diff options
Diffstat (limited to 'src/vendorcode')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FirmwareVersionInfoHob.h | 67 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h | 2866 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h | 3331 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h | 136 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h | 270 |
6 files changed, 0 insertions, 6718 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FirmwareVersionInfoHob.h deleted file mode 100644 index 0dbafffa86..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FirmwareVersionInfoHob.h +++ /dev/null @@ -1,67 +0,0 @@ -/** @file - Header file for Firmware Version Information - - Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR> - - This program and the accompanying materials are licensed and made available under - the terms and conditions of the BSD License which accompanies this distribution. - The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ -#define _FIRMWARE_VERSION_INFO_HOB_H_ - -#include <Uefi/UefiMultiPhase.h> -#include <Pi/PiBootMode.h> -#include <Pi/PiHob.h> - -#pragma pack(1) -/// -/// Firmware Version Structure -/// -typedef struct { - UINT8 MajorVersion; - UINT8 MinorVersion; - UINT8 Revision; - UINT16 BuildNumber; -} FIRMWARE_VERSION; - -/// -/// Firmware Version Information Structure -/// -typedef struct { - UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name - UINT8 VersionStringIndex; ///< Offset 1 Index of Version String - FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version -} FIRMWARE_VERSION_INFO; - -#ifndef __SMBIOS_STANDARD_H__ -/// -/// The Smbios structure header. -/// -typedef struct { - UINT8 Type; - UINT8 Length; - UINT16 Handle; -} SMBIOS_STRUCTURE; -#endif - -/// -/// Firmware Version Information HOB Structure -/// -typedef struct { - EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB - SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB - UINT8 Count; ///< Offset 28 Number of FVI elements included. -/// -/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer -/// -} FIRMWARE_VERSION_INFO_HOB; -#pragma pack() - -#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h deleted file mode 100644 index e03408d5a8..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPUPD_H__ -#define __FSPUPD_H__ - -#include <FspEas.h> - -#pragma pack(1) - -#define FSPT_UPD_SIGNATURE 0x545F4450554C4E43 /* 'CNLUPD_T' */ - -#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4E43 /* 'CNLUPD_M' */ - -#define FSPS_UPD_SIGNATURE 0x535F4450554C4E43 /* 'CNLUPD_S' */ - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h deleted file mode 100644 index 05210d6801..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h +++ /dev/null @@ -1,2866 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -#include <MemInfoHob.h> - -/// -/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. -/// -typedef struct { - UINT8 Revision; ///< Chipset Init Info Revision - UINT8 Rsvd[3]; ///< Reserved - UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table - UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table -} CHIPSET_INIT_INFO; - - -/** Fsp M Configuration -**/ -typedef struct { - -/** Offset 0x0040 - Platform Reserved Memory Size - The minimum platform memory size required to pass control into DXE -**/ - UINT64 PlatformMemorySize; - -/** Offset 0x0048 - Memory SPD Pointer Channel 0 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr00; - -/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr01; - -/** Offset 0x0050 - Memory SPD Pointer Channel 1 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr10; - -/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr11; - -/** Offset 0x0058 - SPD Data Length - Length of SPD Data - 0x100:256 Bytes, 0x200:512 Bytes -**/ - UINT16 MemorySpdDataLen; - -/** Offset 0x005A - Dq Byte Map CH0 - Dq byte mapping between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqByteMapCh0[12]; - -/** Offset 0x0066 - Dq Byte Map CH1 - Dq byte mapping between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqByteMapCh1[12]; - -/** Offset 0x0072 - Dqs Map CPU to DRAM CH 0 - Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqsMapCpu2DramCh0[8]; - -/** Offset 0x007A - Dqs Map CPU to DRAM CH 1 - Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqsMapCpu2DramCh1[8]; - -/** Offset 0x0082 - RcompResister settings - Indicates RcompReister settings: CNL - 0's means MRC auto configured based on Design - Guidelines, otherwise input an Ohmic value per segment. CFL will need to provide - the appropriate values. -**/ - UINT16 RcompResistor[3]; - -/** Offset 0x0088 - RcompTarget settings - RcompTarget settings: CNL - 0's mean MRC auto configured based on Design Guidelines, - otherwise input an Ohmic value per segment. CFL will need to provide the appropriate values. -**/ - UINT16 RcompTarget[5]; - -/** Offset 0x0092 - Dqs Pins Interleaved Setting - Indicates DqPinsInterleaved setting: board-dependent - $EN_DIS -**/ - UINT8 DqPinsInterleaved; - -/** Offset 0x0093 - VREF_CA - CA Vref routing: board-dependent - 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, - 2:VREF_CA to CH_A and VREF_DQ_B to CH_B -**/ - UINT8 CaVrefConfig; - -/** Offset 0x0094 - Smram Mask - The SMM Regions AB-SEG and/or H-SEG reserved - 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both -**/ - UINT8 SmramMask; - -/** Offset 0x0095 - MRC Fast Boot - Enables/Disable the MRC fast path thru the MRC - $EN_DIS -**/ - UINT8 MrcFastBoot; - -/** Offset 0x0096 - Rank Margin Tool per Task - This option enables the user to execute Rank Margin Tool per major training step - in the MRC. - $EN_DIS -**/ - UINT8 RmtPerTask; - -/** Offset 0x0097 - Training Trace - This option enables the trained state tracing feature in MRC. This feature will - print out the key training parameters state across major training steps. - $EN_DIS -**/ - UINT8 TrainTrace; - -/** Offset 0x0098 - Intel Enhanced Debug - Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied - 0 : Disable, 0x400000 : Enable -**/ - UINT32 IedSize; - -/** Offset 0x009C - Tseg Size - Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build - 0x0400000:4MB, 0x01000000:16MB -**/ - UINT32 TsegSize; - -/** Offset 0x00A0 - MMIO Size - Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB -**/ - UINT16 MmioSize; - -/** Offset 0x00A2 - Probeless Trace - Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. - This also requires IED to be enabled. - $EN_DIS -**/ - UINT8 ProbelessTrace; - -/** Offset 0x00A3 -**/ - UINT8 UnusedUpdSpace0[2]; - -/** Offset 0x00A5 - Enable SMBus - Enable/disable SMBus controller. - $EN_DIS -**/ - UINT8 SmbusEnable; - -/** Offset 0x00A6 - Spd Address Tabl - Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used - if SPD Address is 00 -**/ - UINT8 SpdAddressTable[4]; - -/** Offset 0x00AA - Platform Debug Consent - To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. - Enabling this BIOS option may alter the default value of other debug-related BIOS - options. Note: DCI OOB (aka BSSB) uses CCA probe; [DCI OOB+DbC] and [USB2 DbC] - have the same setting - 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), - 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC) -**/ - UINT8 PlatformDebugConsent; - -/** Offset 0x00AB - USB3 Type-C UFP2DFP Kernel/Platform Debug Support - This BIOS option enables kernel and platform debug for USB3 interface over a UFP - Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DciUsb3TypecUfpDbg; - -/** Offset 0x00AC - PCH Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode -**/ - UINT8 PchTraceHubMode; - -/** Offset 0x00AD - PCH Trace Hub Memory Region 0 buffer Size - Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg0Size; - -/** Offset 0x00AE - PCH Trace Hub Memory Region 1 buffer Size - Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg1Size; - -/** Offset 0x00AF - PchPreMemRsvd - Reserved for PCH Pre-Mem Reserved - $EN_DIS -**/ - UINT8 PchPreMemRsvd[9]; - -/** Offset 0x00B8 - Internal Graphics Pre-allocated Memory - Size of memory preallocated for internal graphics. - 0x00:0MB, 0x01:32MB, 0x02:64MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, - 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, - 0xFD:56MB, 0xFE:60MB -**/ - UINT8 IgdDvmt50PreAlloc; - -/** Offset 0x00B9 - Internal Graphics - Enable/disable internal graphics. - $EN_DIS -**/ - UINT8 InternalGfx; - -/** Offset 0x00BA - Aperture Size - Select the Aperture Size. - 0:128 MB, 1:256 MB, 2:512 MB -**/ - UINT8 ApertureSize; - -/** Offset 0x00BB - Board Type - MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile - Halo, 7=UP Server - 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server -**/ - UINT8 UserBd; - -/** Offset 0x00BC - SA GV - System Agent dynamic frequency support and when enabled memory will be training - at two different frequencies. Only effects ULX/ULT CPUs. 0=Disabled, 1=FixedLow, - 2=FixedMid, 3=FixedHigh, and 4=Enabled. - 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled -**/ - UINT8 SaGv; - -/** Offset 0x00BD -**/ - UINT8 UnusedUpdSpace1; - -/** Offset 0x00BE - DDR Frequency Limit - Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk, - i.e. divide by 133 or 100 - 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133, - 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto -**/ - UINT16 DdrFreqLimit; - -/** Offset 0x00C0 - Low Frequency - SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, - 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 FreqSaGvLow; - -/** Offset 0x00C2 - Mid Frequency - SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, - 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 FreqSaGvMid; - -/** Offset 0x00C4 - Rank Margin Tool - Enable/disable Rank Margin Tool. - $EN_DIS -**/ - UINT8 RMT; - -/** Offset 0x00C5 - Channel A DIMM Control - Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel0; - -/** Offset 0x00C6 - Channel B DIMM Control - Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel1; - -/** Offset 0x00C7 - Scrambler Support - This option enables data scrambling in memory. - $EN_DIS -**/ - UINT8 ScramblerSupport; - -/** Offset 0x00C8 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. </b>0: Initialize; <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x00C9 -**/ - UINT8 UnusedUpdSpace2[15]; - -/** Offset 0x00D8 - SPD Profile Selected - Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP - Profile 1, 3=XMP Profile 2 - 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 -**/ - UINT8 SpdProfileSelected; - -/** Offset 0x00D9 - Memory Reference Clock - 100MHz, 133MHz. - 0:133MHz, 1:100MHz -**/ - UINT8 RefClk; - -/** Offset 0x00DA - Memory Voltage - Memory Voltage Override (Vddq). Default = no override - 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 - Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts -**/ - UINT16 VddVoltage; - -/** Offset 0x00DC - Memory Ratio - Automatic or the frequency will equal ratio times reference clock. Set to Auto to - recalculate memory timings listed below. - 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 -**/ - UINT8 Ratio; - -/** Offset 0x00DD - QCLK Odd Ratio - Adds 133 or 100 MHz to QCLK frequency, depending on RefClk - $EN_DIS -**/ - UINT8 OddRatioMode; - -/** Offset 0x00DE - tCL - CAS Latency, 0: AUTO, max: 31 -**/ - UINT8 tCL; - -/** Offset 0x00DF - tCWL - Min CAS Write Latency Delay Time, 0: AUTO, max: 34 -**/ - UINT8 tCWL; - -/** Offset 0x00E0 - tRCD/tRP - RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 -**/ - UINT8 tRCDtRP; - -/** Offset 0x00E1 - tRRD - Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 -**/ - UINT8 tRRD; - -/** Offset 0x00E2 - tFAW - Min Four Activate Window Delay Time, 0: AUTO, max: 63 -**/ - UINT16 tFAW; - -/** Offset 0x00E4 - tRAS - RAS Active Time, 0: AUTO, max: 64 -**/ - UINT16 tRAS; - -/** Offset 0x00E6 - tREFI - Refresh Interval, 0: AUTO, max: 65535 -**/ - UINT16 tREFI; - -/** Offset 0x00E8 - tRFC - Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 -**/ - UINT16 tRFC; - -/** Offset 0x00EA - tRTP - Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal - values: 5, 6, 7, 8, 9, 10, 12 -**/ - UINT8 tRTP; - -/** Offset 0x00EB - tWR - Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, - 20, 24, 30, 34, 40 - 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, - 34:34, 40:40 -**/ - UINT8 tWR; - -/** Offset 0x00EC - tWTR - Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 -**/ - UINT8 tWTR; - -/** Offset 0x00ED - NMode - System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N -**/ - UINT8 NModeSupport; - -/** Offset 0x00EE - DllBwEn[0] - DllBwEn[0], for 1067 (0..7) -**/ - UINT8 DllBwEn0; - -/** Offset 0x00EF - DllBwEn[1] - DllBwEn[1], for 1333 (0..7) -**/ - UINT8 DllBwEn1; - -/** Offset 0x00F0 - DllBwEn[2] - DllBwEn[2], for 1600 (0..7) -**/ - UINT8 DllBwEn2; - -/** Offset 0x00F1 - DllBwEn[3] - DllBwEn[3], for 1867 and up (0..7) -**/ - UINT8 DllBwEn3; - -/** Offset 0x00F2 - ISVT IO Port Address - ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default -**/ - UINT8 IsvtIoPort; - -/** Offset 0x00F3 - CPU Trace Hub Mode - Select 'Target Debugger' if Trace Hub is used by target debugger software or 'Disable' - trace hub functionality. - 0: Disable, 1:Target Debugger Mode -**/ - UINT8 CpuTraceHubMode; - -/** Offset 0x00F4 - CPU Trace Hub Memory Region 0 - CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg0Size; - -/** Offset 0x00F5 - CPU Trace Hub Memory Region 1 - CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg1Size; - -/** Offset 0x00F6 - Enable or Disable Peci C10 Reset command - Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message - to disable peci reset on C10 exit. The default value is <b>0: Disable</b> for CNL, - and <b>1: Enable</b> for all other CPU's - $EN_DIS -**/ - UINT8 PeciC10Reset; - -/** Offset 0x00F7 - Enable or Disable Peci Sx Reset command - Enable or Disable Peci Sx Reset command; <b>0: Disable;</b> 1: Enable. - $EN_DIS -**/ - UINT8 PeciSxReset; - -/** Offset 0x00F8 -**/ - UINT8 UnusedUpdSpace3[4]; - -/** Offset 0x00FC - Enable Intel HD Audio (Azalia) - 0: Disable, 1: Enable (Default) Azalia controller - $EN_DIS -**/ - UINT8 PchHdaEnable; - -/** Offset 0x00FD - Enable PCH ISH Controller - 0: Disable, 1: Enable (Default) ISH Controller - $EN_DIS -**/ - UINT8 PchIshEnable; - -/** Offset 0x00FE - HECI Timeouts - 0: Disable, 1: Enable (Default) timeout check for HECI - $EN_DIS -**/ - UINT8 HeciTimeouts; - -/** Offset 0x00FF -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x0100 - HECI1 BAR address - BAR address of HECI1 -**/ - UINT32 Heci1BarAddress; - -/** Offset 0x0104 - HECI2 BAR address - BAR address of HECI2 -**/ - UINT32 Heci2BarAddress; - -/** Offset 0x0108 - HECI3 BAR address - BAR address of HECI3 -**/ - UINT32 Heci3BarAddress; - -/** Offset 0x010C - SG dGPU Power Delay - SG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is - 300=300 microseconds -**/ - UINT16 SgDelayAfterPwrEn; - -/** Offset 0x010E - SG dGPU Reset Delay - SG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 - microseconds -**/ - UINT16 SgDelayAfterHoldReset; - -/** Offset 0x0110 - MMIO size adjustment for AUTO mode - Positive number means increasing MMIO size, Negative value means decreasing MMIO - size: 0 (Default)=no change to AUTO mode MMIO size -**/ - UINT16 MmioSizeAdjustment; - -/** Offset 0x0112 - Enable/Disable DMI GEN3 Static EQ Phase1 programming - Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 DmiGen3ProgramStaticEq; - -/** Offset 0x0113 - Enable/Disable PEG 0 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg0Enable; - -/** Offset 0x0114 - Enable/Disable PEG 1 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg1Enable; - -/** Offset 0x0115 - Enable/Disable PEG 2 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg2Enable; - -/** Offset 0x0116 - Enable/Disable PEG 3 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg3Enable; - -/** Offset 0x0117 - PEG 0 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg0MaxLinkSpeed; - -/** Offset 0x0118 - PEG 1 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg1MaxLinkSpeed; - -/** Offset 0x0119 - PEG 2 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg2MaxLinkSpeed; - -/** Offset 0x011A - PEG 3 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg3MaxLinkSpeed; - -/** Offset 0x011B - PEG 0 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 - 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 -**/ - UINT8 Peg0MaxLinkWidth; - -/** Offset 0x011C - PEG 1 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4 - 0:Auto, 1:x1, 2:x2, 3:x4 -**/ - UINT8 Peg1MaxLinkWidth; - -/** Offset 0x011D - PEG 2 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg2MaxLinkWidth; - -/** Offset 0x011E - PEG 3 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg3MaxLinkWidth; - -/** Offset 0x011F - Power down unused lanes on PEG 0 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg0PowerDownUnusedLanes; - -/** Offset 0x0120 - Power down unused lanes on PEG 1 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg1PowerDownUnusedLanes; - -/** Offset 0x0121 - Power down unused lanes on PEG 2 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg2PowerDownUnusedLanes; - -/** Offset 0x0122 - Power down unused lanes on PEG 3 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg3PowerDownUnusedLanes; - -/** Offset 0x0123 - PCIe ASPM programming will happen in relation to the Oprom - Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): - Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after - Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume - 0:Before, 1:After -**/ - UINT8 InitPcieAspmAfterOprom; - -/** Offset 0x0124 - PCIe Disable Spread Spectrum Clocking - PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, - Disable SSC(0x1) - Disable SSC per platform design or for compliance testing - 0:Normal Operation, 1:Disable SSC -**/ - UINT8 PegDisableSpreadSpectrumClocking; - -/** Offset 0x0125 -**/ - UINT8 UnusedUpdSpace5[3]; - -/** Offset 0x0128 - DMI Gen3 Root port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 DmiGen3RootPortPreset[8]; - -/** Offset 0x0130 - DMI Gen3 End port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 DmiGen3EndPointPreset[8]; - -/** Offset 0x0138 - DMI Gen3 End port Hint values per lane - Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 DmiGen3EndPointHint[8]; - -/** Offset 0x0140 - DMI Gen3 RxCTLEp per-Bundle control - Range: 0-15, 0 is default for each bundle, must be specified based upon platform design -**/ - UINT8 DmiGen3RxCtlePeaking[4]; - -/** Offset 0x0144 - Thermal Velocity Boost Ratio clipping - 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction - caused by high package temperatures for processors that implement the Intel Thermal - Velocity Boost (TVB) feature - 0: Disabled, 1: Enabled -**/ - UINT8 TvbRatioClipping; - -/** Offset 0x0145 - Thermal Velocity Boost voltage optimization - 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations - for processors that implement the Intel Thermal Velocity Boost (TVB) feature. - 0: Disabled, 1: Enabled -**/ - UINT8 TvbVoltageOptimization; - -/** Offset 0x0146 -**/ - UINT8 UnusedUpdSpace6[2]; - -/** Offset 0x0148 - PEG Gen3 RxCTLEp per-Bundle control - Range: 0-15, 12 is default for each bundle, must be specified based upon platform design -**/ - UINT8 PegGen3RxCtlePeaking[10]; - -/** Offset 0x0152 - Memory data pointer for saved preset search results - The reference code will store