <amdlib.h> +#include <cbfs.h> +#include <FchCommonCfg.h> +#include <Fch.h> +#include <FchDef.h> +#include <FieldAccessors.h> + +#define CONFIG_CBFS_AGESA_NAME "AGESA" + +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ); + +CONST UINT32 ImageSignature = IMAGE_SIGNATURE; +CONST UINT32 ModuleSignature = MODULE_SIGNATURE; +CONST CHAR8 ModuleIdentifier[] = AGESA_ID; + +/************************************************************************ + * + * AGESA Basic Level interface structure definition and function prototypes + * + ***********************************************************************/ + + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_CREATE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_RELEASE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResetParams->StdHeader.Func = AMD_INIT_RESET; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResetParams); +} + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EarlyParams->StdHeader.Func = AMD_INIT_EARLY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EarlyParams); +} + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + PostParams->StdHeader.Func = AMD_INIT_POST; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(PostParams); +} + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EnvParams->StdHeader.Func = AMD_INIT_ENV; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EnvParams); +} + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + MidParams->StdHeader.Func = AMD_INIT_MID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(MidParams); +} + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + LateParams->StdHeader.Func = AMD_INIT_LATE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(LateParams); +} + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + RecoveryParams->StdHeader.Func = AMD_INIT_RECOVERY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(RecoveryParams); +} + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResumeParams->StdHeader.Func = AMD_INIT_RESUME; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResumeParams); +} + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + S3LateParams->StdHeader.Func = AMD_S3LATE_RESTORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(S3LateParams); +} + +/********************************************************************** + * Interface call: AmdS3Save + **********************************************************************/ +AGESA_STATUS +AmdS3Save ( + IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdS3SaveParams->StdHeader.Func = AMD_S3_SAVE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdS3SaveParams); +} + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = AMD_LATE_RUN_AP_TASK; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamApic->StdHeader.Func = AMD_GET_APIC_ID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamApic); +} + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamGetPci->StdHeader.Func = AMD_GET_PCI_ADDRESS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamGetPci); +} + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamIdentify->StdHeader.Func = AMD_IDENTIFY_CORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamIdentify); +} + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + Event->StdHeader.Func = AMD_READ_EVENT_LOG; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(Event); +} + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdDimmIdentify->StdHeader.Func = AMD_IDENTIFY_DIMMS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdDimmIdentify); +} + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = -1; + return AGESA_UNSUPPORTED; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdGetDataEye->StdHeader.Func = AMD_GET_2D_DATA_EYE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdGetDataEye); +} + +/********************************************************************** + * FCH Functions + **********************************************************************/ + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +VOID +FchInitS3EarlyRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_EARLY_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +VOID +FchInitS3LateRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_LATE_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * WaitForEcLDN9MailboxCmdAck + * + * + * @param[in] StdHeader + * + */ +VOID +WaitForEcLDN9MailboxCmdAck ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(StdHeader); +} + +/** + * ImcSleep - IMC Sleep. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcSleep ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * SoftwareDisableImc - Software disable IMC strap + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +SoftwareDisableImc ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcEnableSurebootTimer - IMC Enable Sureboot Timer. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcEnableSurebootTimer ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcDisableSurebootTimer - IMC Disable Sureboot Timer. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcDisableSurebootTimer ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcWakeup - IMC Wakeup. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcWakeup ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcIdle - IMC Idle. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcIdle ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +// TODO This has to be removed +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_ALLOCATE_BUFFER; + + InterfaceParams.AllocationMethod = PreMemHeap; + InterfaceParams.NewStructPtr = AllocateHeapParams; + + return Dispatcher(&InterfaceParams); +} + +// TODO This has to be removed +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_DEALLOCATE_BUFFER; + + InterfaceParams.NewStructPtr = &BufferHandle; + + return Dispatcher(&InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_SET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + return status; +} + +/********************************************************************** + * Interface call: AmdGetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + ASSERT(module); + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + ASSERT(Dispatcher); + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_GET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = *value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + ASSERT(AGESA_SUCCESS == status); + + *value = AccessorParams.FieldValue; + size = AccessorParams.FieldSize; + + return status; +} diff --git a/src/vendorcode/amd/pi/00630F01/binaryPI/FieldAccessors.h b/src/vendorcode/amd/pi/00630F01/binaryPI/FieldAccessors.h new file mode 100644 index 0000000000..bfbccbe164 --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/binaryPI/FieldAccessors.h @@ -0,0 +1,111 @@ +/***************************************************************************** + * + * Copyright (c) 2013 - 2014, Sage Electronic Engineering, LLC + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FIELDACCESSORS_H_ +#define _FIELDACCESSORS_H_ + +#include "AGESA.h" + +/// AGESA value name +typedef enum { + AMD_GLOBAL_USER_OPTIONS = 0x00020000, + AMD_GLOBAL_NUM_SOCKETS = 0x00020001, + AMD_GLOBAL_NUM_MODULES = 0x00020002, +} AGESA_FIELD_NAME; + +typedef AGESA_STATUS (*SETTER_ENTRY) ( + IN OUT VOID* value, + IN UINT32 size + ); + +typedef AGESA_STATUS (*GETTER_ENTRY) ( + IN OUT VOID** value, + IN UINT32 size + ); + +/// Accessor Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_FIELD_NAME FieldName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< For pointers, how to allocate space for copied data + IN OUT VOID *Struct; ///< The struct for the service. + IN OUT UINT32 FieldSize; ///< The size of the data value. + IN OUT VOID *FieldValue; ///< The value retrieved or set into the target structure. +} AMD_ACCESSOR_PARAMS; + + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ); + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ); + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; + SETTER_ENTRY SetValueEntryPoint; + GETTER_ENTRY GetValueEntryPoint; +} ACCESSOR_DISPATCH_TABLE; + +AGESA_STATUS +GetUserOptions( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumSockets( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumModules( + IN OUT VOID** value, + IN UINT32 size + ); + +#endif /* _FIELDACCESSORS_H_ */ diff --git a/src/vendorcode/amd/pi/00630F01/binaryPI/gcc-intrin.h b/src/vendorcode/amd/pi/00630F01/binaryPI/gcc-intrin.h new file mode 100644 index 0000000000..a63771570a --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/binaryPI/gcc-intrin.h @@ -0,0 +1,833 @@ +/* + Compatibility <intrin_x86.h> header for GCC -- GCC equivalents of intrinsic + Microsoft Visual C++ functions. Originally developed for the ReactOS + (<http://www.reactos.org/>) and TinyKrnl (<http://www.tinykrnl.org/>) + projects. + + Copyright (c) 2006 KJK::Hyperion <hackbunny@reactos.com> + 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> + 2014 Sage Electronic Engineering, LLC + All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in + all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. +*/ + +#if defined (__GNUC__) + +#if !defined(AMDLIB_OPTIMIZE) + #define AMDLIB_OPTIMIZE +#endif + +/* I/O intrin functions. */ +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned char __inbyte(unsigned short Port) +{ + unsigned char value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned short __inword(unsigned short Port) +{ + unsigned short value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __indword(unsigned short Port) +{ + unsigned long value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + return value; + +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outbyte(unsigned short Port,unsigned char Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outword(unsigned short Port,unsigned short Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outdword(unsigned short Port,unsigned long Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __inbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insb" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __inwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insw" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __indwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insl" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsb" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsw" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outdwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsl" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr0, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr1(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr1, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr2, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr3, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr7(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr7, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readdr0 (); + break; + + case 1: + return __readdr1 (); + break; + + case 2: + return __readdr2 (); + break; + + case 3: + return __readdr3 (); + break; + + case 7: + return __readdr7 (); + break; + + default: + return -1; + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr0" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr1(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr1" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr2" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr3" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr7(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr7" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writedr0 (Data); + break; + + case 1: + __writedr1 (Data); + break; + + case 2: + __writedr2 (Data); + break; + + case 3: + __writedr3 (Data); + break; + + case 7: + __writedr7 (Data); + break; + + default: + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr0, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr2, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr3, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr4(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr4, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr8(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr8, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readcr0 (); + break; + + case 2: + return __readcr2 (); + break; + + case 3: + return __readcr3 (); + break; + + case 4: + return __readcr4 (); + break; + + case 8: + return __readcr8 (); + break; + + default: + return -1; + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr0" + : + : "r" (Data) + : "memory" + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr2" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr3" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr4(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr4" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr8(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr8" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writecr0 (Data); + break; + + case 2: + __writecr2 (Data); + break; + + case 3: + __writecr3 (Data); + break; + + case 4: + __writecr4 (Data); + break; + + case 8: + __writecr8 (Data); + break; + + default: + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +UINT64 __readmsr(UINT32 msr) +{ + UINT64 retval; + __asm__ __volatile__( + "rdmsr" + : "=A" (retval) + : "c" (msr) + ); + return retval; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writemsr (UINT32 msr, UINT64 Value) +{ + __asm__ __volatile__ ( + "wrmsr" + : + : "c" (msr), "A" (Value) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +UINT64 __rdtsc(void) +{ + UINT64 retval; + __asm__ __volatile__ ( + "rdtsc" + : "=A" (retval)); + return retval; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __cpuid(int CPUInfo[], const int InfoType) +{ + __asm__ __volatile__( + "cpuid" + :"=a" (CPUInfo[0]), "=b" (CPUInfo[1]), "=c" (CPUInfo[2]), "=d" (CPUInfo[3]) + : "a" (InfoType) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _disable(void) +{ + __asm__ __volatile__ ("cli"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _enable(void) +{ + __asm__ __volatile__ ("sti"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __halt(void) +{ + __asm__ __volatile__ ("hlt"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __debugbreak(void) +{ + __asm__ __volatile__ ("int3"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __invd(void) +{ + __asm__ __volatile__ ("invd"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __wbinvd(void) +{ + __asm__ __volatile__ ("wbinvd"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __lidt(void *Source) +{ + __asm__ __volatile__("lidt %0" : : "m"(*(short*)Source)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsbyte(const unsigned long Offset, const unsigned char Data) +{ + __asm__ ("movb %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "iq" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsword(const unsigned long Offset, const unsigned short Data) +{ + __asm__ ("movw %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "ir" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsdword(const unsigned long Offset, const unsigned long Data) +{ + __asm__ ("movl %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "ir" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned char __readfsbyte(const unsigned long Offset) +{ + unsigned char value; + __asm__ ("movb %%fs:%a[Offset], %[value]" + : [value] "=q" (value) + : [Offset] "ir" (Offset)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned short __readfsword(const unsigned long Offset) +{ + unsigned short value; + __asm__ ("movw %%fs:%a[Offset], %[value]" + : [value] "=q" (value) + : [Offset] "ir" (Offset)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readfsdword(unsigned long Offset) +{ + unsigned long value; + __asm__ ("movl %%fs:%a[Offset], %[value]" + : [value] "=r" (value) + : [Offset] "ir" (Offset)); + return value; +} + +#ifdef __SSE3__ +typedef long long __v2di __attribute__ ((__vector_size__ (16))); +typedef long long __m128i __attribute__ ((__vector_size__ (16), __may_alias__)); + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs2 (void *__A, __m128i __B) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_movntdq ((__v2di *)__A, (__v2di)__B); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs (void *__A, void *__B) +{ + __m128i data; + data = (__m128i) __builtin_ia32_lddqu ((char const *)__B); + _mm_stream_si128_fs2 (__A, data); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_clflush_fs (void *__A) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_clflush (__A); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_mfence (void) +{ + __builtin_ia32_mfence (); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_sfence (void) +{ + __builtin_ia32_sfence (); +} +#endif /* __SSE3__ */ + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __stosb(unsigned char *dest, unsigned char data, size_t count) +{ + __asm__ __volatile__ ( + "rep ; stosb " + : "+D" (dest), "+c" (count) + : "a"(data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __movsb(unsigned char *dest, unsigned char *data, size_t count) +{ + __asm__ __volatile__ ( + "movsb " + : "+D" (dest), "+S"(data), "+c" (count) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void debug_point ( unsigned short Port, unsigned long Data ) +{ + __outdword (Port, Data); + __asm__ __volatile__ (".word 0xfeeb"); + +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void delay_point ( unsigned short Port, unsigned long Data, unsigned long delayTime ) +{ + UINTN Index; + Index = 0; + __outdword (Port, Data); + while (Index < delayTime * 600000) { + __outdword (0xE0, 0); + Index ++; + } +} +#endif /* defined (__GNUC__) */ diff --git a/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc new file mode 100644 index 0000000000..2707cab2bf --- /dev/null +++ b/src/vendorcode/amd/pi/00630F01/binaryPI/gcccar.inc @@ -0,0 +1,1596 @@ +/* + * Copyright (c) 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/****************************************************************************** +* AMD Generic Encapsulated Software Architecture +* +* $Workfile:: GccCar.inc $Revision:: 32932 $ +* +* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier +* +******************************************************************************/ + +.altmacro + +BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */ +BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */ +CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */ +CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */ +CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */ +CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */ + +APIC_BASE_ADDRESS = 0x0000001B + APIC_BSC = 8 /* Boot Strap Core */ + +APIC_MSG_REG = 0x380 # Location of BSC message + APIC_MSG = 0x00DE00AD # Message data +APIC_CMD_LO_REG = 0x300 # APIC command low +APIC_CMD_HI_REG = 0x310 # APIC command high + CMD_REG_TO_READ_DATA = 0x00000338 # APIC command for remote read of APIC_MSG_REG + REMOTE_READ_STS = 0x00030000 # Remote read status mask + REMOTE_DELIVERY_PEND = 0x00010000 # Remote read is pending + REMOTE_DELIVERY_DONE = 0x00020000 # Remote read is complete + DELIVERY_STS_BIT = 12 #Delivery status valid bit +APIC_ID_REG = 0x0020 # Local APIC ID offset + APIC20_APICID = 24 +APIC_REMOTE_READ_REG = 0x00C0 # Remote read offset + +# Flags can only run from bits 31 to 24. Bits 23:0 are in use. +AMD_CU_NEED_TO_WAIT = 31 +AMD_CU_SEND_INVD_MSG = 30 +AMD_CU_RESTORE_ES = 29 + +AMD_MTRR_VARIABLE_BASE0 = 0x0200 +AMD_MTRR_VARIABLE_BASE6 = 0x020C +AMD_MTRR_VARIABLE_BASE7 = 0x020E + VMTRR_VALID = 11 + MTRR_TYPE_WB = 0x06 + MTRR_TYPE_WP = 0x05 + MTRR_TYPE_WT = 0x04 + MTRR_TYPE_UC = 0x00 +AMD_MTRR_VARIABLE_MASK7 = 0x020F +AMD_MTRR_FIX64k_00000 = 0x0250 +AMD_MTRR_FIX16k_80000 = 0x0258 +AMD_MTRR_FIX16k_A0000 = 0x0259 +AMD_MTRR_FIX4k_C0000 = 0x0268 +AMD_MTRR_FIX4k_C8000 = 0x0269 +AMD_MTRR_FIX4k_D0000 = 0x026A +AMD_MTRR_FIX4k_D8000 = 0x026B +AMD_MTRR_FIX4k_E0000 = 0x026C +AMD_MTRR_FIX4k_E8000 = 0x026D +AMD_MTRR_FIX4k_F0000 = 0x026E +AMD_MTRR_FIX4k_F8000 = 0x026F + +/* Reproduced from AGESA.h */ +AMD_AP_MTRR_FIX64k_00000 = 0x00000250 +AMD_AP_MTRR_FIX16k_80000 = 0x00000258 +AMD_AP_MTRR_FIX16k_A0000 = 0x00000259 +AMD_AP_MTRR_FIX4k_C0000 = 0x00000268 +AMD_AP_MTRR_FIX4k_C8000 = 0x00000269 +AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A +AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B +AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C +AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D +AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E +AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F +CPU_LIST_TERMINAL = 0xFFFFFFFF + +AMD_MTRR_DEFTYPE = 0x02FF + WB_DRAM_TYPE = 0x1E /* MemType - memory type */ + MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */ + MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */ + +HWCR = 0x0C0010015 /* Hardware Configuration */ + INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */ + +IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */ + /* uses 16h - 19h */ +TOP_MEM = 0x0C001001A /* Top of Memory */ +TOP_MEM2 = 0x0C001001D /* Top of Memory2 */ + +LS_CFG = 0x0C0011020 /* Load-Store Configuration */ + DIS_SS = 28 /* Family 10h,12h,15h:Disable Streng Store functionality */ + DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */ + +IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */ + IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */ + DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */ + DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */ + +DC_CFG = 0x0C0011022 /* Data Cache Configuration */ + DC_DIS_SPEC_TLB_RLD = 4 /* Disable speculative TLB reloads */ + DIS_CLR_WBTOL2_SMC_HIT = 8 /* self modifying code check buffer bit */ + DIS_HW_PF = 13 /* Hardware prefetches bit */ + +CU_CFG = 0x0C0011023 /* Family 15h: Combined Unit Configuration */ + L2_WAY_LOCK_EN = 23 /* L2WayLock - L2 way lock enable */ + L2_FIRST_LOCKED_WAY = 19 /* L2FirstLockedWay - first L2 way lockedh */ + L2_FIRST_LOCKED_WAY_OR_MASK = 0x000780000 + +DE_CFG = 0x0C0011029 /* Decode Configuration */ + CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */ + +BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */ +CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */ + F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */ + IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */ + +CU_CFG3 = 0x0C001102B /* Combined Unit Configuration 3 */ + COMBINE_CR0_CD = 49 /* Combine CR0.CD for both cores of a compute unit */ + +CR0_PE = 0 # Protection Enable +CR0_NW = 29 # Not Write-through +CR0_CD = 30 # Cache Disable +CR0_PG = 31 # Paging Enable + +/* CPUID Functions */ + +CPUID_MODEL = 1 +AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */ +AMD_CPUID_L2Cache = 0X80000006 /* L2/L3 cache info */ +AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */ + APIC_ID_CORE_ID_SIZE = 12 /* ApicIdCoreIdSize bit position */ + +NB_CFG = 0x0C001001F /* Northbridge Configuration Register */ + INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */ + ENABLE_CF8_EXT_CFG = 46 /* EnableCf8ExtCfg - enable CF8 extended configuration cycles */ + +MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */ + CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */ + SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */ + MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */ + MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */ + MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */ + MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */ + +PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */ + PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */ + PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */ + CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */ + CONFIG_EVENT_H = 4 /* Increment count by number of event */ + /* occured in clock cycle */ + EVENT_ENABLE = 22 /* Enable the event */ +PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */ + +FUNC_3 = 3 +MCA_NB_CFG = 0x44 /* MCA NB Configuration */ +CPU_ERR_DIS = 6 /* CPU error response disable */ +PRODUCT_INFO_REG1 = 0x1FC /* Product Information Register 1 */ + +# Local use flags, in upper most byte if ESI +FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized +FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack +FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit +FLAG_CORE_NOT_IDENTIFIED = 27 # Signals that the cores/compute units of the installed processor is not recognized +FLAG_FORCE_32K_STACK = 28 # Signals that to force 32KB stack size for BSP core +CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW)) +MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN)) + +/**************************************************************************** + * + * CPU MACROS - PUBLIC + * + ****************************************************************************/ +.macro _WRMSR + .byte 0x0f, 0x30 +.endm + +.macro _RDMSR + .byte 0x0F, 0x32 +.endm + +.macro AMD_CPUID arg0 + .ifb \arg0 + mov $0x1, %eax + .byte 0x0F, 0x0A2 /* Execute instruction */ + bswap %eax + xchg %ah, %al /* Ext model in al now */ + rol $0x08, %eax /* Ext model in ah, model in al */ + and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */ + .else + mov \arg0, %eax + .byte 0x0F, 0x0A2 + .endif +.endm + +.macro MAKE_EXT_PCI_ADDR Seg, Bus, Dev, Func, Offset + mov $(1 << 31 | (Seg) << 28 | (((Offset) & (0x0F00)) >> 8) << 24 | (Bus) << 16 | (Dev) << 11 | (Func) << 8) | ((Offset) & (0xFC)), %eax +.endm +/**************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK + +// AMD_ENABLE_STACK_FAMILY_HOOK_F10 +// AMD_ENABLE_STACK_FAMILY_HOOK_F12 + AMD_ENABLE_STACK_FAMILY_HOOK_F14 + AMD_ENABLE_STACK_FAMILY_HOOK_F15 +.endm + +/**************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK + + //AMD_DISABLE_STACK_FAMILY_HOOK_F10 + //AMD_DISABLE_STACK_FAMILY_HOOK_F12 + AMD_DISABLE_STACK_FAMILY_HOOK_F14 + AMD_DISABLE_STACK_FAMILY_HOOK_F15 + +.endm + +/**************************************************************************** +* +* GET_NODE_ID_CORE_ID Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI[7:0] = Core# (0..N, relative to node) +* SI[15:8]= Node# (0..N) +* SI[23:16]= reserved +* SI[24]= flag: 1=Family Unrecognized +* SI[25]= flag: 1=Interface re-entry call +* SI[26]= flag: 1=Core is primary of compute unit +* SI[31:27]= reserved, =0 +****************************************************************************/ +.macro GET_NODE_ID_CORE_ID + LOCAL node_core_exit + + mov $-1, %si + //GET_NODE_ID_CORE_ID_F10 + //GET_NODE_ID_CORE_ID_F12 + //GET_NODE_ID_CORE_ID_F14 + GET_NODE_ID_CORE_ID_F15 + /* + * Check for unrecognized Family + */ + cmp $-1, %si # Has family (node/core) already been discovered? + jnz node_core_exit # Br if yes + + mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue + + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jc node_core_exit # Br if yes + hlt # Kill APs +node_core_exit: + +.endm + +/**************************************************************************** +## Family 10h MACROS +##*************************************************************************** +#--------------------------------------------------- +# +# AMD_ENABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless +# +# Set any family specific controls needed to enable the use of +# cache as general storage before main memory is available. +# +# Inputs: +# ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +# Outputs: +# none +# +# Family 10h requirements (BKDG section 2.3.3): +# * Paging disabled +# * MSRC001_0015[INVDWBINVD]=0 +# * MSRC001_1021[DIS_IND]=1 +# * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 +# * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 +# * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1 +# * MSRC001_1022[DIS_HW_PF]=1 +# * MSRC001_102A[IcDisSpecTlbWr]=1 +# * MSRC001_102A[ClLinesToNbDis]=1 +# * No INVD or WBINVD, no exceptions, page faults or interrupts +****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F10 + LOCAL fam10_enable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + shr $20, %eax # AL = cpu extended family + cmp $0x01, %al # Is this family 10h? + jnz fam10_enable_stack_hook_exit # Br if no + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + bts $DC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative DTLB reloads bit + bts $DIS_CLR_WBTOL2_SMC_HIT, %eax # Turn on Disable the self modifying code check buffer bit + bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit + _WRMSR + + dec %cx # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative TLB reloads bit + bts $DIS_IND, %eax # Turn on Disable indirect branch predictor + _WRMSR + + mov $BU_CFG2, %ecx # MSR C001_102A + _RDMSR + bts $F10_CL_LINES_TO_NB_DIS, %eax # Allow BIOS ROM to be cached in the IC + bts $(IC_DIS_SPEC_TLB_WR-32), %edx #Disable speculative writes to the ITLB + _WRMSR + + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + bt $FLAG_STACK_REENTRY, %esi # Check if stack has already been set + jc fam10_skipClearingBit4 + btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion + _WRMSR + +fam10_skipClearingBit4: + mov %esi, %eax # load core# + or %al, %al # If (BSP) + jne fam10_enable_stack_hook_exit + mov $PERF_COUNTER3, %ecx # Select performance counter three + # to count number of CAR evictions + xor %eax, %eax # Initialize the lower part of the counter to zero + xor %edx, %edx # Initializa the upper part of the counter to zero + _WRMSR # Save it + mov $PERF_CONTROL3, %ecx # Select the event control three + _RDMSR # Get the current setting + and $PERF_CONTROL3_RESERVE_L, %eax # Preserve the reserved bits + or $CONFIG_EVENT_L, %eax # Set the lower part of event register to + # select CAR Corruption occurred by any cores + and $PERF_CONTROL3_RESERVE_H, %dx # Preserve the reserved bits + or $CONFIG_EVENT_H, %dx # Set the upper part of event register + _WRMSR # Save it + bts $EVENT_ENABLE, %eax # Enable it + _WRMSR # Save it + +fam10_enable_stack_hook_exit: +.endm + +/***************************************************************************** +** Family 14h MACROS +*****************************************************************************/ +/***************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +* Outputs: +* none +* +* Family 14h requirements (BKDG section 2.3.3): +* * Paging must be disabled. +* * MSRC001_0015[INVD_WBINVD]=0. +* * MSRC001_1020[DisStreamSt]=1. +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1. Disable speculative ITLB reloads. +* * MSRC001_1022[DIS_HW_PF]=1. +* * No INVD or WBINVD, no exceptions, page faults or interrupts +*****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F14 + LOCAL fam14_enable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + shr $20, %eax # AL = cpu extended family + cmp $0x05, %al # Is this family 14h? + jnz fam14_enable_stack_hook_exit # Br if no + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + bts $DIS_HW_PF, %eax # Disable hardware prefetches + _WRMSR + + dec %cx #IC_CFG # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Disable speculative TLB reloads + _WRMSR + + dec %cx #LS_CFG # MSR:C001_1020 + _RDMSR + bts $DIS_STREAM_ST, %eax # Disabled Streaming store functionality + _WRMSR + + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + bt $FLAG_STACK_REENTRY, %esi # Check if stack has already been set + jc fam14_skipClearingBit4 + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR +fam14_skipClearingBit4: # Keeping this label + +fam14_enable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# +* Outputs: +* none +* +* Family 14h requirements: +* * INVD or WBINVD +* * MSRC001_0015[INVD_WBINVD]=1. +* * MSRC001_1020[DisStreamSt]=0. +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0. +* * MSRC001_1022[DIS_HW_PF]=0. +*****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK_F14 + LOCAL fam14_disable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + shr $20, %eax # AL = cpu extended family + cmp $0x05, %al # Is this family 14h? + jnz fam14_disable_stack_hook_exit # Br if no + + mov $LS_CFG, %ecx # MSR:C001_1020 + _RDMSR + btr $DIS_STREAM_ST, %eax # Turn on Streaming store functionality + _WRMSR + + inc %cx #IC_CFG # MSR:C001_1021 + _RDMSR + btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative DC-TLB reloads + _WRMSR + + inc %cx #DC_CFG # MSR:C001_1022 + _RDMSR + btr $DIS_HW_PF, %eax # Turn on hardware prefetches + _WRMSR + + #-------------------------------------------------------------------------- + # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. + #-------------------------------------------------------------------------- + + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR + invd # Clear the cache tag RAMs + bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD + _WRMSR + + #-------------------------------------------------------------------------- + # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. + #-------------------------------------------------------------------------- + +fam14_disable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* GET_NODE_ID_CORE_ID_F14 Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) +*****************************************************************************/ +.macro GET_NODE_ID_CORE_ID_F14 + + LOCAL node_core_f14_exit + + cmp $0x-1, %si # Has node/core already been discovered? + jnz node_core_f14_exit # Br if yes + + AMD_CPUID $CPUID_MODEL + shr $20, %eax # AL = cpu extended family + cmp $0x05, %al # Is this family 14h? + jnz node_core_f14_exit # Br if no + + xor %esi, %esi # Node must be 0 + bts $FLAG_IS_PRIMARY, %esi # all family 14h cores are primary + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jc node_core_f14_exit # Br if yes + inc %si # Set core to 1 +node_core_f14_exit: +.endm + +/***************************************************************************** +** Family 15h MACROS +*****************************************************************************/ +/***************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +* Outputs: +* none +* +* Family 15h requirements (BKDG #42301 section 2.3.3): +* * Paging must be disabled. +* * MSRC001_0015[INVD_WBINVD]=0 +* * MSRC001_1020[DisSS]=1 +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 +* * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 +* * MSRC001_1022[DisHwPf]=1 +* * No INVD or WBINVD, no exceptions, page faults or interrupts +*****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F15 + LOCAL fam15_enable_stack_hook_exit + GET_NODE_ID_CORE_ID + mov %esi, %eax + bt $FLAG_IS_PRIMARY, %eax # Is this a 2nd entry? + jnc 1f + MAKE_EXT_PCI_ADDR 0, 0, 24, FUNC_3, 0x44 //MCA_NB_CFG + mov $0xCF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + bts $CPU_ERR_DIS, %eax + out %eax, %dx +1: + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x06, %al # Is this family 15h? + jnz fam15_enable_stack_hook_exit # Br if no + + bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set + jc fam15_skipClearingBit4 + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion + _WRMSR + +fam15_skipClearingBit4: + mov $LS_CFG, %ecx # MSR:C001_1020 + _RDMSR + bts $DIS_SS, %eax # Turn on Streaming store functionality disabled bit + _WRMSR + + inc %ecx #IC_CFG # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit + _WRMSR + + //mov %ebx, %eax # Restore revision info to EAX + //shr $16, %eax + //and $0x0F, %al # AL = cpu extended model + + inc %ecx #DC_CFG # MSR:C001_1022 + _RDMSR + bts $DC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative DC-TLB reloads bit + bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit + _WRMSR # Remove KM in PI 1.1.0.0 + + mov %ebx, %eax # Restore revision info to EAX + shr $16, %eax + and $0xF, %al + #.if (al == 01h) Is this TN or KV? + cmp $1, %eax + jz 1f + cmp $3, %eax + jz 3f # Skip if it is KV, it is only for TN from Label 1 to 3 + jmp 2f +1: #.if (al == 01h) # TN only + #Enable MSRC001_001F[EnableCf8ExtCfg] + mov $NB_CFG, %ecx # MSR:C001_001F + _rdmsr + bts $(ENABLE_CF8_EXT_CFG - 32), %edx + _wrmsr + # Set F3x44[6, CpuErrDis] = 1 +// MAKE_EXT_PCI_ADDR 0, 0, 24, FUNC_3, 0x44 //MCA_NB_CFG + //mov $(1 << 31 | 2 << 28 | (((MCA_NB_CFG) & (0x0F00)) >> 8) << 24 | 2 << 16 | 1 << 11 | FUNC_3 << 8), %eax + +// mov $0xCF8, %dx +// out %eax, %dx +// add $4, %dx +// in %dx, %eax +// bts $CPU_ERR_DIS, %eax +// out %eax, %dx + +3: +// MAKE_EXT_PCI_ADDR 0, 0, 24, FUNC_3, 0x44 //MCA_NB_CFG +// mov $0xCF8, %dx +// out %eax, %dx +// add $4, %dx +// in %dx, %eax +// bts $CPU_ERR_DIS, %eax +// out %eax, %dx + + mov $CU_CFG, %ecx # TN or KV + _RDMSR + bt $L2_WAY_LOCK_EN, %eax + #.if (!carry?) + jc 2f + bts $L2_WAY_LOCK_EN, %eax + or $L2_FIRST_LOCKED_WAY_OR_MASK, %eax + _WRMSR + #.endif + #.endif +2: + mov %ebx, %eax # Restore revision info to EAX + xchg %ah, %al + shr $8, %eax + //and $0xF, %al + #.if (ax == 6100h) ; Is this TN-A0? + cmp $0x6100, %ax + jnz 2f + MAKE_EXT_PCI_ADDR 0, 0, 24, FUNC_3, PRODUCT_INFO_REG1 + mov $0xCF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + bt $21, %eax + jc 2f + mov $CU_CFG2, %ecx #MSR:C001_102A + _RDMSR + bts $8, %eax + _WRMSR + # .endif + +2: # Do Standard Family 15 work + + mov $CU_CFG3, %ecx # MSR:C001_102B + _RDMSR + btr $(COMBINE_CR0_CD - 32), %edx # Clear CombineCr0Cd bit + _WRMSR + +fam15_enable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# +* Outputs: +* none +* +* Family 15h requirements: +* * INVD or WBINVD +* * MSRC001_0015[INVD_WBINVD]=1 +* * MSRC001_1020[DisSS]=0 +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 +* * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 +* * MSRC001_1022[DIS_HW_PF]=0 +*****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK_F15 + LOCAL fam15_disable_stack_hook_exit + LOCAL fam15_disable_stack_remote_read_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x06, %al # Is this family 15h? + jnz fam15_disable_stack_hook_exit # Br if no + + mov %ebx, %edi # Save revision info to EDI + AMD_CPUID $AMD_CPUID_APIC + mov %cl, %al # AL = number of cores - 1 + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %bx + shl %cl, %bl # BL = theoretical number of cores on socket + dec %bx # BL = core number on socket mask + mov %bl, %ah # AH = core number on socket mask + mov %edi, %ebx # Restore revision info to EBX + mov %ax, %di # DI[15:8] = core number mask, DI[7:0] = number of cores - 1 + + and $0x0F00FF, %ebx + mov %ebx, %eax + shr $8, %eax + or %ax, %bx # Save Extended Model, Model and Stepping to BX + # [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping (bx=0000000000010100, ok) + + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR # dx=0 ax=fee00800 + mov %bx, %dx # Save Extended Model, Model and Stepping to DX + shl $16, %edx #EDX[31:16] = Extended Model, Model and Stepping + mov %eax ,%ebx # EBX = LAPIC base + xor %ecx ,%ecx # Zero out CU flags + bts $AMD_CU_NEED_TO_WAIT, %ecx # Default to waiting + bts $AMD_CU_SEND_INVD_MSG, %ecx # Default to signaling + mov %cr0, %eax + bt $CR0_PE, %ax # Are we in protected mode? + # .if (!carry?) + jc 1f + bts $AMD_CU_RESTORE_ES, %ecx # Indicate ES restore is required + mov %es, %cx # Save ES segment register to CX + xor %ax, %ax + mov %ax, %es # Set ES to big real mode selector for 4GB access + # .endif + +1: + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_ID_REG, %bl # + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %al, %ah # AH = APIC ID + mov %di, %dx # DH = core mask + and %dh, %ah # AH = core number # ax=111 dx=01000F03 + + # .if (zero?) + jnz 1f + # Core 0 of a socket + btr $AMD_CU_SEND_INVD_MSG, %ecx # No need to signal after INVD + #.if (dl != 0) + cmp $0, %dl + jz 2f + # This socket has multiple cores + and $0xf000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %edi + mov %edi, %es:(%ebx) # Signal for non core 0s to complete CAR breakdown + jmp 1f + #.else +2: btr $AMD_CU_NEED_TO_WAIT, %ecx # No need to wait on a single core CPU + #.endif + # .endif +1: + + bt $AMD_CU_NEED_TO_WAIT, %ecx #cx = c0000000 + #.if (carry?) + jnc 1f + #.if (ah == dl) + cmp %dl, %ah + jnz 2f + # This is the highest numbered core on this socket -- wait on core 0 + not %dh # Flip the mask to determine local core 0's APID ID + and %dh, %al # AL = target APIC ID # ax=310 + jmp 3f +2: #.else + # All other cores (including core 0) wait on the next highest core. + # In this way, cores will halt in a cascading fashion down to 0. + inc %al + #.endif +3: + shl $APIC20_APICID, %eax + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # Set target APIC ID + + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $CMD_REG_TO_READ_DATA, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam15_disable_stack_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam15_disable_stack_hook_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam15_disable_stack_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + +fam15_disable_stack_remote_read_exit: + rol $8, %ecx # Restore ECX + +1: #.endif + + bt $AMD_CU_RESTORE_ES, %ecx + #.if (carry?) + jnc 1f + mov %cx, %es +1: + mov %ecx, %edi + shr $16, %edx + mov %dx, %bx + + #Handshaking complete. Continue tearing down CAR. + + mov $LS_CFG, %ecx # MSR:C001_1020 + _RDMSR + btr $DIS_SS, %eax # Turn on Streaming store functionality + _WRMSR + + inc %ecx #IC_CFG # MSR:C001_1021 + _RDMSR + btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads + _WRMSR + + inc %ecx #DC_CFG # MSR:C001_1022 + _RDMSR + btr $DC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads + btr $DIS_HW_PF, %eax # Turn on hardware prefetches + _WRMSR + #-------------------------------------------------------------------------- + # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. + #-------------------------------------------------------------------------- + + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR + wbinvd # Clear the cache tag RAMs + #.if (bh == 01h) || (bh == 03h) ; Is this TN or KV? + cmp $01, %bh + jz 4f + cmp $03, %bh + jnz 1f +4: mov $CU_CFG, %ecx # MSR:C001_1023 + _RDMSR + shr $L2_FIRST_LOCKED_WAY, %eax + and $0x1F, %eax + #.if (eax == 01Fh) + cmp $0x1F, %eax #Check if way 15 of the L2 needs to be reserved + jnz 3f + _RDMSR + btr $L2_WAY_LOCK_EN, %eax + _WRMSR +3: #.endif + +1: #.endif + #Do Standard Family 15 work + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD + _WRMSR + #.endif # end + 0: +// +// #-------------------------------------------------------------------------- +// # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. +// #-------------------------------------------------------------------------- +// + mov $CU_CFG3, %ecx # MSR:C001_102B + _RDMSR + bts $(COMBINE_CR0_CD - 32), %edx # Set CombineCr0Cd bit + _WRMSR + + bt $AMD_CU_SEND_INVD_MSG, %edi + #.if (carry?) + jnc 1f + # Non core zero needs to signal to core 0 to proceed + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx # EBX = LAPIC base + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %eax + mov %eax, %es:(%ebx) # Signal for core 0 to complete CAR breakdown + +1: #.endif + +fam15_disable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* GET_NODE_ID_CORE_ID_F15 Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) +*****************************************************************************/ +.macro GET_NODE_ID_CORE_ID_F15 + + LOCAL node_core_f15_exit + LOCAL node_core_f15_AP + LOCAL node_core_f15_shared + LOCAL node_core_f15_AP_not_TN + +#define F15_L2Size 512 +#define F15_ShareCores 2 +#define F15_AllocMem 0 +#define F15_AllocExe 0 +#define F15_SzAddrBus 48 +#define F15_pad 0 + cmp $-1, %si # Has node/core already been discovered? + jnz node_core_f15_exit # Br if yes + + AMD_CPUID $CPUID_MODEL + shr $12, %eax # AL = cpu extended family + cmp $06, %ah # Is this family 15h? + jnz node_core_f15_exit # Br if no + shr $4, %al # AL = cpu extended model + shr $16, %ebx # BH = LocalApicId + mov %al, %bl # BL = cpu extended model + + # LoadTableAddress(FAM15H_INFO_STRUCT) + # movd mm5, eax # load pointer to Family Info Struc + + xor %esi, %esi # Assume BSC, clear local flags + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jnc node_core_f15_AP # Br if no + + # This is the BSP. + # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) + mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 + out %eax, %dx + jmp node_core_f15_shared # + +node_core_f15_AP: + mov %bl, %al # AL = cpu extended model + shr $8, %bx # BL = CPUID Fn0000_0001_EBX[LocalApicId] +// cmp $1, %al # Is This TN? +// jz 4f +// cmp $3, %al +// jnz node_core_f15_AP_not_TN +4: mov %bx, %si + jmp node_core_f15_shared + # + # This is an AP. Routing tables have been enabled by the HT Init process. + # Also, the MailBox register was set by the BSP during early init + # The Mailbox register content is formatted as follows: + # UINT32 Node:4; // The node id of Core's node. + # UINT32 Socket:4; // The socket of this Core's node. + # UINT32 Module:2; // The internal module number for Core's node. + # UINT32 ModuleType:2; // Single Module = 0, Multi-module = 1. + # UINT32 :20; // Reserved + # +node_core_f15_AP_not_TN: +// mov $0x0C0000408, %ecx # Read the family 15h mailbox +// _RDMSR # MC4_MISC1[63:32] +// mov %dx, %si # SI = raw mailbox contents (will extract node# from this) +// shr $24, %ebx # BL = CPUID Fn0000_0001_EBX[LocalApicId] +// mov %bx, %di # DI = Initial APIC ID (will extract core# from this) +// +// AMD_CPUID $AMD_CPUID_APIC # +// shr $4, %ch # CH = ApicIdSize, #bits in APIC ID that show core# +// inc %cl # CL = Number of enabled cores in the socket +// mov %cx, %bx +// +// mov $NB_CFG, %ecx +// _RDMSR # EDX has InitApicIdCpuIdLo bit +// +// mov %bh, %cl # CL = APIC ID size +// mov $1, %al # Convert APIC ID size to an AND mask +// shl %cl, %al # AL = 2^APIC ID size +// dec %al # AL = mask for relative core number +// xor %ah, %ah # AX = mask for relative core number +// bt $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1? +// #.if (!carry?) # Br if yes +// jc 0f +// mov $8, %ch # Calculate core number shift count +// sub %cl, %ch # CH = core shift count +// mov %ch, %cl +// shr %cl, %di # Right justify core number +// #.endif +// 0: +// and %ax, %di # DI = socket-relative core number +// +// mov %si, %cx # CX = raw mailbox value +// shr $10, %cx # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM) +// and $3, %cl # Isolate ModuleType +// xor %bh, %bh # BX = Number of enabled cores in the socket +// shr %cl, %bx # BX = Number of enabled cores per node +// xor %dx, %dx # Clear upper word for div +// mov %di, %ax # AX = socket-relative core number +// div %bx # DX = node-relative core number +// movzx %si, %eax # Prepare return value +// and $0x000F, %ax # AX = node number +// shl $8,%ax # [15:8]=node# +// mov %dl, %al # [7:0]=core# (relative to node) +// mov %eax, %esi # ESI = node-relative core number + + # + # determine if this core shares MTRRs + # +node_core_f15_shared: + mov $0x8000C580, %eax # Compute Unit Status + mov %si, %bx + shl $3, %bh # Move node# to PCI Dev# field + add %bh, %ah # Adjust for node number + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore + + # BL is MyCore# + mov $0x06, %cx # Use CH as 'first of pair' core# + #.while (cl > 0) + jmp 0f + 8: + bt $0, %eax # Is pair enabled? + #.if (carry?) # + jnc 1f + mov $0x01, %bh # flag core as primary + bt $16, %eax # Is there a 2nd in the pair? + #.if (carry?) # + jnc 4f + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + inc %ch + xor %bh, %bh # flag core as NOT primary + #.break .if (ch == bl) # Does 2nd match MyCore#? + cmp %bl, %ch + je 9f + jmp 2f + #.else # No 2nd core + 4: + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + #.endif + 2: + inc %ch + #.endif + 1: + shr $1, %eax + dec %cl + #.endw + 0: + #.if (cl == 0) + cmp $0x0, %cl + ja 8b + 9: + or %cl, %cl + jne 1f + #Error - core# didn't match Compute Unit Status content + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns + #.endif + 1: + #.if (bh != 0) # Check state of primary for the matched core + or %bh, %bh + je 2f + bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value + #.endif + 2: + +node_core_f15_exit: + +.endm + +/***************************************************************************** +* AMD_ENABLE_STACK: Setup a stack +* +* In: +* EBX = Return address (preserved) +* +* Out: +* SS:ESP - Our new private stack location +* +* EAX = AGESA_STATUS +* +* ECX = Stack size in bytes +* +* Requirements: +* * This routine presently is limited to a max of 64 processor cores +* Preserved: +* ebx ebp +* Destroyed: +* eax, ecx, edx, edi, esi, ds, es, ss, esp +* mmx0, mmx1 +* +* Description: +* Fixed MTRR address allocation to cores: +* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. +* There is a max of 1 BSP, 7 core0s and 56 other cores. +* Although each core has it's own cache storage, they share the address space. Each core must +* be assigned a private and unique address space for its stack. To support legacy systems, +* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved +* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) +* +* 80000h 40000h 00000h +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* 64K | | | | | | | | | 64K ea +* ea +----------+----------+----------+----------+----------+----------+----------+----------+ +* | MTRR 0000_0250 MTRRfix64K_00000 | +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node +* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* +* C0000h B0000h A0000h 90000h 80000h +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +*16K | | | | | | | | | | | | | | | | | +* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node +* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* +* E0000h D0000h C0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* +* 100000h F0000h E0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +*****************************************************************************/ +.macro AMD_ENABLE_STACK + +# These are local labels. Declared so linker doesn't cause 'redefined label' errors + LOCAL SetupStack + LOCAL Real16bMode + LOCAL Protected32Mode + LOCAL ClearTheStack + +# Note that SS:ESP will be default stack. Note that this stack +# routine will not be used after memory has been initialized. Because +# of its limited lifetime, it will not conflict with typical PCI devices. + movd %ebx, %mm0 # Put return address in a safe place + movd %ebp, %mm1 # Save some other user registers + + # get node id and core id of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node) + # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established + + # determine if stack is already enabled. We are using the DefType MSR for this determination. + # It is =0 after reset; CAR setup sets it to enable the MTRRs + mov %cr0, %eax + test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits) + jnz SetupStack # Jump if yes + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR + test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) + jz SetupStack # Jump if no + or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized + +SetupStack: + # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM + mov %esi, %ebx # Get my Node/Core info + xor %bl, %bl + shl $3, %bh # Isolate my node#, match alignment for PCI Dev# + mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit + add %bh, %ah + mov %eax, %ebx # Save PCI address for Base/Limit pair + + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) + out %eax, %dx # DRAM Limit = node0, no interleave + + mov %ebx, %eax + sub $4, %eax # Now point to the Base register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + mov $0x00000003, %eax # Set the read and write enable bits + out %eax, %dx # DRAM Base = 0x0000, R/W + + AMD_ENABLE_STACK_FAMILY_HOOK + + # Init CPU MSRs for our init routines + mov $MTRR_SYS_CFG, %ecx # SYS_CFG + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit + _WRMSR + + mov %esi, %eax + bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry? + #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP + jc 0f + bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit? + #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset + # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores + # Clear all variable and Fixed MTRRs for non-shared cores + jnc 0f + mov $AMD_MTRR_VARIABLE_BASE0, %ecx + xor %eax, %eax + xor %edx, %edx + #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n] + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x10, %cl + jne 2b + mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250 + _WRMSR + mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258 + _WRMSR + mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259 + _WRMSR + mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 + #.while (cl != 70h) + jmp 3f + 4: + _WRMSR + inc %cl + #.endw + 3: + cmp $0x70, %cl + jne 4b + # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. + # - not strictly needed since the FixedMTRRs take presedence. + mov $(16 * 1024 * 1024), %eax + mov $TOP_MEM, %ecx # MSR:C001_001A + _WRMSR + #.endif # End Is_Primary + #.endif # End Stack_ReEntry + 0: + # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores + xor %eax, %eax + xor %edx, %edx + mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019 + #.while (cl != 1Ah) + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x1A, %cl + jne 2b + mov $TOP_MEM2, %ecx # MSR:C001_001D + _WRMSR + + # setup MTTRs for stacks + # A speculative read can be generated by a speculative fetch mis-aligned in a code zone + # or due to a data zone being interpreted as code. When a speculative read occurs outside a + # controlled region (intentionally used by software), it could cause an unwanted cache eviction. + # To prevent speculative reads from causing an eviction, the unused cache ranges are set + # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. + # Note: some core stack regions will share an MTRR since the control granularity is much + # larger than the allocated stack zone. The allocation algorithm must account for this 'extra' + # space covered by the MTRR when parseling out cache space for the various uses. In some cases + # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c + # + # Outcome of this block is that: (Note the MTRR map at the top of the file) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) + # + + mov %si, %ax # Load node, core + #.if (al == 0) # Is a core 0? + or %al, %al + jne 1f + #.if (ah == 0) # Is Node 0? (BSP) + or %ah, %ah + jne 2f + # Is BSP, assign a 64K stack + mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE >> 12)), %ebx + mov $BSP_STACK_BASE_ADDR, %ebp + jmp 0f + #.else # node 1 to 7, core0 + 2: + # Is a Core0 of secondary node, assign 16K stacks + mov $AMD_MTRR_FIX16k_80000, %bx + shl $16, %ebx # + mov %ah, %bh # Node# is used as slot# + mov $(CORE0_STACK_SIZE >> 12), %bl + mov %ah, %al # Base = (Node# * Size)# + mul %bl # + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE0_STACK_BASE_ADDR, %eax + mov %eax, %ebp + #.endif + jmp 0f + #.else #core 1 thru core 7 + 1: + # Is core 1-7 of any node, assign 4K stacks + mov $8, %al # CoreIndex = ( (Node# * 8) ... + mul %ah # + mov %si, %bx # + add %bl, %al # ... + Core#)# + + mov $AMD_MTRR_FIX64k_00000, %bx + shl $16, %ebx # + mov %al, %bh # Slot# = (CoreIndex / 16) + 4# + shr $4, %bh # + add $4, %bh # + mov $(CORE1_STACK_SIZE >> 12), %bl + + mul %bl # Base = ( (CoreIndex * Size) ... + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)# + mov %eax, %ebp + #.endif + 0: + + # Now set the MTRR. Add this to already existing settings (don't clear any MTRR) + mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot + mov %bh, %cl # ShiftCount = ((slot# ... + and $0x03, %cl # ... % 4) ... + shl $0x03, %cl # ... * 8)# + shl %cl, %edi # Cache type is now in correct position + ror $16, %ebx # Get the MTRR address + movzx %bx, %ecx # + rol $16, %ebx # Put slot# & size back in BX + _RDMSR # Read-modify-write the MSR + #.if (bh < 4) # Is value in lower or upper half of MSR? + cmp $4, %bh + jae 1f + or %edi, %eax # + jmp 0f + #.else + 1: # + or %edi, %edx # + #.endif # + 0: + _WRMSR # + + # Enable MTRR defaults as UC type + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR # Read-modify-write the MSR + bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn + bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn + _WRMSR + + # Close the modification window on the Fixed MTRRs + mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn + bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit + _WRMSR + + # Enable caching in CR0 + mov %cr0, %eax # Enable WT/WB cache + btr $CR0_PG, %eax # Make sure paging is disabled + btr $CR0_CD, %eax # Clear CR0 NW and CD + btr $CR0_NW, %eax + mov %eax, %cr0 + + # Use the Stack Base & size to calculate SS and ESP values + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # + mov %ebp, %esp # Initialize the stack pointer + mov %esp, %edi # Copy the stack start to edi + movzx %bl, %bx + movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore + shl $12, %ebx # Make size full byte count (* 4K) + add %ebx, %esp # Set the Stack Pointer as full linear address + sub $4, %esp + mov %esp,%ebp + # + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - 32b start address of stack block + # ebx - size of stack block + # esp - 32b linear stack pointer + # + + # Determine mode for SS base; + mov %cr0, %ecx # Check for 32-bit protect mode + bt $CR0_PE, %ecx # + #.if (!carry?) # PE=0 means real mode + jc Protected32Mode + mov %cs, %cx # PE=1 + cmp $0x0D000, %cx # Check for CS + jb Protected32Mode # If CS < D000, it is a selector instead of a segment + # alter SS:ESP for 16b Real Mode: +Real16bMode: + mov %edi, %eax + shr $4, %eax # Create a Real Mode segment for ss, ds, es + mov %ax, %ss + mov %ax, %ds + mov %ax, %es + shl $4, %eax + sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode + mov %ebx, %esp # Make SP an offset from SS + sub $4, %esp # + mov %esp,%ebp + # .endif # endif + # #else + # Default is to use Protected 32b Mode + #.endif + ; +Protected32Mode: + # + # Clear The Stack + # Now that we have set the location and the MTRRs, initialize the cache by + # reading then writing to zero all of the stack area. + # review: + # ss - Stack base + # esp - stack pointer + # ebx - size of stack block + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - address of start of stack block + # + +ClearTheStack: # Stack base is in SS, stack pointer is in ESP + shr $2, %ebx # ebx = stack block size in dwords + mov %bx, %cx # + # Check our flags - Don't clear an existing stack + #.if ( !(esi & 0FF000000h)) # Check our flags + test $(1 << FLAG_STACK_REENTRY), %esi + jne 1f + cld + mov %edi, %esi + rep lodsl (%esi) # Pre-load the range + xor %eax, %eax + mov %bx, %cx + mov %edi, %esi # Preserve base for push on stack + rep stosl (%edi) # Clear the range + movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword + shl $2, %ebx # Put stack size and base + push %ebx # in top of stack + push %esi + + mov %ebx, %ecx # Return size of stack in bytes + xor %eax, %eax # eax = 0 : no error return code + jmp 0f + #.else + 1: + movzx %cx, %ecx + shl $2, %ecx # Return size of stack in bytes + mov %esi, %eax + shr $24, %eax # Keep the flags as part of the error report + or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up) + #.endif + 0: + + movd %mm0, %ebx # Restore return address + movd %mm1, %ebp +.endm + +/***************************************************************************** +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP +* +* In: +* none +* +* Out: +* EAX = AGESA_SUCCESS +* +* Preserved: +* ebx +* Destroyed: +* eax, ecx, edx, esp +*****************************************************************************/ +.macro AMD_DISABLE_STACK + + mov %ebx, %esp # Save return address + + # get node/core/flags of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) + + # Turn on modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications + _WRMSR + + # Set lower 640K MTRRs for Write-Back memory caching + mov $AMD_MTRR_FIX64k_00000, %ecx + mov $0x1E1E1E1E, %eax + mov %eax, %edx + _WRMSR # 0 - 512K = WB Mem + mov $AMD_MTRR_FIX16k_80000, %ecx + _WRMSR # 512K - 640K = WB Mem + + # Turn off modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification + _WRMSR + + AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations + + mov %esp, %ebx + xor %eax, %eax + +.endm + diff --git a/src/vendorcode/amd/pi/00660F01/AGESA.h b/src/vendorcode/amd/pi/00660F01/AGESA.h new file mode 100644 index 0000000000..17205b1aaa --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/AGESA.h @@ -0,0 +1,3889 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 314282 $ @e \$Date: 2015-03-08 04:44:40 -0500 (Sun, 08 Mar 2015) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AGESA_H_ +#define _AGESA_H_ + +#include "Porting.h" +#include "AMD.h" + +// +// +// AGESA Types and Definitions +// +// + +// AGESA BASIC CALLOUTS +#define AGESA_MEM_RELEASE 0x00028000ul + +// AGESA ADVANCED CALLOUTS, Processor +#define AGESA_CHECK_UMA 0x00028100ul +#define AGESA_DO_RESET 0x00028101ul +#define AGESA_ALLOCATE_BUFFER 0x00028102ul +#define AGESA_DEALLOCATE_BUFFER 0x00028103ul +#define AGESA_LOCATE_BUFFER 0x00028104ul +#define AGESA_RUNFUNC_ONAP 0x00028105ul +#define AGESA_RUNFUNC_ON_ALL_APS 0x00028106ul +#define AGESA_IDLE_AN_AP 0x00028107ul +#define AGESA_WAIT_FOR_ALL_APS 0x00028108ul + +// AGESA ADVANCED CALLOUTS, Memory +#define AGESA_READ_SPD 0x00028140ul +#define AGESA_HOOKBEFORE_DRAM_INIT 0x00028141ul +#define AGESA_HOOKBEFORE_DQS_TRAINING 0x00028142ul +#define AGESA_READ_SPD_RECOVERY 0x00028143ul +#define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144ul +#define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY 0x00028145ul +#define AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE 0x00028146ul +#define AGESA_EXTERNAL_VOLTAGE_ADJUST 0x00028147ul + +// AGESA IDS CALLOUTS +#define AGESA_GET_IDS_INIT_DATA 0x00028200ul + +// AGESA GNB CALLOUTS +#define AGESA_GNB_PCIE_SLOT_RESET 0x00028301ul +#define AGESA_GNB_GFX_GET_VBIOS_IMAGE 0x00028302ul +#define AGESA_GNB_PCIE_CLK_REQ 0x00028303ul + +// AGESA FCH CALLOUTS +#define AGESA_FCH_OEM_CALLOUT 0x00028401ul + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +// +//----------------------------------------------------------------------------- + +/// Configuration values for SdConfig +typedef enum { + SdDisable = 0, ///< Disabled + SdVer2, ///< Version 2.0 + SdVer3, ///< Version 3.0 + SdV3SDR50, ///< V3 SdSDR50 + SdV3SDR104, ///< V3 SdSDR104 + SdV3DDR50, ///< V3 SdDDR50 + SdDump ///< SD DUMP, don't touch SD +} SD_MODE; + +/// Configuration values for SdClockControl +typedef enum { + Sd50MhzTraceCableLengthWithinSixInches = 4, ///< 50Mhz, default + Sd40MhzTraceCableLengthSix2ElevenInches = 6, ///< 40Mhz + Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7, ///< 25Mhz +} SD_CLOCK_CONTROL; + +/// Configuration values for AzaliaController +typedef enum { + AzAuto = 0, ///< Auto - Detect Azalia controller automatically + AzDisable, ///< Diable - Disable Azalia controller + AzEnable ///< Enable - Enable Azalia controller +} HDA_CONFIG; + +/// Configuration values for IrConfig +typedef enum { + IrDisable = 0, ///< Disable + IrRxTx0 = 1, ///< Rx and Tx0 + IrRxTx1 = 2, ///< Rx and Tx1 + IrRxTx0Tx1 = 3 ///< Rx and both Tx0,Tx1 +} IR_CONFIG; + +/// Configuration values for SataClass +typedef enum { + SataNativeIde = 0, ///< Native IDE mode + SataRaid, ///< RAID mode + SataAhci, ///< AHCI mode + SataLegacyIde, ///< Legacy IDE mode + SataIde2Ahci, ///< IDE->AHCI mode + SataAhci7804, ///< AHCI mode as 7804 ID (AMD driver) + SataIde2Ahci7804 ///< IDE->AHCI mode as 7804 ID (AMD driver) +} SATA_CLASS; + +/// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG +typedef enum { + PortA4 = 0, ///< 4:0:0:0 + PortA2B2 = 2, ///< 2:2:0:0 + PortA2B1C1 = 3, ///< 2:1:1:0 + PortA1B1C1D1 = 4 ///< 1:1:1:1 +} GPP_LINKMODE; + +/// Configuration values for FchPowerFail +typedef enum { + AlwaysOff = 0, ///< Always power off after power resumes + AlwaysOn = 1, ///< Always power on after power resumes + UsePrevious = 3, ///< Resume to same setting when power fails +} POWER_FAIL; + + +/// Configuration values for SATA Link Speed +typedef enum { + Gen1 = 1, ///< SATA port GEN1 speed + Gen2 = 2, ///< SATA port GEN2 speed + Gen3 = 3, ///< SATA port GEN3 speed +} SATA_SPEED; + + +/// Configuration values for GPIO function +typedef enum { + Function0 = 0, ///< GPIO Function 1 + Function1 = 1, ///< GPIO Function 1 + Function2 = 2, ///< GPIO Function 2 + Function3 = 3, ///< GPIO Function 3 +} GPIO_FUN; + +/// Configuration values for memory phy voltage (VDDR) +#define VOLT0_95 0 ///< VDDR 0.95V +#define VOLT1_05 1 ///< VDDR 1.05V +#define MAX_VDDR 2 ///< Maxmum value for this enum definition + +/// Configuration values for GPIO_CFG +typedef enum { + OwnedByEc = 1 << 0, ///< This bit can only be written by EC + OwnedByHost = 1 << 1, ///< This bit can only be written by host (BIOS) + Sticky = 1 << 2, ///< If set, [6:3] are sticky + PullUpB = 1 << 3, ///< 0: Pullup enable; 1: Pullup disabled + PullDown = 1 << 4, ///< 0: Pulldown disabled; 1: Pulldown enable + GpioOutEnB = 1 << 5, ///< 0: Output enable; 1: Output disable + GpioOut = 1 << 6, ///< Output state when GpioOutEnB is 0 + GpioIn = 1 << 7, ///< This bit is read only - current pin state +} CFG_BYTE; + +/// Configuration values for GPIO_CFG2 +typedef enum { + DrvStrengthSel_4mA = 0 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_8mA = 1 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_12mA = 2 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_16mA = 3 << 1, ///< 18:17 DrvStrengthSel. + PullUpSel_8K = 1 << 3, ///< 19 PullUpSel. Read-write. 0=4 K pull-up is selected. 1=8 K pull-up is selected. + PullUpEnable = 1 << 4, ///< 20 PullUpEnable. Read-write. 0=Pull-up is disabled on the pin. 1=Pull-up is enabled on the pin. + PullDownEnable = 1 << 5, ///< 21 PullDownEnable. Read-write. 0=Pull-down is disabled on the pin. 1=Pull-down is enabled on thepin. + OutputValue = 1 << 6, ///< 22 OutputValue. Read-write. 0=low. 1=high. + OutputEnable = 1 << 7, ///< 23 OutputEnable. Read-write. 0=Output is disabled on the pin. 1=Output is enabled on the pin. +} CFG2_BYTE; + +/// FCH GPIO CONTROL +typedef struct { + IN UINT8 GpioPin; ///< Gpio Pin, valid range: 0-67, 128-150, 160-228 + IN GPIO_FUN PinFunction; ///< Multi-function selection + IN CFG_BYTE CfgByte; ///< GPIO Register value +} GPIO_CONTROL; + +/// +/// FCH SCI MAP CONTROL +/// +typedef struct { + IN UINT8 InputPin; ///< Input Pin, valid range 0-63 + IN UINT8 GpeMap; ///< Gpe Map, valid range 0-31 +} SCI_MAP_CONTROL; + +/// +/// FCH SATA PHY CONTROL +/// +typedef struct { + IN BOOLEAN CommonPhy; ///< Common PHY or not + ///< @li <b>FALSE</b> - Only applied to specified port + ///< @li <b>TRUE</b> - Apply to all SATA ports + IN SATA_SPEED Gen; ///< SATA speed + IN UINT8 Port; ///< Port number, valid range: 0-7 + IN UINT32 PhyData; ///< SATA PHY data, valid range: 0-0xFFFFFFFF +} SATA_PHY_CONTROL; + +/// +/// FCH Component Data Structure in InitReset stage +/// +typedef struct { + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN BOOLEAN Xhci0Enable; ///< XHCI0 controller function + ///< @li <b>FALSE</b> - XHCI0 controller disabled + ///< @li <b>TRUE</b> - XHCI0 controller enabled + + IN BOOLEAN Xhci1Enable; ///< XHCI1 controller function + ///< @li <b>FALSE</b> - XHCI1 controller disabled + ///< @li <b>TRUE</b> - XHCI1 controller enabled +} FCH_RESET_INTERFACE; + + +/// +/// FCH Component Data Structure from InitEnv stage +/// +typedef struct { + IN SD_MODE SdConfig; ///< Secure Digital (SD) controller mode + IN HDA_CONFIG AzaliaController; ///< Azalia HD Audio Controller + + IN IR_CONFIG IrConfig; ///< Infrared (IR) Configuration + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN SATA_CLASS SataClass; ///< SATA controller mode + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN SataIdeMode; ///< Native mode of SATA IDE controller + ///< @li <b>FALSE</b> - Legacy IDE mode + ///< @li <b>TRUE</b> - Native IDE mode + + IN BOOLEAN Ohci1Enable; ///< OHCI controller #1 Function + ///< @li <b>FALSE</b> - OHCI1 is disabled + ///< @li <b>TRUE</b> - OHCI1 is enabled + + IN BOOLEAN Ohci2Enable; ///< OHCI controller #2 Function + ///< @li <b>FALSE</b> - OHCI2 is disabled + ///< @li <b>TRUE</b> - OHCI2 is enabled + + IN BOOLEAN Ohci3Enable; ///< OHCI controller #3 Function + ///< @li <b>FALSE</b> - OHCI3 is disabled + ///< @li <b>TRUE</b> - OHCI3 is enabled + + IN BOOLEAN Ohci4Enable; ///< OHCI controller #4 Function + ///< @li <b>FALSE</b> - OHCI4 is disabled + ///< @li <b>TRUE</b> - OHCI4 is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN POWER_FAIL FchPowerFail; ///< FCH power failure option +} FCH_INTERFACE; + + +/*---------------------------------------------------------------------------- + * CPU Feature related info + *---------------------------------------------------------------------------- + */ +/// Build Configuration values for BLDCFG_PLATFORM_CONNECTED_STANDBY_MODE +typedef enum { + ConnectedStandbyAuto = 0, ///< Auto + ConnectedStandbyDisabled = 1, ///< Disabled + MaxConnectedStandbyMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CONNECTED_STANDBY_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE +typedef enum { + CStateModeDisabled = 0, ///< Disabled + CStateModeC6 = 1, ///< C6 State + MaxCStateMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CSTATE_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE +typedef enum { + CpbModeAuto = 0, ///< Auto + CpbModeDisabled = 1, ///< Disabled + MaxCpbMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CPB_MODES; + + +/// Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY +#define PsdPolicyProcessorDefault 0 ///< PSD is dependent or independent per processor default +#define PsdPolicyDependent 1 ///< PSD is forced dependent +#define PsdPolicyIndependent 2 ///< PSD is forced independent +#define PsdPolicyMax 3 ///< Not a valid value, used for verifying input + +/*---------------------------------------------------------------------------- + * GNB PCIe configuration info + *---------------------------------------------------------------------------- + */ + +// Event definitions + +#define GNB_EVENT_INVALID_CONFIGURATION 0x20010000ul // User configuration invalid +#define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001ul // Requested lane allocation for PCIe port can not be supported +#define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION 0x20010002ul // Requested incorrect PCIe port device address +#define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION 0x20010003ul // Incorrect parameter in DDI link configuration +#define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION 0x20010004ul // Invalid with for PCIe port or DDI link +#define GNB_EVENT_INVALID_LANES_CONFIGURATION 0x20010005ul // Lane double subscribe lanes +#define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION 0x20010006ul // Requested lane allocation for DDI link(s) can not be supported +#define GNB_EVENT_LINK_TRAINING_FAIL 0x20020000ul // PCIe Link training fail +#define GNB_EVENT_BROKEN_LANE_RECOVERY 0x20030000ul // Broken lane workaround applied to recover link training +#define GNB_EVENT_GEN2_SUPPORT_RECOVERY 0x20040000ul // Scale back to GEN1 to recover link training + + +#define DESCRIPTOR_TERMINATE_LIST 0x80000000ull +#define DESCRIPTOR_IGNORE 0x40000000ull + +/// PCIe link initialization +typedef enum { + EndpointDetect = 0, ///< Detect endpoint presence + EndpointNotPresent ///< Endpoint not present (or connected). Used in case there is alternative way to determine + ///< if device present on board or in slot. For example GPIO can be used to determine device presence. +} PCIE_ENDPOINT_STATUS; + + +/// PCIe port misc extended controls +typedef struct { + IN UINT8 LinkComplianceMode :1; ///< Force port into compliance mode (device will not be trained, port output compliance pattern) + IN UINT8 LinkSafeMode :2; /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability) + * @li @b 0 - port can advertize muximum supported capability + * @li @b 1 - port limit advertized capability and speed to PCIe Gen1 + */ + IN UINT8 SbLink :1; /**< PCIe link type + * @li @b 0 - General purpose port + * @li @b 1 - Port connected to SB + */ + IN UINT8 ClkPmSupport :1; /**< Clock Power Management Support + * @li @b 0 - Clock Power Management not configured + * @li @b 1 - Clock Power Management configured according to PCIe device capability + */ +} PCIe_PORT_MISC_CONTROL; + +/// The IO APIC Interrupt Mapping Info +typedef struct { + IN UINT8 GroupMap; /**< Group mapping for slot or endpoint device (connected to PCIE port) interrupts . + * @li <b>0</b> - IGNORE THIS STRUCTURE AND USE RECOMMENDED SETTINGS + * @li <b>1</b> - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) + * @li <b>2</b> - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) + * @li ... + * @li <b>8</b> - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) + */ + IN UINT8 Swizzle; /**< Swizzle interrupt in the Group. + * @li <b>0</b> - ABCD + * @li <b>1</b> - BCDA + * @li <b>2</b> - CDAB + * @li <b>3</b> - DABC + */ + IN UINT8 BridgeInt; /**< IOAPIC redirection table entry for PCIE bridge interrupt + * @li <b>0</b> - Entry 0 of IO APIC redirection table + * @li <b>1</b> - Entry 1 of IO APIC redirection table + * @li ... + * @li <b>31</b> - Entry 31 of IO APIC redirection table + */ +} APIC_DEVICE_INFO; + +/// Initial Offset Calibration Control +typedef enum { + ADAPT_IOC_DISABLED = 0, ///< Initial Offset Calibration Disabled + ADAPT_IOC_ENABLED ///< Initial Offset Calibration Enabled +} ADAPT_IOC_CONTROL; + +/// DFE Control values +typedef enum { + ADAPT_DFE_CONTROL_DISABLED = 0, ///< DFE Disabled + ADAPD_DFE_CONTROL_1TAP_DFE = 4, ///< 1-tap DFE + ADAPD_DFE_CONTROL_1TAP_DFE_FBF, ///< 1-tap DFE with Future Bit Filtering + ADAPD_DFE_CONTROL_2TAP_DFE, ///< 2-tap DFE + ADAPD_DFE_CONTROL_2TAP_DFE_FBF ///< 2-tap DFE with Future Bit Filtering +} ADAPT_DFE_CONTROL; + +/// LEQ Control values +typedef enum { + ADAPT_LEQ_CONTROL_DISABLED = 0, ///< LEQ Disabled + ADAPT_LEQ_CONTROL_DC_GAIN = 2, ///< DC Gain Adaptation + ADAPT_LEQ_CONTROL_DC_GAIN_POLE ///< DC Gain and Pole Adaptation +} ADAPT_LEQ_CONTROL; + +/// Dynamic Offset Calibration Control +typedef enum { + ADAPT_DOC_DISABLED = 0, ///< Dynamic Offset Calibration Disabled + ADAPT_DOC_ENABLED ///< Dynamic Offset Calibration Enabled +} ADAPT_DOC_CONTROL; + +/// FOM Calculation Control +typedef enum { + ADAPT_FOMC_DISABLED = 0, ///< FOM Calculation Disabled + ADAPT_FOMC_ENABLED ///< FOM Calculation Enabled +} ADAPT_FOMC_CONTROL; + +/// PI Offset Calibration Control +typedef enum { + ADAPT_PIOC_DISABLED = 0, ///< PI Offset Calibration Disabled + ADAPT_PIOC_ENABLED ///< PI Offset Calibration Enabled +} ADAPT_PIOC_CONTROL; + +/// GEN3 RxAdaptMode Configuration Structure +typedef struct { + IN BOOLEAN InitOffsetCancellation; ///< Initial Offset Cancellation Enable + IN UINT8 DFEControl; ///< DFE Control + IN UINT8 LEQControl; ///< LEQ Control + IN BOOLEAN DynamicOffsetCalibration; ///< Dynamic Offset Calibration Enable + IN BOOLEAN FOMCalculation; ///< FOM Calculation Enable + IN BOOLEAN PIOffsetCalibration; ///< PI Offset Calibratino Enable +} RX_ADAPT_MODE; + +/// PCIe port configuration data +typedef struct { + IN UINT8 PortPresent; ///< Enable PCIe port for initialization. + IN UINT8 ChannelType; /**< Channel type. + * @li @b 0 - "lowLoss", + * @li @b 1 - "highLoss", + * @li @b 2 - "mob0db", + * @li @b 3 - "mob3db", + * @li @b 4 - "extnd6db" + * @li @b 5 - "extnd8db" + */ + IN UINT8 DeviceNumber; /**< PCI Device number for port. + * @li @b 0 - Native port device number + * @li @b N - Port device number (See available configurations in BKDG + */ + IN UINT8 FunctionNumber; ///< Reserved for future use + IN UINT8 LinkSpeedCapability; /**< PCIe link speed/ + * @li @b 0 - Maximum supported by silicon + * @li @b 1 - Gen1 + * @li @b 2 - Gen2 + * @li @b 3 - Gen3 + */ + IN UINT8 LinkAspm; /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM) + * @li @b 0 - Disabled + * @li @b 1 - L0s only + * @li @b 2 - L1 only + * @li @b 3 - L0s and L1 + */ + IN UINT8 LinkHotplug; /**< Hotplug control. + * @li @b 0 - Disabled + * @li @b 1 - Basic + * @li @b 2 - Server + * @li @b 3 - Enhanced + */ + IN UINT8 ResetId; /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO + * identification which control reset for given port. + * Each port with unique GPIO should have unique ResetId assigned. + * All ports use same GPIO to control reset should have same ResetId assigned. + * see AgesaPcieSlotResetContol. + */ + IN PCIe_PORT_MISC_CONTROL MiscControls; ///< Misc extended controls + IN APIC_DEVICE_INFO ApicDeviceInfo; ///< IOAPIC device programming info + IN PCIE_ENDPOINT_STATUS EndpointStatus; ///< PCIe endpoint (device connected to PCIe port) status + IN RX_ADAPT_MODE RxAdaptMode; ///< Gen3 RxAdaptMode configuration +} PCIe_PORT_DATA; + +/// DDI channel lane mapping +typedef struct { ///< Structure that discribe lane mapping + IN UINT8 Lane0 :2; /**< Lane 0 mapping + * @li @b 0 - Map to lane 0 + * @li @b 1 - Map to lane 1 + * @li @b 2 - Map to lane 2 + * @li @b 2 - Map to lane 3 + */ + IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") + IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") + IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") +} CHANNEL_MAPPING; ///< Lane mapping + +/// Common Channel Mapping +typedef union { + IN UINT8 ChannelMappingValue; ///< Raw lane mapping + IN CHANNEL_MAPPING ChannelMapping; ///< Channel mapping +} CONN_CHANNEL_MAPPING; + +/// DDI Configuration data +typedef struct { + IN UINT8 ConnectorType; /**< Display Connector Type + * @li @b 0 - DP + * @li @b 1 - eDP + * @li @b 2 - Single Link DVI-D + * @li @b 3 - Dual Link DVI-D (see @ref DualLinkDviDescription "Example Dual Link DVI connector description") + * @li @b 4 - HDMI + * @li @b 5 - DP-to-VGA + * @li @b 6 - DP-to-LVDS + * @li @b 7 - Hudson-2 NutMeg DP-to-VGA + * @li @b 8 - Single Link DVI-I + * @li @b 9 - Native CRT (Family 0x14) + * @li @b 10 - Native LVDS (Family 0x14) + * @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or DP-to-LVDS + * The auto detection method only support panel with EDID. + */ + IN UINT8 AuxIndex; /**< Indicates which AUX or DDC Line is used + * @li @b 0 - AUX1 + * @li @b 1 - AUX2 + * @li @b 2 - AUX3 + * @li @b 3 - AUX4 + * @li @b 4 - AUX5 + * @li @b 5 - AUX6 + */ + IN UINT8 HdpIndex; /**< Indicates which HDP pin is used + * @li @b 0 - HDP1 + * @li @b 1 - HDP2 + * @li @b 2 - HDP3 + * @li @b 3 - HDP4 + * @li @b 4 - HDP5 + * @li @b 5 - HDP6 + */ + IN CONN_CHANNEL_MAPPING Mapping[2]; /**< Set specific mapping of lanes to connector pins + * @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane + * @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link) + * if Mapping[x] set to 0 than default mapping assumed + */ + IN UINT8 LanePnInversionMask; /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port. + * @li 0 - Do not invert (default) + * @li 1 - Invert P and N on this lane + */ + IN UINT8 Flags; /**< Capabilities flags + * @li Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 + * @li Flags bit[7:1] Reserved + */ +} PCIe_DDI_DATA; + +/// Engine Configuration +typedef struct { + IN UINT8 EngineType; /**< Engine type + * @li @b 0 - Ignore engine configuration + * @li @b 1 - PCIe port + * @li @b 2 - DDI + */ + IN UINT16 StartLane; /**< Start Lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + IN UINT16 EndLane; /**< End lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + +} PCIe_ENGINE_DATA; + +/// PCIe port descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info +} PCIe_PORT_DESCRIPTOR; + +/// DDI descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info +} PCIe_DDI_DESCRIPTOR; + +/// PCIe Complex descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in topology + */ + IN UINT32 SocketId; ///< Socket Id + IN const PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN const PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN VOID *Reserved; ///< Reserved for future use +} PCIe_COMPLEX_DESCRIPTOR; + +/// Action to control PCIe slot reset +typedef enum { + AssertSlotReset, ///< Assert slot reset + DeassertSlotReset ///< Deassert slot reset +} PCIE_RESET_CONTROL; + +///Slot Reset Info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 ResetId; ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR + IN UINT8 ResetControl; ///< Reset control as in PCIE_RESET_CONTROL +} PCIe_SLOT_RESET_INFO; + +#define GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST 0x1 + +///VBIOS image info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT VOID *ImagePtr; ///< Pointer to VBIOS image + IN PCI_ADDR GfxPciAddress; ///< PCI address of integrated graphics controller + IN UINT32 Flags; ///< BIT[0] - special repost requred +} GFX_VBIOS_IMAGE_INFO; + +/// Engine descriptor type +typedef enum { + PcieUnusedEngine = 0, ///< Unused descriptor + PciePortEngine = 1, ///< PCIe port + PcieDdiEngine = 2, ///< DDI + MaxPcieEngine ///< Max engine type for boundary check. +} PCIE_ENGINE_TYPE; + +/// PCIe link capability/speed +typedef enum { + PcieGenMaxSupported, ///< Maximum supported + PcieGen1 = 1, ///< Gen1 + PcieGen2, ///< Gen2 + PcieGen3, ///< Gen3 + MaxPcieGen ///< Max Gen for boundary check +} PCIE_LINK_SPEED_CAP; + +/// PCIe PSPP Power policy +typedef enum { + PsppDisabled, ///< PSPP disabled + PsppPerformance = 1, ///< Performance + PsppBalanceHigh, ///< Balance-High + PsppBalanceLow, ///< Balance-Low + PsppPowerSaving, ///< Power Saving + MaxPspp ///< Max Pspp for boundary check +} PCIE_PSPP_POLICY; + +/// DDI display connector type +typedef enum { + ConnectorTypeDP, ///< DP + ConnectorTypeEDP, ///< eDP + ConnectorTypeSingleLinkDVI, ///< Single Link DVI-D + ConnectorTypeDualLinkDVI, ///< Dual Link DVI-D + ConnectorTypeHDMI, ///< HDMI + ConnectorTypeDpToVga, ///< DP-to-VGA + ConnectorTypeDpToLvds, ///< DP-to-LVDS + ConnectorTypeNutmegDpToVga, ///< Hudson-2 NutMeg DP-to-VGA + ConnectorTypeSingleLinkDviI, ///< Single Link DVI-I + ConnectorTypeCrt, ///< CRT (VGA) + ConnectorTypeLvds, ///< LVDS + ConnectorTypeEDPToLvds, ///< 3rd party common eDP-to-LVDS translator chip without AMD SW init + ConnectorTypeEDPToLvdsSwInit, ///< 3rd party eDP-to-LVDS translator which requires AMD SW init + ConnectorTypeAutoDetect, ///< VBIOS auto detect connector type (native LVDS, eDP or DP-to-LVDS) + MaxConnectorType ///< Not valid value, used to verify input +} PCIE_CONNECTOR_TYPE; + +/// PCIe link channel type +typedef enum { + ChannelTypeLowLoss, ///< Low Loss + ChannelTypeHighLoss, ///< High Loss + ChannelTypeMob0db, ///< Mobile 0dB + ChannelTypeMob3db, ///< Mobile 3dB + ChannelTypeExt6db, ///< Extended 6dB + ChannelTypeExt8db, ///< Extended 8dB + MaxChannelType ///< Not valid value, used to verify input +} PCIE_CHANNEL_TYPE; + +/// PCIe link ASPM +typedef enum { + AspmDisabled, ///< Disabled + AspmL0s, ///< PCIe L0s link state + AspmL1, ///< PCIe L1 link state + AspmL0sL1, ///< PCIe L0s & L1 link state + MaxAspm ///< Not valid value, used to verify input +} PCIE_ASPM_TYPE; + +/// PCIe link hotplug support +typedef enum { + HotplugDisabled, ///< Hotplug disable + HotplugBasic, ///< Basic Hotplug + HotplugServer, ///< Server Hotplug + HotplugEnhanced, ///< Enhanced + HotplugInboard, ///< Inboard + MaxHotplug ///< Not valid value, used to verify input +} PCIE_HOTPLUG_TYPE; + +/// PCIe link initialization +typedef enum { + PortDisabled, ///< Disable + PortEnabled ///< Enable +} PCIE_PORT_ENABLE; + +/// PCIe ACS capability - Access Control Services +typedef enum { + PcieAcsDisabled, ///< Disabled + PcieAcsEnabled, ///< Enabled +} PCIE_ACS_CAP; + +/// PCIe ClkPmSupport initialization +typedef enum { + ClkPmSupportDisabled, ///< Disable + ClkPmSupportEnabled ///< Enable +} CLKPM_SUPPORT_ENABLE; + +/// DDI Aux channel +typedef enum { + Aux1, ///< Aux1 + Aux2, ///< Aux2 + Aux3, ///< Aux3 + Aux4, ///< Aux4 + Aux5, ///< Aux5 + Aux6, ///< Aux6 + MaxAux ///< Not valid value, used to verify input +} PCIE_AUX_TYPE; + +/// DDI Hdp Index +typedef enum { + Hdp1, ///< Hdp1 + Hdp2, ///< Hdp2 + Hdp3, ///< Hdp3 + Hdp4, ///< Hdp4 + Hdp5, ///< Hdp5 + Hdp6, ///< Hdp6 + MaxHdp ///< Not valid value, used to verify input +} PCIE_HDP_TYPE; + +/// PCIe_DDI_DATA.Flags definitions +#define DDI_DATA_FLAGS_DP1_1_ONLY 0x01 ///< BIT[0] Selects downgrade PHY link to DP1.1 +#define EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN 0x02 ///< BIT[1] VBIOS will always output fixed voltage swing during DP link training +#define EXT_DISPLAY_PATH_CAPS_HDMI20_PI3EQX1204 0x04 ///< BIT[2] HDMI 2.0 connector +#define EXT_DISPLAY_PATH_CAPS_HDMI20_TISN65DP159RSBT 0x08 ///< BIT[3] HDMI 2.0 connector + +/// DP receiver definitions with fixed voltage swing +typedef enum { + DP_VS_0_4V_0DB, ///< 0x00 + DP_VS_0_6V_0DB, ///< 0x01 + DP_VS_0_8V_0DB, ///< 0x02 + DP_VS_1_2V_0DB, ///< 0x03 + DP_VS_0_4V_3_5DB = 0x8, ///< 0x08 + DP_VS_0_6V_3_5DB, ///< 0x09 + DP_VS_0_8V_3_5DB, ///< 0x0a + DP_VS_0_4V_6DB = 0x10, ///< 0x10 + DP_VS_0_6V_6DB, ///< 0x11 + DP_VS_0_4V_9_5DB = 0x18 ///< 0x18 +} DP_FIXED_VOLT_SWING_TYPE; + +// definition for eDP 1.4 VSMode +#define EDP_VS_LEGACY_MODE 0 ///< Legacy Mode +#define EDP_VS_LOW_VDIFF_MODE 1 ///< Low Vdiff Training Mode +#define EDP_VS_HIGH_VDIFF_MODE 2 ///< High Vdiff Training Mode +#define EDP_VS_STRETCH_MODE 3 ///< Stretched DP training mode +#define EDP_VS_SINGLE_VDIFF_MODE 4 ///< Single Vdiff Training Mode +#define EDP_VS_VARIABLE_PREM_MODE 5 ///< Single Vdiff Training with Variable Transition Vdiff + +/// HDMI re-driver register/value +typedef struct _HDMI_RE_DRIVER_I2C_REG_INFO { + IN UINT8 RegIndex; ///< HDMI re-driver Register Index + IN UINT8 RegVal; ///< HDMI re-driver Register Value +} HDMI_RE_DRIVER_I2C_REG_INFO; + +/// AZ I2SBUS select +typedef enum { + GnbAcpI2sBus, ///< I2sBus + GnbAcpAzalia, ///< Azalia + MaxAcp ///< Not valid value, used to verify input +} GNB_ACP_TYPE; + +/// AZ I2SBUS pin configuration +typedef enum { + GnbAcp4Tx4RxBluetooth, ///< 4Tx4Rx and Bluetooth + GnbAcp2Tx4RxBluetooth, ///< 2Tx4Rx and Bluetooth + GnbAcp6Tx4RxBluetooth, ///< 6Tx4Rx and Bluetooth + GnbAcpPinNotConfigured ///< Not valid value, used to verify input +} GNB_ACP_AZ_I2SBUS_PIN; + +/// Alternative DRAM MAC +typedef enum { + MAC_UNTESTEDMAC, ///< Assign 0 to Untested MAC + MAC_700k, ///< Assign 1 to 700k + MAC_600k, ///< Assign 2 to 600k + MAC_500k, ///< Assign 3 to 500k + MAC_400k, ///< Assign 4 to 400k + MAC_300k, ///< Assign 5 to 300k + MAC_200k, ///< Assign 6 to 200k + MAC_UNRESTRICTEDMAC = 8, ///< Assign 8 to Unrestricted MAC +} DRAM_MAXIMUM_ACTIVATE_COUNT; + +// Macro for statically initializing various structures +#define PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane} +#define PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \ +{mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, 0}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_V2(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_GEN3(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport, \ +mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration}} +#define PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \ +{mConnectorType, mAuxIndex, mHpdIndex, {{0}, {0}}, 0, 0} +#define PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, 0} +#define PCIE_DDI_DATA_INITIALIZER_V2(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion, mFlags) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, mFlags} + +///IOMMU requestor ID +typedef struct { + IN UINT16 Bus :8; ///< Bus + IN UINT16 Device :5; ///< Device + IN UINT16 Function :3; ///< Function +} IOMMU_REQUESTOR_ID; + +/// IVMD exclusion range descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Flags[31] - Terminate descriptor array. + * @li @b Flags[30] - Ignore descriptor. + */ + IN IOMMU_REQUESTOR_ID RequestorIdStart; ///< Requestor ID start + IN IOMMU_REQUESTOR_ID RequestorIdEnd; ///< Requestor ID end (use same as start for single ID) + IN UINT64 RangeBaseAddress; ///< Phisical base address of exclusion range + IN UINT64 RangeLength; ///< Length of exclusion range in bytes +} IOMMU_EXCLUSION_RANGE_DESCRIPTOR; + +/*---------------------------------------------------------------------------- + * GNB configuration info + *---------------------------------------------------------------------------- + */ + +/// LVDS Misc Control Field +typedef struct { + IN UINT8 FpdiMode:1; ///< This item configures LVDS 888bit panel mode + ///< @li FALSE = LVDS 888 panel in LDI mode + ///< @li TRUE = LVDS 888 panel in FPDI mode + ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE} + IN UINT8 DlChSwap:1; ///< This item configures LVDS panel lower and upper link mapping + ///< @li FALSE = Lower link and upper link not swap + ///< @li TRUE = Lower link and upper link are swapped + ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP} + IN UINT8 BitDepth:1; ///< Customer may use 888 bit LVDS panel, but the LVDS panel EDID does not support v1.4 so that VBIOS can not decide the panel bit per color + ///< @li FALSE = LCD 666 18bit panel + ///< @li TRUE = LCD 888 24bit panel + ///< @BldCfgItem{BLDCFG_LVDS_BIT_DEPTH} + IN UINT8 ParamOverwriteEn:1; ///< LVDS parameter overwrite enable + ///< @li FALSE = LVDS parameter overwrite disable + ///< @li TRUE = LVDS parameter overwrite enable + ///< @BldCfgItem{BLDCFG_LVDS_PARAM_OVERWRITE_EN} + IN UINT8 BLONActiveLow:1; ///< This item configures polarity of signal sent to digital BLON output pin + ///< @li FALSE = Not inverted(active high) + ///< @li TRUE = Inverted (active low) + ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW} + IN UINT8 LvdsVoltOverwriteEn:1; ///< This item configures polarity of DP-to-LVDS output voltage overwrite + ///< @li FALSE = DP-to-LVDS output voltage overwrite disable, use VBIOS default setting. + ///< @li TRUE = Use ucLVDSVolAdjust value to program register LVDS_CTRL_4 + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE} + IN UINT8 Reserved:2; ///< Reserved +} LVDS_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _LVDS_MISC_CONTROL { + IN LVDS_MISC_CONTROL_FIELD Field; ///< LVDS_MISC_CONTROL_FIELD + IN UINT8 Value; ///< LVDS Misc Control Value +} LVDS_MISC_CONTROL; + +/// Display Misc Control Field +typedef struct { + IN UINT8 Reserved1:3; ///< Reserved + IN UINT8 VbiosFastBootEn:1; ///< This item configures VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open. + ///< @li FALSE = VBIOS fast boot is disable. + ///< @li TRUE = VBIOS fast boot is enable. + ///< @BldCfgItem{BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE} + IN UINT8 Reserved2:4; ///< Reserved +} DISPLAY_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _DISPLAY_MISC_CONTROL { + IN DISPLAY_MISC_CONTROL_FIELD Field; ///< DISPLAY_MISC_CONTROL_FIELD + IN UINT8 Value; ///< Display Misc Control Value +} DISPLAY_MISC_CONTROL; + +/// HD Audio Codec table list +typedef struct _CODEC_VERB_TABLE_LIST { + IN UINT32 CodecId; ///< CodecID - Codec ID + IN UINT32 CodecTablePtr; ///< CodecTablePtr - Codec table pointer +} CODEC_VERB_TABLE_LIST; + +/// POST Configuration settings for GNB. +typedef struct { + IN UINT8 IgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use existing default - + ///< @li 1 = Disable iGPU if any PCIe/PCI graphics card present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} +} GNB_POST_CONFIGURATION; + +/// iGPU Enable/Disable Policy values +#define IGPU_DISABLE_AUTO 0 ///< Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics +#define IGPU_DISABLE_ANY_PCIE 1 ///< Disable iGPU if any PCI or PCIE graphics card is present + +/// ENV Configuration settings for GNB. +typedef struct { + IN UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + ///< @li 0 = Stereo 3D is disabled (default). + ///< @li 1 = Use processor pin HPD1. + ///< @li 2 = Use processor pin HPD2 + ///< @li 3 = Use processor pin HPD3 + ///< @li 4 = Use processor pin HPD4 + ///< @li 5 = Use processor pin HPD5 + ///< @li 6 = Use processor pin HPD6 + ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT} + IN BOOLEAN IommuSupport; ///< IOMMU support. + ///< @li FALSE = Disabled. Disable and hide IOMMU device. + ///< @li TRUE = Initialize IOMMU subsystem. Generate ACPI IVRS table. + ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT} + IN UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN UINT8 LvdsPowerOnSeqDigonToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE} + IN UINT8 LvdsPowerOnSeqDeToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL} + IN UINT8 LvdsPowerOnSeqDeToDigon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON} + IN UINT8 LvdsPowerOnSeqVaryBlToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE} + IN UINT8 LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY} + IN UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON} + IN UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL} + IN UINT16 LvdsMaxPixelClockFreq; ///< This item configures the maximum pixel clock frequency supported. + ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ} + IN UINT32 LcdBitDepthControlValue; ///< This item configures the LCD bit depth control settings. + ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE} + IN UINT8 Lvds24bbpPanelMode; ///< This item configures the LVDS 24 BBP mode. + ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE} + IN LVDS_MISC_CONTROL LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON + IN UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN GnbRemoteDisplaySupport; ///< This item enables Wireless Display Support + ///< @li TRUE = Enable Wireless Display Support + ///< @li FALSE = Disable Wireless Display Support + ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT} + IN UINT8 LvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL DisplayMiscControl;///< This item configures display misc control + IN DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN UINT32 GpuFrequencyLimit; ///< GNB GPU Max Frequency(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} + IN UINT8 EDPv1_4VSMode; ///< @BldCfgItem{BLDCFG_EDP_V1_4_VS_MODE} + IN UINT8 ExtHDMIReDrvSlvAddr; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_SLAVE_ADDR} + IN UINT8 ExtHDMIReDrvRegNum; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_REG_NUM} + IN UINT64 ExtHDMIRegSetting; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_REG_INFO} +} GNB_ENV_CONFIGURATION; + +/// Configuration settings for GNB. +typedef struct { + IN UINT8 iGpuVgaMode; ///< VGA resources decoding configuration for iGPU + ///< @li 0 = iGPU decode all VGA resources (must be primary VGA adapter) + ///< @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter) + IN UINT8 PcieAcsCapability; ///< Pcie ACS Capability support + ///< @li 0 = Disabled + ///< @li 1 = Enabled + IN UINT64 GnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} + IN UINT8 MaxNumAudioEndpoints; ///< Max number of audio endpoints + ///< @BldCfgItem{BLDCFG_MAX_NUM_AUDIO_ENDPOINTS} +} GNB_MID_CONFIGURATION; + +/// GNB configuration info +typedef struct { + IN const PCIe_COMPLEX_DESCRIPTOR *PcieComplexList; /**< Pointer to array of structures describe PCIe topology on each processor package or NULL. + * Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST + * Example of topology definition for single socket system: + * @code + * PCIe_PORT_DESCRIPTOR PortList [] = { + * // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * } + * }; + * PCIe_PORT_DESCRIPTOR DdiList [] = { + * // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1, 0) + * }, + * // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2, 0) + * } + * }; + * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate complexes list + * 0, //Socket ID + * &PortList[0], + * &DdiList[0], + * } + * @endcode + */ + IN UINT8 PsppPolicy; /**< PSPP (PCIe Speed Power Policy) + * @li @b 0 - Disabled + * @li @b 1 - Performance + * @li @b 2 - Balance-High + * @li @b 3 - Balance-Low + * @li @b 4 - Power Saving + */ + +} GNB_CONFIGURATION; + +/// Late Configuration settings for GNB. +typedef struct { + IN BOOLEAN Reserved; ///< Reserved -- Docked TDP headroom + IN UINT8 GnbIoapicId; ///< GNB IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_GNB_IOAPIC_ADDRESS == NULL or BLDCFG_IOMMU_SUPPORT == NULL or GnbIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + IN UINT8 FchIoapicId; ///< Fch IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_IOMMU_SUPPORT == NULL or or FchIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + +} GNB_LATE_CONFIGURATION; + +// +// MEMORY-SPECIFIC DATA STRUCTURES +// +// +// +// +// AGESA MAXIMIUM VALUES +// +// These Max values are used to define array sizes and associated loop +// counts in the code. They reflect the maximum values that AGESA +// currently supports and does not necessarily reflect the hardware +// capabilities of configuration. +// + +#define MAX_SOCKETS_SUPPORTED 1 ///< Max number of sockets in system +#define MAX_CHANNELS_PER_SOCKET 4 ///< Max Channels per sockets +#define MAX_DIMMS_PER_CHANNEL 4 ///< Max DIMMs on a memory channel (independent of platform) +#define NUMBER_OF_DELAY_TABLES 9 ///< Number of tables defined in CH_DEF_STRUCT. + ///< Eg: UINT16 *RcvEnDlys; + ///< UINT8 *WrDqsDlys; + ///< UINT8 *RdDqsDlys; + ///< UINT8 *WrDatDlys; + ///< UINT8 *RdDqsMinDlys; + ///< UINT8 *RdDqsMaxDlys; + ///< UINT8 *WrDatMinDlys; + ///< UINT8 *WrDatMaxDlys; +#define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables + +#define MAX_PLATFORM_TYPES 16 ///< Platform types per system + +#define MCT_TRNG_KEEPOUT_START 0x00004000ul ///< base [39:8] +#define MCT_TRNG_KEEPOUT_END 0x00007FFFul ///< base [39:8] +#define DATAEYE_VREF_RANGE 31 ///< Number of VREF steps in Data Eye Bitmap + +#define UMA_ATTRIBUTE_INTERLEAVE 0x80000000ul ///< Uma Region is interleaved +#define UMA_ATTRIBUTE_ON_DCT0 0x40000000ul ///< UMA resides on memory that belongs to DCT0 +#define UMA_ATTRIBUTE_ON_DCT1 0x20000000ul ///< UMA resides on memory that belongs to DCT1 +#define UMA_ATTRIBUTE_ON_DCT2 0x10000000ul ///< UMA resides on memory that belongs to DCT2 +#define UMA_ATTRIBUTE_ON_DCT3 0x08000000ul ///< UMA resides on memory that belongs to DCT3 + +typedef UINT8 PSO_TABLE; ///< Platform Configuration Table + +// AGESA DEFINITIONS +// +// Many of these are derived from the platform and hardware specific definitions + +/// EccSymbolSize override value +#define ECCSYMBOLSIZE_USE_BKDG 0 ///< Use BKDG Recommended Value +#define ECCSYMBOLSIZE_FORCE_X4 4 ///< Force to x4 +#define ECCSYMBOLSIZE_FORCE_X8 8 ///< Force to x8 +/// CPU Package Type +#define PT_L1 0 ///< L1 Package type +#define PT_M2 1 ///< AM Package type +#define PT_S1 2 ///< S1 Package type + +/// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/// Build Configuration values for BLDCFG_TIMING_MODE_SELECT +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/// Build Configuration values for BLDCFG_POWER_DOWN_MODE +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode +#define POWER_DOWN_MODE_AUTO 2 ///< AGESA to select power down mode + +/// Build Configuration limit for BLDCFG_GNB_GPU_MAX_FREQUENCY +#define UNSUPPORTED_GPU_FREQUENCY 901 ///< Highest limit of GPU frequency + +/// Structures use to pass system Logical CPU-ID +typedef struct { + IN OUT UINT16 Family; ///< Indicates logical ID Family + IN OUT UINT16 Revision; ///< Indicates logical ID Family +} CPU_LOGICAL_ID; + +/// Structures use to report AMP status +typedef struct { + OUT BOOLEAN AmpVoltageValid; ///< Indicates if Amp voltage is valid + OUT BOOLEAN AmpSupportDetectedButNotEnabled; ///< Indicates if Amp support is detected but not enabled + OUT BOOLEAN AmpSelectedButNotEnabled; ///< Indicates if Amp is selected but not enabled +} AMP_STATUS; + +/// Normalized Critical Composite Data Eye +/// Bit 15 represents trained eye Center +/// Bit 0 represents eye center -15 delay steps +/// Bit 31 represents eye center +16 delay steps +/// Offset 0 represents +15 Vref Steps +/// Offset 31 represents -15 Vref Steps +typedef UINT32 COMPOSITE_DATAEYE[DATAEYE_VREF_RANGE]; + +/// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE +typedef enum { + AMD_PLATFORM_SERVER = 0x8000, ///< Server + AMD_PLATFORM_DESKTOP = 0x10000, ///< Desktop + AMD_PLATFORM_MOBILE = 0x20000, ///< Mobile +} AMD_PLATFORM_TYPE; + +/// Dram technology type +typedef enum { + DDR2_TECHNOLOGY, ///< DDR2 technology + DDR3_TECHNOLOGY, ///< DDR3 technology + GDDR5_TECHNOLOGY, ///< GDDR5 technology + UNSUPPORTED_TECHNOLOGY, ///< Unsupported technology +} TECHNOLOGY_TYPE; + +/// Low voltage support +typedef enum { + VOLT_INITIAL, ///< Initial value for VDDIO + VOLT1_5, ///< 1.5 Volt + VOLT1_35, ///< 1.35 Volt + VOLT1_25, ///< 1.25 Volt + VOLT_UNSUPPORTED = 0xFF ///< No common voltage found +} DIMM_VOLTAGE; + +/// AMP voltage support +typedef enum { + AMP_VOLT_RSVD, ///< Reserved + AMP_VOLT1_5, ///< 1.5 Volt + AMP_VOLT1_55, ///< 1.55 Volt + AMP_VOLT1_6, ///< 1.6 Volt + AMP_VOLT1_65, ///< 1.65 Volt + AMP_VOLT1_7, ///< 1.7 Volt + AMP_VOLT1_75, ///< 1.75 Volt + AMP_VOLT1_8, ///< 1.8 Volt + AMP_VOLT1_85, ///< 1.85 Volt + AMP_VOLT1_9, ///< 1.9 Volt + AMP_VOLT1_45 = 0x10, ///< 1.45 Volt + AMP_VOLT1_4 = 0x20, ///< 1.4 Volt + AMP_VOLT1_35 = 0x30, ///< 1.35 Volt + AMP_VOLT1_3 = 0x40, ///< 1.3 Volt + AMP_VOLT1_25 = 0x50, ///< 1.25 Volt + AMP_VOLT1_2 = 0x60 ///< 1.2 Volt +} AMP_DIMM_VOLTAGE; + +/// Build Configuration values for BLDCFG_RESOLUTION +typedef enum { + DISPLAY_1920x1080_And_Below = 0, ///< 1920x1080 and below + DISPLAY_2560x1600 = 1, ///< 2560x1600 + DISPLAY_3840x2160 = 2 ///< 3840x2160 +} DISPLAY_RESOLUTION; + +/// Build Configuration values for BLDCFG_ACP_SIZE +typedef enum { + NO_ACP_SIZE = 0x00, ///< NO ACP + ACP_SIZE_2MB = 0x20, ///< UMA 4MB aligned + ACP_SIZE_4MB = 0x40, ///< UMA 128MB aligned +} ACP_SIZE; + +/// UMA Version +typedef enum { + UMA_LEGACY = 0, ///< UMA Legacy Version + UMA_NON_LEGACY = 1 ///< UMA Non Legacy Version +} UMA_VERSION; + +/// UMA Mode +typedef enum { + UMA_NONE = 0, ///< UMA None + UMA_SPECIFIED = 1, ///< UMA Specified + UMA_AUTO = 2 ///< UMA Auto +} UMA_MODE; + +/// Force Training Mode +typedef enum { + FORCE_TRAIN_1D = 0, ///< 1D Training only + FORCE_TRAIN_2D = 1, ///< 2D Training only + FORCE_TRAIN_AUTO = 2 ///< Auto - 1D or 2D depending on configuration +} FORCE_TRAIN_MODE; + +/// PMU Training Mode +typedef enum { + PMU_TRAIN_1D = 0, ///< PMU 1D Training only + PMU_TRAIN_1D_2D_READ = 1, ///< PMU 1D and 2D Training read only + PMU_TRAIN_1D_2D = 2, ///< PMU 1D and 2D Training + PMU_TRAIN_AUTO = 3 ///< Auto - PMU Training depend on configuration +} PMU_TRAIN_MODE; + +/// The possible DRAM prefetch mode settings. +typedef enum { + DRAM_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_DRAM_PREFETCH_FOR_IO, ///< Disable DRAM prefetching for I/O requests only. + DISABLE_DRAM_PREFETCH_FOR_CPU, ///< Disable DRAM prefetching for requests from processor cores only. + DISABLE_DRAM_PREFETCHER, ///< Disable DRAM prefetching. + MAX_DRAM_FREFETCH_MODE ///< Not a DRAM prefetch mode, use for limit checking. +} DRAM_PREFETCH_MODE; + +/// Build Configuration values for BLDCFG_UMA_ALIGNMENT +typedef enum { + NO_UMA_ALIGNED = 0x00FFFFFF, ///< NO UMA aligned + UMA_4MB_ALIGNED = 0x00FFFFC0, ///< UMA 4MB aligned + UMA_128MB_ALIGNED = 0x00FFF800, ///< UMA 128MB aligned + UMA_256MB_ALIGNED = 0x00FFF000, ///< UMA 256MB aligned + UMA_512MB_ALIGNED = 0x00FFE000, ///< UMA 512MB aligned +} UMA_ALIGNMENT; + +/// +/// Global MCT Configuration Status Word (GStatus) +/// +typedef enum { + GsbMTRRshort, ///< Ran out of MTRRs while mapping memory + GsbAllECCDimms, ///< All banks of all Nodes are ECC capable + GsbDramECCDis, ///< Dram ECC requested but not enabled. + GsbSoftHole, ///< A Node Base gap was created + GsbHWHole, ///< A HW dram remap was created + GsbNodeIntlv, ///< Node Memory interleaving was enabled + GsbSpIntRemapHole, ///< Special condition for Node Interleave and HW remapping + GsbEnDIMMSpareNW, ///< Indicates that DIMM Spare can be used without a warm reset + + GsbEOL ///< End of list +} GLOBAL_STATUS_FIELD; + +/// +/// Local Error Status (DIE_STRUCT.ErrStatus[31:0]) +/// +typedef enum { + EsbNoDimms, ///< No DIMMs + EsbSpdChkSum, ///< SPD Checksum fail + EsbDimmMismatchM, ///< dimm module type(buffer) mismatch + EsbDimmMismatchT, ///< dimm CL/T mismatch + EsbDimmMismatchO, ///< dimm organization mismatch (128-bit) + EsbNoTrcTrfc, ///< SPD missing Trc or Trfc info + EsbNoCycTime, ///< SPD missing byte 23 or 25 + EsbBkIntDis, ///< Bank interleave requested but not enabled + EsbDramECCDis, ///< Dram ECC requested but not enabled + EsbSpareDis, ///< Online spare requested but not enabled + EsbMinimumMode, ///< Running in Minimum Mode + EsbNoRcvrEn, ///< No DQS Receiver Enable pass window found + EsbSmallRcvr, ///< DQS Rcvr En pass window too small (far right of dynamic range) + EsbNoDqsPos, ///< No DQS-DQ passing positions + EsbSmallDqs, ///< DQS-DQ passing window too small + EsbDCBKScrubDis, ///< DCache scrub requested but not enabled + + EsbEMPNotSupported, ///< Processor is not capable for EMP. + EsbEMPConflict, ///< EMP requested but cannot be enabled since + ///< channel interleaving, bank interleaving, or bank swizzle is enabled. + EsbEMPDis, ///< EMP requested but cannot be enabled since + ///< memory size of each DCT is not a power of two. + + EsbEOL ///< End of list +} ERROR_STATUS_FIELD; + +/// +/// Local Configuration Status (DIE_STRUCT.Status[31:0]) +/// +typedef enum { + SbRegistered, ///< All DIMMs are Registered + SbEccDimms, ///< All banks ECC capable + SbParDimms, ///< All banks Addr/CMD Parity capable + SbDiagClks, ///< Jedec ALL slots clock enable diag mode + Sb128bitmode, ///< DCT in 128-bit mode operation + Sb64MuxedMode, ///< DCT in 64-bit mux'ed mode. + Sb2TMode, ///< 2T CMD timing mode is enabled. + SbSWNodeHole, ///< Remapping of Node Base on this Node to create a gap. + SbHWHole, ///< Memory Hole created on this Node using HW remapping. + SbOver400Mhz, ///< DCT freq greater than or equal to 400MHz flag + SbDQSPosPass2, ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz + SbDQSRcvLimit, ///< Used for DQSRcvEnTrain to know we have reached the upper bound. + SbExtConfig, ///< Indicate the default setting for extended PCI configuration support + SbLrdimms, ///< All DIMMs are LRDIMMs + + SbEOL ///< End of list +} LOCAL_STATUS_FIELD; + + +///< CPU MSR Register definitions ------------------------------------------ +#define SYS_CFG 0xC0010010ul +#define TOP_MEM 0xC001001Aul +#define TOP_MEM2 0xC001001Dul +#define HWCR 0xC0010015ul +#define NB_CFG 0xC001001Ful + +#define FS_BASE 0xC0000100ul +#define IORR0_BASE 0xC0010016ul +#define IORR0_MASK 0xC0010017ul +#define BU_CFG 0xC0011023ul +#define BU_CFG2 0xC001102Aul +#define COFVID_STAT 0xC0010071ul +#define TSC 0x10 + +//----------------------------------------------------------------------------- +/// +/// SPD Data for each DIMM. +/// +typedef struct _SPD_DEF_STRUCT_DX { + IN BOOLEAN SpdValid; ///< Indicates that the SPD is valid + IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid + IN UINT32 Adderess; ///< SMBus Address + IN UINT8 Data[512]; ///< Buffer for 256 Bytes of SPD data from DIMM +} SPD_DEF_STRUCT_DX; + +//----------------------------------------------------------------------------- +/// +/// SPD Data for each DIMM. +/// +typedef struct _SPD_DEF_STRUCT { + IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid + IN UINT8 Data[256]; ///< Buffer for 256 Bytes of SPD data from DIMM +} SPD_DEF_STRUCT; + +//----------------------------------------------------------------------------- +/// +/// VDDP_VDDR Voltage Info for Low Power DIMM +/// +typedef struct _VDDP_VDDR_VOLTAGE { + IN BOOLEAN IsValid; ///< Indicates if daata is valid + IN UINT8 Voltage; ///< VDDP VDDR Voltage Value +} VDDP_VDDR_VOLTAGE; + +/// +/// Channel Definition Structure. +/// This data structure defines entries that are specific to the channel initialization +/// +typedef struct _CH_DEF_STRUCT { + OUT UINT8 ChannelID; ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) + OUT TECHNOLOGY_TYPE TechType; ///< Technology type of this channel + OUT UINT8 ChDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + + OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel. + OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel. + OUT SPD_DEF_STRUCT *SpdPtr; ///< Pointer to the SPD data for this channel. (Setup by NB Constructor) + OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to + ///< SPD Data for each Dimm. (Setup by Tech Block Constructor) + OUT UINT8 ChDimmValid; ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. + ///< + OUT UINT8 RegDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. + OUT UINT8 LrDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. + OUT UINT8 SODimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved. + OUT UINT8 Loads; ///< Number of devices loading bus + OUT UINT8 Dimms; ///< Number of DIMMs loading Channel + OUT UINT8 Ranks; ///< Number of ranks loading Channel DATA + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + OUT BOOLEAN SlowModePs1; ///< 1T or 2T CMD mode (slow access mode) for Mem Pstate 1 + ///< FALSE = 1T + ///< TRUE = 2T + ///< The following pointers will be pointed to dynamically allocated buffers. + ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. + ///< Example: If DIMM and Byte based training, then + ///< XX is a value in Hex + ///< BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE + ///< Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX + ///< Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX + OUT UINT16 *RcvEnDlys; ///< DQS Receiver Enable Delays + OUT UINT8 *WrDqsDlys; ///< Write DQS delays (only valid for DDR3) + OUT UINT8 *RdDqsDlys; ///< Read Dqs delays + OUT UINT8 *WrDatDlys; ///< Write Data delays + OUT UINT8 *RdDqs2dDlys; ///< 2d Read DQS data + OUT UINT8 *RdDqsMinDlys; ///< Minimum Window for Read DQS + OUT UINT8 *RdDqsMaxDlys; ///< Maximum Window for Read DQS + OUT UINT8 *WrDatMinDlys; ///< Minimum Window for Write data + OUT UINT8 *WrDatMaxDlys; ///< Maximum Window for Write data + OUT UINT16 *RcvEnDlysMemPs1; ///< DQS Receiver Enable Delays for Mem Pstate 1 + OUT UINT8 *WrDqsDlysMemPs1; ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1 + OUT UINT8 *RdDqsDlysMemPs1; ///< Read Dqs delays for Memory Pstate 1 + OUT UINT8 *WrDatDlysMemPs1; ///< Write Data delays for Memory Pstate 1 + OUT UINT8 *RdDqs2dDlysMemPs1; ///< 2d Read DQS data for Memory Pstate 1 + OUT UINT8 *RdDqsMinDlysMemPs1; ///< Minimum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *RdDqsMaxDlysMemPs1; ///< Maximum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *WrDatMinDlysMemPs1; ///< Minimum Window for Write data for Memory Pstate 1 + OUT UINT8 *WrDatMaxDlysMemPs1; ///< Maximum Window for Write data for Memory Pstate 1 + OUT UINT8 RowCount; ///< Number of rows of the allocated buffer. + OUT UINT8 ColumnCount; ///< Number of columns of the allocated buffer. + OUT UINT8 *FailingBitMask; ///< Table of masks to Track Failing bits + OUT UINT8 *FailingBitMaskMemPs1; ///< Table of masks to Track Failing bits for Memory Pstate 1 + OUT VOID *RdDataEyes; ///< Pointer to Read Data Eye Bitmaps + OUT VOID *WrDataEyes; ///< Pointer to Write Data Eye Bitmaps + OUT UINT32 DctOdcCtl; ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) + OUT UINT32 DctAddrTmg; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) + OUT UINT32 DctAddrTmgPs1; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) for Mem Pstate 1 + OUT UINT32 PhyRODTCSLow; ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) + OUT UINT32 PhyRODTCSHigh; ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) + OUT UINT32 PhyWODTCSLow; ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) + OUT UINT32 PhyWODTCSHigh; ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) + OUT UINT8 PhyWLODT[4]; ///< Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) + OUT UINT16 DctEccDqsLike; ///< DCT DQS ECC UINT8 like... + OUT UINT8 DctEccDqsScale; ///< DCT DQS ECC UINT8 scale + OUT UINT16 PtrPatternBufA; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT16 PtrPatternBufB; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT8 ByteLane; ///< Current UINT8 Lane (0..7) + OUT UINT8 Direction; ///< Current DQS-DQ training write direction (0=read, 1=write) + OUT UINT8 Pattern; ///< Current pattern + OUT UINT8 DqsDelay; ///< Current DQS delay value + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT16 DctMaxRdLat[4]; ///< Max Read Latency (ns) for the DCT + ///< DctMaxRdLat [i] is for NBPstate i + OUT UINT8 DIMMValidCh; ///< DIMM# in CH + OUT UINT8 MaxCh; ///< Max number of CH in system + OUT UINT8 Dct; ///< Dct pointer + OUT UINT8 WrDatGrossH; ///< Write Data Gross delay high value + OUT UINT8 DqsRcvEnGrossL; ///< DQS Receive Enable Gross Delay low + + OUT UINT8 TrwtWB; ///< Non-SPD timing value for TrwtWB + OUT UINT8 CurrRcvrDctADelay; ///< for keep current RcvrEnDly + OUT UINT16 T1000; ///< get the T1000 figure (cycle time (ns) * 1K) + OUT UINT8 DqsRcvEnPass; ///< for TrainRcvrEn UINT8 lane pass flag + OUT UINT8 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag + OUT UINT8 SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training + + OUT UINT8 ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory + OUT UINT32 NodeSysBase; ///< for channel interleave usage + OUT UINT8 RefRawCard[MAX_DIMMS_PER_CHANNEL]; ///< Array of rawcards detected + OUT UINT8 CtrlWrd02[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 2 values per DIMM + OUT UINT8 CtrlWrd03[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 3 values per DIMM + OUT UINT8 CtrlWrd04[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 4 values per DIMM + OUT UINT8 CtrlWrd05[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 5 values per DIMM + OUT UINT8 CtrlWrd08[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 8 values per DIMM + + OUT UINT16 CsPresentDCT; ///< For each bit n 0..7, 1 = Chip-select n is present + OUT UINT8 DimmMirrorPresent; ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT8 DimmSpdCse; ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT8 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT8 DimmYr06; ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006 + OUT UINT8 DimmWk2406; ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) + OUT UINT8 DimmPlPresent; ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. + OUT UINT8 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT8 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present + OUT UINT8 Dimmx4Present; ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx8Present; ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx16Present; ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. + OUT UINT8 LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs + OUT UINT8 LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration + OUT UINT8 LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm. + OUT UINT8 DimmNibbleAccess; ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. + OUT UINT8 *MemClkDisMap; ///< This pointer will be set to point to an array that describes + ///< the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will + ///< base on this array to disable unused MemClk to save power. + ///< + ///< The array must have 8 entries. Each entry, which associates with + ///< one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. + ///< Example: + ///< BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package + ///< is like below: + ///< Bit AM3/S1g3 pin name + ///< 0 M[B,A]_CLK_H/L[0] + ///< 1 M[B,A]_CLK_H/L[1] + ///< 2 M[B,A]_CLK_H/L[2] + ///< 3 M[B,A]_CLK_H/L[3] + ///< 4 M[B,A]_CLK_H/L[4] + ///< 5 M[B,A]_CLK_H/L[5] + ///< 6 M[B,A]_CLK_H/L[6] + ///< 7 M[B,A]_CLK_H/L[7] + ///< And platform has the following routing: + ///< CS0 M[B,A]_CLK_H/L[4] + ///< CS1 M[B,A]_CLK_H/L[2] + ///< CS2 M[B,A]_CLK_H/L[3] + ///< CS3 M[B,A]_CLK_H/L[5] + ///< Then MemClkDisMap should be pointed to the following array: + ///< CLK_2 CLK_3 CLK_4 CLK_5 + ///< 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 + ///< Each entry of the array is the bitmask of 8 chip selects. + + OUT UINT8 *CKETriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of CKE pins to the DIMMs' ranks. + ///< The array must have 2 entries. Each entry, which associates with + ///< one CKE pin, is a bitmap of 8 CS that that CKE is routed to. + ///< AGESA will base on this array to disable unused CKE pins to save power. + + OUT UINT8 *ODTTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of ODT pins to the DIMMs' ranks. + ///< The array must have 4 entries. Each entry, which associates with + ///< one ODT pin, is a bitmap of 8 CS that that ODT is routed to. + ///< AGESA will base on this array to disable unused ODT pins to save power. + + OUT UINT8 *ChipSelTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of chip select pins to the DIMMs' ranks. + ///< The array must have 8 entries. Each entry is a bitmap of 8 CS. + ///< AGESA will base on this array to disable unused Chip select pins to save power. + + OUT UINT8 DimmSRTPresent; ///< For each bit n 0..3, 1 = DIMM n supports Extended Temperature Range where 4..7 are reserved + OUT UINT8 DimmASRPresent; ///< For each bit n 0..3, 1 = DIMM n supports Auto Self Refresh where 4..7 are reserved + + OUT BOOLEAN ExtendTmp; ///< If extended temperature is supported on all dimms on a channel. + + OUT UINT8 MaxVref; ///< Maximum Vref Value for channel + + OUT UINT8 Reserved[100]; ///< Reserved +} CH_DEF_STRUCT; + +/// +/// DCT Channel Timing Parameters. +/// This data structure sets timings that are specific to the channel. +/// +typedef struct _CH_TIMING_STRUCT { + OUT UINT16 DctDimmValid; ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. + OUT UINT16 DimmMirrorPresent; ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT16 DimmSpdCse; ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT16 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT16 CsPresent; ///< For each bit n 0..7, 1=Chip-select n is present + OUT UINT16 CsEnabled; ///< For each bit n 0..7, 1=Chip-select n is enabled + OUT UINT16 CsTestFail; ///< For each bit n 0..7, 1=Chip-select n is present but disabled + OUT UINT16 CsTrainFail; ///< Bitmap showing which chipselects failed training + OUT UINT16 DIMM1KPage; ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved + OUT UINT16 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT16 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved + OUT UINT16 Dimmx4Present; ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved + OUT UINT16 Dimmx8Present; ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved + OUT UINT16 Dimmx16Present; ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved + + OUT UINT16 DIMMTrcd; ///< Minimax Trcd*40 (ns) of DIMMs + OUT UINT16 DIMMTrp; ///< Minimax Trp*40 (ns) of DIMMs + OUT UINT16 DIMMTrtp; ///< Minimax Trtp*40 (ns) of DIMMs + OUT UINT16 DIMMTras; ///< Minimax Tras*40 (ns) of DIMMs + OUT UINT16 DIMMTrc; ///< Minimax Trc*40 (ns) of DIMMs + OUT UINT16 DIMMTwr; ///< Minimax Twr*40 (ns) of DIMMs + OUT UINT16 DIMMTrrd; ///< Minimax Trrd*40 (ns) of DIMMs + OUT UINT16 DIMMTwtr; ///< Minimax Twtr*40 (ns) of DIMMs + OUT UINT16 DIMMTfaw; ///< Minimax Tfaw*40 (ns) of DIMMs + OUT UINT16 TargetSpeed; ///< Target DRAM bus speed in MHz + OUT UINT16 Speed; ///< DRAM bus speed in MHz + ///< 400 (MHz) + ///< 533 (MHz) + ///< 667 (MHz) + ///< 800 (MHz) + ///< and so on... + OUT UINT8 Trcpage; ///< DCT Trcpage (10 ns) + OUT UINT8 CasL; ///< CAS latency DCT setting (busclocks) + OUT UINT8 Trcd; ///< DCT Trcd (busclocks) + OUT UINT8 Trp; ///< DCT Trp (busclocks) + OUT UINT8 Trtp; ///< DCT Trtp (busclocks) + OUT UINT8 Tras; ///< DCT Tras (busclocks) + OUT UINT8 Trc; ///< DCT Trc (busclocks) + OUT UINT8 Twr; ///< DCT Twr (busclocks) + OUT UINT8 Trrd; ///< DCT Trrd (busclocks) + OUT UINT8 Twtr; ///< DCT Twtr (busclocks) + OUT UINT8 Tfaw; ///< DCT Tfaw (busclocks) + OUT UINT16 Trfc0; ///< DCT Logical DIMM0 Trfc (in ns) + OUT UINT16 Trfc1; ///< DCT Logical DIMM1 Trfc (in ns) + OUT UINT16 Trfc2; ///< DCT Logical DIMM2 Trfc (in ns) + OUT UINT16 Trfc3; ///< DCT Logical DIMM3 Trfc (in ns) + OUT UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT. + ///< + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + ///< FALSE = 1T + ///< TRUE = 2T + OUT UINT8 TrwtTO; ///< DCT TrwtTO (busclocks) + OUT UINT8 Twrrd; ///< DCT Twrrd (busclocks) + OUT UINT8 Twrwr; ///< DCT Twrwr (busclocks) + OUT UINT8 Trdrd; ///< DCT Trdrd (busclocks) + OUT UINT8 TrwtWB; ///< DCT TrwtWB (busclocks) + OUT UINT8 TrdrdSD; ///< DCT TrdrdSD (busclocks) + OUT UINT8 TwrwrSD; ///< DCT TwrwrSD (busclocks) + OUT UINT8 TwrrdSD; ///< DCT TwrrdSD (busclocks) + OUT UINT16 MaxRdLat0; ///< Max Read Latency 0 + OUT UINT16 MaxRdLat1; ///< Max Read Latency 1 + OUT UINT16 MaxRdLat2; ///< Max Read Latency 2 + OUT UINT16 MaxRdLat3; ///< Max Read Latency 3 + OUT UINT8 WrDatGrossH; ///< Temporary variables must be removed + OUT UINT8 DqsRcvEnGrossL; ///< Temporary variables must be removed +} CH_TIMING_STRUCT; + +/// +/// Data for each DCT. +/// This data structure defines data used to configure each DRAM controller. +/// +typedef struct _DCT_STRUCT { + OUT UINT8 Dct; ///< Current Dct + OUT CH_TIMING_STRUCT Timings; ///< Channel Timing structure + OUT CH_TIMING_STRUCT *TimingsMemPs1; ///< Pointed to channel timing structure for memory Pstate 1 + OUT CH_DEF_STRUCT *ChData; ///< Pointed to a dynamically allocated array of Channel structures + OUT UINT8 ChannelCount; ///< Number of channel per this DCT + OUT BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT + OUT UINT8 BankAddrMap; ///< Bank Address Mapping + OUT UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT +} DCT_STRUCT; + + +/// +/// Data Structure defining each Die. +/// This data structure contains information that is used to configure each Die. +/// +typedef struct _DIE_STRUCT { + + /// Advanced: + + OUT UINT8 NodeId; ///< Node ID of current controller + OUT UINT8 SocketId; ///< Socket ID of this Die + OUT UINT8 DieId; ///< ID of this die relative to the socket + OUT PCI_ADDR PciAddr; ///< Pci bus and device number of this controller. + OUT AGESA_STATUS ErrCode; ///< Current error condition of Node + ///< 0x0 = AGESA_SUCCESS + ///< 0x1 = AGESA_UNSUPPORTED + ///< 0x2 = AGESA_BOUNDS_CHK + ///< 0x3 = AGESA_ALERT + ///< 0x4 = AGESA_WARNING + ///< 0x5 = AGESA_ERROR + ///< 0x6 = AGESA_CRITICAL + ///< 0x7 = AGESA_FATAL + ///< + OUT BOOLEAN ErrStatus[EsbEOL]; ///< Error Status bit Field + ///< + OUT BOOLEAN Status[SbEOL]; ///< Status bit Field + ///< + OUT UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. + ///< + OUT UINT32 NodeSysBase; ///< Base[47:16] (system address) DRAM base address of this Node. + ///< + OUT UINT32 NodeHoleBase; ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node + ///< + OUT UINT32 NodeSysLimit; ///< Base[47:16] (system address) DRAM limit address of this Node. + ///< + OUT UINT32 DimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + ///< + OUT UINT32 DimmValid; ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured + OUT UINT32 RegDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is registered DIMM + OUT UINT32 LrDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM + OUT UINT32 DimmEccPresent; ///< For each bit n 0..7, 1 = DIMM n is ECC capable. + OUT UINT32 DimmParPresent; ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. + ///< + OUT UINT16 DimmTrainFail; ///< Bitmap showing which dimms failed training + OUT UINT16 ChannelTrainFail; ///< Bitmap showing the channel information about failed Chip Selects + ///< 0 in any bit field indicates Channel 0 + ///< 1 in any bit field indicates Channel 1 + OUT UINT8 Dct; ///< Need to be removed + ///< DCT pointer + OUT BOOLEAN GangedMode; ///< Ganged mode + ///< 0 = disabled + ///< 1 = enabled + OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node + ///< + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT8 MLoad; ///< Need to be removed + ///< Number of devices loading MAA bus + ///< + OUT UINT8 MaxAsyncLat; ///< Legacy wrapper + ///< + OUT UINT8 ChbD3Rcvrdly; ///< Legacy wrapper + ///< + OUT UINT16 ChaMaxRdLat; ///< Max Read Latency (ns) for DCT 0 + ///< + OUT UINT8 ChbD3BcRcvrdly; ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay + + OUT DCT_STRUCT *DctData; ///< Pointed to a dynamically allocated array of DCT_STRUCTs + OUT UINT8 DctCount; ///< Number of DCTs per this Die + OUT UINT8 Reserved[16]; ///< Reserved +} DIE_STRUCT; + +/********************************************************************** + * S3 data block structure + **********************************************************************/ +/// AmdInitResume, AmdS3LateRestore, and AmdInitRtb param structure +typedef struct { + OUT UINT32 Signature; ///< "ASTR" for AMD Suspend-To-RAM + OUT UINT16 Version; ///< S3 Params version number + IN OUT UINT32 Flags; ///< Indicates operation + IN OUT VOID *NvStorage; ///< Pointer to memory critical save state data + IN OUT UINT32 NvStorageSize; ///< Size in bytes of the NvStorage region + IN OUT VOID *VolatileStorage; ///< Pointer to remaining AMD save state data + IN OUT UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region +} S3_DATA_BLOCK; + +/// Header at the beginning of a context save buffer. +typedef struct { + _2BYTE_ALIGN UINT16 Version; ///< Version of header + _4BYTE_ALIGN UINT32 Revision; ///< Revision of the S3 data blob + _2BYTE_ALIGN UINT16 NumDevices; ///< Number of devices in the list + _2BYTE_ALIGN UINT16 RelativeOrMaskOffset; ///< Size of device list + header + _4BYTE_ALIGN UINT32 BlobSize; ///<Size of the whole S3 data blob (including the header) + _4BYTE_ALIGN UINT32 NextBlockOffset; ///< Size of the whole device save context +} DEVICE_BLOCK_HEADER; + +///=============================================================================== +/// MEM_PARAMETER_STRUCT +/// This data structure is used to pass wrapper parameters to the memory configuration code +/// +typedef struct _MEM_PARAMETER_STRUCT { + + // Basic (Return parameters) + // (This section contains the outbound parameters from the memory init code) + + OUT BOOLEAN GStatus[GsbEOL]; ///< Global Status bitfield. + ///< + OUT UINT32 HoleBase; ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. + ///< + OUT UINT32 Sub4GCacheTop; ///< If not zero, the 32-bit top of cacheable memory. + ///< + OUT UINT32 Sub1THoleBase; ///< If not zero Base[47:16] (system address) of sub 1TB dram hole. + ///< + OUT UINT32 SysLimit; ///< Limit[47:16] (system address). + ///< + OUT DIMM_VOLTAGE DDR3Voltage; ///< Find support voltage and send back to platform BIOS. + ///< + OUT VDDP_VDDR_VOLTAGE VddpVddrVoltage; ///< For a given configuration, request is made to change the VDDP/VDDR + ///< voltage in platform BIOS via AgesaHookBeforeDramInit callout and + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage parameter if + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.IsValid is TRUE. The + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage is defined in + ///< MEMORY_PHY_VOLTAGE + OUT UINT8 ExternalVrefValue; ///< Target reference voltage for external Vref for 2D training + ///< + OUT struct _MEM_DATA_STRUCT *MemData; ///< Access to global memory init data. + + // Advanced (Optional parameters) + // Optional (all defaults values will be initialized by the + // 'AmdMemInitDataStructDef' based on AMD defaults. It is up + // to the IBV/OEM to change the defaults after initialization + // but prior to the main entry to the memory code): + + // Memory Map/Mgt. + + IN UINT16 BottomIo; ///< Bottom of 32-bit IO space (8-bits). + ///< NV_BOTTOM_IO[7:0]=Addr[31:24] + ///< + IN BOOLEAN MemHoleRemapping; ///< Memory Hole Remapping (1-bit). + ///< FALSE = disable + ///< TRUE = enable + ///< + IN BOOLEAN LimitMemoryToBelow1Tb; ///< Limit memory address space to below 1 TB + ///< FALSE = disable + ///< TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB} + + // Dram Timing + + IN UINT32 UserTimingMode; ///< User Memclock Mode. + ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT} + + IN UINT32 MemClockValue; ///< Memory Clock Value. + ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT} + + // Dram Configuration + + IN BOOLEAN EnableBankSwapOnly; ///< Bank Swap Only + ///< - FALSE =disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_SWAP_ONLY} + + IN BOOLEAN EnableBankIntlv; ///< Dram Bank (chip-select) Interleaving (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING} + + IN BOOLEAN EnableNodeIntlv; ///< Node Memory Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING} + + IN BOOLEAN EnableChannelIntlv; ///< Channel Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING} + // DllPDBypassMode + + IN BOOLEAN EnableDllPDBypassMode; ///< Enable low-power DDR phy operation. This feature is used for low-power + ///< solder-down DRAM motherboard designs with route matched CK/DQS/DQ signals. + ///< It limits maximim achieveable DDR rates on the platform and should not be + ///< enabled for systems requiring high DDR rate operation and/or DIMM-based systems. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_DDR_PHY_DLL_BYPASS_MODE} + // ECC + + IN BOOLEAN EnableEccFeature; ///< enable ECC error to go into MCE. + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE} + // Dram Power + + IN BOOLEAN EnablePowerDown; ///< CKE based power down mode (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE =enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN} + + // Dram Mac Default + + IN UINT8 DramMacDefault; ///< Default Maximum Activate Count + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ALTERNATIVE_MAX_ACTIVATE_COUNT} + + // Dram Extended Temperature Range + + IN BOOLEAN EnableExtendedTemperatureRange; ///< enable extended temperature support. + ///< - FALSE =disable (default) + ///< - TRUE =enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_EXTENDED_TEMPERATURE_RANGE} + // Extended temperature range + + // Online Spare + + IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0. + ///< - FALSE = disable Spare (default) + ///< - TRUE = enable Spare + ///< + ///< @BldCfgItem{BLDCFG_ONLINE_SPARE} + + IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings. + + IN PSO_TABLE *PlatformMemoryConfiguration; + ///< A table that contains platform specific settings. + ///< For example, MemClk routing, the number of DIMM slots per channel, .... + ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that + ///< contains default conservative settings. Platform BIOS can either tweak + ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. + ///< + IN BOOLEAN EnableParity; ///< Parity control. + ///< - TRUE = enable + ///< - FALSE = disable (default) + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE} + + IN BOOLEAN EnableBankSwizzle; ///< BankSwizzle control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE} + ///< + + IN BOOLEAN EnableMemClr; ///< Memory Clear functionality control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + // Uma Configuration + + IN UMA_VERSION UmaVersion; ///< Uma Version + ///< 0 = Legacy Version + ///< 1 = Non-Legacy Version + IN UMA_MODE UmaMode; ///< Uma Mode + ///< 0 = None + ///< 1 = Specified + ///< 2 = Auto + IN OUT UINT32 UmaSize; ///< The size of shared graphics dram (16-bits) + ///< NV_UMA_Size[31:0]=Addr[47:16] + ///< + OUT UINT32 UmaBase; ///< The allocated Uma base address (32-bits) + ///< NV_UMA_Base[31:0]=Addr[47:16] + ///< + + /// Memory Restore Feature + + IN BOOLEAN MemRestoreCtl; ///< Memory context restore control + ///< FALSE = perform memory init as normal (AMD default) + ///< TRUE = restore memory context and skip training. This requires + ///< MemContext is valid before AmdInitPost + ///< + IN BOOLEAN SaveMemContextCtl; ///< Control switch to save memory context at the end of MemAuto + ///< TRUE = AGESA will setup MemContext block before exit AmdInitPost + ///< FALSE = AGESA will not setup MemContext block. Platform is + ///< expected to call S3Save later in POST if it wants to + ///< use memory context restore feature. + ///< + IN OUT S3_DATA_BLOCK MemContext; ///< Memory context block describes the data that platform needs to + ///< save and restore for memory context restore feature to work. + ///< It uses the subset of S3Save block to save/restore. Hence platform + ///< may save only S3 block and uses it for both S3 resume and + ///< memory context restore. + ///< - If MemRestoreCtl is TRUE, platform needs to pass in MemContext + ///< before AmdInitPost. + ///< - If SaveMemContextCtl is TRUE, platform needs to save MemContext + ///< right after AmdInitPost. + ///< + IN BOOLEAN IsCapsuleMode; ///< Capsule reboot control + ///< FALSE = This is not a capsule reboot. + ///< TRUE = This is a capsule reboot. + ///< + IN BOOLEAN ExternalVrefCtl; ///< Control the use of external Vref + ///< TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list + ///< to change the vref + ///< FALSE = AGESA will will use the internal vref control. + ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE} + ///< + IN FORCE_TRAIN_MODE ForceTrainMode; ///< Training Mode + ///< 0 = Force 1D Training for all configurations + ///< 1 = Force 2D Training for all configurations + ///< 2 = Auto - AGESA will control 1D or 2D + IN TECHNOLOGY_TYPE DimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + ///< DDR3_TECHNOLOGY = Use DDR3 DIMMs + ///< GDDR5_TECHNOLOGY = Use GDDR5 DIMMs + ///< UNSUPPORTED_TECHNOLOGY = Exit with fatal error when DDR3 and GDDR5 DIMMs + ///< are installed on the same system + ///< @BldCfgItem{BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG} + IN BOOLEAN AmpEnable; ///< AMP functionality control + ///< TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA + ///< detects if memory is capable of it + ///< FALSE = Disable, there is no request to enable memory overclocking function + ///< + IN BOOLEAN AmpWarningMsgEnable; ///< AMP warning messages control + ///< TRUE = Enable to log the warning messages of AMP + ///< FALSE = Disable + ///< + OUT AMP_STATUS AmpStatus; ///< AMP status allows platform BIOS to check which voltage or warning message it should + ///< use/apply. + ///< + ///< AmpVoltageValid : + ///< TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment + ///< FALSE - AGESA does not enable AMP function, so use DDRVoltage for voltage adjustment + ///< + ///< AmpSupportDetectedButNotEnabled : + ///< TRUE - Display warning message of "AMP support detected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< AmpSelectedButNotEnabled : + ///< TRUE - Display warning message of "AMP selected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< Note that both of warning message status reports are controlled by AmpWarningMsgEnable + ///< + OUT AMP_DIMM_VOLTAGE AmpVoltage; ///< AMP voltage which will be sent back to platform BIOS, and + ///< the value in AmpVoltage is valid only if AmpStatus is TRUE returned + IN BOOLEAN DataEyeEn; ///< Get 2D training data eye + ///< TRUE = Enable to get the 2D data eye + ///< FALSE = The 2D data eye is not enabled + ///< @BldCfgItem{BLDCFG_ENABLE_DATA_EYE} + IN BOOLEAN DramDoubleRefreshRate; ///< Specify the average time between refresh requests to all DRAM devices. + ///< TRUE = 2x refresh rate. + ///< FALSE = 1x refresh rate. + ///< @BldCfgItem{BLDCFG_DRAM_DOUBLE_REFRESH_RATE} + IN PMU_TRAIN_MODE PmuTrainMode; ///< PMU Training Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + ///< 0 = PMU 1D Training only for all configurations + ///< 1 = PMU 1D and 2D Training read only for all configurations + ///< 2 = PMU 1D and 2D Training for all configurations + ///< 3 = AGESA control type of training depend on configurations + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION} + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE} + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE} + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE} + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE} + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE} + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD} + IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE} + IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL} + IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support + IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment + IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON} + IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT} + IN UINT32 CfgPowerDownMode; ///< Power Down Mode. + IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM} + IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED} + IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable. + IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable. + IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable. + IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable. + IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE} + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE} + IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; // Dimm Type Used In Mized Config + IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate + IN BOOLEAN DimmTypeDddr4Capable; ///< Indicates that the system is DDR4 Capable + ///< TRUE = Enable, platfrom BIOS requests support for DDR4 + ///< FALSE = Disable, platform BIOS requests no DDR4 support + ///< @BldCfgItem{BLDCFG_DIMM_TYPE_DDR4_CAPABLE} + IN BOOLEAN DimmTypeDddr3Capable; ///< Indicates that the system is DDR3 Capable + ///< TRUE = Enable, platfrom BIOS requests support for DDR3 + ///< FALSE = Disable, platform BIOS requests no DDR3 support + ///< @BldCfgItem{BLDCFG_DIMM_TYPE_DDR3_CAPABLE} + IN UINT16 CustomVddioSupport; ///< CustomVddioSupport + ///< @BldCfgItem{BLDCFG_CUSTOM_VDDIO_VOLTAGE} + +} MEM_PARAMETER_STRUCT; + + +/// +/// Function definition. +/// This data structure passes function pointers to the memory configuration code. +/// The wrapper can use this structure with customized versions. +/// +typedef struct _MEM_FUNCTION_STRUCT { + + // PUBLIC required Internal functions + + IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData); ///< Proc for Unbuffered DIMMs, platform specific + IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData); ///< Proc for Registered DIMMs, platform specific + + // PUBLIC optional functions + + IN OUT VOID (*amdMemEccInit) (VOID *pMemData); ///< NB proc for ECC feature + IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature + IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData); ///< NB proc for Channel interleave feature + IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData); ///< NB proc for Node interleave feature + IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData); ///< NB proc for parallel training feature + IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData); ///< NB code for early sample support feature + IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData); ///< NB code for 'multi-part' + IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData); ///< NB code for On-Line Spare feature + IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData); ///< NB code for UDIMMs + IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData); ///< NB code for RDIMMs + IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData); ///< NB code for LRDIMMs + IN OUT UINT32 Reserved[100]; ///< Reserved for later function definition +} MEM_FUNCTION_STRUCT; + +/// +/// Socket Structure +/// +/// +typedef struct _MEM_SOCKET_STRUCT { + OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels training data + + OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels timing data +} MEM_SOCKET_STRUCT; + +/// +/// Contains all data relevant to Memory Initialization. +/// +typedef struct _MEM_DATA_STRUCT { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + + IN MEM_PARAMETER_STRUCT *ParameterListPtr; ///< List of input Parameters + + OUT MEM_FUNCTION_STRUCT FunctionList; ///< List of function Pointers + + IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info + + IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling + + + OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED]; ///< Socket list for memory code. + ///< SocketList is a shortcut for IBVs to retrieve training + ///< and timing data for each channel indexed by socket/channel, + ///< eliminating their need to parse die/dct/channel etc. + ///< It contains pointers to the populated data structures for + ///< each channel and skips the channel structures that are + ///< unpopulated. In the case of channels sharing the same DCT, + ///< the pTimings pointers will point to the same DCT Timing data. + + OUT DIE_STRUCT *DiesPerSystem; ///< Pointed to an array of DIE_STRUCTs + OUT UINT8 DieCount; ///< Number of MCTs in the system. + + IN SPD_DEF_STRUCT *SpdDataStructure; ///< Pointer to SPD Data structure + + IN OUT struct _PLATFORM_CONFIGURATION *PlatFormConfig; ///< Platform profile/build option config structure + + IN OUT BOOLEAN IsFlowControlSupported; ///< Indicates if flow control is supported + + OUT UINT32 TscRate; ///< The rate at which the TSC increments in megahertz. + IN BOOLEAN PhyReceiverLowPower; ///< Force PHY receiver in low power. + ///< TRUE = PHY receiver low power + ///< FALSE = PHY receiver high power +} MEM_DATA_STRUCT; + +/// +/// Uma Structure +/// +/// +typedef struct _UMA_INFO { + OUT UINT64 UmaBase; ///< UmaBase[63:0] = Addr[63:0] + OUT UINT32 UmaSize; ///< UmaSize[31:0] = Addr[31:0] + OUT UINT32 UmaAttributes; ///< Indicate the attribute of Uma + OUT UINT8 UmaMode; ///< Indicate the mode of Uma + OUT UINT16 MemClock; ///< Indicate memory running speed in MHz + OUT UINT8 MemType; ///< Indicate the DRAM technology type that is being used + OUT UINT8 Reserved[2]; ///< Reserved for future usage +} UMA_INFO; + + +/// Bitfield for ID +typedef struct { + OUT UINT16 SocketId:8; ///< Socket ID + OUT UINT16 ModuleId:8; ///< Module ID +} ID_FIELD; +/// +/// Union for ID of socket and module that will be passed out in call out +/// +typedef union { + OUT ID_FIELD IdField; ///< Bitfield for ID + OUT UINT16 IdInformation; ///< ID information for call out +} ID_INFO; + +// AGESA MEMORY ERRORS + +// AGESA_SUCCESS memory events +#define MEM_EVENT_CAPSULE_IN_EFFECT 0x04013600ul ///< Capsule is in effect +#define MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT 0x04023600ul ///< Context restore is in effect + +// AGESA_ALERT Memory Errors +#define MEM_ALERT_USER_TMG_MODE_OVERRULED 0x04010000ul ///< TIMING_MODE_SPECIFIC is requested but + ///< cannot be applied to current configurations. +#define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100ul ///< DIMM organization miss-match +#define MEM_ALERT_BK_INT_DIS 0x04010200ul ///< Bank interleaving disable for internal issue + +// AGESA_ERROR Memory Errors +#define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300ul ///< No DQS Position window for RD DQS +#define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300ul ///< Small DQS Position window for RD DQS +#define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300ul ///< No DQS Position window for WR DQS +#define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300ul ///< Small DQS Position window for WR DQS +#define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500ul ///< DIMM sparing has not been enabled for an internal issues +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300ul ///< Receive Enable value is too large +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300ul ///< There is no DQS receiver enable window +#define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600ul ///< Time out when polling DramEnabled bit +#define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700ul ///< Time out when polling DctAccessDone bit +#define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800ul ///< Time out when polling SendCtrlWord bit +#define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900ul ///< Time out when polling PrefDramTrainMode bit +#define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00ul ///< Time out when polling EnterSelfRef bit +#define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00ul ///< Time out when polling FreqChgInProg bit +#define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00ul ///< Time out when polling ExitSelfRef bit +#define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00ul ///< Time out when polling SendMrsCmd bit +#define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00ul ///< Time out when polling SendZQCmd bit +#define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00ul ///< Time out when polling DctExtraAccessDone bit +#define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00ul ///< Time out when polling MemClrBusy bit +#define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00ul ///< Time out when polling MemCleared bit +#define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000ul ///< Time out when polling FlushWr bit +#define MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT 0x04012600ul ///< Time out when polling CurNBPstate bit +#define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300ul ///< Fail to find pass during Max Rd Latency training +#define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300ul ///< Fail to launch training code on an AP +#define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300ul ///< Fail to finish parallel training +#define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100ul ///< No address mapping found for a dimm +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT 0x040A0300ul ///< There is no DQS receiver enable window and the value is equal to the largest value +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300ul ///< Receive Enable value is too large and is 1 less than limit +#define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR 0x04011200ul ///< SPD Checksum error for NV_SPDCHK_RESTRT +#define MEM_ERROR_NO_CHIPSELECT 0x04011300ul ///< No chipselects found +#define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500ul ///< Unbuffered dimm is not supported at 333MHz +#define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300ul ///< Returned PRE value during write levelizzation was out of range +#define MEM_ERROR_NO_2D_RDDQS_WINDOW 0x040D0300ul ///< No 2D RdDqs Window +#define MEM_ERROR_NO_2D_RDDQS_HEIGHT 0x040E0300ul ///< No 2D RdDqs Height +#define MEM_ERROR_2D_DQS_ERROR 0x040F0300ul ///< 2d RdDqs Error +#define MEM_ERROR_INVALID_2D_RDDQS_VALUE 0x04022400ul ///< 2d RdDqs invalid value found +#define MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR 0x04023400ul ///< 2d RdDqs Vef Margin error found +#define MEM_ERROR_LR_IBT_NOT_FOUND 0x04013500ul ///< No LR dimm IBT value is found +#define MEM_ERROR_MR0_NOT_FOUND 0x04023500ul ///< No MR0 value is found +#define MEM_ERROR_ODT_PATTERN_NOT_FOUND 0x04033500ul ///< No odt pattern value is found +#define MEM_ERROR_RC2_IBT_NOT_FOUND 0x04043500ul ///< No RC2 IBT value is found +#define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND 0x04053500ul ///< No RC10 op speed is found +#define MEM_ERROR_RTT_NOT_FOUND 0x04063500ul ///< No RTT value is found +#define MEM_ERROR_P2D_NOT_FOUND 0x04073500ul ///< No 2D training config value is found +#define MEM_ERROR_SAO_NOT_FOUND 0x04083500ul ///< No slow access mode, Address timing and Output driver compensation value is found +#define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND 0x04093500ul ///< No CLK disable map is found +#define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND 0x040A3500ul ///< No CKE tristate map is found +#define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND 0x040B3500ul ///< No ODT tristate map is found +#define MEM_ERROR_CS_TRI_MAP_NOT_FOUND 0x040C3500ul ///< No CS tristate map is found +#define MEM_ERROR_TRAINING_SEED_NOT_FOUND 0x040D3500ul ///< No training seed is found +#define MEM_ERROR_NO_2D_WRDAT_WINDOW 0x040D0400ul ///< No 2D WrDat Window +#define MEM_ERROR_NO_2D_WRDAT_HEIGHT 0x040E0400ul ///< No 2D WrDat Height +#define MEM_ERROR_2D_WRDAT_ERROR 0x040F0400ul ///< 2d WrDat Error +#define MEM_ERROR_INVALID_2D_WRDAT_VALUE 0x04100400ul ///< 2d WrDat invalid value found +#define MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR 0x04110400ul ///< 2d WrDat Vef Margin error found +#define MEM_ERROR_PMU_TRAINING 0x04120400ul ///< Fail PMU training. + +// AGESA_WARNING Memory Errors +#define MEM_WARNING_UNSUPPORTED_QRDIMM 0x04011600ul ///< QR DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_UDIMM 0x04021600ul ///< U DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_SODIMM 0x04031600ul ///< SO-DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_X4DIMM 0x04041600ul ///< x4 DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_RDIMM 0x04051600ul ///< R DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_LRDIMM 0x04061600ul ///< LR DIMMs detected but not supported +#define MEM_WARNING_EMP_NOT_SUPPORTED 0x04011700ul ///< Processor is not capable for EMP +#define MEM_WARNING_EMP_CONFLICT 0x04021700ul ///< EMP cannot be enabled if channel interleaving, +#define MEM_WARNING_EMP_NOT_ENABLED 0x04031700ul ///< Memory size is not power of two. +#define MEM_WARNING_ECC_DIS 0x04041700ul ///< ECC has been disabled as a result of an internal issue +#define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800ul ///< Performance has been enabled, but battery life is preferred. + ///< bank interleaving, or bank swizzle is enabled. +#define MEM_WARNING_NO_SPDTRC_FOUND 0x04011900ul ///< No Trc timing value found in SPD of a dimm. +#define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000ul ///< Node Interleaveing Requested, but could not be enabled +#define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100ul ///< Channel Interleaveing Requested, but could not be enabled +#define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200ul ///< Bank Interleaveing Requested, but could not be enabled +#define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300ul ///< Voltage 1.35 determined, but could not be supported +#define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO 0x04012400ul ///< DDR3 voltage initial value is not 0 +#define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO 0x04012500ul ///< Cannot find a commonly supported VDDIO +#define MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED 0x04012900ul ///< AMP support detected but not enabled +#define MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED 0x04022900ul ///< AMP selected but not enabled + +// AGESA_FATAL Memory Errors +#define MEM_ERROR_MINIMUM_MODE 0x04011A00ul ///< Running in minimum mode +#define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00ul ///< DIMM modules are miss-matched +#define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00ul ///< No DIMMs have been found +#define MEM_ERROR_MISMATCH_DIMM_CLOCKS 0x04011D00ul ///< DIMM clocks miss-matched +#define MEM_ERROR_NO_CYC_TIME 0x04011E00ul ///< No cycle time found +#define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS 0x04011F00ul ///< Heap allocation error with dynamic storing of trained timings +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs 0x04021F00ul ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT +#define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV 0x04031F00ul ///< Heap allocation error with REMOTE_TRAINING_ENV +#define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD 0x04041F00ul ///< Heap allocation error for SPD data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA 0x04051F00ul ///< Heap allocation error for RECEIVED_DATA during parallel training +#define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS 0x04061F00ul ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER" +#define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA 0x04071F00ul ///< Heap allocation error for Training Data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK 0x04081F00ul ///< Heap allocation error for DIMM Identify "MEM_NB_BLOCK +#define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM 0x04022300ul ///< No Constructor for DIMM Identify +#define MEM_ERROR_VDDIO_UNSUPPORTED 0x04022500ul ///< VDDIO of the dimms on the board is not supported +#define MEM_ERROR_VDDPVDDR_UNSUPPORTED 0x04032500ul ///< VDDP/VDDR value indicated by the platform BIOS is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_2D 0x040B1F00ul ///< Heap allocation error for 2D training data +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_2D 0x040C1F00ul ///< Heap de-allocation error for 2D training data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE 0x040F1F00ul ///< Heap allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE 0x040E1F00ul ///< Heap de-allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_ALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04101F00ul ///< Heap allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04111F00ul ///< Heap de-allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_LOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04121F00ul ///< Heap location error for PMU SRAM Message Block Storage + +// AGESA_CRITICAL Memory Errors +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 0x04091F00ul ///< Heap allocation error for DMI table for DDR3 +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 0x040A1F00ul ///< Heap allocation error for DMI table for DDR2 +#define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG 0x04011400ul ///< Dimm population is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY 0x040D1F00ul ///< Heap allocation error for CRAT memory affinity info + + + +/*---------------------------------------------------------------------------- + * + * END OF MEMORY-SPECIFIC DATA STRUCTURES + * + *---------------------------------------------------------------------------- + */ + + + + +/*---------------------------------------------------------------------------- + * + * CPU RELATED DEFINITIONS + * + *---------------------------------------------------------------------------- + */ + +// CPU Event definitions. + +// Defines used to filter CPU events based on functional blocks +#define CPU_EVENT_PM_EVENT_MASK 0xFF00FF00ul +#define CPU_EVENT_PM_EVENT_CLASS 0x08000400ul + +//================================================================ +// CPU General events +// Heap allocation (AppFunction = 01h) +#define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT 0x08000100ul +#define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED 0x08010100ul +#define CPU_ERROR_HEAP_IS_FULL 0x08020100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED 0x08030100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT 0x08040100ul +// BrandId (AppFunction = 02h) +#define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE 0x08000200ul +// Micro code patch (AppFunction = 03h) +#define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED 0x08000300ul +// Power management (AppFunction = 04h) +#define CPU_EVENT_PM_PSTATE_OVERCURRENT 0x08000400ul +#define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT 0x08010400ul +#define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE 0x08020400ul +#define CPU_ERROR_PM_NB_PSTATE_MISMATCH 0x08030400ul +#define CPU_ERROR_PM_ALL_PSTATE_OVER_FREQUENCY_LIMIT 0x08040400ul +#define CPU_EVENT_PM_PSTATE_FREQUENCY_LIMIT 0x08050400ul +// Other CPU events (AppFunction = 05h) +#define CPU_EVENT_BIST_ERROR 0x08000500ul +#define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY 0x08010500ul +#define CPU_EVENT_STACK_REENTRY 0x08020500ul +#define CPU_EVENT_CORE_NOT_IDENTIFIED 0x08030500ul + +//================================================================= +// CPU Feature events +// Execution cache (AppFunction = 21h) +// AGESA_CACHE_SIZE_REDUCED 2101 +// AGESA_CACHE_REGIONS_ACROSS_1MB 2102 +// AGESA_CACHE_REGIONS_ACROSS_4GB 2103 +// AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 +// AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 +// AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 +// AGESA_DEALLOCATE_CACHE_REGIONS 2107 +#define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR 0x08002100ul +// Core Leveling (AppFunction = 22h) +#define CPU_WARNING_ADJUSTED_LEVELING_MODE 0x08002200ul +// SCS initialization (AppFunction = 24h) +// AGESA_SCS_HEAP_ENTRY_MISSING 2401 +// AGESA_SCS_BUFFER_EMPTY 2402 +// AGESA_SCS_WEIGHTS_MISMATCH 2403 +#define CPU_EVENT_SCS_INITIALIZATION_ERROR 0x08002400ul +// BTC vid adjustment error +#define CPU_EVENT_BTC_INITIALIZATION_ERROR 0x08002500ul + +// CPU Build Configuration structures and definitions + +/// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS +typedef struct { + IN UINT32 MsrAddr; ///< Fixed-Sized MTRR address + IN UINT64 MsrData; ///< MTRR Settings +} AP_MTRR_SETTINGS; + +#define AMD_AP_MTRR_FIX64k_00000 0x00000250ul +#define AMD_AP_MTRR_FIX16k_80000 0x00000258ul +#define AMD_AP_MTRR_FIX16k_A0000 0x00000259ul +#define AMD_AP_MTRR_FIX4k_C0000 0x00000268ul +#define AMD_AP_MTRR_FIX4k_C8000 0x00000269ul +#define AMD_AP_MTRR_FIX4k_D0000 0x0000026Aul +#define AMD_AP_MTRR_FIX4k_D8000 0x0000026Bul +#define AMD_AP_MTRR_FIX4k_E0000 0x0000026Cul +#define AMD_AP_MTRR_FIX4k_E8000 0x0000026Dul +#define AMD_AP_MTRR_FIX4k_F0000 0x0000026Eul +#define AMD_AP_MTRR_FIX4k_F8000 0x0000026Ful +#define CPU_LIST_TERMINAL 0xFFFFFFFFul + +/// Data structure for the Mapping Item between Unified ID for IDS Setup Option +/// and the option value. +/// +typedef struct { + IN UINT16 IdsNvId; ///< Unified ID for IDS Setup Option. + OUT UINT16 IdsNvValue; ///< The value of IDS Setup Option. +} IDS_NV_ITEM; + +/// Data Structure for IDS CallOut Function +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN IDS_NV_ITEM *IdsNvPtr; ///< Memory Pointer of IDS NV Table + IN OUT UINTN Reserved; ///< reserved +} IDS_CALLOUT_STRUCT; + +/// Data Structure for Connected Standby Function +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN VOID *CsRestoreTable; ///< Pointer to the CsRestoreTable + IN UINT32 CsRestoreTableSize; ///< Size in bytes of the CsRestoreTable +} CS_CALLOUT_STRUCT; + +/************************************************************************ + * + * AGESA interface Call-Out function parameter structures + * + ***********************************************************************/ + +/// Parameters structure for interface call-out AgesaAllocateBuffer +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT UINT32 BufferLength; ///< Size of buffer to allocate + IN UINT32 BufferHandle; ///< Identifier or name for the buffer + OUT VOID *BufferPointer; ///< location of the created buffer +} AGESA_BUFFER_PARAMS; + +/// Parameters structure for interface call-out AgesaHeapRebase +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINTN HeapAddress; ///< The address which heap content will be temporarily stored in +} AGESA_REBASE_PARAMS; + +/// Parameters structure for interface call-out AgesaRunCodeOnAp +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT32 FunctionNumber; ///< Index of the procedure to execute + IN VOID *RelatedDataBlock; ///< Location of data structure the procedure will use + IN UINT32 RelatedBlockLength; ///< Size of the related data block + IN BOOLEAN AllAPs; ///< run on all Aps or on one only +} AP_EXE_PARAMS; + +/// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 SocketId; ///< Address of SPD - socket ID + IN UINT8 MemChannelId; ///< Address of SPD - memory channel ID + IN UINT8 DimmId; ///< Address of SPD - DIMM ID + IN OUT UINT8 *Buffer; ///< Location where to place the SPD content + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference +} AGESA_READ_SPD_PARAMS; + +/// VoltageType values +typedef enum { + VTYPE_CPU_VREF, ///< Cpu side Vref + VTYPE_DIMM_VREF, ///< Dimm Side Vref + VTYPE_VDDIO ///< Vddio +} VTYPE; + +/// Parameters structure for the interface call-out AgesaExternalVoltageAdjust +typedef struct _VOLTAGE_ADJUST { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference + IN VTYPE VoltageType; ///< Which Voltage Type to adjust + IN INT8 AdjustValue; ///< Positive/Negative Adjust Value +} VOLTAGE_ADJUST; + +/// Buffer Handles +typedef enum { + AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000, ///< Assign 0x000D000 buffer handle to DMI function + AMD_PSTATE_DATA_BUFFER_HANDLE, ///< Assign 0x000D001 buffer handle to Pstate data + AMD_PSTATE_ACPI_BUFFER_HANDLE, ///< Assign 0x000D002 buffer handle to Pstate table + AMD_BRAND_ID_BUFFER_HANDLE, ///< Assign 0x000D003 buffer handle to Brand ID + AMD_WHEA_BUFFER_HANDLE, ///< Assign 0x000D004 buffer handle to WHEA function + AMD_S3_INFO_BUFFER_HANDLE, ///< Assign 0x000D005 buffer handle to S3 function + AMD_S3_NB_INFO_BUFFER_HANDLE, ///< Assign 0x000D006 buffer handle to S3 NB device info + AMD_ACPI_ALIB_BUFFER_HANDLE, ///< Assign 0x000D007 buffer handle to ALIB SSDT table + AMD_ACPI_IVRS_BUFFER_HANDLE, ///< Assign 0x000D008 buffer handle to IOMMU IVRS table + AMD_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D009 buffer handle to CRAT function + AMD_ACPI_CDIT_BUFFER_HANDLE, ///< Assign 0x000D00A buffer handle to CDIT function + AMD_GNB_SMU_MEMORY_INFO_BUFFER_HANDLE ///< Assign 0x000D00B buffer handle to SMU memory parameters function +} AMD_BUFFER_HANDLE; + + +/************************************************************************ + * + * AGESA interface Call-Out function prototypes + * + ***********************************************************************/ + +VOID +AgesaDoReset ( + IN UINTN ResetType, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AgesaAllocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *AllocParams + ); + +AGESA_STATUS +AgesaDeallocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *DeallocParams + ); + +AGESA_STATUS +AgesaLocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *LocateParams + ); + +AGESA_STATUS +AgesaHeapRebase ( + IN UINTN FcnData, + IN OUT AGESA_REBASE_PARAMS *RebaseParams + ); + +AGESA_STATUS +AgesaReadSpd ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaReadSpdRecovery ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaHookBeforeDramInitRecovery ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaRunFcnOnAp ( + IN UINTN ApicIdOfCore, + IN AP_EXE_PARAMS *LaunchApParams + ); + +AGESA_STATUS +AgesaRunFcnOnAllAps ( + IN UINTN FcnData, + IN AP_EXE_PARAMS *LaunchApParams + ); + +AGESA_STATUS +AgesaWaitForAllApsFinished ( + IN UINTN FcnData, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AgesaIdleAnAp ( + IN UINTN ApicIdOfCore, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AgesaHookBeforeDramInit ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeDQSTraining ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeExitSelfRefresh ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaPcieSlotResetControl ( + IN UINTN FcnData, + IN PCIe_SLOT_RESET_INFO *ResetInfo + ); + +AGESA_STATUS +AgesaGetVbiosImage ( + IN UINTN FcnData, + IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo + ); + +AGESA_STATUS +AgesaFchOemCallout ( + IN VOID *FchData + ); + +AGESA_STATUS +AgesaExternal2dTrainVrefChange ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaGetIdsData ( + IN UINTN Data, + IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData + ); + +AGESA_STATUS +AgesaExternalVoltageAdjust ( + IN UINTN SocketIdModuleId, + IN OUT VOLTAGE_ADJUST *AdjustValue + ); + +AGESA_STATUS +AgesaGnbOemCallout ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINTN FcnData, + IN OUT VOID *GnbCalloutData + ); + +/************************************************************************ + * + * AGESA interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Platform Configuration: The parameters in boot branch function + **********************************************************************/ + +/// The possible platform control flow settings. +typedef enum { + Nfcm, ///< Normal Flow Control Mode. + UmaDr, ///< UMA using Display Refresh flow control. + UmaIfcm, ///< UMA using Isochronous Flow Control. + Ifcm, ///< Isochronous Flow Control Mode (other than for UMA). + Iommu, ///< An IOMMU is in use in the system. + MaxControlFlow ///< Not a control flow mode, use for limit checking. +} PLATFORM_CONTROL_FLOW; + +/// The possible hardware prefetch mode settings. +typedef enum { + HARDWARE_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. + DISABLE_L1_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above. + DISABLE_L2_STRIDE_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above + DISABLE_HARDWARE_PREFETCH, ///< Disable hardware prefetching. + MAX_HARDWARE_PREFETCH_MODE ///< Not a hardware prefetch mode, use for limit checking. +} HARDWARE_PREFETCH_MODE; + +/// The possible software prefetch mode settings. +typedef enum { + SOFTWARE_PREFETCHES_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_SOFTWARE_PREFETCHES, ///< Disable software prefetches (convert software prefetch instructions to NOP). + MAX_SOFTWARE_PREFETCH_MODE ///< Not a software prefetch mode, use for limit checking. +} SOFTWARE_PREFETCH_MODE; + +/// Advanced performance tunings, prefetchers. +/// These settings provide for performance tuning to optimize for specific workloads. +typedef struct { + IN HARDWARE_PREFETCH_MODE HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting. + IN SOFTWARE_PREFETCH_MODE SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions. + IN DRAM_PREFETCH_MODE DramPrefetchMode; ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. +} ADVANCED_PERFORMANCE_PROFILE; + +/// The possible memory power policy settings. +typedef enum { + Performance, ///< Optimize for performance. + BatteryLife, ///< Optimize for battery life. + Auto, ///< Auto + MaxPowerPolicy ///< Not a power policy mode, use for limit checking. +} MEMORY_POWER_POLICY; + +/// Platform performance settings for optimized settings. +/// Several configuration settings for the processor depend upon other parts and +/// general designer choices for the system. The determination of these data points +/// is not standard for all platforms, so the host environment needs to provide these +/// to specify how the system is to be configured. +typedef struct { + IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; ///< The platform's control flow mode for optimum platform performance. + ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE} + IN BOOLEAN Use32ByteRefresh; ///< Display Refresh traffic generates 32 byte requests. + ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH} + IN BOOLEAN UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority. + ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY} + IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile; ///< The advanced platform performance settings. + IN MEMORY_POWER_POLICY MemoryPowerPolicy; ///< The memory's desired power policy + ///< @BldCfgItem{BLDCFG_MEMORY_POWER_POLICY_MODE} + IN BOOLEAN NbPstatesSupported; ///< The Nb-Pstates is supported or not + ///< @BldCfgItem{BLDCFG_NB_PSTATES_SUPPORTED} +} PERFORMANCE_PROFILE; + +/// Platform settings that describe the voltage regulator modules of the system. +/// Many power management settings are dependent upon the characteristics of the +/// on-board voltage regulator module (VRM). The host environment needs to provide +/// these to specify how the system is to be configured. +typedef struct { + IN UINT32 CurrentLimit; ///< Vrm Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_GFX_CURRENT_LIMIT} + IN UINT32 LowPowerThreshold; ///< Vrm Low Power Threshold. + ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD} + ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD} + ///< @BldCfgItem{BLDCFG_VRM_GFX_LOW_POWER_THRESHOLD} + IN UINT32 SlewRate; ///< Vrm Slew Rate. + ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE} + ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE} + ///< @BldCfgItem{BLDCFG_VRM_GFX_SLEW_RATE} + IN BOOLEAN HiSpeedEnable; ///< Select high speed VRM. + ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE} + ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE} + ///< @BldCfgItem{BLDCFG_VRM_GFX_HIGH_SPEED_ENABLE} + IN UINT32 MaximumCurrentLimit; ///< Vrm Maximum Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_GFX_MAXIMUM_CURRENT_LIMIT} + IN UINT32 SviOcpLevel; ///< SVI OCP Level. + ///< @BldCfgItem{BLDCFG_VRM_SVI_OCP_LEVEL} + ///< @BldCfgItem{BLDCFG_VRM_NB_SVI_OCP_LEVEL} + ///< @BldCfgItem{BLDCFG_VRM_GFX_SVI_OCP_LEVEL} +} PLATFORM_VRM_CONFIGURATION; + +/// The VRM types to characterize. +typedef enum { + CoreVrm, ///< VDD plane. + NbVrm, ///< VDDNB plane. + GfxVrm, ///< GFX plane. + MaxVrmType ///< Not a valid VRM type, use for limit checking. +} PLATFORM_VRM_TYPE; + +/// The StapmBoost settings. +typedef enum { + StapmBoostDisabled, ///< Disable Stapm Boost + StapmBoostEnabled, ///< Enable Stapm Boost + StapmBoostSystemConfig ///< Default setting uses IRM programming setting +} STAPM_BOOST_TYPE; + + +/// These to specify how the system is to be configured for STAPM +typedef struct { + IN UINT32 CfgStapmScalar; ///< Specify a % scalar to adjust this. Leave this unused for now until it is figured out. + ///< @BldCfgItem{BLDCFG_STAPM_SCALAR} + IN UINT32 CfgStapmBoost; ///< If STAPM boost is enabled. System will actively track skin temperature and will allow higher performance till Skin temperature is below the limit + ///< @BldCfgItem{BLDCFG_STAPM_BOOST} + IN UINT32 CfgStapmTimeConstant; ///< Maximum power that the APU is allowed to consume when STAPM is enabled and Skin temperature is below the limit. + ///< Specified time in seconds. + ///< @BldCfgItem{BLDCFG_STAPM_TIME_CONSTANT} +} PLATFORM_STAPM_CONFIGURATION; + +/// FCH Platform Configuration Policy +typedef struct { + IN UINT16 CfgSmbus0BaseAddress; ///< SMBUS0 Controller Base Address + IN UINT16 CfgSmbus1BaseAddress; ///< SMBUS1 Controller Base Address + IN UINT16 CfgSioPmeBaseAddress; ///< I/O base address for LPC I/O target range + IN UINT16 CfgAcpiPm1EvtBlkAddr; ///< I/O base address of ACPI power management Event Block + IN UINT16 CfgAcpiPm1CntBlkAddr; ///< I/O base address of ACPI power management Control Block + IN UINT16 CfgAcpiPmTmrBlkAddr; ///< I/O base address of ACPI power management Timer Block + IN UINT16 CfgCpuControlBlkAddr; ///< I/O base address of ACPI power management CPU Control Block + IN UINT16 CfgAcpiGpe0BlkAddr; ///< I/O base address of ACPI power management General Purpose Event Block + IN UINT16 CfgSmiCmdPortAddr; ///< I/O base address of ACPI SMI Command Block + IN UINT16 CfgAcpiPmaCntBlkAddr; ///< I/O base address of ACPI power management additional control block + IN UINT32 CfgGecShadowRomBase; ///< 32-bit base address to the GEC shadow ROM + IN UINT32 CfgWatchDogTimerBase; ///< Watchdog Timer base address + IN UINT32 CfgSpiRomBaseAddress; ///< Base address for the SPI ROM controller + IN UINT32 CfgHpetBaseAddress; ///< HPET MMIO base address + IN UINT32 CfgAzaliaSsid; ///< Subsystem ID of HD Audio controller + IN UINT32 CfgSmbusSsid; ///< Subsystem ID of SMBUS controller + IN UINT32 CfgIdeSsid; ///< Subsystem ID of IDE controller + IN UINT32 CfgSataAhciSsid; ///< Subsystem ID of SATA controller in AHCI mode + IN UINT32 CfgSataIdeSsid; ///< Subsystem ID of SATA controller in IDE mode + IN UINT32 CfgSataRaid5Ssid; ///< Subsystem ID of SATA controller in RAID5 mode + IN UINT32 CfgSataRaidSsid; ///< Subsystem ID of SATA controller in RAID mode + IN UINT32 CfgEhciSsid; ///< Subsystem ID of EHCI + IN UINT32 CfgOhciSsid; ///< Subsystem ID of OHCI + IN UINT32 CfgLpcSsid; ///< Subsystem ID of LPC ISA Bridge + IN UINT32 CfgSdSsid; ///< Subsystem ID of SecureDigital controller + IN UINT32 CfgXhciSsid; ///< Subsystem ID of XHCI + IN BOOLEAN CfgFchPort80BehindPcib; ///< Is port80 cycle going to the PCI bridge + IN BOOLEAN CfgFchEnableAcpiSleepTrap; ///< ACPI sleep SMI enable/disable + IN GPP_LINKMODE CfgFchGppLinkConfig; ///< GPP link configuration + IN BOOLEAN CfgFchGppPort0Present; ///< Is FCH GPP port 0 present + IN BOOLEAN CfgFchGppPort1Present; ///< Is FCH GPP port 1 present + IN BOOLEAN CfgFchGppPort2Present; ///< Is FCH GPP port 2 present + IN BOOLEAN CfgFchGppPort3Present; ///< Is FCH GPP port 3 present + IN BOOLEAN CfgFchGppPort0HotPlug; ///< Is FCH GPP port 0 hotplug capable + IN BOOLEAN CfgFchGppPort1HotPlug; ///< Is FCH GPP port 1 hotplug capable + IN BOOLEAN CfgFchGppPort2HotPlug; ///< Is FCH GPP port 2 hotplug capable + IN BOOLEAN CfgFchGppPort3HotPlug; ///< Is FCH GPP port 3 hotplug capable + + IN UINT8 CfgFchEsataPortBitMap; ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable + IN UINT8 CfgFchIrPinControl; ///< Register bitfield describing Infrared Pin Control: + ///< [0] - IR Enable 0 + ///< [1] - IR Enable 1 + ///< [2] - IR Tx0 + ///< [3] - IR Tx1 + ///< [4] - IR Open Drain + ///< [5] - IR Enable LED + IN SD_CLOCK_CONTROL CfgFchSdClockControl; ///< FCH SD Clock Control + IN SCI_MAP_CONTROL *CfgFchSciMapControl; ///< FCH SCI Mapping Control + IN SATA_PHY_CONTROL *CfgFchSataPhyControl; ///< FCH SATA PHY Control + IN GPIO_CONTROL *CfgFchGpioControl; ///< FCH GPIO Control + IN BOOLEAN CfgFchRtcWorkAround; ///< FCH RTC Workaround + IN BOOLEAN CfgFchUsbPortDisWorkAround; ///< FCH USB Workaround +} FCH_PLATFORM_POLICY; + + +/// Build Option/Configuration Boolean Structure. +typedef struct { + IN AMD_CODE_HEADER VersionString; ///< AMD embedded code version string + + //Build Option Area + IN BOOLEAN OptionUDimms; ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT" + IN BOOLEAN OptionRDimms; ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT" + IN BOOLEAN OptionLrDimms; ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT" + IN BOOLEAN OptionEcc; ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT" + IN BOOLEAN OptionBankInterleave; ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE" + IN BOOLEAN OptionDctInterleave; ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE" + IN BOOLEAN OptionNodeInterleave; ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE" + IN BOOLEAN OptionParallelTraining; ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING" + IN BOOLEAN OptionOnlineSpare; ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT" + IN BOOLEAN OptionMemRestore; ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT" + IN BOOLEAN OptionAcpiPstates; ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES" + IN BOOLEAN OptionCrat; ///< @ref BLDOPT_REMOVE_CRAT "BLDOPT_REMOVE_CRAT" + IN BOOLEAN OptionCdit; ///< @ref BLDOPT_REMOVE_CDIT "BLDOPT_REMOVE_CDIT" + IN BOOLEAN OptionWhea; ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA" + IN BOOLEAN OptionDmi; ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI" + IN BOOLEAN OptionEarlySamples; ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES" + IN BOOLEAN OptionAddrToCsTranslator; ///< ADDR_TO_CS_TRANSLATOR + + //Build Configuration Area + IN UINT64 CfgPciMmioAddress; ///< Pci Mmio Base Address to use for PCI Config accesses. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE} + IN UINT32 CfgPciMmioSize; ///< Pci Mmio region Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE} + IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN UINT32 CfgCpuFrequencyLimit; ///< CPU frequency limit + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< Enable or disable connected standby + IN UINT32 CfgPlatNumIoApics; ///< The number of IO APICS for the platform. + IN UINT32 CfgMemInitPstate; ///< Memory Init Pstate. + IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used. + IN UINT32 CfgPlatformCStateOpData; ///< An IO port or additional C-State setup data, depends on C-State mode. + IN UINT16 CfgPlatformCStateIoBaseAddress; ///< Specifies I/O ports that can be used to allow CPU to enter CStates + IN PLATFORM_CPB_MODES CfgPlatformCpbMode; ///< Enable or disable core performance boost + IN UINT32 CfgCoreLevelingMode; ///< Apply any downcoring or core count leveling as specified. + IN PERFORMANCE_PROFILE CfgPerformanceProfile; ///< The platform's control flow mode and platform performance settings. + + IN UINT32 CfgAmdPlatformType; ///< Designate the platform as a Server, Desktop, or Mobile. + IN UINT32 CfgAmdPowerCeiling; ///< PowerCeiling, specifies a maximum power usage limit for the platform + IN UINT16 CfgHtcTemperatureLimit; ///< Hardware Thermal Control temperature limit in tenths of degrees Celsius. + IN UINT16 CfgLhtcTemperatureLimit; ///< Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + + IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT} + IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED} + IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE} + IN UINT32 CfgMemoryQuadrankType; ///< Memory Quadrank Type. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE} + IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable. + IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable. + IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable. + IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE} + IN BOOLEAN CfgLimitMemoryToBelow1Tb; ///< Limit memory address space to below 1TB + IN BOOLEAN CfgMemoryEnableBankSwapOnly; ///< Memory Enable Bank Swap Only @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_SWAP_ONLY} + IN BOOLEAN CfgMemoryEnableBankInterleaving; ///< Memory Enable Bank Interleaving. + IN BOOLEAN CfgMemoryEnableNodeInterleaving; ///< Memory Enable Node Interleaving. + IN BOOLEAN CfgMemoryChannelInterleaving; ///< Memory Channel Interleaving. + IN BOOLEAN CfgMemoryPowerDown; ///< Memory Power Down. + IN UINT8 CfgMemoryMacDefault; ///< Memory DRAM MAC Default + IN BOOLEAN CfgMemoryExtendedTemperatureRange; ///< Memory Extended Temperature Range + IN UINT32 CfgPowerDownMode; ///< Power Down Mode. + IN BOOLEAN CfgOnlineSpare; ///< Online Spare. + IN BOOLEAN CfgMemoryParityEnable; ///< Memory Parity Enable. + IN BOOLEAN CfgBankSwizzle; ///< Bank Swizzle. + IN UINT32 CfgTimingModeSelect; ///< Timing Mode Select. + IN UINT32 CfgMemoryClockSelect; ///< Memory Clock Select. + IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL} + IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM} + IN BOOLEAN CfgUseBurstMode; ///< Use Burst Mode. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE} + IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON} + IN BOOLEAN CfgDdrPhyDllBypassMode; ///< Enable DllPDBypassMode + IN BOOLEAN CfgEnableEccFeature; ///< Enable ECC Feature. + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION} + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE} + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE} + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE} + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE} + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE} + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD} + IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE} + IN UINT64 CfgHeapDramAddress; ///< Heap contents will be temporarily stored in this address during the transition. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS} + IN BOOLEAN CfgNodeMem1GBAlign; ///< Node Mem 1GB boundary Alignment + IN BOOLEAN CfgS3LateRestore; ///< S3 Late Restore + IN BOOLEAN CfgAcpiPstateIndependent; ///< PSD method dependent/Independent + IN UINT32 CfgAcpiPstatesPsdPolicy; ///< PSD policy + IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList; ///< The AP's MTRR settings before final halt + ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST} + IN UMA_VERSION CfgUmaVersion; ///< Uma Version + IN UMA_MODE CfgUmaMode; ///< Uma Mode + IN UINT32 CfgUmaSize; ///< Uma Size [31:0]=Addr[47:16] + IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support + IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment + IN BOOLEAN CfgProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + IN CHAR8 CfgProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + IN CHAR8 CfgProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + IN UINT8 CfgGnbHdAudio; ///< GNB HD Audio + IN UINT8 CfgAbmSupport; ///< Abm Support + IN UINT8 CfgDynamicRefreshRate; ///< DRR Dynamic Refresh Rate + IN UINT16 CfgLcdBackLightControl; ///< LCD Backlight Control + IN UINT8 CfgGnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + IN UINT32 CfgTempPcieMmioBaseAddress; ///< Temp pcie MMIO base Address + ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS} + IN UINT32 CfgGnbIGPUSSID; ///< Gnb internal GPU SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID} + IN UINT32 CfgGnbHDAudioSSID; ///< Gnb HD Audio SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID} + IN UINT32 CfgGnbPcieSSID; ///< Gnb PCIe SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID} + IN UINT16 CfgLvdsSpreadSpectrum; ///< Lvds Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 CfgLvdsSpreadSpectrumRate; ///< Lvds Spread Spectrum Rate + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN FCH_PLATFORM_POLICY *FchBldCfg; ///< FCH platform build configuration policy + + IN BOOLEAN CfgIommuSupport; ///< IOMMU support + IN UINT8 CfgLvdsPowerOnSeqDigonToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToDigon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing + IN UINT16 CfgLvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported + IN UINT32 CfgLcdBitDepthControlValue; ///< The LCD bit depth control settings + IN UINT8 CfgLvds24bbpPanelMode; ///< The LVDS 24 BBP mode + IN LVDS_MISC_CONTROL CfgLvdsMiscControl; ///< THe LVDS Misc control + IN UINT16 CfgPcieRefClkSpreadSpectrum; ///< PCIe Reference Clock Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN CfgExternalVrefCtlFeature; ///< External Vref control + IN FORCE_TRAIN_MODE CfgForceTrainMode; ///< Force Train Mode + IN BOOLEAN CfgGnbRemoteDisplaySupport; ///< Wireless Display Support + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList; + IN BOOLEAN CfgGnbSyncFloodPinAsNmi; ///< @ref BLDCFG_USE_SYNCFLOOD_AS_NMI "BLDCFG_USE_SYNCFLOOD_AS_NMI" + IN UINT8 CfgIgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use current default + ///< @li 2 = Disable iGPU if ANY PCI or PCIe Graphics card is present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} + IN UINT8 CfgGnbSwTjOffset; ///< Software-writeable TjOffset to account for changes in junction temperature + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GNB_THERMAL_SENSOR_CORRECTION} + IN UINT8 CfgLvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< Build-time customizable only - @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL CfgDisplayMiscControl; ///< The Display Misc control + IN DP_FIXED_VOLT_SWING_TYPE CfgDpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + IN BOOLEAN CfgHybridBoostEnable; ///< HyBrid Boost support + ///< @BldCfgItem{BLDCFG_HYBRID_BOOST_ENABLE} + IN UINT64 CfgGnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} + IN BOOLEAN CfgDataEyeEn; ///< Enable get 2D Data Eye + IN UINT32 CfgBatteryBoostTune; ///< @BldCfgItem{BLDCFG_BATTERY_BOOST_TUNE} + IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate + IN DISPLAY_RESOLUTION CfgGnbResolution; ///< Display Resolution + ///< @BldCfgItem{BLDCFG_RESOLUTION} + IN ACP_SIZE CfgGnbAcpSize; ///< ACP size [31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} + IN PMU_TRAIN_MODE CfgPmuTrainMode; ///< Force Train Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + IN UINT8 CfgMemoryPhyVoltage; ///< Memory Phy voltage (VDDR) + ///< @BldCfgItem{BLDCFG_MEMORY_PHY_VOLTAGE} + IN UINT32 CfgGpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} + IN UINT8 CfgMaxNumAudioEndpoints; ///< @BldCfgItem{BLDCFG_MAX_NUM_AUDIO_ENDPOINTS} + IN BOOLEAN CfgBapmEnable; ///< @BldCfgItem{BLDCFG_BAPM_ENABLE} + IN UINT32 CfgGnbAzI2sBusSelect; ///< Acp AZ/I2sBus select + ///< @BldCfgItem{BLDCFG_GNB_AZ_I2SBUS_SELECT} + IN UINT32 CfgGnbAzI2sBusPinConfig; ///< Acp AZ/I2sBus pin configuration + ///< @BldCfgItem{BLDCFG_GNB_AZ_I2SBUS_PIN_CONFIG} + IN UINT32 CfgPkgPwrLimitAC; ///< Package Power Limit under AC + ///< @BldCfgItem{BLDCFG_PPT_LIMIT_AC} + IN UINT32 CfgPkgPwrLimitDC; ///< Package Power Limit under DC + ///< @BldCfgItem{BLDCFG_PPT_LIMIT_DC} + IN UINT32 CfgSystemConfiguration; ///< SMU System Configuration + ///< @BldCfgItem{BLDCFG_SYSTEM_CONFIGURATION} + IN PLATFORM_STAPM_CONFIGURATION CfgPlatStapmConfig; ///< Several configuration settings for the STAPM. + IN UINT8 CfgEDPv1_4VSMode; ///< @BldCfgItem{BLDCFG_EDP_V1_4_VS_MODE} + IN UINT8 CfgExtHDMIReDrvSlvAddr; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_SLAVE_ADDR} + IN UINT8 CfgExtHDMIReDrvRegNum; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_REG_NUM} + IN UINT64 CfgExtHDMIRegSetting; ///< @BldCfgItem{BLDCFG_EXT_HDMI_RE_DRIVE_REG_INFO} + IN UINT32 CfgThermCtlLimit; ///< @BldCfgItem{BLDCFG_THERMCTL_LIMIT} + IN UINT32 CfgCodecVerbTable; ///< @BldCfgItem{BLDCFG_CODEC_VERB_TABLE} + IN UINT32 CfgGnbAzSsid; ///< @BldCfgItem{BLDCFG_GNB_AZ_SSID} + IN UINT16 CfgCustomVddioVoltage; ///< Custom VDDIO voltage + ///< @BldCfgItem{BLDCFG_CUSTOM_VDDIO_VOLTAGE} + IN BOOLEAN CfgAcpPowerGating; ///< @BldCfgItem{BLDCFG_ACP_POWER_GATING} + IN BOOLEAN Reserved; ///< reserved... +} BUILD_OPT_CFG; + +/// A structure containing platform specific operational characteristics. This +/// structure is initially populated by the initializer with a copy of the same +/// structure that was created at build time using the build configuration controls. +typedef struct _PLATFORM_CONFIGURATION { + IN PERFORMANCE_PROFILE PlatformProfile; ///< Several configuration settings for the processor. + IN UINT8 CoreLevelingMode; ///< Indicates how to balance the number of cores per processor. + ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE} + IN PLATFORM_CSTATE_MODES CStateMode; ///< Specifies the method of C-State enablement - Disabled, or C6. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE} + IN UINT32 CStatePlatformData; ///< This element specifies some pertinent data needed for the operation of the Cstate feature + ///< If CStateMode is CStateModeC6, this item is reserved + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA} + IN UINT16 CStateIoBaseAddress; ///< This item specifies a free block of 8 consecutive bytes of I/O ports that + ///< can be used to allow the CPU to enter Cstates. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS} + IN PLATFORM_CPB_MODES CpbMode; ///< Specifies the method of core performance boost enablement - Disabled, or Auto. + ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE} + IN BOOLEAN UserOptionDmi; ///< When set to TRUE, the DMI data table is generated. + IN BOOLEAN UserOptionPState; ///< When set to TRUE, the PState data tables are generated. + IN BOOLEAN UserOptionCrat; ///< When set to TRUE, the CRAT data table is generated. + IN BOOLEAN UserOptionCdit; ///< When set to TRUE, the CDIT data table is generated. + IN BOOLEAN UserOptionWhea; ///< When set to TRUE, the WHEA data table is generated. + IN UINT32 PowerCeiling; ///< P-State Ceiling Enabling Deck - Max power milli-watts. + IN BOOLEAN ForcePstateIndependent; ///< Deprecated in favor of PstatesPsdPolicy. + ///< P-State _PSD is forced independent. + ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT} + IN UINT32 PstatesPsdPolicy; ///< PSD policy + ///< @BldCfgItem{BLDCFG_ACPI_PSTATES_PSD_POLICY} + IN UINT32 CpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_CPU_FREQUENCY_LIMIT} + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< @BldCfgItem{BLDCFG_CPU_CONNECTED_STANDBY_MODE} + IN UINT32 NumberOfIoApics; ///< Number of I/O APICs in the system + ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS} + IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN BOOLEAN ProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB} + IN CHAR8 ProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0} + IN CHAR8 ProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1} + IN UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output), + ///< essentially it enables function 1 of graphics device. + ///< @li 0 = HD Audio disable + ///< @li 1 = HD Audio enable + ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO} + IN UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is + ///< characteristic specific to display panel which used by platform design. + ///< @li 0 = ABM support disabled + ///< @li 1 = ABM support enabled + ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT} + IN UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP. + ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE} + IN UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control. + ///< If equal to 0 backlight not controlled by iGPU + ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL} + IN UINT16 HtcTemperatureLimit; ///< The Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_HTC_TEMPERATURE_LIMIT} + IN UINT16 LhtcTemperatureLimit; ///< The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_LHTC_TEMPERATURE_LIMIT} + IN DISPLAY_RESOLUTION Resolution; ///< Display Resolution + ///< @BldCfgItem{BLDCFG_RESOLUTION} + IN ACP_SIZE AcpSize; ///< The size of ACP dram + ///< ACP_Size[31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} + IN UINT32 BatteryBoostTune; ///< @BldCfgItem{BLDCFG_BATTERY_BOOST_TUNE} + IN UINT32 PkgPwrLimitAC; ///< Package Power Limit under AC + ///< @BldCfgItem{BLDCFG_PPT_LIMIT_AC} + IN UINT32 PkgPwrLimitDC; ///< Package Power Limit under DC + ///< @BldCfgItem{BLDCFG_PPT_LIMIT_DC} + IN UINT32 SystemConfiguration; ///< SMU System Configuration + ///< @BldCfgItem{BLDCFG_SYSTEM_CONFIGURATION} + IN PLATFORM_STAPM_CONFIGURATION PlatStapmConfig; ///< Several configuration settings for the STAPM. + IN UINT32 ThermCtlLimit; ///< @BldCfgItem{BLDCFG_THERMCTL_LIMIT} + IN UINT64 AzaliaCodecVerbTable; ///< @BldCfgItem{BLDCFG_CODEC_VERB_TABLE} + IN UINT32 AzaliaSsid; ///< @BldCfgItem{BLDCFG_GNB_AZ_SSID} + IN UINT32 GnbAzI2sBusSelect; ///< @BldCfgItem{BLDCFG_GNB_AZ_I2SBUS_SELECT} + IN UINT32 GnbAzI2sBusPinConfig; ///< @BldCfgItem{BLDCFG_GNB_AZ_I2SBUS_PIN_CONFIG} + IN BOOLEAN AcpPowerGating; ///< @BldCfgItem{BLDCFG_ACP_POWER_GATING} +} PLATFORM_CONFIGURATION; + + +/********************************************************************** + * Structures for: AmdInitLate + **********************************************************************/ +#define PROC_VERSION_LENGTH 48 +#define MAX_DIMMS_PER_SOCKET 16 +#define PROC_MANU_LENGTH 29 + +/* Interface Parameter Structures */ +/// DMI Type4 - Processor ID +typedef struct { + OUT UINT32 ProcIdLsd; ///< Lower half of 64b ID + OUT UINT32 ProcIdMsd; ///< Upper half of 64b ID +} TYPE4_PROC_ID; + +/// DMI Type 4 - Processor information +typedef struct { + OUT UINT8 T4ProcType; ///< CPU Type + OUT UINT8 T4ProcFamily; ///< Family 1 + OUT TYPE4_PROC_ID T4ProcId; ///< Id + OUT UINT8 T4Voltage; ///< Voltage + OUT UINT16 T4ExternalClock; ///< External clock + OUT UINT16 T4MaxSpeed; ///< Max speed + OUT UINT16 T4CurrentSpeed; ///< Current speed + OUT UINT8 T4Status; ///< Status + OUT UINT8 T4ProcUpgrade; ///< Up grade + OUT UINT8 T4CoreCount; ///< Core count + OUT UINT8 T4CoreEnabled; ///< Core Enable + OUT UINT8 T4ThreadCount; ///< Thread count + OUT UINT16 T4ProcCharacteristics; ///< Characteristics + OUT UINT16 T4ProcFamily2; ///< Family 2 + OUT CHAR8 T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version + OUT CHAR8 T4ProcManufacturer[PROC_MANU_LENGTH]; ///< Manufacturer +} TYPE4_DMI_INFO; + +/// DMI Type 7 - Cache information +typedef struct _TYPE7_DMI_INFO { + OUT UINT16 T7CacheCfg; ///< Cache cfg + OUT UINT16 T7MaxCacheSize; ///< Max size + OUT UINT16 T7InstallSize; ///< Install size + OUT UINT16 T7SupportedSramType; ///< Supported Sram Type + OUT UINT16 T7CurrentSramType; ///< Current type + OUT UINT8 T7CacheSpeed; ///< Speed + OUT UINT8 T7ErrorCorrectionType; ///< ECC type + OUT UINT8 T7SystemCacheType; ///< Cache type + OUT UINT8 T7Associativity; ///< Associativity +} TYPE7_DMI_INFO; + +/// DMI Type 16 offset 04h - Location +typedef enum { + OtherLocation = 0x01, ///< Assign 01 to Other + UnknownLocation, ///< Assign 02 to Unknown + SystemboardOrMotherboard, ///< Assign 03 to systemboard or motherboard + IsaAddonCard, ///< Assign 04 to ISA add-on card + EisaAddonCard, ///< Assign 05 to EISA add-on card + PciAddonCard, ///< Assign 06 to PCI add-on card + McaAddonCard, ///< Assign 07 to MCA add-on card + PcmciaAddonCard, ///< Assign 08 to PCMCIA add-on card + ProprietaryAddonCard, ///< Assign 09 to proprietary add-on card + NuBus, ///< Assign 0A to NuBus + Pc98C20AddonCard, ///< Assign 0A0 to PC-98/C20 add-on card + Pc98C24AddonCard, ///< Assign 0A1 to PC-98/C24 add-on card + Pc98EAddoncard, ///< Assign 0A2 to PC-98/E add-on card + Pc98LocalBusAddonCard ///< Assign 0A3 to PC-98/Local bus add-on card +} DMI_T16_LOCATION; + +/// DMI Type 16 offset 05h - Memory Error Correction +typedef enum { + OtherUse = 0x01, ///< Assign 01 to Other + UnknownUse, ///< Assign 02 to Unknown + SystemMemory, ///< Assign 03 to system memory + VideoMemory, ///< Assign 04 to video memory + FlashMemory, ///< Assign 05 to flash memory + NonvolatileRam, ///< Assign 06 to non-volatile RAM + CacheMemory ///< Assign 07 to cache memory +} DMI_T16_USE; + +/// DMI Type 16 offset 07h - Maximum Capacity +typedef enum { + Dmi16OtherErrCorrection = 0x01, ///< Assign 01 to Other + Dmi16UnknownErrCorrection, ///< Assign 02 to Unknown + Dmi16NoneErrCorrection, ///< Assign 03 to None + Dmi16Parity, ///< Assign 04 to parity + Dmi16SingleBitEcc, ///< Assign 05 to Single-bit ECC + Dmi16MultiBitEcc, ///< Assign 06 to Multi-bit ECC + Dmi16Crc ///< Assign 07 to CRC +} DMI_T16_ERROR_CORRECTION; + +/// DMI Type 16 - Physical Memory Array +typedef struct { + OUT DMI_T16_LOCATION Location; ///< The physical location of the Memory Array, + ///< whether on the system board or an add-in board. + OUT DMI_T16_USE Use; ///< Identifies the function for which the array + ///< is used. + OUT DMI_T16_ERROR_CORRECTION MemoryErrorCorrection; ///< The primary hardware error correction or + ///< detection method supported by this memory array. + OUT UINT16 NumberOfMemoryDevices; ///< The number of slots or sockets available + ///< for memory devices in this array. +} TYPE16_DMI_INFO; + +/// DMI Type 17 offset 0Eh - Form Factor +typedef enum { + OtherFormFactor = 0x01, ///< Assign 01 to Other + UnknowFormFactor, ///< Assign 02 to Unknown + SimmFormFactor, ///< Assign 03 to SIMM + SipFormFactor, ///< Assign 04 to SIP + ChipFormFactor, ///< Assign 05 to Chip + DipFormFactor, ///< Assign 06 to DIP + ZipFormFactor, ///< Assign 07 to ZIP + ProprietaryCardFormFactor, ///< Assign 08 to Proprietary Card + DimmFormFactorFormFactor, ///< Assign 09 to DIMM + TsopFormFactor, ///< Assign 10 to TSOP + RowOfChipsFormFactor, ///< Assign 11 to Row of chips + RimmFormFactor, ///< Assign 12 to RIMM + SodimmFormFactor, ///< Assign 13 to SODIMM + SrimmFormFactor, ///< Assign 14 to SRIMM + FbDimmFormFactor ///< Assign 15 to FB-DIMM +} DMI_T17_FORM_FACTOR; + +/// DMI Type 17 offset 12h - Memory Type +typedef enum { + OtherMemType = 0x01, ///< Assign 01 to Other + UnknownMemType, ///< Assign 02 to Unknown + DramMemType, ///< Assign 03 to DRAM + EdramMemType, ///< Assign 04 to EDRAM + VramMemType, ///< Assign 05 to VRAM + SramMemType, ///< Assign 06 to SRAM + RamMemType, ///< Assign 07 to RAM + RomMemType, ///< Assign 08 to ROM + FlashMemType, ///< Assign 09 to Flash + EepromMemType, ///< Assign 10 to EEPROM + FepromMemType, ///< Assign 11 to FEPROM + EpromMemType, ///< Assign 12 to EPROM + CdramMemType, ///< Assign 13 to CDRAM + ThreeDramMemType, ///< Assign 14 to 3DRAM + SdramMemType, ///< Assign 15 to SDRAM + SgramMemType, ///< Assign 16 to SGRAM + RdramMemType, ///< Assign 17 to RDRAM + DdrMemType, ///< Assign 18 to DDR + Ddr2MemType, ///< Assign 19 to DDR2 + Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM + Ddr3MemType = 0x18, ///< Assign 24 to DDR3 + Fbd2MemType ///< Assign 25 to FBD2 +} DMI_T17_MEMORY_TYPE; + +/// DMI Type 17 offset 13h - Type Detail +typedef struct { + OUT UINT16 Reserved1:1; ///< Reserved + OUT UINT16 Other:1; ///< Other + OUT UINT16 Unknown:1; ///< Unknown + OUT UINT16 FastPaged:1; ///< Fast-Paged + OUT UINT16 StaticColumn:1; ///< Static column + OUT UINT16 PseudoStatic:1; ///< Pseudo-static + OUT UINT16 Rambus:1; ///< RAMBUS + OUT UINT16 Synchronous:1; ///< Synchronous + OUT UINT16 Cmos:1; ///< CMOS + OUT UINT16 Edo:1; ///< EDO + OUT UINT16 WindowDram:1; ///< Window DRAM + OUT UINT16 CacheDram:1; ///< Cache Dram + OUT UINT16 NonVolatile:1; ///< Non-volatile + OUT UINT16 Registered:1; ///< Registered (Buffered) + OUT UINT16 Unbuffered:1; ///< Unbuffered (Unregistered) + OUT UINT16 Reserved2:1; ///< Reserved +} DMI_T17_TYPE_DETAIL; + +/// DMI Type 17 - Memory Device +typedef struct { + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceSet; ///< Identifies when the Memory Device is one of a set of + ///< Memory Devices that must be populated with all devices of + ///< the same type and size, and the set to which this device belongs. + OUT CHAR8 DeviceLocator[8]; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT CHAR8 BankLocator[10]; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT DMI_T17_MEMORY_TYPE MemoryType; ///< The type of memory used in this device. + OUT DMI_T17_TYPE_DETAIL TypeDetail; ///< Additional detail on the memory device type + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT CHAR8 SerialNumber[9]; ///< Serial Number. + OUT CHAR8 PartNumber[19]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed + OUT UINT16 MinimumVoltage; ///< Minimum operating voltage for this device, in millivolts + OUT UINT16 MaximumVoltage; ///< Maximum operating voltage for this device, in millivolts + OUT UINT16 ConfiguredVoltage; ///< Configured voltage for this device, in millivolts +} TYPE17_DMI_INFO; + +/// Memory DMI Type 17 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceLocator; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT UINT8 BankLocator; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT UINT8 SerialNumber[4]; ///< Serial Number. + OUT UINT8 PartNumber[18]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed + OUT UINT16 MinimumVoltage; ///< Minimum operating voltage for this device, in millivolts + OUT UINT16 MaximumVoltage; ///< Maximum operating voltage for this device, in millivolts + OUT UINT16 ConfiguredVoltage; ///< Configured voltage for this device, in millivolts +} MEM_DMI_PHYSICAL_DIMM_INFO; + +/// Memory DMI Type 20 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} MEM_DMI_LOGICAL_DIMM_INFO; + +/// DMI Type 19 - Memory Array Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, + ///< of a range of memory mapped to the + ///< specified physical memory array. + OUT UINT32 EndingAddr; ///< The physical ending address of the + ///< last kilobyte of a range of addresses + ///< mapped to the specified physical memory array. + OUT UINT16 MemoryArrayHandle; ///< The handle, or instance number, associated + ///< with the physical memory array to which this + ///< address range is mapped. + OUT UINT8 PartitionWidth; ///< Identifies the number of memory devices that + ///< form a single row of memory for the address + ///< partition defined by this structure. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. + OUT UINT64 ExtEndingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. +} TYPE19_DMI_INFO; + +///DMI Type 20 - Memory Device Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated + ///< with the Memory Array Mapped Address structure to + ///< which this device address range is mapped. + OUT UINT8 PartitionRowPosition; ///< Identifies the position of the referenced Memory + ///< Device in a row of the address partition. + OUT UINT8 InterleavePosition; ///< The position of the referenced Memory Device in + ///< an interleave. + OUT UINT8 InterleavedDataDepth; ///< The maximum number of consecutive rows from the + ///< referenced Memory Device that are accessed in a + ///< single interleaved transfer. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} TYPE20_DMI_INFO; + +/// Collection of pointers to the DMI records +typedef struct { + OUT TYPE4_DMI_INFO T4[MAX_SOCKETS_SUPPORTED]; ///< Type 4 struc + OUT TYPE7_DMI_INFO T7L1[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 1 + OUT TYPE7_DMI_INFO T7L2[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 2 + OUT TYPE7_DMI_INFO T7L3[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 3 + OUT TYPE16_DMI_INFO T16; ///< Type 16 struc + OUT TYPE17_DMI_INFO T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc + OUT TYPE19_DMI_INFO T19; ///< Type 19 struc + OUT TYPE20_DMI_INFO T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc +} DMI_INFO; + +/********************************************************************** + * Interface call: AllocateExecutionCache + **********************************************************************/ +#define MAX_CACHE_REGIONS 3 + +/// AllocateExecutionCache sub param structure for cached memory region +typedef struct { + IN OUT UINT32 ExeCacheStartAddr; ///< Start address + IN OUT UINT32 ExeCacheSize; ///< Size +} EXECUTION_CACHE_REGION; + +/********************************************************************** + * Interface call: AmdGetAvailableExeCacheSize + **********************************************************************/ +/// Get available Cache remain +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 AvailableExeCacheSize; ///< Remain size +} AMD_GET_EXE_SIZE_PARAMS; + +AGESA_STATUS +AmdGetAvailableExeCacheSize ( + IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams + ); + +/// Selection type for core leveling +typedef enum { + CORE_LEVEL_LOWEST, ///< Level to lowest common denominator + CORE_LEVEL_TWO, ///< Level to 2 cores + CORE_LEVEL_POWER_OF_TWO, ///< Level to 1,2,4 or 8 + CORE_LEVEL_NONE, ///< Do no leveling + CORE_LEVEL_COMPUTE_UNIT, ///< Level cores to one core per compute unit + CORE_LEVEL_COMPUTE_UNIT_TWO, ///< Level cores to two cores per compute unit + CORE_LEVEL_COMPUTE_UNIT_THREE, ///< Level cores to three cores per compute unit + CORE_LEVEL_ONE, ///< Level to 1 core + CORE_LEVEL_THREE, ///< Level to 3 cores + CORE_LEVEL_FOUR, ///< Level to 4 cores + CORE_LEVEL_FIVE, ///< Level to 5 cores + CORE_LEVEL_SIX, ///< Level to 6 cores + CORE_LEVEL_SEVEN, ///< Level to 7 cores + CORE_LEVEL_EIGHT, ///< Level to 8 cores + CORE_LEVEL_NINE, ///< Level to 9 cores + CORE_LEVEL_TEN, ///< Level to 10 cores + CORE_LEVEL_ELEVEN, ///< Level to 11 cores + CORE_LEVEL_TWELVE, ///< Level to 12 cores + CORE_LEVEL_THIRTEEN, ///< Level to 13 cores + CORE_LEVEL_FOURTEEN, ///< Level to 14 cores + CORE_LEVEL_FIFTEEN, ///< Level to 15 cores + CoreLevelModeMax ///< Used for bounds checking +} CORE_LEVELING_TYPE; + + + + + +/************************************************************************ + * + * AGESA Basic Level interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +/// AmdInitReset param structure +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region + IN FCH_RESET_INTERFACE FchInterface; ///< Interface for FCH configuration +} AMD_RESET_PARAMS; + +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ); + + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +/// InitEarly param structure +/// +/// Provide defaults or customizations to each service performed in AmdInitEarly. +/// +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< Execution Map Interface + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_CONFIGURATION GnbConfig; ///< GNB configuration +} AMD_EARLY_PARAMS; + +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ); + + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +/// AmdInitPost param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN GNB_POST_CONFIGURATION GnbPostConfig; ///< GNB post param +} AMD_POST_PARAMS; + +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ); + + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +/// AmdInitEnv param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_ENV_CONFIGURATION GnbEnvConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_ENV_PARAMS; + +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ); + + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +/// AmdInitMid param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_MID_CONFIGURATION GnbMidConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_MID_PARAMS; + +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ); + + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +/// AmdInitLate param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *IvrsExclusionRangeList; ///< Pointer to array of exclusion ranges + OUT DMI_INFO *DmiTable; ///< DMI Interface + OUT VOID *AcpiPState; ///< Acpi Pstate SSDT Table + OUT VOID *AcpiWheaMce; ///< WHEA MCE Table + OUT VOID *AcpiWheaCmc; ///< WHEA CMC Table + OUT VOID *AcpiAlib; ///< ACPI SSDT table with ALIB implementation + OUT VOID *AcpiIvrs; ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table + OUT VOID *AcpiCrat; ///< Component Resource Affinity Table table + OUT VOID *AcpiCdit; ///< Component Locality Distance Information table + IN GNB_LATE_CONFIGURATION GnbLateConfiguration; ///< GNB configuration +} AMD_LATE_PARAMS; + +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ); + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +/// CPU Recovery Parameters +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. +} AMD_CPU_RECOVERY_PARAMS; + +/// AmdInitRecovery param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region. And the max cache region is 3 + IN AMD_CPU_RECOVERY_PARAMS CpuRecoveryParams; ///< Params for CPU related recovery init. +} AMD_RECOVERY_PARAMS; + +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ); + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +/// AmdInitResume param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics + IN S3_DATA_BLOCK S3DataBlock; ///< Save state data +} AMD_RESUME_PARAMS; + +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ); + + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +/// AmdS3LateRestore param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics. + IN S3_DATA_BLOCK S3DataBlock; ///< Save state data +} AMD_S3LATE_PARAMS; + +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ); + + +/********************************************************************** + * Interface call: AmdS3FinalRestore + **********************************************************************/ +/// AmdS3FinalRestore param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics. + IN S3_DATA_BLOCK S3DataBlock; ///< Save state data +} AMD_S3FINAL_PARAMS; + +AGESA_STATUS +AmdS3FinalRestore ( + IN OUT AMD_S3FINAL_PARAMS *S3FinalParams + ); + +/********************************************************************** + * Interface call: AmdInitRtb + **********************************************************************/ +/// AmdInitRtb param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + OUT S3_DATA_BLOCK S3DataBlock; ///< Save state data + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_RTB_PARAMS; + +AGESA_STATUS +AmdInitRtb ( + IN OUT AMD_RTB_PARAMS *AmdInitRtbParams + ); + + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +/** + * Entry point for AP tasking. + */ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +); + +// +// General Services API +// + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +/// Request the APIC ID of a particular core. + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Core's Socket. + IN UINT8 Core; ///< The Core id. + OUT BOOLEAN IsPresent; ///< The Core is present, and ApicAddress is valid. + OUT UINT8 ApicAddress; ///< The Core's APIC ID. +} AMD_APIC_PARAMS; + +/** + * Get a specified Core's APIC ID. + */ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +); + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +/// Request the PCI Address of a Processor Module (that is, its Northbridge) + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Processor's socket + IN UINT8 Module; ///< The Module in that Processor + OUT BOOLEAN IsPresent; ///< The Core is present, and PciAddress is valid. + OUT PCI_ADDR PciAddress; ///< The Processor's PCI Config Space address (Function 0, Register 0) +} AMD_GET_PCI_PARAMS; + +/** + * Get Processor Module's PCI Config Space address. + */ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +); + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +/// Request the identity (Socket, Module, Core) of the current Processor Core + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT8 Socket; ///< The current Core's Socket + OUT UINT8 Module; ///< The current Core's Processor Module + OUT UINT8 Core; ///< The current Core's core id. +} AMD_IDENTIFY_PARAMS; + +/** + * "Who am I" for the current running core. + */ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +); + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +/// An Event Log Entry. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 EventClass; ///< The severity of this event, matches AGESA_STATUS. + OUT UINT32 EventInfo; ///< The unique event identifier, zero means "no event". + OUT UINT32 DataParam1; ///< Data specific to the Event. + OUT UINT32 DataParam2; ///< Data specific to the Event. + OUT UINT32 DataParam3; ///< Data specific to the Event. + OUT UINT32 DataParam4; ///< Data specific to the Event. +} EVENT_PARAMS; + +/** + * Read an Event from the Event Log. + */ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +); + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +/// Request the identity of dimm from system address + +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT64 MemoryAddress; ///< System Address that needs to be translated to dimm identification. + OUT UINT8 SocketId; ///< The socket on which the targeted address locates. + OUT UINT8 MemChannelId; ///< The channel on which the targeted address locates. + OUT UINT8 DimmId; ///< The dimm on which the targeted address locates. + OUT UINT8 ChipSelect; ///< The chip select on which the targeted address locates. + OUT UINT8 Bank; ///< The Bank for which the error address resides + OUT UINT32 Row; ///< The Row for which the error address resides + OUT UINT16 Column; ///< The Column for which the error address resides +} AMD_IDENTIFY_DIMM; + +/** + * Get the dimm identification for the address. + */ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +); + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ); + +/// Request the 2D Data Eye Training Data +#define RD_DATAEYE 0 +#define WR_DATAEYE 1 + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +/// Request the training data eye on Socket, Channel, Dimm. + +typedef struct _AMD_GET_DATAEYE { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT AMD_POST_PARAMS *PostParamsPtr; ///< Pointer to AMD_POST_PARAMS + IN UINT8 SocketId; ///< The socket number to get the 2D data eye + IN UINT8 MemChannelId; ///< The channel number to get the 2D data eye + IN UINT8 DimmId; ///< The dimm number to get the 2D data eye + IN UINT8 DataEyeType; ///< Get the 2D data eye on read or write training + OUT UINT8* DataEyeBuffer; ///< The buffer to stores the 2D data eye +} AMD_GET_DATAEYE; + +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ); + +#define AGESA_IDS_DFT_VAL 0xFFFF ///< Default value of every uninitlized NV item, the action for it will be ignored +#define AGESA_IDS_NV_END 0xFFFF ///< Flag specify end of option structure +/// WARNING: Don't change the comment below, it used as signature for script +/// AGESA IDS NV ID Definitions +typedef enum { + AGESA_IDS_EXT_ID_START = 0x0000,///< 0x0000 specify the start of external NV id + + AGESA_IDS_NV_UCODE, ///< 0x0001 Enable or disable microcode patching + + AGESA_IDS_NV_TARGET_PSTATE, ///< 0x0002 Set the P-state required to be activated + AGESA_IDS_NV_POSTPSTATE, ///< 0x0003 Set the P-state required to be activated through POST + + AGESA_IDS_NV_BANK_INTERLEAVE, ///< 0x0004 Enable or disable Bank Interleave + AGESA_IDS_NV_CHANNEL_INTERLEAVE, ///< 0x0005 Enable or disable Channel Interleave + AGESA_IDS_NV_NODE_INTERLEAVE, ///< 0x0006 Enable or disable Node Interleave + AGESA_IDS_NV_MEMHOLE, ///< 0x0007 Enables or disable memory hole + + AGESA_IDS_NV_SCRUB_REDIRECTION, ///< 0x0008 Enable or disable a write to dram with corrected data + AGESA_IDS_NV_DRAM_SCRUB, ///< 0x0009 Set the rate of background scrubbing for DRAM + AGESA_IDS_NV_DCACHE_SCRUB, ///< 0x000A Set the rate of background scrubbing for the DCache. + AGESA_IDS_NV_L2_SCRUB, ///< 0x000B Set the rate of background scrubbing for the L2 cache + AGESA_IDS_NV_L3_SCRUB, ///< 0x000C Set the rate of background scrubbing for the L3 cache + AGESA_IDS_NV_ICACHE_SCRUB, ///< 0x000D Set the rate of background scrubbing for the Icache + AGESA_IDS_NV_SYNC_ON_ECC_ERROR, ///< 0x000E Enable or disable the sync flood on un-correctable ECC error + AGESA_IDS_NV_ECC_SYMBOL_SIZE, ///< 0x000F Set ECC symbol size + + AGESA_IDS_NV_ALL_MEMCLKS, ///< 0x0010 Enable or disable all memory clocks enable + AGESA_IDS_NV_DCT_GANGING_MODE, ///< 0x0011 Set the Ganged mode + AGESA_IDS_NV_DRAM_BURST_LENGTH32, ///< 0x0012 Set the DRAM Burst Length 32 + AGESA_IDS_NV_MEMORY_POWER_DOWN, ///< 0x0013 Enable or disable Memory power down mode + AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE, ///< 0x0014 Set the Memory power down mode + AGESA_IDS_NV_DLL_SHUT_DOWN, ///< 0x0015 Enable or disable DLLShutdown + AGESA_IDS_NV_ONLINE_SPARE, ///< 0x0016 Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap + + AGESA_IDS_NV_HDTOUT, ///< 0x0017 Enable or disable HDTOUT feature + + AGESA_IDS_NV_GNBHDAUDIOEN, ///< 0x0018 Enable or disable GNB HD Audio + + AGESA_IDS_NV_CPB_EN, ///< 0x0019 Core Performance Boost + + AGESA_IDS_NV_HTC_EN, ///< 0x001A HTC Enable + AGESA_IDS_NV_HTC_OVERRIDE, ///< 0x001B HTC Override + AGESA_IDS_NV_HTC_PSTATE_LIMIT, ///< 0x001C HTC P-state limit select + AGESA_IDS_NV_HTC_TEMP_HYS, ///< 0x001D HTC Temperature Hysteresis + AGESA_IDS_NV_HTC_ACT_TEMP, ///< 0x001E HTC Activation Temp + + AGESA_IDS_NV_DRAMCON, ///< 0x001F Specify the mode for controller initialization + AGESA_IDS_NV_ALL_CKE, ///< 0x0020 Enable or disable all CKE + AGESA_IDS_NV_ALL_CS, ///< 0x0021 Enable or disable all CS + AGESA_IDS_NV_MSR_DE_CFG_BIT16, ///< 0x0022 Workaround GCC/C000005 issue for XV Core on CZ A0 + AGESA_IDS_EXT_ID_END, ///< 0x0023 specify the end of external NV ID +} IDS_EX_NV_ID; + + +#define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1) + + +#endif // _AGESA_H_ diff --git a/src/vendorcode/amd/pi/00660F01/AMD.h b/src/vendorcode/amd/pi/00660F01/AMD.h new file mode 100644 index 0000000000..aa68204e8d --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/AMD.h @@ -0,0 +1,476 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AMD_H_ +#define _AMD_H_ + +#define Int16FromChar(a,b) (UINT16)((a) << 0 | (b) << 8) +#define Int32FromChar(a,b,c,d) (UINT32)((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24) +#define Int64FromChar(a,b,c,d,e,f,g,h) ((UINT64)(Int32FromChar(a,b,c,d)<<32) | (UINT64)Int32FromChar(e,f,g,h)) + +#define AGESA_REVISION "Arch2008" +#define AGESA_ID {'A', 'G', 'E', 'S', 'A', 0x00, 0x00, 0x00} + +// +// +// AGESA Types and Definitions +// +// +#define LAST_ENTRY 0xFFFFFFFFul +#define IMAGE_SIGNATURE Int32FromChar ('$', 'A', 'M', 'D') +#define MODULE_SIGNATURE Int32FromChar ('$', 'M', 'O', 'D') +#define IOCF8 0xCF8 +#define IOCFC 0xCFC + +/// The return status for all AGESA public services. +/// +/// Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK +/// will have log entries with more detail. +/// +typedef enum { + AGESA_SUCCESS = 0, ///< The service completed normally. Info may be logged. + AGESA_UNSUPPORTED, ///< The dispatcher or create struct had an unimplemented function requested. + ///< Not logged. + AGESA_BOUNDS_CHK, ///< A dynamic parameter was out of range and the service was not provided. + ///< Example, memory address not installed, heap buffer handle not found. + ///< Not Logged. + // AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. + AGESA_ALERT, ///< An observed condition, but no loss of function. See Log. + AGESA_WARNING, ///< Possible or minor loss of function. See Log. + AGESA_ERROR, ///< Significant loss of function, boot may be possible. See Log. + AGESA_CRITICAL, ///< Continue boot only to notify user. See Log. + AGESA_FATAL, ///< Halt booting. See Log, however Fatal errors pertaining to heap problems + ///< may not be able to reliably produce log events. + AgesaStatusMax ///< Not a status, for limit checking. +} AGESA_STATUS; + +/// For checking whether a status is at or above the mandatory log level. +#define AGESA_STATUS_LOG_LEVEL AGESA_ALERT + +/** + * Callout method to the host environment. + * + * Callout using a dispatch with appropriate thunk layer, which is determined by the host environment. + * + * @param[in] Function The specific callout function being invoked. + * @param[in] FcnData Function specific data item. + * @param[in,out] ConfigPtr Reference to Callout params. + */ +typedef AGESA_STATUS (*CALLOUT_ENTRY) ( + IN UINT32 Function, + IN UINTN FcnData, + IN OUT VOID *ConfigPtr + ); + +typedef AGESA_STATUS (*IMAGE_ENTRY) (VOID *ConfigPtr); +typedef AGESA_STATUS (*MODULE_ENTRY) (VOID *ConfigPtr); + +///This allocation type is used by the AmdCreateStruct entry point +typedef enum { + PreMemHeap = 0, ///< Create heap in cache. + PostMemDram, ///< Create heap in memory. + ByHost ///< Create heap by Host. +} ALLOCATION_METHOD; + +/// These width descriptors are used by the library function, and others, to specify the data size +typedef enum ACCESS_WIDTH { + AccessWidthNone = 0, ///< dummy access width + AccessWidth8 = 1, ///< Access width is 8 bits. + AccessWidth16, ///< Access width is 16 bits. + AccessWidth32, ///< Access width is 32 bits. + AccessWidth64, ///< Access width is 64 bits. + + AccessS3SaveWidth8 = 0x81, ///< Save 8 bits data. + AccessS3SaveWidth16, ///< Save 16 bits data. + AccessS3SaveWidth32, ///< Save 32 bits data. + AccessS3SaveWidth64, ///< Save 64 bits data. +} ACCESS_WIDTH; + +/// AGESA struct name +typedef enum { + // AGESA BASIC FUNCTIONS + AMD_INIT_RECOVERY = 0x00021000, ///< AmdInitRecovery entry point handle + AMD_CREATE_STRUCT = 0x00022000, ///< AmdCreateStruct handle + AMD_INIT_EARLY = 0x00023000, ///< AmdInitEarly entry point handle + AMD_INIT_ENV = 0x00024000, ///< AmdInitEnv entry point handle + AMD_INIT_LATE = 0x00025000, ///< AmdInitLate entry point handle + AMD_INIT_MID = 0x00026000, ///< AmdInitMid entry point handle + AMD_INIT_POST = 0x00027000, ///< AmdInitPost entry point handle + AMD_INIT_RESET = 0x00028000, ///< AmdInitReset entry point handle + AMD_INIT_RESUME = 0x00029000, ///< AmdInitResume entry point handle + AMD_RELEASE_STRUCT = 0x0002A000, ///< AmdReleaseStruct handle + AMD_S3LATE_RESTORE = 0x0002B000, ///< AmdS3LateRestore entry point handle + AMD_GET_APIC_ID = 0x0002C000, ///< AmdGetApicId entry point handle + AMD_GET_PCI_ADDRESS = 0x0002D000, ///< AmdGetPciAddress entry point handle + AMD_IDENTIFY_CORE = 0x0002E000, ///< AmdIdentifyCore general service handle + AMD_READ_EVENT_LOG = 0x0002F000, ///< AmdReadEventLog general service handle + AMD_GET_EXECACHE_SIZE = 0x00030000, ///< AmdGetAvailableExeCacheSize general service handle + AMD_LATE_RUN_AP_TASK = 0x00031000, ///< AmdLateRunApTask entry point handle + AMD_IDENTIFY_DIMMS = 0x00032000, ///< AmdIdentifyDimm general service handle + AMD_GET_2D_DATA_EYE = 0x00033000, ///< AmdGet2DDataEye general service handle + AMD_S3FINAL_RESTORE = 0x00034000, ///< AmdS3FinalRestore entry point handle + AMD_INIT_RTB = 0x00035000, ///< AmdInitRtb entry point handle + // Add + AMD_HEAP_ALLOCATE_BUFFER = 0x00038000, + AMD_HEAP_DEALLOCATE_BUFFER = 0x00039000, + FCH_INIT_RESET = 0x00040000, + FCH_INIT_ENV = 0x00041000, + FCH_INIT_MID = 0x00042000, + FCH_INIT_LATE = 0x00043000, + FCH_INIT_S3_EARLY_RESTORE = 0x00044000, + FCH_INIT_S3_LATE_RESTORE = 0x00045000, + AMD_SET_VALUE = 0x00081000, + AMD_GET_VALUE = 0x00082000 +} AGESA_STRUCT_NAME; + + /* ResetType constant values */ +#define WARM_RESET_WHENEVER 1 +#define COLD_RESET_WHENEVER 2 +#define WARM_RESET_IMMEDIATELY 3 +#define COLD_RESET_IMMEDIATELY 4 + + +// AGESA Structures + +/// The standard header for all AGESA services. +/// For internal AGESA naming conventions, see @ref amdconfigparamname . +typedef struct { + IN VOID * ImageBasePtr; ///< The AGESA Image base address. + IN UINT32 Func; ///< The service desired + IN VOID * AltImageBasePtr; ///< Alternate Image location + IN CALLOUT_ENTRY CalloutPtr; ///< For Callout from AGESA + IN UINT8 HeapStatus; ///< For heap status from boot time slide. + IN UINT64 HeapBasePtr; ///< Location of the heap + IN OUT UINT8 Reserved[7]; ///< This space is reserved for future use. +} AMD_CONFIG_PARAMS; + + +/// Create Struct Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_STRUCT_NAME AgesaFunctionName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< How to handle buffer allocation + IN OUT UINT32 NewStructSize; ///< The size of the allocated data, in for ByHost, else out only. + IN OUT VOID *NewStructPtr; ///< The struct for the service. + ///< The struct to init for ByHost allocation, + ///< the initialized struct on return. +} AMD_INTERFACE_PARAMS; + +#define FUNC_0 0 // bit-placed for PCI address creation +#define FUNC_1 1 +#define FUNC_2 2 +#define FUNC_3 3 +#define FUNC_4 4 +#define FUNC_5 5 +#define FUNC_6 6 +#define FUNC_7 7 + +/// AGESA Binary module header structure +typedef struct { + IN UINT32 Signature; ///< Binary Signature + IN CHAR8 CreatorID[8]; ///< 8 characters ID + IN CHAR8 Version[12]; ///< 12 characters version + IN UINT32 ModuleInfoOffset; ///< Offset of module + IN UINT32 EntryPointAddress; ///< Entry address + IN UINT32 ImageBase; ///< Image base + IN UINT32 RelocTableOffset; ///< Relocate Table offset + IN UINT32 ImageSize; ///< Size + IN UINT16 Checksum; ///< Checksum + IN UINT8 ImageType; ///< Type + IN UINT8 V_Reserved; ///< Reserved +} AMD_IMAGE_HEADER; +/// AGESA Binary module header structure +typedef struct _AMD_MODULE_HEADER { + IN UINT32 ModuleHeaderSignature; ///< Module signature + IN CHAR8 ModuleIdentifier[8]; ///< 8 characters ID + IN CHAR8 ModuleVersion[12]; ///< 12 characters version + IN VOID *ModuleDispatcher; ///< A pointer point to dispatcher + IN struct _AMD_MODULE_HEADER *NextBlock; ///< Next module header link +} AMD_MODULE_HEADER; + +// AMD_CODE_HEADER Signatures. +#define AGESA_CODE_SIGNATURE {'!', '!', '!', 'A', 'G', 'E', 'S', 'A'} +#define CIMXNB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'} +#define CIMXSB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'} + +/// AGESA_CODE_SIGNATURE +typedef struct { + IN CHAR8 Signature[8]; ///< code header Signature + IN CHAR8 ComponentName[16]; ///< 16 character name of the code module + IN CHAR8 Version[12]; ///< 12 character version string + IN CHAR8 TerminatorNull; ///< null terminated string + IN CHAR8 VerReserved[7]; ///< reserved space +} AMD_CODE_HEADER; + +/// Extended PCI address format +typedef struct { + IN OUT UINT32 Register:12; ///< Register offset + IN OUT UINT32 Function:3; ///< Function number + IN OUT UINT32 Device:5; ///< Device number + IN OUT UINT32 Bus:8; ///< Bus number + IN OUT UINT32 Segment:4; ///< Segment +} EXT_PCI_ADDR; + +/// Union type for PCI address +typedef union _PCI_ADDR { + IN UINT32 AddressValue; ///< Formal address + IN EXT_PCI_ADDR Address; ///< Extended address +} PCI_ADDR; + +// SBDFO - Segment Bus Device Function Offset +// 31:28 Segment (4-bits) +// 27:20 Bus (8-bits) +// 19:15 Device (5-bits) +// 14:12 Function(3-bits) +// 11:00 Offset (12-bits) + +#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \ + (((UINT32)(Dev)) << 15) | (((UINT32)(Fun)) << 12) | ((UINT32)(Off))) +#define ILLEGAL_SBDFO 0xFFFFFFFFul + +/// CPUID data received registers format +typedef struct { + OUT UINT32 EAX_Reg; ///< CPUID instruction result in EAX + OUT UINT32 EBX_Reg; ///< CPUID instruction result in EBX + OUT UINT32 ECX_Reg; ///< CPUID instruction result in ECX + OUT UINT32 EDX_Reg; ///< CPUID instruction result in EDX +} CPUID_DATA; + +// Topology Services definitions and macros +#define TOPOLOGY_LIST_TERMINAL 0xFF ///< End of list. + + +#ifndef BIT0 + #define BIT0 0x0000000000000001ull +#endif +#ifndef BIT1 + #define BIT1 0x0000000000000002ull +#endif +#ifndef BIT2 + #define BIT2 0x0000000000000004ull +#endif +#ifndef BIT3 + #define BIT3 0x0000000000000008ull +#endif +#ifndef BIT4 + #define BIT4 0x0000000000000010ull +#endif +#ifndef BIT5 + #define BIT5 0x0000000000000020ull +#endif +#ifndef BIT6 + #define BIT6 0x0000000000000040ull +#endif +#ifndef BIT7 + #define BIT7 0x0000000000000080ull +#endif +#ifndef BIT8 + #define BIT8 0x0000000000000100ull +#endif +#ifndef BIT9 + #define BIT9 0x0000000000000200ull +#endif +#ifndef BIT10 + #define BIT10 0x0000000000000400ull +#endif +#ifndef BIT11 + #define BIT11 0x0000000000000800ull +#endif +#ifndef BIT12 + #define BIT12 0x0000000000001000ull +#endif +#ifndef BIT13 + #define BIT13 0x0000000000002000ull +#endif +#ifndef BIT14 + #define BIT14 0x0000000000004000ull +#endif +#ifndef BIT15 + #define BIT15 0x0000000000008000ull +#endif +#ifndef BIT16 + #define BIT16 0x0000000000010000ull +#endif +#ifndef BIT17 + #define BIT17 0x0000000000020000ull +#endif +#ifndef BIT18 + #define BIT18 0x0000000000040000ull +#endif +#ifndef BIT19 + #define BIT19 0x0000000000080000ull +#endif +#ifndef BIT20 + #define BIT20 0x0000000000100000ull +#endif +#ifndef BIT21 + #define BIT21 0x0000000000200000ull +#endif +#ifndef BIT22 + #define BIT22 0x0000000000400000ull +#endif +#ifndef BIT23 + #define BIT23 0x0000000000800000ull +#endif +#ifndef BIT24 + #define BIT24 0x0000000001000000ull +#endif +#ifndef BIT25 + #define BIT25 0x0000000002000000ull +#endif +#ifndef BIT26 + #define BIT26 0x0000000004000000ull +#endif +#ifndef BIT27 + #define BIT27 0x0000000008000000ull +#endif +#ifndef BIT28 + #define BIT28 0x0000000010000000ull +#endif +#ifndef BIT29 + #define BIT29 0x0000000020000000ull +#endif +#ifndef BIT30 + #define BIT30 0x0000000040000000ull +#endif +#ifndef BIT31 + #define BIT31 0x0000000080000000ull +#endif +#ifndef BIT32 + #define BIT32 0x0000000100000000ull +#endif +#ifndef BIT33 + #define BIT33 0x0000000200000000ull +#endif +#ifndef BIT34 + #define BIT34 0x0000000400000000ull +#endif +#ifndef BIT35 + #define BIT35 0x0000000800000000ull +#endif +#ifndef BIT36 + #define BIT36 0x0000001000000000ull +#endif +#ifndef BIT37 + #define BIT37 0x0000002000000000ull +#endif +#ifndef BIT38 + #define BIT38 0x0000004000000000ull +#endif +#ifndef BIT39 + #define BIT39 0x0000008000000000ull +#endif +#ifndef BIT40 + #define BIT40 0x0000010000000000ull +#endif +#ifndef BIT41 + #define BIT41 0x0000020000000000ull +#endif +#ifndef BIT42 + #define BIT42 0x0000040000000000ull +#endif +#ifndef BIT43 + #define BIT43 0x0000080000000000ull +#endif +#ifndef BIT44 + #define BIT44 0x0000100000000000ull +#endif +#ifndef BIT45 + #define BIT45 0x0000200000000000ull +#endif +#ifndef BIT46 + #define BIT46 0x0000400000000000ull +#endif +#ifndef BIT47 + #define BIT47 0x0000800000000000ull +#endif +#ifndef BIT48 + #define BIT48 0x0001000000000000ull +#endif +#ifndef BIT49 + #define BIT49 0x0002000000000000ull +#endif +#ifndef BIT50 + #define BIT50 0x0004000000000000ull +#endif +#ifndef BIT51 + #define BIT51 0x0008000000000000ull +#endif +#ifndef BIT52 + #define BIT52 0x0010000000000000ull +#endif +#ifndef BIT53 + #define BIT53 0x0020000000000000ull +#endif +#ifndef BIT54 + #define BIT54 0x0040000000000000ull +#endif +#ifndef BIT55 + #define BIT55 0x0080000000000000ull +#endif +#ifndef BIT56 + #define BIT56 0x0100000000000000ull +#endif +#ifndef BIT57 + #define BIT57 0x0200000000000000ull +#endif +#ifndef BIT58 + #define BIT58 0x0400000000000000ull +#endif +#ifndef BIT59 + #define BIT59 0x0800000000000000ull +#endif +#ifndef BIT60 + #define BIT60 0x1000000000000000ull +#endif +#ifndef BIT61 + #define BIT61 0x2000000000000000ull +#endif +#ifndef BIT62 + #define BIT62 0x4000000000000000ull +#endif +#ifndef BIT63 + #define BIT63 0x8000000000000000ull +#endif + +#endif // _AMD_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Dispatcher.h b/src/vendorcode/amd/pi/00660F01/Dispatcher.h new file mode 100644 index 0000000000..777f05cd9e --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Dispatcher.h @@ -0,0 +1,51 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Pushhigh Interface + * + * Contains interface to Pushhigh entry + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Legacy + * @e \$Revision: 281175 $ @e \$Date: 2013-12-18 15:53:00 +0800 (Wed, 18 Dec 2013) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _DISPATCHER_H_ +#define _DISPATCHER_H_ + +// AGESA function prototypes +AGESA_STATUS CALLCONV AmdAgesaDispatcher ( IN OUT VOID *ConfigPtr ); +AGESA_STATUS CALLCONV AmdAgesaCallout ( IN UINT32 Func, IN UINT32 Data, IN OUT VOID *ConfigPtr ); + +#endif // _DISPATCHER_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/Filecode.h b/src/vendorcode/amd/pi/00660F01/Include/Filecode.h new file mode 100644 index 0000000000..0e01812626 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/Filecode.h @@ -0,0 +1,648 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Collectively assign unique filecodes for assert and debug to each source file. + * + * Publish values for decorated filenames, which can be used for + * ASSERT and debug support using a preprocessor define like: + * @n <tt> \#define FILECODE MY_C_FILENAME_FILECODE </tt> @n + * This file serves as a reference for debugging to associate the code and filename. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 309899 $ @e \$Date: 2014-12-23 02:21:13 -0600 (Tue, 23 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FILECODE_H_ +#define _FILECODE_H_ + +#define UNASSIGNED_FILE_FILECODE (0xFFFF) + +/// For debug use in any Platform's options C file. +/// Can be reused for platforms and image builds, since only one options file can be built. +#define PLATFORM_SPECIFIC_OPTIONS_FILECODE (0xBBBB) + + +#define PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE (0xA001) +#define PROC_GNB_GNBINITATEARLY_FILECODE (0xA017) +#define PROC_GNB_GNBINITATENV_FILECODE (0xA020) +#define PROC_GNB_GNBINITATLATE_FILECODE (0xA021) +#define PROC_GNB_GNBINITATMID_FILECODE (0xA022) +#define PROC_GNB_GNBINITATPOST_FILECODE (0xA023) +#define PROC_GNB_GNBINITATRESET_FILECODE (0xA024) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE (0xA025) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE (0xA026) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE (0xA027) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE (0xA028) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE (0xA029) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE (0xA02A) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE (0xA030) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE (0xA031) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE (0xA032) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE (0xA033) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE (0xA036) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE (0xA037) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE (0xA038) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE (0xA039) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE (0xA03B) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMEXITLATENCY_FILECODE (0xA03C) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPHYSERVICES_FILECODE (0xA03D) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE (0xA03E) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE (0xA03F) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE (0xA041) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPOWERMGMT_FILECODE (0xA043) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIESILICONSERVICES_FILECODE (0xA045) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE (0xA046) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE (0xA047) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE (0xA048) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE (0xA049) +#define PROC_GNB_MODULES_GNBPCIECOMMCLKCFG_PCIECOMMCLKCFG_FILECODE (0xA04C) + +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE (0xA08E) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE (0xA08F) +#define PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE (0xA090) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGLIB_FILECODE (0xA093) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEWRAPPERSERVICESV4_FILECODE (0xA0A6) +#define PROC_GNB_MODULES_GNBIOMMUIVRS_GNBIOMMUIVRS_FILECODE (0xA0A7) +#define PROC_GNB_MODULES_GNBIVRSLIB_GNBIVRSLIB_FILECODE (0xA0A8) +#define PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE (0xA0A9) +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE (0xA0AA) + +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE (0xA0BA) +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE (0xA0BB) +#define PROC_GNB_MODULES_GNBSBIOMMULIB_GNBSBIOMMULIB_FILECODE (0xA0BC) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBTIMERLIB_FILECODE (0xA0BD) +#define PROC_GNB_MODULES_GNBSSOCKETLIB_GNBSSOCKETLIB_FILECODE (0xA0BF) +#define PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE (0xA0C0) +#define PROC_GNB_MODULES_GNBPCIEASPM_PCIEASPM_FILECODE (0xA0C2) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEASPMEXITLATENCYV5_FILECODE (0xA0C5) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE (0xA0C6) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE (0xA0C7) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPOWERMGMTV5_FILECODE (0xA0C8) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE (0xA0C9) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE (0xA0CA) +#define PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE (0xA0CB) + +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE (0xA0DB) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPOWERMGMTV4_FILECODE (0xA0DC) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE (0xA0DD) + +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGMID_FILECODE (0xA0E0) + +#define PROC_GNB_MODULES_GNBIOAPIC_GNBIOAPIC_FILECODE (0xA0EE) + +#define PROC_GNB_MODULES_GNBPCIEMAXPAYLOAD_PCIEMAXPAYLOAD_FILECODE (0xA0F4) +#define PROC_GNB_MODULES_GNBPCIECLKPM_PCIECLKPM_FILECODE (0xA0F5) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIETOPOLOGYSERVICESV5_FILECODE (0xA100) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIETRAININGV2_FILECODE (0xA101) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIEWORKAROUNDSV2_FILECODE (0xA102) + +#define PROC_GNB_MODULES_GNBINITCZ_ALIBCZ_FILECODE (0xA202) +#define PROC_GNB_MODULES_GNBINITCZ_GFXENVINITCZ_FILECODE (0xA203) +#define PROC_GNB_MODULES_GNBINITCZ_GFXGMCINITCZ_FILECODE (0xA204) +#define PROC_GNB_MODULES_GNBINITCZ_GFXINTEGRATEDINFOTABLECZ_FILECODE (0xA205) +#define PROC_GNB_MODULES_GNBINITCZ_GFXLIBCZ_FILECODE (0xA206) +#define PROC_GNB_MODULES_GNBINITCZ_GFXMIDINITCZ_FILECODE (0xA207) +#define PROC_GNB_MODULES_GNBINITCZ_GFXPOSTINITCZ_FILECODE (0xA208) +#define PROC_GNB_MODULES_GNBINITCZ_GNBEARLYINITCZ_FILECODE (0xA209) +#define PROC_GNB_MODULES_GNBINITCZ_GNBENVINITCZ_FILECODE (0xA20A) +#define PROC_GNB_MODULES_GNBINITCZ_GNBFUSETABLECZ_FILECODE (0xA20B) +#define PROC_GNB_MODULES_GNBINITCZ_GNBIOMMUIVRSCZ_FILECODE (0xA20C) +#define PROC_GNB_MODULES_GNBINITCZ_GNBMIDINITCZ_FILECODE (0xA20D) +#define PROC_GNB_MODULES_GNBINITCZ_GNBPOSTINITCZ_FILECODE (0xA20E) +#define PROC_GNB_MODULES_GNBINITCZ_GNBREGISTERACCCZ_FILECODE (0xA20F) +#define PROC_GNB_MODULES_GNBINITCZ_GNBURATOKENMAPCZ_FILECODE (0xA211) +#define PROC_GNB_MODULES_GNBINITCZ_PCIECOMPLEXDATACZ_FILECODE (0xA212) +#define PROC_GNB_MODULES_GNBINITCZ_PCIECONFIGCZ_FILECODE (0xA213) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEEARLYINITCZ_FILECODE (0xA214) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEENVINITCZ_FILECODE (0xA215) +#define PROC_GNB_MODULES_GNBINITCZ_PCIELIBCZ_FILECODE (0xA216) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEMIDINITCZ_FILECODE (0xA217) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEPOSTINITCZ_FILECODE (0xA218) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEPOWERGATECZ_FILECODE (0xA219) +#define PROC_GNB_MODULES_GNBINITCZ_GNBURACZ_FILECODE (0xA21A) +#define PROC_GNB_MODULES_GNBSMULIBV8_GNBSMUINITLIBV8_FILECODE (0xA21B) +#define PROC_GNB_MODULES_GNBINITCZ_PCIEARIINITCZ_FILECODE (0xA21C) +#define PROC_GNB_MODULES_GNBINITCZ_GNBBOOTTIMECALCZ_FILECODE (0xA21D) +#define PROC_GNB_MODULES_GNBINITCZ_GNBPSPCZ_FILECODE (0xA21E) +#define PROC_GNB_MODULES_GNBINITCZ_GNBSMUINITCZ_FILECODE (0xA21F) + +#define PROC_RECOVERY_GNB_GNBRECOVERY_FILECODE (0xAE01) +#define PROC_RECOVERY_GNB_NBINITRECOVERY_FILECODE (0xAE02) +#define PROC_GNB_GNBINITATRTB_FILECODE (0xAE03) +#define PROC_GNB_MODULES_GNBSVIEW_GNBSVIEW_FILECODE (0xAE04) + +#define PROC_GNB_MODULES_GNBIOMMUSCRATCH_GNBIOMMUSCRATCH_FILECODE (0xAE18) + +#define PROC_GNB_MODULES_GNBPCIEALIBV2_PCIEALIBV2_FILECODE (0xAE33) +#define PROC_GNB_MODULES_GNBURALIBV1_GNBURALIBV1_FILECODE (0xAE3A) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV5_GFXLIBV5_FILECODE (0xAE41) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV5_GFXINTEGRATEDINFOTABLEV5_FILECODE (0xAE42) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV5_GFXPWRPLAYTABLEV5_FILECODE (0xAE43) +#define PROC_GNB_MODULES_GNBAZALIALIB_GNBAZALIALIB_FILECODE (0xAE44) + +// FCH +#define PROC_FCH_COMMON_ACPILIB_FILECODE (0xB010) +#define PROC_FCH_COMMON_FCHLIB_FILECODE (0xB011) +#define PROC_FCH_COMMON_FCHCOMMON_FILECODE (0xB012) +#define PROC_FCH_COMMON_FCHCOMMONSMM_FILECODE (0xB013) +#define PROC_FCH_COMMON_MEMLIB_FILECODE (0xB014) +#define PROC_FCH_COMMON_PCILIB_FILECODE (0xB015) +#define PROC_FCH_COMMON_FCHPELIB_FILECODE (0xB016) + +#define UEFI_SMM_MEMSMMLIB_MEMSMMLIB_FILECODE (0xB2C1) +#define UEFI_SMM_MEMSMMLIB_CZ_DRAMMAPCZ_FILECODE (0xB2C3) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIARESET_FILECODE (0xB400) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIAENV_FILECODE (0xB401) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIAMID_FILECODE (0xB402) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIALATE_FILECODE (0xB403) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIRESET_FILECODE (0xB410) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIENV_FILECODE (0xB411) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIMID_FILECODE (0xB412) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPILATE_FILECODE (0xB413) +#define PROC_FCH_KERN_KERNHWACPI_KERNSSSERVICE_FILECODE (0xB414) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIENVSERVICE_FILECODE (0xB415) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIMIDSERVICE_FILECODE (0xB416) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPILATESERVICE_FILECODE (0xB417) +#define PROC_FCH_KERN_KERNHWM_KERNHWMRESET_FILECODE (0xB420) +#define PROC_FCH_KERN_KERNHWM_KERNHWMENV_FILECODE (0xB421) +#define PROC_FCH_KERN_KERNHWM_KERNHWMMID_FILECODE (0xB422) +#define PROC_FCH_KERN_KERNHWM_KERNHWMLATE_FILECODE (0xB423) +#define PROC_FCH_KERN_KERNHWM_KERNHWMENVSERVICE_FILECODE (0xB424) +#define PROC_FCH_KERN_KERNHWM_KERNHWMMIDSERVICE_FILECODE (0xB425) +#define PROC_FCH_KERN_KERNHWM_KERNHWMLATESERVICE_FILECODE (0xB426) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITRESET_FILECODE (0xB427) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITENV_FILECODE (0xB428) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITMID_FILECODE (0xB429) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITLATE_FILECODE (0xB42A) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITS3_FILECODE (0xB42B) +#define PROC_FCH_KERN_KERNINTERFACE_KERNINITRESETDEF_FILECODE (0xB42C) +#define PROC_FCH_KERN_KERNINTERFACE_KERNINITENVDEF_FILECODE (0xB42D) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHTASKLAUNCHER_FILECODE (0xB42E) +#define PROC_FCH_KERN_KERNIMC_KERNIMCRESET_FILECODE (0xB430) +#define PROC_FCH_KERN_KERNIMC_KERNIMCENV_FILECODE (0xB431) +#define PROC_FCH_KERN_KERNIMC_KERNIMCMID_FILECODE (0xB432) +#define PROC_FCH_KERN_KERNIMC_KERNIMCLATE_FILECODE (0xB433) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECRESET_FILECODE (0xB434) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECENV_FILECODE (0xB435) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECMID_FILECODE (0xB436) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECLATE_FILECODE (0xB437) +#define PROC_FCH_KERN_KERNIMC_KERNIMCLIB_FILECODE (0xB438) +#define PROC_FCH_KERN_KERNIMC_KERNIMCSERVICE_FILECODE (0xB439) +#define PROC_FCH_KERN_KERNIR_KERNIRENV_FILECODE (0xB43A) +#define PROC_FCH_KERN_KERNIR_KERNIRMID_FILECODE (0xB43B) +#define PROC_FCH_KERN_KERNIR_KERNIRLATE_FILECODE (0xB43C) +#define PROC_FCH_KERN_KERNPCIE_KERNABRESET_FILECODE (0xB440) +#define PROC_FCH_KERN_KERNPCIE_KERNABENV_FILECODE (0xB441) +#define PROC_FCH_KERN_KERNPCIE_KERNABMID_FILECODE (0xB442) +#define PROC_FCH_KERN_KERNPCIE_KERNABLATE_FILECODE (0xB443) +#define PROC_FCH_KERN_KERNPCIE_KERNABENVSERVICE_FILECODE (0xB44C) +#define PROC_FCH_KERN_KERNPCIE_KERNABRESETSERVICE_FILECODE (0xB44D) +#define PROC_FCH_KERN_KERNPCIE_KERNABSERVICE_FILECODE (0xB44E) +#define PROC_FCH_KERN_KERNSATA_KERNSATARESET_FILECODE (0xB460) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENV_FILECODE (0xB461) +#define PROC_FCH_KERN_KERNSATA_KERNSATAMID_FILECODE (0xB462) +#define PROC_FCH_KERN_KERNSATA_KERNSATALATE_FILECODE (0xB463) +#define PROC_FCH_KERN_KERNSATA_KERNSATARESETSERVICE_FILECODE (0xB464) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENVSERVICE_FILECODE (0xB465) +#define PROC_FCH_KERN_KERNSATA_KERNSATASERVICE_FILECODE (0xB466) +#define PROC_FCH_KERN_KERNSATA_KERNSATALIB_FILECODE (0xB467) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENVLIB_FILECODE (0xB468) +#define PROC_FCH_KERN_KERNSATA_KERNAHCILIB_FILECODE (0xB469) +#define PROC_FCH_KERN_KERNSATA_KERNAHCIENV_FILECODE (0xB46A) +#define PROC_FCH_KERN_KERNSATA_KERNAHCIMID_FILECODE (0xB46B) +#define PROC_FCH_KERN_KERNSATA_KERNAHCILATE_FILECODE (0xB46C) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDLIB_FILECODE (0xB46D) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDENV_FILECODE (0xB46E) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDMID_FILECODE (0xB46F) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDLATE_FILECODE (0xB470) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCILIB_FILECODE (0xB471) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCIENV_FILECODE (0xB472) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCIMID_FILECODE (0xB473) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCILATE_FILECODE (0xB474) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDELIB_FILECODE (0xB475) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDEENV_FILECODE (0xB476) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDEMID_FILECODE (0xB477) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDELATE_FILECODE (0xB478) +#define PROC_FCH_KERN_KERNSD_KERNSDENV_FILECODE (0xB481) +#define PROC_FCH_KERN_KERNSD_KERNSDMID_FILECODE (0xB482) +#define PROC_FCH_KERN_KERNSD_KERNSDLATE_FILECODE (0xB483) +#define PROC_FCH_KERN_KERNSD_KERNSDRESETSERVICE_FILECODE (0xB484) +#define PROC_FCH_KERN_KERNSD_KERNSDENVSERVICE_FILECODE (0xB485) +#define PROC_FCH_KERN_KERNSD_KERNSDSERVICE_FILECODE (0xB486) +#define PROC_FCH_KERN_KERNSPI_KERNSPIRESET_FILECODE (0xB490) +#define PROC_FCH_KERN_KERNSPI_KERNSPIENV_FILECODE (0xB491) +#define PROC_FCH_KERN_KERNSPI_KERNSPIMID_FILECODE (0xB492) +#define PROC_FCH_KERN_KERNSPI_KERNSPILATE_FILECODE (0xB493) +#define PROC_FCH_KERN_KERNSPI_KERNLPCRESET_FILECODE (0xB494) +#define PROC_FCH_KERN_KERNSPI_KERNLPCENV_FILECODE (0xB495) +#define PROC_FCH_KERN_KERNSPI_KERNLPCMID_FILECODE (0xB496) +#define PROC_FCH_KERN_KERNSPI_KERNLPCLATE_FILECODE (0xB497) +#define PROC_FCH_KERN_KERNSPI_KERNLPCRESETSERVICE_FILECODE (0xB498) +#define PROC_FCH_KERN_KERNSPI_KERNLPCENVSERVICE_FILECODE (0xB499) +#define PROC_FCH_KERN_KERNUSB_KERNUSBRESET_FILECODE (0xB4A0) +#define PROC_FCH_KERN_KERNUSB_KERNUSBENV_FILECODE (0xB4A1) +#define PROC_FCH_KERN_KERNUSB_KERNUSBMID_FILECODE (0xB4A2) +#define PROC_FCH_KERN_KERNUSB_KERNUSBLATE_FILECODE (0xB4A3) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIRESET_FILECODE (0xB4A4) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIENV_FILECODE (0xB4A5) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIMID_FILECODE (0xB4A6) +#define PROC_FCH_KERN_KERNUSB_KERNEHCILATE_FILECODE (0xB4A7) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIMIDSERVICE_FILECODE (0xB4A8) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIENVSERVICE_FILECODE (0xB4A9) +#define PROC_FCH_KERN_KERNUSB_KERNEHCILATESERVICE_FILECODE (0xB4AA) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRESET_FILECODE (0xB4B2) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIENV_FILECODE (0xB4B3) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIMID_FILECODE (0xB4B4) +#define PROC_FCH_KERN_KERNUSB_KERNXHCILATE_FILECODE (0xB4B5) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRESETSERVICE_FILECODE (0xB4B6) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIENVSERVICE_FILECODE (0xB4B7) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIMIDSERVICE_FILECODE (0xB4B8) +#define PROC_FCH_KERN_KERNUSB_KERNXHCILATESERVICE_FILECODE (0xB4B9) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRECOVERY_FILECODE (0xB4BA) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICS_FILECODE (0xB408) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICSAML_FILECODE (0xB409) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICSCONTROL_FILECODE (0xB40A) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FUNCTIONS_FCHD3COLD_FCHD3COLD_FILECODE (0xB40B) +#define UEFI_FCH_KERN_DXE_AMDFCHHWM_AMDFCHHWM_FILECODE (0xB4C1) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEA_FILECODE (0xB4C2) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEAEINJ_FILECODE (0xB4C3) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEAHEST_FILECODE (0xB4C4) +#define UEFI_FCH_KERN_DXE_CF9RESET_CF9RESET_FILECODE (0xB4C5) +#define UEFI_FCH_KERN_DXE_CF9RESET_IA32_IA32CF9RESET_FILECODE (0xB4C6) +#define UEFI_FCH_KERN_DXE_CF9RESET_X64_X64CF9RESET_FILECODE (0xB4C7) +#define UEFI_FCH_KERN_DXE_FCHDXE_FCHDXE_FILECODE (0xB4C8) +#define UEFI_FCH_KERN_DXE_FCHDXE_USBOC_FILECODE (0xB4C9) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEBOOTTIMER_FILECODE (0xB4CA) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEDISUSBPORT_FILECODE (0xB4CB) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEESATAPORT_FILECODE (0xB4CC) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEGPIO_FILECODE (0xB4CD) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEGPIOREAD_FILECODE (0xB4CE) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_FCHDXEAUX_FILECODE (0xB4CF) +#define UEFI_FCH_KERN_DXE_FCHDXELIB_FCHDXELIB_FILECODE (0xB4D0) +#define UEFI_FCH_KERN_DXE_FCHDXELPCCLKRUN_FCHDXELPCCLKRUN_FILECODE (0xB4D1) +#define UEFI_FCH_KERN_DXE_FCHDXEMMIO_FCHDXEMMIO_FILECODE (0xB4D2) +#define UEFI_FCH_KERN_DXE_LEGACYINTERRUPT_LEGACYINTERRUPT_FILECODE (0xB4D3) +#define UEFI_FCH_KERN_DXE_SMBUS_SMBUSLIGHT_FILECODE (0xB4D4) +#define UEFI_FCH_KERN_DXE_SMMCONTROL_SMMCONTROL_FILECODE (0xB4D5) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHEHCIRECOVERY_FILECODE (0xB4D6) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHPEI_FILECODE (0xB4D8) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHRESET_FILECODE (0xB4D9) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHSATARECOVERY_FILECODE (0xB4DA) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHSTALL_FILECODE (0xB4DB) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHXHCIRECOVERY_FILECODE (0xB4DC) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_FCHPEIAUX_FILECODE (0xB4DD) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIBOOTTIMER_FILECODE (0xB4DE) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIDISUSBPORT_FILECODE (0xB4DF) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIGPIO_FILECODE (0xB4E0) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIGPIOREAD_FILECODE (0xB4E1) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIOSCOUTCLOCK_FILECODE (0xB4E2) +#define UEFI_FCH_KERN_PEI_FCHPEILIB_FCHPEILIB_FILECODE (0xB4E3) +#define UEFI_FCH_KERN_PEI_FCHPEILIB_LIBAMDPEI_FILECODE (0xB4E4) +#define UEFI_FCH_KERN_PEI_SMBUS_SMBUS_FILECODE (0xB4E5) +#define UEFI_FCH_KERN_SMM_FCHSMM_FCHSMM_FILECODE (0xB4E6) +#define UEFI_FCH_KERN_SMM_FCHSMM_GPESMI_FILECODE (0xB4E7) +#define UEFI_FCH_KERN_SMM_FCHSMM_IOTRAPSMI_FILECODE (0xB4E8) +#define UEFI_FCH_KERN_SMM_FCHSMM_MISCSMI_FILECODE (0xB4E9) +#define UEFI_FCH_KERN_SMM_FCHSMM_PERIODICTIMERSMI_FILECODE (0xB4EA) +#define UEFI_FCH_KERN_SMM_FCHSMM_POWERBUTTONSMI_FILECODE (0xB4EB) +#define UEFI_FCH_KERN_SMM_FCHSMM_SWSMI_FILECODE (0xB4EC) +#define UEFI_FCH_KERN_SMM_FCHSMM_SXSMI_FILECODE (0xB4ED) +#define UEFI_FCH_KERN_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROL_FILECODE (0xB4F0) +#define UEFI_FCH_KERN_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROLLIB_FILECODE (0xB4F1) +#define UEFI_FCH_KERN_SMM_FCHSMMLIB_FCHDXECOMMON_FILECODE (0xB4F5) +#define UEFI_FCH_KERN_SMM_FCHSMMLIB_FCHSMMLIB_FILECODE (0xB4F6) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMDISPATCHER_FILECODE (0xB4F7) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMGPEDISPATCHER_FCHSMMGPEDISPATCHER_FILECODE (0xB4F8) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMIOTRAPDISPATCHER_FCHSMMIOTRAPDISPATCHER_FILECODE (0xB4F9) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMMISCDISPATCHER_FCHSMMMISCDISPATCHER_FILECODE (0xB4FA) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMPERIODICALDISPATCHER_FCHSMMPERIODICALDISPATCHER_FILECODE (0xB4FB) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMPWRBTNDISPATCHER_FCHSMMPWRBTNDISPATCHER_FILECODE (0xB4FC) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMSWDISPATCHER_FCHSMMSWDISPATCHER_FILECODE (0xB4FE) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMSXDISPATCHER_FCHSMMSXDISPATCHER_FILECODE (0xB4FF) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMUSBDISPATCHER_FCHSMMUSBDISPATCHER_FILECODE (0xB4F2) + + +#define LIB_AMDLIB_FILECODE (0xC001) +#define LEGACY_PROC_AGESACALLOUTS_FILECODE (0xC010) +#define LEGACY_PROC_HOBTRANSFER_FILECODE (0xC011) +#define LEGACY_PROC_DISPATCHER_FILECODE (0xC012) + +#define UEFI_DXE_AMDAGESADXEDRIVER_AMDAGESADXEDRIVER_FILECODE (0xC120) + +#define UEFI_PEI_AMDINITPOSTPEIM_AMDINITPOSTPEIM_FILECODE (0xC140) +#define UEFI_PEI_AMDPROCESSORINITPEIM_AMDPROCESSORINITPEIM_FILECODE (0xC141) +#define UEFI_PEI_AMDRESETMANAGER_AMDRESETMANAGER_FILECODE (0xC142) +#define UEFI_PROC_COMMON_HOBTRANSFERUEFI_FILECODE (0xC160) +#define UEFI_PROC_DXE_HOBTRANSFERUEFIDXE_FILECODE (0xC161) +#define UEFI_PROC_PEI_HOBTRANSFERUEFIPEI_FILECODE (0xC162) + +#define PROC_COMMON_AMDINITEARLY_FILECODE (0xC020) +#define PROC_COMMON_AMDINITENV_FILECODE (0xC021) +#define PROC_COMMON_AMDINITLATE_FILECODE (0xC022) +#define PROC_COMMON_AMDINITMID_FILECODE (0xC023) +#define PROC_COMMON_AMDINITPOST_FILECODE (0xC024) +#define PROC_COMMON_AMDINITRECOVERY_FILECODE (0xC025) +#define PROC_COMMON_AMDINITRESET_FILECODE (0xC026) +#define PROC_COMMON_AMDINITRESUME_FILECODE (0xC027) +#define PROC_COMMON_AMDS3LATERESTORE_FILECODE (0xC028) +#define PROC_COMMON_AMDINITRTB_FILECODE (0xC029) +#define PROC_COMMON_AMDLATERUNAPTASK_FILECODE (0xC02A) +#define PROC_COMMON_AMDS3FINALRESTORE_FILECODE (0xC02B) + +#define PROC_COMMON_COMMONRETURNS_FILECODE (0xC0C0) +#define PROC_COMMON_CREATESTRUCT_FILECODE (0xC0D0) +#define PROC_COMMON_COMMONINITS_FILECODE (0xC0F0) +#define PROC_COMMON_S3RESTORESTATE_FILECODE (0xC0F8) +#define PROC_COMMON_S3SAVESTATE_FILECODE (0xC0F9) +#define PROC_COMMON_S3INIT_FILECODE (0xC0FA) + +#define PROC_CPU_CPUAPCOMM_FILECODE (0xC401) +#define PROC_CPU_CPUAPCOMMAPIC_FILECODE (0xC402) +#define PROC_CPU_CPUAPCOMMPCI_FILECODE (0xC403) +#define PROC_CPU_TABLE_FILECODE (0xC404) +#define PROC_CPU_CPUEARLYINIT_FILECODE (0xC405) +#define PROC_CPU_CPUEVENTLOG_FILECODE (0xC406) +#define PROC_CPU_CPUFAMILYTRANSLATION_FILECODE (0xC407) +#define PROC_CPU_CPUGENERALSERVICES_FILECODE (0xC408) +#define PROC_CPU_CPULATEINIT_FILECODE (0xC40A) +#define PROC_CPU_CPUMICROCODEPATCH_FILECODE (0xC40B) +#define PROC_CPU_CPUWARMRESET_FILECODE (0xC40C) +#define PROC_CPU_HEAPMANAGER_FILECODE (0xC40D) +#define PROC_CPU_CPUBIST_FILECODE (0xC40E) +#define PROC_CPU_MMIOMAPMANAGER_FILECODE (0xC40F) +#define PROC_CPU_CPUINITEARLYTABLE_FILECODE (0xC410) +#define PROC_CPU_CPURESETINIT_FILECODE (0xC411) +#define PROC_CPU_CPUPOSTINIT_FILECODE (0xC420) +#define PROC_CPU_CPUMIDINIT_FILECODE (0xC421) +#define PROC_CPU_CPUPOWERMGMT_FILECODE (0xC430) +#define PROC_CPU_S3_FILECODE (0xC460) + +// Family 15h +#define PROC_CPU_FAMILY_0X15_CPUCOMMONF15UTILITIES_FILECODE (0xCB01) +#define PROC_CPU_FAMILY_0X15_CPUF15BRANDID_FILECODE (0xCB02) +#define PROC_CPU_FAMILY_0X15_CPUF15CACHEDEFAULTS_FILECODE (0xCB03) +#define PROC_CPU_FAMILY_0X15_CPUF15DMI_FILECODE (0xCB04) +#define PROC_CPU_FAMILY_0X15_CPUF15UTILITIES_FILECODE (0xCB08) +#define PROC_CPU_FAMILY_0X15_CPUF15WHEAINITDATATABLES_FILECODE (0xCB09) +#define PROC_CPU_FAMILY_0X15_CPUF15APM_FILECODE (0xCB0A) +#define PROC_CPU_FAMILY_0X15_CPUF15CRAT_FILECODE (0xCB0B) +#define PROC_CPU_FAMILY_0X15_CPUF15MMIOMAP_FILECODE (0xCB0C) +#define PROC_CPU_FAMILY_0X15_CPUF15PREFETCHMODE_FILECODE (0xCB0D) + +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCOREAFTERRESET_FILECODE (0xCB70) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZDMI_FILECODE (0xCB71) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZNBAFTERRESET_FILECODE (0xCB72) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZPSTATE_FILECODE (0xCB73) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZLOGICALIDTABLES_FILECODE (0xCB74) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZMICROCODEPATCHTABLES_FILECODE (0xCB75) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZALLCORETABLES_FILECODE (0xCB76) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCOMPUTEUNITTABLES_FILECODE (0xCB77) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZEQUIVALENCETABLE_FILECODE (0xCB78) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZPRIMARYCORETABLES_FILECODE (0xCB79) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZPOWERMGMTSYSTEMTABLES_FILECODE (0xCB7A) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZUTILITIES_FILECODE (0xCB7C) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZC6STATE_FILECODE (0xCB7D) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCPB_FILECODE (0xCB7E) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZIOCSTATE_FILECODE (0xCB7F) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCACHEFLUSHONHALT_FILECODE (0xCB80) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZHTC_FILECODE (0xCB81) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZINITEARLYTABLE_FILECODE (0xCB82) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZEARLYSAMPLES_FILECODE (0xCB83) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZPSI_FILECODE (0xCB85) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZWORKAROUNDTABLE_FILECODE (0xCB87) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCC6EXITCONTROL_FILECODE (0xCB88) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZCONNECTEDSTANDBY_FILECODE (0xCB89) +#define PROC_CPU_FAMILY_0X15_CZ_CPUF15CZBTC_FILECODE (0xCB8A) + +#define PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE (0xDC01) +#define PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE (0xDC02) +#define PROC_CPU_FEATURE_CPUDMI_FILECODE (0xDC10) +#define PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE (0xDC43) +#define PROC_CPU_FEATURE_CPUWHEA_FILECODE (0xDC70) +#define PROC_CPU_FEATURE_CPUC6STATE_FILECODE (0xDC82) +#define PROC_CPU_FEATURE_CPUCPB_FILECODE (0xDC83) +#define PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE (0xDC85) +#define PROC_CPU_FEATURE_CPUAPM_FILECODE (0xDC86) +#define PROC_CPU_FEATURE_CPUFEATURES_FILECODE (0xDC90) +#define PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE (0xDCB0) +#define PROC_CPU_FEATURE_CPUPSI_FILECODE (0xDCC0) +#define PROC_CPU_FEATURE_CPUHTC_FILECODE (0xDCC1) +#define PROC_CPU_FEATURE_CPUCRAT_FILECODE (0xDCD0) +#define PROC_CPU_FEATURE_CPUCDIT_FILECODE (0xDCD1) +#define PROC_CPU_FEATURE_CPUPREFETCHMODE_FILECODE (0xDCD3) +#define PROC_CPU_FEATURE_CPUCONNECTEDSTANDBY_FILECODE (0xDCD5) +#define PROC_CPU_FEATURE_CPUCC6EXITCONTROL_FILECODE (0xDCD6) + +#define PROC_RECOVERY_CPU_CPURECOVERY_FILECODE (0xDE01) + +#define PROC_TOPOLOGY_TOPOMAIN_FILECODE (0xE001) +#define PROC_TOPOLOGY_TOPONB_FILECODE (0xE002) +#define PROC_TOPOLOGY_FAM15_TOPONBFAM15_FILECODE (0xE087) +#define PROC_TOPOLOGY_FAM15_TOPONBUTILITIESFAM15_FILECODE (0xE088) + +#define PROC_RECOVERY_TOPOLOGY_TOPOINITRECOVERY_FILECODE (0xE0FF) + +#define PROC_IDS_CONTROL_IDSCTRL_FILECODE (0xE801) +#define PROC_IDS_LIBRARY_IDSLIB_FILECODE (0xE802) +#define PROC_IDS_DEBUG_IDSDEBUG_FILECODE (0xE803) +#define PROC_IDS_PERF_IDSPERF_FILECODE (0xE804) +#define PROC_IDS_FAMILY_0X15_IDSF15ALLSERVICE_FILECODE (0xE80C) + +#define PROC_IDS_LIBRARY_IDSREGACC_FILECODE (0xE810) +#define PROC_IDS_DEBUG_IDSDPHDTOUT_FILECODE (0xE811) +#define PROC_IDS_DEBUG_IDSDEBUGPRINT_FILECODE (0xE812) +#define PROC_IDS_DEBUG_IDSDPSERIAL_FILECODE (0xE813) +#define PROC_IDS_DEBUG_IDSDPREDIRECTIO_FILECODE (0xE814) +#define PROC_IDS_DEBUG_IDSDPRAM_FILECODE (0xE815) + +#define PROC_IDS_DEBUG_IDSIDTTABLE_FILECODE (0xE81E) +#define PROC_IDS_CONTROL_IDSNVTOCMOS_FILECODE (0xE81F) +#define PROC_IDS_FAMILY_0X15_CZ_IDSF15CZALLSERVICE_FILECODE (0xE821) + + +///0xE820 ~ 0xE840 is reserved for ids extend module + +#define PROC_MEM_ARDK_MA_FILECODE (0xF001) + +#define PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE (0xF081) +#define PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE (0xF082) +#define PROC_MEM_FEAT_ECC_MFECC_FILECODE (0xF083) +#define PROC_MEM_FEAT_ECC_MFEMP_FILECODE (0xF085) +#define PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE (0xF086) +#define PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE (0xF088) +#define PROC_MEM_FEAT_INTLVRN_MFINTLVRN_FILECODE (0xF089) +#define PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE (0xF08A) +#define PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE (0xF08B) +#define PROC_MEM_FEAT_NDINTLV_MFNDI_FILECODE (0xF08C) +#define PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE (0xF08D) +#define PROC_MEM_FEAT_OLSPARE_MFSPR_FILECODE (0xF08E) +#define PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE (0xF091) +#define PROC_MEM_FEAT_S3_MFS3_FILECODE (0xF092) +#define PROC_MEM_FEAT_TABLE_MFTDS_FILECODE (0xF093) +#define PROC_MEM_FEAT_CHINTLV_MFMCHI_FILECODE (0xF094) +#define PROC_MEM_FEAT_CRAT_MFCRAT_FILECODE (0xF095) +#define PROC_MEM_FEAT_AMP_MFAMP_FILECODE (0xF096) +#define PROC_MEM_FEAT_DATAEYE_MF2DDATAEYE_FILECODE (0xF097) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFWRDAT2DTRAINING_FILECODE (0xF098) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DEYERIMSEARCH_FILECODE (0xF099) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDDQS2DTRAINING_FILECODE (0xF09A) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DTRAINING_FILECODE (0xF09B) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DPATTERNGENERATION_FILECODE (0xF09C) +#define PROC_MEM_FEAT_AGGRESSOR_MFAGGRESSOR_FILECODE (0xF09F) +#define PROC_MEM_FEAT_DLLPDBYPASS_MFDLLPDBYPASS_FILECODE (0xF0A0) + +#define PROC_MEM_MAIN_MDEF_FILECODE (0xF101) +#define PROC_MEM_MAIN_MINIT_FILECODE (0xF102) +#define PROC_MEM_MAIN_MM_FILECODE (0xF103) +#define PROC_MEM_FEAT_DMI_MFDMI_FILECODE (0xF104) +#define PROC_MEM_MAIN_MMECC_FILECODE (0xF105) +#define PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE (0xF106) +#define PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE (0xF10B) +#define PROC_MEM_MAIN_MMONLINESPARE_FILECODE (0xF10C) +#define PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE (0xF10D) +#define PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE (0xF10E) +#define PROC_MEM_MAIN_MUC_FILECODE (0xF10F) +#define PROC_MEM_MAIN_MMMEMCLR_FILECODE (0xF110) +#define PROC_MEM_MAIN_MMFLOW_FILECODE (0xF112) +#define PROC_MEM_MAIN_MERRHDL_FILECODE (0xF113) +#define PROC_MEM_MAIN_MMLVDDR3_FILECODE (0xF115) +#define PROC_MEM_MAIN_MMUMAALLOC_FILECODE (0xF116) +#define PROC_MEM_MAIN_MMMEMRESTORE_FILECODE (0xF117) +#define PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE (0xF118) +#define PROC_MEM_MAIN_MMAGGRESSOR_FILECODE (0xF119) +#define PROC_MEM_MAIN_CZ_MMFLOWD3CZ_FILECODE (0xF127) + +#define PROC_MEM_NB_MN_FILECODE (0XF27C) +#define PROC_MEM_NB_MNDCT_FILECODE (0XF27D) +#define PROC_MEM_NB_MNPHY_FILECODE (0XF27E) +#define PROC_MEM_NB_MNMCT_FILECODE (0XF27F) +#define PROC_MEM_NB_MNS3_FILECODE (0XF280) +#define PROC_MEM_NB_MNFLOW_FILECODE (0XF281) +#define PROC_MEM_NB_MNFEAT_FILECODE (0XF282) +#define PROC_MEM_NB_MNTRAIN3_FILECODE (0XF284) +#define PROC_MEM_NB_MNREG_FILECODE (0XF285) +#define PROC_MEM_NB_MNPMU_FILECODE (0xF2B7) +#define PROC_MEM_NB_CZ_MNCZ_FILECODE (0xF2D8) +#define PROC_MEM_NB_CZ_MNDCTCZ_FILECODE (0xF2D9) +#define PROC_MEM_NB_CZ_MNIDENDIMMCZ_FILECODE (0xF2DA) +#define PROC_MEM_NB_CZ_MNMCTCZ_FILECODE (0xF2DB) +#define PROC_MEM_NB_CZ_MNPHYCZ_FILECODE (0xF2DC) +#define PROC_MEM_NB_CZ_MNPMUCZ_FILECODE (0xF2DD) +#define PROC_MEM_NB_CZ_MNPMUSRAMMSGBLOCKCZ_FILECODE (0xF2DE) +#define PROC_MEM_NB_CZ_MNPROTOCZ_FILECODE (0xF2DF) +#define PROC_MEM_NB_CZ_MNREGCZ_FILECODE (0xF2E0) +#define PROC_MEM_NB_CZ_MNS3CZ_FILECODE (0xF2E1) +#define PROC_MEM_NB_CZ_MNPSPCZ_FILECODE (0XF2E3) + + +#define PROC_MEM_PS_MP_FILECODE (0XF401) +#define PROC_MEM_PS_MPRTT_FILECODE (0XF422) +#define PROC_MEM_PS_MPMAXFREQ_FILECODE (0XF423) +#define PROC_MEM_PS_MPODTPAT_FILECODE (0XF424) +#define PROC_MEM_PS_MPSAO_FILECODE (0XF425) +#define PROC_MEM_PS_MPMR0_FILECODE (0XF426) +#define PROC_MEM_PS_MPRC2IBT_FILECODE (0XF427) +#define PROC_MEM_PS_MPRC10OPSPD_FILECODE (0XF428) +#define PROC_MEM_PS_MPLRIBT_FILECODE (0XF429) +#define PROC_MEM_PS_MPLRNPR_FILECODE (0XF42A) +#define PROC_MEM_PS_MPLRNLR_FILECODE (0XF42B) +#define PROC_MEM_PS_MPS2D_FILECODE (0XF436) +#define PROC_MEM_PS_MPSEEDS_FILECODE (0XF437) +#define PROC_MEM_PS_MPCADCFG_FILECODE (0XF43C) +#define PROC_MEM_PS_MPDATACFG_FILECODE (0XF43D) +#define PROC_MEM_PS_CZ_MPCZ3_FILECODE (0XF445) +#define PROC_MEM_PS_CZ_MPSCZ3_FILECODE (0XF446) +#define PROC_MEM_PS_CZ_MPUCZ3_FILECODE (0XF447) +#define PROC_MEM_PS_CZ_FP4_MPSCZFP4_FILECODE (0XF44A) +#define PROC_MEM_PS_CZ_FP4_MPUCZFP4_FILECODE (0XF44B) + + +#define PROC_MEM_TECH_MT_FILECODE (0XF501) +#define PROC_MEM_TECH_MTHDI_FILECODE (0XF502) +#define PROC_MEM_TECH_MTTDIMBT_FILECODE (0XF504) +#define PROC_MEM_TECH_MTTECC_FILECODE (0XF505) +#define PROC_MEM_TECH_MTTHRC_FILECODE (0XF506) +#define PROC_MEM_TECH_MTTML_FILECODE (0XF507) +#define PROC_MEM_TECH_MTTOPTSRC_FILECODE (0XF509) +#define PROC_MEM_TECH_MTTSRC_FILECODE (0XF50B) +#define PROC_MEM_TECH_MTTEDGEDETECT_FILECODE (0XF50C) +#define PROC_MEM_TECH_DDR3_MT3_FILECODE (0XF581) +#define PROC_MEM_TECH_DDR3_MTOT3_FILECODE (0XF583) +#define PROC_MEM_TECH_DDR3_MTRCI3_FILECODE (0XF584) +#define PROC_MEM_TECH_DDR3_MTSDI3_FILECODE (0XF585) +#define PROC_MEM_TECH_DDR3_MTSPD3_FILECODE (0XF586) +#define PROC_MEM_TECH_DDR3_MTTWL3_FILECODE (0XF587) +#define PROC_MEM_TECH_DDR3_MTTECC3_FILECODE (0XF588) +#define PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE (0XF589) +#define PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE (0XF58A) +#define PROC_MEM_TECH_MTTRDDQS2DTRAINING_FILECODE (0XF58B) +#define PROC_MEM_TECH_MTTRDDQS2DEYERIMSEARCH_FILECODE (0XF58C) + +#define PROC_MEM_X86_MEMINITLIBX86_FILECODE (0xF590) +#define PROC_MEM_A57_MEMINITLIBA57_FILECODE (0xF591) + +#define PROC_RECOVERY_MEM_MRDEF_FILECODE (0XF801) +#define PROC_RECOVERY_MEM_MRINIT_FILECODE (0XF802) +#define PROC_RECOVERY_MEM_MRM_FILECODE (0XF803) +#define PROC_RECOVERY_MEM_MRUC_FILECODE (0XF804) +#define PROC_RECOVERY_MEM_TECH_MRTTPOS_FILECODE (0XF8C1) +#define PROC_RECOVERY_MEM_TECH_MRTTSRC_FILECODE (0XF8C2) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRT3_FILECODE (0XF8C3) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE (0XF8C4) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSDI3_FILECODE (0XF8C5) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSPD3_FILECODE (0XF8C6) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTTWL3_FILECODE (0XF8C7) +#define PROC_RECOVERY_MEM_NB_MRN_FILECODE (0XF8C8) +#define PROC_RECOVERY_MEM_NB_MRNDCT_FILECODE (0XF8C9) +#define PROC_RECOVERY_MEM_NB_MRNMCT_FILECODE (0XF8CA) +#define PROC_RECOVERY_MEM_NB_MRNTRAIN3_FILECODE (0XF8CB) +#define PROC_RECOVERY_MEM_TECH_MRTTHRC_FILECODE (0XF8CC) +#define PROC_RECOVERY_MEM_PS_MRP_FILECODE (0XF8E0) +#define PROC_RECOVERY_MEM_PS_MRPRTT_FILECODE (0XF8E1) +#define PROC_RECOVERY_MEM_PS_MRPODTPAT_FILECODE (0XF8E2) +#define PROC_RECOVERY_MEM_PS_MRPSAO_FILECODE (0XF8E3) +#define PROC_RECOVERY_MEM_PS_MRPMR0_FILECODE (0XF8E4) +#define PROC_RECOVERY_MEM_PS_MRPRC2IBT_FILECODE (0XF8E5) +#define PROC_RECOVERY_MEM_PS_MRPRC10OPSPD_FILECODE (0XF8E6) +#define PROC_RECOVERY_MEM_PS_MRPLRIBT_FILECODE (0XF8E7) +#define PROC_RECOVERY_MEM_PS_MRPLRNPR_FILECODE (0XF8E8) +#define PROC_RECOVERY_MEM_PS_MRPLRNLR_FILECODE (0XF8E9) +#define PROC_RECOVERY_MEM_TECH_MRTTHRCSEEDTRAIN_FILECODE (0XF8FA) + +//Psp +#define PROC_PSP_PSPBASELIB_PSPBASELIB_FILECODE (0xFA20) + +#endif // _FILECODE_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/GeneralServices.h b/src/vendorcode/amd/pi/00660F01/Include/GeneralServices.h new file mode 100644 index 0000000000..aea946a784 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/GeneralServices.h @@ -0,0 +1,222 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * General Services + * + * Provides Services similar to the external General Services API, except + * suited to use within AGESA components. Socket, Core and PCI identification. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Common + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _GENERAL_SERVICES_H_ +#define _GENERAL_SERVICES_H_ + +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +#define NUMBER_OF_EVENT_DATA_PARAMS 4 + +/** + * AMD Device id for MMIO check. + */ +#define AMD_DEV_VEN_ID 0x1022 +#define AMD_DEV_VEN_ID_ADDRESS 0 + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ + +/** + * An AGESA Event Log entry. + */ +typedef struct { + AGESA_STATUS EventClass; ///< The severity of the event, its associated AGESA_STATUS. + UINT32 EventInfo; ///< Uniquely identifies the event. + UINT32 DataParam1; ///< Event specific additional data + UINT32 DataParam2; ///< Event specific additional data + UINT32 DataParam3; ///< Event specific additional data + UINT32 DataParam4; ///< Event specific additional data +} AGESA_EVENT; + +/*---------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *---------------------------------------------------------------------------------------- + */ + +/** + * Get a specified Core's APIC ID. + * + * @param[in] StdHeader Header for library and services. + * @param[in] Socket The Core's Socket. + * @param[in] Core The Core id. + * @param[out] ApicAddress The Core's APIC ID. + * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds. + * + * @retval TRUE The core is present, APIC Id valid + * @retval FALSE The core is not present, APIC Id not valid. + */ +BOOLEAN +GetApicId ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT32 Socket, + IN UINT32 Core, + OUT UINT8 *ApicAddress, + OUT AGESA_STATUS *AgesaStatus +); + +/** + * Get Processor Module's PCI Config Space address. + * + * @param[in] StdHeader Header for library and services. + * @param[in] Socket The Core's Socket. + * @param[in] Module The Module in that Processor + * @param[out] PciAddress The Processor's PCI Config Space address (Function 0, Register 0) + * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds. + * + * @retval TRUE The core is present, PCI Address valid + * @retval FALSE The core is not present, PCI Address not valid. + */ +BOOLEAN +GetPciAddress ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT32 Socket, + IN UINT32 Module, + OUT PCI_ADDR *PciAddress, + OUT AGESA_STATUS *AgesaStatus +); + +/** + * "Who am I" for the current running core. + * + * @param[in] StdHeader Header for library and services. + * @param[out] Socket The current Core's Socket + * @param[out] Module The current Core's Processor Module + * @param[out] Core The current Core's core id. + * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds. + * + */ +VOID +IdentifyCore ( + IN AMD_CONFIG_PARAMS *StdHeader, + OUT UINT32 *Socket, + OUT UINT32 *Module, + OUT UINT32 *Core, + OUT AGESA_STATUS *AgesaStatus +); + +/*---------------------------------------------------------------------------------------*/ +/** + * Is this the BSP core? + * + * @param[in,out] StdHeader Header for library and services + * + * @retval TRUE Is BSP core + * @retval FALSE Is not BSP Core + * + */ +BOOLEAN +IsBsp ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * This function logs AGESA events into the event log. + */ +VOID +PutEventLog ( + IN AGESA_STATUS EventClass, + IN UINT32 EventInfo, + IN UINT32 DataParam1, + IN UINT32 DataParam2, + IN UINT32 DataParam3, + IN UINT32 DataParam4, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * This function gets event logs from the circular buffer. + */ +AGESA_STATUS +GetEventLog ( + OUT AGESA_EVENT *EventRecord, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * This function gets event logs from the circular buffer without flushing the entry. + */ +BOOLEAN +PeekEventLog ( + OUT AGESA_EVENT *EventRecord, + IN UINT16 Index, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/*---------------------------------------------------------------------------------------*/ +/** + * This routine programs the registers necessary to get the PCI MMIO mechanism + * up and functioning. + */ +VOID +InitializePciMmio ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/*---------------------------------------------------------------------------------------*/ +/** + * + * Is it SecureS3 + * + * @param[in] StdHeader Header for library and services + * + * @retval TRUE It's SecureS3 + * @retval FALSE It's NOT SecureS3 + * + */ +BOOLEAN +IsSecureS3 ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif // _GENERAL_SERVICES_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/Ids.h b/src/vendorcode/amd/pi/00660F01/Include/Ids.h new file mode 100644 index 0000000000..cb101869e3 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/Ids.h @@ -0,0 +1,1484 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA Integrated Debug Macros + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 309899 $ @e \$Date: 2014-12-23 02:21:13 -0600 (Tue, 23 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + /* Macros to aid debugging */ + /* These definitions expand to zero (0) bytes of code when disabled */ + +#ifndef _IDS_H_ +#define _IDS_H_ + +#undef FALSE +#undef TRUE +#define FALSE 0 +#define TRUE 1 +// Proto type for optionsids.h +typedef UINT32 IDS_STATUS; ///< Status of IDS function. +#define IDS_SUCCESS ((IDS_STATUS) 0x00000000ul) ///< IDS Function is Successful. +#define IDS_UNSUPPORTED ((IDS_STATUS) 0xFFFFFFFFul) ///< IDS Function is not existed. + +#define IDS_STRINGIZE(a) #a ///< for define stringize macro +#ifndef IDS_DEADLOOP + #define IDS_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif +/** + * IDS Option Hook Points + * + * These are the values to indicate hook point in AGESA for IDS Options. + * + */ +typedef enum { //vv- for debug reference only + IDS_INIT_EARLY_BEFORE, ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY. + ///< IDS Object is initialized. + ///< Override CPU Core Leveling Mode. + ///< Set P-State in Post + IDS_INIT_EARLY_AFTER, ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY. + IDS_INIT_LATE_BEFORE, ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE. + ///< It will be used to control the following tables. + ///< ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC) + ///< ACPI WHEA Table + ///< DMI Table + IDS_INIT_LATE_AFTER, ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE. + IDS_INIT_MID_BEFORE, ///< 04 Option Hook Point before AGESA function AMD_INIT_MID. + IDS_INIT_MID_AFTER, ///< 05 Option Hook Point after AGESA function AMD_INIT_MID. + IDS_INIT_POST_BEFORE, ///< 06 Option Hook Point before AGESA function AMD_INIT_POST. + ///< Control Interleaving and DRAM memory hole + ///< Override the setting of ECC Control + ///< Override the setting of Online Spare Rank + IDS_INIT_POST_AFTER, ///< 07 Option Hook Point after AGESA function AMD_INIT_POST. + IDS_INIT_RESET_BEFORE, ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET. + IDS_INIT_RESET_AFTER, ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET. + IDS_INIT_POST_MID, ///< 0a Option Hook Point after AGESA function AMD_INIT_POST. + IDS_BEFORE_S3_SAVE, ///< 0b override any settings before S3 save. + IDS_BEFORE_S3_RESTORE, ///< 0c override any settings before S3 restore + IDS_AFTER_S3_SAVE, ///< 0d Override any settings after S3 save + IDS_AFTER_S3_RESTORE, ///< 0e Override any settings after S3 restore + IDS_BEFORE_DQS_TRAINING, ///< 0f override any settings before DQS training + IDS_BEFORE_DRAM_INIT, ///< 10 override any settings before Dram initialization + IDS_BEFORE_MEM_FREQ_CHG, ///< 11 override settings before MemClk frequency change + IDS_BEFORE_WARM_RESET , ///< 12 Override PCI or MSR Registers Before Warm Reset + IDS_BEFORE_PCI_INIT, ///< 13 Override PCI or MSR Registers Before PCI Init + IDS_BEFORE_AP_EARLY_HALT, ///< 14 Option Hook Point before AP early halt + IDS_BEFORE_S3_RESUME, ///< 15 Option Hook Point before s3 resume + IDS_AFTER_S3_RESUME, ///< 16 Option Hook Point after s3 resume + IDS_BEFORE_PM_INIT, ///< 17 Option Hook Point Before Pm Init + + IDS_INIT_RTB_BEFORE, ///< 18 Option Hook Point before AGESA function AMD_INIT_RTB. + IDS_INIT_RTB_AFTER, ///< 19 Option Hook Point after AGESA function AMD_INIT_RTB. + + IDS_MT_BASE = 0x20, ///< 0x20 ~ 0x38 24 time points reserved for MTTime + + IDS_PLATFORM_RSVD1 = 0x38, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD2 = 0x39, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD3 = 0x3a, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD4 = 0x3b, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD5 = 0x3c, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD6 = 0x3d, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD7 = 0x3e, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD8 = 0x3f, ///< from 0x38 to 0x3f will reserved for platform used + + // All the above timing point is used by BVM, their value should never be changed + IDS_INIT_DRAM_TABLE, ///< 40 Generate override table for Dram Timing + ///< Dram Controller, Drive Strength and DQS Timing + IDS_GET_DRAM_TABLE, ///< 41 Generate override table for Dram Timing + IDS_GANGING_MODE, ///< 42 override Memory Mode Unganged + IDS_POWERDOWN_MODE, ///< 43 override Power Down Mode + IDS_BURST_LENGTH32, ///< 44 override Burst Length32 + IDS_ALL_MEMORY_CLOCK, ///< 45 override All Memory Clks Enable + IDS_ECC, ///< 46 override ECC parameter + IDS_ECCSYMBOLSIZE, ///< 47 override ECC symbol size + IDS_CPU_Early_Override, ///< 48 override CPU early parameter + IDS_CACHE_FLUSH_HLT, ///< 49 override Cache Flush Hlt + IDS_CHANNEL_INTERLEAVE, ///< 4a override Channel Interleave + IDS_MEM_ERROR_RECOVERY, ///< 4b override memory error recovery + IDS_MEM_RETRAIN_TIMES, ///< 4c override memory retrain times + IDS_MEM_SIZE_OVERLAY, ///< 4d Override the syslimit + IDS_CHECK_NEGATIVE_WL, ///< 4e Check for negative write leveling result + IDS_DLL_SHUT_DOWN, ///< 4f Check for Dll Shut Down + IDS_POR_MEM_FREQ, ///< 50 Entry to enable/disable MemClk frequency enforcement + IDS_PHY_DLL_STANDBY_CTRL, ///< 51 Enable/Disable Phy DLL standby feature + IDS_PLATFORMCFG_OVERRIDE, ///< 52 Hook for Override PlatformConfig structure + IDS_LOADCARD_ERROR_RECOVERY, ///< 53 Special error handling for load card support + IDS_MEM_IGNORE_ERROR, ///< 54 Ignore error and do not do fatal exit in memory + IDS_GNB_SMU_SERVICE_CONFIG, ///< 55 Config GNB SMU service + IDS_GNB_ORBDYNAMIC_WAKE, ///< 56 config GNB dynamic wake + IDS_GNB_PLATFORMCFG_OVERRIDE, ///< 57 override ids gnb platform config + IDS_GNB_LCLK_DPM_EN, ///< 58 override GNB LCLK DPM configuration + IDS_GNB_LCLK_DEEP_SLEEP, ///< 59 override GNB LCLK DPM deep sleep + IDS_GNB_CLOCK_GATING, ///< 5a Override GNB Clock gating config + IDS_NB_PSTATE_DIDVID, ///< 5b Override NB P-state settings + IDS_CPB_CTRL, ///< 5c Config the Core peformance boost feature + IDS_HTC_CTRL, ///< 5d Hook for Hardware Thermal Control + IDS_CC6_WORKAROUND, ///< 5e Hook for skip CC6 work around + IDS_MEM_MR0, ///< 5f Hook for override Memory Mr0 register + IDS_TRAP_TABLE, ///< 60 Hook for add IDS register table to the loop + IDS_NBBUFFERALLOCATIONATEARLY, ///< 61 Hook for override North bridge bufer allocation + IDS_BEFORE_S3_SPECIAL, ///< 62 Hook to bypass S3 special functions + IDS_SET_PCI_REGISTER_ENTRY, ///< 63 Hook to SetRegisterForPciEntry + IDS_ERRATUM463_WORKAROUND, ///< 64 Hook to Erratum 463 workaround + IDS_BEFORE_MEMCLR, ///< 65 Hook before set Memclr bit + IDS_OVERRIDE_IO_CSTATE, ///< 66 Hook for override io C-state setting + IDS_NBPSDIS_OVERRIDE, ///< 67 Hook for override NB pstate disable setting + IDS_NBPS_REG_OVERRIDE, ///< 68 Hook for override Memory NBps reg + IDS_MEM_PHY_POWER_SAVING, ///< 69 Hook to bypass DRAM Phy power savings + IDS_CST_CREATE, ///< 6a Hook for create _CST + IDS_CST_SIZE, ///< 6b Hook for get _CST size + IDS_ENFORCE_VDDIO, ///< 6c Hook to override VDDIO + IDS_STRETCH_FREQUENCY_LIMIT, ///< 6d Hook for enforcing memory stretch frequency limit + IDS_INIT_MEM_REG_TABLE, ///< 6e Hook for init memory register table + IDS_SKIP_FUSED_MAX_RATE, ///< 6f Hook to skip fused max rate cap + IDS_FCH_INIT_AT_RESET, ///< 70 Hook for FCH reset parameter + IDS_FCH_INIT_AT_ENV, ///< 71 Hook for FCH ENV parameter + IDS_ENFORCE_PLAT_TABLES, ///< 72 Hook to enforce platform specific tables + IDS_NBPS_MIN_FREQ, ///< 73 Hook for override MIN nb ps freq + IDS_GNB_FORCE_CABLESAFE, ///< 74 Hook for override Force Cable Safe + IDS_SKIP_PM_TRANSITION_STEP, ///< 75 Hook for provide IDS ability to skip this PM step + IDS_GNB_PROPERTY, ///< 76 Hook for GNB Property + IDS_GNB_PCIE_POWER_GATING, ///< 77 Hook for GNB PCIe Power Gating + IDS_MEM_DYN_DRAM_TERM, ///< 78 Hook for Override Dynamic Dram Term + IDS_MEM_DRAM_TERM, ///< 79 Hook for Override Dram Term + IDS_GNB_ALTVDDNB, ///< 7a Hook for Override AltVddNB + IDS_UCODE, ///< 7b Enable or Disable microcode patching + IDS_FAM_REG_GMMX, ///< 7c GMMX register access + IDS_MEMORY_POWER_POLICY, ///< 7d Memory power policy + IDS_GET_STRETCH_FREQUENCY_LIMIT, ///< 7e Hook for enforcing memory stretch frequency limit + IDS_CPU_FEAT, ///< 7f Hook for runtime force cpu feature disable + IDS_AFTER_DCT_PHY_ACCESS, ///< 80 Hook for DctAccessDone check + IDS_FORCE_PHY_TO_M0, ///< 81 Hook to bypass M0 enforcement + IDS_GNB_PMM_SWTJOFFSET, ///< 82 Hook to GNBSWTJOFFSET + IDS_LOCK_DRAM_CFG, ///< 83 Hook to BFLockDramCfg + IDS_BEFORE_GEN2_INIT, ///< 84 Hook to Before Gen2 Init + IDS_BEFORE_GPP_TRAINING, ///< 85 Hook to Before Gpp training + IDS_BEFORE_RECONFIGURATION, ///< 86 Hook to Before Reconfiguration + IDS_BEFORE_GEN3_INIT, ///< 87 Hook to Before Gen3 Init + IDS_BEFORE_POWER_GATING, ///< 88 Hook to Before Power Gating + IDS_AFTER_EARLY_INIT_ONCORE, ///< 89 Hook to after EarlyInit On Core + IDS_GNB_PCIE_PORT_REMAP, ///< 8a Hook to change mapping of PCIe devices + IDS_ECC_CONTROL, ///< 8b Enable/Disable ECC feature + IDS_GNB_PCIE_PHY_ISOLATION, ///< 8c Enable/Disable PCIE PHY ISOLATION + IDS_AFTER_RESTORING_PCI_REG, ///< 8d Hook after restoring PCI register during S3 resume + IDS_MSR_ACCESS_OVERRIDE, ///< 8e Hook to disable MSR access + IDS_REPORT_SMU_FW_VERSION, ///< 8f Hook to report SMU firmware version + IDS_GNB_LOAD_SAMU_PATCH, ///< 90 Hook to Load SAMU patch + IDS_DLLSTAGGERDLY_OVERRIDE, ///< 91 Hook to skip Dll Stagger Delay + IDS_CSAMPLE_TIMER, ///< 92 Hook to override CSampleTimer + IDS_PIPE_THROTTLE, ///< 93 Hook to override PipeThrottle + IDS_GNB_PMM_NATIVEGEN1PLL, ///< 94 Enable/Disable Native Gen1 PLL + IDS_BEFORE_PLAT_TABLES, ///< 95 Hook before processing platform specific tables + IDS_GNB_PCIE_MASTERPLL_SELECTION, ///< 96 Hook to override PCIe Master PLL selection + IDS_GNB_PCIE_PHYLANE_CONFIG, ///< 97 Hook to override PCIe PhyLane configuration + IDS_DSM_LP_SELECTION, ///< 98 Set Dsm low power mode + IDS_GNB_EQUAL_PRESET, ///< 99 Set equalization preset + IDS_GNB_GEN1_LOOPBACK, ///< 9a Override Gen 1 loopback mode + IDS_GNB_SMU_SERVICE_MASK, ///< 9b Override SMU service enablement mask + IDS_BEFORE_HT_MEM_MAP, ///< 9c Hook before mapping memory address space among DCTs + IDS_GNB_GEN3_SETTINGS_OVERRIDE, ///< 9d Hook to override Gen3 Adapt PI Offset Bypass Enable + IDS_GNB_TARGET_TDP, ///< 9e Hook to override Target TDP + IDS_GNB_SMU_PORT80_PARAMS, ///< 9f Hook to override gnb smu port80 values + IDS_CPU_OVERRIDE_REG_AFTER_AP_LAUNCH, ///< a0 Hook to override registers after AP lauch + IDS_AFTER_FEAT_MID_INIT, ///< a1 Hook to override feature setting after cpuMidInit + IDS_MEM_MCLK_ABOVE_NCLK, ///< a2 Hook to bypass system bandwidth for memory clock + IDS_ALL_MEMORY_CKE, ///< a3 override All Memory CKE + IDS_ALL_MEMORY_CS, ///< a4 override All Memory CS + IDS_NPST, ///< a5 cTDP NbPstate Selection Table + IDS_MEM_MRL_RETRAIN_TIMES, ///< a6 override memory MRL retrain times + IDS_AFTER_DQS_TRAINING, ///< a7 override any settings after DQS training + IDS_OVERRIDE_DIMM_MASK, ///< a8 override DimmMask for S3 data blob creation + IDS_BYPASS_S3_REGISTERS, ///< a9 bypass restoring certain registers + IDS_OPTION_END ///< AA End of IDS option +} AGESA_IDS_OPTION; + +#include "OptionsIds.h" +#include "Filecode.h" +#include "IdsPerf.h" + +/* Initialize IDS controls */ +#ifndef IDSOPT_IDS_ENABLED + #define IDSOPT_IDS_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_ENABLED + #define IDSOPT_CONTROL_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_NV_TO_CMOS + #define IDSOPT_CONTROL_NV_TO_CMOS FALSE +#endif + +#ifndef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE +#endif + +#ifndef IDSOPT_TRACE_USER_OPTIONS + #define IDSOPT_TRACE_USER_OPTIONS TRUE +#endif + +#ifndef IDSOPT_PERF_ANALYSIS + #define IDSOPT_PERF_ANALYSIS FALSE +#endif + +#ifndef IDSOPT_HEAP_CHECKING + #define IDSOPT_HEAP_CHECKING FALSE +#endif + +#ifndef IDSOPT_ASSERT_ENABLED + #define IDSOPT_ASSERT_ENABLED FALSE +#endif + +#ifndef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED FALSE +#endif + +#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE +#endif + +#ifndef IDSOPT_DEBUG_CODE_ENABLED + #define IDSOPT_DEBUG_CODE_ENABLED FALSE +#endif + +#ifndef IDSOPT_IDT_EXCEPTION_TRAP + #define IDSOPT_IDT_EXCEPTION_TRAP FALSE +#endif + +#ifndef IDSOPT_C_OPTIMIZATION_DISABLED + #define IDSOPT_C_OPTIMIZATION_DISABLED FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT TRUE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IDSOPT_CONTROL_ENABLED + #undef IDSOPT_TRACING_ENABLED + #undef IDSOPT_PERF_ANALYSIS + #undef IDSOPT_HEAP_CHECKING + #undef IDSOPT_ASSERT_ENABLED + #undef IDSOPT_ERROR_TRAP_ENABLED + #undef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #undef IDSOPT_DEBUG_CODE_ENABLED + #undef IDSOPT_TRACE_USER_OPTIONS + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #undef IDSOPT_TRACING_CONSOLE_RAM + + #define IDSOPT_CONTROL_ENABLED FALSE + #define IDSOPT_TRACING_ENABLED FALSE + #define IDSOPT_PERF_ANALYSIS FALSE + #define IDSOPT_HEAP_CHECKING FALSE + #define IDSOPT_ASSERT_ENABLED FALSE + #define IDSOPT_ERROR_TRAP_ENABLED FALSE + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE + #define IDSOPT_DEBUG_CODE_ENABLED FALSE + #define IDSOPT_TRACE_USER_OPTIONS FALSE + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable when master token Tracing is set to FALSE +#if (IDSOPT_TRACING_ENABLED == FALSE) || (defined (IDSOPT_CUSTOMIZE_TRACING_SERVICE)) + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + + #undef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable Tracing if all support HW layer set to FALSE +#if ((IDSOPT_TRACING_CONSOLE_HDTOUT == FALSE) && (IDSOPT_TRACING_CONSOLE_SERIALPORT == FALSE) && (IDSOPT_TRACING_CONSOLE_REDIRECT_IO == FALSE) && (IDSOPT_TRACING_CONSOLE_RAM == FALSE)) + #ifndef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE + #endif +#endif +/** + * Make a Progress Report to the User. + * + * This Macro is always enabled. The default action is to write the TestPoint value + * to an I/O port. The I/O port is 8 bits in size and the default address is 0x80. + * IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port + * in OptionsIds.h in their build tip. + * + * @param[in] TestPoint The value for display indicating progress + * @param[in,out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + **/ + +#define AGESA_TESTPOINT(TestPoint, StdHeader) IdsAgesaTestPoint ((TestPoint), (StdHeader)) + +#ifndef IDS_DEBUG_PORT + #define IDS_DEBUG_PORT 0x80 +#endif + +#if IDS_DEBUG_PORT > 0xFFFFul + #error "Invalid debug port defined. IDS_DEBUG_PORT address must not be larger than 16 bits." +#endif + +#ifndef IDS_DEBUG_PORT_SIZE_IN_BYTES + #define IDS_DEBUG_PORT_SIZE_IN_BYTES 4 +#endif + +#if IDS_DEBUG_PORT_SIZE_IN_BYTES == 1 + #define IDS_DEBUG_PORT_ACCESSWIDTH AccessWidth8 + #ifndef IDS_DEBUG_TP_PREFIX + #define IDS_DEBUG_TP_PREFIX 0x00ul + #endif + #if IDS_DEBUG_TP_PREFIX != 0 + #error "Invalid debug port prefix defined. IDS_DEBUG_TP_PREFIX << 8 must not exceed IDS_DEBUG_PORT_SIZE_IN_BYTES." + #endif +#else + #if IDS_DEBUG_PORT_SIZE_IN_BYTES == 2 + #define IDS_DEBUG_PORT_ACCESSWIDTH AccessWidth16 + #ifndef IDS_DEBUG_TP_PREFIX + #define IDS_DEBUG_TP_PREFIX 0xA0ul + #endif + #if IDS_DEBUG_TP_PREFIX > 0xFFul + #error "Invalid debug port prefix defined. IDS_DEBUG_TP_PREFIX << 8 must not exceed IDS_DEBUG_PORT_SIZE_IN_BYTES." + #endif + #else + #if IDS_DEBUG_PORT_SIZE_IN_BYTES == 4 + #define IDS_DEBUG_PORT_ACCESSWIDTH AccessWidth32 + #ifndef IDS_DEBUG_TP_PREFIX + #define IDS_DEBUG_TP_PREFIX 0xA9E5A0ul + #endif + #if IDS_DEBUG_TP_PREFIX > 0xFFFFFFul + #error "Invalid debug port prefix defined. IDS_DEBUG_TP_PREFIX << 8 must not exceed IDS_DEBUG_PORT_SIZE_IN_BYTES." + #endif + #else + #error "Invalid debug port size defined. Acceptable values of IDS_DEBUG_PORT_SIZE_IN_BYTES are 1, 2, or 4." + #endif + #endif +#endif + +#if (IDS_DEBUG_PORT & (IDS_DEBUG_PORT_SIZE_IN_BYTES - 1)) != 0 + #error "IDS_DEBUG_PORT must be aligned on IDS_DEBUG_PORT_SIZE_IN_BYTES boundary." +#endif + +/** + * @def STOP_HERE + * (macro) - Causes program to halt. This is @b only for use during active debugging . + * + * Causes the program to halt and display the file number of the source of the + * halt (displayed in decimal). + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + #define STOP_HERE IdsErrorStop (STOP_CODE); +#else + #define STOP_HERE STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds." +#endif + +/** + * @def ASSERT + * Test an assertion that the given statement is True. + * + * The statement is evaluated to a boolean value. If the statement is True, + * then no action is taken (no error). If the statement is False, a error stop + * is generated to halt the program. Used for testing for fatal errors that + * must be resolved before production. This is used to do parameter checks, + * bounds checking, range checks and 'sanity' checks. + * + * @param[in] conditional Assert that evaluating this conditional results in TRUE. + * + **/ +#ifndef ASSERT + #if IDSOPT_ASSERT_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE)); + #else + #define ASSERT(conditional) + #endif +#endif + +#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE + #undef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED TRUE + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) IdsCarCorruptionCheck(StdHeader) +#else + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) +#endif +/** + * @def DEBUG_CODE + * Make the code active when IDSOPT_DEBUG_CODE_ENABLED enable + * + */ +#ifndef DEBUG_CODE + #if IDSOPT_DEBUG_CODE_ENABLED == TRUE + #define DEBUG_CODE(Code) Code + #else + #define DEBUG_CODE(Code) + #endif +#endif + +/** + * @def IDS_ERROR_TRAP + * Trap AGESA Error events with stop code display. + * + * Works similarly to use of "ASSERT (FALSE);" + * + */ +#if IDSOPT_ERROR_TRAP_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_ERROR_TRAP IdsErrorStop (STOP_CODE) +#else + #define IDS_ERROR_TRAP +#endif + +///give the extended Macro default value +#ifndef __IDS_EXTENDED__ + #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS + #define IDS_TRACE_DEFAULT (0) + #define IDS_INITIAL_F15_CZ_PM_STEP + #define IDS_F15_CZ_PM_CUSTOM_STEP + #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader) + #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader) + #define IDS_EXTENDED_HEAP_SIZE 0 + #define IDS_EXT_INCLUDE_F15(file) + #define IDS_EXT_INCLUDE(file) + #define IDS_PAD_4K + #define IDS_EXTENDED_CODE(code) + #define SMU_FIRMWARE_PADS_1K +#endif + +#ifndef IDS_NUM_NV_ITEM + #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM) +#endif + +#define IDS_CMOS_INDEX_PORT 0x70 +#define IDS_CMOS_DATA_PORT 0x71 +#define IDS_CMOS_REGION_START 0x20 +#define IDS_CMOS_REGION_END 0x7F +#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) \ + AmdIdsCtrlDispatcher ((IdsOption), (DataPtr), (StdHeader)) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) \ + IdsOptionCallout ((CallOutId), (DataPtr), (StdHeader)) + #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE + #undef IDS_AP_GET_NV_FROM_CMOS + #define IDS_AP_GET_NV_FROM_CMOS(x) AmdIdsApGetNvFromCmos(x) + #ifdef IDS_OPT_CMOS_INDEX_PORT + #undef IDS_CMOS_INDEX_PORT + #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT + #endif + + #ifdef IDS_OPT_CMOS_DATA_PORT + #undef IDS_CMOS_DATA_PORT + #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT + #endif + + #ifdef IDS_OPT_CMOS_REGION_START + #undef IDS_CMOS_REGION_START + #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START + #endif + + #ifdef IDS_OPT_CMOS_REGION_END + #undef IDS_CMOS_REGION_END + #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END + #endif + #endif +#else + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) AGESA_SUCCESS +#endif + +/** + * Macro to add a *skip* hook for IDS options + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, IDS dispatcher function will be called to perform + * the detailed action and to skip AGESA code if necessary. + * + * @param[in] IdsOption IDS Option ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) \ + if (AmdIdsCtrlDispatcher (IdsOption, DataPtr, StdHeader) == IDS_SUCCESS) +#else + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) +#endif + +/** + * Macro to add a heap manager routine + * + * when memory is allocated the heap manager actually allocates two extra dwords of data, + * one dword buffer before the actual memory, and one dword afterwards. + * a complete heap walk and check to be performed at any time. + * it would ASSERT if the heap is corrupt + * + * @param[in] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +// Heap debug feature +#define SENTINEL_BEFORE_VALUE 0x64616548ul // "Head" +#define SENTINEL_AFTER_VALUE 0x6C696154ul // "Tail" +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_HEAP_CHECKING == TRUE + #define SIZE_OF_SENTINEL 4 + #define NUM_OF_SENTINEL 2 // Before ("Head") and After ("Tail") + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE); + #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE); + #define Heap_Check(stdheader) AmdHeapIntactCheck(stdheader) + #else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) + #endif +#else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) +#endif + +/** + * Macro to add IDT for debugging exception. + * + * A debug feature. Adding a 'jmp $' into every exception handler. + * So debugger could use HDT to skip 'jmp $' and execute the iret, + * then they could find which instruction cause the exception. + * + * @param[in] FunctionId IDS Function ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) IdsExceptionTrap (FunctionId, DataPtr, StdHeader) + #else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) + #endif +#else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) +#endif + + + //Note a is from 0 to 63 +#define DEBUG_PRINT_SHIFT(a) ((UINT64)1 << a) +//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly +//Memory Masks +#define MEM_SETREG DEBUG_PRINT_SHIFT (0) +#define MEM_GETREG DEBUG_PRINT_SHIFT (1) +#define MEM_FLOW DEBUG_PRINT_SHIFT (2) +#define MEM_STATUS DEBUG_PRINT_SHIFT (3) +#define MEM_UNDEF_BF DEBUG_PRINT_SHIFT (4) +#define MEMORY_TRACE_RSV2 DEBUG_PRINT_SHIFT (5) +#define MEMORY_TRACE_RSV3 DEBUG_PRINT_SHIFT (6) +#define MEMORY_TRACE_RSV4 DEBUG_PRINT_SHIFT (7) +#define MEMORY_TRACE_RSV5 DEBUG_PRINT_SHIFT (8) +#define MEMORY_TRACE_RSV6 DEBUG_PRINT_SHIFT (9) + +//CPU Masks +#define CPU_TRACE DEBUG_PRINT_SHIFT (10) +#define CPU_TRACE_RSV1 DEBUG_PRINT_SHIFT (11) +#define CPU_TRACE_RSV2 DEBUG_PRINT_SHIFT (12) +#define CPU_TRACE_RSV3 DEBUG_PRINT_SHIFT (13) +#define CPU_TRACE_RSV4 DEBUG_PRINT_SHIFT (14) +#define CPU_TRACE_RSV5 DEBUG_PRINT_SHIFT (15) +#define CPU_TRACE_RSV6 DEBUG_PRINT_SHIFT (16) +#define CPU_TRACE_RSV7 DEBUG_PRINT_SHIFT (17) +#define CPU_TRACE_RSV8 DEBUG_PRINT_SHIFT (18) +#define CPU_TRACE_RSV9 DEBUG_PRINT_SHIFT (19) + +//GNB Masks +#define GNB_TRACE DEBUG_PRINT_SHIFT (20) +#define PCIE_MISC DEBUG_PRINT_SHIFT (21) +#define PCIE_PORTREG_TRACE DEBUG_PRINT_SHIFT (22) +#define PCIE_HOSTREG_TRACE DEBUG_PRINT_SHIFT (23) +#define GNB_TRACE_RSV2 DEBUG_PRINT_SHIFT (24) +#define NB_MISC DEBUG_PRINT_SHIFT (25) +#define GNB_TRACE_RSV3 DEBUG_PRINT_SHIFT (26) +#define GFX_MISC DEBUG_PRINT_SHIFT (27) +#define NB_SMUREG_TRACE DEBUG_PRINT_SHIFT (28) +#define GNB_TRACE_RSV1 DEBUG_PRINT_SHIFT (29) + +//Topology Masks +#define TOPO_TRACE DEBUG_PRINT_SHIFT (30) +#define TOPO_TRACE_RSV1 DEBUG_PRINT_SHIFT (31) +#define TOPO_TRACE_RSV2 DEBUG_PRINT_SHIFT (32) +#define TOPO_TRACE_RSV3 DEBUG_PRINT_SHIFT (33) +#define TOPO_TRACE_RSV4 DEBUG_PRINT_SHIFT (34) +#define TOPO_TRACE_RSV5 DEBUG_PRINT_SHIFT (35) +#define TOPO_TRACE_RSV6 DEBUG_PRINT_SHIFT (36) +#define TOPO_TRACE_RSV7 DEBUG_PRINT_SHIFT (37) +#define TOPO_TRACE_RSV8 DEBUG_PRINT_SHIFT (38) +#define TOPO_TRACE_RSV9 DEBUG_PRINT_SHIFT (39) + +//FCH Masks +#define FCH_TRACE DEBUG_PRINT_SHIFT (40) +#define FCH_TRACE_RSV1 DEBUG_PRINT_SHIFT (41) +#define FCH_TRACE_RSV2 DEBUG_PRINT_SHIFT (42) +#define FCH_TRACE_RSV3 DEBUG_PRINT_SHIFT (43) +#define FCH_TRACE_RSV4 DEBUG_PRINT_SHIFT (44) +#define FCH_TRACE_RSV5 DEBUG_PRINT_SHIFT (45) +#define FCH_TRACE_RSV6 DEBUG_PRINT_SHIFT (46) +#define FCH_TRACE_RSV7 DEBUG_PRINT_SHIFT (47) +#define FCH_TRACE_RSV8 DEBUG_PRINT_SHIFT (48) +#define FCH_TRACE_RSV9 DEBUG_PRINT_SHIFT (49) + +//Other Masks +#define MAIN_FLOW DEBUG_PRINT_SHIFT (50) +#define EVENT_LOG DEBUG_PRINT_SHIFT (51) +#define PERFORMANCE_ANALYSE DEBUG_PRINT_SHIFT (52) + +//Ids Masks +#define IDS_TRACE DEBUG_PRINT_SHIFT (53) +#define BVM_TRACE DEBUG_PRINT_SHIFT (54) +#define IDS_TRACE_RSV2 DEBUG_PRINT_SHIFT (55) +#define IDS_TRACE_RSV3 DEBUG_PRINT_SHIFT (56) + +//S3 +#define S3_TRACE DEBUG_PRINT_SHIFT (57) + +//Library function to read/write PCI/MSR registers +#define LIB_PCI_RD DEBUG_PRINT_SHIFT (58) +#define LIB_PCI_WR DEBUG_PRINT_SHIFT (59) + +//AGESA test points +#define TEST_POINT DEBUG_PRINT_SHIFT (60) + +//Reserved for platform log +#define PLAT_RSV1 DEBUG_PRINT_SHIFT (61) +#define PLAT_RSV2 DEBUG_PRINT_SHIFT (62) +#define PLAT_RSV3 DEBUG_PRINT_SHIFT (63) + +#define GNB_TRACE_DEFAULT\ + (\ + GNB_TRACE | PCIE_MISC | NB_MISC | GFX_MISC \ + ) + +#define GNB_TRACE_REG\ + (\ + PCIE_PORTREG_TRACE | PCIE_HOSTREG_TRACE | \ + NB_SMUREG_TRACE | GNB_TRACE_RSV1 \ + ) + +#define GNB_TRACE_ALL\ + (\ + GNB_TRACE_DEFAULT | GNB_TRACE_REG \ + ) + +#define CPU_TRACE_ALL\ + (\ + CPU_TRACE | CPU_TRACE_RSV1 | CPU_TRACE_RSV2 | CPU_TRACE_RSV3 | \ + CPU_TRACE_RSV4 | CPU_TRACE_RSV5 | CPU_TRACE_RSV6 | CPU_TRACE_RSV7 | \ + CPU_TRACE_RSV8 | CPU_TRACE_RSV9\ + ) + +#define MEMORY_TRACE_ALL\ + (\ + MEM_FLOW | MEM_GETREG | MEM_SETREG | MEM_STATUS | \ + MEMORY_TRACE_RSV1 | MEMORY_TRACE_RSV2 | MEMORY_TRACE_RSV3 | MEMORY_TRACE_RSV4 | \ + MEMORY_TRACE_RSV5 | MEMORY_TRACE_RSV6\ + ) + +#define TOPO_TRACE_ALL\ + (\ + TOPO_TRACE | TOPO_TRACE_RSV1 | TOPO_TRACE_RSV2 | TOPO_TRACE_RSV3 | \ + TOPO_TRACE_RSV4 | TOPO_TRACE_RSV5 | TOPO_TRACE_RSV6 | TOPO_TRACE_RSV7 | \ + TOPO_TRACE_RSV8 | TOPO_TRACE_RSV9\ + ) + +#define FCH_TRACE_ALL\ + (\ + FCH_TRACE | FCH_TRACE_RSV1 | FCH_TRACE_RSV2 | FCH_TRACE_RSV3 | \ + FCH_TRACE_RSV4 | FCH_TRACE_RSV5 | FCH_TRACE_RSV6 | FCH_TRACE_RSV7 | \ + FCH_TRACE_RSV8 | FCH_TRACE_RSV9\ + ) + +#define IDS_TRACE_ALL\ + (\ + IDS_TRACE | BVM_TRACE | IDS_TRACE_RSV2 | IDS_TRACE_RSV3\ + ) + +#define OTHER_TRACE_ALL\ + (\ + MAIN_FLOW | EVENT_LOG | PERFORMANCE_ANALYSE\ + ) + + +#define TRACE_MASK_ALL (0xFFFFFFFFFFFFFFFFull) +#ifndef IDS_DEBUG_PRINT_MASK + #define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT | CPU_TRACE_ALL | MEM_FLOW | MEM_STATUS | TOPO_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT | MEM_GETREG) +#endif + +/// if no specific define INIT & EXIT will be NULL +#define IDS_HDT_CONSOLE_INIT(x) +#define IDS_HDT_CONSOLE_EXIT(x) + +/// AGESA tracing service +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef VA_ARGS_SUPPORTED + #if IDSOPT_C_OPTIMIZATION_DISABLED == TRUE + #define IDS_HDT_CONSOLE(f, s, ...) AmdIdsDebugPrint (f, s, __VA_ARGS__) + #else + #pragma warning(disable: 4127) + #define IDS_HDT_CONSOLE(f, s, ...) if (f == MEM_FLOW) AmdIdsDebugPrintMem (s, __VA_ARGS__); \ + else if (f == CPU_TRACE) AmdIdsDebugPrintCpu (s, __VA_ARGS__); \ + else if (f == TOPO_TRACE) AmdIdsDebugPrintTopology (s, __VA_ARGS__); \ + else if (f == GNB_TRACE) AmdIdsDebugPrintGnb (s, __VA_ARGS__); \ + else AmdIdsDebugPrint (f, s, __VA_ARGS__) + #endif + #else + #define IDS_HDT_CONSOLE AmdIdsDebugPrint + #endif + #define CONSOLE AmdIdsDebugPrintAll + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) Code + #define IDS_TIMEOUT_CTL(t) IdsMemTimeOut (t) +#else + #define IDS_HDT_CONSOLE 1 ? (VOID) 0 : AmdIdsDebugPrint + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) + #define CONSOLE CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds." + #define IDS_TIMEOUT_CTL(t) +#endif + +/// Macros for serial port tracing +#ifdef IDSOPT_SERIAL_PORT + #define IDS_SERIAL_PORT IDSOPT_SERIAL_PORT +#endif + +#ifndef IDS_SERIAL_PORT + #define IDS_SERIAL_PORT 0x3F8 +#endif + +// Macros for redirect IO tracing +#ifdef IDSOPT_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT IDSOPT_DEBUG_PRINT_IO_PORT +#endif + +#ifndef IDS_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT 0x80 +#endif + +#define IDS_DPRAM_BASE 0 +#define IDS_DPRAM_SIZE 0 +///Default policy, shift the old data when buffer full +#define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL FALSE +#if IDSOPT_TRACING_CONSOLE_RAM == TRUE + #ifdef IDSOPT_DPRAM_BASE + #undef IDS_DPRAM_BASE + #define IDS_DPRAM_BASE IDSOPT_DPRAM_BASE + #else + #error "Debug Print Ram Base not specified, please define IDSOPT_DPRAM_BASE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_SIZE + #undef IDS_DPRAM_SIZE + #define IDS_DPRAM_SIZE IDSOPT_DPRAM_SIZE + #else + #error "Debug Print Ram size not specified, please define IDSOPT_DPRAM_SIZE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #endif +#endif +/** + * Macros to add HDT OUT + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, the debug information can be displayed in HDT or other + * devices. + * + **/ +#if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE + #undef IDS_HDT_CONSOLE_INIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_INIT(x) AmdIdsHdtOutInit (x) + #define IDS_HDT_CONSOLE_EXIT(x) AmdIdsHdtOutExit (x) + #define IDS_HDT_CONSOLE_S3_EXIT(x) AmdIdsHdtOutS3Exit (x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) AmdIdsHdtOutS3ApExit (x) + + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) AmdIdsHdtOutBufferFlush (x) + #define IDS_HDT_CONSOLE_ASSERT(x) AmdIdsDebugPrintAssert (x) + #define IDS_FUNCLIST_ADDR ScriptFuncList + #define IDS_FUNCLIST_EXTERN() extern SCRIPT_FUNCTION ScriptFuncList[] +#else + #define IDS_HDT_CONSOLE_S3_EXIT(x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) + #define IDS_HDT_CONSOLE_ASSERT(x) + #define IDS_FUNCLIST_ADDR NULL + #define IDS_FUNCLIST_EXTERN() +#endif + +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDS_HDT_CONSOLE + #define IDS_HDT_CONSOLE IDSOPT_CUSTOMIZE_TRACING_SERVICE + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT + #undef IDS_HDT_CONSOLE_INIT + #define IDS_HDT_CONSOLE_INIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT (x) + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_EXIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT (x) + #endif +#endif + +#define IDS_TRACE_SHOW_BLD_OPT_CFG IDSOPT_TRACE_USER_OPTIONS + +#if IDSOPT_PERF_ANALYSIS == TRUE + #include "IdsPerf.h" + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_PERF_TIMESTAMP(ID, StdHeader) IdsPerfTimestamp (STOP_CODE, ID, (StdHeader)) + #define IDS_PERF_ANALYSE(StdHeader) IdsPerfAnalyseTimestamp (StdHeader) +#else + #define IDS_PERF_TIMESTAMP(ID, StdHeader) + #define IDS_PERF_ANALYSE(StdHeader) +#endif + +///For IDS feat use +#define IDS_FAMILY_ALL 0xFFFFFFFFFFFFFFFFull +#define IDS_BSP_ONLY TRUE +#define IDS_ALL_CORES FALSE + +#define IDS_LATE_RUN_AP_TASK_ID PROC_IDS_LIBRARY_IDSLIB_FILECODE + +#define IDS_CALLOUT_INIT 0x01 ///< The function data of IDS callout function of initialization. + +#define IDS_CALLOUT_GNB_PPFUSE_OVERRIDE 0x83 ///< The function data of IDS callout function of GNB pp fuse table. +#define IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG 0x84 ///< The function data of IDS callout function of GNB integrated table. +#define IDS_CALLOUT_GNB_NB_POWERGATE_CONFIG 0x85 ///< The function data of IDS callout function of GNB NB power gate config. +#define IDS_CALLOUT_GNB_PCIE_POWERGATE_CONFIG 0x86 ///< The function data of IDS callout function of GNB PCIE power gateconfig. +#define IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG 0x87 ///< The function data of IDS callout function of GNB pcie platform config. +#define IDS_CALLOUT_GNB_PCIE_PHY_CONFIG 0x88 ///< The function data of IDS callout function of GNB pcie PHY config. +#define IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE 0x89 ///< The function data of IDS callout function of GNB GMM register override +#define IDS_CALLOUT_FCH_INIT_RESET 0x8A ///< The function data of IDS callout function of FchInitReset +#define IDS_CALLOUT_FCH_INIT_ENV 0x8B ///< The function data of IDS callout function of FchInitEnv. +#define IDS_CALLOUT_POWER_PLAN_INIT 0x8C ///< The function data of IDS callout function of Override Power Plan Init +#define IDS_CALLOUT_GET_PERF_BUFFER 0x8D ///< The function data of IDS callout function of get platform performance buffer. +#define IDS_CALLOUT_GNB_PACKAGE_POWER_CONFIG 0x8E ///< The function data of IDS callout function of Bapm Package Power. +#define IDS_CALLOUT_SMU_PORT80_LOGGING_BUFFER 0x8F ///< The function data of IDS callout function of SMU port80 logging buffer. +#define IDS_CALLOUT_GNB_BEFORE_EARLY_INIT 0x90 ///< The function data of IDS callout function of GNB before early init. +#define IDS_CALLOUT_GNB_SMUBIOSTABLE_OVERRIDE 0x91 ///< The function data of IDS callout function of GNB smu bios table. +#define IDS_CALLOUT_GNB_PCIE_AER_CONFIG 0x92 ///< The function data of IDS callout function of GNB PCIE AER config. +#define IDS_CALLOUT_GNB_PCIE_EARLY_PORT_CONFIG 0x93 ///< The function data of IDS callout function of GNB pcie early port config. +#define IDS_CALLOUT_GNB_BUILDOPTIONS_OVERRIDE 0x94 ///< The function data of IDS callout function of GNB build options override. +#define IDS_CALLOUT_GNB_SMUFEATURES_MASK_OVERRIDE 0x95 ///< The function data of IDS callout function of GNB SMU Features MASK override. +#define IDS_CALLOUT_GNB_BEFORE_TXPRESET_LOADING 0x96 ///< The function data of IDS callout function of GNB pcie Tx preset loading sequence. + +/// Function entry for HDT script to call +typedef struct _SCRIPT_FUNCTION { + UINT32 FuncAddr; ///< Function address in ROM + CHAR8 FuncName[40]; ///< Function name +} SCRIPT_FUNCTION; + +/// Data Structure for Mem ECC parameter override +typedef struct { + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood +} ECC_OVERRIDE_STRUCT; + + + + +/** + * AGESA Test Points + * + * These are the values displayed to the user to indicate progress through boot. + * These can be used in a debug environment to stop the debugger at a specific + * test point: + * For SimNow!, this command + * bi 81 w vb 49 + * will stop the debugger on one of the TracePoints (49 is the TP value in this example). + * + */ +typedef enum { + StartProcessorTestPoints, ///< 00 Entry used for range testing for @b Processor related TPs + + // Memory test points + TpProcMemBeforeMemDataInit, ///< 01 .. Memory structure initialization (Public interface) + TpProcMemBeforeSpdProcessing, ///< 02 .. SPD Data processing (Public interface) + TpProcMemAmdMemAuto, ///< 03 .. Memory configuration (Public interface) + TpProcMemDramInit, ///< 04 .. DRAM initialization + TpProcMemSPDChecking, ///< 05 .. + TpProcMemModeChecking, ///< 06 .. + TpProcMemSpeedTclConfig, ///< 07 .. Speed and TCL configuration + TpProcMemSpdTiming, ///< 08 .. + TpProcMemDramMapping, ///< 09 .. + TpProcMemPlatformSpecificConfig, ///< 0A .. + TPProcMemPhyCompensation, ///< 0B .. + TpProcMemStartDcts, ///< 0C .. + TpProcMemBeforeDramInit, ///< 0D .. (Public interface) + TpProcMemPhyFenceTraining, ///< 0E .. + TpProcMemSynchronizeDcts, ///< 0F .. + TpProcMemSystemMemoryMapping, ///< 10 .. + TpProcMemMtrrConfiguration, ///< 11 .. + TpProcMemDramTraining, ///< 12 .. + TpProcMemBeforeAnyTraining, ///< 13 .. (Public interface) + TpProcMemWriteLevelizationTraining, ///< 14 .. + TpProcMemWlFirstPass, ///< 15 .. Below 800Mhz first pass start + TpProcMemWlSecondPass, ///< 16 .. Above 800Mhz second pass start + TpProcMemWlTrainTargetDimm, ///< 17 .. Target DIMM configured + TpProcMemWlPrepDimms, ///< 18 .. Prepare DIMMS for WL + TpProcMemWlConfigDimms, ///< 19 .. Configure DIMMS for WL + TpProcMemReceiverEnableTraining, ///< 1A .. + TpProcMemRcvrStartSweep, ///< 1B .. Start sweep loop + TpProcMemRcvrSetDelay, ///< 1C .. Set receiver Delay + TpProcMemRcvrWritePattern, ///< 1D .. Write test pattern + TpProcMemRcvrReadPattern, ///< 1E .. Read test pattern + TpProcMemRcvrTestPattern, ///< 1F .. Compare test pattern + TpProcMemRcvrCalcLatency, ///< 20 .. Calculate MaxRdLatency per channel + TpProcMemReceiveDqsTraining, ///< 21 .. + TpProcMemRcvDqsSetDelay, ///< 22 .. Set Write Data delay + TpProcMemRcvDqsWritePattern, ///< 23 .. Write test pattern + TpProcMemRcvDqsStartSweep, ///< 24 .. Start read sweep + TpProcMemRcvDqsSetRcvDelay, ///< 25 .. Set Receive DQS delay + TpProcMemRcvDqsReadPattern, ///< 26 .. Read Test pattern + TpProcMemRcvDqsTstPattern, ///< 27 .. Compare Test pattern + TpProcMemRcvDqsResults, ///< 28 .. Update results + TpProcMemRcvDqsFindWindow, ///< 29 .. Start Find passing window + TpProcMemTransmitDqsTraining, ///< 2A .. + TpProcMemTxDqStartSweep, ///< 2B .. Start write sweep + TpProcMemTxDqSetDelay, ///< 2C .. Set Transmit DQ delay + TpProcMemTxDqWritePattern, ///< 2D .. Write test pattern + TpProcMemTxDqReadPattern, ///< 2E .. Read Test pattern + TpProcMemTxDqTestPattern, ///< 2F .. Compare Test pattern + TpProcMemTxDqResults, ///< 30 .. Update results + TpProcMemTxDqFindWindow, ///< 31 .. Start Find passing window + TpProcMemMaxRdLatencyTraining, ///< 32 .. + TpProcMemMaxRdLatStartSweep, ///< 33 .. Start sweep + TpProcMemMaxRdLatSetDelay, ///< 34 .. Set delay + TpProcMemMaxRdLatWritePattern, ///< 35 .. Write test pattern + TpProcMemMaxRdLatReadPattern, ///< 36 .. Read Test pattern + TpProcMemMaxRdLatTestPattern, ///< 37 .. Compare Test pattern + TpProcMemOnlineSpareInit, ///< 38 .. Online Spare init + TpProcMemBankInterleaveInit, ///< 39 .. Bank Interleave Init + TpProcMemNodeInterleaveInit, ///< 3A .. Node Interleave Init + TpProcMemChannelInterleaveInit, ///< 3B .. Channel Interleave Init + TpProcMemEccInitialization, ///< 3C .. ECC initialization + TpProcMemPlatformSpecificInit, ///< 3D .. Platform Specific Init + TpProcMemBeforeAgesaReadSpd, ///< 3E .. Before callout for "AgesaReadSpd" + TpProcMemAfterAgesaReadSpd, ///< 3F .. After callout for "AgesaReadSpd" + TpProcMemBeforeAgesaHookBeforeDramInit, ///< 40 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeDramInit, ///< 41 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining" + TpProcMemAfterAgesaHookBeforeDQSTraining, ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining" + TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeExitSelfRef, ///< 45 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterMemDataInit, ///< 46 .. After MemDataInit + TpProcMemInitializeMCT, ///< 47 .. Before InitializeMCT + TpProcMemLvDdr3, ///< 48 .. Before LV DDR3 + TpProcMemInitMCT, ///< 49 .. Before InitMCT + TpProcMemOtherTiming, ///< 4A.. Before OtherTiming + TpProcMemUMAMemTyping, ///< 4B .. Before UMAMemTyping + TpProcMemSetDqsEccTmgs, ///< 4C .. Before SetDqsEccTmgs + TpProcMemMemClr, ///< 4D .. Before MemClr + TpProcMemOnDimmThermal, ///< 4E .. Before On DIMM Thermal + TpProcMemDmi, ///< 4F .. Before DMI + TpProcMemEnd, ///< 50 .. End of memory code + + // CPU test points + TpProcCpuEntryDmi, ///< 51 .. Entry point CreateDmiRecords + TpProcCpuEntryPstate, ///< 52 .. Entry point GenerateSsdt + TpProcCpuEntryPstateLeveling, ///< 53 .. Entry point PStateLeveling + TpProcCpuEntryPstateGather, ///< 54 .. Entry point PStateGatherData + TpProcCpuEntryWhea, ///< 55 .. Entry point CreateAcpiWhea + TpProcS3Init, ///< 56 Entry point S3Init + TpProcCpuProcessRegisterTables = 0X58, ///< 58 .. Register table processing + TpProcCpuSetBrandID, ///< 59 .. Set brand ID + TpProcCpuLocalApicInit, ///< 5A .. Initialize local APIC + TpProcCpuLoadUcode, ///< 5B .. Load microcode patch + TpProcCpuBeforePMFeatureInit, ///< 5C .. BeforePM feature dispatch point + TpProcCpuPowerMgmtInit, ///< 5D .. Power Management table processing + TpProcCpuEarlyFeatureInit, ///< 5E .. Early feature dispatch point + TpProcCpuCoreLeveling, ///< 5F .. Core Leveling + TpProcCpuApMtrrSync, ///< 60 .. AP MTRR sync up + TpProcCpuPostFeatureInit, ///< 61 .. POST feature dispatch point + TpProcCpuBeforeRelinquishAPsFeatureInit = 0x63, ///< 63 .. Before Relinquishing control of APs feature dispatch point + TpProcCpuBeforeAllocateWheaBuffer, ///< 64 .. Before the WHEA init code calls out to allocate a buffer + TpProcCpuAfterAllocateWheaBuffer, ///< 65 .. After the WHEA init code calls out to allocate a buffer + TpProcCpuBeforeAllocateSsdtBuffer = 0x6A, ///< 6A .. Before the P-state init code calls out to allocate a buffer + TpProcCpuAfterAllocateSsdtBuffer, ///< 6B .. After the P-state init code calls out to allocate a buffer + TpProcCpuEntryCrat, ///< 6C .. Entry point CreateAcpiCrat + TpProcCpuEntryCdit, ///< 6D .. Entry point CreateAcpiCdit + TpProcCpuEntryScs, ///< 6E .. Entry point InitializeScsFeature + TpProcCpuRunBtc, ///< 6F .. Start of Btc run + TpProcCpuEndBtc, ///< 70 .. End of Btc run + + // Topology test points + TpProcTopologyEntry = 0x71, ///< 71 .. Topology Init begin + TpProcTopologyDone = 0x7C, ///< 7C .. Topology Init complete + + // Extended memory test point + TpProcMemSendMRS2 = 0x80, ///< 80 .. Sending MRS2 + TpProcMemSendMRS3, ///< 81 .. Sedding MRS3 + TpProcMemSendMRS1, ///< 82 .. Sending MRS1 + TpProcMemSendMRS0, ///< 83 .. Sending MRS0 + TpProcMemContinPatternGenRead, ///< 84 .. Continuous Pattern Read + TpProcMemContinPatternGenWrite, ///< 85 .. Continuous Pattern Write + TpProcMem2dRdDqsTraining, ///< 86 .. Mem: 2d RdDqs Training begin + TpProcMemBefore2dTrainExtVrefChange,///< 87 .. Mem: Before optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemAfter2dTrainExtVrefChange, ///< 88 .. Mem: After optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemConfigureDCTForGeneral, ///< 89 .. Configure DCT For General use begin + TpProcMemProcConfigureDCTForTraining, ///< 8A .. Configure DCT For training begin + TpProcMemConfigureDCTNonExplicitSeq,///< 8B .. Configure DCT For Non-Explicit + TpProcMemSynchronizeChannels, ///< 8C .. Configure to Sync channels + TpProcMemC6StorageAllocation, ///< 8D .. Allocate C6 Storage + + // Gnb Earlier init + TpGnbEarlierPcieConfigurationInit = 0x90, ///< 90 .. GNB earlier PCIE configuration init + TpGnbEarlierInterface = 0x91, ///< 91 .. GNB earlier interface + // Gnb Early init + TpGnbEarlyInterface = 0x92, ///< 92 .. GNB early interface + TpGnbPcieConfigurationMap, ///< 93 .. GNB early PCIE configuration map + TpGnbPcieEarlyInterface, ///< 94 .. GNB early PCIE interface + //Gnb post init + TpGnbPciePostEarlyInterface = 0x95, ///< 95 .. GNB post early interface + TpGnbGfxConfigPostInterface, ///< 96 .. GNB post GFX config interface + TpGnbGfxPostInterface, ///< 97 .. GNB post GFX interface + // Gnb post after DRAM init + TpGnbPostInterface = 0x98, ///< 98 .. GNB post after DRAM interface + TpGnbPciePostInterface, ///< 99 .. GNB post after DRAM PCIE interface + // Gnb Env init + TpGnbEnvInterface, ///< 9A .. GNB Env Nb interface + TpGnbPcieEnvInterface, ///< 9B .. GNB Env PCIE interface + TpGnbGfxConfigEnvInterface, ///< 9C .. GNB Env GFX Config interface + TpGnbGfxEnvInterface, ///< 9D .. GNB Env GFX interface + // Gnb Mid init + TpGnbGfxConfigMidInterface = 0x9E, ///< 9E .. GNB Mid GFX config interface + TpGnbGfxMidInterface, ///< 9F .. GNB Mid GFX interface + TpPcieMidInterface, ///< A0 .. GNB Mid PCIE interface + TpGnbMidInterface, ///< A1 .. GNB Mid interface + TpGnbSmuMidInterface, ///< A2 .. GNB Mid SMU feature + TpPciePowerGateFeature, ///< A3 .. GNB Mid pcie power gate feature + TpGnbPcieMaxPayloadInterface, ///< A4 .. GNB Mid pcie max payload interface + TpGnbPcieClkPmInterface, ///< A5 .. GNB Mid pcie clk pm port interface + TpGnbPcieAspmInterface, ///< A6 .. GNB Mid pcie ASPM interface + TpGnbNbIoapicInterface, ///< A7 .. GNB Mid IOAPIC interface + // Gnb Late init + TpGnbPcieAlibFeature = 0xA8, ///< A8 .. GNB Late pcie ALIB feature + TpGnbIommuIvrsTable, ///< A9 .. GNB Late pcie IOMMU + TpGnbBtcRun, ///< AA .. GNB Late run BTC + // Gnb S3 Save + TpGnbGfxInitSview = 0xAE, ///< AD .. GNB S3SAVE GFX sview init + TpGnbAlibDispatchFeature = 0xAE, ///< AE .. GNB ALIB dispatch feature + EndGnbTestPoints = 0xAF, ///< AF End of TP range for GNB + + StartFchTestPoints = 0xB0, ///< B0 Entry used for range testing for @b FCH related TPs + TpFchInitResetDispatching, ///< B1 .. FCH InitReset dispatch point + TpFchGppBeforePortTraining, ///< B2 .. Before FCH GPP port training + TpFchGppGen1PortPolling, ///< B3 .. FCH GPP port polling with GEN1 speed + TpFchGppGen2PortPolling, ///< B4 .. FCH GPP port polling with GEN2 speed + TpFchGppAfterPortTraining, ///< B5 .. After FCH GPP port training + TpFchInitEnvDispatching, ///< B6 .. FCH InitEnv dispatch point + TpFchInitMidDispatching, ///< B7 .. FCH InitMid dispatch point + TpFchInitLateDispatching, ///< B8 .. FCH InitLate dispatch point + TpFchGppHotPlugging, ///< B9 .. FCH GPP hot plug event + TpFchGppHotUnplugging, ///< BA .. AFCH GPP hot unplug event + TpFchInitS3EarlyDispatching, ///< BB .. FCH InitS3Early dispatch point + TpFchInitS3LateDispatching, ///< BC .. FCH InitS3Late dispatch point + EndFchTestPoints, ///< BF End of TP range for FCH + + // Interface test points + TpIfAmdInitResetEntry = 0xC0, ///< C0 .. Entry to AmdInitReset + TpIfAmdInitResetExit, ///< C1 .. Exiting from AmdInitReset + TpIfAmdInitRecoveryEntry, ///< C2 .. Entry to AmdInitRecovery + TpIfAmdInitRecoveryExit, ///< C3 .. Exiting from AmdInitRecovery + TpIfAmdInitEarlyEntry, ///< C4 .. Entry to AmdInitEarly + TpIfAmdInitEarlyExit, ///< C5 .. Exiting from AmdInitEarly + TpIfAmdInitPostEntry, ///< C6 .. Entry to AmdInitPost + TpIfAmdInitPostExit, ///< C7 .. Exiting from AmdInitPost + TpIfAmdInitEnvEntry, ///< C8 .. Entry to AmdInitEnv + TpIfAmdInitEnvExit, ///< C9 .. Exiting from AmdInitEnv + TpIfAmdInitMidEntry, ///< CA .. Entry to AmdInitMid + TpIfAmdInitMidExit, ///< CB .. Exiting from AmdInitMid + TpIfAmdInitLateEntry, ///< CC .. Entry to AmdInitLate + TpIfAmdInitLateExit, ///< CD .. Exiting from AmdInitLate + TpIfAmdInitRtbEntry, ///< CE .. Entry to AmdInitRtb + TpIfAmdInitRtbExit, ///< CF .. Exiting from AmdInitRtb + TpIfAmdInitResumeEntry, ///< D0 .. Entry to AmdInitResume + TpIfAmdInitResumeExit, ///< D1 .. Exiting from AmdInitResume + TpIfAmdS3LateRestoreEntry, ///< D2 .. Entry to AmdS3LateRestore + TpIfAmdS3LateRestoreExit, ///< D3 .. Exiting from AmdS3LateRestore + TpIfAmdLateRunApTaskEntry, ///< D4 .. Entry to AmdS3LateRestore + TpIfAmdLateRunApTaskExit, ///< D5 .. Exiting from AmdS3LateRestore + TpIfAmdReadEventLogEntry, ///< D6 .. Entry to AmdReadEventLog + TpIfAmdReadEventLogExit, ///< D7 .. Exiting from AmdReadEventLog + TpIfAmdGetApicIdEntry, ///< D8 .. Entry to AmdGetApicId + TpIfAmdGetApicIdExit, ///< D9 .. Exiting from AmdGetApicId + TpIfAmdGetPciAddressEntry, ///< DA .. Entry to AmdGetPciAddress + TpIfAmdGetPciAddressExit, ///< DB .. Exiting from AmdGetPciAddress + TpIfAmdIdentifyCoreEntry, ///< DC .. Entry to AmdIdentifyCore + TpIfAmdIdentifyCoreExit, ///< DD .. Exiting from AmdIdentifyCore + TpIfBeforeRunApFromIds, ///< DE .. After IDS calls out to run code on an AP + TpIfAfterRunApFromIds, ///< DF .. After IDS calls out to run code on an AP + TpIfBeforeGetIdsData, ///< E0 .. Before IDS calls out to get IDS data + TpIfAfterGetIdsData, ///< E1 .. After IDS calls out to get IDS data + TpIfBeforeAllocateHeapBuffer, ///< E2 .. Before the heap manager calls out to allocate a buffer + TpIfAfterAllocateHeapBuffer, ///< E3 .. After the heap manager calls out to allocate a buffer + TpIfBeforeDeallocateHeapBuffer, ///< E4 .. Before the heap manager calls out to deallocate a buffer + TpIfAfterDeallocateHeapBuffer, ///< E5 .. After the heap manager calls out to deallocate a buffer + TpIfBeforeLocateHeapBuffer, ///< E6 .. Before the heap manager calls out to locate a buffer + TpIfAfterLocateHeapBuffer, ///< E7 .. After the heap manager calls out to locate a buffer + TpIfBeforeRunApFromAllAps, ///< E8 .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllAps, ///< E9 .. After the BSP calls out to run code on an AP + TpIfBeforeRunApFromAllCore0s, ///< EA .