the Gen3 Preset Search results in the SaDataHob's - PegData structure (SA_PEG_DATA) and platform code can save/restore this data to - skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 -**/ - UINT32 PegDataPtr; - -/** Offset 0x0156 - PEG PERST# GPIO information - The reference code will use the information in this structure in order to reset - PCIe Gen3 devices during equalization, if necessary -**/ - UINT8 PegGpioData[28]; - -/** Offset 0x0172 - PCIe Hot Plug Enable/Disable per port - 0(Default): Disable, 1: Enable -**/ - UINT8 PegRootPortHPE[4]; - -/** Offset 0x0176 - DeEmphasis control for DMI - DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB - 0: -6dB, 1: -3.5dB -**/ - UINT8 DmiDeEmphasis; - -/** Offset 0x0177 - Selection of the primary display device - 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics - 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics -**/ - UINT8 PrimaryDisplay; - -/** Offset 0x0178 - Selection of iGFX GTT Memory size - 1=2MB, 2=4MB, 3=8MB, Default is 3 - 1:2MB, 2:4MB, 3:8MB -**/ - UINT16 GttSize; - -/** Offset 0x017A - Temporary MMIO address for GMADR - The reference code will use this as Temporary MMIO address space to access GMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to - (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress - - 0x1) (Where ApertureSize = 256MB) -**/ - UINT32 GmAdr; - -/** Offset 0x017E - Temporary MMIO address for GTTMMADR - The reference code will use this as Temporary MMIO address space to access GTTMMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr - to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO - + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) -**/ - UINT32 GttMmAdr; - -/** Offset 0x0182 - Selection of PSMI Region size - 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 - 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB -**/ - UINT8 PsmiRegionSize; - -/** Offset 0x0183 - Switchable Graphics GPIO information for PEG 0 - Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie0Gpio[24]; - -/** Offset 0x019B - Switchable Graphics GPIO information for PEG 1 - Switchable Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie1Gpio[24]; - -/** Offset 0x01B3 - Switchable Graphics GPIO information for PEG 2 - Switchable Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie2Gpio[24]; - -/** Offset 0x01CB - Switchable Graphics GPIO information for PEG 3 - Switchable Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie3Gpio[24]; - -/** Offset 0x01E3 - Enable/Disable MRC TXT dependency - When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): - MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization - $EN_DIS -**/ - UINT8 TxtImplemented; - -/** Offset 0x01E4 - Enable/Disable SA OcSupport - Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport - $EN_DIS -**/ - UINT8 SaOcSupport; - -/** Offset 0x01E5 - GT slice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtVoltageMode; - -/** Offset 0x01E6 - Maximum GTs turbo ratio override - 0(Default)=Minimal/Auto, 60=Maximum -**/ - UINT8 GtMaxOcRatio; - -/** Offset 0x01E7 - The voltage offset applied to GT slice - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 GtVoltageOffset; - -/** Offset 0x01E9 - The GT slice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtVoltageOverride; - -/** Offset 0x01EB - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtExtraTurboVoltage; - -/** Offset 0x01ED - voltage offset applied to the SA - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 SaVoltageOffset; - -/** Offset 0x01EF - PCIe root port Function number for Switchable Graphics dGPU - Root port Index number to indicate which PCIe root port has dGPU -**/ - UINT8 RootPortIndex; - -/** Offset 0x01F0 - Realtime Memory Timing - 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform - realtime memory timing changes after MRC_DONE. - 0: Disabled, 1: Enabled -**/ - UINT8 RealtimeMemoryTiming; - -/** Offset 0x01F1 - Enable/Disable SA IPU - Enable(Default): Enable SA IPU, Disable: Disable SA IPU - $EN_DIS -**/ - UINT8 SaIpuEnable; - -/** Offset 0x01F2 - IPU IMR Configuration - 0:IPU Camera, 1:IPU Gen Default is 0 - 0:IPU Camera, 1:IPU Gen -**/ - UINT8 SaIpuImrConfiguration; - -/** Offset 0x01F3 - Selection of PSMI Support On/Off - 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support - $EN_DIS -**/ - UINT8 GtPsmiSupport; - -/** Offset 0x01F4 - GT unslice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtusVoltageMode; - -/** Offset 0x01F5 - voltage offset applied to GT unslice - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusVoltageOffset; - -/** Offset 0x01F7 - GT unslice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusVoltageOverride; - -/** Offset 0x01F9 - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusExtraTurboVoltage; - -/** Offset 0x01FB - Maximum GTus turbo ratio override - 0(Default)=Minimal, 60=Maximum -**/ - UINT8 GtusMaxOcRatio; - -/** Offset 0x01FC - SaPreMemProductionRsvd - Reserved for SA Pre-Mem Production - $EN_DIS -**/ - UINT8 SaPreMemProductionRsvd[4]; - -/** Offset 0x0200 - BIST on Reset - Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 BistOnReset; - -/** Offset 0x0201 - Skip Stop PBET Timer Enable/Disable - Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 SkipStopPbet; - -/** Offset 0x0202 - C6DRAM power gating feature - This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM - power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating - feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. - $EN_DIS -**/ - UINT8 EnableC6Dram; - -/** Offset 0x0203 - Over clocking support - Over clocking support; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 OcSupport; - -/** Offset 0x0204 - Over clocking Lock - Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 OcLock; - -/** Offset 0x0205 - Maximum Core Turbo Ratio Override - Maximum core turbo ratio override allows to increase CPU core frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 -**/ - UINT8 CoreMaxOcRatio; - -/** Offset 0x0206 - Core voltage mode - Core voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 CoreVoltageMode; - -/** Offset 0x0207 - Program Cache Attributes - Program Cache Attributes; <b>0: Program</b>; 1: Disable Program. - $EN_DIS -**/ - UINT8 DisableMtrrProgram; - -/** Offset 0x0208 - Maximum clr turbo ratio override - Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 -**/ - UINT8 RingMaxOcRatio; - -/** Offset 0x0209 - Hyper Threading Enable/Disable - Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 HyperThreading; - -/** Offset 0x020A - CPU ratio value - CPU ratio value. Valid Range 0 to 63. CPU Ratio is 0 when disabled. -**/ - UINT8 CpuRatio; - -/** Offset 0x020B - Boot frequency - Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- - <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo - is selected BIOS will start in max non-turbo mode and switch to Turbo mode. - 0:0, 1:1, 2:2 -**/ - UINT8 BootFrequency; - -/** Offset 0x020C - Number of active cores - Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: - 2 </b>;<b>3: 3 </b> - 0:All, 1:1, 2:2, 3:3 -**/ - UINT8 ActiveCoreCount; - -/** Offset 0x020D - Processor Early Power On Configuration FCLK setting - <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- - 2: 400 MHz. - 3: Reserved - 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved -**/ - UINT8 FClkFrequency; - -/** Offset 0x020E - Set JTAG power in C10 and deeper power states - False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 - and deeper power states for debug purpose. <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 JtagC10PowerGateDisable; - -/** Offset 0x020F - Enable or Disable VMX - Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 VmxEnable; - -/** Offset 0x0210 - AVX2 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx2RatioOffset; - -/** Offset 0x0211 - AVX3 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx3RatioOffset; - -/** Offset 0x0212 - BCLK Adaptive Voltage Enable - When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: - Disable;<b> 1: Enable - $EN_DIS -**/ - UINT8 BclkAdaptiveVoltage; - -/** Offset 0x0213 - Core PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 CorePllVoltageOffset; - -/** Offset 0x0214 - core voltage override - The core voltage override which is applied to the entire range of cpu core frequencies. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageOverride; - -/** Offset 0x0216 - Core Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageAdaptive; - -/** Offset 0x0218 - Core Turbo voltage Offset - The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 -**/ - UINT16 CoreVoltageOffset; - -/** Offset 0x021A - Ring Downbin - Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.0: Disable; <b>1: Enable.</b> - $EN_DIS -**/ - UINT8 RingDownBin; - -/** Offset 0x021B - Ring voltage mode - Ring voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 RingVoltageMode; - -/** Offset 0x021C - Ring voltage override - The ring voltage override which is applied to the entire range of cpu ring frequencies. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageOverride; - -/** Offset 0x021E - Ring Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageAdaptive; - -/** Offset 0x0220 - Ring Turbo voltage Offset - The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 -**/ - UINT16 RingVoltageOffset; - -/** Offset 0x0222 - TjMax Offset - TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support - TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 -**/ - UINT8 TjMaxOffset; - -/** Offset 0x0223 - BiosGuard - Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable - $EN_DIS -**/ - UINT8 BiosGuard; - -/** Offset 0x0224 -**/ - UINT8 BiosGuardToolsInterface; - -/** Offset 0x0225 - EnableSgx - Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control - 0: Disable, 1: Enable, 2: Software Control -**/ - UINT8 EnableSgx; - -/** Offset 0x0226 - Txt - Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable - $EN_DIS -**/ - UINT8 Txt; - -/** Offset 0x0227 - DpSscMarginEnable TYPE:{Combo - Enable/Disable. 0: Disable, Use default DisplayPort SSC modulation range 0.5% down - spread, 1: Enable DisplayPort SSC range reduction. Note this should only be used - on systems that exceeds allowed SSC modulation range as defined in VESA's spec - $EN_DIS -**/ - UINT8 DpSscMarginEnable; - -/** Offset 0x0228 - PrmrrSize - 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 -**/ - UINT32 PrmrrSize; - -/** Offset 0x022C - SinitMemorySize - Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable -**/ - UINT32 SinitMemorySize; - -/** Offset 0x0230 - TxtHeapMemorySize - Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable -**/ - UINT32 TxtHeapMemorySize; - -/** Offset 0x0234 - TxtDprMemorySize - Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable -**/ - UINT32 TxtDprMemorySize; - -/** Offset 0x0238 - TxtDprMemoryBase - Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable -**/ - UINT64 TxtDprMemoryBase; - -/** Offset 0x0240 - BiosAcmBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 BiosAcmBase; - -/** Offset 0x0244 - BiosAcmSize - Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable -**/ - UINT32 BiosAcmSize; - -/** Offset 0x0248 - ApStartupBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 ApStartupBase; - -/** Offset 0x024C - TgaSize - Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable -**/ - UINT32 TgaSize; - -/** Offset 0x0250 - TxtLcpPdBase - Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable -**/ - UINT64 TxtLcpPdBase; - -/** Offset 0x0258 - TxtLcpPdSize - Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable -**/ - UINT64 TxtLcpPdSize; - -/** Offset 0x0260 - IsTPMPresence - IsTPMPresence default values -**/ - UINT8 IsTPMPresence; - -/** Offset 0x0261 - ReservedSecurityPreMem - Reserved for Security Pre-Mem - $EN_DIS -**/ - UINT8 ReservedSecurityPreMem[3]; - -/** Offset 0x0264 - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddress[3]; - -/** Offset 0x0270 - Enable PCH HSIO PCIE Rx Set Ctle - Enable PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtleEnable[24]; - -/** Offset 0x0288 - PCH HSIO PCIE Rx Set Ctle Value - PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtle[24]; - -/** Offset 0x02A0 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; - -/** Offset 0x02B8 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; - -/** Offset 0x02D0 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; - -/** Offset 0x02E8 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; - -/** Offset 0x0300 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; - -/** Offset 0x0318 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; - -/** Offset 0x0330 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; - -/** Offset 0x0348 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value - PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen1DeEmph[24]; - -/** Offset 0x0360 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; - -/** Offset 0x0378 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; - -/** Offset 0x0390 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; - -/** Offset 0x03A8 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; - -/** Offset 0x03C0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; - -/** Offset 0x03C8 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen1EqBoostMag[8]; - -/** Offset 0x03D0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; - -/** Offset 0x03D8 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen2EqBoostMag[8]; - -/** Offset 0x03E0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; - -/** Offset 0x03E8 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen3EqBoostMag[8]; - -/** Offset 0x03F0 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; - -/** Offset 0x03F8 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmp[8]; - -/** Offset 0x0400 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; - -/** Offset 0x0408 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmp[8]; - -/** Offset 0x0410 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; - -/** Offset 0x0418 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmp[8]; - -/** Offset 0x0420 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DeEmphEnable[8]; - -/** Offset 0x0428 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen1DeEmph[8]; - -/** Offset 0x0430 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DeEmphEnable[8]; - -/** Offset 0x0438 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen2DeEmph[8]; - -/** Offset 0x0440 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DeEmphEnable[8]; - -/** Offset 0x0448 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen3DeEmph[8]; - -/** Offset 0x0450 - PCH LPC Enhance the port 8xh decoding - Original LPC only decodes one byte of port 80h. - $EN_DIS -**/ - UINT8 PchLpcEnhancePort8xhDecoding; - -/** Offset 0x0451 - PCH Port80 Route - Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. - $EN_DIS -**/ - UINT8 PchPort80Route; - -/** Offset 0x0452 - Enable SMBus ARP support - Enable SMBus ARP support. - $EN_DIS -**/ - UINT8 SmbusArpEnable; - -/** Offset 0x0453 - Number of RsvdSmbusAddressTable. - The number of elements in the RsvdSmbusAddressTable. -**/ - UINT8 PchNumRsvdSmbusAddresses; - -/** Offset 0x0454 - SMBUS Base Address - SMBUS Base Address (IO space). -**/ - UINT16 PchSmbusIoBase; - -/** Offset 0x0456 - Size of PCIe IMR. - Size of PCIe IMR in megabytes -**/ - UINT16 PcieImrSize; - -/** Offset 0x0458 - Point of RsvdSmbusAddressTable - Array of addresses reserved for non-ARP-capable SMBus devices. -**/ - UINT32 RsvdSmbusAddressTablePtr; - -/** Offset 0x045C - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpEnableMask; - -/** Offset 0x0460 - Enable PCIe IMR - 0:Disable, 1:Enable - $EN_DIS -**/ - UINT8 PcieImrEnabled; - -/** Offset 0x0461 - Root port number for IMR. - Root port number for IMR. -**/ - UINT8 ImrRpSelection; - -/** Offset 0x0462 - Enable SMBus Alert Pin - Enable SMBus Alert Pin. - $EN_DIS -**/ - UINT8 PchSmbAlertEnable; - -/** Offset 0x0463 - ReservedPchPreMem - Reserved for Pch Pre-Mem - $EN_DIS -**/ - UINT8 ReservedPchPreMem[13]; - -/** Offset 0x0470 - Debug Interfaces - Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, - BIT2 - Not used. -**/ - UINT8 PcdDebugInterfaceFlags; - -/** Offset 0x0471 - PcdSerialIoUartNumber - Select SerialIo Uart Controller for debug. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 -**/ - UINT8 PcdSerialIoUartNumber; - -/** Offset 0x0472 - ISA Serial Base selection - Select ISA Serial Base address. Default is 0x3F8. - 0:0x3F8, 1:0x2F8 -**/ - UINT8 PcdIsaSerialUartBase; - -/** Offset 0x0473 - GT PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 GtPllVoltageOffset; - -/** Offset 0x0474 - Ring PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 RingPllVoltageOffset; - -/** Offset 0x0475 - System Agent PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 SaPllVoltageOffset; - -/** Offset 0x0476 - Memory Controller PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 McPllVoltageOffset; - -/** Offset 0x0477 - MRC Safe Config - Enables/Disable MRC Safe Config - $EN_DIS -**/ - UINT8 MrcSafeConfig; - -/** Offset 0x0478 - PcdSerialDebugBaudRate - Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. - 3:9600, 4:19200, 6:56700, 7:115200 -**/ - UINT8 PcdSerialDebugBaudRate; - -/** Offset 0x0479 - HobBufferSize - Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB - total HOB size). - 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value -**/ - UINT8 HobBufferSize; - -/** Offset 0x047A - Early Command Training - Enables/Disable Early Command Training - $EN_DIS -**/ - UINT8 ECT; - -/** Offset 0x047B - SenseAmp Offset Training - Enables/Disable SenseAmp Offset Training - $EN_DIS -**/ - UINT8 SOT; - -/** Offset 0x047C - Early ReadMPR Timing Centering 2D - Enables/Disable Early ReadMPR Timing Centering 2D - $EN_DIS -**/ - UINT8 ERDMPRTC2D; - -/** Offset 0x047D - Read MPR Training - Enables/Disable Read MPR Training - $EN_DIS -**/ - UINT8 RDMPRT; - -/** Offset 0x047E - Receive Enable Training - Enables/Disable Receive Enable Training - $EN_DIS -**/ - UINT8 RCVET; - -/** Offset 0x047F - Jedec Write Leveling - Enables/Disable Jedec Write Leveling - $EN_DIS -**/ - UINT8 JWRL; - -/** Offset 0x0480 - Early Write Time Centering 2D - Enables/Disable Early Write Time Centering 2D - $EN_DIS -**/ - UINT8 EWRTC2D; - -/** Offset 0x0481 - Early Read Time Centering 2D - Enables/Disable Early Read Time Centering 2D - $EN_DIS -**/ - UINT8 ERDTC2D; - -/** Offset 0x0482 - Write Timing Centering 1D - Enables/Disable Write Timing Centering 1D - $EN_DIS -**/ - UINT8 WRTC1D; - -/** Offset 0x0483 - Write Voltage Centering 1D - Enables/Disable Write Voltage Centering 1D - $EN_DIS -**/ - UINT8 WRVC1D; - -/** Offset 0x0484 - Read Timing Centering 1D - Enables/Disable Read Timing Centering 1D - $EN_DIS -**/ - UINT8 RDTC1D; - -/** Offset 0x0485 - Dimm ODT Training - Enables/Disable Dimm ODT Training - $EN_DIS -**/ - UINT8 DIMMODTT; - -/** Offset 0x0486 - DIMM RON Training - Enables/Disable DIMM RON Training - $EN_DIS -**/ - UINT8 DIMMRONT; - -/** Offset 0x0487 - Write Drive Strength/Equalization 2D - Enables/Disable Write Drive Strength/Equalization 2D - $EN_DIS -**/ - UINT8 WRDSEQT; - -/** Offset 0x0488 - Write Slew Rate Training - Enables/Disable Write Slew Rate Training - $EN_DIS -**/ - UINT8 WRSRT; - -/** Offset 0x0489 - Read ODT