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllCore0s, ///< EB .. After the BSP calls out to run code on an AP + TpIfBeforeAllocateS3SaveBuffer, ///< EC .. Before the S3 save code calls out to allocate a buffer + TpIfAfterAllocateS3SaveBuffer, ///< ED .. After the S3 save code calls out to allocate a buffer + TpIfBeforeAllocateMemoryS3SaveBuffer, ///< EE .. Before the memory S3 save code calls out to allocate a buffer + TpIfAfterAllocateMemoryS3SaveBuffer, ///< EF .. After the memory S3 save code calls out to allocate a buffer + TpIfBeforeLocateS3PciBuffer, ///< F0 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3PciBuffer, ///< F1 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CPciBuffer, ///< F2 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CPciBuffer, ///< F3 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3MsrBuffer, ///< F4 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3MsrBuffer, ///< F5 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CMsrBuffer, ///< F6 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CMsrBuffer, ///< F7 .. After the memory code calls out to locate a buffer + TpReadyToBoot, ///< F8 .. Ready to boot event + // PMU test points + TpProcMemPmuFailed, ///< F9 .. Failed PMU training. + TpIfAmdS3FinalRestoreEntry, ///< FA .. Entry to AmdS3FinalRestore + TpIfAmdS3FinalRestoreExit, ///< FB .. Exiting from AmdS3FinalRestore + + EndAgesaTps = 0xFF, ///< Last defined AGESA TP +} AGESA_TP; + +///Ids Feat description +typedef enum { + IDS_FEAT_UCODE_UPDATE = 0x0000, ///< Feat for Ucode Update + IDS_FEAT_TARGET_PSTATE, ///< Feat for Target Pstate + IDS_FEAT_POSTPSTATE, ///< Feat for Post Pstate + IDS_FEAT_ECC_CTRL, ///< Feat for Ecc Control + IDS_FEAT_ECC_SYMBOL_SIZE, ///< Feat for Ecc symbol size + IDS_FEAT_DCT_ALLMEMCLK, ///< Feat for all memory clock + IDS_FEAT_DCT_ALLCKE, ///< Feat for all CKE + IDS_FEAT_DCT_ALLCS, ///< Feat for all CS + IDS_FEAT_DCT_GANGMODE, ///< Feat for Dct gang mode + IDS_FEAT_DCT_BURSTLENGTH, ///< Feat for dct burst length + IDS_FEAT_DCT_POWERDOWN, ///< Feat for dct power down + IDS_FEAT_DCT_DLLSHUTDOWN, ///< Feat for dct dll shut down + IDS_FEAT_HDTOUT, ///< Feat for hdt out + IDS_FEAT_GNB_PLATFORMCFG, ///< Feat for override GNB platform config + IDS_FEAT_CPB_CTRL, ///< Feat for Config the Core peformance boost feature + IDS_FEAT_HTC_CTRL, ///< Feat for Hardware Thermal Control + IDS_FEAT_MEMORY_MAPPING, ///< Feat for Memory Mapping + IDS_FEAT_NV_TO_CMOS, ///< Feat for Save BSP Nv to CMOS + IDS_FEAT_COMMON, ///< Common Feat + IDS_FEAT_END = 0xFF ///< End of Common feat +} IDS_FEAT; + +///Ids IDT table function ID +typedef enum { + IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000, ///< Function ID for saving IDTR for BSC + IDS_IDT_RESTORE_IDTR_FOR_BSC, ///< Function ID for restoring IDTR for BSC + IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, ///< Function ID for updating exception vector +} IDS_IDT_FUNC_ID; + +typedef IDS_STATUS IDS_COMMON_FUNC ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC; + +/// Data Structure of IDS Feature block +typedef struct _IDS_FAMILY_FEAT_STRUCT { + IDS_FEAT IdsFeat; ///< Ids Feat ID + BOOLEAN IsBsp; ///< swith for Bsp check + AGESA_IDS_OPTION IdsOption; ///< IDS option + UINT64 CpuFamily; ///< + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_FAMILY_FEAT_STRUCT; + + +/// Data Structure of IDS option +typedef struct _IDS_OPTION_STRUCT { + AGESA_IDS_OPTION idsoption; ///< IDS option + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_OPTION_STRUCT; + +/// Data Structure of IDS option table +typedef struct _IDS_OPTION_STRUCT_TBL { + UINT8 version; ///<Version of IDS option table + UINT16 size; ///<Size of IDS option table + CONST IDS_OPTION_STRUCT *pIdsOptionStruct; ///<pointer to array of structure +} IDS_OPTION_STRUCT_TBL; + +#define IDS_NV_TO_CMOS_LEN_BYTE 1 +#define IDS_NV_TO_CMOS_LEN_WORD 2 +#define IDS_NV_TO_CMOS_LEN_END 0xFF +#define IDS_NV_TO_CMOS_ID_END 0xFFFF + +/// Data struct of set/get NV to/from CMOS +typedef struct _IDS_NV_TO_CMOS { + UINT8 Length; ///< Length of NV + UINT16 IDS_NV_ID; ///< IDS id +} IDS_NV_TO_CMOS; + +IDS_STATUS +AmdIdsCtrlDispatcher ( + IN AGESA_IDS_OPTION IdsOption, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsOptionCallout ( + IN UINTN CallOutId, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutInit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3Exit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3ApExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsDebugPrint ( + IN UINT64 Flag, + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintTopology ( + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintCpu ( + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintMem ( + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintGnb ( + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintAll ( + IN CONST CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsHdtOutBufferFlush ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsMemTimeOut ( + IN OUT VOID *DataPtr + ); + +VOID +IdsAgesaTestPoint ( + IN AGESA_TP TestPoint, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * IDS Backend Function for ASSERT + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + * @retval TRUE No error +**/ +BOOLEAN +IdsAssert ( + IN UINT32 FileCode + ); + +/** + * The engine code for ASSERT MACRO + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + */ +BOOLEAN +IdsErrorStop ( + IN UINT32 FileCode + ); + +VOID +IdsDelay ( + VOID +); + +BOOLEAN +AmdHeapIntactCheck ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsCarCorruptionCheck ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +IdsExceptionTrap ( + IN IDS_IDT_FUNC_ID IdsIdtFuncId, + IN VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfTimestamp ( + IN UINT32 LineInFile, + IN UINT32 Description, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfAnalyseTimestamp ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IEM_SKIP_CODE + #undef IEM_INSERT_CODE +#endif +#ifndef IEM_SKIP_CODE + #define IEM_SKIP_CODE(L) +#endif +#ifndef IEM_INSERT_CODE + #define IEM_INSERT_CODE(L, Fn, Parm) +#endif + +#endif // _IDS_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/IdsPerf.h b/src/vendorcode/amd/pi/00660F01/Include/IdsPerf.h new file mode 100644 index 0000000000..0ec8a492f0 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/IdsPerf.h @@ -0,0 +1,145 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Routines for performance analysis + * + * Contains AMD AGESA debug macros and functions for performance analysis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _IDS_PERFORMANCE_DATA_POINT + + #define _IDS_PERFORMANCE_DATA_POINT + #define IDS_PERF_VERSION 0x00010001ul //version number 0.1.0.1 +/// Time points performance function used +/// N O T E: NEVER change below defination, any new TP MUST be appended to the end of this enum + typedef enum { + TP_BEGINPROCAMDINITEARLY = 0x100, ///< BeginProcAmdInitEarly + TP_ENDPROCAMDINITEARLY = 0x101, ///< EndProcAmdInitEarly + TP_BEGINAMDTOPOINITIALIZE = 0x102, ///< BeginAmdTopoInitialize + TP_ENDAMDTOPOINITIALIZE = 0x103, ///< EndAmdTopoInitialize + TP_BEGINGNBINITATEARLIER = 0x104, ///< BeginGnbInitAtEarlier + TP_ENDGNBINITATEARLIER = 0x105, ///< EndGnbInitAtEarlier + TP_BEGINAMDCPUEARLY = 0x106, ///< BeginAmdCpuEarly + TP_ENDAMDCPUEARLY = 0x107, ///< EndAmdCpuEarly + TP_BEGINGNBINITATEARLY = 0x108, ///< BeginGnbInitAtEarly + TP_ENDGNBINITATEARLY = 0x109, ///< EndGnbInitAtEarly + TP_BEGINPROCAMDINITENV = 0x10A, ///< BeginProcAmdInitEnv + TP_ENDPROCAMDINITENV = 0x10B, ///< EndProcAmdInitEnv + TP_BEGININITENV = 0x10C, ///< BeginInitEnv + TP_ENDINITENV = 0x10D, ///< EndInitEnv + TP_BEGINGNBINITATENV = 0x10E, ///< BeginGnbInitAtEnv + TP_ENDGNBINITATENV = 0x10F, ///< EndGnbInitAtEnv + TP_BEGINPROCAMDINITLATE = 0x110, ///< BeginProcAmdInitLate + TP_ENDPROCAMDINITLATE = 0x111, ///< EndProcAmdInitLate + TP_BEGINCREATSYSTEMTABLE = 0x112, ///< BeginCreatSystemTable + TP_ENDCREATSYSTEMTABLE = 0x113, ///< EndCreatSystemTable + TP_BEGINDISPATCHCPUFEATURESLATE = 0x114, ///< BeginDispatchCpuFeaturesLate + TP_ENDDISPATCHCPUFEATURESLATE = 0x115, ///< EndDispatchCpuFeaturesLate + TP_BEGINAMDCPULATE = 0x116, ///< BeginAmdCpuLate + TP_ENDAMDCPULATE = 0x117, ///< EndAmdCpuLate + TP_BEGINGNBINITATLATE = 0x118, ///< BeginGnbInitAtLate + TP_ENDGNBINITATLATE = 0x119, ///< EndGnbInitAtLate + TP_BEGINPROCAMDINITMID = 0x11A, ///< BeginProcAmdInitMid + TP_ENDPROCAMDINITMID = 0x11B, ///< EndProcAmdInitMid + TP_BEGININITMID = 0x11E, ///< BeginInitMid + TP_ENDINITMID = 0x11F, ///< EndInitMid + TP_BEGINGNBINITATMID = 0x120, ///< BeginGnbInitAtMid + TP_ENDGNBINITATMID = 0x121, ///< EndGnbInitAtMid + TP_BEGINPROCAMDINITPOST = 0x122, ///< BeginProcAmdInitPost + TP_ENDPROCAMDINITPOST = 0x123, ///< EndProcAmdInitPost + TP_BEGINGNBINITATPOST = 0x124, ///< BeginGnbInitAtPost + TP_ENDGNBINITATPOST = 0x125, ///< EndGnbInitAtPost + TP_BEGINAMDMEMAUTO = 0x126, ///< BeginAmdMemAuto + TP_ENDAMDMEMAUTO = 0x127, ///< EndAmdMemAuto + TP_BEGINAMDCPUPOST = 0x128, ///< BeginAmdCpuPost + TP_ENDAMDCPUPOST = 0x129, ///< EndAmdCpuPost + TP_BEGINGNBINITATPOSTAFTERDRAM = 0x12A, ///< BeginGnbInitAtPostAfterDram + TP_ENDGNBINITATPOSTAFTERDRAM = 0x12B, ///< EndGnbInitAtPostAfterDram + TP_BEGINPROCAMDINITRESET = 0x12C, ///< BeginProcAmdInitReset + TP_ENDPROCAMDINITRESET = 0x12D, ///< EndProcAmdInitReset + TP_BEGININITRESET = 0x12E, ///< BeginInitReset + TP_ENDINITRESET = 0x12F, ///< EndInitReset + TP_BEGINHTINITRESET = 0x130, ///< BeginHtInitReset + TP_ENDHTINITRESET = 0x131, ///< EndHtInitReset + TP_BEGINPROCAMDINITRESUME = 0x132, ///< BeginProcAmdInitResume + TP_ENDPROCAMDINITRESUME = 0x133, ///< EndProcAmdInitResume + TP_BEGINAMDMEMS3RESUME = 0x134, ///< BeginAmdMemS3Resume + TP_ENDAMDMEMS3RESUME = 0x135, ///< EndAmdMemS3Resume + TP_BEGINDISPATCHCPUFEATURESS3RESUME = 0x136, ///< BeginDispatchCpuFeaturesS3Resume + TP_ENDDISPATCHCPUFEATURESS3RESUME = 0x137, ///< EndDispatchCpuFeaturesS3Resume + TP_BEGINSETCORESTSCFREQSEL = 0x138, ///< BeginSetCoresTscFreqSel + TP_ENDSETCORESTSCFREQSEL = 0x139, ///< EndSetCoresTscFreqSel + TP_BEGINMEMFMCTMEMCLR_INIT = 0x13A, ///< BeginMemFMctMemClr_Init + TP_ENDNMEMFMCTMEMCLR_INIT = 0x13B, ///< EndnMemFMctMemClr_Init + TP_BEGINMEMBEFOREMEMDATAINIT = 0x13C, ///< BeginMemBeforeMemDataInit + TP_ENDMEMBEFOREMEMDATAINIT = 0x13D, ///< EndMemBeforeMemDataInit + TP_BEGINPROCAMDMEMAUTO = 0x13E, ///< BeginProcAmdMemAuto + TP_ENDPROCAMDMEMAUTO = 0x13F, ///< EndProcAmdMemAuto + TP_BEGINMEMMFLOWC32 = 0x140, ///< BeginMemMFlowC32 + TP_ENDMEMMFLOWC32 = 0x141, ///< EndMemMFlowC32 + TP_BEGINMEMINITIALIZEMCT = 0x142, ///< BeginMemInitializeMCT + TP_ENDMEMINITIALIZEMCT = 0x143, ///< EndMemInitializeMCT + TP_BEGINMEMSYSTEMMEMORYMAPPING = 0x144, ///< BeginMemSystemMemoryMapping + TP_ENDMEMSYSTEMMEMORYMAPPING = 0x145, ///< EndMemSystemMemoryMapping + TP_BEGINMEMDRAMTRAINING = 0x146, ///< BeginMemDramTraining + TP_ENDMEMDRAMTRAINING = 0x147, ///< EndMemDramTraining + TP_BEGINMEMOTHERTIMING = 0x148, ///< BeginMemOtherTiming + TP_ENDMEMOTHERTIMING = 0x149, ///< EndMemOtherTiming + TP_BEGINMEMUMAMEMTYPING = 0x14A, ///< BeginMemUMAMemTyping + TP_ENDMEMUMAMEMTYPING = 0x14B, ///< EndMemUMAMemTyping + TP_BEGINMEMMEMCLR = 0x14C, ///< BeginMemMemClr + TP_ENDMEMMEMCLR = 0x14D, ///< EndMemMemClr + TP_BEGINMEMMFLOWTN = 0x14E, ///< BeginMemMFlowTN + TP_ENDMEMMFLOWTN = 0x14F, ///< EndMemMFlowTN + TP_BEGINAGESAHOOKBEFOREDRAMINIT = 0x150, ///< BeginAgesaHookBeforeDramInit + TP_ENDAGESAHOOKBEFOREDRAMINIT = 0x151, ///< EndAgesaHookBeforeDramInit + TP_BEGINPROCMEMDRAMTRAINING = 0x152, ///< BeginProcMemDramTraining + TP_ENDPROCMEMDRAMTRAINING = 0x153, ///< EndProcMemDramTraining + TP_BEGINGNBINITATRTB = 0x154, ///< BeginGnbInitAtRtb + TP_ENDGNBINITATRTB = 0x155, ///< EndGnbInitAtRtb + TP_BEGINGNBLOADSCSDATA = 0x156, ///< BeginGnbLoadScsData + TP_ENDGNBLOADSCSDATA = 0x157, ///< EndGnbLoadScsData + TP_BEGINGNBPCIETRAINING = 0x158, ///< BeginGnbPcieTraining + TP_ENDGNBPCIETRAINING = 0x159, ///< EndGnbPcieTraining + TP_BEGINDISPATCHCPUFEATURESINITRTB = 0x15A, ///< BeginDispatchCpuFeaturesInitRtb + TP_ENDDISPATCHCPUFEATURESINITRTB = 0x15B, ///< EndDispatchCpuFeaturesInitRtb + TP_BEGINAMDCPUMID = 0x15C, ///< BeginAmdCpuEarly + TP_ENDAMDCPUMID = 0x15D, ///< EndAmdCpuEarly + TP_BEGINAMDGNBMIDLATE = 0x15E, ///< BeginAmdGnbMidLate + TP_ENDAMDAMDGNBMIDLATE = 0x15F, ///< EndAmdGnbMidLate + IDS_TP_END ///< End of IDS TP list + } IDS_PERF_DATA; +#endif diff --git a/src/vendorcode/amd/pi/00660F01/Include/Options.h b/src/vendorcode/amd/pi/00660F01/Include/Options.h new file mode 100644 index 0000000000..70c39f89e3 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/Options.h @@ -0,0 +1,68 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AGESA options structures + * + * Contains options control structures for the AGESA build options + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _OPTIONS_H_ +#define _OPTIONS_H_ + +/** + * Provide topology limits for loops and runtime, based on supported families. + */ +typedef struct { + UINT32 PlatformNumberOfSockets; ///< The limit to the number of processors based on + ///< supported families and other build options. + UINT32 PlatformNumberOfModules; ///< The limit to the number of modules in a processor, based + ///< on supported families. +} OPTIONS_CONFIG_TOPOLOGY; + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; ///< The function id specified. + IMAGE_ENTRY EntryPoint; ///< The corresponding entry point to call. +} DISPATCH_TABLE; + + +#endif // _OPTIONS_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/pi/00660F01/Include/PlatformMemoryConfiguration.h new file mode 100644 index 0000000000..38f7f051f4 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/PlatformMemoryConfiguration.h @@ -0,0 +1,530 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Platform Specific Memory Configuration + * + * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: OPTION + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_ +#define _PLATFORM_MEMORY_CONFIGURATION_H_ + +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ +#ifndef PSO_ENTRY + #define PSO_ENTRY UINT8 +#endif + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * PLATFORM SPECIFIC MEMORY DEFINITIONS + *---------------------------------------------------------------------------------------- + */ +/// +/// Memory Speed and DIMM Population Masks +/// +///< DDR Speed Masks +///< Specifies the DDR Speed on a memory channel +/// +#define ANY_SPEED 0xFFFFFFFFul +#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66)) +#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66)) +#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66)) +#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66)) +#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66)) +#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66)) +#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66)) +#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66)) +#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66)) +#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66)) +/// +///< DIMM POPULATION MASKS +///< Specifies the DIMM Population on a channel (can be added together to specify configuration). +///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1 +///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1 +/// +#define ANY_ 0xFF ///< Any dimm configuration the current channel +#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel +#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel +#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel +#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel +#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel +#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel +#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel +#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel +#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel +#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel +#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel +#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel +#define LR_DIMM0 0x0001 ///< Lrdimm in slot 0 on the current channel +#define LR_DIMM1 0x0010 ///< Lrdimm in slot 1 on the current channel +#define LR_DIMM2 0x0100 ///< Lrdimm in slot 2 on the current channel +#define LR_DIMM3 0x1000 ///< Lrdimm in slot 3 on the current channel +#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel +#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel +#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel +#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel +/// +///< CS POPULATION MASKS +///< Specifies the CS Population on a channel (can be added together to specify configuration). +///< ex. CS0 + CS1 : CS0 and CS1 apply to the setting +/// +#define CS_ANY_ 0xFF ///< Any CS configuration +#define CS0_ 0x01 ///< CS0 bit map mask +#define CS1_ 0x02 ///< CS1 bit map mask +#define CS2_ 0x04 ///< CS2 bit map mask +#define CS3_ 0x08 ///< CS3 bit map mask +#define CS4_ 0x10 ///< CS4 bit map mask +#define CS5_ 0x20 ///< CS5 bit map mask +#define CS6_ 0x40 ///< CS6 bit map mask +#define CS7_ 0x80 ///< CS7 bit map mask +/// +///< Number of Dimms on the current channel +///< This is a mask used to indicate the number of dimms in a channel +///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms) +/// +#define ANY_NUM 0xFF ///< Any number of Dimms +#define NO_DIMM 0x00 ///< No Dimms present +#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel +#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel +#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel +#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel + +/// +///< DIMM VOLTAGE MASKS +/// +#define VOLT_ANY_ 0xFF ///< Any voltage configuration +#define VOLT1_5_ 0x01 ///< Voltage 1.5V bit map mask +#define VOLT1_35_ 0x02 ///< Voltage 1.35V bit map mask +#define VOLT1_25_ 0x04 ///< Voltage 1.25V bit map mask + +// +// < Not applicable +// +#define NA_ 0 ///< Not applicable + +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Override Definitions for Socket, Channel and Dimm + * This indicates where a platform override will be applied. + * + *---------------------------------------------------------------------------------------- + */ +/// +///< SOCKET MASKS +///< Indicates associated processor sockets to apply override settings +/// +#define ANY_SOCKET 0xFF ///< Apply to all sockets +#define SOCKET0 0x01 ///< Apply to socket 0 +#define SOCKET1 0x02 ///< Apply to socket 1 +#define SOCKET2 0x04 ///< Apply to socket 2 +#define SOCKET3 0x08 ///< Apply to socket 3 +#define SOCKET4 0x10 ///< Apply to socket 4 +#define SOCKET5 0x20 ///< Apply to socket 5 +#define SOCKET6 0x40 ///< Apply to socket 6 +#define SOCKET7 0x80 ///< Apply to socket 7 +/// +///< CHANNEL MASKS +///< Indicates Memory channels where override should be applied +/// +#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels +#define CHANNEL_A 0x01 ///< Apply to Channel A +#define CHANNEL_B 0x02 ///< Apply to Channel B +#define CHANNEL_C 0x04 ///< Apply to Channel C +#define CHANNEL_D 0x08 ///< Apply to Channel D +/// +/// DIMM MASKS +/// Indicates Dimm Slots where override should be applied +/// +#define ALL_DIMMS 0xFF ///< Apply to all dimm slots +#define DIMM0 0x01 ///< Apply to Dimm Slot 0 +#define DIMM1 0x02 ///< Apply to Dimm Slot 1 +#define DIMM2 0x04 ///< Apply to Dimm Slot 2 +#define DIMM3 0x08 ///< Apply to Dimm Slot 3 +/// +/// REGISTER ACCESS MASKS +/// Not supported as an at this time +/// +#define ACCESS_NB0 0x0 +#define ACCESS_NB1 0x1 +#define ACCESS_NB2 0x2 +#define ACCESS_NB3 0x3 +#define ACCESS_NB4 0x4 +#define ACCESS_PHY 0x5 +#define ACCESS_DCT_XT 0x6 +/// +/// MOTHER BOARD DESIGN LAYERS MASKS +/// Indicates the layer design of mother board +/// +#define LAYERS_4 0x0 +#define LAYERS_6 0x1 +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Overriding Table Definitions + * + *---------------------------------------------------------------------------------------- + */ + +#define PSO_END 0 ///< Table End +#define PSO_CKE_TRI 1 ///< CKE Tristate Map +#define PSO_ODT_TRI 2 ///< ODT Tristate Map +#define PSO_CS_TRI 3 ///< CS Tristate Map +#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel +#define PSO_CLK_SPEED 5 ///< Clock Speed +#define PSO_DIMM_TYPE 6 ///< Dimm Type +#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map +#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket +#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed +#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel +#define PSO_MEM_TECH 11 ///< Channel Memory Type +#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay +#define PSO_RXEN_SEED 13 ///< Hardwared based RxEn seed +#define PSO_NO_LRDIMM_CS67_ROUTING 14 ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs +#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15 ///< Soldered down SODIMM type +#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V +#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17 ///< Min RD/WR dataeye width +#define PSO_CPU_FAMILY_TO_OVERRIDE 18 ///< CPU family signature to tell following PSO macros are CPU family dependent +#define PSO_MAX_SOLDERED_DOWN_DIMMS 19 ///< Max Soldered-down Dimms per channel +#define PSO_MOTHER_BOARD_LAYERS 20 ///< Mother board layer design + +/*---------------------------------- + * CONDITIONAL PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition Types +#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types +#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block +#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected +#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel +#define PSO_CONDITION_REG 103 // Reserved +#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types +// Action Types +#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types +#define PSO_ACTION_ODT 120 ///< ODT values to override +#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override +#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override +#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override +#define PSO_ACTION_REG 124 // Reserved +#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration +#define PSO_ACTION_MAX 125 ///< End of Action Entry Types +#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types + +/*---------------------------------- + * TABLE DRIVEN PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition descriptor +#define PSO_TBLDRV_CONFIG 200 ///< Configuration Descriptor + +// Overriding entry types +#define PSO_TBLDRV_START 210 ///< Start of Table Driven Overriding Entry Types +#define PSO_TBLDRV_SPEEDLIMIT 210 ///< Speed Limit +#define PSO_TBLDRV_ODT_RTTNOM 211 ///< RttNom +#define PSO_TBLDRV_ODT_RTTWR 212 ///< RttWr +#define PSO_TBLDRV_ODTPATTERN 213 ///< Odt Patterns +#define PSO_TBLDRV_ADDRTMG 214 ///< Address/Timing values +#define PSO_TBLDRV_ODCCTRL 215 ///< ODC Control values +#define PSO_TBLDRV_SLOWACCMODE 216 ///< Slow Access Mode +#define PSO_TBLDRV_MR0_CL 217 ///< MR0[CL] +#define PSO_TBLDRV_MR0_WR 218 ///< MR0[WR] +#define PSO_TBLDRV_RC2_IBT 219 ///< RC2[IBT] +#define PSO_TBLDRV_RC10_OPSPEED 220 ///< RC10[Opearting Speed] +#define PSO_TBLDRV_LRDIMM_IBT 221 ///< LrDIMM IBT +#define PSO_TBLDRV_2D_TRAINING 222 ///< 2D training +#define PSO_TBLDRV_INVALID_TYPE 223 ///< Invalid Type +#define PSO_TBLDRV_END 223 ///< End of Table Driven Overriding Entry Types + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \ + PSO_CPU_FAMILY_TO_OVERRIDE, 4, \ + ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF) + +#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \ + , Bit7Map + +#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_CKE_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map + +#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \ + PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel + +#define NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfSolderedDownDimmsPerChannel) \ + PSO_MAX_SOLDERED_DOWN_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfSolderedDownDimmsPerChannel + +#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \ + PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel + +#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \ + PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket + +#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \ + PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \ + BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24) + +#define DRAM_TECHNOLOGY(SocketID, MemTechType) \ + PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24) + +#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed + +#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \ + Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \ + Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8) + +#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \ + PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \ + PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \ + PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE + +#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \ + PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth + +#define MOTHER_BOARD_LAYERS(Layers) \ + PSO_MOTHER_BOARD_LAYERS, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, Layers + +#define MAX_NUMBER_PSO_TABLES 13 +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CONDITION_AND \ + PSO_CONDITION_AND, 0 + +#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \ + PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk + +#define COND_SPD(Byte, Mask, Value) \ + PSO_CONDITION_SPD, 3, Byte, Mask, Value + +#define COND_REG(Access, Offset, Mask, Value) \ + PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \ + ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \ + ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF) + +#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \ + PSO_ACTION_ODT, 9, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \ + Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt + +#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \ + PSO_ACTION_ADDRTMG, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF) + +#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \ + PSO_ACTION_ODCCONTROL, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF) + +#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \ + PSO_ACTION_SLEWRATE, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF) + +#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \ + PSO_ACTION_SPEEDLIMIT, 9, \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \ + (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \ + (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \ + (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF) + + +#define MEMCLK_DIS_MAP_SIZE 13 +#define CKE_TRI_MAP_SIZE 9 +#define ODT_TRI_MAP_SIZE 9 +#define CS_TRI_MAP_SIZE 13 +#define NUMBER_OF_DIMMS_SUPPORTED_SIZE 6 +#define NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED_SIZE 6 +#define NUMBER_OF_CHIP_SELECTS_SUPPORTED_SIZE 6 +#define NUMBER_OF_CHANNELS_SUPPORTED_SIZE 6 +#define OVERRIDE_DDR_BUS_SPEED_SIZE 13 +#define DRAM_TECHNOLOGY_SIZE 9 +#define SOLDERED_DOWN_SODIMM_TYPE_SIZE 6 +#define MEMORY_POWER_POLICY_OVERRIDE_SIZE 6 +#define MOTHER_BOARD_LAYERS_SIZE 6 + + + +/*---------------------------------------------------------------------------------------- + * END OF CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ +/// Configuration sub-descriptors +typedef enum { + CONFIG_GENERAL, ///< CONFIG_GENERAL + CONFIG_SPEEDLIMIT, ///< CONFIG_SPEEDLIMIT + CONFIG_RC2IBT, ///< CONFIG_RC2IBT + CONFIG_DONT_CARE, ///< CONFIG_DONT_CARE +} Config_Type; + +// ==================== +// Configuration Macros +// ==================== +#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \ + PSO_TBLDRV_CONFIG, 9, \ + CONFIG_GENERAL, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF) + +#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \ + PSO_TBLDRV_CONFIG, 7, \ + CONFIG_SPEEDLIMIT, \ + DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm + +#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \ + PSO_TBLDRV_CONFIG, 10, \ + CONFIG_RC2IBT, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + NumOfReg + +//================== +// Overriding Macros +//================== +#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \ + PSO_TBLDRV_SPEEDLIMIT, 6, \ + (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \ + (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \ + (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \ + PSO_TBLDRV_ODT_RTTNOM, 2, \ + TgtCS, RttNom + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \ + PSO_TBLDRV_ODT_RTTWR, 2, \ + TgtCS, RttWr + +#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \ + PSO_TBLDRV_ODTPATTERN, 16, \ + ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \ + ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \ + ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \ + ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \ + PSO_TBLDRV_ADDRTMG, 4, \ + ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \ + PSO_TBLDRV_ODCCTRL, 4, \ + ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \ + PSO_TBLDRV_SLOWACCMODE, 1, \ + SlowAccMode + +#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \ + PSO_TBLDRV_RC2_IBT, 2, \ + TgtDimm, IBT + +#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_CL, 3, \ + RegValOfTcl, MR0CL13, MR0CL0 + +#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_WR, 2, \ + RegValOfTwr, MR0WR + +#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_RC10_OPSPEED, 5, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + MR10OPSPEED + +#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \ + PSO_TBLDRV_LRDIMM_IBT, 4, \ + F0RC8, F1RC0, F1RC1, F1RC2 + +#define TBLDRV_CONFIG_ENTRY_2D_TRAINING(Training2dMode) \ + PSO_TBLDRV_2D_TRAINING, 1, \ + Training2dMode + +//============================ +// Macros for removing entries +//============================ +#define INVALID_CONFIG_FLAG 0x8000 + +#define TBLDRV_INVALID_CONFIG \ + PSO_TBLDRV_INVALID_TYPE, 0 + +/*---------------------------------------------------------------------------------------- + * END OF TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ + +#endif // _PLATFORM_MEMORY_CONFIGURATION_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Include/Topology.h b/src/vendorcode/amd/pi/00660F01/Include/Topology.h new file mode 100644 index 0000000000..099142eb82 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Include/Topology.h @@ -0,0 +1,86 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Topology interface definitions. + * + * Contains AMD AGESA internal interface for topology related data which + * is consumed by code other than Topology Services init. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _TOPOLOGY_H_ +#define _TOPOLOGY_H_ + +// Defines for limiting data structure maximum allocation and limit checking. +#define MAX_NODES 1 +#define MAX_SOCKETS MAX_NODES +#define MAX_DIES 1 + +/** + * Socket and Module to Node Map Item. + * Provide the Node Id and core id range for each module in each processor. + */ +typedef struct { + UINT8 Node; ///< The module's Node id. + UINT8 LowCore; ///< The lowest processor core id for this module. + UINT8 HighCore; ///< The highest processor core id for this module. + UINT8 EnabledComputeUnits; ///< The value of Enabled for this processor module. + UINT8 DualCoreComputeUnits; ///< The value of DualCore for this processor module. + UINT8 TripleCoreComputeUnits;///< The value of TripleCore for this processor module. + UINT8 QuadCoreComputeUnits; ///< The value of QuadCore for this processor module. +} SOCKET_DIE_TO_NODE_ITEM; + +/** + * Socket and Module to Node Map. + * This type is a pointer to the actual map, it can be used for a struct item or + * for typecasting a heap buffer pointer. + */ +typedef SOCKET_DIE_TO_NODE_ITEM (*SOCKET_DIE_TO_NODE_MAP)[MAX_SOCKETS][MAX_DIES]; + +/** + * Node id to Socket Die Map Item. + */ +typedef struct { + UINT8 Socket; ///< socket of the processor containing the Node. + UINT8 Die; ///< the module in the processor which is Node. +} NODE_TO_SOCKET_DIE_ITEM; + +/** + * Node id to Socket Die Map. + */ +typedef NODE_TO_SOCKET_DIE_ITEM (*NODE_TO_SOCKET_DIE_MAP)[MAX_NODES]; + +#endif // _TOPOLOGY_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Porting.h b/src/vendorcode/amd/pi/00660F01/Porting.h new file mode 100644 index 0000000000..f23f309d07 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Porting.h @@ -0,0 +1,286 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Describes compiler dependencies - to support several compile time environments + * + * Contains compiler environment porting descriptions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Includes + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ +/***************************************************************************** + * + * Copyright 2008 - 2015 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PORTING_H_ +#define _PORTING_H_ + +#if defined (_MSC_VER) + #include <intrin.h> + void _disable (void); + void _enable (void); + #pragma warning(disable: 4103 4001 4733) + #pragma intrinsic (_disable, _enable) + #pragma warning(push) + // ----------------------------------------------------------------------- + // Define a code_seg MACRO + // + #define MAKE_AS_A_STRING(arg) #arg + + #define CODE_GROUP(arg) __pragma (code_seg (MAKE_AS_A_STRING (.t##arg))) + + #define RDATA_GROUP(arg) __pragma (const_seg (MAKE_AS_A_STRING (.d##arg))) + #define FUNC_ATTRIBUTE(arg) __declspec(arg) + //#include <intrin.h> // MS has built-in functions + + #if _MSC_VER < 900 + // ----------------------------------------------------------------------- + // Assume MSVC 1.52C (16-bit) + // + // NOTE: When using MSVC 1.52C use the following command line: + // + // CL.EXE /G3 /AL /O1i /Fa <FILENAME.C> + // + // This will produce 32-bit code in USE16 segment that is optimized for code + // size. + typedef void VOID; + + // Create the universal 32, 16, and 8-bit data types + typedef unsigned long UINTN; + typedef long INT32; + typedef unsigned long UINT32; + typedef int INT16; + typedef unsigned int UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + /// struct for 16-bit environment handling of 64-bit value + typedef struct _UINT64 { + IN OUT UINT32 lo; ///< lower 32-bits of 64-bit value + IN OUT UINT32 hi; ///< highest 32-bits of 64-bit value + } UINT64; + + // Create the Boolean type + #define TRUE 1 + #define FALSE 0 + typedef unsigned char BOOLEAN; + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV __pascal + #define ROMDATA __based( __segname( "_CODE" ) ) + #define _16BYTE_ALIGN __declspec(align(16)) + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma warning( disable : 4103 ) // Disable '#pragma pack' in .h warning + #pragma pack(1) + + // Disable WORD->BYTE automatic conversion warnings. Example: + // BYTE LocalByte; + // void MyFunc(BYTE val); + // + // MyFunc(LocalByte*2+1); // Warning, automatic conversion + // + // The problem is any time math is performed on a BYTE, it is converted to a + // WORD by MSVC 1.52c, and then when it is converted back to a BYTE, a warning + // is generated. Disable warning C4761 + #pragma warning( disable : 4761 ) + + #else + // ----------------------------------------------------------------------- + // Assume a 32-bit MSVC++ + // + // Disable the following warnings: + // 4100 - 'identifier' : unreferenced formal parameter + // 4276 - 'function' : no prototype provided; assumed no parameters + // 4214 - non standard extension used : bit field types other than int + // 4001 - nonstandard extension 'single line comment' was used + // 4142 - benign redefinition of type for following declaration + // - typedef char INT8 + #if defined (_M_IX86) + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __w64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #define _16BYTE_ALIGN __declspec(align(64)) + // 64 bit of compiler + #else + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306 4366) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __int64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #endif + #endif + // ----------------------------------------------------------------------- + // End of MS compiler versions + +#elif defined __GNUC__ + + #define IN + #define OUT + #define STATIC static + #define VOLATILE volatile + #define TRUE 1 + #define FALSE 0 +// #undef CONST + #define CONST const + #define ROMDATA + #define CALLCONV + #define _16BYTE_ALIGN __attribute__ ((aligned (16))) + #define _8BYTE_ALIGN __attribute__ ((aligned (8))) + #define _4BYTE_ALIGN __attribute__ ((aligned (4))) + #define _2BYTE_ALIGN __attribute__ ((aligned (2))) + #define _1BYTE_ALIGN __attribute__ ((aligned (1))) + + typedef unsigned char BOOLEAN; + typedef signed char INT8; + typedef signed short INT16; + typedef signed long INT32; + typedef char CHAR8; + typedef unsigned char UINT8; + typedef unsigned short UINT16; + typedef unsigned long UINT32; + typedef unsigned long UINTN; + typedef unsigned long long UINT64; + typedef long long INT64; + typedef void VOID; + //typedef unsigned long size_t; + + //#include <intrin.h> // MingW-w64 library header +#pragma pack(1) + +#define CODE_GROUP(arg) +#define RDATA_GROUP(arg) + +#define FUNC_ATTRIBUTE(arg) __attribute__((arg)) +#define MAKE_AS_A_STRING(arg) #arg +#include <stddef.h> +#include "gcc-intrin.h" + +#include <assert.h> +#include <console/console.h> +#include <console/loglevel.h> + +#ifndef NULL + #define NULL (void *)0 +#endif + +#else + // ----------------------------------------------------------------------- + // Unknown or unsupported compiler + // + #error "Unknown compiler in use" +#endif + +// ----------------------------------------------------------------------- +// Common definitions for all compilers +// + +//Support forward reference construct +#define AGESA_FORWARD_DECLARATION(x) typedef struct _##x x + +// The following are use in conformance to the UEFI style guide +#define IN +#define OUT + +#endif // _PORTING_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/Family/cpuFamRegisters.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/Family/cpuFamRegisters.h new file mode 100644 index 0000000000..c4be6286b6 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/Family/cpuFamRegisters.h @@ -0,0 +1,92 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309899 $ @e \$Date: 2014-12-23 02:21:13 -0600 (Tue, 23 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_FAM_REGISTERS_H_ +#define _CPU_FAM_REGISTERS_H_ + +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +// This define should be equal to the total number of families +// in the cpuFamily enum. +#define MAX_CPU_FAMILIES 15 +#define MAX_CPU_REVISIONS 15 // Max Cpu Revisions Per Family + +// CPU_LOGICAL_ID.Family equates +// Family 15h equates +#define AMD_FAMILY_15_CZ 0x0004u +#define AMD_FAMILY_CZ (AMD_FAMILY_15_CZ) +#define AMD_FAMILY_15 AMD_FAMILY_15_CZ + +// Family Unknown +#define AMD_FAMILY_UNKNOWN 0x8000u + + +// Family 15h CPU_LOGICAL_ID.Revision equates +// ------------------------------------- + + // Family 15h CZ steppings +#define AMD_F15_CZ_A0 0x0001u +#define AMD_F15_CZ_A1 0x0002u + // Family 15h Unknown stepping +#define AMD_F15_UNKNOWN 0x8000u +#define AMD_F15_CZ_Ax (AMD_F15_CZ_A0 | AMD_F15_CZ_A1) +#define AMD_F15_CZ_ALL (AMD_F15_CZ_Ax) + +#define AMD_F15_ALL AMD_F15_CZ_ALL + +#endif // _CPU_FAM_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/Feature/cpuCacheInit.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/Feature/cpuCacheInit.h new file mode 100644 index 0000000000..3ee71cd624 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/Feature/cpuCacheInit.h @@ -0,0 +1,137 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Execution Cache Allocation functions. + * + * Contains code for doing Execution Cache Allocation for ROM space + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_CACHE_INIT_H_ +#define _CPU_CACHE_INIT_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define BSP_STACK_SIZE_64K 65536 +#define BSP_STACK_SIZE_32K 32768 + +#define CORE0_STACK_SIZE 16384 +#define CORE1_STACK_SIZE 4096 + +#define AMD_MTRR_FIX4K_BASE 0x268 +#define AMD_MTRR_VARIABLE_BASE6 0x20C +#define AMD_MTRR_VARIABLE_BASE7 0x20E + +#define WP_IO 0x0505050505050505ull + +#define AGESA_CACHE_SIZE_REDUCED 1 +#define AGESA_CACHE_REGIONS_ACROSS_1MB 2 +#define AGESA_CACHE_REGIONS_ACROSS_4GB 3 +#define AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 4 +#define AGESA_CACHE_START_ADDRESS_LESS_D0000 5 +#define AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 6 +#define AGESA_DEALLOCATE_CACHE_REGIONS 7 + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ +/// Cache-As-Ram Executable region allocation modes +typedef enum { + LimitedByL2Size, ///< Execution space must be allocated from L2 + InfiniteExe, ///< Family can support unlimited Execution space + MaxCarExeMode ///< Used as limit or bounds check +} CAR_EXE_MODE; + +/// Cache Information +typedef struct { + IN UINT32 BspStackSize; ///< Stack size of BSP + IN UINT32 Core0StackSize; ///< Stack size of primary cores + IN UINT32 Core1StackSize; ///< Stack size of all non primary cores + IN UINT32 MemTrainingBufferSize; ///< Memory training buffer size + IN UINT32 SharedMemSize; ///< Shared memory size + IN UINT64 VariableMtrrMask; ///< Mask to apply before variable MTRR writes + IN UINT64 VariableMtrrHeapMask; ///< Mask to apply before variable MTRR writes for use in heap init. + IN UINT64 HeapBaseMask; ///< Mask used for the heap MTRR settings + IN CAR_EXE_MODE CarExeType; ///< Indicates which algorithm to use when allocating EXE space +} CACHE_INFO; + +/// Merged memory region overlap type +typedef enum { + EmptySet, ///< One of the regions is zero length + Disjoint, ///< The two regions do not touch + Adjacent, ///< one region is next to the other, no gap + CommonEnd, ///< regions overlap with a common end point + Extending, ///< the 2nd region is extending the size of the 1st + Contained, ///< the 2nd region is wholely contained inside the 1st + CommonStartContained, ///< the 2nd region is contained in the 1st with a common start + Identity, ///< the two regions are the same + CommonStartExtending, ///< the 2nd region has same start as 1st, but is larger size + NotCombinable ///< the combined regions do not follow the cache block rules +} OVERLAP_TYPE; + +/// Result of merging two memory regions for cache coverage +typedef struct { + IN OUT UINT32 MergedStartAddr; ///< Start address of the merged regions + IN OUT UINT32 MergedSize; ///< Size of the merged regions + OUT UINT32 OverlapAmount; ///< the size of the overlapping section + OUT OVERLAP_TYPE OverlapType; ///< indicates how the two regions overlap +} MERGED_CACHE_REGION; + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ +AGESA_STATUS +AllocateExecutionCache ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr + ); + +#endif // _CPU_CACHE_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuEarlyInit.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuEarlyInit.h new file mode 100644 index 0000000000..7efbc523e4 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuEarlyInit.h @@ -0,0 +1,213 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Reset API, and related functions and structures. + * + * Contains code that initialized the CPU after early reset. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_EARLY_INIT_H_ +#define _CPU_EARLY_INIT_H_ + + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ +AGESA_FORWARD_DECLARATION (CPU_CORE_LEVELING_FAMILY_SERVICES); + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +#define CPU_BRAND_ID_LENGTH 48 // Total number of characters supported +#define LOW_NODE_DEVICEID 24 +#define NB_CAPABILITIES 0xE8 //Function 3 Registers +//---------------------------------------------------------------------------- +// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/* All lengths are in bytes */ +#define MICROCODE_TRIADE_SIZE 28 +#define MICROCODE_HEADER_LENGTH 64 + +/** + * @page ucodeflag Microcode Patches Signature Guide + * + * We mark patches in the ROM with a signature so that they can be easily found + * + * @anchor Microcode Patch Signature + * @li @e Microcode Patch Signature @n + * Microcode patches are marked by adding a signature before patches in the ROM image to + * help identify where they are located. + * There're two kind of signatures. One is '$UCODE2K', it indicates there's a following patch with 2K size. + * The other is '$UCODE4K', it indicates there's a following patch with 4K size. + * If you want to know the patch level / equivalent ID, please consult the BKDG for patch header format. + * + * + */ +/// Microcode patch flag for replacement +typedef struct { + IN UINT8 MicrocodePatchesFlag[8]; ///< a flag followed by microcode +} MICROCODE_PATCHES_FLAG; + +#define UCODE_2K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '2', 'K'}}; +#define UCODE_4K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '4', 'K'}}; +#define UCODE_VS_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', 'V', 'S'}}; + +/* Offsets in UCODE PATCH Header */ +/* Note: Header is 64 bytes */ +#define DATE_CODE_OFFSET 0 // 4 bytes +#define PATCH_ID 4 // 4 bytes +#define MICROCODE_PATH_DATA_ID 8 // 2 bytes +#define MICROCODE_PATCH_DATA_LENGTH 10 // 1 byte +#define MICROCODE_PATCH_DATA_CHECKSUM 12 // 4 bytes +#define CHIPSET_1_DEVICE_ID 16 // 4 bytes +#define CHIPSET_2_DEVICE_ID 20 // 4 bytes +#define PROCESSOR_REV_ID 24 // 2 bytes +#define CHIPSET_1_REV_ID 26 // 1 byte +#define CHIPSET_2_REV_ID 27 // 1 byte + +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// A structure representing BrandId[15:0] from +/// CPUID Fn8000_0001_EBX +typedef struct { + UINT8 String1:4; ///< An index to a string value used to create the name string + UINT8 String2:4; ///< An index to a string value used to create the name string + UINT8 Page:1; ///< An index to the appropriate page for the String1, String2, and Model values + UINT8 Model:7; ///< A field used to create the model number in the name string + UINT8 Socket:4; ///< Specifies the package type + UINT8 Cores:4; ///< Identifies how many physical cores are present +} AMD_CPU_BRAND_DATA; + +/// A structure containing string1 and string2 values +/// as well as information pertaining to their usage +typedef struct { + IN UINT8 Cores; ///< Appropriate number of physical cores + IN UINT8 Page; ///< This string's page number + IN UINT8 Index; ///< String index + IN UINT8 Socket; ///< Package type information + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 Stringlength; ///< Number of characters in the string +} AMD_CPU_BRAND; + +/// An entire CPU brand table. +typedef struct { + UINT8 NumberOfEntries; ///< The number of entries in the table. + CONST AMD_CPU_BRAND *Table; ///< The table entries. +} CPU_BRAND_TABLE; + +/** + * Set down core register + * + * @CpuServiceInstances + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] Socket Socket ID. + * @param[in] Module Module ID in socket. + * @param[in] LeveledCores Number of core. + * @param[in] CoreLevelMode Core level mode. + * @param[in] StdHeader Header for library and services. + * + * @retval TRUE Down Core register is updated. + * @retval FALSE Down Core register is not updated. + */ +typedef BOOLEAN (F_CPU_SET_DOWN_CORE_REGISTER) ( + IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices, + IN UINT32 *Socket, + IN UINT32 *Module, + IN UINT32 *LeveledCores, + IN CORE_LEVELING_TYPE CoreLevelMode, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Reference to a method +typedef F_CPU_SET_DOWN_CORE_REGISTER *PF_CPU_SET_DOWN_CORE_REGISTER; + +/** + * Provide the interface to the Core Leveling Family Specific Services. + * + * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!). + * Each supported Family must provide an implementation for all methods in this interface, even if the + * implementation is a CommonReturn(). + */ +struct _CPU_CORE_LEVELING_FAMILY_SERVICES { // See Forward Declaration above + UINT16 Revision; ///< Interface version + // Public Methods. + PF_CPU_SET_DOWN_CORE_REGISTER SetDownCoreRegister; ///< Method: Set down core register. +}; + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +// These are P U B L I C functions, used by IBVs +AGESA_STATUS +AmdCpuEarly ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +// These are P U B L I C functions, used by AGESA +AGESA_STATUS +PmInitializationAtEarly ( + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdCpuEarlyInitializer ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr + ); + +#endif // _CPU_EARLY_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuLateInit.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuLateInit.h new file mode 100644 index 0000000000..7cef71d4c3 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuLateInit.h @@ -0,0 +1,1045 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Late Init API functions Prototypes. + * + * Contains code for doing any late CPU initialization + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_LATE_INIT_H_ +#define _CPU_LATE_INIT_H_ + +#include "Filecode.h" + +// Forward declaration needed for multi-structure mutual references. +AGESA_FORWARD_DECLARATION (PROC_FAMILY_TABLE); +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +//---------------------------------------------------------------------------- +// DMI DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AP_LATE_TASK_GET_TYPE4_TYPE7 (PROC_CPU_FEATURE_CPUDMI_FILECODE) +// SMBIOS constant definition +#define CENTRAL_PROCESSOR 0x03 +#define EXTERNAL_CLOCK_DFLT 200 +#define EXTERNAL_CLOCK_100MHZ 100 +#define P_FAMILY_UNKNOWN 0x02 +#define P_ENGINEERING_SAMPLE 0x00 +#define P_CHARACTERISTICS 0x4 +#define CACHE_CFG_L1 0x180 +#define CACHE_CFG_L2 0x181 +#define CACHE_CFG_L3 0x182 +#define SRAM_TYPE 0x10 +#define ERR_CORRECT_TYPE 0x06 +#define CACHE_TYPE 0x05 +#define DMI_ASSOCIATIVE_OTHER 0x01 +#define DMI_ASSOCIATIVE_UNKNOWN 0x02 +#define DMI_ASSOCIATIVE_DIRECT_MAPPED 0x03 +#define DMI_ASSOCIATIVE_2_WAY 0x04 +#define DMI_ASSOCIATIVE_4_WAY 0x05 +#define DMI_ASSOCIATIVE_FULLY 0x06 +#define DMI_ASSOCIATIVE_8_WAY 0x07 +#define DMI_ASSOCIATIVE_16_WAY 0x08 +#define DMI_ASSOCIATIVE_12_WAY 0x09 +#define DMI_ASSOCIATIVE_24_WAY 0x0A +#define DMI_ASSOCIATIVE_32_WAY 0x0B +#define DMI_ASSOCIATIVE_48_WAY 0x0C +#define DMI_ASSOCIATIVE_64_WAY 0x0D +#define DMI_ASSOCIATIVE_20_WAY 0x0E +#define SOCKET_POPULATED 0x40 +#define CPU_STATUS_UNKNOWN 0x00 +#define CPU_STATUS_ENABLED 0x01 + +// Processor Upgrade Definition +#define P_UPGRADE_UNKNOWN 0x02 +#define P_UPGRADE_NONE 0x06 + +//---------------------------------------------------------------------------- +// CDIT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH 4 // Num domains is a 4-bytes unsigned integer + + +//---------------------------------------------------------------------------- +// P-STATE DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +//------------------------------------- +// ERROR Codes +//------------------------------------- +#define NO_ERROR 0x0 +#define USER_DISABLE_ERROR 0x01 // User disabled SSDT generation +#define CORES_MISSMATCH_PSS_ERROR 0x02 // No PSS match +#define PNOW_SUPPORT_ERROR 0x04 // One of the Cores do not support PNOW! +#define PWR_FREQ_MATCH_ERROR 0x08 // FREQ and PWR mismatch +#define NO_PSS_SIZE_ERROR 0x10 // Error in PSS Size +#define INVALID_PSTATE_ERROR 0x20 // Invalid Max or only 1 P-State available +#define NO_PSS_ENTRY 0x0FFFFul +#define INVALID_FREQ 0x0FFFFFFFFul + +//------------------------- +// Default definitions +// AMD BKDG default values +//------------------------- +#define DEFAULT_ISOCH_RELIEF_TIME IRT_80uS +#define DEFAULT_RAMP_VOLTAGE_OFFSET RVO_50mV +#define DEFAULT_MAX_VOLTAGE_STEP MVS_25mV +#define DEFAULT_PERF_PRESENT_CAP 0 // default for Desktop +#define DEFAULT_VOLTAGE_STABLE_TIME (100 / 20) // 100uS +#define DEFAULT_PLL_LOCK_TIME 2 // 2uS +#define DEFAULT_TRANSITION_LATENCY 100 // 100uS +#define DEFAULT_BUS_MASTER_LATENCY 9 // 9uS +#define DEFAULT_CPU_SCOPE_NUMBER "0UPC" + +// Defines for Common ACPI +// ----------------------------- +#define SCOPE_OPCODE 0x10 +#define NAME_OPCODE 0x08 +#define METHOD_OPCODE 0x14 +#define PACKAGE_OPCODE 0x12 +#define BUFFER_OPCODE 0x11 +#define BYTE_PREFIX_OPCODE 0x0A +#define WORD_PREFIX_OPCODE 0x0B +#define DWORD_PREFIX_OPCODE 0x0C +#define RETURN_OPCODE 0xA4 +#define ACPI_BUFFER 0x080A0B11ul + +// Generic Register Descriptor (GDR) Fields +#define GDR_ASI_SYSTEM_IO 0x01 // Address Space ID +#define GDR_ASZ_BYTE_ACCESS 0x01 // Address Size + +// Defines for ACPI Scope Table +// ---------------------------- +#define SCOPE_LENGTH (SCOPE_STRUCT_SIZE + \ + PCT_STRUCT_SIZE + \ + PSS_HEADER_STRUCT_SIZE + \ + PSS_BODY_STRUCT_SIZE + \ + PPC_HEADER_BODY_STRUCT_SIZE) +#define SCOPE_VALUE1 0x5C +#define SCOPE_VALUE2 0x2E +#define SCOPE_NAME__ '_' +#define SCOPE_NAME_P 'P' +#define SCOPE_NAME_R 'R' +#define SCOPE_NAME_S 'S' +#define SCOPE_NAME_B 'B' +#define SCOPE_NAME_C 'C' +#define SCOPE_NAME_U 'U' +#define SCOPE_NAME_0 '0' +#define SCOPE_NAME_1 '1' +#define SCOPE_NAME_2 '2' +#define SCOPE_NAME_3 '3' +#define SCOPE_NAME_A 'A' + +#ifdef OEM_SCOPE_NAME + #if (OEM_SCOPE_NAME > 'Z') || (OEM_SCOPE_NAME < 'A') + #error "OEM_SCOPE_NAME: it should be only one char long AND a valid letter (A~Z)" + #endif + #define SCOPE_NAME_VALUE OEM_SCOPE_NAME +#else + #define SCOPE_NAME_VALUE SCOPE_NAME_C +#endif // OEM_SCOPE_NAME + +#ifdef OEM_SCOPE_NAME1 + #if (!(((OEM_SCOPE_NAME1 >= 'A') && (OEM_SCOPE_NAME1 <= 'Z')) || \ + ((OEM_SCOPE_NAME1 >= '0') && (OEM_SCOPE_NAME1 <= '9')) || \ + (OEM_SCOPE_NAME1 == '_'))) + #error "OEM_SCOPE_NAME1: it should be only one char long AND a valid letter (0~9, A~F)" + #endif + #define SCOPE_NAME_VALUE1 OEM_SCOPE_NAME1 +#else + #define SCOPE_NAME_VALUE1 SCOPE_NAME_0 +#endif // OEM_SCOPE_NAME + +// Defines for PCT Control and Status Table +// ---------------------------------------- +#define PCT_NAME__ '_' +#define PCT_NAME_P 'P' +#define PCT_NAME_C 'C' +#define PCT_NAME_T 'T' +#define PCT_VALUE1 0x11022C12ul +#define PCT_VALUE2 0x0A14 +#define PCT_VALUE3 0x11 +#define GENERIC_REG_DESCRIPTION 0x82 +#define PCT_LENGTH 0x0C +#define PCT_ADDRESS_SPACE_ID 0x7F +#define PCT_REGISTER_BIT_WIDTH 0x40 +#define PCT_REGISTER_BIT_OFFSET 0x00 +#define PCT_RESERVED 0x00 +#define PCT_CONTROL_REG_LO 0xC0010062ul +#define PCT_CONTROL_REG_HI 0x00 +#define PCT_VALUE4 0x14110079ul +#define PCT_VALUE5 0x110A +#define PCT_STATUS_REG_LO 0x00 +#define PCT_STATUS_REG_HI 0x00 +#define PCT_VALUE6 0x0079 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_NAME__ '_' +#define PSS_NAME_X 'X' +#define PSS_NAME_P 'P' +#define PSS_NAME_S 'S' +#define PSS_LENGTH (sizeof pssBodyStruct + 3) +#define NUM_OF_ITEMS_IN_PSS 0x00 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_PKG_LENGTH 0x20 // PSS_BODY_STRUCT_SIZE - 1 +#define PSS_NUM_OF_ELEMENTS 0x06 +#define PSS_FREQUENCY 0x00 +#define PSS_POWER 0x00 +#define PSS_TRANSITION_LATENCY DEFAULT_TRANSITION_LATENCY +#define PSS_BUS_MASTER_LATENCY DEFAULT_BUS_MASTER_LATENCY +#define PSS_CONTROL ((DEFAULT_ISOCH_RELIEF_TIME << 30) + \ + (DEFAULT_RAMP_VOLTAGE_OFFSET << 28) + \ + (DEFAULT_EXT_TYPE << 27) + \ + (DEFAULT_PLL_LOCK_TIME << 20) + \ + (DEFAULT_MAX_VOLTAGE_STEP << 18) + \ + (DEFAULT_VOLTAGE_STABLE_TIME << 11) + \ + (PSS_VID << 6) + PSS_FID) +#define PSS_STATUS (DEFAULT_EXTENDED_TYPE << 11) + (PSS_VID << 6) + (PSS_FID) + +// Defines for XPSS Header Table +// ---------------------------- +#define XPSS_PKG_LENGTH 0x47 // XPSS_BODY_STRUCT_SIZE - 1 +#define XPSS_NUM_OF_ELEMENTS 0x08 +#define XPSS_ACPI_BUFFER 0x080A0B11ul + + +// Defines for PPC Header Table +// ---------------------------- +#define PPC_NAME__ '_' +#define PPC_NAME_P 'P' +#define PPC_NAME_C 'C' +#define PPC_NAME_V 'V' +#define PPC_METHOD_FLAGS 0x00; +#define PPC_VALUE1 0x0A; + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_NAME__ '_' +#define PSD_NAME_P 'P' +#define PSD_NAME_S 'S' +#define PSD_NAME_D 'D' +#define PSD_HEADER_LENGTH (PSD_BODY_STRUCT_SIZE + 2) +#define PSD_VALUE1 0x01 + + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_PKG_LENGTH (PSD_BODY_STRUCT_SIZE - 1) +#define NUM_OF_ENTRIES 0x05 +#define PSD_NUM_OF_ENTRIES 0x05 +#define PSD_REVISION 0x00 +#define PSD_DEPENDENCY_DOMAIN 0x00 +#define PSD_COORDINATION_TYPE_HW_ALL 0xFE +#define PSD_COORDINATION_TYPE_SW_ANY 0xFD +#define PSD_COORDINATION_TYPE_SW_ALL 0xFC +#define PSD_NUM_OF_PROCESSORS 0x01 +#define PSD_TWO_CORES_PER_COMPUTE_UNIT 0x02 +#define PSD_THREE_CORES_PER_COMPUTE_UNIT 0x03 +#define PSD_FOUR_CORES_PER_COMPUTE_UNIT 0x04 + + +#define CUSTOM_PSTATE_FLAG 0x55 +#define PSTATE_FLAG_1 0x55 +#define TARGET_PSTATE_FLAG 0xAA +#define PSTATE_FLAG_2 0xAA + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// ACPI P-States AML TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +//-------------------------------------------- +// AML code definition +// (Scope) +//--------------------------------------------- +/// SCOPE +typedef struct _SCOPE { + UINT8 ScopeOpcode; ///< Opcode + UINT16 ScopeLength; ///< Scope Length + UINT8 ScopeValue1; ///< Value1 + UINT8 ScopeValue2; ///< Value2 + UINT8 ScopeNamePt1a__; ///< Name Pointer + UINT8 ScopeNamePt1a_P; ///< Name Pointer + UINT8 ScopeNamePt1a_R; ///< Name Pointer + UINT8 ScopeNamePt1b__; ///< Name Pointer + UINT8 ScopeNamePt2a_C; ///< Name Pointer + UINT8 ScopeNamePt2a_P; ///< Name Pointer + UINT8 ScopeNamePt2a_U; ///< Name Pointer + UINT8 ScopeNamePt2a_0; ///< Name Pointer +} SCOPE; +#define SCOPE_STRUCT_SIZE 13 // 13 Bytes + +//-------------------------------------------- +// AML code definition +// (PCT Header and Body) +//--------------------------------------------- + +///Performance Control Header +typedef struct _PCT_HEADER_BODY { + UINT8 NameOpcode; ///< Opcode + UINT8 PctName_a__; ///< String "_" + UINT8 PctName_a_P; ///< String "P" + UINT8 PctName_a_C; ///< String "C" + UINT8 PctName_a_T; ///< String "T" + UINT32 Value1; ///< Value1 + UINT16 Value2; ///< Value2 + UINT8 Value3; ///< Value3 + UINT8 GenericRegDescription1; ///< Generic Reg Description + UINT16 Length1; ///< Length1 + UINT8 AddressSpaceId1; ///< PCT Address Space ID + UINT8 RegisterBitWidth1; ///< PCT Register Bit Width + UINT8 RegisterBitOffset1; ///< PCT Register Bit Offset + UINT8 Reserved1; ///< Reserved + UINT32 ControlRegAddressLo; ///< Control Register Address Low + UINT32 ControlRegAddressHi; ///< Control Register Address High + UINT32 Value4; ///< Value4 + UINT16 Value5; ///< Value 5 + UINT8 GenericRegDescription2; ///< Generic Reg Description + UINT16 Length2; ///< Length2 + UINT8 AddressSpaceId2; ///< PCT Address Space ID + UINT8 RegisterBitWidth2; ///< PCT Register Bit Width + UINT8 RegisterBitOffset2; ///< PCT Register Bit Offset + UINT8 Reserved2; ///< Reserved + UINT32 StatusRegAddressLo; ///< Control Register Address Low + UINT32 StatusRegAddressHi; ///< Control Register Address High + UINT16 Value6; ///< Values +} PCT_HEADER_BODY; +#define PCT_STRUCT_SIZE 50 // 50 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Header) +//-------------------------------------------- +///Performance Supported States Header +typedef struct _PSS_HEADER { + UINT8 NameOpcode; ///< Opcode + UINT8 PssName_a__; ///< String "_" + UINT8 PssName_a_P; ///< String "P" + UINT8 PssName_a_S; ///< String "S" + UINT8 PssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< Package Opcode + UINT16 PssLength; ///< PSS Length + UINT8 NumOfItemsInPss; ///< Number of Items in PSS +} PSS_HEADER; +#define PSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Body) +//-------------------------------------------- +///Performance Supported States Body +typedef struct _PSS_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT8 DwordPrefixOpcode5; ///< Prefix Opcode5 + UINT32 Control; ///< Control + UINT8 DwordPrefixOpcode6; ///< Prefix Opcode6 + UINT32 Status; ///< Status +} PSS_BODY; +#define PSS_BODY_STRUCT_SIZE 33 // 33 Bytes + + +/*-------------------------------------------- + * AML code definition + * (XPSS Header) + *-------------------------------------------- + */ +/// Extended PSS Header +typedef struct _XPSS_HEADER { + UINT8 NameOpcode; ///< 08h + UINT8 XpssName_a_X; ///< String "X" + UINT8 XpssName_a_P; ///< String "P" + UINT8 XpssName_a_S; ///< String "S" + UINT8 XpssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< 12h + UINT16 XpssLength; ///< XPSS Length + UINT8 NumOfItemsInXpss; ///< Number of Items in XPSS +} XPSS_HEADER; +#define XPSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + +/*-------------------------------------------- + * AML code definition + * (XPSS Body) + *-------------------------------------------- + */ +/// Extended PSS Body +typedef struct _XPSS_BODY { + UINT8 PkgOpcode; ///< 12h + UINT8 PkgLength; ///< Package Length + UINT8 XpssValueTbd; ///< XPSS Value + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT32 ControlBuffer; ///< Control Buffer + UINT32 ControlLo; ///< Control Low + UINT32 ControlHi; ///< Control High + UINT32 StatusBuffer; ///< Status Buffer + UINT32 StatusLo; ///< Status Low + UINT32 StatusHi; ///< Status High + UINT32 ControlMaskBuffer; ///< Control Mask Buffer + UINT32 ControlMaskLo; ///< Control Mask Low + UINT32 ControlMaskHi; ///< Control Mask High + UINT32 StatusMaskBuffer; ///< Status Mask Buffer + UINT32 StatusMaskLo; ///< Status Mask Low + UINT32 StatusMaskHi; ///< Status Mask High +} XPSS_BODY; +#define XPSS_BODY_STRUCT_SIZE 72 // 72 Bytes + +/*-------------------------------------------- + * AML code definition + * (PPC Header and Body) + *-------------------------------------------- + */ +/// Performance Present Capabilities Header +typedef struct _PPC_HEADER_BODY { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PpcName_a_P; ///< String "P" + UINT8 PpcName_b_P; ///< String "P" + UINT8 PpcName_a_C; ///< String "C" + UINT8 PpcName_a_V; ///< String "V" + UINT8 Value1; ///< Value + UINT8 DefaultPerfPresentCap; ///< Default Perf Present Cap + UINT8 MethodOpcode; ///< Method Opcode + UINT8 PpcLength; ///< Method Length + UINT8 PpcName_a__; ///< String "_" + UINT8 PpcName_c_P; ///< String "P" + UINT8 PpcName_d_P; ///< String "P" + UINT8 PpcName_b_C; ///< String "C" + UINT8 MethodFlags; ///< Method Flags + UINT8 ReturnOpcode; ///< Return Opcoce + UINT8 PpcName_e_P; ///< String "P" + UINT8 PpcName_f_P; ///< String "P" + UINT8 PpcName_c_C; ///< String "C" + UINT8 PpcName_b_V; ///< String "V" + +} PPC_HEADER_BODY; +#define PPC_HEADER_BODY_STRUCT_SIZE 19 // 19 Bytes +#define PPC_METHOD_LENGTH 11 // 11 Bytes + + +/*-------------------------------------------- + * AML code definition + * (PSD Header) + *-------------------------------------------- + */ +/// P-State Dependency Header +typedef struct _PSD_HEADER { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PsdName_a__; ///< String "_" + UINT8 PsdName_a_P; ///< String "P" + UINT8 PsdName_a_S; ///< String "S" + UINT8 PsdName_a_D; ///< String "D" + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PsdLength; ///< PSD Length + UINT8 Value1; ///< Value +} PSD_HEADER; +#define PSD_HEADER_STRUCT_SIZE 8 // 8 Bytes + +/*-------------------------------------------- + * AML code definition + * (PSD Body) + *-------------------------------------------- + */ +/// P-State Dependency Body +typedef struct _PSD_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfEntries; ///< Number of Entries + UINT8 BytePrefixOpcode1; ///< Prefix Opcode1 in Byte + UINT8 PsdNumOfEntries; ///< PSD Number of Entries + UINT8 BytePrefixOpcode2; ///< Prefix Opcode2 in Byte + UINT8 PsdRevision; ///< PSD Revision + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 in DWord + UINT32 DependencyDomain; ///< Dependency Domain + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 in DWord + UINT32 CoordinationType; ///< (0xFC = SW_ALL, 0xFD = SW_ANY, 0xFE = HW_ALL) + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 in DWord + UINT32 NumOfProcessors; ///< Number of Processors +} PSD_BODY; +#define PSD_BODY_STRUCT_SIZE 22 // 22 Bytes + +//---------------------------------------------------------------------------- +// WHEA TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +/// HEST MCE TABLE +typedef struct _AMD_HEST_MCE_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_MCE structure. + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCapInitDataMSD; ///< the machine check global capability register(MCG_CAP). + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCtrlInitDataMSD; ///< the machine check global control register(MCG_CTL). + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[7]; ///< reserve 7 bytes as spec's required +} AMD_HEST_MCE_TABLE; + +/// HEST CMC TABLE +typedef struct _AMD_HEST_CMC_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_CMC structure. + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[3]; ///< reserve 3 bytes as spec's required +} AMD_HEST_CMC_TABLE; + +/// HEST BANK +typedef struct _AMD_HEST_BANK { + UINT8 BankNum; ///< Zero-based index identifies the machine check error bank. + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check bank + ///< is to be cleared during system initialization. + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT32 CtrlRegMSRAddr; ///< Address of the hardware bank's control MSR. Ignored if zero. + + UINT32 CtrlInitDataLSD; ///< This is the value the OS will program into the machine check + UINT32 CtrlInitDataMSD; ///< bank's control register + UINT32 StatRegMSRAddr; ///< Address of the hardware bank's MCi_STAT MSR. Ignored if zero. + UINT32 AddrRegMSRAddr; ///< Address of the hardware bank's MCi_ADDR MSR. Ignored if zero. + UINT32 MiscRegMSRAddr; ///< Address of the hardware bank's MCi_MISC MSR. Ignored if zero. +} AMD_HEST_BANK; + +/// Initial data of AMD_HEST_BANK +typedef struct _AMD_HEST_BANK_INIT_DATA { + UINT32 CtrlInitDataLSD; ///< Initial data of CtrlInitDataLSD + UINT32 CtrlInitDataMSD; ///< Initial data of CtrlInitDataMSD + UINT32 CtrlRegMSRAddr; ///< Initial data of CtrlRegMSRAddr + UINT32 StatRegMSRAddr; ///< Initial data of StatRegMSRAddr + UINT32 AddrRegMSRAddr; ///< Initial data of AddrRegMSRAddr + UINT32 MiscRegMSRAddr; ///< Initial data of MiscRegMSRAddr +} AMD_HEST_BANK_INIT_DATA; + +/// MSR179 Global Machine Check Capabilities data struct +typedef struct _MSR_MCG_CAP_STRUCT { + UINT64 Count:8; ///< Indicates the number of + ///< error-reporting banks visible to each core + UINT64 McgCtlP:1; ///< 1=The machine check control registers + UINT64 Rsvd:55; ///< reserved +} MSR_MCG_CAP_STRUCT; + +/// Initial data of WHEA +typedef struct _AMD_WHEA_INIT_DATA { + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into the machine + UINT32 GlobCapInitDataMSD; ///< Check global capability register + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will grogram into the machine + UINT32 GlobCtrlInitDataMSD; ///< Check global control register + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check + ///< bank is to be cleared during system initialization + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT8 HestBankNum; ///< Number of HEST Bank + AMD_HEST_BANK_INIT_DATA *HestBankInitData; ///< Pointer to Initial data of HEST Bank +} AMD_WHEA_INIT_DATA; + +//---------------------------------------------------------------------------- +// DMI TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// DMI brand information +typedef struct { + UINT16 String1:4; ///< String1 + UINT16 String2:4; ///< String2 + UINT16 Model:7; ///< Model + UINT16 Pg:1; ///< Page +} BRAND_ID; + +/// DMI cache information +typedef struct { + UINT32 L1CacheSize; ///< L1 cache size + UINT8 L1CacheAssoc; ///< L1 cache associativity + UINT32 L2CacheSize; ///< L2 cache size + UINT8 L2CacheAssoc; ///< L2 cache associativity + UINT32 L3CacheSize; ///< L3 cache size + UINT8 L3CacheAssoc; ///< L3 cache associativity +} CPU_CACHE_INFO; + +/// DMI processor information +typedef struct { + UINT8 ExtendedFamily; ///< Extended Family + UINT8 ExtendedModel; ///< Extended Model + UINT8 BaseFamily; ///< Base Family + UINT8 BaseModel; ///< Base Model + UINT8 Stepping; ///< Stepping + UINT8 PackageType; ///< PackageType + BRAND_ID BrandId; ///< BrandId which contains information about String1, String2, Model and Page + UINT8 TotalCoreNumber; ///< Number of total cores + UINT8 EnabledCoreNumber; ///< Number of enabled cores + UINT8 ProcUpgrade; ///< ProcUpdrade + CPU_CACHE_INFO CacheInfo; ///< CPU cache info +} CPU_TYPE_INFO; + +/// A structure containing processor name string and +/// the value that should be provide to DMI type 4 processor family +typedef struct { + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 T4ProcFamilySetting; ///< The value set to DMI type 4 processor family +} CPU_T4_PROC_FAMILY; + +/// DMI ECC information +typedef struct { + BOOLEAN EccCapable; ///< ECC Capable +} CPU_GET_MEM_INFO; + +/* Transfer vectors for DMI family specific routines */ +typedef VOID OPTION_DMI_GET_CPU_INFO ( + IN OUT CPU_TYPE_INFO *CpuInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_PROC_FAMILY ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT8 OPTION_DMI_GET_VOLTAGE ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_MAX_SPEED ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_EXT_CLOCK ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_MEM_INFO ( + IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Brand table entry format +typedef struct { + UINT8 PackageType; ///< Package type + UINT8 PgOfBrandId; ///< Page + UINT8 NumberOfCores; ///< Number of cores + UINT8 String1ofBrandId; ///< String1 + UINT8 ValueSetToDmiTable; ///< The value which will should be set to DMI table +} DMI_BRAND_ENTRY; + +/// Family specific data table structure +struct _PROC_FAMILY_TABLE { + UINT64 ProcessorFamily; ///< processor + OPTION_DMI_GET_CPU_INFO *DmiGetCpuInfo; ///< transfer vectors + OPTION_DMI_GET_PROC_FAMILY *DmiGetT4ProcFamily; ///< Get DMI type 4 processor family information + OPTION_DMI_GET_VOLTAGE *DmiGetVoltage; ///< vector for reading voltage + OPTION_DMI_GET_MAX_SPEED *DmiGetMaxSpeed; ///< vector for reading speed + OPTION_DMI_GET_EXT_CLOCK *DmiGetExtClock; ///< vector for reading external clock speed + OPTION_DMI_GET_MEM_INFO *DmiGetMemInfo; ///< Get memory information + UINT8 LenBrandList; ///< size of brand table + CONST DMI_BRAND_ENTRY *DmiBrandList; ///< translate brand info to DMI identifier +}; + +//---------------------------------------------------------------------------- +// TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Format for Header +typedef struct { + UINT8 Sign[4]; ///< Signature + UINT32 TableLength; ///< Table Length + UINT8 Revision; ///< Revision + UINT8 Checksum; ///< Checksum + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision +} ACPI_TABLE_HEADER; + +//---------------------------------------------------------------------------- +// CRAT TYPEDEFS, STRUCTURES, ENUMS +// Component Resource Affinity Table +//---------------------------------------------------------------------------- +/// Format for CRAT Header +typedef struct { + UINT8 Sign[4]; ///< CRAT, Signature for the Component Resource Affinity Table. + UINT32 Length; ///< Length, in bytes, of the entire CRAT + UINT8 Revision; ///< 0 + UINT8 Checksum; ///< Entire table must sum to zero. + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision + UINT32 TotalEntries; ///< total number[n] of entries in the CRAT + UINT16 NumDomains; ///< Number of HSA proximity domains + UINT8 Reserved[6]; ///< Reserved +} CRAT_HEADER; + +/// Flags field of the CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 CpuPresent:1; ///< Cpu Present + UINT32 GpuPresent:1; ///< Gpu Present + UINT32 IommuPresent:1; ///< IOMMU Present + UINT32 :27; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT_FLAG; + +/// CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT8 Type; ///< 0 - CRAT HSA Processing Unit Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_HSA_PROCESSING_UNIT_FLAG Flags; ///< Flags - HSA Processing Unit Affinity Structure + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 ProcessorIdLow; ///< Low value of the logical processor included in this HSA proximity domain + UINT16 NumCPUCores; ///< Indicates count of CCompute execution units present in this APU node. + UINT16 NumSIMDCores; ///< Indicates maximum count of HCompute SIMD cores present in this node. + UINT16 MaxWavesSIMD; ///< This identifies the max. number of launched waves per SIMD. + UINT16 IoCount; ///< Number of discoverable IO Interfaces connecting this node to other components. + UINT16 HSACapability; ///< Must be 0 + UINT16 LDSSizeInKB; ///< Size of LDS memory per SIMD Wavefront + UINT8 WaveFrontSize; ///< 64, may be 32 for some FSA based architectures + UINT8 NumBanks; ///< Number of Banks or "Shader Engines", typically 1 or 2 + UINT16 uEngineIdentifier; ///< Identifier (Rev) of the GPU uEngine or firmware + UINT8 NumArrays; ///< Number of SIMD Arrays per Engine + UINT8 NumCUPerArray; ///< Number of Compute Units (CU) per SIMD Array + UINT8 NumSIMDPerCU; ///< Number of SIMD representing a Compute Unit + UINT8 MaxSlotsScratchCU; ///< Max. Number of temp. memory ("scratch") wave slots + ///< available to access, may be 0 if HW has no restrictions + UINT8 Reserved1[4]; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT; + +/// Flags field of the CRAT Memory Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 NonVolatile:1; ///< If set, the memory region represents Non-Volatile memory + UINT32 :29; ///< Reserved +} CRAT_MEMORY_FLAG; + +/// CRAT Memory Affinity Structure +typedef struct { + UINT8 Type; ///< 1 - CRAT Memory Affinity Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_MEMORY_FLAG Flags; ///< Flags - Memory Affinity Structure. Indicates whether the region of memory is enabled and can be hot plugged + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 BaseAddressLow; ///< Low 32Bits of the Base Address of the memory range + UINT32 BaseAddressHigh; ///< High 32Bits of the Base Address of the memory range + UINT32 LengthLow; ///< Low 32Bits of the length of the memory range + UINT32 LengthHigh; ///< High 32Bits of the length of the memory range + UINT32 Width; ///< Memory width - Specifies the number of parallel bits of the memory interface + UINT8 Reserved1[8]; ///< Reserved +} CRAT_MEMORY; + +/// Flags field of the CRAT Cache Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataCache:1; ///< 1 if cache includes data + UINT32 InstructionCache:1; ///< 1 if cache includes instructions + UINT32 CpuCache:1; ///< 1 if cache is part of CPU functionality + UINT32 SimdCache:1; ///< 1 if cache is part of SIMD functionality + UINT32 :27; ///< Reserved +} CRAT_CACHE_FLAG; + +/// CRAT Cache Affinity Structure +typedef struct { + UINT8 Type; ///< 2 - CRAT Cache Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_CACHE_FLAG Flags; ///< Flags - Cache Affinity Structure. Indicates whether the region of cache is enabled + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 CacheSize; ///< Cache size in KB + UINT8 CacheLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 LinesPerTag; ///< Cache Lines per tag + UINT16 CacheLineSize; ///< Cache line size in bytes + UINT8 Associativity; ///< Cache associativity + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative + UINT8 CacheProperties; ///< Cache Properties bits [2:0] represent Inclusive/Exclusive property encoded. + ///< 0: Cache is strictly exclusive to lower level caches. + ///< 1: Cache is mostly exclusive to lower level caches. + ///< 2: Cache is strictly inclusive to lower level caches. + ///< 3: Cache is mostly inclusive to lower level caches. + ///< 4: Cache is a "constant cache" (= explicit update) + ///< 5: Cache is a "specialty cache" (e.g. Texture cache) + ///< 6-7: Reserved + ///< CacheProperties bits [7:3] are reserved + UINT16 CacheLatency; ///< Cost of time to access cache described in nanoseconds. + UINT8 Reserved1[8]; ///< Reserved +} CRAT_CACHE; + +/// Flags field of the CRAT TLB Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataTLB:1; ///< 1 if TLB includes translation information for data. + UINT32 InstructionTLB:1; ///< 1 if TLB includes translation information for instructions. + UINT32 CpuTLB:1; ///< 1 if TLB is part of CPU functionality + UINT32 SimdTLB:1; ///< 1 if TLB is part of SIMD functionality + UINT32 TLB4KBase256:1; ///< 1 if value in table is factored by 256 to get number of 4K entries + UINT32 :1; ///< Reserved + UINT32 TLB2MBase256:1; ///< 1 if value in table is factored by 256 to get number of 2M entries + UINT32 :1; ///< Reserved + UINT32 TLB1GBase256:1; ///< 1 if value in table is factored by 256 to get number of 1G entries + UINT32 :22; ///< Reserved +} CRAT_TLB_FLAG; + +/// CRAT TLB Affinity Structure +typedef struct { + UINT8 Type; ///< 3 - CRAT TLB Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_TLB_FLAG Flags; ///< Flags - TLB Affinity Structure. Indicates whether the TLB is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 TlbLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 DataTlbAssociativity2MB; ///< Data TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 DataTlbSize2MB; ///< Data TLB number of entries for 2MB. + UINT8 InstructionTlbAssociativity2MB; ///< Instruction TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 InstructionTlbSize2MB; ///< Instruction TLB number of entries for 2MB pages. + UINT8 DataTlbAssociativity4K; ///< Data TLB Associativity for 4KB pages + UINT8 DataTlbSize4K; ///< Data TLB number of entries for 4KB pages + UINT8 InstructionTlbAssociativity4K; ///< Instruction TLB Associativity for 4KB pages + UINT8 InstructionTlbSize4K; ///< Instruction TLB number of entries for 4KB pages + UINT8 DataTlbAssociativity1G; ///< Data TLB Associativity for 1GB pages + UINT8 DataTlbSize1G; ///< Data TLB number of entries for 1GB pages + UINT8 InstructionTlbAssociativity1G; ///< Instruction TLB Associativity for 1GB pages + UINT8 InstructionTlbSize1G; ///< Instruction TLB number of entries for 1GB pages + UINT8 Reserved1[4]; ///< Reserved +} CRAT_TLB; + +/// Flags field of the CRAT FPU Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 :31; ///< Reserved +} CRAT_FPU_FLAG; + +/// CRAT FPU Affinity Structure +typedef struct { + UINT8 Type; ///< 4 - CRAT FPU Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_FPU_FLAG Flags; ///< Flags - FPU Affinity Structure. Indicates whether the region of FPU affinity structure is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 FPUSize; ///< Product specific + UINT8 Reserved1[16]; ///< Reserved +} CRAT_FPU; + +/// Flags field of the CRAT IO Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 Coherency:1; ///< If set, IO interface supports coherent transactions (natively or through protocol extensions) + UINT32 :30; ///< Reserved +} CRAT_IO_FLAG; + +/// CRAT IO Affinity Structure +typedef struct { + UINT8 Type; ///< 5 - CRAT IO Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_IO_FLAG Flags; ///< Flags - IO Affinity Structure. Indicates whether the region of IO affinity structure is enabled and defined. + UINT32 ProximityDomainFrom; ///< Integer that represents the proximity domain to which the IO Interface belongs to + UINT32 ProximityDomainTo; ///< Integer that represents the other proximity domain to which the IO Interface belongs to + UINT8 IoType; ///< IO Interface type. Values defined are + ///< 0: Undefined + ///< 1: Hypertransport + ///< 2: PCI Express + ///< 3: Other (e.g. internal) + ///< 4-255: Reserved + UINT8 VersionMajor; ///< Major version of the Bus interface + UINT16 VersionMinor; ///< Minor version of the Bus interface ((optional) + UINT32 MinimumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MaximumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MinimumBandwidth; ///< Minimum interface Bandwidth in MB/s + UINT32 MaximumBandwidth; ///< Maximum interface Bandwidth in MB/s + UINT32 RecommendedTransferSize; ///< Recommended transfer size to reach maximum interface bandwidth in Bytes + UINT8 Reserved1[24]; ///< Reserved +} CRAT_IO; + +#define CRAT_MAX_LENGTH 0x800ul ///< Reserve 2K for CRAT +#define LOW_NODE_DEVICEID 24 +/// CRAT entry type +typedef enum { + CRAT_TYPE_HSA_PROC_UNIT = 0, ///< 0 - CRAT HSA Processing Unit Structure + CRAT_TYPE_MEMORY, ///< 1 - CRAT Memory Affinity Structure + CRAT_TYPE_CACHE, ///< 2 - CRAT Cache Affinity Structure + CRAT_TYPE_TLB, ///< 3 - CRAT TLB Affinity Structure + CRAT_TYPE_FPU, ///< 4 - CRAT FPU Affinity Structure + CRAT_TYPE_IO, ///< 5 - CRAT IO Affinity Structure +} CRAT_ENTRY_TYPE; + +/*---------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *---------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +AmdCpuLate ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +AGESA_STATUS +CreateAcpiWhea ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT VOID **WheaMcePtr, + IN OUT VOID **WheaCmcPtr + ); + +AGESA_STATUS +CreateDmiRecords ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN OUT DMI_INFO **DmiTable + ); + +AGESA_STATUS +GetType4Type7Info ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN DMI_INFO *DmiBufferPtr + ); + +VOID +DmiGetT4ProcFamilyFromBrandId ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetNameString ( + IN OUT CHAR8 *String, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +IsSourceStrContainTargetStr ( + IN OUT CHAR8 *SourceStr, + IN OUT CONST CHAR8 *TargetStr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +CreateAcpiCrat ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + OUT VOID **CratPtr + ); + +AGESA_STATUS +CreateAcpiCdit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + OUT VOID **CditPtr + ); + +VOID +ChecksumAcpiTable ( + IN OUT ACPI_TABLE_HEADER *Table, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +RunLateApTaskOnAllAPs ( + IN AP_EXE_PARAMS *ApParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdleAllAps ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT32 +InterlockedIncrement ( + IN UINT32 *Value + ); + +UINT32 +InterlockedDecrement ( + IN UINT32 *Value + ); + +#endif // _CPU_LATE_INIT_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuRegisters.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuRegisters.h new file mode 100644 index 0000000000..e51a01feb5 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/cpuRegisters.h @@ -0,0 +1,502 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309899 $ @e \$Date: 2014-12-23 02:21:13 -0600 (Tue, 23 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_REGISTERS_H_ +#define _CPU_REGISTERS_H_ + +#include "cpuFamRegisters.h" +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +#undef BIT0 +#undef BIT1 +#undef BIT2 +#undef BIT3 +#undef BIT4 +#undef BIT5 +#undef BIT6 +#undef BIT7 +#undef BIT8 +#undef BIT9 +#undef BIT10 +#undef BIT10 +#undef BIT11 +#undef BIT12 +#undef BIT13 +#undef BIT14 +#undef BIT15 +#undef BIT16 +#undef BIT17 +#undef BIT18 +#undef BIT19 +#undef BIT20 +#undef BIT21 +#undef BIT22 +#undef BIT23 +#undef BIT24 +#undef BIT25 +#undef BIT26 +#undef BIT27 +#undef BIT28 +#undef BIT29 +#undef BIT30 +#undef BIT31 +#undef BIT32 +#undef BIT33 +#undef BIT34 +#undef BIT35 +#undef BIT36 +#undef BIT37 +#undef BIT38 +#undef BIT39 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT50 +#undef BIT51 +#undef BIT52 +#undef BIT53 +#undef BIT54 +#undef BIT55 +#undef BIT56 +#undef BIT57 +#undef BIT58 +#undef BIT59 +#undef BIT60 +#undef BIT61 +#undef BIT62 +#undef BIT63 + +#define BIT0 0x0000000000000001ull +#define BIT1 0x0000000000000002ull +#define BIT2 0x0000000000000004ull +#define BIT3 0x0000000000000008ull +#define BIT4 0x0000000000000010ull +#define BIT5 0x0000000000000020ull +#define BIT6 0x0000000000000040ull +#define BIT7 0x0000000000000080ull +#define BIT8 0x0000000000000100ull +#define BIT9 0x0000000000000200ull +#define BIT10 0x0000000000000400ull +#define BIT11 0x0000000000000800ull +#define BIT12 0x0000000000001000ull +#define BIT13 0x0000000000002000ull +#define BIT14 0x0000000000004000ull +#define BIT15 0x0000000000008000ull +#define BIT16 0x0000000000010000ull +#define BIT17 0x0000000000020000ull +#define BIT18 0x0000000000040000ull +#define BIT19 0x0000000000080000ull +#define BIT20 0x0000000000100000ull +#define BIT21 0x0000000000200000ull +#define BIT22 0x0000000000400000ull +#define BIT23 0x0000000000800000ull +#define BIT24 0x0000000001000000ull +#define BIT25 0x0000000002000000ull +#define BIT26 0x0000000004000000ull +#define BIT27 0x0000000008000000ull +#define BIT28 0x0000000010000000ull +#define BIT29 0x0000000020000000ull +#define BIT30 0x0000000040000000ull +#define BIT31 0x0000000080000000ull +#define BIT32 0x0000000100000000ull +#define BIT33 0x0000000200000000ull +#define BIT34 0x0000000400000000ull +#define BIT35 0x0000000800000000ull +#define BIT36 0x0000001000000000ull +#define BIT37 0x0000002000000000ull +#define BIT38 0x0000004000000000ull +#define BIT39 0x0000008000000000ull +#define BIT40 0x0000010000000000ull +#define BIT41 0x0000020000000000ull +#define BIT42 0x0000040000000000ull +#define BIT43 0x0000080000000000ull +#define BIT44 0x0000100000000000ull +#define BIT45 0x0000200000000000ull +#define BIT46 0x0000400000000000ull +#define BIT47 0x0000800000000000ull +#define BIT48 0x0001000000000000ull +#define BIT49 0x0002000000000000ull +#define BIT50 0x0004000000000000ull +#define BIT51 0x0008000000000000ull +#define BIT52 0x0010000000000000ull +#define BIT53 0x0020000000000000ull +#define BIT54 0x0040000000000000ull +#define BIT55 0x0080000000000000ull +#define BIT56 0x0100000000000000ull +#define BIT57 0x0200000000000000ull +#define BIT58 0x0400000000000000ull +#define BIT59 0x0800000000000000ull +#define BIT60 0x1000000000000000ull +#define BIT61 0x2000000000000000ull +#define BIT62 0x4000000000000000ull +#define BIT63 0x8000000000000000ull + +/// CPUID related registers +#define AMD_CPUID_FMF 0x80000001ul // Family Model Features information +#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID +#define AMD_CPUID_L2L3Cache_L2TLB 0x80000006ul +#define CPUID_ASSOCIATIVITY_DISABLED 0x00 +#define CPUID_ASSOCIATIVITY_1_WAY 0x01 +#define CPUID_ASSOCIATIVITY_2_WAY 0x02 +#define CPUID_ASSOCIATIVITY_4_WAY 0x04 +#define CPUID_ASSOCIATIVITY_8_WAY 0x06 +#define CPUID_ASSOCIATIVITY_16_WAY 0x08 +#define CPUID_ASSOCIATIVITY_32_WAY 0x0A +#define CPUID_ASSOCIATIVITY_48_WAY 0x0B +#define CPUID_ASSOCIATIVITY_64_WAY 0x0C +#define CPUID_ASSOCIATIVITY_96_WAY 0x0D +#define CPUID_ASSOCIATIVITY_128_WAY 0x0E +#define CPUID_ASSOCIATIVITY_FULLY 0x0F +#define AMD_CPUID_TLB_L1Cache 0x80000005ul +#define AMD_CPUID_L1L2Tlb1GIdentifiers 0x80000019ul +#define AMD_CPUID_APM 0x80000007ul +#define LOCAL_APIC_ID 24 +#define LOGICAL_PROCESSOR_COUNT 16 +#define AMD_CPUID_ASIZE_PCCOUNT 0x80000008ul // Address Size, Physical Core Count + +/// CPU Logical ID Transfer +typedef struct { + UINT32 RawId; ///< RawID + UINT16 LogicalId; ///< LogicalID +} CPU_LOGICAL_ID_XLAT; + +/// Logical CPU ID Table +typedef struct { + IN UINT32 Elements; ///< Number of Elements + IN CPU_LOGICAL_ID_XLAT *LogicalIdTable; ///< CPU Logical ID Transfer table Pointer +} LOGICAL_ID_TABLE; + +// MSRs +// ------------------------ +#define MCG_CTL_P 0x00000100ul // bit 8 for MCG_CTL_P under MSRR +#define MSR_MCG_CAP 0x00000179ul +#define DBG_CTL_MSR 0x000001D9ul +#define MSR_MC0_CTL 0x00000400ul +#define MSR_MC0_STATUS 0x00000401ul +#define MSR_MC0_MISC 0x00000403ul +#define MSR_MC1_MISC 0x00000407ul +#define MSR_MC2_MISC 0x0000040Bul +#define MSR_MC4_MISC0 0x00000413ul +#define MSR_MC5_MISC 0x00000417ul +#define MSR_MC4_MISC1 0xC0000408ul +#define MSR_MC5_STATUS 0x00000415ul +#define MSR_MC6_STATUS 0x00000419ul + +#define MSR_APIC_BAR 0x0000001Bul +#define MSR_PATCH_LEVEL 0x0000008Bul + +#define CPUID_LONG_MODE_ADDR 0x80000008ul + +#define MSR_EXTENDED_FEATURE_EN 0xC0000080ul +#define MSR_MC_MISC_LINK_THRESHOLD 0xC0000408ul +#define MSR_MC_MISC_L3_THRESHOLD 0xC0000409ul +#define MSR_PATCH_LOADER 0xC0010020ul + +/// Patch Loader Register +typedef struct { + UINT64 PatchBase:32; ///< Linear address of patch header address block + UINT64 SBZ:32; ///< Should be zero +} PATCH_LOADER_MSR; + +#define AMD_MTRR_VARIABLE_BASE0 0x200 +#define AMD_MTRR_VARIABLE_BASE6 0x20C +#define AMD_MTRR_FIX64k_00000 0x250 +#define AMD_MTRR_FIX16k_80000 0x258 +#define AMD_MTRR_FIX16k_A0000 0x259 +#define AMD_MTRR_FIX4k_C0000 0x268 +#define AMD_MTRR_FIX4k_C8000 0x269 +#define AMD_MTRR_FIX4k_D0000 0x26A +#define AMD_MTRR_FIX4k_D8000 0x26B +#define AMD_MTRR_FIX4k_E0000 0x26C +#define AMD_MTRR_FIX4k_E8000 0x26D +#define AMD_MTRR_FIX4k_F0000 0x26E +#define AMD_MTRR_FIX4k_F8000 0x26F + +#define AMD_MTRR_FIX64K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX64K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX64K_UC_DRAM 0x1818181818181818ull +#define AMD_MTRR_FIX16K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX16K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX16K_UC_DRAM 0x1818181818181818ull +#define AMD_MTRR_FIX4K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX4K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX4K_UC_DRAM 0x1818181818181818ull + + +#define MSR_SYS_CFG 0xC0010010ul // SYSCFG +#define MSR_TOM 0xC001001Aul // TOP_MEM +#define MSR_TOM2 0xC001001Dul // TOP_MEM2 +#define MSR_MC0_CTL_MASK 0xC0010044ul // MC0 Control Mask +#define MSR_MC1_CTL_MASK 0xC0010045ul // MC1 Control Mask +#define MSR_MC2_CTL_MASK 0xC0010046ul // MC2 Control Mask +#define MSR_MC4_CTL_MASK 0xC0010048ul // MC4 Control Mask + +#define MSR_CPUID_FEATS 0xC0011004ul // CPUID Features +#define MSR_CPUID_EXT_FEATS 0xC0011005ul // CPUID Extended Features +#define MSR_HDT_CFG 0xC001100Aul +#define MSR_HWCR 0xC0010015ul +#define MSR_NB_CFG 0xC001001Ful // NB Config +#define MSR_HTC 0xC001003Eul +#define CPU_WDT_CFG 0xC0010074ul +#define ENABLE_CF8_EXT_CFG 0x00004000ul // [46] +#define INIT_APIC_CPUID_LO 0x00400000ul // [54] +#define MSR_CU_SPMCTL 0xC0010281ul +#define MSR_LS_CFG 0xC0011020ul +#define MSR_IC_CFG 0xC0011021ul // ICache Config - F15 Shared +#define MSR_DC_CFG 0xC0011022ul +#define MSR_ME_CFG 0xC0011029ul +#define MSR_BU_CFG 0xC0011023ul +#define MSR_CU_CFG 0xC0011023ul // F15 Shared +#define MSR_DE_CFG 0xC0011029ul // F15 Shared +#define MSR_BU_CFG2 0xC001102Aul +#define MSR_CU_CFG2 0xC001102Aul // F15 Shared +#define MSR_BU_CFG3 0xC001102Bul +#define MSR_CU_CFG3 0xC001102Bul // F15 Shared +#define MSR_LS_CFG2 0xC001102Dul +#define MSR_CU_PFTCFG 0xC001102Ful +#define MSR_IBS_OP_DATA3 0xC0011037ul +#define MSR_C001_1070 0xC0011070ul // F15 Shared +#define MSR_CU_CBBCFG 0xC00110A1ul // F15 CZ + + +#define MSR_CPUID_NAME_STRING0 0xC0010030ul // First CPUID namestring register +#define MSR_CPUID_NAME_STRING1 0xC0010031ul +#define MSR_CPUID_NAME_STRING2 0XC0010032ul +#define MSR_CPUID_NAME_STRING3 0xC0010033ul +#define MSR_CPUID_NAME_STRING4 0xC0010034ul +#define MSR_CPUID_NAME_STRING5 0xC0010035ul // Last CPUID namestring register +#define MSR_MMIO_Cfg_Base 0xC0010058ul // MMIO Configuration Base Address Register +#define MSR_BIST 0xC0010060ul // BIST Results register +#define MSR_OSVW_ID_Length 0xC0010140ul +#define MSR_OSVW_Status 0xC0010141ul +#define MSR_NB_PERF_CTL0 0xC0010240ul +#define MSR_NB_PERF_CTR0 0xC0010241ul +#define MSR_NB_PERF_CTL1 0xC0010242ul +#define MSR_NB_PERF_CTR1 0xC0010243ul +#define MSR_NB_PERF_CTL2 0xC0010244ul +#define MSR_NB_PERF_CTR2 0xC0010245ul +#define MSR_NB_PERF_CTL3 0xC0010246ul +#define MSR_NB_PERF_CTR3 0xC0010247ul +#define CU_SPMCTL 0xC0010281ul // Streaming Performance Monitor Control +#define MSR_PERF_CONTROL3 0xC0010003ul // Performance control register number 3 +#define MSR_PERF_COUNTER3 0xC0010007ul // Performance counter register number 3 +#define PERF_RESERVE_BIT_MASK 0x030FFFDFFFFFull // Mask of the Performance control Reserve bits +#define PERF_CAR_CORRUPTION_EVENT 0x040040F0E2ul // Configure the controller to capture the + // CAR Corruption +// FUNC_0 registers +// ---------------- +#define LINK_INIT_CTRL 0x6C +#define LINK_INIT_CTRL_REQ_DIS 0x02 // [1] = ReqDis +#define LINK_INIT_COLD_RST_DET BIT4 +#define LINK_INIT_BIOS_RST_DET_0 BIT5 +#define LINK_INIT_BIOS_RST_DET_1 BIT9 +#define LINK_INIT_BIOS_RST_DET_2 BIT10 +#define LINK_INIT_BIOS_RST_DET BIT9 | BIT10 +#define EXTENDED_NODE_ID 0x160 + +#define CORE_CTRL 0x1DC +#define CORE_CTRL_CORE1_EN 0x00000002ul +#define CORE_CTRL_CORE2_EN 0x00000004ul +#define CORE_CTRL_CORE3_EN 0x00000008ul +#define CORE_CTRL_CORE4_EN 0x00000010ul +#define CORE_CTRL_CORE5_EN 0x00000020ul +#define CORE_CTRL_CORE6_EN 0x00000040ul +#define CORE_CTRL_CORE7_EN 0x00000080ul +#define CORE_CTRL_CORE8_EN 0x00000100ul +#define CORE_CTRL_CORE9_EN 0x00000200ul + +// FUNC_3 registers +// ---------------- +#define HARDWARE_THERMAL_CTRL_REG 0x64 +#define SOFTWARE_THERMAL_CTRL_REG 0x68 + +#define ACPI_PSC_0_REG 0x80 // ACPI Power State Control Registers +#define ACPI_PSC_4_REG 0x84 + +#define NB_CFG_HIGH_REG 0x8C +#define POWER_CTRL_MISCELLANEOUS_REG 0xA0 +#define CLOCK_POWER_TIMING_CTRL2_REG 0xDC +#define NORTH_BRIDGE_CAPABILITIES_REG 0xE8 +#define MULTI_NODE_CPU 29 +#define CPUID_FMR 0xFC // Family / Model registers +#define DOWNCORE_CTRL 0x190 // Downcore Control Register + +#define LINK_TO_XCS_TOKEN_COUNT_REG_3X148 0x148 +#define REG_HT4_PHY_OFFSET_BASE_4X180 0x180 +#define REG_HT4_PHY_DATA_PORT_BASE_4X184 0x184 + +// FUNC_4 registers +// ---------------- +/* Native Die CPUID Register F4x160 */ +#define NATIVE_DIE_CPUID_REG 0x160 +#define NATIVE_DIE_CPUID_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, NATIVE_DIE_CPUID_REG)) + +/// Native Die CPUID PCI Register +typedef struct { + UINT32 Stepping:4; ///< Stepping + UINT32 BaseModel:4; ///< Base Model + UINT32 BaseFamily:4; ///< Base Family + UINT32 :4; ///< Reserved + UINT32 ExtModel:4; ///< Extended Model + UINT32 ExtFamily:8; ///< Extended Family + UINT32 :4; ///< Reserved +} NATIVE_DIE_CPUID_REGISTER; + +// FUNC_5 registers +// ---------------- +#define COMPUTE_UNIT_STATUS 0x80 +#define NORTH_BRIDGE_CAPABILITIES_2_REG 0x84 + + +// Misc. defines. +#define PCI_DEV_BASE 24 + +#define CPUID_STEPPING_MASK 0x0000000Ful +#define CPUID_BASE_MODEL_MASK 0x000000F0ul +#define CPUID_BASE_FAMILY_MASK 0x00000F00ul +#define CPUID_EXT_MODEL_MASK 0x000F0000ul +#define CPUID_EXT_FAMILY_MASK 0x0FF00000ul + +#define CZ_SOCKET_FP4 0 +#define SOCKET_IGNORE 0xF + +#define LAPIC_BASE_ADDR_MASK 0x0000FFFFFFFFF000ull +#define APIC_EXT_BRDCST_MASK 0x000E0000ul +#define APIC_ENABLE_BIT 0x00000800ul +#ifndef LOCAL_APIC_ADDR +#define LOCAL_APIC_ADDR 0xFEE00000ul +#endif +#define INT_CMD_REG_LO 0x300 +#define INT_CMD_REG_HI 0x310 +#define REMOTE_MSG_REG 0x380 +#define REMOTE_READ_REG 0xC0 +#define APIC_ID_REG 0x20 +#define APIC20_ApicId 24 +#define CMD_REG_TO_READ_DATA 0x338 + +#define MAX_CORE_ID_SIZE 8 +#define MAX_CORE_ID_MASK ((1 << MAX_CORE_ID_SIZE) - 1) + +/*------------------------- + * Default definitions + *------------------------- + */ +#define DOWNCORE_MASK_SINGLE 0xFFFFFFFEul +#define DOWNCORE_MASK_DUAL 0xFFFFFFFCul +#define DOWNCORE_MASK_TRI 0xFFFFFFF8ul +#define DOWNCORE_MASK_FOUR 0xFFFFFFF0ul +#define DOWNCORE_MASK_FIVE 0xFFFFFFE0ul +#define DOWNCORE_MASK_SIX 0xFFFFFFC0ul +#define DOWNCORE_MASK_SEVEN 0xFFFFFF80ul +#define DOWNCORE_MASK_EIGHT 0xFFFFFF00ul +#define DOWNCORE_MASK_TEN 0xFFFFFC00ul +#define DOWNCORE_MASK_TWELVE 0xFFFFF000ul +#define DOWNCORE_MASK_FOURTEEN 0xFFFFC000ul +#define DOWNCORE_MASK_DUAL_COMPUTE_UNIT 0xFFFFFFFAul +#define DOWNCORE_MASK_TRI_COMPUTE_UNIT 0xFFFFFFEAul +#define DOWNCORE_MASK_FOUR_COMPUTE_UNIT 0xFFFFFFAAul +#define DOWNCORE_MASK_FIVE_COMPUTE_UNIT 0xFFFFFEAAul +#define DOWNCORE_MASK_SIX_COMPUTE_UNIT 0xFFFFFAAAul +#define DOWNCORE_MASK_SEVEN_COMPUTE_UNIT 0xFFFFEAAAul +#define DOWNCORE_MASK_EIGHT_COMPUTE_UNIT 0xFFFFAAAAul + +#define DELIVERY_STATUS BIT13 +#define REMOTE_READ_STAT_MASK 0x00030000ul +#define REMOTE_DELIVERY_PENDING 0x00010000ul +#define REMOTE_DELIVERY_DONE 0x00020000ul + +/* + * -------------------------------------------------------------------------------------- + * + * D E F I N E S / T Y P E D E F S / S T R U C T U R E S + * + * -------------------------------------------------------------------------------------- + */ + +/// CpuEarly param type +typedef struct { + IN UINT8 MemInitPState; ///< Pstate value during memory initial + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Runtime configurable user options +} AMD_CPU_EARLY_PARAMS; + +/// CPUID +typedef enum { + REG_EAX, ///< EAX + REG_EBX, ///< EBX + REG_ECX, ///< ECX + REG_EDX ///< EDX +} CPUID_REG; + +#endif // _CPU_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/CPU/heapManager.h b/src/vendorcode/amd/pi/00660F01/Proc/CPU/heapManager.h new file mode 100644 index 0000000000..915144f8f9 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/CPU/heapManager.h @@ -0,0 +1,241 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Heap Manager and Heap Allocation APIs, and related functions. + * + * Contains code that initialize, maintain, and allocate the heap space. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _HEAP_MANAGER_H_ +#define _HEAP_MANAGER_H_ + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +#define AMD_MTRR_VARIABLE_BASE0 0x200 +#define AMD_MTRR_VARIABLE_HEAP_BASE 0x20A +#define AMD_MTRR_VARIABLE_HEAP_MASK (AMD_MTRR_VARIABLE_HEAP_BASE + 1) + +#define AMD_HEAP_START_ADDRESS 0x400000ul +#define AMD_HEAP_REGION_END_ADDRESS 0xBFFFFFul +#define AMD_HEAP_SIZE_PER_CORE 0x010000ul +#define AMD_HEAP_INVALID_HEAP_OFFSET 0xFFFFFFFFul +#define AMD_HEAP_MTRR_MASK ((0xFFFFFFFFFFFFF800ull & (((UINT64)AMD_HEAP_SIZE_PER_CORE ^ (-1)) + 1)) | 0x800) +#define AMD_HEAP_SIZE_DWORD_PER_CORE (AMD_HEAP_SIZE_PER_CORE / 4) + +#define AMD_TEMP_TOM 0x20000000ul // Set TOM to 512 MB (temporary value) +#define AMD_VAR_MTRR_ENABLE_BIT 0x100000ul // bit 20 + +#define AMD_HEAP_RAM_ADDRESS 0xB0000ul + +#define HEAP_SIGNATURE_VALID 0x50414548ul // Signature: 'HEAP' +#define HEAP_SIGNATURE_INVALID 0x00000000ul // Signature cleared + +///Heap Manager Life cycle +#define HEAP_DO_NOT_EXIST_YET 1 +#define HEAP_LOCAL_CACHE 2 +#define HEAP_TEMP_MEM 3 +#define HEAP_SYSTEM_MEM 4 +#define HEAP_DO_NOT_EXIST_ANYMORE 5 +#define HEAP_S3_RESUME 6 +#define HEAP_RUNTIME_SYSTEM_MEM 7 + +///Heap callout +#define HEAP_CALLOUT_BOOTTIME 0 +#define HEAP_CALLOUT_RUNTIME 1 + +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +/// Allocate Heap Parameters +typedef struct _ALLOCATE_HEAP_PARAMS { + UINT32 RequestedBufferSize; ///< Size of buffer. + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 *BufferPtr; ///< Pointer to buffer. +} ALLOCATE_HEAP_PARAMS; + +/// Locate Heap Parameters +typedef struct _LOCATE_HEAP_PTR { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Data buffer size. + UINT8 *BufferPtr; ///< Pointer to buffer. +} LOCATE_HEAP_PTR; + +/// Heap Node Header +typedef struct _BUFFER_NODE { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Size of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 PadSize; ///< Size of pad. + UINT32 OffsetOfNextNode; ///< Offset of next node (relative to the base). +} BUFFER_NODE; + +/// Heap Manager +typedef struct _HEAP_MANAGER { + UINT32 Signature; ///< a signature to indicate if the heap is valid. + UINT32 UsedSize; ///< Used size of heap. + UINT32 FirstActiveBufferOffset; ///< Offset of the first active buffer. + UINT32 FirstFreeSpaceOffset; ///< Offset of the first free space. +} HEAP_MANAGER; + +/// AGESA Buffer Handles (These are reserved) +typedef enum { + AMD_INIT_RESET_HANDLE = 0x000A000, ///< Assign 0x000A000 buffer handle to AmdInitReset routine. + AMD_INIT_EARLY_HANDLE, ///< Assign 0x000A001 buffer handle to AmdInitEarly routine. + AMD_INIT_POST_HANDLE, ///< Assign 0x000A002 buffer handle to AmdInitPost routine. + AMD_INIT_ENV_HANDLE, ///< Assign 0x000A003 buffer handle to AmdInitEnv routine. + AMD_INIT_MID_HANDLE, ///< Assign 0x000A004 buffer handle to AmdInitMid routine. + AMD_INIT_LATE_HANDLE, ///< Assign 0x000A005 buffer handle to AmdInitLate routine. + AMD_INIT_RESUME_HANDLE, ///< Assign 0x000A006 buffer handle to AmdInitResume routine. + AMD_LATE_RUN_AP_TASK_HANDLE, ///< Assign 0x000A007 buffer handle to AmdLateRunApTask routine. + AMD_INIT_RTB_HANDLE, ///< Assign 0x000A008 buffer handle to AmdInitRtb routine. + AMD_S3_LATE_RESTORE_HANDLE, ///< Assign 0x000A009 buffer handle to AmdS3LateRestore routine. + AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, ///< Assign 0x000A00A buffer handle to be used for S3 save table + AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, ///< Assign 0x000A00B buffer handle to be used for S3 save table + AMD_CPU_AP_TASKING_HANDLE, ///< Assign 0x000A00C buffer handle to AP tasking input parameters. + AMD_REC_MEM_SOCKET_HANDLE, ///< Assign 0x000A00D buffer handle to save socket with memory in memory recovery mode. + AMD_MEM_AUTO_HANDLE, ///< Assign 0x000A00E buffer handle to AmdMemAuto routine. + AMD_MEM_SPD_HANDLE, ///< Assign 0x000A00F buffer handle to AmdMemSpd routine. + AMD_MEM_DATA_HANDLE, ///< Assign 0x000A010 buffer handle to MemData + AMD_MEM_TRAIN_BUFFER_HANDLE, ///< Assign 0x000A011 buffer handle to allocate buffer for training + AMD_MEM_S3_DATA_HANDLE, ///< Assign 0x000A012 buffer handle to special case register for S3 + AMD_MEM_S3_NB_HANDLE, ///< Assign 0x000A013 buffer handle to NB block for S3 + AMD_MEM_S3_MR0_DATA_HANDLE, ///< Assign 0x000A014 buffer handle to MR0 data block for S3 + AMD_UMA_INFO_HANDLE, ///< Assign 0x000A015 buffer handle to be used for Uma information + AMD_DMI_MEM_DEV_INFO_HANDLE, ///< Assign 0x000A016 buffer handle to DMI Type16 17 19 20 information + EVENT_LOG_BUFFER_HANDLE, ///< Assign 0x000A017 buffer handle to Event Log + IDS_CONTROL_HANDLE, ///< Assign 0x000A018 buffer handle to AmdIds routine. + IDS_HDT_OUT_BUFFER_HANDLE, ///< Assign 0x000A019 buffer handle to be used for HDTOUT support. + IDS_CHECK_POINT_PERF_HANDLE, ///< Assign 0x000A01A buffer handle to Performance analysis + AMD_PCIE_COMPLEX_DATA_HANDLE, ///< Assign 0x000A01B buffer handle to be used for PCIe support + AMD_MEM_SYS_DATA_HANDLE, ///< Assign 0x000A01C buffer handle to be used for memory data structure + AMD_GNB_SMU_CONFIG_HANDLE, ///< Assign 0x000A01D buffer handle to be used for GNB SMU configuration + AMD_PP_FUSE_TABLE_HANDLE, ///< Assign 0x000A01E buffer handle to be used for TT fuse table + AMD_GFX_PLATFORM_CONFIG_HANDLE, ///< Assign 0x000A01F buffer handle to be used for Gfx platform configuration + AMD_GNB_TEMP_DATA_HANDLE, ///< Assign 0x000A020 buffer handle for GNB general purpose data block + AMD_MEM_2D_RDQS_HANDLE, ///< Assign 0x000A021 buffer handle for 2D training + AMD_MEM_2D_RD_WR_HANDLE, ///< Assign 0x000A022 buffer handle for 2D Read/Write training + AMD_GNB_IOMMU_SCRATCH_MEM_HANDLE, ///< Assign 0x000A023 buffer handle to be used for GNB IOMMU scratch memory + AMD_MEM_S3_SAVE_HANDLE, ///< Assign 0x000A024 buffer handle for memory data saved right after memory init + AMD_MEM_2D_RDQS_RIM_HANDLE, ///< Assign 0x000A025 buffer handle for 2D training Eye RIM Search + AMD_MEM_2D_RD_WR_RIM_HANDLE, ///< Assign 0x000A026 buffer handle for 2D Read/Write training Eye RIM Search + AMD_CPU_NB_PSTATE_FIXUP_HANDLE, ///< Assign 0x000A027 buffer handle for an NB P-state workaround + AMD_MEM_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000A028 buffer handle for CRAT Memory affinity component structure + AMD_SKIP_MEM_S3_SAVE, ///< Assign 0x000A029 buffer handle for the flag to skip memory S3 save + AMD_IS_FEATURE_ENABLED, ///< Assign 0x000A02A buffer handle for keeping the result of IsFeatureEnabled + AMD_MEM_DATAEYE_WORK_AREA_HANDLE, ///< Assign 0x000A02B buffer handle for Composite Data Eye Compression Work Area + AMD_GNB_SAMU_PATCH_HANDLE, ///< Assign 0x000A02C buffer handle for Samu patch buffer + AMD_GNB_SAMU_BOOT_CONTROL_HANDLE, ///< Assign 0x000A02D buffer handle for Samu boot control buffer + AMD_GNB_ACP_ENGINE_HANDLE, ///< Assign 0x000A02E buffer handle for GNB ACP engine buffer + AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE, ///< Assign 0x000A02F buffer handle for PMU SRAM Message Block buffer + AMD_MEM_DRAM_CAD_BUS_CONFIG_HANDLE, ///< Assign 0x000A030 buffer handle for DRAM CAD Bus Configuration + AMD_GNB_SMU_TABLE_HANDLE, ///< Assign 0x000A031 buffer handle for GNB SMU table buffer + AMD_GNB_CRAT_HSA_TABLE_HANDLE, ///< Assign 0x000A032 buffer handle for GNB CRAT HSA unit table + AMD_GNB_BUILD_OPTIONS_HANDLE, ///< Assign 0x000A033 buffer handle for GNB build options + AMD_S3_FINAL_RESTORE_HANDLE, ///< Assign 0x000A034 buffer handle to AmdS3FinalRestore routine. + AMD_GNB_PCIE_AER_CONFIG_HANDLE, ///< Assign 0x000A035 buffer handle for GNB PCIE AER configuration. + AMD_BTC_SCRATCH_HANDLE, ///< Assign 0x000A036 buffer handle for boot time calibration workloads + AMD_BTC_XMM_SAVE_HANDLE, ///< Assign 0x000A037 buffer handle for boot time calibration xmm register save + AMD_S3_SAVE_HANDLE, ///< Assign 0x000A038 buffer handle to memory context data + AMD_MEM_DDR_MAX_RATE_HANDLE, ///< Assign 0x000A039 buffer handle to memory DDR max rate + AMD_GNB_TDP_HANDLE, ///< Assign 0x000A03A buffer handle to GNB TDP + AMD_MEM_MISC_HANDLES_START = 0x1000000, ///< Reserve 0x1000000 to 0x1FFFFFF buffer handle + AMD_MEM_MISC_HANDLES_END = 0x1FFFFFF, ///< miscellaneous memory init tasks' buffers. + AMD_HEAP_IN_MAIN_MEMORY_HANDLE = 0x8000000, ///< Assign 0x8000000 to AMD_HEAP_IN_MAIN_MEMORY_HANDLE. + SOCKET_DIE_MAP_HANDLE = 0x534F4B54, ///< 'sokt' + NODE_ID_MAP_HANDLE = 0x4E4F4445, ///< 'node' + HOP_COUNT_TABLE_HANDLE = 0x484F5053, ///< 'hops' + AMD_FCH_RESET_DATA_BLOCK_HANDLE = 0x46434852, ///< 'FCHR' Buffer handle for FCH private data block at InitReset + AMD_FCH_DATA_BLOCK_HANDLE = 0x46434845, ///< 'FCHE' Buffer handle for FCH private data block at InitEnv + IDS_TRAP_TABLE_HANDLE = 0x49524547, ///< 'IREG' Handle for IDS register table + IDS_SAVE_IDTR_HANDLE = 0x49445452, ///< 'IDTR' + IDS_BSC_IDT_HANDLE = 0x42534349, ///< 'BSCI' BSC Idt table + IDS_NV_TO_CMOS_HANDLE = 0x534D4349, ///< 'ICMS' Handle for IDS CMOS save + IDS_GRA_HANDLE = 0x41524749, ///< 'IGRA' Handle for IDS GRA save + IDS_EXTEND_HANDLE = 0x54584549, ///< 'IEXT' Handle for IDS extend module + IDS_TEMP_DATA_HANDLE = 0x504D5459, ///< 'ITMP' Handle for IDS temp data +} AGESA_BUFFER_HANDLE; + + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +HeapManagerInit ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT ALLOCATE_HEAP_PARAMS *AllocateHeapParams, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapLocateBuffer ( + IN OUT LOCATE_HEAP_PTR *LocateHeap, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT64 +HeapGetBaseAddress ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +EventLogInitialization ( + IN AMD_CONFIG_PARAMS *StdHeader + ); +#endif // _HEAP_MANAGER_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Common/AmdFch.h b/src/vendorcode/amd/pi/00660F01/Proc/Common/AmdFch.h new file mode 100644 index 0000000000..f75f881601 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Common/AmdFch.h @@ -0,0 +1,63 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD FCH Component + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _AMD_FCH_H_ +#define _AMD_FCH_H_ + +typedef AGESA_STATUS FCH_INIT (IN VOID *DataPtr); +typedef VOID FCH_TASK_ENTRY (IN VOID *FchCfg); + + +/// FCH API build options +typedef struct { + FCH_INIT *InitReset; ///< InitReset + FCH_INIT *InitResetConstructor; ///< InitResetConstructor + FCH_INIT *InitEnv; ///< InitEnv + FCH_INIT *InitEnvConstructor; ///< InitEnvConstructor + FCH_INIT *InitMid; ///< InitMid + FCH_INIT *InitMidConstructor; ///< InitMidConstructor + FCH_INIT *InitLate; ///< InitLate + FCH_INIT *InitLateConstructor; ///< InitLateConstructor +} BLDOPT_FCH_FUNCTION; + +#endif diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/AcpiLib.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/AcpiLib.h new file mode 100644 index 0000000000..6f87842a30 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/AcpiLib.h @@ -0,0 +1,90 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH ACPI lib + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FCH_ACPILIB_H_ +#define _FCH_ACPILIB_H_ +/// +/// RSDP - ACPI 2.0 table RSDP +/// +typedef struct _RSDP_HEADER { + UINT64 Signature; ///< RSDP signature "RSD PTR" + UINT8 CheckSum; ///< checksum of the first 20 bytes + UINT8 OEMID[6]; ///< OEM ID + UINT8 Revision; ///< 0 for APCI 1.0, 2 for ACPI 2.0 + UINT32 RsdtAddress; ///< physical address of RSDT + UINT32 Length; ///< total length of RSDP (including extended part) + UINT64 XsdtAddress; ///< physical address of XSDT + UINT8 ExtendedCheckSum; ///< chechsum of whole table + UINT8 Reserved[3]; ///< Reserved +} RSDP_HEADER; + +/// +/// DESCRIPTION_HEADER - ACPI common table header +/// +typedef struct _DESCRIPTION_HEADER { + UINT32 Signature; ///< ACPI signature (4 ASCII characters) + UINT32 Length; ///< Length of table, in bytes, including header + UINT8 Revision; ///< ACPI Specification minor version # + UINT8 CheckSum; ///< To make sum of entire table == 0 + UINT8 OemId[6]; ///< OEM identification + UINT8 OemTableId[8]; ///< OEM table identification + UINT32 OemRevision; ///< OEM revision number + UINT32 CreatorId; ///< ASL compiler vendor ID + UINT32 CreatorRevision; ///< ASL compiler revision number +} DESCRIPTION_HEADER; + +/// +/// _AcpiRegWrite - ACPI MMIO register R/W structure +/// +typedef struct _ACPI_REG_WRITE { + UINT8 MmioBase; /// MmioBase: Index of Fch block (For instance GPIO_BASE:0x01 SMI_BASE:0x02) + UINT8 MmioReg; /// MmioReg : Register index + UINT8 DataAndMask; /// DataANDMask : AND Register Data + UINT8 DataOrMask; /// DataOrMask : Or Register Data +} ACPI_REG_WRITE; + +VOID* AcpiLocateTable (IN UINT32 Signature); +VOID AcpiSetTableCheckSum (IN VOID *TablePtr); +UINT8 AcpiGetTableCheckSum (IN VOID *TablePtr); +UINT8 GetByteSum (IN VOID *DataPtr, IN UINT32 Length); + +#endif diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchBiosRamUsage.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchBiosRamUsage.h new file mode 100644 index 0000000000..a694d11543 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchBiosRamUsage.h @@ -0,0 +1,66 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH BIOS Ram usage + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FCH_BIOS_RAM_USAGE_H_ +#define _FCH_BIOS_RAM_USAGE_H_ + +#define RESTORE_MEMORY_CONTROLLER_START 0 +#define XHCI_REGISTER_BAR00 0xD0 +#define XHCI_REGISTER_BAR01 0xD1 +#define XHCI_REGISTER_BAR02 0xD2 +#define XHCI_REGISTER_BAR03 0xD3 +#define XHCI_REGISTER_04H 0xD4 +#define XHCI_REGISTER_0CH 0xD5 +#define XHCI_REGISTER_3CH 0xD6 +#define XHCI1_REGISTER_BAR00 0xE0 +#define XHCI1_REGISTER_BAR01 0xE1 +#define XHCI1_REGISTER_BAR02 0xE2 +#define XHCI1_REGISTER_BAR03 0xE3 +#define XHCI1_REGISTER_04H 0xE4 +#define XHCI1_REGISTER_0CH 0xE5 +#define XHCI1_REGISTER_3CH 0xE6 +#define RTC_WORKAROUND_DATA_START 0xF0 +#define BOOT_TIME_FLAG_SEC 0xF8 +#define BOOT_TIME_FLAG_INT19 0xFC + +#endif + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchCommonCfg.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchCommonCfg.h new file mode 100644 index 0000000000..fb2bae22a0 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchCommonCfg.h @@ -0,0 +1,1359 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH Function Support Definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 311507 $ @e \$Date: 2015-01-22 06:57:51 +0800 (Thu, 22 Jan 2015) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FCH_COMMON_CFG_H_ +#define _FCH_COMMON_CFG_H_ + +#pragma pack (push, 1) + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +//----------------------------------------------------------------------------- + +// +// FCH Component Data Structure Definitions +// + +/// PCI_ADDRESS - PCI access structure +#define PCI_ADDRESS(bus, dev, func, reg) \ + (UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +#define CPUID_FMF 0x80000001ul // Family Model Features information +/// +/// - Byte Register R/W structure +/// +typedef struct _REG8_MASK { + UINT8 RegIndex; /// RegIndex - Reserved + UINT8 AndMask; /// AndMask - Reserved + UINT8 OrMask; /// OrMask - Reserved +} REG8_MASK; + + +/// +/// PCIE Reset Block +/// +typedef enum { + NbBlock, ///< Reset for NB PCIE + FchBlock ///< Reset for FCH GPP +} RESET_BLOCK; + +/// +/// PCIE Reset Operation +/// +typedef enum { + DeassertReset, ///< DeassertRese - Deassert reset + AssertReset ///< AssertReset - Assert reset +} RESET_OP; + + +/// +/// Fch Run Time Parameters +/// +typedef struct { + UINT32 PcieMmioBase; ///< PcieMmioBase + UINT32 FchDeviceEnableMap; ///< FchDeviceEnableMap + UINT32 FchDeviceD3ColdMap; ///< FchDeviceD3ColdMap + UINT16 XHCI_PMx04_XhciFwRomAddr_Rom; ///< XHCI_PMx04_XhciFwRomAddr_Rom + UINT32 XHCI_PMx08_xHCI_Firmware_Addr_1_Rom; ///< XHCI_PMx08_xHCI_Firmware_Addr_1_Ram + UINT16 XHCI_PMx04_XhciFwRomAddr_Ram; ///< XHCI_PMx04_XhciFwRomAddr_Rom + UINT32 XHCI_PMx08_xHCI_Firmware_Addr_1_Ram; ///< XHCI_PMx08_xHCI_Firmware_Addr_1_Ram + UINT8 SataDevSlpPort0S5Pin; ///< SataDevSlpPort0S5Pin - Reserved + UINT8 SataDevSlpPort1S5Pin; ///< SataDevSlpPort1S5Pin - Reserved + UINT16 Dummy16; ///< Dummy16 - Reserved + UINT32 SdMmioBase; ///< Sd Mmio Base - Reserved + UINT32 EhciMmioBase; ///< Ehci Mmio Base - Reserved + UINT32 XhciMmioBase; ///< Xhci Mmio Base - Reserved + UINT32 SataMmioBase; ///< Sata Mmio Base - Reserved +} FCH_RUNTIME; + +/// +/// SD structure +/// +typedef struct { + SD_MODE SdConfig; ///< SD Mode configuration + /// @li <b>00</b> - Disabled + /// @li <b>00</b> - AMDA + /// @li <b>01</b> - DMA + /// @li <b>10</b> - PIO + /// + UINT8 SdSpeed; ///< SD Speed + /// @li <b>0</b> - Low speed + /// @li <b>1</b> - High speed + /// + UINT8 SdBitWidth; ///< SD Bit Width + /// @li <b>0</b> - 32BIT clear 23 + /// @li <b>1</b> - 64BIT, set 23,default + /// + UINT32 SdSsid; ///< SD Subsystem ID + SD_CLOCK_CONTROL SdClockControl; ///< SD Clock Control + BOOLEAN SdClockMultiplier; ///< SD Clock Multiplier enable/disable + UINT8 SdReTuningMode; ///< SD Re-tuning modes select + /// @li <b>0</b> - mode 1 + /// @li <b>1</b> - mode 2 + /// @li <b>2</b> - mode 3 + UINT8 SdHostControllerVersion; ///< SD controller Version + /// @li <b>1</b> - SD 2.0 + /// @li <b>2</b> - SD 3.0 + UINT8 SdrCapabilities; ///< SDR Capability mode select + /// @li <b>00</b> - SDR25/15 + /// @li <b>01</b> - SDR50 + /// @li <b>11</b> - SDR104 + UINT8 SdSlotType; ///< SDR Slot Type select + /// @li <b>00</b> - Removable Card Slot + /// @li <b>01</b> - Embedded Slot for One Device + /// @li <b>10</b> - Shared Bus Slot + BOOLEAN SdForce18; ///< SD Force18 + UINT8 SdDbgConfig; ///< SD Mode configuration + /// @li <b>00</b> - Disabled + /// @li <b>00</b> - AMDA + /// @li <b>01</b> - DMA + /// @li <b>10</b> - PIO + /// +} FCH_SD; + +/// +/// CODEC_ENTRY - Fch HD Audio OEM Codec structure +/// +typedef struct _CODEC_ENTRY { + UINT8 Nid; /// Nid - Reserved + UINT32 Byte40; /// Byte40 - Reserved +} CODEC_ENTRY; + +/// +/// CODEC_TBL_LIST - Fch HD Audio Codec table list +/// +typedef struct _CODEC_TBL_LIST { + UINT32 CodecId; /// CodecID - Codec ID + CODEC_ENTRY* CodecTablePtr; /// CodecTablePtr - Codec table pointer +} CODEC_TBL_LIST; + +/// +/// AZALIA_PIN - HID Azalia or GPIO define structure. +/// +typedef struct _AZALIA_PIN { + UINT8 AzaliaSdin0; ///< AzaliaSdin0 + /// @par + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin1; ///< AzaliaSdin1 + /// @par + /// SDIN1 is define at BIT2 & BIT3 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin2; ///< AzaliaSdin2 + /// @par + /// SDIN2 is define at BIT4 & BIT5 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin3; ///< AzaliaSdin3 + /// @par + /// SDIN3 is define at BIT6 & BIT7 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin +} AZALIA_PIN; + +/// +/// Azalia structure +/// +typedef struct { + HDA_CONFIG AzaliaEnable; ///< AzaliaEnable - Azalia function configuration + BOOLEAN AzaliaMsiEnable; ///< AzaliaMsiEnable - Azalia MSI capability + UINT32 AzaliaSsid; ///< AzaliaSsid - Azalia Subsystem ID + UINT8 AzaliaPinCfg; ///< AzaliaPinCfg - Azalia Controller SDIN pin Configuration + /// @par + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaFrontPanel; ///< AzaliaFrontPanel - Azalia Controller Front Panel Configuration + /// @par + /// Support Front Panel configuration + /// @li <b>0</b> - Auto + /// @li <b>1</b> - disable + /// @li <b>2</b> - enable + + UINT8 FrontPanelDetected; ///< FrontPanelDetected - Force Azalia Controller Front Panel Configuration + /// @par + /// Force Front Panel configuration + /// @li <b>0</b> - Not Detected + /// @li <b>1</b> - Detected + + UINT8 AzaliaSnoop; ///< AzaliaSnoop - Azalia Controller Snoop feature Configuration + /// @par + /// Azalia Controller Snoop feature Configuration + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaDummy; /// AzaliaDummy - Reserved */ + + AZALIA_PIN AzaliaConfig; /// AzaliaConfig - Azaliz Pin Configuration + +/// +/// AZOEMTBL - Azalia Controller OEM Codec Table Pointer +/// + CODEC_TBL_LIST *AzaliaOemCodecTablePtr; /// AzaliaOemCodecTablePtr - Oem Azalia Codec Table Pointer + +/// +/// AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer +/// + VOID *AzaliaOemFpCodecTablePtr; /// AzaliaOemFpCodecTablePtr - Oem Front Panel Codec Table Pointer +} FCH_AZALIA; + +/// +/// _SPI_DEVICE_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_DEVICE_PROFILE { + UINT32 JEDEC_ID; /// JEDEC ID + UINT32 RomSize; /// ROM Size + UINT32 SectorSize; /// Sector Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed + UINT8 QeReadRegister; /// QE Read Register + UINT8 QeWriteRegister; /// QE Write Register + UINT8 QeOperateSize; /// QE Operate Size 1byte/2bytes + UINT16 QeLocation; // QE Location in the register +} SPI_DEVICE_PROFILE; + +/// +/// _SPI_CONTROLLER_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_CONTROLLER_PROFILE { +// UINT32 SPI_CONTROLLER_ID; /// SPI Controller ID + UINT16 FifoSize; /// FIFO Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed +} SPI_CONTROLLER_PROFILE; + +/// +/// SPI structure +/// +typedef struct { + BOOLEAN LpcMsiEnable; ///< LPC MSI capability + UINT32 LpcSsid; ///< LPC Subsystem ID + UINT32 RomBaseAddress; ///< SpiRomBaseAddress + /// @par + /// SPI ROM BASE Address + /// + UINT8 SpiSpeed; ///< SpiSpeed - Spi Frequency + /// @par + /// SPI Speed [1.0] - the clock speed for non-fast read command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiFastSpeed; ///< FastSpeed - Spi Fast Speed feature + /// SPIFastSpeed [1.0] - the clock speed for Fast Speed Feature + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 WriteSpeed; ///< WriteSpeed - Spi Write Speed + /// @par + /// WriteSpeed [1.0] - the clock speed for Spi write command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiMode; ///< SpiMode - Spi Mode Setting + /// @par + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< AutoMode - Spi Auto Mode + /// @par + /// SPI Auto Mode + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + /// + UINT8 SpiBurstWrite; ///< SpiBurstWrite - Spi Burst Write Mode + /// @par + /// SPI Burst Write + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + BOOLEAN LpcClk0; ///< Lclk0En - LPCCLK0 + /// @par + /// LPC Clock 0 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol + BOOLEAN LpcClk1; ///< Lclk1En - LPCCLK1 + /// @par + /// LPC Clock 1 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; ///< Spi 100 Enable + SPI_DEVICE_PROFILE SpiDeviceProfile; ///< Spi Device Profile +} FCH_SPI; + + +/// +/// IDE structure +/// +typedef struct { + BOOLEAN IdeEnable; ///< IDE function switch + BOOLEAN IdeMsiEnable; ///< IDE MSI capability + UINT32 IdeSsid; ///< IDE controller Subsystem ID +} FCH_IDE; + +/// +/// IR Structure +/// +typedef struct { + IR_CONFIG IrConfig; ///< IrConfig + UINT8 IrPinControl; ///< IrPinControl +} FCH_IR; + + +/// +/// PCI Bridge Structure +/// +typedef struct { + BOOLEAN PcibMsiEnable; ///< PCI-PCI Bridge MSI capability + UINT32 PcibSsid; ///< PCI-PCI Bridge Subsystem ID + UINT8 PciClks; ///< 33MHz PCICLK0/1/2/3 Enable, bits [0:3] used + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT16 PcibClkStopOverride; ///< PCIB_CLK_Stop Override + BOOLEAN PcibClockRun; ///< Enable the auto clkrun functionality + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// +} FCH_PCIB; + + +/// +/// - SATA Phy setting structure +/// +typedef struct _SATA_PHY_SETTING { + UINT16 PhyCoreControlWord; /// PhyCoreControlWord - Reserved + UINT32 PhyFineTuneDword; /// PhyFineTuneDword - Reserved +} SATA_PHY_SETTING; + +/// +/// SATA main setting structure +/// +typedef struct _SATA_ST { + UINT8 SataModeReg; ///< SataModeReg - Sata Controller Mode + BOOLEAN SataEnable; ///< SataEnable - Sata Controller Function + /// @par + /// Sata Controller + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 Sata6AhciCap; ///< Sata6AhciCap - Reserved */ + BOOLEAN SataSetMaxGen2; ///< SataSetMaxGen2 - Set Sata Max Gen2 mode + /// @par + /// Sata Controller Set to Max Gen2 mode + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN IdeEnable; ///< IdeEnable - Hidden IDE + /// @par + /// Sata IDE Controller Combined Mode + /// Enable - SATA controller has control over Port0 through Port3, + /// IDE controller has control over Port4 and Port7. + /// Disable - SATA controller has full control of all 8 Ports + /// when operating in non-IDE mode. + /// @li <b>0</b> - enable + /// @li <b>1</b> - disable + /// + UINT8 SataClkMode; /// SataClkMode - Reserved +} SATA_ST; + +/// +/// SATA_PORT_ST - SATA PORT structure +/// +typedef struct _SATA_PORT_ST { + UINT8 SataPortReg; ///< SATA Port bit map - bits[0:7] for ports 0 ~ 7 + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN Port0; ///< PORT0 - 0:disable, 1:enable + BOOLEAN Port1; ///< PORT1 - 0:disable, 1:enable + BOOLEAN Port2; ///< PORT2 - 0:disable, 1:enable + BOOLEAN Port3; ///< PORT3 - 0:disable, 1:enable + BOOLEAN Port4; ///< PORT4 - 0:disable, 1:enable + BOOLEAN Port5; ///< PORT5 - 0:disable, 1:enable + BOOLEAN Port6; ///< PORT6 - 0:disable, 1:enable + BOOLEAN Port7; ///< PORT7 - 0:disable, 1:enable +} SATA_PORT_ST; + +/// +///< _SATA_PORT_MD - Force Each PORT to GEN1/GEN2 mode +/// +typedef struct _SATA_PORT_MD { + UINT16 SataPortMode; ///< SATA Port GEN1/GEN2 mode bit map - bits [0:15] for ports 0 ~ 7 + UINT8 Port0; ///< PORT0 - set BIT0 to GEN1, BIT1 - PORT0 set to GEN2 + UINT8 Port1; ///< PORT1 - set BIT2 to GEN1, BIT3 - PORT1 set to GEN2 + UINT8 Port2; ///< PORT2 - set BIT4 to GEN1, BIT5 - PORT2 set to GEN2 + UINT8 Port3; ///< PORT3 - set BIT6 to GEN1, BIT7 - PORT3 set to GEN2 + UINT8 Port4; ///< PORT4 - set BIT8 to GEN1, BIT9 - PORT4 set to GEN2 + UINT8 Port5; ///< PORT5 - set BIT10 to GEN1, BIT11 - PORT5 set to GEN2 + UINT8 Port6; ///< PORT6 - set BIT12 to GEN1, BIT13 - PORT6 set to GEN2 + UINT8 Port7; ///< PORT7 - set BIT14 to GEN1, BIT15 - PORT7 set to GEN2 +} SATA_PORT_MD; +/// +/// SATA structure +/// +typedef struct { + BOOLEAN SataMsiEnable; ///< SATA MSI capability + UINT32 SataIdeSsid; ///< SATA IDE mode SSID + UINT32 SataRaidSsid; ///< SATA RAID mode SSID + UINT32 SataRaid5Ssid; ///< SATA RAID 5 mode SSID + UINT32 SataAhciSsid; ///< SATA AHCI mode SSID + + SATA_ST SataMode; /// SataMode - Reserved + SATA_CLASS SataClass; ///< SataClass - SATA Controller mode [2:0] + UINT8 SataIdeMode; ///< SataIdeMode - Sata IDE Controller mode + /// @par + /// @li <b>0</b> - Legacy IDE mode + /// @li <b>1</b> - Native IDE mode + /// + UINT8 SataDisUnusedIdePChannel; ///< SataDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataDisUnusedIdeSChannel; ///< SataDisUnusedIdeSChannel - Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdePChannel; ///< IdeDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdeSChannel; ///< IdeDisUnusedIdeSChannel-Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataOptionReserved; /// SataOptionReserved - Reserved + + SATA_PORT_ST SataEspPort; ///< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:) + + SATA_PORT_ST SataPortPower; ///< SataPortPower - Port Power configuration + + SATA_PORT_MD SataPortMd; ///< SataPortMd - Port Mode + + UINT8 SataAggrLinkPmCap; /// SataAggrLinkPmCap - 0:OFF 1:ON + UINT8 SataPortMultCap; /// SataPortMultCap - 0:OFF 1:ON + UINT8 SataClkAutoOff; /// SataClkAutoOff - AutoClockOff 0:Disabled, 1:Enabled + UINT8 SataPscCap; /// SataPscCap 1:Enable PSC, 0:Disable PSC capability + UINT8 BiosOsHandOff; /// BiosOsHandOff - Reserved + UINT8 SataFisBasedSwitching; /// SataFisBasedSwitching - Reserved + UINT8 SataCccSupport; /// SataCccSupport - Reserved + UINT8 SataSscCap; /// SataSscCap - 1:Enable, 0:Disable SSC capability + UINT8 SataMsiCapability; /// SataMsiCapability 0:Hidden 1:Visible + UINT8 SataForceRaid; /// SataForceRaid 0:No function 1:Force RAID + UINT8 SataInternal100Spread; /// SataInternal100Spread - Reserved + UINT8 SataDebugDummy; /// SataDebugDummy - Reserved + UINT8 SataTargetSupport8Device; /// SataTargetSupport8Device - Reserved + UINT8 SataDisableGenericMode; /// SataDisableGenericMode - Reserved + BOOLEAN SataAhciEnclosureManagement; /// SataAhciEnclosureManagement - Reserved + UINT8 SataSgpio0; /// SataSgpio0 - Reserved + UINT8 SataSgpio1; /// SataSgpio1 - Reserved + UINT8 SataPhyPllShutDown; /// SataPhyPllShutDown - Reserved + BOOLEAN SataHotRemovalEnh; /// SataHotRemovalEnh - Reserved + + SATA_PORT_ST SataHotRemovalEnhPort; ///< SataHotRemovalEnhPort - Hot Remove + + BOOLEAN SataOobDetectionEnh; /// SataOobDetectionEnh - TRUE + BOOLEAN SataPowerSavingEnh; /// SataPowerSavingEnh - TRUE + UINT8 SataMemoryPowerSaving; /// SataMemoryPowerSaving - 0-3 Default [3] + BOOLEAN SataRasSupport; /// SataRasSupport - Support RAS function TRUE: Enable FALSE: Disable + BOOLEAN SataAhciDisPrefetchFunction; /// SataAhciDisPrefetchFunction - Disable AHCI Prefetch Function Support + BOOLEAN SataDevSlpPort0; /// SataDevSlpPort0 - Reserved + BOOLEAN SataDevSlpPort1; /// SataDevSlpPort1 - Reserved +// UINT8 SataDevSlpPort0S5Pin; /// SataDevSlpPort0S5Pin - Reserved +// UINT8 SataDevSlpPort1S5Pin; /// SataDevSlpPort1S5Pin - Reserved + UINT8 SataDbgTX_DRV_STR ; /// TX_DRV_STR - Reserved + UINT8 SataDbgTX_DE_EMPH_STR ; /// TX_DE_EMPH_STR - Reserved + UINT32 TempMmio; /// TempMmio - Reserved +} FCH_SATA; + + +// +// IMC Message Register Software Interface +// +#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3) + +#define MSG_SYS_TO_IMC 0x80 +#define Fun_80 0x80 +#define Fun_81 0x81 +#define Fun_82 0x82 +#define Fun_83 0x83 +#define Fun_84 0x84 +#define Fun_85 0x85 +#define Fun_86 0x86 +#define Fun_87 0x87 +#define Fun_88 0x88 +#define Fun_89 0x89 +#define Fun_90 0x90 +#define MSG_IMC_TO_SYS 0x81 +#define MSG_REG0 0x82 +#define MSG_REG1 0x83 +#define MSG_REG2 0x84 +#define MSG_REG3 0x85 +#define MSG_REG4 0x86 +#define MSG_REG5 0x87 +#define MSG_REG6 0x88 +#define MSG_REG7 0x89 +#define MSG_REG8 0x8A +#define MSG_REG9 0x8B +#define MSG_REGA 0x8C +#define MSG_REGB 0x8D +#define MSG_REGC 0x8E +#define MSG_REGD 0x8F + +#define DISABLED 0 +#define ENABLED 1 + + + +/// +/// EC structure +/// +typedef struct _FCH_EC { + UINT8 MsgFun81Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone0MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone0MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone0MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone0MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone0MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone0MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone0MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +// EC LDN9 function 81 zone 1 +// + UINT8 MsgFun81Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone1MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone1MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone1MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone1MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone1MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone1MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone1MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 2 +// + UINT8 MsgFun81Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone2MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone2MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone2MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone2MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone2MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone2MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone2MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 3 +// + UINT8 MsgFun81Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone3MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone3MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone3MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone3MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone3MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone3MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone3MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 83 zone 0 +// + UINT8 MsgFun83Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone0MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone0MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone0MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone0MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone0MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone0MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone0MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone0MsgRegA; ///<_CRT + UINT8 MsgFun83Zone0MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 1 +// + UINT8 MsgFun83Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone1MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone1MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone1MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone1MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone1MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone1MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone1MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone1MsgRegA; ///<_CRT + UINT8 MsgFun83Zone1MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 2 +// + UINT8 MsgFun83Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone2MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone2MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone2MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone2MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone2MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone2MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone2MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone2MsgRegA; ///<_CRT + UINT8 MsgFun83Zone2MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 3 +// + UINT8 MsgFun83Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone3MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone3MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone3MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone3MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone3MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone3MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone3MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone3MsgRegA; ///<_CRT + UINT8 MsgFun83Zone3MsgRegB; ///<_PSV +// +//EC LDN9 function 85 zone 0 +// + UINT8 MsgFun85Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 1 +// + UINT8 MsgFun85Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 2 +// + UINT8 MsgFun85Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 3 +// + UINT8 MsgFun85Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 89 TEMPIN channel 0 +// + UINT8 MsgFun89Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 1 +// + UINT8 MsgFun89Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 2 +// + UINT8 MsgFun89Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 3 +// + UINT8 MsgFun89Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgRegA; ///<Mode bit 0-7 +// +// FLAG for Fun83/85/89 support +// + UINT16 IMCFUNSupportBitMap; ///< Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3; +} FCH_EC; + +/// +/// IMC structure +/// +typedef struct _FCH_IMC { + UINT8 ImcEnable; ///< ImcEnable - IMC Enable + UINT8 ImcEnabled; ///< ImcEnabled - IMC Enable + UINT8 ImcSureBootTimer; ///< ImcSureBootTimer - IMc SureBootTimer function + FCH_EC EcStruct; ///< EC structure + UINT8 ImcEnableOverWrite; ///< OverWrite IMC with the EC structure + /// @li <b>00</b> - by default strapping + /// @li <b>01</b> - enable + /// @li <b>10</b> - disable + /// +} FCH_IMC; + + +/// +/// Hpet structure +/// +typedef struct { + BOOLEAN HpetEnable; ///< HPET function switch + + BOOLEAN HpetMsiDis; ///< HpetMsiDis - South Bridge HPET MSI Configuration + /// @par + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT32 HpetBase; ///< HpetBase + /// @par + /// HPET Base address +} FCH_HPET; + + +/// +/// GCPU related parameters +/// +typedef struct { + UINT8 AcDcMsg; ///< Send a message to CPU to indicate the power mode (AC vs battery) + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 TimerTickTrack; ///< Send a message to CPU to indicate the latest periodic timer interval + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 ClockInterruptTag; ///< Mark the periodic timer interrupt + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 OhciTrafficHanding; ///< Cause CPU to break out from C state when USB OHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 EhciTrafficHanding; ///< Cause CPU to break out from C state when USB EHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCMultiCore; ///< Track of CPU C state by monitoring each core's C state message + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCStage; ///< Enable the FCH C state coordination logic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable +} FCH_GCPU; + + +/// +/// Timer +/// +typedef struct { + BOOLEAN Enable; ///< Whether to register timer SMI in POST + BOOLEAN StartNow; ///< Whether to start the SMI immediately during registration + UINT16 CycleDuration; ///< [14:0] - Actual cycle duration = CycleDuration + 1 +} TIMER_SMI; + +/// +/// CS support +/// +typedef struct { + BOOLEAN FchCsD3Cold; ///< FCH Cs D3 Cold function + BOOLEAN FchCsHwReduced; ///< FCH Cs hardware reduced ACPI flag + BOOLEAN FchCsPwrBtn; ///< FCH Cs Power Button function + BOOLEAN FchCsAcDc; ///< FCH Cs AcDc function + BOOLEAN AsfNfcEnable; ///< FCH Cs NFC function + UINT8 AsfNfcInterruptPin; ///< NFC Interrupt pin define + UINT8 AsfNfcRegPuPin; ///< NFC RegPu pin define + UINT8 AsfNfcWakePin; ///< NFC Wake Pin define + UINT8 PowerButtonGpe; ///< GPE# used by Power Button device + UINT8 AcDcTimerGpe; ///< GPE# used by Timer device +} FCH_CS; + + +/// +/// MISC structure +/// +typedef struct { + BOOLEAN NativePcieSupport; /// PCIe NativePcieSupport - Debug function. 1:Enabled, 0:Disabled + BOOLEAN S3Resume; /// S3Resume - Flag of ACPI S3 Resume. + BOOLEAN RebootRequired; /// RebootRequired - Flag of Reboot system is required. + UINT8 FchVariant; /// FchVariant - FCH Variant value. + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + TIMER_SMI LongTimer; ///< Long Timer SMI + TIMER_SMI ShortTimer; ///< Short Timer SMI + UINT32 FchCpuId; ///< Saving CpuId for FCH Module. + BOOLEAN NoneSioKbcSupport; ///< NoneSioKbcSupport - No KBC/SIO controller ( Turn on Inchip KBC emulation function ) + FCH_CS FchCsSupport; ///< FCH Cs function structure +} FCH_MISC; + + +/// +/// SMBus structure +/// +typedef struct { + UINT32 SmbusSsid; ///< SMBUS controller Subsystem ID +} FCH_SMBUS; + + +/// +/// Acpi structure +/// +typedef struct { + UINT16 Smbus0BaseAddress; ///< Smbus0BaseAddress + /// @par + /// Smbus BASE Address + /// + UINT16 Smbus1BaseAddress; ///< Smbus1BaseAddress + /// @par + /// Smbus1 (ASF) BASE Address + /// + UINT16 SioPmeBaseAddress; ///< SioPmeBaseAddress + /// @par + /// SIO PME BASE Address + /// + UINT32 WatchDogTimerBase; ///< WatchDogTimerBase + /// @par + /// Watch Dog Timer Address + /// + UINT16 AcpiPm1EvtBlkAddr; ///< AcpiPm1EvtBlkAddr + /// @par + /// ACPI PM1 event block Address + /// + UINT16 AcpiPm1CntBlkAddr; ///< AcpiPm1CntBlkAddr + /// @par + /// ACPI PM1 Control block Address + /// + UINT16 AcpiPmTmrBlkAddr; ///< AcpiPmTmrBlkAddr + /// @par + /// ACPI PM timer block Address + /// + UINT16 CpuControlBlkAddr; ///< CpuControlBlkAddr + /// @par + /// ACPI CPU control block Address + /// + UINT16 AcpiGpe0BlkAddr; ///< AcpiGpe0BlkAddr + /// @par + /// ACPI GPE0 block Address + /// + UINT16 SmiCmdPortAddr; ///< SmiCmdPortAddr + /// @par + /// SMI command port Address + /// + UINT16 AcpiPmaCntBlkAddr; ///< AcpiPmaCntBlkAddr + /// @par + /// ACPI PMA Control block Address + /// + BOOLEAN AnyHt200MhzLink; ///< AnyHt200MhzLink + /// @par + /// HT Link Speed on 200MHz option for each CPU specific LDTSTP# (Force enable) + /// + BOOLEAN SpreadSpectrum; ///< SpreadSpectrum + /// @par + /// Spread Spectrum function + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + POWER_FAIL PwrFailShadow; ///< PwrFailShadow = PM_Reg: 5Bh [3:0] + /// @par + /// @li <b>00</b> - Always off + /// @li <b>01</b> - Always on + /// @li <b>11</b> - Use previous + /// + UINT8 StressResetMode; ///< StressResetMode 01-10 + /// @li <b>00</b> - Disabed + /// @li <b>01</b> - Io Write 0x64 with 0xfe + /// @li <b>10</b> - Io Write 0xcf9 with 0x06 + /// @li <b>11</b> - Io Write 0xcf9 with 0x0e + /// + BOOLEAN MtC1eEnable; /// MtC1eEnable - Enable MtC1e + VOID* OemProgrammingTablePtr; /// Pointer of ACPI OEM table + UINT8 SpreadSpectrumOptions; /// SpreadSpectrumOptions - Spread Spectrum Option + BOOLEAN PwrDownDisp2ClkPcieR; /// Power down DISP2_CLK and PCIE_RCLK_Output for power savings +} FCH_ACPI; + + +/// +/// HWM temp parameter structure +/// +typedef struct _FCH_HWM_TEMP_PAR { + UINT16 At; ///< At + UINT16 Ct; ///< Ct + UINT8 Mode; ///< Mode BIT0:HiRatio BIT1:HiCurrent +} FCH_HWM_TEMP_PAR; + +/// +/// HWM Current structure +/// +typedef struct _FCH_HWM_CUR { + UINT16 FanSpeed[5]; ///< FanSpeed - fan Speed + UINT16 Temperature[5]; ///< Temperature - temperature + UINT16 Voltage[8]; ///< Voltage - voltage +} FCH_HWM_CUR; + +/// +/// HWM fan control structure +/// +typedef struct _FCH_HWM_FAN_CTR { + UINT8 InputControlReg00; /// Fan Input Control register, PM2 offset [0:4]0 + UINT8 ControlReg01; /// Fan control register, PM2 offset [0:4]1 + UINT8 FreqReg02; /// Fan frequency register, PM2 offset [0:4]2 + UINT8 LowDutyReg03; /// Low Duty register, PM2 offset [0:4]3 + UINT8 MedDutyReg04; /// Med Duty register, PM2 offset [0:4]4 + UINT8 MultiplierReg05; /// Multiplier register, PM2 offset [0:4]5 + UINT16 LowTempReg06; /// Low Temp register, PM2 offset [0:4]6 + UINT16 MedTempReg08; /// Med Temp register, PM2 offset [0:4]8 + UINT16 HighTempReg0A; /// High Temp register, PM2 offset [0:4]A + UINT8 LinearRangeReg0C; /// Linear Range register, PM2 offset [0:4]C + UINT8 LinearHoldCountReg0D; /// Linear Hold Count register, PM2 offset [0:4]D +} FCH_HWM_FAN_CTR; + +/// +/// Hwm structure +/// +typedef struct _FCH_HWM { + UINT8 HwMonitorEnable; ///< HwMonitorEnable + UINT32 HwmControl; ///< hwmControl + /// @par + /// HWM control configuration + /// @li <b>0</b> - HWM is Enabled + /// @li <b>1</b> - IMC is Enabled + /// + UINT8 FanSampleFreqDiv; ///< Sampling rate of Fan Speed + /// @li <b>00</b> - Base(22.5KHz) + /// @li <b>01</b> - Base(22.5KHz)/2 + /// @li <b>10</b> - Base(22.5KHz)/4 + /// @li <b>11</b> - Base(22.5KHz)/8 + /// + UINT8 HwmFchtsiAutoPoll; ///< TSI Auto Polling + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 HwmFchtsiAutoPollStarted; ///< HwmSbtsiAutoPollStarted + UINT8 FanLinearEnhanceEn; ///< FanLinearEnhanceEn + UINT8 FanLinearHoldFix; ///< FanLinearHoldFix + UINT8 FanLinearRangeOutLimit; ///< FanLinearRangeOutLimit + UINT16 HwmCalibrationFactor; /// Calibration Factor + FCH_HWM_CUR HwmCurrent; /// HWM Current structure + FCH_HWM_CUR HwmCurrentRaw; /// HWM Current Raw structure + FCH_HWM_TEMP_PAR HwmTempPar[5]; /// HWM Temp parameter structure + FCH_HWM_FAN_CTR HwmFanControl[5]; /// HWM Fan Control structure + FCH_HWM_FAN_CTR HwmFanControlCooked[5]; /// HWM Fan Control structure +} FCH_HWM; + + +/// +/// Gec structure +/// +typedef struct { + BOOLEAN GecEnable; ///< GecEnable - GEC function switch + UINT8 GecPhyStatus; /// GEC PHY Status + UINT8 GecPowerPolicy; /// GEC Power Policy + /// @li <b>00</b> - GEC is powered down in S3 and S5 + /// @li <b>01</b> - GEC is powered down only in S5 + /// @li <b>10</b> - GEC is powered down only in S3 + /// @li <b>11</b> - GEC is never powered down + /// + UINT8 GecDebugBus; /// GEC Debug Bus + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT32 GecShadowRomBase; ///< GecShadowRomBase + /// @par + /// GEC (NIC) SHADOWROM BASE Address + /// + VOID *PtrDynamicGecRomAddress; /// Pointer of Dynamic GEC ROM Address +} FCH_GEC; + + +/// +/// _ABTblEntry - AB link register table R/W structure +/// +typedef struct _AB_TBL_ENTRY { + UINT8 RegType; /// RegType : AB Register Type (ABCFG, AXCFG and so on) + UINT32 RegIndex; /// RegIndex : AB Register Index + UINT32 RegMask; /// RegMask : AB Register Mask + UINT32 RegData; /// RegData : AB Register Data +} AB_TBL_ENTRY; + +/// +/// AB structure +/// +typedef struct { + BOOLEAN AbMsiEnable; ///< ABlink MSI capability + UINT8 ALinkClkGateOff; /// Alink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 BLinkClkGateOff; /// Blink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 GppClockRequest0; /// GPP Clock Request. + UINT8 GppClockRequest1; /// GPP Clock Request. + UINT8 GppClockRequest2; /// GPP Clock Request. + UINT8 GppClockRequest3; /// GPP Clock Request. + UINT8 GfxClockRequest; /// GPP Clock Request. + UINT8 AbClockGating; /// AB Clock Gating - 0:disable, 1:enable *KR *CZ + UINT8 GppClockGating; /// GPP Clock Gating - 0:disable, 1:enable + UINT8 UmiL1TimerOverride; /// UMI L1 inactivity timer overwrite value + UINT8 UmiLinkWidth; /// UMI Link Width + UINT8 UmiDynamicSpeedChange; /// UMI Dynamic Speed Change - 0:disable, 1:enable + UINT8 PcieRefClockOverClocking; /// PCIe Ref Clock OverClocking value + UINT8 UmiGppTxDriverStrength; /// UMI GPP TX Driver Strength + BOOLEAN NbSbGen2; /// UMI link Gen2 - 0:Gen1, 1:Gen2 + UINT8 PcieOrderRule; /// PCIe Order Rule - 0:disable, 1:enable *KR AB Posted Pass Non-Posted + UINT8 SlowSpeedAbLinkClock; /// Slow Speed AB Link Clock - 0:disable, 1:enable *KR + BOOLEAN ResetCpuOnSyncFlood; /// Reset Cpu On Sync Flood - 0:disable, 1:enable *KR + BOOLEAN AbDmaMemoryWrtie3264B; /// AB DMA Memory Write 32/64 BYTE Support *KR only + BOOLEAN AbMemoryPowerSaving; /// AB Memory Power Saving *KR *CZ + BOOLEAN SbgDmaMemoryWrtie3264ByteCount; /// SBG DMA Memory Write 32/64 BYTE Count Support *KR only + BOOLEAN SbgMemoryPowerSaving; /// SBG Memory Power Saving *KR *CZ + BOOLEAN SbgClockGating; /// SBG Clock Gate *CZ + BOOLEAN XdmaDmaWrite16ByteMode; /// XDMA DMA Write 16 byte mode *CZ + BOOLEAN XdmaMemoryPowerSaving; /// XDMA memory power saving *CZ + UINT8 XdmaPendingNprThreshold; /// XDMA PENDING NPR THRESHOLD *CZ + BOOLEAN XdmaDncplOrderDis; /// XDMA DNCPL ORDER DIS *CZ +} FCH_AB; + + +/** + * PCIE_CAP_ID - PCIe Cap ID + * + */ +#define PCIE_CAP_ID 0x10 + +/// +/// FCH_GPP_PORT_CONFIG - Fch GPP port config structure +/// +typedef struct { + BOOLEAN PortPresent; ///< Port connection + /// @par + /// @li <b>0</b> - Port doesn't have slot. No need to train the link + /// @li <b>1</b> - Port connection defined and needs to be trained + /// + BOOLEAN PortDetected; ///< Link training status + /// @par + /// @li <b>0</b> - EP not detected + /// @li <b>1</b> - EP detected + /// + BOOLEAN PortIsGen2; ///< Port link speed configuration + /// @par + /// @li <b>00</b> - Auto + /// @li <b>01</b> - Forced GEN1 + /// @li <b>10</b> - Forced GEN2 + /// @li <b>11</b> - Reserved + /// + BOOLEAN PortHotPlug; ///< Support hot plug? + /// @par + /// @li <b>0</b> - No support + /// @li <b>1</b> - support + /// + UINT8 PortMisc; /// PortMisc - Reserved +} FCH_GPP_PORT_CONFIG; + +/// +/// GPP structure +/// +typedef struct { + FCH_GPP_PORT_CONFIG PortCfg[4]; /// GPP port configuration structure + GPP_LINKMODE GppLinkConfig; ///< GppLinkConfig - PCIE_GPP_Enable[3:0] + /// @li <b>0000</b> - Port ABCD -> 4:0:0:0 + /// @li <b>0010</b> - Port ABCD -> 2:2:0:0 + /// @li <b>0011</b> - Port ABCD -> 2:1:1:0 + /// @li <b>0100</b> - Port ABCD -> 1:1:1:1 + /// + BOOLEAN GppFunctionEnable; ///< GPP Function - 0:disable, 1:enable + BOOLEAN GppToggleReset; ///< Toggle GPP core reset + UINT8 GppHotPlugGeventNum; ///< Hotplug GEVENT # - valid value 0-31 + UINT8 GppFoundGfxDev; ///< Gpp Found Gfx Device + /// @li <b>0</b> - Not found + /// @li <b>1</b> - Found + /// + BOOLEAN GppGen2; ///< GPP Gen2 - 0:disable, 1:enable + UINT8 GppGen2Strap; ///< GPP Gen2 Strap - 0:disable, 1:enable, FCH itself uses this + BOOLEAN GppMemWrImprove; ///< GPP Memory Write Improve - 0:disable, 1:enable + BOOLEAN GppUnhidePorts; ///< GPP Unhide Ports - 0:disable, 1:enable + UINT8 GppPortAspm; ///< GppPortAspm - ASPM state for all GPP ports + /// @li <b>01</b> - Disabled + /// @li <b>01</b> - L0s + /// @li <b>10</b> - L1 + /// @li <b>11</b> - L0s + L1 + /// + BOOLEAN GppLaneReversal; ///< GPP Lane Reversal - 0:disable, 1:enable + BOOLEAN GppPhyPllPowerDown; ///< GPP PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN GppDynamicPowerSaving; ///< GPP Dynamic Power Saving - 0:disable, 1:enable + BOOLEAN PcieAer; ///< PcieAer - Advanced Error Report: 0/1-disable/enable + BOOLEAN PcieRas; ///< PCIe RAS - 0:disable, 1:enable + BOOLEAN PcieCompliance; ///< PCIe Compliance - 0:disable, 1:enable + BOOLEAN PcieSoftwareDownGrade; ///< PCIe Software Down Grade + BOOLEAN UmiPhyPllPowerDown; ///< UMI PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN SerialDebugBusEnable; ///< Serial Debug Bus Enable + UINT8 GppHardwareDownGrade; ///< GppHardwareDownGrade - Gpp HW Down Grade function 0:Disable, 1-4: portA-D + UINT8 GppL1ImmediateAck; ///< GppL1ImmediateAck - Gpp L1 Immediate ACK 0: enable, 1: disable + BOOLEAN NewGppAlgorithm; ///< NewGppAlgorithm - New GPP procedure + UINT8 HotPlugPortsStatus; ///< HotPlugPortsStatus - Save Hot-Plug Ports Status + UINT8 FailPortsStatus; ///< FailPortsStatus - Save Failure Ports Status + UINT8 GppPortMinPollingTime; ///< GppPortMinPollingTime - Min. Polling time for Gpp Port Training + BOOLEAN IsCapsuleMode; ///< IsCapsuleMode - Support Capsule Mode in FCH +} FCH_GPP; + + +/// +/// FCH USB3 Debug Sturcture +/// +typedef struct { + BOOLEAN ServiceIntervalEnable; ///< Service Interval Enable + BOOLEAN BandwidthExpandEnable; ///< Bandwidth Expand Enable + BOOLEAN AoacEnable; ///< Aoac Enable + BOOLEAN HwLpmEnable; ///< HwLpm Enable + BOOLEAN DbcEnable; ///< DBC Enable + BOOLEAN MiscPlusEnable; ///< Misc Plus Enable + BOOLEAN EcoFixEnable; ///< Eco Fix Enable + BOOLEAN SsifEnable; ///< SSIF Enable + BOOLEAN U2ifEnable; ///< U2IF Enable + BOOLEAN FseEnable; ///< FSE Enable + BOOLEAN XhcPmeEnable; ///< Xhc Pme Enable +} USB3_DEBUG; + +/// +/// FCH IoMux Sturcture +/// +typedef struct { + UINT8 CbsDbgFchSmbusI2c2Egpio; ///< SMBUS/I2C_2/EGPIO_113_114 + UINT8 CbsDbgFchAsfI2c3Egpio; ///< ASF/I2C_3/EGPIO_019_020 +} FCH_IOMUX; + +/// +/// FCH USB sturcture +/// +typedef struct { + BOOLEAN Ohci1Enable; ///< OHCI1 controller enable + BOOLEAN Ohci2Enable; ///< OHCI2 controller enable + BOOLEAN Ohci3Enable; ///< OHCI3 controller enable + BOOLEAN Ohci4Enable; ///< OHCI4 controller enable + BOOLEAN Ehci1Enable; ///< EHCI1 controller enable + BOOLEAN Ehci2Enable; ///< EHCI2 controller enable + BOOLEAN Ehci3Enable; ///< EHCI3 controller enable + BOOLEAN Xhci0Enable; ///< XHCI0 controller enable + BOOLEAN Xhci1Enable; ///< XHCI1 controller enable + BOOLEAN UsbMsiEnable; ///< USB MSI capability + UINT32 OhciSsid; ///< OHCI SSID + UINT32 Ohci4Ssid; ///< OHCI 4 SSID + UINT32 EhciSsid; ///< EHCI SSID + UINT32 XhciSsid; ///< XHCI SSID + BOOLEAN UsbPhyPowerDown; ///< USB PHY Power Down - 0:disable, 1:enable + UINT32 UserDefineXhciRomAddr; ///< XHCI ROM address define by platform BIOS + UINT8 Ehci1Phy[5]; ///< EHCI1 USB PHY Driving Strength value table + UINT8 Ehci2Phy[5]; ///< EHCI2 USB PHY Driving Strength value table + UINT8 Ehci3Phy[4]; ///< EHCI3 USB PHY Driving Strength value table + UINT8 Xhci20Phy[4]; ///< XHCI USB 2.0 PHY Driving Strength value table + UINT8 Ehci1DebugPortSel; ///< DebugPortSel for Ehci1 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci2DebugPortSel; ///< DebugPortSel for Ehci2 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci3DebugPortSel; ///< DebugPortSel for Ehci3 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci1NPort; ///< N_Port for Ehci1, 2 to 4 + UINT8 Ehci2NPort; ///< N_Port for Ehci2, 2 to 4 + USB3_DEBUG Usb3Debug; ///< Usb3 Debug Options + BOOLEAN EhciSimpleDebugPort; ///< Ehci Simple Debug Port + BOOLEAN UsbBatteryChargeEnable; ///< USB Battery Charge Enable + BOOLEAN ReduceUSB3PortToLastTwo; ///< Reduce USB3.0 ports to last 2 + UINT8 USB30PortInit; ///< USB 3.0 Port Init +} FCH_USB; + + +/// Private: FCH_DATA_BLOCK_RESET +typedef struct _FCH_RESET_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + FCH_RESET_INTERFACE FchReset; ///< Reset interface + + UINT8 FastSpeed; ///< SPI FastSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 WriteSpeed; ///< SPI Write Speed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 Mode; ///< SPI Mode + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< SPI Auto Mode - 0:disable, 1:enable + UINT8 BurstWrite; ///< SPI Burst Write - 0:disable, 1:enable + BOOLEAN Sata6AhciCap; ///< SATA 6 AHCI Capability - TRUE:enable, FALSE:disable + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + BOOLEAN EcKbd; ///< EC KBD - 0:disable, 1:enable + BOOLEAN LegacyFree; ///< Legacy Free - 0:disable, 1:enable + BOOLEAN SataSetMaxGen2; ///< SATA enable maximum GEN2 + UINT8 SataClkMode; ///< SATA reference clock selector and divider + UINT8 SataModeReg; ///< Output: SATAConfig PMIO:0xDA + BOOLEAN SataInternal100Spread; ///< SATA internal 100MHz spread ON/OFF + UINT8 SpiSpeed; ///< SPI NormSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; /// + BOOLEAN EcChannel0; ///< Enable EC channel 0 + FCH_GPP Gpp; ///< GPP subsystem + FCH_SPI Spi; ///< SPI subsystem + BOOLEAN QeEnabled; /// Quad Mode Enabled + BOOLEAN FchOscout1ClkContinous; ///< FCH OSCOUT1_CLK Continous + UINT8 LpcClockDriveStrength; ///< Lpc Clock Drive Strength + const VOID* EarlyOemGpioTable; /// Pointer of Early OEM GPIO table +// VOID* OemSpiDeviceTable; /// Pointer of OEM Spi Device table +} FCH_RESET_DATA_BLOCK; + + +/// Private: FCH_DATA_BLOCK +typedef struct _FCH_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + FCH_RUNTIME FchRunTime; ///< FCH Run Time Parameters + + FCH_ACPI HwAcpi; ///< ACPI structure + FCH_AB Ab; ///< AB structure + FCH_GPP Gpp; ///< GPP structure + FCH_USB Usb; ///< USB structure + FCH_SATA Sata; ///< SATA structure + FCH_SMBUS Smbus; ///< SMBus structure + FCH_IDE Ide; ///< IDE structure + FCH_AZALIA Azalia; ///< Azalia structure + FCH_SPI Spi; ///< SPI structure + FCH_PCIB Pcib; ///< PCIB structure + FCH_GEC Gec; ///< GEC structure + FCH_SD Sd; ///< SD structure + FCH_HWM Hwm; ///< Hardware Moniter structure + FCH_IR Ir; ///< IR structure + FCH_HPET Hpet; ///< HPET structure + FCH_GCPU Gcpu; ///< GCPU structure + FCH_IMC Imc; ///< IMC structure + FCH_MISC Misc; ///< MISC structure + FCH_IOMUX IoMux; ///< MISC structure + VOID* PostOemGpioTable; /// Pointer of Post OEM GPIO table +} FCH_DATA_BLOCK; + +#pragma pack (pop) + +#endif diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchDef.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchDef.h new file mode 100644 index 0000000000..d0063a4836 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchDef.h @@ -0,0 +1,421 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH routine definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FCH_DEF_H_ +#define _FCH_DEF_H_ + + +UINT32 ReadAlink (IN UINT32 Index, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteAlink (IN UINT32 Index, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwAlink (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID WriteMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID RwMem (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data); +VOID ReadPci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPci (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramPciByteTable (IN REG8_MASK* pPciByteTable, IN UINT16 dwTableSize, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchAcpiMmioTbl (IN ACPI_REG_WRITE *pAcpiTbl, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchSciMapTbl (IN SCI_MAP_CONTROL *pSciMapTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID ProgramFchGpioTbl (IN GPIO_CONTROL *pGpioTbl); +VOID ProgramFchSataPhyTbl (IN SATA_PHY_CONTROL *pSataPhyTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID GetChipSysMode (IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsImcEnabled (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiMmioBase (OUT UINT32 *AcpiMmioBase, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiPmBase (OUT UINT16 *AcpiPmBase, IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchSleepType (IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchChipsetRevision (IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Fch Ab Routines +/// +/// Pei Phase +/// +VOID FchInitResetAb (IN VOID* FchDataPtr); +VOID FchProgramAbPowerOnReset (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAb (IN VOID* FchDataPtr); +VOID FchInitEnvAbSpecial (IN VOID* FchDataPtr); +VOID FchInitMidAb (IN VOID* FchDataPtr); +VOID FchInitLateAb (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchInitEnvAbLinkInit (IN VOID* FchDataPtr); +BOOLEAN IsUmiOneLaneGen1Mode (IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchAbLateProgram (IN VOID* FchDataPtr); + +/// +/// Fch Pcie Routines +/// +/// +/// Dxe Phase +/// +VOID ProgramPcieNativeMode (IN VOID* FchDataPtr); + +/// +/// Fch Gpp Routines +/// + +/// +/// Common Gpp Routines +/// +VOID FchGppDynamicPowerSaving (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Fch Azalia Routines +/// +/// Pei Phase +/// +VOID FchInitResetAzalia (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAzalia (IN VOID *FchDataPtr); +VOID FchInitMidAzalia (IN VOID *FchDataPtr); +VOID FchInitLateAzalia (IN VOID *FchDataPtr); + + +/// +/// Fch HwAcpi Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitResetHwAcpi (IN VOID *FchDataPtr); +VOID ProgramFchHwAcpiResetP (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitEnvHwAcpi (IN VOID *FchDataPtr); +VOID ProgramEnvPFchAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvHwAcpiPciReg (IN VOID *FchDataPtr); +VOID ProgramSpecificFchInitEnvAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvSpreadSpectrum (IN VOID *FchDataPtr); +VOID FchInitMidHwAcpi (IN VOID *FchDataPtr); +VOID FchInitLateHwAcpi (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// +VOID HpetInit (IN VOID *FchDataPtr); +VOID MtC1eEnable (IN VOID *FchDataPtr); +VOID GcpuRelatedSetting (IN VOID *FchDataPtr); +VOID StressResetModeLate (IN VOID *FchDataPtr); + +/// +/// Fch Hwm Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwm (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwm (IN VOID* FchDataPtr); +VOID FchInitMidHwm (IN VOID* FchDataPtr); +VOID FchInitLateHwm (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID HwmInitRegister (IN VOID* FchDataPtr); +VOID FchECfancontrolservice (IN VOID* FchDataPtr); + + +/// +/// Fch Imc Routines +/// +/// Pei Phase +/// +VOID FchInitResetImc (IN VOID *FchDataPtr); +VOID FchInitResetEc (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvImc (IN VOID *FchDataPtr); +VOID FchInitMidImc (IN VOID *FchDataPtr); +VOID FchInitLateImc (IN VOID *FchDataPtr); +VOID FchInitEnvEc (IN VOID *FchDataPtr); +VOID FchInitMidEc (IN VOID *FchDataPtr); +VOID FchInitLateEc (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID EnterEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ExitEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwEc8 (IN UINT8 Address, IN UINT8 AndMask, IN UINT8 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WaitForEcLDN9MailboxCmdAck (IN AMD_CONFIG_PARAMS *StdHeader); + +VOID ImcSleep (IN VOID *FchDataPtr); +VOID ImcDisarmSurebootTimer (IN VOID *FchDataPtr); +VOID ImcDisableSurebootTimer (IN VOID *FchDataPtr); +VOID ImcWakeup (IN VOID *FchDataPtr); +VOID ImcIdle (IN VOID *FchDataPtr); +BOOLEAN ValidateImcFirmware (IN VOID *FchDataPtr); +VOID SoftwareToggleImcStrapping (IN VOID *FchDataPtr); +VOID ImcCrashReset (IN VOID *FchDataPtr); +VOID SoftwareDisableImc (IN VOID *FchDataPtr); + + +/// +/// Fch Ir Routines +/// +/// Dxe Phase +/// +VOID FchInitEnvIr (IN VOID* FchDataPtr); +VOID FchInitMidIr (IN VOID* FchDataPtr); +VOID FchInitLateIr (IN VOID* FchDataPtr); + +/// +/// Fch SATA Routines +/// +/// Pei Phase +/// +VOID FchInitResetSata (IN VOID *FchDataPtr); +VOID FchInitResetSataProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitMidSata (IN VOID *FchDataPtr); +VOID FchInitEnvSata (IN VOID *FchDataPtr); +VOID FchInitEnvProgramSataPciRegs (IN VOID *FchDataPtr); +VOID FchInitMidProgramSataRegs (IN VOID *FchDataPtr); +VOID FchInitLateProgramSataRegs (IN VOID *FchDataPtr); + +VOID FchInitLateSata (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde (IN VOID *FchDataPtr); +VOID FchInitMidSataIde (IN VOID *FchDataPtr); +VOID FchInitLateSataIde (IN VOID *FchDataPtr); +VOID FchInitEnvSataAhci (IN VOID *FchDataPtr); +VOID FchInitMidSataAhci (IN VOID *FchDataPtr); +VOID FchInitLateSataAhci (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaid (IN VOID *FchDataPtr); +VOID FchInitMidSataRaid (IN VOID *FchDataPtr); +VOID FchInitLateSataRaid (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitMidSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitLateSataIde2Ahci (IN VOID *FchDataPtr); + +VOID SataAhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataRaidSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataIde2AhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataSetIrqIntResource (IN VOID *FchDataPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataBar5setting (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID SataEnableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataDisableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID FchSataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID ShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID FchShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID SataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID FchSataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID SataBar5RegSet (IN VOID *FchDataPtr); +VOID SataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchSataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchProgramSataPhy (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaidProgram (IN VOID *FchDataPtr); + +/// +/// FCH USB Controller Public Function +/// +/// Pei Phase +/// +VOID FchInitResetUsb (IN VOID *FchDataPtr); +VOID FchInitResetEhci (IN VOID *FchDataPtr); +VOID FchInitResetXhci (IN VOID *FchDataPtr); +VOID FchInitResetXhciProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvUsb (IN VOID *FchDataPtr); +VOID FchInitMidUsb (IN VOID *FchDataPtr); +VOID FchInitLateUsb (IN VOID *FchDataPtr); +VOID FchInitEnvUsbEhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbEhci (IN VOID *FchDataPtr); +VOID FchEhciDebugPortService (IN VOID *FchDataPtr); +VOID FchInitEnvUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbXhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci1 (IN FCH_DATA_BLOCK *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSetUsbEnableReg (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchEhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitIndirectReg (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchInitLateUsbXhciProgram (IN VOID *FchDataPtr); +VOID FchXhciPowerSavingProgram (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciUsbPhyCalibrated (IN FCH_DATA_BLOCK* FchDataPtr); +UINT8 FchUsbCommonPhyCalibration (IN FCH_DATA_BLOCK* FchDataPtr); + +/// +/// Fch Sd Routines +/// +VOID FchInitEnvSd (IN VOID *FchDataPtr); +VOID FchInitMidSd (IN VOID *FchDataPtr); +VOID FchInitLateSd (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// + +VOID FchInitEnvSdProgram (IN VOID *FchDataPtr); + +/// +/// Fch Spi Routines +/// +/// Pei Phase +/// +VOID FchInitResetSpi (IN VOID *FchDataPtr); +VOID FchInitResetLpc (IN VOID *FchDataPtr); +VOID FchInitResetLpcProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvSpi (IN VOID *FchDataPtr); +VOID FchInitMidSpi (IN VOID *FchDataPtr); +VOID FchInitLateSpi (IN VOID *FchDataPtr); +VOID FchInitEnvLpc (IN VOID *FchDataPtr); +VOID FchInitMidLpc (IN VOID *FchDataPtr); +VOID FchInitLateLpc (IN VOID *FchDataPtr); +VOID FchInitEnvLpcProgram (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSpiUnlock (IN VOID *FchDataPtr); +VOID FchSpiLock (IN VOID *FchDataPtr); + +/*--------------------------- Documentation Pages ---------------------------*/ +VOID FchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID CimFchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchPciReset (IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort80 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort1080 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetEfuseStatus (IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID TurnOffCG2 (OUT VOID); +VOID BackUpCG2 (OUT VOID); +VOID FchCopyMem (IN VOID* pDest, IN VOID* pSource, IN UINTN Length); +VOID* GetRomSigPtr (IN UINTN* RomSigPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhciIndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci0IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci1IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci0Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci1Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID AcLossControl (IN UINT8 AcLossControlValue); +VOID FchVgaInit (OUT VOID); +VOID RecordFchConfigPtr (IN UINT32 FchConfigPtr); +VOID ValidateFchVariant (IN VOID *FchDataPtr); +VOID RecordSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ClearAllSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsExternalClockMode (IN VOID *FchDataPtr); +VOID SbSleepTrapControl (IN BOOLEAN SleepTrap); + +AGESA_STATUS +FchSpiTransfer ( + IN UINT8 PrefixCode, + IN UINT8 Opcode, + IN OUT UINT8 *DataPtr, + IN UINT8 *AddressPtr, + IN UINT8 Length, + IN BOOLEAN WriteFlag, + IN BOOLEAN AddressFlag, + IN BOOLEAN DataFlag, + IN BOOLEAN FinishedFlag + ); + +BOOLEAN +FchConfigureSpiDeviceDummyCycle ( + IN UINT32 DeviceID, + IN UINT8 SpiMode + ); + +UINT32 +FchReadSpiId ( + IN BOOLEAN Flag + ); + +BOOLEAN +FchPlatformSpiQe ( + IN VOID *FchDataPtr + ); + +FCH_DATA_BLOCK* +FchInitLoadDataBlock ( + IN FCH_INTERFACE *FchInterface, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +FCH_DATA_BLOCK* +FchInitEnvCreatePrivateData ( + IN AMD_ENV_PARAMS *EnvParams + ); + +FCH_RESET_DATA_BLOCK* +FchInitResetLoadPrivateDefault ( + IN AMD_RESET_PARAMS *ResetParams + ); + +VOID +RetrieveDataBlockFromInitReset ( + IN FCH_DATA_BLOCK *FchParams + ); + + +#endif + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchLib.c b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchLib.c new file mode 100644 index 0000000000..dfdab59f08 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchLib.c @@ -0,0 +1,672 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH IO access common routine + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include "FchPlatform.h" +#define FILECODE PROC_FCH_COMMON_FCHLIB_FILECODE + +/**< FchStall - Reserved */ +VOID +FchStall ( + IN UINT32 uSec, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT16 timerAddr; + UINT32 startTime; + UINT32 elapsedTime; + + LibAmdMemRead (AccessWidth16, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64), &timerAddr, StdHeader); + if ( timerAddr == 0 ) { + uSec = uSec / 2; + while ( uSec != 0 ) { + LibAmdIoRead (AccessWidth8, FCHOEM_IO_DELAY_PORT, (UINT8 *) (&startTime), StdHeader); + uSec--; + } + } else { + LibAmdIoRead (AccessWidth32, timerAddr, &startTime, StdHeader); + for ( ;; ) { + LibAmdIoRead (AccessWidth32, timerAddr, &elapsedTime, StdHeader); + if ( elapsedTime < startTime ) { + elapsedTime = elapsedTime + FCH_MAX_TIMER - startTime; + } else { + elapsedTime = elapsedTime - startTime; + } + if ( (elapsedTime * FCHOEM_ELAPSED_TIME_UNIT / FCHOEM_ELAPSED_TIME_DIVIDER) > uSec ) { + break; + } + } + } +} + +/**< cimFchStall - Reserved */ +VOID +CimFchStall ( + IN UINT32 uSec, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT16 timerAddr; + UINT32 startTime; + UINT32 elapsedTime; + + LibAmdMemRead (AccessWidth16, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64), &timerAddr, StdHeader); + if ( timerAddr == 0 ) { + uSec = uSec / 2; + while ( uSec != 0 ) { + LibAmdIoRead (AccessWidth8, FCHOEM_IO_DELAY_PORT, (UINT8*)&elapsedTime, StdHeader); + uSec--; + } + } else { + LibAmdIoRead (AccessWidth32, timerAddr, &startTime, StdHeader); + for ( ;; ) { + LibAmdIoRead (AccessWidth32, timerAddr, &elapsedTime, StdHeader); + if ( elapsedTime < startTime ) { + elapsedTime = elapsedTime + FCH_MAX_TIMER - startTime; + } else { + elapsedTime = elapsedTime - startTime; + } + if ( (elapsedTime * FCHOEM_ELAPSED_TIME_UNIT / FCHOEM_ELAPSED_TIME_DIVIDER) > uSec ) { + break; + } + } + } +} + +/**< FchReset - Reserved */ +VOID +FchPciReset ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 PciRstValue; + + PciRstValue = 0x06; + LibAmdIoWrite (AccessWidth8, FCH_PCIRST_BASE_IO, &PciRstValue, StdHeader); +} + +/**< outPort80 - Reserved */ +VOID +OutPort80 ( + IN UINT32 pcode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + LibAmdIoWrite (AccessWidth8, FCHOEM_OUTPUT_DEBUG_PORT, &pcode, StdHeader); + return; +} + +/**< outPort1080 - Reserved */ +VOID +OutPort1080 ( + IN UINT32 pcode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + LibAmdIoWrite (AccessWidth32, 0x1080, &pcode, StdHeader); + return; +} + +/**< FchCopyMem - Reserved */ +VOID +FchCopyMem ( + IN VOID* pDest, + IN VOID* pSource, + IN UINTN Length + ) +{ + UINTN i; + UINT8 *Ptr; + UINT8 *Source; + Ptr = (UINT8*)pDest; + Source = (UINT8*)pSource; + for (i = 0; i < Length; i++) { + *Ptr = *Source; + Source++; + Ptr++; + } +} + +/** GetRomSigPtr - Reserved **/ +VOID* +GetRomSigPtr ( + IN UINTN *RomSigPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RomPtr; + UINT32 RomSig; + UINT16 MswAddr; + + *RomSigPtr = 0; + MswAddr = 0xFF00; + do { + RomPtr = (MswAddr << 16) + FCH_ROMSIG_BASE_IO; + LibAmdMemRead (AccessWidth32, (UINT64) RomPtr, &RomSig, StdHeader); + if (RomSig == FCH_ROMSIG_SIGNATURE) { + *RomSigPtr = RomPtr; + break; + } + MswAddr >>= 1; + MswAddr |= BIT15; + } while (MswAddr != 0xFFF8); + return RomSigPtr; +} + +/** RwXhciIndReg - Reserved **/ +VOID +RwXhciIndReg ( + IN UINT32 Index, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RevReg; + PCI_ADDR PciAddress; + + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader); + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C; + RevReg = ~AndMask; + LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader); + + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader); + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x4C; + RevReg = ~AndMask; + LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader); +} + +/** RwXhci0IndReg - Reserved **/ +VOID +RwXhci0IndReg ( + IN UINT32 Index, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RevReg; + PCI_ADDR PciAddress; + + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader); + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C; + RevReg = ~AndMask; + LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader); +} + +/** RwXhci1IndReg - Reserved **/ +VOID +RwXhci1IndReg ( + IN UINT32 Index, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RevReg; + PCI_ADDR PciAddress; + + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader); + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x4C; + RevReg = ~AndMask; + LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader); +} + +/** ReadXhci0Phy - Reserved **/ +VOID +ReadXhci0Phy ( + IN UINT32 Port, + IN UINT32 Address, + IN UINT32 *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RegIndex; + UINT32 RegValue; + PCI_ADDR PciAddress; + + RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + Address, StdHeader); + + RegIndex = FCH_XHCI_IND60_REG04; + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &RegIndex, StdHeader); + PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + + (*Value) = ( RegValue >> (Port * 8)) & 0x000000FF; +} + +/** ReadXhci1Phy - Reserved **/ +VOID +ReadXhci1Phy ( + IN UINT32 Port, + IN UINT32 Address, + IN UINT32 *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RegIndex; + UINT32 RegValue; + PCI_ADDR PciAddress; + + RwXhci1IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + Address, StdHeader); + + RegIndex = FCH_XHCI_IND60_REG04; + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x48; + LibAmdPciWrite (AccessWidth32, PciAddress, &RegIndex, StdHeader); + PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x4C; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + + (*Value) = ( RegValue >> (Port * 8)) & 0x000000FF; +} + +/** AcLossControl - Reserved **/ +VOID +AcLossControl ( + IN UINT8 AcLossControlValue + ) +{ + AcLossControlValue &= 0x03; + AcLossControlValue |= BIT2; + RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG5B, AccessWidth8, 0xF0, AcLossControlValue); +} + +/** RecordFchConfigPtr - Reserved **/ +VOID +RecordFchConfigPtr ( + IN UINT32 FchConfigPtr + ) +{ + RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x08, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 0) & 0xFF) ); + RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x09, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 8) & 0xFF) ); + RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x0A, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 16) & 0xFF) ); + RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x0B, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 24) & 0xFF) ); +} + +/** ReadAlink - Reserved **/ +UINT32 +ReadAlink ( + IN UINT32 Index, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Data; + LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader); + LibAmdIoRead (AccessWidth32, ALINK_ACCESS_DATA, &Data, StdHeader); + //Clear Index + Index = 0; + LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader); + return Data; +} + +/** WriteAlink - Reserved **/ +VOID +WriteAlink ( + IN UINT32 Index, + IN UINT32 Data, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader); + LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_DATA, &Data, StdHeader); + //Clear Index + Index = 0; + LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader); +} + +/** RwAlink - Reserved **/ +VOID +RwAlink ( + IN UINT32 Index, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 AccessType; + + AccessType = Index & 0xE0000000; + if (AccessType == (AXINDC << 29)) { + WriteAlink ((FCH_AX_INDXC_REG30 | AccessType), Index & 0x1FFFFFFF, StdHeader); + Index = FCH_AX_DATAC_REG34 | AccessType; + } else if (AccessType == (AXINDP << 29)) { + WriteAlink ((FCH_AX_INDXP_REG38 | AccessType), Index & 0x1FFFFFFF, StdHeader); + Index = FCH_AX_DATAP_REG3C | AccessType; + } + WriteAlink (Index, (ReadAlink (Index, StdHeader) & AndMask) | OrMask, StdHeader); +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Read PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * @param[in] StdHeader + * + */ +VOID +ReadPmio ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + for (i = 0; i < OpFlag; i++) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD6, &Address, StdHeader); + Address++; + LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD7, (UINT8 *)Value + i, StdHeader); + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * @param[in] StdHeader + * + */ +VOID +WritePmio ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + for (i = 0; i < OpFlag; i++) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD6, &Address, StdHeader); + Address++; + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD7, (UINT8 *)Value + i, StdHeader); + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * RwPmio - Read/Write PMIO + * + * + * + * @param[in] Address - PMIO Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * @param[in] StdHeader + * + */ +VOID +RwPmio ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Result; + + ReadPmio (Address, OpFlag, &Result, StdHeader); + Result = (Result & AndMask) | OrMask; + WritePmio (Address, OpFlag, &Result, StdHeader); +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Read PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * @param[in] StdHeader + * + */ +VOID +ReadPmio2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + for ( i = 0; i < OpFlag; i++ ) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD0, &Address, StdHeader); + Address++; + LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD1, (UINT8 *) Value + i, StdHeader); + } +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Write PMIO 2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * @param[in] StdHeader + * + */ +VOID +WritePmio2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + + for ( i = 0; i < OpFlag; i++ ) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD0, &Address, StdHeader); + Address++; + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD1, (UINT8 *) Value + i, StdHeader); + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * RwPmio2 - Read/Write PMIO2 + * + * + * + * @param[in] Address - PMIO2 Offset value + * @param[in] OpFlag - Access sizes + * @param[in] AndMask - Data And Mask 32 bits + * @param[in] OrMask - Data OR Mask 32 bits + * @param[in] StdHeader + * + */ +VOID +RwPmio2 ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN UINT32 AndMask, + IN UINT32 OrMask, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Result; + + ReadPmio2 (Address, OpFlag, &Result, StdHeader); + Result = (Result & AndMask) | OrMask; + WritePmio2 (Address, OpFlag, &Result, StdHeader); +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Read BIOSRAM + * + * + * + * @param[in] Address - BIOSRAM Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Read Data Buffer + * @param[in] StdHeader + * + */ +VOID +ReadBiosram ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + for (i = 0; i < OpFlag; i++) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD4, &Address, StdHeader); + Address++; + LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD5, (UINT8 *)Value + i, StdHeader); + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Write BIOSRAM + * + * + * + * @param[in] Address - BIOSRAM Offset value + * @param[in] OpFlag - Access sizes + * @param[in] Value - Write Data Buffer + * @param[in] StdHeader + * + */ +VOID +WriteBiosram ( + IN UINT8 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + OpFlag = 1 << (OpFlag - 1); + for (i = 0; i < OpFlag; i++) { + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD4, &Address, StdHeader); + Address++; + LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD5, (UINT8 *)Value + i, StdHeader); + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Record SMI Status + * + * + * @param[in] StdHeader + * + */ +VOID +RecordSmiStatus ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINTN Index; + UINT8 SwSmiValue; + + ACPIMMIO8 (0xfed80320) |= 0x01; + for ( Index = 0; Index < 20; Index++ ) { + ACPIMMIO8 (0xfed10020 + Index) = ACPIMMIO8 (0xfed80280 + Index); + } + LibAmdIoRead (AccessWidth8, 0xB0, &SwSmiValue, StdHeader); + ACPIMMIO8 (0xfed10040) = SwSmiValue; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Clear All SMI Status + * + * + * @param[in] StdHeader + * + */ +VOID +ClearAllSmiStatus ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINTN Index; + + for ( Index = 0; Index < 20; Index++ ) { + ACPIMMIO8 (0xfed80280 + Index) |= 0; + } +} diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchPeLib.c b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchPeLib.c new file mode 100644 index 0000000000..171ea0f3d0 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/FchPeLib.c @@ -0,0 +1,310 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH IO access common routine + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include "FchPlatform.h" +#define FILECODE PROC_FCH_COMMON_FCHPELIB_FILECODE + +/*----------------------------------------------------------------------------------------*/ +/** + * ProgramPciByteTable - Program PCI register by table (8 bits data) + * + * + * + * @param[in] pPciByteTable - Table data pointer + * @param[in] dwTableSize - Table length + * @param[in] StdHeader + * + */ +VOID +ProgramPciByteTable ( + IN REG8_MASK *pPciByteTable, + IN UINT16 dwTableSize, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + UINT8 dbBusNo; + UINT8 dbDevFnNo; + UINT8 Or8; + UINT8 Mask8; + PCI_ADDR PciAddress; + + dbBusNo = pPciByteTable->RegIndex; + dbDevFnNo = pPciByteTable->AndMask; + pPciByteTable++; + + for ( i = 1; i < dwTableSize; i++ ) { + if ( (pPciByteTable->RegIndex == 0xFF) && (pPciByteTable->AndMask == 0xFF) && (pPciByteTable->OrMask == 0xFF) ) { + pPciByteTable++; + dbBusNo = pPciByteTable->RegIndex; + dbDevFnNo = pPciByteTable->AndMask; + pPciByteTable++; + i++; + } else { + PciAddress.AddressValue = (dbBusNo << 20) + (dbDevFnNo << 12) + pPciByteTable->RegIndex; + Or8 = pPciByteTable->OrMask; + Mask8 = ~pPciByteTable->AndMask; + LibAmdPciRMW (AccessWidth8, PciAddress, &Or8, &Mask8, StdHeader); + pPciByteTable++; + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ProgramFchAcpiMmioTbl - Program FCH ACPI MMIO register by table (8 bits data) + * + * + * + * @param[in] pAcpiTbl - Table data pointer + * @param[in] StdHeader + * + */ +VOID +ProgramFchAcpiMmioTbl ( + IN ACPI_REG_WRITE *pAcpiTbl, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + UINT8 Or8; + UINT8 Mask8; + UINT32 ddtempVar; + + if (pAcpiTbl != NULL) { + if ((pAcpiTbl->MmioReg == 0) && (pAcpiTbl->MmioBase == 0) && (pAcpiTbl->DataAndMask == 0xB0) && (pAcpiTbl->DataOrMask == 0xAC)) { + // Signature Checking + pAcpiTbl++; + for ( i = 1; pAcpiTbl->MmioBase < 0x1D; i++ ) { + ddtempVar = ACPI_MMIO_BASE | (pAcpiTbl->MmioBase) << 8 | pAcpiTbl->MmioReg; + Or8 = pAcpiTbl->DataOrMask; + Mask8 = ~pAcpiTbl->DataAndMask; + LibAmdMemRMW (AccessWidth8, (UINT64) ddtempVar, &Or8, &Mask8, StdHeader); + pAcpiTbl++; + } + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ProgramFchSciMapTbl - Program FCH SCI Map table (8 bits data) + * + * + * + * @param[in] pSciMapTbl - Table data pointer + * @param[in] FchResetDataBlock + * + */ +VOID +ProgramFchSciMapTbl ( + IN SCI_MAP_CONTROL *pSciMapTbl, + IN FCH_RESET_DATA_BLOCK *FchResetDataBlock + ) +{ + AMD_CONFIG_PARAMS *StdHeader; + + UINT32 ddtempVar; + StdHeader = FchResetDataBlock->StdHeader; + + if (pSciMapTbl != NULL) { + while (pSciMapTbl->InputPin != 0xFF) { + if ((pSciMapTbl->InputPin >= 0x40) && (pSciMapTbl->InputPin < 0x80) && (pSciMapTbl->GpeMap < 0x20)) { + ddtempVar = ACPI_MMIO_BASE | SMI_BASE | pSciMapTbl->InputPin; + if (((pSciMapTbl->InputPin == FCH_SMI_xHC0Pme) && (FchResetDataBlock->FchReset.Xhci0Enable == 0)) || \ + ((pSciMapTbl->InputPin == FCH_SMI_xHC1Pme) && (FchResetDataBlock->FchReset.Xhci1Enable == 0))) { + } else { + LibAmdMemWrite (AccessWidth8, (UINT64) ddtempVar, &pSciMapTbl->GpeMap, StdHeader); + } + } else { + //Assert Warning "SCI map is invalid" + } + pSciMapTbl++; + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ProgramFchGpioTbl - Program FCH Gpio table (8 bits data) + * + * + * + * @param[in] pGpioTbl - Table data pointer + * + */ +VOID +ProgramFchGpioTbl ( + IN GPIO_CONTROL *pGpioTbl + ) +{ + if (pGpioTbl != NULL) { + while (pGpioTbl->GpioPin != 0xFF) { + ACPIMMIO8 (ACPI_MMIO_BASE | IOMUX_BASE | pGpioTbl->GpioPin) = (UINT8) (pGpioTbl->PinFunction); + ACPIMMIO8 (ACPI_MMIO_BASE + GPIO_BANK0_BASE + ((UINT32)pGpioTbl->GpioPin << 2) + 2) = (UINT8) (pGpioTbl->CfgByte); + pGpioTbl++; + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * ProgramSataPhyTbl - Program FCH Sata Phy table (8 bits data) + * + * + * + * @param[in] pSataPhyTbl - Table data pointer + * @param[in] FchResetDataBlock + * + */ +VOID +ProgramFchSataPhyTbl ( + IN SATA_PHY_CONTROL *pSataPhyTbl, + IN FCH_RESET_DATA_BLOCK *FchResetDataBlock + ) +{ + if (pSataPhyTbl != NULL) { + while (pSataPhyTbl->PhyData != 0xFFFFFFFF) { + //to be implemented + pSataPhyTbl++; + } + } +} + +/** + * GetChipSysMode - Get Chip status + * + * + * @param[in] Value - Return Chip strap status + * StrapStatus [15.0] - Hudson-2 chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + * @param[in] StdHeader + * + */ +VOID +GetChipSysMode ( + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + LibAmdMemRead (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80), Value, StdHeader); +} + +/** + * IsImcEnabled - Is IMC Enabled + * @retval TRUE for IMC Enabled; FALSE for IMC Disabled + */ +BOOLEAN +IsImcEnabled ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 dbSysConfig; + GetChipSysMode (&dbSysConfig, StdHeader); + if (dbSysConfig & ChipSysEcEnable) { + return TRUE; + } else { + return FALSE; + } +} + + +/** + * GetEfuseStatue - Get Efuse status + * + * + * @param[in] Value - Return Chip strap status + * @param[in] StdHeader + * + */ +VOID +GetEfuseStatus ( + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 Or8; + UINT8 Mask8; + + Or8 = BIT5; + Mask8 = BIT5; + LibAmdMemRMW (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGC8), &Or8, &Mask8, StdHeader); + LibAmdMemWrite (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD8), Value, StdHeader); + LibAmdMemRead (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD8 + 1), Value, StdHeader); + Or8 = 0; + Mask8 = BIT5; + LibAmdMemRMW (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGC8), &Or8, &Mask8, StdHeader); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * SbSleepTrapControl - SB Sleep Trap Control + * + * + * + * @param[in] SleepTrap - Whether sleep trap is enabled + * + */ +VOID +SbSleepTrapControl ( + IN BOOLEAN SleepTrap + ) +{ + if (SleepTrap) { + ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) &= ~(BIT2 + BIT3); + ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) |= BIT2; + + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGBE) &= ~ (BIT5); + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) &= ~ (BIT0 + BIT1); + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) |= BIT1; + } else { + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGBE) |= BIT5; + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) &= ~ (BIT0 + BIT1); + ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) |= BIT0; + + ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) &= ~(BIT2 + BIT3); + } +} diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/MemLib.c b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/MemLib.c new file mode 100644 index 0000000000..656f7689bb --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/MemLib.c @@ -0,0 +1,144 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH memory access lib + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include "FchPlatform.h" +#include "Ids.h" +#define FILECODE PROC_FCH_COMMON_MEMLIB_FILECODE + + +/** + * ReadMem - Read FCH BAR Memory + * + * @param[in] Address - Memory BAR address + * @param[in] OpFlag - Access width + * @param[in] *ValuePtr - In/Out value pointer + * + */ +VOID +ReadMem ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID *ValuePtr + ) +{ + OpFlag = OpFlag & 0x7f; + + switch ( OpFlag ) { + case AccessWidth8: + *((UINT8*)ValuePtr) = *((volatile UINT8*) ((UINTN)Address)); + break; + + case AccessWidth16: + *((UINT16*)ValuePtr) = *((volatile UINT16*) ((UINTN)Address)); + break; + + case AccessWidth32: + *((UINT32*)ValuePtr) = *((volatile UINT32*) ((UINTN)Address)); + break; + + default: + ASSERT (FALSE); + break; + } +} + +/** + * WriteMem - Write FCH BAR Memory + * + * @param[in] Address - Memory BAR address + * @param[in] OpFlag - Access width + * @param[in] *ValuePtr - In/Out Value pointer + * + */ +VOID +WriteMem ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID *ValuePtr + ) +{ + OpFlag = OpFlag & 0x7f; + + switch ( OpFlag ) { + case AccessWidth8 : + *((volatile UINT8*) ((UINTN)Address)) = *((UINT8*)ValuePtr); + break; + + case AccessWidth16: + *((volatile UINT16*) ((UINTN)Address)) = *((UINT16*)ValuePtr); + break; + + case AccessWidth32: + *((volatile UINT32*) ((UINTN)Address)) = *((UINT32*)ValuePtr); + break; + + default: + ASSERT (FALSE); + break; + } +} + +/** + * RwMem - Read & Write FCH BAR Memory + * + * @param[in] Address - Memory BAR address + * @param[in] OpFlag - Access width + * @param[in] Mask - Mask Value of data + * @param[in] Data - Write data + * + */ +VOID +RwMem ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + + ReadMem (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WriteMem (Address, OpFlag, &Result); + ReadMem (Address, OpFlag, &Result); +} + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/PciLib.c b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/PciLib.c new file mode 100644 index 0000000000..ed8bb81869 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Common/PciLib.c @@ -0,0 +1,93 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH PCI access lib + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include "FchPlatform.h" +#define FILECODE PROC_FCH_COMMON_PCILIB_FILECODE + +VOID +ReadPci ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + PCI_ADDR PciAddress; + + PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF); + LibAmdPciRead ((ACCESS_WIDTH) OpFlag, PciAddress, Value, StdHeader); +} + + +VOID +WritePci ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID *Value, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + PCI_ADDR PciAddress; + + PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF); + LibAmdPciWrite ((ACCESS_WIDTH) OpFlag, PciAddress, Value, StdHeader); +} + + +VOID +RwPci ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + PCI_ADDR PciAddress; + UINT32 rMask; + + PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF); + rMask = ~Mask; + LibAmdPciRMW ((ACCESS_WIDTH) OpFlag, PciAddress, &Data, &rMask, StdHeader); +} + + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Fch.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Fch.h new file mode 100644 index 0000000000..7576cad4dd --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Fch.h @@ -0,0 +1,2603 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH registers definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 314274 $ @e \$Date: 2015-03-08 03:53:49 -0500 (Sun, 08 Mar 2015) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#define FCH_REVISION "0.0.5.0" +#define FCH_ID "FCH_A05" +#define FCH_VERSION 0x0000 + +/** + * @page fchinitguide FCH implement phase in AGESA + * + * FCH provides below access to supported FCH service functions + * and data. + * - @subpage fchreset "FCH_INIT_RESET" + * - @subpage fchenv "FCH_INIT_ENV" + * - @subpage fchmid "FCH_INIT_MID" + * - @subpage fchlate "FCH_INIT_LATE" + * - @subpage fchs3early "FCH_INIT_S3_EARLY_RESTORE" + * - @subpage fchs3late "FCH_INIT_S3_LATE_RESTORE" + * - @subpage fchsmm "FCH_SMM_SERVICE" + * - @subpage fchsmmacpion "FCH_SMM_ACPION" + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchreset FCH_INIT_RESET + * @section FCH_INIT_RESET Interface Call + * @par + * Initialize structure referenced by FCH_RESET_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_RESET_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitReset (IN AMD_RESET_PARAMS *ResetParams); + * @subsection FCH_INIT_RESET_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_RESET_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgWatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgGecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgCpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchenv FCH_INIT_ENV + * @section FCH_INIT_ENV Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_ENV_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitEnv (IN AMD_ENV_PARAMS *EnvParams); + * @subsection FCH_INIT_ENV_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_ENV_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchmid FCH_INIT_MID + * @section FCH_INIT_MID Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_MID_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitMid (IN AMD_MID_PARAMS *MidParams); + * @subsection FCH_INIT_MID_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_MID_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchlate FCH_INIT_LATE + * @section FCH_INIT_LATE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_LATE_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitLate (IN FCH_DATA_BLOCK *LateParams); + * @subsection FCH_INIT_LATE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_LATE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3early FCH_INIT_S3_EARLY_RESTORE + * @section FCH_INIT_S3_EARLY_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_EARLY_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3late FCH_INIT_S3_LATE_RESTORE + * @section FCH_INIT_S3_LATE_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_LATE_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_LATE_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_LATE_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmm FCH_SMM_SERVICE + * @section FCH_SMM_SERVICE Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_SERVICE_CallIn Call Prototype + * @par + * FchSmmService ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_SERVICE_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_SERVICE --> 0x00010060 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_SERVICE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_SERVICE_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_SERVICE 0x00010060ul +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmmacpion FCH_SMM_ACPION + * @section FCH_SMM_ACPION Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_ACPION_CallIn Call Prototype + * @par + * FchSmmAcpiOn ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_ACPION_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_ACPION --> 0x00010061 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_ACPION_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_ACPION_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_ACPION 0x00010061ul + +#ifndef OEM_CALLBACK_BASE + #define OEM_CALLBACK_BASE 0x00010100ul +#endif + +//0x00 - 0x0F callback functions are reserved for bootblock +#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10 +#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT + * @section CB_SBGPP_RESET_ASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT + * @section CB_SBGPP_RESET_DEASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31 + +#define CFG_ADDR_PORT 0xCF8 +#define CFG_DATA_PORT 0xCFC + +#define ALINK_ACCESS_INDEX 0x0CD8 +#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4 + +/*------------------------------------------------------------------ +; I/O Base Address - Should be set by host BIOS +;------------------------------------------------------------------ */ +#define DELAY_PORT 0x0E0 + +#define FCH_8259_CONTROL_REG_MASTER 0x20 +#define FCH_8259_MASK_REG_MASTER 0x21 + +/*------------------------------------------------------------------ +; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display +;------------------------------------------------------------------ */ +// ASIC VendorID and DeviceIDs +#define ATI_VID 0x1002 +#define AMD_FCH_VID 0x1022 +#define FCH_DEVICE_ID 0x780B +#define FCH_SATA_VID AMD_FCH_VID // Dev 17 Func 0 +#define FCH_SATA_DID 0x7800 +#define FCH_SATA_AHCI_DID 0x7801 +#define FCH_SATA_RAID_DID 0x7802 +#define FCH_SATA_RAID5_DID 0x7803 +#define FCH_SATA_AMDAHCI_DID 0x7804 +#define FCH_SATA_RAID_DOTHILL_DID 0x7805 +#define FCH_SATA_RAID5_DOTHILL_DID 0x780A +#define FCH_USB_OHCI_VID AMD_FCH_VID // Dev 18 Func 0, Dev 19 Func 0 +#define FCH_USB_OHCI_DID 0x7807 +#define FCH_USB_EHCI_VID AMD_FCH_VID // Dev 18 Func 2, Dev 19 Func 2 +#define FCH_USB_EHCI_DID 0x7808 +#define FCH_USB_XHCI_VID AMD_FCH_VID // Dev 10 Func 0, Dev 10 Func 1 +#define FCH_USB_XHCI_DID 0x7812 +#define FCH_USB_XHCI_DID_BOLTON 0x7814 +#define FCH_USB_XHCI_DID_KABINI 0x7814 +#define FCH_SMBUS_VID AMD_FCH_VID // Dev 20 Func 0 +#define FCH_SMBUS_DID 0x780B +#define FCH_IDE_VID AMD_FCH_VID // Dev 20 Func 1 +#define FCH_IDE_DID 0x780C +#define FCH_AZALIA_VID AMD_FCH_VID // Dev 20 Func 2 +#define FCH_AZALIA_DID 0x157a +#define FCH_LPC_VID AMD_FCH_VID // Dev 20 Func 3 +#define FCH_LPC_DID 0x780E +#define FCH_PCIB_VID AMD_FCH_VID // Dev 20 Func 4 +#define FCH_PCIB_DID 0x780F +#define FCH_USB_OHCIF_VID AMD_FCH_VID // dev 20 Func 5 +#define FCH_USB_OHCIF_DID 0x7809 +#define FCH_NIC_VID 0x14E4 // Dev 20 Func 6 +#define FCH_NIC_DID 0x1699 +#define FCH_SD_VID AMD_FCH_VID // Dev 20 Func 7 +#define FCH_SD_DID 0x7806 + +//FCH Variant +#define FCH_Variant_EFUSE_LOCATION 0x1E // EFUSE bit 240-247 + +#define FCH_M2 0x01 +#define FCH_M3 0x03 +#define FCH_M3T 0x07 +#define FCH_D2 0x0F +#define FCH_D3 0x1F +#define FCH_D4 0x3F +#define FCH_BOLTON 0x15 +#define FCH_YANGTZE 0x39 +#define FCH_YANGTZEA1 0x3A +#define FCH_AVALONA0 0x41 +#define FCH_AVALONA1 0x42 +//Misc +#define R_FCH_ACPI_PM1_STATUS 0x00 +#define R_FCH_ACPI_PM1_ENABLE 0x02 +#define R_FCH_ACPI_PM_CONTROL 0x04 +#define R_FCH_ACPI_EVENT_STATUS 0x20 +#define R_FCH_ACPI_EVENT_ENABLE 0x24 +#define R_FCH_PM_ACPI_PMA_CNT_BLK_LO 0x2C + +// ACPI Sleep Type +#define ACPI_SLPTYP_S0 0 +#define ACPI_SLPTYP_S1 1 +#define ACPI_SLPTYP_S3 3 +#define ACPI_SLPTYP_S4 4 +#define ACPI_SLPTYP_S5 5 + +//#define SATA_BUS_DEV_FUN_FPGA 0x228 +#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0) +#define FCH_SATA1_BUS 0 +#define FCH_SATA1_DEV 17 +#define FCH_SATA1_FUNC 0 + +#define FC_BUS_DEV_FUN ((0x11 << 3) + 1) +#define FCH_XHCI_BUS 0 +#define FCH_XHCI_DEV 16 +#define FCH_XHCI_FUNC 0 +#define USB_XHCI_BUS_DEV_FUN ((FCH_XHCI_DEV << 3) + FCH_XHCI_FUNC) +#define FCH_XHCI1_BUS 0 +#define FCH_XHCI1_DEV 16 +#define FCH_XHCI1_FUNC 1 +#define USB_XHCI1_BUS_DEV_FUN ((FCH_XHCI1_DEV << 3) + FCH_XHCI1_FUNC) +#define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4 +#define FCH_OHCI1_BUS 0 +#define FCH_OHCI1_DEV 18 +#define FCH_OHCI1_FUNC 0 +#define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9 +#define FCH_OHCI2_BUS 0 +#define FCH_OHCI2_DEV 19 +#define FCH_OHCI2_FUNC 0 +#define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13 +#define FCH_OHCI3_BUS 0 +#define FCH_OHCI3_DEV 22 +#define FCH_OHCI3_FUNC 0 +#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4 +#define FCH_EHCI1_BUS 0 +#define FCH_EHCI1_DEV 18 +#define FCH_EHCI1_FUNC 2 +#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9 +#define FCH_EHCI2_BUS 0 +#define FCH_EHCI2_DEV 19 +#define FCH_EHCI2_FUNC 2 +#define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13 +#define FCH_EHCI3_BUS 0 +#define FCH_EHCI3_DEV 22 +#define FCH_EHCI3_FUNC 2 +#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0) +#define FCH_ISA_BUS 0 +#define FCH_ISA_DEV 20 +#define FCH_ISA_FUNC 0 +#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1) +#define FCH_IDE_BUS 0 +#define FCH_IDE_DEV 20 +#define FCH_IDE_FUNC 1 +#define AZALIA_BUS_DEV_FUN ((0x9 << 3) + 2) +#define FCH_AZALIA_BUS 0 +#define FCH_AZALIA_DEV 9 +#define FCH_AZALIA_FUNC 2 +#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3) +#define FCH_LPC_BUS 0 +#define FCH_LPC_DEV 20 +#define FCH_LPC_FUNC 3 +#define PCIB_BUS_DEV_FUN ((0x14 << 3) + 4) // P2P in SB700 +#define FCH_PCI_BUS 0 +#define FCH_PCI_DEV 20 +#define FCH_PCI_FUNC 4 +#define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1 +#define FCH_OHCI4_BUS 0 +#define FCH_OHCI4_DEV 20 +#define FCH_OHCI4_FUNC 5 +//Gigabyte Ethernet Controller +#define GEC_BUS_DEV_FUN ((0x14 << 3) + 6) +#define FCH_GBEC_BUS 0 +#define FCH_GBEC_DEV 20 +#define FCH_GBEC_FUNC 6 + +#define SD_BUS_DEV_FUN ((0x14 << 3) + 7) // SD Controller +#define SD_PCI_BUS 0 +#define SD_PCI_DEV 20 +#define SD_PCI_FUNC 7 + + +#define FCH_GPP_BUS 0 +#define FCH_GPP_DEV 21 +#define FCH_GPP_FUNC 0 +#define GPP0_BUS_DEV_FUN ((0x15 << 3) + 0) // GPP P2P bridge PORT0 +#define GPP1_BUS_DEV_FUN ((0x15 << 3) + 1) // GPP P2P bridge PORT1 +#define GPP2_BUS_DEV_FUN ((0x15 << 3) + 2) // GPP P2P bridge PORT2 +#define GPP3_BUS_DEV_FUN ((0x15 << 3) + 3) // GPP P2P bridge PORT3 + +#define ACPI_MMIO_BASE 0xFED80000ul +#define FCH_CFG_BASE 0x000 // DWORD +#define GPIO_BASE 0x100 // BYTE +#define SMI_BASE 0x200 // DWORD +#define PMIO_BASE 0x300 // DWORD +#define PMIO2_BASE 0x400 // BYTE +#define BIOS_RAM_BASE 0x500 // BYTE +#define CMOS_RAM_BASE 0x600 // BYTE +#define CMOS_BASE 0x700 // BYTE +#define ASF_BASE 0x900 // DWORD +#define SMBUS_BASE 0xA00 // DWORD +#define WATCHDOG_BASE 0xB00 // +#define HPET_BASE 0xC00 // DWORD +#define IOMUX_BASE 0xD00 // BYTE +#define MISC_BASE 0xE00 +#define SERIAL_DEBUG_BASE 0x1000 +#define GFX_DAC_BASE 0x1400 +#define GPIO_BANK0_BASE 0x1500 // DWORD +//#define GPIO_BANK1_BASE 0x1600 // DWORD +//#define GPIO_BANK2_BASE 0x1700 // DWORD +#define CEC_BASE 0x1800 +#define XHCI_BASE 0x1C00 +#define ACDC_BASE 0x1D00 +#define AOAC_BASE 0x1E00 + + +// Chip type definition +#define CHIPTYPE_HUDSON2 (1 << 0) +#define CHIPTYPE_YUBA (1 << 1) + +// +// ROM SIG type definition +// +#define NUM_OF_ROMSIG_FILED 0x04 +#define XHCI_FILED_NUM 0x03 +#define ROMSIG_CFG_MASK 0x07 +#define XHCI_BOOT_RAM_OFFSET 0x8000 +#define INSTRUCTION_RAM_SIG 0x55AA +#define ROMSIG_SIG 0x55AA55AAul + +// RegSpace field (AB_INDEX[31:29] +#define AXINDC 0 // AXINDC +#define AXINDP 2 // AXINDP +#define ABCFG 6 // ABCFG +#define AXCFG 4 // AXCFG +#define RCINDXC 1 // PCIEIND +#define RCINDXP 3 // PCIEIND_P + +#define GPP_DEV_NUM 21 // +#define MAX_GPP_PORTS 4 + +#define PCIE_FORCE_GEN1_EFUSE_LOCATION 0x14 // EFUSE bit 160 +// +// ABCFG Registers +// +#define FCH_ABCFG_REG00 0x00 // VENDOR ID +#define FCH_ABCFG_REG08 0x08 // REVISION ID +#define FCH_ABCFG_REG40 0x40 // BL_EVENTCNT0LO +#define FCH_ABCFG_REG44 0x44 // BL_EVENTCNT1LO +#define FCH_ABCFG_REG48 0x48 // BL_EVENTCNTSEL +#define FCH_ABCFG_REG4A 0x4A // BL_EVENTCNT0HI +#define FCH_ABCFG_REG4B 0x4B // BL_EVENTCNT1HI +#define FCH_ABCFG_REG4C 0x4C // BL_EVENTCNTCTL +#define FCH_ABCFG_REG50 0x50 // MISCCTL_50 +#define FCH_ABCFG_REG54 0x54 // MISCCTL_54 +#define FCH_ABCFG_REG58 0x58 // BL RAB CONTROL + +#define FCH_ABCFG_REG60 0x60 // LINKWIDTH_CTL +#define FCH_ABCFG_REG64 0x64 // LINKWIDTH_UP_INTERVAL +#define FCH_ABCFG_REG68 0x68 // LINKWIDTH_DN_INVERVAL +#define FCH_ABCFG_REG6C 0x6C // LINKWIDTH_UPSTREAM_DWORDS +#define FCH_ABCFG_REG70 0x70 // LINKWIDTH_DOWNSTREAM_DWORDS +#define FCH_ABCFG_REG74 0x74 // LINKWIDTH_THRESHOLD_INCREASE +#define FCH_ABCFG_REG78 0x78 // LINKWIDTH_THRESHOLD_DECREASE + +#define FCH_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG88 0x88 // +#define FCH_ABCFG_REG8C 0x8C // +#define FCH_ABCFG_REG90 0x90 // BIF CONTROL 0 +#define FCH_ABCFG_REG94 0x94 // MSI CONTROL +#define FCH_ABCFG_REG98 0x98 // BIF CONTROL 1 +#define FCH_ABCFG_REG9C 0x9C // MISCCTL_9C +#define FCH_ABCFG_REGA0 0xA0 // BIF PHY CONTROL ENABLE +#define FCH_ABCFG_REGA4 0xA4 // BIF PHY CONTROL A4 +#define FCH_ABCFG_REGA8 0xA8 // BIF PHY CONTROL A8 +#define FCH_ABCFG_REGB0 0xB0 // HYPERFLASH-PCIE PORT MAPPING +#define FCH_ABCFG_REGB8 0xB8 // +#define FCH_ABCFG_REGB4 0xB4 // +#define FCH_ABCFG_REGBC 0xBC // +#define FCH_ABCFG_REGC0 0xC0 // PCIE_GPP_ENABLE +#define FCH_ABCFG_REGC4 0xC4 // PCIE_P2P_INT_MAP +#define FCH_ABCFG_REGD0 0xD0 // MCTP_VDM_TX_FIFO_DATA +#define FCH_ABCFG_REGD4 0xD4 // MCTP_VMD_TX_CONTROL +#define FCH_ABCFG_REGE0 0xE0 // MCTP_VDM_RX_FIFO_DATA +#define FCH_ABCFG_REGE4 0xE4 // MCTP_VDM_RX_FIFO_STATUS +#define FCH_ABCFG_REGEC 0xEC // MCTP_VDM_CONTROL +#define FCH_ABCFG_REGF0 0xF0 // GPP_UPSTREAM_CONTROL +#define FCH_ABCFG_REGF4 0xF4 // GPP_SYSTEM_ERROR_CONTROL +#define FCH_ABCFG_REGFC 0xFC // FCH_TRAP_CONTROL +#define FCH_ABCFG_REG100 0x100 // FCH_TRAP0_ADDRL +#define FCH_ABCFG_REG104 0x104 // FCH_TRAP0_ADDRH +#define FCH_ABCFG_REG108 0x108 // FCH_TRAP0_CMD +#define FCH_ABCFG_REG10C 0x10C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG110 0x110 // FCH_TRAP1_ADDRL +#define FCH_ABCFG_REG114 0x114 // FCH_TRAP1_ADDRH +#define FCH_ABCFG_REG118 0x118 // FCH_TRAP1_CMD +#define FCH_ABCFG_REG11C 0x11C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG120 0x120 // FCH_TRAP2_ADDRL +#define FCH_ABCFG_REG124 0x124 // FCH_TRAP2_ADDRH +#define FCH_ABCFG_REG128 0x128 // FCH_TRAP2_CMD +#define FCH_ABCFG_REG12C 0x12C // FCH_TRAP2_DATA +#define FCH_ABCFG_REG130 0x130 // FCH_TRAP3_ADDRL +#define FCH_ABCFG_REG134 0x134 // FCH_TRAP3_ADDRH +#define FCH_ABCFG_REG138 0x138 // FCH_TRAP3_CMD +#define FCH_ABCFG_REG13C 0x13C // FCH_TRAP3_DATA +#define FCH_ABCFG_REG180 0x180 // FCH_DMA_TRAFFIC_CONTROL +#define FCH_ABCFG_REG184 0x184 // FCH_AXI_DMA_MEMORY_POWER_SAVING +#define FCH_ABCFG_REG208 0x208 // SBG_MISC +#define FCH_ABCFG_REG300 0x300 // MCTP_VDM_RX_SMI_CONTROL +#define FCH_ABCFG_REG310 0x310 // BIF_GPP_STRAP_SYSTEM_0 +#define FCH_ABCFG_REG314 0x314 // BIF_GPP_STRAP_SYSTEM_1 +#define FCH_ABCFG_REG31C 0x31C // BIF_GPP_STRAP_LINK_CONTROL_0 +#define FCH_ABCFG_REG320 0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A +#define FCH_ABCFG_REG324 0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B +#define FCH_ABCFG_REG328 0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C +#define FCH_ABCFG_REG32C 0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D +#define FCH_ABCFG_REG330 0x330 // BIF_GPP_STRAP_BIF_0 +#define FCH_ABCFG_REG334 0x334 // BIF_GPP_STRAP_BIF_1 +#define FCH_ABCFG_REG338 0x338 // BIF_GPP_STRAP_BIF_2 +#define FCH_ABCFG_REG340 0x340 // BIF_GPP_STRAP_BIF_LANE_A +#define FCH_ABCFG_REG344 0x344 // BIF_GPP_STRAP_BIF_LANE_B +#define FCH_ABCFG_REG348 0x348 // BIF_GPP_STRAP_BIF_LANE_C +#define FCH_ABCFG_REG34C 0x34C // BIF_GPP_STRAP_BIF_LANE_D +#define FCH_ABCFG_REG350 0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0 +#define FCH_ABCFG_REG354 0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1 +#define FCH_ABCFG_REG404 0x404 // GPP0_SHADOW_COMMAND +#define FCH_ABCFG_REG418 0x418 // GPP0_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG41C 0x41C // GPP0_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG420 0x420 // GPP0_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG424 0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG428 0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG42C 0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG430 0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG43C 0x43C // GPP0_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG444 0x444 // GPP1_SHADOW_COMMAND +#define FCH_ABCFG_REG458 0x458 // GPP1_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG45C 0x45C // GPP1_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG460 0x460 // GPP1_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG464 0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG468 0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG46C 0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG470 0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG47C 0x47C // GPP1_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG484 0x484 // GPP2_SHADOW_COMMAND +#define FCH_ABCFG_REG498 0x498 // GPP2_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG49C 0x49C // GPP2_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4A0 0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A4 0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A8 0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4AC 0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4B0 0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4BC 0x4BC // GPP2_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG4C4 0x4C4 // GPP3_SHADOW_COMMAND +#define FCH_ABCFG_REG4D8 0x4D8 // GPP3_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG4DC 0x4DC // GPP3_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4E0 0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E4 0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E8 0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4EC 0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4F0 0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4FC 0x4FC // GPP3_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG10040 0x10040ul // AL_EVENTCNT0LO +#define FCH_ABCFG_REG10044 0x10044ul // AL_EVENTCNT1LO +#define FCH_ABCFG_REG10048 0x10048ul // AL_EVENTCNTSEL +#define FCH_ABCFG_REG1004A 0x1004Aul // AL_EVENTCNT0HI +#define FCH_ABCFG_REG1004B 0x1004Bul // AL_EVENTCNT1HI +#define FCH_ABCFG_REG1004C 0x1004Cul // AL_EVENTCNTCTL +#define FCH_ABCFG_REG10050 0x10050ul // MISCCTL_10050 +#define FCH_ABCFG_REG10054 0x10054ul // AL_ARB_CTL +#define FCH_ABCFG_REG10056 0x10056ul // AL_CLK_CTL +#define FCH_ABCFG_REG10058 0x10058ul // AL RAB CONTROL +#define FCH_ABCFG_REG1005C 0x1005Cul // AL MLT CONTROL +#define FCH_ABCFG_REG10060 0x10060ul // AL DMA PREFETCH ENABLE +#define FCH_ABCFG_REG10064 0x10064ul // AL DMA PREFETCH FLUSH CONTROL +#define FCH_ABCFG_REG10068 0x10068ul // AL PREFETCH LIMIT +#define FCH_ABCFG_REG1006C 0x1006Cul // AL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG10070 0x10070ul // MISCCTL_10070 +#define FCH_ABCFG_REG10080 0x10080ul // CLKMUXSTATUS +#define FCH_ABCFG_REG10090 0x10090ul // BIF CONTROL 0 +#define FCH_ABCFG_REG1009C 0x1009Cul // MISCCTL_1009C + +// +// RCINDX_P Registers +// +#define FCH_RCINDXP_REG01 0x01 | RCINDXP << 29 // PCIEP_SCRATCH +#define FCH_RCINDXP_REG02 0x02 | RCINDXP << 29 // +#define FCH_RCINDXP_REG10 0x10 | RCINDXP << 29 // +#define FCH_RCINDXP_REG20 0x20 | RCINDXP << 29 // PCIE_TX_CNTL +#define FCH_RCINDXP_REG21 0x21 | RCINDXP << 29 // PCIE_TX_REQUESTER_ID +#define FCH_RCINDXP_REG50 0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS +#define FCH_RCINDXP_REG6A 0x6A | RCINDXP << 29 // +#define FCH_RCINDXP_REG70 0x70 | RCINDXP << 29 // PCIE_RX_CNTL +#define FCH_RCINDXP_REGA0 0xA0 | RCINDXP << 29 // PCIE_LC_CNTL +#define FCH_RCINDXP_REGA1 0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL +#define FCH_RCINDXP_REGA2 0xA2 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA4 0xA4 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA5 0xA5 | RCINDXP << 29 // PCIE_LC_STATE0 +#define FCH_RCINDXP_REGC0 0xC0 | RCINDXP << 29 // + +// +// RCINDX_C Registers +// +#define FCH_RCINDXC_REG02 0x02 | RCINDXC << 29 // PCIE_HW_DEBUG +#define FCH_RCINDXC_REG10 0x10 | RCINDXC << 29 // PCIE_CNTL +#define FCH_RCINDXC_REG40 0x40 | RCINDXC << 29 // PCIE_P_CNTL +#define FCH_RCINDXC_REG65 0x65 | RCINDXC << 29 // PCIE_P_PAD_FORCE_DIS +#define FCH_RCINDXC_REGC0 0xC0 | RCINDXC << 29 // PCIE_STRAP_MISC +#define FCH_RCINDXC_REGC1 0xC1 | RCINDXC << 29 // PCIE_STRAP_MISC2 + + +// +// AXINDC Registers +// +#define FCH_AX_INDXC_REG02 0x02 // PCIEP_HW_DEBUG +#define FCH_AX_INDXC_REG10 0x10 +#define FCH_AX_INDXC_REG30 0x30 +#define FCH_AX_DATAC_REG34 0x34 +#define FCH_AX_INDXP_REG38 0x38 +#define FCH_AX_DATAP_REG3C 0x3C +#define FCH_AX_INDXC_REG40 0x40 | AXINDC << 29 +#define FCH_AX_INDXC_REGA4 0xA4 | AXINDC << 29 + +#define FCH_AX_INDXP_REG02 0x02 | AXINDP << 29 +#define FCH_AX_INDXP_REGA0 0xA0 | AXINDP << 29 +#define FCH_AX_INDXP_REGA4 0xA4 | AXINDP << 29 +#define FCH_AX_INDXP_REGB1 0xB1 | AXINDP << 29 + +#define FCH_AX_CFG_REG68 0x68 | AXCFG << 29 +#define FCH_AX_CFG_REG88 0x88 | AXCFG << 29 + +#define FCH_AB_REG04 0x04 +#define FCH_AB_REG40 0x40 + +//Sata Port Configuration +#define SIX_PORTS 0 +#define FOUR_PORTS 1 + +#define SATA_EFUSE_LOCATION 0x10 // EFUSE bit 133 +#define SATA_DH_EFUSE_LOCATION 0x11 // EFUSE bit 138 +#define SATA_FIS_BASE_EFUSE_LOC 0x15 // EFUSE bit 169 +#define SATA_EFUSE_BIT 0x20 // +#define SATA_DH_EFUSE_BIT 0x04 // +#define FCH_SATA_REG00 0x000 // Vendor ID - R- 16 bits +#define FCH_SATA_REG02 0x002 // Device ID - RW -16 bits +#define FCH_SATA_REG04 0x004 // PCI Command - RW - 16 bits +#define FCH_SATA_REG06 0x006 // PCI Status - RW - 16 bits +#define FCH_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08 +#define FCH_SATA_REG0C 0x00C // Cache Line Size - R/W - 8bits +#define FCH_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits +#define FCH_SATA_REG0E 0x00E // Header Type - R - 8 bits +#define FCH_SATA_REG0F 0x00F // BIST - R - 8 bits +#define FCH_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits +#define FCH_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits +#define FCH_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits +#define FCH_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits +#define FCH_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits +#define FCH_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits +#define FCH_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits +#define FCH_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits +#define FCH_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits +#define FCH_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits +#define FCH_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits +#define FCH_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits +#define FCH_SATA_REG3E 0x03E // Min Grant - R - 8 bits +#define FCH_SATA_REG3F 0x03F // Max Latency - R - 8 bits +#define FCH_SATA_REG40 0x040 // Configuration - RW - 32 bits +#define FCH_SATA_REG44 0x044 // Software Data Register - RW - 32 bits +#define FCH_SATA_REG48 0x048 +#define FCH_SATA_REG4C 0x04C +#define FCH_SATA_REG50 0x050 // Message Capability - R - 16 bits +#define FCH_SATA_REG52 0x052 // Message Control - R/W - 16 bits +#define FCH_SATA_REG54 0x054 // Message Address - R/W - 32 bits +#define FCH_SATA_REG58 0x058 // Message Data - R/W - 16 bits +#define FCH_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits +#define FCH_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits +#define FCH_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits +#define FCH_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits +#define FCH_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits +#define FCH_SATA_REG68 0x068 // MSI Program - R/W - 8 bits +#define FCH_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits +#define FCH_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits +#define FCH_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_REG86 0x086 // PY Global Control +#define FCH_SATA_REG87 0x087 +#define FCH_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8A 0x08A +#define FCH_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8E 0x08E +#define FCH_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG92 0x092 +#define FCH_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG96 0x096 +#define FCH_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_REGA0 0x0A0 // +#define FCH_SATA_REGA4 0x0A4 // +#define FCH_SATA_REGA5 0x0A5 //; +#define FCH_SATA_REGA8 0x0A8 // +#define FCH_SATA_REGAD 0x0AD //; +#define FCH_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_REGB5 0x0B5 //; +#define FCH_SATA_REGBD 0x0BD //; +#define FCH_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits +#define FCH_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits + +#define FCH_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG1C 0x01C +#define FCH_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits +#define FCH_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits +#define FCH_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits +#define FCH_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits +#define FCH_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits +#define FCH_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits +#define FCH_SATA_BAR5_REG8C 0x08C // IDE0 Read Data - RW - 32 bits +#define FCH_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits +#define FCH_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits +#define FCH_SATA_BAR5_REGCC 0x0CC // Read/Write Data - RW - 32 bits +#define FCH_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REGF8 0x0F8 // PORT Configuration +#define FCH_SATA_BAR5_REGFC 0x0FC +#define FCH_SATA_BAR5_REG100 0x0100 // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180 +#define FCH_SATA_BAR5_REG104 0x0104 // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel +#define FCH_SATA_BAR5_REG108 0x0108 // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel +#define FCH_SATA_BAR5_REG10C 0x010C // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel +#define FCH_SATA_BAR5_REG144 0x0144 // Serial ATA PY Configuration - RW - 32 bits +#define FCH_SATA_BAR5_REG148 0x0148 // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)] +#define FCH_SATA_BAR5_REG14C 0x014C // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)] +#define FCH_SATA_BAR5_REG120 0x0120 // +#define FCH_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status +#define FCH_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control +#define FCH_SATA_BAR5_REG130 0x0130 +#define FCH_SATA_BAR5_REG1B0 0x01B0 +#define FCH_SATA_BAR5_REG230 0x0230 +#define FCH_SATA_BAR5_REG2B0 0x02B0 +#define FCH_SATA_BAR5_REG330 0x0330 +#define FCH_SATA_BAR5_REG3B0 0x03B0 +#define FCH_SATA_BAR5_REG430 0x0430 +#define FCH_SATA_BAR5_REG4B0 0x04B0 + + +// USB ports +#define NUM_USB1_PORTS 5 +#define NUM_USB2_PORTS 5 +#define NUM_USB3_PORTS 4 +#define NUM_USB4_PORTS 2 +#define NUM_XHC0_PORTS 2 +#define NUM_XHC1_PORTS 2 + + +// +// USB OHCI Device 0x7807 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0 +// Device 20 (0x14) Func 5 (FL) 0x7809 +// +#define FCH_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002ul) +#define FCH_OHCI_REG04 0x04 // Command - RW +#define FCH_OHCI_REG06 0x06 // Status - R +#define FCH_OHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_OHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_OHCI_REG10 0x10 // Bar_OCI - RW +#define FCH_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW +#define FCH_OHCI_REG34 0x34 // Capability Pointer - R +#define FCH_OHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_OHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_OHCI_REG40 0x40 // Config Timers - RW +#define FCH_OHCI_REG42 0x42 // Port Disable Control - RW (800) +#define FCH_OHCI_REG46 0x46 // USB PHY Battery Charger - RW (800) +#define FCH_OHCI_REG48 0x48 // Port Force Reset - RW (800) +#define FCH_OHCI_REG4C 0x4C // MSI - RW (800) +#define FCH_OHCI_REG50 0x50 // Misc Control - RW +#define FCH_OHCI_REG51 0x51 +#define FCH_OHCI_REG52 0x52 +#define FCH_OHCI_REG58 0x58 // Over Current Control - RW +#define FCH_OHCI_REG5C 0x5C // Over Current Control - RW +#define FCH_OHCI_REG60 0x60 // Serial Bus Release Number - RW +#define FCH_OHCI_REG68 0x68 // Over Current PME Enable - RW +#define FCH_OHCI_REG74 0x74 // Target Timeout Control - RW +#define FCH_OHCI_REG80 0x80 // +#define FCH_OHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_OHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_OHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_OHCI_REGE4 0x0E4 // HT MSI Support +#define FCH_OHCI_REGF0 0x0F0 // Function Level Reset Capability +#define FCH_OHCI_REGF4 0x0F4 // Function Level Reset Control + +#define FCH_OHCI_BAR_REG00 0x00 // cRevision - R +#define FCH_OHCI_BAR_REG04 0x04 // cControl +#define FCH_OHCI_BAR_REG08 0x08 // cCommandStatus +#define FCH_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW +#define FCH_OHCI_BAR_REG10 0x10 // cInterruptEnable +#define FCH_OHCI_BAR_REG14 0x14 // cInterruptDisable +#define FCH_OHCI_BAR_REG18 0x18 // HcCCA +#define FCH_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED +#define FCH_OHCI_BAR_REG20 0x20 // HcControleadED +#define FCH_OHCI_BAR_REG24 0x24 // cControlCurrentED RW +#define FCH_OHCI_BAR_REG28 0x28 // HcBulkeadED +#define FCH_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW +#define FCH_OHCI_BAR_REG30 0x30 // HcDoneead +#define FCH_OHCI_BAR_REG34 0x34 // cFmInterval +#define FCH_OHCI_BAR_REG38 0x38 // cFmRemaining +#define FCH_OHCI_BAR_REG3C 0x3C // cFmNumber +#define FCH_OHCI_BAR_REG40 0x40 // cPeriodicStart +#define FCH_OHCI_BAR_REG44 0x44 // HcLSThresold +#define FCH_OHCI_BAR_REG48 0x48 // HcRDescriptorA +#define FCH_OHCI_BAR_REG4C 0x4C // HcRDescriptorB +#define FCH_OHCI_BAR_REG50 0x50 // HcRStatus +#define FCH_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800) +#define FCH_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800) +#define FCH_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800) + +#define FCH_OHCI_PORTSC_CCS 0x1 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PES 0x2 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PSS 0x4 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PPS 0x100 // HcRhPortStatus +#define FCH_OHCI_PORTSC_LSDA 0x200 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PRS 0x10 // HcRhPortStatus + +// +// USB EHCI Device 0x7808 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2 +// +#define FCH_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_EHCI_REG04 0x04 // Command - RW +#define FCH_EHCI_REG06 0x06 // Status - R +#define FCH_EHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_EHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_EHCI_REG10 0x10 // BAR - RW +#define FCH_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW +#define FCH_EHCI_REG34 0x34 // Capability Pointer - R +#define FCH_EHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_EHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_EHCI_REG40 0x40 // Config Timers - RW +#define FCH_EHCI_REG4C 0x4C // MSI - RW +#define FCH_EHCI_REG50 0x50 // EHCI Misc Control - RW +#define FCH_EHCI_REG54 0x54 // EHCI Misc Control - RW +#define FCH_EHCI_REG60 0x60 // SBRN - R +#define FCH_EHCI_REG61 0x61 // FLADJ - RW +#define FCH_EHCI_REG62 0x62 // PORTWAKECAP - RW +#define FCH_EHCI_REG64 0x64 // Misc Control 2 - RW +#define FCH_EHCI_REG70 0x70 // Over Current Control - RW +#define FCH_EHCI_REG74 0x74 // EHCI Misc Control2 - RW +#define FCH_EHCI_REG84 0x84 // HUB Configure 1 - RW +#define FCH_EHCI_REG88 0x88 // - RW +#define FCH_EHCI_REG90 0x90 // HUB Configure 4 - RW +#define FCH_EHCI_REGA0 0xA0 // +#define FCH_EHCI_REGA4 0xA4 // +#define FCH_EHCI_REGC0 0x0C0 // PME control - RW (800) +#define FCH_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800) +#define FCH_EHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_EHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_EHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_EHCI_REGE4 0x0E4 // EHCI Debug Port Support - RW (800) +#define FCH_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800) +#define FCH_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800) + +#define FCH_EHCI_BAR_REG00 0x00 // CAPLENGT - R +#define FCH_EHCI_BAR_REG02 0x002 // CIVERSION- R +#define FCH_EHCI_BAR_REG04 0x004 // CSPARAMS - R +#define FCH_EHCI_BAR_REG08 0x008 // CCPARAMS - R +#define FCH_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R + +#define FCH_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits +#define FCH_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits +#define FCH_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits +#define FCH_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits +#define FCH_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits +#define FCH_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits +#define FCH_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits +#define FCH_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits +#define FCH_EHCI_BAR_REG64 0x064 // PORTSC (1-N_PORTS) -RW - 32 bits +#define FCH_EHCI_BAR_REGA0 0x0A0 // DebugPort MISC Control - RW - 32 bits (800) +#define FCH_EHCI_BAR_REGA4 0x0A4 // Packet Buffer Threshold Values - RW - 32 bits +#define FCH_EHCI_BAR_REGA8 0x0A8 // USB PHY Status 0 - R +#define FCH_EHCI_BAR_REGAC 0x0AC // USB PHY Status 1 - R +#define FCH_EHCI_BAR_REGB0 0x0B0 // USB PHY Status 2 - R +#define FCH_EHCI_BAR_REGB4 0x0B4 // UTMI Control - RW (800) +#define FCH_EHCI_BAR_REGB8 0x0B8 // Loopback Test +#define FCH_EHCI_BAR_REGBC 0x0BC // EHCI MISC Control +#define FCH_EHCI_BAR_REGC0 0x0C0 // USB PHY Calibration +#define FCH_EHCI_BAR_REGC4 0x0C4 // USB Common PHY Control +#define FCH_EHCI_BAR_REGC8 0x0C8 // EHCI Debug Purpose +#define FCH_EHCI_BAR_REGCC 0x0CC // Ehci Spare 1 (800) ** +#define FCH_EHCI_BAR_REGD0 0x0D0 +#define FCH_EHCI_BAR_REGD4 0x0D4 +#define FCH_EHCI_BAR_REGDC 0x0DC +#define FCH_EHCI_BAR_REG100 0x100 // USB debug port + +// +// USB XHCI Device 0x7812/0x7814 +// Device 16 (0x10) Func 0/1 +// +#define FCH_XHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_XHCI_REG04 0x04 // Command - RW +#define FCH_XHCI_REG10 0x10 // Bar0 +#define FCH_XHCI_REG2C 0x2C // Sub System ID +#define FCH_XHCI_REG40 0x40 // Index0 +#define FCH_XHCI_REG44 0x44 // Data0 +#define FCH_XHCI_REG48 0x48 // Index1 +#define FCH_XHCI_REG4C 0x4C // Data0 +#define FCH_XHCI_REG54 0x54 // PME Control/Status +#define XHCI_EFUSE_LOCATION 0x18 // EFUSE bit 192, 193 + +#define FCH_XHCI_BAR_REG420 0x420 // Port Status and Control +#define FCH_XHCI_PORTSC_CCS 0x1 // Port Status and Control +#define FCH_XHCI_PORTSC_PED 0x2 // Port Status and Control +#define FCH_XHCI_PORTSC_PLS 0x1E0 // Port Status and Control +#define FCH_XHCI_PORTSC_SPEED 0x3C00 // Port Status and Control +#define FCH_XHCI_PORTSC_PR 0x10 // Port Status and Control + +// +// FCH CFG device 0x780B +// Device 20 (0x14) Func 0 +// +#define FCH_CFG_REG00 0x000 // VendorID - R +#define FCH_CFG_REG02 0x002 // DeviceID - R +#define FCH_CFG_REG04 0x004 // Command- RW +#define FCH_CFG_REG05 0x005 // Command- RW +#define FCH_CFG_REG06 0x006 // STATUS- RW +#define FCH_CFG_REG08 0x008 // Revision ID/Class Code- R +#define FCH_CFG_REG0A 0x00A // +#define FCH_CFG_REG0B 0x00B // +#define FCH_CFG_REG0C 0x00C // Cache Line Size- R +#define FCH_CFG_REG0D 0x00D // Latency Timer- R +#define FCH_CFG_REG0E 0x00E // Header Type- R +#define FCH_CFG_REG0F 0x00F // BIST- R +#define FCH_CFG_REG10 0x010 // Base Address 0- R +#define FCH_CFG_REG11 0x011 //; +#define FCH_CFG_REG12 0x012 //; +#define FCH_CFG_REG13 0x013 //; +#define FCH_CFG_REG14 0x014 // Base Address 1- R +#define FCH_CFG_REG18 0x018 // Base Address 2- R +#define FCH_CFG_REG1C 0x01C // Base Address 3- R +#define FCH_CFG_REG20 0x020 // Base Address 4- R +#define FCH_CFG_REG24 0x024 // Base Address 5- R +#define FCH_CFG_REG28 0x028 // Cardbus CIS Pointer- R +#define FCH_CFG_REG2C 0x02C // Subsystem Vendor ID- W +#define FCH_CFG_REG2E 0x02E // Subsystem ID- W +#define FCH_CFG_REG30 0x030 // Expansion ROM Base Address - R +#define FCH_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00 +#define FCH_CFG_REG3C 0x03C // Interrupt Line - R +#define FCH_CFG_REG3D 0x03D // Interrupt Pin - R +#define FCH_CFG_REG3E 0x03E // Min_Gnt - R +#define FCH_CFG_REG3F 0x03F // Max_Lat - R +#define FCH_CFG_REG90 0x090 // Smbus Base Address - R +#define FCH_CFG_REG9C 0x09C // SBResourceMMIO_BASE + +// +// FCH SATA IDE device +// Device 20 (0x14) Func 1 +// + +#define FCH_IDE_REG00 0x00 // Vendor ID +#define FCH_IDE_REG02 0x02 // Device ID +#define FCH_IDE_REG04 0x04 // Command +#define FCH_IDE_REG06 0x06 // Status +#define FCH_IDE_REG08 0x08 // Revision ID/Class Code +#define FCH_IDE_REG09 0x09 // Class Code +#define FCH_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID +#define FCH_IDE_REG40 0x40 // Configuration - RW - 32 bits +#define FCH_IDE_REG34 0x34 +#define FCH_IDE_REG62 0x62 // IDE Internal Control +#define FCH_IDE_REG63 0x63 // IDE Internal Control +// +// FCH AZALIA device 0x780D +// Device 20 (0x14) Func 2 +// +#define ATI_AZALIA_ExtBlk_Addr 0x0F8 +#define ATI_AZALIA_ExtBlk_DATA 0x0FC + +#define FCH_AZ_REG00 0x00 // Vendor ID - R +#define FCH_AZ_REG02 0x02 // Device ID - R/W +#define FCH_AZ_REG04 0x04 // PCI Command +#define FCH_AZ_REG06 0x06 // PCI Status - R/W +#define FCH_AZ_REG08 0x08 // Revision ID +#define FCH_AZ_REG09 0x09 // Programming Interface +#define FCH_AZ_REG0A 0x0A // Sub Class Code +#define FCH_AZ_REG0B 0x0B // Base Class Code +#define FCH_AZ_REG0C 0x0C // Cache Line Size - R/W +#define FCH_AZ_REG0D 0x0D // Latency Timer +#define FCH_AZ_REG0E 0x0E // Header Type +#define FCH_AZ_REG0F 0x0F // BIST +#define FCH_AZ_REG10 0x10 // Lower Base Address Register +#define FCH_AZ_REG14 0x14 // Upper Base Address Register +#define FCH_AZ_REG2C 0x2C // Subsystem Vendor ID +#define FCH_AZ_REG2D 0x2D // Subsystem ID +#define FCH_AZ_REG34 0x34 // Capabilities Pointer +#define FCH_AZ_REG3C 0x3C // Interrupt Line +#define FCH_AZ_REG3D 0x3D // Interrupt Pin +#define FCH_AZ_REG3E 0x3E // Minimum Grant +#define FCH_AZ_REG3F 0x3F // Maximum Latency +#define FCH_AZ_REG40 0x40 // Misc Control 1 +#define FCH_AZ_REG42 0x42 // Misc Control 2 Register +#define FCH_AZ_REG43 0x43 // Misc Control 3 Register +#define FCH_AZ_REG44 0x44 // Interrupt Pin Control Register +#define FCH_AZ_REG46 0x46 // Debug Control Register +#define FCH_AZ_REG4C 0x4C +#define FCH_AZ_REG50 0x50 // Power Management Capability ID +#define FCH_AZ_REG52 0x52 // Power Management Capabilities +#define FCH_AZ_REG54 0x54 // Power Management Control/Status +#define FCH_AZ_REG60 0x60 // MSI Capability ID +#define FCH_AZ_REG62 0x62 // MSI Message Control +#define FCH_AZ_REG64 0x64 // MSI Message Lower Address +#define FCH_AZ_REG68 0x68 // MSI Message Upper Address +#define FCH_AZ_REG6C 0x6C // MSI Message Data + +#define FCH_AZ_BAR_REG00 0x00 // Global Capabilities - R +#define FCH_AZ_BAR_REG02 0x02 // Minor Version - R +#define FCH_AZ_BAR_REG03 0x03 // Major Version - R +#define FCH_AZ_BAR_REG04 0x04 // Output Payload Capability - R +#define FCH_AZ_BAR_REG06 0x06 // Input Payload Capability - R +#define FCH_AZ_BAR_REG08 0x08 // Global Control - R/W +#define FCH_AZ_BAR_REG0C 0x0C // Wake Enable - R/W +#define FCH_AZ_BAR_REG0E 0x0E // State Change Status - R/W +#define FCH_AZ_BAR_REG10 0x10 // Global Status - R/W +#define FCH_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R +#define FCH_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R +#define FCH_AZ_BAR_REG20 0x20 // Interrupt Control - R/W +#define FCH_AZ_BAR_REG24 0x24 // Interrupt Status - R/W +#define FCH_AZ_BAR_REG30 0x30 // Wall Clock Counter - R +#define FCH_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W +#define FCH_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W +#define FCH_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW +#define FCH_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W +#define FCH_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W +#define FCH_AZ_BAR_REG4C 0x4C // CORB Control - R/W +#define FCH_AZ_BAR_REG4D 0x4D // CORB Status - R/W +#define FCH_AZ_BAR_REG4E 0x4E // CORB Size - R/W +#define FCH_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW +#define FCH_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW +#define FCH_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW +#define FCH_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W +#define FCH_AZ_BAR_REG5C 0x5C // RIRB Control - R/W +#define FCH_AZ_BAR_REG5D 0x5D // RIRB Status - R/W +#define FCH_AZ_BAR_REG5E 0x5E // RIRB Size - R/W +#define FCH_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W +#define FCH_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W +#define FCH_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W +#define FCH_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R + +// +// FCH LPC Device 0x780E +// Device 20 (0x14) Func 3 +// +#define FCH_LPC_REG00 0x00 // VID- R +#define FCH_LPC_REG02 0x02 // DID- R +#define FCH_LPC_REG04 0x04 // CMD- RW +#define FCH_LPC_REG06 0x06 // STATUS- RW +#define FCH_LPC_REG08 0x08 // Revision ID/Class Code - R +#define FCH_LPC_REG0C 0x0C // Cache Line Size - R +#define FCH_LPC_REG0D 0x0D // Latency Timer - R +#define FCH_LPC_REG0E 0x0E // Header Type - R +#define FCH_LPC_REG0F 0x0F // BIST- R +#define FCH_LPC_REG10 0x10 // Base Address Reg 0- RW* +#define FCH_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro +#define FCH_LPC_REG34 0x34 // Capabilities Pointer - Ro +#define FCH_LPC_REG40 0x40 // PCI Control - RW +#define FCH_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW +#define FCH_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW +#define FCH_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW +#define FCH_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW +#define FCH_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW +#define FCH_LPC_REG49 0x49 // LPC Sync Timeout Count - RW +#define FCH_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW +#define FCH_LPC_REG4C 0x4C // Memory Range Register - RW +#define FCH_LPC_REG50 0x50 // Rom Protect 0 - RW +#define FCH_LPC_REG54 0x54 // Rom Protect 1 - RW +#define FCH_LPC_REG58 0x58 // Rom Protect 2 - RW +#define FCH_LPC_REG5C 0x5C // Rom Protect 3 - RW +#define FCH_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles - +#define FCH_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles - +#define FCH_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW +#define FCH_LPC_REG65 0x65 +#define FCH_LPC_REG66 0x66 +#define FCH_LPC_REG67 0x67 +#define FCH_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW +#define FCH_LPC_REG69 0x69 +#define FCH_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW +#define FCH_LPC_REG6B 0x6B +#define FCH_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW +#define FCH_LPC_REG6D 0x6D +#define FCH_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW +#define FCH_LPC_REG6F 0x6F +#define FCH_LPC_REG70 0x70 // Firmware ub Select - RW* +#define FCH_LPC_REG71 0x71 +#define FCH_LPC_REG72 0x72 +#define FCH_LPC_REG73 0x73 +#define FCH_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R +#define FCH_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R +#define FCH_LPC_REG79 0x79 // Miscellaneous Control Bits- W/R +#define FCH_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R +#define FCH_LPC_REG9C 0x9C +#define FCH_LPC_REG80 0x80 // MSI Capability Register- R +#define FCH_LPC_REGA0 0x0A0 // SPI base address +#define FCH_LPC_REGA1 0x0A1 // SPI base address +#define FCH_LPC_REGA2 0x0A2 // SPI base address +#define FCH_LPC_REGA3 0x0A3 // SPI base address +#define FCH_LPC_REGA4 0x0A4 +#define FCH_LPC_REGB8 0x0B8 +#define FCH_LPC_REGBA 0x0BA // EcControl +#define FCH_LPC_REGBB 0x0BB // HostControl +#define FCH_LPC_REGC8 0x0C8 +#define FCH_LPC_REGCC 0x0CC // AutoRomCfg +#define FCH_LPC_REGD0 0x0D0 +#define FCH_LPC_REGD3 0x0D3 +#define FCH_LPC_REGD4 0x0D4 + +// +// FCH PCIB 0x780F +// Device 20 (0x14) Func 4 +// +#define FCH_PCIB_REG04 0x04 // Command +#define FCH_PCIB_REG0D 0x0D // Primary Master Latency Timer +#define FCH_PCIB_REG1B 0x1B // Secondary Latency Timer +#define FCH_PCIB_REG1C 0x1C // IO Base +#define FCH_PCIB_REG1D 0x1D // IO Limit +#define FCH_PCIB_REG40 0x40 // CPCTRL +#define FCH_PCIB_REG42 0x42 // CLKCTRL +#define FCH_PCIB_REG48 0x48 // +#define FCH_PCIB_REG4A 0x4A // PCICLK Enable Bits +#define FCH_PCIB_REG4B 0x4B // Misc Control +#define FCH_PCIB_REG4C 0x4C // AutoClockRun Control +#define FCH_PCIB_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop Override +#define FCH_PCIB_REG65 0x65 // Misc Control +#define FCH_PCIB_REG66 0x66 // Misc Control +// +// FCH GEC 0x14E4 0x1699 +// Device 20 (0x14) Func 6 +// +#define FCH_GEC_REG10 0x10 // GEC BAR + +// +// FCH SD +// Device 20 (0x14) Func 7 +// +#define SD_PCI_REG10 0x10 +#define SD_PCI_REG2C 0x2C +#define SD_PCI_REGA4 0xA4 +#define SD_PCI_REGA8 0xA8 +#define SD_PCI_REGAC 0xAC +#define SD_PCI_REGB0 0xB0 +#define SD_PCI_REGB8 0xB8 +#define SD_PCI_REGBC 0xBC +#define SD_PCI_REGD0 0xD0 +#define SD_PCI_REGF0 0xF0 +#define SD_PCI_REGF4 0xF4 +#define SD_PCI_REGF8 0xF8 +#define SD_PCI_REGFC 0xFC +#define FCH_SD_BAR_REG28 0x28 // SDHC_CTRL1 +#define SD_CARD_PRESENT BIT0 +#define FCH_SD_BAR_REG2C 0x2C // SDHC_CTRL2 +#define FCH_SD_FREQUENCY_SLT BIT2 +#define FCH_SD_BAR_REG3C 0x3C // SDHC_HOST_CTRL2 +#define FCH_SD_1_8V BIT3 + +// +// FCH MMIO Base (SMI) +// offset : 0x200 +// +#define FCH_SMI_REG00 0x00 // EventStatus +#define FCH_SMI_REG04 0x04 // EventEnable +#define FCH_SMI_REG08 0x08 // SciTrig +#define FCH_SMI_REG0C 0x0C // SciLevl +#define FCH_SMI_REG10 0x10 // SmiSciStatus +#define FCH_SMI_REG14 0x14 // SmiSciEn +#define FCH_SMI_REG18 0x18 // ForceSciEn +#define FCH_SMI_REG1C 0x1C // SciRwData +#define FCH_SMI_REG3C 0x3C // DataErrorStatus +#define FCH_SMI_REG20 0x20 // SciS0En +#define FCH_SMI_Gevent0 0x40 // SciMap0 +#define FCH_SMI_Gevent1 0x41 // SciMap1 +#define FCH_SMI_Gevent2 0x42 // SciMap2 +#define FCH_SMI_Gevent3 0x43 // SciMap3 +#define FCH_SMI_Gevent4 0x44 // SciMap4 +#define FCH_SMI_Gevent5 0x45 // SciMap5 +#define FCH_SMI_Gevent6 0x46 // SciMap6 +#define FCH_SMI_Gevent7 0x47 // SciMap7 +#define FCH_SMI_Gevent8 0x48 // SciMap8 +#define FCH_SMI_Gevent9 0x49 // SciMap9 +#define FCH_SMI_Gevent10 0x4A // SciMap10 +#define FCH_SMI_Gevent11 0x4B // SciMap11 +#define FCH_SMI_Gevent12 0x4C // SciMap12 +#define FCH_SMI_Gevent13 0x4D // SciMap13 +#define FCH_SMI_Gevent14 0x4E // SciMap14 +#define FCH_SMI_Gevent15 0x4F // SciMap15 +#define FCH_SMI_Gevent16 0x50 // SciMap16 +#define FCH_SMI_Gevent17 0x51 // SciMap17 +#define FCH_SMI_Gevent18 0x52 // SciMap18 +#define FCH_SMI_Gevent19 0x53 // SciMap19 +#define FCH_SMI_Gevent20 0x54 // SciMap20 +#define FCH_SMI_Gevent21 0x55 // SciMap21 +#define FCH_SMI_Gevent22 0x56 // SciMap22 +#define FCH_SMI_Gevent23 0x57 // SciMap23 +#define FCH_SMI_Usbwakup0 0x58 // SciMap24 +#define FCH_SMI_Usbwakup1 0x59 // SciMap25 +#define FCH_SMI_Usbwakup2 0x5A // SciMap26 +#define FCH_SMI_Usbwakup3 0x5B // SciMap27 +#define FCH_SMI_SBGppPme0 0x5C // SciMap28 +#define FCH_SMI_SBGppPme1 0x5D // SciMap29 +#define FCH_SMI_SBGppPme2 0x5E // SciMap30 +#define FCH_SMI_SBGppPme3 0x5F // SciMap31 +#define FCH_SMI_SBGppHp0 0x60 // SciMap32 +#define FCH_SMI_SBGppHp1 0x61 // SciMap33 +#define FCH_SMI_SBGppHp2 0x62 // SciMap34 +#define FCH_SMI_SBGppHp3 0x63 // SciMap35 +#define FCH_SMI_AzaliaPme 0x64 // SciMap36 +#define FCH_SMI_SataGevent0 0x65 // SciMap37 +#define FCH_SMI_SataGevent1 0x66 // SciMap38 +#define FCH_SMI_GecPme 0x67 // SciMap39 +#define FCH_SMI_IMCGevent0 0x68 // SciMap40 +#define FCH_SMI_IMCGevent1 0x69 // SciMap41 +#define FCH_SMI_CIRPme 0x6A // SciMap42 +#define FCH_SMI_WakePinGevent 0x6B // SciMap43 +#define FCH_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent +#define FCH_SMI_ASFMasterIntr 0x6D // SciMap45 +#define FCH_SMI_ASFSlaveIntr 0x6E // SciMap46 +#define FCH_SMI_SMBUS0 0x6F // SciMap47 +#define FCH_SMI_TWARN 0x70 // SciMap48 +#define FCH_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr +#define FCH_SMI_iLLB 0x72 // SciMap50 +#define FCH_SMI_PowerButton 0x73 // SciMap51 +#define FCH_SMI_ProcHot 0x74 // SciMap52 +#define FCH_SMI_APUHwAssertion 0x75 // SciMap53 +#define FCH_SMI_APUSciAssertion 0x76 // SciMap54 +#define FCH_SMI_RAS 0x77 // SciMap55 +#define FCH_SMI_xHC0Pme 0x78 // SciMap56 +#define FCH_SMI_xHC1Pme 0x79 // SciMap57 +#define FCH_SMI_AcDcWake 0x7A // SciMap58 + +// Empty from 0x72-0x7F +//#Define FCH_SMI_REG7C 0x7F // SciMap63 *** + +#define FCH_SMI_REG80 0x80 // SmiStatus0 +#define FCH_SMI_REG84 0x84 // SmiStatus1 +#define FCH_SMI_REG88 0x88 // SmiStatus2 +#define FCH_SMI_REG8C 0x8C // SmiStatus3 +#define FCH_SMI_REG90 0x90 // SmiStatus4 +#define FCH_SMI_REG94 0x94 // SmiPointer +#define FCH_SMI_REG96 0x96 // SmiTimer +#define FCH_SMI_REG98 0x98 // SmiTrig +#define FCH_SMI_REG9C 0x9C // SmiTrig +#define FCH_SMI_REGA0 0xA0 +#define FCH_SMI_REGA1 0xA1 +#define FCH_SMI_REGA2 0xA2 +#define FCH_SMI_REGA3 0xA3 +#define FCH_SMI_REGA4 0xA4 +#define FCH_SMI_REGA5 0xA5 +#define FCH_SMI_REGA6 0xA6 +#define FCH_SMI_REGA7 0xA7 +#define FCH_SMI_REGA8 0xA8 +#define FCH_SMI_REGA9 0xA9 +#define FCH_SMI_REGAA 0xAA +#define FCH_SMI_REGAB 0xAB +#define FCH_SMI_REGAC 0xAC +#define FCH_SMI_REGAD 0xAD +#define FCH_SMI_REGAE 0xAE +#define FCH_SMI_REGAF 0xAF +#define FCH_SMI_REGB0 0xB0 +#define FCH_SMI_REGB1 0xB1 +#define FCH_SMI_REGB2 0xB2 +#define FCH_SMI_REGB3 0xB3 +#define FCH_SMI_REGB4 0xB4 +#define FCH_SMI_REGB5 0xB5 +#define FCH_SMI_REGB6 0xB6 +#define FCH_SMI_REGB7 0xB7 +#define FCH_SMI_REGB8 0xB8 +#define FCH_SMI_REGB9 0xB9 +#define FCH_SMI_REGBA 0xBA +#define FCH_SMI_REGBB 0xBB +#define FCH_SMI_REGBC 0xBC +#define FCH_SMI_REGBD 0xBD +#define FCH_SMI_REGBE 0xBE +#define FCH_SMI_REGBF 0xBF +#define FCH_SMI_REGC0 0xC0 +#define FCH_SMI_REGC1 0xC1 +#define FCH_SMI_REGC2 0xC2 +#define FCH_SMI_REGC3 0xC3 +#define FCH_SMI_REGC4 0xC4 +#define FCH_SMI_REGC5 0xC5 +#define FCH_SMI_REGC6 0xC6 +#define FCH_SMI_REGC7 0xC7 +#define FCH_SMI_REGC8 0xC8 +#define FCH_SMI_REGCA 0xCA // IoTrapping1 +#define FCH_SMI_REGCC 0xCC // IoTrapping2 +#define FCH_SMI_REGCE 0xCE // IoTrapping3 +#define FCH_SMI_TRAPPING_WRITE 0x01 +#define FCH_SMI_REGD0 0xD0 // MemTrapping0 +#define FCH_SMI_REGD4 0xD4 // MemRdOvrData0 +#define FCH_SMI_REGD8 0xD8 // MemTrapping1 +#define FCH_SMI_REGDC 0xDC // MemRdOvrData1 +#define FCH_SMI_REGE0 0xE0 // MemTrapping2 +#define FCH_SMI_REGE4 0xE4 // MemRdOvrData2 +#define FCH_SMI_REGE8 0xE8 // MemTrapping3 +#define FCH_SMI_REGEC 0xEC // MemRdOvrData3 +#define FCH_SMI_REGF0 0xF0 // CfgTrapping0 +#define FCH_SMI_REGF4 0xF4 // CfgTrapping1 +#define FCH_SMI_REGF8 0xF8 // CfgTrapping2 +#define FCH_SMI_REGFC 0xFC // CfgTrapping3 + +// +// FCH MMIO Base (PMIO) +// offset : 0x300 +// +#define FCH_PMIOA_REG00 0x00 // ISA Decode +#define FCH_PMIOA_REG04 0x04 // ISA Control +#define FCH_PMIOA_REG08 0x08 // PCI Control +#define FCH_PMIOA_REG0C 0x0C // StpClkSmaf +#define FCH_PMIOA_REG10 0x10 // RetryDetect +#define FCH_PMIOA_REG14 0x14 // StuckDetect +#define FCH_PMIOA_REG20 0x20 // BiosRamEn +#define FCH_PMIOA_REG24 0x24 // AcpiMmioEn +#define FCH_PMIOA_REG28 0x28 // AsfEn +#define FCH_PMIOA_REG2C 0x2C // Smbus0En +#define FCH_PMIOA_REG2E 0x2E // Smbus0Sel +#define FCH_PMIOA_REG34 0x34 // IoApicEn +#define FCH_PMIOA_REG3C 0x3C // SmartVoltEn +#define FCH_PMIOA_REG40 0x40 // SmartVolt2En +#define FCH_PMIOA_REG44 0x44 // BootTimerEn +#define FCH_PMIOA_REG48 0x48 // WatchDogTimerEn +#define FCH_PMIOA_REG4C 0x4C // WatchDogTimerConfig +#define FCH_PMIOA_REG50 0x50 // HPETEn +#define FCH_PMIOA_REG54 0x54 // SerialIrqConfig +#define FCH_PMIOA_REG56 0x56 // RtcControl +#define FCH_PMIOA_REG58 0x58 // VRT_T1 +#define FCH_PMIOA_REG59 0x59 // VRT_T2 +#define FCH_PMIOA_REG5A 0x5A // IntruderControl +#define FCH_PMIOA_REG5B 0x5B // RtcShadow +#define FCH_PMIOA_REG5C 0x5C +#define FCH_PMIOA_REG5D 0x5D +#define FCH_PMIOA_REG5E 0x5E // RtcExtIndex +#define FCH_PMIOA_REG5F 0x5F // RtcExtData +#define FCH_PMIOA_REG60 0x60 // AcpiPm1EvtBlk +#define FCH_PMIOA_REG62 0x62 // AcpiPm1CntBlk +#define FCH_PMIOA_REG64 0x64 // AcpiPmTmrBlk +#define FCH_PMIOA_REG66 0x66 // P_CNTBlk +#define FCH_PMIOA_REG68 0x68 // AcpiGpe0Blk +#define FCH_PMIOA_REG6A 0x6A // AcpiSmiCmd +#define FCH_PMIOA_REG6C 0x6C // AcpiPm2CntBlk +#define FCH_PMIOA_REG6E 0x6E // AcpiPmaCntBlk +#define FCH_PMIOA_REG74 0x74 // AcpiConfig +#define FCH_PMIOA_REG78 0x78 // WakeIoAddr +#define FCH_PMIOA_REG7A 0x7A // HaltCountEn +#define FCH_PMIOA_REG7C 0x7C // C1eWrPortAdr +#define FCH_PMIOA_REG7E 0x7E // CStateEn +#define FCH_PMIOA_REG7F 0x7F // CStateEn +#define FCH_PMIOA_REG80 0x80 // BreakEvent +#define FCH_PMIOA_REG84 0x84 // AutoArbEn +#define FCH_PMIOA_REG88 0x88 // CStateControl +#define FCH_PMIOA_REG89 0x89 // +#define FCH_PMIOA_REG8C 0x8C // StpClkHoldTime +#define FCH_PMIOA_REG8E 0x8E // PopUpEndTime +#define FCH_PMIOA_REG90 0x90 // C4Control +#define FCH_PMIOA_REG94 0x94 // CStateTiming0 +#define FCH_PMIOA_REG96 0x96 // +#define FCH_PMIOA_REG97 0x97 // +#define FCH_PMIOA_REG98 0x98 // CStateTiming1 +#define FCH_PMIOA_REG99 0x99 // +#define FCH_PMIOA_REG9B 0x9B // +#define FCH_PMIOA_REG9C 0x9C // C2Count +#define FCH_PMIOA_REG9D 0x9D // C3Count +#define FCH_PMIOA_REG9E 0x9E // C4Count +#define FCH_PMIOA_REGA0 0xA0 // MessageCState +#define FCH_PMIOA_REGA4 0xA4 // +#define FCH_PMIOA_REGA8 0xA8 // TrafficMonitorIdleTime +#define FCH_PMIOA_REGAA 0xAA // TrafficMonitorIntTime +#define FCH_PMIOA_REGAC 0xAC // TrafficMonitorTrafficCount +#define FCH_PMIOA_REGAE 0xAE // TrafficMonitorIntrCount +#define FCH_PMIOA_REGB0 0xB0 // TrafficMonitorTimeTick +#define FCH_PMIOA_REGB4 0xB4 // FidVidControl +#define FCH_PMIOA_REGB6 0xB6 // TPRESET1 +#define FCH_PMIOA_REGB7 0xB7 // Tpreset1b +#define FCH_PMIOA_REGB8 0xB8 // TPRESET2 +#define FCH_PMIOA_REGB9 0xB9 // Test0 +#define FCH_PMIOA_REGBA 0xBA // S_StateControl +#define FCH_PMIOA_REGBB 0xBB // +#define FCH_PMIOA_REGBC 0xBC // ThrottlingControl +#define FCH_PMIOA_REGBE 0xBE // ResetControl +#define FCH_PMIOA_REGBF 0xBF // ResetControl +#define FCH_PMIOA_REGC0 0xC0 // S5Status +#define FCH_PMIOA_REGC2 0xC2 // ResetStatus +#define FCH_PMIOA_REGC4 0xC4 // ResetCommand +#define FCH_PMIOA_REGC5 0xC5 // CF9Shadow +#define FCH_PMIOA_REGC6 0xC6 // HTControl +#define FCH_PMIOA_REGC8 0xC8 // Misc +#define FCH_PMIOA_REGCC 0xCC // IoDrvSth +#define FCH_PMIOA_REGD0 0xD0 // CLKRunEn +#define FCH_PMIOA_REGD2 0xD2 // PmioDebug +#define FCH_PMIOA_REGD3 0xD3 // SD +#define FCH_PMIOA_REGD6 0xD6 // IMCGating +#define FCH_PMIOA_REGD7 0xD7 // +#define FCH_PMIOA_REGD8 0xD8 // MiscIndex +#define FCH_PMIOA_REGD9 0xD9 // MiscData +#define FCH_PMIOA_REGDA 0xDA // SataConfig +#define FCH_PMIOA_REGDC 0xDC // HyperFlashConfig +#define FCH_PMIOA_REGDE 0xDE // ABConfig +#define FCH_PMIOA_REGE0 0xE0 // ABRegBar +#define FCH_PMIOA_REGE4 0xE4 +#define FCH_PMIOA_REGE6 0xE6 // FcEn +#define FCH_PMIOA_REGE7 0xE7 +#define FCH_PMIOA_REGE8 0xE8 +#define FCH_PMIOA_REGEA 0xEA // PcibConfig +#define FCH_PMIOA_REGEB 0xEB // AzEn +#define FCH_PMIOA_REGEC 0xEC // LpcGating +#define FCH_PMIOA_REGED 0xED // UsbGating +#define FCH_PMIOA_REGEE 0xEE // UsbCntrl +#define FCH_PMIOA_REGEF 0xEF // UsbEnable +#define FCH_PMIOA_REGF0 0xF0 // UsbControl +#define FCH_PMIOA_REGF2 0xF2 // UsbControl2 +#define FCH_PMIOA_REGF3 0xF3 // UsbDebug +#define FCH_PMIOA_REGF4 0xF4 // UsbDebug +#define FCH_PMIOA_REGF6 0xF6 // GecEn +#define FCH_PMIOA_REGF8 0xF8 // GecConfig +#define FCH_PMIOA_REGFC 0xFC // TraceMemoryEn + +#define FCH_PMx00_DecodeEn 0xFED80300ul // +#define FCH_PMxC0_ResetStatus 0xFED803C0ul // +#define FCH_PMxC0_ResetStatus_Mask 0x3fff0000ul // +#define FCH_PMxC4_ResetCommand 0xFED803C4ul // +#define FCH_PMxDC_SataConfig2 0xFED803DCul // + +// +// FCH MMIO Base (PMIO2) +// offset : 0x400 +// +#define FCH_PMIO2_REG00 0x00 // Fan0InputControl +#define FCH_PMIO2_REG01 0x01 // Fan0Control +#define FCH_PMIO2_REG02 0x02 // Fan0Freq +#define FCH_PMIO2_REG03 0x03 // LowDuty0 +#define FCH_PMIO2_REG04 0x04 // MidDuty0 + +#define FCH_PMIO2_REG10 0x00 // Fan1InputControl +#define FCH_PMIO2_REG11 0x01 // Fan1Control +#define FCH_PMIO2_REG12 0x02 // Fan1Freq +#define FCH_PMIO2_REG13 0x03 // LowDuty1 +#define FCH_PMIO2_REG14 0x04 // MidDuty1 + +#define FCH_PMIO2_REG63 0x63 // SampleFreqDiv +#define FCH_PMIO2_REG69 0x69 // Fan0 Speed +#define FCH_PMIO2_REG95 0x95 // Temperature +#define FCH_PMIO2_REGB8 0xB8 // Voltage +#define FCH_PMIO2_REGEA 0xEA // Hwm_Calibration + +#define FCH_PMIO2_REG92 0x92 // +#define FCH_PMIO2_REGF8 0xF8 // VoltageSamleSel +#define FCH_PMIO2_REGF9 0xF9 // TempSampleSel + +#define FCH_PMIO2_REG 0xFC // TraceMemoryEn + + +// +// FCH MMIO Base (GPIO/IoMux) +// offset : 0x100/0xD00 +// +/* +GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226. +*/ +#define FCH_GPIO_REG00 0x00 +#define FCH_GPIO_REG06 0x06 +#define FCH_GPIO_REG09 0x09 +#define FCH_GPIO_REG10 0x0A +#define FCH_GPIO_REG17 0x11 +#define FCH_GPIO_REG21 0x15 +#define FCH_GPIO_REG28 0x1C +#define FCH_GPIO_REG32 0x20 +#define FCH_GPIO_REG33 0x21 +#define FCH_GPIO_REG34 0x22 +#define FCH_GPIO_REG35 0x23 +#define FCH_GPIO_REG36 0x24 +#define FCH_GPIO_REG37 0x25 +#define FCH_GPIO_REG38 0x26 +#define FCH_GPIO_REG39 0x27 +#define FCH_GPIO_REG40 0x28 +#define FCH_GPIO_REG41 0x29 +#define FCH_GPIO_REG42 0x2A +#define FCH_GPIO_REG43 0x2B +#define FCH_GPIO_REG44 0x2C +#define FCH_GPIO_REG45 0x2D +#define FCH_GPIO_REG46 0x2E +#define FCH_GPIO_REG47 0x2F +#define FCH_GPIO_REG48 0x30 +#define FCH_GPIO_REG49 0x31 +#define FCH_GPIO_REG50 0x32 +#define FCH_GPIO_REG51 0x33 +#define FCH_GPIO_REG52 0x34 +#define FCH_GPIO_REG53 0x35 +#define FCH_GPIO_REG54 0x36 +#define FCH_GPIO_REG55 0x37 +#define FCH_GPIO_REG56 0x38 +#define FCH_GPIO_REG57 0x39 +#define FCH_GPIO_REG58 0x3A +#define FCH_GPIO_REG59 0x3B +#define FCH_GPIO_REG60 0x3C +#define FCH_GPIO_REG61 0x3D +#define FCH_GPIO_REG62 0x3E +#define FCH_GPIO_REG63 0x3F +#define FCH_GPIO_REG64 0x40 +#define FCH_GPIO_REG65 0x41 +#define FCH_GPIO_REG66 0x42 +#define FCH_GPIO_REG67 0x43 +#define FCH_GPIO_REG68 0x44 +#define FCH_GPIO_REG69 0x45 +#define FCH_GPIO_REG70 0x46 +#define FCH_GPIO_REG71 0x47 +#define FCH_GPIO_REG72 0x48 +#define FCH_GPIO_REG73 0x49 +#define FCH_GPIO_REG74 0x4A +#define FCH_GPIO_REG75 0x4B +#define FCH_GPIO_REG76 0x4C +#define FCH_GPIO_REG77 0x4D +#define FCH_GPIO_REG78 0x4E +#define FCH_GPIO_REG79 0x4F +#define FCH_GPIO_REG80 0x50 + +#define FCH_GEVENT_REG00 0x60 +#define FCH_GEVENT_REG01 0x61 +#define FCH_GEVENT_REG02 0x62 +#define FCH_GEVENT_REG03 0x63 +#define FCH_GEVENT_REG04 0x64 +#define FCH_GEVENT_REG05 0x65 +#define FCH_GEVENT_REG06 0x66 +#define FCH_GEVENT_REG07 0x67 +#define FCH_GEVENT_REG08 0x68 +#define FCH_GEVENT_REG09 0x69 +#define FCH_GEVENT_REG10 0x6A +#define FCH_GEVENT_REG11 0x6B +#define FCH_GEVENT_REG12 0x6C +#define FCH_GEVENT_REG13 0x6D +#define FCH_GEVENT_REG14 0x6E +#define FCH_GEVENT_REG15 0x6F +#define FCH_GEVENT_REG16 0x70 +#define FCH_GEVENT_REG17 0x71 +#define FCH_GEVENT_REG18 0x72 +#define FCH_GEVENT_REG19 0x73 +#define FCH_GEVENT_REG20 0x74 +#define FCH_GEVENT_REG21 0x75 +#define FCH_GEVENT_REG22 0x76 +#define FCH_GEVENT_REG23 0x77 +// S5-DOMAIN GPIO +#define FCH_GPIO_REG160 0xA0 +#define FCH_GPIO_REG161 0xA1 +#define FCH_GPIO_REG162 0xA2 +#define FCH_GPIO_REG163 0xA3 +#define FCH_GPIO_REG164 0xA4 +#define FCH_GPIO_REG165 0xA5 +#define FCH_GPIO_REG166 0xA6 +#define FCH_GPIO_REG167 0xA7 +#define FCH_GPIO_REG168 0xA8 +#define FCH_GPIO_REG169 0xA9 +#define FCH_GPIO_REG170 0xAA +#define FCH_GPIO_REG171 0xAB +#define FCH_GPIO_REG172 0xAC +#define FCH_GPIO_REG173 0xAD +#define FCH_GPIO_REG174 0xAE +#define FCH_GPIO_REG175 0xAF +#define FCH_GPIO_REG176 0xB0 +#define FCH_GPIO_REG177 0xB1 +#define FCH_GPIO_REG178 0xB2 +#define FCH_GPIO_REG179 0xB3 +#define FCH_GPIO_REG180 0xB4 +#define FCH_GPIO_REG181 0xB5 +#define FCH_GPIO_REG182 0xB6 +#define FCH_GPIO_REG183 0xB7 +#define FCH_GPIO_REG184 0xB8 +#define FCH_GPIO_REG185 0xB9 +#define FCH_GPIO_REG186 0xBA +#define FCH_GPIO_REG187 0xBB +#define FCH_GPIO_REG188 0xBC +#define FCH_GPIO_REG189 0xBD +#define FCH_GPIO_REG190 0xBE +#define FCH_GPIO_REG191 0xBF +#define FCH_GPIO_REG192 0xC0 +#define FCH_GPIO_REG193 0xC1 +#define FCH_GPIO_REG194 0xC2 +#define FCH_GPIO_REG195 0xC3 +#define FCH_GPIO_REG196 0xC4 +#define FCH_GPIO_REG197 0xC5 +#define FCH_GPIO_REG198 0xC6 +#define FCH_GPIO_REG199 0xC7 +#define FCH_GPIO_REG200 0xC8 +#define FCH_GPIO_REG201 0xC9 +#define FCH_GPIO_REG202 0xCA +#define FCH_GPIO_REG203 0xCB +#define FCH_GPIO_REG204 0xCC +#define FCH_GPIO_REG205 0xCD +#define FCH_GPIO_REG206 0xCE +#define FCH_GPIO_REG207 0xCF +#define FCH_GPIO_REG208 0xD0 +#define FCH_GPIO_REG209 0xD1 +#define FCH_GPIO_REG210 0xD2 +#define FCH_GPIO_REG211 0xD3 +#define FCH_GPIO_REG212 0xD4 +#define FCH_GPIO_REG213 0xD5 +#define FCH_GPIO_REG214 0xD6 +#define FCH_GPIO_REG215 0xD7 +#define FCH_GPIO_REG216 0xD8 +#define FCH_GPIO_REG217 0xD9 +#define FCH_GPIO_REG218 0xDA +#define FCH_GPIO_REG219 0xDB +#define FCH_GPIO_REG220 0xDC +#define FCH_GPIO_REG221 0xDD +#define FCH_GPIO_REG222 0xDE +#define FCH_GPIO_REG223 0xDF +#define FCH_GPIO_REG224 0xF0 +#define FCH_GPIO_REG225 0xF1 +#define FCH_GPIO_REG226 0xF2 +#define FCH_GPIO_REG227 0xF3 +#define FCH_GPIO_REG228 0xF4 + +#define FCH_IOMUXx0D_IR_TX0_USB_OC5_L_AGPIO13 0xFED80D0Dul // +#define FCH_IOMUXx0E_IR_TX1_USB_OC6_L_AGPIO14 0xFED80D0Eul // +#define FCH_IOMUXx13_SCL1_I2C3_SCL_EGPIO19 0xFED80D13ul // +#define FCH_IOMUXx14_SDA1_I2C3_SDA_EGPIO20 0xFED80D14ul // +#define FCH_IOMUX_55_FANOUT0_AGPIO85 0xFED80D55ul // FANOUT0_AGPIO85 +#define FCH_IOMUXx66_SD0_PWR_CTRL_AGPIO102 0xFED80D66ul // +#define FCH_IOMUXx71_SCL0_I2C2_SCL_EGPIO113 0xFED80D71ul // +#define FCH_IOMUXx72_SDA0_I2C2_SDA_EGPIO114 0xFED80D72ul // +#define FCH_IOMUXx89_UART0_RTS_L_EGPIO137 0xFED80D89ul // +#define FCH_IOMUXx8A_UART0_TXD_EGPIO138 0xFED80D8Aul // +#define FCH_IOMUXx8E_UART1_RTS_L_EGPIO142 0xFED80D8Eul // +#define FCH_IOMUXx8F_UART1_TXD_EGPIO143 0xFED80D8Ful // + +// +// FCH MMIO Base (GPIO BANK0) +// offset : 0x1500 +// +#define FCH_GPIO_PULL_UP_ENABLE BIT4 +#define FCH_GPIO_PULL_DOWN_ENABLE BIT5 +#define FCH_GPIO_OUTPUT_VALUE BIT6 +#define FCH_GPIO_OUTPUT_ENABLE (1 << 7) + +#define FCH_GPIO_068_AZ_SDIN0_GPIO26 0x68 +#define FCH_GPIO_06C_AZ_SDIN1_GPIO27 0x6C +#define FCH_GPIO_070_AZ_SDIN2_GPIO28 0x70 +#define FCH_GPIO_074_AZ_SDIN3_GPIO29 0x74 + +#define FCH_GPIO_10C_GPIO55_AGPI067 0x10C +#define FCH_GPIO_118_GPIO59_AGPI070 0x118 + +// +// FCH MMIO Base (IoMux) +// offset : 0xD00 +// +#define FCH_IOMUX_1A_AZ_SDIN0_EGPIO26 0x1A +#define FCH_IOMUX_1B_AZ_SDIN1_EGPIO27 0x1B +#define FCH_IOMUX_1C_AZ_SDIN2_EGPIO28 0x1C +#define FCH_IOMUX_1D_AZ_SDIN3_EGPIO29 0x1D + +// +// FCH MMIO Base (SMBUS) +// offset : 0xA00 +// +#define FCH_SMBUS_REG12 0x12 // I2CbusConfig + +// +// FCH MMIO Base (MISC) +// offset : 0xE00 +// +#define FCH_MISC_REG00 0x00 // ClkCntrl0 +/* +FCH_MISC_REG00 EQU 000h + ClkCntrl0 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG04 0x04 // ClkCntrl1 +/* +FCH_MISC_REG04 EQU 004h + ClkCntrl1 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG08 0x08 // ClkCntrl2 +/* +FCH_MISC_REG08 EQU 008h + ClkCntrl2 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG0C 0x0C // ClkCntrl3 +/* +FCH_MISC_REG0C EQU 00Ch + ClkCntrl3 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG10 0x10 // ClkCntrl4 +/* +FCH_MISC_REG10 EQU 010h + ClkCntrl4 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG14 0x14 // ClkCntrl5 +/* +FCH_MISC_REG14 EQU 014h + ClkCntrl5 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG18 0x18 // ClkCntrl6 +/* +FCH_MISC_REG18 EQU 018h + ClkCntrl6 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG1C 0x1C +#define FCH_MISC_REG20 0x20 +#define FCH_MISC_REG30 0x30 // OscFreqCounter +/* +FCH_MISC_REG30 EQU 030h + OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second. +*/ +#define FCH_MISC_REG34 0x34 // HpetClkPeriod +/* +FCH_MISC_REG34 EQU 034h + HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M). +*/ +#define FCH_MISC_REG28 0x28 // ClkDrvSth2 +#define FCH_MISC_REG2C 0x2C +#define FCH_MISC_REG40 0x40 // MiscCntrl for clock only +#define FCH_MISC_REG41 0x41 // MiscCntr2 +#define FCH_MISC_REG42 0x42 // MiscCntr3 +#define FCH_MISC_REG44 0x44 // ValueOnPort80 +#define FCH_MISC_REG50 0x50 // +#define FCH_MISCx50_JTAG_CONTROL_ECO 0xFED80E50ul // +#define FCH_MISCx68_MEMORY_POWER_SAVING_CONTROL 0xFED80E68ul // + +#define FCH_MISC_REG6C 0x6C // EcoBit2 +/* +FCH_MISC_REG40 EQU 040h +*/ + +#define FCH_MISC_REG80 0x80 /**< FCH_MISC_REG80 + * @par + * StrapStatus [15.0] - FCH chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + */ +#define FCH_MISC_REGB6 0xB6 // + +#define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad +#define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1) + // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type. +#define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC) +#define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function +#define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock ** + +#define FCH_MISC_REG84 0x84 // StrapOverride +/* +FCH_MISC_REG84 EQU 084h + Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin. + Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin. + Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin. + Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin. + Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin. + Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin. + Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin. + Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin. + Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin. + Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin. + Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin + PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin + BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin + ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin. + BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin. + StrapOverrideEn EQU BIT31 ; Enable override strapping feature. +*/ +#define FCH_MISC_REGC0 0xC0 // CPU_Pstate0 +/* +FCH_MISC_REGC0 EQU 0C0h + Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core1_PState EQU BIT4+BIT5+BIT6 + Core2_PState EQU BIT8+BIT9+BIT10 + Core3_PState EQU BIT12+BIT13+BIT14 + Core4_PState EQU BIT16++BIT17+BIT18 + Core5_PState EQU BIT20+BIT21+BIT22 + Core6_PState EQU BIT24+BIT25+BIT26 + Core7_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGC4 0xC4 // CPU_Pstate1 +/* +FCH_MISC_REGC4 EQU 0C4h + Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core9_PState EQU BIT4+BIT5+BIT6 + Core10_PState EQU BIT8+BIT9+BIT10 + Core11_PState EQU BIT12+BIT13+BIT14 + Core12_PState EQU BIT16++BIT17+BIT18 + Core13_PState EQU BIT20+BIT21+BIT22 + Core14_PState EQU BIT24+BIT25+BIT26 + Core15_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD0 0xD0 // CPU_Cstate0 +/* +FCH_MISC_REGD0 EQU 0D0h + Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core1_CState EQU BIT4+BIT5+BIT6 + Core2_CState EQU BIT8+BIT9+BIT10 + Core3_CState EQU BIT12+BIT13+BIT14 + Core4_CState EQU BIT16++BIT17+BIT18 + Core5_CState EQU BIT20+BIT21+BIT22 + Core6_CState EQU BIT24+BIT25+BIT26 + Core7_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD4 0xD4 // CPU_Cstate1 +/* +FCH_MISC_REGD4 EQU 0D4h + Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core9_CState EQU BIT4+BIT5+BIT6 + Core10_CState EQU BIT8+BIT9+BIT10 + Core11_CState EQU BIT12+BIT13+BIT14 + Core12_CState EQU BIT16++BIT17+BIT18 + Core13_CState EQU BIT20+BIT21+BIT22 + Core14_CState EQU BIT24+BIT25+BIT26 + Core15_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGF0 0xF0 // SataPortSts +/* +FCH_MISC_REGF0 EQU 0F0h + Port0Sts EQU BIT0 ; The selected status of Port 0. + Port1Sts EQU BIT1 ; The selected status of Port 1 + Port2Sts EQU BIT2 ; The selected status of Port 2. + Port3Sts EQU BIT3 ; The selected status of Port 3 + Port4Sts EQU BIT4 ; The selected status of Port 4. + Port5Sts EQU BIT5 ; The selected status of Port 5 + SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5 + ; 01 - Select "delete" for Port 0 to 5 + ; 10 - Select "err" for Port 0 to 5 + ; 11 - Select "led" for Port 0 to 5 +*/ + +// +// FCH MMIO Base (SERIAL_DEBUG_BASE) +// offset : 0x1000 +// +#define FCH_SDB_REG00 0x00 // +#define FCH_SDB_REG74 0x74 + +#define FCH_RTC_REG00 0x00 // Seconds - RW +#define FCH_RTC_REG01 0x01 // Seconds Alarm - RW +#define FCH_RTC_REG02 0x02 // Minutes - RW +#define FCH_RTC_REG03 0x03 // Minutes Alarm - RW +#define FCH_RTC_REG04 0x04 // ours - RW +#define FCH_RTC_REG05 0x05 // ours Alarm- RW +#define FCH_RTC_REG06 0x06 // Day of Week - RW +#define FCH_RTC_REG07 0x07 // Date of Mont - RW +#define FCH_RTC_REG08 0x08 // Mont - RW +#define FCH_RTC_REG09 0x09 // Year - RW +#define FCH_RTC_REG0A 0x0A // Register A - RW +#define FCH_RTC_REG0B 0x0B // Register B - RW +#define FCH_RTC_REG0C 0x0C // Register C - R +#define FCH_RTC_REG0D 0x0D // DateAlarm - RW +#define FCH_RTC_REG32 0x32 // AltCentury - RW +#define FCH_RTC_REG48 0x48 // Century - RW +#define FCH_RTC_REG50 0x50 // Extended RAM Address Port - RW +#define FCH_RTC_REG53 0x53 // Extended RAM Data Port - RW +#define FCH_RTC_REG7E 0x7E // RTC Time Clear - RW +#define FCH_RTC_REG7F 0x7F // RTC RAM Enable - RW + +#define FCH_ECMOS_REG00 0x00 // scratch - reg +//;BIT0=0 AsicDebug is enabled +//;BIT1=0 SLT S3 runs +#define FCH_ECMOS_REG01 0x01 +#define FCH_ECMOS_REG02 0x02 +#define FCH_ECMOS_REG03 0x03 +#define FCH_ECMOS_REG04 0x04 +#define FCH_ECMOS_REG05 0x05 +#define FCH_ECMOS_REG06 0x06 +#define FCH_ECMOS_REG07 0x07 +#define FCH_ECMOS_REG08 0x08 // save 32BIT Physical address of Config structure +#define FCH_ECMOS_REG09 0x09 +#define FCH_ECMOS_REG0A 0x0A +#define FCH_ECMOS_REG0B 0x0B + +#define FCH_ECMOS_REG0C 0x0C //;save MODULE_ID +#define FCH_ECMOS_REG0D 0x0D //;Reserve for NB + +// +// FCH SMI Base (FCH_SMI_BASE) +// offset : 0x0200 +// +#define FCH_SMIx0C_Level 0xFED8020Cul // Level +#define FCH_SMIx58_EHCI_WAKE 0xFED80258ul // EHCI WAKE +#define FCH_SMIx78_XHCI_WAKE 0xFED80278ul // XHCI WAKE + +#define FCH_SMIx88_SmiStatus2 0xFED80288ul // SmiStatus2 +#define FCH_SMIx88_SmiStatus2_UsbSmiEvent76 ( 1 << 12 ) + +// +// FCH PMIO Base (FCH_PMIO_BASE) +// offset : 0x0300 +// +#define FCH_PMIOx10_Power_Reset_Config 0xFED80310ul //Power Reset Config +#define FCH_PMIOx10_Power_Reset_Config_ToggleAllPwrGoodOnCf9 (1 << 1) + +#define FCH_PMIOx74_AcpiConfig 0xFED80374ul // AcpiConfig +#define FCH_PMIOx74_AcpiConfig_PwnBtnEn (1 << 8) +#define FCH_PMIOx74_AcpiConfig_AcpiReducedHwEn (1 << 9) + +#define FCH_PMIOxC0_S5ResetStatus 0xFED803C0ul // S5ResetStatus +#define FCH_PMIOxC0_S5ResetStatus_ThermalTrip (1 << 0) +#define FCH_PMIOxC0_S5ResetStatus_FourSecondPwrBtn (1 << 1) +#define FCH_PMIOxC0_S5ResetStatus_S_Status (0x3ff | (1 << 20)) +#define FCH_PMIOxC0_S5ResetStatus_All_Status 0x3FFF03FFul + +#define FCH_PMxC8_Misc 0xFED803C8ul // Misc +#define FCH_PMxC8_Misc_UseAcpiStraps (1 << 4) + +#define FCH_PMxE8_SDFlashCntrl 0xFED803E8ul // SDFlashCntrl +#define FCH_PMxE8_SDFlashCntrl_SdCd2Acpi (1 << 5) +// +// FCH MISC Base (FCH_MISC_BASE) +// offset : 0x0E00 +// +#define FCH_MISCx28_ClkDrvStr2 0xFED80E28ul // ClkDrvStr2 + +#define FCH_MISCx40_MiscClkCntl1 0xFED80E40ul // MiscClkCntl1 +#define FCH_MISCx40_MiscClkCntl1_CG1PLL_FBDIV_Test (1 << 26) + +#define FCH_MISCx50_JTAG_Control_ECO_bits 0xFED80E50ul // JTAG_Control_ECO_bits +#define FCH_MISCx50_JTAG_Control_ECO_bits_BIT12 (1 << 12) +#define FCH_MISCx50_JTAG_Control_ECO_bits_BIT16 (1 << 16) + +// FCH GPIO +// offset : 0x1500 +// +#define FCH_GPIOx018_AGPIO6_LDT_RST_L 0xFED81518ul // +#define FCH_GPIOx10C_DEVSLP0_EGPIO67 0xFED8160Cul // + +// FCH XHC PM (FCH_XHC_PM) +// offset : 0x1C00 +// +#define FCH_XHC_PMx00_Configure0 0xFED81C00ul // +#define FCH_XHC_PMx00_Configure0_XHC_SMIB_EN BIT21 +#define FCH_XHC_PMx10_Xhc_Memory_Configure 0xFED81C10ul // +#define FCH_XHC_PMx18_Usb20_Link_Status 0xFED81C18ul // +#define FCH_XHC_PMx20_Usb20_Wake_Control 0xFED81C20ul // +#define FCH_XHC_PMx24_Misc0 0xFED81C24ul // +#define FCH_XHC_PMx28_Misc1 0xFED81C28ul // +#define FCH_XHC_PMx2C_Misc2 0xFED81C2Cul // +#define FCH_XHC_PMx30_Xhci10_Enable 0xFED81C30ul // +#define FCH_XHC_PMx60_xHC_Battery_Charger_Enable 0xFED81C60ul // + + + + +// FCH AOAC Base (FCH_AOAC_BASE) +// offset : 0x1E00 +// +#define FCH_AOACx40_D3_CONTROL 0xFED81E40ul // +#define FCH_AOACx41_D3_STATUS 0xFED81E40ul // +#define FCH_AOACx5E_SATA_D3_CONTROL 0xFED81E5Eul // +#define FCH_AOACx6E_USB3_D3_CONTROL 0xFED81E6Eul // +#define FCH_AOACx70_SD_D3_CONTROL 0xFED81E70ul // +#define FCH_AOACx7A_IMC_D3_CONTROL 0xFED81E7Aul // +#define FCH_AOACx88Shadow_Register_SRAM_Addr 0xFED81E88ul // +#define FCH_AOACx8CShadow_Register_SRAM_Data 0xFED81E8Cul // +#define FCH_AOACx94S013_CONTROL 0xFED81E94ul // +#define FCH_AOACx94S013_CONTROL_ARBITER_DIS (1 << 14) +#define FCH_AOACx94S013_CONTROL_INTERRUPT_DIS (1 << 15) +#define FCH_AOACx9C_Shadow_Timer_Control 0xFED81E9Cul // +#define FCH_AOACx9C_Shadow_Timer_Control_ShadowHpetEn (1 << 0) // +#define FCH_AOACx9C_Shadow_Timer_Control_ShadowAcpiTimerEn (1 << 1) // + +#define FCH_AOACxA0_PwrGood_Control 0xFED81EA0ul // + +#define FCH_AOAC_REG00 0x00 // PerfMonControl +#define FCH_AOAC_REG04 0x04 // PerfMonTimeLimit +#define FCH_AOAC_REG08 0x08 // PerfMonWeight[3:0] +#define FCH_AOAC_REG0C 0x0C // PerfMonWeight[7:4] +#define FCH_AOAC_REG10 0x10 // PerfMonTrafficCnt[1:0] +#define FCH_AOAC_REG14 0x14 // PerfMonTrafficCnt[3:2] +#define FCH_AOAC_REG18 0x18 // PerfMonTrafficCnt[5:4] +#define FCH_AOAC_REG1C 0x1C // PerfMonTrafficCnt[7:6] +#define FCH_AOAC_REG20 0x20 // PerfMonTrafficCntAll +#define FCH_AOAC_REG24 0x24 // PerfMonIntrCnt +#define FCH_AOAC_REG28 0x28 // +#define FCH_AOAC_REG2C 0x2C // +#define FCH_AOAC_REG30 0x30 // Alternative HPET Timer +#define FCH_AOAC_REG34 0x34 // Alternative HPET Timer (HIGH 32BITS) +#define FCH_AOAC_REG38 0x38 // Alternative HPET Alarm +#define FCH_AOAC_REG3C 0x3C // Alternative HPET Alarm (HIGH 32BITS) +/* +FCH_AOAC_REG4X-7x Control field +*/ +#define AOAC_TARGET_DEVICE_STATE (BIT0 + BIT1) // TargetedDeviceState - + // 00 - D0 un-initialized + // 01 - D0 initialized + // 10 - D1/D2/D3hot + // 11 - D3cold + // +#define AOAC_DEVICE_STATE BIT2 // DeviceState + // 0 - Device power is removed + // 1 - Device power is applied +#define AOAC_PWR_ON_DEV BIT3 // PwrOnDev - + // If IsSwControl==0, software can write this bit to trigger a HW + // controlled power-down or reset sequence to the device. + // 0 - Power down the device. + // 1 - Power up the device. + // +#define AOAC_SW_PWR_ON_RSTB BIT4 // SwPwrOnRstB - + // + // 0 - PwrRstB is asserted to the device if IsSwControl==1. + // 1 - 1=PwrRstB is de-asserted to the device if IsSwControl==1. + // +#define AOAC_SW_REF_CLK_OK BIT5 // SwRefClkOk - + // + // 0 - 0=RefClkOk is de-asserted to the device if IsSwControl==1. + // 1 - RefClkOk is asserted to the device if IsSwControl==1. + // +#define AOAC_SW_RST_B BIT6 // SwRstB - + // 0 - RstB is asserted to the device if IsSwControl==1. + // 1 - RstB is deasserted to the device if IsSwControl==1. + // +#define AOAC_IS_SW_CONTROL BIT7 // IsSwControl + // To avoid glitch on the reset signals, software must set bit IsSwControl first before programming bit + // SwPwrOnRstB, SwRefClkOk and SwRstB. + // 0 - Hardware controls control signals (PwrRstB, RefClkOk, RstB) to the device. + // 1 - Software controls control signals (PwrRstB, RefClkOk, RstB) to the device. + // +/* +FCH_AOAC_REG4X-7x State field +*/ +#define A0AC_PWR_RST_STATE BIT0 +#define AOAC_RST_CLK_OK_STATE BIT1 +#define AOAC_RST_B_STATE BIT2 +#define AOAC_DEV_OFF_GATING_STATE BIT3 +#define AOAC_D3COLD BIT4 +#define AOAC_CLK_OK_STATE BIT5 +#define AOAC_STAT0 BIT6 +#define AOAC_STAT1 BIT7 +#define FCH_AOAC_REG40 0x40 // ClkGen Control +#define FCH_AOAC_REG41 0x41 // ClkGen State +#define FCH_AOAC_REG42 0x42 // AB Control +#define FCH_AOAC_REG43 0x43 // AB State +#define FCH_AOAC_REG44 0x44 // ACPI S0 Control +#define FCH_AOAC_REG45 0x45 // ACPI S0 State +#define FCH_AOAC_REG46 0x46 // ACPI S5 Control +#define FCH_AOAC_REG47 0x47 // ACPI S5 State +#define FCH_AOAC_REG48 0x48 // LPC Control +#define FCH_AOAC_REG49 0x49 // LPC State +#define FCH_AOAC_REG4A 0x4A // I_2_C 0 Control +#define FCH_AOAC_REG4B 0x4B // I_2_C 0 State +#define FCH_AOAC_REG4C 0x4C // I_2_C 1 Control +#define FCH_AOAC_REG4D 0x4D // I_2_C 1 State +#define FCH_AOAC_REG4E 0x4E // I_2_C 2 Control +#define FCH_AOAC_REG4F 0x4F // I_2_C 2 State +#define FCH_AOAC_REG50 0x50 // I_2_C 3 Control +#define FCH_AOAC_REG51 0x51 // I_2_C 3 State + +#define FCH_AOAC_REG56 0x56 // UART0 Control +#define FCH_AOAC_REG57 0x57 // UART0 State +#define FCH_AOAC_REG58 0x58 // UART1 Control +#define FCH_AOAC_REG59 0x59 // UART1 State + +#define FCH_AOAC_REG5E 0x5E // SATA Control +#define FCH_AOAC_REG5F 0x5F // SATA State + +#define FCH_AOAC_REG62 0x62 // AMBA Control +#define FCH_AOAC_REG63 0x63 // AMBA State +#define FCH_AOAC_REG64 0x64 // USB2 Control +#define FCH_AOAC_REG65 0x65 // USB2 State + +#define FCH_AOAC_REG6E 0x6E // USB3 Control +#define FCH_AOAC_REG6F 0x6F // USB3 State +#define FCH_AOAC_REG70 0x70 // SD Control +#define FCH_AOAC_REG71 0x71 // SD State + +#define FCH_AOAC_REG76 0x76 // eSPI Control +#define FCH_AOAC_REG77 0x77 // eSPI State + +#define FCH_AOAC_REG7A 0x7A // IMC Control +#define FCH_AOAC_REG7B 0x7B // IMC State +#define FCH_AOAC_REG7C 0x7C // NB Control +#define FCH_AOAC_REG7D 0x7D // NB State +#define FCH_AOAC_REG7E 0x7E // APU Control +#define FCH_AOAC_REG7F 0x7F // APU State +#define FCH_AOAC_REG80 0x80 // +#define FCH_AOAC_REG84 0x84 // +#define FCH_AOAC_REG88 0x88 // +#define FCH_AOAC_REG8C 0x8C // +#define FCH_AOAC_REG90 0x90 // +#define FCH_AOAC_REG94 0x94 // +#define FCH_AOAC_REG98 0x98 // +#define FCH_AOAC_REG9C 0x9C // +#define FCH_AOAC_REGA0 0xA0 // +#define FCH_AOAC_REGA4 0xA4 // +#define FCH_AOAC_REGA8 0xA8 // +#define FCH_AOAC_REGAC 0xAC // +#define FCH_AOAC_REGB0 0xB0 // +#define FCH_AOAC_REGB4 0xB4 // +#define FCH_AOAC_REGB8 0xB8 // +#define FCH_AOAC_REGBC 0xBC // +#define FCH_AOAC_REGC0 0xC0 // +#define FCH_AOAC_REGC4 0xC4 // +#define FCH_AOAC_REGC8 0xC8 // +#define FCH_AOAC_REGCC 0xCC // +#define FCH_AOAC_REGD0 0xD0 // +#define FCH_AOAC_REGD4 0xD4 // +#define FCH_AOAC_REGD8 0xD8 // +#define FCH_AOAC_REGDC 0xDC // +#define FCH_AOAC_REGE0 0xE0 // +#define FCH_AOAC_REGE4 0xE4 // +#define FCH_AOAC_REGE8 0xE8 // +#define FCH_AOAC_REGEC 0xEC // +#define FCH_AOAC_REGF0 0xF0 // +#define FCH_AOAC_REGF4 0xF4 // +#define FCH_AOAC_REGF8 0xF8 // +#define FCH_AOAC_REGFC 0xFC // +#define FCH_AOACx98S013_DEBUG 0xFED81E98ul // +#define FCH_AOACx98S013_DEBUG_BYPASS_SHDW_TMR (1 << 8) +#define FCH_AOACx98S013_DEBUG_BYPASS_SHDW_REG (1 << 9) +//Set S0I3_BypassShdwTmr in AOAC offset 0x98 bit 8 to 0 +//Set S0I3_BypassShdwReg in AOAC offset 0x98 bit 9 to 1 + +#define FCH_AOACx9CS013_TIMER_CONTROL 0xFED81E9Cul // +#define FCH_AOACx9CS013_TIMER_CONTROL_SHADOW_HPET_EN (1 << 0) +#define FCH_AOACx9CS013_TIMER_CONTROL_EARLY_COUNT_UNIT (1 << 2) +#define FCH_AOACx9CS013_TIMER_CONTROL_EARLY_COUNT_MASK (0xff << 8) +#define FCH_AOACx9CS013_TIMER_CONTROL_EARLY_COUNT_VALUE (0x23 << 8) +//Set ShadowHPETEn in AOAC offset 0x9C bit 0 to 1 +//Set EarlyCountUnit in AOAC offset 0x9C bit 2 to 1 +//Program EarlyCount in AOAC offset 0x9C bit[15:8]. (please set 0x23 for now) + + +#define FCH_AL2AHBx10_CONTROL 0xFEDC0010ul // +#define FCH_AL2AHBx10_CONTROL_CLOCK_GATE_EN (1 << 1) + +#define FCH_AL2AHBx30_HCLK_CONTROL 0xFEDC0030ul // +#define FCH_AL2AHBx30_HCLK_CONTROL_CLOCK_GATE_EN (1 << 1) + +#define FCH_IOMAP_REG00 0x000 // Dma_C 0 +#define FCH_IOMAP_REG02 0x002 // Dma_C 1 +#define FCH_IOMAP_REG04 0x004 // Dma_C 2 +#define FCH_IOMAP_REG06 0x006 // Dma_C 3 +#define FCH_IOMAP_REG08 0x008 // Dma_Status +#define FCH_IOMAP_REG09 0x009 // Dma_WriteRest +#define FCH_IOMAP_REG0A 0x00A // Dma_WriteMask +#define FCH_IOMAP_REG0B 0x00B // Dma_WriteMode +#define FCH_IOMAP_REG0C 0x00C // Dma_Clear +#define FCH_IOMAP_REG0D 0x00D // Dma_MasterClr +#define FCH_IOMAP_REG0E 0x00E // Dma_ClrMask +#define FCH_IOMAP_REG0F 0x00F // Dma_AllMask +#define FCH_IOMAP_REG20 0x020 // IntrCntrlReg1 +#define FCH_IOMAP_REG21 0x021 // IntrCntrlReg2 +#define FCH_IOMAP_REG40 0x040 // TimerC0 +#define FCH_IOMAP_REG41 0x041 // TimerC1 +#define FCH_IOMAP_REG42 0x042 // TimerC2 +#define FCH_IOMAP_REG43 0x043 // Tmr1CntrlWord +#define FCH_IOMAP_REG61 0x061 // Nmi_Status +#define FCH_IOMAP_REG70 0x070 // Nmi_Enable +#define FCH_IOMAP_REG71 0x071 // RtcDataPort +#define FCH_IOMAP_REG72 0x072 // AlternatRtcAddrPort +#define FCH_IOMAP_REG73 0x073 // AlternatRtcDataPort +#define FCH_IOMAP_REG80 0x080 // Dma_Page_Reserved0 +#define FCH_IOMAP_REG81 0x081 // Dma_PageC2 +#define FCH_IOMAP_REG82 0x082 // Dma_PageC3 +#define FCH_IOMAP_REG83 0x083 // Dma_PageC1 +#define FCH_IOMAP_REG84 0x084 // Dma_Page_Reserved1 +#define FCH_IOMAP_REG85 0x085 // Dma_Page_Reserved2 +#define FCH_IOMAP_REG86 0x086 // Dma_Page_Reserved3 +#define FCH_IOMAP_REG87 0x087 // Dma_PageC0 +#define FCH_IOMAP_REG88 0x088 // Dma_Page_Reserved4 +#define FCH_IOMAP_REG89 0x089 // Dma_PageC6 +#define FCH_IOMAP_REG8A 0x08A // Dma_PageC7 +#define FCH_IOMAP_REG8B 0x08B // Dma_PageC5 +#define FCH_IOMAP_REG8C 0x08C // Dma_Page_Reserved5 +#define FCH_IOMAP_REG8D 0x08D // Dma_Page_Reserved6 +#define FCH_IOMAP_REG8E 0x08E // Dma_Page_Reserved7 +#define FCH_IOMAP_REG8F 0x08F // Dma_Refres +#define FCH_IOMAP_REG92 0x092 // FastInit +#define FCH_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1 +#define FCH_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2 +#define FCH_IOMAP_REGC0 0x0C0 // Dma2_C4Addr +#define FCH_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt +#define FCH_IOMAP_REGC4 0x0C4 // Dma2_C5Addr +#define FCH_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt +#define FCH_IOMAP_REGC8 0x0C8 // Dma2_C6Addr +#define FCH_IOMAP_REGCA 0x0CA // Dma2_C6Cnt +#define FCH_IOMAP_REGCC 0x0CC // Dma2_C7Addr +#define FCH_IOMAP_REGCE 0x0CE // Dma2_C7Cnt +#define FCH_IOMAP_REGD0 0x0D0 // Dma_Status +#define FCH_IOMAP_REGD2 0x0D2 // Dma_WriteRest +#define FCH_IOMAP_REGD4 0x0D4 // Dma_WriteMask +#define FCH_IOMAP_REGD6 0x0D6 // Dma_WriteMode +#define FCH_IOMAP_REGD8 0x0D8 // Dma_Clear +#define FCH_IOMAP_REGDA 0x0DA // Dma_Clear +#define FCH_IOMAP_REGDC 0x0DC // Dma_ClrMask +#define FCH_IOMAP_REGDE 0x0DE // Dma_ClrMask +#define FCH_IOMAP_REGED 0x0ED // DUMMY IO PORT +#define FCH_IOMAP_REGF0 0x0F0 // NCP_Error +#define FCH_IOMAP_REG40B 0x040B // DMA1_Extend +#define FCH_IOMAP_REG4D0 0x04D0 // IntrEdgeControl +#define FCH_IOMAP_REG4D6 0x04D6 // DMA2_Extend +#define FCH_IOMAP_REGC00 0x0C00 // Pci_Intr_Index +#define FCH_IOMAP_REGC01 0x0C01 // Pci_Intr_Data +#define FCH_IOMAP_REGC14 0x0C14 // Pci_Error +#define FCH_IOMAP_REGC50 0x0C50 // CMIndex +#define FCH_IOMAP_REGC51 0x0C51 // CMData +#define FCH_IOMAP_REGC52 0x0C52 // GpmPort +#define FCH_IOMAP_REGC6F 0x0C6F // Isa_Misc +#define FCH_IOMAP_REGCD0 0x0CD0 // PMio2_Index +#define FCH_IOMAP_REGCD1 0x0CD1 // PMio2_Data +#define FCH_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index +#define FCH_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data +#define FCH_IOMAP_REGCD6 0x0CD6 // PM_Index +#define FCH_IOMAP_REGCD7 0x0CD7 // PM_Data +#define FCH_IOMAP_REGCF9 0x0CF9 // CF9Rst reg + +#define FCH_IRQ_INTA 0x00 // INTA# +#define FCH_IRQ_INTB 0x01 // INTB# +#define FCH_IRQ_INTC 0x02 // INTC# +#define FCH_IRQ_INTD 0x03 // INTD# +#define FCH_IRQ_INTE 0x04 // INTE# +#define FCH_IRQ_INTF 0x05 // INTF# +#define FCH_IRQ_INTG 0x06 // INTG# +#define FCH_IRQ_INTH 0x07 // INTH# +#define FCH_IRQ_SCI 0x10 // SCI +#define FCH_IRQ_SMBUS0 0x11 // SMBUS0 +#define FCH_IRQ_ASF 0x12 // ASF +#define FCH_IRQ_HDAUDIO 0x13 // HD Audio +#define FCH_IRQ_FC 0x14 // FC +#define FCH_IRQ_GEC 0x15 // GEC +#define FCH_IRQ_SD 0x17 // SD +#define FCH_IRQ_IMCINT0 0x20 // IMC INT0 +#define FCH_IRQ_IMCINT1 0x21 // IMC INT1 +#define FCH_IRQ_IMCINT2 0x22 // IMC INT2 +#define FCH_IRQ_IMCINT3 0x23 // IMC INT3 +#define FCH_IRQ_IMCINT4 0x24 // IMC INT4 +#define FCH_IRQ_IMCINT5 0x25 // IMC INT5 +#define FCH_IRQ_USB18INTA 0x30 // Dev 18 (USB) INTA# +#define FCH_IRQ_USB18INTB 0x31 // Dev 18 (USB) INTB# +#define FCH_IRQ_USB19INTA 0x32 // Dev 19 (USB) INTA# +#define FCH_IRQ_USB19INTB 0x33 // Dev 19 (USB) INTB# +#define FCH_IRQ_USB22INTA 0x34 // Dev 22 (USB) INTA# +#define FCH_IRQ_USB22INTB 0x35 // Dev 22 (USB) INTB# +#define FCH_IRQ_USB20INTC 0x36 // Dev 20 (USB) INTC# +#define FCH_IRQ_IDE 0x40 // IDE pci interrupt +#define FCH_IRQ_SATA 0x41 // SATA pci interrupt +#define FCH_IRQ_GPPINT0 0x50 // Gpp Int0 +#define FCH_IRQ_GPPINT1 0x51 // Gpp Int1 +#define FCH_IRQ_GPPINT2 0x52 // Gpp Int2 +#define FCH_IRQ_GPPINT3 0x53 // Gpp Int3 +#define FCH_IRQ_GPIO 0x62 // GPIO Controller +#define FCH_IRQ_I2C0 0x70 // I2C0 Controller +#define FCH_IRQ_I2C1 0x71 // I2C1 Controller +#define FCH_IRQ_I2C2 0x72 // I2C2 Controller +#define FCH_IRQ_I2C3 0x73 // I2C3 Controller +#define FCH_IRQ_UART0 0x74 // UART0 Controller +#define FCH_IRQ_UART1 0x75 // UART1 Controller +#define FCH_IRQ_IOAPIC 0x80 // Select IRQ routing to IoApic mode +#define FCH_IRQ_PIC 0x00 // Select IRQ routing to PIC mode + +#define FCH_IRQ_INTERNAL_SHARE 0x07 // Fch Internal Shared IRQ +#define FCH_IRQ_GPIO_IRQ FCH_IRQ_INTERNAL_SHARE +#define FCH_IRQ_I2C0_IRQ 3 +#define FCH_IRQ_I2C1_IRQ 15 +#define FCH_IRQ_I2C2_IRQ 6 +#define FCH_IRQ_I2C3_IRQ 14 +#define FCH_IRQ_UART0_IRQ 10 +#define FCH_IRQ_UART1_IRQ 11 + + +#define FCH_SPI_MMIO_REG00 0x00 //SPI_ +#define FCH_SPI_OPCODE 0x000000FFl // +#define FCH_SPI_TX_COUNT 0x00000F00l // +#define FCH_SPI_RX_COUNT 0x0000F000l // +#define FCH_SPI_EXEC_OPCODE 0x00010000l // +#define FCH_SPI_FIFO_PTR_CRL 0x00100000l // +#define FCH_SPI_FIFO_PTR_INC 0x00200000l // +#define FCH_SPI_BUSY 0x80000000l // +#define FCH_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register +#define FCH_SPI_PARAMETER 0x000000FFl // +#define FCH_SPI_FIFO_PTR 0x00000700l // +#define FCH_SPI_BYTE_PROGRAM 0xFF000000l // +#define FCH_SPI_MMIO_REG1C 0x1C // +#define FCH_SPI_RETRY_TIMES 0x3 // + +#define FCH_SPI_MMIO_REG1D 0x1D // +#define FCH_SPI_MMIO_REG1E 0x1E // +#define FCH_SPI_MMIO_REG1F 0x1F // +#define FCH_SPI_MMIO_REG4E 0x4E // + +#define FCH_SPI_MMIO_REG1F_X05_TX_BYTE_COUNT 0x05 // +#define FCH_SPI_MMIO_REG1F_X06_RX_BYTE_COUNT 0x06 // + +#define FCH_SPI_MMIO_REG20 0x20 // +#define FCH_SPI_MMIO_REG22 0x22 // +#define FCH_SPI_MMIO_REG2C 0x2C // +#define FCH_SPI_MMIO_REG38 0x38 // +#define FCH_SPI_MMIO_REG3C 0x3C // + +#define FCH_SPI_MMIO_REG45_CMDCODE 0x45 // +#define FCH_SPI_MMIO_REG47_CMDTRIGGER 0x47 // +#define FCH_SPI_MMIO_REG48_TXBYTECOUNT 0x48 // +#define FCH_SPI_MMIO_REG4B_RXBYTECOUNT 0x4B // +#define FCH_SPI_MMIO_REG4C_SPISTATUS 0x4C // +#define FCH_SPI_MMIO_REG80_FIFO 0x80 // + +#define FCH_SPI_MODE_FAST 0x7 // +#define FCH_SPI_MODE_NORMAL 0x6 // +#define FCH_SPI_MODE_QUAL_144 0x5 // +#define FCH_SPI_MODE_QUAL_122 0x4 // +#define FCH_SPI_MODE_QUAL_114 0x3 // +#define FCH_SPI_MODE_QUAL_112 0x2 // + +#define FCH_SPI_DEVICE_MODE_DIS 0x7 // +#define FCH_SPI_DEVICE_MODE_144 0x4 // +#define FCH_SPI_DEVICE_MODE_114 0x3 // +#define FCH_SPI_DEVICE_MODE_122 0x2 // +#define FCH_SPI_DEVICE_MODE_112 0x1 // +#define FCH_SPI_DEVICE_MODE_FAST 0x0 // + +#define FCH_SPI_SPEED_16M 0x4 // +#define FCH_SPI_SPEED_22M 0x3 // +#define FCH_SPI_SPEED_33M 0x2 // +#define FCH_SPI_SPEED_66M 0x1 // +#define FCH_SPI_SPEED_100M 0x5 // + +#define AMD_NB_REG78 0x78 +#define AMD_NB_SCRATCH AMD_NB_REG78 +#define MailBoxPort 0x3E + +#define MAX_LT_POLLINGS 0x4000 +#define SMI_TIMER_ENABLE BIT15 + +#define ACPIMMIO32(x) (*(volatile UINT32*)(UINTN)(x)) +#define ACPIMMIO16(x) (*(volatile UINT16*)(UINTN)(x)) +#define ACPIMMIO8(x) (*(volatile UINT8*)(UINTN)(x)) + +#define U3PLL_LOCK BIT7 +#define U3PLL_RESET BIT8 +#define U3PHY_RESET BIT9 +#define U3CORE_RESET BIT10 +#define XHC0_FUNC_RESET BIT11 +#define XHC1_FUNC_RESET BIT12 + +#define XHCI_ACPI_MMIO_AMD_REG00 0x00 +#define XHCI_ACPI_MMIO_AMD_REG04 0x04 +#define XHCI_ACPI_MMIO_AMD_REG08 0x08 +#define XHCI_ACPI_MMIO_AMD_REG10 0x10 +#define XHCI_ACPI_MMIO_AMD_REG14 0x14 +#define XHCI_ACPI_MMIO_AMD_REG20 0x20 +#define XHCI_ACPI_MMIO_AMD_REG24 0x24 +#define XHCI_ACPI_MMIO_AMD_REG28 0x28 +#define XHCI_ACPI_MMIO_AMD_REG30 0x30 +#define XHCI_ACPI_MMIO_AMD_REG40 0x40 +#define XHCI_ACPI_MMIO_AMD_REG48 0x48 // USB3.0_Ind_REG Index +#define XHCI_ACPI_MMIO_AMD_REG4C 0x4C // USB2.0_Ind_REG Data +#define XHCI_ACPI_MMIO_AMD_REG8C 0x8C +#define XHCI_ACPI_MMIO_AMD_REG90 0x90 // adaptation timer settings +#define XHCI_ACPI_MMIO_AMD_REG98 0x98 +#define XHCI_ACPI_MMIO_AMD_REGA0 0xA0 // BAR 0 +#define XHCI_ACPI_MMIO_AMD_REGA4 0xA4 // BAR 1 +#define XHCI_ACPI_MMIO_AMD_REGA8 0xA8 // BAR 2 +#define XHCI_ACPI_MMIO_AMD_REGB0 0xB0 // SPI_Valid_Base. +#define XHCI_ACPI_MMIO_AMD_REGC0 0xC0 // Firmware starting offset for coping +#define XHCI_ACPI_MMIO_AMD_REGB4 0xB4 +#define XHCI_ACPI_MMIO_AMD_REGD0 0xD0 + +#define FCH_XHCI_REG48 0x48 // XHCI IND_REG Index registers +#define FCH_XHCI_REG4C 0x4C // XHCI IND_REG Data registers + +#define FCH_XHCI_IND60_BASE 0x40000000ul // + +#define FCH_XHCI_IND60_REG00 FCH_XHCI_IND60_BASE + 0x00 // +#define FCH_XHCI_IND60_REG04 FCH_XHCI_IND60_BASE + 0x04 // +#define FCH_XHCI_IND60_REG08 FCH_XHCI_IND60_BASE + 0x08 // +#define FCH_XHCI_IND60_REG0C FCH_XHCI_IND60_BASE + 0x0C // +#define FCH_XHCI_IND60_REG18 FCH_XHCI_IND60_BASE + 0x18 // +#define FCH_XHCI_IND60_REG48 FCH_XHCI_IND60_BASE + 0x48 // +#define FCH_XHCI_IND60_REG50 FCH_XHCI_IND60_BASE + 0x50 // +#define FCH_XHCI_IND60_REG54 FCH_XHCI_IND60_BASE + 0x54 // +#define FCH_XHCI_IND60_REG58 FCH_XHCI_IND60_BASE + 0x58 // +#define FCH_XHCI_IND60_REG5C FCH_XHCI_IND60_BASE + 0x5C // +#define FCH_XHCI_IND60_REG68 FCH_XHCI_IND60_BASE + 0x68 // +#define FCH_XHCI_IND60_REG6C FCH_XHCI_IND60_BASE + 0x6C // + +#define FCH_XHCI_IND_REG00 0x00 // +#define FCH_XHCI_IND_REG04 0x04 // +#define FCH_XHCI_IND_REG48 0x48 // +#define FCH_XHCI_IND_REG54 0x54 // +#define FCH_XHCI_IND_REG88 0x88 // +#define FCH_XHCI_IND_REG94 0x94 // adaptation mode settings +#define FCH_XHCI_IND_REG98 0x98 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REGC8 0xC8 // +#define FCH_XHCI_IND_REGD4 0xD4 // adaptation mode settings +#define FCH_XHCI_IND_REGD8 0xD8 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REG100 0x100 // +#define FCH_XHCI_IND_REG120 0x120 // +#define FCH_XHCI_IND_REG128 0x128 // +#define FCH_XHCI_IND_REG200 0x200 // +#define FCH_XHCI_IND_REG240 0x240 // +#define FCH_XHCI_IND_REG280 0x280 // +#define FCH_XHCI_IND_REG2C0 0x2C0 // +#define MAX_XHCI_PORTS 0x04 + +//SMBUS +#define FCH_SMB_IOREG00 0x00 // SMBusStatus +#define FCH_SMB_IOREG01 0x01 // SMBusSlaveStatus +#define FCH_SMB_IOREG02 0x02 // SMBusControl +#define FCH_SMB_IOREG03 0x03 // SMBusHostCmd +#define FCH_SMB_IOREG04 0x04 // SMBusAddress +#define FCH_SMB_IOREG05 0x05 // SMBusData0 +#define FCH_SMB_IOREG06 0x06 // SMBusData1 +#define FCH_SMB_IOREG07 0x07 // SMBusBlockData +#define FCH_SMB_IOREG08 0x08 // SMBusSlaveControl +#define FCH_SMB_IOREG14 0x14 // SMBusAutoPoll +#define FCH_SMB_IOREG16 0x16 // SMBusPausePoll +#define FCH_SMB_IOREG17 0x17 // SMBusHostCmd2 + +#define FCH_SMB_CMD_QUICK 0x00 << 2 // Quick Read or Write +#define FCH_SMB_CMD_BYTE 0x01 << 2 // Byte Read or Write +#define FCH_SMB_CMD_BYTE_DATA 0x02 << 2 // Byte Data Read or Write +#define FCH_SMB_CMD_WORD_DATA 0x03 << 2 // Word Data Read or Write +#define FCH_SMB_CMD_BLOCK 0x05 << 2 // Block Read or Write + +#define FCH_SMB_ALL_HOST_STATUS 0x1f // HostBusy+SMBInterrupt+DeviceErr+BusCollision+Failed +#define FCH_SMB_CMD_BYTE_DATA_START 0x48 // Byte Data Read or Write +#define FCH_SMB_CMD_START BIT6 +#define FCH_SMB_READ_ENABLE BIT0 +#define FCH_SMB_AUTO_POLL_EN BIT0 +#define FCH_SMB_POLL2BYTE BIT7 + +#define SBTSI_ADDR 0x98 +#define SBTSI_REG01 0x01 +#define SBTSI_REG09 0x09 +#define SBTSI_REG10 0x10 +#define SBTSI_READORDER BIT5 + +#define FCH_EC_ENTER_CONFIG 0X5A +#define FCH_EC_EXIT_CONFIG 0XA5 +#define FCH_EC_REG07 0X07 +#define FCH_EC_REG30 0X30 +#define FCH_EC_REG60 0X60 +#define FCH_EC_REG61 0X61 + +#define FCH_IMC_ROMSIG 0x55aa55aaul + +#define SPI_HEAD_LENGTH 0x0E +#define SPI_BAR0_VLD 0x01 +#define SPI_BASE0 (0x00 << 7) +#define SPI_BAR1_VLD (0x01 << 8) +#define SPI_BASE1 (SPI_HEAD_LENGTH << 10) +#define SPI_BAR2_VLD (0x01 << 16) +#define SPI_BASE2(x) ((SPI_HEAD_LENGTH + ACPIMMIO16(x)) << 18) + +#define FW_TO_SIGADDR_OFFSET 0x0C +#define BCD_ADDR_OFFSET 0x02 +#define BCD_SIZE_OFFSET 0x04 +#define FW_ADDR_OFFSET 0x06 +#define FW_SIZE_OFFSET 0x08 +#define ACD_ADDR_OFFSET 0x0A +#define ACD_SIZE_OFFSET 0x0C +#define XHC_BOOT_RAM_SIZE 0x8000 + +#define PKT_DATA_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x00 +#define PKT_LEN_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x14 +#define PKT_CTRL_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x15 +#define EFUS_DAC_ADJUSTMENT_CONTROL 0x850A8ul +#define BGADJ 0x1F +#define DACADJ 0x1B +#define EFUS_DAC_ADJUSTMENT_CONTROL_DATA (BGADJ + (DACADJ << 8) + BIT16 ) + +#define KABINI_OSC_OUT_CLOCK_SEL_48MHz 0x02 +#define KABINI_OSC_OUT_CLOCK_SEL_25MHz 0x01 + +#define KERN_OSC_OUT_CLOCK_SEL_48MHz 0x02 +#define KERN_OSC_OUT_CLOCK_SEL_25MHz 0x01 + +#define RTC_WORKAROUND_SECOND 0x00 +#define RTC_VALID_SECOND_VALUE 0x59 +#define RTC_SECOND_RESET_VALUE 0x30 +#define RTC_SECOND_LOWER_NIBBLE 0x0F +#define RTC_VALID_SECOND_VALUE_LN 0x09 + +#ifndef FCH_DEADLOOP + #define FCH_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif + +#define OHCI_ARB_REGQ_VLD_EN BIT2 + +#define HCEx40_Control 0xFED80040ul +#define HCEx44_Input 0xFED80044ul +#define HCEx48_Output 0xFED80048ul +#define HCEx4C_Status 0xFED8004Cul +#define HCEx50_IntrEn 0xFED80050ul +#define EmulationSmiEn BIT4 + +#define FCH_PMx08_PciControl 0xFED80308ul // PCI Control +#define FCH_PMx08_PciControl_ShutDownOption BIT20 + +#define FCH_PMxD2_PmioDebug 0xFED803D2ul // Pmio Debug +#define FCH_PMxD6_Imc_Gating 0xFED803D6ul // IMC Gating +#define FCH_PMxEC_LpcGating 0xFED803ECul // LPC Gating + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/FchPlatform.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/FchPlatform.h new file mode 100644 index 0000000000..ca2a8d89a5 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/FchPlatform.h @@ -0,0 +1,117 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH platform definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FCH_PLATFORM_H_ +#define _FCH_PLATFORM_H_ + +#define MAX_SATA_PORTS 8 + +#include "AGESA.h" + +#ifndef FCHOEM_ACPI_RESTORE_SWSMI + #define FCHOEM_BEFORE_PCI_RESTORE_SWSMI 0xD3 + #define FCHOEM_AFTER_PCI_RESTORE_SWSMI 0xD4 + #define FCHOEM_ENABLE_ACPI_SWSMI 0xA0 + #define FCHOEM_DISABLE_ACPI_SWSMI 0xA1 + #define FCHOEM_START_TIMER_SMI 0xBC + #define FCHOEM_STOP_TIMER_SMI 0xBD +#endif + +#ifndef FCHOEM_SPI_UNLOCK_SWSMI + #define FCHOEM_SPI_UNLOCK_SWSMI 0xAA +#endif +#ifndef FCHOEM_SPI_LOCK_SWSMI + #define FCHOEM_SPI_LOCK_SWSMI 0xAB +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_LOW + #define FCHOEM_ACPI_TABLE_RANGE_LOW 0xE0000ul +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_HIGH + #define FCHOEM_ACPI_TABLE_RANGE_HIGH 0xFFFF0ul +#endif + +#ifndef FCHOEM_ACPI_BYTE_CHECHSUM + #define FCHOEM_ACPI_BYTE_CHECHSUM 0x100 +#endif + +#ifndef FCHOEM_IO_DELAY_PORT + #define FCHOEM_IO_DELAY_PORT 0x80 +#endif + +#ifndef FCHOEM_OUTPUT_DEBUG_PORT + #define FCHOEM_OUTPUT_DEBUG_PORT 0x80 +#endif + +#define FCH_PCIRST_BASE_IO 0xCF9 +#define FCH_PCI_RESET_COMMAND06 0x06 +#define FCH_PCI_RESET_COMMAND0E 0x0E +#define FCH_KBDRST_BASE_IO 0x64 +#define FCH_KBC_RESET_COMMAND 0xFE +#define FCH_ROMSIG_BASE_IO 0x20000l +#define FCH_ROMSIG_SIGNATURE 0x55AA55AAul +#define FCH_MAX_TIMER 0xFFFFFFFFul +#define FCH_GEC_INTERNAL_REG 0x6804 +#define FCH_HPET_REG_MASK 0xFFFFF800ul +#define FCH_FAKE_USB_BAR_ADDRESS 0x58830000ul + + +#ifndef FCHOEM_ELAPSED_TIME_UNIT + #define FCHOEM_ELAPSED_TIME_UNIT 28 +#endif + +#ifndef FCHOEM_ELAPSED_TIME_DIVIDER + #define FCHOEM_ELAPSED_TIME_DIVIDER 100 +#endif + +#include "Fch.h" +#include "amdlib.h" +#include "FchCommonCfg.h" +#include "AcpiLib.h" +#include "FchDef.h" +#include "FchBiosRamUsage.h" +#include "AmdFch.h" + +extern BUILD_OPT_CFG UserOptions; + +#endif // _FCH_PLATFORM_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h new file mode 100644 index 0000000000..a20ec19f55 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h @@ -0,0 +1,200 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH registers definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#define KERN_FCH_SATA_DID 0x7900 +#define KERN_FCH_SATA_AHCI_DID 0x7901 +#define KERN_FCH_SATA_AMDAHCI_DID 0x7904 + +#define KERN_FCH_USB_XHCI_DID 0x7914 // Dev 0x10 Func 0 +#define KERN_FCH_USB_EHCI_DID 0x7908 // Dev 0x12 Func 0 +#define KERN_FCH_SMBUS_DID 0x790B // Dev 0x14 Func 0 +#define KERN_FCH_LPC_DID 0x790E // Dev 0x14 Func 3 +#define KERN_FCH_SD_DID 0x7906 // Dev 0x14 Func 7 + +#define KERN_EHCI1_BUS_DEV_FUN ((0x12 << 3) + 0) +#define KERN_EHCI1_BUS 0 +#define KERN_EHCI1_DEV 18 +#define KERN_EHCI1_FUNC 0 +#define KERN_EHCI2_BUS_DEV_FUN ((0x13 << 3) + 0) +#define KERN_EHCI2_BUS 0 +#define KERN_EHCI2_DEV 19 +#define KERN_EHCI2_FUNC 0 +#define KERN_EHCI3_BUS_DEV_FUN ((0x16 << 3) + 0) +#define KERN_EHCI3_BUS 0 +#define KERN_EHCI3_DEV 22 +#define KERN_EHCI3_FUNC 0 + +// Specific FCH register for Kern +#define FCH_EHCI_REG64 0x64 +#define FCH_EHCI_REGA4 0xA4 + +// HD Audio/Azalia +#define KERN_EVENT_HD_AUDIO_MSI_ENABLE 0x02010100ul // HD Audio/Azalia MSI enable. +#define KERN_EVENT_HD_AUDIO_DISABLE 0x02010101ul // HD Audio/Azalia Disable. +#define KERN_EVENT_HD_AUDIO_CONFIG_CODEC 0x02010102ul // HD Audio/Azalia Configure CODEC. +#define KERN_EVENT_HD_AUDIO_CONFIG_CODEC_BUSY 0x02010103ul // HD Audio/Azalia Configure CODEC Reset. +#define KERN_ERROR_HD_AUDIO_RESET 0x02030100ul // HD Audio/Azalia Reset Failure. +#define KERN_ERROR_HD_AUDIO_CODEC 0x02030101ul // HD Audio/Azalia Codec Not Found. +// HW ACPI +#define KERN_EVENT_HWACPI_PROG_ACPI_PMTBL 0x02010200ul // FCH program ACPI PM Controller Base Address. +#define KERN_EVENT_HWACPI_PROG_ACPI_MMIO_IN_RESET 0x02010201ul // FCH program ACPIMMIO registers in RESET. +#define KERN_EVENT_HWACPI_PROG_SCI_MAP 0x02010202ul // FCH program SCI map by OEM table (ACPIMMIO 0xFED803xx). +#define KERN_EVENT_HWACPI_PROG_GPIO_MAP 0x02010203ul // FCH program GPIO setting by OEM table (ACPIMMIO 0xFED801xx). +#define KERN_EVENT_HWACPI_PROG_SATA_PHY 0x02010204ul // FCH program SATA PHY by OEM table. +#define KERN_EVENT_RTC_DAYLIGHT_SAVING_TIME 0x02010205ul // FCH RTC DayLight Saving Workaround. +#define KERN_EVENT_RTC_CLEAR_BANK_SELECTION 0x02010206ul // FCH RTC clear BankSelection 0x0A Bit4 prevent error. +#define KERN_EVENT_RTC_WA 0x02010207ul // FCH RTC workaround is set. +#define KERN_EVENT_KBD_CONNECTED_THRU_USB 0x02010208ul // FCH IRQ1/IRQ12 connected to USB controller. +#define KERN_EVENT_LEGACY_FREE_SET 0x02010209ul // FCH None Legacy IO setting. +#define KERN_EVENT_ENABLED_ASF_REMOTE_CTRL 0x0201020Aul // FCH Enable ASF remote control function. +#define KERN_EVENT_PCIEXP_WAKESTATUS_WA 0x0201020Bul // FCH PciExp Wake Status Workaround. +#define KERN_EVENT_HWACPI_PROG_OEM_MMIOTBL_IN_RESET 0x0201020Cul // FCH program OEM/Platform BIOS ACPIMMIO registers. +#define KERN_EVENT_HWACPI_PROG_MMIOTBL 0x02010200ul // FCH program ACPIMMIO registers. (1st.) +#define KERN_EVENT_HWACPI_NO_SIOKBC_ENABLE 0x02010201ul // FCH No SIO/KBC function is enabled. +#define KERN_EVENT_HWACPI_NO_SIOKBC_DISABLE 0x02010202ul // FCH No SIO/KBC function is disabled. +#define KERN_EVENT_HWACPI_PROG_SPECIFIC_MMIOTBL 0x02010203ul // FCH program Specific ACPIMMIO registers. (2nd.) +#define KERN_EVENT_HWACPI_PROG_OEM_MMIOTBL 0x02010204ul // FCH program OEM/Platform BIOS ACPIMMIO registers (3rd.) +#define KERN_EVENT_HWACPI_SPREAD_SPECTRUM 0x02010205ul // FCH Enable Spread Spectrum function. +#define KERN_EVENT_HWACPI_INT_CLK_SET 0x02010206ul // FCH Set Intermal Clock Display as 48Mhz. +#define KERN_EVENT_HPET_TIMER_TICK_INTERVAL_WA_SET 0x02010207ul // FCH HPET timer tick interval workaround is set. +#define KERN_EVENT_C1E_ENABLE 0x02010208ul // FCH C1e Enabled. +#define KERN_EVENT_NATIVEPCIE_MODE_SET 0x02010208ul // FCH Native PCIe mode is set. +#define KERN_ERROR_HPET_TBL_NOT_FOUND 0x02030200ul // FCH HPET Table does not found. +// HWM +#define KERN_EVENT_IMC_DISABLE 0x02010300ul // FCH HWM/IMC is disabled. +#define KERN_EVENT_IMC_ENABLE 0x02010301ul // FCH HWM/IMC is enabled. +// IMC +#define KERN_EVENT_IMC_SW_TOGGLE_EVENT 0x02010302ul // FCH IMC Software Toggle Strapping. (IMC statement change) +#define KERN_EVENT_EC_ENABLE 0x02020303ul // FCH EC enabled. +#define KERN_EVENT_EC_KBD_ENABLE 0x02010304ul // FCH IMC EC KBD enabled. +#define KERN_EVENT_EC_CHANNEL0_ENABLE 0x02010305ul // FCH IMC EC channel0 function enabled. +#define KERN_EVENT_IMC_INTO_SLEEP_MODE 0x02010306ul // FCH IMC goes into sleep mode. +#define KERN_EVENT_IMC_CRASH_RESET 0x02010307ul // FCH IMC Crash Reset to prevent repeating the reset forever. +#define KERN_EVENT_IMC_SW_DISABLE_IMC 0x02010308ul // FCH Software disable IMC thru mailbox command. +#define KERN_EVENT_IMC_DISABLE_SUREBOOT_TIMMER 0x02010309ul // FCH Disable SureBoot Timmer. +#define KERN_EVENT_IMC_WAKEUP 0x0201030Aul // FCH IMC wakeup command. +#define KERN_EVENT_IMC_IDLE 0x0201030Bul // FCH IMC idle command. +#define KERN_EVENT_EC_DISABLE 0x0201030Cul // FCH EC disable by jumper setting or board config. +#define KERN_ERROR_IMC_FW_VALIDATE_FAILED 0x02030300ul // FCH IMC firmware validation failure. +// PCIE/AB +#define KERN_EVENT_AB_SLOW_SPEED_ABLINK_CLOCK 0x02010400ul // FCH Set Low Speed AB link clock. +#define KERN_EVENT_AB_RESET_CPU_ON_SYNC_FLOOD 0x02010401ul // FCH set AB reset CPU on sync flood enabled. +#define KERN_EVENT_AB_CLOCK_GATING_ENABLE 0x02010402ul // FCH set AB Clock Gating function enabled. +#define KERN_EVENT_AB_CLOCK_GATING_DISABLE 0x02010403ul // FCH set AB clock Gating function disabled. +#define KERN_EVENT_AB_DMA_MEMORY_W3264B_ENABLE 0x02010404ul // FCH set AB DMA MEMORY Write 32/64B enabled. +#define KERN_EVENT_AB_DMA_MEMORY_W3264B_DISABLED 0x02010405ul // FCH set AB DMA MEMORY Write 32/64B disabled. +#define KERN_EVENT_AB_MEMORY_POWERSAVING_ENABLED 0x02010406ul // FCH Set AB Memory Power Saving enabled. +#define KERN_EVENT_AB_MEMORY_POWERSAVING_DISABLED 0x02010407ul // FCH Set AB Memory Power Saving disabled. +#define KERN_EVENT_AB_ALINK_CLK_GATEOFF_ENABLED 0x02010408ul // FHC set ALink clock Gate-off enabled. +#define KERN_EVENT_AB_ALINK_CLK_GATEOFF_DISABLED 0x02010409ul // FHC set ALink clock Gate-off disabled. +#define KERN_EVENT_AB_BLINK_CLK_GATEOFF_ENABLED 0x0201040Aul // FHC set BLink clock Gate-off enabled. +#define KERN_EVENT_AB_BLINK_CLK_GATEOFF_DISABLED 0x0201040Bul // FHC set BLink clock Gate-off disabled. +// SATA +#define KERN_EVENT_SATA_ENABLE 0x02010500ul // FCH set SATA controller enabled. +#define KERN_EVENT_SATA_MAX_GEN2_MODE_ENABLE 0x02010501ul // FCH set SATA support only Max. GEN2 mode. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_ORG_EXT 0x02010502ul // FCH set SATA clock source as external 48Mhz. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_ORG_INT 0x02010502ul // FCH set SATA clock source as internal 48Mhz. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_100_INT 0x02010503ul // FCH set SATA clock source as internal 100Mhz. +#define KERN_EVENT_SATA_STABLE_MEM_SHUTDOWN_ENABLE 0x02010504ul // FCH set SATA stable memory sutdown enable * Misc. +#define KERN_EVENT_SATA_PROG_SATA_PORT_PHY 0x02010505ul // FCH programming SATA port's PHY. +#define KERN_EVENT_SATA_READ_SQUELCH_FROM_EFUSE 0x02010506ul // FCH programming SATA squelch value from eFuse. +#define KERN_EVENT_SATA_DISABLE 0x02010507ul // FCH set SATA controller disabled. +#define KERN_EVENT_SATA_AHCI_MODE 0x02010508ul // FCH set SATA as AHCI mode. +#define KERN_EVENT_SATA_IDE_2_AHCI_MODE 0x02010509ul // FCH set SATA as IDE_2_AHCI mode. +#define KERN_EVENT_SATA_IDE_MODE 0x0201050Aul // FCH set SATA as IDE mode. +#define KERN_EVENT_SATA_RAID_MODE 0x0201050Bul // FCH set SATA as RAID mode. +#define KERN_EVENT_SATA_MSI_CAP_ENABLE 0x0201050Cul // FCH set SATA MSI Capability Enabled. +#define KERN_EVENT_SATA_SUPPORT_8_DEVICE 0x0201050Dul // FCH set SATA support 8 device mode. +#define KERN_EVENT_SATA_DISABLED_GENERIC_MODE 0x0201050Eul // FCH set SATA disable generic mode. +#define KERN_EVENT_SATA_PHY_PLL_SHUTDOWN 0x0201050Ful // FCH set SATA PHY PLL shutdown. +#define KERN_EVENT_SATA_OOB_DETECTION_ENH 0x02010510ul // FCH set SATA OOB Detection Enhance Mode. +#define KERN_EVENT_SATA_MEM_POWER_SAVING 0x02010511ul // FCH set SATA memory power saving. +#define KERN_EVENT_SATA_DEV_SLP_PORT0 0x02010512ul // FCH set SATA Deep Sleep Mode on Port0. +#define KERN_EVENT_SATA_DEV_SLP_PORT1 0x02010513ul // FCH set SATA Deep Sleep Mode on Port1. +#define KERN_EVENT_SATA_AHCI_DIS_PREFETCH 0x02010514ul // FCH set SATA AHCI disable Prefetch. +#define KERN_EVENT_SATA_PORT_MULT_CAP 0x02010515ul // FCH set SATA Port Mult Capability Enabled. +#define KERN_EVENT_SATA_FIS_BASE_SWITCHING 0x02010516ul // FCH set SATA support FIS-based switching. +#define KERN_EVENT_SATA_AGGR_LINK_PM_CAP 0x02010517ul // FCH set SATA aggressive link power management. +#define KERN_EVENT_SATA_PSC_CAP 0x02010518ul // FCH set SATA support partial state. +#define KERN_EVENT_SATA_SSC_CAP 0x02010519ul // FCH set SATA support Slumber mode. +#define KERN_EVENT_SATA_CCC_CAP 0x0201051Aul // FCH set SATA support command completion coalescing. +#define KERN_EVENT_SATA_AHCI_ENCLOSURE_MANAGEMENT 0x0201051Bul // FCH set SATA support Enclosure Management. +#define KERN_EVENT_SATA_ESP_PORT_ENABLE 0x0201051Cul // FCH set SATA ESP ports (one of ESP ports are set). +#define KERN_EVENT_SATA_BIOS_OS_HANDOFF 0x0201051Dul // FCH set SATA HBA supports the BIOS/OS handoff mechanism. +#define KERN_EVENT_SATA_DRIVE_DETECTION 0x0201051Eul // FCH SATA is excuting SATA drive detection. +#define KERN_EVENT_SATA_CLK_AUTO_OFF 0x0201051Ful // FCH set SATA Auto Clock off function. +#define KERN_EVENT_SATA_PORT_GEN_MODE 0x02010520ul // FCH set SATA port GEN mode. +#define KERN_EVENT_SATA_HOT_REMOVAL_ENH 0x02010521ul // FCH set SATA hot removal enhance mode. +// SD +#define KERN_EVENT_SD_ENABLE 0x02010600ul // FCH set SD controller to enable. +#define KERN_EVENT_SD_AS_DMA_MODE 0x02010601ul // FCH set SD as DMA mode. +#define KERN_EVENT_SD_AS_PIO_MODE 0x02010602ul // FCH set SD as PIO mode. +#define KERN_EVENT_SD_AS_2_0_MODE 0x02010603ul // FCH set SD as 2.0 mode. +#define KERN_EVENT_SD_AS_3_0_MODE 0x02010604ul // FCH set SD as 3.0 mode. +#define KERN_EVENT_SD_CLOCK_MULTIPLIER 0x02010605ul // FCH set SD clock multiplier. +#define KERN_EVENT_SD_DISABLE 0x02010606ul // FCH set SD controller to disable. +// LPC/SPI +#define KERN_EVENT_LPC_CLK0_DISABLE 0x02010700ul // FCH set LPC0 clock disabled. +#define KERN_EVENT_LPC_CLK1_DISABLE 0x02010701ul // FCH set LPC1 clock disabled. +#define KERN_EVENT_LPC_LEGACY_FREE_MODE 0x02010702ul // FCH set LPC as legacy free mode. +#define KERN_EVENT_SPI_QUAL_MODE 0x02010703ul // FCH SPI Qual Mode is enabled (by user selection). +#define KERN_EVENT_SPI_SPEED 0x02010704ul // FCH SPI speed is set by user selection. +#define KERN_EVENT_SPI_FAST_SPEED 0x02010705ul // FCH SPI fast speed is set. +#define KERN_EVENT_SPI_QUALIFY_QUAL_MODE 0x02010706ul // FCH SPI Qual Mode is validated. +// USB +#define KERN_ERROR_USB_ROMSIG_NOT_FOUND 0x02030800ul // FCH ROMSIG not found. +#define KERN_ERROR_USB_XHCI_FW_FOUND 0x02030801ul // FCH XHCI firmware does not exist. +#define KERN_EVENT_USB_EHCI1_ENABLE 0x02010800ul // FCH set EHCI1 enable. +#define KERN_EVENT_USB_EHCI2_ENABLE 0x02010801ul // FCH set EHCI2 enable. +#define KERN_EVENT_USB_EHCI3_ENABLE 0x02010802ul // FCH set EHCI3 enable. +#define KERN_EVENT_USB_XHCI_DISABLE 0x02010803ul // FCH set XHCI disable. +#define KERN_EVENT_USB_PHY_POWER_DOWN 0x02010804ul // FCH set USB PHY powerdown enable. +#define KERN_EVENT_USB_PHY_CALIBRATED 0x02010805ul // FCH set USB PHY calibrated. +#define KERN_EVENT_USB_PORT_PHY_SETTING 0x02010806ul // FCH set USB Port PHY setting. +#define KERN_EVENT_USB_PORT_PHY_CLK_GATING 0x02010807ul // FCH set USB Port PHY Clock Gating. +#define KERN_EVENT_USB_XHCI_USED_PREDEFINE_ADDRESS 0x02010808ul // FCH XHCI ROM location is used user-define address. +#define KERN_EVENT_USB_XHCI_BOOTRAM_PRELOAD 0x02010809ul // FCH XHCI preload its BOOTRAM. +#define KERN_EVENT_USB_XHCI_INSTRUCTRAM_PRELOAD 0x0201080Aul // FCH XHCI preload its InstructionRAM. +#define KERN_EVENT_USB_XHCI_ROM_PREINIT_COMPLETED 0x0201080Bul // FCH XHCI preinit completed. +#define KERN_EVENT_USB_XHCI0_ENABLE 0x0201080Cul // FCH set XHCI0 enable. +#define KERN_EVENT_USB_XHCI1_ENABLE 0x0201080Dul // FCH set XHCI1 enable. diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.c b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.c new file mode 100644 index 0000000000..20a359ad0e --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.c @@ -0,0 +1,464 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * PSP Base Library + * + * Contains interface to the PSP library + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: PSP + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "AGESA.h" +#include "Filecode.h" +#include "PspBaseLib.h" + +#define FILECODE PROC_PSP_PSPBASELIB_PSPBASELIB_FILECODE +#define PSP_BAR1_TMP_BASE 0xFEA00000ul + +#define GET_PCI_BUS(Reg) (((UINT32) Reg >> 16) & 0xFF) +#define GET_PCI_DEV(Reg) (((UINT32) Reg >> 11) & 0x1F) +#define GET_PCI_FUNC(Reg) (((UINT32) Reg >> 8) & 0x7) +#define GET_PCI_OFFSET(Reg) ((UINT32)Reg & 0xFF) + +#define PCI_CONFIG_SMU_INDIRECT_INDEX 0xB8 ///< Gnb Offset index for SMU mbox +#define PCI_CONFIG_SMU_INDIRECT_DATA 0xBC ///< Gnb Offset data for SMU mbox + +#define SMU_CC_PSP_FUSES_STATUS 0xC0018000ul ///< offset in GNB to find PSP fusing +#define SMU_CC_PSP_FUSES_SECURE BIT0 ///< BIT0 +#define SMU_CC_PSP_FUSES_FRA_ENABLE BIT1 ///< BIT1 +#define SMU_CC_PSP_FUSES_PROTO BIT2 ///< BIT2 +#define PLATFORM_SECURE_BOOT_EN BIT4 ///< BIT4 + + +#define PSP_BLANK_PART 0 ///< Blank part +#define PSP_PROTO_PART SMU_CC_PSP_FUSES_PROTO ///< Proto Part +#define PSP_NON_SECURE_PART (SMU_CC_PSP_FUSES_PROTO + SMU_CC_PSP_FUSES_PCPU_DIS) ///< Non Secure Part +#define PSP_SECURE_PART (SMU_CC_PSP_FUSES_PROTO + SMU_CC_PSP_FUSES_SECURE) ///< Secure Part +#define PSP_FRA_MODE (SMU_CC_PSP_FUSES_FRA_ENABLE + SMU_CC_PSP_FUSES_PROTO + SMU_CC_PSP_FUSES_SECURE) ///< FRA Part + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + + + +UINT32 +PspLibPciReadConfig ( + IN UINT32 Register + ) +{ + UINT32 Value; + PCI_ADDR PciAddr; + + Value = 0; + PciAddr.AddressValue = MAKE_SBDFO (0, GET_PCI_BUS (Register), GET_PCI_DEV (Register), GET_PCI_FUNC (Register), GET_PCI_OFFSET (Register)); + + LibAmdPciRead (AccessWidth32, PciAddr, &Value, NULL); + + return Value; +} + +VOID +PspLibPciWriteConfig ( + IN UINT32 Register, + IN UINT32 Value + ) +{ + PCI_ADDR PciAddr; + PciAddr.AddressValue = MAKE_SBDFO (0, GET_PCI_BUS (Register), GET_PCI_DEV (Register), GET_PCI_FUNC (Register), GET_PCI_OFFSET (Register)); + + LibAmdPciWrite (AccessWidth32, PciAddr, &Value, NULL); + +} + +UINT32 +PspLibPciReadPspConfig ( + IN UINT16 Offset + ) +{ + return (PspLibPciReadConfig ((UINT32) (PSP_PCI_BDA + Offset))); +} + +VOID +PspLibPciWritePspConfig ( + IN UINT16 Offset, + IN UINT32 Value + ) +{ + PspLibPciWriteConfig ((UINT32) (PSP_PCI_BDA + Offset), Value); +} + +BOOLEAN +GetPspDirBase ( + IN OUT UINT32 *Address + ) +{ + UINTN i; + FIRMWARE_ENTRY_TABLE *FirmwareTableBase; + CONST UINT32 RomSigAddrTable[] = + { + 0xFFFA0000, // --> 512KB base + 0xFFF20000, // --> 1MB base + 0xFFE20000, // --> 2MB base + 0xFFC20000, // --> 4MB base + 0xFF820000, // --> 8MB base + 0xFF020000 // --> 16MB base + }; + + for (i = 0; i < sizeof (RomSigAddrTable) / sizeof (UINT32); i++) { + FirmwareTableBase = (FIRMWARE_ENTRY_TABLE *) (UINTN) RomSigAddrTable[i]; + // Search flash for unique signature 0x55AA55AA + if (FirmwareTableBase->Signature == FIRMWARE_TABLE_SIGNATURE) { + *Address = FirmwareTableBase->PspDirBase; + return TRUE; + } + } + + return (FALSE); +} + +BOOLEAN +PSPEntryInfo ( + IN PSP_DIRECTORY_ENTRY_TYPE EntryType, + IN OUT UINT64 *EntryAddress, + IN UINT32 *EntrySize + ) +{ + PSP_DIRECTORY *PspDir; + UINTN i; + + if (GetPspDirBase ((UINT32 *)&PspDir ) != TRUE) { + return FALSE; + } + + for (i = 0; i < PspDir->Header.TotalEntries; i++) { + if (PspDir->PspEntry[i].Type == EntryType) { + *EntryAddress = PspDir->PspEntry[i].Location; + *EntrySize = PspDir->PspEntry[i].Size; + return (TRUE); + } + } + + return (FALSE); +} + +/** + Check if PSP device is present + + @retval BOOLEAN 0: PSP Disabled, 1: PSP Enabled + +**/ +BOOLEAN +CheckPspDevicePresent ( + VOID + ) +{ + UINT32 SecureFuseReg; + PspLibPciWriteConfig ( (UINT32)PCI_CONFIG_SMU_INDIRECT_INDEX, (UINT32)SMU_CC_PSP_FUSES_STATUS); + SecureFuseReg = PspLibPciReadConfig ( (UINT32)PCI_CONFIG_SMU_INDIRECT_DATA); + + if (SecureFuseReg &= SMU_CC_PSP_FUSES_PROTO) { + return (TRUE); + } + return (FALSE); +} + +/** + Check PSP Platform Seucre Enable State + HVB & Secure S3 (Resume vector set to Dram, & core content will restore by uCode) + will be applied if Psp Plaform Secure is enabled + + @retval BOOLEAN 0: PSP Platform Secure Disabled, 1: PSP Platform Secure Enabled + +**/ +BOOLEAN +CheckPspPlatformSecureEnable ( + VOID + ) +{ + UINT32 SecureFuseReg; + PspLibPciWriteConfig ( (UINT32)PCI_CONFIG_SMU_INDIRECT_INDEX, (UINT32)SMU_CC_PSP_FUSES_STATUS); + SecureFuseReg = PspLibPciReadConfig ( (UINT32)PCI_CONFIG_SMU_INDIRECT_DATA); + + if (SecureFuseReg &= PLATFORM_SECURE_BOOT_EN) { + return (TRUE); + } + return (FALSE); +} + +/** + Check PSP Recovery Flag + Target will set Recovery flag if some PSP entry point by PSP directory has been corrupted. + + @retval BOOLEAN 0: Recovery Flag is cleared, 1: Recovery Flag has been set + +**/ +BOOLEAN +CheckPspRecoveryFlag ( + VOID + ) +{ + MBOX_STATUS *MboxStatus; + + //Init PSP MMIO + PspBarInitEarly (); + + GetPspMboxStatus (&MboxStatus); + + return (BOOLEAN) (MboxStatus->Recovery); +} + +/** + Return the PspMbox MMIO location + + + @retval BOOLEAN FALSE: ERROR, TRUE: SUCCEED + +**/ +BOOLEAN +GetPspMboxStatus ( + IN OUT MBOX_STATUS **MboxStatus + ) +{ + UINT32 PspMmio; + + if (GetPspBar1Addr (&PspMmio) == FALSE) { + return (FALSE); + } + + *MboxStatus = (MBOX_STATUS *)( (UINTN)PspMmio + PSP_MAILBOX_BASE + PSP_MAILBOX_STATUS_OFFSET); // PSPMbox base is at offset CP2MSG_28 ie. offset 28*4 = 0x70 + + return (TRUE); +} + +BOOLEAN +PspBarInitEarly (void) +{ + UINT32 PspMmioSize; + UINT32 Value32; + + if (PspLibPciReadPspConfig (PSP_PCI_DEVID_REG) == 0xffffffff) { + return (FALSE); + } + + //Check if PSP BAR has been assigned, if not do the PSP BAR initialation + if (PspLibPciReadPspConfig (PSP_PCI_BAR1_REG) == 0) { + /// Get PSP BAR1 Size + PspLibPciWritePspConfig (PSP_PCI_BAR1_REG, 0xFFFFFFFF); + PspMmioSize = PspLibPciReadPspConfig (PSP_PCI_BAR1_REG); + PspMmioSize = ~PspMmioSize + 1; + /// Assign BAR1 Temporary Address + PspLibPciWritePspConfig (PSP_PCI_BAR1_REG, PSP_BAR1_TMP_BASE); + PspLibPciWritePspConfig ( PSP_PCI_CMD_REG, 0x06); + + /// Enable GNB redirection to this space @todo use equate & also find proper fix + PspLibPciWriteConfig ( ( (0x18 << 11) + (1 << 8) + 0xBC), ((PSP_BAR1_TMP_BASE + PspMmioSize -1) >> 8) & ~0xFF); + PspLibPciWriteConfig ( ( (0x18 << 11) + (1 << 8) + 0xB8), (PSP_BAR1_TMP_BASE >> 8) | 3); + /// Enable MsixBarEn, Bar1En, Bar3En + PspLibPciWritePspConfig ( PSP_PCI_EXTRAPCIHDR_REG, 0x34); + /// Capability chain update + Value32 = PspLibPciReadPspConfig (PSP_PCI_MIRRORCTRL1_REG); + Value32 &= ~D8F0x44_PmNxtPtrW_MASK; + Value32 |= 0xA4; + PspLibPciWritePspConfig (PSP_PCI_MIRRORCTRL1_REG, Value32); + } + + return (TRUE); +} + +/** + Return the PspMMIO MMIO location + + @param[in] PspMmio Pointer to Psp MMIO address + + @retval BOOLEAN 0: Error, 1 Success +**/ +BOOLEAN +GetPspBar1Addr ( + IN OUT UINT32 *PspMmio + ) +{ + if (CheckPspDevicePresent () == FALSE) { + return (FALSE); + } + + *PspMmio = PspLibPciReadPspConfig (PSP_PCI_BAR1_REG); + + if ((*PspMmio) == 0xffffffff) { + return (FALSE); + } + + return (TRUE); +} + +/** + Return the PspMMIO MMIO location + + @param[in] PspMmio Pointer to Psp MMIO address + + @retval BOOLEAN 0: Error, 1 Success +**/ +BOOLEAN +GetPspBar3Addr ( + IN OUT UINT32 *PspMmio + ) +{ + if (CheckPspDevicePresent () == FALSE) { + return (FALSE); + } + + *PspMmio = PspLibPciReadPspConfig (PSP_PCI_BAR3_REG); + + if ((*PspMmio) == 0xffffffff) { + return (FALSE); + } + + return (TRUE); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Returns the access width mask for the processor + * + * + * @param[in] AccessWidth Access width + * @retval Width in number of bytes + */ + + +UINT8 +PspLibAccessWidth ( + IN ACCESS_WIDTH AccessWidth + ) +{ + UINT8 Width; + + switch (AccessWidth) { + case AccessWidth8: + case AccessS3SaveWidth8: + Width = 1; + break; + case AccessWidth16: + case AccessS3SaveWidth16: + Width = 2; + break; + case AccessWidth32: + case AccessS3SaveWidth32: + Width = 4; + break; + case AccessWidth64: + case AccessS3SaveWidth64: + Width = 8; + break; + default: + Width = 0; + } + return Width; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Read GNB indirect registers + * + * + * + * @param[in] Address PCI address of indirect register + * @param[in] IndirectAddress Offset of indirect register + * @param[in] Width Width + * @param[out] Value Pointer to value + */ +VOID +PspLibPciIndirectRead ( + IN PCI_ADDR Address, + IN UINT32 IndirectAddress, + IN ACCESS_WIDTH Width, + OUT VOID *Value + ) +{ + UINT32 IndexOffset; + + IndexOffset = PspLibAccessWidth (Width); + LibAmdPciWrite (Width, Address, &IndirectAddress, NULL); + Address.AddressValue += IndexOffset; + LibAmdPciRead (Width, Address, Value, NULL); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Write GNB indirect registers + * + * + * + * @param[in] Address PCI address of indirect register + * @param[in] IndirectAddress Offset of indirect register + * @param[in] Width Width + * @param[in] Value Pointer to value + */ +VOID +PspLibPciIndirectWrite ( + IN PCI_ADDR Address, + IN UINT32 IndirectAddress, + IN ACCESS_WIDTH Width, + IN VOID *Value + ) +{ + UINT32 IndexOffset; + + IndexOffset = PspLibAccessWidth (Width); + LibAmdPciWrite (Width, Address, &IndirectAddress, NULL); + Address.AddressValue += IndexOffset; + LibAmdPciWrite (Width, Address, Value, NULL); +} + + diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.h b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.h new file mode 100644 index 0000000000..c18e191780 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspBaseLib.h @@ -0,0 +1,187 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * PSP Base Library + * + * Contains interface to the PSP library + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: PSP + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PSP_BASE_LIB_H_ +#define _PSP_BASE_LIB_H_ + +#include "AMD.h" +#include "amdlib.h" +#include "PspDirectory.h" + +#define PSP_PCI_SEG 0x00 ///< PSP Seg address +#define PSP_PCI_BUS 0x00 ///< PSP Bus address +#define PSP_PCI_DEV 0x08 ///< PSP Device address +#define PSP_PCI_FN 0x00 ///< PSP Fn address +#define PSP_PCI_BDA ((PSP_PCI_DEV << 11) + (PSP_PCI_FN << 8)) +#define GET_PSP_PCI_ADDR (Offset) MAKE_SBDFO (PSP_PCI_SEG, PSP_PCI_BUS, PSP_PCI_DEV, PSP_PCI_FN, Offset) + +#define PSP_PCI_DEVID_REG 0x00 ///< DevId +#define PSP_PCI_CMD_REG 0x04 ///< CmdReg +#define PSP_PCI_BAR1_REG 0x18 ///< Pci Bar1 +#define PSP_PCI_BAR3_REG 0x20 ///< Pci Bar3 +#define PSP_PCI_MIRRORCTRL1_REG 0x44 ///< PSP Mirror Reg Ctrl 1 +#define PSP_PCI_EXTRAPCIHDR_REG 0x48 ///< Extra PCI Header Ctr +#define PSP_PCI_HTMSICAP_REG 0x5C ///< HT MSI Capability + +#define D8F0x44_PmNxtPtrW_MASK 0xff + +#define PSP_MAILBOX_BASE 0x70 ///< Mailbox base offset on PCIe BAR +#define PSP_MAILBOX_STATUS_OFFSET 0x4 ///< Staus Offset + +//====================================================================================== +// +// Define Mailbox Status field +// +//====================================================================================== +// +/// MBox Status MMIO space +/// +typedef struct { + UINT32 MboxInitialized:1; ///< Target will set this to 1 to indicate it is initialized (for ex. PSP/TPM ready) + UINT32 Error:1; ///< Target in adddtion to Done bit will also set this bit to indicate success/error on last command + UINT32 Terminated:1; ///< Target will set this bit if it aborted the command due to abort request + UINT32 Halt:1; ///< Target will set this error if there is critical error that require reset etc + UINT32 Recovery:1; ///< Target will set this error if some PSP entry point by PSP directory has been corrupted. + UINT32 Reserved:27; ///< Reserved +} MBOX_STATUS; + +// +// Above defined as bitmap +#define MBOX_STATUS_INITIALIZED 0x00000001ul ///< Mailbox Status: Initialized +#define MBOX_STATUS_ERROR 0x00000002ul ///< Mailbox Status: Error +#define MBOX_STATUS_ABORT 0x00000004ul ///< Mailbox Status: Abort +#define MBOX_STATUS_HALT 0x00000008ul ///< Mailbox Status: Halt +#define MBOX_STATUS_RECOVERY 0x00000010ul ///< Mailbox Status: Recovery required + + + +UINT32 +PspLibPciReadConfig ( + IN UINT32 Register + ); + +VOID +PspLibPciWriteConfig ( + IN UINT32 Register, + IN UINT32 Value + ); + +UINT32 +PspLibPciReadPspConfig ( + IN UINT16 Offset + ); + +VOID +PspLibPciWritePspConfig ( + IN UINT16 Offset, + IN UINT32 Value + ); + +BOOLEAN +GetPspDirBase ( + IN OUT UINT32 *Address +); + +BOOLEAN +PSPEntryInfo ( + IN PSP_DIRECTORY_ENTRY_TYPE EntryType, + IN OUT UINT64 *EntryAddress, + IN UINT32 *EntrySize + ); + +BOOLEAN +CheckPspDevicePresent ( + VOID + ); + +BOOLEAN +CheckPspPlatformSecureEnable ( + VOID + ); + +BOOLEAN +CheckPspRecoveryFlag ( + VOID + ); + +BOOLEAN +GetPspBar1Addr ( + IN OUT UINT32 *PspMmio + ); + +BOOLEAN +GetPspBar3Addr ( + IN OUT UINT32 *PspMmio + ); + + +BOOLEAN +GetPspMboxStatus ( + IN OUT MBOX_STATUS **MboxStatus + ); + + +BOOLEAN +PspBarInitEarly (void); + +VOID +PspLibPciIndirectRead ( + IN PCI_ADDR Address, + IN UINT32 IndirectAddress, + IN ACCESS_WIDTH Width, + OUT VOID *Value + ); + +VOID +PspLibPciIndirectWrite ( + IN PCI_ADDR Address, + IN UINT32 IndirectAddress, + IN ACCESS_WIDTH Width, + IN VOID *Value + ); + +UINT8 +PspLibAccessWidth ( + IN ACCESS_WIDTH AccessWidth + ); +#endif // _AMD_LIB_H_ diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspDirectory.h b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspDirectory.h new file mode 100644 index 0000000000..193cc6506c --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Psp/PspBaseLib/PspDirectory.h @@ -0,0 +1,94 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * PSP directory related functions Prototype definition + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: PSP + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PSP_DIRECTORY_H_ +#define _PSP_DIRECTORY_H_ + + +#define FIRMWARE_TABLE_SIGNATURE 0x55AA55AAul +/// Define the structure OEM signature table +typedef struct _FIRMWARE_ENTRY_TABLE { + UINT32 Signature; ///< Signature should be 0x55AA55AAul + UINT32 ImcRomBase; ///< Base Address for Imc Firmware + UINT32 GecRomBase; ///< Base Address for Gmc Firmware + UINT32 XHCRomBase; ///< Base Address for XHCI Firmware + UINT32 PspDirBase; ///< Base Address for PSP directory +} FIRMWARE_ENTRY_TABLE; + +/// Define structure for PSP directory +typedef struct { + UINT32 PspCookie; ///< "$PSP" + UINT32 Checksum; ///< 32 bit CRC of header items below and the entire table + UINT32 TotalEntries; ///< Number of PSP Entries + UINT32 Reserved; ///< Unused +} PSP_DIRECTORY_HEADER; + + +/// define various enum type for PSP entry type +enum _PSP_DIRECTORY_ENTRY_TYPE { + AMD_PUBLIC_KEY = 0, ///< PSP entry pointer to AMD public key + PSP_FW_BOOT_LOADER = 1, ///< PSP entry points to PSP boot loader in SPI space + PSP_FW_TRUSTED_OS = 2, ///< PSP entry points to PSP Firmware region in SPI space + PSP_FW_RECOVERY_BOOT_LOADER = 3, ///< PSP entry point to PSP recovery region. + PSP_NV_DATA = 4, ///< PSP entry points to PSP data region in SPI space + BIOS_PUBLIC_KEY = 5, ///< PSP entry points to BIOS public key stored in SPI space + BIOS_RTM_FIRMWARE = 6, ///< PSP entry points to BIOS RTM code (PEI volume) in SPI space + BIOS_RTM_SIGNATURE = 7, ///< PSP entry points to signed BIOS RTM hash stored in SPI space + SMU_OFFCHIP_FW = 8 ///< PSP entry points to SMU image +}; +typedef UINT32 PSP_DIRECTORY_ENTRY_TYPE; + +/// Structure for PSP Entry +typedef struct { + PSP_DIRECTORY_ENTRY_TYPE Type; ///< Type of PSP entry; 32 bit long + UINT32 Size; ///< Size of PSP Entry in bytes + UINT64 Location; ///< Location of PSP Entry (byte offset from start of SPI-ROM) +} PSP_DIRECTORY_ENTRY; + +/// Structure for PSP directory +typedef struct { + PSP_DIRECTORY_HEADER Header; ///< PSP directory header + PSP_DIRECTORY_ENTRY PspEntry[1]; ///< Array of PSP entries each pointing to a binary in SPI flash + ///< The actual size of this array comes from the + ///< header (PSP_DIRECTORY.Header.TotalEntries) +} PSP_DIRECTORY; + +#endif //_PSP_DIRECTORY_H_ diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/AGESA.c b/src/vendorcode/amd/pi/00660F01/binaryPI/AGESA.c new file mode 100644 index 0000000000..4352901d89 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/AGESA.c @@ -0,0 +1,543 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +// TODO This list needs to be pruned of anything that is not API +#include "AGESA.h" +#include "agesawrapper.h" +#include "FieldAccessors.h" +#include "AcpiLib.h" +#include "FchCommonCfg.h" +#include "Fch.h" +#include "FchDef.h" +#include "amdlib.h" +#include "cbfs.h" +#include <console/console.h> +#include <console/loglevel.h> + +// TODO Add a kconfig option to name the AGESA ROM file in CBFS +#define CONFIG_CBFS_AGESA_NAME "AGESA" + +// TODO These need to be replaced with calls to CreateStruct() +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ); + +CONST UINT32 ImageSignature = IMAGE_SIGNATURE; +CONST UINT32 ModuleSignature = MODULE_SIGNATURE; +CONST CHAR8 ModuleIdentifier[] = AGESA_ID; + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_CREATE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_RELEASE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResetParams->StdHeader.Func = AMD_INIT_RESET; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResetParams); +} + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EarlyParams->StdHeader.Func = AMD_INIT_EARLY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EarlyParams); +} + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + PostParams->StdHeader.Func = AMD_INIT_POST; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(PostParams); +} + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EnvParams->StdHeader.Func = AMD_INIT_ENV; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EnvParams); +} + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + MidParams->StdHeader.Func = AMD_INIT_MID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(MidParams); +} + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + LateParams->StdHeader.Func = AMD_INIT_LATE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(LateParams); +} + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + RecoveryParams->StdHeader.Func = AMD_INIT_RECOVERY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(RecoveryParams); +} + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResumeParams->StdHeader.Func = AMD_INIT_RESUME; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResumeParams); +} + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + S3LateParams->StdHeader.Func = AMD_S3LATE_RESTORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(S3LateParams); +} + +/********************************************************************** + * Interface call: AmdInitRtb + **********************************************************************/ +AGESA_STATUS +AmdInitRtb ( + IN OUT AMD_RTB_PARAMS *AmdInitRtbParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdInitRtbParams->StdHeader.Func = AMD_INIT_RTB; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdInitRtbParams); +} + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = AMD_LATE_RUN_AP_TASK; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamApic->StdHeader.Func = AMD_GET_APIC_ID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamApic); +} + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamGetPci->StdHeader.Func = AMD_GET_PCI_ADDRESS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamGetPci); +} + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamIdentify->StdHeader.Func = AMD_IDENTIFY_CORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamIdentify); +} + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + Event->StdHeader.Func = AMD_READ_EVENT_LOG; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(Event); +} + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdDimmIdentify->StdHeader.Func = AMD_IDENTIFY_DIMMS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdDimmIdentify); +} + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = -1; + return AGESA_UNSUPPORTED; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdGetDataEye->StdHeader.Func = AMD_GET_2D_DATA_EYE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdGetDataEye); +} + +/********************************************************************** + * FCH Functions + **********************************************************************/ + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +VOID +FchInitS3EarlyRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_EARLY_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +VOID +FchInitS3LateRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_LATE_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +// TODO This has to be removed +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_ALLOCATE_BUFFER; + + InterfaceParams.AllocationMethod = PreMemHeap; + InterfaceParams.NewStructPtr = AllocateHeapParams; + + return Dispatcher(&InterfaceParams); +} + +// TODO This has to be removed +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_DEALLOCATE_BUFFER; + + InterfaceParams.NewStructPtr = &BufferHandle; + + return Dispatcher(&InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_SET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + return status; +} + +/********************************************************************** + * Interface call: AmdGetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_GET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = *value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + + *value = AccessorParams.FieldValue; + size = AccessorParams.FieldSize; + + return status; +} diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/FieldAccessors.h b/src/vendorcode/amd/pi/00660F01/binaryPI/FieldAccessors.h new file mode 100644 index 0000000000..2d860c5005 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/FieldAccessors.h @@ -0,0 +1,118 @@ +/***************************************************************************** + * + * Copyright (c) 2013 - 2014, Sage Electronic Engineering, LLC + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FIELDACCESSORS_H_ +#define _FIELDACCESSORS_H_ + +/// AGESA value name +typedef enum { + AMD_GLOBAL_USER_OPTIONS = 0x00020000, + AMD_GLOBAL_NUM_SOCKETS = 0x00020001, + AMD_GLOBAL_NUM_MODULES = 0x00020002, +} AGESA_FIELD_NAME; + +typedef AGESA_STATUS (*SETTER_ENTRY) ( + IN OUT VOID* value, + IN UINT32 size + ); + +typedef AGESA_STATUS (*GETTER_ENTRY) ( + IN OUT VOID** value, + IN UINT32 size + ); + +/// Accessor Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_FIELD_NAME FieldName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< For pointers, how to allocate space for copied data + IN OUT VOID *Struct; ///< The struct for the service. + IN OUT UINT32 FieldSize; ///< The size of the data value. + IN OUT VOID *FieldValue; ///< The value retrieved or set into the target structure. +} AMD_ACCESSOR_PARAMS; + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValueDispatch ( + IN OUT AMD_ACCESSOR_PARAMS *AccessorParams + ); + +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ); + +/********************************************************************** + * Interface call: AmdGetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValueDispatch ( + IN OUT AMD_ACCESSOR_PARAMS *AccessorParams + ); + +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ); + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; + SETTER_ENTRY SetValueEntryPoint; + GETTER_ENTRY GetValueEntryPoint; +} ACCESSOR_DISPATCH_TABLE; + +AGESA_STATUS +GetUserOptions( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumSockets( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumModules( + IN OUT VOID** value, + IN UINT32 size + ); + +#endif /* _FIELDACCESSORS_H_ */ diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/OptionsIds.h b/src/vendorcode/amd/pi/00660F01/binaryPI/OptionsIds.h new file mode 100644 index 0000000000..bd39fcef20 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/OptionsIds.h @@ -0,0 +1,124 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 192403 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#include "Ids.h" + +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * + * Warning: When you enable the IDSOPT_CONTROL_NV_TO_CMOS feature. + * please make the cmos region defined by IDS_OPT_CMOS_REGION_START & + * IDS_OPT_CMOS_REGION_END can be touched between IDS HOOK point + * IDS_CPU_Early_Override and IDS_BEFORE_AP_EARLY_HALT of BSP + * + * IDSOPT_CONTROL_NV_TO_CMOS + * IDS_OPT_CMOS_INDEX_PORT + * IDS_OPT_CMOS_DATA_PORT + * IDS_OPT_CMOS_REGION_START + * IDS_OPT_CMOS_REGION_END + * + * IDSOPT_TRACING_ENABLED + * IDSOPT_TRACING_CONSOLE_HDTOUT + * IDSOPT_TRACING_CONSOLE_SERIALPORT + * IDSOPT_SERIAL_PORT (default 0x3F8) + * IDSOPT_TRACING_CONSOLE_REDIRECT_IO + * IDSOPT_DEBUG_PRINT_IO_PORT (default 0x80) + * IDSOPT_TRACING_CONSOLE_RAM + * IDSOPT_DPRAM_BASE + * IDSOPT_DPRAM_SIZE + * IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL (default FALSE) + * IDSOPT_CUSTOMIZE_TRACING_SERVICE + * IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT + * IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT + * + * IDSOPT_TRACE_BLD_CFG + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * IDSOPT_DEBUG_CODE_ENABLED + * IDSOPT_IDT_EXCEPTION_TRAP + * IDSOPT_C_OPTIMIZATION_DISABLED + * + **/ + + + +//#include "Ids.h" + +#define IDSOPT_ERROR_TRAP_ENABLED FALSE + +#ifdef DEBUG +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED FALSE +#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +#ifdef IDS_DEBUG_PRINT_MASK +#undef IDS_DEBUG_PRINT_MASK +#endif +#define IDS_DEBUG_PRINT_MASK (GNB_TRACE_ALL | GFX_MISC | CPU_TRACE_ALL | MEM_STATUS | TOPO_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT) +#define IDSOPT_SERIAL_PORT 0x3F8 +#define IDSOPT_HEAP_CHECKING TRUE +#define IDSOPT_TRACE_BLD_CFG TRUE +#define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE +#define IDSOPT_DEBUG_CODE_ENABLED TRUE +#define IDSOPT_C_OPTIMIZATION_DISABLED TRUE +#else +#define IDSOPT_IDS_ENABLED FALSE +//#define IDSOPT_ERROR_TRAP_ENABLED FALSE +//#define IDSOPT_CONTROL_ENABLED FALSE +#define IDSOPT_TRACING_ENABLED FALSE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +#define IDS_DEBUG_PRINT_MASK (0) +#endif + +#endif diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/gcc-intrin.h b/src/vendorcode/amd/pi/00660F01/binaryPI/gcc-intrin.h new file mode 100644 index 0000000000..c6b5c63378 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/gcc-intrin.h @@ -0,0 +1,744 @@ +/* + Compatibility <intrin_x86.h> header for GCC -- GCC equivalents of intrinsic + Microsoft Visual C++ functions. Originally developed for the ReactOS + (<http://www.reactos.org/>) and TinyKrnl (<http://www.tinykrnl.org/>) + projects. + + Copyright (c) 2006 KJK::Hyperion <hackbunny@reactos.com> + 2014 Sage Electronic Engineering, LLC + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in + all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. +*/ + +#if defined (__GNUC__) + +/* I/O intrin functions. */ +static +__inline__ __attribute__((always_inline)) +unsigned char __inbyte(unsigned short Port) +{ + unsigned char value; + + __asm__ __volatile__ ( + "in %%dx, %%al" + : "=a" (value) + : "d" (Port) + ); + + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned short __inword(unsigned short Port) +{ + unsigned short value; + + __asm__ __volatile__ ( + "in %%dx, %%ax" + : "=a" (value) + : "d" (Port) + ); + + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __indword(unsigned short Port) +{ + unsigned long value; + + __asm__ __volatile__ ( + "in %%dx, %%eax" + : "=a" (value) + : "d" (Port) + ); + return value; + +} + +static +__inline__ __attribute__((always_inline)) +void __outbyte(unsigned short Port,unsigned char Data) +{ + __asm__ __volatile__ ( + "out %%al, %%dx" + : + : "a" (Data), "d" (Port) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __outword(unsigned short Port,unsigned short Data) +{ + __asm__ __volatile__ ( + "out %%ax, %%dx" + : + : "a" (Data), "d" (Port) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __outdword(unsigned short Port,unsigned long Data) +{ + __asm__ __volatile__ ( + "out %%eax, %%dx" + : + : "a" (Data), "d" (Port) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __inbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; insb " + : "=D" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __inwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; insw " + : "=D" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __indwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; insl " + : "=D" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __outbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; outsb " + : "=S" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __outwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; outsw " + : "=S" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __outdwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "cld ; rep ; outsl " + : "=S" (Buffer), "=c" (Count) + : "d"(Port), "0"(Buffer), "1" (Count) + ); +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr0, %[value]" + : [value] "=a" (value) + ); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr1(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr1, %[value]" + : [value] "=a" (value) + ); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr2, %[value]" + : [value] "=a" (value) + ); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr3, %[value]" + : [value] "=a" (value) + ); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr7(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr7, %[value]" + : [value] "=a" (value) + ); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readdr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readdr0 (); + break; + + case 1: + return __readdr1 (); + break; + + case 2: + return __readdr2 (); + break; + + case 3: + return __readdr3 (); + break; + + case 7: + return __readdr7 (); + break; + + default: + return -1; + } +} + +static +__inline__ __attribute__((always_inline)) +void __writedr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%dr0" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writedr1(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%dr1" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writedr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%dr2" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writedr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%dr3" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writedr7(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%dr7" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writedr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writedr0 (Data); + break; + + case 1: + __writedr1 (Data); + break; + + case 2: + __writedr2 (Data); + break; + + case 3: + __writedr3 (Data); + break; + + case 7: + __writedr7 (Data); + break; + + default: + ; + } +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr0, %[value]" + : [value] "=a" (value)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr2, %[value]" + : [value] "=a" (value)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr3, %[value]" + : [value] "=a" (value)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr4(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr4, %[value]" + : [value] "=a" (value)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr8(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr8, %[value]" + : [value] "=a" (value)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readcr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readcr0 (); + break; + + case 2: + return __readcr2 (); + break; + + case 3: + return __readcr3 (); + break; + + case 4: + return __readcr4 (); + break; + + case 8: + return __readcr8 (); + break; + + default: + return -1; + } +} + +static +__inline__ __attribute__((always_inline)) +void __writecr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%cr0" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writecr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%cr2" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writecr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%cr3" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writecr4(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%cr4" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writecr8(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %%eax, %%cr8" + : + : "a" (Data) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __writecr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writecr0 (Data); + break; + + case 2: + __writecr2 (Data); + break; + + case 3: + __writecr3 (Data); + break; + + case 4: + __writecr4 (Data); + break; + + case 8: + __writecr8 (Data); + break; + + default: + ; + } +} + +static +__inline__ __attribute__((always_inline)) +UINT64 __readmsr(UINT32 msr) +{ + UINT64 retval; + __asm__ __volatile__( + "rdmsr\n\t" + : "=A" (retval) + : "c" (msr) + ); + return retval; +} + +static +__inline__ __attribute__((always_inline)) +void __writemsr (UINT32 msr, UINT64 Value) +{ + __asm__ __volatile__ ( + "wrmsr\n\t" + : + : "c" (msr), "A" (Value) + ); +} + +static +__inline__ __attribute__((always_inline)) +UINT64 __rdtsc(void) +{ + UINT64 retval; + __asm__ __volatile__ ( + "rdtsc" + : "=A" (retval)); + return retval; +} + +static +__inline__ __attribute__((always_inline)) +void __cpuid(int CPUInfo[], const int InfoType) +{ + __asm__ __volatile__( + "cpuid" + :"=a" (CPUInfo[0]), "=b" (CPUInfo[1]), "=c" (CPUInfo[2]), "=d" (CPUInfo[3]) + : "a" (InfoType) + ); +} + +static +__inline__ __attribute__((always_inline)) +void _disable(void) +{ + __asm__ __volatile__ ("cli"); +} + +static +__inline__ __attribute__((always_inline)) +void _enable(void) +{ + __asm__ __volatile__ ("sti"); +} + +static +__inline__ __attribute__((always_inline)) +void __halt(void) +{ + __asm__ __volatile__ ("hlt"); +} + +static +__inline__ __attribute__((always_inline)) +void __debugbreak(void) +{ + __asm__ __volatile__ ("int3"); +} + +static +__inline__ __attribute__((always_inline)) +void __wbinvd(void) +{ + __asm__ __volatile__ ("wbinvd"); +} + +static +__inline__ __attribute__((always_inline)) +void __lidt(void *Source) +{ + __asm__ __volatile__("lidt %0" : : "m"(*(short*)Source)); +} + +static +__inline__ __attribute__((always_inline)) +void __writefsbyte(const unsigned long Offset, const unsigned char Data) +{ + __asm__("movb %b[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data)); +} + +static +__inline__ __attribute__((always_inline)) +void __writefsword(const unsigned long Offset, const unsigned short Data) +{ + __asm__("movw %w[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data)); +} + +static +__inline__ __attribute__((always_inline)) +void __writefsdword(const unsigned long Offset, const unsigned long Data) +{ + __asm__("movl %k[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data)); +} + +static +__inline__ __attribute__((always_inline)) +unsigned char __readfsbyte(const unsigned long Offset) +{ + unsigned char value; + __asm__("movb %%fs:%a[Offset], %b[value]" : [value] "=q" (value) : [Offset] "irm" (Offset)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned short __readfsword(const unsigned long Offset) +{ + unsigned short value; + __asm__("movw %%fs:%a[Offset], %w[value]" : [value] "=q" (value) : [Offset] "irm" (Offset)); + return value; +} + +static +__inline__ __attribute__((always_inline)) +unsigned long __readfsdword(const unsigned long Offset) +{ + unsigned long value; + __asm__("movl %%fs:%a[Offset], %k[value]" : [value] "=q" (value) : [Offset] "irm" (Offset)); + return value; +} + +#ifdef __SSE3__ +typedef long long __v2di __attribute__ ((__vector_size__ (16))); +typedef long long __m128i __attribute__ ((__vector_size__ (16), __may_alias__)); + +static +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs2 (void *__A, __m128i __B) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_movntdq ((__v2di *)__A, (__v2di)__B); +} + +static +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs (void *__A, void *__B) +{ + __m128i data; + data = (__m128i) __builtin_ia32_lddqu ((char const *)__B); + _mm_stream_si128_fs2 (__A, data); +} + +static +__inline__ __attribute__((always_inline)) +void _mm_clflush_fs (void *__A) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_clflush (__A); +} + +static +__inline__ __attribute__((always_inline)) +void _mm_mfence (void) +{ + __builtin_ia32_mfence (); +} + +static +__inline__ __attribute__((always_inline)) +void _mm_sfence (void) +{ + __builtin_ia32_sfence (); +} +#endif + +static +__inline__ __attribute__((always_inline)) +void __stosb(unsigned char *dest, unsigned char data, size_t count) +{ + __asm__ __volatile__ ( + "cld ; rep ; stosb " + : "=D" (dest), "=c" (count) + : "a"(data), "0"(dest), "1" (count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void __movsb(unsigned char *dest, unsigned char *data, size_t count) +{ + __asm__ __volatile__ ( + "cld ; rep ; movsb " + : "=D" (dest), "=S"(data), "=c" (count) + : "S"(data), "0"(dest), "1" (count) + ); +} + +static +__inline__ __attribute__((always_inline)) +void debug_point ( unsigned short Port, unsigned long Data ) +{ + __outdword (Port, Data); + __asm__ __volatile__ (".word 0xfeeb"); + +} + +static +__inline__ __attribute__((always_inline)) +void delay_point ( unsigned short Port, unsigned long Data, unsigned long delayTime ) +{ + UINTN Index; + Index = 0; + __outdword (Port, Data); + while (Index < delayTime * 600000) { + __outdword (0xE0, 0); + Index ++; + } +} +#endif // defined (__GNUC__) diff --git a/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc new file mode 100644 index 0000000000..d6782a3d29 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/binaryPI/gcccar.inc @@ -0,0 +1,1335 @@ +/* + * Copyright (c) 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/****************************************************************************** +* AMD Generic Encapsulated Software Architecture +* +* $Workfile:: GccCar.inc $Revision:: 32932 $ +* +* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier +* +******************************************************************************/ + +.altmacro + +BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */ +BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */ +BSP_STACK_SIZE_64K = 0x10000 /*64KB for BSP core */ +BSP_STACK_SIZE_32K = 0x8000 /*32KB for BSP core*/ + +CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */ +CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */ +CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */ +CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */ + +APIC_BASE_ADDRESS = 0x0000001B + APIC_BSC = 8 /* Boot Strap Core */ + +APIC_MSG_REG = 0x380 # Location of BSC message + APIC_MSG = 0x00DE00AD # Message data +APIC_CMD_LO_REG = 0x300 # APIC command low +APIC_CMD_HI_REG = 0x310 # APIC command high + CMD_REG_TO_READ_DATA = 0x00000338 # APIC command for remote read of APIC_MSG_REG + REMOTE_READ_STS = 0x00030000 # Remote read status mask + REMOTE_DELIVERY_PEND = 0x00010000 # Remote read is pending + REMOTE_DELIVERY_DONE = 0x00020000 # Remote read is complete + DELIVERY_STS_BIT = 12 #Delivery status valid bit +APIC_ID_REG = 0x0020 # Local APIC ID offset + APIC20_APICID = 24 +APIC_REMOTE_READ_REG = 0x00C0 # Remote read offset + +# Flags can only run from bits 31 to 24. Bits 23:0 are in use. +AMD_CU_NEED_TO_WAIT = 31 +AMD_CU_SEND_INVD_MSG = 30 +AMD_CU_RESTORE_ES = 29 + +AMD_MTRR_VARIABLE_BASE0 = 0x0200 +AMD_MTRR_VARIABLE_BASE6 = 0x020C +AMD_MTRR_VARIABLE_BASE7 = 0x020E + VMTRR_VALID = 11 + MTRR_TYPE_WB = 0x06 + MTRR_TYPE_WP = 0x05 + MTRR_TYPE_WT = 0x04 + MTRR_TYPE_UC = 0x00 +AMD_MTRR_VARIABLE_MASK7 = 0x020F +AMD_MTRR_FIX64k_00000 = 0x0250 +AMD_MTRR_FIX16k_80000 = 0x0258 +AMD_MTRR_FIX16k_A0000 = 0x0259 +AMD_MTRR_FIX4k_C0000 = 0x0268 +AMD_MTRR_FIX4k_C8000 = 0x0269 +AMD_MTRR_FIX4k_D0000 = 0x026A +AMD_MTRR_FIX4k_D8000 = 0x026B +AMD_MTRR_FIX4k_E0000 = 0x026C +AMD_MTRR_FIX4k_E8000 = 0x026D +AMD_MTRR_FIX4k_F0000 = 0x026E +AMD_MTRR_FIX4k_F8000 = 0x026F + +/* Reproduced from AGESA.h */ +AMD_AP_MTRR_FIX64k_00000 = 0x00000250 +AMD_AP_MTRR_FIX16k_80000 = 0x00000258 +AMD_AP_MTRR_FIX16k_A0000 = 0x00000259 +AMD_AP_MTRR_FIX4k_C0000 = 0x00000268 +AMD_AP_MTRR_FIX4k_C8000 = 0x00000269 +AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A +AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B +AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C +AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D +AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E +AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F +CPU_LIST_TERMINAL = 0xFFFFFFFF + +AMD_MTRR_DEFTYPE = 0x02FF + WB_DRAM_TYPE = 0x1E /* MemType - memory type */ + MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */ + MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */ + +HWCR = 0x0C0010015 /* Hardware Configuration */ + INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */ + +IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */ + /* uses 16h - 19h */ +TOP_MEM = 0x0C001001A /* Top of Memory */ +TOP_MEM2 = 0x0C001001D /* Top of Memory2 */ + +LS_CFG3 = 0x0C001101C /* Load-Store Configuration 3 */ + DIS_SS_F15CZ = 7 /* Disable Streaming Store functionality*/ + DC_DIS_SPEC_TLB_RLD_F15CZ = 20 /* Disable speculative TLB reloads*/ + DC_DIS_HW_PF_F15CZ = 23 /* Hardware prefetches bit*/ + + +LS_CFG = 0x0C0011020 /* Load-Store Configuration */ + DIS_SS = 28 /* Family 10h,12h,15h:Disable Streng Store functionality */ + DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */ + +IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */ + IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */ + DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */ + DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */ + +DC_CFG = 0x0C0011022 /* Data Cache Configuration */ + DC_DIS_SPEC_TLB_RLD = 4 /* Disable speculative TLB reloads */ + DIS_CLR_WBTOL2_SMC_HIT = 8 /* self modifying code check buffer bit */ + DIS_HW_PF = 13 /* Hardware prefetches bit */ + +CU_CFG = 0x0C0011023 /* Family 15h: Combined Unit Configuration */ + L2_WAY_LOCK_EN = 23 /* L2WayLock - L2 way lock enable */ + L2_FIRST_LOCKED_WAY = 19 /* L2FirstLockedWay - first L2 way lockedh */ + L2_FIRST_LOCKED_WAY_OR_MASK = 0x000780000 + +DE_CFG = 0x0C0011029 /* Decode Configuration */ + CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */ + +BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */ +CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */ + F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */ + IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */ + +CU_CFG3 = 0x0C001102B /* Combined Unit Configuration 3 */ + COMBINE_CR0_CD = 49 /* Combine CR0.CD for both cores of a compute unit */ + +CR0_PE = 0 # Protection Enable +CR0_NW = 29 # Not Write-through +CR0_CD = 30 # Cache Disable +CR0_PG = 31 # Paging Enable + +/* CPUID Functions */ + +CPUID_MODEL = 1 +AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */ +AMD_CPUID_L2Cache = 0X80000006 /* L2/L3 cache info */ +AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */ + APIC_ID_CORE_ID_SIZE = 12 /* ApicIdCoreIdSize bit position */ + +NB_CFG = 0x0C001001F /* Northbridge Configuration Register */ + INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */ + ENABLE_CF8_EXT_CFG = 46 /* EnableCf8ExtCfg - enable CF8 extended configuration cycles */ + +MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */ + CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */ + SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */ + MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */ + MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */ + MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */ + MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */ + +PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */ + PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */ + PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */ + CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */ + CONFIG_EVENT_H = 4 /* Increment count by number of event */ + /* occured in clock cycle */ + EVENT_ENABLE = 22 /* Enable the event */ +PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */ + +FUNC_3 = 3 +MCA_NB_CFG = 0x44 /* MCA NB Configuration */ +CPU_ERR_DIS = 6 /* CPU error response disable */ +PRODUCT_INFO_REG1 = 0x1FC /* Product Information Register 1 */ + +# Local use flags, in upper most byte if ESI +FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized +FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack +FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit +FLAG_CORE_NOT_IDENTIFIED = 27 # Signals that the cores/compute units of the installed processor is not recognized +FLAG_FORCE_32K_STACK = 28 # Signals that to force 32KB stack size for BSP core +CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW)) +MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN)) + +/**************************************************************************** + * + * CPU MACROS - PUBLIC + * + ****************************************************************************/ +.macro _WRMSR + .byte 0x0f, 0x30 +.endm + +.macro _RDMSR + .byte 0x0F, 0x32 +.endm + +.macro AMD_CPUID arg0 + .ifb \arg0 + mov $0x1, %eax + .byte 0x0F, 0x0A2 /* Execute instruction */ + bswap %eax + xchg %ah, %al /* Ext model in al now */ + rol $0x08, %eax /* Ext model in ah, model in al */ + and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */ + .else + mov \arg0, %eax + .byte 0x0F, 0x0A2 + .endif +.endm + +.macro MAKE_EXT_PCI_ADDR Seg, Bus, Dev, Func, Offset + mov $(1 << 31 | (Seg) << 28 | (((Offset) & (0x0F00)) >> 8) << 24 | (Bus) << 16 | (Dev) << 11 | (Func) << 8) | ((Offset) & (0xFC)), %eax +.endm +/**************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK + +// AMD_ENABLE_STACK_FAMILY_HOOK_F10 +// AMD_ENABLE_STACK_FAMILY_HOOK_F12 +// AMD_ENABLE_STACK_FAMILY_HOOK_F14 + AMD_ENABLE_STACK_FAMILY_HOOK_F15 +.endm + +/**************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK + + //AMD_DISABLE_STACK_FAMILY_HOOK_F10 + //AMD_DISABLE_STACK_FAMILY_HOOK_F12 + //AMD_DISABLE_STACK_FAMILY_HOOK_F14 + AMD_DISABLE_STACK_FAMILY_HOOK_F15 + +.endm + +/**************************************************************************** +* +* GET_NODE_ID_CORE_ID Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI[7:0] = Core# (0..N, relative to node) +* SI[15:8]= Node# (0..N) +* SI[23:16]= reserved +* SI[24]= flag: 1=Family Unrecognized +* SI[25]= flag: 1=Interface re-entry call +* SI[26]= flag: 1=Core is primary of compute unit +* SI[31:27]= reserved, =0 +****************************************************************************/ +.macro GET_NODE_ID_CORE_ID + LOCAL node_core_exit + + mov $-1, %si + //GET_NODE_ID_CORE_ID_F10 + //GET_NODE_ID_CORE_ID_F12 + //GET_NODE_ID_CORE_ID_F14 + GET_NODE_ID_CORE_ID_F15 + /* + * Check for unrecognized Family + */ + cmp $-1, %si # Has family (node/core) already been discovered? + jnz node_core_exit # Br if yes + + mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue + + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jc node_core_exit # Br if yes + hlt # Kill APs +node_core_exit: + +.endm + + +/***************************************************************************** +** Family 15h MACROS +*****************************************************************************/ +/***************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +* Outputs: +* none +* +* Family 15h requirements (BKDG #42301 section 2.3.3): +* * Paging must be disabled. +* * MSRC001_0015[INVD_WBINVD]=0 +* * MSRC001_1020[DisSS]=1 +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 +* * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 +* * MSRC001_1022[DisHwPf]=1 +* * No INVD or WBINVD, no exceptions, page faults or interrupts +*****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F15 + LOCAL fam15_enable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x06, %al # Is this family 15h? + jnz fam15_enable_stack_hook_exit # Br if no + + bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set + jc fam15_skipClearingBit4 + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion + _WRMSR + +fam15_skipClearingBit4: + #cz + mov $LS_CFG3, %ecx # MSR:C001_101C + _RDMSR + bts $DIS_SS_F15CZ, %eax # Turn on Streaming store functionality disabled bit + _WRMSR + + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit + _WRMSR + + mov $LS_CFG3, %ecx # MSR:C001_101C + _RDMSR + bts $DC_DIS_SPEC_TLB_RLD_F15CZ, %eax # Turn on Disable speculative DC-TLB reloads bit + bts $DC_DIS_HW_PF_F15CZ, %eax + _WRMSR + # Do CZ enable stack special + + mov $CU_CFG, %ecx #MSR:C001_1023 + _RDMSR + bt $L2_WAY_LOCK_EN, %eax + #.if (!carry?) + jc dofamily15w + bts $L2_WAY_LOCK_EN, %eax + or $L2_FIRST_LOCKED_WAY_OR_MASK, %eax + _WRMSR + #.endif + +dofamily15w: # Do Standard Family 15 work + + mov $CU_CFG3, %ecx # MSR:C001_102B + _RDMSR + btr $(COMBINE_CR0_CD - 32), %edx # Clear CombineCr0Cd bit + _WRMSR + +fam15_enable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# +* Outputs: +* none +* +* Family 15h requirements: +* * INVD or WBINVD +* * MSRC001_0015[INVD_WBINVD]=1 +* * MSRC001_1020[DisSS]=0 +* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 +* * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 +* * MSRC001_1022[DIS_HW_PF]=0 +*****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK_F15 + LOCAL fam15_disable_stack_hook_exit + LOCAL fam15_disable_stack_remote_read_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x06, %al # Is this family 15h? + jnz fam15_disable_stack_hook_exit # Br if no + + mov %ebx, %edi # Save revision info to EDI + AMD_CPUID $AMD_CPUID_APIC + mov %cl, %al # AL = number of cores - 1 + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %bx + shl %cl, %bl # BL = theoretical number of cores on socket + dec %bx # BL = core number on socket mask + mov %bl, %ah # AH = core number on socket mask + mov %edi, %ebx # Restore revision info to EBX + mov %ax, %di # DI[15:8] = core number mask, DI[7:0] = number of cores - 1 + + and $0x0F00FF, %ebx + mov %ebx, %eax + shr $8, %eax + or %ax, %bx # Save Extended Model, Model and Stepping to BX + # [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping (bx=0000000000010100, ok) + + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR # dx=0 ax=fee00800 + mov %bx, %dx # Save Extended Model, Model and Stepping to DX + shl $16, %edx #EDX[31:16] = Extended Model, Model and Stepping + mov %eax ,%ebx # EBX = LAPIC base + xor %ecx ,%ecx # Zero out CU flags + bts $AMD_CU_NEED_TO_WAIT, %ecx # Default to waiting + bts $AMD_CU_SEND_INVD_MSG, %ecx # Default to signaling + mov %cr0, %eax + bt $CR0_PE, %ax # Are we in protected mode? + # .if (!carry?) + jc 1f + bts $AMD_CU_RESTORE_ES, %ecx # Indicate ES restore is required + mov %es, %cx # Save ES segment register to CX + xor %ax, %ax + mov %ax, %es # Set ES to big real mode selector for 4GB access + # .endif + +1: + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_ID_REG, %bl # + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %al, %ah # AH = APIC ID + mov %di, %dx # DH = core mask + and %dh, %ah # AH = core number # ax=111 dx=01000F03 + +//1: jmp 1b + # .if (zero?) + jnz 1f + # Core 0 of a socket + btr $AMD_CU_SEND_INVD_MSG, %ecx # No need to signal after INVD + #.if (dl != 0) + cmp $0, %dl + jz 2f + # This socket has multiple cores + and $0xf000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %edi + mov %edi, %es:(%ebx) # Signal for non core 0s to complete CAR breakdown + jmp 1f + #.else +2: btr $AMD_CU_NEED_TO_WAIT, %ecx # No need to wait on a single core CPU + #.endif + # .endif +1: + + bt $AMD_CU_NEED_TO_WAIT, %ecx #cx = c0000000 + #.if (carry?) + jnc 1f + #.if (ah == dl) + cmp %dl, %ah + jnz 2f + # This is the highest numbered core on this socket -- wait on core 0 + not %dh # Flip the mask to determine local core 0's APID ID + and %dh, %al # AL = target APIC ID # ax=310 + jmp 3f +2: #.else + # All other cores (including core 0) wait on the next highest core. + # In this way, cores will halt in a cascading fashion down to 0. + inc %al + #.endif +3: + shl $APIC20_APICID, %eax + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # Set target APIC ID + + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $CMD_REG_TO_READ_DATA, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam15_disable_stack_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam15_disable_stack_hook_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam15_disable_stack_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + +fam15_disable_stack_remote_read_exit: + rol $8, %ecx # Restore ECX + +1: #.endif +# jmp 1b + bt $AMD_CU_RESTORE_ES, %ecx + #.if (carry?) + jnc 1f + mov %cx, %es +1: + mov %ecx, %edi + shr $16, %edx + //mov %dx, %bx + + #Handshaking complete. Continue tearing down CAR. + +#cz + mov $LS_CFG3, %ecx # MSR:C001_101C + _RDMSR + btr $DIS_SS_F15CZ, %eax # Turn on Streaming store functionality + _WRMSR + + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads + _WRMSR + + mov $LS_CFG3, %ecx # MSR:C001_101C + _RDMSR + btr $DC_DIS_SPEC_TLB_RLD_F15CZ, %eax # Turn on speculative TLB reloads + btr $DC_DIS_HW_PF_F15CZ, %eax # Turn on hardware prefetches + _WRMSR + +#not cz +// mov $LS_CFG, %ecx # MSR:C001_1020 +// #.if (bx != 0) ; Is this OR A0? +// cmp $0x0, %bx +// jz 0f +// _RDMSR +// btr $DIS_SS, %eax # Turn on Streaming store functionality +// _WRMSR +// #.endif +//0: # End workaround for errata 495 and 496 +// +// inc %ecx #IC_CFG # MSR:C001_1021 +// _RDMSR +// btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads +// _WRMSR +// +// inc %ecx #DC_CFG # MSR:C001_1022 +// _RDMSR +// btr $DC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads +// #.if (bx != 0) # Is this rev A0? +// cmp $0, %bx +// jz 0f +// btr $DIS_HW_PF, %eax # Turn on hardware prefetches +// #.endif # End workaround for erratum 498 +// 0: +// _WRMSR +# end of not cz + #-------------------------------------------------------------------------- + # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. + #-------------------------------------------------------------------------- + + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR + wbinvd #bao # Clear the cache tag RAMs +# #.if (bh == 01h) || (bh == 03h) ; Is this TN or KM? +# cmp $01, %bh +# jz 4f +# cmp $03, %bh +# jnz 1f +#4: + mov $CU_CFG, %ecx # MSR:C001_1023 + _RDMSR + shr $L2_FIRST_LOCKED_WAY, %eax + and $0x1F, %eax + #.if (eax == 01Fh) + cmp $0x1F, %eax #Check if way 15 of the L2 needs to be reserved + jnz 3f + _RDMSR + btr $L2_WAY_LOCK_EN, %eax + _WRMSR +3: #.endif + +1: #.endif + #Do Standard Family 15 work + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD + _WRMSR + #.endif # end + 0: +// +// #-------------------------------------------------------------------------- +// # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. +// #-------------------------------------------------------------------------- +// + mov $CU_CFG3, %ecx # MSR:C001_102B + _RDMSR + bts $(COMBINE_CR0_CD - 32), %edx # Set CombineCr0Cd bit + _WRMSR + + bt $AMD_CU_SEND_INVD_MSG, %edi + #.if (carry?) + jnc 1f + # Non core zero needs to signal to core 0 to proceed + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx # EBX = LAPIC base + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %eax + mov %eax, %es:(%ebx) # Signal for core 0 to complete CAR breakdown + +1: #.endif + +fam15_disable_stack_hook_exit: +.endm + +/***************************************************************************** +* +* GET_NODE_ID_CORE_ID_F15 Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) +*****************************************************************************/ +.macro GET_NODE_ID_CORE_ID_F15 + + LOCAL node_core_f15_exit + LOCAL node_core_f15_AP + LOCAL node_core_f15_shared + +#define F15_L2Size 512 +#define F15_ShareCores 2 +#define F15_AllocMem 0 +#define F15_AllocExe 0 +#define F15_SzAddrBus 48 +#define F15_pad 0 + cmp $-1, %si # Has node/core already been discovered? + jnz node_core_f15_exit # Br if yes + + AMD_CPUID $CPUID_MODEL + shr $12, %eax # AL = cpu extended family + cmp $06, %ah # Is this family 15h? + jnz node_core_f15_exit # Br if no + shr $4, %al # AL = cpu extended model + shr $16, %ebx # BH = LocalApicId + mov %al, %bl # BL = cpu extended model + + # LoadTableAddress(FAM15H_INFO_STRUCT) + # movd mm5, eax # load pointer to Family Info Struc + + xor %esi, %esi # Assume BSC, clear local flags + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jnc node_core_f15_AP # Br if no + + # This is the BSP. + # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) + mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 + out %eax, %dx + jmp node_core_f15_shared # + +node_core_f15_AP: +//1: jmp 1b # not crash + mov %bl, %al # AL = cpu extended model + shr $8, %bx # BL = CPUID Fn0000_0001_EBX[LocalApicId] +// cmp $1, %al # Is This TN? +// jz 4f +// cmp $3, %al +// jnz node_core_f15_AP_not_TN + mov %bx, %si + jmp node_core_f15_shared + # + # This is an AP. Routing tables have been enabled by the HT Init process. + # Also, the MailBox register was set by the BSP during early init + # The Mailbox register content is formatted as follows: + # UINT32 Node:4; // The node id of Core's node. + # UINT32 Socket:4; // The socket of this Core's node. + # UINT32 Module:2; // The internal module number for Core's node. + # UINT32 ModuleType:2; // Single Module = 0, Multi-module = 1. + # UINT32 :20; // Reserved + # +#node_core_f15_AP_not_TN: +# mov $0x0C0000408, %ecx # Read the family 15h mailbox +# _RDMSR # MC4_MISC1[63:32] +# mov %dx, %si # SI = raw mailbox contents (will extract node# from this) +# shr $24, %ebx # BL = CPUID Fn0000_0001_EBX[LocalApicId] +# mov %bx, %di # DI = Initial APIC ID (will extract core# from this) +# +# AMD_CPUID $AMD_CPUID_APIC # +# shr $4, %ch # CH = ApicIdSize, #bits in APIC ID that show core# +# inc %cl # CL = Number of enabled cores in the socket +# mov %cx, %bx +# +# mov $NB_CFG, %ecx +# _RDMSR # EDX has InitApicIdCpuIdLo bit +# +# mov %bh, %cl # CL = APIC ID size +# mov $1, %al # Convert APIC ID size to an AND mask +# shl %cl, %al # AL = 2^APIC ID size +# dec %al # AL = mask for relative core number +# xor %ah, %ah # AX = mask for relative core number +# bt $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1? +# #.if (!carry?) # Br if yes +# jc 0f +# mov $8, %ch # Calculate core number shift count +# sub %cl, %ch # CH = core shift count +# mov %ch, %cl +# shr %cl, %di # Right justify core number +# #.endif +# 0: +# and %ax, %di # DI = socket-relative core number +# +# mov %si, %cx # CX = raw mailbox value +# shr $10, %cx # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM) +# and $3, %cl # Isolate ModuleType +# xor %bh, %bh # BX = Number of enabled cores in the socket +# shr %cl, %bx # BX = Number of enabled cores per node +# xor %dx, %dx # Clear upper word for div +# mov %di, %ax # AX = socket-relative core number +# div %bx # DX = node-relative core number +# movzx %si, %eax # Prepare return value +# and $0x000F, %ax # AX = node number +# shl $8,%ax # [15:8]=node# +# mov %dl, %al # [7:0]=core# (relative to node) +# mov %eax, %esi # ESI = node-relative core number +# + # + # determine if this core shares MTRRs + # +node_core_f15_shared: + mov $0x8000C580, %eax # Compute Unit Status + mov %si, %bx + shl $3, %bh # Move node# to PCI Dev# field + add %bh, %ah # Adjust for node number + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore + + # BL is MyCore# + mov $0x08, %cx # Use CH as 'first of pair' core# + #.while (cl > 0) + jmp 0f + 8: + bt $0, %eax # Is pair enabled? + #.if (carry?) # + jnc 1f + mov $0x01, %bh # flag core as primary + bt $16, %eax # Is there a 2nd in the pair? + #.if (carry?) # + jnc 4f + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + inc %ch + xor %bh, %bh # flag core as NOT primary + #.break .if (ch == bl) # Does 2nd match MyCore#? + cmp %bl, %ch + je 9f + jmp 2f + #.else # No 2nd core + 4: + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + #.endif + 2: + inc %ch + #.endif + 1: + shr $1, %eax + dec %cl + #.endw + 0: + #.if (cl == 0) + cmp $0x0, %cl + ja 8b + 9: + or %cl, %cl + jne 1f + #Error - core# didn't match Compute Unit Status content + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns + #.endif + 1: + #.if (bh != 0) # Check state of primary for the matched core + or %bh, %bh + je 2f + bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value + #.endif + 2: + +node_core_f15_exit: + +.endm + +/***************************************************************************** +* AMD_ENABLE_STACK: Setup a stack +* +* In: +* EBX = Return address (preserved) +* +* Out: +* SS:ESP - Our new private stack location +* +* EAX = AGESA_STATUS +* +* ECX = Stack size in bytes +* +* Requirements: +* * This routine presently is limited to a max of 64 processor cores +* Preserved: +* ebx ebp +* Destroyed: +* eax, ecx, edx, edi, esi, ds, es, ss, esp +* mmx0, mmx1 +* +* Description: +* Fixed MTRR address allocation to cores: +* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. +* There is a max of 1 BSP, 7 core0s and 56 other cores. +* Although each core has it's own cache storage, they share the address space. Each core must +* be assigned a private and unique address space for its stack. To support legacy systems, +* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved +* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) +* +* 80000h 40000h 00000h +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* 64K | | | | | | | | | 64K ea +* ea +----------+----------+----------+----------+----------+----------+----------+----------+ +* | MTRR 0000_0250 MTRRfix64K_00000 | +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node +* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* +* C0000h B0000h A0000h 90000h 80000h +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +*16K | | | | | | | | | | | | | | | | | +* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node +* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* +* E0000h D0000h C0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* +* 100000h F0000h E0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +*****************************************************************************/ +.macro AMD_ENABLE_STACK + +# These are local labels. Declared so linker doesn't cause 'redefined label' errors + LOCAL SetupStack + LOCAL Real16bMode + LOCAL Protected32Mode + LOCAL ClearTheStack + +# Note that SS:ESP will be default stack. Note that this stack +# routine will not be used after memory has been initialized. Because +# of its limited lifetime, it will not conflict with typical PCI devices. + movd %ebx, %mm0 # Put return address in a safe place + movd %ebp, %mm1 # Save some other user registers + + # get node id and core id of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node) + # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established + + # determine if stack is already enabled. We are using the DefType MSR for this determination. + # It is =0 after reset; CAR setup sets it to enable the MTRRs + mov %cr0, %eax + test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits) + jnz SetupStack # Jump if yes + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR + test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) + jz SetupStack # Jump if no + or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized + +SetupStack: + # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM + mov %esi, %ebx # Get my Node/Core info + xor %bl, %bl + shl $3, %bh # Isolate my node#, match alignment for PCI Dev# + mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit + add %bh, %ah + mov %eax, %ebx # Save PCI address for Base/Limit pair + + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) + out %eax, %dx # DRAM Limit = node0, no interleave + + mov %ebx, %eax + sub $4, %eax # Now point to the Base register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + mov $0x00000003, %eax # Set the read and write enable bits + out %eax, %dx # DRAM Base = 0x0000, R/W + + AMD_ENABLE_STACK_FAMILY_HOOK + + # Init CPU MSRs for our init routines + mov $MTRR_SYS_CFG, %ecx # SYS_CFG + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit + _WRMSR + + mov %esi, %eax + bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry? + #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP + jc 0f + bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit? + #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset + # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores + # Clear all variable and Fixed MTRRs for non-shared cores + jnc 0f + mov $AMD_MTRR_VARIABLE_BASE0, %ecx + xor %eax, %eax + xor %edx, %edx + #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n] + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x10, %cl + jne 2b + mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250 + _WRMSR + mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258 + _WRMSR + mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259 + _WRMSR + mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 + #.while (cl != 70h) + jmp 3f + 4: + _WRMSR + inc %cl + #.endw + 3: + cmp $0x70, %cl + jne 4b + # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. + # - not strictly needed since the FixedMTRRs take presedence. + mov $(16 * 1024 * 1024), %eax + mov $TOP_MEM, %ecx # MSR:C001_001A + _WRMSR + #.endif # End Is_Primary + #.endif # End Stack_ReEntry + 0: + # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores + xor %eax, %eax + xor %edx, %edx + mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019 + #.while (cl != 1Ah) + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x1A, %cl + jne 2b + mov $TOP_MEM2, %ecx # MSR:C001_001D + _WRMSR + + # setup MTTRs for stacks + # A speculative read can be generated by a speculative fetch mis-aligned in a code zone + # or due to a data zone being interpreted as code. When a speculative read occurs outside a + # controlled region (intentionally used by software), it could cause an unwanted cache eviction. + # To prevent speculative reads from causing an eviction, the unused cache ranges are set + # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. + # Note: some core stack regions will share an MTRR since the control granularity is much + # larger than the allocated stack zone. The allocation algorithm must account for this 'extra' + # space covered by the MTRR when parseling out cache space for the various uses. In some cases + # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c + # + # Outcome of this block is that: (Note the MTRR map at the top of the file) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) + # + + mov %esi, %eax # Load Flags,node, core + #.if (al == 0) # Is a core 0? + or %al, %al + jne 1f + #.if (ah == 0) # Is Node 0? (BSP) + or %ah, %ah + jne 2f + # Is BSP, assign a 64K stack + mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE >> 12)), %ebx + bt $FLAG_FORCE_32K_STACK, %eax + jnc w64k_here # Br if no + mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE_32K >> 12)), %ebx +w64k_here: + mov $BSP_STACK_BASE_ADDR, %ebp + jmp 0f + #.else # node 1 to 7, core0 + 2: + # Is a Core0 of secondary node, assign 16K stacks + mov $AMD_MTRR_FIX16k_80000, %bx + shl $16, %ebx # + dec %ah #index from 0 + mov %ah, %bh # Node# is used as slot# + mov $(CORE0_STACK_SIZE >> 12), %bl + mov %ah, %al # Base = (Node# * Size)# + mul %bl # + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE0_STACK_BASE_ADDR, %eax + mov %eax, %ebp + #.endif + jmp 0f + #.else #core 1 thru core 7 + 1: + # Is core 1-7 of any node, assign 4K stacks + mov $8, %al # CoreIndex = ( (Node# * 8) ... + mul %ah # + mov %si, %bx # + add %bl, %al # ... + Core#)# + + mov $AMD_MTRR_FIX64k_00000, %bx + shl $16, %ebx # + mov %al, %bh # Slot# = (CoreIndex / 16) + 4# + shr $4, %bh # + add $4, %bh # + mov $(CORE1_STACK_SIZE >> 12), %bl + + mul %bl # Base = ( (CoreIndex * Size) ... + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)# + mov %eax, %ebp + #.endif + 0: + + # Now set the MTRR. Add this to already existing settings (don't clear any MTRR) + mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot + mov %bh, %cl # ShiftCount = ((slot# ... + and $0x03, %cl # ... % 4) ... + shl $0x03, %cl # ... * 8)# + shl %cl, %edi # Cache type is now in correct position + ror $16, %ebx # Get the MTRR address + movzx %bx, %ecx # + rol $16, %ebx # Put slot# & size back in BX + _RDMSR # Read-modify-write the MSR + #.if (bh < 4) # Is value in lower or upper half of MSR? + cmp $4, %bh + jae 1f + or %edi, %eax # + jmp 0f + #.else + 1: # + or %edi, %edx # + #.endif # + 0: + _WRMSR # + + # Enable MTRR defaults as UC type + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR # Read-modify-write the MSR + bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn + bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn + _WRMSR + + # Close the modification window on the Fixed MTRRs + mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn + bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit + _WRMSR + + # Enable caching in CR0 + mov %cr0, %eax # Enable WT/WB cache + btr $CR0_PG, %eax # Make sure paging is disabled + btr $CR0_CD, %eax # Clear CR0 NW and CD + btr $CR0_NW, %eax + mov %eax, %cr0 + + # Use the Stack Base & size to calculate SS and ESP values + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # + mov %ebp, %esp # Initialize the stack pointer + mov %esp, %edi # Copy the stack start to edi + movzx %bl, %bx + movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore + shl $12, %ebx # Make size full byte count (* 4K) + add %ebx, %esp # Set the Stack Pointer as full linear address + sub $4, %esp + # + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - 32b start address of stack block + # ebx - size of stack block + # esp - 32b linear stack pointer + # + + # Determine mode for SS base; + mov %cr0, %ecx # Check for 32-bit protect mode + bt $CR0_PE, %ecx # + #.if (!carry?) # PE=0 means real mode + jc Protected32Mode + mov %cs, %cx # PE=1 + cmp $0x0D000, %cx # Check for CS + jb Protected32Mode # If CS < D000, it is a selector instead of a segment + # alter SS:ESP for 16b Real Mode: +Real16bMode: + mov %edi, %eax + shr $4, %eax # Create a Real Mode segment for ss, ds, es + mov %ax, %ss + mov %ax, %ds + mov %ax, %es + shl $4, %eax + sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode + mov %ebx, %esp # Make SP an offset from SS + sub $4, %esp # + # .endif # endif + # #else + # Default is to use Protected 32b Mode + #.endif + ; +Protected32Mode: + # + # Clear The Stack + # Now that we have set the location and the MTRRs, initialize the cache by + # reading then writing to zero all of the stack area. + # review: + # ss - Stack base + # esp - stack pointer + # ebx - size of stack block + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - address of start of stack block + # + +ClearTheStack: # Stack base is in SS, stack pointer is in ESP + shr $2, %ebx # ebx = stack block size in dwords + mov %bx, %cx # + # Check our flags - Don't clear an existing stack + #.if ( !(esi & 0FF000000h)) # Check our flags + test $(1 << FLAG_STACK_REENTRY), %esi + jne 1f + cld + mov %edi, %esi + rep lodsl (%esi) # Pre-load the range + xor %eax, %eax + mov %bx, %cx + mov %edi, %esi # Preserve base for push on stack + rep stosl (%edi) # Clear the range + movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword + shl $2, %ebx # Put stack size and base + push %ebx # in top of stack + push %esi + + mov %ebx, %ecx # Return size of stack in bytes + xor %eax, %eax # eax = 0 : no error return code + jmp 0f + #.else + 1: + movzx %cx, %ecx + shl $2, %ecx # Return size of stack in bytes + mov %esi, %eax + shr $24, %eax # Keep the flags as part of the error report + or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up) + #.endif + 0: + + movd %mm0, %ebx # Restore return address + movd %mm1, %ebp +.endm + +/***************************************************************************** +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP +* +* In: +* none +* +* Out: +* EAX = AGESA_SUCCESS +* +* Preserved: +* ebx +* Destroyed: +* eax, ecx, edx, esp +*****************************************************************************/ +.macro AMD_DISABLE_STACK + + mov %ebx, %esp # Save return address + + # get node/core/flags of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) +#1: jmp 1b + # Turn on modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications + _WRMSR + + # Set lower 640K MTRRs for Write-Back memory caching + mov $AMD_MTRR_FIX64k_00000, %ecx + mov $0x1E1E1E1E, %eax + mov %eax, %edx + _WRMSR # 0 - 512K = WB Mem + mov $AMD_MTRR_FIX16k_80000, %ecx + _WRMSR # 512K - 640K = WB Mem + + # Turn off modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification + _WRMSR + + AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations + + mov %esp, %ebx + xor %eax, %eax + +.endm + diff --git a/src/vendorcode/amd/pi/00730F01/AGESA.h b/src/vendorcode/amd/pi/00730F01/AGESA.h new file mode 100644 index 0000000000..8132c615fb --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/AGESA.h @@ -0,0 +1,3657 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AGESA_H_ +#define _AGESA_H_ + +#include "Porting.h" +#include "AMD.h" + +// +// +// AGESA Types and Definitions +// +// + +// AGESA BASIC CALLOUTS +#define AGESA_MEM_RELEASE 0x00028000ul + +// AGESA ADVANCED CALLOUTS, Processor +#define AGESA_CHECK_UMA 0x00028100ul +#define AGESA_DO_RESET 0x00028101ul +#define AGESA_ALLOCATE_BUFFER 0x00028102ul +#define AGESA_DEALLOCATE_BUFFER 0x00028103ul +#define AGESA_LOCATE_BUFFER 0x00028104ul +#define AGESA_RUNFUNC_ONAP 0x00028105ul +#define AGESA_PUBLISH_CS_RESTORATION_DATA 0x00028106ul + +// AGESA ADVANCED CALLOUTS, Memory +#define AGESA_READ_SPD 0x00028140ul +#define AGESA_HOOKBEFORE_DRAM_INIT 0x00028141ul +#define AGESA_HOOKBEFORE_DQS_TRAINING 0x00028142ul +#define AGESA_READ_SPD_RECOVERY 0x00028143ul +#define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144ul +#define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY 0x00028145ul +#define AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE 0x00028146ul +#define AGESA_EXTERNAL_VOLTAGE_ADJUST 0x00028147ul + +// AGESA IDS CALLOUTS +#define AGESA_GET_IDS_INIT_DATA 0x00028200ul + +// AGESA GNB CALLOUTS +#define AGESA_GNB_PCIE_SLOT_RESET 0x00028301ul +#define AGESA_GNB_GFX_GET_VBIOS_IMAGE 0x00028302ul +#define AGESA_GNB_PCIE_CLK_REQ 0x00028303ul + +// AGESA FCH CALLOUTS +#define AGESA_FCH_OEM_CALLOUT 0x00028401ul + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +// +//----------------------------------------------------------------------------- + +/// Configuration values for SdConfig +typedef enum { + SdDisable = 0, ///< Disabled + SdAmda, ///< AMDA, set 24,18,16, default + SdDma, ///< DMA clear 24, 16, set 18 + SdPio, ///< PIO clear 24,18,16 + SdDump ///< SD DUMP, don't touch SD +} SD_MODE; + +/// Configuration values for SdClockControl +typedef enum { + Sd50MhzTraceCableLengthWithinSixInches = 4, ///< 50Mhz, default + Sd40MhzTraceCableLengthSix2ElevenInches = 6, ///< 40Mhz + Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7, ///< 25Mhz +} SD_CLOCK_CONTROL; + +/// Configuration values for AzaliaController +typedef enum { + AzAuto = 0, ///< Auto - Detect Azalia controller automatically + AzDisable, ///< Diable - Disable Azalia controller + AzEnable ///< Enable - Enable Azalia controller +} HDA_CONFIG; + +/// Configuration values for IrConfig +typedef enum { + IrDisable = 0, ///< Disable + IrRxTx0 = 1, ///< Rx and Tx0 + IrRxTx1 = 2, ///< Rx and Tx1 + IrRxTx0Tx1 = 3 ///< Rx and both Tx0,Tx1 +} IR_CONFIG; + +/// Configuration values for SataClass +typedef enum { + SataNativeIde = 0, ///< Native IDE mode + SataRaid, ///< RAID mode + SataAhci, ///< AHCI mode + SataLegacyIde, ///< Legacy IDE mode + SataIde2Ahci, ///< IDE->AHCI mode + SataAhci7804, ///< AHCI mode as 7804 ID (AMD driver) + SataIde2Ahci7804 ///< IDE->AHCI mode as 7804 ID (AMD driver) +} SATA_CLASS; + +/// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG +typedef enum { + PortA4 = 0, ///< 4:0:0:0 + PortA2B2 = 2, ///< 2:2:0:0 + PortA2B1C1 = 3, ///< 2:1:1:0 + PortA1B1C1D1 = 4 ///< 1:1:1:1 +} GPP_LINKMODE; + +/// Configuration values for FchPowerFail +typedef enum { + AlwaysOff = 0, ///< Always power off after power resumes + AlwaysOn = 1, ///< Always power on after power resumes + UsePrevious = 3, ///< Resume to same setting when power fails +} POWER_FAIL; + + +/// Configuration values for SATA Link Speed +typedef enum { + Gen1 = 1, ///< SATA port GEN1 speed + Gen2 = 2, ///< SATA port GEN2 speed + Gen3 = 3, ///< SATA port GEN3 speed +} SATA_SPEED; + + +/// Configuration values for GPIO function +typedef enum { + Function0 = 0, ///< GPIO Function 1 + Function1 = 1, ///< GPIO Function 1 + Function2 = 2, ///< GPIO Function 2 + Function3 = 3, ///< GPIO Function 3 +} GPIO_FUN; + +/// Configuration values for memory phy voltage (VDDR) +typedef enum { + VOLT0_95, ///< VDDR 0.95V + VOLT1_05, ///< VDDR 1.05V + MAX_VDDR ///< Maxmum value for this enum definition +} MEMORY_PHY_VOLTAGE; + +/// Configuration values for GPIO_CFG +typedef enum { + OwnedByEc = 1 << 0, ///< This bit can only be written by EC + OwnedByHost = 1 << 1, ///< This bit can only be written by host (BIOS) + Sticky = 1 << 2, ///< If set, [6:3] are sticky + PullUpB = 1 << 3, ///< 0: Pullup enable; 1: Pullup disabled + PullDown = 1 << 4, ///< 0: Pulldown disabled; 1: Pulldown enable + GpioOutEnB = 1 << 5, ///< 0: Output enable; 1: Output disable + GpioOut = 1 << 6, ///< Output state when GpioOutEnB is 0 + GpioIn = 1 << 7, ///< This bit is read only - current pin state +} CFG_BYTE; + +/// Configuration values for GPIO_CFG2 +typedef enum { + DrvStrengthSel_4mA = 0 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_8mA = 1 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_12mA = 2 << 1, ///< 18:17 DrvStrengthSel. + DrvStrengthSel_16mA = 3 << 1, ///< 18:17 DrvStrengthSel. + PullUpSel_8K = 1 << 3, ///< 19 PullUpSel. Read-write. 0=4 K pull-up is selected. 1=8 K pull-up is selected. + PullUpEnable = 1 << 4, ///< 20 PullUpEnable. Read-write. 0=Pull-up is disabled on the pin. 1=Pull-up is enabled on the pin. + PullDownEnable = 1 << 5, ///< 21 PullDownEnable. Read-write. 0=Pull-down is disabled on the pin. 1=Pull-down is enabled on thepin. + OutputValue = 1 << 6, ///< 22 OutputValue. Read-write. 0=low. 1=high. + OutputEnable = 1 << 7, ///< 23 OutputEnable. Read-write. 0=Output is disabled on the pin. 1=Output is enabled on the pin. +} CFG2_BYTE; + +/// FCH GPIO CONTROL +typedef struct { + IN UINT8 GpioPin; ///< Gpio Pin, valid range: 0-67, 128-150, 160-228 + IN GPIO_FUN PinFunction; ///< Multi-function selection + IN CFG_BYTE CfgByte; ///< GPIO Register value +} GPIO_CONTROL; + +/// +/// FCH SCI MAP CONTROL +/// +typedef struct { + IN UINT8 InputPin; ///< Input Pin, valid range 0-63 + IN UINT8 GpeMap; ///< Gpe Map, valid range 0-31 +} SCI_MAP_CONTROL; + +/// +/// FCH SATA PHY CONTROL +/// +typedef struct { + IN BOOLEAN CommonPhy; ///< Common PHY or not + ///< @li <b>FALSE</b> - Only applied to specified port + ///< @li <b>TRUE</b> - Apply to all SATA ports + IN SATA_SPEED Gen; ///< SATA speed + IN UINT8 Port; ///< Port number, valid range: 0-7 + IN UINT32 PhyData; ///< SATA PHY data, valid range: 0-0xFFFFFFFF +} SATA_PHY_CONTROL; + +/// +/// FCH Component Data Structure in InitReset stage +/// +typedef struct { + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN BOOLEAN Xhci0Enable; ///< XHCI0 controller function + ///< @li <b>FALSE</b> - XHCI0 controller disabled + ///< @li <b>TRUE</b> - XHCI0 controller enabled + + IN BOOLEAN Xhci1Enable; ///< XHCI1 controller function + ///< @li <b>FALSE</b> - XHCI1 controller disabled + ///< @li <b>TRUE</b> - XHCI1 controller enabled +} FCH_RESET_INTERFACE; + + +/// +/// FCH Component Data Structure from InitEnv stage +/// +typedef struct { + IN SD_MODE SdConfig; ///< Secure Digital (SD) controller mode + IN HDA_CONFIG AzaliaController; ///< Azalia HD Audio Controller + + IN IR_CONFIG IrConfig; ///< Infrared (IR) Configuration + IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI + ///< @li <b>FALSE</b> - Disable Gen2 + ///< @li <b>TRUE</b> - Enable Gen2 + + IN SATA_CLASS SataClass; ///< SATA controller mode + IN BOOLEAN SataEnable; ///< SATA controller function + ///< @li <b>FALSE</b> - SATA controller is disabled + ///< @li <b>TRUE</b> - SATA controller is enabled + + IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled + ///< @li <b>FALSE</b> - IDE controller is disabled + ///< @li <b>TRUE</b> - IDE controller is enabled + + IN BOOLEAN SataIdeMode; ///< Native mode of SATA IDE controller + ///< @li <b>FALSE</b> - Legacy IDE mode + ///< @li <b>TRUE</b> - Native IDE mode + + IN BOOLEAN Ohci1Enable; ///< OHCI controller #1 Function + ///< @li <b>FALSE</b> - OHCI1 is disabled + ///< @li <b>TRUE</b> - OHCI1 is enabled + + IN BOOLEAN Ohci2Enable; ///< OHCI controller #2 Function + ///< @li <b>FALSE</b> - OHCI2 is disabled + ///< @li <b>TRUE</b> - OHCI2 is enabled + + IN BOOLEAN Ohci3Enable; ///< OHCI controller #3 Function + ///< @li <b>FALSE</b> - OHCI3 is disabled + ///< @li <b>TRUE</b> - OHCI3 is enabled + + IN BOOLEAN Ohci4Enable; ///< OHCI controller #4 Function + ///< @li <b>FALSE</b> - OHCI4 is disabled + ///< @li <b>TRUE</b> - OHCI4 is enabled + + IN BOOLEAN GppEnable; ///< Master switch of GPP function + ///< @li <b>FALSE</b> - GPP disabled + ///< @li <b>TRUE</b> - GPP enabled + + IN POWER_FAIL FchPowerFail; ///< FCH power failure option +} FCH_INTERFACE; + + +/*---------------------------------------------------------------------------- + * CPU Feature related info + *---------------------------------------------------------------------------- + */ +/// Build Configuration values for BLDCFG_PLATFORM_CONNECTED_STANDBY_MODE +typedef enum { + ConnectedStandbyAuto = 0, ///< Auto + ConnectedStandbyDisabled = 1, ///< Disabled + MaxConnectedStandbyMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CONNECTED_STANDBY_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE +typedef enum { + CStateModeDisabled = 0, ///< Disabled + CStateModeC6 = 1, ///< C6 State + MaxCStateMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CSTATE_MODES; + +/// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE +typedef enum { + CpbModeAuto = 0, ///< Auto + CpbModeDisabled = 1, ///< Disabled + MaxCpbMode = 2 ///< Not a valid value, used for verifying input +} PLATFORM_CPB_MODES; + +/// Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE +typedef enum { + LOW_POWER_PSTATE_FOR_PROCHOT_AUTO = 0, ///< Auto + LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE = 1, ///< Disabled + MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE = 2 ///< Not a valid value, used for verifying input +} PLATFORM_LOW_POWER_PSTATE_MODES; + +/// Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY +#define PsdPolicyProcessorDefault 0 ///< PSD is dependent or independent per processor default +#define PsdPolicyDependent 1 ///< PSD is forced dependent +#define PsdPolicyIndependent 2 ///< PSD is forced independent +#define PsdPolicyMax 3 ///< Not a valid value, used for verifying input + +/*---------------------------------------------------------------------------- + * GNB PCIe configuration info + *---------------------------------------------------------------------------- + */ + +// Event definitions + +#define GNB_EVENT_INVALID_CONFIGURATION 0x20010000ul // User configuration invalid +#define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001ul // Requested lane allocation for PCIe port can not be supported +#define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION 0x20010002ul // Requested incorrect PCIe port device address +#define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION 0x20010003ul // Incorrect parameter in DDI link configuration +#define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION 0x20010004ul // Invalid with for PCIe port or DDI link +#define GNB_EVENT_INVALID_LANES_CONFIGURATION 0x20010005ul // Lane double subscribe lanes +#define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION 0x20010006ul // Requested lane allocation for DDI link(s) can not be supported +#define GNB_EVENT_LINK_TRAINING_FAIL 0x20020000ul // PCIe Link training fail +#define GNB_EVENT_BROKEN_LANE_RECOVERY 0x20030000ul // Broken lane workaround applied to recover link training +#define GNB_EVENT_GEN2_SUPPORT_RECOVERY 0x20040000ul // Scale back to GEN1 to recover link training + + +#define DESCRIPTOR_TERMINATE_LIST 0x80000000ull +#define DESCRIPTOR_IGNORE 0x40000000ull + +/// PCIe link initialization +typedef enum { + EndpointDetect = 0, ///< Detect endpoint presence + EndpointNotPresent ///< Endpoint not present (or connected). Used in case there is alternative way to determine + ///< if device present on board or in slot. For example GPIO can be used to determine device presence. +} PCIE_ENDPOINT_STATUS; + + +/// PCIe port misc extended controls +typedef struct { + IN UINT8 LinkComplianceMode :1; ///< Force port into compliance mode (device will not be trained, port output compliance pattern) + IN UINT8 LinkSafeMode :2; /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability) + * @li @b 0 - port can advertize muximum supported capability + * @li @b 1 - port limit advertized capability and speed to PCIe Gen1 + */ + IN UINT8 SbLink :1; /**< PCIe link type + * @li @b 0 - General purpose port + * @li @b 1 - Port connected to SB + */ + IN UINT8 ClkPmSupport :1; /**< Clock Power Management Support + * @li @b 0 - Clock Power Management not configured + * @li @b 1 - Clock Power Management configured according to PCIe device capability + */ +} PCIe_PORT_MISC_CONTROL; + +/// The IO APIC Interrupt Mapping Info +typedef struct { + IN UINT8 GroupMap; /**< Group mapping for slot or endpoint device (connected to PCIE port) interrupts . + * @li <b>0</b> - IGNORE THIS STRUCTURE AND USE RECOMMENDED SETTINGS + * @li <b>1</b> - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) + * @li <b>2</b> - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) + * @li ... + * @li <b>8</b> - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) + */ + IN UINT8 Swizzle; /**< Swizzle interrupt in the Group. + * @li <b>0</b> - ABCD + * @li <b>1</b> - BCDA + * @li <b>2</b> - CDAB + * @li <b>3</b> - DABC + */ + IN UINT8 BridgeInt; /**< IOAPIC redirection table entry for PCIE bridge interrupt + * @li <b>0</b> - Entry 0 of IO APIC redirection table + * @li <b>1</b> - Entry 1 of IO APIC redirection table + * @li ... + * @li <b>31</b> - Entry 31 of IO APIC redirection table + */ +} APIC_DEVICE_INFO; + +/// Initial Offset Calibration Control +typedef enum { + ADAPT_IOC_DISABLED = 0, ///< Initial Offset Calibration Disabled + ADAPT_IOC_ENABLED ///< Initial Offset Calibration Enabled +} ADAPT_IOC_CONTROL; + +/// DFE Control values +typedef enum { + ADAPT_DFE_CONTROL_DISABLED = 0, ///< DFE Disabled + ADAPD_DFE_CONTROL_1TAP_DFE = 4, ///< 1-tap DFE + ADAPD_DFE_CONTROL_1TAP_DFE_FBF, ///< 1-tap DFE with Future Bit Filtering + ADAPD_DFE_CONTROL_2TAP_DFE, ///< 2-tap DFE + ADAPD_DFE_CONTROL_2TAP_DFE_FBF ///< 2-tap DFE with Future Bit Filtering +} ADAPT_DFE_CONTROL; + +/// LEQ Control values +typedef enum { + ADAPT_LEQ_CONTROL_DISABLED = 0, ///< LEQ Disabled + ADAPT_LEQ_CONTROL_DC_GAIN = 2, ///< DC Gain Adaptation + ADAPT_LEQ_CONTROL_DC_GAIN_POLE ///< DC Gain and Pole Adaptation +} ADAPT_LEQ_CONTROL; + +/// Dynamic Offset Calibration Control +typedef enum { + ADAPT_DOC_DISABLED = 0, ///< Dynamic Offset Calibration Disabled + ADAPT_DOC_ENABLED ///< Dynamic Offset Calibration Enabled +} ADAPT_DOC_CONTROL; + +/// FOM Calculation Control +typedef enum { + ADAPT_FOMC_DISABLED = 0, ///< FOM Calculation Disabled + ADAPT_FOMC_ENABLED ///< FOM Calculation Enabled +} ADAPT_FOMC_CONTROL; + +/// PI Offset Calibration Control +typedef enum { + ADAPT_PIOC_DISABLED = 0, ///< PI Offset Calibration Disabled + ADAPT_PIOC_ENABLED ///< PI Offset Calibration Enabled +} ADAPT_PIOC_CONTROL; + +/// GEN3 RxAdaptMode Configuration Structure +typedef struct { + IN BOOLEAN InitOffsetCancellation; ///< Initial Offset Cancellation Enable + IN UINT8 DFEControl; ///< DFE Control + IN UINT8 LEQControl; ///< LEQ Control + IN BOOLEAN DynamicOffsetCalibration; ///< Dynamic Offset Calibration Enable + IN BOOLEAN FOMCalculation; ///< FOM Calculation Enable + IN BOOLEAN PIOffsetCalibration; ///< PI Offset Calibratino Enable +} RX_ADAPT_MODE; + +/// PCIe port configuration data +typedef struct { + IN UINT8 PortPresent; ///< Enable PCIe port for initialization. + IN UINT8 ChannelType; /**< Channel type. + * @li @b 0 - "lowLoss", + * @li @b 1 - "highLoss", + * @li @b 2 - "mob0db", + * @li @b 3 - "mob3db", + * @li @b 4 - "extnd6db" + * @li @b 5 - "extnd8db" + */ + IN UINT8 DeviceNumber; /**< PCI Device number for port. + * @li @b 0 - Native port device number + * @li @b N - Port device number (See available configurations in BKDG + */ + IN UINT8 FunctionNumber; ///< Reserved for future use + IN UINT8 LinkSpeedCapability; /**< PCIe link speed/ + * @li @b 0 - Maximum supported by silicon + * @li @b 1 - Gen1 + * @li @b 2 - Gen2 + * @li @b 3 - Gen3 + */ + IN UINT8 LinkAspm; /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM) + * @li @b 0 - Disabled + * @li @b 1 - L0s only + * @li @b 2 - L1 only + * @li @b 3 - L0s and L1 + */ + IN UINT8 LinkHotplug; /**< Hotplug control. + * @li @b 0 - Disabled + * @li @b 1 - Basic + * @li @b 2 - Server + * @li @b 3 - Enhanced + */ + IN UINT8 ResetId; /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO + * identification which control reset for given port. + * Each port with unique GPIO should have unique ResetId assigned. + * All ports use same GPIO to control reset should have same ResetId assigned. + * see AgesaPcieSlotResetContol. + */ + IN PCIe_PORT_MISC_CONTROL MiscControls; ///< Misc extended controls + IN APIC_DEVICE_INFO ApicDeviceInfo; ///< IOAPIC device programming info + IN PCIE_ENDPOINT_STATUS EndpointStatus; ///< PCIe endpoint (device connected to PCIe port) status + IN RX_ADAPT_MODE RxAdaptMode; ///< Gen3 RxAdaptMode configuration +} PCIe_PORT_DATA; + +/// DDI channel lane mapping +typedef struct { ///< Structure that discribe lane mapping + IN UINT8 Lane0 :2; /**< Lane 0 mapping + * @li @b 0 - Map to lane 0 + * @li @b 1 - Map to lane 1 + * @li @b 2 - Map to lane 2 + * @li @b 3 - Map to lane 3 + */ + IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") + IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") + IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") +} CHANNEL_MAPPING; ///< Lane mapping + +/// Common Channel Mapping +typedef union { + IN UINT8 ChannelMappingValue; ///< Raw lane mapping + IN CHANNEL_MAPPING ChannelMapping; ///< Channel mapping +} CONN_CHANNEL_MAPPING; + +/// DDI Configuration data +typedef struct { + IN UINT8 ConnectorType; /**< Display Connector Type + * @li @b 0 - DP + * @li @b 1 - eDP + * @li @b 2 - Single Link DVI-D + * @li @b 3 - Dual Link DVI-D (see @ref DualLinkDviDescription "Example Dual Link DVI connector description") + * @li @b 4 - HDMI + * @li @b 5 - DP-to-VGA + * @li @b 6 - DP-to-LVDS + * @li @b 7 - Hudson-2 NutMeg DP-to-VGA + * @li @b 8 - Single Link DVI-I + * @li @b 9 - Native CRT (Family 0x14) + * @li @b 10 - Native LVDS (Family 0x14) + * @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or DP-to-LVDS + * The auto detection method only support panel with EDID. + */ + IN UINT8 AuxIndex; /**< Indicates which AUX or DDC Line is used + * @li @b 0 - AUX1 + * @li @b 1 - AUX2 + * @li @b 2 - AUX3 + * @li @b 3 - AUX4 + * @li @b 4 - AUX5 + * @li @b 5 - AUX6 + */ + IN UINT8 HdpIndex; /**< Indicates which HDP pin is used + * @li @b 0 - HDP1 + * @li @b 1 - HDP2 + * @li @b 2 - HDP3 + * @li @b 3 - HDP4 + * @li @b 4 - HDP5 + * @li @b 5 - HDP6 + */ + IN CONN_CHANNEL_MAPPING Mapping[2]; /**< Set specific mapping of lanes to connector pins + * @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane + * @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link) + * if Mapping[x] set to 0 than default mapping assumed + */ + IN UINT8 LanePnInversionMask; /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port. + * @li 0 - Do not invert (default) + * @li 1 - Invert P and N on this lane + */ + IN UINT8 Flags; /**< Capabilities flags + * @li Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 + * @li Flags bit[7:1] Reserved + */ +} PCIe_DDI_DATA; + +/// Engine Configuration +typedef struct { + IN UINT8 EngineType; /**< Engine type + * @li @b 0 - Ignore engine configuration + * @li @b 1 - PCIe port + * @li @b 2 - DDI + */ + IN UINT16 StartLane; /**< Start Lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + IN UINT16 EndLane; /**< End lane ID (in reversed configuration StartLane > EndLane) + * Refer to lane descriptions and supported configurations in BKDG + */ + +} PCIe_ENGINE_DATA; + +/// PCIe port descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info +} PCIe_PORT_DESCRIPTOR; + +/// DDI descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in complex + */ + IN PCIe_ENGINE_DATA EngineData; ///< Engine data + IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info +} PCIe_DDI_DESCRIPTOR; + +/// PCIe Complex descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Bit31 - last descriptor in topology + */ + IN UINT32 SocketId; ///< Socket Id + IN const PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN const PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + IN VOID *Reserved; ///< Reserved for future use +} PCIe_COMPLEX_DESCRIPTOR; + +/// Action to control PCIe slot reset +typedef enum { + AssertSlotReset, ///< Assert slot reset + DeassertSlotReset ///< Deassert slot reset +} PCIE_RESET_CONTROL; + +///Slot Reset Info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 ResetId; ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR + IN UINT8 ResetControl; ///< Reset control as in PCIE_RESET_CONTROL +} PCIe_SLOT_RESET_INFO; + +#define GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST 0x1 + +///VBIOS image info +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT VOID *ImagePtr; ///< Pointer to VBIOS image + IN PCI_ADDR GfxPciAddress; ///< PCI address of integrated graphics controller + IN UINT32 Flags; ///< BIT[0] - special repost requred +} GFX_VBIOS_IMAGE_INFO; + +/// Engine descriptor type +typedef enum { + PcieUnusedEngine = 0, ///< Unused descriptor + PciePortEngine = 1, ///< PCIe port + PcieDdiEngine = 2, ///< DDI + MaxPcieEngine ///< Max engine type for boundary check. +} PCIE_ENGINE_TYPE; + +/// PCIe link capability/speed +typedef enum { + PcieGenMaxSupported, ///< Maximum supported + PcieGen1 = 1, ///< Gen1 + PcieGen2, ///< Gen2 + PcieGen3, ///< Gen3 + MaxPcieGen ///< Max Gen for boundary check +} PCIE_LINK_SPEED_CAP; + +/// PCIe PSPP Power policy +typedef enum { + PsppDisabled, ///< PSPP disabled + PsppPerformance = 1, ///< Performance + PsppBalanceHigh, ///< Balance-High + PsppBalanceLow, ///< Balance-Low + PsppPowerSaving, ///< Power Saving + MaxPspp ///< Max Pspp for boundary check +} PCIE_PSPP_POLICY; + +/// DDI display connector type +typedef enum { + ConnectorTypeDP, ///< DP + ConnectorTypeEDP, ///< eDP + ConnectorTypeSingleLinkDVI, ///< Single Link DVI-D + ConnectorTypeDualLinkDVI, ///< Dual Link DVI-D + ConnectorTypeHDMI, ///< HDMI + ConnectorTypeDpToVga, ///< DP-to-VGA + ConnectorTypeDpToLvds, ///< DP-to-LVDS + ConnectorTypeNutmegDpToVga, ///< Hudson-2 NutMeg DP-to-VGA + ConnectorTypeSingleLinkDviI, ///< Single Link DVI-I + ConnectorTypeCrt, ///< CRT (VGA) + ConnectorTypeLvds, ///< LVDS + ConnectorTypeEDPToLvds, ///< 3rd party common eDP-to-LVDS translator chip without AMD SW init + ConnectorTypeEDPToLvdsSwInit, ///< 3rd party eDP-to-LVDS translator which requires AMD SW init + ConnectorTypeAutoDetect, ///< VBIOS auto detect connector type (native LVDS, eDP or DP-to-LVDS) + MaxConnectorType ///< Not valid value, used to verify input +} PCIE_CONNECTOR_TYPE; + +/// PCIe link channel type +typedef enum { + ChannelTypeLowLoss, ///< Low Loss + ChannelTypeHighLoss, ///< High Loss + ChannelTypeMob0db, ///< Mobile 0dB + ChannelTypeMob3db, ///< Mobile 3dB + ChannelTypeExt6db, ///< Extended 6dB + ChannelTypeExt8db, ///< Extended 8dB + MaxChannelType ///< Not valid value, used to verify input +} PCIE_CHANNEL_TYPE; + +/// PCIe link ASPM +typedef enum { + AspmDisabled, ///< Disabled + AspmL0s, ///< PCIe L0s link state + AspmL1, ///< PCIe L1 link state + AspmL0sL1, ///< PCIe L0s & L1 link state + MaxAspm ///< Not valid value, used to verify input +} PCIE_ASPM_TYPE; + +/// PCIe link hotplug support +typedef enum { + HotplugDisabled, ///< Hotplug disable + HotplugBasic, ///< Basic Hotplug + HotplugServer, ///< Server Hotplug + HotplugEnhanced, ///< Enhanced + HotplugInboard, ///< Inboard + MaxHotplug ///< Not valid value, used to verify input +} PCIE_HOTPLUG_TYPE; + +/// PCIe link initialization +typedef enum { + PortDisabled, ///< Disable + PortEnabled ///< Enable +} PCIE_PORT_ENABLE; + +/// PCIe ACS capability - Access Control Services +typedef enum { + PcieAcsDisabled, ///< Disabled + PcieAcsEnabled, ///< Enabled +} PCIE_ACS_CAP; + +/// PCIe ClkPmSupport initialization +typedef enum { + ClkPmSupportDisabled, ///< Disable + ClkPmSupportEnabled ///< Enable +} CLKPM_SUPPORT_ENABLE; + +/// DDI Aux channel +typedef enum { + Aux1, ///< Aux1 + Aux2, ///< Aux2 + Aux3, ///< Aux3 + Aux4, ///< Aux4 + Aux5, ///< Aux5 + Aux6, ///< Aux6 + MaxAux ///< Not valid value, used to verify input +} PCIE_AUX_TYPE; + +/// DDI Hdp Index +typedef enum { + Hdp1, ///< Hdp1 + Hdp2, ///< Hdp2 + Hdp3, ///< Hdp3 + Hdp4, ///< Hdp4 + Hdp5, ///< Hdp5 + Hdp6, ///< Hdp6 + MaxHdp ///< Not valid value, used to verify input +} PCIE_HDP_TYPE; + +/// PCIe_DDI_DATA.Flags definitions +#define DDI_DATA_FLAGS_DP1_1_ONLY 0x01 ///< BIT[0] Selects downgrade PHY link to DP1.1 +#define EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN 0x02 ///< BIT[1] VBIOS will always output fixed voltage swing during DP link training +/// DP receiver definitions with fixed voltage swing +typedef enum { + DP_VS_0_4V_0DB, ///< 0x00 + DP_VS_0_6V_0DB, ///< 0x01 + DP_VS_0_8V_0DB, ///< 0x02 + DP_VS_1_2V_0DB, ///< 0x03 + DP_VS_0_4V_3_5DB = 0x8, ///< 0x08 + DP_VS_0_6V_3_5DB, ///< 0x09 + DP_VS_0_8V_3_5DB, ///< 0x0a + DP_VS_0_4V_6DB = 0x10, ///< 0x10 + DP_VS_0_6V_6DB, ///< 0x11 + DP_VS_0_4V_9_5DB = 0x18 ///< 0x18 +} DP_FIXED_VOLT_SWING_TYPE; + +// Macro for statically initializing various structures +#define PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane} +#define PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \ +{mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, 0}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_V2(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{ADAPT_IOC_ENABLED, ADAPT_DFE_CONTROL_DISABLED, ADAPT_LEQ_CONTROL_DC_GAIN_POLE, ADAPT_DOC_DISABLED, ADAPT_FOMC_ENABLED, ADAPT_PIOC_DISABLED}} +#define PCIE_PORT_DATA_INITIALIZER_GEN3(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport, \ +mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration) \ +{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect, \ +{mInitOffsetCancellation, mDFEControl, mLEQControl, mDynamicOffsetCalibration, mFOMCalculation, mPIOffsetCalibration}} +#define PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \ +{mConnectorType, mAuxIndex, mHpdIndex, {{0}, {0}}, 0, 0} +#define PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, 0} +#define PCIE_DDI_DATA_INITIALIZER_V2(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion, mFlags) \ +{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, mFlags} + +///IOMMU requestor ID +typedef struct { + IN UINT16 Bus :8; ///< Bus + IN UINT16 Device :5; ///< Device + IN UINT16 Function :3; ///< Function +} IOMMU_REQUESTOR_ID; + +/// IVMD exclusion range descriptor +typedef struct { + IN UINT32 Flags; /**< Descriptor flags + * @li @b Flags[31] - Terminate descriptor array. + * @li @b Flags[30] - Ignore descriptor. + */ + IN IOMMU_REQUESTOR_ID RequestorIdStart; ///< Requestor ID start + IN IOMMU_REQUESTOR_ID RequestorIdEnd; ///< Requestor ID end (use same as start for single ID) + IN UINT64 RangeBaseAddress; ///< Phisical base address of exclusion range + IN UINT64 RangeLength; ///< Length of exclusion range in bytes +} IOMMU_EXCLUSION_RANGE_DESCRIPTOR; + +/*---------------------------------------------------------------------------- + * GNB configuration info + *---------------------------------------------------------------------------- + */ + +/// LVDS Misc Control Field +typedef struct { + IN UINT8 FpdiMode:1; ///< This item configures LVDS 888bit panel mode + ///< @li FALSE = LVDS 888 panel in LDI mode + ///< @li TRUE = LVDS 888 panel in FPDI mode + ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE} + IN UINT8 DlChSwap:1; ///< This item configures LVDS panel lower and upper link mapping + ///< @li FALSE = Lower link and upper link not swap + ///< @li TRUE = Lower link and upper link are swapped + ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP} + IN UINT8 VsyncActiveLow:1; ///< This item configures polarity of frame pulse encoded in lvds data stream + ///< @li FALSE = Active high Frame Pulse/Vsync + ///< @li TRUE = Active low Frame Pulse/Vsync + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW} + IN UINT8 HsyncActiveLow:1; ///< This item configures polarity of line pulse encoded in lvds data + ///< @li FALSE = Active high Line Pulse + ///< @li TRUE = Active low Line Pulse / Hsync + ///< @BldCfgItem{BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW} + IN UINT8 BLONActiveLow:1; ///< This item configures polarity of signal sent to digital BLON output pin + ///< @li FALSE = Not inverted(active high) + ///< @li TRUE = Inverted (active low) + ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW} + IN UINT8 LvdsVoltOverwriteEn:1; ///< This item configures polarity of DP-to-LVDS output voltage overwrite + ///< @li FALSE = DP-to-LVDS output voltage overwrite disable, use VBIOS default setting. + ///< @li TRUE = Use ucLVDSVolAdjust value to program register LVDS_CTRL_4 + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE} + IN UINT8 Reserved:2; ///< Reserved +} LVDS_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _LVDS_MISC_CONTROL { + IN LVDS_MISC_CONTROL_FIELD Field; ///< LVDS_MISC_CONTROL_FIELD + IN UINT8 Value; ///< LVDS Misc Control Value +} LVDS_MISC_CONTROL; + +/// Display Misc Control Field +typedef struct { + IN UINT8 Reserved1:3; ///< Reserved + IN UINT8 VbiosFastBootEn:1; ///< This item configures VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open. + ///< @li FALSE = VBIOS fast boot is disable. + ///< @li TRUE = VBIOS fast boot is enable. + ///< @BldCfgItem{BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE} + IN UINT8 Reserved2:4; ///< Reserved +} DISPLAY_MISC_CONTROL_FIELD; + +/// LVDS Misc Control +typedef union _DISPLAY_MISC_CONTROL { + IN DISPLAY_MISC_CONTROL_FIELD Field; ///< DISPLAY_MISC_CONTROL_FIELD + IN UINT8 Value; ///< Display Misc Control Value +} DISPLAY_MISC_CONTROL; + +/// POST Configuration settings for GNB. +typedef struct { + IN UINT8 IgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use existing default - + ///< @li 1 = Disable iGPU if any PCIe/PCI graphics card present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} +} GNB_POST_CONFIGURATION; + +/// iGPU Enable/Disable Policy values +#define IGPU_DISABLE_AUTO 0 ///< Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics +#define IGPU_DISABLE_ANY_PCIE 1 ///< Disable iGPU if any PCI or PCIE graphics card is present + +/// ENV Configuration settings for GNB. +typedef struct { + IN UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + ///< @li 0 = Stereo 3D is disabled (default). + ///< @li 1 = Use processor pin HPD1. + ///< @li 2 = Use processor pin HPD2 + ///< @li 3 = Use processor pin HPD3 + ///< @li 4 = Use processor pin HPD4 + ///< @li 5 = Use processor pin HPD5 + ///< @li 6 = Use processor pin HPD6 + ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT} + IN BOOLEAN IommuSupport; ///< IOMMU support. + ///< @li FALSE = Disabled. Disable and hide IOMMU device. + ///< @li TRUE = Initialize IOMMU subsystem. Generate ACPI IVRS table. + ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT} + IN UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz + ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN UINT8 LvdsPowerOnSeqDigonToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE} + IN UINT8 LvdsPowerOnSeqDeToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL} + IN UINT8 LvdsPowerOnSeqDeToDigon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON} + IN UINT8 LvdsPowerOnSeqVaryBlToDe; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE} + IN UINT8 LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY} + IN UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON} + IN UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing. + ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL} + IN UINT16 LvdsMaxPixelClockFreq; ///< This item configures the maximum pixel clock frequency supported. + ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ} + IN UINT32 LcdBitDepthControlValue; ///< This item configures the LCD bit depth control settings. + ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE} + IN UINT8 Lvds24bbpPanelMode; ///< This item configures the LVDS 24 BBP mode. + ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE} + IN LVDS_MISC_CONTROL LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON + IN UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 % + ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN GnbRemoteDisplaySupport; ///< This item enables Wireless Display Support + ///< @li TRUE = Enable Wireless Display Support + ///< @li FALSE = Disable Wireless Display Support + ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT} + IN UINT8 LvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL DisplayMiscControl;///< This item configures display misc control + IN DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN UINT32 GpuFrequencyLimit; ///< GNB GPU Max Frequency(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} +} GNB_ENV_CONFIGURATION; + +/// Configuration settings for GNB. +typedef struct { + IN UINT8 iGpuVgaMode; ///< VGA resources decoding configuration for iGPU + ///< @li 0 = iGPU decode all VGA resources (must be primary VGA adapter) + ///< @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter) + IN UINT8 PcieAcsCapability; ///< Pcie ACS Capability support + ///< @li 0 = Disabled + ///< @li 1 = Enabled + IN UINT64 GnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} + IN UINT8 MaxNumAudioEndpoints; ///< Max number of audio endpoints + ///< @BldCfgItem{BLDCFG_MAX_NUM_AUDIO_ENDPOINTS} +} GNB_MID_CONFIGURATION; + +/// GNB configuration info +typedef struct { + IN const PCIe_COMPLEX_DESCRIPTOR *PcieComplexList; /**< Pointer to array of structures describe PCIe topology on each processor package or NULL. + * Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST + * Example of topology definition for single socket system: + * @code + * PCIe_PORT_DESCRIPTOR PortList [] = { + * // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * }, + * // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + * } + * }; + * PCIe_PORT_DESCRIPTOR DdiList [] = { + * // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...) + * { + * 0, //Descriptor flags + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1, 0) + * }, + * // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...) + * { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2, 0) + * } + * }; + * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = { + * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate complexes list + * 0, //Socket ID + * &PortList[0], + * &DdiList[0], + * } + * @endcode + */ + IN UINT8 PsppPolicy; /**< PSPP (PCIe Speed Power Policy) + * @li @b 0 - Disabled + * @li @b 1 - Performance + * @li @b 2 - Balance-High + * @li @b 3 - Balance-Low + * @li @b 4 - Power Saving + */ + +} GNB_CONFIGURATION; + +/// Late Configuration settings for GNB. +typedef struct { + IN BOOLEAN DockedTdpHeadroom; ///< Docked TDP headroom + ///< @li TRUE = Enable docked TDP headroom + ///< @li FALSE = Disable docked TDP headroom + ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} + IN UINT8 GnbIoapicId; ///< GNB IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_GNB_IOAPIC_ADDRESS == NULL or BLDCFG_IOMMU_SUPPORT == NULL or GnbIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + IN UINT8 FchIoapicId; ///< Fch IOAPIC ID, platform BIOS needs to pass correct id number, default is 0xFF. + ///< If BLDCFG_IOMMU_SUPPORT == NULL or or FchIoapicId == default(0xFF), AGESA will skip it anyway. + ///< @li 0~n = IOAPIC ID number for IVRS which should be matched with MADT + +} GNB_LATE_CONFIGURATION; + +// +// MEMORY-SPECIFIC DATA STRUCTURES +// +// +// +// +// AGESA MAXIMIUM VALUES +// +// These Max values are used to define array sizes and associated loop +// counts in the code. They reflect the maximum values that AGESA +// currently supports and does not necessarily reflect the hardware +// capabilities of configuration. +// + +#define MAX_SOCKETS_SUPPORTED 1 ///< Max number of sockets in system +#define MAX_CHANNELS_PER_SOCKET 4 ///< Max Channels per sockets +#define MAX_DIMMS_PER_CHANNEL 4 ///< Max DIMMs on a memory channel (independent of platform) +#define NUMBER_OF_DELAY_TABLES 9 ///< Number of tables defined in CH_DEF_STRUCT. + ///< Eg: UINT16 *RcvEnDlys; + ///< UINT8 *WrDqsDlys; + ///< UINT8 *RdDqsDlys; + ///< UINT8 *WrDatDlys; + ///< UINT8 *RdDqsMinDlys; + ///< UINT8 *RdDqsMaxDlys; + ///< UINT8 *WrDatMinDlys; + ///< UINT8 *WrDatMaxDlys; +#define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables + +#define MAX_PLATFORM_TYPES 16 ///< Platform types per system + +#define MCT_TRNG_KEEPOUT_START 0x00004000ul ///< base [39:8] +#define MCT_TRNG_KEEPOUT_END 0x00007FFFul ///< base [39:8] +#define DATAEYE_VREF_RANGE 31 ///< Number of VREF steps in Data Eye Bitmap + +#define UMA_ATTRIBUTE_INTERLEAVE 0x80000000ul ///< Uma Region is interleaved +#define UMA_ATTRIBUTE_ON_DCT0 0x40000000ul ///< UMA resides on memory that belongs to DCT0 +#define UMA_ATTRIBUTE_ON_DCT1 0x20000000ul ///< UMA resides on memory that belongs to DCT1 +#define UMA_ATTRIBUTE_ON_DCT2 0x10000000ul ///< UMA resides on memory that belongs to DCT2 +#define UMA_ATTRIBUTE_ON_DCT3 0x08000000ul ///< UMA resides on memory that belongs to DCT3 + +typedef UINT8 PSO_TABLE; ///< Platform Configuration Table + +// AGESA DEFINITIONS +// +// Many of these are derived from the platform and hardware specific definitions + +/// EccSymbolSize override value +#define ECCSYMBOLSIZE_USE_BKDG 0 ///< Use BKDG Recommended Value +#define ECCSYMBOLSIZE_FORCE_X4 4 ///< Force to x4 +#define ECCSYMBOLSIZE_FORCE_X8 8 ///< Force to x8 +/// CPU Package Type +#define PT_L1 0 ///< L1 Package type +#define PT_M2 1 ///< AM Package type +#define PT_S1 2 ///< S1 Package type + +/// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/// Build Configuration values for BLDCFG_TIMING_MODE_SELECT +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/// Build Configuration values for BLDCFG_POWER_DOWN_MODE +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode +#define POWER_DOWN_MODE_AUTO 2 ///< AGESA to select power down mode + +/// Build Configuration limit for BLDCFG_GNB_GPU_MAX_FREQUENCY +#define UNSUPPORTED_GPU_FREQUENCY 901 ///< Highest limit of GPU frequency + +/// Structures use to pass system Logical CPU-ID +typedef struct { + IN OUT UINT64 Family; ///< Indicates logical ID Family + IN OUT UINT64 Revision; ///< Indicates logical ID Family +} CPU_LOGICAL_ID; + +/// Structures use to report AMP status +typedef struct { + OUT BOOLEAN AmpVoltageValid; ///< Indicates if Amp voltage is valid + OUT BOOLEAN AmpSupportDetectedButNotEnabled; ///< Indicates if Amp support is detected but not enabled + OUT BOOLEAN AmpSelectedButNotEnabled; ///< Indicates if Amp is selected but not enabled +} AMP_STATUS; + +/// Normalized Critical Composite Data Eye +/// Bit 15 represents trained eye Center +/// Bit 0 represents eye center -15 delay steps +/// Bit 31 represents eye center +16 delay steps +/// Offset 0 represents +15 Vref Steps +/// Offset 31 represents -15 Vref Steps +typedef UINT32 COMPOSITE_DATAEYE[DATAEYE_VREF_RANGE]; + +/// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE +typedef enum { + AMD_PLATFORM_SERVER = 0x8000, ///< Server + AMD_PLATFORM_DESKTOP = 0x10000, ///< Desktop + AMD_PLATFORM_MOBILE = 0x20000, ///< Mobile +} AMD_PLATFORM_TYPE; + +/// Dram technology type +typedef enum { + DDR2_TECHNOLOGY, ///< DDR2 technology + DDR3_TECHNOLOGY, ///< DDR3 technology + GDDR5_TECHNOLOGY, ///< GDDR5 technology + UNSUPPORTED_TECHNOLOGY, ///< Unsupported technology +} TECHNOLOGY_TYPE; + +/// Low voltage support +typedef enum { + VOLT_INITIAL, ///< Initial value for VDDIO + VOLT1_5, ///< 1.5 Volt + VOLT1_35, ///< 1.35 Volt + VOLT1_25, ///< 1.25 Volt + VOLT_UNSUPPORTED = 0xFF ///< No common voltage found +} DIMM_VOLTAGE; + +/// AMP voltage support +typedef enum { + AMP_VOLT_RSVD, ///< Reserved + AMP_VOLT1_5, ///< 1.5 Volt + AMP_VOLT1_55, ///< 1.55 Volt + AMP_VOLT1_6, ///< 1.6 Volt + AMP_VOLT1_65, ///< 1.65 Volt + AMP_VOLT1_7, ///< 1.7 Volt + AMP_VOLT1_75, ///< 1.75 Volt + AMP_VOLT1_8, ///< 1.8 Volt + AMP_VOLT1_85, ///< 1.85 Volt + AMP_VOLT1_9, ///< 1.9 Volt + AMP_VOLT1_45 = 0x10, ///< 1.45 Volt + AMP_VOLT1_4 = 0x20, ///< 1.4 Volt + AMP_VOLT1_35 = 0x30, ///< 1.35 Volt + AMP_VOLT1_3 = 0x40, ///< 1.3 Volt + AMP_VOLT1_25 = 0x50, ///< 1.25 Volt + AMP_VOLT1_2 = 0x60 ///< 1.2 Volt +} AMP_DIMM_VOLTAGE; + +/// Build Configuration values for BLDCFG_ACP_SIZE +typedef enum { + NO_ACP_SIZE = 0x00, ///< NO ACP + ACP_SIZE_2MB = 0x20, ///< UMA 4MB aligned + ACP_SIZE_4MB = 0x40, ///< UMA 128MB aligned +} ACP_SIZE; + +/// UMA Mode +typedef enum { + UMA_NONE = 0, ///< UMA None + UMA_SPECIFIED = 1, ///< UMA Specified + UMA_AUTO = 2 ///< UMA Auto +} UMA_MODE; + +/// Force Training Mode +typedef enum { + FORCE_TRAIN_1D = 0, ///< 1D Training only + FORCE_TRAIN_2D = 1, ///< 2D Training only + FORCE_TRAIN_AUTO = 2 ///< Auto - 1D or 2D depending on configuration +} FORCE_TRAIN_MODE; + +/// PMU Training Mode +typedef enum { + PMU_TRAIN_1D = 0, ///< PMU 1D Training only + PMU_TRAIN_1D_2D_READ = 1, ///< PMU 1D and 2D Training read only + PMU_TRAIN_1D_2D = 2, ///< PMU 1D and 2D Training + PMU_TRAIN_AUTO = 3 ///< Auto - PMU Training depend on configuration +} PMU_TRAIN_MODE; + +/// The possible DRAM prefetch mode settings. +typedef enum { + DRAM_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_DRAM_PREFETCH_FOR_IO, ///< Disable DRAM prefetching for I/O requests only. + DISABLE_DRAM_PREFETCH_FOR_CPU, ///< Disable DRAM prefetching for requests from processor cores only. + DISABLE_DRAM_PREFETCHER, ///< Disable DRAM prefetching. + MAX_DRAM_FREFETCH_MODE ///< Not a DRAM prefetch mode, use for limit checking. +} DRAM_PREFETCH_MODE; + +/// Build Configuration values for BLDCFG_UMA_ALIGNMENT +typedef enum { + NO_UMA_ALIGNED = 0x00FFFFFF, ///< NO UMA aligned + UMA_4MB_ALIGNED = 0x00FFFFC0, ///< UMA 4MB aligned + UMA_128MB_ALIGNED = 0x00FFF800, ///< UMA 128MB aligned + UMA_256MB_ALIGNED = 0x00FFF000, ///< UMA 256MB aligned + UMA_512MB_ALIGNED = 0x00FFE000, ///< UMA 512MB aligned +} UMA_ALIGNMENT; + +/// +/// Global MCT Configuration Status Word (GStatus) +/// +typedef enum { + GsbMTRRshort, ///< Ran out of MTRRs while mapping memory + GsbAllECCDimms, ///< All banks of all Nodes are ECC capable + GsbDramECCDis, ///< Dram ECC requested but not enabled. + GsbSoftHole, ///< A Node Base gap was created + GsbHWHole, ///< A HW dram remap was created + GsbNodeIntlv, ///< Node Memory interleaving was enabled + GsbSpIntRemapHole, ///< Special condition for Node Interleave and HW remapping + GsbEnDIMMSpareNW, ///< Indicates that DIMM Spare can be used without a warm reset + + GsbEOL ///< End of list +} GLOBAL_STATUS_FIELD; + +/// +/// Local Error Status (DIE_STRUCT.ErrStatus[31:0]) +/// +typedef enum { + EsbNoDimms, ///< No DIMMs + EsbSpdChkSum, ///< SPD Checksum fail + EsbDimmMismatchM, ///< dimm module type(buffer) mismatch + EsbDimmMismatchT, ///< dimm CL/T mismatch + EsbDimmMismatchO, ///< dimm organization mismatch (128-bit) + EsbNoTrcTrfc, ///< SPD missing Trc or Trfc info + EsbNoCycTime, ///< SPD missing byte 23 or 25 + EsbBkIntDis, ///< Bank interleave requested but not enabled + EsbDramECCDis, ///< Dram ECC requested but not enabled + EsbSpareDis, ///< Online spare requested but not enabled + EsbMinimumMode, ///< Running in Minimum Mode + EsbNoRcvrEn, ///< No DQS Receiver Enable pass window found + EsbSmallRcvr, ///< DQS Rcvr En pass window too small (far right of dynamic range) + EsbNoDqsPos, ///< No DQS-DQ passing positions + EsbSmallDqs, ///< DQS-DQ passing window too small + EsbDCBKScrubDis, ///< DCache scrub requested but not enabled + + EsbEMPNotSupported, ///< Processor is not capable for EMP. + EsbEMPConflict, ///< EMP requested but cannot be enabled since + ///< channel interleaving, bank interleaving, or bank swizzle is enabled. + EsbEMPDis, ///< EMP requested but cannot be enabled since + ///< memory size of each DCT is not a power of two. + + EsbEOL ///< End of list +} ERROR_STATUS_FIELD; + +/// +/// Local Configuration Status (DIE_STRUCT.Status[31:0]) +/// +typedef enum { + SbRegistered, ///< All DIMMs are Registered + SbEccDimms, ///< All banks ECC capable + SbParDimms, ///< All banks Addr/CMD Parity capable + SbDiagClks, ///< Jedec ALL slots clock enable diag mode + Sb128bitmode, ///< DCT in 128-bit mode operation + Sb64MuxedMode, ///< DCT in 64-bit mux'ed mode. + Sb2TMode, ///< 2T CMD timing mode is enabled. + SbSWNodeHole, ///< Remapping of Node Base on this Node to create a gap. + SbHWHole, ///< Memory Hole created on this Node using HW remapping. + SbOver400Mhz, ///< DCT freq greater than or equal to 400MHz flag + SbDQSPosPass2, ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz + SbDQSRcvLimit, ///< Used for DQSRcvEnTrain to know we have reached the upper bound. + SbExtConfig, ///< Indicate the default setting for extended PCI configuration support + SbLrdimms, ///< All DIMMs are LRDIMMs + + SbEOL ///< End of list +} LOCAL_STATUS_FIELD; + + +///< CPU MSR Register definitions ------------------------------------------ +#define SYS_CFG 0xC0010010ul +#define TOP_MEM 0xC001001Aul +#define TOP_MEM2 0xC001001Dul +#define HWCR 0xC0010015ul +#define NB_CFG 0xC001001Ful + +#define FS_BASE 0xC0000100ul +#define IORR0_BASE 0xC0010016ul +#define IORR0_MASK 0xC0010017ul +#define BU_CFG 0xC0011023ul +#define BU_CFG2 0xC001102Aul +#define COFVID_STAT 0xC0010071ul +#define TSC 0x10 + +//----------------------------------------------------------------------------- +/// +/// SPD Data for each DIMM. +/// +typedef struct _SPD_DEF_STRUCT { + IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid + IN UINT8 Data[256]; ///< Buffer for 256 Bytes of SPD data from DIMM +} SPD_DEF_STRUCT; + + +//----------------------------------------------------------------------------- +/// +/// VDDP_VDDR Voltage Info for Low Power DIMM +/// +typedef struct _VDDP_VDDR_VOLTAGE { + IN BOOLEAN IsValid; ///< Indicates if daata is valid + IN MEMORY_PHY_VOLTAGE Voltage; ///< VDDP VDDR Voltage Value +} VDDP_VDDR_VOLTAGE; + +/// +/// Channel Definition Structure. +/// This data structure defines entries that are specific to the channel initialization +/// +typedef struct _CH_DEF_STRUCT { + OUT UINT8 ChannelID; ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) + OUT TECHNOLOGY_TYPE TechType; ///< Technology type of this channel + OUT UINT8 ChDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + + OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel. + OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel. + OUT SPD_DEF_STRUCT *SpdPtr; ///< Pointer to the SPD data for this channel. (Setup by NB Constructor) + OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to + ///< SPD Data for each Dimm. (Setup by Tech Block Constructor) + OUT UINT8 ChDimmValid; ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. + ///< + OUT UINT8 RegDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. + OUT UINT8 LrDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. + OUT UINT8 SODimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved. + OUT UINT8 Loads; ///< Number of devices loading bus + OUT UINT8 Dimms; ///< Number of DIMMs loading Channel + OUT UINT8 Ranks; ///< Number of ranks loading Channel DATA + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + ///< FALSE = 1T + ///< TRUE = 2T + ///< The following pointers will be pointed to dynamically allocated buffers. + ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. + ///< Example: If DIMM and Byte based training, then + ///< XX is a value in Hex + ///< BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE + ///< Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX + ///< Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX + OUT UINT16 *RcvEnDlys; ///< DQS Receiver Enable Delays + OUT UINT8 *WrDqsDlys; ///< Write DQS delays (only valid for DDR3) + OUT UINT8 *RdDqsDlys; ///< Read Dqs delays + OUT UINT8 *WrDatDlys; ///< Write Data delays + OUT UINT8 *RdDqs2dDlys; ///< 2d Read DQS data + OUT UINT8 *RdDqsMinDlys; ///< Minimum Window for Read DQS + OUT UINT8 *RdDqsMaxDlys; ///< Maximum Window for Read DQS + OUT UINT8 *WrDatMinDlys; ///< Minimum Window for Write data + OUT UINT8 *WrDatMaxDlys; ///< Maximum Window for Write data + OUT UINT16 *RcvEnDlysMemPs1; ///< DQS Receiver Enable Delays for Mem Pstate 1 + OUT UINT8 *WrDqsDlysMemPs1; ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1 + OUT UINT8 *RdDqsDlysMemPs1; ///< Read Dqs delays for Memory Pstate 1 + OUT UINT8 *WrDatDlysMemPs1; ///< Write Data delays for Memory Pstate 1 + OUT UINT8 *RdDqs2dDlysMemPs1; ///< 2d Read DQS data for Memory Pstate 1 + OUT UINT8 *RdDqsMinDlysMemPs1; ///< Minimum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *RdDqsMaxDlysMemPs1; ///< Maximum Window for Read DQS for Memory Pstate 1 + OUT UINT8 *WrDatMinDlysMemPs1; ///< Minimum Window for Write data for Memory Pstate 1 + OUT UINT8 *WrDatMaxDlysMemPs1; ///< Maximum Window for Write data for Memory Pstate 1 + OUT UINT8 RowCount; ///< Number of rows of the allocated buffer. + OUT UINT8 ColumnCount; ///< Number of columns of the allocated buffer. + OUT UINT8 *FailingBitMask; ///< Table of masks to Track Failing bits + OUT UINT8 *FailingBitMaskMemPs1; ///< Table of masks to Track Failing bits for Memory Pstate 1 + OUT VOID *RdDataEyes; ///< Pointer to Read Data Eye Bitmaps + OUT VOID *WrDataEyes; ///< Pointer to Write Data Eye Bitmaps + OUT UINT32 DctOdcCtl; ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) + OUT UINT32 DctAddrTmg; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) + OUT UINT32 PhyRODTCSLow; ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) + OUT UINT32 PhyRODTCSHigh; ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) + OUT UINT32 PhyWODTCSLow; ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) + OUT UINT32 PhyWODTCSHigh; ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) + OUT UINT8 PhyWLODT[4]; ///< Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) + OUT UINT16 DctEccDqsLike; ///< DCT DQS ECC UINT8 like... + OUT UINT8 DctEccDqsScale; ///< DCT DQS ECC UINT8 scale + OUT UINT16 PtrPatternBufA; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT16 PtrPatternBufB; ///< Ptr on stack to aligned DQS testing pattern + OUT UINT8 ByteLane; ///< Current UINT8 Lane (0..7) + OUT UINT8 Direction; ///< Current DQS-DQ training write direction (0=read, 1=write) + OUT UINT8 Pattern; ///< Current pattern + OUT UINT8 DqsDelay; ///< Current DQS delay value + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + OUT UINT16 DctMaxRdLat[4]; ///< Max Read Latency (ns) for the DCT + ///< DctMaxRdLat [i] is for NBPstate i + OUT UINT8 DIMMValidCh; ///< DIMM# in CH + OUT UINT8 MaxCh; ///< Max number of CH in system + OUT UINT8 Dct; ///< Dct pointer + OUT UINT8 WrDatGrossH; ///< Write Data Gross delay high value + OUT UINT8 DqsRcvEnGrossL; ///< DQS Receive Enable Gross Delay low + + OUT UINT8 TrwtWB; ///< Non-SPD timing value for TrwtWB + OUT UINT8 CurrRcvrDctADelay; ///< for keep current RcvrEnDly + OUT UINT16 T1000; ///< get the T1000 figure (cycle time (ns) * 1K) + OUT UINT8 DqsRcvEnPass; ///< for TrainRcvrEn UINT8 lane pass flag + OUT UINT8 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag + OUT UINT8 SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training + + OUT UINT8 ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory + OUT UINT32 NodeSysBase; ///< for channel interleave usage + OUT UINT8 RefRawCard[MAX_DIMMS_PER_CHANNEL]; ///< Array of rawcards detected + OUT UINT8 CtrlWrd02[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 2 values per DIMM + OUT UINT8 CtrlWrd03[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 3 values per DIMM + OUT UINT8 CtrlWrd04[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 4 values per DIMM + OUT UINT8 CtrlWrd05[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 5 values per DIMM + OUT UINT8 CtrlWrd08[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 8 values per DIMM + + OUT UINT16 CsPresentDCT; ///< For each bit n 0..7, 1 = Chip-select n is present + OUT UINT8 DimmMirrorPresent; ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT8 DimmSpdCse; ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT8 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT8 DimmYr06; ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006 + OUT UINT8 DimmWk2406; ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) + OUT UINT8 DimmPlPresent; ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. + OUT UINT8 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT8 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present + OUT UINT8 Dimmx4Present; ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx8Present; ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. + OUT UINT8 Dimmx16Present; ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. + OUT UINT8 LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs + OUT UINT8 LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration + OUT UINT8 LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm. + OUT UINT8 DimmNibbleAccess; ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. + OUT UINT8 *MemClkDisMap; ///< This pointer will be set to point to an array that describes + ///< the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will + ///< base on this array to disable unused MemClk to save power. + ///< + ///< The array must have 8 entries. Each entry, which associates with + ///< one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. + ///< Example: + ///< BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package + ///< is like below: + ///< Bit AM3/S1g3 pin name + ///< 0 M[B,A]_CLK_H/L[0] + ///< 1 M[B,A]_CLK_H/L[1] + ///< 2 M[B,A]_CLK_H/L[2] + ///< 3 M[B,A]_CLK_H/L[3] + ///< 4 M[B,A]_CLK_H/L[4] + ///< 5 M[B,A]_CLK_H/L[5] + ///< 6 M[B,A]_CLK_H/L[6] + ///< 7 M[B,A]_CLK_H/L[7] + ///< And platform has the following routing: + ///< CS0 M[B,A]_CLK_H/L[4] + ///< CS1 M[B,A]_CLK_H/L[2] + ///< CS2 M[B,A]_CLK_H/L[3] + ///< CS3 M[B,A]_CLK_H/L[5] + ///< Then MemClkDisMap should be pointed to the following array: + ///< CLK_2 CLK_3 CLK_4 CLK_5 + ///< 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 + ///< Each entry of the array is the bitmask of 8 chip selects. + + OUT UINT8 *CKETriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of CKE pins to the DIMMs' ranks. + ///< The array must have 2 entries. Each entry, which associates with + ///< one CKE pin, is a bitmap of 8 CS that that CKE is routed to. + ///< AGESA will base on this array to disable unused CKE pins to save power. + + OUT UINT8 *ODTTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of ODT pins to the DIMMs' ranks. + ///< The array must have 4 entries. Each entry, which associates with + ///< one ODT pin, is a bitmap of 8 CS that that ODT is routed to. + ///< AGESA will base on this array to disable unused ODT pins to save power. + + OUT UINT8 *ChipSelTriMap; ///< This pointer will be set to point to an array that describes + ///< the routing of chip select pins to the DIMMs' ranks. + ///< The array must have 8 entries. Each entry is a bitmap of 8 CS. + ///< AGESA will base on this array to disable unused Chip select pins to save power. + + OUT BOOLEAN ExtendTmp; ///< If extended temperature is supported on all dimms on a channel. + + OUT UINT8 MaxVref; ///< Maximum Vref Value for channel + + OUT UINT8 Reserved[100]; ///< Reserved +} CH_DEF_STRUCT; + +/// +/// DCT Channel Timing Parameters. +/// This data structure sets timings that are specific to the channel. +/// +typedef struct _CH_TIMING_STRUCT { + OUT UINT16 DctDimmValid; ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. + OUT UINT16 DimmMirrorPresent; ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. + OUT UINT16 DimmSpdCse; ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. + OUT UINT16 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. + OUT UINT16 CsPresent; ///< For each bit n 0..7, 1=Chip-select n is present + OUT UINT16 CsEnabled; ///< For each bit n 0..7, 1=Chip-select n is enabled + OUT UINT16 CsTestFail; ///< For each bit n 0..7, 1=Chip-select n is present but disabled + OUT UINT16 CsTrainFail; ///< Bitmap showing which chipselects failed training + OUT UINT16 DIMM1KPage; ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved + OUT UINT16 DimmQrPresent; ///< QuadRank DIMM present? + OUT UINT16 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved + OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved + OUT UINT16 Dimmx4Present; ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved + OUT UINT16 Dimmx8Present; ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved + OUT UINT16 Dimmx16Present; ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved + + OUT UINT16 DIMMTrcd; ///< Minimax Trcd*40 (ns) of DIMMs + OUT UINT16 DIMMTrp; ///< Minimax Trp*40 (ns) of DIMMs + OUT UINT16 DIMMTrtp; ///< Minimax Trtp*40 (ns) of DIMMs + OUT UINT16 DIMMTras; ///< Minimax Tras*40 (ns) of DIMMs + OUT UINT16 DIMMTrc; ///< Minimax Trc*40 (ns) of DIMMs + OUT UINT16 DIMMTwr; ///< Minimax Twr*40 (ns) of DIMMs + OUT UINT16 DIMMTrrd; ///< Minimax Trrd*40 (ns) of DIMMs + OUT UINT16 DIMMTwtr; ///< Minimax Twtr*40 (ns) of DIMMs + OUT UINT16 DIMMTfaw; ///< Minimax Tfaw*40 (ns) of DIMMs + OUT UINT16 TargetSpeed; ///< Target DRAM bus speed in MHz + OUT UINT16 Speed; ///< DRAM bus speed in MHz + ///< 400 (MHz) + ///< 533 (MHz) + ///< 667 (MHz) + ///< 800 (MHz) + ///< and so on... + OUT UINT8 CasL; ///< CAS latency DCT setting (busclocks) + OUT UINT8 Trcd; ///< DCT Trcd (busclocks) + OUT UINT8 Trp; ///< DCT Trp (busclocks) + OUT UINT8 Trtp; ///< DCT Trtp (busclocks) + OUT UINT8 Tras; ///< DCT Tras (busclocks) + OUT UINT8 Trc; ///< DCT Trc (busclocks) + OUT UINT8 Twr; ///< DCT Twr (busclocks) + OUT UINT8 Trrd; ///< DCT Trrd (busclocks) + OUT UINT8 Twtr; ///< DCT Twtr (busclocks) + OUT UINT8 Tfaw; ///< DCT Tfaw (busclocks) + OUT UINT8 Trfc0; ///< DCT Logical DIMM0 Trfc + ///< 0 = 75ns (for 256Mb devs) + ///< 1 = 105ns (for 512Mb devs) + ///< 2 = 127.5ns (for 1Gb devs) + ///< 3 = 195ns (for 2Gb devs) + ///< 4 = 327.5ns (for 4Gb devs) + OUT UINT8 Trfc1; ///< DCT Logical DIMM1 Trfc (see Trfc0 for format) + OUT UINT8 Trfc2; ///< DCT Logical DIMM2 Trfc (see Trfc0 for format) + OUT UINT8 Trfc3; ///< DCT Logical DIMM3 Trfc (see Trfc0 for format) + OUT UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT. + ///< + OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) + ///< FALSE = 1T + ///< TRUE = 2T + OUT UINT8 TrwtTO; ///< DCT TrwtTO (busclocks) + OUT UINT8 Twrrd; ///< DCT Twrrd (busclocks) + OUT UINT8 Twrwr; ///< DCT Twrwr (busclocks) + OUT UINT8 Trdrd; ///< DCT Trdrd (busclocks) + OUT UINT8 TrwtWB; ///< DCT TrwtWB (busclocks) + OUT UINT8 TrdrdSD; ///< DCT TrdrdSD (busclocks) + OUT UINT8 TwrwrSD; ///< DCT TwrwrSD (busclocks) + OUT UINT8 TwrrdSD; ///< DCT TwrrdSD (busclocks) + OUT UINT16 MaxRdLat; ///< Max Read Latency + OUT UINT8 WrDatGrossH; ///< Temporary variables must be removed + OUT UINT8 DqsRcvEnGrossL; ///< Temporary variables must be removed +} CH_TIMING_STRUCT; + +/// +/// Data for each DCT. +/// This data structure defines data used to configure each DRAM controller. +/// +typedef struct _DCT_STRUCT { + OUT UINT8 Dct; ///< Current Dct + OUT CH_TIMING_STRUCT Timings; ///< Channel Timing structure + OUT CH_TIMING_STRUCT *TimingsMemPs1; ///< Pointed to channel timing structure for memory Pstate 1 + OUT CH_DEF_STRUCT *ChData; ///< Pointed to a dynamically allocated array of Channel structures + OUT UINT8 ChannelCount; ///< Number of channel per this DCT + OUT BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT + OUT UINT8 BankAddrMap; ///< Bank Address Mapping + OUT UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT +} DCT_STRUCT; + + +/// +/// Data Structure defining each Die. +/// This data structure contains information that is used to configure each Die. +/// +typedef struct _DIE_STRUCT { + + /// Advanced: + + OUT UINT8 NodeId; ///< Node ID of current controller + OUT UINT8 SocketId; ///< Socket ID of this Die + OUT UINT8 DieId; ///< ID of this die relative to the socket + OUT PCI_ADDR PciAddr; ///< Pci bus and device number of this controller. + OUT AGESA_STATUS ErrCode; ///< Current error condition of Node + ///< 0x0 = AGESA_SUCCESS + ///< 0x1 = AGESA_UNSUPPORTED + ///< 0x2 = AGESA_BOUNDS_CHK + ///< 0x3 = AGESA_ALERT + ///< 0x4 = AGESA_WARNING + ///< 0x5 = AGESA_ERROR + ///< 0x6 = AGESA_CRITICAL + ///< 0x7 = AGESA_FATAL + ///< + OUT BOOLEAN ErrStatus[EsbEOL]; ///< Error Status bit Field + ///< + OUT BOOLEAN Status[SbEOL]; ///< Status bit Field + ///< + OUT UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. + ///< + OUT UINT32 NodeSysBase; ///< Base[47:16] (system address) DRAM base address of this Node. + ///< + OUT UINT32 NodeHoleBase; ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node + ///< + OUT UINT32 NodeSysLimit; ///< Base[47:16] (system address) DRAM limit address of this Node. + ///< + OUT UINT32 DimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. + ///< DIMM# Select Signal + ///< 0 MA0_CS_L[0, 1] + ///< 1 MB0_CS_L[0, 1] + ///< 2 MA1_CS_L[0, 1] + ///< 3 MB1_CS_L[0, 1] + ///< 4 MA2_CS_L[0, 1] + ///< 5 MB2_CS_L[0, 1] + ///< 6 MA3_CS_L[0, 1] + ///< 7 MB3_CS_L[0, 1] + ///< + OUT UINT32 DimmValid; ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured + OUT UINT32 RegDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is registered DIMM + OUT UINT32 LrDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM + OUT UINT32 DimmEccPresent; ///< For each bit n 0..7, 1 = DIMM n is ECC capable. + OUT UINT32 DimmParPresent; ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. + ///< + OUT UINT16 DimmTrainFail; ///< Bitmap showing which dimms failed training + OUT UINT16 ChannelTrainFail; ///< Bitmap showing the channel information about failed Chip Selects + ///< 0 in any bit field indicates Channel 0 + ///< 1 in any bit field indicates Channel 1 + OUT UINT8 Dct; ///< Need to be removed + ///< DCT pointer + OUT BOOLEAN GangedMode; ///< Ganged mode + ///< 0 = disabled + ///< 1 = enabled + OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node + ///< + OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. + ///< + OUT UINT8 MLoad; ///< Need to be removed + ///< Number of devices loading MAA bus + ///< + OUT UINT8 MaxAsyncLat; ///< Legacy wrapper + ///< + OUT UINT8 ChbD3Rcvrdly; ///< Legacy wrapper + ///< + OUT UINT16 ChaMaxRdLat; ///< Max Read Latency (ns) for DCT 0 + ///< + OUT UINT8 ChbD3BcRcvrdly; ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay + + OUT DCT_STRUCT *DctData; ///< Pointed to a dynamically allocated array of DCT_STRUCTs + OUT UINT8 DctCount; ///< Number of DCTs per this Die + OUT UINT8 Reserved[16]; ///< Reserved +} DIE_STRUCT; + +/********************************************************************** + * S3 Support structure + **********************************************************************/ +/// AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure +typedef struct { + OUT UINT32 Signature; ///< "ASTR" for AMD Suspend-To-RAM + OUT UINT16 Version; ///< S3 Params version number + IN OUT UINT32 Flags; ///< Indicates operation + IN OUT VOID *NvStorage; ///< Pointer to memory critical save state data + IN OUT UINT32 NvStorageSize; ///< Size in bytes of the NvStorage region + IN OUT VOID *VolatileStorage; ///< Pointer to remaining AMD save state data + IN OUT UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region +} AMD_S3_PARAMS; + +///=============================================================================== +/// MEM_PARAMETER_STRUCT +/// This data structure is used to pass wrapper parameters to the memory configuration code +/// +typedef struct _MEM_PARAMETER_STRUCT { + + // Basic (Return parameters) + // (This section contains the outbound parameters from the memory init code) + + OUT BOOLEAN GStatus[GsbEOL]; ///< Global Status bitfield. + ///< + OUT UINT32 HoleBase; ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. + ///< + OUT UINT32 Sub4GCacheTop; ///< If not zero, the 32-bit top of cacheable memory. + ///< + OUT UINT32 Sub1THoleBase; ///< If not zero Base[47:16] (system address) of sub 1TB dram hole. + ///< + OUT UINT32 SysLimit; ///< Limit[47:16] (system address). + ///< + OUT DIMM_VOLTAGE DDR3Voltage; ///< Find support voltage and send back to platform BIOS. + ///< + OUT VDDP_VDDR_VOLTAGE VddpVddrVoltage; ///< For a given configuration, request is made to change the VDDP/VDDR + ///< voltage in platform BIOS via AgesaHookBeforeDramInit callout and + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage parameter if + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.IsValid is TRUE. The + ///< MEM_PARAMETER_STRUCT.VddpVddrVoltage.Voltage is defined in + ///< MEMORY_PHY_VOLTAGE + OUT UINT8 ExternalVrefValue; ///< Target reference voltage for external Vref for 2D training + ///< + OUT struct _MEM_DATA_STRUCT *MemData; ///< Access to global memory init data. + + // Advanced (Optional parameters) + // Optional (all defaults values will be initialized by the + // 'AmdMemInitDataStructDef' based on AMD defaults. It is up + // to the IBV/OEM to change the defaults after initialization + // but prior to the main entry to the memory code): + + // Memory Map/Mgt. + + IN UINT16 BottomIo; ///< Bottom of 32-bit IO space (8-bits). + ///< NV_BOTTOM_IO[7:0]=Addr[31:24] + ///< + IN BOOLEAN MemHoleRemapping; ///< Memory Hole Remapping (1-bit). + ///< FALSE = disable + ///< TRUE = enable + ///< + IN BOOLEAN LimitMemoryToBelow1Tb;///< Limit memory address space to below 1 TB + ///< FALSE = disable + ///< TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB} + + + // Dram Timing + + IN UINT32 UserTimingMode; ///< User Memclock Mode. + ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT} + + IN UINT32 MemClockValue; ///< Memory Clock Value. + ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT} + + + // Dram Configuration + + IN BOOLEAN EnableBankIntlv; ///< Dram Bank (chip-select) Interleaving (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING} + + IN BOOLEAN EnableNodeIntlv; ///< Node Memory Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING} + + IN BOOLEAN EnableChannelIntlv; ///< Channel Interleaving (1-bit). + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING} + // DllPDBypassMode + + IN BOOLEAN EnableDllPDBypassMode;///< Enable low-power DDR phy operation. This feature is used for low-power + ///< solder-down DRAM motherboard designs with route matched CK/DQS/DQ signals. + ///< It limits maximim achieveable DDR rates on the platform and should not be + ///< enabled for systems requiring high DDR rate operation and/or DIMM-based systems. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_DDR_PHY_DLL_BYPASS_MODE} + // ECC + + IN BOOLEAN EnableEccFeature; ///< enable ECC error to go into MCE. + ///< - FALSE = disable (default) + ///< - TRUE = enable + ///< + ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE} + // Dram Power + + IN BOOLEAN EnablePowerDown; ///< CKE based power down mode (1-bit). + ///< - FALSE =disable (default) + ///< - TRUE =enable + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN} + + // Online Spare + + IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0. + ///< - FALSE = disable Spare (default) + ///< - TRUE = enable Spare + ///< + ///< @BldCfgItem{BLDCFG_ONLINE_SPARE} + + IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings. + + IN PSO_TABLE *PlatformMemoryConfiguration; + ///< A table that contains platform specific settings. + ///< For example, MemClk routing, the number of DIMM slots per channel, .... + ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that + ///< contains default conservative settings. Platform BIOS can either tweak + ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. + ///< + IN BOOLEAN EnableParity; ///< Parity control. + ///< - TRUE = enable + ///< - FALSE = disable (default) + ///< + ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE} + + IN BOOLEAN EnableBankSwizzle; ///< BankSwizzle control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE} + + ///< + + IN BOOLEAN EnableMemClr; ///< Memory Clear functionality control. + ///< - FALSE = disable + ///< - TRUE = enable (default) + ///< + + // Uma Configuration + + IN UMA_MODE UmaMode; ///< Uma Mode + ///< 0 = None + ///< 1 = Specified + ///< 2 = Auto + IN OUT UINT32 UmaSize; ///< The size of shared graphics dram (16-bits) + ///< NV_UMA_Size[31:0]=Addr[47:16] + ///< + OUT UINT32 UmaBase; ///< The allocated Uma base address (32-bits) + ///< NV_UMA_Base[31:0]=Addr[47:16] + ///< + + /// Memory Restore Feature + + IN BOOLEAN MemRestoreCtl; ///< Memory context restore control + ///< FALSE = perform memory init as normal (AMD default) + ///< TRUE = restore memory context and skip training. This requires + ///< MemContext is valid before AmdInitPost + ///< + IN BOOLEAN SaveMemContextCtl; ///< Control switch to save memory context at the end of MemAuto + ///< TRUE = AGESA will setup MemContext block before exit AmdInitPost + ///< FALSE = AGESA will not setup MemContext block. Platform is + ///< expected to call S3Save later in POST if it wants to + ///< use memory context restore feature. + ///< + IN OUT AMD_S3_PARAMS MemContext; ///< Memory context block describes the data that platform needs to + ///< save and restore for memory context restore feature to work. + ///< It uses the subset of S3Save block to save/restore. Hence platform + ///< may save only S3 block and uses it for both S3 resume and + ///< memory context restore. + ///< - If MemRestoreCtl is TRUE, platform needs to pass in MemContext + ///< before AmdInitPost. + ///< - If SaveMemContextCtl is TRUE, platform needs to save MemContext + ///< right after AmdInitPost. + ///< + IN BOOLEAN IsCapsuleMode; ///< Capsule reboot control + ///< FALSE = This is not a capsule reboot. + ///< TRUE = This is a capsule reboot. + ///< + IN BOOLEAN ExternalVrefCtl; ///< Control the use of external Vref + ///< TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list + ///< to change the vref + ///< FALSE = AGESA will will use the internal vref control. + ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE} + ///< + IN FORCE_TRAIN_MODE ForceTrainMode; ///< Training Mode + ///< 0 = Force 1D Training for all configurations + ///< 1 = Force 2D Training for all configurations + ///< 2 = Auto - AGESA will control 1D or 2D + IN TECHNOLOGY_TYPE DimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + ///< DDR3_TECHNOLOGY = Use DDR3 DIMMs + ///< GDDR5_TECHNOLOGY = Use GDDR5 DIMMs + ///< UNSUPPORTED_TECHNOLOGY = Exit with fatal error when DDR3 and GDDR5 DIMMs + ///< are installed on the same system + ///< @BldCfgItem{BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG} + IN BOOLEAN AmpEnable; ///< AMP functionality control + ///< TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA + ///< detects if memory is capable of it + ///< FALSE = Disable, there is no request to enable memory overclocking function + ///< + IN BOOLEAN AmpWarningMsgEnable; ///< AMP warning messages control + ///< TRUE = Enable to log the warning messages of AMP + ///< FALSE = Disable + ///< + OUT AMP_STATUS AmpStatus; ///< AMP status allows platform BIOS to check which voltage or warning message it should + ///< use/apply. + ///< + ///< AmpVoltageValid : + ///< TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment + ///< FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment + ///< + ///< AmpSupportDetectedButNotEnabled : + ///< TRUE - Display warning message of "AMP support detected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< AmpSelectedButNotEnabled : + ///< TRUE - Display warning message of "AMP selected but not enabled" + ///< FALSE - No corresponding message should be displayed + ///< + ///< Note that both of warning message status reports are controlled by AmpWarningMsgEnable + ///< + OUT AMP_DIMM_VOLTAGE AmpVoltage; ///< AMP voltage which will be sent back to platform BIOS, and + ///< the value in AmpVoltage is valid only if AmpStatus is TRUE returned + IN BOOLEAN DataEyeEn; ///< Get 2D training data eye + ///< TRUE = Enable to get the 2D data eye + ///< FALSE = The 2D data eye is not enabled + ///< @BldCfgItem{BLDCFG_ENABLE_DATA_EYE} + IN BOOLEAN DramDoubleRefreshRate;///< Specify the average time between refresh requests to all DRAM devices. + ///< TRUE = 2x refresh rate. + ///< FALSE = 1x refresh rate. + ///< @BldCfgItem{BLDCFG_DRAM_DOUBLE_REFRESH_RATE} + IN PMU_TRAIN_MODE PmuTrainMode; ///< PMU Training Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + ///< 0 = PMU 1D Training only for all configurations + ///< 1 = PMU 1D and 2D Training read only for all configurations + ///< 2 = PMU 1D and 2D Training for all configurations + ///< 3 = AGESA control type of training depend on configurations +} MEM_PARAMETER_STRUCT; + + +/// +/// Function definition. +/// This data structure passes function pointers to the memory configuration code. +/// The wrapper can use this structure with customized versions. +/// +typedef struct _MEM_FUNCTION_STRUCT { + + // PUBLIC required Internal functions + + IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData); ///< Proc for Unbuffered DIMMs, platform specific + IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData); ///< Proc for Registered DIMMs, platform specific + + // PUBLIC optional functions + + IN OUT VOID (*amdMemEccInit) (VOID *pMemData); ///< NB proc for ECC feature + IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature + IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData); ///< NB proc for Channel interleave feature + IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData); ///< NB proc for Node interleave feature + IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData); ///< NB proc for parallel training feature + IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData); ///< NB code for early sample support feature + IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData); ///< NB code for 'multi-part' + IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData); ///< NB code for On-Line Spare feature + IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData); ///< NB code for UDIMMs + IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData); ///< NB code for RDIMMs + IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData); ///< NB code for LRDIMMs + IN OUT UINT32 Reserved[100]; ///< Reserved for later function definition +} MEM_FUNCTION_STRUCT; + +/// +/// Socket Structure +/// +/// +typedef struct _MEM_SOCKET_STRUCT { + OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels training data + + OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels timing data +} MEM_SOCKET_STRUCT; + +/// +/// Contains all data relevant to Memory Initialization. +/// +typedef struct _MEM_DATA_STRUCT { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + + IN MEM_PARAMETER_STRUCT *ParameterListPtr; ///< List of input Parameters + + OUT MEM_FUNCTION_STRUCT FunctionList; ///< List of function Pointers + + IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info + + IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling + + + OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED]; ///< Socket list for memory code. + ///< SocketList is a shortcut for IBVs to retrieve training + ///< and timing data for each channel indexed by socket/channel, + ///< eliminating their need to parse die/dct/channel etc. + ///< It contains pointers to the populated data structures for + ///< each channel and skips the channel structures that are + ///< unpopulated. In the case of channels sharing the same DCT, + ///< the pTimings pointers will point to the same DCT Timing data. + + OUT DIE_STRUCT *DiesPerSystem; ///< Pointed to an array of DIE_STRUCTs + OUT UINT8 DieCount; ///< Number of MCTs in the system. + + IN SPD_DEF_STRUCT *SpdDataStructure; ///< Pointer to SPD Data structure + + IN OUT struct _PLATFORM_CONFIGURATION *PlatFormConfig; ///< Platform profile/build option config structure + + IN OUT BOOLEAN IsFlowControlSupported; ///< Indicates if flow control is supported + + OUT UINT32 TscRate; ///< The rate at which the TSC increments in megahertz. + IN BOOLEAN PhyReceiverLowPower; ///< Force PHY receiver in low power. + ///< TRUE = PHY receiver low power + ///< FALSE = PHY receiver high power +} MEM_DATA_STRUCT; + +/// +/// Uma Structure +/// +/// +typedef struct _UMA_INFO { + OUT UINT64 UmaBase; ///< UmaBase[63:0] = Addr[63:0] + OUT UINT32 UmaSize; ///< UmaSize[31:0] = Addr[31:0] + OUT UINT32 UmaAttributes; ///< Indicate the attribute of Uma + OUT UINT8 UmaMode; ///< Indicate the mode of Uma + OUT UINT16 MemClock; ///< Indicate memory running speed in MHz + OUT UINT8 MemType; ///< Indicate the DRAM technology type that is being used + OUT UINT8 Reserved[2]; ///< Reserved for future usage +} UMA_INFO; + + +/// Bitfield for ID +typedef struct { + OUT UINT16 SocketId:8; ///< Socket ID + OUT UINT16 ModuleId:8; ///< Module ID +} ID_FIELD; +/// +/// Union for ID of socket and module that will be passed out in call out +/// +typedef union { + OUT ID_FIELD IdField; ///< Bitfield for ID + OUT UINT16 IdInformation; ///< ID information for call out +} ID_INFO; + +// AGESA MEMORY ERRORS + +// AGESA_SUCCESS memory events +#define MEM_EVENT_CAPSULE_IN_EFFECT 0x04013600ul ///< Capsule is in effect +#define MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT 0x04023600ul ///< Context restore is in effect + +// AGESA_ALERT Memory Errors +#define MEM_ALERT_USER_TMG_MODE_OVERRULED 0x04010000ul ///< TIMING_MODE_SPECIFIC is requested but + ///< cannot be applied to current configurations. +#define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100ul ///< DIMM organization miss-match +#define MEM_ALERT_BK_INT_DIS 0x04010200ul ///< Bank interleaving disable for internal issue + +// AGESA_ERROR Memory Errors +#define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300ul ///< No DQS Position window for RD DQS +#define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300ul ///< Small DQS Position window for RD DQS +#define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300ul ///< No DQS Position window for WR DQS +#define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300ul ///< Small DQS Position window for WR DQS +#define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500ul ///< DIMM sparing has not been enabled for an internal issues +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300ul ///< Receive Enable value is too large +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300ul ///< There is no DQS receiver enable window +#define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600ul ///< Time out when polling DramEnabled bit +#define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700ul ///< Time out when polling DctAccessDone bit +#define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800ul ///< Time out when polling SendCtrlWord bit +#define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900ul ///< Time out when polling PrefDramTrainMode bit +#define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00ul ///< Time out when polling EnterSelfRef bit +#define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00ul ///< Time out when polling FreqChgInProg bit +#define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00ul ///< Time out when polling ExitSelfRef bit +#define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00ul ///< Time out when polling SendMrsCmd bit +#define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00ul ///< Time out when polling SendZQCmd bit +#define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00ul ///< Time out when polling DctExtraAccessDone bit +#define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00ul ///< Time out when polling MemClrBusy bit +#define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00ul ///< Time out when polling MemCleared bit +#define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000ul ///< Time out when polling FlushWr bit +#define MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT 0x04012600ul ///< Time out when polling CurNBPstate bit +#define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300ul ///< Fail to find pass during Max Rd Latency training +#define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300ul ///< Fail to launch training code on an AP +#define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300ul ///< Fail to finish parallel training +#define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100ul ///< No address mapping found for a dimm +#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT 0x040A0300ul ///< There is no DQS receiver enable window and the value is equal to the largest value +#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300ul ///< Receive Enable value is too large and is 1 less than limit +#define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR 0x04011200ul ///< SPD Checksum error for NV_SPDCHK_RESTRT +#define MEM_ERROR_NO_CHIPSELECT 0x04011300ul ///< No chipselects found +#define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500ul ///< Unbuffered dimm is not supported at 333MHz +#define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300ul ///< Returned PRE value during write levelizzation was out of range +#define MEM_ERROR_NO_2D_RDDQS_WINDOW 0x040D0300ul ///< No 2D RdDqs Window +#define MEM_ERROR_NO_2D_RDDQS_HEIGHT 0x040E0300ul ///< No 2D RdDqs Height +#define MEM_ERROR_2D_DQS_ERROR 0x040F0300ul ///< 2d RdDqs Error +#define MEM_ERROR_INVALID_2D_RDDQS_VALUE 0x04022400ul ///< 2d RdDqs invalid value found +#define MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR 0x04023400ul ///< 2d RdDqs Vef Margin error found +#define MEM_ERROR_LR_IBT_NOT_FOUND 0x04013500ul ///< No LR dimm IBT value is found +#define MEM_ERROR_MR0_NOT_FOUND 0x04023500ul ///< No MR0 value is found +#define MEM_ERROR_ODT_PATTERN_NOT_FOUND 0x04033500ul ///< No odt pattern value is found +#define MEM_ERROR_RC2_IBT_NOT_FOUND 0x04043500ul ///< No RC2 IBT value is found +#define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND 0x04053500ul ///< No RC10 op speed is found +#define MEM_ERROR_RTT_NOT_FOUND 0x04063500ul ///< No RTT value is found +#define MEM_ERROR_P2D_NOT_FOUND 0x04073500ul ///< No 2D training config value is found +#define MEM_ERROR_SAO_NOT_FOUND 0x04083500ul ///< No slow access mode, Address timing and Output driver compensation value is found +#define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND 0x04093500ul ///< No CLK disable map is found +#define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND 0x040A3500ul ///< No CKE tristate map is found +#define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND 0x040B3500ul ///< No ODT tristate map is found +#define MEM_ERROR_CS_TRI_MAP_NOT_FOUND 0x040C3500ul ///< No CS tristate map is found +#define MEM_ERROR_TRAINING_SEED_NOT_FOUND 0x040D3500ul ///< No training seed is found +#define MEM_ERROR_NO_2D_WRDAT_WINDOW 0x040D0400ul ///< No 2D WrDat Window +#define MEM_ERROR_NO_2D_WRDAT_HEIGHT 0x040E0400ul ///< No 2D WrDat Height +#define MEM_ERROR_2D_WRDAT_ERROR 0x040F0400ul ///< 2d WrDat Error +#define MEM_ERROR_INVALID_2D_WRDAT_VALUE 0x04100400ul ///< 2d WrDat invalid value found +#define MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR 0x04110400ul ///< 2d WrDat Vef Margin error found +#define MEM_ERROR_PMU_TRAINING 0x04120400ul ///< Fail PMU training. + +// AGESA_WARNING Memory Errors +#define MEM_WARNING_UNSUPPORTED_QRDIMM 0x04011600ul ///< QR DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_UDIMM 0x04021600ul ///< U DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_SODIMM 0x04031600ul ///< SO-DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_X4DIMM 0x04041600ul ///< x4 DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_RDIMM 0x04051600ul ///< R DIMMs detected but not supported +#define MEM_WARNING_UNSUPPORTED_LRDIMM 0x04061600ul ///< LR DIMMs detected but not supported +#define MEM_WARNING_EMP_NOT_SUPPORTED 0x04011700ul ///< Processor is not capable for EMP +#define MEM_WARNING_EMP_CONFLICT 0x04021700ul ///< EMP cannot be enabled if channel interleaving, +#define MEM_WARNING_EMP_NOT_ENABLED 0x04031700ul ///< Memory size is not power of two. +#define MEM_WARNING_ECC_DIS 0x04041700ul ///< ECC has been disabled as a result of an internal issue +#define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800ul ///< Performance has been enabled, but battery life is preferred. + ///< bank interleaving, or bank swizzle is enabled. +#define MEM_WARNING_NO_SPDTRC_FOUND 0x04011900ul ///< No Trc timing value found in SPD of a dimm. +#define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000ul ///< Node Interleaveing Requested, but could not be enabled +#define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100ul ///< Channel Interleaveing Requested, but could not be enabled +#define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200ul ///< Bank Interleaveing Requested, but could not be enabled +#define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300ul ///< Voltage 1.35 determined, but could not be supported +#define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO 0x04012400ul ///< DDR3 voltage initial value is not 0 +#define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO 0x04012500ul ///< Cannot find a commonly supported VDDIO +#define MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED 0x04012900ul ///< AMP support detected but not enabled +#define MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED 0x04022900ul ///< AMP selected but not enabled + +// AGESA_FATAL Memory Errors +#define MEM_ERROR_MINIMUM_MODE 0x04011A00ul ///< Running in minimum mode +#define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00ul ///< DIMM modules are miss-matched +#define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00ul ///< No DIMMs have been found +#define MEM_ERROR_MISMATCH_DIMM_CLOCKS 0x04011D00ul ///< DIMM clocks miss-matched +#define MEM_ERROR_NO_CYC_TIME 0x04011E00ul ///< No cycle time found +#define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS 0x04011F00ul ///< Heap allocation error with dynamic storing of trained timings +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs 0x04021F00ul ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT +#define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV 0x04031F00ul ///< Heap allocation error with REMOTE_TRAINING_ENV +#define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD 0x04041F00ul ///< Heap allocation error for SPD data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA 0x04051F00ul ///< Heap allocation error for RECEIVED_DATA during parallel training +#define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS 0x04061F00ul ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER" +#define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA 0x04071F00ul ///< Heap allocation error for Training Data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK 0x04081F00ul ///< Heap allocation error for DIMM Identify "MEM_NB_BLOCK +#define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM 0x04022300ul ///< No Constructor for DIMM Identify +#define MEM_ERROR_VDDIO_UNSUPPORTED 0x04022500ul ///< VDDIO of the dimms on the board is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_2D 0x040B1F00ul ///< Heap allocation error for 2D training data +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_2D 0x040C1F00ul ///< Heap de-allocation error for 2D training data +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE 0x040F1F00ul ///< Heap allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE 0x040E1F00ul ///< Heap de-allocation error for DATAEYE Storage +#define MEM_ERROR_HEAP_ALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04101F00ul ///< Heap allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_DEALLOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04111F00ul ///< Heap de-allocation error for PMU SRAM Message Block Storage +#define MEM_ERROR_HEAP_LOCATE_FOR_PMU_SRAM_MSG_BLOCK 0x04121F00ul ///< Heap location error for PMU SRAM Message Block Storage + +// AGESA_CRITICAL Memory Errors +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 0x04091F00ul ///< Heap allocation error for DMI table for DDR3 +#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 0x040A1F00ul ///< Heap allocation error for DMI table for DDR2 +#define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG 0x04011400ul ///< Dimm population is not supported +#define MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY 0x040D1F00ul ///< Heap allocation error for CRAT memory affinity info + + + +/*---------------------------------------------------------------------------- + * + * END OF MEMORY-SPECIFIC DATA STRUCTURES + * + *---------------------------------------------------------------------------- + */ + + + + +/*---------------------------------------------------------------------------- + * + * CPU RELATED DEFINITIONS + * + *---------------------------------------------------------------------------- + */ + +// CPU Event definitions. + +// Defines used to filter CPU events based on functional blocks +#define CPU_EVENT_PM_EVENT_MASK 0xFF00FF00ul +#define CPU_EVENT_PM_EVENT_CLASS 0x08000400ul + +//================================================================ +// CPU General events +// Heap allocation (AppFunction = 01h) +#define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT 0x08000100ul +#define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED 0x08010100ul +#define CPU_ERROR_HEAP_IS_FULL 0x08020100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED 0x08030100ul +#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT 0x08040100ul +// BrandId (AppFunction = 02h) +#define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE 0x08000200ul +// Micro code patch (AppFunction = 03h) +#define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED 0x08000300ul +// Power management (AppFunction = 04h) +#define CPU_EVENT_PM_PSTATE_OVERCURRENT 0x08000400ul +#define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT 0x08010400ul +#define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE 0x08020400ul +#define CPU_ERROR_PM_NB_PSTATE_MISMATCH 0x08030400ul +#define CPU_ERROR_PM_ALL_PSTATE_OVER_FREQUENCY_LIMIT 0x08040400ul +#define CPU_EVENT_PM_PSTATE_FREQUENCY_LIMIT 0x08050400ul +// Other CPU events (AppFunction = 05h) +#define CPU_EVENT_BIST_ERROR 0x08000500ul +#define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY 0x08010500ul +#define CPU_EVENT_STACK_REENTRY 0x08020500ul +#define CPU_EVENT_CORE_NOT_IDENTIFIED 0x08030500ul + +//================================================================= +// CPU Feature events +// Execution cache (AppFunction = 21h) +// AGESA_CACHE_SIZE_REDUCED 2101 +// AGESA_CACHE_REGIONS_ACROSS_1MB 2102 +// AGESA_CACHE_REGIONS_ACROSS_4GB 2103 +// AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 +// AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 +// AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 +// AGESA_DEALLOCATE_CACHE_REGIONS 2107 +#define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR 0x08002100ul +// Core Leveling (AppFunction = 22h) +#define CPU_WARNING_ADJUSTED_LEVELING_MODE 0x08002200ul +// SCS initialization (AppFunction = 24h) +// AGESA_SCS_HEAP_ENTRY_MISSING 2401 +// AGESA_SCS_BUFFER_EMPTY 2402 +// AGESA_SCS_WEIGHTS_MISMATCH 2403 +#define CPU_EVENT_SCS_INITIALIZATION_ERROR 0x08002400ul + +// CPU Build Configuration structures and definitions + +/// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS +typedef struct { + IN UINT32 MsrAddr; ///< Fixed-Sized MTRR address + IN UINT64 MsrData; ///< MTRR Settings +} AP_MTRR_SETTINGS; + +#define AMD_AP_MTRR_FIX64k_00000 0x00000250ul +#define AMD_AP_MTRR_FIX16k_80000 0x00000258ul +#define AMD_AP_MTRR_FIX16k_A0000 0x00000259ul +#define AMD_AP_MTRR_FIX4k_C0000 0x00000268ul +#define AMD_AP_MTRR_FIX4k_C8000 0x00000269ul +#define AMD_AP_MTRR_FIX4k_D0000 0x0000026Aul +#define AMD_AP_MTRR_FIX4k_D8000 0x0000026Bul +#define AMD_AP_MTRR_FIX4k_E0000 0x0000026Cul +#define AMD_AP_MTRR_FIX4k_E8000 0x0000026Dul +#define AMD_AP_MTRR_FIX4k_F0000 0x0000026Eul +#define AMD_AP_MTRR_FIX4k_F8000 0x0000026Ful +#define CPU_LIST_TERMINAL 0xFFFFFFFFul + +/// Data structure for the Mapping Item between Unified ID for IDS Setup Option +/// and the option value. +/// +typedef struct { + IN UINT16 IdsNvId; ///< Unified ID for IDS Setup Option. + OUT UINT16 IdsNvValue; ///< The value of IDS Setup Option. +} IDS_NV_ITEM; + +/// Data Structure for IDS CallOut Function +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN IDS_NV_ITEM *IdsNvPtr; ///< Memory Pointer of IDS NV Table + IN OUT UINTN Reserved; ///< reserved +} IDS_CALLOUT_STRUCT; + +/// Data Structure for Connected Standby Function +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN VOID *CsRestoreTable; ///< Pointer to the CsRestoreTable + IN UINT32 CsRestoreTableSize; ///< Size in bytes of the CsRestoreTable +} CS_CALLOUT_STRUCT; + +/************************************************************************ + * + * AGESA interface Call-Out function parameter structures + * + ***********************************************************************/ + +/// Parameters structure for interface call-out AgesaAllocateBuffer +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT UINT32 BufferLength; ///< Size of buffer to allocate + IN UINT32 BufferHandle; ///< Identifier or name for the buffer + OUT VOID *BufferPointer; ///< location of the created buffer +} AGESA_BUFFER_PARAMS; + +/// Parameters structure for interface call-out AgesaHeapRebase +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINTN HeapAddress; ///< The address which heap content will be temporarily stored in +} AGESA_REBASE_PARAMS; + +/// Parameters structure for interface call-out AgesaRunCodeOnAp +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT32 FunctionNumber; ///< Index of the procedure to execute + IN VOID *RelatedDataBlock; ///< Location of data structure the procedure will use + IN UINT32 RelatedBlockLength; ///< Size of the related data block +} AP_EXE_PARAMS; + +/// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 SocketId; ///< Address of SPD - socket ID + IN UINT8 MemChannelId; ///< Address of SPD - memory channel ID + IN UINT8 DimmId; ///< Address of SPD - DIMM ID + IN OUT UINT8 *Buffer; ///< Location where to place the SPD content + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference +} AGESA_READ_SPD_PARAMS; + +/// VoltageType values +typedef enum { + VTYPE_CPU_VREF, ///< Cpu side Vref + VTYPE_DIMM_VREF, ///< Dimm Side Vref + VTYPE_VDDIO ///< Vddio +} VTYPE; + +/// Parameters structure for the interface call-out AgesaExternalVoltageAdjust +typedef struct _VOLTAGE_ADJUST { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference + IN VTYPE VoltageType; ///< Which Voltage Type to adjust + IN INT8 AdjustValue; ///< Positive/Negative Adjust Value +} VOLTAGE_ADJUST; + +/// Buffer Handles +typedef enum { + AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000, ///< Assign 0x000D000 buffer handle to DMI function + AMD_PSTATE_DATA_BUFFER_HANDLE, ///< Assign 0x000D001 buffer handle to Pstate data + AMD_PSTATE_ACPI_BUFFER_HANDLE, ///< Assign 0x000D002 buffer handle to Pstate table + AMD_BRAND_ID_BUFFER_HANDLE, ///< Assign 0x000D003 buffer handle to Brand ID + AMD_ACPI_SLIT_BUFFER_HANDLE, ///< Assign 0x000D004 buffer handle to SLIT function + AMD_SRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D005 buffer handle to SRAT function + AMD_WHEA_BUFFER_HANDLE, ///< Assign 0x000D006 buffer handle to WHEA function + AMD_S3_INFO_BUFFER_HANDLE, ///< Assign 0x000D007 buffer handle to S3 function + AMD_S3_NB_INFO_BUFFER_HANDLE, ///< Assign 0x000D008 buffer handle to S3 NB device info + AMD_ACPI_ALIB_BUFFER_HANDLE, ///< Assign 0x000D009 buffer handle to ALIB SSDT table + AMD_ACPI_IVRS_BUFFER_HANDLE, ///< Assign 0x000D00A buffer handle to IOMMU IVRS table + AMD_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D00B buffer handle to CRAT function + AMD_ACPI_CDIT_BUFFER_HANDLE ///< Assign 0x000D00C buffer handle to CDIT function +} AMD_BUFFER_HANDLE; + + +/************************************************************************ + * + * AGESA interface Call-Out function prototypes + * + ***********************************************************************/ + +VOID +AgesaDoReset ( + IN UINTN ResetType, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +AgesaAllocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *AllocParams + ); + +AGESA_STATUS +AgesaDeallocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *DeallocParams + ); + +AGESA_STATUS +AgesaLocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *LocateParams + ); + +AGESA_STATUS +AgesaHeapRebase ( + IN UINTN FcnData, + IN OUT AGESA_REBASE_PARAMS *RebaseParams + ); + +AGESA_STATUS +AgesaReadSpd ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaReadSpdRecovery ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ); + +AGESA_STATUS +AgesaHookBeforeDramInitRecovery ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaRunFcnOnAp ( + IN UINTN ApicIdOfCore, + IN AP_EXE_PARAMS *LaunchApParams + ); + +AGESA_STATUS +AgesaHookBeforeDramInit ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeDQSTraining ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaHookBeforeExitSelfRefresh ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaPcieSlotResetControl ( + IN UINTN FcnData, + IN PCIe_SLOT_RESET_INFO *ResetInfo + ); + +AGESA_STATUS +AgesaGetVbiosImage ( + IN UINTN FcnData, + IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo + ); + +AGESA_STATUS +AgesaFchOemCallout ( + IN VOID *FchData + ); + +AGESA_STATUS +AgesaExternal2dTrainVrefChange ( + IN UINTN SocketIdModuleId, + IN OUT MEM_DATA_STRUCT *MemData + ); + +AGESA_STATUS +AgesaGetIdsData ( + IN UINTN Data, + IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData + ); + +AGESA_STATUS +AgesaExternalVoltageAdjust ( + IN UINTN SocketIdModuleId, + IN OUT VOLTAGE_ADJUST *AdjustValue + ); + +AGESA_STATUS +AgesaPublishCsRestorationData ( + IN UINTN Reserved, + IN OUT CS_CALLOUT_STRUCT *AdjustValue + ); + +AGESA_STATUS +AgesaGnbOemCallout ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINTN FcnData, + IN OUT VOID *GnbCalloutData + ); + +/************************************************************************ + * + * AGESA interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Platform Configuration: The parameters in boot branch function + **********************************************************************/ + +/// The possible platform control flow settings. +typedef enum { + Nfcm, ///< Normal Flow Control Mode. + UmaDr, ///< UMA using Display Refresh flow control. + UmaIfcm, ///< UMA using Isochronous Flow Control. + Ifcm, ///< Isochronous Flow Control Mode (other than for UMA). + Iommu, ///< An IOMMU is in use in the system. + MaxControlFlow ///< Not a control flow mode, use for limit checking. +} PLATFORM_CONTROL_FLOW; + +/// The possible hardware prefetch mode settings. +typedef enum { + HARDWARE_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. + DISABLE_L1_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above. + DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER + DISABLE_L2_STRIDE_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above + DISABLE_HARDWARE_PREFETCH, ///< Disable hardware prefetching. + MAX_HARDWARE_PREFETCH_MODE ///< Not a hardware prefetch mode, use for limit checking. +} HARDWARE_PREFETCH_MODE; + +/// The possible software prefetch mode settings. +typedef enum { + SOFTWARE_PREFETCHES_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. + DISABLE_SOFTWARE_PREFETCHES, ///< Disable software prefetches (convert software prefetch instructions to NOP). + MAX_SOFTWARE_PREFETCH_MODE ///< Not a software prefetch mode, use for limit checking. +} SOFTWARE_PREFETCH_MODE; + +/// Advanced performance tunings, prefetchers. +/// These settings provide for performance tuning to optimize for specific workloads. +typedef struct { + IN HARDWARE_PREFETCH_MODE HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting. + IN SOFTWARE_PREFETCH_MODE SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions. + IN DRAM_PREFETCH_MODE DramPrefetchMode; ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. +} ADVANCED_PERFORMANCE_PROFILE; + +/// The possible platform power policy settings. +typedef enum { + Performance, ///< Optimize for performance. + BatteryLife, ///< Optimize for battery life. + MaxPowerPolicy ///< Not a power policy mode, use for limit checking. +} PLATFORM_POWER_POLICY; + +/// Platform performance settings for optimized settings. +/// Several configuration settings for the processor depend upon other parts and +/// general designer choices for the system. The determination of these data points +/// is not standard for all platforms, so the host environment needs to provide these +/// to specify how the system is to be configured. +typedef struct { + IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; ///< The platform's control flow mode for optimum platform performance. + ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE} + IN BOOLEAN Use32ByteRefresh; ///< Display Refresh traffic generates 32 byte requests. + ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH} + IN BOOLEAN UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority. + ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY} + IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile; ///< The advanced platform performance settings. + IN PLATFORM_POWER_POLICY PlatformPowerPolicy; ///< The platform's desired power policy + ///< @BldCfgItem{BLDCFG_PLATFORM_POWER_POLICY_MODE} + IN BOOLEAN NbPstatesSupported; ///< The Nb-Pstates is supported or not + ///< @BldCfgItem{BLDCFG_NB_PSTATES_SUPPORTED} +} PERFORMANCE_PROFILE; + +/// Platform settings that describe the voltage regulator modules of the system. +/// Many power management settings are dependent upon the characteristics of the +/// on-board voltage regulator module (VRM). The host environment needs to provide +/// these to specify how the system is to be configured. +typedef struct { + IN UINT32 CurrentLimit; ///< Vrm Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT} + IN UINT32 LowPowerThreshold; ///< Vrm Low Power Threshold. + ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD} + ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD} + IN UINT32 SlewRate; ///< Vrm Slew Rate. + ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE} + ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE} + IN BOOLEAN HiSpeedEnable; ///< Select high speed VRM. + ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE} + ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE} + IN UINT32 MaximumCurrentLimit; ///< Vrm Maximum Current Limit. + ///< @BldCfgItem{BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT} + ///< @BldCfgItem{BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT} + IN UINT32 SviOcpLevel; ///< SVI OCP Level. + ///< @BldCfgItem{BLDCFG_VRM_SVI_OCP_LEVEL} + ///< @BldCfgItem{BLDCFG_VRM_NB_SVI_OCP_LEVEL} +} PLATFORM_VRM_CONFIGURATION; + +/// The VRM types to characterize. +typedef enum { + CoreVrm, ///< VDD plane. + NbVrm, ///< VDDNB plane. + MaxVrmType ///< Not a valid VRM type, use for limit checking. +} PLATFORM_VRM_TYPE; + + +/// FCH Platform Configuration Policy +typedef struct { + IN UINT16 CfgSmbus0BaseAddress; ///< SMBUS0 Controller Base Address + IN UINT16 CfgSmbus1BaseAddress; ///< SMBUS1 Controller Base Address + IN UINT16 CfgSioPmeBaseAddress; ///< I/O base address for LPC I/O target range + IN UINT16 CfgAcpiPm1EvtBlkAddr; ///< I/O base address of ACPI power management Event Block + IN UINT16 CfgAcpiPm1CntBlkAddr; ///< I/O base address of ACPI power management Control Block + IN UINT16 CfgAcpiPmTmrBlkAddr; ///< I/O base address of ACPI power management Timer Block + IN UINT16 CfgCpuControlBlkAddr; ///< I/O base address of ACPI power management CPU Control Block + IN UINT16 CfgAcpiGpe0BlkAddr; ///< I/O base address of ACPI power management General Purpose Event Block + IN UINT16 CfgSmiCmdPortAddr; ///< I/O base address of ACPI SMI Command Block + IN UINT16 CfgAcpiPmaCntBlkAddr; ///< I/O base address of ACPI power management additional control block + IN UINT32 CfgGecShadowRomBase; ///< 32-bit base address to the GEC shadow ROM + IN UINT32 CfgWatchDogTimerBase; ///< Watchdog Timer base address + IN UINT32 CfgSpiRomBaseAddress; ///< Base address for the SPI ROM controller + IN UINT32 CfgHpetBaseAddress; ///< HPET MMIO base address + IN UINT32 CfgAzaliaSsid; ///< Subsystem ID of HD Audio controller + IN UINT32 CfgSmbusSsid; ///< Subsystem ID of SMBUS controller + IN UINT32 CfgIdeSsid; ///< Subsystem ID of IDE controller + IN UINT32 CfgSataAhciSsid; ///< Subsystem ID of SATA controller in AHCI mode + IN UINT32 CfgSataIdeSsid; ///< Subsystem ID of SATA controller in IDE mode + IN UINT32 CfgSataRaid5Ssid; ///< Subsystem ID of SATA controller in RAID5 mode + IN UINT32 CfgSataRaidSsid; ///< Subsystem ID of SATA controller in RAID mode + IN UINT32 CfgEhciSsid; ///< Subsystem ID of EHCI + IN UINT32 CfgOhciSsid; ///< Subsystem ID of OHCI + IN UINT32 CfgLpcSsid; ///< Subsystem ID of LPC ISA Bridge + IN UINT32 CfgSdSsid; ///< Subsystem ID of SecureDigital controller + IN UINT32 CfgXhciSsid; ///< Subsystem ID of XHCI + IN BOOLEAN CfgFchPort80BehindPcib; ///< Is port80 cycle going to the PCI bridge + IN BOOLEAN CfgFchEnableAcpiSleepTrap; ///< ACPI sleep SMI enable/disable + IN GPP_LINKMODE CfgFchGppLinkConfig; ///< GPP link configuration + IN BOOLEAN CfgFchGppPort0Present; ///< Is FCH GPP port 0 present + IN BOOLEAN CfgFchGppPort1Present; ///< Is FCH GPP port 1 present + IN BOOLEAN CfgFchGppPort2Present; ///< Is FCH GPP port 2 present + IN BOOLEAN CfgFchGppPort3Present; ///< Is FCH GPP port 3 present + IN BOOLEAN CfgFchGppPort0HotPlug; ///< Is FCH GPP port 0 hotplug capable + IN BOOLEAN CfgFchGppPort1HotPlug; ///< Is FCH GPP port 1 hotplug capable + IN BOOLEAN CfgFchGppPort2HotPlug; ///< Is FCH GPP port 2 hotplug capable + IN BOOLEAN CfgFchGppPort3HotPlug; ///< Is FCH GPP port 3 hotplug capable + + IN UINT8 CfgFchEsataPortBitMap; ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable + IN UINT8 CfgFchIrPinControl; ///< Register bitfield describing Infrared Pin Control: + ///< [0] - IR Enable 0 + ///< [1] - IR Enable 1 + ///< [2] - IR Tx0 + ///< [3] - IR Tx1 + ///< [4] - IR Open Drain + ///< [5] - IR Enable LED + IN SD_CLOCK_CONTROL CfgFchSdClockControl; ///< FCH SD Clock Control + IN SCI_MAP_CONTROL *CfgFchSciMapControl; ///< FCH SCI Mapping Control + IN SATA_PHY_CONTROL *CfgFchSataPhyControl; ///< FCH SATA PHY Control + IN GPIO_CONTROL *CfgFchGpioControl; ///< FCH GPIO Control + IN BOOLEAN CfgFchRtcWorkAround; ///< FCH RTC Workaround + IN BOOLEAN CfgFchUsbPortDisWorkAround; ///< FCH USB Workaround +} FCH_PLATFORM_POLICY; + + +/// Build Option/Configuration Boolean Structure. +typedef struct { + IN AMD_CODE_HEADER VersionString; ///< AMD embedded code version string + + //Build Option Area + IN BOOLEAN OptionUDimms; ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT" + IN BOOLEAN OptionRDimms; ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT" + IN BOOLEAN OptionLrDimms; ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT" + IN BOOLEAN OptionEcc; ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT" + IN BOOLEAN OptionBankInterleave; ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE" + IN BOOLEAN OptionDctInterleave; ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE" + IN BOOLEAN OptionNodeInterleave; ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE" + IN BOOLEAN OptionParallelTraining; ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING" + IN BOOLEAN OptionOnlineSpare; ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT" + IN BOOLEAN OptionMemRestore; ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT" + IN BOOLEAN OptionMultisocket; ///< @ref BLDOPT_REMOVE_MULTISOCKET_SUPPORT "BLDOPT_REMOVE_MULTISOCKET_SUPPORT" + IN BOOLEAN OptionAcpiPstates; ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES" + IN BOOLEAN OptionCrat; ///< @ref BLDOPT_REMOVE_CRAT "BLDOPT_REMOVE_CRAT" + IN BOOLEAN OptionCdit; ///< @ref BLDOPT_REMOVE_CDIT "BLDOPT_REMOVE_CDIT" + IN BOOLEAN OptionSrat; ///< @ref BLDOPT_REMOVE_SRAT "BLDOPT_REMOVE_SRAT" + IN BOOLEAN OptionSlit; ///< @ref BLDOPT_REMOVE_SLIT "BLDOPT_REMOVE_SLIT" + IN BOOLEAN OptionWhea; ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA" + IN BOOLEAN OptionDmi; ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI" + IN BOOLEAN OptionEarlySamples; ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES" + IN BOOLEAN OptionAddrToCsTranslator; ///< ADDR_TO_CS_TRANSLATOR + + //Build Configuration Area + IN UINT64 CfgPciMmioAddress; ///< Pci Mmio Base Address to use for PCI Config accesses. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE} + IN UINT32 CfgPciMmioSize; ///< Pci Mmio region Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE} + IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN UINT32 CfgCpuFrequencyLimit; ///< CPU frequency limit + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< Enable or disable connected standby + IN UINT32 CfgPlatNumIoApics; ///< The number of IO APICS for the platform. + IN UINT32 CfgMemInitPstate; ///< Memory Init Pstate. + IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used. + IN UINT32 CfgPlatformCStateOpData; ///< An IO port or additional C-State setup data, depends on C-State mode. + IN UINT16 CfgPlatformCStateIoBaseAddress; ///< Specifies I/O ports that can be used to allow CPU to enter CStates + IN PLATFORM_CPB_MODES CfgPlatformCpbMode; ///< Enable or disable core performance boost + IN PLATFORM_LOW_POWER_PSTATE_MODES CfgLowPowerPstateForProcHot; ///< Low power Pstate for PROCHOT mode + IN UINT32 CfgCoreLevelingMode; ///< Apply any downcoring or core count leveling as specified. + IN PERFORMANCE_PROFILE CfgPerformanceProfile; ///< The platform's control flow mode and platform performance settings. + + IN UINT32 CfgAmdPlatformType; ///< Designate the platform as a Server, Desktop, or Mobile. + IN UINT32 CfgAmdPowerCeiling; ///< PowerCeiling, specifies a maximum power usage limit for the platform + IN UINT16 CfgHtcTemperatureLimit; ///< Hardware Thermal Control temperature limit in tenths of degrees Celsius. + IN UINT16 CfgLhtcTemperatureLimit; ///< Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + + IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT} + IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED} + IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE} + IN UINT32 CfgMemoryQuadrankType; ///< Memory Quadrank Type. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE} + IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable. + IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable. + IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable. + IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE} + IN BOOLEAN CfgLimitMemoryToBelow1Tb; ///< Limit memory address space to below 1TB + IN BOOLEAN CfgMemoryEnableBankInterleaving; ///< Memory Enable Bank Interleaving. + IN BOOLEAN CfgMemoryEnableNodeInterleaving; ///< Memory Enable Node Interleaving. + IN BOOLEAN CfgMemoryChannelInterleaving; ///< Memory Channel Interleaving. + IN BOOLEAN CfgMemoryPowerDown; ///< Memory Power Down. + IN UINT32 CfgPowerDownMode; ///< Power Down Mode. + IN BOOLEAN CfgOnlineSpare; ///< Online Spare. + IN BOOLEAN CfgMemoryParityEnable; ///< Memory Parity Enable. + IN BOOLEAN CfgBankSwizzle; ///< Bank Swizzle. + IN UINT32 CfgTimingModeSelect; ///< Timing Mode Select. + IN UINT32 CfgMemoryClockSelect; ///< Memory Clock Select. + IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL} + IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM} + IN BOOLEAN CfgUseBurstMode; ///< Use Burst Mode. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE} + IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON} + IN BOOLEAN CfgDdrPhyDllBypassMode; ///< Enable DllPDBypassMode + IN BOOLEAN CfgEnableEccFeature; ///< Enable ECC Feature. + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION} + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE} + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE} + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE} + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE} + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE} + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD} + IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE} + IN UINT64 CfgHeapDramAddress; ///< Heap contents will be temporarily stored in this address during the transition. + ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS} + IN BOOLEAN CfgNodeMem1GBAlign; ///< Node Mem 1GB boundary Alignment + IN BOOLEAN CfgS3LateRestore; ///< S3 Late Restore + IN BOOLEAN CfgAcpiPstateIndependent; ///< PSD method dependent/Independent + IN UINT32 CfgAcpiPstatesPsdPolicy; ///< PSD policy + IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList; ///< The AP's MTRR settings before final halt + ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST} + IN UMA_MODE CfgUmaMode; ///< Uma Mode + IN UINT32 CfgUmaSize; ///< Uma Size [31:0]=Addr[47:16] + IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support + IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment + IN BOOLEAN CfgProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + IN CHAR8 CfgProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + IN CHAR8 CfgProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + IN UINT8 CfgGnbHdAudio; ///< GNB HD Audio + IN UINT8 CfgAbmSupport; ///< Abm Support + IN UINT8 CfgDynamicRefreshRate; ///< DRR Dynamic Refresh Rate + IN UINT16 CfgLcdBackLightControl; ///< LCD Backlight Control + IN UINT8 CfgGnb3dStereoPinIndex; ///< 3D Stereo Pin ID. + IN UINT32 CfgTempPcieMmioBaseAddress; ///< Temp pcie MMIO base Address + ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS} + IN UINT32 CfgGnbIGPUSSID; ///< Gnb internal GPU SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID} + IN UINT32 CfgGnbHDAudioSSID; ///< Gnb HD Audio SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID} + IN UINT32 CfgGnbPcieSSID; ///< Gnb PCIe SSID + ///< Build-time customizable only - @BldCfgItem{BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID} + IN UINT16 CfgLvdsSpreadSpectrum; ///< Lvds Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} + IN UINT16 CfgLvdsSpreadSpectrumRate; ///< Lvds Spread Spectrum Rate + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} + IN FCH_PLATFORM_POLICY *FchBldCfg; ///< FCH platform build configuration policy + + IN BOOLEAN CfgIommuSupport; ///< IOMMU support + IN UINT8 CfgLvdsPowerOnSeqDigonToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqDeToDigon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing + IN UINT8 CfgLvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing + IN UINT16 CfgLvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported + IN UINT32 CfgLcdBitDepthControlValue; ///< The LCD bit depth control settings + IN UINT8 CfgLvds24bbpPanelMode; ///< The LVDS 24 BBP mode + IN LVDS_MISC_CONTROL CfgLvdsMiscControl; ///< THe LVDS Misc control + IN UINT16 CfgPcieRefClkSpreadSpectrum; ///< PCIe Reference Clock Spread Spectrum + ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} + IN BOOLEAN CfgExternalVrefCtlFeature; ///< External Vref control + IN FORCE_TRAIN_MODE CfgForceTrainMode; ///< Force Train Mode + IN BOOLEAN CfgGnbRemoteDisplaySupport; ///< Wireless Display Support + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList; + IN BOOLEAN CfgGnbSyncFloodPinAsNmi; ///< @ref BLDCFG_USE_SYNCFLOOD_AS_NMI "BLDCFG_USE_SYNCFLOOD_AS_NMI" + IN UINT8 CfgIgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy + ///< @li 0 = Auto - use current default + ///< @li 2 = Disable iGPU if ANY PCI or PCIe Graphics card is present + ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} + IN UINT8 CfgGnbSwTjOffset; ///< Software-writeable TjOffset to account for changes in junction temperature + ///< Build-time customizable only - @BldCfgItem{BLDCFG_GNB_THERMAL_SENSOR_CORRECTION} + IN UINT8 CfgLvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage + ///< Build-time customizable only - @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} + IN DISPLAY_MISC_CONTROL CfgDisplayMiscControl; ///< The Display Misc control + IN DP_FIXED_VOLT_SWING_TYPE CfgDpFixedVoltSwingType;///< To indicate fixed voltage swing value + ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} + IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable + ///< when it is mixed with other technology types. + IN BOOLEAN CfgHybridBoostEnable; ///< HyBrid Boost support + ///< @BldCfgItem{BLDCFG_HYBRID_BOOST_ENABLE} + IN UINT64 CfgGnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) + ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} + IN BOOLEAN CfgDataEyeEn; ///< Enable get 2D Data Eye + IN BOOLEAN CfgDockedTdpHeadroom; ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} + IN BOOLEAN CfgBatteryBoostEn; ///< @BldCfgItem{BLDCFG_BATTERY_BOOST_EN} + IN UINT32 CfgBatteryBoostTune; ///< @BldCfgItem{BLDCFG_BATTERY_BOOST_TUNE} + IN UINT32 CfgNumGfxCoresEnabled; ///< @BldCfgItem{BLDCFG_NUM_GFX_CORES_ENABLED} + IN UINT32 CfgTdpAcDocked; ///< @BldCfgItem{BLDCFG_TDP_AC_DOCKED} + IN UINT32 CfgTdpDcDocked; ///< @BldCfgItem{BLDCFG_TDP_DC_DOCKED} + IN UINT32 CfgTdpAcUnDocked; ///< @BldCfgItem{BLDCFG_TDP_AC_UNDOCKED} + IN UINT32 CfgTdpDcUnDocked; ///< @BldCfgItem{BLDCFG_TDP_DC_UNDOCKED} + IN UINT32 CfgTspAcDocked; ///< @BldCfgItem{BLDCFG_TSP_AC_DOCKED} + IN UINT32 CfgTspDcDocked; ///< @BldCfgItem{BLDCFG_TSP_DC_DOCKED} + IN UINT32 CfgTspAcUnDocked; ///< @BldCfgItem{BLDCFG_TSP_AC_UNDOCKED} + IN UINT32 CfgTspDcUnDocked; ///< @BldCfgItem{BLDCFG_TSP_DC_UNDOCKED} + IN BOOLEAN CfgStapmEnAcDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_AC_DOCKED} + IN BOOLEAN CfgStapmEnDcDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_DC_DOCKED} + IN BOOLEAN CfgStapmEnAcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_AC_UNDOCKED} + IN BOOLEAN CfgStapmEnDcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_EN_DC_UNDOCKED} + IN UINT32 CfgStapmPowerAcDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_AC_DOCKED} + IN UINT32 CfgStapmPowerDcDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_DC_DOCKED} + IN UINT32 CfgStapmPowerAcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_AC_UNDOCKED} + IN UINT32 CfgStapmPowerDcUnDocked; ///< @BldCfgItem{BLDCFG_STAPM_POWER_DC_UNDOCKED} + IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate + IN ACP_SIZE CfgGnbAcpSize; ///< ACP size [31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} + IN PMU_TRAIN_MODE CfgPmuTrainMode; ///< Force Train Mode + ///< @BldCfgItem{BLDCFG_PMU_TRAINING_MODE} + IN MEMORY_PHY_VOLTAGE CfgMemoryPhyVoltage; ///< Memory Phy voltage (VDDR) + ///< @BldCfgItem{BLDCFG_MEMORY_PHY_VOLTAGE} + IN UINT32 CfgGpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_GPU_FREQUENCY_LIMIT} + IN UINT8 CfgMaxNumAudioEndpoints; ///< @BldCfgItem{BLDCFG_MAX_NUM_AUDIO_ENDPOINTS} + IN BOOLEAN Reserved; ///< reserved... +} BUILD_OPT_CFG; + +/// A structure containing platform specific operational characteristics. This +/// structure is initially populated by the initializer with a copy of the same +/// structure that was created at build time using the build configuration controls. +typedef struct _PLATFORM_CONFIGURATION { + IN PERFORMANCE_PROFILE PlatformProfile; ///< Several configuration settings for the processor. + IN UINT8 CoreLevelingMode; ///< Indicates how to balance the number of cores per processor. + ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE} + IN PLATFORM_CSTATE_MODES CStateMode; ///< Specifies the method of C-State enablement - Disabled, or C6. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE} + IN UINT32 CStatePlatformData; ///< This element specifies some pertinent data needed for the operation of the Cstate feature + ///< If CStateMode is CStateModeC6, this item is reserved + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA} + IN UINT16 CStateIoBaseAddress; ///< This item specifies a free block of 8 consecutive bytes of I/O ports that + ///< can be used to allow the CPU to enter Cstates. + ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS} + IN PLATFORM_CPB_MODES CpbMode; ///< Specifies the method of core performance boost enablement - Disabled, or Auto. + ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE} + IN BOOLEAN UserOptionDmi; ///< When set to TRUE, the DMI data table is generated. + IN BOOLEAN UserOptionPState; ///< When set to TRUE, the PState data tables are generated. + IN BOOLEAN UserOptionCrat; ///< When set to TRUE, the CRAT data table is generated. + IN BOOLEAN UserOptionCdit; ///< When set to TRUE, the CDIT data table is generated. + IN BOOLEAN UserOptionSrat; ///< When set to TRUE, the SRAT data table is generated. + IN BOOLEAN UserOptionSlit; ///< When set to TRUE, the SLIT data table is generated. + IN BOOLEAN UserOptionWhea; ///< When set to TRUE, the WHEA data table is generated. + IN PLATFORM_LOW_POWER_PSTATE_MODES LowPowerPstateForProcHot; ///< Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. + IN UINT32 PowerCeiling; ///< P-State Ceiling Enabling Deck - Max power milli-watts. + IN BOOLEAN ForcePstateIndependent; ///< Deprecated in favor of PstatesPsdPolicy. + ///< P-State _PSD is forced independent. + ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT} + IN UINT32 PstatesPsdPolicy; ///< PSD policy + ///< @BldCfgItem{BLDCFG_ACPI_PSTATES_PSD_POLICY} + IN UINT32 CpuFrequencyLimit; ///< @BldCfgItem{BLDCFG_CPU_FREQUENCY_LIMIT} + IN PLATFORM_CONNECTED_STANDBY_MODES CfgPlatformConnectedStandbyMode; ///< @BldCfgItem{BLDCFG_CPU_CONNECTED_STANDBY_MODE} + IN UINT32 NumberOfIoApics; ///< Number of I/O APICs in the system + ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS} + IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. + IN BOOLEAN ProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB} + IN CHAR8 ProcessorScopeName0; ///< OEM specific 1st character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0} + IN CHAR8 ProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. + ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1} + IN UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output), + ///< essentially it enables function 1 of graphics device. + ///< @li 0 = HD Audio disable + ///< @li 1 = HD Audio enable + ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO} + IN UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is + ///< characteristic specific to display panel which used by platform design. + ///< @li 0 = ABM support disabled + ///< @li 1 = ABM support enabled + ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT} + IN UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP. + ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE} + IN UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control. + ///< If equal to 0 backlight not controlled by iGPU + ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL} + IN UINT16 HtcTemperatureLimit; ///< The Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_HTC_TEMPERATURE_LIMIT} + IN UINT16 LhtcTemperatureLimit; ///< The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. + ///< If equal to 0, use hardware defaults. + ///< @BldCfgItem{BLDCFG_LHTC_TEMPERATURE_LIMIT} + IN ACP_SIZE AcpSize; ///< The size of ACP dram + ///< ACP_Size[31:0]=Addr[47:16] + ///< @BldCfgItem{BLDCFG_ACP_SIZE} +} PLATFORM_CONFIGURATION; + + +/********************************************************************** + * Structures for: AmdInitLate + **********************************************************************/ +#define PROC_VERSION_LENGTH 48 +#define MAX_DIMMS_PER_SOCKET 16 +#define PROC_MANU_LENGTH 29 + +/* Interface Parameter Structures */ +/// DMI Type4 - Processor ID +typedef struct { + OUT UINT32 ProcIdLsd; ///< Lower half of 64b ID + OUT UINT32 ProcIdMsd; ///< Upper half of 64b ID +} TYPE4_PROC_ID; + +/// DMI Type 4 - Processor information +typedef struct { + OUT UINT8 T4ProcType; ///< CPU Type + OUT UINT8 T4ProcFamily; ///< Family 1 + OUT TYPE4_PROC_ID T4ProcId; ///< Id + OUT UINT8 T4Voltage; ///< Voltage + OUT UINT16 T4ExternalClock; ///< External clock + OUT UINT16 T4MaxSpeed; ///< Max speed + OUT UINT16 T4CurrentSpeed; ///< Current speed + OUT UINT8 T4Status; ///< Status + OUT UINT8 T4ProcUpgrade; ///< Up grade + OUT UINT8 T4CoreCount; ///< Core count + OUT UINT8 T4CoreEnabled; ///< Core Enable + OUT UINT8 T4ThreadCount; ///< Thread count + OUT UINT16 T4ProcCharacteristics; ///< Characteristics + OUT UINT16 T4ProcFamily2; ///< Family 2 + OUT CHAR8 T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version + OUT CHAR8 T4ProcManufacturer[PROC_MANU_LENGTH]; ///< Manufacturer +} TYPE4_DMI_INFO; + +/// DMI Type 7 - Cache information +typedef struct _TYPE7_DMI_INFO { + OUT UINT16 T7CacheCfg; ///< Cache cfg + OUT UINT16 T7MaxCacheSize; ///< Max size + OUT UINT16 T7InstallSize; ///< Install size + OUT UINT16 T7SupportedSramType; ///< Supported Sram Type + OUT UINT16 T7CurrentSramType; ///< Current type + OUT UINT8 T7CacheSpeed; ///< Speed + OUT UINT8 T7ErrorCorrectionType; ///< ECC type + OUT UINT8 T7SystemCacheType; ///< Cache type + OUT UINT8 T7Associativity; ///< Associativity +} TYPE7_DMI_INFO; + +/// DMI Type 16 offset 04h - Location +typedef enum { + OtherLocation = 0x01, ///< Assign 01 to Other + UnknownLocation, ///< Assign 02 to Unknown + SystemboardOrMotherboard, ///< Assign 03 to systemboard or motherboard + IsaAddonCard, ///< Assign 04 to ISA add-on card + EisaAddonCard, ///< Assign 05 to EISA add-on card + PciAddonCard, ///< Assign 06 to PCI add-on card + McaAddonCard, ///< Assign 07 to MCA add-on card + PcmciaAddonCard, ///< Assign 08 to PCMCIA add-on card + ProprietaryAddonCard, ///< Assign 09 to proprietary add-on card + NuBus, ///< Assign 0A to NuBus + Pc98C20AddonCard, ///< Assign 0A0 to PC-98/C20 add-on card + Pc98C24AddonCard, ///< Assign 0A1 to PC-98/C24 add-on card + Pc98EAddoncard, ///< Assign 0A2 to PC-98/E add-on card + Pc98LocalBusAddonCard ///< Assign 0A3 to PC-98/Local bus add-on card +} DMI_T16_LOCATION; + +/// DMI Type 16 offset 05h - Memory Error Correction +typedef enum { + OtherUse = 0x01, ///< Assign 01 to Other + UnknownUse, ///< Assign 02 to Unknown + SystemMemory, ///< Assign 03 to system memory + VideoMemory, ///< Assign 04 to video memory + FlashMemory, ///< Assign 05 to flash memory + NonvolatileRam, ///< Assign 06 to non-volatile RAM + CacheMemory ///< Assign 07 to cache memory +} DMI_T16_USE; + +/// DMI Type 16 offset 07h - Maximum Capacity +typedef enum { + Dmi16OtherErrCorrection = 0x01, ///< Assign 01 to Other + Dmi16UnknownErrCorrection, ///< Assign 02 to Unknown + Dmi16NoneErrCorrection, ///< Assign 03 to None + Dmi16Parity, ///< Assign 04 to parity + Dmi16SingleBitEcc, ///< Assign 05 to Single-bit ECC + Dmi16MultiBitEcc, ///< Assign 06 to Multi-bit ECC + Dmi16Crc ///< Assign 07 to CRC +} DMI_T16_ERROR_CORRECTION; + +/// DMI Type 16 - Physical Memory Array +typedef struct { + OUT DMI_T16_LOCATION Location; ///< The physical location of the Memory Array, + ///< whether on the system board or an add-in board. + OUT DMI_T16_USE Use; ///< Identifies the function for which the array + ///< is used. + OUT DMI_T16_ERROR_CORRECTION MemoryErrorCorrection; ///< The primary hardware error correction or + ///< detection method supported by this memory array. + OUT UINT16 NumberOfMemoryDevices; ///< The number of slots or sockets available + ///< for memory devices in this array. +} TYPE16_DMI_INFO; + +/// DMI Type 17 offset 0Eh - Form Factor +typedef enum { + OtherFormFactor = 0x01, ///< Assign 01 to Other + UnknowFormFactor, ///< Assign 02 to Unknown + SimmFormFactor, ///< Assign 03 to SIMM + SipFormFactor, ///< Assign 04 to SIP + ChipFormFactor, ///< Assign 05 to Chip + DipFormFactor, ///< Assign 06 to DIP + ZipFormFactor, ///< Assign 07 to ZIP + ProprietaryCardFormFactor, ///< Assign 08 to Proprietary Card + DimmFormFactorFormFactor, ///< Assign 09 to DIMM + TsopFormFactor, ///< Assign 10 to TSOP + RowOfChipsFormFactor, ///< Assign 11 to Row of chips + RimmFormFactor, ///< Assign 12 to RIMM + SodimmFormFactor, ///< Assign 13 to SODIMM + SrimmFormFactor, ///< Assign 14 to SRIMM + FbDimmFormFactor ///< Assign 15 to FB-DIMM +} DMI_T17_FORM_FACTOR; + +/// DMI Type 17 offset 12h - Memory Type +typedef enum { + OtherMemType = 0x01, ///< Assign 01 to Other + UnknownMemType, ///< Assign 02 to Unknown + DramMemType, ///< Assign 03 to DRAM + EdramMemType, ///< Assign 04 to EDRAM + VramMemType, ///< Assign 05 to VRAM + SramMemType, ///< Assign 06 to SRAM + RamMemType, ///< Assign 07 to RAM + RomMemType, ///< Assign 08 to ROM + FlashMemType, ///< Assign 09 to Flash + EepromMemType, ///< Assign 10 to EEPROM + FepromMemType, ///< Assign 11 to FEPROM + EpromMemType, ///< Assign 12 to EPROM + CdramMemType, ///< Assign 13 to CDRAM + ThreeDramMemType, ///< Assign 14 to 3DRAM + SdramMemType, ///< Assign 15 to SDRAM + SgramMemType, ///< Assign 16 to SGRAM + RdramMemType, ///< Assign 17 to RDRAM + DdrMemType, ///< Assign 18 to DDR + Ddr2MemType, ///< Assign 19 to DDR2 + Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM + Ddr3MemType = 0x18, ///< Assign 24 to DDR3 + Fbd2MemType ///< Assign 25 to FBD2 +} DMI_T17_MEMORY_TYPE; + +/// DMI Type 17 offset 13h - Type Detail +typedef struct { + OUT UINT16 Reserved1:1; ///< Reserved + OUT UINT16 Other:1; ///< Other + OUT UINT16 Unknown:1; ///< Unknown + OUT UINT16 FastPaged:1; ///< Fast-Paged + OUT UINT16 StaticColumn:1; ///< Static column + OUT UINT16 PseudoStatic:1; ///< Pseudo-static + OUT UINT16 Rambus:1; ///< RAMBUS + OUT UINT16 Synchronous:1; ///< Synchronous + OUT UINT16 Cmos:1; ///< CMOS + OUT UINT16 Edo:1; ///< EDO + OUT UINT16 WindowDram:1; ///< Window DRAM + OUT UINT16 CacheDram:1; ///< Cache Dram + OUT UINT16 NonVolatile:1; ///< Non-volatile + OUT UINT16 Registered:1; ///< Registered (Buffered) + OUT UINT16 Unbuffered:1; ///< Unbuffered (Unregistered) + OUT UINT16 Reserved2:1; ///< Reserved +} DMI_T17_TYPE_DETAIL; + +/// DMI Type 17 - Memory Device +typedef struct { + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceSet; ///< Identifies when the Memory Device is one of a set of + ///< Memory Devices that must be populated with all devices of + ///< the same type and size, and the set to which this device belongs. + OUT CHAR8 DeviceLocator[8]; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT CHAR8 BankLocator[10]; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT DMI_T17_MEMORY_TYPE MemoryType; ///< The type of memory used in this device. + OUT DMI_T17_TYPE_DETAIL TypeDetail; ///< Additional detail on the memory device type + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT CHAR8 SerialNumber[9]; ///< Serial Number. + OUT CHAR8 PartNumber[19]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed +} TYPE17_DMI_INFO; + +/// Memory DMI Type 17 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure + OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. + OUT UINT16 MemorySize; ///< The size of the memory device. + OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. + OUT UINT8 DeviceLocator; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + OUT UINT8 BankLocator; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). + OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. + OUT UINT8 SerialNumber[4]; ///< Serial Number. + OUT UINT8 PartNumber[18]; ///< Part Number. + OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. + OUT UINT32 ExtSize; ///< Extended Size. + OUT UINT16 ConfigSpeed; ///< Configured memory clock speed +} MEM_DMI_PHYSICAL_DIMM_INFO; + +/// Memory DMI Type 20 - for memory use +typedef struct { + OUT UINT8 Socket:3; ///< Socket ID + OUT UINT8 Channel:2; ///< Channel ID + OUT UINT8 Dimm:2; ///< DIMM ID + OUT UINT8 DimmPresent:1; ///< Dimm Present + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} MEM_DMI_LOGICAL_DIMM_INFO; + +/// DMI Type 19 - Memory Array Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, + ///< of a range of memory mapped to the + ///< specified physical memory array. + OUT UINT32 EndingAddr; ///< The physical ending address of the + ///< last kilobyte of a range of addresses + ///< mapped to the specified physical memory array. + OUT UINT16 MemoryArrayHandle; ///< The handle, or instance number, associated + ///< with the physical memory array to which this + ///< address range is mapped. + OUT UINT8 PartitionWidth; ///< Identifies the number of memory devices that + ///< form a single row of memory for the address + ///< partition defined by this structure. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. + OUT UINT64 ExtEndingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the specified Physical Memory Array. +} TYPE19_DMI_INFO; + +///DMI Type 20 - Memory Device Mapped Address +typedef struct { + OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range + ///< of memory mapped to the referenced Memory Device. + OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with + ///< the Memory Device structure to which this address + ///< range is mapped. + OUT UINT16 MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated + ///< with the Memory Array Mapped Address structure to + ///< which this device address range is mapped. + OUT UINT8 PartitionRowPosition; ///< Identifies the position of the referenced Memory + ///< Device in a row of the address partition. + OUT UINT8 InterleavePosition; ///< The position of the referenced Memory Device in + ///< an interleave. + OUT UINT8 InterleavedDataDepth; ///< The maximum number of consecutive rows from the + ///< referenced Memory Device that are accessed in a + ///< single interleaved transfer. + OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of + ///< memory mapped to the referenced Memory Device. + OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of + ///< a range of addresses mapped to the referenced Memory Device. +} TYPE20_DMI_INFO; + +/// Collection of pointers to the DMI records +typedef struct { + OUT TYPE4_DMI_INFO T4[MAX_SOCKETS_SUPPORTED]; ///< Type 4 struc + OUT TYPE7_DMI_INFO T7L1[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 1 + OUT TYPE7_DMI_INFO T7L2[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 2 + OUT TYPE7_DMI_INFO T7L3[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 3 + OUT TYPE16_DMI_INFO T16; ///< Type 16 struc + OUT TYPE17_DMI_INFO T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc + OUT TYPE19_DMI_INFO T19; ///< Type 19 struc + OUT TYPE20_DMI_INFO T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc +} DMI_INFO; + +/********************************************************************** + * Interface call: AllocateExecutionCache + **********************************************************************/ +#define MAX_CACHE_REGIONS 3 + +/// AllocateExecutionCache sub param structure for cached memory region +typedef struct { + IN OUT UINT32 ExeCacheStartAddr; ///< Start address + IN OUT UINT32 ExeCacheSize; ///< Size +} EXECUTION_CACHE_REGION; + +/********************************************************************** + * Interface call: AmdGetAvailableExeCacheSize + **********************************************************************/ +/// Get available Cache remain +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 AvailableExeCacheSize; ///< Remain size +} AMD_GET_EXE_SIZE_PARAMS; + +AGESA_STATUS +AmdGetAvailableExeCacheSize ( + IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams + ); + +/// Selection type for core leveling +typedef enum { + CORE_LEVEL_LOWEST, ///< Level to lowest common denominator + CORE_LEVEL_TWO, ///< Level to 2 cores + CORE_LEVEL_POWER_OF_TWO, ///< Level to 1,2,4 or 8 + CORE_LEVEL_NONE, ///< Do no leveling + CORE_LEVEL_COMPUTE_UNIT, ///< Level cores to one core per compute unit + CORE_LEVEL_COMPUTE_UNIT_TWO, ///< Level cores to two cores per compute unit + CORE_LEVEL_COMPUTE_UNIT_THREE, ///< Level cores to three cores per compute unit + CORE_LEVEL_ONE, ///< Level to 1 core + CORE_LEVEL_THREE, ///< Level to 3 cores + CORE_LEVEL_FOUR, ///< Level to 4 cores + CORE_LEVEL_FIVE, ///< Level to 5 cores + CORE_LEVEL_SIX, ///< Level to 6 cores + CORE_LEVEL_SEVEN, ///< Level to 7 cores + CORE_LEVEL_EIGHT, ///< Level to 8 cores + CORE_LEVEL_NINE, ///< Level to 9 cores + CORE_LEVEL_TEN, ///< Level to 10 cores + CORE_LEVEL_ELEVEN, ///< Level to 11 cores + CORE_LEVEL_TWELVE, ///< Level to 12 cores + CORE_LEVEL_THIRTEEN, ///< Level to 13 cores + CORE_LEVEL_FOURTEEN, ///< Level to 14 cores + CORE_LEVEL_FIFTEEN, ///< Level to 15 cores + CoreLevelModeMax ///< Used for bounds checking +} CORE_LEVELING_TYPE; + + + + + +/************************************************************************ + * + * AGESA Basic Level interface structure definition and function prototypes + * + ***********************************************************************/ + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ); + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +/// AmdInitReset param structure +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region + IN FCH_RESET_INTERFACE FchInterface; ///< Interface for FCH configuration +} AMD_RESET_PARAMS; + +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ); + + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +/// InitEarly param structure +/// +/// Provide defaults or customizations to each service performed in AmdInitEarly. +/// +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< Execution Map Interface + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_CONFIGURATION GnbConfig; ///< GNB configuration +} AMD_EARLY_PARAMS; + +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ); + + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +/// AmdInitPost param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN GNB_POST_CONFIGURATION GnbPostConfig; ///< GNB post param +} AMD_POST_PARAMS; + +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ); + + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +/// AmdInitEnv param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_ENV_CONFIGURATION GnbEnvConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_ENV_PARAMS; + +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ); + + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +/// AmdInitMid param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN GNB_MID_CONFIGURATION GnbMidConfiguration; ///< GNB configuration + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_MID_PARAMS; + +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ); + + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +/// AmdInitLate param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *IvrsExclusionRangeList; ///< Pointer to array of exclusion ranges + OUT DMI_INFO *DmiTable; ///< DMI Interface + OUT VOID *AcpiPState; ///< Acpi Pstate SSDT Table + OUT VOID *AcpiSrat; ///< SRAT Table + OUT VOID *AcpiSlit; ///< SLIT Table + OUT VOID *AcpiWheaMce; ///< WHEA MCE Table + OUT VOID *AcpiWheaCmc; ///< WHEA CMC Table + OUT VOID *AcpiAlib; ///< ACPI SSDT table with ALIB implementation + OUT VOID *AcpiIvrs; ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table + OUT VOID *AcpiCrat; ///< Component Resource Affinity Table table + OUT VOID *AcpiCdit; ///< Component Locality Distance Information table + IN GNB_LATE_CONFIGURATION GnbLateConfiguration; ///< GNB configuration +} AMD_LATE_PARAMS; + +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ); + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +/// CPU Recovery Parameters +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. +} AMD_CPU_RECOVERY_PARAMS; + +/// AmdInitRecovery param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param + IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region. And the max cache region is 3 + IN AMD_CPU_RECOVERY_PARAMS CpuRecoveryParams; ///< Params for CPU related recovery init. +} AMD_RECOVERY_PARAMS; + +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ); + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +/// AmdInitResume param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics + IN AMD_S3_PARAMS S3DataBlock; ///< Save state data +} AMD_RESUME_PARAMS; + +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ); + + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +/// AmdS3LateRestore param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + IN AMD_S3_PARAMS S3DataBlock; ///< Save state data +} AMD_S3LATE_PARAMS; + +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ); + + +/********************************************************************** + * Interface call: AmdS3Save + **********************************************************************/ +/// AmdS3Save param structure +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. + OUT AMD_S3_PARAMS S3DataBlock; ///< Standard header + IN FCH_INTERFACE FchInterface; ///< FCH configuration +} AMD_S3SAVE_PARAMS; + +AGESA_STATUS +AmdS3Save ( + IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams + ); + + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +/** + * Entry point for AP tasking. + */ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +); + +// +// General Services API +// + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +/// Request the APIC ID of a particular core. + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Core's Socket. + IN UINT8 Core; ///< The Core id. + OUT BOOLEAN IsPresent; ///< The Core is present, and ApicAddress is valid. + OUT UINT8 ApicAddress; ///< The Core's APIC ID. +} AMD_APIC_PARAMS; + +/** + * Get a specified Core's APIC ID. + */ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +); + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +/// Request the PCI Address of a Processor Module (that is, its Northbridge) + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT8 Socket; ///< The Processor's socket + IN UINT8 Module; ///< The Module in that Processor + OUT BOOLEAN IsPresent; ///< The Core is present, and PciAddress is valid. + OUT PCI_ADDR PciAddress; ///< The Processor's PCI Config Space address (Function 0, Register 0) +} AMD_GET_PCI_PARAMS; + +/** + * Get Processor Module's PCI Config Space address. + */ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +); + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +/// Request the identity (Socket, Module, Core) of the current Processor Core + +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT8 Socket; ///< The current Core's Socket + OUT UINT8 Module; ///< The current Core's Processor Module + OUT UINT8 Core; ///< The current Core's core id. +} AMD_IDENTIFY_PARAMS; + +/** + * "Who am I" for the current running core. + */ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +); + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +/// An Event Log Entry. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + OUT UINT32 EventClass; ///< The severity of this event, matches AGESA_STATUS. + OUT UINT32 EventInfo; ///< The unique event identifier, zero means "no event". + OUT UINT32 DataParam1; ///< Data specific to the Event. + OUT UINT32 DataParam2; ///< Data specific to the Event. + OUT UINT32 DataParam3; ///< Data specific to the Event. + OUT UINT32 DataParam4; ///< Data specific to the Event. +} EVENT_PARAMS; + +/** + * Read an Event from the Event Log. + */ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +); + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +/// Request the identity of dimm from system address + +typedef struct { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN UINT64 MemoryAddress; ///< System Address that needs to be translated to dimm identification. + OUT UINT8 SocketId; ///< The socket on which the targeted address locates. + OUT UINT8 MemChannelId; ///< The channel on which the targeted address locates. + OUT UINT8 DimmId; ///< The dimm on which the targeted address locates. + OUT UINT8 ChipSelect; ///< The chip select on which the targeted address locates. + OUT UINT8 Bank; ///< The Bank for which the error address resides + OUT UINT32 Row; ///< The Row for which the error address resides + OUT UINT16 Column; ///< The Column for which the error address resides +} AMD_IDENTIFY_DIMM; + +/** + * Get the dimm identification for the address. + */ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +); + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ); + +/// Request the 2D Data Eye Training Data +#define RD_DATAEYE 0 +#define WR_DATAEYE 1 + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +/// Request the training data eye on Socket, Channel, Dimm. + +typedef struct _AMD_GET_DATAEYE { + IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN OUT AMD_POST_PARAMS *PostParamsPtr; ///< Pointer to AMD_POST_PARAMS + IN UINT8 SocketId; ///< The socket number to get the 2D data eye + IN UINT8 MemChannelId; ///< The channel number to get the 2D data eye + IN UINT8 DimmId; ///< The dimm number to get the 2D data eye + IN UINT8 DataEyeType; ///< Get the 2D data eye on read or write training + OUT UINT8* DataEyeBuffer; ///< The buffer to stores the 2D data eye +} AMD_GET_DATAEYE; + +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ); + +#define AGESA_IDS_DFT_VAL 0xFFFF ///< Default value of every uninitlized NV item, the action for it will be ignored +#define AGESA_IDS_NV_END 0xFFFF ///< Flag specify end of option structure +/// WARNING: Don't change the comment below, it used as signature for script +/// AGESA IDS NV ID Definitions +typedef enum { + AGESA_IDS_EXT_ID_START = 0x0000,///< 0x0000 specify the start of external NV id + + AGESA_IDS_NV_UCODE, ///< 0x0001 Enable or disable microcode patching + + AGESA_IDS_NV_TARGET_PSTATE, ///< 0x0002 Set the P-state required to be activated + AGESA_IDS_NV_POSTPSTATE, ///< 0x0003 Set the P-state required to be activated through POST + + AGESA_IDS_NV_BANK_INTERLEAVE, ///< 0x0004 Enable or disable Bank Interleave + AGESA_IDS_NV_CHANNEL_INTERLEAVE, ///< 0x0005 Enable or disable Channel Interleave + AGESA_IDS_NV_NODE_INTERLEAVE, ///< 0x0006 Enable or disable Node Interleave + AGESA_IDS_NV_MEMHOLE, ///< 0x0007 Enables or disable memory hole + + AGESA_IDS_NV_SCRUB_REDIRECTION, ///< 0x0008 Enable or disable a write to dram with corrected data + AGESA_IDS_NV_DRAM_SCRUB, ///< 0x0009 Set the rate of background scrubbing for DRAM + AGESA_IDS_NV_DCACHE_SCRUB, ///< 0x000A Set the rate of background scrubbing for the DCache. + AGESA_IDS_NV_L2_SCRUB, ///< 0x000B Set the rate of background scrubbing for the L2 cache + AGESA_IDS_NV_L3_SCRUB, ///< 0x000C Set the rate of background scrubbing for the L3 cache + AGESA_IDS_NV_ICACHE_SCRUB, ///< 0x000D Set the rate of background scrubbing for the Icache + AGESA_IDS_NV_SYNC_ON_ECC_ERROR, ///< 0x000E Enable or disable the sync flood on un-correctable ECC error + AGESA_IDS_NV_ECC_SYMBOL_SIZE, ///< 0x000F Set ECC symbol size + + AGESA_IDS_NV_ALL_MEMCLKS, ///< 0x0010 Enable or disable all memory clocks enable + AGESA_IDS_NV_DCT_GANGING_MODE, ///< 0x0011 Set the Ganged mode + AGESA_IDS_NV_DRAM_BURST_LENGTH32, ///< 0x0012 Set the DRAM Burst Length 32 + AGESA_IDS_NV_MEMORY_POWER_DOWN, ///< 0x0013 Enable or disable Memory power down mode + AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE, ///< 0x0014 Set the Memory power down mode + AGESA_IDS_NV_DLL_SHUT_DOWN, ///< 0x0015 Enable or disable DLLShutdown + AGESA_IDS_NV_ONLINE_SPARE, ///< 0x0016 Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap + + AGESA_IDS_NV_HDTOUT, ///< 0x0017 Enable or disable HDTOUT feature + + AGESA_IDS_NV_GNBHDAUDIOEN, ///< 0x0018 Enable or disable GNB HD Audio + + AGESA_IDS_NV_CPB_EN, ///< 0x0019 Core Performance Boost + + AGESA_IDS_NV_HTC_EN, ///< 0x001A HTC Enable + AGESA_IDS_NV_HTC_OVERRIDE, ///< 0x001B HTC Override + AGESA_IDS_NV_HTC_PSTATE_LIMIT, ///< 0x001C HTC P-state limit select + AGESA_IDS_NV_HTC_TEMP_HYS, ///< 0x001D HTC Temperature Hysteresis + AGESA_IDS_NV_HTC_ACT_TEMP, ///< 0x001E HTC Activation Temp + + AGESA_IDS_NV_POWER_POLICY, ///< 0x001F Select Platform Power Policy + AGESA_IDS_NV_DRAMCON, ///< 0x0020 Specify the mode for controller initialization + AGESA_IDS_EXT_ID_END, ///< 0x0021 specify the end of external NV ID +} IDS_EX_NV_ID; + + +#define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1) + + +#endif // _AGESA_H_ diff --git a/src/vendorcode/amd/pi/00730F01/AMD.h b/src/vendorcode/amd/pi/00730F01/AMD.h new file mode 100644 index 0000000000..1b6fdb26e8 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/AMD.h @@ -0,0 +1,474 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + +#ifndef _AMD_H_ +#define _AMD_H_ + +#define Int16FromChar(a,b) (UINT16)((a) << 0 | (b) << 8) +#define Int32FromChar(a,b,c,d) (UINT32)((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24) +#define Int64FromChar(a,b,c,d,e,f,g,h) ((UINT64)(Int32FromChar(a,b,c,d)<<32) | (UINT64)Int32FromChar(e,f,g,h)) + +#define AGESA_REVISION "Arch2008" +#define AGESA_ID {'A', 'G', 'E', 'S', 'A', 0x00, 0x00, 0x00} + +// +// +// AGESA Types and Definitions +// +// +#define LAST_ENTRY 0xFFFFFFFFul +#define IMAGE_SIGNATURE Int32FromChar ('$', 'A', 'M', 'D') +#define MODULE_SIGNATURE Int32FromChar ('$', 'M', 'O', 'D') +#define IOCF8 0xCF8 +#define IOCFC 0xCFC + +/// The return status for all AGESA public services. +/// +/// Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK +/// will have log entries with more detail. +/// +typedef enum { + AGESA_SUCCESS = 0, ///< The service completed normally. Info may be logged. + AGESA_UNSUPPORTED, ///< The dispatcher or create struct had an unimplemented function requested. + ///< Not logged. + AGESA_BOUNDS_CHK, ///< A dynamic parameter was out of range and the service was not provided. + ///< Example, memory address not installed, heap buffer handle not found. + ///< Not Logged. + // AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. + AGESA_ALERT, ///< An observed condition, but no loss of function. See Log. + AGESA_WARNING, ///< Possible or minor loss of function. See Log. + AGESA_ERROR, ///< Significant loss of function, boot may be possible. See Log. + AGESA_CRITICAL, ///< Continue boot only to notify user. See Log. + AGESA_FATAL, ///< Halt booting. See Log, however Fatal errors pertaining to heap problems + ///< may not be able to reliably produce log events. + AgesaStatusMax ///< Not a status, for limit checking. +} AGESA_STATUS; + +/// For checking whether a status is at or above the mandatory log level. +#define AGESA_STATUS_LOG_LEVEL AGESA_ALERT + +/** + * Callout method to the host environment. + * + * Callout using a dispatch with appropriate thunk layer, which is determined by the host environment. + * + * @param[in] Function The specific callout function being invoked. + * @param[in] FcnData Function specific data item. + * @param[in,out] ConfigPtr Reference to Callout params. + */ +typedef AGESA_STATUS (*CALLOUT_ENTRY) ( + IN UINT32 Function, + IN UINTN FcnData, + IN OUT VOID *ConfigPtr + ); + +typedef AGESA_STATUS (*IMAGE_ENTRY) (VOID *ConfigPtr); +typedef AGESA_STATUS (*MODULE_ENTRY) (VOID *ConfigPtr); + +///This allocation type is used by the AmdCreateStruct entry point +typedef enum { + PreMemHeap = 0, ///< Create heap in cache. + PostMemDram, ///< Create heap in memory. + ByHost ///< Create heap by Host. +} ALLOCATION_METHOD; + +/// These width descriptors are used by the library function, and others, to specify the data size +typedef enum ACCESS_WIDTH { + AccessWidth8 = 1, ///< Access width is 8 bits. + AccessWidth16, ///< Access width is 16 bits. + AccessWidth32, ///< Access width is 32 bits. + AccessWidth64, ///< Access width is 64 bits. + + AccessS3SaveWidth8 = 0x81, ///< Save 8 bits data. + AccessS3SaveWidth16, ///< Save 16 bits data. + AccessS3SaveWidth32, ///< Save 32 bits data. + AccessS3SaveWidth64, ///< Save 64 bits data. +} ACCESS_WIDTH; + +/// AGESA struct name +typedef enum { + // AGESA BASIC FUNCTIONS + AMD_INIT_RECOVERY = 0x00021000, ///< AmdInitRecovery entry point handle + AMD_CREATE_STRUCT = 0x00022000, ///< AmdCreateStruct handle + AMD_INIT_EARLY = 0x00023000, ///< AmdInitEarly entry point handle + AMD_INIT_ENV = 0x00024000, ///< AmdInitEnv entry point handle + AMD_INIT_LATE = 0x00025000, ///< AmdInitLate entry point handle + AMD_INIT_MID = 0x00026000, ///< AmdInitMid entry point handle + AMD_INIT_POST = 0x00027000, ///< AmdInitPost entry point handle + AMD_INIT_RESET = 0x00028000, ///< AmdInitReset entry point handle + AMD_INIT_RESUME = 0x00029000, ///< AmdInitResume entry point handle + AMD_RELEASE_STRUCT = 0x0002A000, ///< AmdReleaseStruct handle + AMD_S3LATE_RESTORE = 0x0002B000, ///< AmdS3LateRestore entry point handle + AMD_S3_SAVE = 0x0002C000, ///< AmdS3Save entry point handle + AMD_GET_APIC_ID = 0x0002D000, ///< AmdGetApicId entry point handle + AMD_GET_PCI_ADDRESS = 0x0002E000, ///< AmdGetPciAddress entry point handle + AMD_IDENTIFY_CORE = 0x0002F000, ///< AmdIdentifyCore general service handle + AMD_READ_EVENT_LOG = 0x00030000, ///< AmdReadEventLog general service handle + AMD_GET_EXECACHE_SIZE = 0x00031000, ///< AmdGetAvailableExeCacheSize general service handle + AMD_LATE_RUN_AP_TASK = 0x00032000, ///< AmdLateRunApTask entry point handle + AMD_IDENTIFY_DIMMS = 0x00033000, ///< AmdIdentifyDimm general service handle + AMD_GET_2D_DATA_EYE = 0x00034000, ///< AmdGet2DDataEye general service handle + AMD_HEAP_ALLOCATE_BUFFER = 0x00038000, + AMD_HEAP_DEALLOCATE_BUFFER = 0x00039000, + FCH_INIT_RESET = 0x00040000, + FCH_INIT_ENV = 0x00041000, + FCH_INIT_MID = 0x00042000, + FCH_INIT_LATE = 0x00043000, + FCH_INIT_S3_EARLY_RESTORE = 0x00044000, + FCH_INIT_S3_LATE_RESTORE = 0x00045000, + AMD_SET_VALUE = 0x00081000, + AMD_GET_VALUE = 0x00082000, +} AGESA_STRUCT_NAME; + + /* ResetType constant values */ +#define WARM_RESET_WHENEVER 1 +#define COLD_RESET_WHENEVER 2 +#define WARM_RESET_IMMEDIATELY 3 +#define COLD_RESET_IMMEDIATELY 4 + + +// AGESA Structures + +/// The standard header for all AGESA services. +/// For internal AGESA naming conventions, see @ref amdconfigparamname . +typedef struct { + IN VOID * ImageBasePtr; ///< The AGESA Image base address. + IN UINT32 Func; ///< The service desired + IN VOID * AltImageBasePtr; ///< Alternate Image location + IN CALLOUT_ENTRY CalloutPtr; ///< For Callout from AGESA + IN UINT8 HeapStatus; ///< For heap status from boot time slide. + IN UINT64 HeapBasePtr; ///< Location of the heap + IN OUT UINT8 Reserved[7]; ///< This space is reserved for future use. +} AMD_CONFIG_PARAMS; + + +/// Create Struct Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_STRUCT_NAME AgesaFunctionName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< How to handle buffer allocation + IN OUT UINT32 NewStructSize; ///< The size of the allocated data, in for ByHost, else out only. + IN OUT VOID *NewStructPtr; ///< The struct for the service. + ///< The struct to init for ByHost allocation, + ///< the initialized struct on return. +} AMD_INTERFACE_PARAMS; + +#define FUNC_0 0 // bit-placed for PCI address creation +#define FUNC_1 1 +#define FUNC_2 2 +#define FUNC_3 3 +#define FUNC_4 4 +#define FUNC_5 5 +#define FUNC_6 6 +#define FUNC_7 7 + +/// AGESA Binary module header structure +typedef struct { + IN UINT32 Signature; ///< Binary Signature + IN CHAR8 CreatorID[8]; ///< 8 characters ID + IN CHAR8 Version[12]; ///< 12 characters version + IN UINT32 ModuleInfoOffset; ///< Offset of module + IN UINT32 EntryPointAddress; ///< Entry address + IN UINT32 ImageBase; ///< Image base + IN UINT32 RelocTableOffset; ///< Relocate Table offset + IN UINT32 ImageSize; ///< Size + IN UINT16 Checksum; ///< Checksum + IN UINT8 ImageType; ///< Type + IN UINT8 V_Reserved; ///< Reserved +} AMD_IMAGE_HEADER; + +/// AGESA Binary module header structure +typedef struct _AMD_MODULE_HEADER { + IN UINT32 ModuleHeaderSignature; ///< Module signature + IN CHAR8 ModuleIdentifier[8]; ///< 8 characters ID + IN CHAR8 ModuleVersion[12]; ///< 12 characters version + IN VOID *ModuleDispatcher; ///< A pointer point to dispatcher + IN struct _AMD_MODULE_HEADER *NextBlock; ///< Next module header link +} AMD_MODULE_HEADER; + +// AMD_CODE_HEADER Signatures. +#define AGESA_CODE_SIGNATURE {'!', '!', '!', 'A', 'G', 'E', 'S', 'A'} +#define CIMXNB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'} +#define CIMXSB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'} + +/// AGESA_CODE_SIGNATURE +typedef struct { + IN CHAR8 Signature[8]; ///< code header Signature + IN CHAR8 ComponentName[16]; ///< 16 character name of the code module + IN CHAR8 Version[12]; ///< 12 character version string + IN CHAR8 TerminatorNull; ///< null terminated string + IN CHAR8 VerReserved[7]; ///< reserved space +} AMD_CODE_HEADER; + +/// Extended PCI address format +typedef struct { + IN OUT UINT32 Register:12; ///< Register offset + IN OUT UINT32 Function:3; ///< Function number + IN OUT UINT32 Device:5; ///< Device number + IN OUT UINT32 Bus:8; ///< Bus number + IN OUT UINT32 Segment:4; ///< Segment +} EXT_PCI_ADDR; + +/// Union type for PCI address +typedef union _PCI_ADDR { + IN UINT32 AddressValue; ///< Formal address + IN EXT_PCI_ADDR Address; ///< Extended address +} PCI_ADDR; + +// SBDFO - Segment Bus Device Function Offset +// 31:28 Segment (4-bits) +// 27:20 Bus (8-bits) +// 19:15 Device (5-bits) +// 14:12 Function(3-bits) +// 11:00 Offset (12-bits) + +#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \ + (((UINT32)(Dev)) << 15) | (((UINT32)(Fun)) << 12) | ((UINT32)(Off))) +#define ILLEGAL_SBDFO 0xFFFFFFFFul + +/// CPUID data received registers format +typedef struct { + OUT UINT32 EAX_Reg; ///< CPUID instruction result in EAX + OUT UINT32 EBX_Reg; ///< CPUID instruction result in EBX + OUT UINT32 ECX_Reg; ///< CPUID instruction result in ECX + OUT UINT32 EDX_Reg; ///< CPUID instruction result in EDX +} CPUID_DATA; + +// Topology Services definitions and macros +#define TOPOLOGY_LIST_TERMINAL 0xFF ///< End of list. + + +#ifndef BIT0 + #define BIT0 0x0000000000000001ull +#endif +#ifndef BIT1 + #define BIT1 0x0000000000000002ull +#endif +#ifndef BIT2 + #define BIT2 0x0000000000000004ull +#endif +#ifndef BIT3 + #define BIT3 0x0000000000000008ull +#endif +#ifndef BIT4 + #define BIT4 0x0000000000000010ull +#endif +#ifndef BIT5 + #define BIT5 0x0000000000000020ull +#endif +#ifndef BIT6 + #define BIT6 0x0000000000000040ull +#endif +#ifndef BIT7 + #define BIT7 0x0000000000000080ull +#endif +#ifndef BIT8 + #define BIT8 0x0000000000000100ull +#endif +#ifndef BIT9 + #define BIT9 0x0000000000000200ull +#endif +#ifndef BIT10 + #define BIT10 0x0000000000000400ull +#endif +#ifndef BIT11 + #define BIT11 0x0000000000000800ull +#endif +#ifndef BIT12 + #define BIT12 0x0000000000001000ull +#endif +#ifndef BIT13 + #define BIT13 0x0000000000002000ull +#endif +#ifndef BIT14 + #define BIT14 0x0000000000004000ull +#endif +#ifndef BIT15 + #define BIT15 0x0000000000008000ull +#endif +#ifndef BIT16 + #define BIT16 0x0000000000010000ull +#endif +#ifndef BIT17 + #define BIT17 0x0000000000020000ull +#endif +#ifndef BIT18 + #define BIT18 0x0000000000040000ull +#endif +#ifndef BIT19 + #define BIT19 0x0000000000080000ull +#endif +#ifndef BIT20 + #define BIT20 0x0000000000100000ull +#endif +#ifndef BIT21 + #define BIT21 0x0000000000200000ull +#endif +#ifndef BIT22 + #define BIT22 0x0000000000400000ull +#endif +#ifndef BIT23 + #define BIT23 0x0000000000800000ull +#endif +#ifndef BIT24 + #define BIT24 0x0000000001000000ull +#endif +#ifndef BIT25 + #define BIT25 0x0000000002000000ull +#endif +#ifndef BIT26 + #define BIT26 0x0000000004000000ull +#endif +#ifndef BIT27 + #define BIT27 0x0000000008000000ull +#endif +#ifndef BIT28 + #define BIT28 0x0000000010000000ull +#endif +#ifndef BIT29 + #define BIT29 0x0000000020000000ull +#endif +#ifndef BIT30 + #define BIT30 0x0000000040000000ull +#endif +#ifndef BIT31 + #define BIT31 0x0000000080000000ull +#endif +#ifndef BIT32 + #define BIT32 0x0000000100000000ull +#endif +#ifndef BIT33 + #define BIT33 0x0000000200000000ull +#endif +#ifndef BIT34 + #define BIT34 0x0000000400000000ull +#endif +#ifndef BIT35 + #define BIT35 0x0000000800000000ull +#endif +#ifndef BIT36 + #define BIT36 0x0000001000000000ull +#endif +#ifndef BIT37 + #define BIT37 0x0000002000000000ull +#endif +#ifndef BIT38 + #define BIT38 0x0000004000000000ull +#endif +#ifndef BIT39 + #define BIT39 0x0000008000000000ull +#endif +#ifndef BIT40 + #define BIT40 0x0000010000000000ull +#endif +#ifndef BIT41 + #define BIT41 0x0000020000000000ull +#endif +#ifndef BIT42 + #define BIT42 0x0000040000000000ull +#endif +#ifndef BIT43 + #define BIT43 0x0000080000000000ull +#endif +#ifndef BIT44 + #define BIT44 0x0000100000000000ull +#endif +#ifndef BIT45 + #define BIT45 0x0000200000000000ull +#endif +#ifndef BIT46 + #define BIT46 0x0000400000000000ull +#endif +#ifndef BIT47 + #define BIT47 0x0000800000000000ull +#endif +#ifndef BIT48 + #define BIT48 0x0001000000000000ull +#endif +#ifndef BIT49 + #define BIT49 0x0002000000000000ull +#endif +#ifndef BIT50 + #define BIT50 0x0004000000000000ull +#endif +#ifndef BIT51 + #define BIT51 0x0008000000000000ull +#endif +#ifndef BIT52 + #define BIT52 0x0010000000000000ull +#endif +#ifndef BIT53 + #define BIT53 0x0020000000000000ull +#endif +#ifndef BIT54 + #define BIT54 0x0040000000000000ull +#endif +#ifndef BIT55 + #define BIT55 0x0080000000000000ull +#endif +#ifndef BIT56 + #define BIT56 0x0100000000000000ull +#endif +#ifndef BIT57 + #define BIT57 0x0200000000000000ull +#endif +#ifndef BIT58 + #define BIT58 0x0400000000000000ull +#endif +#ifndef BIT59 + #define BIT59 0x0800000000000000ull +#endif +#ifndef BIT60 + #define BIT60 0x1000000000000000ull +#endif +#ifndef BIT61 + #define BIT61 0x2000000000000000ull +#endif +#ifndef BIT62 + #define BIT62 0x4000000000000000ull +#endif +#ifndef BIT63 + #define BIT63 0x8000000000000000ull +#endif + +#endif // _AMD_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Dispatcher.h b/src/vendorcode/amd/pi/00730F01/Dispatcher.h new file mode 100644 index 0000000000..eecdd0eebf --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Dispatcher.h @@ -0,0 +1,51 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Pushhigh Interface + * + * Contains interface to Pushhigh entry + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Legacy + * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * *************************************************************************** + */ + +#ifndef _DISPATCHER_H_ +#define _DISPATCHER_H_ + +// AGESA function prototypes +AGESA_STATUS CALLCONV AmdAgesaDispatcher ( IN OUT VOID *ConfigPtr ); +AGESA_STATUS CALLCONV AmdAgesaCallout ( IN UINT32 Func, IN UINT32 Data, IN OUT VOID *ConfigPtr ); + +#endif // _DISPATCHER_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Include/Filecode.h b/src/vendorcode/amd/pi/00730F01/Include/Filecode.h new file mode 100644 index 0000000000..c2893a74c3 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/Filecode.h @@ -0,0 +1,823 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Collectively assign unique filecodes for assert and debug to each source file. + * + * Publish values for decorated filenames, which can be used for + * ASSERT and debug support using a preprocessor define like: + * @n <tt> \#define FILECODE MY_C_FILENAME_FILECODE </tt> @n + * This file serves as a reference for debugging to associate the code and filename. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 282320 $ @e \$Date: 2014-01-09 20:13:34 -0600 (Thu, 09 Jan 2014) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FILECODE_H_ +#define _FILECODE_H_ + +#define UNASSIGNED_FILE_FILECODE (0xFFFF) + +/// For debug use in any Platform's options C file. +/// Can be reused for platforms and image builds, since only one options file can be built. +#define PLATFORM_SPECIFIC_OPTIONS_FILECODE (0xBBBB) + + +#define PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE (0xA001) +#define PROC_GNB_GNBINITATEARLY_FILECODE (0xA017) +#define PROC_GNB_GNBINITATENV_FILECODE (0xA020) +#define PROC_GNB_GNBINITATLATE_FILECODE (0xA021) +#define PROC_GNB_GNBINITATMID_FILECODE (0xA022) +#define PROC_GNB_GNBINITATPOST_FILECODE (0xA023) +#define PROC_GNB_GNBINITATRESET_FILECODE (0xA024) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE (0xA025) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE (0xA026) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE (0xA027) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE (0xA028) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE (0xA029) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE (0xA02A) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE (0xA030) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE (0xA031) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE (0xA032) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXPOWERPLAYTABLE_FILECODE (0xA033) +#define PROC_GNB_MODULES_GNBNBINITLIBV1_GNBNBINITLIBV1_FILECODE (0xA034) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE (0xA036) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE (0xA037) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE (0xA038) +#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE (0xA039) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE (0xA03B) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMEXITLATENCY_FILECODE (0xA03C) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPHYSERVICES_FILECODE (0xA03D) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE (0xA03E) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE (0xA03F) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE (0xA041) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPOWERMGMT_FILECODE (0xA043) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIESILICONSERVICES_FILECODE (0xA045) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE (0xA046) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE (0xA047) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE (0xA048) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE (0xA049) +#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIETRAINING_FILECODE (0xA04A) +#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIEWORKAROUNDS_FILECODE (0xA04B) +#define PROC_GNB_MODULES_GNBPCIECOMMCLKCFG_PCIECOMMCLKCFG_FILECODE (0xA04C) + +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE (0xA08E) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE (0xA08F) +#define PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE (0xA090) +#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE (0xA091) +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGLIB_FILECODE (0xA093) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEWRAPPERSERVICESV4_FILECODE (0xA0A6) +#define PROC_GNB_MODULES_GNBIOMMUIVRS_GNBIOMMUIVRS_FILECODE (0xA0A7) +#define PROC_GNB_MODULES_GNBIVRSLIB_GNBIVRSLIB_FILECODE (0xA0A8) +#define PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE (0xA0A9) +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE (0xA0AA) + +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE (0xA0BA) +#define PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE (0xA0BB) +#define PROC_GNB_MODULES_GNBSBIOMMULIB_GNBSBIOMMULIB_FILECODE (0xA0BC) +#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBTIMERLIB_FILECODE (0xA0BD) +#define PROC_GNB_MODULES_GNBSSOCKETLIB_GNBSSOCKETLIB_FILECODE (0xA0BF) +#define PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE (0xA0C0) +#define PROC_GNB_MODULES_GNBPCIEASPM_PCIEASPM_FILECODE (0xA0C2) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEASPMEXITLATENCYV5_FILECODE (0xA0C5) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE (0xA0C6) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE (0xA0C7) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPOWERMGMTV5_FILECODE (0xA0C8) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE (0xA0C9) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE (0xA0CA) +#define PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE (0xA0CB) + +#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE (0xA0DB) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPOWERMGMTV4_FILECODE (0xA0DC) +#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE (0xA0DD) + +#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGMID_FILECODE (0xA0E0) + +#define PROC_GNB_MODULES_GNBIOAPIC_GNBIOAPIC_FILECODE (0xA0EE) + +#define PROC_GNB_MODULES_GNBPCIEMAXPAYLOAD_PCIEMAXPAYLOAD_FILECODE (0xA0F4) +#define PROC_GNB_MODULES_GNBPCIECLKPM_PCIECLKPM_FILECODE (0xA0F5) + +#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIETOPOLOGYSERVICESV5_FILECODE (0xA100) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIETRAININGV2_FILECODE (0xA101) +#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIEWORKAROUNDSV2_FILECODE (0xA102) + +#define PROC_RECOVERY_GNB_GNBRECOVERY_FILECODE (0xAE01) +#define PROC_RECOVERY_GNB_NBINITRECOVERY_FILECODE (0xAE02) +#define PROC_GNB_GNBINITATS3SAVE_FILECODE (0xAE03) +#define PROC_GNB_MODULES_GNBSVIEW_GNBSVIEW_FILECODE (0xAE04) + +#define PROC_GNB_MODULES_GNBIOMMUSCRATCH_GNBIOMMUSCRATCH_FILECODE (0xAE18) +#define PROC_GNB_MODULES_GNBSMULIBV7_GNBSMUINITLIBV7_FILECODE (0xAE1A) + +#define PROC_GNB_MODULES_GNBPCIEALIBV2_PCIEALIBV2_FILECODE (0xAE33) +#define PROC_GNB_MODULES_GNBURALIBV1_GNBURALIBV1_FILECODE (0xAE3A) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXLIBV3_FILECODE (0xAE41) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXINTEGRATEDINFOTABLE_FILECODE (0xAE42) +#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXPWRPLAYTABLE_FILECODE (0xAE43) +#define PROC_GNB_MODULES_GNBSCSLIBV1_GNBSCSLIBV1_FILECODE (0xAE44) + +#define PROC_GNB_MODULES_GNBINITML_GFXENVINITML_FILECODE (0xAE50) +#define PROC_GNB_MODULES_GNBINITML_GFXINTEGRATEDINFOTABLEML_FILECODE (0xAE51) +#define PROC_GNB_MODULES_GNBINITML_GFXMIDINITML_FILECODE (0xAE52) +#define PROC_GNB_MODULES_GNBINITML_GFXPOSTINITML_FILECODE (0xAE53) +#define PROC_GNB_MODULES_GNBINITML_GFXLIBML_FILECODE (0xAE54) +#define PROC_GNB_MODULES_GNBINITML_GNBEARLYINITML_FILECODE (0xAE55) +#define PROC_GNB_MODULES_GNBINITML_GNBENVINITML_FILECODE (0xAE56) +#define PROC_GNB_MODULES_GNBINITML_GNBMIDINITML_FILECODE (0xAE57) +#define PROC_GNB_MODULES_GNBINITML_GNBPOSTINITML_FILECODE (0xAE58) +#define PROC_GNB_MODULES_GNBINITML_GNBREGISTERACCML_FILECODE (0xAE59) +#define PROC_GNB_MODULES_GNBINITML_PCIECOMPLEXDATAML_FILECODE (0xAE5A) +#define PROC_GNB_MODULES_GNBINITML_PCIECONFIGML_FILECODE (0xAE5B) +#define PROC_GNB_MODULES_GNBINITML_PCIEEARLYINITML_FILECODE (0xAE5C) +#define PROC_GNB_MODULES_GNBINITML_PCIEENVINITML_FILECODE (0xAE5D) +#define PROC_GNB_MODULES_GNBINITML_PCIEMIDINITML_FILECODE (0xAE5F) +#define PROC_GNB_MODULES_GNBINITML_PCIEPOSTINITML_FILECODE (0xAE60) +#define PROC_GNB_MODULES_GNBINITML_PCIELIBML_FILECODE (0xAE61) +#define PROC_GNB_MODULES_GNBINITML_GFXGMCINITML_FILECODE (0xAE62) +#define PROC_GNB_MODULES_GNBINITML_ALIBML_FILECODE (0xAE63) +#define PROC_GNB_MODULES_GNBINITML_GNBFUSETABLEML_FILECODE (0xAE64) +#define PROC_GNB_MODULES_GNBINITML_GFXSAMUINITML_FILECODE (0xAE65) +#define PROC_GNB_MODULES_GNBINITML_GNBURAML_FILECODE (0xAE66) +#define PROC_GNB_MODULES_GNBINITML_GNBURATOKENMAPML_FILECODE (0xAE67) +#define PROC_GNB_MODULES_GNBINITML_GNBIOMMUIVRSML_FILECODE (0xAE68) +#define PROC_GNB_MODULES_GNBINITML_GNBPSPML_FILECODE (0xAE69) +#define PROC_GNB_MODULES_GNBINITML_GNBSMUBIOSTABLEML_FILECODE (0xAE6A) + +// FCH +#define PROC_FCH_COMMON_ACPILIB_FILECODE (0xB010) +#define PROC_FCH_COMMON_FCHLIB_FILECODE (0xB011) +#define PROC_FCH_COMMON_FCHCOMMON_FILECODE (0xB012) +#define PROC_FCH_COMMON_FCHCOMMONSMM_FILECODE (0xB013) +#define PROC_FCH_COMMON_MEMLIB_FILECODE (0xB014) +#define PROC_FCH_COMMON_PCILIB_FILECODE (0xB015) +#define PROC_FCH_COMMON_FCHPELIB_FILECODE (0xB016) +#define UEFI_DXE_AMDIGPUVGACONTROLDXE_AMDIGPUVGACONTROLDXE_FILECODE (0xB218) +#define UEFI_SMM_MEMSMMLIB_MEMSMMLIB_FILECODE (0xB2C1) +#define UEFI_SMM_MEMSMMLIB_ML_DRAMMAPML_FILECODE (0xB2C4) +#define PROC_FCH_AVALON_AVALONAZALIA_AVALONAZALIARESET_FILECODE (0xB300) +#define PROC_FCH_AVALON_AVALONAZALIA_AVALONAZALIAENV_FILECODE (0xB301) +#define PROC_FCH_AVALON_AVALONAZALIA_AVALONAZALIAMID_FILECODE (0xB302) +#define PROC_FCH_AVALON_AVALONAZALIA_AVALONAZALIALATE_FILECODE (0xB303) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPIRESET_FILECODE (0xB310) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPIENV_FILECODE (0xB311) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPIMID_FILECODE (0xB312) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPILATE_FILECODE (0xB313) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONSSSERVICE_FILECODE (0xB314) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPIENVSERVICE_FILECODE (0xB315) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPIMIDSERVICE_FILECODE (0xB316) +#define PROC_FCH_AVALON_AVALONHWACPI_AVALONHWACPILATESERVICE_FILECODE (0xB317) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMRESET_FILECODE (0xB320) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMENV_FILECODE (0xB321) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMMID_FILECODE (0xB322) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMLATE_FILECODE (0xB323) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMENVSERVICE_FILECODE (0xB324) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMMIDSERVICE_FILECODE (0xB325) +#define PROC_FCH_AVALON_AVALONHWM_AVALONHWMLATESERVICE_FILECODE (0xB326) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHINITRESET_FILECODE (0xB327) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHINITENV_FILECODE (0xB328) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHINITMID_FILECODE (0xB329) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHINITLATE_FILECODE (0xB32A) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHINITS3_FILECODE (0xB32B) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONINITRESETDEF_FILECODE (0xB32C) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONINITENVDEF_FILECODE (0xB32D) +#define PROC_FCH_AVALON_AVALONINTERFACE_AVALONFCHTASKLAUNCHER_FILECODE (0xB32E) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCRESET_FILECODE (0xB330) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCENV_FILECODE (0xB331) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCMID_FILECODE (0xB332) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCLATE_FILECODE (0xB333) +#define PROC_FCH_AVALON_AVALONIMC_AVALONFCHECRESET_FILECODE (0xB334) +#define PROC_FCH_AVALON_AVALONIMC_AVALONFCHECENV_FILECODE (0xB335) +#define PROC_FCH_AVALON_AVALONIMC_AVALONFCHECMID_FILECODE (0xB336) +#define PROC_FCH_AVALON_AVALONIMC_AVALONFCHECLATE_FILECODE (0xB337) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCLIB_FILECODE (0xB338) +#define PROC_FCH_AVALON_AVALONIMC_AVALONIMCSERVICE_FILECODE (0xB339) +#define PROC_FCH_AVALON_AVALONIR_AVALONIRENV_FILECODE (0xB33A) +#define PROC_FCH_AVALON_AVALONIR_AVALONIRMID_FILECODE (0xB33B) +#define PROC_FCH_AVALON_AVALONIR_AVALONIRLATE_FILECODE (0xB33C) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABRESET_FILECODE (0xB340) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABENV_FILECODE (0xB341) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABMID_FILECODE (0xB342) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABLATE_FILECODE (0xB343) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABENVSERVICE_FILECODE (0xB34C) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABRESETSERVICE_FILECODE (0xB34D) +#define PROC_FCH_AVALON_AVALONPCIE_AVALONABSERVICE_FILECODE (0xB34E) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATARESET_FILECODE (0xB360) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAENV_FILECODE (0xB361) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAMID_FILECODE (0xB362) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATALATE_FILECODE (0xB363) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATARESETSERVICE_FILECODE (0xB364) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAENVSERVICE_FILECODE (0xB365) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATASERVICE_FILECODE (0xB366) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATALIB_FILECODE (0xB367) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAENVLIB_FILECODE (0xB368) +#define PROC_FCH_AVALON_AVALONSATA_AVALONAHCILIB_FILECODE (0xB369) +#define PROC_FCH_AVALON_AVALONSATA_AVALONAHCIENV_FILECODE (0xB36A) +#define PROC_FCH_AVALON_AVALONSATA_AVALONAHCIMID_FILECODE (0xB36B) +#define PROC_FCH_AVALON_AVALONSATA_AVALONAHCILATE_FILECODE (0xB36C) +#define PROC_FCH_AVALON_AVALONSATA_AVALONRAIDLIB_FILECODE (0xB36D) +#define PROC_FCH_AVALON_AVALONSATA_AVALONRAIDENV_FILECODE (0xB36E) +#define PROC_FCH_AVALON_AVALONSATA_AVALONRAIDMID_FILECODE (0xB36F) +#define PROC_FCH_AVALON_AVALONSATA_AVALONRAIDLATE_FILECODE (0xB370) +#define PROC_FCH_AVALON_AVALONSATA_AVALONIDE2AHCILIB_FILECODE (0xB371) +#define PROC_FCH_AVALON_AVALONSATA_AVALONIDE2AHCIENV_FILECODE (0xB372) +#define PROC_FCH_AVALON_AVALONSATA_AVALONIDE2AHCIMID_FILECODE (0xB373) +#define PROC_FCH_AVALON_AVALONSATA_AVALONIDE2AHCILATE_FILECODE (0xB374) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAIDELIB_FILECODE (0xB375) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAIDEENV_FILECODE (0xB376) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAIDEMID_FILECODE (0xB377) +#define PROC_FCH_AVALON_AVALONSATA_AVALONSATAIDELATE_FILECODE (0xB378) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDENV_FILECODE (0xB381) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDMID_FILECODE (0xB382) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDLATE_FILECODE (0xB383) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDRESETSERVICE_FILECODE (0xB384) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDENVSERVICE_FILECODE (0xB385) +#define PROC_FCH_AVALON_AVALONSD_AVALONSDSERVICE_FILECODE (0xB386) +#define PROC_FCH_AVALON_AVALONSPI_AVALONSPIRESET_FILECODE (0xB390) +#define PROC_FCH_AVALON_AVALONSPI_AVALONSPIENV_FILECODE (0xB391) +#define PROC_FCH_AVALON_AVALONSPI_AVALONSPIMID_FILECODE (0xB392) +#define PROC_FCH_AVALON_AVALONSPI_AVALONSPILATE_FILECODE (0xB393) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCRESET_FILECODE (0xB394) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCENV_FILECODE (0xB395) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCMID_FILECODE (0xB396) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCLATE_FILECODE (0xB397) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCRESETSERVICE_FILECODE (0xB398) +#define PROC_FCH_AVALON_AVALONSPI_AVALONLPCENVSERVICE_FILECODE (0xB399) +#define PROC_FCH_AVALON_AVALONUSB_AVALONUSBRESET_FILECODE (0xB3A0) +#define PROC_FCH_AVALON_AVALONUSB_AVALONUSBENV_FILECODE (0xB3A1) +#define PROC_FCH_AVALON_AVALONUSB_AVALONUSBMID_FILECODE (0xB3A2) +#define PROC_FCH_AVALON_AVALONUSB_AVALONUSBLATE_FILECODE (0xB3A3) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCIRESET_FILECODE (0xB3A4) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCIENV_FILECODE (0xB3A5) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCIMID_FILECODE (0xB3A6) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCILATE_FILECODE (0xB3A7) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCIMIDSERVICE_FILECODE (0xB3A8) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCIENVSERVICE_FILECODE (0xB3A9) +#define PROC_FCH_AVALON_AVALONUSB_AVALONEHCILATESERVICE_FILECODE (0xB3AA) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIRESET_FILECODE (0xB3B2) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIENV_FILECODE (0xB3B3) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIMID_FILECODE (0xB3B4) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCILATE_FILECODE (0xB3B5) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIRESETSERVICE_FILECODE (0xB3B6) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIENVSERVICE_FILECODE (0xB3B7) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIMIDSERVICE_FILECODE (0xB3B8) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCILATESERVICE_FILECODE (0xB3B9) +#define PROC_FCH_AVALON_AVALONUSB_AVALONXHCIRECOVERY_FILECODE (0xB3BA) +#define UEFI_FCH_AVALON_DXE_FCHACPICS_FCHACPICS_FILECODE (0xB308) +#define UEFI_FCH_AVALON_DXE_FCHACPICS_FCHACPICSAML_FILECODE (0xB309) +#define UEFI_FCH_AVALON_DXE_FCHACPICS_FCHACPICSCONTROL_FILECODE (0xB30A) +#define UEFI_FCH_AVALON_DXE_FCHACPICS_FUNCTIONS_FCHD3COLD_FCHD3COLD_FILECODE (0xB30B) +#define UEFI_FCH_AVALON_DXE_AMDFCHHWM_AMDFCHHWM_FILECODE (0xB3C1) +#define UEFI_FCH_AVALON_DXE_AMDFCHWHEA_AMDFCHWHEA_FILECODE (0xB3C2) +#define UEFI_FCH_AVALON_DXE_AMDFCHWHEA_AMDFCHWHEAEINJ_FILECODE (0xB3C3) +#define UEFI_FCH_AVALON_DXE_AMDFCHWHEA_AMDFCHWHEAHEST_FILECODE (0xB3C4) +#define UEFI_FCH_AVALON_DXE_CF9RESET_CF9RESET_FILECODE (0xB3C5) +#define UEFI_FCH_AVALON_DXE_CF9RESET_IA32_IA32CF9RESET_FILECODE (0xB3C6) +#define UEFI_FCH_AVALON_DXE_CF9RESET_X64_X64CF9RESET_FILECODE (0xB3C7) +#define UEFI_FCH_AVALON_DXE_FCHDXE_FCHDXE_FILECODE (0xB3C8) +#define UEFI_FCH_AVALON_DXE_FCHDXE_USBOC_FILECODE (0xB3C9) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_DXEBOOTTIMER_FILECODE (0xB3CA) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_DXEDISUSBPORT_FILECODE (0xB3CB) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_DXEESATAPORT_FILECODE (0xB3CC) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_DXEGPIO_FILECODE (0xB3CD) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_DXEGPIOREAD_FILECODE (0xB3CE) +#define UEFI_FCH_AVALON_DXE_FCHDXEAUX_FCHDXEAUX_FILECODE (0xB3CF) +#define UEFI_FCH_AVALON_DXE_FCHDXELIB_FCHDXELIB_FILECODE (0xB3D0) +#define UEFI_FCH_AVALON_DXE_FCHDXELPCCLKRUN_FCHDXELPCCLKRUN_FILECODE (0xB3D1) +#define UEFI_FCH_AVALON_DXE_FCHDXEMMIO_FCHDXEMMIO_FILECODE (0xB3D2) +#define UEFI_FCH_AVALON_DXE_LEGACYINTERRUPT_LEGACYINTERRUPT_FILECODE (0xB3D3) +#define UEFI_FCH_AVALON_DXE_SMBUS_SMBUSLIGHT_FILECODE (0xB3D4) +#define UEFI_FCH_AVALON_DXE_SMMCONTROL_SMMCONTROL_FILECODE (0xB3D5) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHEHCIRECOVERY_FILECODE (0xB3D6) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHPEI_FILECODE (0xB3D8) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHRESET_FILECODE (0xB3D9) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHSATARECOVERY_FILECODE (0xB3DA) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHSTALL_FILECODE (0xB3DB) +#define UEFI_FCH_AVALON_PEI_FCHPEI_FCHXHCIRECOVERY_FILECODE (0xB3DC) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_FCHPEIAUX_FILECODE (0xB3DD) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_PEIBOOTTIMER_FILECODE (0xB3DE) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_PEIDISUSBPORT_FILECODE (0xB3DF) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_PEIGPIO_FILECODE (0xB3E0) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_PEIGPIOREAD_FILECODE (0xB3E1) +#define UEFI_FCH_AVALON_PEI_FCHPEIAUX_PEIOSCOUTCLOCK_FILECODE (0xB3E2) +#define UEFI_FCH_AVALON_PEI_FCHPEILIB_FCHPEILIB_FILECODE (0xB3E3) +#define UEFI_FCH_AVALON_PEI_FCHPEILIB_LIBAMDPEI_FILECODE (0xB3E4) +#define UEFI_FCH_AVALON_PEI_SMBUS_SMBUS_FILECODE (0xB3E5) +#define UEFI_FCH_AVALON_SMM_FCHSMM_FCHSMM_FILECODE (0xB3E6) +#define UEFI_FCH_AVALON_SMM_FCHSMM_GPESMI_FILECODE (0xB3E7) +#define UEFI_FCH_AVALON_SMM_FCHSMM_IOTRAPSMI_FILECODE (0xB3E8) +#define UEFI_FCH_AVALON_SMM_FCHSMM_MISCSMI_FILECODE (0xB3E9) +#define UEFI_FCH_AVALON_SMM_FCHSMM_PERIODICTIMERSMI_FILECODE (0xB3EA) +#define UEFI_FCH_AVALON_SMM_FCHSMM_POWERBUTTONSMI_FILECODE (0xB3EB) +#define UEFI_FCH_AVALON_SMM_FCHSMM_SWSMI_FILECODE (0xB3EC) +#define UEFI_FCH_AVALON_SMM_FCHSMM_SXSMI_FILECODE (0xB3ED) +#define UEFI_FCH_AVALON_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROL_FILECODE (0xB3F0) +#define UEFI_FCH_AVALON_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROLLIB_FILECODE (0xB3F1) +#define UEFI_FCH_AVALON_SMM_FCHSMMLIB_FCHDXECOMMON_FILECODE (0xB3F5) +#define UEFI_FCH_AVALON_SMM_FCHSMMLIB_FCHSMMLIB_FILECODE (0xB3F6) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMDISPATCHER_FILECODE (0xB3F7) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMGPEDISPATCHER_FCHSMMGPEDISPATCHER_FILECODE (0xB3F8) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMIOTRAPDISPATCHER_FCHSMMIOTRAPDISPATCHER_FILECODE (0xB3F9) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMMISCDISPATCHER_FCHSMMMISCDISPATCHER_FILECODE (0xB3FA) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMPERIODICALDISPATCHER_FCHSMMPERIODICALDISPATCHER_FILECODE (0xB3FB) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMPWRBTNDISPATCHER_FCHSMMPWRBTNDISPATCHER_FILECODE (0xB3FC) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMSWDISPATCHER_FCHSMMSWDISPATCHER_FILECODE (0xB3FE) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMSXDISPATCHER_FCHSMMSXDISPATCHER_FILECODE (0xB3FF) +#define UEFI_FCH_AVALON_SMM_FCHSMMDISPATCHER_FCHSMMUSBDISPATCHER_FCHSMMUSBDISPATCHER_FILECODE (0xB3F2) + +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIARESET_FILECODE (0xB400) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIAENV_FILECODE (0xB401) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIAMID_FILECODE (0xB402) +#define PROC_FCH_KERN_KERNAZALIA_KERNAZALIALATE_FILECODE (0xB403) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIRESET_FILECODE (0xB410) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIENV_FILECODE (0xB411) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIMID_FILECODE (0xB412) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPILATE_FILECODE (0xB413) +#define PROC_FCH_KERN_KERNHWACPI_KERNSSSERVICE_FILECODE (0xB414) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIENVSERVICE_FILECODE (0xB415) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPIMIDSERVICE_FILECODE (0xB416) +#define PROC_FCH_KERN_KERNHWACPI_KERNHWACPILATESERVICE_FILECODE (0xB417) +#define PROC_FCH_KERN_KERNHWM_KERNHWMRESET_FILECODE (0xB420) +#define PROC_FCH_KERN_KERNHWM_KERNHWMENV_FILECODE (0xB421) +#define PROC_FCH_KERN_KERNHWM_KERNHWMMID_FILECODE (0xB422) +#define PROC_FCH_KERN_KERNHWM_KERNHWMLATE_FILECODE (0xB423) +#define PROC_FCH_KERN_KERNHWM_KERNHWMENVSERVICE_FILECODE (0xB424) +#define PROC_FCH_KERN_KERNHWM_KERNHWMMIDSERVICE_FILECODE (0xB425) +#define PROC_FCH_KERN_KERNHWM_KERNHWMLATESERVICE_FILECODE (0xB426) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITRESET_FILECODE (0xB427) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITENV_FILECODE (0xB428) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITMID_FILECODE (0xB429) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITLATE_FILECODE (0xB42A) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHINITS3_FILECODE (0xB42B) +#define PROC_FCH_KERN_KERNINTERFACE_KERNINITRESETDEF_FILECODE (0xB42C) +#define PROC_FCH_KERN_KERNINTERFACE_KERNINITENVDEF_FILECODE (0xB42D) +#define PROC_FCH_KERN_KERNINTERFACE_KERNFCHTASKLAUNCHER_FILECODE (0xB42E) +#define PROC_FCH_KERN_KERNIMC_KERNIMCRESET_FILECODE (0xB430) +#define PROC_FCH_KERN_KERNIMC_KERNIMCENV_FILECODE (0xB431) +#define PROC_FCH_KERN_KERNIMC_KERNIMCMID_FILECODE (0xB432) +#define PROC_FCH_KERN_KERNIMC_KERNIMCLATE_FILECODE (0xB433) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECRESET_FILECODE (0xB434) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECENV_FILECODE (0xB435) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECMID_FILECODE (0xB436) +#define PROC_FCH_KERN_KERNIMC_KERNFCHECLATE_FILECODE (0xB437) +#define PROC_FCH_KERN_KERNIMC_KERNIMCLIB_FILECODE (0xB438) +#define PROC_FCH_KERN_KERNIMC_KERNIMCSERVICE_FILECODE (0xB439) +#define PROC_FCH_KERN_KERNPCIE_KERNABRESET_FILECODE (0xB440) +#define PROC_FCH_KERN_KERNPCIE_KERNABENV_FILECODE (0xB441) +#define PROC_FCH_KERN_KERNPCIE_KERNABMID_FILECODE (0xB442) +#define PROC_FCH_KERN_KERNPCIE_KERNABLATE_FILECODE (0xB443) +#define PROC_FCH_KERN_KERNPCIE_KERNABENVSERVICE_FILECODE (0xB44C) +#define PROC_FCH_KERN_KERNPCIE_KERNABRESETSERVICE_FILECODE (0xB44D) +#define PROC_FCH_KERN_KERNPCIE_KERNABSERVICE_FILECODE (0xB44E) +#define PROC_FCH_KERN_KERNSATA_KERNSATARESET_FILECODE (0xB460) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENV_FILECODE (0xB461) +#define PROC_FCH_KERN_KERNSATA_KERNSATAMID_FILECODE (0xB462) +#define PROC_FCH_KERN_KERNSATA_KERNSATALATE_FILECODE (0xB463) +#define PROC_FCH_KERN_KERNSATA_KERNSATARESETSERVICE_FILECODE (0xB464) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENVSERVICE_FILECODE (0xB465) +#define PROC_FCH_KERN_KERNSATA_KERNSATASERVICE_FILECODE (0xB466) +#define PROC_FCH_KERN_KERNSATA_KERNSATALIB_FILECODE (0xB467) +#define PROC_FCH_KERN_KERNSATA_KERNSATAENVLIB_FILECODE (0xB468) +#define PROC_FCH_KERN_KERNSATA_KERNAHCILIB_FILECODE (0xB469) +#define PROC_FCH_KERN_KERNSATA_KERNAHCIENV_FILECODE (0xB46A) +#define PROC_FCH_KERN_KERNSATA_KERNAHCIMID_FILECODE (0xB46B) +#define PROC_FCH_KERN_KERNSATA_KERNAHCILATE_FILECODE (0xB46C) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDLIB_FILECODE (0xB46D) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDENV_FILECODE (0xB46E) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDMID_FILECODE (0xB46F) +#define PROC_FCH_KERN_KERNSATA_KERNRAIDLATE_FILECODE (0xB470) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCILIB_FILECODE (0xB471) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCIENV_FILECODE (0xB472) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCIMID_FILECODE (0xB473) +#define PROC_FCH_KERN_KERNSATA_KERNIDE2AHCILATE_FILECODE (0xB474) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDELIB_FILECODE (0xB475) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDEENV_FILECODE (0xB476) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDEMID_FILECODE (0xB477) +#define PROC_FCH_KERN_KERNSATA_KERNSATAIDELATE_FILECODE (0xB478) +#define PROC_FCH_KERN_KERNSD_KERNSDENV_FILECODE (0xB481) +#define PROC_FCH_KERN_KERNSD_KERNSDMID_FILECODE (0xB482) +#define PROC_FCH_KERN_KERNSD_KERNSDLATE_FILECODE (0xB483) +#define PROC_FCH_KERN_KERNSD_KERNSDRESETSERVICE_FILECODE (0xB484) +#define PROC_FCH_KERN_KERNSD_KERNSDENVSERVICE_FILECODE (0xB485) +#define PROC_FCH_KERN_KERNSD_KERNSDSERVICE_FILECODE (0xB486) +#define PROC_FCH_KERN_KERNSPI_KERNSPIRESET_FILECODE (0xB490) +#define PROC_FCH_KERN_KERNSPI_KERNSPIENV_FILECODE (0xB491) +#define PROC_FCH_KERN_KERNSPI_KERNSPIMID_FILECODE (0xB492) +#define PROC_FCH_KERN_KERNSPI_KERNSPILATE_FILECODE (0xB493) +#define PROC_FCH_KERN_KERNSPI_KERNLPCRESET_FILECODE (0xB494) +#define PROC_FCH_KERN_KERNSPI_KERNLPCENV_FILECODE (0xB495) +#define PROC_FCH_KERN_KERNSPI_KERNLPCMID_FILECODE (0xB496) +#define PROC_FCH_KERN_KERNSPI_KERNLPCLATE_FILECODE (0xB497) +#define PROC_FCH_KERN_KERNSPI_KERNLPCRESETSERVICE_FILECODE (0xB498) +#define PROC_FCH_KERN_KERNSPI_KERNLPCENVSERVICE_FILECODE (0xB499) +#define PROC_FCH_KERN_KERNUSB_KERNUSBRESET_FILECODE (0xB4A0) +#define PROC_FCH_KERN_KERNUSB_KERNUSBENV_FILECODE (0xB4A1) +#define PROC_FCH_KERN_KERNUSB_KERNUSBMID_FILECODE (0xB4A2) +#define PROC_FCH_KERN_KERNUSB_KERNUSBLATE_FILECODE (0xB4A3) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIRESET_FILECODE (0xB4A4) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIENV_FILECODE (0xB4A5) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIMID_FILECODE (0xB4A6) +#define PROC_FCH_KERN_KERNUSB_KERNEHCILATE_FILECODE (0xB4A7) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIMIDSERVICE_FILECODE (0xB4A8) +#define PROC_FCH_KERN_KERNUSB_KERNEHCIENVSERVICE_FILECODE (0xB4A9) +#define PROC_FCH_KERN_KERNUSB_KERNEHCILATESERVICE_FILECODE (0xB4AA) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRESET_FILECODE (0xB4B2) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIENV_FILECODE (0xB4B3) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIMID_FILECODE (0xB4B4) +#define PROC_FCH_KERN_KERNUSB_KERNXHCILATE_FILECODE (0xB4B5) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRESETSERVICE_FILECODE (0xB4B6) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIENVSERVICE_FILECODE (0xB4B7) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIMIDSERVICE_FILECODE (0xB4B8) +#define PROC_FCH_KERN_KERNUSB_KERNXHCILATESERVICE_FILECODE (0xB4B9) +#define PROC_FCH_KERN_KERNUSB_KERNXHCIRECOVERY_FILECODE (0xB4BA) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICS_FILECODE (0xB408) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICSAML_FILECODE (0xB409) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FCHACPICSCONTROL_FILECODE (0xB40A) +#define UEFI_FCH_KERN_DXE_FCHACPICS_FUNCTIONS_FCHD3COLD_FCHD3COLD_FILECODE (0xB40B) +#define UEFI_FCH_KERN_DXE_AMDFCHHWM_AMDFCHHWM_FILECODE (0xB4C1) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEA_FILECODE (0xB4C2) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEAEINJ_FILECODE (0xB4C3) +#define UEFI_FCH_KERN_DXE_AMDFCHWHEA_AMDFCHWHEAHEST_FILECODE (0xB4C4) +#define UEFI_FCH_KERN_DXE_CF9RESET_CF9RESET_FILECODE (0xB4C5) +#define UEFI_FCH_KERN_DXE_CF9RESET_IA32_IA32CF9RESET_FILECODE (0xB4C6) +#define UEFI_FCH_KERN_DXE_CF9RESET_X64_X64CF9RESET_FILECODE (0xB4C7) +#define UEFI_FCH_KERN_DXE_FCHDXE_FCHDXE_FILECODE (0xB4C8) +#define UEFI_FCH_KERN_DXE_FCHDXE_USBOC_FILECODE (0xB4C9) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEBOOTTIMER_FILECODE (0xB4CA) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEDISUSBPORT_FILECODE (0xB4CB) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEESATAPORT_FILECODE (0xB4CC) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEGPIO_FILECODE (0xB4CD) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_DXEGPIOREAD_FILECODE (0xB4CE) +#define UEFI_FCH_KERN_DXE_FCHDXEAUX_FCHDXEAUX_FILECODE (0xB4CF) +#define UEFI_FCH_KERN_DXE_FCHDXELIB_FCHDXELIB_FILECODE (0xB4D0) +#define UEFI_FCH_KERN_DXE_FCHDXELPCCLKRUN_FCHDXELPCCLKRUN_FILECODE (0xB4D1) +#define UEFI_FCH_KERN_DXE_FCHDXEMMIO_FCHDXEMMIO_FILECODE (0xB4D2) +#define UEFI_FCH_KERN_DXE_LEGACYINTERRUPT_LEGACYINTERRUPT_FILECODE (0xB4D3) +#define UEFI_FCH_KERN_DXE_SMBUS_SMBUSLIGHT_FILECODE (0xB4D4) +#define UEFI_FCH_KERN_DXE_SMMCONTROL_SMMCONTROL_FILECODE (0xB4D5) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHEHCIRECOVERY_FILECODE (0xB4D6) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHPEI_FILECODE (0xB4D8) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHRESET_FILECODE (0xB4D9) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHSATARECOVERY_FILECODE (0xB4DA) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHSTALL_FILECODE (0xB4DB) +#define UEFI_FCH_KERN_PEI_FCHPEI_FCHXHCIRECOVERY_FILECODE (0xB4DC) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_FCHPEIAUX_FILECODE (0xB4DD) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIBOOTTIMER_FILECODE (0xB4DE) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIDISUSBPORT_FILECODE (0xB4DF) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIGPIO_FILECODE (0xB4E0) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIGPIOREAD_FILECODE (0xB4E1) +#define UEFI_FCH_KERN_PEI_FCHPEIAUX_PEIOSCOUTCLOCK_FILECODE (0xB4E2) +#define UEFI_FCH_KERN_PEI_FCHPEILIB_FCHPEILIB_FILECODE (0xB4E3) +#define UEFI_FCH_KERN_PEI_FCHPEILIB_LIBAMDPEI_FILECODE (0xB4E4) +#define UEFI_FCH_KERN_PEI_SMBUS_SMBUS_FILECODE (0xB4E5) +#define UEFI_FCH_KERN_SMM_FCHSMM_FCHSMM_FILECODE (0xB4E6) +#define UEFI_FCH_KERN_SMM_FCHSMM_GPESMI_FILECODE (0xB4E7) +#define UEFI_FCH_KERN_SMM_FCHSMM_IOTRAPSMI_FILECODE (0xB4E8) +#define UEFI_FCH_KERN_SMM_FCHSMM_MISCSMI_FILECODE (0xB4E9) +#define UEFI_FCH_KERN_SMM_FCHSMM_PERIODICTIMERSMI_FILECODE (0xB4EA) +#define UEFI_FCH_KERN_SMM_FCHSMM_POWERBUTTONSMI_FILECODE (0xB4EB) +#define UEFI_FCH_KERN_SMM_FCHSMM_SWSMI_FILECODE (0xB4EC) +#define UEFI_FCH_KERN_SMM_FCHSMM_SXSMI_FILECODE (0xB4ED) +#define UEFI_FCH_KERN_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROL_FILECODE (0xB4F0) +#define UEFI_FCH_KERN_SMM_FCHSMMCOMPLEMENT_IMCCONTROL_IMCCONTROLLIB_FILECODE (0xB4F1) +#define UEFI_FCH_KERN_SMM_FCHSMMLIB_FCHDXECOMMON_FILECODE (0xB4F5) +#define UEFI_FCH_KERN_SMM_FCHSMMLIB_FCHSMMLIB_FILECODE (0xB4F6) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMDISPATCHER_FILECODE (0xB4F7) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMGPEDISPATCHER_FCHSMMGPEDISPATCHER_FILECODE (0xB4F8) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMIOTRAPDISPATCHER_FCHSMMIOTRAPDISPATCHER_FILECODE (0xB4F9) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMMISCDISPATCHER_FCHSMMMISCDISPATCHER_FILECODE (0xB4FA) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMPERIODICALDISPATCHER_FCHSMMPERIODICALDISPATCHER_FILECODE (0xB4FB) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMPWRBTNDISPATCHER_FCHSMMPWRBTNDISPATCHER_FILECODE (0xB4FC) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMSWDISPATCHER_FCHSMMSWDISPATCHER_FILECODE (0xB4FE) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMSXDISPATCHER_FCHSMMSXDISPATCHER_FILECODE (0xB4FF) +#define UEFI_FCH_KERN_SMM_FCHSMMDISPATCHER_FCHSMMUSBDISPATCHER_FCHSMMUSBDISPATCHER_FILECODE (0xB4F2) + +#define LIB_AMDLIB_FILECODE (0xC001) + +#define LEGACY_PROC_AGESACALLOUTS_FILECODE (0xC010) +#define LEGACY_PROC_HOBTRANSFER_FILECODE (0xC011) +#define LEGACY_PROC_DISPATCHER_FILECODE (0xC012) + +#define UEFI_DXE_AMDAGESADXEDRIVER_AMDAGESADXEDRIVER_FILECODE (0xC120) + +#define UEFI_PEI_AMDINITPOSTPEIM_AMDINITPOSTPEIM_FILECODE (0xC140) +#define UEFI_PEI_AMDPROCESSORINITPEIM_AMDPROCESSORINITPEIM_FILECODE (0xC141) +#define UEFI_PEI_AMDRESETMANAGER_AMDRESETMANAGER_FILECODE (0xC142) +#define UEFI_PROC_COMMON_HOBTRANSFERUEFI_FILECODE (0xC160) +#define UEFI_PROC_DXE_HOBTRANSFERUEFIDXE_FILECODE (0xC161) +#define UEFI_PROC_PEI_HOBTRANSFERUEFIPEI_FILECODE (0xC162) + +#define PROC_COMMON_AMDINITEARLY_FILECODE (0xC020) +#define PROC_COMMON_AMDINITENV_FILECODE (0xC021) +#define PROC_COMMON_AMDINITLATE_FILECODE (0xC022) +#define PROC_COMMON_AMDINITMID_FILECODE (0xC023) +#define PROC_COMMON_AMDINITPOST_FILECODE (0xC024) +#define PROC_COMMON_AMDINITRECOVERY_FILECODE (0xC025) +#define PROC_COMMON_AMDINITRESET_FILECODE (0xC026) +#define PROC_COMMON_AMDINITRESUME_FILECODE (0xC027) +#define PROC_COMMON_AMDS3LATERESTORE_FILECODE (0xC028) +#define PROC_COMMON_AMDS3SAVE_FILECODE (0xC029) +#define PROC_COMMON_AMDLATERUNAPTASK_FILECODE (0xC02A) + +#define PROC_COMMON_COMMONRETURNS_FILECODE (0xC0C0) +#define PROC_COMMON_CREATESTRUCT_FILECODE (0xC0D0) +#define PROC_COMMON_COMMONINITS_FILECODE (0xC0F0) +#define PROC_COMMON_S3RESTORESTATE_FILECODE (0xC0F8) +#define PROC_COMMON_S3SAVESTATE_FILECODE (0xC0F9) + +#define PROC_CPU_CPUAPICUTILITIES_FILECODE (0xC401) +#define PROC_CPU_TABLE_FILECODE (0xC403) +#define PROC_CPU_CPUEARLYINIT_FILECODE (0xC405) +#define PROC_CPU_CPUEVENTLOG_FILECODE (0xC406) +#define PROC_CPU_CPUFAMILYTRANSLATION_FILECODE (0xC407) +#define PROC_CPU_CPUGENERALSERVICES_FILECODE (0xC408) +#define PROC_CPU_CPULATEINIT_FILECODE (0xC40A) +#define PROC_CPU_CPUMICROCODEPATCH_FILECODE (0xC40B) +#define PROC_CPU_CPUWARMRESET_FILECODE (0xC40C) +#define PROC_CPU_HEAPMANAGER_FILECODE (0xC40D) +#define PROC_CPU_CPUBIST_FILECODE (0xC40E) +#define PROC_CPU_MMIOMAPMANAGER_FILECODE (0xC40F) + +#define PROC_CPU_CPUPOSTINIT_FILECODE (0xC420) +#define PROC_CPU_CPUPOWERMGMT_FILECODE (0xC430) +#define PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE (0xC432) +#define PROC_CPU_S3_FILECODE (0xC460) + +// Family 16h +#define PROC_CPU_FAMILY_0X16_CPUF16BRANDID_FILECODE (0xCC00) +#define PROC_CPU_FAMILY_0X16_CPUF16UTILITIES_FILECODE (0xCC01) +#define PROC_CPU_FAMILY_0X16_CPUF16WHEAINITDATATABLES_FILECODE (0xCC02) +#define PROC_CPU_FAMILY_0X16_CPUF16CACHEDEFAULTS_FILECODE (0xCC03) +#define PROC_CPU_FAMILY_0X16_CPUF16DMI_FILECODE (0xCC04) +#define PROC_CPU_FAMILY_0X16_CPUF16PCIUNKNOWNTABLES_FILECODE (0xCC05) +#define PROC_CPU_FAMILY_0X16_CPUF16MSRUNKNOWNTABLES_FILECODE (0xCC06) +#define PROC_CPU_FAMILY_0X16_CPUF16MMIOMAP_FILECODE (0xCC07) +#define PROC_CPU_FAMILY_0X16_CPUF16APM_FILECODE (0xCC09) +#define PROC_CPU_FAMILY_0X16_CPUF16CRAT_FILECODE (0xCC0A) + +#define PROC_CPU_FAMILY_0X16_ML_F16MLLOGICALIDTABLES_FILECODE (0xCC40) +#define PROC_CPU_FAMILY_0X16_ML_F16MLINITEARLYTABLE_FILECODE (0xCC41) +#define PROC_CPU_FAMILY_0X16_ML_F16MLEQUIVALENCETABLE_FILECODE (0xCC42) +#define PROC_CPU_FAMILY_0X16_ML_F16MLMICROCODEPATCHTABLES_FILECODE (0xCC43) +#define PROC_CPU_FAMILY_0X16_ML_F16MLPCITABLES_FILECODE (0xCC44) +#define PROC_CPU_FAMILY_0X16_ML_F16MLMSRTABLES_FILECODE (0xCC45) +#define PROC_CPU_FAMILY_0X16_ML_F16MLSHAREDMSRTABLE_FILECODE (0xCC46) +#define PROC_CPU_FAMILY_0X16_ML_F16MLUTILITIES_FILECODE (0xCC47) +#define PROC_CPU_FAMILY_0X16_ML_F16MLC6STATE_FILECODE (0xCC48) +#define PROC_CPU_FAMILY_0X16_ML_F16MLCOREAFTERRESET_FILECODE (0xCC49) +#define PROC_CPU_FAMILY_0X16_ML_F16MLCPB_FILECODE (0xCC4A) +#define PROC_CPU_FAMILY_0X16_ML_F16MLDMI_FILECODE (0xCC4B) +#define PROC_CPU_FAMILY_0X16_ML_F16MLIOCSTATE_FILECODE (0xCC4C) +#define PROC_CPU_FAMILY_0X16_ML_F16MLNBAFTERRESET_FILECODE (0xCC4D) +#define PROC_CPU_FAMILY_0X16_ML_F16MLPOWERCHECK_FILECODE (0xCC4E) +#define PROC_CPU_FAMILY_0X16_ML_F16MLPSTATE_FILECODE (0xCC4F) +#define PROC_CPU_FAMILY_0X16_ML_F16MLPSI_FILECODE (0xCC50) +#define PROC_CPU_FAMILY_0X16_ML_F16MLHTC_FILECODE (0xCC51) +#define PROC_CPU_FAMILY_0X16_ML_F16MLPOWERMGMTSYSTEMTABLES_FILECODE (0xCC52) +#define PROC_CPU_FAMILY_0X16_ML_F16MLSCS_FILECODE (0xCC53) +#define PROC_CPU_FAMILY_0X16_ML_F16MLCACHEFLUSHONHALT_FILECODE (0xCC54) +#define PROC_CPU_FAMILY_0X16_ML_F16MLCONNECTEDSTANDBY_FILECODE (0xCC55) +#define UEFI_PSP_LIBRARY_CSRESUMESMMLIB_ML_CSRESUMESMMLIBML_FILECODE (0xCC56) + +#define PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE (0xDC01) +#define PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE (0xDC02) +#define PROC_CPU_FEATURE_CPUDMI_FILECODE (0xDC10) +#define PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE (0xDC41) +#define PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE (0xDC42) +#define PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE (0xDC43) +#define PROC_CPU_FEATURE_CPUSLIT_FILECODE (0xDC50) +#define PROC_CPU_FEATURE_CPUSRAT_FILECODE (0xDC60) +#define PROC_CPU_FEATURE_CPUWHEA_FILECODE (0xDC70) +#define PROC_CPU_FEATURE_CPUC6STATE_FILECODE (0xDC82) +#define PROC_CPU_FEATURE_CPUCPB_FILECODE (0xDC83) +#define PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE (0xDC85) +#define PROC_CPU_FEATURE_CPUAPM_FILECODE (0xDC86) +#define PROC_CPU_FEATURE_CPUFEATURES_FILECODE (0xDC90) +#define PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE (0xDCB0) +#define PROC_CPU_FEATURE_CPUPSI_FILECODE (0xDCC0) +#define PROC_CPU_FEATURE_CPUHTC_FILECODE (0xDCC1) +#define PROC_CPU_FEATURE_CPUCRAT_FILECODE (0xDCD0) +#define PROC_CPU_FEATURE_CPUCDIT_FILECODE (0xDCD1) +#define PROC_CPU_FEATURE_CPUSCS_FILECODE (0xDCD4) +#define PROC_CPU_FEATURE_CPUCONNECTEDSTANDBY_FILECODE (0xDCD5) + +#define PROC_RECOVERY_CPU_CPURECOVERY_FILECODE (0xDE01) + +#define PROC_TOPOLOGY_TOPOMAIN_FILECODE (0xE001) +#define PROC_TOPOLOGY_TOPONB_FILECODE (0xE002) +#define PROC_TOPOLOGY_FAM16_TOPONBFAM16_FILECODE (0xE097) +#define PROC_TOPOLOGY_FAM16_TOPONBUTILITIESFAM16_FILECODE (0xE098) + +#define PROC_RECOVERY_TOPOLOGY_TOPOINITRECOVERY_FILECODE (0xE0FF) + +#define PROC_IDS_CONTROL_IDSCTRL_FILECODE (0xE801) +#define PROC_IDS_LIBRARY_IDSLIB_FILECODE (0xE802) +#define PROC_IDS_DEBUG_IDSDEBUG_FILECODE (0xE803) +#define PROC_IDS_PERF_IDSPERF_FILECODE (0xE804) +#define PROC_IDS_LIBRARY_IDSREGACC_FILECODE (0xE810) +#define PROC_IDS_DEBUG_IDSDPHDTOUT_FILECODE (0xE811) +#define PROC_IDS_DEBUG_IDSDEBUGPRINT_FILECODE (0xE812) +#define PROC_IDS_DEBUG_IDSDPSERIAL_FILECODE (0xE813) +#define PROC_IDS_DEBUG_IDSDPREDIRECTIO_FILECODE (0xE814) +#define PROC_IDS_DEBUG_IDSDPRAM_FILECODE (0xE815) + +#define PROC_IDS_DEBUG_IDSIDTTABLE_FILECODE (0xE81E) +#define PROC_IDS_CONTROL_IDSNVTOCMOS_FILECODE (0xE81F) +#define PROC_IDS_FAMILY_0X16_ML_IDSF16MLALLSERVICE_FILECODE (0xE823) + +///0xE820 ~ 0xE840 is reserved for ids extend module + +#define PROC_MEM_ARDK_MA_FILECODE (0xF001) + +#define PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE (0xF082) +#define PROC_MEM_FEAT_ECC_MFECC_FILECODE (0xF083) +#define PROC_MEM_FEAT_ECC_MFEMP_FILECODE (0xF085) +#define PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE (0xF086) +#define PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE (0xF088) +#define PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE (0xF08A) +#define PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE (0xF08B) +#define PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE (0xF08D) +#define PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE (0xF08F) +#define PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE (0xF091) +#define PROC_MEM_FEAT_S3_MFS3_FILECODE (0xF092) +#define PROC_MEM_FEAT_TABLE_MFTDS_FILECODE (0xF093) +#define PROC_MEM_FEAT_CRAT_MFCRAT_FILECODE (0xF095) +#define PROC_MEM_FEAT_DATAEYE_MF2DDATAEYE_FILECODE (0xF097) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFWRDAT2DTRAINING_FILECODE (0xF098) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DEYERIMSEARCH_FILECODE (0xF099) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDDQS2DTRAINING_FILECODE (0xF09A) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DTRAINING_FILECODE (0xF09B) +#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DPATTERNGENERATION_FILECODE (0xF09C) +#define PROC_MEM_FEAT_RDWR2DTRAINING_ML_MFRDWR2DML_FILECODE (0xF09E) +#define PROC_MEM_FEAT_DLLPDBYPASS_MFDLLPDBYPASS_FILECODE (0xF0A0) + +#define PROC_MEM_MAIN_MDEF_FILECODE (0xF101) +#define PROC_MEM_MAIN_MINIT_FILECODE (0xF102) +#define PROC_MEM_MAIN_MM_FILECODE (0xF103) +#define PROC_MEM_FEAT_DMI_MFDMI_FILECODE (0xF104) +#define PROC_MEM_MAIN_MMECC_FILECODE (0xF105) +#define PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE (0xF106) +#define PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE (0xF10B) +#define PROC_MEM_MAIN_MMONLINESPARE_FILECODE (0xF10C) +#define PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE (0xF10D) +#define PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE (0xF10E) +#define PROC_MEM_MAIN_MUC_FILECODE (0xF10F) +#define PROC_MEM_MAIN_MMMEMCLR_FILECODE (0xF110) +#define PROC_MEM_MAIN_MMFLOW_FILECODE (0xF112) +#define PROC_MEM_MAIN_MERRHDL_FILECODE (0xF113) +#define PROC_MEM_MAIN_MMLVDDR3_FILECODE (0xF115) +#define PROC_MEM_MAIN_MMUMAALLOC_FILECODE (0xF116) +#define PROC_MEM_MAIN_MMMEMRESTORE_FILECODE (0xF117) +#define PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE (0xF118) +#define PROC_MEM_MAIN_MMAGGRESSOR_FILECODE (0xF119) +#define PROC_MEM_MAIN_ML_MMFLOWML_FILECODE (0xF126) + +#define PROC_MEM_NB_MN_FILECODE (0XF27C) +#define PROC_MEM_NB_MNDCT_FILECODE (0XF27D) +#define PROC_MEM_NB_MNPHY_FILECODE (0XF27E) +#define PROC_MEM_NB_MNMCT_FILECODE (0XF27F) +#define PROC_MEM_NB_MNS3_FILECODE (0XF280) +#define PROC_MEM_NB_MNFLOW_FILECODE (0XF281) +#define PROC_MEM_NB_MNFEAT_FILECODE (0XF282) +#define PROC_MEM_NB_MNTRAIN3_FILECODE (0XF284) +#define PROC_MEM_NB_MNREG_FILECODE (0XF285) +#define PROC_MEM_NB_MNPMU_FILECODE (0xF2B7) +#define PROC_MEM_NB_ML_MNREGML_FILECODE (0XF2CD) +#define PROC_MEM_NB_ML_MNML_FILECODE (0XF2CE) +#define PROC_MEM_NB_ML_MNMCTML_FILECODE (0XF2CF) +#define PROC_MEM_NB_ML_MNOTML_FILECODE (0XF2D0) +#define PROC_MEM_NB_ML_MNDCTML_FILECODE (0XF2D1) +#define PROC_MEM_NB_ML_MNPHYML_FILECODE (0XF2D2) +#define PROC_MEM_NB_ML_MNS3ML_FILECODE (0XF2D3) +#define PROC_MEM_NB_ML_MNIDENDIMMML_FILECODE (0XF2D4) +#define PROC_MEM_NB_ML_MNFLOWML_FILECODE (0XF2D5) +#define PROC_MEM_NB_ML_MNPROTOML_FILECODE (0XF2D6) +#define PROC_MEM_NB_ML_MNPSPML_FILECODE (0XF2E2) + + + +#define PROC_MEM_PS_MP_FILECODE (0XF401) +#define PROC_MEM_PS_MPRTT_FILECODE (0XF422) +#define PROC_MEM_PS_MPMAXFREQ_FILECODE (0XF423) +#define PROC_MEM_PS_MPODTPAT_FILECODE (0XF424) +#define PROC_MEM_PS_MPSAO_FILECODE (0XF425) +#define PROC_MEM_PS_MPMR0_FILECODE (0XF426) +#define PROC_MEM_PS_MPRC2IBT_FILECODE (0XF427) +#define PROC_MEM_PS_MPRC10OPSPD_FILECODE (0XF428) +#define PROC_MEM_PS_MPLRIBT_FILECODE (0XF429) +#define PROC_MEM_PS_MPLRNPR_FILECODE (0XF42A) +#define PROC_MEM_PS_MPLRNLR_FILECODE (0XF42B) +#define PROC_MEM_PS_MPS2D_FILECODE (0XF436) +#define PROC_MEM_PS_MPSEEDS_FILECODE (0XF437) +#define PROC_MEM_PS_MPCADCFG_FILECODE (0XF43C) +#define PROC_MEM_PS_MPDATACFG_FILECODE (0XF43D) +#define PROC_MEM_PS_ML_MPSML3_FILECODE (0XF441) +#define PROC_MEM_PS_ML_MPML3_FILECODE (0XF442) +#define PROC_MEM_PS_ML_MPUML3_FILECODE (0XF443) +#define PROC_MEM_PS_ML_FT3_MPSMLFT3_FILECODE (0XF444) + +#define PROC_MEM_TECH_MT_FILECODE (0XF501) +#define PROC_MEM_TECH_MTHDI_FILECODE (0XF502) +#define PROC_MEM_TECH_MTTDIMBT_FILECODE (0XF504) +#define PROC_MEM_TECH_MTTECC_FILECODE (0XF505) +#define PROC_MEM_TECH_MTTHRC_FILECODE (0XF506) +#define PROC_MEM_TECH_MTTML_FILECODE (0XF507) +#define PROC_MEM_TECH_MTTOPTSRC_FILECODE (0XF509) +#define PROC_MEM_TECH_MTTSRC_FILECODE (0XF50B) +#define PROC_MEM_TECH_MTTEDGEDETECT_FILECODE (0XF50C) +#define PROC_MEM_TECH_DDR3_MT3_FILECODE (0XF581) +#define PROC_MEM_TECH_DDR3_MTOT3_FILECODE (0XF583) +#define PROC_MEM_TECH_DDR3_MTRCI3_FILECODE (0XF584) +#define PROC_MEM_TECH_DDR3_MTSDI3_FILECODE (0XF585) +#define PROC_MEM_TECH_DDR3_MTSPD3_FILECODE (0XF586) +#define PROC_MEM_TECH_DDR3_MTTWL3_FILECODE (0XF587) +#define PROC_MEM_TECH_DDR3_MTTECC3_FILECODE (0XF588) +#define PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE (0XF589) +#define PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE (0XF58A) +#define PROC_MEM_TECH_MTTRDDQS2DTRAINING_FILECODE (0XF58B) +#define PROC_MEM_TECH_MTTRDDQS2DEYERIMSEARCH_FILECODE (0XF58C) + +#define PROC_RECOVERY_MEM_MRDEF_FILECODE (0XF801) +#define PROC_RECOVERY_MEM_MRINIT_FILECODE (0XF802) +#define PROC_RECOVERY_MEM_MRM_FILECODE (0XF803) +#define PROC_RECOVERY_MEM_MRUC_FILECODE (0XF804) +#define PROC_RECOVERY_MEM_TECH_MRTTPOS_FILECODE (0XF8C1) +#define PROC_RECOVERY_MEM_TECH_MRTTSRC_FILECODE (0XF8C2) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRT3_FILECODE (0XF8C3) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE (0XF8C4) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSDI3_FILECODE (0XF8C5) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSPD3_FILECODE (0XF8C6) +#define PROC_RECOVERY_MEM_TECH_DDR3_MRTTWL3_FILECODE (0XF8C7) +#define PROC_RECOVERY_MEM_NB_MRN_FILECODE (0XF8C8) +#define PROC_RECOVERY_MEM_NB_MRNDCT_FILECODE (0XF8C9) +#define PROC_RECOVERY_MEM_NB_MRNMCT_FILECODE (0XF8CA) +#define PROC_RECOVERY_MEM_NB_MRNTRAIN3_FILECODE (0XF8CB) +#define PROC_RECOVERY_MEM_TECH_MRTTHRC_FILECODE (0XF8CC) +#define PROC_RECOVERY_MEM_PS_MRP_FILECODE (0XF8E0) +#define PROC_RECOVERY_MEM_PS_MRPRTT_FILECODE (0XF8E1) +#define PROC_RECOVERY_MEM_PS_MRPODTPAT_FILECODE (0XF8E2) +#define PROC_RECOVERY_MEM_PS_MRPSAO_FILECODE (0XF8E3) +#define PROC_RECOVERY_MEM_PS_MRPMR0_FILECODE (0XF8E4) +#define PROC_RECOVERY_MEM_PS_MRPRC2IBT_FILECODE (0XF8E5) +#define PROC_RECOVERY_MEM_PS_MRPRC10OPSPD_FILECODE (0XF8E6) +#define PROC_RECOVERY_MEM_PS_MRPLRIBT_FILECODE (0XF8E7) +#define PROC_RECOVERY_MEM_PS_MRPLRNPR_FILECODE (0XF8E8) +#define PROC_RECOVERY_MEM_PS_MRPLRNLR_FILECODE (0XF8E9) +#define PROC_RECOVERY_MEM_TECH_MRTTHRCSEEDTRAIN_FILECODE (0XF8FA) +#define PROC_RECOVERY_MEM_NB_ML_MRNDCTML_FILECODE (0XF902) +#define PROC_RECOVERY_MEM_NB_ML_MRNML_FILECODE (0XF903) +#define PROC_RECOVERY_MEM_NB_ML_MRNMCTML_FILECODE (0XF904) +#define PROC_RECOVERY_MEM_NB_ML_MRNPROTOML_FILECODE (0XF905) +#define PROC_RECOVERY_MEM_PS_ML_MRPSML3_FILECODE (0XF906) +#define PROC_RECOVERY_MEM_PS_ML_MRPML3_FILECODE (0XF907) +#define PROC_RECOVERY_MEM_PS_ML_MRPUML3_FILECODE (0XF908) + +//Psp +#define UEFI_PSP_DRIVERS_ITPMDXE_ITPMDXE_FILECODE (0xFA00) +#define UEFI_PSP_DRIVERS_ITPMPEI_ITPMPEI_FILECODE (0xFA01) +#define UEFI_PSP_DRIVERS_PSPP2CMBOX_PSPP2CMBOXCMD_FILECODE (0xFA02) +#define UEFI_PSP_DRIVERS_PSPP2CMBOX_PSPP2CMBOX_FILECODE (0xFA03) +#define UEFI_PSP_DRIVERS_PSPPEI_PSPPEI_FILECODE (0xFA04) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPRESUMEHANDLING_FILECODE (0xFA05) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPRESUMESERVICES_FILECODE (0xFA06) +#define UEFI_PSP_DRIVERS_PSPSMM_PSPSMM_FILECODE (0xFA07) +#define UEFI_PSP_DRIVERS_CSRESUMESMM_CSRESUMESMM_FILECODE (0xFA08) +#define UEFI_PSP_LIBRARY_PSPBASELIB_PSPBASELIB_FILECODE (0xFA09) +#define UEFI_PSP_LIBRARY_PSPMBOX_PSPMBOX_FILECODE (0xFA0A) +#define UEFI_PSP_LIBRARY_SMMLOAD_SMMLOAD_FILECODE (0xFA0B) +#define UEFI_PSP_DRIVERS_PSPDXE_PSPDXE_FILECODE (0xFA0C) +#define UEFI_PSP_LIBRARY_PSPFTPMLIB_PSPFTPMLIB_FILECODE (0xFA0D) +#define UEFI_PSP_LIBRARY_CCPSHALIB_CCPSHALIB_FILECODE (0xFA0E) +#define UEFI_PSP_LIBRARY_CSRESUMESMMLIB_CSRESUMESMMLIB_FILECODE (0xFA0F) +#endif // _FILECODE_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Include/Ids.h b/src/vendorcode/amd/pi/00730F01/Include/Ids.h new file mode 100644 index 0000000000..854b915768 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/Ids.h @@ -0,0 +1,1433 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD IDS Routines + * + * Contains AMD AGESA Integrated Debug Macros + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + + /* Macros to aid debugging */ + /* These definitions expand to zero (0) bytes of code when disabled */ + +#ifndef _IDS_H_ +#define _IDS_H_ + +#undef FALSE +#undef TRUE +#define FALSE 0 +#define TRUE 1 +// Proto type for optionsids.h +typedef UINT32 IDS_STATUS; ///< Status of IDS function. +#define IDS_SUCCESS ((IDS_STATUS) 0x00000000ul) ///< IDS Function is Successful. +#define IDS_UNSUPPORTED ((IDS_STATUS) 0xFFFFFFFFul) ///< IDS Function is not existed. + +#define IDS_STRINGIZE(a) #a ///< for define stringize macro +#ifndef IDS_DEADLOOP + #define IDS_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif +/** + * IDS Option Hook Points + * + * These are the values to indicate hook point in AGESA for IDS Options. + * + */ +typedef enum { //vv- for debug reference only + IDS_INIT_EARLY_BEFORE, ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY. + ///< IDS Object is initialized. + ///< Override CPU Core Leveling Mode. + ///< Set P-State in Post + IDS_INIT_EARLY_AFTER, ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY. + IDS_INIT_LATE_BEFORE, ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE. + ///< It will be used to control the following tables. + ///< ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC) + ///< ACPI SRAT Table + ///< ACPI SLIT Table + ///< ACPI WHEA Table + ///< DMI Table + IDS_INIT_LATE_AFTER, ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE. + IDS_INIT_MID_BEFORE, ///< 04 Option Hook Point before AGESA function AMD_INIT_MID. + IDS_INIT_MID_AFTER, ///< 05 Option Hook Point after AGESA function AMD_INIT_MID. + IDS_INIT_POST_BEFORE, ///< 06 Option Hook Point before AGESA function AMD_INIT_POST. + ///< Control Interleaving and DRAM memory hole + ///< Override the setting of ECC Control + ///< Override the setting of Online Spare Rank + IDS_INIT_POST_AFTER, ///< 07 Option Hook Point after AGESA function AMD_INIT_POST. + IDS_INIT_RESET_BEFORE, ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET. + IDS_INIT_RESET_AFTER, ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET. + IDS_INIT_POST_MID, ///< 0a Option Hook Point after AGESA function AMD_INIT_POST. + IDS_BEFORE_S3_SAVE, ///< 0b override any settings before S3 save. + IDS_BEFORE_S3_RESTORE, ///< 0c override any settings before S3 restore + IDS_AFTER_S3_SAVE, ///< 0d Override any settings after S3 save + IDS_AFTER_S3_RESTORE, ///< 0e Override any settings after S3 restore + IDS_BEFORE_DQS_TRAINING, ///< 0f override any settings before DQS training + IDS_BEFORE_DRAM_INIT, ///< 10 override any settings before Dram initialization + IDS_BEFORE_MEM_FREQ_CHG, ///< 11 override settings before MemClk frequency change + IDS_BEFORE_WARM_RESET , ///< 12 Override PCI or MSR Registers Before Warm Reset + IDS_BEFORE_PCI_INIT, ///< 13 Override PCI or MSR Registers Before PCI Init + IDS_BEFORE_AP_EARLY_HALT, ///< 14 Option Hook Point before AP early halt + IDS_BEFORE_S3_RESUME, ///< 15 Option Hook Point before s3 resume + IDS_AFTER_S3_RESUME, ///< 16 Option Hook Point after s3 resume + IDS_BEFORE_PM_INIT, ///< 17 Option Hook Point Before Pm Init + + IDS_MT_BASE = 0x20, ///< 0x20 ~ 0x38 24 time points reserved for MTTime + + IDS_PLATFORM_RSVD1 = 0x38, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD2 = 0x39, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD3 = 0x3a, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD4 = 0x3b, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD5 = 0x3c, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD6 = 0x3d, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD7 = 0x3e, ///< from 0x38 to 0x3f will reserved for platform used + IDS_PLATFORM_RSVD8 = 0x3f, ///< from 0x38 to 0x3f will reserved for platform used + + // All the above timing point is used by BVM, their value should never be changed + IDS_INIT_DRAM_TABLE, ///< 40 Generate override table for Dram Timing + ///< Dram Controller, Drive Strength and DQS Timing + IDS_GET_DRAM_TABLE, ///< 41 Generate override table for Dram Timing + IDS_GANGING_MODE, ///< 42 override Memory Mode Unganged + IDS_POWERDOWN_MODE, ///< 43 override Power Down Mode + IDS_BURST_LENGTH32, ///< 44 override Burst Length32 + IDS_ALL_MEMORY_CLOCK, ///< 45 override All Memory Clks Enable + IDS_ECC, ///< 46 override ECC parameter + IDS_ECCSYMBOLSIZE, ///< 47 override ECC symbol size + IDS_CPU_Early_Override, ///< 48 override CPU early parameter + IDS_CACHE_FLUSH_HLT, ///< 49 override Cache Flush Hlt + IDS_CHANNEL_INTERLEAVE, ///< 4a override Channel Interleave + IDS_MEM_ERROR_RECOVERY, ///< 4b override memory error recovery + IDS_MEM_RETRAIN_TIMES, ///< 4c override memory retrain times + IDS_MEM_SIZE_OVERLAY, ///< 4d Override the syslimit + IDS_CHECK_NEGATIVE_WL, ///< 4e Check for negative write leveling result + IDS_DLL_SHUT_DOWN, ///< 4f Check for Dll Shut Down + IDS_POR_MEM_FREQ, ///< 50 Entry to enable/disable MemClk frequency enforcement + IDS_PHY_DLL_STANDBY_CTRL, ///< 51 Enable/Disable Phy DLL standby feature + IDS_PLATFORMCFG_OVERRIDE, ///< 52 Hook for Override PlatformConfig structure + IDS_LOADCARD_ERROR_RECOVERY, ///< 53 Special error handling for load card support + IDS_MEM_IGNORE_ERROR, ///< 54 Ignore error and do not do fatal exit in memory + IDS_GNB_SMU_SERVICE_CONFIG, ///< 55 Config GNB SMU service + IDS_GNB_ORBDYNAMIC_WAKE, ///< 56 config GNB dynamic wake + IDS_GNB_PLATFORMCFG_OVERRIDE, ///< 57 override ids gnb platform config + IDS_GNB_LCLK_DPM_EN, ///< 58 override GNB LCLK DPM configuration + IDS_GNB_LCLK_DEEP_SLEEP, ///< 59 override GNB LCLK DPM deep sleep + IDS_GNB_CLOCK_GATING, ///< 5a Override GNB Clock gating config + IDS_NB_PSTATE_DIDVID, ///< 5b Override NB P-state settings + IDS_CPB_CTRL, ///< 5c Config the Core peformance boost feature + IDS_HTC_CTRL, ///< 5d Hook for Hardware Thermal Control + IDS_CC6_WORKAROUND, ///< 5e Hook for skip CC6 work around + IDS_MEM_MR0, ///< 5f Hook for override Memory Mr0 register + IDS_TRAP_TABLE, ///< 60 Hook for add IDS register table to the loop + IDS_NBBUFFERALLOCATIONATEARLY, ///< 61 Hook for override North bridge bufer allocation + IDS_BEFORE_S3_SPECIAL, ///< 62 Hook to bypass S3 special functions + IDS_SET_PCI_REGISTER_ENTRY, ///< 63 Hook to SetRegisterForPciEntry + IDS_ERRATUM463_WORKAROUND, ///< 64 Hook to Erratum 463 workaround + IDS_BEFORE_MEMCLR, ///< 65 Hook before set Memclr bit + IDS_OVERRIDE_IO_CSTATE, ///< 66 Hook for override io C-state setting + IDS_NBPSDIS_OVERRIDE, ///< 67 Hook for override NB pstate disable setting + IDS_NBPS_REG_OVERRIDE, ///< 68 Hook for override Memory NBps reg + IDS_LOW_POWER_PSTATE, ///< 69 Hook for disable Low power_Pstates feature + IDS_CST_CREATE, ///< 6a Hook for create _CST + IDS_CST_SIZE, ///< 6b Hook for get _CST size + IDS_ENFORCE_VDDIO, ///< 6c Hook to override VDDIO + IDS_STRETCH_FREQUENCY_LIMIT, ///< 6d Hook for enforcing memory stretch frequency limit + IDS_INIT_MEM_REG_TABLE, ///< 6e Hook for init memory register table + IDS_SKIP_FUSED_MAX_RATE, ///< 6f Hook to skip fused max rate cap + IDS_FCH_INIT_AT_RESET, ///< 70 Hook for FCH reset parameter + IDS_FCH_INIT_AT_ENV, ///< 71 Hook for FCH ENV parameter + IDS_ENFORCE_PLAT_TABLES, ///< 72 Hook to enforce platform specific tables + IDS_NBPS_MIN_FREQ, ///< 73 Hook for override MIN nb ps freq + IDS_GNB_FORCE_CABLESAFE, ///< 74 Hook for override Force Cable Safe + IDS_SKIP_PM_TRANSITION_STEP, ///< 75 Hook for provide IDS ability to skip this PM step + IDS_GNB_PROPERTY, ///< 76 Hook for GNB Property + IDS_GNB_PCIE_POWER_GATING, ///< 77 Hook for GNB PCIe Power Gating + IDS_MEM_DYN_DRAM_TERM, ///< 78 Hook for Override Dynamic Dram Term + IDS_MEM_DRAM_TERM, ///< 79 Hook for Override Dram Term + IDS_GNB_ALTVDDNB, ///< 7a Hook for Override AltVddNB + IDS_UCODE, ///< 7b Enable or Disable microcode patching + IDS_FAM_REG_GMMX, ///< 7c GMMX register access + IDS_MEMORY_POWER_POLICY, ///< 7d Memory power policy + IDS_GET_STRETCH_FREQUENCY_LIMIT, ///< 7e Hook for enforcing memory stretch frequency limit + IDS_CPU_FEAT, ///< 7f Hook for runtime force cpu feature disable + IDS_AFTER_DCT_PHY_ACCESS, ///< 80 Hook for DctAccessDone check + IDS_FORCE_PHY_TO_M0, ///< 81 Hook to bypass M0 enforcement + IDS_GNB_PMM_SWTJOFFSET, ///< 82 Hook to GNBSWTJOFFSET + IDS_LOCK_DRAM_CFG, ///< 83 Hook to BFLockDramCfg + IDS_BEFORE_GEN2_INIT, ///< 84 Hook to Before Gen2 Init + IDS_BEFORE_GPP_TRAINING, ///< 85 Hook to Before Gpp training + IDS_BEFORE_RECONFIGURATION, ///< 86 Hook to Before Reconfiguration + IDS_BEFORE_GEN3_INIT, ///< 87 Hook to Before Gen3 Init + IDS_BEFORE_POWER_GATING, ///< 88 Hook to Before Power Gating + IDS_AFTER_EARLY_INIT_ONCORE, ///< 89 Hook to after EarlyInit On Core + IDS_GNB_PCIE_PORT_REMAP, ///< 8a Hook to change mapping of PCIe devices + IDS_ECC_CONTROL, ///< 8b Enable/Disable ECC feature + IDS_GNB_PCIE_PHY_ISOLATION, ///< 8c Enable/Disable PCIE PHY ISOLATION + IDS_AFTER_RESTORING_PCI_REG, ///< 8d Hook after restoring PCI register during S3 resume + IDS_MSR_ACCESS_OVERRIDE, ///< 8e Hook to disable MSR access + IDS_REPORT_SMU_FW_VERSION, ///< 8f Hook to report SMU firmware version + IDS_GNB_LOAD_SAMU_PATCH, ///< 90 Hook to Load SAMU patch + IDS_DLLSTAGGERDLY_OVERRIDE, ///< 91 Hook to skip Dll Stagger Delay + IDS_CSAMPLE_TIMER, ///< 92 Hook to override CSampleTimer + IDS_PIPE_THROTTLE, ///< 93 Hook to override PipeThrottle + IDS_GNB_PMM_NATIVEGEN1PLL, ///< 94 Enable/Disable Native Gen1 PLL + IDS_BEFORE_PLAT_TABLES, ///< 95 Hook before processing platform specific tables + IDS_GNB_PCIE_MASTERPLL_SELECTION, ///< 96 Hook to override PCIe Master PLL selection + IDS_GNB_PCIE_PHYLANE_CONFIG, ///< 97 Hook to override PCIe PhyLane configuration + IDS_DSM_LP_SELECTION, ///< 98 Set Dsm low power mode + IDS_GNB_EQUAL_PRESET, ///< 99 Set equalization preset + IDS_GNB_GEN1_LOOPBACK, ///< 9a Override Gen 1 loopback mode + IDS_GNB_SMU_SERVICE_MASK, ///< 9b Override SMU service enablement mask + IDS_BEFORE_HT_MEM_MAP, ///< 9c Hook before mapping memory address space among DCTs + IDS_GNB_GEN3_SETTINGS_OVERRIDE, ///< 9d Hook to override Gen3 Adapt PI Offset Bypass Enable + IDS_GNB_TARGET_TDP, ///< 9e Hook to override Target TDP + IDS_GNB_LOAD_BUILD_OPTIONS, ///< 9f Hook to override gnb build options + IDS_GNB_SMU_BIOS_TABLE, ///< A0 Hook to override gnb smu bios table + IDS_LOW_POWER_RCVR_EN_CTRL, ///< A1 Hook to override LowPowerRcvrEn mode + IDS_OPTION_END ///< A2 End of IDS option +} AGESA_IDS_OPTION; + +#include "OptionsIds.h" +#include "Filecode.h" +#include "IdsPerf.h" + +/* Initialize IDS controls */ +#ifndef IDSOPT_IDS_ENABLED + #define IDSOPT_IDS_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_ENABLED + #define IDSOPT_CONTROL_ENABLED FALSE +#endif + +#ifndef IDSOPT_CONTROL_NV_TO_CMOS + #define IDSOPT_CONTROL_NV_TO_CMOS FALSE +#endif + +#ifndef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE +#endif + +#ifndef IDSOPT_TRACE_USER_OPTIONS + #define IDSOPT_TRACE_USER_OPTIONS TRUE +#endif + +#ifndef IDSOPT_PERF_ANALYSIS + #define IDSOPT_PERF_ANALYSIS FALSE +#endif + +#ifndef IDSOPT_HEAP_CHECKING + #define IDSOPT_HEAP_CHECKING FALSE +#endif + +#ifndef IDSOPT_ASSERT_ENABLED + #define IDSOPT_ASSERT_ENABLED FALSE +#endif + +#ifndef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED FALSE +#endif + +#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE +#endif + +#ifndef IDSOPT_DEBUG_CODE_ENABLED + #define IDSOPT_DEBUG_CODE_ENABLED FALSE +#endif + +#ifndef IDSOPT_IDT_EXCEPTION_TRAP + #define IDSOPT_IDT_EXCEPTION_TRAP FALSE +#endif + +#ifndef IDSOPT_C_OPTIMIZATION_DISABLED + #define IDSOPT_C_OPTIMIZATION_DISABLED FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT TRUE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE +#endif + +#ifndef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IDSOPT_CONTROL_ENABLED + #undef IDSOPT_TRACING_ENABLED + #undef IDSOPT_PERF_ANALYSIS + #undef IDSOPT_HEAP_CHECKING + #undef IDSOPT_ASSERT_ENABLED + #undef IDSOPT_ERROR_TRAP_ENABLED + #undef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + #undef IDSOPT_DEBUG_CODE_ENABLED + #undef IDSOPT_TRACE_USER_OPTIONS + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #undef IDSOPT_TRACING_CONSOLE_RAM + + #define IDSOPT_CONTROL_ENABLED FALSE + #define IDSOPT_TRACING_ENABLED FALSE + #define IDSOPT_PERF_ANALYSIS FALSE + #define IDSOPT_HEAP_CHECKING FALSE + #define IDSOPT_ASSERT_ENABLED FALSE + #define IDSOPT_ERROR_TRAP_ENABLED FALSE + #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE + #define IDSOPT_DEBUG_CODE_ENABLED FALSE + #define IDSOPT_TRACE_USER_OPTIONS FALSE + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable when master token Tracing is set to FALSE +#if (IDSOPT_TRACING_ENABLED == FALSE) || (defined (IDSOPT_CUSTOMIZE_TRACING_SERVICE)) + #undef IDSOPT_TRACING_CONSOLE_HDTOUT + #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE + + #undef IDSOPT_TRACING_CONSOLE_SERIALPORT + #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE + + #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO + #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE + + #undef IDSOPT_TRACING_CONSOLE_RAM + #define IDSOPT_TRACING_CONSOLE_RAM FALSE +#endif + +//Disable Tracing if all support HW layer set to FALSE +#if ((IDSOPT_TRACING_CONSOLE_HDTOUT == FALSE) && (IDSOPT_TRACING_CONSOLE_SERIALPORT == FALSE) && (IDSOPT_TRACING_CONSOLE_REDIRECT_IO == FALSE) && (IDSOPT_TRACING_CONSOLE_RAM == FALSE)) + #ifndef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDSOPT_TRACING_ENABLED + #define IDSOPT_TRACING_ENABLED FALSE + #endif +#endif +/** + * Make a Progress Report to the User. + * + * This Macro is always enabled. The default action is to write the TestPoint value + * to an I/O port. The I/O port is 8 bits in size and the default address is 0x80. + * IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port + * in OptionsIds.h in their build tip. + * + * @param[in] TestPoint The value for display indicating progress + * @param[in,out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + **/ + +#define AGESA_TESTPOINT(TestPoint, StdHeader) IdsAgesaTestPoint ((TestPoint), (StdHeader)) + +#ifndef IDS_DEBUG_PORT + #define IDS_DEBUG_PORT 0x80 +#endif + +/** + * @def STOP_HERE + * (macro) - Causes program to halt. This is @b only for use during active debugging . + * + * Causes the program to halt and display the file number of the source of the + * halt (displayed in decimal). + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + #define STOP_HERE IdsErrorStop (STOP_CODE); +#else + #define STOP_HERE STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds." +#endif + +/** + * @def ASSERT + * Test an assertion that the given statement is True. + * + * The statement is evaluated to a boolean value. If the statement is True, + * then no action is taken (no error). If the statement is False, a error stop + * is generated to halt the program. Used for testing for fatal errors that + * must be resolved before production. This is used to do parameter checks, + * bounds checking, range checks and 'sanity' checks. + * + * @param[in] conditional Assert that evaluating this conditional results in TRUE. + * + **/ +#ifndef ASSERT + #if IDSOPT_ASSERT_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE)); + #else + #define ASSERT(conditional) + #endif +#endif + +#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE + #undef IDSOPT_ERROR_TRAP_ENABLED + #define IDSOPT_ERROR_TRAP_ENABLED TRUE + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) IdsCarCorruptionCheck(StdHeader) +#else + #define IDS_CAR_CORRUPTION_CHECK(StdHeader) +#endif +/** + * @def DEBUG_CODE + * Make the code active when IDSOPT_DEBUG_CODE_ENABLED enable + * + */ +#ifndef DEBUG_CODE + #if IDSOPT_DEBUG_CODE_ENABLED == TRUE + #define DEBUG_CODE(Code) Code + #else + #define DEBUG_CODE(Code) + #endif +#endif + +/** + * @def IDS_ERROR_TRAP + * Trap AGESA Error events with stop code display. + * + * Works similarly to use of "ASSERT (FALSE);" + * + */ +#if IDSOPT_ERROR_TRAP_ENABLED == TRUE + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_ERROR_TRAP IdsErrorStop (STOP_CODE) +#else + #define IDS_ERROR_TRAP +#endif + +///give the extended Macro default value +#ifndef __IDS_EXTENDED__ + #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS + #define IDS_TRACE_DEFAULT (0) + #define IDS_INITIAL_F15_TN_PM_STEP + #define IDS_INITIAL_F15_KV_PM_STEP + #define IDS_INITIAL_F15_CZ_PM_STEP + #define IDS_INITIAL_F16_KB_PM_STEP + #define IDS_INITIAL_F16_ML_PM_STEP + #define IDS_F15_TN_PM_CUSTOM_STEP + #define IDS_F15_KV_PM_CUSTOM_STEP + #define IDS_F15_CZ_PM_CUSTOM_STEP + #define IDS_F16_KB_PM_CUSTOM_STEP + #define IDS_F16_ML_PM_CUSTOM_STEP + #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader) + #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader) + #define IDS_EXTENDED_HEAP_SIZE 0 + #define IDS_EXT_INCLUDE_F15(file) + #define IDS_EXT_INCLUDE(file) + #define IDS_PAD_4K + #define IDS_EXTENDED_CODE(code) + #define SMU_FIRMWARE_PADS_1K +#endif + +#ifndef IDS_NUM_NV_ITEM + #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM) +#endif + +#define IDS_CMOS_INDEX_PORT 0x70 +#define IDS_CMOS_DATA_PORT 0x71 +#define IDS_CMOS_REGION_START 0x20 +#define IDS_CMOS_REGION_END 0x7F +#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) \ + AmdIdsCtrlDispatcher ((IdsOption), (DataPtr), (StdHeader)) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) \ + IdsOptionCallout ((CallOutId), (DataPtr), (StdHeader)) + #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE + #undef IDS_AP_GET_NV_FROM_CMOS + #define IDS_AP_GET_NV_FROM_CMOS(x) AmdIdsApGetNvFromCmos(x) + #ifdef IDS_OPT_CMOS_INDEX_PORT + #undef IDS_CMOS_INDEX_PORT + #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT + #endif + + #ifdef IDS_OPT_CMOS_DATA_PORT + #undef IDS_CMOS_DATA_PORT + #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT + #endif + + #ifdef IDS_OPT_CMOS_REGION_START + #undef IDS_CMOS_REGION_START + #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START + #endif + + #ifdef IDS_OPT_CMOS_REGION_END + #undef IDS_CMOS_REGION_END + #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END + #endif + #endif +#else + #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) + + #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) AGESA_SUCCESS +#endif + +/** + * Macro to add a *skip* hook for IDS options + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, IDS dispatcher function will be called to perform + * the detailed action and to skip AGESA code if necessary. + * + * @param[in] IdsOption IDS Option ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +#if IDSOPT_CONTROL_ENABLED == TRUE + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) \ + if (AmdIdsCtrlDispatcher (IdsOption, DataPtr, StdHeader) == IDS_SUCCESS) +#else + #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) +#endif + +/** + * Macro to add a heap manager routine + * + * when memory is allocated the heap manager actually allocates two extra dwords of data, + * one dword buffer before the actual memory, and one dword afterwards. + * a complete heap walk and check to be performed at any time. + * it would ASSERT if the heap is corrupt + * + * @param[in] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ + +// Heap debug feature +#define SENTINEL_BEFORE_VALUE 0x64616548ul // "Head" +#define SENTINEL_AFTER_VALUE 0x6C696154ul // "Tail" +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_HEAP_CHECKING == TRUE + #define SIZE_OF_SENTINEL 4 + #define NUM_OF_SENTINEL 2 // Before ("Head") and After ("Tail") + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE); + #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE); + #define Heap_Check(stdheader) AmdHeapIntactCheck(stdheader) + #else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) + #endif +#else + #define SIZE_OF_SENTINEL 0 + #define NUM_OF_SENTINEL 0 + #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) + #define SET_SENTINEL_AFTER(NodePtr) + #define Heap_Check(stdheader) +#endif + +/** + * Macro to add IDT for debugging exception. + * + * A debug feature. Adding a 'jmp $' into every exception handler. + * So debugger could use HDT to skip 'jmp $' and execute the iret, + * then they could find which instruction cause the exception. + * + * @param[in] FunctionId IDS Function ID for this hook point + * @param[in, out] DataPtr Data Pointer to override + * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS + * + * + **/ +#if IDSOPT_IDS_ENABLED == TRUE + #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) IdsExceptionTrap (FunctionId, DataPtr, StdHeader) + #else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) + #endif +#else + #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) +#endif + + + //Note a is from 0 to 63 +#define DEBUG_PRINT_SHIFT(a) ((UINT64)1 << a) +//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly +//Memory Masks +#define MEM_SETREG DEBUG_PRINT_SHIFT (0) +#define MEM_GETREG DEBUG_PRINT_SHIFT (1) +#define MEM_FLOW DEBUG_PRINT_SHIFT (2) +#define MEM_STATUS DEBUG_PRINT_SHIFT (3) +#define MEM_UNDEF_BF DEBUG_PRINT_SHIFT (4) +#define MEMORY_TRACE_RSV2 DEBUG_PRINT_SHIFT (5) +#define MEMORY_TRACE_RSV3 DEBUG_PRINT_SHIFT (6) +#define MEMORY_TRACE_RSV4 DEBUG_PRINT_SHIFT (7) +#define MEMORY_TRACE_RSV5 DEBUG_PRINT_SHIFT (8) +#define MEMORY_TRACE_RSV6 DEBUG_PRINT_SHIFT (9) + +//CPU Masks +#define CPU_TRACE DEBUG_PRINT_SHIFT (10) +#define CPU_TRACE_RSV1 DEBUG_PRINT_SHIFT (11) +#define CPU_TRACE_RSV2 DEBUG_PRINT_SHIFT (12) +#define CPU_TRACE_RSV3 DEBUG_PRINT_SHIFT (13) +#define CPU_TRACE_RSV4 DEBUG_PRINT_SHIFT (14) +#define CPU_TRACE_RSV5 DEBUG_PRINT_SHIFT (15) +#define CPU_TRACE_RSV6 DEBUG_PRINT_SHIFT (16) +#define CPU_TRACE_RSV7 DEBUG_PRINT_SHIFT (17) +#define CPU_TRACE_RSV8 DEBUG_PRINT_SHIFT (18) +#define CPU_TRACE_RSV9 DEBUG_PRINT_SHIFT (19) + +//GNB Masks +#define GNB_TRACE DEBUG_PRINT_SHIFT (20) +#define PCIE_MISC DEBUG_PRINT_SHIFT (21) +#define PCIE_PORTREG_TRACE DEBUG_PRINT_SHIFT (22) +#define PCIE_HOSTREG_TRACE DEBUG_PRINT_SHIFT (23) +#define GNB_TRACE_RSV2 DEBUG_PRINT_SHIFT (24) +#define NB_MISC DEBUG_PRINT_SHIFT (25) +#define GNB_TRACE_RSV3 DEBUG_PRINT_SHIFT (26) +#define GFX_MISC DEBUG_PRINT_SHIFT (27) +#define NB_SMUREG_TRACE DEBUG_PRINT_SHIFT (28) +#define GNB_TRACE_RSV1 DEBUG_PRINT_SHIFT (29) + +//Topology Masks +#define TOPO_TRACE DEBUG_PRINT_SHIFT (30) +#define TOPO_TRACE_RSV1 DEBUG_PRINT_SHIFT (31) +#define TOPO_TRACE_RSV2 DEBUG_PRINT_SHIFT (32) +#define TOPO_TRACE_RSV3 DEBUG_PRINT_SHIFT (33) +#define TOPO_TRACE_RSV4 DEBUG_PRINT_SHIFT (34) +#define TOPO_TRACE_RSV5 DEBUG_PRINT_SHIFT (35) +#define TOPO_TRACE_RSV6 DEBUG_PRINT_SHIFT (36) +#define TOPO_TRACE_RSV7 DEBUG_PRINT_SHIFT (37) +#define TOPO_TRACE_RSV8 DEBUG_PRINT_SHIFT (38) +#define TOPO_TRACE_RSV9 DEBUG_PRINT_SHIFT (39) + +//FCH Masks +#define FCH_TRACE DEBUG_PRINT_SHIFT (40) +#define FCH_TRACE_RSV1 DEBUG_PRINT_SHIFT (41) +#define FCH_TRACE_RSV2 DEBUG_PRINT_SHIFT (42) +#define FCH_TRACE_RSV3 DEBUG_PRINT_SHIFT (43) +#define FCH_TRACE_RSV4 DEBUG_PRINT_SHIFT (44) +#define FCH_TRACE_RSV5 DEBUG_PRINT_SHIFT (45) +#define FCH_TRACE_RSV6 DEBUG_PRINT_SHIFT (46) +#define FCH_TRACE_RSV7 DEBUG_PRINT_SHIFT (47) +#define FCH_TRACE_RSV8 DEBUG_PRINT_SHIFT (48) +#define FCH_TRACE_RSV9 DEBUG_PRINT_SHIFT (49) + +//Other Masks +#define MAIN_FLOW DEBUG_PRINT_SHIFT (50) +#define EVENT_LOG DEBUG_PRINT_SHIFT (51) +#define PERFORMANCE_ANALYSE DEBUG_PRINT_SHIFT (52) + +//Ids Masks +#define IDS_TRACE DEBUG_PRINT_SHIFT (53) +#define BVM_TRACE DEBUG_PRINT_SHIFT (54) +#define IDS_TRACE_RSV2 DEBUG_PRINT_SHIFT (55) +#define IDS_TRACE_RSV3 DEBUG_PRINT_SHIFT (56) + +//S3 +#define S3_TRACE DEBUG_PRINT_SHIFT (57) + +//Library function to read/write PCI/MSR registers +#define LIB_PCI_RD DEBUG_PRINT_SHIFT (58) +#define LIB_PCI_WR DEBUG_PRINT_SHIFT (59) + +//AGESA test points +#define TEST_POINT DEBUG_PRINT_SHIFT (60) + +//Reserved for platform log +#define PLAT_RSV1 DEBUG_PRINT_SHIFT (61) +#define PLAT_RSV2 DEBUG_PRINT_SHIFT (62) +#define PLAT_RSV3 DEBUG_PRINT_SHIFT (63) + +#define GNB_TRACE_DEFAULT\ + (\ + GNB_TRACE | PCIE_MISC | NB_MISC | GFX_MISC \ + ) + +#define GNB_TRACE_REG\ + (\ + PCIE_PORTREG_TRACE | PCIE_HOSTREG_TRACE | \ + NB_SMUREG_TRACE | GNB_TRACE_RSV1 \ + ) + +#define GNB_TRACE_ALL\ + (\ + GNB_TRACE_DEFAULT | GNB_TRACE_REG \ + ) + +#define CPU_TRACE_ALL\ + (\ + CPU_TRACE | CPU_TRACE_RSV1 | CPU_TRACE_RSV2 | CPU_TRACE_RSV3 | \ + CPU_TRACE_RSV4 | CPU_TRACE_RSV5 | CPU_TRACE_RSV6 | CPU_TRACE_RSV7 | \ + CPU_TRACE_RSV8 | CPU_TRACE_RSV9\ + ) + +#define MEMORY_TRACE_ALL\ + (\ + MEM_FLOW | MEM_GETREG | MEM_SETREG | MEM_STATUS | \ + MEMORY_TRACE_RSV1 | MEMORY_TRACE_RSV2 | MEMORY_TRACE_RSV3 | MEMORY_TRACE_RSV4 | \ + MEMORY_TRACE_RSV5 | MEMORY_TRACE_RSV6\ + ) + +#define TOPO_TRACE_ALL\ + (\ + TOPO_TRACE | TOPO_TRACE_RSV1 | TOPO_TRACE_RSV2 | TOPO_TRACE_RSV3 | \ + TOPO_TRACE_RSV4 | TOPO_TRACE_RSV5 | TOPO_TRACE_RSV6 | TOPO_TRACE_RSV7 | \ + TOPO_TRACE_RSV8 | TOPO_TRACE_RSV9\ + ) + +#define FCH_TRACE_ALL\ + (\ + FCH_TRACE | FCH_TRACE_RSV1 | FCH_TRACE_RSV2 | FCH_TRACE_RSV3 | \ + FCH_TRACE_RSV4 | FCH_TRACE_RSV5 | FCH_TRACE_RSV6 | FCH_TRACE_RSV7 | \ + FCH_TRACE_RSV8 | FCH_TRACE_RSV9\ + ) + +#define IDS_TRACE_ALL\ + (\ + IDS_TRACE | BVM_TRACE | IDS_TRACE_RSV2 | IDS_TRACE_RSV3\ + ) + +#define OTHER_TRACE_ALL\ + (\ + MAIN_FLOW | EVENT_LOG | PERFORMANCE_ANALYSE\ + ) + + +#define TRACE_MASK_ALL (0xFFFFFFFFFFFFFFFFull) +#ifndef IDS_DEBUG_PRINT_MASK + #define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT | CPU_TRACE_ALL | MEM_FLOW | MEM_STATUS | TOPO_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT) +#endif + +/// if no specific define INIT & EXIT will be NULL +#define IDS_HDT_CONSOLE_INIT(x) +#define IDS_HDT_CONSOLE_EXIT(x) + +/// AGESA tracing service +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef VA_ARGS_SUPPORTED + #if IDSOPT_C_OPTIMIZATION_DISABLED == TRUE + #define IDS_HDT_CONSOLE(f, s, ...) AmdIdsDebugPrint (f, s, __VA_ARGS__) + #else + #pragma warning(disable: 4127) + #define IDS_HDT_CONSOLE(f, s, ...) if (f == MEM_FLOW) AmdIdsDebugPrintMem (s, __VA_ARGS__); \ + else if (f == CPU_TRACE) AmdIdsDebugPrintCpu (s, __VA_ARGS__); \ + else if (f == TOPO_TRACE) AmdIdsDebugPrintTopology (s, __VA_ARGS__); \ + else if (f == GNB_TRACE) AmdIdsDebugPrintGnb (s, __VA_ARGS__); \ + else AmdIdsDebugPrint (f, s, __VA_ARGS__) + #endif + #else + #define IDS_HDT_CONSOLE AmdIdsDebugPrint + #endif + #define CONSOLE AmdIdsDebugPrintAll + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) Code + #define IDS_TIMEOUT_CTL(t) IdsMemTimeOut (t) +#else + #define IDS_HDT_CONSOLE 1 ? (VOID) 0 : AmdIdsDebugPrint + #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) + #define CONSOLE CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds." + #define IDS_TIMEOUT_CTL(t) +#endif + +/// Macros for serial port tracing +#ifdef IDSOPT_SERIAL_PORT + #define IDS_SERIAL_PORT IDSOPT_SERIAL_PORT +#endif + +#ifndef IDS_SERIAL_PORT + #define IDS_SERIAL_PORT 0x3F8 +#endif + +// Macros for redirect IO tracing +#ifdef IDSOPT_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT IDSOPT_DEBUG_PRINT_IO_PORT +#endif + +#ifndef IDS_DEBUG_PRINT_IO_PORT + #define IDS_DEBUG_PRINT_IO_PORT 0x80 +#endif + +#define IDS_DPRAM_BASE 0 +#define IDS_DPRAM_SIZE 0 +///Default policy, shift the old data when buffer full +#define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL FALSE +#if IDSOPT_TRACING_CONSOLE_RAM == TRUE + #ifdef IDSOPT_DPRAM_BASE + #undef IDS_DPRAM_BASE + #define IDS_DPRAM_BASE IDSOPT_DPRAM_BASE + #else + #error "Debug Print Ram Base not specified, please define IDSOPT_DPRAM_BASE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_SIZE + #undef IDS_DPRAM_SIZE + #define IDS_DPRAM_SIZE IDSOPT_DPRAM_SIZE + #else + #error "Debug Print Ram size not specified, please define IDSOPT_DPRAM_SIZE in optionsids.h" + #endif + + #ifdef IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL + #endif +#endif +/** + * Macros to add HDT OUT + * + * The default minimal action is to do nothing and there is no any code to increase. + * For debug environments, the debug information can be displayed in HDT or other + * devices. + * + **/ +#if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE + #undef IDS_HDT_CONSOLE_INIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_INIT(x) AmdIdsHdtOutInit (x) + #define IDS_HDT_CONSOLE_EXIT(x) AmdIdsHdtOutExit (x) + #define IDS_HDT_CONSOLE_S3_EXIT(x) AmdIdsHdtOutS3Exit (x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) AmdIdsHdtOutS3ApExit (x) + + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) AmdIdsHdtOutBufferFlush (x) + #define IDS_HDT_CONSOLE_ASSERT(x) AmdIdsDebugPrintAssert (x) + #define IDS_FUNCLIST_ADDR ScriptFuncList + #define IDS_FUNCLIST_EXTERN() extern SCRIPT_FUNCTION ScriptFuncList[] +#else + #define IDS_HDT_CONSOLE_S3_EXIT(x) + #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) + #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) + #define IDS_HDT_CONSOLE_ASSERT(x) + #define IDS_FUNCLIST_ADDR NULL + #define IDS_FUNCLIST_EXTERN() +#endif + +#if IDSOPT_TRACING_ENABLED == TRUE + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE + #undef IDS_HDT_CONSOLE + #define IDS_HDT_CONSOLE IDSOPT_CUSTOMIZE_TRACING_SERVICE + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT + #undef IDS_HDT_CONSOLE_INIT + #define IDS_HDT_CONSOLE_INIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT (x) + #endif + #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT + #undef IDS_HDT_CONSOLE_EXIT + #define IDS_HDT_CONSOLE_EXIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT (x) + #endif +#endif + +#define IDS_TRACE_SHOW_BLD_OPT_CFG IDSOPT_TRACE_USER_OPTIONS + +#if IDSOPT_PERF_ANALYSIS == TRUE + #include "IdsPerf.h" + #ifdef STOP_CODE + #undef STOP_CODE + #endif + #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \ + ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ + (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) + + #define IDS_PERF_TIMESTAMP(ID, StdHeader) IdsPerfTimestamp (STOP_CODE, ID, (StdHeader)) + #define IDS_PERF_ANALYSE(StdHeader) IdsPerfAnalyseTimestamp (StdHeader) +#else + #define IDS_PERF_TIMESTAMP(ID, StdHeader) + #define IDS_PERF_ANALYSE(StdHeader) +#endif + +///For IDS feat use +#define IDS_FAMILY_ALL 0xFFFFFFFFFFFFFFFFull +#define IDS_BSP_ONLY TRUE +#define IDS_ALL_CORES FALSE + +#define IDS_LATE_RUN_AP_TASK_ID PROC_IDS_LIBRARY_IDSLIB_FILECODE + +#define IDS_CALLOUT_INIT 0x01 ///< The function data of IDS callout function of initialization. + +#define IDS_CALLOUT_GNB_PPFUSE_OVERRIDE 0x83 ///< The function data of IDS callout function of GNB pp fuse table. +#define IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG 0x84 ///< The function data of IDS callout function of GNB integrated table. +#define IDS_CALLOUT_GNB_NB_POWERGATE_CONFIG 0x85 ///< The function data of IDS callout function of GNB NB power gate config. +#define IDS_CALLOUT_GNB_PCIE_POWERGATE_CONFIG 0x86 ///< The function data of IDS callout function of GNB PCIE power gateconfig. +#define IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG 0x87 ///< The function data of IDS callout function of GNB pcie platform config. +#define IDS_CALLOUT_GNB_PCIE_PHY_CONFIG 0x88 ///< The function data of IDS callout function of GNB pcie PHY config. +#define IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE 0x89 ///< The function data of IDS callout function of GNB GMM register override +#define IDS_CALLOUT_FCH_INIT_RESET 0x8A ///< The function data of IDS callout function of FchInitReset +#define IDS_CALLOUT_FCH_INIT_ENV 0x8B ///< The function data of IDS callout function of FchInitEnv. +#define IDS_CALLOUT_POWER_PLAN_INIT 0x8C ///< The function data of IDS callout function of Override Power Plan Init +#define IDS_CALLOUT_GET_PERF_BUFFER 0x8D ///< The function data of IDS callout function of get platform performance buffer. +#define IDS_CALLOUT_GNB_PACKAGE_POWER_CONFIG 0x8E ///< The function data of IDS callout function of Bapm Package Power. +#define IDS_CALLOUT_SMU_PORT80_LOGGING_BUFFER 0x8F ///< The function data of IDS callout function of SMU port80 logging buffer. +#define IDS_CALLOUT_GNB_BEFORE_EARLY_INIT 0x90 ///< The function data of IDS callout function of GNB before early init. +#define IDS_CALLOUT_GNB_SMUBIOSTABLE_OVERRIDE 0x91 ///< The function data of IDS callout function of GNB smu bios table. + +/// Function entry for HDT script to call +typedef struct _SCRIPT_FUNCTION { + UINT32 FuncAddr; ///< Function address in ROM + CHAR8 FuncName[40]; ///< Function name +} SCRIPT_FUNCTION; + +/// Data Structure for Mem ECC parameter override +typedef struct { + IN BOOLEAN CfgEccRedirection; ///< ECC Redirection + IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate + IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate + IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate + IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate + IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate + IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood +} ECC_OVERRIDE_STRUCT; + + + + +/** + * AGESA Test Points + * + * These are the values displayed to the user to indicate progress through boot. + * These can be used in a debug environment to stop the debugger at a specific + * test point: + * For SimNow!, this command + * bi 81 w vb 49 + * will stop the debugger on one of the TracePoints (49 is the TP value in this example). + * + */ +typedef enum { + StartProcessorTestPoints, ///< 00 Entry used for range testing for @b Processor related TPs + + // Memory test points + TpProcMemBeforeMemDataInit, ///< 01 .. Memory structure initialization (Public interface) + TpProcMemBeforeSpdProcessing, ///< 02 .. SPD Data processing (Public interface) + TpProcMemAmdMemAuto, ///< 03 .. Memory configuration (Public interface) + TpProcMemDramInit, ///< 04 .. DRAM initialization + TpProcMemSPDChecking, ///< 05 .. + TpProcMemModeChecking, ///< 06 .. + TpProcMemSpeedTclConfig, ///< 07 .. Speed and TCL configuration + TpProcMemSpdTiming, ///< 08 .. + TpProcMemDramMapping, ///< 09 .. + TpProcMemPlatformSpecificConfig, ///< 0A .. + TPProcMemPhyCompensation, ///< 0B .. + TpProcMemStartDcts, ///< 0C .. + TpProcMemBeforeDramInit, ///< 0D .. (Public interface) + TpProcMemPhyFenceTraining, ///< 0E .. + TpProcMemSynchronizeDcts, ///< 0F .. + TpProcMemSystemMemoryMapping, ///< 10 .. + TpProcMemMtrrConfiguration, ///< 11 .. + TpProcMemDramTraining, ///< 12 .. + TpProcMemBeforeAnyTraining, ///< 13 .. (Public interface) + TpProcMemWriteLevelizationTraining, ///< 14 .. + TpProcMemWlFirstPass, ///< 15 .. Below 800Mhz first pass start + TpProcMemWlSecondPass, ///< 16 .. Above 800Mhz second pass start + TpProcMemWlTrainTargetDimm, ///< 17 .. Target DIMM configured + TpProcMemWlPrepDimms, ///< 18 .. Prepare DIMMS for WL + TpProcMemWlConfigDimms, ///< 19 .. Configure DIMMS for WL + TpProcMemReceiverEnableTraining, ///< 1A .. + TpProcMemRcvrStartSweep, ///< 1B .. Start sweep loop + TpProcMemRcvrSetDelay, ///< 1C .. Set receiver Delay + TpProcMemRcvrWritePattern, ///< 1D .. Write test pattern + TpProcMemRcvrReadPattern, ///< 1E .. Read test pattern + TpProcMemRcvrTestPattern, ///< 1F .. Compare test pattern + TpProcMemRcvrCalcLatency, ///< 20 .. Calculate MaxRdLatency per channel + TpProcMemReceiveDqsTraining, ///< 21 .. + TpProcMemRcvDqsSetDelay, ///< 22 .. Set Write Data delay + TpProcMemRcvDqsWritePattern, ///< 23 .. Write test pattern + TpProcMemRcvDqsStartSweep, ///< 24 .. Start read sweep + TpProcMemRcvDqsSetRcvDelay, ///< 25 .. Set Receive DQS delay + TpProcMemRcvDqsReadPattern, ///< 26 .. Read Test pattern + TpProcMemRcvDqsTstPattern, ///< 27 .. Compare Test pattern + TpProcMemRcvDqsResults, ///< 28 .. Update results + TpProcMemRcvDqsFindWindow, ///< 29 .. Start Find passing window + TpProcMemTransmitDqsTraining, ///< 2A .. + TpProcMemTxDqStartSweep, ///< 2B .. Start write sweep + TpProcMemTxDqSetDelay, ///< 2C .. Set Transmit DQ delay + TpProcMemTxDqWritePattern, ///< 2D .. Write test pattern + TpProcMemTxDqReadPattern, ///< 2E .. Read Test pattern + TpProcMemTxDqTestPattern, ///< 2F .. Compare Test pattern + TpProcMemTxDqResults, ///< 30 .. Update results + TpProcMemTxDqFindWindow, ///< 31 .. Start Find passing window + TpProcMemMaxRdLatencyTraining, ///< 32 .. + TpProcMemMaxRdLatStartSweep, ///< 33 .. Start sweep + TpProcMemMaxRdLatSetDelay, ///< 34 .. Set delay + TpProcMemMaxRdLatWritePattern, ///< 35 .. Write test pattern + TpProcMemMaxRdLatReadPattern, ///< 36 .. Read Test pattern + TpProcMemMaxRdLatTestPattern, ///< 37 .. Compare Test pattern + TpProcMemOnlineSpareInit, ///< 38 .. Online Spare init + TpProcMemBankInterleaveInit, ///< 39 .. Bank Interleave Init + TpProcMemNodeInterleaveInit, ///< 3A .. Node Interleave Init + TpProcMemChannelInterleaveInit, ///< 3B .. Channel Interleave Init + TpProcMemEccInitialization, ///< 3C .. ECC initialization + TpProcMemPlatformSpecificInit, ///< 3D .. Platform Specific Init + TpProcMemBeforeAgesaReadSpd, ///< 3E .. Before callout for "AgesaReadSpd" + TpProcMemAfterAgesaReadSpd, ///< 3F .. After callout for "AgesaReadSpd" + TpProcMemBeforeAgesaHookBeforeDramInit, ///< 40 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeDramInit, ///< 41 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining" + TpProcMemAfterAgesaHookBeforeDQSTraining, ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining" + TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterAgesaHookBeforeExitSelfRef, ///< 45 .. After optional callout "AgesaHookBeforeDramInit" + TpProcMemAfterMemDataInit, ///< 46 .. After MemDataInit + TpProcMemInitializeMCT, ///< 47 .. Before InitializeMCT + TpProcMemLvDdr3, ///< 48 .. Before LV DDR3 + TpProcMemInitMCT, ///< 49 .. Before InitMCT + TpProcMemOtherTiming, ///< 4A.. Before OtherTiming + TpProcMemUMAMemTyping, ///< 4B .. Before UMAMemTyping + TpProcMemSetDqsEccTmgs, ///< 4C .. Before SetDqsEccTmgs + TpProcMemMemClr, ///< 4D .. Before MemClr + TpProcMemOnDimmThermal, ///< 4E .. Before On DIMM Thermal + TpProcMemDmi, ///< 4F .. Before DMI + TpProcMemEnd, ///< 50 .. End of memory code + + // CPU test points + TpProcCpuEntryDmi, ///< 51 .. Entry point CreateDmiRecords + TpProcCpuEntryPstate, ///< 52 .. Entry point GenerateSsdt + TpProcCpuEntryPstateLeveling, ///< 53 .. Entry point PStateLeveling + TpProcCpuEntryPstateGather, ///< 54 .. Entry point PStateGatherData + TpProcCpuEntryWhea, ///< 55 .. Entry point CreateAcpiWhea + TpProcCpuEntrySrat, ///< 56 .. Entry point CreateAcpiSrat + TpProcCpuEntrySlit, ///< 57 .. Entry point CreateAcpiSlit + TpProcCpuProcessRegisterTables, ///< 58 .. Register table processing + TpProcCpuSetBrandID, ///< 59 .. Set brand ID + TpProcCpuLocalApicInit, ///< 5A .. Initialize local APIC + TpProcCpuLoadUcode, ///< 5B .. Load microcode patch + TpProcCpuBeforePMFeatureInit, ///< 5C .. BeforePM feature dispatch point + TpProcCpuPowerMgmtInit, ///< 5D .. Power Management table processing + TpProcCpuEarlyFeatureInit, ///< 5E .. Early feature dispatch point + TpProcCpuCoreLeveling, ///< 5F .. Core Leveling + TpProcCpuApMtrrSync, ///< 60 .. AP MTRR sync up + TpProcCpuPostFeatureInit, ///< 61 .. POST feature dispatch point + TpProcCpuBeforeRelinquishAPsFeatureInit = 0x63, ///< 63 .. Before Relinquishing control of APs feature dispatch point + TpProcCpuBeforeAllocateWheaBuffer, ///< 64 .. Before the WHEA init code calls out to allocate a buffer + TpProcCpuAfterAllocateWheaBuffer, ///< 65 .. After the WHEA init code calls out to allocate a buffer + TpProcCpuBeforeAllocateSratBuffer, ///< 66 .. Before the SRAT init code calls out to allocate a buffer + TpProcCpuAfterAllocateSratBuffer, ///< 67 .. After the SRAT init code calls out to allocate a buffer + TpProcCpuBeforeLocateSsdtBuffer, ///< 68 .. Before the P-state init code calls out to locate a buffer + TpProcCpuAfterLocateSsdtBuffer, ///< 69 .. After the P-state init code calls out to locate a buffer + TpProcCpuBeforeAllocateSsdtBuffer, ///< 6A .. Before the P-state init code calls out to allocate a buffer + TpProcCpuAfterAllocateSsdtBuffer, ///< 6B .. After the P-state init code calls out to allocate a buffer + TpProcCpuEntryCrat, ///< 6C .. Entry point CreateAcpiCrat + TpProcCpuEntryCdit, ///< 6D .. Entry point CreateAcpiCdit + TpProcCpuEntryScs, ///< 6E .. Entry point InitializeScsFeature + + // Topology test points + TpProcTopologyEntry = 0x71, ///< 71 .. Topology Init begin + TpProcTopologyDone = 0x7C, ///< 7C .. Topology Init complete + + // Extended memory test point + TpProcMemSendMRS2 = 0x80, ///< 80 .. Sending MRS2 + TpProcMemSendMRS3, ///< 81 .. Sedding MRS3 + TpProcMemSendMRS1, ///< 82 .. Sending MRS1 + TpProcMemSendMRS0, ///< 83 .. Sending MRS0 + TpProcMemContinPatternGenRead, ///< 84 .. Continuous Pattern Read + TpProcMemContinPatternGenWrite, ///< 85 .. Continuous Pattern Write + TpProcMem2dRdDqsTraining, ///< 86 .. Mem: 2d RdDqs Training begin + TpProcMemBefore2dTrainExtVrefChange,///< 87 .. Mem: Before optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemAfter2dTrainExtVrefChange, ///< 88 .. Mem: After optional callout to platform BIOS to change External Vref during 2d Training + TpProcMemConfigureDCTForGeneral, ///< 89 .. Configure DCT For General use begin + TpProcMemProcConfigureDCTForTraining, ///< 8A .. Configure DCT For training begin + TpProcMemConfigureDCTNonExplicitSeq,///< 8B .. Configure DCT For Non-Explicit + TpProcMemSynchronizeChannels, ///< 8C .. Configure to Sync channels + TpProcMemC6StorageAllocation, ///< 8D .. Allocate C6 Storage + + // Gnb Earlier init + TpGnbEarlierPcieConfigurationInit = 0x90, ///< 90 .. GNB earlier PCIE configuration init + TpGnbEarlierInterface = 0x91, ///< 91 .. GNB earlier interface + // Gnb Early init + TpGnbEarlyInterface = 0x92, ///< 92 .. GNB early interface + TpGnbPcieConfigurationMap, ///< 93 .. GNB early PCIE configuration map + TpGnbPcieEarlyInterface, ///< 94 .. GNB early PCIE interface + //Gnb post init + TpGnbPciePostEarlyInterface = 0x95, ///< 95 .. GNB post early interface + TpGnbGfxConfigPostInterface, ///< 96 .. GNB post GFX config interface + TpGnbGfxPostInterface, ///< 97 .. GNB post GFX interface + // Gnb post after DRAM init + TpGnbPostInterface = 0x98, ///< 98 .. GNB post after DRAM interface + TpGnbPciePostInterface, ///< 99 .. GNB post after DRAM PCIE interface + // Gnb Env init + TpGnbEnvInterface, ///< 9A .. GNB Env Nb interface + TpGnbPcieEnvInterface, ///< 9B .. GNB Env PCIE interface + TpGnbGfxConfigEnvInterface, ///< 9C .. GNB Env GFX Config interface + TpGnbGfxEnvInterface, ///< 9D .. GNB Env GFX interface + // Gnb Mid init + TpGnbGfxConfigMidInterface = 0xA1, ///< A1 .. GNB Mid GFX config interface + TpGnbGfxMidInterface, ///< A2 .. GNB Mid GFX interface + TpPcieMidInterface, ///< A3 .. GNB Mid PCIE interface + TpGnbMidInterface, ///< A4 .. GNB Mid interface + TpNbLclkFeature, ///< A5 .. GNB Mid Nclk feature + TpPciePowerGateFeature, ///< A6 .. GNB Mid pcie power gate feature + TpGnbPcieMaxPayloadInterface, ///< A7 .. GNB Mid pcie max payload interface + TpGnbPcieClkPmInterface, ///< A8 .. GNB Mid pcie clk pm port interface + TpGnbPcieAspmInterface, ///< A9 .. GNB Mid pcie ASPM interface + TpGnbNbIoapicInterface, ///< AA .. GNB Mid IOAPIC interface + // Gnb Late init + TpGnbPcieAlibFeature = 0xAB, ///< AB .. GNB Late pcie ALIB feature + TpGnbIommuIvrsTable, ///< AC .. GNB Late pcie IOMMU + // Gnb S3 Save + TpGnbGfxInitSview = 0xAD, ///< AD .. GNB S3SAVE GFX sview init + TpGnbAlibDispatchFeature = 0xAE, ///< AE .. GNB ALIB dispatch feature + EndGnbTestPoints = 0xAF, ///< AF End of TP range for GNB + + StartFchTestPoints = 0xB0, ///< B0 Entry used for range testing for @b FCH related TPs + TpFchInitResetDispatching, ///< B1 .. FCH InitReset dispatch point + TpFchGppBeforePortTraining, ///< B2 .. Before FCH GPP port training + TpFchGppGen1PortPolling, ///< B3 .. FCH GPP port polling with GEN1 speed + TpFchGppGen2PortPolling, ///< B4 .. FCH GPP port polling with GEN2 speed + TpFchGppAfterPortTraining, ///< B5 .. After FCH GPP port training + TpFchInitEnvDispatching, ///< B6 .. FCH InitEnv dispatch point + TpFchInitMidDispatching, ///< B7 .. FCH InitMid dispatch point + TpFchInitLateDispatching, ///< B8 .. FCH InitLate dispatch point + TpFchGppHotPlugging, ///< B9 .. FCH GPP hot plug event + TpFchGppHotUnplugging, ///< BA .. AFCH GPP hot unplug event + TpFchInitS3EarlyDispatching, ///< BB .. FCH InitS3Early dispatch point + TpFchInitS3LateDispatching, ///< BC .. FCH InitS3Late dispatch point + EndFchTestPoints, ///< BF End of TP range for FCH + + // Interface test points + TpIfAmdInitResetEntry = 0xC0, ///< C0 .. Entry to AmdInitReset + TpIfAmdInitResetExit, ///< C1 .. Exiting from AmdInitReset + TpIfAmdInitRecoveryEntry, ///< C2 .. Entry to AmdInitRecovery + TpIfAmdInitRecoveryExit, ///< C3 .. Exiting from AmdInitRecovery + TpIfAmdInitEarlyEntry, ///< C4 .. Entry to AmdInitEarly + TpIfAmdInitEarlyExit, ///< C5 .. Exiting from AmdInitEarly + TpIfAmdInitPostEntry, ///< C6 .. Entry to AmdInitPost + TpIfAmdInitPostExit, ///< C7 .. Exiting from AmdInitPost + TpIfAmdInitEnvEntry, ///< C8 .. Entry to AmdInitEnv + TpIfAmdInitEnvExit, ///< C9 .. Exiting from AmdInitEnv + TpIfAmdInitMidEntry, ///< CA .. Entry to AmdInitMid + TpIfAmdInitMidExit, ///< CB .. Exiting from AmdInitMid + TpIfAmdInitLateEntry, ///< CC .. Entry to AmdInitLate + TpIfAmdInitLateExit, ///< CD .. Exiting from AmdInitLate + TpIfAmdS3SaveEntry, ///< CE .. Entry to AmdS3Save + TpIfAmdS3SaveExit, ///< CF .. Exiting from AmdS3Save + TpIfAmdInitResumeEntry, ///< D0 .. Entry to AmdInitResume + TpIfAmdInitResumeExit, ///< D1 .. Exiting from AmdInitResume + TpIfAmdS3LateRestoreEntry, ///< D2 .. Entry to AmdS3LateRestore + TpIfAmdS3LateRestoreExit, ///< D3 .. Exiting from AmdS3LateRestore + TpIfAmdLateRunApTaskEntry, ///< D4 .. Entry to AmdS3LateRestore + TpIfAmdLateRunApTaskExit, ///< D5 .. Exiting from AmdS3LateRestore + TpIfAmdReadEventLogEntry, ///< D6 .. Entry to AmdReadEventLog + TpIfAmdReadEventLogExit, ///< D7 .. Exiting from AmdReadEventLog + TpIfAmdGetApicIdEntry, ///< D8 .. Entry to AmdGetApicId + TpIfAmdGetApicIdExit, ///< D9 .. Exiting from AmdGetApicId + TpIfAmdGetPciAddressEntry, ///< DA .. Entry to AmdGetPciAddress + TpIfAmdGetPciAddressExit, ///< DB .. Exiting from AmdGetPciAddress + TpIfAmdIdentifyCoreEntry, ///< DC .. Entry to AmdIdentifyCore + TpIfAmdIdentifyCoreExit, ///< DD .. Exiting from AmdIdentifyCore + TpIfBeforeRunApFromIds, ///< DE .. After IDS calls out to run code on an AP + TpIfAfterRunApFromIds, ///< DF .. After IDS calls out to run code on an AP + TpIfBeforeGetIdsData, ///< E0 .. Before IDS calls out to get IDS data + TpIfAfterGetIdsData, ///< E1 .. After IDS calls out to get IDS data + TpIfBeforeAllocateHeapBuffer, ///< E2 .. Before the heap manager calls out to allocate a buffer + TpIfAfterAllocateHeapBuffer, ///< E3 .. After the heap manager calls out to allocate a buffer + TpIfBeforeDeallocateHeapBuffer, ///< E4 .. Before the heap manager calls out to deallocate a buffer + TpIfAfterDeallocateHeapBuffer, ///< E5 .. After the heap manager calls out to deallocate a buffer + TpIfBeforeLocateHeapBuffer, ///< E6 .. Before the heap manager calls out to locate a buffer + TpIfAfterLocateHeapBuffer, ///< E7 .. After the heap manager calls out to locate a buffer + TpIfBeforeRunApFromAllAps, ///< E8 .