Training - Enables/Disable Read ODT Training - $EN_DIS -**/ - UINT8 RDODTT; - -/** Offset 0x048A - Read Equalization Training - Enables/Disable Read Equalization Training - $EN_DIS -**/ - UINT8 RDEQT; - -/** Offset 0x048B - Read Amplifier Training - Enables/Disable Read Amplifier Training - $EN_DIS -**/ - UINT8 RDAPT; - -/** Offset 0x048C - Write Timing Centering 2D - Enables/Disable Write Timing Centering 2D - $EN_DIS -**/ - UINT8 WRTC2D; - -/** Offset 0x048D - Read Timing Centering 2D - Enables/Disable Read Timing Centering 2D - $EN_DIS -**/ - UINT8 RDTC2D; - -/** Offset 0x048E - Write Voltage Centering 2D - Enables/Disable Write Voltage Centering 2D - $EN_DIS -**/ - UINT8 WRVC2D; - -/** Offset 0x048F - Read Voltage Centering 2D - Enables/Disable Read Voltage Centering 2D - $EN_DIS -**/ - UINT8 RDVC2D; - -/** Offset 0x0490 - Command Voltage Centering - Enables/Disable Command Voltage Centering - $EN_DIS -**/ - UINT8 CMDVC; - -/** Offset 0x0491 - Late Command Training - Enables/Disable Late Command Training - $EN_DIS -**/ - UINT8 LCT; - -/** Offset 0x0492 - Round Trip Latency Training - Enables/Disable Round Trip Latency Training - $EN_DIS -**/ - UINT8 RTL; - -/** Offset 0x0493 - Turn Around Timing Training - Enables/Disable Turn Around Timing Training - $EN_DIS -**/ - UINT8 TAT; - -/** Offset 0x0494 - Memory Test - Enables/Disable Memory Test - $EN_DIS -**/ - UINT8 MEMTST; - -/** Offset 0x0495 - DIMM SPD Alias Test - Enables/Disable DIMM SPD Alias Test - $EN_DIS -**/ - UINT8 ALIASCHK; - -/** Offset 0x0496 - Receive Enable Centering 1D - Enables/Disable Receive Enable Centering 1D - $EN_DIS -**/ - UINT8 RCVENC1D; - -/** Offset 0x0497 - Retrain Margin Check - Enables/Disable Retrain Margin Check - $EN_DIS -**/ - UINT8 RMC; - -/** Offset 0x0498 - Write Drive Strength Up/Dn independently - Enables/Disable Write Drive Strength Up/Dn independently - $EN_DIS -**/ - UINT8 WRDSUDT; - -/** Offset 0x0499 - ECC Support - Enables/Disable ECC Support - $EN_DIS -**/ - UINT8 EccSupport; - -/** Offset 0x049A - Memory Remap - Enables/Disable Memory Remap - $EN_DIS -**/ - UINT8 RemapEnable; - -/** Offset 0x049B - Rank Interleave support - Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at - the same time. - $EN_DIS -**/ - UINT8 RankInterleave; - -/** Offset 0x049C - Enhanced Interleave support - Enables/Disable Enhanced Interleave support - $EN_DIS -**/ - UINT8 EnhancedInterleave; - -/** Offset 0x049D - Memory Trace - Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of - equal size. This option may change TOLUD and REMAP values as needed. - $EN_DIS -**/ - UINT8 MemoryTrace; - -/** Offset 0x049E - Ch Hash Support - Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode - $EN_DIS -**/ - UINT8 ChHashEnable; - -/** Offset 0x049F - Extern Therm Status - Enables/Disable Extern Therm Status - $EN_DIS -**/ - UINT8 EnableExtts; - -/** Offset 0x04A0 - Closed Loop Therm Manage - Enables/Disable Closed Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableCltm; - -/** Offset 0x04A1 - Open Loop Therm Manage - Enables/Disable Open Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableOltm; - -/** Offset 0x04A2 - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter - $EN_DIS -**/ - UINT8 EnablePwrDn; - -/** Offset 0x04A3 - DDR PowerDown and idle counter - LPDDR - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) - $EN_DIS -**/ - UINT8 EnablePwrDnLpddr; - -/** Offset 0x04A4 - Use user provided power weights, scale factor, and channel power floor values - Enables/Disable Use user provided power weights, scale factor, and channel power - floor values - $EN_DIS -**/ - UINT8 UserPowerWeightsEn; - -/** Offset 0x04A5 - RAPL PL Lock - Enables/Disable RAPL PL Lock - $EN_DIS -**/ - UINT8 RaplLim2Lock; - -/** Offset 0x04A6 - RAPL PL 2 enable - Enables/Disable RAPL PL 2 enable - $EN_DIS -**/ - UINT8 RaplLim2Ena; - -/** Offset 0x04A7 - RAPL PL 1 enable - Enables/Disable RAPL PL 1 enable - $EN_DIS -**/ - UINT8 RaplLim1Ena; - -/** Offset 0x04A8 - SelfRefresh Enable - Enables/Disable SelfRefresh Enable - $EN_DIS -**/ - UINT8 SrefCfgEna; - -/** Offset 0x04A9 - Throttler CKEMin Defeature - LPDDR - Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeatLpddr; - -/** Offset 0x04AA - Throttler CKEMin Defeature - Enables/Disable Throttler CKEMin Defeature - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeat; - -/** Offset 0x04AB - Enable RH Prevention - Enables/Disable RH Prevention - $EN_DIS -**/ - UINT8 RhPrevention; - -/** Offset 0x04AC - Exit On Failure (MRC) - Enables/Disable Exit On Failure (MRC) - $EN_DIS -**/ - UINT8 ExitOnFailure; - -/** Offset 0x04AD - LPDDR Thermal Sensor - Enables/Disable LPDDR Thermal Sensor - $EN_DIS -**/ - UINT8 DdrThermalSensor; - -/** Offset 0x04AE - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedClock; - -/** Offset 0x04AF - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedZq; - -/** Offset 0x04B0 - Ch Hash Mask - Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to - BITS [19:6 -**/ - UINT16 ChHashMask; - -/** Offset 0x04B2 - Base reference clock value - Base reference clock value, in Hertz(Default is 125Hz) - 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz -**/ - UINT32 BClkFrequency; - -/** Offset 0x04B6 - Ch Hash Interleaved Bit - Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave - the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 - 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 -**/ - UINT8 ChHashInterleaveBit; - -/** Offset 0x04B7 - Energy Scale Factor - Energy Scale Factor, Default is 4 -**/ - UINT8 EnergyScaleFact; - -/** Offset 0x04B8 - EPG DIMM Idd3N - Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on - a per DIMM basis. Default is 26 -**/ - UINT16 Idd3n; - -/** Offset 0x04BA - EPG DIMM Idd3P - Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated - on a per DIMM basis. Default is 11 -**/ - UINT16 Idd3p; - -/** Offset 0x04BC - CMD Slew Rate Training - Enable/Disable CMD Slew Rate Training - $EN_DIS -**/ - UINT8 CMDSR; - -/** Offset 0x04BD - CMD Drive Strength and Tx Equalization - Enable/Disable CMD Drive Strength and Tx Equalization - $EN_DIS -**/ - UINT8 CMDDSEQ; - -/** Offset 0x04BE - CMD Normalization - Enable/Disable CMD Normalization - $EN_DIS -**/ - UINT8 CMDNORM; - -/** Offset 0x04BF - Early DQ Write Drive Strength and Equalization Training - Enable/Disable Early DQ Write Drive Strength and Equalization Training - $EN_DIS -**/ - UINT8 EWRDSEQ; - -/** Offset 0x04C0 - RH Activation Probability - RH Activation Probability, Probability value is 1/2^(inputvalue) -**/ - UINT8 RhActProbability; - -/** Offset 0x04C1 - RAPL PL 2 WindowX - Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def) -**/ - UINT8 RaplLim2WindX; - -/** Offset 0x04C2 - RAPL PL 2 WindowY - Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def) -**/ - UINT8 RaplLim2WindY; - -/** Offset 0x04C3 - RAPL PL 1 WindowX - Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindX; - -/** Offset 0x04C4 - RAPL PL 1 WindowY - Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindY; - -/** Offset 0x04C5 - RAPL PL 2 Power - range[0;2^14-1]= [2047.875;0]in W, (222= Def) -**/ - UINT16 RaplLim2Pwr; - -/** Offset 0x04C7 - RAPL PL 1 Power - range[0;2^14-1]= [2047.875;0]in W, (0= Def) -**/ - UINT16 RaplLim1Pwr; - -/** Offset 0x04C9 - Warm Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh0Dimm0; - -/** Offset 0x04CA - Warm Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh0Dimm1; - -/** Offset 0x04CB - Warm Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh1Dimm0; - -/** Offset 0x04CC - Warm Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh1Dimm1; - -/** Offset 0x04CD - Hot Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh0Dimm0; - -/** Offset 0x04CE - Hot Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh0Dimm1; - -/** Offset 0x04CF - Hot Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh1Dimm0; - -/** Offset 0x04D0 - Hot Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh1Dimm1; - -/** Offset 0x04D1 - Warm Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm0; - -/** Offset 0x04D2 - Warm Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm1; - -/** Offset 0x04D3 - Warm Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm0; - -/** Offset 0x04D4 - Warm Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm1; - -/** Offset 0x04D5 - Hot Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm0; - -/** Offset 0x04D6 - Hot Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm1; - -/** Offset 0x04D7 - Hot Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm0; - -/** Offset 0x04D8 - Hot Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm1; - -/** Offset 0x04D9 - Idle Energy Ch0Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm0; - -/** Offset 0x04DA - Idle Energy Ch0Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm1; - -/** Offset 0x04DB - Idle Energy Ch1Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm0; - -/** Offset 0x04DC - Idle Energy Ch1Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm1; - -/** Offset 0x04DD - PowerDown Energy Ch0Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm0; - -/** Offset 0x04DE - PowerDown Energy Ch0Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm1; - -/** Offset 0x04DF - PowerDown Energy Ch1Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm0; - -/** Offset 0x04E0 - PowerDown Energy Ch1Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm1; - -/** Offset 0x04E1 - Activate Energy Ch0Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm0; - -/** Offset 0x04E2 - Activate Energy Ch0Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm1; - -/** Offset 0x04E3 - Activate Energy Ch1Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm0; - -/** Offset 0x04E4 - Activate Energy Ch1Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm1; - -/** Offset 0x04E5 - Read Energy Ch0Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm0; - -/** Offset 0x04E6 - Read Energy Ch0Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm1; - -/** Offset 0x04E7 - Read Energy Ch1Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm0; - -/** Offset 0x04E8 - Read Energy Ch1Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm1; - -/** Offset 0x04E9 - Write Energy Ch0Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm0; - -/** Offset 0x04EA - Write Energy Ch0Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm1; - -/** Offset 0x04EB - Write Energy Ch1Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm0; - -/** Offset 0x04EC - Write Energy Ch1Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm1; - -/** Offset 0x04ED - Throttler CKEMin Timer - Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). - Default is 0x30 -**/ - UINT8 ThrtCkeMinTmr; - -/** Offset 0x04EE - Cke Rank Mapping - Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies - which rank CKE[i] goes to. -**/ - UINT8 CkeRankMapping; - -/** Offset 0x04EF - Rapl Power Floor Ch0 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh0; - -/** Offset 0x04F0 - Rapl Power Floor Ch1 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh1; - -/** Offset 0x04F1 - Command Rate Support - CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs - 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS -**/ - UINT8 EnCmdRate; - -/** Offset 0x04F2 - REFRESH_2X_MODE - 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot - 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only -**/ - UINT8 Refresh2X; - -/** Offset 0x04F3 - Energy Performance Gain - Enable/disable(default) Energy Performance Gain. - $EN_DIS -**/ - UINT8 EpgEnable; - -/** Offset 0x04F4 - Row Hammer Solution - Type of method used to prevent Row Hammer. Default is Hardware RHP - 0:Hardware RHP, 1:2x Refresh -**/ - UINT8 RhSolution; - -/** Offset 0x04F5 - User Manual Threshold - Disabled: Predefined threshold will be used.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserThresholdEnable; - -/** Offset 0x04F6 - User Manual Budget - Disabled: Configuration of memories will defined the Budget value.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserBudgetEnable; - -/** Offset 0x04F7 - TcritMax - Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax - has to be greater than THIGHMax .\n - Critical temperature will be TcritMax -**/ - UINT8 TsodTcritMax; - -/** Offset 0x04F8 - Event mode - Disable:Comparator mode.\n - Enable:Interrupt mode - $EN_DIS -**/ - UINT8 TsodEventMode; - -/** Offset 0x04F9 - EVENT polarity - Disable:Active LOW.\n - Enable:Active HIGH - $EN_DIS -**/ - UINT8 TsodEventPolarity; - -/** Offset 0x04FA - Critical event only - Disable:Trips on alarm or critical.\n - Enable:Trips only if criticaal temperature is reached - $EN_DIS -**/ - UINT8 TsodCriticalEventOnly; - -/** Offset 0x04FB - Event output control - Disable:Event output disable.\n - Enable:Event output enabled - $EN_DIS -**/ - UINT8 TsodEventOutputControl; - -/** Offset 0x04FC - Alarm window lock bit - Disable:Alarm trips are not locked and can be changed.\n - Enable:Alarm trips are locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodAlarmwindowLockBit; - -/** Offset 0x04FD - Critical trip lock bit - Disable:Critical trip is not locked and can be changed.\n - Enable:Critical trip is locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodCriticaltripLockBit; - -/** Offset 0x04FE - Shutdown mode - Disable:Temperature sensor enable.\n - Enable:Temperature sensor disable - $EN_DIS -**/ - UINT8 TsodShutdownMode; - -/** Offset 0x04FF - ThighMax - Thigh = ThighMax (Default is 93) -**/ - UINT8 TsodThigMax; - -/** Offset 0x0500 - User Manual Thig and Tcrit - Disabled(Default): Temperature will be given by the configuration of memories and - 1x or 2xrefresh rate.\n - Enabled: User Input will define for Thigh and Tcrit. - $EN_DIS -**/ - UINT8 TsodManualEnable; - -/** Offset 0x0501 - Force OLTM or 2X Refresh when needed - Disabled(Default): = Force OLTM.\n - Enabled: = Force 2x Refresh. - $EN_DIS -**/ - UINT8 ForceOltmOrRefresh2x; - -/** Offset 0x0502 - Pwr Down Idle Timer - The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means - AUTO: 64 for ULX/ULT, 128 for DT/Halo -**/ - UINT8 PwdwnIdleCounter; - -/** Offset 0x0503 - Bitmask of ranks that have CA bus terminated - Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, - Rank0 is terminating and Rank1 is non-terminating</b> -**/ - UINT8 CmdRanksTerminated; - -/** Offset 0x0504 - GDXC MOT enable - GDXC MOT enable. - $EN_DIS -**/ - UINT8 GdxcEnable; - -/** Offset 0x0505 - PcdSerialDebugLevel - Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info, 5:Load Error Warnings Info and Verbose -**/ - UINT8 PcdSerialDebugLevel; - -/** Offset 0x0506 - Fivr Faults - Fivr Faults; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrFaults; - -/** Offset 0x0507 - Fivr Efficiency - Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrEfficiency; - -/** Offset 0x0508 - Safe Mode Support - This option configures the varous items in the IO and MC to be more conservative.(def=Disable) - $EN_DIS -**/ - UINT8 SafeMode; - -/** Offset 0x0509 - Ask MRC to clear memory content - Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. - $EN_DIS -**/ - UINT8 CleanMemory; - -/** Offset 0x050A - LpDdrDqDqsReTraining - Enables/Disable LpDdrDqDqsReTraining - $EN_DIS -**/ - UINT8 LpDdrDqDqsReTraining; - -/** Offset 0x050B - Post Code Output Port - This option configures Post Code Output Port -**/ - UINT16 PostCodeOutputPort; - -/** Offset 0x050D - RMTLoopCount - Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO -**/ - UINT8 RMTLoopCount; - -/** Offset 0x050E - BER Support - Enable/Disable the Rank Margin Tool interpolation/extrapolation. - 0:Disable, 1:Enable -**/ - UINT8 EnBER; - -/** Offset 0x050F - PEG IMR support - This option configures the IMR support for PEG.(def=Disable) - $EN_DIS -**/ - UINT8 PegImrEnable; - -/** Offset 0x0510 - PEG IMR size - The size of IMR to be allocated for PEG EndPoint device.PegImrSize can vary from - 0 to 1024 MB in steps of 2 power N where N = 0 to 10 -**/ - UINT16 PegImrSize; - -/** Offset 0x0512 - PEG Root Port Selection - The Root Port for which the IMR to be allocated -**/ - UINT8 PegImrRpSelection; - -/** Offset 0x0513 - Memory Test on Warm Boot - Run Base Memory Test on Warm Boot - 0:Disable, 1:Enable -**/ - UINT8 MemTestOnWarmBoot; - -/** Offset 0x0514 - Throttler CKEMin Timer - LPDDR - Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T + - BYTE_LENGTH (4). Default is 0x40 -**/ - UINT8 ThrtCkeMinTmrLpddr; - -/** Offset 0x0515 - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOut; - -/** Offset 0x0516 - MRC Force training on Warm - Enables/Disable the MRC training on warm boot - $EN_DIS -**/ - UINT8 MrcTrainOnWarm; - -/** Offset 0x0517 -**/ - UINT8 ReservedFspmUpd[8]; -} FSP_M_CONFIG; - -/** Fsp M Test Configuration -**/ -typedef struct { - -/** Offset 0x0520 -**/ - UINT32 Signature; - -/** Offset 0x0524 - Skip external display device scanning - Enable: Do not scan for external display device, Disable (Default): Scan external - display devices - $EN_DIS -**/ - UINT8 SkipExtGfxScan; - -/** Offset 0x0525 - Generate BIOS Data ACPI Table - Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it - $EN_DIS -**/ - UINT8 BdatEnable; - -/** Offset 0x0526 - Detect External Graphics device for LegacyOpROM - Detect and report if external graphics device only support LegacyOpROM or not (to - support CSM auto-enable). Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 ScanExtGfxForLegacyOpRom; - -/** Offset 0x0527 - Lock PCU Thermal Management registers - Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 LockPTMregs; - -/** Offset 0x0528 - DMI Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 DmiMaxLinkSpeed; - -/** Offset 0x0529 - DMI Equalization Phase 2 - DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): - AUTO - Use the current default method - 0:Disable phase2, 1:Enable phase2, 2:Auto -**/ - UINT8 DmiGen3EqPh2Enable; - -/** Offset 0x052A - DMI Gen3 Equalization Phase3 - DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 DmiGen3EqPh3Method; - -/** Offset 0x052B - Phase2 EQ enable on the PEG 0:1:0. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg0Gen3EqPh2Enable; - -/** Offset 0x052C - Phase2 EQ enable on the PEG 0:1:1. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg1Gen3EqPh2Enable; - -/** Offset 0x052D - Phase2 EQ enable on the PEG 0:1:2. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg2Gen3EqPh2Enable; - -/** Offset 0x052E - Phase2 EQ enable on the PEG 0:1:3. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg3Gen3EqPh2Enable; - -/** Offset 0x052F - Phase3 EQ method on the PEG 0:1:0. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg0Gen3EqPh3Method; - -/** Offset 0x0530 - Phase3 EQ method on the PEG 0:1:1. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg1Gen3EqPh3Method; - -/** Offset 0x0531 - Phase3 EQ method on the PEG 0:1:2. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg2Gen3EqPh3Method; - -/** Offset 0x0532 - Phase3 EQ method on the PEG 0:1:3. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg3Gen3EqPh3Method; - -/** Offset 0x0533 - Enable/Disable PEG GEN3 Static EQ Phase1 programming - Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 PegGen3ProgramStaticEq; - -/** Offset 0x0534 - PEG Gen3 SwEq Always Attempt - Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): - Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test - and generate new EQ values every boot, not recommended - 0:Disable, 1:Enable -**/ - UINT8 Gen3SwEqAlwaysAttempt; - -/** Offset 0x0535 - Select number of TxEq presets to test in the PCIe/DMI SwEq - Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test - Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the - current default method (Default)Auto will test Presets 7, 3, and 5. It is possible - for this default to change over time;using Auto will ensure Reference Code always - uses the latest default settings - 0:P7 P3 P5, 1:P0 to P9, 2:Auto -**/ - UINT8 Gen3SwEqNumberOfPresets; - -/** Offset 0x0536 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq - Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization - Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): - Use the current default - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Gen3SwEqEnableVocTest; - -/** Offset 0x0537 - PCIe Rx Compliance Testing Mode - Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): - PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; - it should only be set when doing PCIe compliance testing - $EN_DIS -**/ - UINT8 PegRxCemTestingMode; - -/** Offset 0x0538 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled - the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 -**/ - UINT8 PegRxCemLoopbackLane; - -/** Offset 0x0539 - Generate PCIe BDAT Margin Table - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin - data generation, Enable(0x1): Generate PCIe BDAT margin data - $EN_DIS -**/ - UINT8 PegGenerateBdatMarginTable; - -/** Offset 0x053A - PCIe Non-Protocol Awareness for Rx Compliance Testing - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, - Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for - compliance testing - $EN_DIS -**/ - UINT8 PegRxCemNonProtocolAwareness; - -/** Offset 0x053B - PCIe Override RxCTLE - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3RxCtleOverride; - -/** Offset 0x053C - Rsvd - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3Rsvd; - -/** Offset 0x053D - PEG Gen3 Root port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 PegGen3RootPortPreset[20]; - -/** Offset 0x0551 - PEG Gen3 End port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 PegGen3EndPointPreset[20]; - -/** Offset 0x0565 - PEG Gen3 End port Hint values per lane - Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 PegGen3EndPointHint[20]; - -/** Offset 0x0579 -**/ - UINT8 UnusedUpdSpace8; - -/** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterDwellTime; - -/** Offset 0x057C - Jitter Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterErrorTarget; - -/** Offset 0x057E - VOC Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 10000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocDwellTime; - -/** Offset 0x0580 - VOC Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 2. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocErrorTarget; - -/** Offset 0x0582 - Panel Power Enable - Control for enabling/disabling VDD force bit (Required only for early enabling of - eDP panel). 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 PanelPowerEnable; - -/** Offset 0x0583 - BdatTestType - Indicates the type of Memory Training data to populate into the BDAT ACPI table. - 0:Rank Margin Tool, 1:Margin2D -**/ - UINT8 BdatTestType; - -/** Offset 0x0584 - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisable; - -/** Offset 0x0585 - Delta T12 Power Cycle Delay required in ms - Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate - T12 Delay to max 500ms - 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay -**/ - UINT16 DeltaT12PowerCycleDelayPreMem; - -/** Offset 0x0587 - SaPreMemTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SaPreMemTestRsvd[9]; - -/** Offset 0x0590 - TotalFlashSize - Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable -**/ - UINT16 TotalFlashSize; - -/** Offset 0x0592 - BiosSize - Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable -**/ - UINT16 BiosSize; - -/** Offset 0x0594 - TxtAcheckRequest - Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. - $EN_DIS -**/ - UINT8 TxtAcheckRequest; - -/** Offset 0x0595 - SecurityTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SecurityTestRsvd[3]; - -/** Offset 0x0598 - Smbus dynamic power gating - Disable or Enable Smbus dynamic power gating. - $EN_DIS -**/ - UINT8 SmbusDynamicPowerGating; - -/** Offset 0x0599 - Disable and Lock Watch Dog Register - Set 1 to clear WDT status, then disable and lock WDT registers. - $EN_DIS -**/ - UINT8 WdtDisableAndLock; - -/** Offset 0x059A - SMBUS SPD Write Disable - Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write - Disable bit. For security recommendations, SPD write disable bit must be set. - $EN_DIS -**/ - UINT8 SmbusSpdWriteDisable; - -/** Offset 0x059B - ChipsetInit HECI message - DEPRECATED - $EN_DIS -**/ - UINT8 ChipsetInitMessage; - -/** Offset 0x059C - Bypass ChipsetInit sync reset. - DEPRECATED - $EN_DIS -**/ - UINT8 BypassPhySyncReset; - -/** Offset 0x059D - Force ME DID Init Status - Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set - ME DID init stat value - $EN_DIS -**/ - UINT8 DidInitStat; - -/** Offset 0x059E - CPU Replaced Polling Disable - Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop - $EN_DIS -**/ - UINT8 DisableCpuReplacedPolling; - -/** Offset 0x059F - ME DID Message - Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent - the DID message from being sent) - $EN_DIS -**/ - UINT8 SendDidMsg; - -/** Offset 0x05A0 - Retry mechanism for HECI APIs - Test, 0: disable, 1: enable, Enable/Disable HECI retry. - $EN_DIS -**/ - UINT8 DisableHeciRetry; - -/** Offset 0x05A1 - Check HECI message before send - Test, 0: disable, 1: enable, Enable/Disable message check. - $EN_DIS -**/ - UINT8 DisableMessageCheck; - -/** Offset 0x05A2 - Skip MBP HOB - Test, 0: disable, 1: enable, Enable/Disable MOB HOB. - $EN_DIS -**/ - UINT8 SkipMbpHob; - -/** Offset 0x05A3 - HECI2 Interface Communication - Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. - $EN_DIS -**/ - UINT8 HeciCommunication2; - -/** Offset 0x05A4 - Enable KT device - Test, 0: disable, 1: enable, Enable or Disable KT device. - $EN_DIS -**/ - UINT8 KtDeviceEnable; - -/** Offset 0x05A5 - tRd2RdSG - Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdSG; - -/** Offset 0x05A6 - tRd2RdDG - Delay between Read-to-Read commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDG; - -/** Offset 0x05A7 - tRd2RdDR - Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDR; - -/** Offset 0x05A8 - tRd2RdDD - Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDD; - -/** Offset 0x05A9 - tWr2RdSG - Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86. -**/ - UINT8 tWr2RdSG; - -/** Offset 0x05AA - tWr2RdDG - Delay between Write-to-Read commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDG; - -/** Offset 0x05AB - tWr2RdDR - Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDR; - -/** Offset 0x05AC - tWr2RdDD - Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDD; - -/** Offset 0x05AD - tWr2WrSG - Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrSG; - -/** Offset 0x05AE - tWr2WrDG - Delay between Write-to-Write commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDG; - -/** Offset 0x05AF - tWr2WrDR - Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDR; - -/** Offset 0x05B0 - tWr2WrDD - Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDD; - -/** Offset 0x05B1 - tRd2WrSG - Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrSG; - -/** Offset 0x05B2 - tRd2WrDG - Delay between Read-to-Write commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDG; - -/** Offset 0x05B3 - tRd2WrDR - Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDR; - -/** Offset 0x05B4 - tRd2WrDD - Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDD; - -/** Offset 0x05B5 - tRRD_L - Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31 -**/ - UINT8 tRRD_L; - -/** Offset 0x05B6 - tRRD_S - Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0: - AUTO, max: 31 -**/ - UINT8 tRRD_S; - -/** Offset 0x05B7 - tWTR_L - Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0: - AUTO, max: 60 -**/ - UINT8 tWTR_L; - -/** Offset 0x05B8 - tWTR_S - Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only. - 0: AUTO, max: 28 -**/ - UINT8 tWTR_S; - -/** Offset 0x05B9 -**/ - UINT8 ReservedFspmTestUpd[3]; -} FSP_M_TEST_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPM_ARCH_UPD FspmArchUpd; - -/** Offset 0x0040 -**/ - FSP_M_CONFIG FspmConfig; - -/** Offset 0x051F -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x0520 -**/ - FSP_M_TEST_CONFIG FspmTestConfig; - -/** Offset 0x05BC -**/ - UINT32 UpdTerminator; -} FSPM_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h deleted file mode 100644 index c9024eb342..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h +++ /dev/null @@ -1,3331 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -/// -/// Azalia Header structure -/// -typedef struct { - UINT16 VendorId; ///< Codec Vendor ID - UINT16 DeviceId; ///< Codec Device ID - UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. - UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. - UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. - UINT32 Reserved; ///< Reserved for future use. Must be set to 0. -} AZALIA_HEADER; - -/// -/// Audio Azalia Verb Table structure -/// -typedef struct { - AZALIA_HEADER Header; ///< AZALIA PCH header - UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header -} AUDIO_AZALIA_VERB_TABLE; - -/// -/// Refer to the definition of PCH_INT_PIN -/// -typedef enum { - SiPchNoInt, ///< No Interrupt Pin - SiPchIntA, - SiPchIntB, - SiPchIntC, - SiPchIntD -} SI_PCH_INT_PIN; -/// -/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. -/// -typedef struct { - UINT8 Device; ///< Device number - UINT8 Function; ///< Device function - UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) - UINT8 Irq; ///< IRQ to be set for device. -} SI_PCH_DEVICE_INTERRUPT_CONFIG; - -#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices - - -/** Fsp S Configuration -**/ -typedef struct { - -/** Offset 0x0020 - Logo Pointer - Points to PEI Display Logo Image -**/ - UINT32 LogoPtr; - -/** Offset 0x0024 - Logo Size - Size of PEI Display Logo Image -**/ - UINT32 LogoSize; - -/** Offset 0x0028 - Graphics Configuration Ptr - Points to VBT -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x002C - Enable Device 4 - The Device 4 default value is <b>1: Enable</b> for WHL, and <b>0: disable</b> for - all other CPU's - $EN_DIS -**/ - UINT8 Device4Enable; - -/** Offset 0x002D - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. - $EN_DIS -**/ - UINT8 PchHdaDspEnable; - -/** Offset 0x002E -**/ - UINT8 UnusedUpdSpace0[3]; - -/** Offset 0x0031 - Enable eMMC Controller - Enable/disable eMMC Controller. - $EN_DIS -**/ - UINT8 ScsEmmcEnabled; - -/** Offset 0x0032 - Enable eMMC HS400 Mode - Enable eMMC HS400 Mode. - $EN_DIS -**/ - UINT8 ScsEmmcHs400Enabled; - -/** Offset 0x0033 - Enable SdCard Controller - Enable/disable SD Card Controller. - $EN_DIS -**/ - UINT8 ScsSdCardEnabled; - -/** Offset 0x0034 - Show SPI controller - Enable/disable to show SPI controller. - $EN_DIS -**/ - UINT8 ShowSpiController; - -/** Offset 0x0035 -**/ - UINT8 UnusedUpdSpace1[3]; - -/** Offset 0x0038 - MicrocodeRegionBase - Memory Base of Microcode Updates -**/ - UINT32 MicrocodeRegionBase; - -/** Offset 0x003C - MicrocodeRegionSize - Size of Microcode Updates -**/ - UINT32 MicrocodeRegionSize; - -/** Offset 0x0040 - Turbo Mode - Enable/Disable Turbo mode. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 TurboMode; - -/** Offset 0x0041 - Enable SATA SALP Support - Enable/disable SATA Aggressive Link Power Management. - $EN_DIS -**/ - UINT8 SataSalpSupport; - -/** Offset 0x0042 - Enable SATA ports - Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, - and so on. -**/ - UINT8 SataPortsEnable[8]; - -/** Offset 0x004A - Enable SATA DEVSLP Feature - Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each - port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlp[8]; - -/** Offset 0x0052 - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb20Enable[16]; - -/** Offset 0x0062 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb30Enable[10]; - -/** Offset 0x006C - Enable xDCI controller - Enable/disable to xDCI controller. - $EN_DIS -**/ - UINT8 XdciEnable; - -/** Offset 0x006D -**/ - UINT8 UnusedUpdSpace2[2]; - -/** Offset 0x006F - Enable SerialIo Device Mode - 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable - SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device - mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, - and so on. -**/ - UINT8 SerialIoDevMode[12]; - -/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table. - The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. -**/ - UINT32 DevIntConfigPtr; - -/** Offset 0x007F - Number of DevIntConfig Entry - Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr - must not be NULL. -**/ - UINT8 NumOfDevIntConfig; - -/** Offset 0x0080 - PIRQx to IRQx Map Config - PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for - PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy - 8259 PCI mode. -**/ - UINT8 PxRcConfig[8]; - -/** Offset 0x0088 - Select GPIO IRQ Route - GPIO IRQ Select. The valid value is 14 or 15. -**/ - UINT8 GpioIrqRoute; - -/** Offset 0x0089 - Select SciIrqSelect - SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. -**/ - UINT8 SciIrqSelect; - -/** Offset 0x008A - Select TcoIrqSelect - TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. -**/ - UINT8 TcoIrqSelect; - -/** Offset 0x008B - Enable/Disable Tco IRQ - Enable/disable TCO IRQ - $EN_DIS -**/ - UINT8 TcoIrqEnable; - -/** Offset 0x008C - PCH HDA Verb Table Entry Number - Number of Entries in Verb Table. -**/ - UINT8 PchHdaVerbTableEntryNum; - -/** Offset 0x008D - PCH HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. -**/ - UINT32 PchHdaVerbTablePtr; - -/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability - Capability to detect wake initiated by a codec in Sx -**/ - UINT8 PchHdaCodecSxWakeCapability; - -/** Offset 0x0092 - Enable SATA - Enable/disable SATA controller. - $EN_DIS -**/ - UINT8 SataEnable; - -/** Offset 0x0093 - SATA Mode - Select SATA controller working mode. - 0:AHCI, 1:RAID -**/ - UINT8 SataMode; - -/** Offset 0x0094 - USB Per Port HS Preemphasis Bias - USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. -**/ - UINT8 Usb2AfePetxiset[16]; - -/** Offset 0x00A4 - USB Per Port HS Transmitter Bias - USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. -**/ - UINT8 Usb2AfeTxiset[16]; - -/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis - USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, - 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. -**/ - UINT8 Usb2AfePredeemp[16]; - -/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis - USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. - One byte for each port. -**/ - UINT8 Usb2AfePehalfbit[16]; - -/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmphEnable[10]; - -/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], - <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmph[10]; - -/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmpEnable[10]; - -/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment - USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default - = 00h</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmp[10]; - -/** Offset 0x00FC - Enable LAN - Enable/disable LAN controller. - $EN_DIS -**/ - UINT8 PchLanEnable; - -/** Offset 0x00FD - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkHda; - -/** Offset 0x00FE - Enable HD Audio DMIC0 Link - Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic0; - -/** Offset 0x00FF - Enable HD Audio DMIC1 Link - Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic1; - -/** Offset 0x0100 - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp0; - -/** Offset 0x0101 - Enable HD Audio SSP1 Link - Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp1; - -/** Offset 0x0102 - Enable HD Audio SSP2 Link - Enable/disable HD Audio SSP2/I2S link. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp2; - -/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link - Enable/disable HD Audio SNDW1 link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw1; - -/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link - Enable/disable HD Audio SNDW2 link. Muxed with SSP1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw2; - -/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link - Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw3; - -/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link - Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw4; - -/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting - 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. - $EN_DIS -**/ - UINT8 PchHdaSndwBufferRcomp; - -/** Offset 0x0108 - PTM for PCIE RP Mask - Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpPtmMask; - -/** Offset 0x010C - DPC for PCIE RP Mask - Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcMask; - -/** Offset 0x0110 - DPC Extensions PCIE RP Mask - Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit - for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcExtensionsMask; - -/** Offset 0x0114 - USB PDO Programming - Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming - during later phase. 1: enable, 0: disable - $EN_DIS -**/ - UINT8 UsbPdoProgramming; - -/** Offset 0x0115 - Power button debounce configuration - Debounce time for PWRBTN in microseconds. For values not supported by HW, they will - be rounded down to closest supported on. 0: disable, 250-1024000us: supported range -**/ - UINT32 PmcPowerButtonDebounce; - -/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled - PCH eSPI Master and Slave BME enabled - $EN_DIS -**/ - UINT8 PchEspiBmeMasterSlaveEnabled; - -/** Offset 0x011A - PCH SATA use RST Legacy OROM - Use PCH SATA RST Legacy OROM when CSM is Enabled - $EN_DIS -**/ - UINT8 SataRstLegacyOrom; - -/** Offset 0x011B - Trace Hub Memory Base - If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate - trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub - memory is configured properly. -**/ - UINT32 TraceHubMemBase; - -/** Offset 0x011F - PMC Debug Message Enable - When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW - will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix - $EN_DIS -**/ - UINT8 PmcDbgMsgEn; - -/** Offset 0x0120 - Pointer of ChipsetInit Binary - ChipsetInit Binary Pointer. -**/ - UINT32 ChipsetInitBinPtr; - -/** Offset 0x0124 - Length of ChipsetInit Binary - ChipsetInit Binary Length. -**/ - UINT32 ChipsetInitBinLen; - -/** Offset 0x0128 - PchDmiCwbEnable - Central Write Buffer feature configurable and disabled by default - $EN_DIS -**/ - UINT8 PchDmiCwbEnable; - -/** Offset 0x0129 - PchPostMemRsvd - Reserved for PCH Post-Mem - $EN_DIS -**/ - UINT8 PchPostMemRsvd[28]; - -/** Offset 0x0145 - Enable Ufs Controller - Enable/disable Ufs 2.0 Controller. - $EN_DIS -**/ - UINT8 ScsUfsEnabled; - -/** Offset 0x0146 - CNVi Configuration - This option allows for automatic detection of Connectivity Solution. [Auto Detection] - assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. - 0:Disable, 1:Auto -**/ - UINT8 PchCnviMode; - -/** Offset 0x0147 - SdCard power enable polarity - Choose SD_PWREN# polarity - 0: Active low, 1: Active high -**/ - UINT8 SdCardPowerEnableActiveHigh; - -/** Offset 0x0148 - PCH USB2 PHY Power Gating enable - 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY - Sus Well PG - $EN_DIS -**/ - UINT8 PchUsb2PhySusPgEnable; - -/** Offset 0x0149 - PCH USB OverCurrent mapping enable - 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin - mapping allow for NOA usage of OC pins - $EN_DIS -**/ - UINT8 PchUsbOverCurrentEnable; - -/** Offset 0x014A -**/ - UINT8 UnusedUpdSpace3; - -/** Offset 0x014B - CNVi MfUart1 Type - This option configures Uart type which connects to MfUart1 - 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads -**/ - UINT8 PchCnviMfUart1Type; - -/** Offset 0x014C - Espi Lgmr Memory Range decode - This option enables or disables espi lgmr - $EN_DIS -**/ - UINT8 PchEspiLgmrEnable; - -/** Offset 0x014D - HECI3 state - The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. - 0: disable, 1: enable - $EN_DIS -**/ - UINT8 Heci3Enabled; - -/** Offset 0x014E -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x014F - PCHHOT# pin - Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchHotEnable; - -/** Offset 0x0150 - SATA LED - SATA LED indicating SATA controller activity. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 SataLedEnable; - -/** Offset 0x0151 - VRAlert# Pin - When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling - to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmVrAlert; - -/** Offset 0x0152 - SLP_S0 VM Dynamic Control - SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0VmRuntimeControl; - -/** Offset 0x0153 - SLP_S0 VM 0.70V Support - SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm070VSupport; - -/** Offset 0x0154 - SLP_S0 VM 0.75V Support - SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm075VSupport; - -/** Offset 0x0155 - AMT Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. - $EN_DIS -**/ - UINT8 AmtEnabled; - -/** Offset 0x0156 - WatchDog Timer Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. - $EN_DIS -**/ - UINT8 WatchDog; - -/** Offset 0x0157 - ASF Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality. - $EN_DIS -**/ - UINT8 AsfEnabled; - -/** Offset 0x0158 - Manageability Mode set by Mebx - Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. - $EN_DIS -**/ - UINT8 ManageabilityMode; - -/** Offset 0x0159 - PET Progress - Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive - PET Events. - $EN_DIS -**/ - UINT8 FwProgress; - -/** Offset 0x015A - SOL Switch - Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx - $EN_DIS -**/ - UINT8 AmtSolEnabled; - -/** Offset 0x015B - OS Timer - 16 bits Value, Set OS watchdog timer. - $EN_DIS -**/ - UINT16 WatchDogTimerOs; - -/** Offset 0x015D - BIOS Timer - 16 bits Value, Set BIOS watchdog timer. - $EN_DIS -**/ - UINT16 WatchDogTimerBios; - -/** Offset 0x015F - Remote Assistance Trigger Availablilty - Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx - $EN_DIS -**/ - UINT8 RemoteAssistance; - -/** Offset 0x0160 - KVM Switch - Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx - $EN_DIS -**/ - UINT8 AmtKvmEnabled; - -/** Offset 0x0161 - MEBX execution - Enable/Disable. 0: Disable, 1: enable, Force MEBX execution - $EN_DIS -**/ - UINT8 ForcMebxSyncUp; - -/** Offset 0x0162 -**/ - UINT8 UnusedUpdSpace5[1]; - -/** Offset 0x0163 - PCH PCIe root port connection type - 0: built-in device, 1:slot -**/ - UINT8 PcieRpSlotImplemented[24]; - -/** Offset 0x017B - Usage type for ClkSrc - 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use - (free running), 0xFF: not used -**/ - UINT8 PcieClkSrcUsage[16]; - -/** Offset 0x018B - ClkReq-to-ClkSrc mapping - Number of ClkReq signal assigned to ClkSrc -**/ - UINT8 PcieClkSrcClkReq[16]; - -/** Offset 0x019B - PCIE RP Access Control Services Extended Capability - Enable/Disable PCIE RP Access Control Services Extended Capability -**/ - UINT8 PcieRpAcsEnabled[24]; - -/** Offset 0x01B3 - PCIE RP Clock Power Management - Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal - can still be controlled by L1 PM substates mechanism -**/ - UINT8 PcieRpEnableCpm[24]; - -/** Offset 0x01CB - PCIE RP Detect Timeout Ms - The number of milliseconds within 0~65535 in reference code will wait for link to - exit Detect state for enabled ports before assuming there is no device and potentially - disabling the port. -**/ - UINT16 PcieRpDetectTimeoutMs[24]; - -/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating - Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on - PCH-H. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcModPhySusPgEnable; - -/** Offset 0x01FC - SlpS0WithGbeSupport - Enable/Disable SLP_S0 with GBE Support. Default is 0 when paired with WHL V0 stepping - CPU and 1 for all other CPUs. 0: Disable, 1: Enable - $EN_DIS -**/ - UINT8 SlpS0WithGbeSupport; - -/** Offset 0x01FD -**/ - UINT8 UnusedUpdSpace6[3]; - -/** Offset 0x0200 - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS -**/ - UINT8 CridEnable; - -/** Offset 0x0201 - DMI ASPM - 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 - 0:Disable, 1:L0s, 2:L1, 3:L0sL1 -**/ - UINT8 DmiAspm; - -/** Offset 0x0202 - PCIe DeEmphasis control per root port - 0: -6dB, 1(Default): -3.5dB - 0:-6dB, 1:-3.5dB -**/ - UINT8 PegDeEmphasis[4]; - -/** Offset 0x0206 - PCIe Slot Power Limit value per root port - Slot power limit value per root port -**/ - UINT8 PegSlotPowerLimitValue[4]; - -/** Offset 0x020A - PCIe Slot Power Limit scale per root port - Slot power limit scale per root port - 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x -**/ - UINT8 PegSlotPowerLimitScale[4]; - -/** Offset 0x020E - PCIe Physical Slot Number per root port - Physical Slot Number per root port -**/ - UINT16 PegPhysicalSlotNumber[4]; - -/** Offset 0x0216 - Enable/Disable PavpEnable - Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable - $EN_DIS -**/ - UINT8 PavpEnable; - -/** Offset 0x0217 - CdClock Frequency selection - 0=168 Mhz, 1=336 Mhz, 2(Default)=528 Mhz - 0: 168 Mhz, 1: 336 Mhz, 2: 528 Mhz -**/ - UINT8 CdClock; - -/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit - Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit - $EN_DIS -**/ - UINT8 PeiGraphicsPeimInit; - -/** Offset 0x0219 -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x021A - Enable or disable GNA device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 GnaEnable; - -/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOutDeprecated; - -/** Offset 0x021C - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddressDeprecated[3]; - -/** Offset 0x0228 - Enable or disable eDP device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortEdp; - -/** Offset 0x0229 - Enable or disable HPD of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBHpd; - -/** Offset 0x022A - Enable or disable HPD of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCHpd; - -/** Offset 0x022B - Enable or disable HPD of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDHpd; - -/** Offset 0x022C - Enable or disable HPD of DDI port F - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortFHpd; - -/** Offset 0x022D - Enable or disable DDC of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBDdc; - -/** Offset 0x022E - Enable or disable DDC of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCDdc; - -/** Offset 0x022F - Enable or disable DDC of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDDdc; - -/** Offset 0x0230 - Enable or disable DDC of DDI port F - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortFDdc; - -/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit - Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full - CD clock in S3 resume due to GOP absent - $EN_DIS -**/ - UINT8 SkipS3CdClockInit; - -/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms - DEPRECATED - 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay -**/ - UINT16 DeltaT12PowerCycleDelay; - -/** Offset 0x0234 - Blt Buffer Address - Address of Blt buffer -**/ - UINT32 BltBufferAddress; - -/** Offset 0x0238 - Blt Buffer Size - Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of - EFI_GRAPHICS_OUTPUT_BLT_PIXEL) -**/ - UINT32 BltBufferSize; - -/** Offset 0x023C - SaPostMemProductionRsvd - Reserved for SA Post-Mem Production - $EN_DIS -**/ - UINT8 SaPostMemProductionRsvd[35]; - -/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for - Alpine ridge -**/ - UINT8 PcieRootPortGen2PllL1CgDisable[24]; - -/** Offset 0x0277 - Advanced Encryption Standard (AES) feature - Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable - $EN_DIS -**/ - UINT8 AesEnable; - -/** Offset 0x0278 - Power State 3 enable/disable - PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. - For all VR Indexes -**/ - UINT8 Psi3Enable[5]; - -/** Offset 0x027D - Power State 4 enable/disable - PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For - all VR Indexes -**/ - UINT8 Psi4Enable[5]; - -/** Offset 0x0282 - Imon slope correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes -**/ - UINT8 ImonSlope[5]; - -/** Offset 0x0287 - Imon offset correction - DEPRECATED -**/ - UINT8 ImonOffset[5]; - -/** Offset 0x028C - Enable/Disable BIOS configuration of VR - Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes -**/ - UINT8 VrConfigEnable[5]; - -/** Offset 0x0291 - Thermal Design Current enable/disable - PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: - Enable.For all VR Indexes -**/ - UINT8 TdcEnable[5]; - -/** Offset 0x0296 - HECI3 state - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms - , 8 - 8ms , 10 - 10ms.For all VR Indexe -**/ - UINT8 TdcTimeWindow[5]; - -/** Offset 0x029B - Thermal Design Current Lock - PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For - all VR Indexes -**/ - UINT8 TdcLock[5]; - -/** Offset 0x02A0 - Platform Psys slope correction - PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in - 1/100 increment values. Range is 0-200. 125 = 1.25 -**/ - UINT8 PsysSlope; - -/** Offset 0x02A1 - Platform Psys offset correction - PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4, - Range 0-255. Value of 100 = 100/4 = 25 offset -**/ - UINT8 PsysOffset; - -/** Offset 0x02A2 - Acoustic Noise Mitigation feature - Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program - slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0: - Disabled</b>; 1: Enabled - $EN_DIS -**/ - UINT8 AcousticNoiseMitigation; - -/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableIa; - -/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain - Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForIa; - -/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain - Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForGt; - -/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain - Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForSa; - -/** Offset 0x02A7 - Thermal Design Current current limit - PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. - Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes -**/ - UINT16 TdcPowerLimit[5]; - -/** Offset 0x02B1 - AcLoadline - PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. -**/ - UINT16 AcLoadline[5]; - -/** Offset 0x02BB -**/ - UINT8 UnusedUpdSpace8[10]; - -/** Offset 0x02C5 - DcLoadline - PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> -**/ - UINT16 DcLoadline[5]; - -/** Offset 0x02CF - Power State 1 Threshold current - PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi1Threshold[5]; - -/** Offset 0x02D9 - Power State 2 Threshold current - PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi2Threshold[5]; - -/** Offset 0x02E3 - Power State 3 Threshold current - PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi3Threshold[5]; - -/** Offset 0x02ED - Icc Max limit - PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A -**/ - UINT16 IccMax[5]; - -/** Offset 0x02F7 - VR Voltage Limit - PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. -**/ - UINT16 VrVoltageLimit[5]; - -/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableGt; - -/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableSa; - -/** Offset 0x0303 - Enable VR specific mailbox command - VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A - VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific - command sent for PS4 exit issue. 11b - Reserved. - $EN_DIS -**/ - UINT8 SendVrMbxCmd; - -/** Offset 0x0304 - Reserved - Reserved -**/ - UINT8 Reserved2; - -/** Offset 0x0305 - Enable or Disable TXT - Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 TxtEnable; - -/** Offset 0x0306 -**/ - UINT8 UnusedUpdSpace9[6]; - -/** Offset 0x030C - Deprecated DO NOT USE Skip Multi-Processor Initialization - @deprecated SkipMpInit has been moved to FspmUpd - $EN_DIS -**/ - UINT8 SkipMpInitDeprecated; - -/** Offset 0x030D - McIVR RFI Frequency Prefix - PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1: - Minus (-). -**/ - UINT8 McivrRfiFrequencyPrefix; - -/** Offset 0x030E - McIVR RFI Frequency Adjustment - PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in - increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>. -**/ - UINT8 McivrRfiFrequencyAdjust; - -/** Offset 0x030F - FIVR RFI Frequency - PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: - Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; - 0-1535 (Up to 153.5MHz) for 19MHz clock. -**/ - UINT16 FivrRfiFrequency; - -/** Offset 0x0311 - McIVR RFI Spread Spectrum - PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/- - 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%. -**/ - UINT8 McivrSpreadSpectrum; - -/** Offset 0x0312 - FIVR RFI Spread Spectrum - PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>; - Range: 0.0% to 10.0% (0-100). -**/ - UINT8 FivrSpreadSpectrum; - -/** Offset 0x0313 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableFivr; - -/** Offset 0x0314 - Slew Rate configuration for Deep Package C States for VR FIVR domain - Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForFivr; - -/** Offset 0x0315 - CpuBistData - Pointer CPU BIST Data -**/ - UINT32 CpuBistData; - -/** Offset 0x0319 - Activates VR mailbox command for Intersil VR C-state issues. - Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox - command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. -**/ - UINT8 IslVrCmd; - -/** Offset 0x031A - Imon slope1 correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes -**/ - UINT16 ImonSlope1[5]; - -/** Offset 0x0324 - CPU VR Power Delivery Design - Used to communicate the power delivery design capability of the board. This value - is an enum of the available power delivery segments that are defined in the Platform - Design Guide. -**/ - UINT32 VrPowerDeliveryDesign; - -/** Offset 0x0328 - Pre Wake Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum pre-wake randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled. - Range 0-255 <b>0</b>. -**/ - UINT8 PreWake; - -/** Offset 0x0329 - Ramp Up Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Up randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range - 0-255 <b>0</b>. -**/ - UINT8 RampUp; - -/** Offset 0x032A - Ramp Down Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Down randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range - 0-255 <b>0</b>. -**/ - UINT8 RampDown; - -/** Offset 0x032B - CpuMpPpi - Pointer for CpuMpPpi -**/ - UINT32 CpuMpPpi; - -/** Offset 0x032F - CpuMpHob - Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage. -**/ - UINT32 CpuMpHob; - -/** Offset 0x0333 - Enable or Disable processor debug features - Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x0334 - Imon offset 1 correction - PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. - Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> -**/ - UINT16 ImonOffset1[5]; - -/** Offset 0x033E - ReservedCpuPostMemProduction - Reserved for CPU Post-Mem Production - $EN_DIS -**/ - UINT8 ReservedCpuPostMemProduction[8]; - -/** Offset 0x0346 - Enable DMI ASPM - Deprecated. - $EN_DIS -**/ - UINT8 PchDmiAspm; - -/** Offset 0x0347 - Enable Power Optimizer - Enable DMI Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 PchPwrOptEnable; - -/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble - Write or erase is blocked by hardware. -**/ - UINT8 PchWriteProtectionEnable[5]; - -/** Offset 0x034D - PCH Flash Protection Ranges Read Enble - Read is blocked by hardware. -**/ - UINT8 PchReadProtectionEnable[5]; - -/** Offset 0x0352 - PCH Protect Range Limit - Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for - limit comparison. -**/ - UINT16 PchProtectedRangeLimit[5]; - -/** Offset 0x035C - PCH Protect Range Base - Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. -**/ - UINT16 PchProtectedRangeBase[5]; - -/** Offset 0x0366 - Enable Pme - Enable Azalia wake-on-ring. - $EN_DIS -**/ - UINT8 PchHdaPme; - -/** Offset 0x0367 -**/ - UINT8 UnusedUpdSpace10; - -/** Offset 0x0368 - VC Type - Virtual Channel Type Select: 0: VC0, 1: VC1. - 0: VC0, 1: VC1 -**/ - UINT8 PchHdaVcType; - -/** Offset 0x0369 - HD Audio Link Frequency - HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. - 0: 6MHz, 1: 12MHz, 2: 24MHz -**/ - UINT8 PchHdaLinkFrequency; - -/** Offset 0x036A - iDisp-Link Frequency - iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. - 4: 96MHz, 3: 48MHz -**/ - UINT8 PchHdaIDispLinkFrequency; - -/** Offset 0x036B - iDisp-Link T-mode - iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T. - 0: 2T, 1: 1T -**/ - UINT8 PchHdaIDispLinkTmode; - -/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system - 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox - driver or SST driver supported). - $EN_DIS -**/ - UINT8 PchHdaDspUaaCompliance; - -/** Offset 0x036D - iDisplay Audio Codec disconnection - 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. - $EN_DIS -**/ - UINT8 PchHdaIDispCodecDisconnect; - -/** Offset 0x036E - USB LFPS Filter selection - For each byte bits 2:0 are for p, bits 4:6 are for n. 0h:1.6ns, 1h:2.4ns, 2h:3.2ns, - 3h:4.0ns, 4h:4.8ns, 5h:5.6ns, 6h:6.4ns. -**/ - UINT8 PchUsbHsioFilterSel[10]; - -/** Offset 0x0378 -**/ - UINT8 UnusedUpdSpace11[5]; - -/** Offset 0x037D - Enable PCH Io Apic Entry 24-119 - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIoApicEntry24_119; - -/** Offset 0x037E - PCH Io Apic ID - This member determines IOAPIC ID. Default is 0x02. -**/ - UINT8 PchIoApicId; - -/** Offset 0x037F -**/ - UINT8 UnusedUpdSpace12; - -/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshSpiGpioAssign; - -/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart0GpioAssign; - -/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart1GpioAssign; - -/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c0GpioAssign; - -/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c1GpioAssign; - -/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c2GpioAssign; - -/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp0GpioAssign; - -/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp1GpioAssign; - -/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp2GpioAssign; - -/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp3GpioAssign; - -/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp4GpioAssign; - -/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp5GpioAssign; - -/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp6GpioAssign; - -/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp7GpioAssign; - -/** Offset 0x038E - PCH ISH PDT Unlock Msg - 0: False; 1: True. - $EN_DIS -**/ - UINT8 