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllAps, ///< E9 .. After the BSP calls out to run code on an AP + TpIfBeforeRunApFromAllCore0s, ///< EA .. Before the BSP calls out to run code on an AP + TpIfAfterRunApFromAllCore0s, ///< EB .. After the BSP calls out to run code on an AP + TpIfBeforeAllocateS3SaveBuffer, ///< EC .. Before the S3 save code calls out to allocate a buffer + TpIfAfterAllocateS3SaveBuffer, ///< ED .. After the S3 save code calls out to allocate a buffer + TpIfBeforeAllocateMemoryS3SaveBuffer, ///< EE .. Before the memory S3 save code calls out to allocate a buffer + TpIfAfterAllocateMemoryS3SaveBuffer, ///< EF .. After the memory S3 save code calls out to allocate a buffer + TpIfBeforeLocateS3PciBuffer, ///< F0 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3PciBuffer, ///< F1 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CPciBuffer, ///< F2 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CPciBuffer, ///< F3 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3MsrBuffer, ///< F4 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3MsrBuffer, ///< F5 .. After the memory code calls out to locate a buffer + TpIfBeforeLocateS3CMsrBuffer, ///< F6 .. Before the memory code calls out to locate a buffer + TpIfAfterLocateS3CMsrBuffer, ///< F7 .. After the memory code calls out to locate a buffer + TpReadyToBoot, ///< F8 .. Ready to boot event + // PMU test points + TpProcMemPmuFailed, ///< F9 .. Failed PMU training. + + EndAgesaTps = 0xFF, ///< Last defined AGESA TP +} AGESA_TP; + +///Ids Feat description +typedef enum { + IDS_FEAT_UCODE_UPDATE = 0x0000, ///< Feat for Ucode Update + IDS_FEAT_TARGET_PSTATE, ///< Feat for Target Pstate + IDS_FEAT_POSTPSTATE, ///< Feat for Post Pstate + IDS_FEAT_ECC_CTRL, ///< Feat for Ecc Control + IDS_FEAT_ECC_SYMBOL_SIZE, ///< Feat for Ecc symbol size + IDS_FEAT_DCT_ALLMEMCLK, ///< Feat for all memory clock + IDS_FEAT_DCT_GANGMODE, ///< Feat for Dct gang mode + IDS_FEAT_DCT_BURSTLENGTH, ///< Feat for dct burst length + IDS_FEAT_DCT_POWERDOWN, ///< Feat for dct power down + IDS_FEAT_DCT_DLLSHUTDOWN, ///< Feat for dct dll shut down + IDS_FEAT_HDTOUT, ///< Feat for hdt out + IDS_FEAT_GNB_PLATFORMCFG, ///< Feat for override GNB platform config + IDS_FEAT_CPB_CTRL, ///< Feat for Config the Core peformance boost feature + IDS_FEAT_HTC_CTRL, ///< Feat for Hardware Thermal Control + IDS_FEAT_MEMORY_MAPPING, ///< Feat for Memory Mapping + IDS_FEAT_POWER_POLICY, ///< Feat for Power Policy + IDS_FEAT_NV_TO_CMOS, ///< Feat for Save BSP Nv to CMOS + IDS_FEAT_COMMON, ///< Common Feat + IDS_FEAT_END = 0xFF ///< End of Common feat +} IDS_FEAT; + +///Ids IDT table function ID +typedef enum { + IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000, ///< Function ID for saving IDTR for BSC + IDS_IDT_RESTORE_IDTR_FOR_BSC, ///< Function ID for restoring IDTR for BSC + IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, ///< Function ID for updating exception vector +} IDS_IDT_FUNC_ID; + +typedef IDS_STATUS IDS_COMMON_FUNC ( + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN IDS_NV_ITEM *IdsNvPtr + ); + +typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC; + +/// Data Structure of IDS Feature block +typedef struct _IDS_FAMILY_FEAT_STRUCT { + IDS_FEAT IdsFeat; ///< Ids Feat ID + BOOLEAN IsBsp; ///< swith for Bsp check + AGESA_IDS_OPTION IdsOption; ///< IDS option + UINT64 CpuFamily; ///< + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_FAMILY_FEAT_STRUCT; + + +/// Data Structure of IDS option +typedef struct _IDS_OPTION_STRUCT { + AGESA_IDS_OPTION idsoption; ///< IDS option + PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function +} IDS_OPTION_STRUCT; + +/// Data Structure of IDS option table +typedef struct _IDS_OPTION_STRUCT_TBL { + UINT8 version; ///<Version of IDS option table + UINT16 size; ///<Size of IDS option table + CONST IDS_OPTION_STRUCT *pIdsOptionStruct; ///<pointer to array of structure +} IDS_OPTION_STRUCT_TBL; + +#define IDS_NV_TO_CMOS_LEN_BYTE 1 +#define IDS_NV_TO_CMOS_LEN_WORD 2 +#define IDS_NV_TO_CMOS_LEN_END 0xFF +#define IDS_NV_TO_CMOS_ID_END 0xFFFF + +/// Data struct of set/get NV to/from CMOS +typedef struct _IDS_NV_TO_CMOS { + UINT8 Length; ///< Length of NV + UINT16 IDS_NV_ID; ///< IDS id +} IDS_NV_TO_CMOS; + +IDS_STATUS +AmdIdsCtrlDispatcher ( + IN AGESA_IDS_OPTION IdsOption, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsOptionCallout ( + IN UINTN CallOutId, + IN OUT VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutInit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3Exit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsHdtOutS3ApExit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdIdsDebugPrint ( + IN UINT64 Flag, + IN const CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintTopology ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintCpu ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintMem ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintGnb ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsDebugPrintAll ( + IN CHAR8 *Format, + IN ... + ); + +VOID +AmdIdsHdtOutBufferFlush ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsMemTimeOut ( + IN OUT VOID *DataPtr + ); + +VOID +IdsAgesaTestPoint ( + IN AGESA_TP TestPoint, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +/** + * IDS Backend Function for ASSERT + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + * @retval TRUE No error +**/ +BOOLEAN +IdsAssert ( + IN UINT32 FileCode + ); + +/** + * The engine code for ASSERT MACRO + * + * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that + * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, + * to help distinguish the stop code from a post code loop. + * Additional features may be available if using simulation. + * + * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. + * + */ +BOOLEAN +IdsErrorStop ( + IN UINT32 FileCode + ); + +VOID +IdsDelay ( + IN VOID + ); + +BOOLEAN +AmdHeapIntactCheck ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +IdsCarCorruptionCheck ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +IDS_STATUS +IdsExceptionTrap ( + IN IDS_IDT_FUNC_ID IdsIdtFuncId, + IN VOID *DataPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfTimestamp ( + IN UINT32 LineInFile, + IN UINT32 Description, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +IdsPerfAnalyseTimestamp ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + + +#if IDSOPT_IDS_ENABLED == FALSE + #undef IEM_SKIP_CODE + #undef IEM_INSERT_CODE +#endif +#ifndef IEM_SKIP_CODE + #define IEM_SKIP_CODE(L) +#endif +#ifndef IEM_INSERT_CODE + #define IEM_INSERT_CODE(L, Fn, Parm) +#endif + +#endif // _IDS_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Include/IdsPerf.h b/src/vendorcode/amd/pi/00730F01/Include/IdsPerf.h new file mode 100644 index 0000000000..2067ebb943 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/IdsPerf.h @@ -0,0 +1,141 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Integrated Debug Routines for performance analysis + * + * Contains AMD AGESA debug macros and functions for performance analysis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: IDS + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _IDS_PERFORMANCE_DATA_POINT + + #define _IDS_PERFORMANCE_DATA_POINT + #define IDS_PERF_VERSION 0x00010000ul //version number 0.1.0.0 +/// Time points performance function used + typedef enum { + TP_BEGINPROCAMDINITEARLY = 0x100, ///< BeginProcAmdInitEarly + TP_ENDPROCAMDINITEARLY = 0x101, ///< EndProcAmdInitEarly + TP_BEGINAMDTOPOINITIALIZE = 0x102, ///< BeginAmdTopoInitialize + TP_ENDAMDTOPOINITIALIZE = 0x103, ///< EndAmdTopoInitialize + TP_BEGINGNBINITATEARLIER = 0x104, ///< BeginGnbInitAtEarlier + TP_ENDGNBINITATEARLIER = 0x105, ///< EndGnbInitAtEarlier + TP_BEGINAMDCPUEARLY = 0x106, ///< BeginAmdCpuEarly + TP_ENDAMDCPUEARLY = 0x107, ///< EndAmdCpuEarly + TP_BEGINGNBINITATEARLY = 0x108, ///< BeginGnbInitAtEarly + TP_ENDGNBINITATEARLY = 0x109, ///< EndGnbInitAtEarly + TP_BEGINPROCAMDINITENV = 0x10A, ///< BeginProcAmdInitEnv + TP_ENDPROCAMDINITENV = 0x10B, ///< EndProcAmdInitEnv + TP_BEGININITENV = 0x10C, ///< BeginInitEnv + TP_ENDINITENV = 0x10D, ///< EndInitEnv + TP_BEGINGNBINITATENV = 0x10E, ///< BeginGnbInitAtEnv + TP_ENDGNBINITATENV = 0x10F, ///< EndGnbInitAtEnv + TP_BEGINPROCAMDINITLATE = 0x110, ///< BeginProcAmdInitLate + TP_ENDPROCAMDINITLATE = 0x111, ///< EndProcAmdInitLate + TP_BEGINCREATSYSTEMTABLE = 0x112, ///< BeginCreatSystemTable + TP_ENDCREATSYSTEMTABLE = 0x113, ///< EndCreatSystemTable + TP_BEGINDISPATCHCPUFEATURESLATE = 0x114, ///< BeginDispatchCpuFeaturesLate + TP_ENDDISPATCHCPUFEATURESLATE = 0x115, ///< EndDispatchCpuFeaturesLate + TP_BEGINAMDCPULATE = 0x116, ///< BeginAmdCpuLate + TP_ENDAMDCPULATE = 0x117, ///< EndAmdCpuLate + TP_BEGINGNBINITATLATE = 0x118, ///< BeginGnbInitAtLate + TP_ENDGNBINITATLATE = 0x119, ///< EndGnbInitAtLate + TP_BEGINPROCAMDINITMID = 0x11A, ///< BeginProcAmdInitMid + TP_ENDPROCAMDINITMID = 0x11B, ///< EndProcAmdInitMid + TP_BEGININITMID = 0x11E, ///< BeginInitMid + TP_ENDINITMID = 0x11F, ///< EndInitMid + TP_BEGINGNBINITATMID = 0x120, ///< BeginGnbInitAtMid + TP_ENDGNBINITATMID = 0x121, ///< EndGnbInitAtMid + TP_BEGINPROCAMDINITPOST = 0x122, ///< BeginProcAmdInitPost + TP_ENDPROCAMDINITPOST = 0x123, ///< EndProcAmdInitPost + TP_BEGINGNBINITATPOST = 0x124, ///< BeginGnbInitAtPost + TP_ENDGNBINITATPOST = 0x125, ///< EndGnbInitAtPost + TP_BEGINAMDMEMAUTO = 0x126, ///< BeginAmdMemAuto + TP_ENDAMDMEMAUTO = 0x127, ///< EndAmdMemAuto + TP_BEGINAMDCPUPOST = 0x128, ///< BeginAmdCpuPost + TP_ENDAMDCPUPOST = 0x129, ///< EndAmdCpuPost + TP_BEGINGNBINITATPOSTAFTERDRAM = 0x12A, ///< BeginGnbInitAtPostAfterDram + TP_ENDGNBINITATPOSTAFTERDRAM = 0x12B, ///< EndGnbInitAtPostAfterDram + TP_BEGINPROCAMDINITRESET = 0x12C, ///< BeginProcAmdInitReset + TP_ENDPROCAMDINITRESET = 0x12D, ///< EndProcAmdInitReset + TP_BEGININITRESET = 0x12E, ///< BeginInitReset + TP_ENDINITRESET = 0x12F, ///< EndInitReset + TP_BEGINHTINITRESET = 0x130, ///< BeginHtInitReset + TP_ENDHTINITRESET = 0x131, ///< EndHtInitReset + TP_BEGINPROCAMDINITRESUME = 0x132, ///< BeginProcAmdInitResume + TP_ENDPROCAMDINITRESUME = 0x133, ///< EndProcAmdInitResume + TP_BEGINAMDMEMS3RESUME = 0x134, ///< BeginAmdMemS3Resume + TP_ENDAMDMEMS3RESUME = 0x135, ///< EndAmdMemS3Resume + TP_BEGINDISPATCHCPUFEATURESS3RESUME = 0x136, ///< BeginDispatchCpuFeaturesS3Resume + TP_ENDDISPATCHCPUFEATURESS3RESUME = 0x137, ///< EndDispatchCpuFeaturesS3Resume + TP_BEGINSETCORESTSCFREQSEL = 0x138, ///< BeginSetCoresTscFreqSel + TP_ENDSETCORESTSCFREQSEL = 0x139, ///< EndSetCoresTscFreqSel + TP_BEGINMEMFMCTMEMCLR_INIT = 0x13A, ///< BeginMemFMctMemClr_Init + TP_ENDNMEMFMCTMEMCLR_INIT = 0x13B, ///< EndnMemFMctMemClr_Init + TP_BEGINMEMBEFOREMEMDATAINIT = 0x13C, ///< BeginMemBeforeMemDataInit + TP_ENDMEMBEFOREMEMDATAINIT = 0x13D, ///< EndMemBeforeMemDataInit + TP_BEGINPROCAMDMEMAUTO = 0x13E, ///< BeginProcAmdMemAuto + TP_ENDPROCAMDMEMAUTO = 0x13F, ///< EndProcAmdMemAuto + TP_BEGINMEMMFLOWC32 = 0x140, ///< BeginMemMFlowC32 + TP_ENDMEMMFLOWC32 = 0x141, ///< EndMemMFlowC32 + TP_BEGINMEMINITIALIZEMCT = 0x142, ///< BeginMemInitializeMCT + TP_ENDMEMINITIALIZEMCT = 0x143, ///< EndMemInitializeMCT + TP_BEGINMEMSYSTEMMEMORYMAPPING = 0x144, ///< BeginMemSystemMemoryMapping + TP_ENDMEMSYSTEMMEMORYMAPPING = 0x145, ///< EndMemSystemMemoryMapping + TP_BEGINMEMDRAMTRAINING = 0x146, ///< BeginMemDramTraining + TP_ENDMEMDRAMTRAINING = 0x147, ///< EndMemDramTraining + TP_BEGINMEMOTHERTIMING = 0x148, ///< BeginMemOtherTiming + TP_ENDMEMOTHERTIMING = 0x149, ///< EndMemOtherTiming + TP_BEGINMEMUMAMEMTYPING = 0x14A, ///< BeginMemUMAMemTyping + TP_ENDMEMUMAMEMTYPING = 0x14B, ///< EndMemUMAMemTyping + TP_BEGINMEMMEMCLR = 0x14C, ///< BeginMemMemClr + TP_ENDMEMMEMCLR = 0x14D, ///< EndMemMemClr + TP_BEGINMEMMFLOWTN = 0x14E, ///< BeginMemMFlowTN + TP_ENDMEMMFLOWTN = 0x14F, ///< EndMemMFlowTN + TP_BEGINAGESAHOOKBEFOREDRAMINIT = 0x150, ///< BeginAgesaHookBeforeDramInit + TP_ENDAGESAHOOKBEFOREDRAMINIT = 0x151, ///< EndAgesaHookBeforeDramInit + TP_BEGINPROCMEMDRAMTRAINING = 0x152, ///< BeginProcMemDramTraining + TP_ENDPROCMEMDRAMTRAINING = 0x153, ///< EndProcMemDramTraining + TP_BEGINGNBINITATS3SAVE = 0x154, ///< BeginGnbInitAtS3Save + TP_ENDGNBINITATS3SAVE = 0x155, ///< EndGnbInitAtS3Save + TP_BEGINGNBLOADSCSDATA = 0x156, ///< BeginGnbLoadScsData + TP_ENDGNBLOADSCSDATA = 0x157, ///< EndGnbLoadScsData + TP_BEGINGNBPCIETRAINING = 0x158, ///< BeginGnbPcieTraining + TP_ENDGNBPCIETRAINING = 0x159, ///< EndGnbPcieTraining + TP_BEGINDISPATCHCPUFEATURESS3SAVE = 0x15A, ///< BeginDispatchCpuFeaturesS3Save + TP_ENDDISPATCHCPUFEATURESS3SAVE = 0x15B, ///< EndDispatchCpuFeaturesS3Save + IDS_TP_END ///< End of IDS TP list + } IDS_PERF_DATA; +#endif diff --git a/src/vendorcode/amd/pi/00730F01/Include/Options.h b/src/vendorcode/amd/pi/00730F01/Include/Options.h new file mode 100644 index 0000000000..94a180c626 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/Options.h @@ -0,0 +1,67 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AGESA options structures + * + * Contains options control structures for the AGESA build options + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _OPTIONS_H_ +#define _OPTIONS_H_ + +/** + * Provide topology limits for loops and runtime, based on supported families. + */ +typedef struct { + UINT32 PlatformNumberOfSockets; ///< The limit to the number of processors based on + ///< supported families and other build options. + UINT32 PlatformNumberOfModules; ///< The limit to the number of modules in a processor, based + ///< on supported families. +} OPTIONS_CONFIG_TOPOLOGY; + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; ///< The function id specified. + IMAGE_ENTRY EntryPoint; ///< The corresponding entry point to call. +} DISPATCH_TABLE; + + +#endif // _OPTIONS_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/pi/00730F01/Include/PlatformMemoryConfiguration.h new file mode 100755 index 0000000000..53212b29b7 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/PlatformMemoryConfiguration.h @@ -0,0 +1,516 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Platform Specific Memory Configuration + * + * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: OPTION + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_ +#define _PLATFORM_MEMORY_CONFIGURATION_H_ + +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ +#ifndef PSO_ENTRY + #define PSO_ENTRY UINT8 +#endif + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * PLATFORM SPECIFIC MEMORY DEFINITIONS + *---------------------------------------------------------------------------------------- + */ +/// +/// Memory Speed and DIMM Population Masks +/// +///< DDR Speed Masks +///< Specifies the DDR Speed on a memory channel +/// +#define ANY_SPEED 0xFFFFFFFFul +#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66)) +#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66)) +#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66)) +#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66)) +#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66)) +#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66)) +#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66)) +#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66)) +#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66)) +#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66)) +/// +///< DIMM POPULATION MASKS +///< Specifies the DIMM Population on a channel (can be added together to specify configuration). +///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1 +///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1 +/// +#define ANY_ 0xFF ///< Any dimm configuration the current channel +#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel +#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel +#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel +#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel +#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel +#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel +#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel +#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel +#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel +#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel +#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel +#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel +#define LR_DIMM0 0x0001 ///< Lrdimm in slot 0 on the current channel +#define LR_DIMM1 0x0010 ///< Lrdimm in slot 1 on the current channel +#define LR_DIMM2 0x0100 ///< Lrdimm in slot 2 on the current channel +#define LR_DIMM3 0x1000 ///< Lrdimm in slot 3 on the current channel +#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel +#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel +#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel +#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel +/// +///< CS POPULATION MASKS +///< Specifies the CS Population on a channel (can be added together to specify configuration). +///< ex. CS0 + CS1 : CS0 and CS1 apply to the setting +/// +#define CS_ANY_ 0xFF ///< Any CS configuration +#define CS0_ 0x01 ///< CS0 bit map mask +#define CS1_ 0x02 ///< CS1 bit map mask +#define CS2_ 0x04 ///< CS2 bit map mask +#define CS3_ 0x08 ///< CS3 bit map mask +#define CS4_ 0x10 ///< CS4 bit map mask +#define CS5_ 0x20 ///< CS5 bit map mask +#define CS6_ 0x40 ///< CS6 bit map mask +#define CS7_ 0x80 ///< CS7 bit map mask +/// +///< Number of Dimms on the current channel +///< This is a mask used to indicate the number of dimms in a channel +///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms) +/// +#define ANY_NUM 0xFF ///< Any number of Dimms +#define NO_DIMM 0x00 ///< No Dimms present +#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel +#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel +#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel +#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel + +/// +///< DIMM VOLTAGE MASKS +/// +#define VOLT_ANY_ 0xFF ///< Any voltage configuration +#define VOLT1_5_ 0x01 ///< Voltage 1.5V bit map mask +#define VOLT1_35_ 0x02 ///< Voltage 1.35V bit map mask +#define VOLT1_25_ 0x04 ///< Voltage 1.25V bit map mask + +// +// < Not applicable +// +#define NA_ 0 ///< Not applicable + +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Override Definitions for Socket, Channel and Dimm + * This indicates where a platform override will be applied. + * + *---------------------------------------------------------------------------------------- + */ +/// +///< SOCKET MASKS +///< Indicates associated processor sockets to apply override settings +/// +#define ANY_SOCKET 0xFF ///< Apply to all sockets +#define SOCKET0 0x01 ///< Apply to socket 0 +#define SOCKET1 0x02 ///< Apply to socket 1 +#define SOCKET2 0x04 ///< Apply to socket 2 +#define SOCKET3 0x08 ///< Apply to socket 3 +#define SOCKET4 0x10 ///< Apply to socket 4 +#define SOCKET5 0x20 ///< Apply to socket 5 +#define SOCKET6 0x40 ///< Apply to socket 6 +#define SOCKET7 0x80 ///< Apply to socket 7 +/// +///< CHANNEL MASKS +///< Indicates Memory channels where override should be applied +/// +#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels +#define CHANNEL_A 0x01 ///< Apply to Channel A +#define CHANNEL_B 0x02 ///< Apply to Channel B +#define CHANNEL_C 0x04 ///< Apply to Channel C +#define CHANNEL_D 0x08 ///< Apply to Channel D +/// +/// DIMM MASKS +/// Indicates Dimm Slots where override should be applied +/// +#define ALL_DIMMS 0xFF ///< Apply to all dimm slots +#define DIMM0 0x01 ///< Apply to Dimm Slot 0 +#define DIMM1 0x02 ///< Apply to Dimm Slot 1 +#define DIMM2 0x04 ///< Apply to Dimm Slot 2 +#define DIMM3 0x08 ///< Apply to Dimm Slot 3 +/// +/// REGISTER ACCESS MASKS +/// Not supported as an at this time +/// +#define ACCESS_NB0 0x0 +#define ACCESS_NB1 0x1 +#define ACCESS_NB2 0x2 +#define ACCESS_NB3 0x3 +#define ACCESS_NB4 0x4 +#define ACCESS_PHY 0x5 +#define ACCESS_DCT_XT 0x6 +/// +/// MOTHER BOARD DESIGN LAYERS MASKS +/// Indicates the layer design of mother board +/// +#define LAYERS_4 0x0 +#define LAYERS_6 0x1 +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Overriding Table Definitions + * + *---------------------------------------------------------------------------------------- + */ + +#define PSO_END 0 ///< Table End +#define PSO_CKE_TRI 1 ///< CKE Tristate Map +#define PSO_ODT_TRI 2 ///< ODT Tristate Map +#define PSO_CS_TRI 3 ///< CS Tristate Map +#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel +#define PSO_CLK_SPEED 5 ///< Clock Speed +#define PSO_DIMM_TYPE 6 ///< Dimm Type +#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map +#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket +#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed +#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel +#define PSO_MEM_TECH 11 ///< Channel Memory Type +#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay +#define PSO_RXEN_SEED 13 ///< Hardwared based RxEn seed +#define PSO_NO_LRDIMM_CS67_ROUTING 14 ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs +#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15 ///< Soldered down SODIMM type +#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V +#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17 ///< Min RD/WR dataeye width +#define PSO_CPU_FAMILY_TO_OVERRIDE 18 ///< CPU family signature to tell following PSO macros are CPU family dependent +#define PSO_MAX_SOLDERED_DOWN_DIMMS 19 ///< Max Soldered-down Dimms per channel +#define PSO_MEMORY_POWER_POLICY 20 ///< Memory power policy override +#define PSO_MOTHER_BOARD_LAYERS 21 ///< Mother board layer design + +/*---------------------------------- + * CONDITIONAL PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition Types +#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types +#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block +#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected +#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel +#define PSO_CONDITION_REG 103 // Reserved +#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types +// Action Types +#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types +#define PSO_ACTION_ODT 120 ///< ODT values to override +#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override +#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override +#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override +#define PSO_ACTION_REG 124 // Reserved +#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration +#define PSO_ACTION_MAX 125 ///< End of Action Entry Types +#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types + +/*---------------------------------- + * TABLE DRIVEN PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition descriptor +#define PSO_TBLDRV_CONFIG 200 ///< Configuration Descriptor + +// Overriding entry types +#define PSO_TBLDRV_START 210 ///< Start of Table Driven Overriding Entry Types +#define PSO_TBLDRV_SPEEDLIMIT 210 ///< Speed Limit +#define PSO_TBLDRV_ODT_RTTNOM 211 ///< RttNom +#define PSO_TBLDRV_ODT_RTTWR 212 ///< RttWr +#define PSO_TBLDRV_ODTPATTERN 213 ///< Odt Patterns +#define PSO_TBLDRV_ADDRTMG 214 ///< Address/Timing values +#define PSO_TBLDRV_ODCCTRL 215 ///< ODC Control values +#define PSO_TBLDRV_SLOWACCMODE 216 ///< Slow Access Mode +#define PSO_TBLDRV_MR0_CL 217 ///< MR0[CL] +#define PSO_TBLDRV_MR0_WR 218 ///< MR0[WR] +#define PSO_TBLDRV_RC2_IBT 219 ///< RC2[IBT] +#define PSO_TBLDRV_RC10_OPSPEED 220 ///< RC10[Opearting Speed] +#define PSO_TBLDRV_LRDIMM_IBT 221 ///< LrDIMM IBT +#define PSO_TBLDRV_2D_TRAINING 222 ///< 2D training +#define PSO_TBLDRV_INVALID_TYPE 223 ///< Invalid Type +#define PSO_TBLDRV_END 223 ///< End of Table Driven Overriding Entry Types + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \ + PSO_CPU_FAMILY_TO_OVERRIDE, 4, \ + ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF) + +#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \ + , Bit7Map + +#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_CKE_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map + +#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \ + PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel + +#define NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfSolderedDownDimmsPerChannel) \ + PSO_MAX_SOLDERED_DOWN_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfSolderedDownDimmsPerChannel + +#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \ + PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel + +#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \ + PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket + +#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \ + PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \ + BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24) + +#define DRAM_TECHNOLOGY(SocketID, MemTechType) \ + PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24) + +#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed + +#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \ + Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \ + Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8) + +#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \ + PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \ + PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE + +#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \ + PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE + +#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \ + PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth + +#define MEMORY_POWER_POLICY_OVERRIDE(PowerPolicy) \ + PSO_MEMORY_POWER_POLICY, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, PowerPolicy + +#define MOTHER_BOARD_LAYERS(Layers) \ + PSO_MOTHER_BOARD_LAYERS, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, Layers + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CONDITION_AND \ + PSO_CONDITION_AND, 0 + +#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \ + PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk + +#define COND_SPD(Byte, Mask, Value) \ + PSO_CONDITION_SPD, 3, Byte, Mask, Value + +#define COND_REG(Access, Offset, Mask, Value) \ + PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \ + ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \ + ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF) + +#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \ + PSO_ACTION_ODT, 9, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \ + Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt + +#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \ + PSO_ACTION_ADDRTMG, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF) + +#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \ + PSO_ACTION_ODCCONTROL, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF) + +#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \ + PSO_ACTION_SLEWRATE, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF) + +#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \ + PSO_ACTION_SPEEDLIMIT, 9, \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \ + (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \ + (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \ + (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF) + +/*---------------------------------------------------------------------------------------- + * END OF CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ +/// Configuration sub-descriptors +typedef enum { + CONFIG_GENERAL, ///< CONFIG_GENERAL + CONFIG_SPEEDLIMIT, ///< CONFIG_SPEEDLIMIT + CONFIG_RC2IBT, ///< CONFIG_RC2IBT + CONFIG_DONT_CARE, ///< CONFIG_DONT_CARE +} Config_Type; + +// ==================== +// Configuration Macros +// ==================== +#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \ + PSO_TBLDRV_CONFIG, 9, \ + CONFIG_GENERAL, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF) + +#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \ + PSO_TBLDRV_CONFIG, 7, \ + CONFIG_SPEEDLIMIT, \ + DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm + +#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \ + PSO_TBLDRV_CONFIG, 10, \ + CONFIG_RC2IBT, \ + DimmPerCH, DimmVolt, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + NumOfReg + +//================== +// Overriding Macros +//================== +#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \ + PSO_TBLDRV_SPEEDLIMIT, 6, \ + (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \ + (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \ + (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \ + PSO_TBLDRV_ODT_RTTNOM, 2, \ + TgtCS, RttNom + +#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \ + PSO_TBLDRV_ODT_RTTWR, 2, \ + TgtCS, RttWr + +#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \ + PSO_TBLDRV_ODTPATTERN, 16, \ + ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \ + ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \ + ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \ + ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \ + PSO_TBLDRV_ADDRTMG, 4, \ + ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \ + PSO_TBLDRV_ODCCTRL, 4, \ + ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF) + +#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \ + PSO_TBLDRV_SLOWACCMODE, 1, \ + SlowAccMode + +#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \ + PSO_TBLDRV_RC2_IBT, 2, \ + TgtDimm, IBT + +#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_CL, 3, \ + RegValOfTcl, MR0CL13, MR0CL0 + +#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_MR0_WR, 2, \ + RegValOfTwr, MR0WR + +#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \ + PSO_TBLDRV_CONFIG, 1, \ + CONFIG_DONT_CARE, \ + PSO_TBLDRV_RC10_OPSPEED, 5, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + MR10OPSPEED + +#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \ + PSO_TBLDRV_LRDIMM_IBT, 4, \ + F0RC8, F1RC0, F1RC1, F1RC2 + +#define TBLDRV_CONFIG_ENTRY_2D_TRAINING(Training2dMode) \ + PSO_TBLDRV_2D_TRAINING, 1, \ + Training2dMode + +//============================ +// Macros for removing entries +//============================ +#define INVALID_CONFIG_FLAG 0x8000 + +#define TBLDRV_INVALID_CONFIG \ + PSO_TBLDRV_INVALID_TYPE, 0 + +/*---------------------------------------------------------------------------------------- + * END OF TABLE DRIVEN OVERRIDE MACROS + *---------------------------------------------------------------------------------------- + */ + +#endif // _PLATFORM_MEMORY_CONFIGURATION_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Include/Topology.h b/src/vendorcode/amd/pi/00730F01/Include/Topology.h new file mode 100644 index 0000000000..3c50e34b2f --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Include/Topology.h @@ -0,0 +1,86 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Topology interface definitions. + * + * Contains AMD AGESA internal interface for topology related data which + * is consumed by code other than Topology Services init. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _TOPOLOGY_H_ +#define _TOPOLOGY_H_ + +// Defines for limiting data structure maximum allocation and limit checking. +#define MAX_NODES 1 +#define MAX_SOCKETS MAX_NODES +#define MAX_DIES 1 + +/** + * Socket and Module to Node Map Item. + * Provide the Node Id and core id range for each module in each processor. + */ +typedef struct { + UINT8 Node; ///< The module's Node id. + UINT8 LowCore; ///< The lowest processor core id for this module. + UINT8 HighCore; ///< The highest processor core id for this module. + UINT8 EnabledComputeUnits; ///< The value of Enabled for this processor module. + UINT8 DualCoreComputeUnits; ///< The value of DualCore for this processor module. + UINT8 TripleCoreComputeUnits;///< The value of TripleCore for this processor module. + UINT8 QuadCoreComputeUnits; ///< The value of QuadCore for this processor module. +} SOCKET_DIE_TO_NODE_ITEM; + +/** + * Socket and Module to Node Map. + * This type is a pointer to the actual map, it can be used for a struct item or + * for typecasting a heap buffer pointer. + */ +typedef SOCKET_DIE_TO_NODE_ITEM (*SOCKET_DIE_TO_NODE_MAP)[MAX_SOCKETS][MAX_DIES]; + +/** + * Node id to Socket Die Map Item. + */ +typedef struct { + UINT8 Socket; ///< socket of the processor containing the Node. + UINT8 Die; ///< the module in the processor which is Node. +} NODE_TO_SOCKET_DIE_ITEM; + +/** + * Node id to Socket Die Map. + */ +typedef NODE_TO_SOCKET_DIE_ITEM (*NODE_TO_SOCKET_DIE_MAP)[MAX_NODES]; + +#endif // _TOPOLOGY_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Porting.h b/src/vendorcode/amd/pi/00730F01/Porting.h new file mode 100644 index 0000000000..eb2f0499a6 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Porting.h @@ -0,0 +1,307 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Describes compiler dependencies - to support several compile time environments + * + * Contains compiler environment porting descriptions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Includes + * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 03:16:51 -0600 (Wed, 22 Dec 2010) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _PORTING_H_ +#define _PORTING_H_ + +#if defined (_MSC_VER) + #include <intrin.h> + void _disable (void); + void _enable (void); + #pragma warning(disable: 4103 4001 4733) + #pragma intrinsic (_disable, _enable) + #pragma warning(push) + // ----------------------------------------------------------------------- + // Define a code_seg MACRO + // + #define MAKE_AS_A_STRING(arg) #arg + + #define CODE_GROUP(arg) __pragma (code_seg (MAKE_AS_A_STRING (.t##arg))) + + #define RDATA_GROUP(arg) __pragma (const_seg (MAKE_AS_A_STRING (.d##arg))) + #define FUNC_ATTRIBUTE(arg) __declspec(arg) + //#include <intrin.h> // MS has built-in functions + + #if _MSC_VER < 900 + // ----------------------------------------------------------------------- + // Assume MSVC 1.52C (16-bit) + // + // NOTE: When using MSVC 1.52C use the following command line: + // + // CL.EXE /G3 /AL /O1i /Fa <FILENAME.C> + // + // This will produce 32-bit code in USE16 segment that is optimized for code + // size. + typedef void VOID; + + // Create the universal 32, 16, and 8-bit data types + typedef unsigned long UINTN; + typedef long INT32; + typedef unsigned long UINT32; + typedef int INT16; + typedef unsigned int UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + /// struct for 16-bit environment handling of 64-bit value + typedef struct _UINT64 { + IN OUT UINT32 lo; ///< lower 32-bits of 64-bit value + IN OUT UINT32 hi; ///< highest 32-bits of 64-bit value + } UINT64; + + // Create the Boolean type + #define TRUE 1 + #define FALSE 0 + typedef unsigned char BOOLEAN; + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV __pascal + #define ROMDATA __based( __segname( "_CODE" ) ) + #define _16BYTE_ALIGN __declspec(align(16)) + #define _8BYTE_ALIGN __declspec(align(8)) + #define _4BYTE_ALIGN __declspec(align(4)) + #define _2BYTE_ALIGN __declspec(align(2)) + #define _1BYTE_ALIGN __declspec(align(1)) + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma warning( disable : 4103 ) // Disable '#pragma pack' in .h warning + #pragma pack(1) + + // Disable WORD->BYTE automatic conversion warnings. Example: + // BYTE LocalByte; + // void MyFunc(BYTE val); + // + // MyFunc(LocalByte*2+1); // Warning, automatic conversion + // + // The problem is any time math is performed on a BYTE, it is converted to a + // WORD by MSVC 1.52c, and then when it is converted back to a BYTE, a warning + // is generated. Disable warning C4761 + #pragma warning( disable : 4761 ) + + #else + // ----------------------------------------------------------------------- + // Assume a 32-bit MSVC++ + // + // Disable the following warnings: + // 4100 - 'identifier' : unreferenced formal parameter + // 4276 - 'function' : no prototype provided; assumed no parameters + // 4214 - non standard extension used : bit field types other than int + // 4001 - nonstandard extension 'single line comment' was used + // 4142 - benign redefinition of type for following declaration + // - typedef char INT8 + #if defined (_M_IX86) + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __w64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #define _16BYTE_ALIGN __declspec(align(64)) + #define _8BYTE_ALIGN __declspec(align(8)) + #define _4BYTE_ALIGN __declspec(align(4)) + #define _2BYTE_ALIGN __declspec(align(2)) + #define _1BYTE_ALIGN __declspec(align(1)) + //Support for variadic macros was introduced in Visual C++ 2005. + #if _MSC_VER >= 1400 + #define VA_ARGS_SUPPORTED + #endif + // 64 bit of compiler + #else + #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306 4366) + + #ifndef VOID + typedef void VOID; + #endif + // Create the universal 32, 16, and 8-bit data types + #ifndef UINTN + typedef unsigned __int64 UINTN; + #endif + typedef __int64 INT64; + typedef unsigned __int64 UINT64; + typedef int INT32; + typedef unsigned int UINT32; + typedef short INT16; + typedef unsigned short UINT16; + typedef char INT8; + typedef unsigned char UINT8; + typedef char CHAR8; + typedef unsigned short CHAR16; + + // Create the Boolean type + #ifndef TRUE + #define TRUE 1 + #endif + #ifndef FALSE + #define FALSE 0 + #endif + typedef unsigned char BOOLEAN; + #define _16BYTE_ALIGN __declspec(align(16)) + #define _8BYTE_ALIGN __declspec(align(8)) + #define _4BYTE_ALIGN __declspec(align(4)) + #define _2BYTE_ALIGN __declspec(align(2)) + #define _1BYTE_ALIGN __declspec(align(1)) + // Force tight packing of structures + // Note: Entire AGESA (Project / Solution) will be using pragma pack 1 + #pragma pack(1) + + #define CONST const + #define STATIC static + #define VOLATILE volatile + #define CALLCONV + #define ROMDATA + #endif + #endif + // ----------------------------------------------------------------------- + // End of MS compiler versions + +#elif defined __GNUC__ + + #define IN + #define OUT + #define STATIC static + #define VOLATILE volatile + #define TRUE 1 + #define FALSE 0 +// #undef CONST + #define CONST const + #define ROMDATA + #define CALLCONV + #define _16BYTE_ALIGN __attribute__ ((aligned (16))) + #define _8BYTE_ALIGN __attribute__ ((aligned (8))) + #define _4BYTE_ALIGN __attribute__ ((aligned (4))) + #define _2BYTE_ALIGN __attribute__ ((aligned (2))) + #define _1BYTE_ALIGN __attribute__ ((aligned (1))) + + typedef unsigned char BOOLEAN; + typedef signed char INT8; + typedef signed short INT16; + typedef signed long INT32; + typedef signed long long INT64; + typedef char CHAR8; + typedef unsigned char UINT8; + typedef unsigned short UINT16; + typedef unsigned long UINT32; + typedef unsigned long UINTN; + typedef unsigned long long UINT64; + typedef void VOID; + //typedef unsigned long size_t; + //typedef unsigned int uintptr_t; + //#include <intrin.h> // MingW-w64 library header + +#define CODE_GROUP(arg) +#define RDATA_GROUP(arg) + + //#include <intrin.h> // MingW-w64 library header + //#include <MyIntrinsics.h> // AGESA temp file for GCC until support is added to MinGW + +#pragma pack(1) + +#define FUNC_ATTRIBUTE(arg) __attribute__((arg)) +#define MAKE_AS_A_STRING(arg) #arg +#include <stddef.h> +#include "gcc-intrin.h" + +#include <assert.h> +#include <config.h> +#include <console/console.h> +#include <console/loglevel.h> + +#ifndef NULL + #define NULL ((void *)0) +#endif + +#else + // ----------------------------------------------------------------------- + // Unknown or unsupported compiler + // + #error "Unknown compiler in use" +#endif + +// ----------------------------------------------------------------------- +// Common definitions for all compilers +// + +//Support forward reference construct +#define AGESA_FORWARD_DECLARATION(x) typedef struct _##x x + +// The following are use in conformance to the UEFI style guide +#define IN +#define OUT + +#endif // _PORTING_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/Family/cpuFamRegisters.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/Family/cpuFamRegisters.h new file mode 100644 index 0000000000..c92c57a48b --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/Family/cpuFamRegisters.h @@ -0,0 +1,144 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_FAM_REGISTERS_H_ +#define _CPU_FAM_REGISTERS_H_ + +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +// This define should be equal to the total number of families +// in the cpuFamily enum. +#define MAX_CPU_FAMILIES 64 +#define MAX_CPU_REVISIONS 63 // Max Cpu Revisions Per Family + +// CPU_LOGICAL_ID.Family equates +// Family 15h equates +#define AMD_FAMILY_15_TN 0x0000000000000200ull +#define AMD_FAMILY_TN (AMD_FAMILY_15_TN) +#define AMD_FAMILY_15_RL (AMD_FAMILY_15_TN) +#define AMD_FAMILY_RL (AMD_FAMILY_15_TN) +#define AMD_FAMILY_15_KV 0x0000000000000400ull +#define AMD_FAMILY_KV (AMD_FAMILY_15_KV) +#define AMD_FAMILY_15_CZ 0x0000000000000800ull +#define AMD_FAMILY_CZ (AMD_FAMILY_15_CZ) +#define AMD_FAMILY_15 (AMD_FAMILY_15_TN | AMD_FAMILY_15_KV | AMD_FAMILY_15_CZ) + +// Family 16h equates +#define AMD_FAMILY_16_KB 0x0000000000010000ull +#define AMD_FAMILY_KB AMD_FAMILY_16_KB +#define AMD_FAMILY_16_ML 0x0000000000020000ull +#define AMD_FAMILY_ML AMD_FAMILY_16_ML +#define AMD_FAMILY_16 (AMD_FAMILY_KB | AMD_FAMILY_ML) + +// Family Unknown +#define AMD_FAMILY_UNKNOWN 0x8000000000000000ull + + +// Family 15h CPU_LOGICAL_ID.Revision equates +// ------------------------------------- + + // Family 15h TN steppings +#define AMD_F15_TN_A0 0x0000000000000100ull +#define AMD_F15_TN_A1 0x0000000000000200ull +#define AMD_F15_RL_A1 0x0000000000000400ull + // Family 15h KV steppings +#define AMD_F15_KV_A0 0x0000000000100000ull +#define AMD_F15_KV_A1 0x0000000000200000ull + // Family 15h CZ steppings +#define AMD_F15_CZ_A0 0x0000000001000000ull + // Family 15h Unknown stepping +#define AMD_F15_UNKNOWN 0x8000000000000000ull + +#define AMD_F15_RL_Ax (AMD_F15_RL_A1) +#define AMD_F15_RL_ALL (AMD_F15_RL_Ax) + +#define AMD_F15_TN_Ax (AMD_F15_TN_A0 | AMD_F15_TN_A1) +#define AMD_F15_TN_GT_A0 (AMD_F15_TN_ALL & ~AMD_F15_TN_A0) +#define AMD_F15_TN_ONLY (AMD_F15_TN_Ax) +#define AMD_F15_TN_ALL (AMD_F15_TN_Ax | AMD_F15_RL_ALL) + +#define AMD_F15_KV_Ax (AMD_F15_KV_A0 | AMD_F15_KV_A1) +#define AMD_F15_KV_ALL (AMD_F15_KV_Ax) + +#define AMD_F15_CZ_Ax (AMD_F15_CZ_A0) +#define AMD_F15_CZ_ALL (AMD_F15_CZ_Ax) + +#define AMD_F15_ALL (AMD_F15_TN_ALL | AMD_F15_KV_ALL | AMD_F15_CZ_ALL) + +// Family 16h CPU_LOGICAL_ID.Revision equates +// ------------------------------------- + + // Family 16h KB steppings +#define AMD_F16_KB_A0 0x0000000000000001ull +#define AMD_F16_KB_A1 0x0000000000000002ull + // Family 16h ML steppings +#define AMD_F16_ML_A0 0x0000000000000100ull +#define AMD_F16_ML_A1 0x0000000000000200ull + // Family 16h Unknown stepping +#define AMD_F16_UNKNOWN 0x8000000000000000ull + +#define AMD_F16_KB_Ax (AMD_F16_KB_A0 | AMD_F16_KB_A1) +#define AMD_F16_KB_ALL (AMD_F16_KB_Ax) + +#define AMD_F16_ML_Ax (AMD_F16_ML_A0 | AMD_F16_ML_A1) +#define AMD_F16_ML_ALL (AMD_F16_ML_Ax) +#define AMD_F16_ML_GT_A0 (AMD_F16_ML_ALL & ~AMD_F16_ML_A0) + +#define AMD_F16_ALL (AMD_F16_KB_ALL | AMD_F16_ML_ALL) + +#endif // _CPU_FAM_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/Feature/cpuCacheInit.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/Feature/cpuCacheInit.h new file mode 100644 index 0000000000..86b38b30be --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/Feature/cpuCacheInit.h @@ -0,0 +1,137 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Execution Cache Allocation functions. + * + * Contains code for doing Execution Cache Allocation for ROM space + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_CACHE_INIT_H_ +#define _CPU_CACHE_INIT_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define BSP_STACK_SIZE_64K 65536 +#define BSP_STACK_SIZE_32K 32768 + +#define CORE0_STACK_SIZE 16384 +#define CORE1_STACK_SIZE 4096 + +#define AMD_MTRR_FIX4K_BASE 0x268 +#define AMD_MTRR_VARIABLE_BASE6 0x20C +#define AMD_MTRR_VARIABLE_BASE7 0x20E + +#define WP_IO 0x0505050505050505ull + +#define AGESA_CACHE_SIZE_REDUCED 1 +#define AGESA_CACHE_REGIONS_ACROSS_1MB 2 +#define AGESA_CACHE_REGIONS_ACROSS_4GB 3 +#define AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 4 +#define AGESA_CACHE_START_ADDRESS_LESS_D0000 5 +#define AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 6 +#define AGESA_DEALLOCATE_CACHE_REGIONS 7 + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ +/// Cache-As-Ram Executable region allocation modes +typedef enum { + LimitedByL2Size, ///< Execution space must be allocated from L2 + InfiniteExe, ///< Family can support unlimited Execution space + MaxCarExeMode ///< Used as limit or bounds check +} CAR_EXE_MODE; + +/// Cache Information +typedef struct { + IN UINT32 BspStackSize; ///< Stack size of BSP + IN UINT32 Core0StackSize; ///< Stack size of primary cores + IN UINT32 Core1StackSize; ///< Stack size of all non primary cores + IN UINT32 MemTrainingBufferSize; ///< Memory training buffer size + IN UINT32 SharedMemSize; ///< Shared memory size + IN UINT64 VariableMtrrMask; ///< Mask to apply before variable MTRR writes + IN UINT64 VariableMtrrHeapMask; ///< Mask to apply before variable MTRR writes for use in heap init. + IN UINT64 HeapBaseMask; ///< Mask used for the heap MTRR settings + IN CAR_EXE_MODE CarExeType; ///< Indicates which algorithm to use when allocating EXE space +} CACHE_INFO; + +/// Merged memory region overlap type +typedef enum { + EmptySet, ///< One of the regions is zero length + Disjoint, ///< The two regions do not touch + Adjacent, ///< one region is next to the other, no gap + CommonEnd, ///< regions overlap with a common end point + Extending, ///< the 2nd region is extending the size of the 1st + Contained, ///< the 2nd region is wholely contained inside the 1st + CommonStartContained, ///< the 2nd region is contained in the 1st with a common start + Identity, ///< the two regions are the same + CommonStartExtending, ///< the 2nd region has same start as 1st, but is larger size + NotCombinable ///< the combined regions do not follow the cache block rules +} OVERLAP_TYPE; + +/// Result of merging two memory regions for cache coverage +typedef struct { + IN OUT UINT32 MergedStartAddr; ///< Start address of the merged regions + IN OUT UINT32 MergedSize; ///< Size of the merged regions + OUT UINT32 OverlapAmount; ///< the size of the overlapping section + OUT OVERLAP_TYPE OverlapType; ///< indicates how the two regions overlap +} MERGED_CACHE_REGION; + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ +AGESA_STATUS +AllocateExecutionCache ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr + ); + +#endif // _CPU_CACHE_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuApicUtilities.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuApicUtilities.h new file mode 100644 index 0000000000..536391b862 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuApicUtilities.h @@ -0,0 +1,302 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU APIC related utility functions and structures + * + * Contains code that provides mechanism to invoke and control APIC communication. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_APIC_UTILITIES_H_ +#define _CPU_APIC_UTILITIES_H_ + + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +#define APIC_CTRL_DWORD 0xF +#define APIC_CTRL_REG (APIC_CTRL_DWORD << 4) +#define APIC_CTRL_MASK 0xFF +#define APIC_CTRL_SHIFT 0 + +#define APIC_DATA_DWORD 0x38 +#define APIC_DATA_REG (APIC_DATA_DWORD << 4) + +#define APIC_REMOTE_READ_REG 0xC0 +#define APIC_CMD_LO_REG 0x300 +#define APIC_CMD_HI_REG 0x310 + +// APIC_CMD_LO_REG bits +#define CMD_REG_DELIVERY_STATUS 0x1000 +#define CMD_REG_TO_READ 0x300 +#define CMD_REG_REMOTE_RD_STS_MSK 0x30000ul +#define CMD_REG_REMOTE_DELIVERY_PENDING 0x10000ul +#define CMD_REG_REMOTE_DELIVERY_DONE 0x20000ul +#define CMD_REG_TO_NMI 0x400 + +// ExeFlags bits +#define WAIT_FOR_CORE 0x00000001ul +#define TASK_HAS_OUTPUT 0x00000002ul +#define RETURN_PARAMS 0x00000004ul +#define END_AT_HLT 0x00000008ul +#define PASS_EARLY_PARAMS 0x00000010ul + +// Control Byte Values +// bit 7 indicates the type of message +// 1 - control message +// 0 - launch + APIC ID = message to go +// +#define CORE_UNAVAILABLE 0xFF +#define CORE_IDLE 0xFE +#define CORE_IDLE_HLT 0xFD +#define CORE_ACTIVE 0xFC +#define CORE_NEEDS_PTR 0xFB +#define CORE_NEEDS_DATA_SIZE 0xFA +#define CORE_STS_DATA_READY_1 0xF9 +#define CORE_STS_DATA_READY_0 0xF8 +#define CORE_DATA_FLAGS_READY 0xF7 +#define CORE_DATA_FLAGS_ACKNOWLEDGE 0xF6 +#define CORE_DATA_PTR_READY 0xF5 + +// Macro used to determine the number of dwords to transmit to the AP as input +#define SIZE_IN_DWORDS(sInput) ((UINT32) (((sizeof (sInput)) + 3) >> 2)) + +// IDT table +#define IDT_DESC_PRESENT 0x80 + +#define IDT_DESC_TYPE_LDT 0x02 +#define IDT_DESC_TYPE_CALL16 0x04 +#define IDT_DESC_TYPE_TASK 0x05 +#define IDT_DESC_TYPE_INT16 0x06 +#define IDT_DESC_TYPE_TRAP16 0x07 +#define IDT_DESC_TYPE_CALL32 0x0C +#define IDT_DESC_TYPE_INT32 0x0E +#define IDT_DESC_TYPE_TRAP32 0x0F +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +typedef VOID (*PF_AP_TASK) (AMD_CONFIG_PARAMS *StdHeader); +typedef VOID (*PF_AP_TASK_I) (VOID *, AMD_CONFIG_PARAMS *StdHeader); +typedef VOID (*PF_AP_TASK_C) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef VOID (*PF_AP_TASK_IC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef UINT32 (*PF_AP_TASK_O) (AMD_CONFIG_PARAMS *StdHeader); +typedef UINT32 (*PF_AP_TASK_IO) (VOID *, AMD_CONFIG_PARAMS *StdHeader); +typedef UINT32 (*PF_AP_TASK_OC) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); +typedef UINT32 (*PF_AP_TASK_IOC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *); + +/// Function pointer union representing the eight different +/// types of functions that an AP can be asked to perform. +typedef union { + PF_AP_TASK PfApTask; ///< AMD_CONFIG_PARAMS * input with no output + PF_AP_TASK_I PfApTaskI; ///< VOID * + AMD_CONFIG_PARAMS * input with no output + PF_AP_TASK_C PfApTaskC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output + PF_AP_TASK_IC PfApTaskIC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output + PF_AP_TASK_O PfApTaskO; ///< AMD_CONFIG_PARAMS * input with UINT32 output + PF_AP_TASK_IO PfApTaskIO; ///< VOID * + AMD_CONFIG_PARAMS * input with UINT32 output + PF_AP_TASK_OC PfApTaskOC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output + PF_AP_TASK_IOC PfApTaskIOC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output +} AP_FUNCTION_PTR; + +/// Input structure for ApUtilTransmitBuffer and ApUtilReceiveBuffer +/// containing information about the data transfer from one core +/// to another. +typedef struct { + IN OUT UINT16 DataSizeInDwords; ///< Size of the data to be transferred rounded up to the nearest dword + IN OUT VOID *DataPtr; ///< Pointer to the data + IN UINT32 DataTransferFlags; ///< Flags dictating certain aspects of the data transfer +} AP_DATA_TRANSFER; + +/// Input structure for ApUtilRunCodeOnSocketCore. +typedef struct _AP_TASK { + AP_FUNCTION_PTR FuncAddress; ///< Pointer to the function that the AP will run + AP_DATA_TRANSFER DataTransfer; ///< Data transfer struct for optionally passing data that the AP should use as input to the function + UINT32 ExeFlags; ///< Flags dictating certain aspects of the AP tasking sequence +} AP_TASK; + +/// Input structure for ApUtilWaitForCoreStatus. +typedef struct { + IN UINT8 *Status; ///< Pointer to the 1st element of an array of values to wait for + IN UINT8 NumberOfElements; ///< Number of elements in the array + IN UINT32 RetryCount; ///< Number of remote read cycles to complete before quitting + IN UINT32 WaitForStatusFlags; ///< Flags dictating certain aspects of ApUtilWaitForCoreStatus +} AP_WAIT_FOR_STATUS; + +/// Interrupt Descriptor Table entry +typedef struct { + UINT16 OffsetLo; ///< Lower 16 bits of the interrupt handler routine's offset + UINT16 Selector; ///< Interrupt handler routine's selector + UINT8 Rsvd; ///< Reserved + UINT8 Flags; ///< Interrupt flags + UINT16 OffsetHi; ///< Upper 16 bits of the interrupt handler routine's offset + UINT32 Offset64; ///< High order 32 bits of the handler's offset needed when in 64 bit mode + UINT32 Rsvd64; ///< Reserved +} IDT_DESCRIPTOR; + +/// Structure needed to load the IDTR using the lidt instruction +typedef struct { + UINT16 Limit; ///< Interrupt Descriptor Table size + UINT64 Base; ///< Interrupt Descriptor Table base address +} IDT_BASE_LIMIT; + +#define WAIT_STATUS_EQUALITY 0x00000001ul +#define WAIT_INFINITELY 0 + +// Data Transfer Flags +#define DATA_IN_MEMORY 0x00000001ul + + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ +// These are P U B L I C functions, used by AGESA +UINT8 +ApUtilReadRemoteControlByte ( + IN UINT32 TargetApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilWriteControlByte ( + IN UINT8 Value, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT32 +ApUtilReadRemoteDataDword ( + IN UINT32 TargetApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilWriteDataDword ( + IN UINT32 Value, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT32 +ApUtilRunCodeOnSocketCore ( + IN UINT8 Socket, + IN UINT8 Core, + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT8 +ApUtilWaitForCoreStatus ( + IN UINT32 TargetApicId, + IN AP_WAIT_FOR_STATUS *WaitParamsPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApEntry ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams + ); + +UINT32 +ApUtilTaskOnExecutingCore ( + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader, + IN VOID *ConfigParams + ); + +VOID +ApUtilTransmitBuffer ( + IN UINT8 Socket, + IN UINT8 Core, + IN AP_DATA_TRANSFER *BufferInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +ApUtilReceiveBuffer ( + IN UINT8 Socket, + IN UINT8 Core, + IN OUT AP_DATA_TRANSFER *BufferInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetLocalApicIdForCore ( + IN UINT32 TargetSocket, + IN UINT32 TargetCore, + OUT UINT32 *LocalApicId, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +ApUtilRunCodeOnAllLocalCoresAtEarly ( + IN AP_TASK *TaskPtr, + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr + ); + +VOID +RelinquishControlOfAllAPs ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetCsSelector ( + IN UINT16 *Selector, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +SetIdtr ( + IN IDT_BASE_LIMIT *IdtInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetIdtr ( + IN IDT_BASE_LIMIT *IdtInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif /* _CPU_APIC_UTILITIES_H_ */ + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuEarlyInit.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuEarlyInit.h new file mode 100644 index 0000000000..f0e49b786b --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuEarlyInit.h @@ -0,0 +1,289 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Reset API, and related functions and structures. + * + * Contains code that initialized the CPU after early reset. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_EARLY_INIT_H_ +#define _CPU_EARLY_INIT_H_ + + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ +AGESA_FORWARD_DECLARATION (CPU_CORE_LEVELING_FAMILY_SERVICES); + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +#define CPU_BRAND_ID_LENGTH 48 // Total number of characters supported +#define LOW_NODE_DEVICEID 24 +#define NB_CAPABILITIES 0xE8 //Function 3 Registers +//---------------------------------------------------------------------------- +// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/* All lengths are in bytes */ +#define MICROCODE_TRIADE_SIZE 28 +#define MICROCODE_HEADER_LENGTH 64 + +/** + * @page ucodeflag Microcode Patches Signature Guide + * + * We mark patches in the ROM with a signature so that they can be easily found + * + * @anchor Microcode Patch Signature + * @li @e Microcode Patch Signature @n + * Microcode patches are marked by adding a signature before patches in the ROM image to + * help identify where they are located. + * There're two kind of signatures. One is '$UCODE2K', it indicates there's a following patch with 2K size. + * The other is '$UCODE4K', it indicates there's a following patch with 4K size. + * If you want to know the patch level / equivalent ID, please consult the BKDG for patch header format. + * + * + */ +/// Microcode patch flag for replacement +typedef struct { + IN UINT8 MicrocodePatchesFlag[8]; ///< a flag followed by microcode +} MICROCODE_PATCHES_FLAG; + +#define UCODE_2K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '2', 'K'}}; +#define UCODE_4K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '4', 'K'}}; +#define UCODE_VS_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', 'V', 'S'}}; + +/* Offsets in UCODE PATCH Header */ +/* Note: Header is 64 bytes */ +#define DATE_CODE_OFFSET 0 // 4 bytes +#define PATCH_ID 4 // 4 bytes +#define MICROCODE_PATH_DATA_ID 8 // 2 bytes +#define MICROCODE_PATCH_DATA_LENGTH 10 // 1 byte +#define MICROCODE_PATCH_DATA_CHECKSUM 12 // 4 bytes +#define CHIPSET_1_DEVICE_ID 16 // 4 bytes +#define CHIPSET_2_DEVICE_ID 20 // 4 bytes +#define PROCESSOR_REV_ID 24 // 2 bytes +#define CHIPSET_1_REV_ID 26 // 1 byte +#define CHIPSET_2_REV_ID 27 // 1 byte + +#define MICROCODE_PATCH_2K_SIZE 2048 +#define MICROCODE_PATCH_4K_SIZE 4096 +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// A structure representing BrandId[15:0] from +/// CPUID Fn8000_0001_EBX +typedef struct { + UINT8 String1:4; ///< An index to a string value used to create the name string + UINT8 String2:4; ///< An index to a string value used to create the name string + UINT8 Page:1; ///< An index to the appropriate page for the String1, String2, and Model values + UINT8 Model:7; ///< A field used to create the model number in the name string + UINT8 Socket:4; ///< Specifies the package type + UINT8 Cores:4; ///< Identifies how many physical cores are present +} AMD_CPU_BRAND_DATA; + +/// A structure containing string1 and string2 values +/// as well as information pertaining to their usage +typedef struct { + IN UINT8 Cores; ///< Appropriate number of physical cores + IN UINT8 Page; ///< This string's page number + IN UINT8 Index; ///< String index + IN UINT8 Socket; ///< Package type information + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 Stringlength; ///< Number of characters in the string +} AMD_CPU_BRAND; + +/// An entire CPU brand table. +typedef struct { + UINT8 NumberOfEntries; ///< The number of entries in the table. + CONST AMD_CPU_BRAND *Table; ///< The table entries. +} CPU_BRAND_TABLE; + +//---------------------------------------------------------------------------- +// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Microcode patch field definitions +typedef struct { + UINT32 DateCode; ///< Date of patch creation + UINT32 PatchID; ///< Patch level + UINT16 MicrocodePatchDataID; ///< Internal use only + UINT8 MicrocodePatchDataLength; ///< Internal use only + UINT8 InitializationFlag; ///< Internal use only + UINT32 MicrocodePatchDataChecksum; ///< Doubleword sum of data block + UINT32 Chipset1DeviceID; ///< Device ID of 1st Chipset device to match + UINT32 Chipset2DeviceID; ///< Device ID of 2nd Chipset device to match + UINT16 ProcessorRevisionID; ///< Equivalent ID + UINT8 Chipset1RevisionID; ///< Revision level of 1st Chipset device to match + UINT8 Chipset2RevisionID; ///< Revision level of 2nd Chipset device to match + UINT8 BiosApiRevision; ///< BIOS INT 15 API revision required + UINT8 Reserved1[3]; ///< Reserved + UINT32 MatchRegister0; ///< Internal use only + UINT32 MatchRegister1; ///< Internal use only + UINT32 MatchRegister2; ///< Internal use only + UINT32 MatchRegister3; ///< Internal use only + UINT32 MatchRegister4; ///< Internal use only + UINT32 MatchRegister5; ///< Internal use only + UINT32 MatchRegister6; ///< Internal use only + UINT32 MatchRegister7; ///< Internal use only + UINT8 PatchDataBlock[896]; ///< Raw patch data + UINT8 Reserved2[896]; ///< Reserved + UINT8 X86CodePresent; ///< Boolean to determine if executable code exists + UINT8 X86CodeEntry[191]; ///< Code to execute if X86CodePresent != 0 +} MICROCODE_PATCH; + +/// Two kilobyte array containing the raw +/// microcode patch binary data +typedef struct { + IN UINT8 MicrocodePatches[MICROCODE_PATCH_2K_SIZE]; ///< 2k UINT8 elements +} MICROCODE_PATCHES; + +/// Four kilobyte array containing the raw +/// microcode patch binary data +typedef struct { + IN UINT8 MicrocodePatches[MICROCODE_PATCH_4K_SIZE]; ///< 4k UINT8 elements +} MICROCODE_PATCHES_4K; + +/** + * Set down core register + * + * @CpuServiceInstances + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] Socket Socket ID. + * @param[in] Module Module ID in socket. + * @param[in] LeveledCores Number of core. + * @param[in] CoreLevelMode Core level mode. + * @param[in] StdHeader Header for library and services. + * + * @retval TRUE Down Core register is updated. + * @retval FALSE Down Core register is not updated. + */ +typedef BOOLEAN (F_CPU_SET_DOWN_CORE_REGISTER) ( + IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices, + IN UINT32 *Socket, + IN UINT32 *Module, + IN UINT32 *LeveledCores, + IN CORE_LEVELING_TYPE CoreLevelMode, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Reference to a method +typedef F_CPU_SET_DOWN_CORE_REGISTER *PF_CPU_SET_DOWN_CORE_REGISTER; + +/** + * Provide the interface to the Core Leveling Family Specific Services. + * + * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!). + * Each supported Family must provide an implementation for all methods in this interface, even if the + * implementation is a CommonReturn(). + */ +struct _CPU_CORE_LEVELING_FAMILY_SERVICES { // See Forward Declaration above + UINT16 Revision; ///< Interface version + // Public Methods. + PF_CPU_SET_DOWN_CORE_REGISTER SetDownCoreRegister; ///< Method: Set down core register. +}; + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +// These are P U B L I C functions, used by IBVs +AGESA_STATUS +AmdCpuEarly ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +// These are P U B L I C functions, used by AGESA +AGESA_STATUS +PmInitializationAtEarly ( + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +LoadMicrocodePatch ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +GetPatchEquivalentId ( + IN OUT UINT16 *ProcessorEquivalentId, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +ValidateMicrocode ( + IN MICROCODE_PATCH *MicrocodePatchPtr, + IN UINT16 ProcessorEquivalentId, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetMicrocodeVersion ( + OUT UINT32 *pMicrocodeVersion, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +AmdCpuEarlyInitializer ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr + ); + +VOID +McaInitialization ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif // _CPU_EARLY_INIT_H_ + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuLateInit.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuLateInit.h new file mode 100644 index 0000000000..da698d0b54 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuLateInit.h @@ -0,0 +1,1140 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Late Init API functions Prototypes. + * + * Contains code for doing any late CPU initialization + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_LATE_INIT_H_ +#define _CPU_LATE_INIT_H_ + +#include "Filecode.h" + +// Forward declaration needed for multi-structure mutual references. +AGESA_FORWARD_DECLARATION (PROC_FAMILY_TABLE); +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +//---------------------------------------------------------------------------- +// DMI DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AP_LATE_TASK_GET_TYPE4_TYPE7 (PROC_CPU_FEATURE_CPUDMI_FILECODE) +// SMBIOS constant definition +#define CENTRAL_PROCESSOR 0x03 +#define EXTERNAL_CLOCK_DFLT 200 +#define EXTERNAL_CLOCK_100MHZ 100 +#define P_FAMILY_UNKNOWN 0x02 +#define P_ENGINEERING_SAMPLE 0x00 +#define P_CHARACTERISTICS 0x4 +#define CACHE_CFG_L1 0x180 +#define CACHE_CFG_L2 0x181 +#define CACHE_CFG_L3 0x182 +#define SRAM_TYPE 0x10 +#define ERR_CORRECT_TYPE 0x06 +#define CACHE_TYPE 0x05 +#define DMI_ASSOCIATIVE_OTHER 0x01 +#define DMI_ASSOCIATIVE_UNKNOWN 0x02 +#define DMI_ASSOCIATIVE_DIRECT_MAPPED 0x03 +#define DMI_ASSOCIATIVE_2_WAY 0x04 +#define DMI_ASSOCIATIVE_4_WAY 0x05 +#define DMI_ASSOCIATIVE_FULLY 0x06 +#define DMI_ASSOCIATIVE_8_WAY 0x07 +#define DMI_ASSOCIATIVE_16_WAY 0x08 +#define DMI_ASSOCIATIVE_12_WAY 0x09 +#define DMI_ASSOCIATIVE_24_WAY 0x0A +#define DMI_ASSOCIATIVE_32_WAY 0x0B +#define DMI_ASSOCIATIVE_48_WAY 0x0C +#define DMI_ASSOCIATIVE_64_WAY 0x0D +#define DMI_ASSOCIATIVE_20_WAY 0x0E +#define SOCKET_POPULATED 0x40 +#define CPU_STATUS_UNKNOWN 0x00 +#define CPU_STATUS_ENABLED 0x01 + +// Processor Upgrade Definition +#define P_UPGRADE_UNKNOWN 0x02 +#define P_UPGRADE_NONE 0x06 +#define P_UPGRADE_S1GX 0x16 +#define P_UPGRADE_AM2 0x17 +#define P_UPGRADE_F1207 0x18 +#define P_UPGRADE_G34 0x1A +#define P_UPGRADE_AM3 0x1B +#define P_UPGRADE_C32 0x1C +#define P_UPGRADE_FS1 0x27 +#define P_UPGRADE_FM1 0x29 +#define P_UPGRADE_FM2 0x2A + +//---------------------------------------------------------------------------- +// SRAT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define NorthbridgeCapabilities 0xE8 +#define DRAMBase0 0x40 +#define MMIOBase0 0x80 +#define TOP_MEM 0xC001001Aul +#define LOW_NODE_DEVICEID 24 +#define LOW_APICID 0 + + +// Miscellaneous AMD related values +#define MAX_NUMBER_NODES 8 + +// Flags +#define ENABLED 1 // Bit 0 +#define DISABLED 0 // Bit 0 +#define HOTPLUGGABLE 2 // Bit 1 + +// Affinity Entry Structures +#define AE_APIC 0 +#define AE_MEMORY 1 + + +// Memory Types +#define TYPE_MEMORY 1 +#define TYPE_RESERVED 2 +#define TYPE_ACPI 3 +#define TYPE_NVS 4 + +//---------------------------------------------------------------------------- +// SLIT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AMD_ACPI_SLIT_SOCKET_NUM_LENGTH 8 + +//---------------------------------------------------------------------------- +// CDIT DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +#define AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH 4 // Num domains is a 4-bytes unsigned integer + + +//---------------------------------------------------------------------------- +// P-STATE DEFINITIONS AND MACROS +// +//---------------------------------------------------------------------------- +//------------------------------------- +// ERROR Codes +//------------------------------------- +#define NO_ERROR 0x0 +#define USER_DISABLE_ERROR 0x01 // User disabled SSDT generation +#define CORES_MISSMATCH_PSS_ERROR 0x02 // No PSS match +#define PNOW_SUPPORT_ERROR 0x04 // One of the Cores do not support PNOW! +#define PWR_FREQ_MATCH_ERROR 0x08 // FREQ and PWR mismatch +#define NO_PSS_SIZE_ERROR 0x10 // Error in PSS Size +#define INVALID_PSTATE_ERROR 0x20 // Invalid Max or only 1 P-State available +#define NO_PSS_ENTRY 0x0FFFFul +#define INVALID_FREQ 0x0FFFFFFFFul + +//------------------------- +// Default definitions +// AMD BKDG default values +//------------------------- +#define DEFAULT_ISOCH_RELIEF_TIME IRT_80uS +#define DEFAULT_RAMP_VOLTAGE_OFFSET RVO_50mV +#define DEFAULT_MAX_VOLTAGE_STEP MVS_25mV +#define DEFAULT_PERF_PRESENT_CAP 0 // default for Desktop +#define DEFAULT_VOLTAGE_STABLE_TIME (100 / 20) // 100uS +#define DEFAULT_PLL_LOCK_TIME 2 // 2uS +#define DEFAULT_TRANSITION_LATENCY 100 // 100uS +#define DEFAULT_BUS_MASTER_LATENCY 9 // 9uS +#define DEFAULT_CPU_SCOPE_NUMBER "0UPC" + +// Defines for Common ACPI +// ----------------------------- +#define SCOPE_OPCODE 0x10 +#define NAME_OPCODE 0x08 +#define METHOD_OPCODE 0x14 +#define PACKAGE_OPCODE 0x12 +#define BUFFER_OPCODE 0x11 +#define BYTE_PREFIX_OPCODE 0x0A +#define WORD_PREFIX_OPCODE 0x0B +#define DWORD_PREFIX_OPCODE 0x0C +#define RETURN_OPCODE 0xA4 +#define ACPI_BUFFER 0x080A0B11ul + +// Generic Register Descriptor (GDR) Fields +#define GDR_ASI_SYSTEM_IO 0x01 // Address Space ID +#define GDR_ASZ_BYTE_ACCESS 0x01 // Address Size + +// Defines for ACPI Scope Table +// ---------------------------- +#define SCOPE_LENGTH (SCOPE_STRUCT_SIZE + \ + PCT_STRUCT_SIZE + \ + PSS_HEADER_STRUCT_SIZE + \ + PSS_BODY_STRUCT_SIZE + \ + PPC_HEADER_BODY_STRUCT_SIZE) +#define SCOPE_VALUE1 0x5C +#define SCOPE_VALUE2 0x2E +#define SCOPE_NAME__ '_' +#define SCOPE_NAME_P 'P' +#define SCOPE_NAME_R 'R' +#define SCOPE_NAME_S 'S' +#define SCOPE_NAME_B 'B' +#define SCOPE_NAME_C 'C' +#define SCOPE_NAME_U 'U' +#define SCOPE_NAME_0 '0' +#define SCOPE_NAME_1 '1' +#define SCOPE_NAME_2 '2' +#define SCOPE_NAME_3 '3' +#define SCOPE_NAME_A 'A' + +#ifdef OEM_SCOPE_NAME + #if (OEM_SCOPE_NAME > 'Z') || (OEM_SCOPE_NAME < 'A') + #error "OEM_SCOPE_NAME: it should be only one char long AND a valid letter (A~Z)" + #endif + #define SCOPE_NAME_VALUE OEM_SCOPE_NAME +#else + #define SCOPE_NAME_VALUE SCOPE_NAME_C +#endif // OEM_SCOPE_NAME + +#ifdef OEM_SCOPE_NAME1 + #if (!(((OEM_SCOPE_NAME1 >= 'A') && (OEM_SCOPE_NAME1 <= 'Z')) || \ + ((OEM_SCOPE_NAME1 >= '0') && (OEM_SCOPE_NAME1 <= '9')) || \ + (OEM_SCOPE_NAME1 == '_'))) + #error "OEM_SCOPE_NAME1: it should be only one char long AND a valid letter (0~9, A~F)" + #endif + #define SCOPE_NAME_VALUE1 OEM_SCOPE_NAME1 +#else + #define SCOPE_NAME_VALUE1 SCOPE_NAME_0 +#endif // OEM_SCOPE_NAME + +// Defines for PCT Control and Status Table +// ---------------------------------------- +#define PCT_NAME__ '_' +#define PCT_NAME_P 'P' +#define PCT_NAME_C 'C' +#define PCT_NAME_T 'T' +#define PCT_VALUE1 0x11022C12ul +#define PCT_VALUE2 0x0A14 +#define PCT_VALUE3 0x11 +#define GENERIC_REG_DESCRIPTION 0x82 +#define PCT_LENGTH 0x0C +#define PCT_ADDRESS_SPACE_ID 0x7F +#define PCT_REGISTER_BIT_WIDTH 0x40 +#define PCT_REGISTER_BIT_OFFSET 0x00 +#define PCT_RESERVED 0x00 +#define PCT_CONTROL_REG_LO 0xC0010062ul +#define PCT_CONTROL_REG_HI 0x00 +#define PCT_VALUE4 0x14110079ul +#define PCT_VALUE5 0x110A +#define PCT_STATUS_REG_LO 0x00 +#define PCT_STATUS_REG_HI 0x00 +#define PCT_VALUE6 0x0079 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_NAME__ '_' +#define PSS_NAME_X 'X' +#define PSS_NAME_P 'P' +#define PSS_NAME_S 'S' +#define PSS_LENGTH (sizeof pssBodyStruct + 3) +#define NUM_OF_ITEMS_IN_PSS 0x00 + + +// Defines for PSS Header Table +// ---------------------------- +#define PSS_PKG_LENGTH 0x20 // PSS_BODY_STRUCT_SIZE - 1 +#define PSS_NUM_OF_ELEMENTS 0x06 +#define PSS_FREQUENCY 0x00 +#define PSS_POWER 0x00 +#define PSS_TRANSITION_LATENCY DEFAULT_TRANSITION_LATENCY +#define PSS_BUS_MASTER_LATENCY DEFAULT_BUS_MASTER_LATENCY +#define PSS_CONTROL ((DEFAULT_ISOCH_RELIEF_TIME << 30) + \ + (DEFAULT_RAMP_VOLTAGE_OFFSET << 28) + \ + (DEFAULT_EXT_TYPE << 27) + \ + (DEFAULT_PLL_LOCK_TIME << 20) + \ + (DEFAULT_MAX_VOLTAGE_STEP << 18) + \ + (DEFAULT_VOLTAGE_STABLE_TIME << 11) + \ + (PSS_VID << 6) + PSS_FID) +#define PSS_STATUS (DEFAULT_EXTENDED_TYPE << 11) + (PSS_VID << 6) + (PSS_FID) + +// Defines for XPSS Header Table +// ---------------------------- +#define XPSS_PKG_LENGTH 0x47 // XPSS_BODY_STRUCT_SIZE - 1 +#define XPSS_NUM_OF_ELEMENTS 0x08 +#define XPSS_ACPI_BUFFER 0x080A0B11ul + + +// Defines for PPC Header Table +// ---------------------------- +#define PPC_NAME__ '_' +#define PPC_NAME_P 'P' +#define PPC_NAME_C 'C' +#define PPC_NAME_V 'V' +#define PPC_METHOD_FLAGS 0x00; +#define PPC_VALUE1 0x0A; + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_NAME__ '_' +#define PSD_NAME_P 'P' +#define PSD_NAME_S 'S' +#define PSD_NAME_D 'D' +#define PSD_HEADER_LENGTH (PSD_BODY_STRUCT_SIZE + 2) +#define PSD_VALUE1 0x01 + + +// Defines for PSD Header Table +// ---------------------------- +#define PSD_PKG_LENGTH (PSD_BODY_STRUCT_SIZE - 1) +#define NUM_OF_ENTRIES 0x05 +#define PSD_NUM_OF_ENTRIES 0x05 +#define PSD_REVISION 0x00 +#define PSD_DEPENDENCY_DOMAIN 0x00 +#define PSD_COORDINATION_TYPE_HW_ALL 0xFE +#define PSD_COORDINATION_TYPE_SW_ANY 0xFD +#define PSD_COORDINATION_TYPE_SW_ALL 0xFC +#define PSD_NUM_OF_PROCESSORS 0x01 +#define PSD_TWO_CORES_PER_COMPUTE_UNIT 0x02 +#define PSD_THREE_CORES_PER_COMPUTE_UNIT 0x03 +#define PSD_FOUR_CORES_PER_COMPUTE_UNIT 0x04 + + +#define CUSTOM_PSTATE_FLAG 0x55 +#define PSTATE_FLAG_1 0x55 +#define TARGET_PSTATE_FLAG 0xAA +#define PSTATE_FLAG_2 0xAA + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +//---------------------------------------------------------------------------- +// ACPI P-States AML TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +//-------------------------------------------- +// AML code definition +// (Scope) +//--------------------------------------------- +/// SCOPE +typedef struct _SCOPE { + UINT8 ScopeOpcode; ///< Opcode + UINT16 ScopeLength; ///< Scope Length + UINT8 ScopeValue1; ///< Value1 + UINT8 ScopeValue2; ///< Value2 + UINT8 ScopeNamePt1a__; ///< Name Pointer + UINT8 ScopeNamePt1a_P; ///< Name Pointer + UINT8 ScopeNamePt1a_R; ///< Name Pointer + UINT8 ScopeNamePt1b__; ///< Name Pointer + UINT8 ScopeNamePt2a_C; ///< Name Pointer + UINT8 ScopeNamePt2a_P; ///< Name Pointer + UINT8 ScopeNamePt2a_U; ///< Name Pointer + UINT8 ScopeNamePt2a_0; ///< Name Pointer +} SCOPE; +#define SCOPE_STRUCT_SIZE 13 // 13 Bytes + +//-------------------------------------------- +// AML code definition +// (PCT Header and Body) +//--------------------------------------------- + +///Performance Control Header +typedef struct _PCT_HEADER_BODY { + UINT8 NameOpcode; ///< Opcode + UINT8 PctName_a__; ///< String "_" + UINT8 PctName_a_P; ///< String "P" + UINT8 PctName_a_C; ///< String "C" + UINT8 PctName_a_T; ///< String "T" + UINT32 Value1; ///< Value1 + UINT16 Value2; ///< Value2 + UINT8 Value3; ///< Value3 + UINT8 GenericRegDescription1; ///< Generic Reg Description + UINT16 Length1; ///< Length1 + UINT8 AddressSpaceId1; ///< PCT Address Space ID + UINT8 RegisterBitWidth1; ///< PCT Register Bit Width + UINT8 RegisterBitOffset1; ///< PCT Register Bit Offset + UINT8 Reserved1; ///< Reserved + UINT32 ControlRegAddressLo; ///< Control Register Address Low + UINT32 ControlRegAddressHi; ///< Control Register Address High + UINT32 Value4; ///< Value4 + UINT16 Value5; ///< Value 5 + UINT8 GenericRegDescription2; ///< Generic Reg Description + UINT16 Length2; ///< Length2 + UINT8 AddressSpaceId2; ///< PCT Address Space ID + UINT8 RegisterBitWidth2; ///< PCT Register Bit Width + UINT8 RegisterBitOffset2; ///< PCT Register Bit Offset + UINT8 Reserved2; ///< Reserved + UINT32 StatusRegAddressLo; ///< Control Register Address Low + UINT32 StatusRegAddressHi; ///< Control Register Address High + UINT16 Value6; ///< Values +} PCT_HEADER_BODY; +#define PCT_STRUCT_SIZE 50 // 50 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Header) +//-------------------------------------------- +///Performance Supported States Header +typedef struct _PSS_HEADER { + UINT8 NameOpcode; ///< Opcode + UINT8 PssName_a__; ///< String "_" + UINT8 PssName_a_P; ///< String "P" + UINT8 PssName_a_S; ///< String "S" + UINT8 PssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< Package Opcode + UINT16 PssLength; ///< PSS Length + UINT8 NumOfItemsInPss; ///< Number of Items in PSS +} PSS_HEADER; +#define PSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + + +//-------------------------------------------- +// AML code definition +// (PSS Body) +//-------------------------------------------- +///Performance Supported States Body +typedef struct _PSS_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT8 DwordPrefixOpcode5; ///< Prefix Opcode5 + UINT32 Control; ///< Control + UINT8 DwordPrefixOpcode6; ///< Prefix Opcode6 + UINT32 Status; ///< Status +} PSS_BODY; +#define PSS_BODY_STRUCT_SIZE 33 // 33 Bytes + + +/*-------------------------------------------- + * AML code definition + * (XPSS Header) + *-------------------------------------------- + */ +/// Extended PSS Header +typedef struct _XPSS_HEADER { + UINT8 NameOpcode; ///< 08h + UINT8 XpssName_a_X; ///< String "X" + UINT8 XpssName_a_P; ///< String "P" + UINT8 XpssName_a_S; ///< String "S" + UINT8 XpssName_b_S; ///< String "S" + UINT8 PkgOpcode; ///< 12h + UINT16 XpssLength; ///< XPSS Length + UINT8 NumOfItemsInXpss; ///< Number of Items in XPSS +} XPSS_HEADER; +#define XPSS_HEADER_STRUCT_SIZE 9 // 9 Bytes + +/*-------------------------------------------- + * AML code definition + * (XPSS Body) + *-------------------------------------------- + */ +/// Extended PSS Body +typedef struct _XPSS_BODY { + UINT8 PkgOpcode; ///< 12h + UINT8 PkgLength; ///< Package Length + UINT8 XpssValueTbd; ///< XPSS Value + UINT8 NumOfElements; ///< Number of Elements + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 + UINT32 Frequency; ///< Frequency + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 + UINT32 Power; ///< Power + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 + UINT32 TransitionLatency; ///< Transition Latency + UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4 + UINT32 BusMasterLatency; ///< Bus Master Latency + UINT32 ControlBuffer; ///< Control Buffer + UINT32 ControlLo; ///< Control Low + UINT32 ControlHi; ///< Control High + UINT32 StatusBuffer; ///< Status Buffer + UINT32 StatusLo; ///< Status Low + UINT32 StatusHi; ///< Status High + UINT32 ControlMaskBuffer; ///< Control Mask Buffer + UINT32 ControlMaskLo; ///< Control Mask Low + UINT32 ControlMaskHi; ///< Control Mask High + UINT32 StatusMaskBuffer; ///< Status Mask Buffer + UINT32 StatusMaskLo; ///< Status Mask Low + UINT32 StatusMaskHi; ///< Status Mask High +} XPSS_BODY; +#define XPSS_BODY_STRUCT_SIZE 72 // 72 Bytes + +/*-------------------------------------------- + * AML code definition + * (PPC Header and Body) + *-------------------------------------------- + */ +/// Performance Present Capabilities Header +typedef struct _PPC_HEADER_BODY { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PpcName_a_P; ///< String "P" + UINT8 PpcName_b_P; ///< String "P" + UINT8 PpcName_a_C; ///< String "C" + UINT8 PpcName_a_V; ///< String "V" + UINT8 Value1; ///< Value + UINT8 DefaultPerfPresentCap; ///< Default Perf Present Cap + UINT8 MethodOpcode; ///< Method Opcode + UINT8 PpcLength; ///< Method Length + UINT8 PpcName_a__; ///< String "_" + UINT8 PpcName_c_P; ///< String "P" + UINT8 PpcName_d_P; ///< String "P" + UINT8 PpcName_b_C; ///< String "C" + UINT8 MethodFlags; ///< Method Flags + UINT8 ReturnOpcode; ///< Return Opcoce + UINT8 PpcName_e_P; ///< String "P" + UINT8 PpcName_f_P; ///< String "P" + UINT8 PpcName_c_C; ///< String "C" + UINT8 PpcName_b_V; ///< String "V" + +} PPC_HEADER_BODY; +#define PPC_HEADER_BODY_STRUCT_SIZE 19 // 19 Bytes +#define PPC_METHOD_LENGTH 11 // 11 Bytes + + +/*-------------------------------------------- + * AML code definition + * (PSD Header) + *-------------------------------------------- + */ +/// P-State Dependency Header +typedef struct _PSD_HEADER { + UINT8 NameOpcode; ///< Name Opcode + UINT8 PsdName_a__; ///< String "_" + UINT8 PsdName_a_P; ///< String "P" + UINT8 PsdName_a_S; ///< String "S" + UINT8 PsdName_a_D; ///< String "D" + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PsdLength; ///< PSD Length + UINT8 Value1; ///< Value +} PSD_HEADER; +#define PSD_HEADER_STRUCT_SIZE 8 // 8 Bytes + +/*-------------------------------------------- + * AML code definition + * (PSD Body) + *-------------------------------------------- + */ +/// P-State Dependency Body +typedef struct _PSD_BODY { + UINT8 PkgOpcode; ///< Package Opcode + UINT8 PkgLength; ///< Package Length + UINT8 NumOfEntries; ///< Number of Entries + UINT8 BytePrefixOpcode1; ///< Prefix Opcode1 in Byte + UINT8 PsdNumOfEntries; ///< PSD Number of Entries + UINT8 BytePrefixOpcode2; ///< Prefix Opcode2 in Byte + UINT8 PsdRevision; ///< PSD Revision + UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 in DWord + UINT32 DependencyDomain; ///< Dependency Domain + UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 in DWord + UINT32 CoordinationType; ///< (0xFC = SW_ALL, 0xFD = SW_ANY, 0xFE = HW_ALL) + UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 in DWord + UINT32 NumOfProcessors; ///< Number of Processors +} PSD_BODY; +#define PSD_BODY_STRUCT_SIZE 22 // 22 Bytes + +//---------------------------------------------------------------------------- +// WHEA TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- + +/// HEST MCE TABLE +typedef struct _AMD_HEST_MCE_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_MCE structure. + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCapInitDataMSD; ///< the machine check global capability register(MCG_CAP). + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will program into + UINT32 GlobCtrlInitDataMSD; ///< the machine check global control register(MCG_CTL). + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[7]; ///< reserve 7 bytes as spec's required +} AMD_HEST_MCE_TABLE; + +/// HEST CMC TABLE +typedef struct _AMD_HEST_CMC_TABLE { + UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_CMC structure. + UINT8 NumHWBanks; ///< The number of hardware error reporting banks. + UINT8 Rsvd[3]; ///< reserve 3 bytes as spec's required +} AMD_HEST_CMC_TABLE; + +/// HEST BANK +typedef struct _AMD_HEST_BANK { + UINT8 BankNum; ///< Zero-based index identifies the machine check error bank. + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check bank + ///< is to be cleared during system initialization. + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT32 CtrlRegMSRAddr; ///< Address of the hardware bank's control MSR. Ignored if zero. + + UINT32 CtrlInitDataLSD; ///< This is the value the OS will program into the machine check + UINT32 CtrlInitDataMSD; ///< bank's control register + UINT32 StatRegMSRAddr; ///< Address of the hardware bank's MCi_STAT MSR. Ignored if zero. + UINT32 AddrRegMSRAddr; ///< Address of the hardware bank's MCi_ADDR MSR. Ignored if zero. + UINT32 MiscRegMSRAddr; ///< Address of the hardware bank's MCi_MISC MSR. Ignored if zero. +} AMD_HEST_BANK; + +/// Initial data of AMD_HEST_BANK +typedef struct _AMD_HEST_BANK_INIT_DATA { + UINT32 CtrlInitDataLSD; ///< Initial data of CtrlInitDataLSD + UINT32 CtrlInitDataMSD; ///< Initial data of CtrlInitDataMSD + UINT32 CtrlRegMSRAddr; ///< Initial data of CtrlRegMSRAddr + UINT32 StatRegMSRAddr; ///< Initial data of StatRegMSRAddr + UINT32 AddrRegMSRAddr; ///< Initial data of AddrRegMSRAddr + UINT32 MiscRegMSRAddr; ///< Initial data of MiscRegMSRAddr +} AMD_HEST_BANK_INIT_DATA; + +/// MSR179 Global Machine Check Capabilities data struct +typedef struct _MSR_MCG_CAP_STRUCT { + UINT64 Count:8; ///< Indicates the number of + ///< error-reporting banks visible to each core + UINT64 McgCtlP:1; ///< 1=The machine check control registers + UINT64 Rsvd:55; ///< reserved +} MSR_MCG_CAP_STRUCT; + +/// Initial data of WHEA +typedef struct _AMD_WHEA_INIT_DATA { + UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into the machine + UINT32 GlobCapInitDataMSD; ///< Check global capability register + UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will grogram into the machine + UINT32 GlobCtrlInitDataMSD; ///< Check global control register + UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check + ///< bank is to be cleared during system initialization + UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register + UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be + ///< modified by the OS. If the bit for the associated parameter is + ///< set, the parameter is writable by the OS. + UINT8 HestBankNum; ///< Number of HEST Bank + AMD_HEST_BANK_INIT_DATA *HestBankInitData; ///< Pointer to Initial data of HEST Bank +} AMD_WHEA_INIT_DATA; + +//---------------------------------------------------------------------------- +// DMI TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// DMI brand information +typedef struct { + UINT16 String1:4; ///< String1 + UINT16 String2:4; ///< String2 + UINT16 Model:7; ///< Model + UINT16 Pg:1; ///< Page +} BRAND_ID; + +/// DMI cache information +typedef struct { + UINT32 L1CacheSize; ///< L1 cache size + UINT8 L1CacheAssoc; ///< L1 cache associativity + UINT32 L2CacheSize; ///< L2 cache size + UINT8 L2CacheAssoc; ///< L2 cache associativity + UINT32 L3CacheSize; ///< L3 cache size + UINT8 L3CacheAssoc; ///< L3 cache associativity +} CPU_CACHE_INFO; + +/// DMI processor information +typedef struct { + UINT8 ExtendedFamily; ///< Extended Family + UINT8 ExtendedModel; ///< Extended Model + UINT8 BaseFamily; ///< Base Family + UINT8 BaseModel; ///< Base Model + UINT8 Stepping; ///< Stepping + UINT8 PackageType; ///< PackageType + BRAND_ID BrandId; ///< BrandId which contains information about String1, String2, Model and Page + UINT8 TotalCoreNumber; ///< Number of total cores + UINT8 EnabledCoreNumber; ///< Number of enabled cores + UINT8 ProcUpgrade; ///< ProcUpdrade + CPU_CACHE_INFO CacheInfo; ///< CPU cache info +} CPU_TYPE_INFO; + +/// A structure containing processor name string and +/// the value that should be provide to DMI type 4 processor family +typedef struct { + IN CONST CHAR8 *Stringstart; ///< The literal string + IN UINT8 T4ProcFamilySetting; ///< The value set to DMI type 4 processor family +} CPU_T4_PROC_FAMILY; + +/// DMI ECC information +typedef struct { + BOOLEAN EccCapable; ///< ECC Capable +} CPU_GET_MEM_INFO; + +/* Transfer vectors for DMI family specific routines */ +typedef VOID OPTION_DMI_GET_CPU_INFO ( + IN OUT CPU_TYPE_INFO *CpuInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_PROC_FAMILY ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT8 OPTION_DMI_GET_VOLTAGE ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_MAX_SPEED ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef UINT16 OPTION_DMI_GET_EXT_CLOCK ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +typedef VOID OPTION_DMI_GET_MEM_INFO ( + IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/// Brand table entry format +typedef struct { + UINT8 PackageType; ///< Package type + UINT8 PgOfBrandId; ///< Page + UINT8 NumberOfCores; ///< Number of cores + UINT8 String1ofBrandId; ///< String1 + UINT8 ValueSetToDmiTable; ///< The value which will should be set to DMI table +} DMI_BRAND_ENTRY; + +/// Family specific data table structure +struct _PROC_FAMILY_TABLE { + UINT64 ProcessorFamily; ///< processor + OPTION_DMI_GET_CPU_INFO *DmiGetCpuInfo; ///< transfer vectors + OPTION_DMI_GET_PROC_FAMILY *DmiGetT4ProcFamily; ///< Get DMI type 4 processor family information + OPTION_DMI_GET_VOLTAGE *DmiGetVoltage; ///< vector for reading voltage + OPTION_DMI_GET_MAX_SPEED *DmiGetMaxSpeed; ///< vector for reading speed + OPTION_DMI_GET_EXT_CLOCK *DmiGetExtClock; ///< vector for reading external clock speed + OPTION_DMI_GET_MEM_INFO *DmiGetMemInfo; ///< Get memory information + UINT8 LenBrandList; ///< size of brand table + CONST DMI_BRAND_ENTRY *DmiBrandList; ///< translate brand info to DMI identifier +}; + +//---------------------------------------------------------------------------- +// SLIT TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Format for SRAT Header +typedef struct { + UINT8 Sign[4]; ///< Signature + UINT32 TableLength; ///< Table Length + UINT8 Revision; ///< Revision + UINT8 Checksum; ///< Checksum + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision +} ACPI_TABLE_HEADER; + +//---------------------------------------------------------------------------- +// SRAT TYPEDEFS, STRUCTURES, ENUMS +// +//---------------------------------------------------------------------------- +/// Format for SRAT Header +typedef struct _CPU_SRAT_HEADER { + UINT8 Sign[4]; ///< Signature + UINT32 TableLength; ///< Table Length + UINT8 Revision; ///< Revision + UINT8 Checksum; ///< Checksum + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision + UINT32 TableRev; ///< Table Revision + UINT8 Reserved[8]; ///< Reserved +} CPU_SRAT_HEADER; + + +/// Format for SRAT APIC Affinity Entry +typedef struct _CPU_SRAT_APIC_ENTRY { + UINT8 Type; ///< Type + UINT8 Length; ///< Length + UINT8 Domain; ///< Domain + UINT8 ApicId; ///< Apic ID + UINT32 Flags; ///< Flags + UINT8 LSApicEid; ///< Local SAPIC EID + UINT8 Reserved[7]; ///< Reserved +} CPU_SRAT_APIC_ENTRY; + + +/// Format for SRAT Memory Affinity Entry +typedef struct _CPU_SRAT_MEMORY_ENTRY { + UINT8 Type; ///< 0: Memory affinity = 1 + UINT8 Length; ///< 1: Length = 40 bytes + UINT32 Domain; ///< 2: Proximity domain + UINT8 Reserved1[2]; ///< 6: Reserved + UINT32 BaseAddrLow; ///< 8: Low 32bits address base + UINT32 BaseAddrHigh; ///< 12: High 32bits address base + UINT32 LengthAddrLow; ///< 16: Low 32bits address limit + UINT32 LengthAddrHigh; ///< 20: High 32bits address limit + UINT8 Reserved2[4]; ///< 24: Memory Type + UINT32 Flags; ///< 28: Flags + UINT8 Reserved3[8]; ///< 32: Reserved +} CPU_SRAT_MEMORY_ENTRY; + +//---------------------------------------------------------------------------- +// CRAT TYPEDEFS, STRUCTURES, ENUMS +// Component Resource Affinity Table +//---------------------------------------------------------------------------- +/// Format for CRAT Header +typedef struct { + UINT8 Sign[4]; ///< CRAT, Signature for the Component Resource Affinity Table. + UINT32 Length; ///< Length, in bytes, of the entire CRAT + UINT8 Revision; ///< 0 + UINT8 Checksum; ///< Entire table must sum to zero. + UINT8 OemId[6]; ///< OEM ID + UINT8 OemTableId[8]; ///< OEM Tabled ID + UINT32 OemRev; ///< OEM Revision + UINT8 CreatorId[4]; ///< Creator ID + UINT32 CreatorRev; ///< Creator Revision + UINT32 TotalEntries; ///< total number[n] of entries in the CRAT + UINT16 NumDomains; ///< Number of HSA proximity domains + UINT8 Reserved[6]; ///< Reserved +} CRAT_HEADER; + +/// Flags field of the CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 CpuPresent:1; ///< Cpu Present + UINT32 GpuPresent:1; ///< Gpu Present + UINT32 IommuPresent:1; ///< IOMMU Present + UINT32 :27; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT_FLAG; + +/// CRAT HSA Processing Unit Affinity Structure +typedef struct { + UINT8 Type; ///< 0 - CRAT HSA Processing Unit Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_HSA_PROCESSING_UNIT_FLAG Flags; ///< Flags - HSA Processing Unit Affinity Structure + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 ProcessorIdLow; ///< Low value of the logical processor included in this HSA proximity domain + UINT16 NumCPUCores; ///< Indicates count of CCompute execution units present in this APU node. + UINT16 NumSIMDCores; ///< Indicates maximum count of HCompute SIMD cores present in this node. + UINT16 MaxWavesSIMD; ///< This identifies the max. number of launched waves per SIMD. + UINT16 IoCount; ///< Number of discoverable IO Interfaces connecting this node to other components. + UINT16 HSACapability; ///< Must be 0 + UINT16 LDSSizeInKB; ///< Size of LDS memory per SIMD Wavefront + UINT8 WaveFrontSize; ///< 64, may be 32 for some FSA based architectures + UINT8 NumBanks; ///< Number of Banks or "Shader Engines", typically 1 or 2 + UINT16 uEngineIdentifier; ///< Identifier (Rev) of the GPU uEngine or firmware + UINT8 NumArrays; ///< Number of SIMD Arrays per Engine + UINT8 NumCUPerArray; ///< Number of Compute Units (CU) per SIMD Array + UINT8 NumSIMDPerCU; ///< Number of SIMD representing a Compute Unit + UINT8 MaxSlotsScratchCU; ///< Max. Number of temp. memory ("scratch") wave slots + ///< available to access, may be 0 if HW has no restrictions + UINT8 Reserved1[4]; ///< Reserved +} CRAT_HSA_PROCESSING_UNIT; + +/// Flags field of the CRAT Memory Affinity Structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 HotPluggable:1; ///< Hot Pluggable + UINT32 NonVolatile:1; ///< If set, the memory region represents Non-Volatile memory + UINT32 :29; ///< Reserved +} CRAT_MEMORY_FLAG; + +/// CRAT Memory Affinity Structure +typedef struct { + UINT8 Type; ///< 1 - CRAT Memory Affinity Structure + UINT8 Length; ///< 40 + UINT16 Reserved; ///< Reserved + CRAT_MEMORY_FLAG Flags; ///< Flags - Memory Affinity Structure. Indicates whether the region of memory is enabled and can be hot plugged + UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to + UINT32 BaseAddressLow; ///< Low 32Bits of the Base Address of the memory range + UINT32 BaseAddressHigh; ///< High 32Bits of the Base Address of the memory range + UINT32 LengthLow; ///< Low 32Bits of the length of the memory range + UINT32 LengthHigh; ///< High 32Bits of the length of the memory range + UINT32 Width; ///< Memory width - Specifies the number of parallel bits of the memory interface + UINT8 Reserved1[8]; ///< Reserved +} CRAT_MEMORY; + +/// Flags field of the CRAT Cache Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataCache:1; ///< 1 if cache includes data + UINT32 InstructionCache:1; ///< 1 if cache includes instructions + UINT32 CpuCache:1; ///< 1 if cache is part of CPU functionality + UINT32 SimdCache:1; ///< 1 if cache is part of SIMD functionality + UINT32 :27; ///< Reserved +} CRAT_CACHE_FLAG; + +/// CRAT Cache Affinity Structure +typedef struct { + UINT8 Type; ///< 2 - CRAT Cache Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_CACHE_FLAG Flags; ///< Flags - Cache Affinity Structure. Indicates whether the region of cache is enabled + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 CacheSize; ///< Cache size in KB + UINT8 CacheLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 LinesPerTag; ///< Cache Lines per tag + UINT16 CacheLineSize; ///< Cache line size in bytes + UINT8 Associativity; ///< Cache associativity + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative + UINT8 CacheProperties; ///< Cache Properties bits [2:0] represent Inclusive/Exclusive property encoded. + ///< 0: Cache is strictly exclusive to lower level caches. + ///< 1: Cache is mostly exclusive to lower level caches. + ///< 2: Cache is strictly inclusive to lower level caches. + ///< 3: Cache is mostly inclusive to lower level caches. + ///< 4: Cache is a "constant cache" (= explicit update) + ///< 5: Cache is a "specialty cache" (e.g. Texture cache) + ///< 6-7: Reserved + ///< CacheProperties bits [7:3] are reserved + UINT16 CacheLatency; ///< Cost of time to access cache described in nanoseconds. + UINT8 Reserved1[8]; ///< Reserved +} CRAT_CACHE; + +/// Flags field of the CRAT TLB Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 DataTLB:1; ///< 1 if TLB includes translation information for data. + UINT32 InstructionTLB:1; ///< 1 if TLB includes translation information for instructions. + UINT32 CpuTLB:1; ///< 1 if TLB is part of CPU functionality + UINT32 SimdTLB:1; ///< 1 if TLB is part of SIMD functionality + UINT32 TLB4KBase256:1; ///< 1 if value in table is factored by 256 to get number of 4K entries + UINT32 :1; ///< Reserved + UINT32 TLB2MBase256:1; ///< 1 if value in table is factored by 256 to get number of 2M entries + UINT32 :1; ///< Reserved + UINT32 TLB1GBase256:1; ///< 1 if value in table is factored by 256 to get number of 1G entries + UINT32 :22; ///< Reserved +} CRAT_TLB_FLAG; + +/// CRAT TLB Affinity Structure +typedef struct { + UINT8 Type; ///< 3 - CRAT TLB Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_TLB_FLAG Flags; ///< Flags - TLB Affinity Structure. Indicates whether the TLB is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 TlbLevel; ///< Integer representing level: 1, 2, 3, 4, etc. + UINT8 DataTlbAssociativity2MB; ///< Data TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 DataTlbSize2MB; ///< Data TLB number of entries for 2MB. + UINT8 InstructionTlbAssociativity2MB; ///< Instruction TLB associativity for 2MB pages + ///< The associativity fields are encoded as follows: + ///< 00h: Reserved. + ///< 01h: Direct mapped. + ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.) + ///< FFh: Fully associative. + UINT8 InstructionTlbSize2MB; ///< Instruction TLB number of entries for 2MB pages. + UINT8 DataTlbAssociativity4K; ///< Data TLB Associativity for 4KB pages + UINT8 DataTlbSize4K; ///< Data TLB number of entries for 4KB pages + UINT8 InstructionTlbAssociativity4K; ///< Instruction TLB Associativity for 4KB pages + UINT8 InstructionTlbSize4K; ///< Instruction TLB number of entries for 4KB pages + UINT8 DataTlbAssociativity1G; ///< Data TLB Associativity for 1GB pages + UINT8 DataTlbSize1G; ///< Data TLB number of entries for 1GB pages + UINT8 InstructionTlbAssociativity1G; ///< Instruction TLB Associativity for 1GB pages + UINT8 InstructionTlbSize1G; ///< Instruction TLB number of entries for 1GB pages + UINT8 Reserved1[4]; ///< Reserved +} CRAT_TLB; + +/// Flags field of the CRAT FPU Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 :31; ///< Reserved +} CRAT_FPU_FLAG; + +/// CRAT FPU Affinity Structure +typedef struct { + UINT8 Type; ///< 4 - CRAT FPU Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_FPU_FLAG Flags; ///< Flags - FPU Affinity Structure. Indicates whether the region of FPU affinity structure is enabled and defined + UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component. + UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor + UINT32 FPUSize; ///< Product specific + UINT8 Reserved1[16]; ///< Reserved +} CRAT_FPU; + +/// Flags field of the CRAT IO Affinity structure +typedef struct { + UINT32 Enabled:1; ///< Enabled + UINT32 Coherency:1; ///< If set, IO interface supports coherent transactions (natively or through protocol extensions) + UINT32 :30; ///< Reserved +} CRAT_IO_FLAG; + +/// CRAT IO Affinity Structure +typedef struct { + UINT8 Type; ///< 5 - CRAT IO Affinity Structure + UINT8 Length; ///< 64 + UINT16 Reserved; ///< Reserved + CRAT_IO_FLAG Flags; ///< Flags - IO Affinity Structure. Indicates whether the region of IO affinity structure is enabled and defined. + UINT32 ProximityDomainFrom; ///< Integer that represents the proximity domain to which the IO Interface belongs to + UINT32 ProximityDomainTo; ///< Integer that represents the other proximity domain to which the IO Interface belongs to + UINT8 IoType; ///< IO Interface type. Values defined are + ///< 0: Undefined + ///< 1: Hypertransport + ///< 2: PCI Express + ///< 3: Other (e.g. internal) + ///< 4-255: Reserved + UINT8 VersionMajor; ///< Major version of the Bus interface + UINT16 VersionMinor; ///< Minor version of the Bus interface ((optional) + UINT32 MinimumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MaximumLatency; ///< Cost of time to transfer, described in nanoseconds. + UINT32 MinimumBandwidth; ///< Minimum interface Bandwidth in MB/s + UINT32 MaximumBandwidth; ///< Maximum interface Bandwidth in MB/s + UINT32 RecommendedTransferSize; ///< Recommended transfer size to reach maximum interface bandwidth in Bytes + UINT8 Reserved1[24]; ///< Reserved +} CRAT_IO; + +#define CRAT_MAX_LENGTH 0x800ul ///< Reserve 2K for CRAT +/// CRAT entry type +typedef enum { + CRAT_TYPE_HSA_PROC_UNIT = 0, ///< 0 - CRAT HSA Processing Unit Structure + CRAT_TYPE_MEMORY, ///< 1 - CRAT Memory Affinity Structure + CRAT_TYPE_CACHE, ///< 2 - CRAT Cache Affinity Structure + CRAT_TYPE_TLB, ///< 3 - CRAT TLB Affinity Structure + CRAT_TYPE_FPU, ///< 4 - CRAT FPU Affinity Structure + CRAT_TYPE_IO, ///< 5 - CRAT IO Affinity Structure +} CRAT_ENTRY_TYPE; + +/*---------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *---------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +AmdCpuLate ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig + ); + +AGESA_STATUS +CreateAcpiWhea ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT VOID **WheaMcePtr, + IN OUT VOID **WheaCmcPtr + ); + +AGESA_STATUS +CreateDmiRecords ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT DMI_INFO **DmiTable + ); + +AGESA_STATUS +GetType4Type7Info ( + IN AP_EXE_PARAMS *ApExeParams + ); + +VOID +DmiGetT4ProcFamilyFromBrandId ( + IN OUT UINT8 *T4ProcFamily, + IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable, + IN CPU_TYPE_INFO *CpuInfo, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +VOID +GetNameString ( + IN OUT CHAR8 *String, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +BOOLEAN +IsSourceStrContainTargetStr ( + IN OUT CHAR8 *SourceStr, + IN OUT CONST CHAR8 *TargetStr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +CreateAcpiCrat ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + OUT VOID **CratPtr + ); + +AGESA_STATUS +CreateAcpiCdit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + OUT VOID **CditPtr + ); + +AGESA_STATUS +CreateAcpiSrat ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN OUT VOID **SratPtr + ); + +AGESA_STATUS +CreateAcpiSlit ( + IN OUT AMD_CONFIG_PARAMS *StdHeader, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN OUT VOID **SlitPtr + ); + +VOID +ChecksumAcpiTable ( + IN OUT ACPI_TABLE_HEADER *Table, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +RunLateApTaskOnAllAPs ( + IN AP_EXE_PARAMS *ApParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +RunLateApTaskOnAllCore0s ( + IN AP_EXE_PARAMS *ApParams, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +#endif // _CPU_LATE_INIT_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuRegisters.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuRegisters.h new file mode 100644 index 0000000000..601a643ce2 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/cpuRegisters.h @@ -0,0 +1,467 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU Register Table Related Functions + * + * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 282320 $ @e \$Date: 2014-01-09 20:13:34 -0600 (Thu, 09 Jan 2014) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _CPU_REGISTERS_H_ +#define _CPU_REGISTERS_H_ + +#include "cpuFamRegisters.h" +/* + *-------------------------------------------------------------- + * + * M O D U L E S U S E D + * + *--------------------------------------------------------------- + */ + +/* + *-------------------------------------------------------------- + * + * D E F I N I T I O N S / M A C R O S + * + *--------------------------------------------------------------- + */ + +#undef BIT0 +#undef BIT1 +#undef BIT2 +#undef BIT3 +#undef BIT4 +#undef BIT5 +#undef BIT6 +#undef BIT7 +#undef BIT8 +#undef BIT9 +#undef BIT10 +#undef BIT10 +#undef BIT11 +#undef BIT12 +#undef BIT13 +#undef BIT14 +#undef BIT15 +#undef BIT16 +#undef BIT17 +#undef BIT18 +#undef BIT19 +#undef BIT20 +#undef BIT21 +#undef BIT22 +#undef BIT23 +#undef BIT24 +#undef BIT25 +#undef BIT26 +#undef BIT27 +#undef BIT28 +#undef BIT29 +#undef BIT30 +#undef BIT31 +#undef BIT32 +#undef BIT33 +#undef BIT34 +#undef BIT35 +#undef BIT36 +#undef BIT37 +#undef BIT38 +#undef BIT39 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT40 +#undef BIT41 +#undef BIT42 +#undef BIT43 +#undef BIT44 +#undef BIT45 +#undef BIT46 +#undef BIT47 +#undef BIT48 +#undef BIT49 +#undef BIT50 +#undef BIT51 +#undef BIT52 +#undef BIT53 +#undef BIT54 +#undef BIT55 +#undef BIT56 +#undef BIT57 +#undef BIT58 +#undef BIT59 +#undef BIT60 +#undef BIT61 +#undef BIT62 +#undef BIT63 + +#define BIT0 0x0000000000000001ull +#define BIT1 0x0000000000000002ull +#define BIT2 0x0000000000000004ull +#define BIT3 0x0000000000000008ull +#define BIT4 0x0000000000000010ull +#define BIT5 0x0000000000000020ull +#define BIT6 0x0000000000000040ull +#define BIT7 0x0000000000000080ull +#define BIT8 0x0000000000000100ull +#define BIT9 0x0000000000000200ull +#define BIT10 0x0000000000000400ull +#define BIT11 0x0000000000000800ull +#define BIT12 0x0000000000001000ull +#define BIT13 0x0000000000002000ull +#define BIT14 0x0000000000004000ull +#define BIT15 0x0000000000008000ull +#define BIT16 0x0000000000010000ull +#define BIT17 0x0000000000020000ull +#define BIT18 0x0000000000040000ull +#define BIT19 0x0000000000080000ull +#define BIT20 0x0000000000100000ull +#define BIT21 0x0000000000200000ull +#define BIT22 0x0000000000400000ull +#define BIT23 0x0000000000800000ull +#define BIT24 0x0000000001000000ull +#define BIT25 0x0000000002000000ull +#define BIT26 0x0000000004000000ull +#define BIT27 0x0000000008000000ull +#define BIT28 0x0000000010000000ull +#define BIT29 0x0000000020000000ull +#define BIT30 0x0000000040000000ull +#define BIT31 0x0000000080000000ull +#define BIT32 0x0000000100000000ull +#define BIT33 0x0000000200000000ull +#define BIT34 0x0000000400000000ull +#define BIT35 0x0000000800000000ull +#define BIT36 0x0000001000000000ull +#define BIT37 0x0000002000000000ull +#define BIT38 0x0000004000000000ull +#define BIT39 0x0000008000000000ull +#define BIT40 0x0000010000000000ull +#define BIT41 0x0000020000000000ull +#define BIT42 0x0000040000000000ull +#define BIT43 0x0000080000000000ull +#define BIT44 0x0000100000000000ull +#define BIT45 0x0000200000000000ull +#define BIT46 0x0000400000000000ull +#define BIT47 0x0000800000000000ull +#define BIT48 0x0001000000000000ull +#define BIT49 0x0002000000000000ull +#define BIT50 0x0004000000000000ull +#define BIT51 0x0008000000000000ull +#define BIT52 0x0010000000000000ull +#define BIT53 0x0020000000000000ull +#define BIT54 0x0040000000000000ull +#define BIT55 0x0080000000000000ull +#define BIT56 0x0100000000000000ull +#define BIT57 0x0200000000000000ull +#define BIT58 0x0400000000000000ull +#define BIT59 0x0800000000000000ull +#define BIT60 0x1000000000000000ull +#define BIT61 0x2000000000000000ull +#define BIT62 0x4000000000000000ull +#define BIT63 0x8000000000000000ull + +/// CPUID related registers +#define AMD_CPUID_FMF 0x80000001ul // Family Model Features information +#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID +#define AMD_CPUID_L2L3Cache_L2TLB 0x80000006ul +#define CPUID_ASSOCIATIVITY_DISABLED 0x00 +#define CPUID_ASSOCIATIVITY_1_WAY 0x01 +#define CPUID_ASSOCIATIVITY_2_WAY 0x02 +#define CPUID_ASSOCIATIVITY_4_WAY 0x04 +#define CPUID_ASSOCIATIVITY_8_WAY 0x06 +#define CPUID_ASSOCIATIVITY_16_WAY 0x08 +#define CPUID_ASSOCIATIVITY_32_WAY 0x0A +#define CPUID_ASSOCIATIVITY_48_WAY 0x0B +#define CPUID_ASSOCIATIVITY_64_WAY 0x0C +#define CPUID_ASSOCIATIVITY_96_WAY 0x0D +#define CPUID_ASSOCIATIVITY_128_WAY 0x0E +#define CPUID_ASSOCIATIVITY_FULLY 0x0F +#define AMD_CPUID_TLB_L1Cache 0x80000005ul +#define AMD_CPUID_L1L2Tlb1GIdentifiers 0x80000019ul +#define AMD_CPUID_APM 0x80000007ul +#define LOCAL_APIC_ID 24 +#define LOGICAL_PROCESSOR_COUNT 16 +#define AMD_CPUID_ASIZE_PCCOUNT 0x80000008ul // Address Size, Physical Core Count + +/// CPU Logical ID Transfer +typedef struct { + UINT32 RawId; ///< RawID + UINT64 LogicalId; ///< LogicalID +} CPU_LOGICAL_ID_XLAT; + +/// Logical CPU ID Table +typedef struct { + IN UINT32 Elements; ///< Number of Elements + IN CPU_LOGICAL_ID_XLAT *LogicalIdTable; ///< CPU Logical ID Transfer table Pointer +} LOGICAL_ID_TABLE; + +// MSRs +// ------------------------ +#define MCG_CTL_P 0x00000100ul // bit 8 for MCG_CTL_P under MSRR +#define MSR_MCG_CAP 0x00000179ul +#define DBG_CTL_MSR 0x000001D9ul +#define MSR_MC0_CTL 0x00000400ul +#define MSR_MC0_STATUS 0x00000401ul +#define MSR_MC0_MISC 0x00000403ul +#define MSR_MC1_MISC 0x00000407ul +#define MSR_MC2_MISC 0x0000040Bul +#define MSR_MC4_MISC0 0x00000413ul +#define MSR_MC5_MISC 0x00000417ul +#define MSR_MC4_MISC1 0xC0000408ul +#define MSR_MC5_STATUS 0x00000415ul +#define MSR_MC6_STATUS 0x00000419ul + +#define MSR_APIC_BAR 0x0000001Bul +#define MSR_PATCH_LEVEL 0x0000008Bul + +#define CPUID_LONG_MODE_ADDR 0x80000008ul + +#define MSR_EXTENDED_FEATURE_EN 0xC0000080ul +#define MSR_MC_MISC_LINK_THRESHOLD 0xC0000408ul +#define MSR_MC_MISC_L3_THRESHOLD 0xC0000409ul +#define MSR_PATCH_LOADER 0xC0010020ul + +/// Patch Loader Register +typedef struct { + UINT64 PatchBase:32; ///< Linear address of patch header address block + UINT64 SBZ:32; ///< Should be zero +} PATCH_LOADER_MSR; + +#define MSR_SYS_CFG 0xC0010010ul // SYSCFG - F15 Shared +#define MSR_TOM2 0xC001001Dul // TOP_MEM2 - F15 Shared +#define MSR_MC0_CTL_MASK 0xC0010044ul // MC0 Control Mask +#define MSR_MC1_CTL_MASK 0xC0010045ul // MC1 Control Mask +#define MSR_MC2_CTL_MASK 0xC0010046ul // MC2 Control Mask +#define MSR_MC4_CTL_MASK 0xC0010048ul // MC4 Control Mask + +#define MSR_CPUID_FEATS 0xC0011004ul // CPUID Features +#define MSR_CPUID_EXT_FEATS 0xC0011005ul // CPUID Extended Features +#define MSR_HDT_CFG 0xC001100Aul +#define MSR_HWCR 0xC0010015ul +#define MSR_NB_CFG 0xC001001Ful // NB Config +#define CPU_WDT_CFG 0xC0010074ul +#define ENABLE_CF8_EXT_CFG 0x00004000ul // [46] +#define INIT_APIC_CPUID_LO 0x00400000ul // [54] +#define MSR_CU_SPMCTL 0xC0010281ul +#define MSR_CpuWdtCfg 0xC0010074ul // CPU Watchdog Timer +#define MSR_LS_CFG 0xC0011020ul +#define MSR_IC_CFG 0xC0011021ul // ICache Config - F15 Shared +#define MSR_DC_CFG 0xC0011022ul +#define MSR_ME_CFG 0xC0011029ul +#define MSR_BU_CFG 0xC0011023ul +#define MSR_CU_CFG 0xC0011023ul // F15 Shared +#define MSR_DE_CFG 0xC0011029ul // F15 Shared +#define MSR_BU_CFG2 0xC001102Aul +#define MSR_CU_CFG2 0xC001102Aul // F15 Shared +#define MSR_BU_CFG3 0xC001102Bul +#define MSR_CU_CFG3 0xC001102Bul // F15 Shared +#define MSR_LS_CFG2 0xC001102Dul +#define MSR_CU_PFTCFG 0xC001102Ful +#define MSR_IBS_OP_DATA3 0xC0011037ul +#define MSR_C001_1070 0xC0011070ul // F15 Shared +#define MSR_L2I_CFG 0xC00110A0ul // F16 shared +#define MSR_CU_CBBCFG 0xC00110A1ul // F15 CZ + + +#define MSR_CPUID_NAME_STRING0 0xC0010030ul // First CPUID namestring register +#define MSR_CPUID_NAME_STRING1 0xC0010031ul +#define MSR_CPUID_NAME_STRING2 0XC0010032ul +#define MSR_CPUID_NAME_STRING3 0xC0010033ul +#define MSR_CPUID_NAME_STRING4 0xC0010034ul +#define MSR_CPUID_NAME_STRING5 0xC0010035ul // Last CPUID namestring register +#define MSR_MMIO_Cfg_Base 0xC0010058ul // MMIO Configuration Base Address Register +#define MSR_BIST 0xC0010060ul // BIST Results register +#define MSR_OSVW_ID_Length 0xC0010140ul +#define MSR_OSVW_Status 0xC0010141ul +#define MSR_NB_PERF_CTL0 0xC0010240ul +#define MSR_NB_PERF_CTR0 0xC0010241ul +#define MSR_NB_PERF_CTL1 0xC0010242ul +#define MSR_NB_PERF_CTR1 0xC0010243ul +#define MSR_NB_PERF_CTL2 0xC0010244ul +#define MSR_NB_PERF_CTR2 0xC0010245ul +#define MSR_NB_PERF_CTL3 0xC0010246ul +#define MSR_NB_PERF_CTR3 0xC0010247ul +#define CU_SPMCTL 0xC0010281ul // Streaming Performance Monitor Control +#define MSR_PERF_CONTROL3 0xC0010003ul // Performance control register number 3 +#define MSR_PERF_COUNTER3 0xC0010007ul // Performance counter register number 3 +#define PERF_RESERVE_BIT_MASK 0x030FFFDFFFFFull // Mask of the Performance control Reserve bits +#define PERF_CAR_CORRUPTION_EVENT 0x040040F0E2ul // Configure the controller to capture the + // CAR Corruption +// FUNC_0 registers +// ---------------- +#define LINK_INIT_CTRL 0x6C +#define LINK_INIT_CTRL_REQ_DIS 0x02 // [1] = ReqDis +#define LINK_INIT_COLD_RST_DET BIT4 +#define LINK_INIT_BIOS_RST_DET_0 BIT5 +#define LINK_INIT_BIOS_RST_DET_1 BIT9 +#define LINK_INIT_BIOS_RST_DET_2 BIT10 +#define LINK_INIT_BIOS_RST_DET BIT9 | BIT10 +#define EXTENDED_NODE_ID 0x160 + +#define CORE_CTRL 0x1DC +#define CORE_CTRL_CORE1_EN 0x00000002ul +#define CORE_CTRL_CORE2_EN 0x00000004ul +#define CORE_CTRL_CORE3_EN 0x00000008ul +#define CORE_CTRL_CORE4_EN 0x00000010ul +#define CORE_CTRL_CORE5_EN 0x00000020ul +#define CORE_CTRL_CORE6_EN 0x00000040ul +#define CORE_CTRL_CORE7_EN 0x00000080ul +#define CORE_CTRL_CORE8_EN 0x00000100ul +#define CORE_CTRL_CORE9_EN 0x00000200ul + +// FUNC_3 registers +// ---------------- +#define HARDWARE_THERMAL_CTRL_REG 0x64 +#define SOFTWARE_THERMAL_CTRL_REG 0x68 + +#define ACPI_PSC_0_REG 0x80 // ACPI Power State Control Registers +#define ACPI_PSC_4_REG 0x84 + +#define NB_CFG_HIGH_REG 0x8C +#define POWER_CTRL_MISCELLANEOUS_REG 0xA0 +#define CLOCK_POWER_TIMING_CTRL2_REG 0xDC +#define NORTH_BRIDGE_CAPABILITIES_REG 0xE8 +#define MULTI_NODE_CPU 29 +#define CPUID_FMR 0xFC // Family / Model registers +#define DOWNCORE_CTRL 0x190 // Downcore Control Register + +#define LINK_TO_XCS_TOKEN_COUNT_REG_3X148 0x148 +#define REG_HT4_PHY_OFFSET_BASE_4X180 0x180 +#define REG_HT4_PHY_DATA_PORT_BASE_4X184 0x184 + +// FUNC_5 registers +// ---------------- +#define COMPUTE_UNIT_STATUS 0x80 +#define NORTH_BRIDGE_CAPABILITIES_2_REG 0x84 + + +// Misc. defines. +#define PCI_DEV_BASE 24 + +#define CPUID_STEPPING_MASK 0x0000000Ful +#define CPUID_BASE_MODEL_MASK 0x000000F0ul +#define CPUID_BASE_FAMILY_MASK 0x00000F00ul +#define CPUID_EXT_MODEL_MASK 0x000F0000ul +#define CPUID_EXT_FAMILY_MASK 0x0FF00000ul + +#define TN_SOCKET_FP2 0 +#define TN_SOCKET_FS1 1 +#define TN_SOCKET_FM2 2 +#define KV_SOCKET_FP3 0 +#define KV_SOCKET_FM2r2 1 +#define CZ_SOCKET_FP4 0 /// @todo : update value when BKDG updates +#define CZ_SOCKET_FM2r2 1 /// @todo : update value when BKDG updates +#define KB_SOCKET_FT3 0 +#define KB_SOCKET_FS1b 1 +#define ML_SOCKET_FT3b 0 +#define SOCKET_IGNORE 0xF + +#define LAPIC_BASE_ADDR_MASK 0x0000FFFFFFFFF000ull +#define APIC_EXT_BRDCST_MASK 0x000E0000ul +#define APIC_ENABLE_BIT 0x00000800ul +#define LOCAL_APIC_ADDR 0xFEE00000ul +#define INT_CMD_REG_LO 0x300 +#define INT_CMD_REG_HI 0x310 +#define REMOTE_MSG_REG 0x380 +#define REMOTE_READ_REG 0xC0 +#define APIC_ID_REG 0x20 +#define APIC20_ApicId 24 +#define CMD_REG_TO_READ_DATA 0x338 + +#define MAX_CORE_ID_SIZE 8 +#define MAX_CORE_ID_MASK ((1 << MAX_CORE_ID_SIZE) - 1) + +/*------------------------- + * Default definitions + *------------------------- + */ +#define DOWNCORE_MASK_SINGLE 0xFFFFFFFEul +#define DOWNCORE_MASK_DUAL 0xFFFFFFFCul +#define DOWNCORE_MASK_TRI 0xFFFFFFF8ul +#define DOWNCORE_MASK_FOUR 0xFFFFFFF0ul +#define DOWNCORE_MASK_FIVE 0xFFFFFFE0ul +#define DOWNCORE_MASK_SIX 0xFFFFFFC0ul +#define DOWNCORE_MASK_SEVEN 0xFFFFFF80ul +#define DOWNCORE_MASK_EIGHT 0xFFFFFF00ul +#define DOWNCORE_MASK_TEN 0xFFFFFC00ul +#define DOWNCORE_MASK_TWELVE 0xFFFFF000ul +#define DOWNCORE_MASK_FOURTEEN 0xFFFFC000ul +#define DOWNCORE_MASK_DUAL_COMPUTE_UNIT 0xFFFFFFFAul +#define DOWNCORE_MASK_TRI_COMPUTE_UNIT 0xFFFFFFEAul +#define DOWNCORE_MASK_FOUR_COMPUTE_UNIT 0xFFFFFFAAul +#define DOWNCORE_MASK_FIVE_COMPUTE_UNIT 0xFFFFFEAAul +#define DOWNCORE_MASK_SIX_COMPUTE_UNIT 0xFFFFFAAAul +#define DOWNCORE_MASK_SEVEN_COMPUTE_UNIT 0xFFFFEAAAul +#define DOWNCORE_MASK_EIGHT_COMPUTE_UNIT 0xFFFFAAAAul + +#define DELIVERY_STATUS BIT13 +#define REMOTE_READ_STAT_MASK 0x00030000ul +#define REMOTE_DELIVERY_PENDING 0x00010000ul +#define REMOTE_DELIVERY_DONE 0x00020000ul + +/* + * -------------------------------------------------------------------------------------- + * + * D E F I N E S / T Y P E D E F S / S T R U C T U R E S + * + * -------------------------------------------------------------------------------------- + */ + +/// CpuEarly param type +typedef struct { + IN UINT8 MemInitPState; ///< Pstate value during memory initial + IN PLATFORM_CONFIGURATION PlatformConfig; ///< Runtime configurable user options +} AMD_CPU_EARLY_PARAMS; + +/// CPUID +typedef enum { + REG_EAX, ///< EAX + REG_EBX, ///< EBX + REG_ECX, ///< ECX + REG_EDX ///< EDX +} CPUID_REG; + +#endif // _CPU_REGISTERS_H_ + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/CPU/heapManager.h b/src/vendorcode/amd/pi/00730F01/Proc/CPU/heapManager.h new file mode 100644 index 0000000000..7a278ef11a --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/CPU/heapManager.h @@ -0,0 +1,258 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Heap Manager and Heap Allocation APIs, and related functions. + * + * Contains code that initialize, maintain, and allocate the heap space. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _HEAP_MANAGER_H_ +#define _HEAP_MANAGER_H_ + +/*--------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *--------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *--------------------------------------------------------------------------------------- + */ +#define AMD_MTRR_VARIABLE_BASE0 0x200 +#define AMD_MTRR_VARIABLE_HEAP_BASE 0x20A +#define AMD_MTRR_VARIABLE_HEAP_MASK (AMD_MTRR_VARIABLE_HEAP_BASE + 1) + +#define AMD_HEAP_START_ADDRESS 0x400000ul +#define AMD_HEAP_REGION_END_ADDRESS 0xBFFFFFul +#define AMD_HEAP_SIZE_PER_CORE 0x010000ul +#define AMD_HEAP_INVALID_HEAP_OFFSET 0xFFFFFFFFul +#define AMD_HEAP_MTRR_MASK ((0xFFFFFFFFFFFFF800ull & (((UINT64)AMD_HEAP_SIZE_PER_CORE ^ (-1)) + 1)) | 0x800) +#define AMD_HEAP_SIZE_DWORD_PER_CORE (AMD_HEAP_SIZE_PER_CORE / 4) + +#define AMD_TEMP_TOM 0x20000000ul // Set TOM to 512 MB (temporary value) +#define AMD_VAR_MTRR_ENABLE_BIT 0x100000ul // bit 20 + +#define AMD_HEAP_RAM_ADDRESS 0xB0000ul + +#define HEAP_SIGNATURE_VALID 0x50414548ul // Signature: 'HEAP' +#define HEAP_SIGNATURE_INVALID 0x00000000ul // Signature cleared + +///Heap Manager Life cycle +#define HEAP_DO_NOT_EXIST_YET 1 +#define HEAP_LOCAL_CACHE 2 +#define HEAP_TEMP_MEM 3 +#define HEAP_SYSTEM_MEM 4 +#define HEAP_DO_NOT_EXIST_ANYMORE 5 +#define HEAP_S3_RESUME 6 +#define HEAP_RUNTIME_SYSTEM_MEM 7 + +///Heap callout +#define HEAP_CALLOUT_BOOTTIME 0 +#define HEAP_CALLOUT_RUNTIME 1 + +#define AMD_MTRR_FIX64k_00000 0x250 +#define AMD_MTRR_FIX16k_80000 0x258 +#define AMD_MTRR_FIX16k_A0000 0x259 +#define AMD_MTRR_FIX4k_C0000 0x268 +#define AMD_MTRR_FIX4k_C8000 0x269 +#define AMD_MTRR_FIX4k_D0000 0x26A +#define AMD_MTRR_FIX4k_D8000 0x26B +#define AMD_MTRR_FIX4k_E0000 0x26C +#define AMD_MTRR_FIX4k_E8000 0x26D +#define AMD_MTRR_FIX4k_F0000 0x26E +#define AMD_MTRR_FIX4k_F8000 0x26F + +#define AMD_MTRR_FIX64K_WB_DRAM 0x1E +#define AMD_MTRR_FIX64K_WT_DRAM 0x1C +#define AMD_MTRR_FIX64K_UC_DRAM 0x18 +#define AMD_MTRR_FIX16K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX16K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX16K_UC_DRAM 0x1818181818181818ull +#define AMD_MTRR_FIX4K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull +#define AMD_MTRR_FIX4K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull +#define AMD_MTRR_FIX4K_UC_DRAM 0x1818181818181818ull + +/*--------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *--------------------------------------------------------------------------------------- + */ +/// Allocate Heap Parameters +typedef struct _ALLOCATE_HEAP_PARAMS { + UINT32 RequestedBufferSize; ///< Size of buffer. + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 *BufferPtr; ///< Pointer to buffer. +} ALLOCATE_HEAP_PARAMS; + +/// Locate Heap Parameters +typedef struct _LOCATE_HEAP_PTR { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Data buffer size. + UINT8 *BufferPtr; ///< Pointer to buffer. +} LOCATE_HEAP_PTR; + +/// Heap Node Header +typedef struct _BUFFER_NODE { + UINT32 BufferHandle; ///< An unique ID of buffer. + UINT32 BufferSize; ///< Size of buffer. + UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate. + UINT8 PadSize; ///< Size of pad. + UINT32 OffsetOfNextNode; ///< Offset of next node (relative to the base). +} BUFFER_NODE; + +/// Heap Manager +typedef struct _HEAP_MANAGER { + UINT32 Signature; ///< a signature to indicate if the heap is valid. + UINT32 UsedSize; ///< Used size of heap. + UINT32 FirstActiveBufferOffset; ///< Offset of the first active buffer. + UINT32 FirstFreeSpaceOffset; ///< Offset of the first free space. +} HEAP_MANAGER; + +/// AGESA Buffer Handles (These are reserved) +typedef enum { + AMD_INIT_RESET_HANDLE = 0x000A000, ///< Assign 0x000A000 buffer handle to AmdInitReset routine. + AMD_INIT_EARLY_HANDLE, ///< Assign 0x000A001 buffer handle to AmdInitEarly routine. + AMD_INIT_POST_HANDLE, ///< Assign 0x000A002 buffer handle to AmdInitPost routine. + AMD_INIT_ENV_HANDLE, ///< Assign 0x000A003 buffer handle to AmdInitEnv routine. + AMD_INIT_MID_HANDLE, ///< Assign 0x000A004 buffer handle to AmdInitMid routine. + AMD_INIT_LATE_HANDLE, ///< Assign 0x000A005 buffer handle to AmdInitLate routine. + AMD_INIT_RESUME_HANDLE, ///< Assign 0x000A006 buffer handle to AmdInitResume routine. + AMD_LATE_RUN_AP_TASK_HANDLE, ///< Assign 0x000A007 buffer handle to AmdLateRunApTask routine. + AMD_S3_SAVE_HANDLE, ///< Assign 0x000A008 buffer handle to AmdS3Save routine. + AMD_S3_LATE_RESTORE_HANDLE, ///< Assign 0x000A009 buffer handle to AmdS3LateRestore routine. + AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, ///< Assign 0x000A00A buffer handle to be used for S3 save table + AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, ///< Assign 0x000A00B buffer handle to be used for S3 save table + AMD_CPU_AP_TASKING_HANDLE, ///< Assign 0x000A00C buffer handle to AP tasking input parameters. + AMD_REC_MEM_SOCKET_HANDLE, ///< Assign 0x000A00D buffer handle to save socket with memory in memory recovery mode. + AMD_MEM_AUTO_HANDLE, ///< Assign 0x000A00E buffer handle to AmdMemAuto routine. + AMD_MEM_SPD_HANDLE, ///< Assign 0x000A00F buffer handle to AmdMemSpd routine. + AMD_MEM_DATA_HANDLE, ///< Assign 0x000A010 buffer handle to MemData + AMD_MEM_TRAIN_BUFFER_HANDLE, ///< Assign 0x000A011 buffer handle to allocate buffer for training + AMD_MEM_S3_DATA_HANDLE, ///< Assign 0x000A012 buffer handle to special case register for S3 + AMD_MEM_S3_NB_HANDLE, ///< Assign 0x000A013 buffer handle to NB block for S3 + AMD_MEM_S3_MR0_DATA_HANDLE, ///< Assign 0x000A014 buffer handle to MR0 data block for S3 + AMD_UMA_INFO_HANDLE, ///< Assign 0x000A015 buffer handle to be used for Uma information + AMD_DMI_MEM_DEV_INFO_HANDLE, ///< Assign 0x000A016 buffer handle to DMI Type16 17 19 20 information + EVENT_LOG_BUFFER_HANDLE, ///< Assign 0x000A017 buffer handle to Event Log + IDS_CONTROL_HANDLE, ///< Assign 0x000A018 buffer handle to AmdIds routine. + IDS_HDT_OUT_BUFFER_HANDLE, ///< Assign 0x000A019 buffer handle to be used for HDTOUT support. + IDS_CHECK_POINT_PERF_HANDLE, ///< Assign 0x000A01A buffer handle to Performance analysis + AMD_PCIE_COMPLEX_DATA_HANDLE, ///< Assign 0x000A01B buffer handle to be used for PCIe support + AMD_MEM_SYS_DATA_HANDLE, ///< Assign 0x000A01C buffer handle to be used for memory data structure + AMD_GNB_SMU_CONFIG_HANDLE, ///< Assign 0x000A01D buffer handle to be used for GNB SMU configuration + AMD_PP_FUSE_TABLE_HANDLE, ///< Assign 0x000A01E buffer handle to be used for TT fuse table + AMD_GFX_PLATFORM_CONFIG_HANDLE, ///< Assign 0x000A01F buffer handle to be used for Gfx platform configuration + AMD_GNB_TEMP_DATA_HANDLE, ///< Assign 0x000A020 buffer handle for GNB general purpose data block + AMD_MEM_2D_RDQS_HANDLE, ///< Assign 0x000A021 buffer handle for 2D training + AMD_MEM_2D_RD_WR_HANDLE, ///< Assign 0x000A022 buffer handle for 2D Read/Write training + AMD_GNB_IOMMU_SCRATCH_MEM_HANDLE, ///< Assign 0x000A023 buffer handle to be used for GNB IOMMU scratch memory + AMD_MEM_S3_SAVE_HANDLE, ///< Assign 0x000A024 buffer handle for memory data saved right after memory init + AMD_MEM_2D_RDQS_RIM_HANDLE, ///< Assign 0x000A025 buffer handle for 2D training Eye RIM Search + AMD_MEM_2D_RD_WR_RIM_HANDLE, ///< Assign 0x000A026 buffer handle for 2D Read/Write training Eye RIM Search + AMD_CPU_NB_PSTATE_FIXUP_HANDLE, ///< Assign 0x000A027 buffer handle for an NB P-state workaround + AMD_MEM_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000A028 buffer handle for CRAT Memory affinity component structure + AMD_SKIP_MEM_S3_SAVE, ///< Assign 0x000A029 buffer handle for the flag to skip memory S3 save + AMD_SCS_SMU_RAM_INFO, ///< Assign 0x000A02A buffer handle for keeping the result of SMU SCS service + AMD_SCS_HWP0_FREQ, ///< Assign 0x000A02B buffer handler for keeping frequency of HWP0 + AMD_IS_FEATURE_ENABLED, ///< Assign 0x000A02C buffer handle for keeping the result of IsFeatureEnabled + AMD_MEM_DATAEYE_WORK_AREA_HANDLE, ///< Assign 0x000A02D buffer handle for Composite Data Eye Compression Work Area + AMD_GNB_SAMU_PATCH_HANDLE, ///< Assign 0x000A02E buffer handle for Samu patch buffer + AMD_GNB_SAMU_BOOT_CONTROL_HANDLE, ///< Assign 0x000A02F buffer handle for Samu boot control buffer + AMD_GNB_ACP_ENGINE_HANDLE, ///< Assign 0x000A030 buffer handle for GNB ACP engine buffer + AMD_MEM_PMU_SRAM_MSG_BLOCK_HANDLE, ///< Assign 0x000A031 buffer handle for PMU SRAM Message Block buffer + AMD_MEM_DRAM_CAD_BUS_CONFIG_HANDLE, ///< Assign 0x000A033 buffer handle for DRAM CAD Bus Configuration + AMD_GNB_SMU_TABLE_HANDLE, ///< Assign 0x000A034 buffer handle for GNB SMU table buffer + AMD_GNB_CRAT_HSA_TABLE_HANDLE, ///< Assign 0x000A035 buffer handle for GNB CRAT HSA unit table + AMD_GNB_BUILD_OPTIONS_HANDLE, ///< Assign 0x000A036 buffer handle for GNB build options + AMD_MEM_MISC_HANDLES_START = 0x1000000, ///< Reserve 0x1000000 to 0x1FFFFFF buffer handle + AMD_MEM_MISC_HANDLES_END = 0x1FFFFFF, ///< miscellaneous memory init tasks' buffers. + AMD_HEAP_IN_MAIN_MEMORY_HANDLE = 0x8000000, ///< Assign 0x8000000 to AMD_HEAP_IN_MAIN_MEMORY_HANDLE. + SOCKET_DIE_MAP_HANDLE = 0x534F4B54, ///< 'sokt' + NODE_ID_MAP_HANDLE = 0x4E4F4445, ///< 'node' + HOP_COUNT_TABLE_HANDLE = 0x484F5053, ///< 'hops' + AMD_FCH_RESET_DATA_BLOCK_HANDLE = 0x46434852, ///< 'FCHR' Buffer handle for FCH private data block at InitReset + AMD_FCH_DATA_BLOCK_HANDLE = 0x46434845, ///< 'FCHE' Buffer handle for FCH private data block at InitEnv + IDS_TRAP_TABLE_HANDLE = 0x49524547, ///< 'IREG' Handle for IDS register table + IDS_SAVE_IDTR_HANDLE = 0x49445452, ///< 'IDTR' + IDS_BSC_IDT_HANDLE = 0x42534349, ///< 'BSCI' BSC Idt table + IDS_NV_TO_CMOS_HANDLE = 0x534D4349, ///< 'ICMS' Handle for IDS CMOS save + IDS_GRA_HANDLE = 0x41524749, ///< 'IGRA' Handle for IDS GRA save + IDS_EXTEND_HANDLE = 0x54584549, ///< 'IEXT' Handle for IDS extend module + IDS_TEMP_DATA_HANDLE = 0x504D5459, ///< 'ITMP' Handle for IDS temp data +} AGESA_BUFFER_HANDLE; + + +/*--------------------------------------------------------------------------------------- + * F U N C T I O N P R O T O T Y P E + *--------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +HeapManagerInit ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT ALLOCATE_HEAP_PARAMS *AllocateHeapParams, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +HeapLocateBuffer ( + IN OUT LOCATE_HEAP_PTR *LocateHeap, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +UINT64 +HeapGetBaseAddress ( + IN AMD_CONFIG_PARAMS *StdHeader + ); + +AGESA_STATUS +EventLogInitialization ( + IN AMD_CONFIG_PARAMS *StdHeader + ); +#endif // _HEAP_MANAGER_H_ diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Common/AmdFch.h b/src/vendorcode/amd/pi/00730F01/Proc/Common/AmdFch.h new file mode 100644 index 0000000000..5edcf35d19 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Common/AmdFch.h @@ -0,0 +1,63 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD FCH Component + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _AMD_FCH_H_ +#define _AMD_FCH_H_ + +typedef AGESA_STATUS FCH_INIT (IN VOID *DataPtr); +typedef VOID FCH_TASK_ENTRY (IN VOID *FchCfg); + + +/// FCH API build options +typedef struct { + FCH_INIT *InitReset; ///< InitReset + FCH_INIT *InitResetConstructor; ///< InitResetConstructor + FCH_INIT *InitEnv; ///< InitEnv + FCH_INIT *InitEnvConstructor; ///< InitEnvConstructor + FCH_INIT *InitMid; ///< InitMid + FCH_INIT *InitMidConstructor; ///< InitMidConstructor + FCH_INIT *InitLate; ///< InitLate + FCH_INIT *InitLateConstructor; ///< InitLateConstructor +} BLDOPT_FCH_FUNCTION; + +#endif diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/AcpiLib.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/AcpiLib.h new file mode 100644 index 0000000000..23fb37ca44 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/AcpiLib.h @@ -0,0 +1,91 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH ACPI lib + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FCH_ACPILIB_H_ +#define _FCH_ACPILIB_H_ +/// +/// RSDP - ACPI 2.0 table RSDP +/// +typedef struct _RSDP_HEADER { + UINT64 Signature; ///< RSDP signature "RSD PTR" + UINT8 CheckSum; ///< checksum of the first 20 bytes + UINT8 OEMID[6]; ///< OEM ID + UINT8 Revision; ///< 0 for APCI 1.0, 2 for ACPI 2.0 + UINT32 RsdtAddress; ///< physical address of RSDT + UINT32 Length; ///< total length of RSDP (including extended part) + UINT64 XsdtAddress; ///< physical address of XSDT + UINT8 ExtendedCheckSum; ///< chechsum of whole table + UINT8 Reserved[3]; ///< Reserved +} RSDP_HEADER; + +/// +/// DESCRIPTION_HEADER - ACPI common table header +/// +typedef struct _DESCRIPTION_HEADER { + UINT32 Signature; ///< ACPI signature (4 ASCII characters) + UINT32 Length; ///< Length of table, in bytes, including header + UINT8 Revision; ///< ACPI Specification minor version # + UINT8 CheckSum; ///< To make sum of entire table == 0 + UINT8 OemId[6]; ///< OEM identification + UINT8 OemTableId[8]; ///< OEM table identification + UINT32 OemRevision; ///< OEM revision number + UINT32 CreatorId; ///< ASL compiler vendor ID + UINT32 CreatorRevision; ///< ASL compiler revision number +} DESCRIPTION_HEADER; + +/// +/// _AcpiRegWrite - ACPI MMIO register R/W structure +/// +typedef struct _ACPI_REG_WRITE { + UINT8 MmioBase; /// MmioBase: Index of Fch block (For instance GPIO_BASE:0x01 SMI_BASE:0x02) + UINT8 MmioReg; /// MmioReg : Register index + UINT8 DataAndMask; /// DataANDMask : AND Register Data + UINT8 DataOrMask; /// DataOrMask : Or Register Data +} ACPI_REG_WRITE; + +VOID* AcpiLocateTable (IN UINT32 Signature); +VOID AcpiSetTableCheckSum (IN VOID *TablePtr); +UINT8 AcpiGetTableCheckSum (IN VOID *TablePtr); +UINT8 GetByteSum (IN VOID *DataPtr, IN UINT32 Length); + +#endif diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchBiosRamUsage.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchBiosRamUsage.h new file mode 100644 index 0000000000..dcd12be43a --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchBiosRamUsage.h @@ -0,0 +1,67 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH BIOS Ram usage + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FCH_BIOS_RAM_USAGE_H_ +#define _FCH_BIOS_RAM_USAGE_H_ + +#define RESTORE_MEMORY_CONTROLLER_START 0 +#define XHCI_REGISTER_BAR00 0xD0 +#define XHCI_REGISTER_BAR01 0xD1 +#define XHCI_REGISTER_BAR02 0xD2 +#define XHCI_REGISTER_BAR03 0xD3 +#define XHCI_REGISTER_04H 0xD4 +#define XHCI_REGISTER_0CH 0xD5 +#define XHCI_REGISTER_3CH 0xD6 +#define XHCI1_REGISTER_BAR00 0xE0 +#define XHCI1_REGISTER_BAR01 0xE1 +#define XHCI1_REGISTER_BAR02 0xE2 +#define XHCI1_REGISTER_BAR03 0xE3 +#define XHCI1_REGISTER_04H 0xE4 +#define XHCI1_REGISTER_0CH 0xE5 +#define XHCI1_REGISTER_3CH 0xE6 +#define RTC_WORKAROUND_DATA_START 0xF0 +#define BOOT_TIME_FLAG_SEC 0xF8 +#define BOOT_TIME_FLAG_INT19 0xFC + +#endif + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchCommonCfg.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchCommonCfg.h new file mode 100644 index 0000000000..72e6aeb857 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchCommonCfg.h @@ -0,0 +1,1296 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH Function Support Definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FCH_COMMON_CFG_H_ +#define _FCH_COMMON_CFG_H_ + +#pragma pack (push, 1) + +//----------------------------------------------------------------------------- +// FCH DEFINITIONS AND MACROS +//----------------------------------------------------------------------------- + +// +// FCH Component Data Structure Definitions +// + +/// PCI_ADDRESS - PCI access structure +#define PCI_ADDRESS(bus, dev, func, reg) \ + (UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +#define CPUID_FMF 0x80000001ul // Family Model Features information +/// +/// - Byte Register R/W structure +/// +typedef struct _REG8_MASK { + UINT8 RegIndex; /// RegIndex - Reserved + UINT8 AndMask; /// AndMask - Reserved + UINT8 OrMask; /// OrMask - Reserved +} REG8_MASK; + + +/// +/// PCIE Reset Block +/// +typedef enum { + NbBlock, ///< Reset for NB PCIE + FchBlock ///< Reset for FCH GPP +} RESET_BLOCK; + +/// +/// PCIE Reset Operation +/// +typedef enum { + DeassertReset, ///< DeassertRese - Deassert reset + AssertReset ///< AssertReset - Assert reset +} RESET_OP; + + +/// +/// SD structure +/// +typedef struct { + SD_MODE SdConfig; ///< SD Mode configuration + /// @li <b>00</b> - Disabled + /// @li <b>00</b> - AMDA + /// @li <b>01</b> - DMA + /// @li <b>10</b> - PIO + /// + UINT8 SdSpeed; ///< SD Speed + /// @li <b>0</b> - Low speed + /// @li <b>1</b> - High speed + /// + UINT8 SdBitWidth; ///< SD Bit Width + /// @li <b>0</b> - 32BIT clear 23 + /// @li <b>1</b> - 64BIT, set 23,default + /// + UINT32 SdSsid; ///< SD Subsystem ID + SD_CLOCK_CONTROL SdClockControl; ///< SD Clock Control + BOOLEAN SdClockMultiplier; ///< SD Clock Multiplier enable/disable + UINT8 SdReTuningMode; ///< SD Re-tuning modes select + /// @li <b>0</b> - mode 1 + /// @li <b>1</b> - mode 2 + /// @li <b>2</b> - mode 3 + UINT8 SdHostControllerVersion; ///< SD controller Version + /// @li <b>1</b> - SD 2.0 + /// @li <b>2</b> - SD 3.0 + UINT8 SdrCapabilities; ///< SDR Capability mode select + /// @li <b>00</b> - SDR25/15 + /// @li <b>01</b> - SDR50 + /// @li <b>11</b> - SDR104 + UINT8 SdSlotType; ///< SDR Slot Type select + /// @li <b>00</b> - Removable Card Slot + /// @li <b>01</b> - Embedded Slot for One Device + /// @li <b>10</b> - Shared Bus Slot + BOOLEAN SdForce18; ///< SD Force18 +} FCH_SD; + +/// +/// CODEC_ENTRY - Fch HD Audio OEM Codec structure +/// +typedef struct _CODEC_ENTRY { + UINT8 Nid; /// Nid - Reserved + UINT32 Byte40; /// Byte40 - Reserved +} CODEC_ENTRY; + +/// +/// CODEC_TBL_LIST - Fch HD Audio Codec table list +/// +typedef struct _CODEC_TBL_LIST { + UINT32 CodecId; /// CodecID - Codec ID + CONST CODEC_ENTRY* CodecTablePtr; /// CodecTablePtr - Codec table pointer +} CODEC_TBL_LIST; + +/// +/// AZALIA_PIN - HID Azalia or GPIO define structure. +/// +typedef struct _AZALIA_PIN { + UINT8 AzaliaSdin0; ///< AzaliaSdin0 + /// @par + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin1; ///< AzaliaSdin1 + /// @par + /// SDIN1 is define at BIT2 & BIT3 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin2; ///< AzaliaSdin2 + /// @par + /// SDIN2 is define at BIT4 & BIT5 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin + + UINT8 AzaliaSdin3; ///< AzaliaSdin3 + /// @par + /// SDIN3 is define at BIT6 & BIT7 + /// @li <b>00</b> - GPIO PIN + /// @li <b>10</b> - As a Azalia SDIN pin +} AZALIA_PIN; + +/// +/// Azalia structure +/// +typedef struct { + HDA_CONFIG AzaliaEnable; ///< AzaliaEnable - Azalia function configuration + BOOLEAN AzaliaMsiEnable; ///< AzaliaMsiEnable - Azalia MSI capability + UINT32 AzaliaSsid; ///< AzaliaSsid - Azalia Subsystem ID + UINT8 AzaliaPinCfg; ///< AzaliaPinCfg - Azalia Controller SDIN pin Configuration + /// @par + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaFrontPanel; ///< AzaliaFrontPanel - Azalia Controller Front Panel Configuration + /// @par + /// Support Front Panel configuration + /// @li <b>0</b> - Auto + /// @li <b>1</b> - disable + /// @li <b>2</b> - enable + + UINT8 FrontPanelDetected; ///< FrontPanelDetected - Force Azalia Controller Front Panel Configuration + /// @par + /// Force Front Panel configuration + /// @li <b>0</b> - Not Detected + /// @li <b>1</b> - Detected + + UINT8 AzaliaSnoop; ///< AzaliaSnoop - Azalia Controller Snoop feature Configuration + /// @par + /// Azalia Controller Snoop feature Configuration + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + + UINT8 AzaliaDummy; /// AzaliaDummy - Reserved */ + + AZALIA_PIN AzaliaConfig; /// AzaliaConfig - Azaliz Pin Configuration + +/// +/// AZOEMTBL - Azalia Controller OEM Codec Table Pointer +/// + CONST CODEC_TBL_LIST *AzaliaOemCodecTablePtr; /// AzaliaOemCodecTablePtr - Oem Azalia Codec Table Pointer + +/// +/// AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer +/// + CONST VOID *AzaliaOemFpCodecTablePtr; /// AzaliaOemFpCodecTablePtr - Oem Front Panel Codec Table Pointer +} FCH_AZALIA; + +/// +/// _SPI_DEVICE_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_DEVICE_PROFILE { + UINT32 JEDEC_ID; /// JEDEC ID + UINT32 RomSize; /// ROM Size + UINT32 SectorSize; /// Sector Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed + UINT8 QeReadRegister; /// QE Read Register + UINT8 QeWriteRegister; /// QE Write Register + UINT8 QeOperateSize; /// QE Operate Size 1byte/2bytes + UINT16 QeLocation; // QE Location in the register +} SPI_DEVICE_PROFILE; + +/// +/// _SPI_CONTROLLER_PROFILE Spi Device Profile structure +/// +typedef struct _SPI_CONTROLLER_PROFILE { +// UINT32 SPI_CONTROLLER_ID; /// SPI Controller ID + UINT16 FifoSize; /// FIFO Size + UINT16 MaxNormalSpeed; /// Max Normal Speed + UINT16 MaxFastSpeed; /// Max Fast Speed + UINT16 MaxDualSpeed; /// Max Dual Speed + UINT16 MaxQuadSpeed; /// Max Quad Speed +} SPI_CONTROLLER_PROFILE; + +/// +/// SPI structure +/// +typedef struct { + BOOLEAN LpcMsiEnable; ///< LPC MSI capability + UINT32 LpcSsid; ///< LPC Subsystem ID + UINT32 RomBaseAddress; ///< SpiRomBaseAddress + /// @par + /// SPI ROM BASE Address + /// + UINT8 SpiSpeed; ///< SpiSpeed - Spi Frequency + /// @par + /// SPI Speed [1.0] - the clock speed for non-fast read command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiFastSpeed; ///< FastSpeed - Spi Fast Speed feature + /// SPIFastSpeed [1.0] - the clock speed for Fast Speed Feature + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 WriteSpeed; ///< WriteSpeed - Spi Write Speed + /// @par + /// WriteSpeed [1.0] - the clock speed for Spi write command + /// @li <b>00</b> - 66Mhz + /// @li <b>01</b> - 33Mhz + /// @li <b>10</b> - 22Mhz + /// @li <b>11</b> - 16.5Mhz + /// + UINT8 SpiMode; ///< SpiMode - Spi Mode Setting + /// @par + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< AutoMode - Spi Auto Mode + /// @par + /// SPI Auto Mode + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + /// + UINT8 SpiBurstWrite; ///< SpiBurstWrite - Spi Burst Write Mode + /// @par + /// SPI Burst Write + /// @li <b>0</b> - Disabled + /// @li <b>1</b> - Enabled + BOOLEAN LpcClk0; ///< Lclk0En - LPCCLK0 + /// @par + /// LPC Clock 0 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol + BOOLEAN LpcClk1; ///< Lclk1En - LPCCLK1 + /// @par + /// LPC Clock 1 mode + /// @li <b>0</b> - forced to stop + /// @li <b>1</b> - functioning with CLKRUN protocol +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; /// + SPI_DEVICE_PROFILE SpiDeviceProfile; /// Spi Device Profile +} FCH_SPI; + + +/// +/// IDE structure +/// +typedef struct { + BOOLEAN IdeEnable; ///< IDE function switch + BOOLEAN IdeMsiEnable; ///< IDE MSI capability + UINT32 IdeSsid; ///< IDE controller Subsystem ID +} FCH_IDE; + +/// +/// IR Structure +/// +typedef struct { + IR_CONFIG IrConfig; ///< IrConfig + UINT8 IrPinControl; ///< IrPinControl +} FCH_IR; + + +/// +/// PCI Bridge Structure +/// +typedef struct { + BOOLEAN PcibMsiEnable; ///< PCI-PCI Bridge MSI capability + UINT32 PcibSsid; ///< PCI-PCI Bridge Subsystem ID + UINT8 PciClks; ///< 33MHz PCICLK0/1/2/3 Enable, bits [0:3] used + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT16 PcibClkStopOverride; ///< PCIB_CLK_Stop Override + BOOLEAN PcibClockRun; ///< Enable the auto clkrun functionality + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// +} FCH_PCIB; + + +/// +/// - SATA Phy setting structure +/// +typedef struct _SATA_PHY_SETTING { + UINT16 PhyCoreControlWord; /// PhyCoreControlWord - Reserved + UINT32 PhyFineTuneDword; /// PhyFineTuneDword - Reserved +} SATA_PHY_SETTING; + +/// +/// SATA main setting structure +/// +typedef struct _SATA_ST { + UINT8 SataModeReg; ///< SataModeReg - Sata Controller Mode + BOOLEAN SataEnable; ///< SataEnable - Sata Controller Function + /// @par + /// Sata Controller + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 Sata6AhciCap; ///< Sata6AhciCap - Reserved */ + BOOLEAN SataSetMaxGen2; ///< SataSetMaxGen2 - Set Sata Max Gen2 mode + /// @par + /// Sata Controller Set to Max Gen2 mode + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN IdeEnable; ///< IdeEnable - Hidden IDE + /// @par + /// Sata IDE Controller Combined Mode + /// Enable - SATA controller has control over Port0 through Port3, + /// IDE controller has control over Port4 and Port7. + /// Disable - SATA controller has full control of all 8 Ports + /// when operating in non-IDE mode. + /// @li <b>0</b> - enable + /// @li <b>1</b> - disable + /// + UINT8 SataClkMode; /// SataClkMode - Reserved +} SATA_ST; + +/// +/// SATA_PORT_ST - SATA PORT structure +/// +typedef struct _SATA_PORT_ST { + UINT8 SataPortReg; ///< SATA Port bit map - bits[0:7] for ports 0 ~ 7 + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + BOOLEAN Port0; ///< PORT0 - 0:disable, 1:enable + BOOLEAN Port1; ///< PORT1 - 0:disable, 1:enable + BOOLEAN Port2; ///< PORT2 - 0:disable, 1:enable + BOOLEAN Port3; ///< PORT3 - 0:disable, 1:enable + BOOLEAN Port4; ///< PORT4 - 0:disable, 1:enable + BOOLEAN Port5; ///< PORT5 - 0:disable, 1:enable + BOOLEAN Port6; ///< PORT6 - 0:disable, 1:enable + BOOLEAN Port7; ///< PORT7 - 0:disable, 1:enable +} SATA_PORT_ST; + +/// +///< _SATA_PORT_MD - Force Each PORT to GEN1/GEN2 mode +/// +typedef struct _SATA_PORT_MD { + UINT16 SataPortMode; ///< SATA Port GEN1/GEN2 mode bit map - bits [0:15] for ports 0 ~ 7 + UINT8 Port0; ///< PORT0 - set BIT0 to GEN1, BIT1 - PORT0 set to GEN2 + UINT8 Port1; ///< PORT1 - set BIT2 to GEN1, BIT3 - PORT1 set to GEN2 + UINT8 Port2; ///< PORT2 - set BIT4 to GEN1, BIT5 - PORT2 set to GEN2 + UINT8 Port3; ///< PORT3 - set BIT6 to GEN1, BIT7 - PORT3 set to GEN2 + UINT8 Port4; ///< PORT4 - set BIT8 to GEN1, BIT9 - PORT4 set to GEN2 + UINT8 Port5; ///< PORT5 - set BIT10 to GEN1, BIT11 - PORT5 set to GEN2 + UINT8 Port6; ///< PORT6 - set BIT12 to GEN1, BIT13 - PORT6 set to GEN2 + UINT8 Port7; ///< PORT7 - set BIT14 to GEN1, BIT15 - PORT7 set to GEN2 +} SATA_PORT_MD; +/// +/// SATA structure +/// +typedef struct { + BOOLEAN SataMsiEnable; ///< SATA MSI capability + UINT32 SataIdeSsid; ///< SATA IDE mode SSID + UINT32 SataRaidSsid; ///< SATA RAID mode SSID + UINT32 SataRaid5Ssid; ///< SATA RAID 5 mode SSID + UINT32 SataAhciSsid; ///< SATA AHCI mode SSID + + SATA_ST SataMode; /// SataMode - Reserved + SATA_CLASS SataClass; ///< SataClass - SATA Controller mode [2:0] + UINT8 SataIdeMode; ///< SataIdeMode - Sata IDE Controller mode + /// @par + /// @li <b>0</b> - Legacy IDE mode + /// @li <b>1</b> - Native IDE mode + /// + UINT8 SataDisUnusedIdePChannel; ///< SataDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataDisUnusedIdeSChannel; ///< SataDisUnusedIdeSChannel - Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdePChannel; ///< IdeDisUnusedIdePChannel-Disable Unused IDE Primary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 IdeDisUnusedIdeSChannel; ///< IdeDisUnusedIdeSChannel-Disable Unused IDE Secondary Channel + /// @par + /// @li <b>0</b> - Channel Enable + /// @li <b>1</b> - Channel Disable + /// + UINT8 SataOptionReserved; /// SataOptionReserved - Reserved + + SATA_PORT_ST SataEspPort; ///< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:) + + SATA_PORT_ST SataPortPower; ///< SataPortPower - Port Power configuration + + SATA_PORT_MD SataPortMd; ///< SataPortMd - Port Mode + + UINT8 SataAggrLinkPmCap; /// SataAggrLinkPmCap - 0:OFF 1:ON + UINT8 SataPortMultCap; /// SataPortMultCap - 0:OFF 1:ON + UINT8 SataClkAutoOff; /// SataClkAutoOff - AutoClockOff 0:Disabled, 1:Enabled + UINT8 SataPscCap; /// SataPscCap 1:Enable PSC, 0:Disable PSC capability + UINT8 BiosOsHandOff; /// BiosOsHandOff - Reserved + UINT8 SataFisBasedSwitching; /// SataFisBasedSwitching - Reserved + UINT8 SataCccSupport; /// SataCccSupport - Reserved + UINT8 SataSscCap; /// SataSscCap - 1:Enable, 0:Disable SSC capability + UINT8 SataMsiCapability; /// SataMsiCapability 0:Hidden 1:Visible + UINT8 SataForceRaid; /// SataForceRaid 0:No function 1:Force RAID + UINT8 SataInternal100Spread; /// SataInternal100Spread - Reserved + UINT8 SataDebugDummy; /// SataDebugDummy - Reserved + UINT8 SataTargetSupport8Device; /// SataTargetSupport8Device - Reserved + UINT8 SataDisableGenericMode; /// SataDisableGenericMode - Reserved + BOOLEAN SataAhciEnclosureManagement; /// SataAhciEnclosureManagement - Reserved + UINT8 SataSgpio0; /// SataSgpio0 - Reserved + UINT8 SataSgpio1; /// SataSgpio1 - Reserved + UINT8 SataPhyPllShutDown; /// SataPhyPllShutDown - Reserved + BOOLEAN SataHotRemovalEnh; /// SataHotRemovalEnh - Reserved + + SATA_PORT_ST SataHotRemovalEnhPort; ///< SataHotRemovalEnhPort - Hot Remove + + BOOLEAN SataOobDetectionEnh; /// SataOobDetectionEnh - TRUE + BOOLEAN SataPowerSavingEnh; /// SataPowerSavingEnh - TRUE + UINT8 SataMemoryPowerSaving; /// SataMemoryPowerSaving - 0-3 Default [3] + BOOLEAN SataRasSupport; /// SataRasSupport - Support RAS function TRUE: Enable FALSE: Disable + BOOLEAN SataAhciDisPrefetchFunction; /// SataAhciDisPrefetchFunction - Disable AHCI Prefetch Function Support + BOOLEAN SataDevSlpPort0; /// SataDevSlpPort0 - Reserved + BOOLEAN SataDevSlpPort1; /// SataDevSlpPort1 - Reserved + UINT32 TempMmio; /// TempMmio - Reserved +} FCH_SATA; + + +// +// IMC Message Register Software Interface +// +#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3) + +#define MSG_SYS_TO_IMC 0x80 +#define Fun_80 0x80 +#define Fun_81 0x81 +#define Fun_82 0x82 +#define Fun_83 0x83 +#define Fun_84 0x84 +#define Fun_85 0x85 +#define Fun_86 0x86 +#define Fun_87 0x87 +#define Fun_88 0x88 +#define Fun_89 0x89 +#define Fun_90 0x90 +#define MSG_IMC_TO_SYS 0x81 +#define MSG_REG0 0x82 +#define MSG_REG1 0x83 +#define MSG_REG2 0x84 +#define MSG_REG3 0x85 +#define MSG_REG4 0x86 +#define MSG_REG5 0x87 +#define MSG_REG6 0x88 +#define MSG_REG7 0x89 +#define MSG_REG8 0x8A +#define MSG_REG9 0x8B +#define MSG_REGA 0x8C +#define MSG_REGB 0x8D +#define MSG_REGC 0x8E +#define MSG_REGD 0x8F + +#define DISABLED 0 +#define ENABLED 1 + + + +/// +/// EC structure +/// +typedef struct _FCH_EC { + UINT8 MsgFun81Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone0MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone0MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone0MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone0MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone0MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone0MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone0MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone0MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +// EC LDN9 function 81 zone 1 +// + UINT8 MsgFun81Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone1MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone1MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone1MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone1MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone1MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone1MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone1MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone1MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 2 +// + UINT8 MsgFun81Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone2MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone2MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone2MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone2MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone2MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone2MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone2MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone2MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 81 zone 3 +// + UINT8 MsgFun81Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun81Zone3MsgReg2; ///<Thermal zone control byte 1 + UINT8 MsgFun81Zone3MsgReg3; ///<Thermal zone control byte 2 + UINT8 MsgFun81Zone3MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius. + UINT8 MsgFun81Zone3MsgReg5; ///<Hysteresis information + UINT8 MsgFun81Zone3MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 + UINT8 MsgFun81Zone3MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located. + UINT8 MsgFun81Zone3MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage + UINT8 MsgFun81Zone3MsgReg9; ///<Fan PWM ramping rate in 5ms unit +// +//EC LDN9 function 83 zone 0 +// + UINT8 MsgFun83Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone0MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone0MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone0MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone0MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone0MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone0MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone0MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone0MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone0MsgRegA; ///<_CRT + UINT8 MsgFun83Zone0MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 1 +// + UINT8 MsgFun83Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone1MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone1MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone1MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone1MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone1MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone1MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone1MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone1MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone1MsgRegA; ///<_CRT + UINT8 MsgFun83Zone1MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 2 +// + UINT8 MsgFun83Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone2MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone2MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone2MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone2MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone2MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone2MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone2MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone2MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone2MsgRegA; ///<_CRT + UINT8 MsgFun83Zone2MsgRegB; ///<_PSV +// +//EC LDN9 function 83 zone 3 +// + UINT8 MsgFun83Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun83Zone3MsgReg2; ///<_AC0 + UINT8 MsgFun83Zone3MsgReg3; ///<_AC1 + UINT8 MsgFun83Zone3MsgReg4; ///<_AC2 + UINT8 MsgFun83Zone3MsgReg5; ///<_AC3 + UINT8 MsgFun83Zone3MsgReg6; ///<_AC4 + UINT8 MsgFun83Zone3MsgReg7; ///<_AC5 + UINT8 MsgFun83Zone3MsgReg8; ///<_AC6 + UINT8 MsgFun83Zone3MsgReg9; ///<_AC7 + UINT8 MsgFun83Zone3MsgRegA; ///<_CRT + UINT8 MsgFun83Zone3MsgRegB; ///<_PSV +// +//EC LDN9 function 85 zone 0 +// + UINT8 MsgFun85Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone0MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone0MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 1 +// + UINT8 MsgFun85Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone1MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone1MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 2 +// + UINT8 MsgFun85Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone2MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone2MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 85 zone 3 +// + UINT8 MsgFun85Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun85Zone3MsgReg2; ///<AL0 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg3; ///<AL1 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg4; ///<AL2 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg5; ///<AL3 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg6; ///<AL4 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg7; ///<AL5 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg8; ///<AL6 PWM level in percentage (0 - 100%) + UINT8 MsgFun85Zone3MsgReg9; ///<AL7 PWM level in percentage (0 - 100%) +// +//EC LDN9 function 89 TEMPIN channel 0 +// + UINT8 MsgFun89Zone0MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone0MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone0MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone0MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone0MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone0MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 1 +// + UINT8 MsgFun89Zone1MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone1MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone1MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone1MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone1MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone1MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 2 +// + UINT8 MsgFun89Zone2MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone2MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone2MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone2MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone2MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone2MsgRegA; ///<Mode bit 0-7 +// +//EC LDN9 function 89 TEMPIN channel 3 +// + UINT8 MsgFun89Zone3MsgReg0; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg1; ///<Thermal zone + UINT8 MsgFun89Zone3MsgReg2; ///<At DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg3; ///<At DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg4; ///<At DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg5; ///<At DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgReg6; ///<Ct DWORD bit 0-7 + UINT8 MsgFun89Zone3MsgReg7; ///<Ct DWORD bit 15-8 + UINT8 MsgFun89Zone3MsgReg8; ///<Ct DWORD bit 23-16 + UINT8 MsgFun89Zone3MsgReg9; ///<Ct DWORD bit 31-24 + UINT8 MsgFun89Zone3MsgRegA; ///<Mode bit 0-7 +// +// FLAG for Fun83/85/89 support +// + UINT16 IMCFUNSupportBitMap; ///< Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3; +} FCH_EC; + +/// +/// IMC structure +/// +typedef struct _FCH_IMC { + UINT8 ImcEnable; ///< ImcEnable - IMC Enable + UINT8 ImcEnabled; ///< ImcEnabled - IMC Enable + UINT8 ImcSureBootTimer; ///< ImcSureBootTimer - IMc SureBootTimer function + FCH_EC EcStruct; ///< EC structure + UINT8 ImcEnableOverWrite; ///< OverWrite IMC with the EC structure + /// @li <b>00</b> - by default strapping + /// @li <b>01</b> - enable + /// @li <b>10</b> - disable + /// +} FCH_IMC; + + +/// +/// Hpet structure +/// +typedef struct { + BOOLEAN HpetEnable; ///< HPET function switch + + BOOLEAN HpetMsiDis; ///< HpetMsiDis - South Bridge HPET MSI Configuration + /// @par + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT32 HpetBase; ///< HpetBase + /// @par + /// HPET Base address +} FCH_HPET; + + +/// +/// GCPU related parameters +/// +typedef struct { + UINT8 AcDcMsg; ///< Send a message to CPU to indicate the power mode (AC vs battery) + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 TimerTickTrack; ///< Send a message to CPU to indicate the latest periodic timer interval + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 ClockInterruptTag; ///< Mark the periodic timer interrupt + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 OhciTrafficHanding; ///< Cause CPU to break out from C state when USB OHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 EhciTrafficHanding; ///< Cause CPU to break out from C state when USB EHCI has pending traffic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCMultiCore; ///< Track of CPU C state by monitoring each core's C state message + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable + + UINT8 GcpuMsgCStage; ///< Enable the FCH C state coordination logic + /// @li <b>1</b> - disable + /// @li <b>0</b> - enable +} FCH_GCPU; + + +/// +/// Timer +/// +typedef struct { + BOOLEAN Enable; ///< Whether to register timer SMI in POST + BOOLEAN StartNow; ///< Whether to start the SMI immediately during registration + UINT16 CycleDuration; ///< [14:0] - Actual cycle duration = CycleDuration + 1 +} TIMER_SMI; + +/// +/// CS support +/// +typedef struct { + BOOLEAN FchCsD3Cold; ///< FCH Cs D3 Cold function + BOOLEAN FchCsHwReduced; ///< FCH Cs hardware reduced ACPI flag + BOOLEAN FchCsPwrBtn; ///< FCH Cs Power Button function + BOOLEAN FchCsAcDc; ///< FCH Cs AcDc function + BOOLEAN AsfNfcEnable; ///< FCH Cs NFC function + UINT8 AsfNfcInterruptPin; ///< NFC Interrupt pin define + UINT8 AsfNfcRegPuPin; ///< NFC RegPu pin define + UINT8 AsfNfcWakePin; ///< NFC Wake Pin define + UINT8 PowerButtonGpe; ///< GPE# used by Power Button device + UINT8 AcDcTimerGpe; ///< GPE# used by Timer device +} FCH_CS; + + +/// +/// MISC structure +/// +typedef struct { + BOOLEAN NativePcieSupport; /// PCIe NativePcieSupport - Debug function. 1:Enabled, 0:Disabled + BOOLEAN S3Resume; /// S3Resume - Flag of ACPI S3 Resume. + BOOLEAN RebootRequired; /// RebootRequired - Flag of Reboot system is required. + UINT8 FchVariant; /// FchVariant - FCH Variant value. + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + TIMER_SMI LongTimer; ///< Long Timer SMI + TIMER_SMI ShortTimer; ///< Short Timer SMI + UINT32 FchCpuId; ///< Saving CpuId for FCH Module. + BOOLEAN NoneSioKbcSupport; ///< NoneSioKbcSupport - No KBC/SIO controller ( Turn on Inchip KBC emulation function ) + FCH_CS FchCsSupport; ///< FCH Cs function structure +} FCH_MISC; + + +/// +/// SMBus structure +/// +typedef struct { + UINT32 SmbusSsid; ///< SMBUS controller Subsystem ID +} FCH_SMBUS; + + +/// +/// Acpi structure +/// +typedef struct { + UINT16 Smbus0BaseAddress; ///< Smbus0BaseAddress + /// @par + /// Smbus BASE Address + /// + UINT16 Smbus1BaseAddress; ///< Smbus1BaseAddress + /// @par + /// Smbus1 (ASF) BASE Address + /// + UINT16 SioPmeBaseAddress; ///< SioPmeBaseAddress + /// @par + /// SIO PME BASE Address + /// + UINT32 WatchDogTimerBase; ///< WatchDogTimerBase + /// @par + /// Watch Dog Timer Address + /// + UINT16 AcpiPm1EvtBlkAddr; ///< AcpiPm1EvtBlkAddr + /// @par + /// ACPI PM1 event block Address + /// + UINT16 AcpiPm1CntBlkAddr; ///< AcpiPm1CntBlkAddr + /// @par + /// ACPI PM1 Control block Address + /// + UINT16 AcpiPmTmrBlkAddr; ///< AcpiPmTmrBlkAddr + /// @par + /// ACPI PM timer block Address + /// + UINT16 CpuControlBlkAddr; ///< CpuControlBlkAddr + /// @par + /// ACPI CPU control block Address + /// + UINT16 AcpiGpe0BlkAddr; ///< AcpiGpe0BlkAddr + /// @par + /// ACPI GPE0 block Address + /// + UINT16 SmiCmdPortAddr; ///< SmiCmdPortAddr + /// @par + /// SMI command port Address + /// + UINT16 AcpiPmaCntBlkAddr; ///< AcpiPmaCntBlkAddr + /// @par + /// ACPI PMA Control block Address + /// + BOOLEAN AnyHt200MhzLink; ///< AnyHt200MhzLink + /// @par + /// HT Link Speed on 200MHz option for each CPU specific LDTSTP# (Force enable) + /// + BOOLEAN SpreadSpectrum; ///< SpreadSpectrum + /// @par + /// Spread Spectrum function + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + POWER_FAIL PwrFailShadow; ///< PwrFailShadow = PM_Reg: 5Bh [3:0] + /// @par + /// @li <b>00</b> - Always off + /// @li <b>01</b> - Always on + /// @li <b>11</b> - Use previous + /// + UINT8 StressResetMode; ///< StressResetMode 01-10 + /// @li <b>00</b> - Disabed + /// @li <b>01</b> - Io Write 0x64 with 0xfe + /// @li <b>10</b> - Io Write 0xcf9 with 0x06 + /// @li <b>11</b> - Io Write 0xcf9 with 0x0e + /// + BOOLEAN MtC1eEnable; /// MtC1eEnable - Enable MtC1e + VOID* OemProgrammingTablePtr; /// Pointer of ACPI OEM table + UINT8 SpreadSpectrumOptions; /// SpreadSpectrumOptions - Spread Spectrum Option +} FCH_ACPI; + + +/// +/// HWM temp parameter structure +/// +typedef struct _FCH_HWM_TEMP_PAR { + UINT16 At; ///< At + UINT16 Ct; ///< Ct + UINT8 Mode; ///< Mode BIT0:HiRatio BIT1:HiCurrent +} FCH_HWM_TEMP_PAR; + +/// +/// HWM Current structure +/// +typedef struct _FCH_HWM_CUR { + UINT16 FanSpeed[5]; ///< FanSpeed - fan Speed + UINT16 Temperature[5]; ///< Temperature - temperature + UINT16 Voltage[8]; ///< Voltage - voltage +} FCH_HWM_CUR; + +/// +/// HWM fan control structure +/// +typedef struct _FCH_HWM_FAN_CTR { + UINT8 InputControlReg00; /// Fan Input Control register, PM2 offset [0:4]0 + UINT8 ControlReg01; /// Fan control register, PM2 offset [0:4]1 + UINT8 FreqReg02; /// Fan frequency register, PM2 offset [0:4]2 + UINT8 LowDutyReg03; /// Low Duty register, PM2 offset [0:4]3 + UINT8 MedDutyReg04; /// Med Duty register, PM2 offset [0:4]4 + UINT8 MultiplierReg05; /// Multiplier register, PM2 offset [0:4]5 + UINT16 LowTempReg06; /// Low Temp register, PM2 offset [0:4]6 + UINT16 MedTempReg08; /// Med Temp register, PM2 offset [0:4]8 + UINT16 HighTempReg0A; /// High Temp register, PM2 offset [0:4]A + UINT8 LinearRangeReg0C; /// Linear Range register, PM2 offset [0:4]C + UINT8 LinearHoldCountReg0D; /// Linear Hold Count register, PM2 offset [0:4]D +} FCH_HWM_FAN_CTR; + +/// +/// Hwm structure +/// +typedef struct _FCH_HWM { + UINT8 HwMonitorEnable; ///< HwMonitorEnable + UINT32 HwmControl; ///< hwmControl + /// @par + /// HWM control configuration + /// @li <b>0</b> - HWM is Enabled + /// @li <b>1</b> - IMC is Enabled + /// + UINT8 FanSampleFreqDiv; ///< Sampling rate of Fan Speed + /// @li <b>00</b> - Base(22.5KHz) + /// @li <b>01</b> - Base(22.5KHz)/2 + /// @li <b>10</b> - Base(22.5KHz)/4 + /// @li <b>11</b> - Base(22.5KHz)/8 + /// + UINT8 HwmFchtsiAutoPoll; ///< TSI Auto Polling + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT8 HwmFchtsiAutoPollStarted; ///< HwmSbtsiAutoPollStarted + UINT8 FanLinearEnhanceEn; ///< FanLinearEnhanceEn + UINT8 FanLinearHoldFix; ///< FanLinearHoldFix + UINT8 FanLinearRangeOutLimit; ///< FanLinearRangeOutLimit + UINT16 HwmCalibrationFactor; /// Calibration Factor + FCH_HWM_CUR HwmCurrent; /// HWM Current structure + FCH_HWM_CUR HwmCurrentRaw; /// HWM Current Raw structure + FCH_HWM_TEMP_PAR HwmTempPar[5]; /// HWM Temp parameter structure + FCH_HWM_FAN_CTR HwmFanControl[5]; /// HWM Fan Control structure + FCH_HWM_FAN_CTR HwmFanControlCooked[5]; /// HWM Fan Control structure +} FCH_HWM; + + +/// +/// Gec structure +/// +typedef struct { + BOOLEAN GecEnable; ///< GecEnable - GEC function switch + UINT8 GecPhyStatus; /// GEC PHY Status + UINT8 GecPowerPolicy; /// GEC Power Policy + /// @li <b>00</b> - GEC is powered down in S3 and S5 + /// @li <b>01</b> - GEC is powered down only in S5 + /// @li <b>10</b> - GEC is powered down only in S3 + /// @li <b>11</b> - GEC is never powered down + /// + UINT8 GecDebugBus; /// GEC Debug Bus + /// @li <b>0</b> - disable + /// @li <b>1</b> - enable + /// + UINT32 GecShadowRomBase; ///< GecShadowRomBase + /// @par + /// GEC (NIC) SHADOWROM BASE Address + /// + VOID *PtrDynamicGecRomAddress; /// Pointer of Dynamic GEC ROM Address +} FCH_GEC; + + +/// +/// _ABTblEntry - AB link register table R/W structure +/// +typedef struct _AB_TBL_ENTRY { + UINT8 RegType; /// RegType : AB Register Type (ABCFG, AXCFG and so on) + UINT32 RegIndex; /// RegIndex : AB Register Index + UINT32 RegMask; /// RegMask : AB Register Mask + UINT32 RegData; /// RegData : AB Register Data +} AB_TBL_ENTRY; + +/// +/// AB structure +/// +typedef struct { + BOOLEAN AbMsiEnable; ///< ABlink MSI capability + UINT8 ALinkClkGateOff; /// Alink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 BLinkClkGateOff; /// Blink Clock Gate-Off function - 0:disable, 1:enable *KR + UINT8 AbClockGating; /// AB Clock Gating - 0:disable, 1:enable *KR + UINT8 GppClockGating; /// GPP Clock Gating - 0:disable, 1:enable + UINT8 UmiL1TimerOverride; /// UMI L1 inactivity timer overwrite value + UINT8 UmiLinkWidth; /// UMI Link Width + UINT8 UmiDynamicSpeedChange; /// UMI Dynamic Speed Change - 0:disable, 1:enable + UINT8 PcieRefClockOverClocking; /// PCIe Ref Clock OverClocking value + UINT8 UmiGppTxDriverStrength; /// UMI GPP TX Driver Strength + BOOLEAN NbSbGen2; /// UMI link Gen2 - 0:Gen1, 1:Gen2 + UINT8 PcieOrderRule; /// PCIe Order Rule - 0:disable, 1:enable *KR AB Posted Pass Non-Posted + UINT8 SlowSpeedAbLinkClock; /// Slow Speed AB Link Clock - 0:disable, 1:enable *KR + BOOLEAN ResetCpuOnSyncFlood; /// Reset Cpu On Sync Flood - 0:disable, 1:enable *KR + BOOLEAN AbDmaMemoryWrtie3264B; /// AB DMA Memory Write 32/64 BYTE Support *KR only + BOOLEAN AbMemoryPowerSaving; /// AB Memory Power Saving *KR only + BOOLEAN SbgDmaMemoryWrtie3264ByteCount; /// SBG DMA Memory Write 32/64 BYTE Count Support *KR only + BOOLEAN SbgMemoryPowerSaving; /// SBG Memory Power Saving *KR only +} FCH_AB; + + +/** + * PCIE_CAP_ID - PCIe Cap ID + * + */ +#define PCIE_CAP_ID 0x10 + +/// +/// FCH_GPP_PORT_CONFIG - Fch GPP port config structure +/// +typedef struct { + BOOLEAN PortPresent; ///< Port connection + /// @par + /// @li <b>0</b> - Port doesn't have slot. No need to train the link + /// @li <b>1</b> - Port connection defined and needs to be trained + /// + BOOLEAN PortDetected; ///< Link training status + /// @par + /// @li <b>0</b> - EP not detected + /// @li <b>1</b> - EP detected + /// + BOOLEAN PortIsGen2; ///< Port link speed configuration + /// @par + /// @li <b>00</b> - Auto + /// @li <b>01</b> - Forced GEN1 + /// @li <b>10</b> - Forced GEN2 + /// @li <b>11</b> - Reserved + /// + BOOLEAN PortHotPlug; ///< Support hot plug? + /// @par + /// @li <b>0</b> - No support + /// @li <b>1</b> - support + /// + UINT8 PortMisc; /// PortMisc - Reserved +} FCH_GPP_PORT_CONFIG; + +/// +/// GPP structure +/// +typedef struct { + FCH_GPP_PORT_CONFIG PortCfg[4]; /// GPP port configuration structure + GPP_LINKMODE GppLinkConfig; ///< GppLinkConfig - PCIE_GPP_Enable[3:0] + /// @li <b>0000</b> - Port ABCD -> 4:0:0:0 + /// @li <b>0010</b> - Port ABCD -> 2:2:0:0 + /// @li <b>0011</b> - Port ABCD -> 2:1:1:0 + /// @li <b>0100</b> - Port ABCD -> 1:1:1:1 + /// + BOOLEAN GppFunctionEnable; ///< GPP Function - 0:disable, 1:enable + BOOLEAN GppToggleReset; ///< Toggle GPP core reset + UINT8 GppHotPlugGeventNum; ///< Hotplug GEVENT # - valid value 0-31 + UINT8 GppFoundGfxDev; ///< Gpp Found Gfx Device + /// @li <b>0</b> - Not found + /// @li <b>1</b> - Found + /// + BOOLEAN GppGen2; ///< GPP Gen2 - 0:disable, 1:enable + UINT8 GppGen2Strap; ///< GPP Gen2 Strap - 0:disable, 1:enable, FCH itself uses this + BOOLEAN GppMemWrImprove; ///< GPP Memory Write Improve - 0:disable, 1:enable + BOOLEAN GppUnhidePorts; ///< GPP Unhide Ports - 0:disable, 1:enable + UINT8 GppPortAspm; ///< GppPortAspm - ASPM state for all GPP ports + /// @li <b>01</b> - Disabled + /// @li <b>01</b> - L0s + /// @li <b>10</b> - L1 + /// @li <b>11</b> - L0s + L1 + /// + BOOLEAN GppLaneReversal; ///< GPP Lane Reversal - 0:disable, 1:enable + BOOLEAN GppPhyPllPowerDown; ///< GPP PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN GppDynamicPowerSaving; ///< GPP Dynamic Power Saving - 0:disable, 1:enable + BOOLEAN PcieAer; ///< PcieAer - Advanced Error Report: 0/1-disable/enable + BOOLEAN PcieRas; ///< PCIe RAS - 0:disable, 1:enable + BOOLEAN PcieCompliance; ///< PCIe Compliance - 0:disable, 1:enable + BOOLEAN PcieSoftwareDownGrade; ///< PCIe Software Down Grade + BOOLEAN UmiPhyPllPowerDown; ///< UMI PHY PLL Power Down - 0:disable, 1:enable + BOOLEAN SerialDebugBusEnable; ///< Serial Debug Bus Enable + UINT8 GppHardwareDownGrade; ///< GppHardwareDownGrade - Gpp HW Down Grade function 0:Disable, 1-4: portA-D + UINT8 GppL1ImmediateAck; ///< GppL1ImmediateAck - Gpp L1 Immediate ACK 0: enable, 1: disable + BOOLEAN NewGppAlgorithm; ///< NewGppAlgorithm - New GPP procedure + UINT8 HotPlugPortsStatus; ///< HotPlugPortsStatus - Save Hot-Plug Ports Status + UINT8 FailPortsStatus; ///< FailPortsStatus - Save Failure Ports Status + UINT8 GppPortMinPollingTime; ///< GppPortMinPollingTime - Min. Polling time for Gpp Port Training + BOOLEAN IsCapsuleMode; ///< IsCapsuleMode - Support Capsule Mode in FCH +} FCH_GPP; + +/// FCH USB Over Current Data Block +typedef struct { + UINT8 Usb1OcPinMap[5]; ///< USB1 over current pin mapping + UINT8 Usb2OcPinMap[5]; ///< USB2 over current pin mapping + UINT8 Usb3OcPinMap[4]; ///< USB3 over current pin mapping + UINT8 Usb4OcPinMap[2]; ///< USB4 over current pin mapping + UINT8 Xhci0OcPinMap[2]; ///< XHCI0 over current pin mapping + UINT8 Xhci1OcPinMap[2]; ///< XHCI1 over current pin mapping +} FCH_USB_OC; + + +/// +/// FCH USB sturcture +/// +typedef struct { + BOOLEAN Ohci1Enable; ///< OHCI1 controller enable + BOOLEAN Ohci2Enable; ///< OHCI2 controller enable + BOOLEAN Ohci3Enable; ///< OHCI3 controller enable + BOOLEAN Ohci4Enable; ///< OHCI4 controller enable + BOOLEAN Ehci1Enable; ///< EHCI1 controller enable + BOOLEAN Ehci2Enable; ///< EHCI2 controller enable + BOOLEAN Ehci3Enable; ///< EHCI3 controller enable + BOOLEAN Xhci0Enable; ///< XHCI0 controller enable + BOOLEAN Xhci1Enable; ///< XHCI1 controller enable + BOOLEAN UsbMsiEnable; ///< USB MSI capability + UINT32 OhciSsid; ///< OHCI SSID + UINT32 Ohci4Ssid; ///< OHCI 4 SSID + UINT32 EhciSsid; ///< EHCI SSID + UINT32 XhciSsid; ///< XHCI SSID + BOOLEAN UsbPhyPowerDown; ///< USB PHY Power Down - 0:disable, 1:enable + UINT32 UserDefineXhciRomAddr; ///< XHCI ROM address define by platform BIOS + UINT8 Ehci1Phy[5]; ///< EHCI1 USB PHY Driving Strength value table + UINT8 Ehci2Phy[5]; ///< EHCI2 USB PHY Driving Strength value table + UINT8 Ehci3Phy[4]; ///< EHCI3 USB PHY Driving Strength value table + UINT8 Xhci20Phy[4]; ///< XHCI USB 2.0 PHY Driving Strength value table + UINT8 Ehci1DebugPortSel; ///< DebugPortSel for Ehci1 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci2DebugPortSel; ///< DebugPortSel for Ehci2 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + UINT8 Ehci3DebugPortSel; ///< DebugPortSel for Ehci3 Hub + /// @li <b>000</b> - Disable + /// @li <b>001</b> - HubDownStreamPort0 + /// @li <b>010</b> - HubDownStreamPort1 + /// @li <b>011</b> - HubDownStreamPort2 + /// @li <b>100</b> - HubDownStreamPort3 + FCH_USB_OC FchUsbOcMap; ///< Fch USB OC Map +} FCH_USB; + + +/// Private: FCH_DATA_BLOCK_RESET +typedef struct _FCH_RESET_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + FCH_RESET_INTERFACE FchReset; ///< Reset interface + + UINT8 FastSpeed; ///< SPI FastSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 WriteSpeed; ///< SPI Write Speed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz + UINT8 Mode; ///< SPI Mode + /// @li <b>101</b> - Qual-io 1-4-4 + /// @li <b>100</b> - Dual-io 1-2-2 + /// @li <b>011</b> - Qual-io 1-1-4 + /// @li <b>010</b> - Dual-io 1-1-2 + /// @li <b>111</b> - FastRead + /// @li <b>110</b> - Normal + /// + UINT8 AutoMode; ///< SPI Auto Mode - 0:disable, 1:enable + UINT8 BurstWrite; ///< SPI Burst Write - 0:disable, 1:enable + BOOLEAN Sata6AhciCap; ///< SATA 6 AHCI Capability - TRUE:enable, FALSE:disable + UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable + BOOLEAN EcKbd; ///< EC KBD - 0:disable, 1:enable + BOOLEAN LegacyFree; ///< Legacy Free - 0:disable, 1:enable + BOOLEAN SataSetMaxGen2; ///< SATA enable maximum GEN2 + UINT8 SataClkMode; ///< SATA reference clock selector and divider + UINT8 SataModeReg; ///< Output: SATAConfig PMIO:0xDA + BOOLEAN SataInternal100Spread; ///< SATA internal 100MHz spread ON/OFF + UINT8 SpiSpeed; ///< SPI NormSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz +// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38 +// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C +// UINT8 SpiProtectEn0_1d_34; /// + UINT8 SPI100_Enable; /// + BOOLEAN EcChannel0; ///< Enable EC channel 0 + FCH_GPP Gpp; ///< GPP subsystem + FCH_SPI Spi; ///< SPI subsystem + BOOLEAN QeEnabled; /// Quad Mode Enabled + BOOLEAN FchOscout1ClkContinous; ///< FCH OSCOUT1_CLK Continous + VOID* EarlyOemGpioTable; /// Pointer of Early OEM GPIO table +// VOID* OemSpiDeviceTable; /// Pointer of OEM Spi Device table + VOID* OemResetProgrammingTablePtr; /// Pointer of ACPI OEM table +} FCH_RESET_DATA_BLOCK; + + +/// Private: FCH_DATA_BLOCK +typedef struct _FCH_DATA_BLOCK { + AMD_CONFIG_PARAMS *StdHeader; ///< Header structure + + FCH_ACPI HwAcpi; ///< ACPI structure + FCH_AB Ab; ///< AB structure + FCH_GPP Gpp; ///< GPP structure + FCH_USB Usb; ///< USB structure + FCH_SATA Sata; ///< SATA structure + FCH_SMBUS Smbus; ///< SMBus structure + FCH_IDE Ide; ///< IDE structure + FCH_AZALIA Azalia; ///< Azalia structure + FCH_SPI Spi; ///< SPI structure + FCH_PCIB Pcib; ///< PCIB structure + FCH_GEC Gec; ///< GEC structure + FCH_SD Sd; ///< SD structure + FCH_HWM Hwm; ///< Hardware Moniter structure + FCH_IR Ir; ///< IR structure + FCH_HPET Hpet; ///< HPET structure + FCH_GCPU Gcpu; ///< GCPU structure + FCH_IMC Imc; ///< IMC structure + FCH_MISC Misc; ///< MISC structure + VOID* PostOemGpioTable; /// Pointer of Post OEM GPIO table +} FCH_DATA_BLOCK; + +#pragma pack (pop) + +#endif diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchDef.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchDef.h new file mode 100644 index 0000000000..13906c5be8 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Common/FchDef.h @@ -0,0 +1,400 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH routine definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FCH_DEF_H_ +#define _FCH_DEF_H_ + + +UINT32 ReadAlink (IN UINT32 Index, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteAlink (IN UINT32 Index, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwAlink (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID WriteMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr); +VOID RwMem (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data); +VOID ReadPci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPci (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramPciByteTable (IN REG8_MASK* pPciByteTable, IN UINT16 dwTableSize, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchAcpiMmioTbl (IN ACPI_REG_WRITE *pAcpiTbl, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ProgramFchSciMapTbl (IN SCI_MAP_CONTROL *pSciMapTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID ProgramFchGpioTbl (IN GPIO_CONTROL *pGpioTbl); +VOID ProgramFchSataPhyTbl (IN SATA_PHY_CONTROL *pSataPhyTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock); +VOID GetChipSysMode (IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsImcEnabled (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WritePmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiMmioBase (OUT UINT32 *AcpiMmioBase, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetFchAcpiPmBase (OUT UINT16 *AcpiPmBase, IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchSleepType (IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 ReadFchChipsetRevision (IN AMD_CONFIG_PARAMS *StdHeader); +UINT8 GetFchRevision (IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN CheckAvalonRevisionA0 (IN AMD_CONFIG_PARAMS *StdHeader); + +/// +/// Fch Ab Routines +/// +/// Pei Phase +/// +VOID FchInitResetAb (IN VOID* FchDataPtr); +VOID FchProgramAbPowerOnReset (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAb (IN VOID* FchDataPtr); +VOID FchInitEnvAbSpecial (IN VOID* FchDataPtr); +VOID FchInitMidAb (IN VOID* FchDataPtr); +VOID FchInitLateAb (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchInitEnvAbLinkInit (IN VOID* FchDataPtr); +BOOLEAN IsUmiOneLaneGen1Mode (IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchAbLateProgram (IN VOID* FchDataPtr); +VOID ProgramPcieNativeMode (IN VOID* FchDataPtr); + +/// +/// Fch Azalia Routines +/// +/// Pei Phase +/// +VOID FchInitResetAzalia (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvAzalia (IN VOID *FchDataPtr); +VOID FchInitMidAzalia (IN VOID *FchDataPtr); +VOID FchInitLateAzalia (IN VOID *FchDataPtr); + +/// +/// Fch HwAcpi Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitResetHwAcpi (IN VOID *FchDataPtr); +VOID ProgramFchHwAcpiResetP (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwAcpiP (IN VOID *FchDataPtr); +VOID FchInitEnvHwAcpi (IN VOID *FchDataPtr); +VOID ProgramEnvPFchAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvHwAcpiPciReg (IN VOID *FchDataPtr); +VOID ProgramSpecificFchInitEnvAcpiMmio (IN VOID *FchDataPtr); +VOID ProgramFchEnvSpreadSpectrum (IN VOID *FchDataPtr); +VOID FchInitMidHwAcpi (IN VOID *FchDataPtr); +VOID FchInitLateHwAcpi (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// +VOID HpetInit (IN VOID *FchDataPtr); +VOID C3PopupSetting (IN VOID *FchDataPtr); +VOID MtC1eEnable (IN VOID *FchDataPtr); +VOID GcpuRelatedSetting (IN VOID *FchDataPtr); +VOID StressResetModeLate (IN VOID *FchDataPtr); + +/// +/// Fch Hwm Routines +/// +/// Pei Phase +/// +VOID FchInitResetHwm (IN VOID* FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvHwm (IN VOID* FchDataPtr); +VOID FchInitMidHwm (IN VOID* FchDataPtr); +VOID FchInitLateHwm (IN VOID* FchDataPtr); +/// +/// Other Public Routines +/// +VOID HwmInitRegister (IN VOID* FchDataPtr); +VOID HwmProcessParameter (IN VOID* FchDataPtr); +VOID HwmSetRegister (IN VOID* FchDataPtr); +VOID HwmGetCalibrationFactor (IN VOID* FchDataPtr); +VOID HwmFchtsiAutoPolling (IN VOID* FchDataPtr); +VOID HwmGetRawData (IN VOID* FchDataPtr); +VOID HwmCaculate (IN VOID* FchDataPtr); +VOID HwmFchtsiAutoPollingOff (IN VOID* FchDataPtr); +VOID FchECfancontrolservice (IN VOID* FchDataPtr); + +/// +/// Fch Imc Routines +/// +/// Pei Phase +/// +VOID FchInitResetImc (IN VOID *FchDataPtr); +VOID FchInitResetEc (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvImc (IN VOID *FchDataPtr); +VOID FchInitMidImc (IN VOID *FchDataPtr); +VOID FchInitLateImc (IN VOID *FchDataPtr); +VOID FchInitEnvEc (IN VOID *FchDataPtr); +VOID FchInitMidEc (IN VOID *FchDataPtr); +VOID FchInitLateEc (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID EnterEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ExitEcConfig (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwEc8 (IN UINT8 Address, IN UINT8 AndMask, IN UINT8 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID WaitForEcLDN9MailboxCmdAck (IN AMD_CONFIG_PARAMS *StdHeader); + +VOID ImcSleep (IN VOID *FchDataPtr); +VOID ImcEnableSurebootTimer (IN VOID *FchDataPtr); +VOID ImcDisarmSurebootTimer (IN VOID *FchDataPtr); +VOID ImcDisableSurebootTimer (IN VOID *FchDataPtr); +VOID ImcWakeup (IN VOID *FchDataPtr); +VOID ImcIdle (IN VOID *FchDataPtr); +BOOLEAN ValidateImcFirmware (IN VOID *FchDataPtr); +VOID SoftwareToggleImcStrapping (IN VOID *FchDataPtr); +VOID ImcCrashReset (IN VOID *FchDataPtr); +VOID SoftwareDisableImc (IN VOID *FchDataPtr); + + +/// +/// Fch Ir Routines +/// +/// Dxe Phase +/// +VOID FchInitEnvIr (IN VOID* FchDataPtr); +VOID FchInitMidIr (IN VOID* FchDataPtr); +VOID FchInitLateIr (IN VOID* FchDataPtr); + +/// +/// Fch SATA Routines +/// +/// Pei Phase +/// +VOID FchInitResetSata (IN VOID *FchDataPtr); +VOID FchInitResetSataProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitMidSata (IN VOID *FchDataPtr); +VOID FchInitEnvSata (IN VOID *FchDataPtr); +VOID FchInitEnvProgramSataPciRegs (IN VOID *FchDataPtr); +VOID FchInitMidProgramSataRegs (IN VOID *FchDataPtr); +VOID FchInitLateProgramSataRegs (IN VOID *FchDataPtr); + +VOID FchInitLateSata (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde (IN VOID *FchDataPtr); +VOID FchInitMidSataIde (IN VOID *FchDataPtr); +VOID FchInitLateSataIde (IN VOID *FchDataPtr); +VOID FchInitEnvSataAhci (IN VOID *FchDataPtr); +VOID FchInitMidSataAhci (IN VOID *FchDataPtr); +VOID FchInitLateSataAhci (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaid (IN VOID *FchDataPtr); +VOID FchInitMidSataRaid (IN VOID *FchDataPtr); +VOID FchInitLateSataRaid (IN VOID *FchDataPtr); +VOID FchInitEnvSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitMidSataIde2Ahci (IN VOID *FchDataPtr); +VOID FchInitLateSataIde2Ahci (IN VOID *FchDataPtr); + +VOID SataAhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataRaidSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataIde2AhciSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID SataSetIrqIntResource (IN VOID *FchDataPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataBar5setting (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID SataEnableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataDisableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader); +VOID SataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID FchSataSetDeviceNumMsi (IN VOID *FchDataPtr); +VOID ShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID FchShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5); +VOID SataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID FchSataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr); +VOID FchSataGpioInitial (IN VOID *FchDataPtr); +VOID SataBar5RegSet (IN VOID *FchDataPtr); +VOID SataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchSataSetPortGenMode (IN VOID *FchDataPtr); +VOID FchProgramSataPhy (IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchSataDriveFpga (IN VOID *FchDataPtr); +VOID FchInitEnvSataRaidProgram (IN VOID *FchDataPtr); + +/// +/// FCH USB Controller Public Function +/// +/// Pei Phase +/// +VOID FchInitResetUsb (IN VOID *FchDataPtr); +VOID FchInitResetEhci (IN VOID *FchDataPtr); +VOID FchInitResetXhci (IN VOID *FchDataPtr); +VOID FchInitResetXhciProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvUsb (IN VOID *FchDataPtr); +VOID FchInitMidUsb (IN VOID *FchDataPtr); +VOID FchInitLateUsb (IN VOID *FchDataPtr); +VOID FchInitEnvUsbEhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbEhci (IN VOID *FchDataPtr); +VOID FchEhciDebugPortService (IN VOID *FchDataPtr); +VOID FchInitEnvUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbXhci (IN VOID *FchDataPtr); +VOID FchInitLateUsbXhci (IN VOID *FchDataPtr); +VOID FchInitMidUsbEhci1 (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitMidUsbEhci2 (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitMidUsbEhci3 (IN FCH_DATA_BLOCK *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSetUsbEnableReg (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchEhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciInitIndirectReg (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchInitLateUsbXhciProgram (IN VOID *FchDataPtr); +VOID FchXhciPowerSavingProgram (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchXhciUsbPhyCalibrated (IN FCH_DATA_BLOCK* FchDataPtr); +UINT8 FchUsbCommonPhyCalibration (IN FCH_DATA_BLOCK* FchDataPtr); +VOID FchUsbOverCurrentControl (IN VOID *FchDataPtr); + +/// +/// Fch Sd Routines +/// +VOID FchInitEnvSd (IN VOID *FchDataPtr); +VOID FchInitMidSd (IN VOID *FchDataPtr); +VOID FchInitLateSd (IN VOID *FchDataPtr); + +/// +/// Other Public Routines +/// + +VOID FchInitEnvSdProgram (IN VOID *FchDataPtr); + +/// +/// Fch Spi Routines +/// +/// Pei Phase +/// +VOID FchInitResetSpi (IN VOID *FchDataPtr); +VOID FchInitResetLpc (IN VOID *FchDataPtr); +VOID FchInitResetLpcProgram (IN VOID *FchDataPtr); +/// +/// Dxe Phase +/// +VOID FchInitEnvSpi (IN VOID *FchDataPtr); +VOID FchInitMidSpi (IN VOID *FchDataPtr); +VOID FchInitLateSpi (IN VOID *FchDataPtr); +VOID FchInitEnvLpc (IN VOID *FchDataPtr); +VOID FchInitMidLpc (IN VOID *FchDataPtr); +VOID FchInitLateLpc (IN VOID *FchDataPtr); +VOID FchInitEnvLpcProgram (IN VOID *FchDataPtr); +/// +/// Other Public Routines +/// +VOID FchSpiUnlock (IN VOID *FchDataPtr); +VOID FchSpiLock (IN VOID *FchDataPtr); + +/*--------------------------- Documentation Pages ---------------------------*/ +VOID FchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID CimFchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader); +VOID FchPciReset (IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort80 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID OutPort1080 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader); +VOID GetEfuseStatus (IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID TurnOffCG2 (OUT VOID); +VOID BackUpCG2 (OUT VOID); +VOID FchCopyMem (IN VOID* pDest, IN VOID* pSource, IN UINTN Length); +VOID* GetRomSigPtr (IN UINTN* RomSigPtr, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhciIndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci0IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID RwXhci1IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci0Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID ReadXhci1Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader); +VOID AcLossControl (IN UINT8 AcLossControlValue); +VOID FchVgaInit (OUT VOID); +VOID RecordFchConfigPtr (IN UINT32 FchConfigPtr); +VOID ValidateFchVariant (IN VOID *FchDataPtr); +VOID RecordSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +VOID ClearAllSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader); +BOOLEAN IsGCPU (IN VOID *FchDataPtr); +BOOLEAN IsExternalClockMode (IN VOID *FchDataPtr); +VOID SbSleepTrapControl (IN BOOLEAN SleepTrap); + +AGESA_STATUS +FchSpiTransfer ( + IN UINT8 PrefixCode, + IN UINT8 Opcode, + IN OUT UINT8 *DataPtr, + IN UINT8 *AddressPtr, + IN UINT8 Length, + IN BOOLEAN WriteFlag, + IN BOOLEAN AddressFlag, + IN BOOLEAN DataFlag, + IN BOOLEAN FinishedFlag + ); + +BOOLEAN +FchConfigureSpiDeviceDummyCycle ( + IN UINT32 DeviceID, + IN UINT8 SpiMode + ); + +UINT32 +FchReadSpiId ( + IN BOOLEAN Flag + ); + + +BOOLEAN +FchPlatformSpiQe ( + IN VOID *FchDataPtr + ); + +#endif + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/Fch.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Fch.h new file mode 100644 index 0000000000..ab6f3c0d2e --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/Fch.h @@ -0,0 +1,2318 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH registers definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#define FCH_REVISION "0.0.5.0" +#define FCH_ID "FCH_A05" +#define FCH_VERSION 0x0000 + +/** + * @page fchinitguide FCH implement phase in AGESA + * + * FCH provides below access to supported FCH service functions + * and data. + * - @subpage fchreset "FCH_INIT_RESET" + * - @subpage fchenv "FCH_INIT_ENV" + * - @subpage fchmid "FCH_INIT_MID" + * - @subpage fchlate "FCH_INIT_LATE" + * - @subpage fchs3early "FCH_INIT_S3_EARLY_RESTORE" + * - @subpage fchs3late "FCH_INIT_S3_LATE_RESTORE" + * - @subpage fchsmm "FCH_SMM_SERVICE" + * - @subpage fchsmmacpion "FCH_SMM_ACPION" + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchreset FCH_INIT_RESET + * @section FCH_INIT_RESET Interface Call + * @par + * Initialize structure referenced by FCH_RESET_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_RESET_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitReset (IN AMD_RESET_PARAMS *ResetParams); + * @subsection FCH_INIT_RESET_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_RESET_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgWatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgGecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgCpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchenv FCH_INIT_ENV + * @section FCH_INIT_ENV Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_ENV_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitEnv (IN AMD_ENV_PARAMS *EnvParams); + * @subsection FCH_INIT_ENV_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_ENV_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchmid FCH_INIT_MID + * @section FCH_INIT_MID Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_MID_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitMid (IN AMD_MID_PARAMS *MidParams); + * @subsection FCH_INIT_MID_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_MID_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchlate FCH_INIT_LATE + * @section FCH_INIT_LATE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_LATE_CallIn Call Prototype + * @par + * AGESA_STATUS FchInitLate (IN AMD_S3SAVE_PARAMS *LateParams); + * @subsection FCH_INIT_LATE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_LATE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3early FCH_INIT_S3_EARLY_RESTORE + * @section FCH_INIT_S3_EARLY_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_EARLY_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_EARLY_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchs3late FCH_INIT_S3_LATE_RESTORE + * @section FCH_INIT_S3_LATE_RESTORE Interface Call + * @par + * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value. + * @subsection FCH_INIT_S3_LATE_RESTORE_CallIn Call Prototype + * @par + * VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); + * @subsection FCH_INIT_S3_LATE_RESTORE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_INIT_S3_LATE_RESTORE_Config Prepare for Configuration Data. + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR> + * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> + * </TABLE> + * + */ + +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmm FCH_SMM_SERVICE + * @section FCH_SMM_SERVICE Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_SERVICE_CallIn Call Prototype + * @par + * FchSmmService ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_SERVICE_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_SERVICE --> 0x00010060 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_SERVICE_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_SERVICE_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_SERVICE 0x00010060ul +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page fchsmmacpion FCH_SMM_ACPION + * @section FCH_SMM_ACPION Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection FCH_SMM_ACPION_CallIn Call Prototype + * @par + * FchSmmAcpiOn ((FCHCFG*)pConfig) (Followed PH Interface) + * @subsection FCH_SMM_ACPION_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> FCH_SMM_ACPION --> 0x00010061 </TD></TR> + * </TABLE> + * @subsection FCH_SMM_ACPION_CallOut Prepare for Callout + * @par + * Not Applicable (Not necessary for the current implementation) + * @subsection FCH_SMM_ACPION_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define FCH_SMM_ACPION 0x00010061ul + +#ifndef OEM_CALLBACK_BASE + #define OEM_CALLBACK_BASE 0x00010100ul +#endif + +//0x00 - 0x0F callback functions are reserved for bootblock +#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10 +#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT + * @section CB_SBGPP_RESET_ASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30 +/*--------------------------- Documentation Pages ---------------------------*/ +/** + * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT + * @section CB_SBGPP_RESET_DEASSERT Interface Call + * Initialize structure referenced by FCHCFG to default recommended value. + * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID + * @par + * <TABLE border="0"> + * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR> + * </TABLE> + * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data. + * @par + * Not necessary on current implementation + * + */ +#define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31 + +#define CFG_ADDR_PORT 0xCF8 +#define CFG_DATA_PORT 0xCFC + +#define ALINK_ACCESS_INDEX 0x0CD8 +#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4 + +/*------------------------------------------------------------------ +; I/O Base Address - Should be set by host BIOS +;------------------------------------------------------------------ */ +#define DELAY_PORT 0x0E0 + +#define FCH_8259_CONTROL_REG_MASTER 0x20 +#define FCH_8259_MASK_REG_MASTER 0x21 + +/*------------------------------------------------------------------ +; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display +;------------------------------------------------------------------ */ +// ASIC VendorID and DeviceIDs +#define ATI_VID 0x1002 +#define AMD_FCH_VID 0x1022 +#define FCH_DEVICE_ID 0x780B +#define FCH_SATA_VID AMD_FCH_VID // Dev 17 Func 0 +#define FCH_SATA_DID 0x7800 +#define FCH_SATA_AHCI_DID 0x7801 +#define FCH_SATA_RAID_DID 0x7802 +#define FCH_SATA_RAID5_DID 0x7803 +#define FCH_SATA_AMDAHCI_DID 0x7804 +#define FCH_SATA_RAID_DOTHILL_DID 0x7805 +#define FCH_SATA_RAID5_DOTHILL_DID 0x780A +#define FCH_USB_OHCI_VID AMD_FCH_VID // Dev 18 Func 0, Dev 19 Func 0 +#define FCH_USB_OHCI_DID 0x7807 +#define FCH_USB_EHCI_VID AMD_FCH_VID // Dev 18 Func 2, Dev 19 Func 2 +#define FCH_USB_EHCI_DID 0x7808 +#define FCH_USB_XHCI_VID AMD_FCH_VID // Dev 10 Func 0, Dev 10 Func 1 +#define FCH_USB_XHCI_DID 0x7812 +#define FCH_USB_XHCI_DID_BOLTON 0x7814 +#define AVALON_USB_XHCI_DID 0x7814 +#define FCH_SMBUS_VID AMD_FCH_VID // Dev 20 Func 0 +#define FCH_SMBUS_DID 0x780B +#define FCH_IDE_VID AMD_FCH_VID // Dev 20 Func 1 +#define FCH_IDE_DID 0x780C +#define FCH_AZALIA_VID AMD_FCH_VID // Dev 20 Func 2 +#define FCH_AZALIA_DID 0x780D +#define FCH_LPC_VID AMD_FCH_VID // Dev 20 Func 3 +#define FCH_LPC_DID 0x780E +#define FCH_PCIB_VID AMD_FCH_VID // Dev 20 Func 4 +#define FCH_PCIB_DID 0x780F +#define FCH_USB_OHCIF_VID AMD_FCH_VID // dev 20 Func 5 +#define FCH_USB_OHCIF_DID 0x7809 +#define FCH_NIC_VID 0x14E4 // Dev 20 Func 6 +#define FCH_NIC_DID 0x1699 +#define FCH_SD_VID AMD_FCH_VID // Dev 20 Func 7 +#define FCH_SD_DID 0x7806 + +//FCH Variant +#define FCH_Variant_EFUSE_LOCATION 0x1E // EFUSE bit 240-247 + +#define FCH_M2 0x01 +#define FCH_M3 0x03 +#define FCH_M3T 0x07 +#define FCH_D2 0x0F +#define FCH_D3 0x1F +#define FCH_D4 0x3F +#define FCH_BOLTON 0x15 +#define FCH_YANGTZE 0x39 +#define FCH_YANGTZEA1 0x3A +#define FCH_AVALONA0 0x41 +#define FCH_AVALONA1 0x42 +//Misc +#define R_FCH_ACPI_PM1_STATUS 0x00 +#define R_FCH_ACPI_PM1_ENABLE 0x02 +#define R_FCH_ACPI_PM_CONTROL 0x04 +#define R_FCH_ACPI_EVENT_STATUS 0x20 +#define R_FCH_ACPI_EVENT_ENABLE 0x24 +#define R_FCH_PM_ACPI_PMA_CNT_BLK_LO 0x2C + +// ACPI Sleep Type +#define ACPI_SLPTYP_S0 0 +#define ACPI_SLPTYP_S1 1 +#define ACPI_SLPTYP_S3 3 +#define ACPI_SLPTYP_S4 4 +#define ACPI_SLPTYP_S5 5 + +//#define SATA_BUS_DEV_FUN_FPGA 0x228 +#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0) +#define FCH_SATA1_BUS 0 +#define FCH_SATA1_DEV 17 +#define FCH_SATA1_FUNC 0 + +#define FC_BUS_DEV_FUN ((0x11 << 3) + 1) +#define FCH_XHCI_BUS 0 +#define FCH_XHCI_DEV 16 +#define FCH_XHCI_FUNC 0 +#define USB_XHCI_BUS_DEV_FUN ((FCH_XHCI_DEV << 3) + FCH_XHCI_FUNC) +#define FCH_XHCI1_BUS 0 +#define FCH_XHCI1_DEV 16 +#define FCH_XHCI1_FUNC 1 +#define USB_XHCI1_BUS_DEV_FUN ((FCH_XHCI1_DEV << 3) + FCH_XHCI1_FUNC) +#define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4 +#define FCH_OHCI1_BUS 0 +#define FCH_OHCI1_DEV 18 +#define FCH_OHCI1_FUNC 0 +#define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9 +#define FCH_OHCI2_BUS 0 +#define FCH_OHCI2_DEV 19 +#define FCH_OHCI2_FUNC 0 +#define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13 +#define FCH_OHCI3_BUS 0 +#define FCH_OHCI3_DEV 22 +#define FCH_OHCI3_FUNC 0 +#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4 +#define FCH_EHCI1_BUS 0 +#define FCH_EHCI1_DEV 18 +#define FCH_EHCI1_FUNC 2 +#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9 +#define FCH_EHCI2_BUS 0 +#define FCH_EHCI2_DEV 19 +#define FCH_EHCI2_FUNC 2 +#define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13 +#define FCH_EHCI3_BUS 0 +#define FCH_EHCI3_DEV 22 +#define FCH_EHCI3_FUNC 2 +#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0) +#define FCH_ISA_BUS 0 +#define FCH_ISA_DEV 20 +#define FCH_ISA_FUNC 0 +#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1) +#define FCH_IDE_BUS 0 +#define FCH_IDE_DEV 20 +#define FCH_IDE_FUNC 1 +#define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2) +#define FCH_AZALIA_BUS 0 +#define FCH_AZALIA_DEV 20 +#define FCH_AZALIA_FUNC 2 +#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3) +#define FCH_LPC_BUS 0 +#define FCH_LPC_DEV 20 +#define FCH_LPC_FUNC 3 +#define PCIB_BUS_DEV_FUN ((0x14 << 3) + 4) // P2P in SB700 +#define FCH_PCI_BUS 0 +#define FCH_PCI_DEV 20 +#define FCH_PCI_FUNC 4 +#define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1 +#define FCH_OHCI4_BUS 0 +#define FCH_OHCI4_DEV 20 +#define FCH_OHCI4_FUNC 5 +//Gigabyte Ethernet Controller +#define GEC_BUS_DEV_FUN ((0x14 << 3) + 6) +#define FCH_GBEC_BUS 0 +#define FCH_GBEC_DEV 20 +#define FCH_GBEC_FUNC 6 + +#define SD_BUS_DEV_FUN ((0x14 << 3) + 7) // SD Controller +#define SD_PCI_BUS 0 +#define SD_PCI_DEV 20 +#define SD_PCI_FUNC 7 + + +#define FCH_GPP_BUS 0 +#define FCH_GPP_DEV 21 +#define FCH_GPP_FUNC 0 +#define GPP0_BUS_DEV_FUN ((0x15 << 3) + 0) // GPP P2P bridge PORT0 +#define GPP1_BUS_DEV_FUN ((0x15 << 3) + 1) // GPP P2P bridge PORT1 +#define GPP2_BUS_DEV_FUN ((0x15 << 3) + 2) // GPP P2P bridge PORT2 +#define GPP3_BUS_DEV_FUN ((0x15 << 3) + 3) // GPP P2P bridge PORT3 + +#define ACPI_MMIO_BASE 0xFED80000ul +#define FCH_CFG_BASE 0x000 // DWORD +#define GPIO_BASE 0x100 // BYTE +#define SMI_BASE 0x200 // DWORD +#define PMIO_BASE 0x300 // DWORD +#define PMIO2_BASE 0x400 // BYTE +#define BIOS_RAM_BASE 0x500 // BYTE +#define CMOS_RAM_BASE 0x600 // BYTE +#define CMOS_BASE 0x700 // BYTE +#define ASF_BASE 0x900 // DWORD +#define SMBUS_BASE 0xA00 // DWORD +#define WATCHDOG_BASE 0xB00 // +#define HPET_BASE 0xC00 // DWORD +#define IOMUX_BASE 0xD00 // BYTE +#define MISC_BASE 0xE00 +#define SERIAL_DEBUG_BASE 0x1000 +#define GFX_DAC_BASE 0x1400 +#define GPIO_BANK0_BASE 0x1500 // DWORD +//#define GPIO_BANK1_BASE 0x1600 // DWORD +//#define GPIO_BANK2_BASE 0x1700 // DWORD +#define CEC_BASE 0x1800 +#define XHCI_BASE 0x1C00 +#define ACDC_BASE 0x1D00 +#define AOAC_BASE 0x1E00 + + +// Chip type definition +#define CHIPTYPE_HUDSON2 (1 << 0) +#define CHIPTYPE_YUBA (1 << 1) + +// +// ROM SIG type definition +// +#define NUM_OF_ROMSIG_FILED 0x04 +#define XHCI_FILED_NUM 0x03 +#define ROMSIG_CFG_MASK 0x07 +#define XHCI_BOOT_RAM_OFFSET 0x8000 +#define INSTRUCTION_RAM_SIG 0x55AA +#define ROMSIG_SIG 0x55AA55AAul + +// RegSpace field (AB_INDEX[31:29] +#define AXINDC 0 // AXINDC +#define AXINDP 2 // AXINDP +#define ABCFG 6 // ABCFG +#define AXCFG 4 // AXCFG +#define RCINDXC 1 // PCIEIND +#define RCINDXP 3 // PCIEIND_P + +#define GPP_DEV_NUM 21 // +#define MAX_GPP_PORTS 4 + +#define PCIE_FORCE_GEN1_EFUSE_LOCATION 0x14 // EFUSE bit 160 +// +// ABCFG Registers +// +#define FCH_ABCFG_REG00 0x00 // VENDOR ID +#define FCH_ABCFG_REG08 0x08 // REVISION ID +#define FCH_ABCFG_REG40 0x40 // BL_EVENTCNT0LO +#define FCH_ABCFG_REG44 0x44 // BL_EVENTCNT1LO +#define FCH_ABCFG_REG48 0x48 // BL_EVENTCNTSEL +#define FCH_ABCFG_REG4A 0x4A // BL_EVENTCNT0HI +#define FCH_ABCFG_REG4B 0x4B // BL_EVENTCNT1HI +#define FCH_ABCFG_REG4C 0x4C // BL_EVENTCNTCTL +#define FCH_ABCFG_REG50 0x50 // MISCCTL_50 +#define FCH_ABCFG_REG54 0x54 // MISCCTL_54 +#define FCH_ABCFG_REG58 0x58 // BL RAB CONTROL + +#define FCH_ABCFG_REG60 0x60 // LINKWIDTH_CTL +#define FCH_ABCFG_REG64 0x64 // LINKWIDTH_UP_INTERVAL +#define FCH_ABCFG_REG68 0x68 // LINKWIDTH_DN_INVERVAL +#define FCH_ABCFG_REG6C 0x6C // LINKWIDTH_UPSTREAM_DWORDS +#define FCH_ABCFG_REG70 0x70 // LINKWIDTH_DOWNSTREAM_DWORDS +#define FCH_ABCFG_REG74 0x74 // LINKWIDTH_THRESHOLD_INCREASE +#define FCH_ABCFG_REG78 0x78 // LINKWIDTH_THRESHOLD_DECREASE + +#define FCH_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG88 0x88 // +#define FCH_ABCFG_REG8C 0x8C // +#define FCH_ABCFG_REG90 0x90 // BIF CONTROL 0 +#define FCH_ABCFG_REG94 0x94 // MSI CONTROL +#define FCH_ABCFG_REG98 0x98 // BIF CONTROL 1 +#define FCH_ABCFG_REG9C 0x9C // MISCCTL_9C +#define FCH_ABCFG_REGA0 0xA0 // BIF PHY CONTROL ENABLE +#define FCH_ABCFG_REGA4 0xA4 // BIF PHY CONTROL A4 +#define FCH_ABCFG_REGA8 0xA8 // BIF PHY CONTROL A8 +#define FCH_ABCFG_REGB0 0xB0 // HYPERFLASH-PCIE PORT MAPPING +#define FCH_ABCFG_REGB8 0xB8 // +#define FCH_ABCFG_REGB4 0xB4 // +#define FCH_ABCFG_REGBC 0xBC // +#define FCH_ABCFG_REGC0 0xC0 // PCIE_GPP_ENABLE +#define FCH_ABCFG_REGC4 0xC4 // PCIE_P2P_INT_MAP +#define FCH_ABCFG_REGD0 0xD0 // MCTP_VDM_TX_FIFO_DATA +#define FCH_ABCFG_REGD4 0xD4 // MCTP_VMD_TX_CONTROL +#define FCH_ABCFG_REGE0 0xE0 // MCTP_VDM_RX_FIFO_DATA +#define FCH_ABCFG_REGE4 0xE4 // MCTP_VDM_RX_FIFO_STATUS +#define FCH_ABCFG_REGEC 0xEC // MCTP_VDM_CONTROL +#define FCH_ABCFG_REGF0 0xF0 // GPP_UPSTREAM_CONTROL +#define FCH_ABCFG_REGF4 0xF4 // GPP_SYSTEM_ERROR_CONTROL +#define FCH_ABCFG_REGFC 0xFC // FCH_TRAP_CONTROL +#define FCH_ABCFG_REG100 0x100 // FCH_TRAP0_ADDRL +#define FCH_ABCFG_REG104 0x104 // FCH_TRAP0_ADDRH +#define FCH_ABCFG_REG108 0x108 // FCH_TRAP0_CMD +#define FCH_ABCFG_REG10C 0x10C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG110 0x110 // FCH_TRAP1_ADDRL +#define FCH_ABCFG_REG114 0x114 // FCH_TRAP1_ADDRH +#define FCH_ABCFG_REG118 0x118 // FCH_TRAP1_CMD +#define FCH_ABCFG_REG11C 0x11C // FCH_TRAP1_DATA +#define FCH_ABCFG_REG120 0x120 // FCH_TRAP2_ADDRL +#define FCH_ABCFG_REG124 0x124 // FCH_TRAP2_ADDRH +#define FCH_ABCFG_REG128 0x128 // FCH_TRAP2_CMD +#define FCH_ABCFG_REG12C 0x12C // FCH_TRAP2_DATA +#define FCH_ABCFG_REG130 0x130 // FCH_TRAP3_ADDRL +#define FCH_ABCFG_REG134 0x134 // FCH_TRAP3_ADDRH +#define FCH_ABCFG_REG138 0x138 // FCH_TRAP3_CMD +#define FCH_ABCFG_REG13C 0x13C // FCH_TRAP3_DATA +#define FCH_ABCFG_REG208 0x208 // KR New +#define FCH_ABCFG_REG300 0x300 // MCTP_VDM_RX_SMI_CONTROL +#define FCH_ABCFG_REG310 0x310 // BIF_GPP_STRAP_SYSTEM_0 +#define FCH_ABCFG_REG314 0x314 // BIF_GPP_STRAP_SYSTEM_1 +#define FCH_ABCFG_REG31C 0x31C // BIF_GPP_STRAP_LINK_CONTROL_0 +#define FCH_ABCFG_REG320 0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A +#define FCH_ABCFG_REG324 0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B +#define FCH_ABCFG_REG328 0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C +#define FCH_ABCFG_REG32C 0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D +#define FCH_ABCFG_REG330 0x330 // BIF_GPP_STRAP_BIF_0 +#define FCH_ABCFG_REG334 0x334 // BIF_GPP_STRAP_BIF_1 +#define FCH_ABCFG_REG338 0x338 // BIF_GPP_STRAP_BIF_2 +#define FCH_ABCFG_REG340 0x340 // BIF_GPP_STRAP_BIF_LANE_A +#define FCH_ABCFG_REG344 0x344 // BIF_GPP_STRAP_BIF_LANE_B +#define FCH_ABCFG_REG348 0x348 // BIF_GPP_STRAP_BIF_LANE_C +#define FCH_ABCFG_REG34C 0x34C // BIF_GPP_STRAP_BIF_LANE_D +#define FCH_ABCFG_REG350 0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0 +#define FCH_ABCFG_REG354 0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1 +#define FCH_ABCFG_REG404 0x404 // GPP0_SHADOW_COMMAND +#define FCH_ABCFG_REG418 0x418 // GPP0_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG41C 0x41C // GPP0_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG420 0x420 // GPP0_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG424 0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG428 0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG42C 0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG430 0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG43C 0x43C // GPP0_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG444 0x444 // GPP1_SHADOW_COMMAND +#define FCH_ABCFG_REG458 0x458 // GPP1_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG45C 0x45C // GPP1_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG460 0x460 // GPP1_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG464 0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG468 0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG46C 0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG470 0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG47C 0x47C // GPP1_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG484 0x484 // GPP2_SHADOW_COMMAND +#define FCH_ABCFG_REG498 0x498 // GPP2_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG49C 0x49C // GPP2_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4A0 0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A4 0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4A8 0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4AC 0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4B0 0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4BC 0x4BC // GPP2_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG4C4 0x4C4 // GPP3_SHADOW_COMMAND +#define FCH_ABCFG_REG4D8 0x4D8 // GPP3_SHADOW_BUS_NUMBER +#define FCH_ABCFG_REG4DC 0x4DC // GPP3_SHADOW_IO_LIMIT_BASE +#define FCH_ABCFG_REG4E0 0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E4 0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE +#define FCH_ABCFG_REG4E8 0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER +#define FCH_ABCFG_REG4EC 0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER +#define FCH_ABCFG_REG4F0 0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER +#define FCH_ABCFG_REG4FC 0x4FC // GPP3_SHADOW_BRIDGE_CONTROL +#define FCH_ABCFG_REG10040 0x10040ul // AL_EVENTCNT0LO +#define FCH_ABCFG_REG10044 0x10044ul // AL_EVENTCNT1LO +#define FCH_ABCFG_REG10048 0x10048ul // AL_EVENTCNTSEL +#define FCH_ABCFG_REG1004A 0x1004Aul // AL_EVENTCNT0HI +#define FCH_ABCFG_REG1004B 0x1004Bul // AL_EVENTCNT1HI +#define FCH_ABCFG_REG1004C 0x1004Cul // AL_EVENTCNTCTL +#define FCH_ABCFG_REG10050 0x10050ul // MISCCTL_10050 +#define FCH_ABCFG_REG10054 0x10054ul // AL_ARB_CTL +#define FCH_ABCFG_REG10056 0x10056ul // AL_CLK_CTL +#define FCH_ABCFG_REG10058 0x10058ul // AL RAB CONTROL +#define FCH_ABCFG_REG1005C 0x1005Cul // AL MLT CONTROL +#define FCH_ABCFG_REG10060 0x10060ul // AL DMA PREFETCH ENABLE +#define FCH_ABCFG_REG10064 0x10064ul // AL DMA PREFETCH FLUSH CONTROL +#define FCH_ABCFG_REG10068 0x10068ul // AL PREFETCH LIMIT +#define FCH_ABCFG_REG1006C 0x1006Cul // AL DMA PREFETCH CONTROL +#define FCH_ABCFG_REG10070 0x10070ul // MISCCTL_10070 +#define FCH_ABCFG_REG10080 0x10080ul // CLKMUXSTATUS +#define FCH_ABCFG_REG10090 0x10090ul // BIF CONTROL 0 +#define FCH_ABCFG_REG1009C 0x1009Cul // MISCCTL_1009C + +// +// RCINDX_P Registers +// +#define FCH_RCINDXP_REG01 0x01 | RCINDXP << 29 // PCIEP_SCRATCH +#define FCH_RCINDXP_REG02 0x02 | RCINDXP << 29 // +#define FCH_RCINDXP_REG10 0x10 | RCINDXP << 29 // +#define FCH_RCINDXP_REG20 0x20 | RCINDXP << 29 // PCIE_TX_CNTL +#define FCH_RCINDXP_REG21 0x21 | RCINDXP << 29 // PCIE_TX_REQUESTER_ID +#define FCH_RCINDXP_REG50 0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS +#define FCH_RCINDXP_REG6A 0x6A | RCINDXP << 29 // +#define FCH_RCINDXP_REG70 0x70 | RCINDXP << 29 // PCIE_RX_CNTL +#define FCH_RCINDXP_REGA0 0xA0 | RCINDXP << 29 // PCIE_LC_CNTL +#define FCH_RCINDXP_REGA1 0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL +#define FCH_RCINDXP_REGA2 0xA2 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA4 0xA4 | RCINDXP << 29 // +#define FCH_RCINDXP_REGA5 0xA5 | RCINDXP << 29 // PCIE_LC_STATE0 +#define FCH_RCINDXP_REGC0 0xC0 | RCINDXP << 29 // + +// +// RCINDX_C Registers +// +#define FCH_RCINDXC_REG02 0x02 | RCINDXC << 29 // PCIE_HW_DEBUG +#define FCH_RCINDXC_REG10 0x10 | RCINDXC << 29 // PCIE_CNTL +#define FCH_RCINDXC_REG40 0x40 | RCINDXC << 29 // PCIE_P_CNTL +#define FCH_RCINDXC_REG65 0x65 | RCINDXC << 29 // PCIE_P_PAD_FORCE_DIS +#define FCH_RCINDXC_REGC0 0xC0 | RCINDXC << 29 // PCIE_STRAP_MISC +#define FCH_RCINDXC_REGC1 0xC1 | RCINDXC << 29 // PCIE_STRAP_MISC2 + + +// +// AXINDC Registers +// +#define FCH_AX_INDXC_REG02 0x02 // PCIEP_HW_DEBUG +#define FCH_AX_INDXC_REG10 0x10 +#define FCH_AX_INDXC_REG30 0x30 +#define FCH_AX_DATAC_REG34 0x34 +#define FCH_AX_INDXP_REG38 0x38 +#define FCH_AX_DATAP_REG3C 0x3C +#define FCH_AX_INDXC_REG40 0x40 | AXINDC << 29 +#define FCH_AX_INDXC_REGA4 0xA4 | AXINDC << 29 + +#define FCH_AX_INDXP_REG02 0x02 | AXINDP << 29 +#define FCH_AX_INDXP_REGA0 0xA0 | AXINDP << 29 +#define FCH_AX_INDXP_REGA4 0xA4 | AXINDP << 29 +#define FCH_AX_INDXP_REGB1 0xB1 | AXINDP << 29 + +#define FCH_AX_CFG_REG68 0x68 | AXCFG << 29 +#define FCH_AX_CFG_REG88 0x88 | AXCFG << 29 + +#define FCH_AB_REG04 0x04 +#define FCH_AB_REG40 0x40 + +//Sata Port Configuration +#define SIX_PORTS 0 +#define FOUR_PORTS 1 + +#define SATA_EFUSE_LOCATION 0x10 // EFUSE bit 133 +#define SATA_DH_EFUSE_LOCATION 0x11 // EFUSE bit 138 +#define SATA_FIS_BASE_EFUSE_LOC 0x15 // EFUSE bit 169 +#define SATA_EFUSE_BIT 0x20 // +#define SATA_DH_EFUSE_BIT 0x04 // +#define FCH_SATA_REG00 0x000 // Vendor ID - R- 16 bits +#define FCH_SATA_REG02 0x002 // Device ID - RW -16 bits +#define FCH_SATA_REG04 0x004 // PCI Command - RW - 16 bits +#define FCH_SATA_REG06 0x006 // PCI Status - RW - 16 bits +#define FCH_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08 +#define FCH_SATA_REG0C 0x00C // Cache Line Size - R/W - 8bits +#define FCH_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits +#define FCH_SATA_REG0E 0x00E // Header Type - R - 8 bits +#define FCH_SATA_REG0F 0x00F // BIST - R - 8 bits +#define FCH_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits +#define FCH_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits +#define FCH_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits +#define FCH_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits +#define FCH_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits +#define FCH_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits +#define FCH_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits +#define FCH_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits +#define FCH_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits +#define FCH_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits +#define FCH_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits +#define FCH_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits +#define FCH_SATA_REG3E 0x03E // Min Grant - R - 8 bits +#define FCH_SATA_REG3F 0x03F // Max Latency - R - 8 bits +#define FCH_SATA_REG40 0x040 // Configuration - RW - 32 bits +#define FCH_SATA_REG44 0x044 // Software Data Register - RW - 32 bits +#define FCH_SATA_REG48 0x048 +#define FCH_SATA_REG4C 0x04C +#define FCH_SATA_REG50 0x050 // Message Capability - R - 16 bits +#define FCH_SATA_REG52 0x052 // Message Control - R/W - 16 bits +#define FCH_SATA_REG54 0x054 // Message Address - R/W - 32 bits +#define FCH_SATA_REG58 0x058 // Message Data - R/W - 16 bits +#define FCH_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits +#define FCH_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits +#define FCH_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits +#define FCH_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits +#define FCH_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits +#define FCH_SATA_REG68 0x068 // MSI Program - R/W - 8 bits +#define FCH_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits +#define FCH_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits +#define FCH_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_REG86 0x086 // PY Global Control +#define FCH_SATA_REG87 0x087 +#define FCH_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8A 0x08A +#define FCH_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG8E 0x08E +#define FCH_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG92 0x092 +#define FCH_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune (0:23) +#define FCH_SATA_REG96 0x096 +#define FCH_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_REGA0 0x0A0 // +#define FCH_SATA_REGA4 0x0A4 // +#define FCH_SATA_REGA5 0x0A5 //; +#define FCH_SATA_REGA8 0x0A8 // +#define FCH_SATA_REGAD 0x0AD //; +#define FCH_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_REGB5 0x0B5 //; +#define FCH_SATA_REGBD 0x0BD //; +#define FCH_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits +#define FCH_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits + +#define FCH_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG1C 0x01C +#define FCH_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits +#define FCH_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits +#define FCH_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits +#define FCH_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define FCH_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits +#define FCH_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits +#define FCH_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits +#define FCH_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits +#define FCH_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits +#define FCH_SATA_BAR5_REG8C 0x08C // IDE0 Read Data - RW - 32 bits +#define FCH_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits +#define FCH_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits +#define FCH_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits +#define FCH_SATA_BAR5_REGCC 0x0CC // Read/Write Data - RW - 32 bits +#define FCH_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits +#define FCH_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits +#define FCH_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define FCH_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits +#define FCH_SATA_BAR5_REGF8 0x0F8 // PORT Configuration +#define FCH_SATA_BAR5_REGFC 0x0FC +#define FCH_SATA_BAR5_REG100 0x0100 // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180 +#define FCH_SATA_BAR5_REG104 0x0104 // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel +#define FCH_SATA_BAR5_REG108 0x0108 // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel +#define FCH_SATA_BAR5_REG10C 0x010C // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel +#define FCH_SATA_BAR5_REG144 0x0144 // Serial ATA PY Configuration - RW - 32 bits +#define FCH_SATA_BAR5_REG148 0x0148 // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)] +#define FCH_SATA_BAR5_REG14C 0x014C // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)] +#define FCH_SATA_BAR5_REG120 0x0120 // +#define FCH_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status +#define FCH_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control +#define FCH_SATA_BAR5_REG130 0x0130 +#define FCH_SATA_BAR5_REG1B0 0x01B0 +#define FCH_SATA_BAR5_REG230 0x0230 +#define FCH_SATA_BAR5_REG2B0 0x02B0 +#define FCH_SATA_BAR5_REG330 0x0330 +#define FCH_SATA_BAR5_REG3B0 0x03B0 +#define FCH_SATA_BAR5_REG430 0x0430 +#define FCH_SATA_BAR5_REG4B0 0x04B0 + + +// USB ports +#define NUM_USB1_PORTS 5 +#define NUM_USB2_PORTS 5 +#define NUM_USB3_PORTS 4 +#define NUM_USB4_PORTS 2 +#define NUM_XHC0_PORTS 2 +#define NUM_XHC1_PORTS 2 + + +// +// USB OHCI Device 0x7807 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0 +// Device 20 (0x14) Func 5 (FL) 0x7809 +// +#define FCH_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002ul) +#define FCH_OHCI_REG04 0x04 // Command - RW +#define FCH_OHCI_REG06 0x06 // Status - R +#define FCH_OHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_OHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_OHCI_REG10 0x10 // Bar_OCI - RW +#define FCH_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW +#define FCH_OHCI_REG34 0x34 // Capability Pointer - R +#define FCH_OHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_OHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_OHCI_REG40 0x40 // Config Timers - RW +#define FCH_OHCI_REG42 0x42 // Port Disable Control - RW (800) +#define FCH_OHCI_REG46 0x46 // USB PHY Battery Charger - RW (800) +#define FCH_OHCI_REG48 0x48 // Port Force Reset - RW (800) +#define FCH_OHCI_REG4C 0x4C // MSI - RW (800) +#define FCH_OHCI_REG50 0x50 // Misc Control - RW +#define FCH_OHCI_REG51 0x51 +#define FCH_OHCI_REG52 0x52 +#define FCH_OHCI_REG58 0x58 // Over Current Control - RW +#define FCH_OHCI_REG5C 0x5C // Over Current Control - RW +#define FCH_OHCI_REG60 0x60 // Serial Bus Release Number - RW +#define FCH_OHCI_REG68 0x68 // Over Current PME Enable - RW +#define FCH_OHCI_REG74 0x74 // Target Timeout Control - RW +#define FCH_OHCI_REG80 0x80 // +#define FCH_OHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_OHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_OHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_OHCI_REGE4 0x0E4 // HT MSI Support +#define FCH_OHCI_REGF0 0x0F0 // Function Level Reset Capability +#define FCH_OHCI_REGF4 0x0F4 // Function Level Reset Control + +#define FCH_OHCI_BAR_REG00 0x00 // cRevision - R +#define FCH_OHCI_BAR_REG04 0x04 // cControl +#define FCH_OHCI_BAR_REG08 0x08 // cCommandStatus +#define FCH_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW +#define FCH_OHCI_BAR_REG10 0x10 // cInterruptEnable +#define FCH_OHCI_BAR_REG14 0x14 // cInterruptDisable +#define FCH_OHCI_BAR_REG18 0x18 // HcCCA +#define FCH_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED +#define FCH_OHCI_BAR_REG20 0x20 // HcControleadED +#define FCH_OHCI_BAR_REG24 0x24 // cControlCurrentED RW +#define FCH_OHCI_BAR_REG28 0x28 // HcBulkeadED +#define FCH_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW +#define FCH_OHCI_BAR_REG30 0x30 // HcDoneead +#define FCH_OHCI_BAR_REG34 0x34 // cFmInterval +#define FCH_OHCI_BAR_REG38 0x38 // cFmRemaining +#define FCH_OHCI_BAR_REG3C 0x3C // cFmNumber +#define FCH_OHCI_BAR_REG40 0x40 // cPeriodicStart +#define FCH_OHCI_BAR_REG44 0x44 // HcLSThresold +#define FCH_OHCI_BAR_REG48 0x48 // HcRDescriptorA +#define FCH_OHCI_BAR_REG4C 0x4C // HcRDescriptorB +#define FCH_OHCI_BAR_REG50 0x50 // HcRStatus +#define FCH_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800) +#define FCH_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800) +#define FCH_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800) + +#define FCH_OHCI_PORTSC_CCS 0x1 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PES 0x2 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PSS 0x4 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PPS 0x100 // HcRhPortStatus +#define FCH_OHCI_PORTSC_LSDA 0x200 // HcRhPortStatus +#define FCH_OHCI_PORTSC_PRS 0x10 // HcRhPortStatus + +// +// USB EHCI Device 0x7808 +// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2 +// +#define FCH_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_EHCI_REG04 0x04 // Command - RW +#define FCH_EHCI_REG06 0x06 // Status - R +#define FCH_EHCI_REG08 0x08 // Revision ID/Class Code - R +#define FCH_EHCI_REG0C 0x0C // Miscellaneous - RW +#define FCH_EHCI_REG10 0x10 // BAR - RW +#define FCH_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW +#define FCH_EHCI_REG34 0x34 // Capability Pointer - R +#define FCH_EHCI_REG3C 0x3C // Interrupt Line - RW +#define FCH_EHCI_REG3D 0x3D // Interrupt Line - RW +#define FCH_EHCI_REG40 0x40 // Config Timers - RW +#define FCH_EHCI_REG4C 0x4C // MSI - RW +#define FCH_EHCI_REG50 0x50 // EHCI Misc Control - RW +#define FCH_EHCI_REG54 0x54 // EHCI Misc Control - RW +#define FCH_EHCI_REG60 0x60 // SBRN - R +#define FCH_EHCI_REG61 0x61 // FLADJ - RW +#define FCH_EHCI_REG62 0x62 // PORTWAKECAP - RW +#define FCH_EHCI_REG64 0x64 // Misc Control 2 - RW +#define FCH_EHCI_REG70 0x70 // Over Current Control - RW +#define FCH_EHCI_REG74 0x74 // EHCI Misc Control2 - RW +#define FCH_EHCI_REG84 0x84 // HUB Configure 1 - RW +#define FCH_EHCI_REG88 0x88 // - RW +#define FCH_EHCI_REG90 0x90 // HUB Configure 4 - RW +#define FCH_EHCI_REGA0 0xA0 // +#define FCH_EHCI_REGA4 0xA4 // +#define FCH_EHCI_REGC0 0x0C0 // PME control - RW (800) +#define FCH_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800) +#define FCH_EHCI_REGD0 0x0D0 // MSI Control - RW +#define FCH_EHCI_REGD4 0x0D4 // MSI Address - RW +#define FCH_EHCI_REGD8 0x0D8 // MSI Data - RW +#define FCH_EHCI_REGE4 0x0E4 // EHCI Debug Port Support - RW (800) +#define FCH_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800) +#define FCH_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800) + +#define FCH_EHCI_BAR_REG00 0x00 // CAPLENGT - R +#define FCH_EHCI_BAR_REG02 0x002 // CIVERSION- R +#define FCH_EHCI_BAR_REG04 0x004 // CSPARAMS - R +#define FCH_EHCI_BAR_REG08 0x008 // CCPARAMS - R +#define FCH_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R + +#define FCH_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits +#define FCH_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits +#define FCH_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits +#define FCH_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits +#define FCH_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits +#define FCH_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits +#define FCH_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits +#define FCH_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits +#define FCH_EHCI_BAR_REG64 0x064 // PORTSC (1-N_PORTS) -RW - 32 bits +#define FCH_EHCI_BAR_REGA0 0x0A0 // DebugPort MISC Control - RW - 32 bits (800) +#define FCH_EHCI_BAR_REGA4 0x0A4 // Packet Buffer Threshold Values - RW - 32 bits +#define FCH_EHCI_BAR_REGA8 0x0A8 // USB PHY Status 0 - R +#define FCH_EHCI_BAR_REGAC 0x0AC // USB PHY Status 1 - R +#define FCH_EHCI_BAR_REGB0 0x0B0 // USB PHY Status 2 - R +#define FCH_EHCI_BAR_REGB4 0x0B4 // UTMI Control - RW (800) +#define FCH_EHCI_BAR_REGB8 0x0B8 // Loopback Test +#define FCH_EHCI_BAR_REGBC 0x0BC // EHCI MISC Control +#define FCH_EHCI_BAR_REGC0 0x0C0 // USB PHY Calibration +#define FCH_EHCI_BAR_REGC4 0x0C4 // USB Common PHY Control +#define FCH_EHCI_BAR_REGC8 0x0C8 // EHCI Debug Purpose +#define FCH_EHCI_BAR_REGCC 0x0CC // Ehci Spare 1 (800) ** +#define FCH_EHCI_BAR_REGD0 0x0D0 +#define FCH_EHCI_BAR_REGD4 0x0D4 +#define FCH_EHCI_BAR_REGDC 0x0DC +#define FCH_EHCI_BAR_REG100 0x100 // USB debug port + +// +// USB XHCI Device 0x7812/0x7814 +// Device 16 (0x10) Func 0/1 +// +#define FCH_XHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define FCH_XHCI_REG04 0x04 // Command - RW +#define FCH_XHCI_REG10 0x10 // Bar0 +#define FCH_XHCI_REG2C 0x2C // Sub System ID +#define FCH_XHCI_REG40 0x40 // Index0 +#define FCH_XHCI_REG44 0x44 // Data0 +#define FCH_XHCI_REG48 0x48 // Index1 +#define FCH_XHCI_REG4C 0x4C // Data0 +#define FCH_XHCI_REG54 0x54 // PME Control/Status +#define XHCI_EFUSE_LOCATION 0x18 // EFUSE bit 192, 193 + +#define FCH_XHCI_BAR_REG420 0x420 // Port Status and Control +#define FCH_XHCI_PORTSC_CCS 0x1 // Port Status and Control +#define FCH_XHCI_PORTSC_PED 0x2 // Port Status and Control +#define FCH_XHCI_PORTSC_PLS 0x1E0 // Port Status and Control +#define FCH_XHCI_PORTSC_SPEED 0x3C00 // Port Status and Control +#define FCH_XHCI_PORTSC_PR 0x10 // Port Status and Control + +// +// FCH CFG device 0x780B +// Device 20 (0x14) Func 0 +// +#define FCH_CFG_REG00 0x000 // VendorID - R +#define FCH_CFG_REG02 0x002 // DeviceID - R +#define FCH_CFG_REG04 0x004 // Command- RW +#define FCH_CFG_REG05 0x005 // Command- RW +#define FCH_CFG_REG06 0x006 // STATUS- RW +#define FCH_CFG_REG08 0x008 // Revision ID/Class Code- R +#define FCH_CFG_REG0A 0x00A // +#define FCH_CFG_REG0B 0x00B // +#define FCH_CFG_REG0C 0x00C // Cache Line Size- R +#define FCH_CFG_REG0D 0x00D // Latency Timer- R +#define FCH_CFG_REG0E 0x00E // Header Type- R +#define FCH_CFG_REG0F 0x00F // BIST- R +#define FCH_CFG_REG10 0x010 // Base Address 0- R +#define FCH_CFG_REG11 0x011 //; +#define FCH_CFG_REG12 0x012 //; +#define FCH_CFG_REG13 0x013 //; +#define FCH_CFG_REG14 0x014 // Base Address 1- R +#define FCH_CFG_REG18 0x018 // Base Address 2- R +#define FCH_CFG_REG1C 0x01C // Base Address 3- R +#define FCH_CFG_REG20 0x020 // Base Address 4- R +#define FCH_CFG_REG24 0x024 // Base Address 5- R +#define FCH_CFG_REG28 0x028 // Cardbus CIS Pointer- R +#define FCH_CFG_REG2C 0x02C // Subsystem Vendor ID- W +#define FCH_CFG_REG2E 0x02E // Subsystem ID- W +#define FCH_CFG_REG30 0x030 // Expansion ROM Base Address - R +#define FCH_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00 +#define FCH_CFG_REG3C 0x03C // Interrupt Line - R +#define FCH_CFG_REG3D 0x03D // Interrupt Pin - R +#define FCH_CFG_REG3E 0x03E // Min_Gnt - R +#define FCH_CFG_REG3F 0x03F // Max_Lat - R +#define FCH_CFG_REG90 0x090 // Smbus Base Address - R +#define FCH_CFG_REG9C 0x09C // SBResourceMMIO_BASE + +// +// FCH SATA IDE device +// Device 20 (0x14) Func 1 +// + +#define FCH_IDE_REG00 0x00 // Vendor ID +#define FCH_IDE_REG02 0x02 // Device ID +#define FCH_IDE_REG04 0x04 // Command +#define FCH_IDE_REG06 0x06 // Status +#define FCH_IDE_REG08 0x08 // Revision ID/Class Code +#define FCH_IDE_REG09 0x09 // Class Code +#define FCH_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID +#define FCH_IDE_REG40 0x40 // Configuration - RW - 32 bits +#define FCH_IDE_REG34 0x34 +#define FCH_IDE_REG62 0x62 // IDE Internal Control +#define FCH_IDE_REG63 0x63 // IDE Internal Control +// +// FCH AZALIA device 0x780D +// Device 20 (0x14) Func 2 +// +#define ATI_AZALIA_ExtBlk_Addr 0x0F8 +#define ATI_AZALIA_ExtBlk_DATA 0x0FC + +#define FCH_AZ_REG00 0x00 // Vendor ID - R +#define FCH_AZ_REG02 0x02 // Device ID - R/W +#define FCH_AZ_REG04 0x04 // PCI Command +#define FCH_AZ_REG06 0x06 // PCI Status - R/W +#define FCH_AZ_REG08 0x08 // Revision ID +#define FCH_AZ_REG09 0x09 // Programming Interface +#define FCH_AZ_REG0A 0x0A // Sub Class Code +#define FCH_AZ_REG0B 0x0B // Base Class Code +#define FCH_AZ_REG0C 0x0C // Cache Line Size - R/W +#define FCH_AZ_REG0D 0x0D // Latency Timer +#define FCH_AZ_REG0E 0x0E // Header Type +#define FCH_AZ_REG0F 0x0F // BIST +#define FCH_AZ_REG10 0x10 // Lower Base Address Register +#define FCH_AZ_REG14 0x14 // Upper Base Address Register +#define FCH_AZ_REG2C 0x2C // Subsystem Vendor ID +#define FCH_AZ_REG2D 0x2D // Subsystem ID +#define FCH_AZ_REG34 0x34 // Capabilities Pointer +#define FCH_AZ_REG3C 0x3C // Interrupt Line +#define FCH_AZ_REG3D 0x3D // Interrupt Pin +#define FCH_AZ_REG3E 0x3E // Minimum Grant +#define FCH_AZ_REG3F 0x3F // Maximum Latency +#define FCH_AZ_REG40 0x40 // Misc Control 1 +#define FCH_AZ_REG42 0x42 // Misc Control 2 Register +#define FCH_AZ_REG43 0x43 // Misc Control 3 Register +#define FCH_AZ_REG44 0x44 // Interrupt Pin Control Register +#define FCH_AZ_REG46 0x46 // Debug Control Register +#define FCH_AZ_REG4C 0x4C +#define FCH_AZ_REG50 0x50 // Power Management Capability ID +#define FCH_AZ_REG52 0x52 // Power Management Capabilities +#define FCH_AZ_REG54 0x54 // Power Management Control/Status +#define FCH_AZ_REG60 0x60 // MSI Capability ID +#define FCH_AZ_REG62 0x62 // MSI Message Control +#define FCH_AZ_REG64 0x64 // MSI Message Lower Address +#define FCH_AZ_REG68 0x68 // MSI Message Upper Address +#define FCH_AZ_REG6C 0x6C // MSI Message Data + +#define FCH_AZ_BAR_REG00 0x00 // Global Capabilities - R +#define FCH_AZ_BAR_REG02 0x02 // Minor Version - R +#define FCH_AZ_BAR_REG03 0x03 // Major Version - R +#define FCH_AZ_BAR_REG04 0x04 // Output Payload Capability - R +#define FCH_AZ_BAR_REG06 0x06 // Input Payload Capability - R +#define FCH_AZ_BAR_REG08 0x08 // Global Control - R/W +#define FCH_AZ_BAR_REG0C 0x0C // Wake Enable - R/W +#define FCH_AZ_BAR_REG0E 0x0E // State Change Status - R/W +#define FCH_AZ_BAR_REG10 0x10 // Global Status - R/W +#define FCH_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R +#define FCH_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R +#define FCH_AZ_BAR_REG20 0x20 // Interrupt Control - R/W +#define FCH_AZ_BAR_REG24 0x24 // Interrupt Status - R/W +#define FCH_AZ_BAR_REG30 0x30 // Wall Clock Counter - R +#define FCH_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W +#define FCH_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W +#define FCH_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW +#define FCH_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W +#define FCH_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W +#define FCH_AZ_BAR_REG4C 0x4C // CORB Control - R/W +#define FCH_AZ_BAR_REG4D 0x4D // CORB Status - R/W +#define FCH_AZ_BAR_REG4E 0x4E // CORB Size - R/W +#define FCH_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW +#define FCH_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW +#define FCH_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW +#define FCH_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W +#define FCH_AZ_BAR_REG5C 0x5C // RIRB Control - R/W +#define FCH_AZ_BAR_REG5D 0x5D // RIRB Status - R/W +#define FCH_AZ_BAR_REG5E 0x5E // RIRB Size - R/W +#define FCH_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W +#define FCH_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W +#define FCH_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W +#define FCH_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W +#define FCH_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R + +// +// FCH LPC Device 0x780E +// Device 20 (0x14) Func 3 +// +#define FCH_LPC_REG00 0x00 // VID- R +#define FCH_LPC_REG02 0x02 // DID- R +#define FCH_LPC_REG04 0x04 // CMD- RW +#define FCH_LPC_REG06 0x06 // STATUS- RW +#define FCH_LPC_REG08 0x08 // Revision ID/Class Code - R +#define FCH_LPC_REG0C 0x0C // Cache Line Size - R +#define FCH_LPC_REG0D 0x0D // Latency Timer - R +#define FCH_LPC_REG0E 0x0E // Header Type - R +#define FCH_LPC_REG0F 0x0F // BIST- R +#define FCH_LPC_REG10 0x10 // Base Address Reg 0- RW* +#define FCH_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro +#define FCH_LPC_REG34 0x34 // Capabilities Pointer - Ro +#define FCH_LPC_REG40 0x40 // PCI Control - RW +#define FCH_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW +#define FCH_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW +#define FCH_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW +#define FCH_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW +#define FCH_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW +#define FCH_LPC_REG49 0x49 // LPC Sync Timeout Count - RW +#define FCH_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW +#define FCH_LPC_REG4C 0x4C // Memory Range Register - RW +#define FCH_LPC_REG50 0x50 // Rom Protect 0 - RW +#define FCH_LPC_REG54 0x54 // Rom Protect 1 - RW +#define FCH_LPC_REG58 0x58 // Rom Protect 2 - RW +#define FCH_LPC_REG5C 0x5C // Rom Protect 3 - RW +#define FCH_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles - +#define FCH_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles - +#define FCH_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW +#define FCH_LPC_REG65 0x65 +#define FCH_LPC_REG66 0x66 +#define FCH_LPC_REG67 0x67 +#define FCH_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW +#define FCH_LPC_REG69 0x69 +#define FCH_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW +#define FCH_LPC_REG6B 0x6B +#define FCH_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW +#define FCH_LPC_REG6D 0x6D +#define FCH_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW +#define FCH_LPC_REG6F 0x6F +#define FCH_LPC_REG70 0x70 // Firmware ub Select - RW* +#define FCH_LPC_REG71 0x71 +#define FCH_LPC_REG72 0x72 +#define FCH_LPC_REG73 0x73 +#define FCH_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R +#define FCH_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R +#define FCH_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R +#define FCH_LPC_REG9C 0x9C +#define FCH_LPC_REG80 0x80 // MSI Capability Register- R +#define FCH_LPC_REGA0 0x0A0 // SPI base address +#define FCH_LPC_REGA1 0x0A1 // SPI base address +#define FCH_LPC_REGA2 0x0A2 // SPI base address +#define FCH_LPC_REGA3 0x0A3 // SPI base address +#define FCH_LPC_REGA4 0x0A4 +#define FCH_LPC_REGB8 0x0B8 +#define FCH_LPC_REGBA 0x0BA // EcControl +#define FCH_LPC_REGBB 0x0BB // HostControl +#define FCH_LPC_REGC8 0x0C8 +#define FCH_LPC_REGCC 0x0CC // AutoRomCfg +#define FCH_LPC_REGD0 0x0D0 +#define FCH_LPC_REGD3 0x0D3 +#define FCH_LPC_REGD4 0x0D4 + +// +// FCH PCIB 0x780F +// Device 20 (0x14) Func 4 +// +#define FCH_PCIB_REG04 0x04 // Command +#define FCH_PCIB_REG0D 0x0D // Primary Master Latency Timer +#define FCH_PCIB_REG1B 0x1B // Secondary Latency Timer +#define FCH_PCIB_REG1C 0x1C // IO Base +#define FCH_PCIB_REG1D 0x1D // IO Limit +#define FCH_PCIB_REG40 0x40 // CPCTRL +#define FCH_PCIB_REG42 0x42 // CLKCTRL +#define FCH_PCIB_REG48 0x48 // +#define FCH_PCIB_REG4A 0x4A // PCICLK Enable Bits +#define FCH_PCIB_REG4B 0x4B // Misc Control +#define FCH_PCIB_REG4C 0x4C // AutoClockRun Control +#define FCH_PCIB_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop Override +#define FCH_PCIB_REG65 0x65 // Misc Control +#define FCH_PCIB_REG66 0x66 // Misc Control +// +// FCH GEC 0x14E4 0x1699 +// Device 20 (0x14) Func 6 +// +#define FCH_GEC_REG10 0x10 // GEC BAR + +// +// FCH SD +// Device 20 (0x14) Func 7 +// +#define SD_PCI_REG10 0x10 +#define SD_PCI_REG2C 0x2C +#define SD_PCI_REGA4 0xA4 +#define SD_PCI_REGA8 0xA8 +#define SD_PCI_REGAC 0xAC +#define SD_PCI_REGB0 0xB0 +#define SD_PCI_REGB8 0xB8 +#define SD_PCI_REGBC 0xBC +#define SD_PCI_REGD0 0xD0 +#define SD_PCI_REGF0 0xF0 +#define SD_PCI_REGF4 0xF4 +#define SD_PCI_REGF8 0xF8 +#define SD_PCI_REGFC 0xFC +#define FCH_SD_BAR_REG28 0x28 // SDHC_CTRL1 +#define SD_CARD_PRESENT BIT0 +#define FCH_SD_BAR_REG2C 0x2C // SDHC_CTRL2 +#define FCH_SD_FREQUENCY_SLT BIT2 +#define FCH_SD_BAR_REG3C 0x3C // SDHC_HOST_CTRL2 +#define FCH_SD_1_8V BIT3 + +// +// FCH MMIO Base (SMI) +// offset : 0x200 +// +#define FCH_SMI_REG00 0x00 // EventStatus +#define FCH_SMI_REG04 0x04 // EventEnable +#define FCH_SMI_REG08 0x08 // SciTrig +#define FCH_SMI_REG0C 0x0C // SciLevl +#define FCH_SMI_REG10 0x10 // SmiSciStatus +#define FCH_SMI_REG14 0x14 // SmiSciEn +#define FCH_SMI_REG18 0x18 // ForceSciEn +#define FCH_SMI_REG1C 0x1C // SciRwData +#define FCH_SMI_REG3C 0x3C // DataErrorStatus +#define FCH_SMI_REG20 0x20 // SciS0En +#define FCH_SMI_Gevent0 0x40 // SciMap0 +#define FCH_SMI_Gevent1 0x41 // SciMap1 +#define FCH_SMI_Gevent2 0x42 // SciMap2 +#define FCH_SMI_Gevent3 0x43 // SciMap3 +#define FCH_SMI_Gevent4 0x44 // SciMap4 +#define FCH_SMI_Gevent5 0x45 // SciMap5 +#define FCH_SMI_Gevent6 0x46 // SciMap6 +#define FCH_SMI_Gevent7 0x47 // SciMap7 +#define FCH_SMI_Gevent8 0x48 // SciMap8 +#define FCH_SMI_Gevent9 0x49 // SciMap9 +#define FCH_SMI_Gevent10 0x4A // SciMap10 +#define FCH_SMI_Gevent11 0x4B // SciMap11 +#define FCH_SMI_Gevent12 0x4C // SciMap12 +#define FCH_SMI_Gevent13 0x4D // SciMap13 +#define FCH_SMI_Gevent14 0x4E // SciMap14 +#define FCH_SMI_Gevent15 0x4F // SciMap15 +#define FCH_SMI_Gevent16 0x50 // SciMap16 +#define FCH_SMI_Gevent17 0x51 // SciMap17 +#define FCH_SMI_Gevent18 0x52 // SciMap18 +#define FCH_SMI_Gevent19 0x53 // SciMap19 +#define FCH_SMI_Gevent20 0x54 // SciMap20 +#define FCH_SMI_Gevent21 0x55 // SciMap21 +#define FCH_SMI_Gevent22 0x56 // SciMap22 +#define FCH_SMI_Gevent23 0x57 // SciMap23 +#define FCH_SMI_Usbwakup0 0x58 // SciMap24 +#define FCH_SMI_Usbwakup1 0x59 // SciMap25 +#define FCH_SMI_Usbwakup2 0x5A // SciMap26 +#define FCH_SMI_Usbwakup3 0x5B // SciMap27 +#define FCH_SMI_SBGppPme0 0x5C // SciMap28 +#define FCH_SMI_SBGppPme1 0x5D // SciMap29 +#define FCH_SMI_SBGppPme2 0x5E // SciMap30 +#define FCH_SMI_SBGppPme3 0x5F // SciMap31 +#define FCH_SMI_SBGppHp0 0x60 // SciMap32 +#define FCH_SMI_SBGppHp1 0x61 // SciMap33 +#define FCH_SMI_SBGppHp2 0x62 // SciMap34 +#define FCH_SMI_SBGppHp3 0x63 // SciMap35 +#define FCH_SMI_AzaliaPme 0x64 // SciMap36 +#define FCH_SMI_SataGevent0 0x65 // SciMap37 +#define FCH_SMI_SataGevent1 0x66 // SciMap38 +#define FCH_SMI_GecPme 0x67 // SciMap39 +#define FCH_SMI_IMCGevent0 0x68 // SciMap40 +#define FCH_SMI_IMCGevent1 0x69 // SciMap41 +#define FCH_SMI_CIRPme 0x6A // SciMap42 +#define FCH_SMI_WakePinGevent 0x6B // SciMap43 +#define FCH_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent +#define FCH_SMI_ASFMasterIntr 0x6D // SciMap45 +#define FCH_SMI_ASFSlaveIntr 0x6E // SciMap46 +#define FCH_SMI_SMBUS0 0x6F // SciMap47 +#define FCH_SMI_TWARN 0x70 // SciMap48 +#define FCH_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr +#define FCH_SMI_iLLB 0x72 // SciMap50 +#define FCH_SMI_PowerButton 0x73 // SciMap51 +#define FCH_SMI_ProcHot 0x74 // SciMap52 +#define FCH_SMI_APUHwAssertion 0x75 // SciMap53 +#define FCH_SMI_APUSciAssertion 0x76 // SciMap54 +#define FCH_SMI_RAS 0x77 // SciMap55 +#define FCH_SMI_xHC0Pme 0x78 // SciMap56 +#define FCH_SMI_xHC1Pme 0x79 // SciMap57 +#define FCH_SMI_AcDcWake 0x7A // SciMap58 + +// Empty from 0x72-0x7F +//#Define FCH_SMI_REG7C 0x7F // SciMap63 *** + +#define FCH_SMI_REG80 0x80 // SmiStatus0 +#define FCH_SMI_REG84 0x84 // SmiStatus1 +#define FCH_SMI_REG88 0x88 // SmiStatus2 +#define FCH_SMI_REG8C 0x8C // SmiStatus3 +#define FCH_SMI_REG90 0x90 // SmiStatus4 +#define FCH_SMI_REG94 0x94 // SmiPointer +#define FCH_SMI_REG96 0x96 // SmiTimer +#define FCH_SMI_REG98 0x98 // SmiTrig +#define FCH_SMI_REG9C 0x9C // SmiTrig +#define FCH_SMI_REGA0 0xA0 +#define FCH_SMI_REGA1 0xA1 +#define FCH_SMI_REGA2 0xA2 +#define FCH_SMI_REGA3 0xA3 +#define FCH_SMI_REGA4 0xA4 +#define FCH_SMI_REGA5 0xA5 +#define FCH_SMI_REGA6 0xA6 +#define FCH_SMI_REGA7 0xA7 +#define FCH_SMI_REGA8 0xA8 +#define FCH_SMI_REGA9 0xA9 +#define FCH_SMI_REGAA 0xAA +#define FCH_SMI_REGAB 0xAB +#define FCH_SMI_REGAC 0xAC +#define FCH_SMI_REGAD 0xAD +#define FCH_SMI_REGAE 0xAE +#define FCH_SMI_REGAF 0xAF +#define FCH_SMI_REGB0 0xB0 +#define FCH_SMI_REGB1 0xB1 +#define FCH_SMI_REGB2 0xB2 +#define FCH_SMI_REGB3 0xB3 +#define FCH_SMI_REGB4 0xB4 +#define FCH_SMI_REGB5 0xB5 +#define FCH_SMI_REGB6 0xB6 +#define FCH_SMI_REGB7 0xB7 +#define FCH_SMI_REGB8 0xB8 +#define FCH_SMI_REGB9 0xB9 +#define FCH_SMI_REGBA 0xBA +#define FCH_SMI_REGBB 0xBB +#define FCH_SMI_REGBC 0xBC +#define FCH_SMI_REGBD 0xBD +#define FCH_SMI_REGBE 0xBE +#define FCH_SMI_REGBF 0xBF +#define FCH_SMI_REGC0 0xC0 +#define FCH_SMI_REGC1 0xC1 +#define FCH_SMI_REGC2 0xC2 +#define FCH_SMI_REGC3 0xC3 +#define FCH_SMI_REGC4 0xC4 +#define FCH_SMI_REGC5 0xC5 +#define FCH_SMI_REGC6 0xC6 +#define FCH_SMI_REGC7 0xC7 +#define FCH_SMI_REGC8 0xC8 +#define FCH_SMI_REGCA 0xCA // IoTrapping1 +#define FCH_SMI_REGCC 0xCC // IoTrapping2 +#define FCH_SMI_REGCE 0xCE // IoTrapping3 +#define FCH_SMI_TRAPPING_WRITE 0x01 +#define FCH_SMI_REGD0 0xD0 // MemTrapping0 +#define FCH_SMI_REGD4 0xD4 // MemRdOvrData0 +#define FCH_SMI_REGD8 0xD8 // MemTrapping1 +#define FCH_SMI_REGDC 0xDC // MemRdOvrData1 +#define FCH_SMI_REGE0 0xE0 // MemTrapping2 +#define FCH_SMI_REGE4 0xE4 // MemRdOvrData2 +#define FCH_SMI_REGE8 0xE8 // MemTrapping3 +#define FCH_SMI_REGEC 0xEC // MemRdOvrData3 +#define FCH_SMI_REGF0 0xF0 // CfgTrapping0 +#define FCH_SMI_REGF4 0xF4 // CfgTrapping1 +#define FCH_SMI_REGF8 0xF8 // CfgTrapping2 +#define FCH_SMI_REGFC 0xFC // CfgTrapping3 + +// +// FCH MMIO Base (PMIO) +// offset : 0x300 +// +#define FCH_PMIOA_REG00 0x00 // ISA Decode +#define FCH_PMIOA_REG04 0x04 // ISA Control +#define FCH_PMIOA_REG08 0x08 // PCI Control +#define FCH_PMIOA_REG0C 0x0C // StpClkSmaf +#define FCH_PMIOA_REG10 0x10 // RetryDetect +#define FCH_PMIOA_REG14 0x14 // StuckDetect +#define FCH_PMIOA_REG20 0x20 // BiosRamEn +#define FCH_PMIOA_REG24 0x24 // AcpiMmioEn +#define FCH_PMIOA_REG28 0x28 // AsfEn +#define FCH_PMIOA_REG2C 0x2C // Smbus0En +#define FCH_PMIOA_REG2E 0x2E // Smbus0Sel +#define FCH_PMIOA_REG34 0x34 // IoApicEn +#define FCH_PMIOA_REG3C 0x3C // SmartVoltEn +#define FCH_PMIOA_REG40 0x40 // SmartVolt2En +#define FCH_PMIOA_REG44 0x44 // BootTimerEn +#define FCH_PMIOA_REG48 0x48 // WatchDogTimerEn +#define FCH_PMIOA_REG4C 0x4C // WatchDogTimerConfig +#define FCH_PMIOA_REG50 0x50 // HPETEn +#define FCH_PMIOA_REG54 0x54 // SerialIrqConfig +#define FCH_PMIOA_REG56 0x56 // RtcControl +#define FCH_PMIOA_REG58 0x58 // VRT_T1 +#define FCH_PMIOA_REG59 0x59 // VRT_T2 +#define FCH_PMIOA_REG5A 0x5A // IntruderControl +#define FCH_PMIOA_REG5B 0x5B // RtcShadow +#define FCH_PMIOA_REG5C 0x5C +#define FCH_PMIOA_REG5D 0x5D +#define FCH_PMIOA_REG5E 0x5E // RtcExtIndex +#define FCH_PMIOA_REG5F 0x5F // RtcExtData +#define FCH_PMIOA_REG60 0x60 // AcpiPm1EvtBlk +#define FCH_PMIOA_REG62 0x62 // AcpiPm1CntBlk +#define FCH_PMIOA_REG64 0x64 // AcpiPmTmrBlk +#define FCH_PMIOA_REG66 0x66 // P_CNTBlk +#define FCH_PMIOA_REG68 0x68 // AcpiGpe0Blk +#define FCH_PMIOA_REG6A 0x6A // AcpiSmiCmd +#define FCH_PMIOA_REG6C 0x6C // AcpiPm2CntBlk +#define FCH_PMIOA_REG6E 0x6E // AcpiPmaCntBlk +#define FCH_PMIOA_REG74 0x74 // AcpiConfig +#define FCH_PMIOA_REG78 0x78 // WakeIoAddr +#define FCH_PMIOA_REG7A 0x7A // HaltCountEn +#define FCH_PMIOA_REG7C 0x7C // C1eWrPortAdr +#define FCH_PMIOA_REG7E 0x7E // CStateEn +#define FCH_PMIOA_REG7F 0x7F // CStateEn +#define FCH_PMIOA_REG80 0x80 // BreakEvent +#define FCH_PMIOA_REG84 0x84 // AutoArbEn +#define FCH_PMIOA_REG88 0x88 // CStateControl +#define FCH_PMIOA_REG89 0x89 // +#define FCH_PMIOA_REG8C 0x8C // StpClkHoldTime +#define FCH_PMIOA_REG8E 0x8E // PopUpEndTime +#define FCH_PMIOA_REG90 0x90 // C4Control +#define FCH_PMIOA_REG94 0x94 // CStateTiming0 +#define FCH_PMIOA_REG96 0x96 // +#define FCH_PMIOA_REG97 0x97 // +#define FCH_PMIOA_REG98 0x98 // CStateTiming1 +#define FCH_PMIOA_REG99 0x99 // +#define FCH_PMIOA_REG9B 0x9B // +#define FCH_PMIOA_REG9C 0x9C // C2Count +#define FCH_PMIOA_REG9D 0x9D // C3Count +#define FCH_PMIOA_REG9E 0x9E // C4Count +#define FCH_PMIOA_REGA0 0xA0 // MessageCState +#define FCH_PMIOA_REGA4 0xA4 // +#define FCH_PMIOA_REGA8 0xA8 // TrafficMonitorIdleTime +#define FCH_PMIOA_REGAA 0xAA // TrafficMonitorIntTime +#define FCH_PMIOA_REGAC 0xAC // TrafficMonitorTrafficCount +#define FCH_PMIOA_REGAE 0xAE // TrafficMonitorIntrCount +#define FCH_PMIOA_REGB0 0xB0 // TrafficMonitorTimeTick +#define FCH_PMIOA_REGB4 0xB4 // FidVidControl +#define FCH_PMIOA_REGB6 0xB6 // TPRESET1 +#define FCH_PMIOA_REGB7 0xB7 // Tpreset1b +#define FCH_PMIOA_REGB8 0xB8 // TPRESET2 +#define FCH_PMIOA_REGB9 0xB9 // Test0 +#define FCH_PMIOA_REGBA 0xBA // S_StateControl +#define FCH_PMIOA_REGBB 0xBB // +#define FCH_PMIOA_REGBC 0xBC // ThrottlingControl +#define FCH_PMIOA_REGBE 0xBE // ResetControl +#define FCH_PMIOA_REGBF 0xBF // ResetControl +#define FCH_PMIOA_REGC0 0xC0 // S5Status +#define FCH_PMIOA_REGC2 0xC2 // ResetStatus +#define FCH_PMIOA_REGC4 0xC4 // ResetCommand +#define FCH_PMIOA_REGC5 0xC5 // CF9Shadow +#define FCH_PMIOA_REGC6 0xC6 // HTControl +#define FCH_PMIOA_REGC8 0xC8 // Misc +#define FCH_PMIOA_REGCC 0xCC // IoDrvSth +#define FCH_PMIOA_REGD0 0xD0 // CLKRunEn +#define FCH_PMIOA_REGD2 0xD2 // PmioDebug +#define FCH_PMIOA_REGD3 0xD3 // SD +#define FCH_PMIOA_REGD6 0xD6 // IMCGating +#define FCH_PMIOA_REGD7 0xD7 // +#define FCH_PMIOA_REGD8 0xD8 // MiscIndex +#define FCH_PMIOA_REGD9 0xD9 // MiscData +#define FCH_PMIOA_REGDA 0xDA // SataConfig +#define FCH_PMIOA_REGDC 0xDC // HyperFlashConfig +#define FCH_PMIOA_REGDE 0xDE // ABConfig +#define FCH_PMIOA_REGE0 0xE0 // ABRegBar +#define FCH_PMIOA_REGE4 0xE4 +#define FCH_PMIOA_REGE6 0xE6 // FcEn +#define FCH_PMIOA_REGE7 0xE7 +#define FCH_PMIOA_REGE8 0xE8 +#define FCH_PMIOA_REGEA 0xEA // PcibConfig +#define FCH_PMIOA_REGEB 0xEB // AzEn +#define FCH_PMIOA_REGEC 0xEC // LpcGating +#define FCH_PMIOA_REGED 0xED // UsbGating +#define FCH_PMIOA_REGEE 0xEE // UsbCntrl +#define FCH_PMIOA_REGEF 0xEF // UsbEnable +#define FCH_PMIOA_REGF0 0xF0 // UsbControl +#define FCH_PMIOA_REGF2 0xF2 // UsbControl2 +#define FCH_PMIOA_REGF3 0xF3 // UsbDebug +#define FCH_PMIOA_REGF4 0xF4 // UsbDebug +#define FCH_PMIOA_REGF6 0xF6 // GecEn +#define FCH_PMIOA_REGF8 0xF8 // GecConfig +#define FCH_PMIOA_REGFC 0xFC // TraceMemoryEn + +// +// FCH MMIO Base (PMIO2) +// offset : 0x400 +// +#define FCH_PMIO2_REG00 0x00 // Fan0InputControl +#define FCH_PMIO2_REG01 0x01 // Fan0Control +#define FCH_PMIO2_REG02 0x02 // Fan0Freq +#define FCH_PMIO2_REG03 0x03 // LowDuty0 +#define FCH_PMIO2_REG04 0x04 // MidDuty0 + +#define FCH_PMIO2_REG10 0x00 // Fan1InputControl +#define FCH_PMIO2_REG11 0x01 // Fan1Control +#define FCH_PMIO2_REG12 0x02 // Fan1Freq +#define FCH_PMIO2_REG13 0x03 // LowDuty1 +#define FCH_PMIO2_REG14 0x04 // MidDuty1 + +#define FCH_PMIO2_REG63 0x63 // SampleFreqDiv +#define FCH_PMIO2_REG69 0x69 // Fan0 Speed +#define FCH_PMIO2_REG95 0x95 // Temperature +#define FCH_PMIO2_REGB8 0xB8 // Voltage +#define FCH_PMIO2_REGEA 0xEA // Hwm_Calibration + +#define FCH_PMIO2_REG92 0x92 // +#define FCH_PMIO2_REGF8 0xF8 // VoltageSamleSel +#define FCH_PMIO2_REGF9 0xF9 // TempSampleSel + +#define FCH_PMIO2_REG 0xFC // TraceMemoryEn + + +// +// FCH MMIO Base (GPIO/IoMux) +// offset : 0x100/0xD00 +// +/* +GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226. +*/ +#define FCH_GPIO_REG00 0x00 +#define FCH_GPIO_REG06 0x06 +#define FCH_GPIO_REG09 0x09 +#define FCH_GPIO_REG10 0x0A +#define FCH_GPIO_REG17 0x11 +#define FCH_GPIO_REG21 0x15 +#define FCH_GPIO_REG28 0x1C +#define FCH_GPIO_REG32 0x20 +#define FCH_GPIO_REG33 0x21 +#define FCH_GPIO_REG34 0x22 +#define FCH_GPIO_REG35 0x23 +#define FCH_GPIO_REG36 0x24 +#define FCH_GPIO_REG37 0x25 +#define FCH_GPIO_REG38 0x26 +#define FCH_GPIO_REG39 0x27 +#define FCH_GPIO_REG40 0x28 +#define FCH_GPIO_REG41 0x29 +#define FCH_GPIO_REG42 0x2A +#define FCH_GPIO_REG43 0x2B +#define FCH_GPIO_REG44 0x2C +#define FCH_GPIO_REG45 0x2D +#define FCH_GPIO_REG46 0x2E +#define FCH_GPIO_REG47 0x2F +#define FCH_GPIO_REG48 0x30 +#define FCH_GPIO_REG49 0x31 +#define FCH_GPIO_REG50 0x32 +#define FCH_GPIO_REG51 0x33 +#define FCH_GPIO_REG52 0x34 +#define FCH_GPIO_REG53 0x35 +#define FCH_GPIO_REG54 0x36 +#define FCH_GPIO_REG55 0x37 +#define FCH_GPIO_REG56 0x38 +#define FCH_GPIO_REG57 0x39 +#define FCH_GPIO_REG58 0x3A +#define FCH_GPIO_REG59 0x3B +#define FCH_GPIO_REG60 0x3C +#define FCH_GPIO_REG61 0x3D +#define FCH_GPIO_REG62 0x3E +#define FCH_GPIO_REG63 0x3F +#define FCH_GPIO_REG64 0x40 +#define FCH_GPIO_REG65 0x41 +#define FCH_GPIO_REG66 0x42 +#define FCH_GPIO_REG67 0x43 +#define FCH_GPIO_REG68 0x44 +#define FCH_GPIO_REG69 0x45 +#define FCH_GPIO_REG70 0x46 +#define FCH_GPIO_REG71 0x47 +#define FCH_GPIO_REG72 0x48 +#define FCH_GPIO_REG73 0x49 +#define FCH_GPIO_REG74 0x4A +#define FCH_GPIO_REG75 0x4B +#define FCH_GPIO_REG76 0x4C +#define FCH_GPIO_REG77 0x4D +#define FCH_GPIO_REG78 0x4E +#define FCH_GPIO_REG79 0x4F +#define FCH_GPIO_REG80 0x50 + +#define FCH_GEVENT_REG00 0x60 +#define FCH_GEVENT_REG01 0x61 +#define FCH_GEVENT_REG02 0x62 +#define FCH_GEVENT_REG03 0x63 +#define FCH_GEVENT_REG04 0x64 +#define FCH_GEVENT_REG05 0x65 +#define FCH_GEVENT_REG06 0x66 +#define FCH_GEVENT_REG07 0x67 +#define FCH_GEVENT_REG08 0x68 +#define FCH_GEVENT_REG09 0x69 +#define FCH_GEVENT_REG10 0x6A +#define FCH_GEVENT_REG11 0x6B +#define FCH_GEVENT_REG12 0x6C +#define FCH_GEVENT_REG13 0x6D +#define FCH_GEVENT_REG14 0x6E +#define FCH_GEVENT_REG15 0x6F +#define FCH_GEVENT_REG16 0x70 +#define FCH_GEVENT_REG17 0x71 +#define FCH_GEVENT_REG18 0x72 +#define FCH_GEVENT_REG19 0x73 +#define FCH_GEVENT_REG20 0x74 +#define FCH_GEVENT_REG21 0x75 +#define FCH_GEVENT_REG22 0x76 +#define FCH_GEVENT_REG23 0x77 +// S5-DOMAIN GPIO +#define FCH_GPIO_REG160 0xA0 +#define FCH_GPIO_REG161 0xA1 +#define FCH_GPIO_REG162 0xA2 +#define FCH_GPIO_REG163 0xA3 +#define FCH_GPIO_REG164 0xA4 +#define FCH_GPIO_REG165 0xA5 +#define FCH_GPIO_REG166 0xA6 +#define FCH_GPIO_REG167 0xA7 +#define FCH_GPIO_REG168 0xA8 +#define FCH_GPIO_REG169 0xA9 +#define FCH_GPIO_REG170 0xAA +#define FCH_GPIO_REG171 0xAB +#define FCH_GPIO_REG172 0xAC +#define FCH_GPIO_REG173 0xAD +#define FCH_GPIO_REG174 0xAE +#define FCH_GPIO_REG175 0xAF +#define FCH_GPIO_REG176 0xB0 +#define FCH_GPIO_REG177 0xB1 +#define FCH_GPIO_REG178 0xB2 +#define FCH_GPIO_REG179 0xB3 +#define FCH_GPIO_REG180 0xB4 +#define FCH_GPIO_REG181 0xB5 +#define FCH_GPIO_REG182 0xB6 +#define FCH_GPIO_REG183 0xB7 +#define FCH_GPIO_REG184 0xB8 +#define FCH_GPIO_REG185 0xB9 +#define FCH_GPIO_REG186 0xBA +#define FCH_GPIO_REG187 0xBB +#define FCH_GPIO_REG188 0xBC +#define FCH_GPIO_REG189 0xBD +#define FCH_GPIO_REG190 0xBE +#define FCH_GPIO_REG191 0xBF +#define FCH_GPIO_REG192 0xC0 +#define FCH_GPIO_REG193 0xC1 +#define FCH_GPIO_REG194 0xC2 +#define FCH_GPIO_REG195 0xC3 +#define FCH_GPIO_REG196 0xC4 +#define FCH_GPIO_REG197 0xC5 +#define FCH_GPIO_REG198 0xC6 +#define FCH_GPIO_REG199 0xC7 +#define FCH_GPIO_REG200 0xC8 +#define FCH_GPIO_REG201 0xC9 +#define FCH_GPIO_REG202 0xCA +#define FCH_GPIO_REG203 0xCB +#define FCH_GPIO_REG204 0xCC +#define FCH_GPIO_REG205 0xCD +#define FCH_GPIO_REG206 0xCE +#define FCH_GPIO_REG207 0xCF +#define FCH_GPIO_REG208 0xD0 +#define FCH_GPIO_REG209 0xD1 +#define FCH_GPIO_REG210 0xD2 +#define FCH_GPIO_REG211 0xD3 +#define FCH_GPIO_REG212 0xD4 +#define FCH_GPIO_REG213 0xD5 +#define FCH_GPIO_REG214 0xD6 +#define FCH_GPIO_REG215 0xD7 +#define FCH_GPIO_REG216 0xD8 +#define FCH_GPIO_REG217 0xD9 +#define FCH_GPIO_REG218 0xDA +#define FCH_GPIO_REG219 0xDB +#define FCH_GPIO_REG220 0xDC +#define FCH_GPIO_REG221 0xDD +#define FCH_GPIO_REG222 0xDE +#define FCH_GPIO_REG223 0xDF +#define FCH_GPIO_REG224 0xF0 +#define FCH_GPIO_REG225 0xF1 +#define FCH_GPIO_REG226 0xF2 +#define FCH_GPIO_REG227 0xF3 +#define FCH_GPIO_REG228 0xF4 + +// +// FCH MMIO Base (GPIO BANK0) +// offset : 0x1500 +// +#define FCH_GPIO_PULL_UP_ENABLE BIT4 +#define FCH_GPIO_PULL_DOWN_ENABLE BIT5 +#define FCH_GPIO_OUTPUT_VALUE BIT6 +#define FCH_GPIO_OUTPUT_ENABLE (1 << 7) + +#define FCH_GPIO_068_AZ_SDIN0_GPIO26 0x68 +#define FCH_GPIO_06C_AZ_SDIN1_GPIO27 0x6C +#define FCH_GPIO_070_AZ_SDIN2_GPIO28 0x70 +#define FCH_GPIO_074_AZ_SDIN3_GPIO29 0x74 + +#define FCH_GPIO_10C_GPIO55_AGPI067 0x10C +#define FCH_GPIO_118_GPIO59_AGPI070 0x118 + +// +// FCH MMIO Base (IoMux) +// offset : 0xD00 +// +#define FCH_IOMUX_1A_AZ_SDIN0_EGPIO26 0x1A +#define FCH_IOMUX_1B_AZ_SDIN1_EGPIO27 0x1B +#define FCH_IOMUX_1C_AZ_SDIN2_EGPIO28 0x1C +#define FCH_IOMUX_1D_AZ_SDIN3_EGPIO29 0x1D + +// +// FCH MMIO Base (SMBUS) +// offset : 0xA00 +// +#define FCH_SMBUS_REG12 0x12 // I2CbusConfig + +// +// FCH MMIO Base (MISC) +// offset : 0xE00 +// +#define FCH_MISC_REG00 0x00 // ClkCntrl0 +/* +FCH_MISC_REG00 EQU 000h + ClkCntrl0 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG04 0x04 // ClkCntrl1 +/* +FCH_MISC_REG04 EQU 004h + ClkCntrl1 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG08 0x08 // ClkCntrl2 +/* +FCH_MISC_REG08 EQU 008h + ClkCntrl2 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG0C 0x0C // ClkCntrl3 +/* +FCH_MISC_REG0C EQU 00Ch + ClkCntrl3 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG10 0x10 // ClkCntrl4 +/* +FCH_MISC_REG10 EQU 010h + ClkCntrl4 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG14 0x14 // ClkCntrl5 +/* +FCH_MISC_REG14 EQU 014h + ClkCntrl5 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG18 0x18 // ClkCntrl6 +/* +FCH_MISC_REG18 EQU 018h + ClkCntrl6 EQU 0FFFFFFFFh +*/ +#define FCH_MISC_REG1C 0x1C +#define FCH_MISC_REG30 0x30 // OscFreqCounter +/* +FCH_MISC_REG30 EQU 030h + OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second. +*/ +#define FCH_MISC_REG34 0x34 // HpetClkPeriod +/* +FCH_MISC_REG34 EQU 034h + HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M). +*/ +#define FCH_MISC_REG28 0x28 // ClkDrvSth2 +#define FCH_MISC_REG2C 0x2C +#define FCH_MISC_REG40 0x40 // MiscCntrl for clock only +#define FCH_MISC_REG41 0x41 // MiscCntr2 +#define FCH_MISC_REG42 0x42 // MiscCntr3 +#define FCH_MISC_REG44 0x44 // ValueOnPort80 +#define FCH_MISC_REG50 0x50 // +#define FCH_MISCx50_JTAG_CONTROL_ECO 0xFED80E50ul // +#define FCH_MISCx68_MEMORY_POWER_SAVING_CONTROL 0xFED80E68ul // + +#define FCH_MISC_REG6C 0x6C // EcoBit2 +/* +FCH_MISC_REG40 EQU 040h +*/ + +#define FCH_MISC_REG80 0x80 /**< FCH_MISC_REG80 + * @par + * StrapStatus [15.0] - FCH chip Strap Status + * @li <b>0001</b> - Not USED FWH + * @li <b>0002</b> - Not USED LPC ROM + * @li <b>0004</b> - EC enabled + * @li <b>0008</b> - Reserved + * @li <b>0010</b> - Internal Clock mode + */ +#define FCH_MISC_REGB6 0xB6 // + +#define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad +#define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1) + // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type. +#define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC) +#define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function +#define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock ** + +#define FCH_MISC_REG84 0x84 // StrapOverride +/* +FCH_MISC_REG84 EQU 084h + Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin. + Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin. + Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin. + Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin. + Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin. + Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin. + Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin. + Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin. + Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin. + Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin. + Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin + PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin + BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin + ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin. + BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin. + StrapOverrideEn EQU BIT31 ; Enable override strapping feature. +*/ +#define FCH_MISC_REGC0 0xC0 // CPU_Pstate0 +/* +FCH_MISC_REGC0 EQU 0C0h + Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core1_PState EQU BIT4+BIT5+BIT6 + Core2_PState EQU BIT8+BIT9+BIT10 + Core3_PState EQU BIT12+BIT13+BIT14 + Core4_PState EQU BIT16++BIT17+BIT18 + Core5_PState EQU BIT20+BIT21+BIT22 + Core6_PState EQU BIT24+BIT25+BIT26 + Core7_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGC4 0xC4 // CPU_Pstate1 +/* +FCH_MISC_REGC4 EQU 0C4h + Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 + Core9_PState EQU BIT4+BIT5+BIT6 + Core10_PState EQU BIT8+BIT9+BIT10 + Core11_PState EQU BIT12+BIT13+BIT14 + Core12_PState EQU BIT16++BIT17+BIT18 + Core13_PState EQU BIT20+BIT21+BIT22 + Core14_PState EQU BIT24+BIT25+BIT26 + Core15_PState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD0 0xD0 // CPU_Cstate0 +/* +FCH_MISC_REGD0 EQU 0D0h + Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core1_CState EQU BIT4+BIT5+BIT6 + Core2_CState EQU BIT8+BIT9+BIT10 + Core3_CState EQU BIT12+BIT13+BIT14 + Core4_CState EQU BIT16++BIT17+BIT18 + Core5_CState EQU BIT20+BIT21+BIT22 + Core6_CState EQU BIT24+BIT25+BIT26 + Core7_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGD4 0xD4 // CPU_Cstate1 +/* +FCH_MISC_REGD4 EQU 0D4h + Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 + Core9_CState EQU BIT4+BIT5+BIT6 + Core10_CState EQU BIT8+BIT9+BIT10 + Core11_CState EQU BIT12+BIT13+BIT14 + Core12_CState EQU BIT16++BIT17+BIT18 + Core13_CState EQU BIT20+BIT21+BIT22 + Core14_CState EQU BIT24+BIT25+BIT26 + Core15_CState EQU BIT28+BIT29+BIT30 +*/ +#define FCH_MISC_REGF0 0xF0 // SataPortSts +/* +FCH_MISC_REGF0 EQU 0F0h + Port0Sts EQU BIT0 ; The selected status of Port 0. + Port1Sts EQU BIT1 ; The selected status of Port 1 + Port2Sts EQU BIT2 ; The selected status of Port 2. + Port3Sts EQU BIT3 ; The selected status of Port 3 + Port4Sts EQU BIT4 ; The selected status of Port 4. + Port5Sts EQU BIT5 ; The selected status of Port 5 + SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5 + ; 01 - Select "delete" for Port 0 to 5 + ; 10 - Select "err" for Port 0 to 5 + ; 11 - Select "led" for Port 0 to 5 +*/ + +// +// FCH MMIO Base (SERIAL_DEBUG_BASE) +// offset : 0x1000 +// +#define FCH_SDB_REG00 0x00 // +#define FCH_SDB_REG74 0x74 + +#define FCH_RTC_REG00 0x00 // Seconds - RW +#define FCH_RTC_REG01 0x01 // Seconds Alarm - RW +#define FCH_RTC_REG02 0x02 // Minutes - RW +#define FCH_RTC_REG03 0x03 // Minutes Alarm - RW +#define FCH_RTC_REG04 0x04 // ours - RW +#define FCH_RTC_REG05 0x05 // ours Alarm- RW +#define FCH_RTC_REG06 0x06 // Day of Week - RW +#define FCH_RTC_REG07 0x07 // Date of Mont - RW +#define FCH_RTC_REG08 0x08 // Mont - RW +#define FCH_RTC_REG09 0x09 // Year - RW +#define FCH_RTC_REG0A 0x0A // Register A - RW +#define FCH_RTC_REG0B 0x0B // Register B - RW +#define FCH_RTC_REG0C 0x0C // Register C - R +#define FCH_RTC_REG0D 0x0D // DateAlarm - RW +#define FCH_RTC_REG32 0x32 // AltCentury - RW +#define FCH_RTC_REG48 0x48 // Century - RW +#define FCH_RTC_REG50 0x50 // Extended RAM Address Port - RW +#define FCH_RTC_REG53 0x53 // Extended RAM Data Port - RW +#define FCH_RTC_REG7E 0x7E // RTC Time Clear - RW +#define FCH_RTC_REG7F 0x7F // RTC RAM Enable - RW + +#define FCH_ECMOS_REG00 0x00 // scratch - reg +//;BIT0=0 AsicDebug is enabled +//;BIT1=0 SLT S3 runs +#define FCH_ECMOS_REG01 0x01 +#define FCH_ECMOS_REG02 0x02 +#define FCH_ECMOS_REG03 0x03 +#define FCH_ECMOS_REG04 0x04 +#define FCH_ECMOS_REG05 0x05 +#define FCH_ECMOS_REG06 0x06 +#define FCH_ECMOS_REG07 0x07 +#define FCH_ECMOS_REG08 0x08 // save 32BIT Physical address of Config structure +#define FCH_ECMOS_REG09 0x09 +#define FCH_ECMOS_REG0A 0x0A +#define FCH_ECMOS_REG0B 0x0B + +#define FCH_ECMOS_REG0C 0x0C //;save MODULE_ID +#define FCH_ECMOS_REG0D 0x0D //;Reserve for NB + +// +#define FCH_PMIOxC0_S5ResetStatus 0xFED803C0ul // S5ResetStatus +#define FCH_PMIOxC0_S5ResetStatus_ThermalTrip (1 << 0) +#define FCH_PMIOxC0_S5ResetStatus_FourSecondPwrBtn (1 << 1) +#define FCH_PMIOxC0_S5ResetStatus_All_Status (0x3ff | (1 << 20)) + +// +// FCH MISC Base (FCH_MISC_BASE) +// offset : 0x0E00 +// +#define FCH_MISCx50_JTAG_Control_ECO_bits 0xFED80E50ul // JTAG_Control_ECO_bits +#define FCH_MISCx50_JTAG_Control_ECO_bits_BIT12 (1 << 12) +#define FCH_MISCx50_JTAG_Control_ECO_bits_BIT16 (1 << 16) + +// FCH AOAC Base (FCH_AOAC_BASE) +// offset : 0x1E00 +// +#define FCH_AOACx94S013_CONTROL 0xFED81E94ul // +#define FCH_AOACx94S013_CONTROL_ARBITER_DIS (1 << 14) +#define FCH_AOACx94S013_CONTROL_INTERRUPT_DIS (1 << 15) + +#define FCH_IOMAP_REG00 0x000 // Dma_C 0 +#define FCH_IOMAP_REG02 0x002 // Dma_C 1 +#define FCH_IOMAP_REG04 0x004 // Dma_C 2 +#define FCH_IOMAP_REG06 0x006 // Dma_C 3 +#define FCH_IOMAP_REG08 0x008 // Dma_Status +#define FCH_IOMAP_REG09 0x009 // Dma_WriteRest +#define FCH_IOMAP_REG0A 0x00A // Dma_WriteMask +#define FCH_IOMAP_REG0B 0x00B // Dma_WriteMode +#define FCH_IOMAP_REG0C 0x00C // Dma_Clear +#define FCH_IOMAP_REG0D 0x00D // Dma_MasterClr +#define FCH_IOMAP_REG0E 0x00E // Dma_ClrMask +#define FCH_IOMAP_REG0F 0x00F // Dma_AllMask +#define FCH_IOMAP_REG20 0x020 // IntrCntrlReg1 +#define FCH_IOMAP_REG21 0x021 // IntrCntrlReg2 +#define FCH_IOMAP_REG40 0x040 // TimerC0 +#define FCH_IOMAP_REG41 0x041 // TimerC1 +#define FCH_IOMAP_REG42 0x042 // TimerC2 +#define FCH_IOMAP_REG43 0x043 // Tmr1CntrlWord +#define FCH_IOMAP_REG61 0x061 // Nmi_Status +#define FCH_IOMAP_REG70 0x070 // Nmi_Enable +#define FCH_IOMAP_REG71 0x071 // RtcDataPort +#define FCH_IOMAP_REG72 0x072 // AlternatRtcAddrPort +#define FCH_IOMAP_REG73 0x073 // AlternatRtcDataPort +#define FCH_IOMAP_REG80 0x080 // Dma_Page_Reserved0 +#define FCH_IOMAP_REG81 0x081 // Dma_PageC2 +#define FCH_IOMAP_REG82 0x082 // Dma_PageC3 +#define FCH_IOMAP_REG83 0x083 // Dma_PageC1 +#define FCH_IOMAP_REG84 0x084 // Dma_Page_Reserved1 +#define FCH_IOMAP_REG85 0x085 // Dma_Page_Reserved2 +#define FCH_IOMAP_REG86 0x086 // Dma_Page_Reserved3 +#define FCH_IOMAP_REG87 0x087 // Dma_PageC0 +#define FCH_IOMAP_REG88 0x088 // Dma_Page_Reserved4 +#define FCH_IOMAP_REG89 0x089 // Dma_PageC6 +#define FCH_IOMAP_REG8A 0x08A // Dma_PageC7 +#define FCH_IOMAP_REG8B 0x08B // Dma_PageC5 +#define FCH_IOMAP_REG8C 0x08C // Dma_Page_Reserved5 +#define FCH_IOMAP_REG8D 0x08D // Dma_Page_Reserved6 +#define FCH_IOMAP_REG8E 0x08E // Dma_Page_Reserved7 +#define FCH_IOMAP_REG8F 0x08F // Dma_Refres +#define FCH_IOMAP_REG92 0x092 // FastInit +#define FCH_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1 +#define FCH_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2 +#define FCH_IOMAP_REGC0 0x0C0 // Dma2_C4Addr +#define FCH_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt +#define FCH_IOMAP_REGC4 0x0C4 // Dma2_C5Addr +#define FCH_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt +#define FCH_IOMAP_REGC8 0x0C8 // Dma2_C6Addr +#define FCH_IOMAP_REGCA 0x0CA // Dma2_C6Cnt +#define FCH_IOMAP_REGCC 0x0CC // Dma2_C7Addr +#define FCH_IOMAP_REGCE 0x0CE // Dma2_C7Cnt +#define FCH_IOMAP_REGD0 0x0D0 // Dma_Status +#define FCH_IOMAP_REGD2 0x0D2 // Dma_WriteRest +#define FCH_IOMAP_REGD4 0x0D4 // Dma_WriteMask +#define FCH_IOMAP_REGD6 0x0D6 // Dma_WriteMode +#define FCH_IOMAP_REGD8 0x0D8 // Dma_Clear +#define FCH_IOMAP_REGDA 0x0DA // Dma_Clear +#define FCH_IOMAP_REGDC 0x0DC // Dma_ClrMask +#define FCH_IOMAP_REGDE 0x0DE // Dma_ClrMask +#define FCH_IOMAP_REGED 0x0ED // DUMMY IO PORT +#define FCH_IOMAP_REGF0 0x0F0 // NCP_Error +#define FCH_IOMAP_REG40B 0x040B // DMA1_Extend +#define FCH_IOMAP_REG4D0 0x04D0 // IntrEdgeControl +#define FCH_IOMAP_REG4D6 0x04D6 // DMA2_Extend +#define FCH_IOMAP_REGC00 0x0C00 // Pci_Intr_Index +#define FCH_IOMAP_REGC01 0x0C01 // Pci_Intr_Data +#define FCH_IOMAP_REGC14 0x0C14 // Pci_Error +#define FCH_IOMAP_REGC50 0x0C50 // CMIndex +#define FCH_IOMAP_REGC51 0x0C51 // CMData +#define FCH_IOMAP_REGC52 0x0C52 // GpmPort +#define FCH_IOMAP_REGC6F 0x0C6F // Isa_Misc +#define FCH_IOMAP_REGCD0 0x0CD0 // PMio2_Index +#define FCH_IOMAP_REGCD1 0x0CD1 // PMio2_Data +#define FCH_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index +#define FCH_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data +#define FCH_IOMAP_REGCD6 0x0CD6 // PM_Index +#define FCH_IOMAP_REGCD7 0x0CD7 // PM_Data +#define FCH_IOMAP_REGCF9 0x0CF9 // CF9Rst reg + +#define FCH_IRQ_INTA 0x00 // INTA# +#define FCH_IRQ_INTB 0x01 // INTB# +#define FCH_IRQ_INTC 0x02 // INTC# +#define FCH_IRQ_INTD 0x03 // INTD# +#define FCH_IRQ_INTE 0x04 // INTE# +#define FCH_IRQ_INTF 0x05 // INTF# +#define FCH_IRQ_INTG 0x06 // INTG# +#define FCH_IRQ_INTH 0x07 // INTH# +#define FCH_IRQ_SCI 0x10 // SCI +#define FCH_IRQ_SMBUS0 0x11 // SMBUS0 +#define FCH_IRQ_ASF 0x12 // ASF +#define FCH_IRQ_HDAUDIO 0x13 // HD Audio +#define FCH_IRQ_FC 0x14 // FC +#define FCH_IRQ_GEC 0x15 // GEC +#define FCH_IRQ_SD 0x17 // SD +#define FCH_IRQ_IMCINT0 0x20 // IMC INT0 +#define FCH_IRQ_IMCINT1 0x21 // IMC INT1 +#define FCH_IRQ_IMCINT2 0x22 // IMC INT2 +#define FCH_IRQ_IMCINT3 0x23 // IMC INT3 +#define FCH_IRQ_IMCINT4 0x24 // IMC INT4 +#define FCH_IRQ_IMCINT5 0x25 // IMC INT5 +#define FCH_IRQ_USB18INTA 0x30 // Dev 18 (USB) INTA# +#define FCH_IRQ_USB18INTB 0x31 // Dev 18 (USB) INTB# +#define FCH_IRQ_USB19INTA 0x32 // Dev 19 (USB) INTA# +#define FCH_IRQ_USB19INTB 0x33 // Dev 19 (USB) INTB# +#define FCH_IRQ_USB22INTA 0x34 // Dev 22 (USB) INTA# +#define FCH_IRQ_USB22INTB 0x35 // Dev 22 (USB) INTB# +#define FCH_IRQ_USB20INTC 0x36 // Dev 20 (USB) INTC# +#define FCH_IRQ_IDE 0x40 // IDE pci interrupt +#define FCH_IRQ_SATA 0x41 // SATA pci interrupt +#define FCH_IRQ_GPPINT0 0x50 // Gpp Int0 +#define FCH_IRQ_GPPINT1 0x51 // Gpp Int1 +#define FCH_IRQ_GPPINT2 0x52 // Gpp Int2 +#define FCH_IRQ_GPPINT3 0x53 // Gpp Int3 +#define FCH_IRQ_GPIO 0x62 // GPIO Controller +#define FCH_IRQ_IOAPIC 0x80 // Select IRQ routing to IoApic mode +#define FCH_IRQ_PIC 0x00 // Select IRQ routing to PIC mode + +#define FCH_SPI_MMIO_REG00 0x00 //SPI_ +#define FCH_SPI_OPCODE 0x000000FFl // +#define FCH_SPI_TX_COUNT 0x00000F00l // +#define FCH_SPI_RX_COUNT 0x0000F000l // +#define FCH_SPI_EXEC_OPCODE 0x00010000l // +#define FCH_SPI_FIFO_PTR_CRL 0x00100000l // +#define FCH_SPI_FIFO_PTR_INC 0x00200000l // +#define FCH_SPI_BUSY 0x80000000l // +#define FCH_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register +#define FCH_SPI_PARAMETER 0x000000FFl // +#define FCH_SPI_FIFO_PTR 0x00000700l // +#define FCH_SPI_BYTE_PROGRAM 0xFF000000l // +#define FCH_SPI_MMIO_REG1C 0x1C // +#define FCH_SPI_RETRY_TIMES 0x3 // + +#define FCH_SPI_MMIO_REG1D 0x1D // +#define FCH_SPI_MMIO_REG1E 0x1E // +#define FCH_SPI_MMIO_REG1F 0x1F // +#define FCH_SPI_MMIO_REG4E 0x4E // + +#define FCH_SPI_MMIO_REG1F_X05_TX_BYTE_COUNT 0x05 // +#define FCH_SPI_MMIO_REG1F_X06_RX_BYTE_COUNT 0x06 // + +#define FCH_SPI_MMIO_REG20 0x20 // +#define FCH_SPI_MMIO_REG22 0x22 // +#define FCH_SPI_MMIO_REG2C 0x2C // +#define FCH_SPI_MMIO_REG38 0x38 // +#define FCH_SPI_MMIO_REG3C 0x3C // + +#define FCH_SPI_MMIO_REG45_CMDCODE 0x45 // +#define FCH_SPI_MMIO_REG47_CMDTRIGGER 0x47 // +#define FCH_SPI_MMIO_REG48_TXBYTECOUNT 0x48 // +#define FCH_SPI_MMIO_REG4B_RXBYTECOUNT 0x4B // +#define FCH_SPI_MMIO_REG4C_SPISTATUS 0x4C // +#define FCH_SPI_MMIO_REG80_FIFO 0x80 // + +#define FCH_SPI_MODE_FAST 0x7 // +#define FCH_SPI_MODE_NORMAL 0x6 // +#define FCH_SPI_MODE_QUAL_144 0x5 // +#define FCH_SPI_MODE_QUAL_122 0x4 // +#define FCH_SPI_MODE_QUAL_114 0x3 // +#define FCH_SPI_MODE_QUAL_112 0x2 // + +#define FCH_SPI_DEVICE_MODE_DIS 0x7 // +#define FCH_SPI_DEVICE_MODE_144 0x4 // +#define FCH_SPI_DEVICE_MODE_114 0x3 // +#define FCH_SPI_DEVICE_MODE_122 0x2 // +#define FCH_SPI_DEVICE_MODE_112 0x1 // +#define FCH_SPI_DEVICE_MODE_FAST 0x0 // + +#define FCH_SPI_SPEED_16M 0x4 // +#define FCH_SPI_SPEED_22M 0x3 // +#define FCH_SPI_SPEED_33M 0x2 // +#define FCH_SPI_SPEED_66M 0x1 // +#define FCH_SPI_SPEED_100M 0x5 // + +#define AMD_NB_REG78 0x78 +#define AMD_NB_SCRATCH AMD_NB_REG78 +#define MailBoxPort 0x3E + +#define MAX_LT_POLLINGS 0x4000 +#define SMI_TIMER_ENABLE BIT15 + + +#define ACPIMMIO32(x) (*(volatile UINT32*)(UINTN)(x)) +#define ACPIMMIO16(x) (*(volatile UINT16*)(UINTN)(x)) +#define ACPIMMIO8(x) (*(volatile UINT8*)(UINTN)(x)) + +#define U3PLL_LOCK BIT7 +#define U3PLL_RESET BIT8 +#define U3PHY_RESET BIT9 +#define U3CORE_RESET BIT10 +#define XHC0_FUNC_RESET BIT11 +#define XHC1_FUNC_RESET BIT12 + +#define XHCI_ACPI_MMIO_AMD_REG00 0x00 +#define XHCI_ACPI_MMIO_AMD_REG04 0x04 +#define XHCI_ACPI_MMIO_AMD_REG08 0x08 +#define XHCI_ACPI_MMIO_AMD_REG10 0x10 +#define XHCI_ACPI_MMIO_AMD_REG14 0x14 +#define XHCI_ACPI_MMIO_AMD_REG20 0x20 +#define XHCI_ACPI_MMIO_AMD_REG24 0x24 +#define XHCI_ACPI_MMIO_AMD_REG28 0x28 +#define XHCI_ACPI_MMIO_AMD_REG30 0x30 +#define XHCI_ACPI_MMIO_AMD_REG40 0x40 +#define XHCI_ACPI_MMIO_AMD_REG48 0x48 // USB3.0_Ind_REG Index +#define XHCI_ACPI_MMIO_AMD_REG4C 0x4C // USB2.0_Ind_REG Data +#define XHCI_ACPI_MMIO_AMD_REG8C 0x8C +#define XHCI_ACPI_MMIO_AMD_REG90 0x90 // adaptation timer settings +#define XHCI_ACPI_MMIO_AMD_REG98 0x98 +#define XHCI_ACPI_MMIO_AMD_REGA0 0xA0 // BAR 0 +#define XHCI_ACPI_MMIO_AMD_REGA4 0xA4 // BAR 1 +#define XHCI_ACPI_MMIO_AMD_REGA8 0xA8 // BAR 2 +#define XHCI_ACPI_MMIO_AMD_REGB0 0xB0 // SPI_Valid_Base. +#define XHCI_ACPI_MMIO_AMD_REGC0 0xC0 // Firmware starting offset for coping +#define XHCI_ACPI_MMIO_AMD_REGB4 0xB4 +#define XHCI_ACPI_MMIO_AMD_REGD0 0xD0 + +#define FCH_XHCI_REG48 0x48 // XHCI IND_REG Index registers +#define FCH_XHCI_REG4C 0x4C // XHCI IND_REG Data registers + +#define FCH_XHCI_IND60_BASE 0x40000000ul // + +#define FCH_XHCI_IND60_REG00 FCH_XHCI_IND60_BASE + 0x00 // +#define FCH_XHCI_IND60_REG04 FCH_XHCI_IND60_BASE + 0x04 // +#define FCH_XHCI_IND60_REG08 FCH_XHCI_IND60_BASE + 0x08 // +#define FCH_XHCI_IND60_REG0C FCH_XHCI_IND60_BASE + 0x0C // +#define FCH_XHCI_IND60_REG18 FCH_XHCI_IND60_BASE + 0x18 // +#define FCH_XHCI_IND60_REG48 FCH_XHCI_IND60_BASE + 0x48 // +#define FCH_XHCI_IND60_REG50 FCH_XHCI_IND60_BASE + 0x50 // +#define FCH_XHCI_IND60_REG54 FCH_XHCI_IND60_BASE + 0x54 // + +#define FCH_XHCI_IND_REG00 0x00 // +#define FCH_XHCI_IND_REG04 0x04 // +#define FCH_XHCI_IND_REG48 0x48 // +#define FCH_XHCI_IND_REG54 0x54 // +#define FCH_XHCI_IND_REG88 0x88 // +#define FCH_XHCI_IND_REG94 0x94 // adaptation mode settings +#define FCH_XHCI_IND_REG98 0x98 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REGC8 0xC8 // +#define FCH_XHCI_IND_REGD4 0xD4 // adaptation mode settings +#define FCH_XHCI_IND_REGD8 0xD8 // CR phase and frequency filter settings +#define FCH_XHCI_IND_REG100 0x100 // +#define FCH_XHCI_IND_REG120 0x120 // +#define FCH_XHCI_IND_REG128 0x128 // +#define MAX_XHCI_PORTS 0x04 + +//SMBUS +#define FCH_SMB_IOREG00 0x00 // SMBusStatus +#define FCH_SMB_IOREG01 0x01 // SMBusSlaveStatus +#define FCH_SMB_IOREG02 0x02 // SMBusControl +#define FCH_SMB_IOREG03 0x03 // SMBusHostCmd +#define FCH_SMB_IOREG04 0x04 // SMBusAddress +#define FCH_SMB_IOREG05 0x05 // SMBusData0 +#define FCH_SMB_IOREG06 0x06 // SMBusData1 +#define FCH_SMB_IOREG07 0x07 // SMBusBlockData +#define FCH_SMB_IOREG08 0x08 // SMBusSlaveControl +#define FCH_SMB_IOREG14 0x14 // SMBusAutoPoll +#define FCH_SMB_IOREG16 0x16 // SMBusPausePoll +#define FCH_SMB_IOREG17 0x17 // SMBusHostCmd2 + +#define FCH_SMB_CMD_QUICK 0x00 << 2 // Quick Read or Write +#define FCH_SMB_CMD_BYTE 0x01 << 2 // Byte Read or Write +#define FCH_SMB_CMD_BYTE_DATA 0x02 << 2 // Byte Data Read or Write +#define FCH_SMB_CMD_WORD_DATA 0x03 << 2 // Word Data Read or Write +#define FCH_SMB_CMD_BLOCK 0x05 << 2 // Block Read or Write + +#define FCH_SMB_ALL_HOST_STATUS 0x1f // HostBusy+SMBInterrupt+DeviceErr+BusCollision+Failed +#define FCH_SMB_CMD_BYTE_DATA_START 0x48 // Byte Data Read or Write +#define FCH_SMB_CMD_START BIT6 +#define FCH_SMB_READ_ENABLE BIT0 +#define FCH_SMB_AUTO_POLL_EN BIT0 +#define FCH_SMB_POLL2BYTE BIT7 + +#define SBTSI_ADDR 0x98 +#define SBTSI_REG01 0x01 +#define SBTSI_REG09 0x09 +#define SBTSI_REG10 0x10 +#define SBTSI_READORDER BIT5 + +#define FCH_EC_ENTER_CONFIG 0X5A +#define FCH_EC_EXIT_CONFIG 0XA5 +#define FCH_EC_REG07 0X07 +#define FCH_EC_REG30 0X30 +#define FCH_EC_REG60 0X60 +#define FCH_EC_REG61 0X61 + +#define FCH_IMC_ROMSIG 0x55aa55aaul + +#define SPI_HEAD_LENGTH 0x0E +#define SPI_BAR0_VLD 0x01 +#define SPI_BASE0 (0x00 << 7) +#define SPI_BAR1_VLD (0x01 << 8) +#define SPI_BASE1 (SPI_HEAD_LENGTH << 10) +#define SPI_BAR2_VLD (0x01 << 16) +#define SPI_BASE2(x) ((SPI_HEAD_LENGTH + ACPIMMIO16(x)) << 18) + +#define FW_TO_SIGADDR_OFFSET 0x0C +#define BCD_ADDR_OFFSET 0x02 +#define BCD_SIZE_OFFSET 0x04 +#define FW_ADDR_OFFSET 0x06 +#define FW_SIZE_OFFSET 0x08 +#define ACD_ADDR_OFFSET 0x0A +#define ACD_SIZE_OFFSET 0x0C +#define XHC_BOOT_RAM_SIZE 0x8000 + +#define PKT_DATA_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x00 +#define PKT_LEN_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x14 +#define PKT_CTRL_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x15 +#define EFUS_DAC_ADJUSTMENT_CONTROL 0x850A8ul +#define BGADJ 0x1F +#define DACADJ 0x1B +#define EFUS_DAC_ADJUSTMENT_CONTROL_DATA (BGADJ + (DACADJ << 8) + BIT16 ) + +#define KABINI_OSC_OUT_CLOCK_SEL_48MHz 0x02 +#define KABINI_OSC_OUT_CLOCK_SEL_25MHz 0x01 + +#define RTC_WORKAROUND_SECOND 0x00 +#define RTC_VALID_SECOND_VALUE 0x59 +#define RTC_SECOND_RESET_VALUE 0x30 +#define RTC_SECOND_LOWER_NIBBLE 0x0F +#define RTC_VALID_SECOND_VALUE_LN 0x09 + +#ifndef FCH_DEADLOOP + #define FCH_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } +#endif + +#define OHCI_ARB_REGQ_VLD_EN BIT2 + +#define HCEx40_Control 0xFED80040ul +#define HCEx44_Input 0xFED80044ul +#define HCEx48_Output 0xFED80048ul +#define HCEx4C_Status 0xFED8004Cul +#define HCEx50_IntrEn 0xFED80050ul +#define EmulationSmiEn BIT4 + +#define FCH_PMx08_PciControl 0xFED80308ul // PCI Control +#define FCH_PMx08_PciControl_ShutDownOption BIT20 + diff --git a/src/vendorcode/amd/pi/00730F01/Proc/Fch/FchPlatform.h b/src/vendorcode/amd/pi/00730F01/Proc/Fch/FchPlatform.h new file mode 100644 index 0000000000..38c4e7e20b --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/Proc/Fch/FchPlatform.h @@ -0,0 +1,118 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH platform definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 281178 $ @e \$Date: 2013-12-18 02:14:15 -0600 (Wed, 18 Dec 2013) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _FCH_PLATFORM_H_ +#define _FCH_PLATFORM_H_ + +#define MAX_SATA_PORTS 8 + +#include "AGESA.h" + +#ifndef FCHOEM_ACPI_RESTORE_SWSMI + #define FCHOEM_BEFORE_PCI_RESTORE_SWSMI 0xD3 + #define FCHOEM_AFTER_PCI_RESTORE_SWSMI 0xD4 + #define FCHOEM_ENABLE_ACPI_SWSMI 0xA0 + #define FCHOEM_DISABLE_ACPI_SWSMI 0xA1 + #define FCHOEM_START_TIMER_SMI 0xBC + #define FCHOEM_STOP_TIMER_SMI 0xBD +#endif + +#ifndef FCHOEM_SPI_UNLOCK_SWSMI + #define FCHOEM_SPI_UNLOCK_SWSMI 0xAA +#endif +#ifndef FCHOEM_SPI_LOCK_SWSMI + #define FCHOEM_SPI_LOCK_SWSMI 0xAB +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_LOW + #define FCHOEM_ACPI_TABLE_RANGE_LOW 0xE0000ul +#endif + +#ifndef FCHOEM_ACPI_TABLE_RANGE_HIGH + #define FCHOEM_ACPI_TABLE_RANGE_HIGH 0xFFFF0ul +#endif + +#ifndef FCHOEM_ACPI_BYTE_CHECHSUM + #define FCHOEM_ACPI_BYTE_CHECHSUM 0x100 +#endif + +#ifndef FCHOEM_IO_DELAY_PORT + #define FCHOEM_IO_DELAY_PORT 0x80 +#endif + +#ifndef FCHOEM_OUTPUT_DEBUG_PORT + #define FCHOEM_OUTPUT_DEBUG_PORT 0x80 +#endif + +#define FCH_PCIRST_BASE_IO 0xCF9 +#define FCH_PCI_RESET_COMMAND06 0x06 +#define FCH_PCI_RESET_COMMAND0E 0x0E +#define FCH_KBDRST_BASE_IO 0x64 +#define FCH_KBC_RESET_COMMAND 0xFE +#define FCH_ROMSIG_BASE_IO 0x20000l +#define FCH_ROMSIG_SIGNATURE 0x55AA55AAul +#define FCH_MAX_TIMER 0xFFFFFFFFul +#define FCH_GEC_INTERNAL_REG 0x6804 +#define FCH_HPET_REG_MASK 0xFFFFF800ul +#define FCH_FAKE_USB_BAR_ADDRESS 0x58830000ul + + +#ifndef FCHOEM_ELAPSED_TIME_UNIT + #define FCHOEM_ELAPSED_TIME_UNIT 28 +#endif + +#ifndef FCHOEM_ELAPSED_TIME_DIVIDER + #define FCHOEM_ELAPSED_TIME_DIVIDER 100 +#endif + +#include "Fch.h" +#include "amdlib.h" +#include "FchCommonCfg.h" +#include "AcpiLib.h" +#include "FchDef.h" +#include "FchBiosRamUsage.h" +#include "AmdFch.h" + +extern BUILD_OPT_CFG UserOptions; + +#endif // _FCH_PLATFORM_H_ diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/AGESA.c b/src/vendorcode/amd/pi/00730F01/binaryPI/AGESA.c new file mode 100644 index 0000000000..b58107ca78 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/AGESA.c @@ -0,0 +1,691 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Agesa structures and definitions + * + * Contains AMD AGESA core interface + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Include + * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +// TODO This list needs to be pruned of anything that is not API +#include "AGESA.h" +#include <agesawrapper.h> +#include "FieldAccessors.h" +#include "AcpiLib.h" +#include "FchCommonCfg.h" +#include "Fch.h" +#include "FchDef.h" +#include "amdlib.h" + +// TODO These need to be replaced with calls to CreateStruct() +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ); + +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ); + +CONST UINT32 ImageSignature = IMAGE_SIGNATURE; +CONST UINT32 ModuleSignature = MODULE_SIGNATURE; +CONST CHAR8 ModuleIdentifier[] = AGESA_ID; + +/************************************************************************ + * + * AGESA Basic Level interface structure definition and function prototypes + * + ***********************************************************************/ + + +/********************************************************************** + * Interface call: AmdCreateStruct + **********************************************************************/ +AGESA_STATUS +AmdCreateStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_CREATE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdReleaseStruct + **********************************************************************/ +AGESA_STATUS +AmdReleaseStruct ( + IN OUT AMD_INTERFACE_PARAMS *InterfaceParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + InterfaceParams->StdHeader.Func = AMD_RELEASE_STRUCT; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdInitReset + **********************************************************************/ +AGESA_STATUS +AmdInitReset ( + IN OUT AMD_RESET_PARAMS *ResetParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResetParams->StdHeader.Func = AMD_INIT_RESET; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResetParams); +} + +/********************************************************************** + * Interface call: AmdInitEarly + **********************************************************************/ +AGESA_STATUS +AmdInitEarly ( + IN OUT AMD_EARLY_PARAMS *EarlyParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EarlyParams->StdHeader.Func = AMD_INIT_EARLY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EarlyParams); +} + +/********************************************************************** + * Interface call: AmdInitPost + **********************************************************************/ +AGESA_STATUS +AmdInitPost ( + IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + PostParams->StdHeader.Func = AMD_INIT_POST; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(PostParams); +} + +/********************************************************************** + * Interface call: AmdInitEnv + **********************************************************************/ +AGESA_STATUS +AmdInitEnv ( + IN OUT AMD_ENV_PARAMS *EnvParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + EnvParams->StdHeader.Func = AMD_INIT_ENV; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(EnvParams); +} + +/********************************************************************** + * Interface call: AmdInitMid + **********************************************************************/ +AGESA_STATUS +AmdInitMid ( + IN OUT AMD_MID_PARAMS *MidParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + MidParams->StdHeader.Func = AMD_INIT_MID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(MidParams); +} + +/********************************************************************** + * Interface call: AmdInitLate + **********************************************************************/ +AGESA_STATUS +AmdInitLate ( + IN OUT AMD_LATE_PARAMS *LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + LateParams->StdHeader.Func = AMD_INIT_LATE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(LateParams); +} + +/********************************************************************** + * Interface call: AmdInitRecovery + **********************************************************************/ +AGESA_STATUS +AmdInitRecovery ( + IN OUT AMD_RECOVERY_PARAMS *RecoveryParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + RecoveryParams->StdHeader.Func = AMD_INIT_RECOVERY; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(RecoveryParams); +} + +/********************************************************************** + * Interface call: AmdInitResume + **********************************************************************/ +AGESA_STATUS +AmdInitResume ( + IN AMD_RESUME_PARAMS *ResumeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ResumeParams->StdHeader.Func = AMD_INIT_RESUME; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(ResumeParams); +} + +/********************************************************************** + * Interface call: AmdS3LateRestore + **********************************************************************/ +AGESA_STATUS +AmdS3LateRestore ( + IN OUT AMD_S3LATE_PARAMS *S3LateParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + S3LateParams->StdHeader.Func = AMD_S3LATE_RESTORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(S3LateParams); +} + +/********************************************************************** + * Interface call: AmdS3Save + **********************************************************************/ +AGESA_STATUS +AmdS3Save ( + IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdS3SaveParams->StdHeader.Func = AMD_S3_SAVE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdS3SaveParams); +} + +/********************************************************************** + * Interface call: AmdLateRunApTask + **********************************************************************/ +AGESA_STATUS +AmdLateRunApTask ( + IN AP_EXE_PARAMS *AmdApExeParams +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = AMD_LATE_RUN_AP_TASK; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGetApicId + **********************************************************************/ +AGESA_STATUS +AmdGetApicId ( + IN OUT AMD_APIC_PARAMS *AmdParamApic +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamApic->StdHeader.Func = AMD_GET_APIC_ID; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamApic); +} + +/********************************************************************** + * Interface service call: AmdGetPciAddress + **********************************************************************/ +AGESA_STATUS +AmdGetPciAddress ( + IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamGetPci->StdHeader.Func = AMD_GET_PCI_ADDRESS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamGetPci); +} + +/********************************************************************** + * Interface service call: AmdIdentifyCore + **********************************************************************/ +AGESA_STATUS +AmdIdentifyCore ( + IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdParamIdentify->StdHeader.Func = AMD_IDENTIFY_CORE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdParamIdentify); +} + +/********************************************************************** + * Interface service call: AmdReadEventLog + **********************************************************************/ +AGESA_STATUS +AmdReadEventLog ( + IN EVENT_PARAMS *Event +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + Event->StdHeader.Func = AMD_READ_EVENT_LOG; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(Event); +} + +/********************************************************************** + * Interface service call: AmdIdentifyDimm + **********************************************************************/ +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify +) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdDimmIdentify->StdHeader.Func = AMD_IDENTIFY_DIMMS; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdDimmIdentify); +} + +AGESA_STATUS +AmdIdsRunApTaskLate ( + IN AP_EXE_PARAMS *AmdApExeParams + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdApExeParams->StdHeader.Func = -1; + return AGESA_UNSUPPORTED; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdApExeParams); +} + +/********************************************************************** + * Interface service call: AmdGet2DDataEye + **********************************************************************/ +AGESA_STATUS +AmdGet2DDataEye ( + IN OUT AMD_GET_DATAEYE *AmdGetDataEye + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + AmdGetDataEye->StdHeader.Func = AMD_GET_2D_DATA_EYE; + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + return Dispatcher(AmdGetDataEye); +} + +/********************************************************************** + * FCH Functions + **********************************************************************/ + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +VOID +FchInitS3EarlyRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_EARLY_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +VOID +FchInitS3LateRestore ( + IN FCH_DATA_BLOCK *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + FchDataPtr->StdHeader->Func = FCH_INIT_S3_LATE_RESTORE; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * WaitForEcLDN9MailboxCmdAck + * + * + * @param[in] StdHeader + * + */ +VOID +WaitForEcLDN9MailboxCmdAck ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(StdHeader); +} + +/** + * ImcSleep - IMC Sleep. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcSleep ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * SoftwareDisableImc - Software disable IMC strap + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +SoftwareDisableImc ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcEnableSurebootTimer - IMC Enable Sureboot Timer. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcEnableSurebootTimer ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcDisableSurebootTimer - IMC Disable Sureboot Timer. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcDisableSurebootTimer ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcWakeup - IMC Wakeup. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcWakeup ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +/** + * ImcIdle - IMC Idle. + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +ImcIdle ( + IN VOID *FchDataPtr + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + ((FCH_DATA_BLOCK*)FchDataPtr)->StdHeader->Func = 0; + return; + if (!module) return; + Dispatcher = module->ModuleDispatcher; + Dispatcher(FchDataPtr); +} + +// TODO This has to be removed +AGESA_STATUS +HeapAllocateBuffer ( + IN OUT VOID *AllocateHeapParams, + IN OUT VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_ALLOCATE_BUFFER; + + InterfaceParams.AllocationMethod = PreMemHeap; + InterfaceParams.NewStructPtr = AllocateHeapParams; + + return Dispatcher(&InterfaceParams); +} + +// TODO This has to be removed +AGESA_STATUS +HeapDeallocateBuffer ( + IN UINT32 BufferHandle, + IN VOID *StdHeader + ) +{ + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_INTERFACE_PARAMS InterfaceParams = {}; + + if (!module) return AGESA_UNSUPPORTED; + Dispatcher = module->ModuleDispatcher; + + InterfaceParams.StdHeader = *(AMD_CONFIG_PARAMS*)StdHeader; + InterfaceParams.StdHeader.Func = AMD_HEAP_DEALLOCATE_BUFFER; + + InterfaceParams.NewStructPtr = &BufferHandle; + + return Dispatcher(&InterfaceParams); +} + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_SET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + return status; +} + +/********************************************************************** + * Interface call: AmdGetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ) +{ + AGESA_STATUS status = AGESA_UNSUPPORTED; + + MODULE_ENTRY Dispatcher = NULL; + const AMD_MODULE_HEADER* module = agesawrapper_locate_module(ModuleIdentifier); + + AMD_ACCESSOR_PARAMS AccessorParams = {}; + + if (!module) return status; + Dispatcher = module->ModuleDispatcher; + + AccessorParams.StdHeader.AltImageBasePtr = 0; + AccessorParams.StdHeader.CalloutPtr = NULL; + AccessorParams.StdHeader.Func = AMD_GET_VALUE; + AccessorParams.StdHeader.ImageBasePtr = 0; + + AccessorParams.AllocationMethod = ByHost; + AccessorParams.FieldName = name; + AccessorParams.FieldValue = *value; + AccessorParams.FieldSize = size; + + status = Dispatcher(&AccessorParams); + + *value = AccessorParams.FieldValue; + size = AccessorParams.FieldSize; + + return status; +} diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/FieldAccessors.h b/src/vendorcode/amd/pi/00730F01/binaryPI/FieldAccessors.h new file mode 100644 index 0000000000..d50e8fc9cd --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/FieldAccessors.h @@ -0,0 +1,111 @@ +/***************************************************************************** + * + * Copyright (c) 2014, Sage Electronic Engineering, LLC + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _FIELDACCESSORS_H_ +#define _FIELDACCESSORS_H_ + +#include "AGESA.h" + +/// AGESA value name +typedef enum { + AMD_GLOBAL_USER_OPTIONS = 0x00020000, + AMD_GLOBAL_NUM_SOCKETS = 0x00020001, + AMD_GLOBAL_NUM_MODULES = 0x00020002, +} AGESA_FIELD_NAME; + +typedef AGESA_STATUS (*SETTER_ENTRY) ( + IN OUT VOID* value, + IN UINT32 size + ); + +typedef AGESA_STATUS (*GETTER_ENTRY) ( + IN OUT VOID** value, + IN UINT32 size + ); + +/// Accessor Interface. +typedef struct { + IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header + IN AGESA_FIELD_NAME FieldName; ///< The service to init + IN ALLOCATION_METHOD AllocationMethod; ///< For pointers, how to allocate space for copied data + IN OUT VOID *Struct; ///< The struct for the service. + IN OUT UINT32 FieldSize; ///< The size of the data value. + IN OUT VOID *FieldValue; ///< The value retrieved or set into the target structure. +} AMD_ACCESSOR_PARAMS; + + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdGetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID** value, + IN UINT32 size + ); + +/********************************************************************** + * Interface call: AmdSetValue + **********************************************************************/ +AGESA_STATUS +AmdSetValue ( + IN CONST AGESA_FIELD_NAME name, + IN OUT VOID* value, + IN UINT32 size + ); + +/** + * Dispatch Table. + * + * The push high dispatcher uses this table to find what entries are currently in the build image. + */ +typedef struct { + UINT32 FunctionId; + SETTER_ENTRY SetValueEntryPoint; + GETTER_ENTRY GetValueEntryPoint; +} ACCESSOR_DISPATCH_TABLE; + +AGESA_STATUS +GetUserOptions( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumSockets( + IN OUT VOID** value, + IN UINT32 size + ); + +AGESA_STATUS +GetNumModules( + IN OUT VOID** value, + IN UINT32 size + ); + +#endif /* _FIELDACCESSORS_H_ */ diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/OptionsIds.h b/src/vendorcode/amd/pi/00730F01/binaryPI/OptionsIds.h new file mode 100644 index 0000000000..53bded3d81 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/OptionsIds.h @@ -0,0 +1,44 @@ +/***************************************************************************** + * + * Copyright (c) 2008 - 2014, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * These options have no effect on the host side of the binary AGESA API. + */ + +#define IDSOPT_IDS_ENABLED FALSE +//#define IDSOPT_ERROR_TRAP_ENABLED FALSE +//#define IDSOPT_CONTROL_ENABLED FALSE +#define IDSOPT_TRACING_ENABLED FALSE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +#define IDS_DEBUG_PRINT_MASK (0) + +#endif //_OPTION_IDS_H_ diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/gcc-intrin.h b/src/vendorcode/amd/pi/00730F01/binaryPI/gcc-intrin.h new file mode 100644 index 0000000000..a63771570a --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/gcc-intrin.h @@ -0,0 +1,833 @@ +/* + Compatibility <intrin_x86.h> header for GCC -- GCC equivalents of intrinsic + Microsoft Visual C++ functions. Originally developed for the ReactOS + (<http://www.reactos.org/>) and TinyKrnl (<http://www.tinykrnl.org/>) + projects. + + Copyright (c) 2006 KJK::Hyperion <hackbunny@reactos.com> + 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> + 2014 Sage Electronic Engineering, LLC + All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in + all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. +*/ + +#if defined (__GNUC__) + +#if !defined(AMDLIB_OPTIMIZE) + #define AMDLIB_OPTIMIZE +#endif + +/* I/O intrin functions. */ +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned char __inbyte(unsigned short Port) +{ + unsigned char value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned short __inword(unsigned short Port) +{ + unsigned short value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __indword(unsigned short Port) +{ + unsigned long value; + + __asm__ __volatile__ ( + "in %1, %0" + : "=a" (value) + : "Nd" (Port) + ); + return value; + +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outbyte(unsigned short Port,unsigned char Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outword(unsigned short Port,unsigned short Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outdword(unsigned short Port,unsigned long Data) +{ + __asm__ __volatile__ ( + "out %0, %1" + : + : "a" (Data), "Nd" (Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __inbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insb" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __inwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insw" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __indwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; insl" + : "+D" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsb" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsw" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __outdwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count) +{ + __asm__ __volatile__ ( + "rep ; outsl" + : "+S" (Buffer), "+c" (Count) + : "d"(Port) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr0, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr1(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr1, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr2, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr3, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr7(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%dr7, %[value]" + : [value] "=r" (value) + ); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readdr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readdr0 (); + break; + + case 1: + return __readdr1 (); + break; + + case 2: + return __readdr2 (); + break; + + case 3: + return __readdr3 (); + break; + + case 7: + return __readdr7 (); + break; + + default: + return -1; + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr0" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr1(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr1" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr2" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr3" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr7(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%dr7" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writedr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writedr0 (Data); + break; + + case 1: + __writedr1 (Data); + break; + + case 2: + __writedr2 (Data); + break; + + case 3: + __writedr3 (Data); + break; + + case 7: + __writedr7 (Data); + break; + + default: + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr0(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr0, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr2(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr2, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr3(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr3, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr4(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr4, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr8(void) +{ + unsigned long value; + __asm__ __volatile__ ( + "mov %%cr8, %[value]" + : [value] "=r" (value)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readcr(unsigned long reg) +{ + switch (reg){ + case 0: + return __readcr0 (); + break; + + case 2: + return __readcr2 (); + break; + + case 3: + return __readcr3 (); + break; + + case 4: + return __readcr4 (); + break; + + case 8: + return __readcr8 (); + break; + + default: + return -1; + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr0(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr0" + : + : "r" (Data) + : "memory" + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr2(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr2" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr3(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr3" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr4(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr4" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr8(unsigned long Data) +{ + __asm__ __volatile__ ( + "mov %0, %%cr8" + : + : "r" (Data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writecr(unsigned long reg, unsigned long Data) +{ + switch (reg){ + case 0: + __writecr0 (Data); + break; + + case 2: + __writecr2 (Data); + break; + + case 3: + __writecr3 (Data); + break; + + case 4: + __writecr4 (Data); + break; + + case 8: + __writecr8 (Data); + break; + + default: + break; + } +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +UINT64 __readmsr(UINT32 msr) +{ + UINT64 retval; + __asm__ __volatile__( + "rdmsr" + : "=A" (retval) + : "c" (msr) + ); + return retval; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writemsr (UINT32 msr, UINT64 Value) +{ + __asm__ __volatile__ ( + "wrmsr" + : + : "c" (msr), "A" (Value) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +UINT64 __rdtsc(void) +{ + UINT64 retval; + __asm__ __volatile__ ( + "rdtsc" + : "=A" (retval)); + return retval; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __cpuid(int CPUInfo[], const int InfoType) +{ + __asm__ __volatile__( + "cpuid" + :"=a" (CPUInfo[0]), "=b" (CPUInfo[1]), "=c" (CPUInfo[2]), "=d" (CPUInfo[3]) + : "a" (InfoType) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _disable(void) +{ + __asm__ __volatile__ ("cli"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _enable(void) +{ + __asm__ __volatile__ ("sti"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __halt(void) +{ + __asm__ __volatile__ ("hlt"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __debugbreak(void) +{ + __asm__ __volatile__ ("int3"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __invd(void) +{ + __asm__ __volatile__ ("invd"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __wbinvd(void) +{ + __asm__ __volatile__ ("wbinvd"); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __lidt(void *Source) +{ + __asm__ __volatile__("lidt %0" : : "m"(*(short*)Source)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsbyte(const unsigned long Offset, const unsigned char Data) +{ + __asm__ ("movb %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "iq" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsword(const unsigned long Offset, const unsigned short Data) +{ + __asm__ ("movw %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "ir" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __writefsdword(const unsigned long Offset, const unsigned long Data) +{ + __asm__ ("movl %[Data], %%fs:%a[Offset]" + : + : [Offset] "ir" (Offset), [Data] "ir" (Data)); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned char __readfsbyte(const unsigned long Offset) +{ + unsigned char value; + __asm__ ("movb %%fs:%a[Offset], %[value]" + : [value] "=q" (value) + : [Offset] "ir" (Offset)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned short __readfsword(const unsigned long Offset) +{ + unsigned short value; + __asm__ ("movw %%fs:%a[Offset], %[value]" + : [value] "=q" (value) + : [Offset] "ir" (Offset)); + return value; +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +unsigned long __readfsdword(unsigned long Offset) +{ + unsigned long value; + __asm__ ("movl %%fs:%a[Offset], %[value]" + : [value] "=r" (value) + : [Offset] "ir" (Offset)); + return value; +} + +#ifdef __SSE3__ +typedef long long __v2di __attribute__ ((__vector_size__ (16))); +typedef long long __m128i __attribute__ ((__vector_size__ (16), __may_alias__)); + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs2 (void *__A, __m128i __B) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_movntdq ((__v2di *)__A, (__v2di)__B); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_stream_si128_fs (void *__A, void *__B) +{ + __m128i data; + data = (__m128i) __builtin_ia32_lddqu ((char const *)__B); + _mm_stream_si128_fs2 (__A, data); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_clflush_fs (void *__A) +{ + __asm__(".byte 0x64"); // fs prefix + __builtin_ia32_clflush (__A); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_mfence (void) +{ + __builtin_ia32_mfence (); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void _mm_sfence (void) +{ + __builtin_ia32_sfence (); +} +#endif /* __SSE3__ */ + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __stosb(unsigned char *dest, unsigned char data, size_t count) +{ + __asm__ __volatile__ ( + "rep ; stosb " + : "+D" (dest), "+c" (count) + : "a"(data) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void __movsb(unsigned char *dest, unsigned char *data, size_t count) +{ + __asm__ __volatile__ ( + "movsb " + : "+D" (dest), "+S"(data), "+c" (count) + ); +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void debug_point ( unsigned short Port, unsigned long Data ) +{ + __outdword (Port, Data); + __asm__ __volatile__ (".word 0xfeeb"); + +} + +static +AMDLIB_OPTIMIZE +__inline__ __attribute__((always_inline)) +void delay_point ( unsigned short Port, unsigned long Data, unsigned long delayTime ) +{ + UINTN Index; + Index = 0; + __outdword (Port, Data); + while (Index < delayTime * 600000) { + __outdword (0xE0, 0); + Index ++; + } +} +#endif /* defined (__GNUC__) */ diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc new file mode 100644 index 0000000000..2c51eb1fe8 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc @@ -0,0 +1,1311 @@ +/* + * Copyright (c) 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/****************************************************************************** +* AMD Generic Encapsulated Software Architecture +* +* $Workfile:: GccCar.inc $Revision:: 32932 $ +* +* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier +* +******************************************************************************/ + +.altmacro + +BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */ +BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */ +CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */ +CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */ +CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */ +CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */ + +APIC_BASE_ADDRESS = 0x0000001B + APIC_BSC = 8 /* Boot Strap Core */ + +APIC_MSG_REG = 0x380 # Location of BSC message + APIC_MSG = 0x00DE00AD # Message data + APIC_INVD_ALL_DONE_MSG = 0x00AD00DE /* Indicate all cores have invalidated */ +APIC_CMD_LO_REG = 0x300 # APIC command low +APIC_CMD_HI_REG = 0x310 # APIC command high +// del CMD_REG_TO_READ_DATA = 0x00000338 # APIC command for remote read of APIC_MSG_REG + REMOTE_READ_STS = 0x00030000 # Remote read status mask + REMOTE_DELIVERY_PEND = 0x00010000 # Remote read is pending + REMOTE_DELIVERY_DONE = 0x00020000 # Remote read is complete + DELIVERY_STS_BIT = 12 #Delivery status valid bit +APIC_ID_REG = 0x0020 # Local APIC ID offset + APIC20_APICID = 24 +APIC_REMOTE_READ_REG = 0x00C0 # Remote read offset + +# Flags can only run from bits 31 to 24. Bits 23:0 are in use. +AMD_CU_NEED_TO_WAIT = 31 +AMD_CU_SEND_INVD_MSG = 30 +AMD_CU_RESTORE_ES = 29 + +AMD_MTRR_VARIABLE_BASE0 = 0x0200 +AMD_MTRR_VARIABLE_BASE6 = 0x020C +AMD_MTRR_VARIABLE_BASE7 = 0x020E + VMTRR_VALID = 11 + MTRR_TYPE_WB = 0x06 + MTRR_TYPE_WP = 0x05 + MTRR_TYPE_WT = 0x04 + MTRR_TYPE_UC = 0x00 +AMD_MTRR_VARIABLE_MASK7 = 0x020F +AMD_MTRR_FIX64k_00000 = 0x0250 +AMD_MTRR_FIX16k_80000 = 0x0258 +AMD_MTRR_FIX16k_A0000 = 0x0259 +AMD_MTRR_FIX4k_C0000 = 0x0268 +AMD_MTRR_FIX4k_C8000 = 0x0269 +AMD_MTRR_FIX4k_D0000 = 0x026A +AMD_MTRR_FIX4k_D8000 = 0x026B +AMD_MTRR_FIX4k_E0000 = 0x026C +AMD_MTRR_FIX4k_E8000 = 0x026D +AMD_MTRR_FIX4k_F0000 = 0x026E +AMD_MTRR_FIX4k_F8000 = 0x026F + +/* Reproduced from AGESA.h */ +AMD_AP_MTRR_FIX64k_00000 = 0x00000250 +AMD_AP_MTRR_FIX16k_80000 = 0x00000258 +AMD_AP_MTRR_FIX16k_A0000 = 0x00000259 +AMD_AP_MTRR_FIX4k_C0000 = 0x00000268 +AMD_AP_MTRR_FIX4k_C8000 = 0x00000269 +AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A +AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B +AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C +AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D +AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E +AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F +CPU_LIST_TERMINAL = 0xFFFFFFFF + +AMD_MTRR_DEFTYPE = 0x02FF + WB_DRAM_TYPE = 0x1E /* MemType - memory type */ + MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */ + MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */ + +HWCR = 0x0C0010015 /* Hardware Configuration */ + INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */ + +IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */ + /* uses 16h - 19h */ +TOP_MEM = 0x0C001001A /* Top of Memory */ +TOP_MEM2 = 0x0C001001D /* Top of Memory2 */ + +LS_CFG = 0x0C0011020 /* Load-Store Configuration */ + DIS_SS = 28 /* Family 10h,12h,15h:Disable Streng Store functionality */ + DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */ + +IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */ + IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */ + DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */ + DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */ + +DC_CFG = 0x0C0011022 /* Data Cache Configuration */ + DC_DIS_SPEC_TLB_WALK = 4 /* Disable speculative table-walks */ + DIS_HW_PF = 13 /* Hardware prefetches bit */ +DE_CFG = 0x0C0011029 /* Decode Configuration */ + CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */ + +BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */ +CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */ + F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */ + IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */ + F16_CL_LINES_TO_L2_DIS = 15 /* ClLinesToL2Dis */ + +//del CU_CFG3 = 0x0C001102B /* Combined Unit Configuration 3 */ +//del COMBINE_CR0_CD = 49 /* Combine CR0.CD for both cores of a compute unit */ +//del L2I_CFG = 0x0C00110A0 /* L2I Configuration */ + L2_RINSER_DIS = 20 /* L2 rinser disable */ + PREFETCHER_DIS = 7 /* L2 prefetcher disable*/ + CACHE_IC_ATTR_DIS = 3 /* Inserting IC attributes into the L2 disable */ + +CR0_PE = 0 # Protection Enable +CR0_NW = 29 # Not Write-through +CR0_CD = 30 # Cache Disable +CR0_PG = 31 # Paging Enable + +/* CPUID Functions */ + +CPUID_MODEL = 1 +AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */ +AMD_CPUID_L2Cache = 0X80000006 /* L2/L3 cache info */ +AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */ + APIC_ID_CORE_ID_SIZE = 12 /* ApicIdCoreIdSize bit position */ + +NB_CFG = 0x0C001001F /* Northbridge Configuration Register */ + INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */ + ENABLE_CF8_EXT_CFG = 46 /* EnableCf8ExtCfg - enable CF8 extended configuration cycles */ + +MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */ + CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */ + SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */ + MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */ + MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */ + MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */ + MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */ + +PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */ + PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */ + PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */ + CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */ + CONFIG_EVENT_H = 4 /* Increment count by number of event */ + /* occured in clock cycle */ + EVENT_ENABLE = 22 /* Enable the event */ +PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */ + +COMPUTE_UNIT_STATUS = 0x08000C580 /* Compute Unit Status Register */ + QUAD_CORE = 24 /* QuadCore four cores of a compute unit are enabled */ + DUAL_CORE = 16 /* DualCore two cores of a compute unit are enabled */ + TRIPLE_CORE = 8 /* TripleCore three cores of a compute unit are enabled */ + CU_ENABLED = 0 /* Enabled at least one core of a compute unit is enabled */ + +FUNC_3 = 3 +MCA_NB_CFG = 0x44 /* MCA NB Configuration */ +CPU_ERR_DIS = 6 /* CPU error response disable */ +PRODUCT_INFO_REG1 = 0x1FC /* Product Information Register 1 */ + +# Local use flags, in upper most byte if ESI +FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized +FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack +FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit +FLAG_CORE_NOT_IDENTIFIED = 27 # Signals that the cores/compute units of the installed processor is not recognized +FLAG_FORCE_32K_STACK = 28 # Signals that to force 32KB stack size for BSP core +CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW)) +MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN)) + +/**************************************************************************** + * + * CPU MACROS - PUBLIC + * + ****************************************************************************/ +.macro _WRMSR + .byte 0x0f, 0x30 +.endm + +.macro _RDMSR + .byte 0x0F, 0x32 +.endm + +.macro AMD_CPUID arg0 + .ifb \arg0 + mov $0x1, %eax + .byte 0x0F, 0x0A2 /* Execute instruction */ + bswap %eax + xchg %ah, %al /* Ext model in al now */ + rol $0x08, %eax /* Ext model in ah, model in al */ + and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */ + .else + mov \arg0, %eax + .byte 0x0F, 0x0A2 + .endif +.endm + +.macro MAKE_EXT_PCI_ADDR Seg, Bus, Dev, Func, Offset + mov $(1 << 31 | (Seg) << 28 | (((Offset) & (0x0F00)) >> 8) << 24 | (Bus) << 16 | (Dev) << 11 | (Func) << 8) | ((Offset) & (0xFC)), %eax +.endm +/**************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK + + AMD_ENABLE_STACK_FAMILY_HOOK_F16 + +.endm + +/**************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK + + AMD_DISABLE_STACK_FAMILY_HOOK_F16 + +.endm + +/**************************************************************************** +* +* GET_NODE_ID_CORE_ID Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI[7:0] = Core# (0..N, relative to node) +* SI[15:8]= Node# (0..N) +* SI[23:16]= reserved +* SI[24]= flag: 1=Family Unrecognized +* SI[25]= flag: 1=Interface re-entry call +* SI[26]= flag: 1=Core is primary of compute unit +* SI[31:27]= reserved, =0 +****************************************************************************/ +.macro GET_NODE_ID_CORE_ID + LOCAL node_core_exit + + mov $-1, %si + GET_NODE_ID_CORE_ID_F16 + + /* + * Check for unrecognized Family + */ + cmp $-1, %si # Has family (node/core) already been discovered? + jnz node_core_exit # Br if yes + + mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue + + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jc node_core_exit # Br if yes + hlt # Kill APs +node_core_exit: + +.endm + +/* +*************************************************************************** + Family 16h MACROS +***************************************************************************/ +/*-------------------------------------------------- + +AMD_ENABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless + + Set any family specific controls needed to enable the use of + cache as general storage before main memory is available. + +Inputs: + ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +Outputs: + none +Destroyed: + eax, ebx, ecx, edx + +Family 16h requirements (BKDG #48751 section 2.3.3): + * Paging must be disabled. + * MSRC001_0015[INVD_WBINVD]=0 + * MSRC001_1020[DisSS]=1 + * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 + * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 + * MSRC001_1022[DisHwPf]=1 + * If MSRC001_102B[CombineCr0Cd] == 1 then MSRC001_102B[CombineCroCd] = 0 + * No INVD or WBINVD, no exceptions, page faults or interrupts +-------------------------------------------------- + + */ + +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F16 + LOCAL fam16_enable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x07, %al # Is this family 16h? + jnz fam16_enable_stack_hook_exit # Br if no + + bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set + jc fam16_skipClearingBit4 + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion + _WRMSR + +fam16_skipClearingBit4: + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit + _WRMSR + +# mov %ebx, %eax # Restore revision info to EAX +# shr $16, %eax +# and $0x0F, %al # AL = cpu extended model + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + bts $DC_DIS_SPEC_TLB_WALK, %eax # Turn on Disable speculative DC-TLB reloads bit + bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit + _WRMSR # Remove KM in PI 1.1.0.0 + + mov $0x0C00110A0, %ecx # MSR:C001_10A0 + _RDMSR + bts $L2_RINSER_DIS, %eax #Do not search for the repair single bit errors in the background + bts $PREFETCHER_DIS, %eax + bts $CACHE_IC_ATTR_DIS, %eax + _WRMSR + +fam16_enable_stack_hook_exit: +.endm + +/* +; +; AMD_DISABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless +; +; Return any family specific controls to their 'standard' +; settings for using cache with main memory. +; +; Inputs: +; ESI - [31:24] flags; [15:8]= Node#; [7:0]= core# +; Outputs: +; none +; Destroyed: +; eax, ebx, ecx, edx +; +; Family 16h requirements: +; * INVD or WBINVD +; * MSRC001_0015[INVD_WBINVD]=1 +; * MSRC001_1020[DisSS]=0 +; * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 +; * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 +; * MSRC001_1022[DIS_HW_PF]=0 +;--------------------------------------------------- +*/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK_F16 + LOCAL fam16_disable_stack_hook_exit + LOCAL fam16_disable_stack_remote_read_exit +# LOCAL fam16_invd_done_remote_read_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x07, %al # Is this family 16h? + jnz fam16_disable_stack_hook_exit # Br if no + + mov %ebx, %edi # Save revision info to EDI + AMD_CPUID $AMD_CPUID_APIC + mov %cl, %al # AL = number of cores - 1 + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %bx + shl %cl, %bl # BL = theoretical number of cores on socket + dec %bx # BL = core number on socket mask + mov %bl, %ah # AH = core number on socket mask + mov %edi, %ebx # Restore revision info to EBX + mov %ax, %di # DI[15:8] = core number mask, DI[7:0] = number of cores - 1 + + and $0x0F00FF, %ebx + mov %ebx, %eax + shr $8, %eax + or %ax, %bx # Save Extended Model, Model and Stepping to BX + # [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping (bx=0000000000010100, ok) + + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR # dx=0 ax=fee00800 + mov %bx, %dx # Save Extended Model, Model and Stepping to DX + shl $16, %edx #EDX[31:16] = Extended Model, Model and Stepping + mov %eax ,%ebx # EBX = LAPIC base + xor %ecx ,%ecx # Zero out CU flags + bts $AMD_CU_NEED_TO_WAIT, %ecx # Default to waiting + bts $AMD_CU_SEND_INVD_MSG, %ecx # Default to signaling + mov %cr0, %eax + bt $CR0_PE, %ax # Are we in protected mode? + # .if (!carry?) + jc 1f + bts $AMD_CU_RESTORE_ES, %ecx # Indicate ES restore is required + mov %es, %cx # Save ES segment register to CX + xor %ax, %ax + mov %ax, %es # Set ES to big real mode selector for 4GB access + # .endif + +1: + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_ID_REG, %bl # + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %al, %ah # AH = APIC ID + mov %di, %dx # DH = core mask + and %dh, %ah # AH = core number # ax=111 dx=01000F03 + + # .if (zero?) + jnz 1f + # Core 0 of a socket + btr $AMD_CU_SEND_INVD_MSG, %ecx # No need to signal after INVD + #.if (dl != 0) + cmp $0, %dl + jz 2f + # This socket has multiple cores + and $0xf000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %edi + mov %edi, %es:(%ebx) # Signal for non core 0s to complete CAR breakdown + jmp 1f + #.else +2: btr $AMD_CU_NEED_TO_WAIT, %ecx # No need to wait on a single core CPU + #.endif + # .endif +1: + + bt $AMD_CU_NEED_TO_WAIT, %ecx #cx = c0000000 + #.if (carry?) + jnc 1f + #.if (ah == dl) + cmp %dl, %ah + jnz 2f + # This is the highest numbered core on this socket -- wait on core 0 + not %dh # Flip the mask to determine local core 0's APID ID + and %dh, %al # AL = target APIC ID # ax=310 + jmp 3f +2: #.else + # All other cores (including core 0) wait on the next highest core. + # In this way, cores will halt in a cascading fashion down to 0. + inc %al + #.endif +3: + shl $APIC20_APICID, %eax + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # Set target APIC ID + + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $0x338, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam16_disable_stack_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam16_disable_stack_hook_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam16_disable_stack_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + +fam16_disable_stack_remote_read_exit: + rol $8, %ecx # Restore ECX + +1: #.endif + + bt $AMD_CU_RESTORE_ES, %ecx + #.if (carry?) + jnc 1f + mov %cx, %es +1: + mov %ecx, %edi + shr $16, %edx + mov %dx, %bx + + #Handshaking complete. Continue tearing down CAR. + + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads + _WRMSR + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + btr $DC_DIS_SPEC_TLB_WALK, %eax # Turn on speculative table-walks + #.if (bx != 0) # Is this rev A0? + #cmp $0, %bx + #jz 0f + btr $DIS_HW_PF, %eax # Turn on hardware prefetches + #.endif # End workaround for erratum 498 + #0: + _WRMSR + + mov $0x0C00110A0, %ecx #MSR:C001_10A0 + _RDMSR + btr $PREFETCHER_DIS, %eax + btr $CACHE_IC_ATTR_DIS, %eax + _WRMSR + + mov $BU_CFG2, %ecx + _RDMSR + btr $F16_CL_LINES_TO_L2_DIS, %eax + _WRMSR + + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR + wbinvd # Clear the cache tag RAMs + #invd + + #Do Standard Family 16 work + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD + _WRMSR + #.endif # end + + bt $AMD_CU_SEND_INVD_MSG, %edi + #.if (carry?) + jnc 1f + AMD_CPUID $AMD_CPUID_APIC + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %di + shl %cl, %di #DI = theoretical number of cores on socket + dec %di # DI = core number on socket mask + # Non core zero needs to signal to core 0 to proceed + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx # EBX = LAPIC base + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %eax + mov %eax, %es:(%ebx) # Signal for core 0 to complete CAR breakdown + + #TODO: Non core zero needs to wait for core zero to do INVD + #A handshake is required to ensure that all cores on a node invalidate in sync. + and $0x0F000, %bx + or $APIC_ID_REG, %bl + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %di, %dx # Use DL as core mask + not %dl + and %dl, %al # Remote read message from core zero + shl $APIC20_APICID, %eax + + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $0x338, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam16_invd_done_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam16_invd_done_remote_read_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam16_invd_done_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + + jmp 2f +fam16_invd_done_remote_read_exit: +1: #.else + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx + and $0x0F000, %bx + or $APIC_MSG_REG, %bx + mov $APIC_INVD_ALL_DONE_MSG, %edi + mov %edi, %es:(%ebx) +2: #.endif + + mov $0xc0011004, %ecx + _RDMSR + btr $30, %edx + _WRMSR + +fam16_disable_stack_hook_exit: +.endm + +/* +*/ +.macro GET_NODE_ID_CORE_ID_F16 + + LOCAL node_core_f16_exit + LOCAL node_core_f16_AP + LOCAL node_core_f16_shared + LOCAL node_core_f16_AP_not_TN + +#define F16_L2Size 1024 +#define F16_ShareCores 4 +#define F16_AllocMem 0 +#define F16_AllocExe 0 +#define F16_SzAddrBus 40 +#define F16_pad 0 + cmp $-1, %si # Has node/core already been discovered? + jnz node_core_f16_exit # Br if yes + + AMD_CPUID $CPUID_MODEL + shr $12, %eax # AL = cpu extended family + cmp $07, %ah # Is this family 16h? + jnz node_core_f16_exit # Br if no + shr $4, %al # AL = cpu extended model + shr $16, %ebx # BH = LocalApicId + mov %al, %bl # BL = cpu extended model + + # LoadTableAddress(FAM16H_INFO_STRUCT) + # movd mm5, eax # load pointer to Family Info Struc + + xor %esi, %esi # Assume BSC, clear local flags + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jnc node_core_f16_AP # Br if no + + # This is the BSP. + # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) + mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 + out %eax, %dx + jmp 6f #node_core_f16_shared # + +node_core_f16_AP: + mov %bl, %al # AL = cpu extended model + shr $8, %bx # BL = CPUID Fn0000_0001_EBX[LocalApicId] + #.if (al == 0) + cmp $3, %al # Is This ML? + jnz 5f + #.else +4: mov %bx, %si + jmp 6f +5: #node_core_f16_AP_not_KB + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + #.endif + #.endif + # + # determine if this core shares MTRRs + # +6: #node_core_f16_shared + mov $COMPUTE_UNIT_STATUS, %eax # Compute Unit Status + mov %si, %bx + shl $3, %bh # Move node# to PCI Dev# field + add %bh, %ah # Adjust for node number + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore + + # BL is MyCore# + mov $0x04, %cx # Use CH as 'first of pair' core# + #.while (cl > 0) + jmp 0f + 8: + bt $CU_ENABLED, %eax # Is pair enabled? + #.if (carry?) # + jnc 1f + mov $0x01, %bh # flag core as primary + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + #inc %ch + xor %bh, %bh # flag core as NOT primary + # + bt $DUAL_CORE, %eax + #.if (carry?) + jnc 5f + add $1, %eax + #.endif + 5: + bt $TRIPLE_CORE, %eax + jnc 5f + #.if (carry?) + add $2, %eax + #.endif + 5: + bt $QUAD_CORE, %eax + jnc 5f + #.if (carry?) + add $3, %eax + #.endif + 5: + #.break .if (ch >= bl) #TODO: + cmp %bl, %ch + jae 9f + inc %ch + #.endif + 1: + shr $1, %eax + dec %cl + 0: + cmp $0x0, %cl + ja 8b + + #.endw + 9: + + #.if (cl == 0) + or %cl, %cl + jne 1f + #Error - core# didn't match Compute Unit Status content + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns + #.endif + 1: + #.if (bh != 0) # Check state of primary for the matched core + or %bh, %bh + je 2f + bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value + #.endif + 2: + +node_core_f16_exit: + +.endm + +/***************************************************************************** +* AMD_ENABLE_STACK: Setup a stack +* +* In: +* EBX = Return address (preserved) +* +* Out: +* SS:ESP - Our new private stack location +* +* EAX = AGESA_STATUS +* +* ECX = Stack size in bytes +* +* Requirements: +* * This routine presently is limited to a max of 64 processor cores +* Preserved: +* ebx ebp +* Destroyed: +* eax, ecx, edx, edi, esi, ds, es, ss, esp +* mmx0, mmx1 +* +* Description: +* Fixed MTRR address allocation to cores: +* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. +* There is a max of 1 BSP, 7 core0s and 56 other cores. +* Although each core has it's own cache storage, they share the address space. Each core must +* be assigned a private and unique address space for its stack. To support legacy systems, +* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved +* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) +* +* 80000h 40000h 00000h +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* 64K | | | | | | | | | 64K ea +* ea +----------+----------+----------+----------+----------+----------+----------+----------+ +* | MTRR 0000_0250 MTRRfix64K_00000 | +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node +* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* +* C0000h B0000h A0000h 90000h 80000h +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +*16K | | | | | | | | | | | | | | | | | +* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node +* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* +* E0000h D0000h C0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* +* 100000h F0000h E0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +*****************************************************************************/ +.macro AMD_ENABLE_STACK + +# These are local labels. Declared so linker doesn't cause 'redefined label' errors + LOCAL SetupStack + LOCAL Real16bMode + LOCAL Protected32Mode + LOCAL ClearTheStack + +# Note that SS:ESP will be default stack. Note that this stack +# routine will not be used after memory has been initialized. Because +# of its limited lifetime, it will not conflict with typical PCI devices. + movd %ebx, %mm0 # Put return address in a safe place + movd %ebp, %mm1 # Save some other user registers + + # get node id and core id of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node) + # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established + + # determine if stack is already enabled. We are using the DefType MSR for this determination. + # It is =0 after reset; CAR setup sets it to enable the MTRRs + mov %cr0, %eax + test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits) + jnz SetupStack # Jump if yes + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR + test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) + jz SetupStack # Jump if no + or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized + +SetupStack: + # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM + mov %esi, %ebx # Get my Node/Core info + xor %bl, %bl + shl $3, %bh # Isolate my node#, match alignment for PCI Dev# + mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit + add %bh, %ah + mov %eax, %ebx # Save PCI address for Base/Limit pair + + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) + out %eax, %dx # DRAM Limit = node0, no interleave + + mov %ebx, %eax + sub $4, %eax # Now point to the Base register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + mov $0x00000003, %eax # Set the read and write enable bits + out %eax, %dx # DRAM Base = 0x0000, R/W + + AMD_ENABLE_STACK_FAMILY_HOOK + + # Init CPU MSRs for our init routines + mov $MTRR_SYS_CFG, %ecx # SYS_CFG + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit + _WRMSR + + mov %esi, %eax + bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry? + #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP + jc 0f + bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit? + #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset + # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores + # Clear all variable and Fixed MTRRs for non-shared cores + jnc 0f + mov $AMD_MTRR_VARIABLE_BASE0, %ecx + xor %eax, %eax + xor %edx, %edx + #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n] + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x10, %cl + jne 2b + mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250 + _WRMSR + mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258 + _WRMSR + mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259 + _WRMSR + mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 + #.while (cl != 70h) + jmp 3f + 4: + _WRMSR + inc %cl + #.endw + 3: + cmp $0x70, %cl + jne 4b + # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. + # - not strictly needed since the FixedMTRRs take presedence. + mov $(16 * 1024 * 1024), %eax + mov $TOP_MEM, %ecx # MSR:C001_001A + _WRMSR + #.endif # End Is_Primary + #.endif # End Stack_ReEntry + 0: + # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores + xor %eax, %eax + xor %edx, %edx + mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019 + #.while (cl != 1Ah) + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x1A, %cl + jne 2b + mov $TOP_MEM2, %ecx # MSR:C001_001D + _WRMSR + + # setup MTTRs for stacks + # A speculative read can be generated by a speculative fetch mis-aligned in a code zone + # or due to a data zone being interpreted as code. When a speculative read occurs outside a + # controlled region (intentionally used by software), it could cause an unwanted cache eviction. + # To prevent speculative reads from causing an eviction, the unused cache ranges are set + # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. + # Note: some core stack regions will share an MTRR since the control granularity is much + # larger than the allocated stack zone. The allocation algorithm must account for this 'extra' + # space covered by the MTRR when parseling out cache space for the various uses. In some cases + # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c + # + # Outcome of this block is that: (Note the MTRR map at the top of the file) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) + # + + mov %si, %ax # Load node, core + #.if (al == 0) # Is a core 0? + or %al, %al + jne 1f + #.if (ah == 0) # Is Node 0? (BSP) + or %ah, %ah + jne 2f + # Is BSP, assign a 64K stack + mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE >> 12)), %ebx + mov $BSP_STACK_BASE_ADDR, %ebp + jmp 0f + #.else # node 1 to 7, core0 + 2: + # Is a Core0 of secondary node, assign 16K stacks + mov $AMD_MTRR_FIX16k_80000, %bx + shl $16, %ebx # + mov %ah, %bh # Node# is used as slot# + mov $(CORE0_STACK_SIZE >> 12), %bl + mov %ah, %al # Base = (Node# * Size)# + mul %bl # + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE0_STACK_BASE_ADDR, %eax + mov %eax, %ebp + #.endif + jmp 0f + #.else #core 1 thru core 7 + 1: + # Is core 1-7 of any node, assign 4K stacks + mov $8, %al # CoreIndex = ( (Node# * 8) ... + mul %ah # + mov %si, %bx # + add %bl, %al # ... + Core#)# + + mov $AMD_MTRR_FIX64k_00000, %bx + shl $16, %ebx # + mov %al, %bh # Slot# = (CoreIndex / 16) + 4# + shr $4, %bh # + add $4, %bh # + mov $(CORE1_STACK_SIZE >> 12), %bl + + mul %bl # Base = ( (CoreIndex * Size) ... + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)# + mov %eax, %ebp + #.endif + 0: + + # Now set the MTRR. Add this to already existing settings (don't clear any MTRR) + mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot + mov %bh, %cl # ShiftCount = ((slot# ... + and $0x03, %cl # ... % 4) ... + shl $0x03, %cl # ... * 8)# + shl %cl, %edi # Cache type is now in correct position + ror $16, %ebx # Get the MTRR address + movzx %bx, %ecx # + rol $16, %ebx # Put slot# & size back in BX + _RDMSR # Read-modify-write the MSR + #.if (bh < 4) # Is value in lower or upper half of MSR? + cmp $4, %bh + jae 1f + or %edi, %eax # + jmp 0f + #.else + 1: # + or %edi, %edx # + #.endif # + 0: + _WRMSR # + + # Enable MTRR defaults as UC type + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR # Read-modify-write the MSR + bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn + bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn + _WRMSR + + # Close the modification window on the Fixed MTRRs + mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn + bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit + _WRMSR + + # Enable caching in CR0 + mov %cr0, %eax # Enable WT/WB cache + btr $CR0_PG, %eax # Make sure paging is disabled + btr $CR0_CD, %eax # Clear CR0 NW and CD + btr $CR0_NW, %eax + mov %eax, %cr0 + + # Use the Stack Base & size to calculate SS and ESP values + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # + mov %ebp, %esp # Initialize the stack pointer + mov %esp, %edi # Copy the stack start to edi + movzx %bl, %bx + movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore + shl $12, %ebx # Make size full byte count (* 4K) + add %ebx, %esp # Set the Stack Pointer as full linear address + sub $4, %esp + # + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - 32b start address of stack block + # ebx - size of stack block + # esp - 32b linear stack pointer + # + + # Determine mode for SS base; + mov %cr0, %ecx # Check for 32-bit protect mode + bt $CR0_PE, %ecx # + #.if (!carry?) # PE=0 means real mode + jc Protected32Mode + mov %cs, %cx # PE=1 + cmp $0x0D000, %cx # Check for CS + jb Protected32Mode # If CS < D000, it is a selector instead of a segment + # alter SS:ESP for 16b Real Mode: +Real16bMode: + mov %edi, %eax + shr $4, %eax # Create a Real Mode segment for ss, ds, es + mov %ax, %ss + mov %ax, %ds + mov %ax, %es + shl $4, %eax + sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode + mov %ebx, %esp # Make SP an offset from SS + sub $4, %esp # + # .endif # endif + # #else + # Default is to use Protected 32b Mode + #.endif + ; +Protected32Mode: + # + # Clear The Stack + # Now that we have set the location and the MTRRs, initialize the cache by + # reading then writing to zero all of the stack area. + # review: + # ss - Stack base + # esp - stack pointer + # ebx - size of stack block + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - address of start of stack block + # + +ClearTheStack: # Stack base is in SS, stack pointer is in ESP + shr $2, %ebx # ebx = stack block size in dwords + mov %bx, %cx # + # Check our flags - Don't clear an existing stack + #.if ( !(esi & 0FF000000h)) # Check our flags + test $(1 << FLAG_STACK_REENTRY), %esi + jne 1f + cld + mov %edi, %esi + rep lodsl (%esi) # Pre-load the range + xor %eax, %eax + mov %bx, %cx + mov %edi, %esi # Preserve base for push on stack + rep stosl (%edi) # Clear the range + movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword + shl $2, %ebx # Put stack size and base + push %ebx # in top of stack + push %esi + + mov %ebx, %ecx # Return size of stack in bytes + xor %eax, %eax # eax = 0 : no error return code + jmp 0f + #.else + 1: + movzx %cx, %ecx + shl $2, %ecx # Return size of stack in bytes + mov %esi, %eax + shr $24, %eax # Keep the flags as part of the error report + or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up) + #.endif + 0: + + movd %mm0, %ebx # Restore return address + movd %mm1, %ebp +.endm + +/***************************************************************************** +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP +* +* In: +* none +* +* Out: +* EAX = AGESA_SUCCESS +* +* Preserved: +* ebx +* Destroyed: +* eax, ecx, edx, esp +*****************************************************************************/ +.macro AMD_DISABLE_STACK + + mov %ebx, %esp # Save return address + + # get node/core/flags of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) + + # Turn on modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications + _WRMSR + + # Set lower 640K MTRRs for Write-Back memory caching + mov $AMD_MTRR_FIX64k_00000, %ecx + mov $0x1E1E1E1E, %eax + mov %eax, %edx + _WRMSR # 0 - 512K = WB Mem + mov $AMD_MTRR_FIX16k_80000, %ecx + _WRMSR # 512K - 640K = WB Mem + + # Turn off modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification + _WRMSR + + AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations + + mov %esp, %ebx + xor %eax, %eax + +.endm + diff --git a/src/vendorcode/amd/pi/Kconfig b/src/vendorcode/amd/pi/Kconfig index 5919b6b50a..892892dcd2 100644 --- a/src/vendorcode/amd/pi/Kconfig +++ b/src/vendorcode/amd/pi/Kconfig @@ -27,20 +27,20 @@ if CPU_AMD_PI_00630F01 || CPU_AMD_PI_00730F01 || CPU_AMD_PI_00660F01 -config AGESA_BINARY_PI_PATH +config AGESA_BINARY_PI_VENDORCODE_PATH string "AGESA PI directory path" - default "3rdparty/blobs/pi/amd/00630F01" if CPU_AMD_PI_00630F01 - default "3rdparty/blobs/pi/amd/00730F01" if CPU_AMD_PI_00730F01 - default "3rdparty/blobs/pi/amd/00660F01" if CPU_AMD_PI_00660F01 + default "src/vendorcode/amd/pi/00630F01" if CPU_AMD_PI_00630F01 + default "src/vendorcode/amd/pi/00730F01" if CPU_AMD_PI_00730F01 + default "src/vendorcode/amd/pi/00660F01" if CPU_AMD_PI_00660F01 help - Specify where to find the AGESA headers and binary file + Specify where to find the AGESA header files for AMD platform initialization. config AGESA_BINARY_PI_FILE string "AGESA PI binary file name" - default "FP3/AGESA.bin" if CPU_AMD_PI_00630F01 - default "FT3b/AGESA.bin" if CPU_AMD_PI_00730F01 - default "FP4/AGESA.bin" if CPU_AMD_PI_00660F01 + default "3rdparty/blobs/pi/amd/00630F01/FP3/AGESA.bin" if CPU_AMD_PI_00630F01 + default "3rdparty/blobs/pi/amd/00730F01/FT3b/AGESA.bin" if CPU_AMD_PI_00730F01 + default "3rdparty/blobs/pi/amd/00660F01/FP4/AGESA.bin" if CPU_AMD_PI_00660F01 help Specify the binary file to use for AMD platform initialization. diff --git a/src/vendorcode/amd/pi/Makefile.inc b/src/vendorcode/amd/pi/Makefile.inc index 9353b82a67..a3d7fc16d6 100644 --- a/src/vendorcode/amd/pi/Makefile.inc +++ b/src/vendorcode/amd/pi/Makefile.inc @@ -30,7 +30,7 @@ ifeq ($(CONFIG_CPU_AMD_PI_00630F01)$(CONFIG_CPU_AMD_PI_00730F01)$(CONFIG_CPU_AMD_PI_00660F01),y) # AGESA V5 Files -AGESA_ROOT = $(call strip_quotes,$(src)/../$(CONFIG_AGESA_BINARY_PI_PATH)) +AGESA_ROOT = $(call strip_quotes,$(CONFIG_AGESA_BINARY_PI_VENDORCODE_PATH)) AGESA_INC = -I$(obj) @@ -134,7 +134,7 @@ ramstage-libs += $(obj)/agesa/libagesa.a ####################################################################### cbfs-files-$(CONFIG_CPU_AMD_AGESA_BINARY_PI) += AGESA -AGESA-file := $(CONFIG_AGESA_BINARY_PI_PATH)/$(CONFIG_AGESA_BINARY_PI_FILE) +AGESA-file := $(CONFIG_AGESA_BINARY_PI_FILE) AGESA-type := raw AGESA-position := $(CONFIG_AGESA_BINARY_PI_LOCATION) |