PchIshPdtUnlock; - -/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchLanLtrEnable; - -/** Offset 0x0390 -**/ - UINT8 UnusedUpdSpace13[3]; - -/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK - Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region - protection. - $EN_DIS -**/ - UINT8 PchLockDownBiosLock; - -/** Offset 0x0394 - PCH Compatibility Revision ID - This member describes whether or not the CRID feature of PCH should be enabled. - $EN_DIS -**/ - UINT8 PchCrid; - -/** Offset 0x0395 - RTC CMOS MEMORY LOCK - Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper - and and lower 128-byte bank of RTC RAM. - $EN_DIS -**/ - UINT8 PchLockDownRtcMemoryLock; - -/** Offset 0x0396 - Enable PCIE RP HotPlug - Indicate whether the root port is hot plug available. -**/ - UINT8 PcieRpHotPlug[24]; - -/** Offset 0x03AE - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. -**/ - UINT8 PcieRpPmSci[24]; - -/** Offset 0x03C6 - Enable PCIE RP Ext Sync - Indicate whether the extended synch is enabled. -**/ - UINT8 PcieRpExtSync[24]; - -/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing - Indicate whether the Transmitter Half Swing is enabled. -**/ - UINT8 PcieRpTransmitterHalfSwing[24]; - -/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect - Probe CLKREQ# signal before enabling CLKREQ# based power management. -**/ - UINT8 PcieRpClkReqDetect[24]; - -/** Offset 0x040E - PCIE RP Advanced Error Report - Indicate whether the Advanced Error Reporting is enabled. -**/ - UINT8 PcieRpAdvancedErrorReporting[24]; - -/** Offset 0x0426 - PCIE RP Unsupported Request Report - Indicate whether the Unsupported Request Report is enabled. -**/ - UINT8 PcieRpUnsupportedRequestReport[24]; - -/** Offset 0x043E - PCIE RP Fatal Error Report - Indicate whether the Fatal Error Report is enabled. -**/ - UINT8 PcieRpFatalErrorReport[24]; - -/** Offset 0x0456 - PCIE RP No Fatal Error Report - Indicate whether the No Fatal Error Report is enabled. -**/ - UINT8 PcieRpNoFatalErrorReport[24]; - -/** Offset 0x046E - PCIE RP Correctable Error Report - Indicate whether the Correctable Error Report is enabled. -**/ - UINT8 PcieRpCorrectableErrorReport[24]; - -/** Offset 0x0486 - PCIE RP System Error On Fatal Error - Indicate whether the System Error on Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnFatalError[24]; - -/** Offset 0x049E - PCIE RP System Error On Non Fatal Error - Indicate whether the System Error on Non Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnNonFatalError[24]; - -/** Offset 0x04B6 - PCIE RP System Error On Correctable Error - Indicate whether the System Error on Correctable Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnCorrectableError[24]; - -/** Offset 0x04CE - PCIE RP Max Payload - Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. -**/ - UINT8 PcieRpMaxPayload[24]; - -/** Offset 0x04E6 - PCH USB3 RX HSIO Tuning parameters - Bits 7:3 are for Signed Magnatude number added to the CTLE code, Bits 2:0 are for - controlling the input offset -**/ - UINT8 PchUsbHsioRxTuningParameters[10]; - -/** Offset 0x04F0 - PCH USB3 HSIO Rx Tuning Enable - Mask for enabling tuning of HSIO Rx signals of USB3 ports. Bits: 0 - HsioCtrlAdaptOffsetCfgEnable, - 1 - HsioFilterSelNEnable, 2 - HsioFilterSelPEnable, 3 - HsioOlfpsCfgPullUpDwnResEnable -**/ - UINT8 PchUsbHsioRxTuningEnable[10]; - -/** Offset 0x04FA -**/ - UINT8 UnusedUpdSpace14[4]; - -/** Offset 0x04FE - PCIE RP Pcie Speed - Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: - PCH_PCIE_SPEED). -**/ - UINT8 PcieRpPcieSpeed[24]; - -/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method - PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; - 1: hardware equalization; 4: Fixed Coeficients. -**/ - UINT8 PcieRpGen3EqPh3Method[24]; - -/** Offset 0x052E - PCIE RP Physical Slot Number - Indicates the slot number for the root port. Default is the value as root port index. -**/ - UINT8 PcieRpPhysicalSlotNumber[24]; - -/** Offset 0x0546 - PCIE RP Completion Timeout - The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. -**/ - UINT8 PcieRpCompletionTimeout[24]; - -/** Offset 0x055E -**/ - UINT8 UnusedUpdSpace15[106]; - -/** Offset 0x05C8 - PCIE RP Aspm - The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is - PchPcieAspmAutoConfig. -**/ - UINT8 PcieRpAspm[24]; - -/** Offset 0x05E0 - PCIE RP L1 Substates - The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). - Default is PchPcieL1SubstatesL1_1_2. -**/ - UINT8 PcieRpL1Substates[24]; - -/** Offset 0x05F8 - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 PcieRpLtrEnable[24]; - -/** Offset 0x0610 - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 PcieRpLtrConfigLock[24]; - -/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm - PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. -**/ - UINT8 PcieEqPh3LaneParamCm[24]; - -/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp - PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. -**/ - UINT8 PcieEqPh3LaneParamCp[24]; - -/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm - PCH_PCIE_EQ_PARAM. Coefficient C-1. -**/ - UINT8 PcieSwEqCoeffListCm[5]; - -/** Offset 0x065D - PCIE Sw Eq CoeffList Cp - PCH_PCIE_EQ_PARAM. Coefficient C+1. -**/ - UINT8 PcieSwEqCoeffListCp[5]; - -/** Offset 0x0662 - PCIE Disable RootPort Clock Gating - Describes whether the PCI Express Clock Gating for each root port is enabled by - platform modules. 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PcieDisableRootPortClockGating; - -/** Offset 0x0663 - PCIE Enable Peer Memory Write - This member describes whether Peer Memory Writes are enabled on the platform. - $EN_DIS -**/ - UINT8 PcieEnablePeerMemoryWrite; - -/** Offset 0x0664 -**/ - UINT8 UnusedUpdSpace16; - -/** Offset 0x0665 - PCIE Compliance Test Mode - Compliance Test Mode shall be enabled when using Compliance Load Board. - $EN_DIS -**/ - UINT8 PcieComplianceTestMode; - -/** Offset 0x0666 - PCIE Rp Function Swap - Allows BIOS to use root port function number swapping when root port of function - 0 is disabled. - $EN_DIS -**/ - UINT8 PcieRpFunctionSwap; - -/** Offset 0x0667 - Teton Glacier Support - Deprecated - $EN_DIS -**/ - UINT8 TetonGlacierSupport; - -/** Offset 0x0668 - Teton Glacier Cycle Router - Specify to which cycle router Teton Glacier is connected, it is valid only when - Teton Glacier support is enabled. Default is 0 for CNP-H system and 1 for CNP-LP system -**/ - UINT8 TetonGlacierCR; - -/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS - When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. - $EN_DIS -**/ - UINT8 PchPmPmeB0S5Dis; - -/** Offset 0x066A - SPI ChipSelect signal polarity - Selects SPI ChipSelect signal polarity. -**/ - UINT8 SerialIoSpiCsPolarity[3]; - -/** Offset 0x066D - PCIE IMR - Enables Isolated Memory Region for PCIe. - $EN_DIS -**/ - UINT8 PcieRpImrEnabled; - -/** Offset 0x066E - PCIE IMR port number - Selects PCIE root port number for IMR feature. -**/ - UINT8 PcieRpImrSelection; - -/** Offset 0x066F - Teton Glacier Detection and Configuration Mode - Enables support for Teton Glacier hybrid storage device. 0: Disabled; 1: Static - Configuration 2: Dynamic Configuration. Default is 0: Disabled - 0: Disabled, 1: Static Configuration, 2: Dynamic Configuration -**/ - UINT8 TetonGlacierMode; - -/** Offset 0x0670 - PCH Pm Wol Enable Override - Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. - $EN_DIS -**/ - UINT8 PchPmWolEnableOverride; - -/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx - Determine if enable PCIe to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmPcieWakeFromDeepSx; - -/** Offset 0x0672 - PCH Pm WoW lan Enable - Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanEnable; - -/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable - Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the - PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanDeepSxEnable; - -/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx - Determine if enable LAN to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmLanWakeFromDeepSx; - -/** Offset 0x0675 - PCH Pm Deep Sx Pol - Deep Sx Policy. - $EN_DIS -**/ - UINT8 PchPmDeepSxPol; - -/** Offset 0x0676 - PCH Pm Slp S3 Min Assert - SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. -**/ - UINT8 PchPmSlpS3MinAssert; - -/** Offset 0x0677 - PCH Pm Slp S4 Min Assert - SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. -**/ - UINT8 PchPmSlpS4MinAssert; - -/** Offset 0x0678 - PCH Pm Slp Sus Min Assert - SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. -**/ - UINT8 PchPmSlpSusMinAssert; - -/** Offset 0x0679 - PCH Pm Slp A Min Assert - SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. -**/ - UINT8 PchPmSlpAMinAssert; - -/** Offset 0x067A - SLP_S0# Override - Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled' - will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion - when debug is enabled. \n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:Disabled, 1:Enabled, 2:Auto -**/ - UINT8 SlpS0Override; - -/** Offset 0x067B - S0ix Override Settings - Select 'Auto', it will be auto-configured according to probe type. 'No Change' will - keep PMC default settings. Or select the desired debug probe type for S0ix Override - settings.\n - Reminder: DCI OOB (aka BSSB) uses CCA probe.\n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto -**/ - UINT8 SlpS0DisQForDebug; - -/** Offset 0x067C - USB Overcurrent Override for DbC - This option overrides USB Over Current enablement state that USB OC will be disabled - after enabling this option. Enable when DbC is used to avoid signaling conflicts. - $EN_DIS -**/ - UINT8 PchEnableDbcObs; - -/** Offset 0x067D - PCH Legacy IO Low Latency Enable - Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable - $EN_DIS -**/ - UINT8 PchLegacyIoLowLatency; - -/** Offset 0x067E -**/ - UINT8 UnusedUpdSpace17[2]; - -/** Offset 0x0680 - PCH Pm Lpc Clock Run - This member describes whether or not the LPC ClockRun feature of PCH should be enabled. - Default value is Disabled - $EN_DIS -**/ - UINT8 PchPmLpcClockRun; - -/** Offset 0x0681 - PCH Pm Slp Strch Sus Up - Enable SLP_X Stretching After SUS Well Power Up. - $EN_DIS -**/ - UINT8 PchPmSlpStrchSusUp; - -/** Offset 0x0682 - PCH Pm Slp Lan Low Dc - Enable/Disable SLP_LAN# Low on DC Power. - $EN_DIS -**/ - UINT8 PchPmSlpLanLowDc; - -/** Offset 0x0683 - PCH Pm Pwr Btn Override Period - PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. -**/ - UINT8 PchPmPwrBtnOverridePeriod; - -/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown - When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. - $EN_DIS -**/ - UINT8 PchPmDisableDsxAcPresentPulldown; - -/** Offset 0x0685 -**/ - UINT8 UnusedUpdSpace18; - -/** Offset 0x0686 - PCH Pm Disable Native Power Button - Power button native mode disable. - $EN_DIS -**/ - UINT8 PchPmDisableNativePowerButton; - -/** Offset 0x0687 - PCH Pm Slp S0 Enable - Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. - $EN_DIS -**/ - UINT8 PchPmSlpS0Enable; - -/** Offset 0x0688 - PCH Pm ME_WAKE_STS - Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmMeWakeSts; - -/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS - Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmWolOvrWkSts; - -/** Offset 0x068A - PCH Pm Reset Power Cycle Duration - Could be customized in the unit of second. Please refer to EDS for all support settings. - 0 is default, 1 is 1 second, 2 is 2 seconds, ... -**/ - UINT8 PchPmPwrCycDur; - -/** Offset 0x068B - PCH Pm Pcie Pll Ssc - Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No - BIOS override. -**/ - UINT8 PchPmPciePllSsc; - -/** Offset 0x068C -**/ - UINT8 UnusedUpdSpace19; - -/** Offset 0x068D - PCH Sata Pwr Opt Enable - SATA Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 SataPwrOptEnable; - -/** Offset 0x068E - PCH Sata eSATA Speed Limit - When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. - $EN_DIS -**/ - UINT8 EsataSpeedLimit; - -/** Offset 0x068F - PCH Sata Speed Limit - Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. -**/ - UINT8 SataSpeedLimit; - -/** Offset 0x0690 - Enable SATA Port HotPlug - Enable SATA Port HotPlug. -**/ - UINT8 SataPortsHotPlug[8]; - -/** Offset 0x0698 - Enable SATA Port Interlock Sw - Enable SATA Port Interlock Sw. -**/ - UINT8 SataPortsInterlockSw[8]; - -/** Offset 0x06A0 - Enable SATA Port External - Enable SATA Port External. -**/ - UINT8 SataPortsExternal[8]; - -/** Offset 0x06A8 - Enable SATA Port SpinUp - Enable the COMRESET initialization Sequence to the device. -**/ - UINT8 SataPortsSpinUp[8]; - -/** Offset 0x06B0 - Enable SATA Port Solid State Drive - 0: HDD; 1: SSD. -**/ - UINT8 SataPortsSolidStateDrive[8]; - -/** Offset 0x06B8 - Enable SATA Port Enable Dito Config - Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). -**/ - UINT8 SataPortsEnableDitoConfig[8]; - -/** Offset 0x06C0 - Enable SATA Port DmVal - DITO multiplier. Default is 15. -**/ - UINT8 SataPortsDmVal[8]; - -/** Offset 0x06C8 - Enable SATA Port DmVal - DEVSLP Idle Timeout (DITO), Default is 625. -**/ - UINT16 SataPortsDitoVal[8]; - -/** Offset 0x06D8 - Enable SATA Port ZpOdd - Support zero power ODD. -**/ - UINT8 SataPortsZpOdd[8]; - -/** Offset 0x06E0 - PCH Sata Rst Raid Device Id - Enable RAID Alternate ID. - 0:Client, 1:Alternate, 2:Server -**/ - UINT8 SataRstRaidDeviceId; - -/** Offset 0x06E1 - PCH Sata Rst Raid0 - RAID0. - $EN_DIS -**/ - UINT8 SataRstRaid0; - -/** Offset 0x06E2 - PCH Sata Rst Raid1 - RAID1. - $EN_DIS -**/ - UINT8 SataRstRaid1; - -/** Offset 0x06E3 - PCH Sata Rst Raid10 - RAID10. - $EN_DIS -**/ - UINT8 SataRstRaid10; - -/** Offset 0x06E4 - PCH Sata Rst Raid5 - RAID5. - $EN_DIS -**/ - UINT8 SataRstRaid5; - -/** Offset 0x06E5 - PCH Sata Rst Irrt - Intel Rapid Recovery Technology. - $EN_DIS -**/ - UINT8 SataRstIrrt; - -/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner - OROM UI and BANNER. - $EN_DIS -**/ - UINT8 SataRstOromUiBanner; - -/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay - 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). -**/ - UINT8 SataRstOromUiDelay; - -/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock - Indicates that the HDD password unlock in the OS is enabled. - $EN_DIS -**/ - UINT8 SataRstHddUnlock; - -/** Offset 0x06E9 - PCH Sata Rst Led Locate - Indicates that the LED/SGPIO hardware is attached and ping to locate feature is - enabled on the OS. - $EN_DIS -**/ - UINT8 SataRstLedLocate; - -/** Offset 0x06EA - PCH Sata Rst Irrt Only - Allow only IRRT drives to span internal and external ports. - $EN_DIS -**/ - UINT8 SataRstIrrtOnly; - -/** Offset 0x06EB - PCH Sata Rst Smart Storage - RST Smart Storage caching Bit. - $EN_DIS -**/ - UINT8 SataRstSmartStorage; - -/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable - Enable Intel RST for PCIe Storage remapping. -**/ - UINT8 SataRstPcieEnable[3]; - -/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port - Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). -**/ - UINT8 SataRstPcieStoragePort[3]; - -/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay - PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms -**/ - UINT8 SataRstPcieDeviceResetDelay[3]; - -/** Offset 0x06F5 - Enable eMMC HS400 Training - Deprecated. - $EN_DIS -**/ - UINT8 PchScsEmmcHs400TuningRequired; - -/** Offset 0x06F6 - Set HS400 Tuning Data Valid - Set if HS400 Tuning Data Valid. - $EN_DIS -**/ - UINT8 PchScsEmmcHs400DllDataValid; - -/** Offset 0x06F7 - Rx Strobe Delay Control - Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode). -**/ - UINT8 PchScsEmmcHs400RxStrobeDll1; - -/** Offset 0x06F8 - Tx Data Delay Control - Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode). -**/ - UINT8 PchScsEmmcHs400TxDataDll; - -/** Offset 0x06F9 - I/O Driver Strength - Deprecated. - 0:33 Ohm, 1:40 Ohm, 2:50 Ohm -**/ - UINT8 PchScsEmmcHs400DriverStrength; - -/** Offset 0x06FA - PCH SerialIo I2C Pads Termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5 - pads termination respectively. One byte for each controller, byte0 for I2C0, byte1 - for I2C1, and so on. -**/ - UINT8 PchSerialIoI2cPadsTermination[6]; - -/** Offset 0x0700 -**/ - UINT8 UnusedUpdSpace20; - -/** Offset 0x0701 - PcdSerialIoUart0PinMuxing - Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled. - 0:default pins, 1:pins muxed with CNV_BRI/RGI -**/ - UINT8 SerialIoUart0PinMuxing; - -/** Offset 0x0702 -**/ - UINT8 UnusedUpdSpace21[1]; - -/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines - Enables UART hardware flow control, CTS and RTS linesh. -**/ - UINT8 SerialIoUartHwFlowCtrl[3]; - -/** Offset 0x0706 - UART Number For Debug Purpose - UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected - as CNVi BT Core interface, it cannot be used for debug purpose. - 0:UART0, 1:UART1, 2:UART2 -**/ - UINT8 SerialIoDebugUartNumber; - -/** Offset 0x0707 - Enable Debug UART Controller - Enable debug UART controller after post. - $EN_DIS -**/ - UINT8 SerialIoEnableDebugUartAfterPost; - -/** Offset 0x0708 - Enable Serial IRQ - Determines if enable Serial IRQ. - $EN_DIS -**/ - UINT8 PchSirqEnable; - -/** Offset 0x0709 - Serial IRQ Mode Select - Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode. - $EN_DIS -**/ - UINT8 PchSirqMode; - -/** Offset 0x070A - Start Frame Pulse Width - Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk. - 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk -**/ - UINT8 PchStartFramePulse; - -/** Offset 0x070B - Reserved - Reserved - $EN_DIS -**/ - UINT8 ReservedForFuture1; - -/** Offset 0x070C - Thermal Device SMI Enable - This locks down SMI Enable on Alert Thermal Sensor Trip. - $EN_DIS -**/ - UINT8 PchTsmicLock; - -/** Offset 0x070D - Thermal Throttling Custimized T0Level Value - Custimized T0Level value. -**/ - UINT16 PchT0Level; - -/** Offset 0x070F - Thermal Throttling Custimized T1Level Value - Custimized T1Level value. -**/ - UINT16 PchT1Level; - -/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value - Custimized T2Level value. -**/ - UINT16 PchT2Level; - -/** Offset 0x0713 - Enable The Thermal Throttle - Enable the thermal throttle function. - $EN_DIS -**/ - UINT8 PchTTEnable; - -/** Offset 0x0714 - PMSync State 13 - When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force - at least T2 state. - $EN_DIS -**/ - UINT8 PchTTState13Enable; - -/** Offset 0x0715 - Thermal Throttle Lock - Thermal Throttle Lock. - $EN_DIS -**/ - UINT8 PchTTLock; - -/** Offset 0x0716 - Thermal Throttling Suggested Setting - Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 TTSuggestedSetting; - -/** Offset 0x0717 - Enable PCH Cross Throttling - Enable/Disable PCH Cross Throttling - $EN_DIS -**/ - UINT8 TTCrossThrottling; - -/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable - DMI Thermal Sensor Autonomous Width Enable. - $EN_DIS -**/ - UINT8 PchDmiTsawEn; - -/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting - DMT thermal sensor suggested representative values. - $EN_DIS -**/ - UINT8 DmiSuggestedSetting; - -/** Offset 0x071A - Thermal Sensor 0 Target Width - DMT thermal sensor suggested representative values. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS0TW; - -/** Offset 0x071B - Thermal Sensor 1 Target Width - Thermal Sensor 1 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS1TW; - -/** Offset 0x071C - Thermal Sensor 2 Target Width - Thermal Sensor 2 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS2TW; - -/** Offset 0x071D - Thermal Sensor 3 Target Width - Thermal Sensor 3 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS3TW; - -/** Offset 0x071E - Port 0 T1 Multipler - Port 0 T1 Multipler. -**/ - UINT8 SataP0T1M; - -/** Offset 0x071F - Port 0 T2 Multipler - Port 0 T2 Multipler. -**/ - UINT8 SataP0T2M; - -/** Offset 0x0720 - Port 0 T3 Multipler - Port 0 T3 Multipler. -**/ - UINT8 SataP0T3M; - -/** Offset 0x0721 - Port 0 Tdispatch - Port 0 Tdispatch. -**/ - UINT8 SataP0TDisp; - -/** Offset 0x0722 - Port 1 T1 Multipler - Port 1 T1 Multipler. -**/ - UINT8 SataP1T1M; - -/** Offset 0x0723 - Port 1 T2 Multipler - Port 1 T2 Multipler. -**/ - UINT8 SataP1T2M; - -/** Offset 0x0724 - Port 1 T3 Multipler - Port 1 T3 Multipler. -**/ - UINT8 SataP1T3M; - -/** Offset 0x0725 - Port 1 Tdispatch - Port 1 Tdispatch. -**/ - UINT8 SataP1TDisp; - -/** Offset 0x0726 - Port 0 Tinactive - Port 0 Tinactive. -**/ - UINT8 SataP0Tinact; - -/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch - Port 0 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP0TDispFinit; - -/** Offset 0x0728 - Port 1 Tinactive - Port 1 Tinactive. -**/ - UINT8 SataP1Tinact; - -/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch - Port 1 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP1TDispFinit; - -/** Offset 0x072A - Sata Thermal Throttling Suggested Setting - Sata Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 SataThermalSuggestedSetting; - -/** Offset 0x072B - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. - $EN_DIS -**/ - UINT8 PchMemoryThrottlingEnable; - -/** Offset 0x072C - Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPmsyncEnable[2]; - -/** Offset 0x072E - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryC0TransmitEnable[2]; - -/** Offset 0x0730 - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPinSelection[2]; - -/** Offset 0x0732 - Thermal Device Temperature - Decides the temperature. -**/ - UINT16 PchTemperatureHotLevel; - -/** Offset 0x0734 - Enable xHCI Compliance Mode - Compliance Mode can be enabled for testing through this option but this is disabled - by default. - $EN_DIS -**/ - UINT8 PchEnableComplianceMode; - -/** Offset 0x0735 - USB2 Port Over Current Pin - Describe the specific over current pin number of USB 2.0 Port N. -**/ - UINT8 Usb2OverCurrentPin[16]; - -/** Offset 0x0745 - USB3 Port Over Current Pin - Describe the specific over current pin number of USB 3.0 Port N. -**/ - UINT8 Usb3OverCurrentPin[10]; - -/** Offset 0x074F - Enable 8254 Static Clock Gating - Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time - might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support - boot legacy OS using 8254 timer. Also enable this while S0ix is enabled. - $EN_DIS -**/ - UINT8 Enable8254ClockGating; - -/** Offset 0x0750 - PCH Sata Rst Optane Memory - Optane Memory - $EN_DIS -**/ - UINT8 SataRstOptaneMemory; - -/** Offset 0x0751 - PCH Sata Rst CPU Attached Storage - CPU Attached Storage - $EN_DIS -**/ - UINT8 SataRstCpuAttachedStorage; - -/** Offset 0x0752 - Enable 8254 Static Clock Gating On S3 - This is only applicable when Enable8254ClockGating is disabled. FSP will do the - 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This - avoids the SMI requirement for the programming. - $EN_DIS -**/ - UINT8 Enable8254ClockGatingOnS3; - -/** Offset 0x0753 -**/ - UINT8 UnusedUpdSpace22; - -/** Offset 0x0754 - Pch PCIE device override table pointer - The PCIe device table is being used to override PCIe device ASPM settings. This - is a pointer points to a 32bit address. And it's only used in PostMem phase. Please - refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId - must be 0. -**/ - UINT32 PchPcieDeviceOverrideTablePtr; - -/** Offset 0x0758 - Enable TCO timer. - When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have - huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer - emulation must be enabled, and WDAT table must not be exposed to the OS. - $EN_DIS -**/ - UINT8 EnableTcoTimer; - -/** Offset 0x0759 - BgpdtHash[4] - BgpdtHash values -**/ - UINT64 BgpdtHash[4]; - -/** Offset 0x0779 - BiosGuardAttr - BiosGuardAttr default values -**/ - UINT32 BiosGuardAttr; - -/** Offset 0x077D - BiosGuardModulePtr - BiosGuardModulePtr default values -**/ - UINT64 BiosGuardModulePtr; - -/** Offset 0x0785 - SendEcCmd - SendEcCmd function pointer. \n - @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE - EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode -**/ - UINT64 SendEcCmd; - -/** Offset 0x078D - EcCmdProvisionEav - Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC -**/ - UINT8 EcCmdProvisionEav; - -/** Offset 0x078E - EcCmdLock - EcCmdLock default values. Locks Ephemeral Authorization Value sent previously -**/ - UINT8 EcCmdLock; - -/** Offset 0x078F - SgxEpoch0 - SgxEpoch0 default values -**/ - UINT64 SgxEpoch0; - -/** Offset 0x0797 - SgxEpoch1 - SgxEpoch1 default values -**/ - UINT64 SgxEpoch1; - -/** Offset 0x079F - SgxSinitNvsData - SgxSinitNvsData default values -**/ - UINT8 SgxSinitNvsData; - -/** Offset 0x07A0 - Si Config CSM Flag. - Platform specific common policies that used by several silicon components. CSM status flag. - $EN_DIS -**/ - UINT8 SiCsmFlag; - -/** Offset 0x07A1 - SVID SDID table Poniter. - The address of the table of SVID SDID to customize each SVID SDID entry. -**/ - UINT32 SiSsidTablePtr; - -/** Offset 0x07A5 - Number of ssid table. - SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. -**/ - UINT16 SiNumberOfSsidTableEntry; - -/** Offset 0x07A7 - SATA RST Interrupt Mode - Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. - 0:Msix, 1:Msi, 2:Legacy -**/ - UINT8 SataRstInterrupt; - -/** Offset 0x07A8 - ME Unconfig on RTC clear - 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. - 2: Cmos is clear, status unkonwn. 3: Reserved - 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos - is clear, 3: Reserved -**/ - UINT8 MeUnconfigOnRtcClear; - -/** Offset 0x07A9 - Enable PS_ON. - PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power - target that will be required by the California Energy Commission (CEC). When FALSE, - PS_ON is to be disabled. - $EN_DIS -**/ - UINT8 PsOnEnable; - -/** Offset 0x07AA - Pmc Cpu C10 Gate Pin Enable - Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO - and VccSTG rails instead of SLP_S0# pin. - $EN_DIS -**/ - UINT8 PmcCpuC10GatePinEnable; - -/** Offset 0x07AB - Pch Dmi Aspm Ctrl - ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> - 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto -**/ - UINT8 PchDmiAspmCtrl; - -/** Offset 0x07AC -**/ - UINT8 ReservedFspsUpd[1]; -} FSP_S_CONFIG; - -/** Fsp S Test Configuration -**/ -typedef struct { - -/** Offset 0x07AD -**/ - UINT32 Signature; - -/** Offset 0x07B1 - Enable/Disable Device 7 - Enable: Device 7 enabled, Disable (Default): Device 7 disabled - $EN_DIS -**/ - UINT8 ChapDeviceEnable; - -/** Offset 0x07B2 - Skip PAM register lock - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - $EN_DIS -**/ - UINT8 SkipPamLock; - -/** Offset 0x07B3 - EDRAM Test Mode - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode -**/ - UINT8 EdramTestMode; - -/** Offset 0x07B4 - DMI Extended Sync Control - Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended - Sync Control - $EN_DIS -**/ - UINT8 DmiExtSync; - -/** Offset 0x07B5 - DMI IOT Control - Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control - $EN_DIS -**/ - UINT8 DmiIot; - -/** Offset 0x07B6 - PEG Max Payload size per root port - 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B - 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B -**/ - UINT8 PegMaxPayload[4]; - -/** Offset 0x07BA - Enable/Disable IGFX RenderStandby - Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby - $EN_DIS -**/ - UINT8 RenderStandby; - -/** Offset 0x07BB - Enable/Disable IGFX PmSupport - Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport - $EN_DIS -**/ - UINT8 PmSupport; - -/** Offset 0x07BC - Enable/Disable CdynmaxClamp - Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp - $EN_DIS -**/ - UINT8 CdynmaxClampEnable; - -/** Offset 0x07BD - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisableDeprecated; - -/** Offset 0x07BE - GT Frequency Limit - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz -**/ - UINT8 GtFreqMax; - -/** Offset 0x07BF - Disable Turbo GT - 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency - $EN_DIS -**/ - UINT8 DisableTurboGt; - -/** Offset 0x07C0 - SaPostMemTestRsvd - Reserved for SA Post-Mem Test - $EN_DIS -**/ - UINT8 SaPostMemTestRsvd[11]; - -/** Offset 0x07CB - 1-Core Ratio Limit - 1-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 1-Core - Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit, - 4-Core Ratio Limit, 5-Core Ratio Limit, 6-Core Ratio Limit, 7-Core Ratio Limit, - 8-Core Ratio Limit. Range is 0 to 255 -**/ - UINT8 OneCoreRatioLimit; - -/** Offset 0x07CC - 2-Core Ratio Limit - 2-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 2-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 TwoCoreRatioLimit; - -/** Offset 0x07CD - 3-Core Ratio Limit - 3-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 3-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 ThreeCoreRatioLimit; - -/** Offset 0x07CE - 4-Core Ratio Limit - 4-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 4-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 FourCoreRatioLimit; - -/** Offset 0x07CF - Enable or Disable HWP - Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> - 2-3:Reserved - $EN_DIS -**/ - UINT8 Hwp; - -/** Offset 0x07D0 - Hardware Duty Cycle Control - Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved - $EN_DIS -**/ - UINT8 HdcControl; - -/** Offset 0x07D1 - Package Long duration turbo mode time - Package Long duration turbo mode time window in seconds. 0 = AUTO, uses 28 seconds. - Valid values(Unit in seconds) 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 - , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PowerLimit1Time; - -/** Offset 0x07D2 - Short Duration Turbo Mode - Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PowerLimit2; - -/** Offset 0x07D3 - Turbo settings Lock - Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable - $EN_DIS -**/ - UINT8 TurboPowerLimitLock; - -/** Offset 0x07D4 - Package PL3 time window - Package PL3 time window range for this policy from 0 to 64ms -**/ - UINT8 PowerLimit3Time; - -/** Offset 0x07D5 - Package PL3 Duty Cycle - Package PL3 Duty Cycle; Valid Range is 0 to 100 -**/ - UINT8 PowerLimit3DutyCycle; - -/** Offset 0x07D6 - Package PL3 Lock - Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable - $EN_DIS -**/ - UINT8 PowerLimit3Lock; - -/** Offset 0x07D7 - Package PL4 Lock - Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable - $EN_DIS -**/ - UINT8 PowerLimit4Lock; - -/** Offset 0x07D8 - TCC Activation Offset - TCC Activation Offset. Offset from factory set TCC activation temperature at which - the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation - Temperature, in volts.For Y SKU, the recommended default for this policy is <b>15</b>, - For all other SKUs the recommended default are <b>0</b> -**/ - UINT8 TccActivationOffset; - -/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable - Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle - below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>, - For all other SKUs the recommended default are <b>0: Disabled</b>. - $EN_DIS -**/ - UINT8 TccOffsetClamp; - -/** Offset 0x07DA - Tcc Offset Lock - Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature - target; <b>0: Disabled</b>; 1: Enabled. - $EN_DIS -**/ - UINT8 TccOffsetLock; - -/** Offset 0x07DB - Custom Ratio State Entries - The number of custom ratio state entries, ranges from 0 to 40 for a valid custom - ratio table.Sets the number of custom P-states. At least 2 states must be present -**/ - UINT8 NumberOfEntries; - -/** Offset 0x07DC - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom1PowerLimit1Time; - -/** Offset 0x07DD - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 -**/ - UINT8 Custom1TurboActivationRatio; - -/** Offset 0x07DE - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom1ConfigTdpControl; - -/** Offset 0x07DF - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom2PowerLimit1Time; - -/** Offset 0x07E0 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 -**/ - UINT8 Custom2TurboActivationRatio; - -/** Offset 0x07E1 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom2ConfigTdpControl; - -/** Offset 0x07E2 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom3PowerLimit1Time; - -/** Offset 0x07E3 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 -**/ - UINT8 Custom3TurboActivationRatio; - -/** Offset 0x07E4 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom3ConfigTdpControl; - -/** Offset 0x07E5 - ConfigTdp mode settings Lock - Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ConfigTdpLock; - -/** Offset 0x07E6 - Load Configurable TDP SSDT - Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ConfigTdpBios; - -/** Offset 0x07E7 - PL1 Enable value - PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit1; - -/** Offset 0x07E8 - PL1 timewindow - PL1 timewindow in seconds. 0 = AUTO, uses 28 seconds. Valid values(Unit in seconds) - 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PsysPowerLimit1Time; - -/** Offset 0x07E9 - PL2 Enable Value - PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; - 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit2; - -/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher - Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MlcStreamerPrefetcher; - -/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher - Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 MlcSpatialPrefetcher; - -/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions - Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MonitorMwaitEnable; - -/** Offset 0x07ED - Enable or Disable initialization of machine check registers - Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MachineCheckEnable; - -/** Offset 0x07EE - Deprecated DO NOT USE Enable or Disable processor debug features - @deprecated Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x07EF - Lock or Unlock debug interface features - Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DebugInterfaceLockEnable; - -/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI - AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. - 1: HALT loop, 2: MWAIT loop, 3: RUN loop -**/ - UINT8 ApIdleManner; - -/** Offset 0x07F1 - Control on Processor Trace output scheme - Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. - 0: Single Range Output, 1: ToPA Output -**/ - UINT8 ProcessorTraceOutputScheme; - -/** Offset 0x07F2 - Enable or Disable Processor Trace feature - Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcessorTraceEnable; - -/** Offset 0x07F3 - Base of memory region allocated for Processor Trace - Base address of memory region allocated for Processor Trace. Processor Trace requires - 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT64 ProcessorTraceMemBase; - -/** Offset 0x07FB - Memory region allocation for Processor Trace - Length in bytes of memory region allocated for Processor Trace. Processor Trace - requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT32 ProcessorTraceMemLength; - -/** Offset 0x07FF - Enable or Disable Voltage Optimization feature - Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 VoltageOptimization; - -/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology - Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Eist; - -/** Offset 0x0801 - Enable or Disable Energy Efficient P-state - Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientPState; - -/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo - Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientTurbo; - -/** Offset 0x0803 - Enable or Disable T states - Enable or Disable T states; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 TStates; - -/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 BiProcHot; - -/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally - Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DisableProcHotOut; - -/** Offset 0x0806 - Enable or Disable PROCHOT# Response - Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcHotResponse; - -/** Offset 0x0807 - Enable or Disable VR Thermal Alert - Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DisableVrThermalAlert; - -/** Offset 0x0808 - Enable or Disable Thermal Reporting - Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 AutoThermalReporting; - -/** Offset 0x0809 - Enable or Disable Thermal Monitor - Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 ThermalMonitor; - -/** Offset 0x080A - Enable or Disable CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Cx; - -/** Offset 0x080B - Configure C-State Configuration Lock - Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 PmgCstCfgCtrlLock; - -/** Offset 0x080C - Enable or Disable Enhanced C-states - Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1e; - -/** Offset 0x080D - Enable or Disable Package Cstate Demotion - Enable or Disable Package Cstate Demotion. Policy will be ignored for CNL-U. 0: - Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PkgCStateDemotion; - -/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion - Enable or Disable Package Cstate UnDemotion. Policy will be ignored for CNL-U. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PkgCStateUnDemotion; - -/** Offset 0x080F - Enable or Disable CState-Pre wake - Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 CStatePreWake; - -/** Offset 0x0810 - Enable or Disable TimedMwait Support. - Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 TimedMwait; - -/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection - Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 CstCfgCtrIoMwaitRedirection; - -/** Offset 0x0812 - Set the Max Pkg Cstate - Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep - C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , - 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto -**/ - UINT8 PkgCStateLimit; - -/** Offset 0x0813 - TimeUnit for C-State Latency Control0 - TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl0TimeUnit; - -/** Offset 0x0814 - TimeUnit for C-State Latency Control1 - TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl1TimeUnit; - -/** Offset 0x0815 - TimeUnit for C-State Latency Control2 - TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl2TimeUnit; - -/** Offset 0x0816 - TimeUnit for C-State Latency Control3 - TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl3TimeUnit; - -/** Offset 0x0817 - TimeUnit for C-State Latency Control4 - Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl4TimeUnit; - -/** Offset 0x0818 - TimeUnit for C-State Latency Control5 - TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl5TimeUnit; - -/** Offset 0x0819 - Interrupt Redirection Mode Select - Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: - No change. -**/ - UINT8 PpmIrmSetting; - -/** Offset 0x081A - Lock prochot configuration - Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ProcHotLock; - -/** Offset 0x081B - Configuration for boot TDP selection - Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP - Up;0xFF : Deactivate -**/ - UINT8 ConfigTdpLevel; - -/** Offset 0x081C - Race To Halt - Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency - in order to enter pkg C-State faster to reduce overall power. (RTH is controlled - through MSR 1FC bit 20)Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 RaceToHalt; - -/** Offset 0x081D - Max P-State Ratio - Max P-State Ratio, Valid Range 0 to 0x7F -**/ - UINT8 MaxRatio; - -/** Offset 0x081E - P-state ratios for custom P-state table - P-state ratios for custom P-state table. NumberOfEntries has valid range between - 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] - are configurable. Valid Range of each entry is 0 to 0x7F -**/ - UINT8 StateRatio[40]; - -/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table - P-state ratios for max 16 version of custom P-state table. This table is used for - OS versions limited to a max of 16 P-States. If the first entry of this table is - 0, or if Number of Entries is 16 or less, then this table will be ignored, and - up to the top 16 values of the StateRatio table will be used instead. Valid Range - of each entry is 0 to 0x7F -**/ - UINT8 StateRatioMax16[16]; - -/** Offset 0x0856 - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W -**/ - UINT16 PsysPmax; - -/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0 - Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl0Irtl; - -/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1 - Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl1Irtl; - -/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2 - Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl2Irtl; - -/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3 - Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl3Irtl; - -/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4 - Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl4Irtl; - -/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5 - Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl5Irtl; - -/** Offset 0x0864 - Package Long duration turbo mode power limit - Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. - Valid Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit1; - -/** Offset 0x0868 - Package Short duration turbo mode power limit - Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit2Power; - -/** Offset 0x086C - Package PL3 power limit - Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit3; - -/** Offset 0x0870 - Package PL4 power limit - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 1023875 in Step size of 125 -**/ - UINT32 PowerLimit4; - -/** Offset 0x0874 - Tcc Offset Time Window for RATL - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 1023875 in Step size of 125 -**/ - UINT32 TccOffsetTimeWindowForRatl; - -/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1 - Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit1; - -/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1 - Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit2; - -/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2 - Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit1; - -/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2 - Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit2; - -/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3 - Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit1; - -/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3 - Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit2; - -/** Offset 0x0890 - Platform PL1 power - Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit1Power; - -/** Offset 0x0894 - Platform PL2 power - Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit2Power; - -/** Offset 0x0898 - Set Three Strike Counter Disable - False (default): Three Strike counter will be incremented and True: Prevents Three - Strike counter from incrementing; <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 ThreeStrikeCounterDisable; - -/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 HwpInterruptControl; - -/** Offset 0x089A - 5-Core Ratio Limit - 5-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 5-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 FiveCoreRatioLimit; - -/** Offset 0x089B - 6-Core Ratio Limit - 6-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 6-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 SixCoreRatioLimit; - -/** Offset 0x089C - 7-Core Ratio Limit - 7-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 7-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 SevenCoreRatioLimit; - -/** Offset 0x089D - 8-Core Ratio Limit - 8-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 8-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 EightCoreRatioLimit; - -/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0 - Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> - $EN_DIS -**/ - UINT8 EnableItbm; - -/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver - Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled - $EN_DIS -**/ - UINT8 EnableItbmDriver; - -/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion - Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateAutoDemotion; - -/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion - Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateUnDemotion; - -/** Offset 0x08A2 - CpuWakeUpTimer - Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased - to 180 seconds. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 CpuWakeUpTimer; - -/** Offset 0x08A3 - Minimum Ring ratio limit override - Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MinRingRatioLimit; - -/** Offset 0x08A4 - Minimum Ring ratio limit override - Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MaxRingRatioLimit; - -/** Offset 0x08A5 - ReservedCpuPostMemTest - Reserved for CPU Post-Mem Test - $EN_DIS -**/ - UINT8 ReservedCpuPostMemTest[21]; - -/** Offset 0x08BA - SgxSinitDataFromTpm - SgxSinitDataFromTpm default values -**/ - UINT8 SgxSinitDataFromTpm; - -/** Offset 0x08BB - End of Post message - Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): - EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI - 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved -**/ - UINT8 EndOfPostMessage; - -/** Offset 0x08BC - D0I3 Setting for HECI Disable - Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all - HECI devices - $EN_DIS -**/ - UINT8 DisableD0I3SettingForHeci; - -/** Offset 0x08BD - HD Audio Reset Wait Timer - The delay timer after Azalia reset, the value is number of microseconds. Default is 600. -**/ - UINT16 PchHdaResetWaitTimer; - -/** Offset 0x08BF - Enable LOCKDOWN SMI - Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. - $EN_DIS -**/ - UINT8 PchLockDownGlobalSmi; - -/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface - Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. - $EN_DIS -**/ - UINT8 PchLockDownBiosInterface; - -/** Offset 0x08C1 - Unlock all GPIO pads - Force all GPIO pads to be unlocked for debug purpose. - $EN_DIS -**/ - UINT8 PchUnlockGpioPads; - -/** Offset 0x08C2 - PCH Unlock SBI access - Deprecated - $EN_DIS -**/ - UINT8 PchSbiUnlock; - -/** Offset 0x08C3 - PCH Unlock SideBand access - The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before - 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. - $EN_DIS -**/ - UINT8 PchSbAccessUnlock; - -/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency - Latency Tolerance Reporting, Max Snoop Latency. -**/ - UINT16 PcieRpLtrMaxSnoopLatency[24]; - -/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. -**/ - UINT16 PcieRpLtrMaxNoSnoopLatency[24]; - -/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 PcieRpSnoopLatencyOverrideMode[24]; - -/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x0954 - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 PcieRpSnoopLatencyOverrideValue[24]; - -/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; - -/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; - -/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale - Specifies scale used for slot power limit value. Leave as 0 to set to default. -**/ - UINT8 PcieRpSlotPowerLimitScale[24]; - -/** Offset 0x09FC - PCIE RP Slot Power Limit Value - Specifies upper limit on power supplie by slot. Leave as 0 to set to default. -**/ - UINT16 PcieRpSlotPowerLimitValue[24]; - -/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 5. -**/ - UINT8 PcieRpUptp[24]; - -/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 7. -**/ - UINT8 PcieRpDptp[24]; - -/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode - This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; - 1: Enable. - $EN_DIS -**/ - UINT8 PcieEnablePort8xhDecode; - -/** Offset 0x0A5D - PCIE Port8xh Decode Port Index - The Index of PCIe Port that is selected for Port8xh Decode (0 Based). -**/ - UINT8 PchPciePort8xhDecodePortIndex; - -/** Offset 0x0A5E - PCH Energy Reporting - Disable/Enable PCH to CPU energy report feature. - $EN_DIS -**/ - UINT8 PchPmDisableEnergyReport; - -/** Offset 0x0A5F - PCH Sata Test Mode - Allow entrance to the PCH SATA test modes. - $EN_DIS -**/ - UINT8 SataTestMode; - -/** Offset 0x0A60 - PCH USB OverCurrent mapping lock enable - If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning - that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. - $EN_DIS -**/ - UINT8 PchXhciOcLock; - -/** Offset 0x0A61 -**/ - UINT8 UnusedUpdSpace23[17]; - -/** Offset 0x0A72 - Skip POSTBOOT SAI - Deprecated - $EN_DIS -**/ - UINT8 SkipPostBootSai; - -/** Offset 0x0A73 - Mctp Broadcast Cycle - Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 MctpBroadcastCycle; - -/** Offset 0x0A74 -**/ - UINT8 ReservedFspsTestUpd[12]; -} FSP_S_TEST_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSP_S_CONFIG FspsConfig; - -/** Offset 0x07AD -**/ - FSP_S_TEST_CONFIG FspsTestConfig; - -/** Offset 0x0A80 -**/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h deleted file mode 100644 index bef3ee5e6b..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h +++ /dev/null @@ -1,136 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPTUPD_H__ -#define __FSPTUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -/** Fsp T Core UPD -**/ -typedef struct { - -/** Offset 0x0020 -**/ - UINT32 MicrocodeRegionBase; - -/** Offset 0x0024 -**/ - UINT32 MicrocodeRegionSize; - -/** Offset 0x0028 -**/ - UINT32 CodeRegionBase; - -/** Offset 0x002C -**/ - UINT32 CodeRegionSize; - -/** Offset 0x0030 -**/ - UINT8 Reserved[16]; -} FSPT_CORE_UPD; - -/** Fsp T Configuration -**/ -typedef struct { - -/** Offset 0x0040 - PcdSerialIoUartDebugEnable - Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. - 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing -**/ - UINT8 PcdSerialIoUartDebugEnable; - -/** Offset 0x0041 - PcdSerialIoUartNumber - FSPT - Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT - Core interface, it cannot be used for debug purpose. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 -**/ - UINT8 PcdSerialIoUartNumber; - -/** Offset 0x0042 - PcdSerialIoUart0PinMuxing - FSPT - Select SerialIo Uart0 pin muxing. Setting valid only if PcdSerialIoUartNumber is - set to UART0. - 0:default pins, 1:pins muxed with CNV_BRI/RGI -**/ - UINT8 PcdSerialIoUart0PinMuxing; - -/** Offset 0x0043 -**/ - UINT8 UnusedUpdSpace0; - -/** Offset 0x0044 -**/ - UINT32 PcdSerialIoUartInputClock; - -/** Offset 0x0048 - Pci Express Base Address - Base address to be programmed for Pci Express -**/ - UINT64 PcdPciExpressBaseAddress; - -/** Offset 0x0050 - Pci Express Region Length - Region Length to be programmed for Pci Express -**/ - UINT32 PcdPciExpressRegionLength; - -/** Offset 0x0054 -**/ - UINT8 ReservedFsptUpd1[44]; -} FSP_T_CONFIG; - -/** Fsp T UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPT_CORE_UPD FsptCoreUpd; - -/** Offset 0x0040 -**/ - FSP_T_CONFIG FsptConfig; - -/** Offset 0x0080 -**/ - UINT16 UpdTerminator; -} FSPT_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h deleted file mode 100644 index e605e92d0b..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h +++ /dev/null @@ -1,270 +0,0 @@ -/** @file - This file contains definitions required for creation of - Memory S3 Save data, Memory Info data and Memory Platform - data hobs. - - @copyright - Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials are licensed and made available under - the terms and conditions of the BSD License that accompanies this distribution. - The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php. - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -@par Specification Reference: -**/ -#ifndef _MEM_INFO_HOB_H_ -#define _MEM_INFO_HOB_H_ - -#include <Uefi/UefiMultiPhase.h> -#include <Pi/PiBootMode.h> -#include <Pi/PiHob.h> - -#pragma pack (push, 1) - -extern EFI_GUID gSiMemoryS3DataGuid; -extern EFI_GUID gSiMemoryInfoDataGuid; -extern EFI_GUID gSiMemoryPlatformDataGuid; - -#define MAX_NODE 1 -#define MAX_CH 2 -#define MAX_DIMM 2 - -/// -/// Host reset states from MRC. -/// -#define WARM_BOOT 2 - -#define R_MC_CHNL_RANK_PRESENT 0x7C -#define B_RANK0_PRS BIT0 -#define B_RANK1_PRS BIT1 -#define B_RANK2_PRS BIT4 -#define B_RANK3_PRS BIT5 - -/// -/// Defines taken from MRC so avoid having to include MrcInterface.h -/// - -// -// Matches MAX_SPD_SAVE define in MRC -// -#ifndef MAX_SPD_SAVE -#define MAX_SPD_SAVE 29 -#endif - -// -// MRC version description. -// -typedef struct { - UINT8 Major; ///< Major version number - UINT8 Minor; ///< Minor version number - UINT8 Rev; ///< Revision number - UINT8 Build; ///< Build number -} SiMrcVersion; - -// -// Matches MrcChannelSts enum in MRC -// -#ifndef CHANNEL_NOT_PRESENT -#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. -#endif -#ifndef CHANNEL_DISABLED -#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. -#endif -#ifndef CHANNEL_PRESENT -#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. -#endif - -// -// Matches MrcDimmSts enum in MRC -// -#ifndef DIMM_ENABLED -#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. -#endif -#ifndef DIMM_DISABLED -#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. -#endif -#ifndef DIMM_PRESENT -#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. -#endif -#ifndef DIMM_NOT_PRESENT -#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. -#endif - -// -// Matches MrcBootMode enum in MRC -// -#ifndef bmCold -#define bmCold 0 // Cold boot -#endif -#ifndef bmWarm -#define bmWarm 1 // Warm boot -#endif -#ifndef bmS3 -#define bmS3 2 // S3 resume -#endif -#ifndef bmFast -#define bmFast 3 // Fast boot -#endif - -// -// Matches MrcDdrType enum in MRC -// -#ifndef MRC_DDR_TYPE_DDR4 -#define MRC_DDR_TYPE_DDR4 0 -#endif -#ifndef MRC_DDR_TYPE_DDR3 -#define MRC_DDR_TYPE_DDR3 1 -#endif -#ifndef MRC_DDR_TYPE_LPDDR3 -#define MRC_DDR_TYPE_LPDDR3 2 -#endif -#ifndef CPU_CFL//CNL -#ifndef MRC_DDR_TYPE_LPDDR4 -#define MRC_DDR_TYPE_LPDDR4 3 -#endif -#else//CFL -#ifndef MRC_DDR_TYPE_UNKNOWN -#define MRC_DDR_TYPE_UNKNOWN 3 -#endif -#endif//CPU_CFL-endif - -#define MAX_PROFILE_NUM 4 // number of memory profiles supported -#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported - -// -// DIMM timings -// -typedef struct { - UINT32 tCK; ///< Memory cycle time, in femtoseconds. - UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. - UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. - UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. - UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. - UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. - UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. - UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. - UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. - UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. - UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. - UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. - UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. - UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. - UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. - UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. - UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. - UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. - UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. -} MRC_CH_TIMING; - -typedef struct { - UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group. - UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups. - UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM). - UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs. -} MRC_TA_TIMING; - -/// -/// Memory SMBIOS & OC Memory Data Hob -/// -typedef struct { - UINT8 Status; ///< See MrcDimmStatus for the definition of this field. - UINT8 DimmId; - UINT32 DimmCapacity; ///< DIMM size in MBytes. - UINT16 MfgId; - UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes - UINT8 RankInDimm; ///< The number of ranks in this DIMM. - UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. - UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. - UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. - UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. - UINT16 Speed; ///< The maximum capable speed of the device, in MHz. -} DIMM_INFO; - -typedef struct { - UINT8 Status; ///< Indicates whether this channel should be used. - UINT8 ChannelId; - UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. - MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. - DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. -} CHANNEL_INFO; - -typedef struct { - UINT8 Status; ///< Indicates whether this controller should be used. - UINT16 DeviceId; ///< The PCI device id of this memory controller. - UINT8 RevisionId; ///< The PCI revision id of this memory controller. - UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. - CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. - MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings - MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings - MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings - MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings -} CONTROLLER_INFO; - -typedef struct { - UINT8 Revision; - UINT16 DataWidth; ///< Data width, in bits, of this memory device - /** As defined in SMBIOS 3.0 spec - Section 7.18.2 and Table 75 - **/ - UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 - UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) - UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) - /** As defined in SMBIOS 3.0 spec - Section 7.17.3 and Table 72 - **/ - UINT8 ErrorCorrectionType; - - SiMrcVersion Version; - BOOLEAN EccSupport; - UINT8 MemoryProfile; - UINT32 TotalPhysicalMemorySize; - UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. - UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. - UINT8 Ratio; - UINT8 RefClk; - UINT32 VddVoltage[MAX_PROFILE_NUM]; - CONTROLLER_INFO Controller[MAX_NODE]; -} MEMORY_INFO_DATA_HOB; - -/** - Memory Platform Data Hob - - <b>Revision 1:</b> - - Initial version. - <b>Revision 2:</b> - - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields -**/ -typedef struct { - UINT8 Revision; - UINT8 Reserved[3]; - UINT32 BootMode; - UINT32 TsegSize; - UINT32 TsegBase; - UINT32 PrmrrSize; - UINT32 PrmrrBase; - UINT32 GttBase; - UINT32 MmioSize; - UINT32 PciEBaseAddress; -#ifdef CPU_CFL - UINT32 GdxcIotBase; - UINT32 GdxcIotSize; - UINT32 GdxcMotBase; - UINT32 GdxcMotSize; -#endif //CPU_CFL -} MEMORY_PLATFORM_DATA; - -typedef struct { - EFI_HOB_GUID_TYPE EfiHobGuidType; - MEMORY_PLATFORM_DATA Data; - UINT8 *Buffer; -} MEMORY_PLATFORM_DATA_HOB; - -#pragma pack (pop) - -#endif // _MEM_INFO_HOB_H_ |