diff options
Diffstat (limited to 'src/vendorcode')
75 files changed, 0 insertions, 56597 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f10/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index 27e57c1b93..0000000000 --- a/src/vendorcode/amd/agesa/f10/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,383 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 22910 $ @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $ -; -; **************************************************************************** -; * -; * Copyright (c) 2011, Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 4 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 6 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 3 - DB SocketID - DB ANY_CHANNEL - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 10 - DB SocketID - DB ChannelID - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 6 - DB SocketID - DB ANY_CHANNEL - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 11 - DB SocketID - DB ChannelID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO - DB PSO_LVDIMM_VOLT1_5_SUPPORT - DB 3 - DB ANY_SOCKET - DB ANY_CHANNEL - DB 1 -ENDM - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** diff --git a/src/vendorcode/amd/agesa/f10/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f10/Legacy/Proc/arch2008.asm deleted file mode 100644 index eb1f838ab5..0000000000 --- a/src/vendorcode/amd/agesa/f10/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2670 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 44323 $ $Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f10/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f10/Legacy/agesa.inc deleted file mode 100644 index c8985b0801..0000000000 --- a/src/vendorcode/amd/agesa/f10/Legacy/agesa.inc +++ /dev/null @@ -1,2466 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 47176 $ @e \$Date: 2011-02-15 19:56:01 -0700 (Tue, 15 Feb 2011) $ -; -; **************************************************************************** -; * -; * Copyright (c) 2011, Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeHardware EQU 1 ; < Hardware method - C1eModeMsgBased EQU 2 ; < Message-based method - MaxC1eMode EQU 3 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_DDI_LANES_CONFIGURATION EQU 20010005h ; DDI lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkSpeed UINT8 ? ; < Default boot up speed - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - Compliance UINT8 ? ; < Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_DATA ENDS - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - SB900 NutMeg DP-to-VGA - ; - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - MaxConnectorType EQU 8 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - MaxHotplug EQU 4 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - UNSUPPORTED_DDR_FREQUENCY EQU 934 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT1_5 EQU 0 ; < 1.5 Volt - VOLT1_35 EQU 1 ; < 1.35 Volt - VOLT1_25 EQU 2 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0xFF ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - - SbEOL EQU 13 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is/will be configured - RegDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is a registered DIMM - SODimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is a SO-DIMM - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 ? ; < Max Read Latency (ns) for the DCT - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..7, 1 = DIMM n contains x4 data devices. - Dimmx8Present UINT8 ? ; < For each bit n 0..7, 1 = DIMM n contains x8 data devices. - Dimmx16Present UINT8 ? ; < For each bit n 0..7, 1 = DIMM n contains x16 data devices. - - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..7, 1=DIMM n is valid and is/will be configured - DimmMirrorPresent UINT16 ? ; < For each bit n 0..7, 1=DIMM n is OnDimmMirror capable - DimmSpdCse UINT16 ? ; < For each bit n 0..7, 1=DIMM n SPD checksum error - DimmExclude UINT16 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..7, 1=DIMM n contains 1K page devices. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..7, 1=DIMM n contains x4 data devices. - Dimmx8Present UINT16 ? ; < For each bit n 0..7, 1=DIMM n contains x8 data devices. - Dimmx16Present UINT16 ? ; < For each bit n 0..7, 1=DIMM n contains x16 data devices. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - ; < 0 = 1.5v - ; < 1 = 1.35v - ; < 2 = 1.2v - ; < 0xFF = Mixed 1.5V and 1.2V in the system. 1.5V dimms get excluded - ; < from the system. - ; < - - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -; BIST (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. -PLATFORM_VRM_CONFIGURATION ENDS - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION {} ; < Several configuration settings for the voltage regulator module. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT8 ? ; < Lcd back light control - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < If CStateMode is C6, specifies a block of 8 free I/O ports to be used for - ; < placing the CPU in C6. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION {} ; < Several configuration settings for the voltage regulator module. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. -PLATFORM_CONFIGURATION ENDS - - ; P-state structure for each state -S_PSTATE_VALUES STRUCT - PStateEnable UINT32 ? ; < Pstate enable - CoreFreq UINT32 ? ; < MHz - Power UINT32 ? ; < milliWatts - IddValue UINT32 ? ; < Current value field - IddDiv UINT32 ? ; < Current divisor field -S_PSTATE_VALUES ENDS - - ; P-state structure for each core -S_PSTATE STRUCT - PStateMaxValue UINT8 ? ; < Max p-state number in this core - HtcPstateLimit UINT8 ? ; < Htc limit - HtcCapable UINT8 ? ; < Htc capable - Reserved UINT8 ? ; < Reserved - PStateStruct S_PSTATE_VALUES (1) DUP ({}) ; < P state struc -S_PSTATE ENDS - - ; P-state structure for each node -PSTATE_LEVELING STRUCT - SetPState0 UINT8 ? ; < If value = 0x55 (Don't set PState0) - TotalCoresInNode UINT8 ? ; < core number per node - PStateLevelingSizeOfBytes UINT16 ? ; < Size - OnlyOneEnabledPState BOOLEAN ? ; < Only P0 - InitStruct UINT8 ? ; < Init struc - AllCpusHaveIdenticalPStates BOOLEAN ? ; < Have Identical p state - CreateAcpiTables UINT8 ? ; < Create table flag - SocketNumber UINT8 ? ; < Physical socket number of this socket - Reserved UINT8 (3) DUP (?) ; < Reserved. - PStateCoreStruct S_PSTATE (1) DUP ({}) ; < P state core struc -PSTATE_LEVELING ENDS - - ; P-state structure for whole system -S_CPU_AMD_PSTATE STRUCT - TotalSocketInSystem UINT32 ? ; < Total node number in system - SizeOfBytes UINT32 ? ; < Structure size - PStateLevelingStruc PSTATE_LEVELING (1) DUP ({}) ; < P state level structure -S_CPU_AMD_PSTATE ENDS - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 3h - MAX_DIMMS_PER_SOCKET EQU 16 - - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Reserved2:3; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; ///< Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; ///< The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; ///< The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; ///< Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; ///< Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; ///< Serial Number. - PartNumber UINT8 (18) DUP (?) ; ///< Part Number. - Attributes UINT8 ? ; ///< Bits 7-4: Reserved, Bits 3-0: rank. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; ///< Socket ID -; OUT UINT8 Channel:2 ; ///< Channel ID -; OUT UINT8 Dimm:2 ; ///< DIMM ID -; OUT UINT8 DimmPresent:1 ; ///< Dimm Present - StartingAddr UINT32 ? ; ///< The physical address, in kilobytes, of a range - ; ///< of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; ///< The handle, or instance number, associated with - ; ///< the Memory Device structure to which this address - ; ///< range is mapped. -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_ONE EQU 4 ; < Level to 1 core - CORE_LEVEL_THREE EQU 5 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 6 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 7 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 8 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 9 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 10 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 11 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 12 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 13 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 14 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 15 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 16 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 17 ; < Level to 15 cores - CoreLevelModeMax EQU 18 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - - ; AGESA IDS NV ID Definitions - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure - - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0004h; < Enable or disable Channel Interleave - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0005h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0006h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 0007h; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 0008h; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 0009h; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Ah; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Bh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 000Ch; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 000Dh; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 000Eh; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 000Fh; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0010h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0011h; < Enable or disable DLLShutdown - - AGESA_IDS_NV_PROBEFILTER EQU 0012h; < Enable or Disable ProbeFilter - - AGESA_IDS_NV_HDTOUT EQU 0013h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 0014h; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 0015h; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 0016h; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 0017h; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 0018h; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 0019h; < Enable or disable GNB HD Audio - AGESA_IDS_EXT_ID_END EQU 001Ah; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f10/Legacy/amd.inc b/src/vendorcode/amd/agesa/f10/Legacy/amd.inc deleted file mode 100644 index d84e44d868..0000000000 --- a/src/vendorcode/amd/agesa/f10/Legacy/amd.inc +++ /dev/null @@ -1,461 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; -; **************************************************************************** -; * -; * Copyright (c) 2011, Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_LATE_RUN_AP_TASK EQU 00020010h - AMD_IDENTIFY_DIMMS EQU 00020011h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f10/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f10/Legacy/bridge32.inc deleted file mode 100644 index 5a26195316..0000000000 --- a/src/vendorcode/amd/agesa/f10/Legacy/bridge32.inc +++ /dev/null @@ -1,577 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; -; **************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f10/Lib/IA32/amdlib32.asm b/src/vendorcode/amd/agesa/f10/Lib/IA32/amdlib32.asm deleted file mode 100644 index a35ecdf0af..0000000000 --- a/src/vendorcode/amd/agesa/f10/Lib/IA32/amdlib32.asm +++ /dev/null @@ -1,624 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ - -public WriteIo8 -WriteIo8 PROC NEAR C USES DX AX Address:WORD, Data:Byte - mov dx, Address - mov al, Data - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ -public WriteIo16 -WriteIo16 PROC NEAR C USES DX AX Address:WORD, Data:WORD - mov dx, Address - mov ax, Data - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ - -public WriteIo32 -WriteIo32 PROC NEAR C USES DX EAX Address:WORD, Data:DWORD - mov dx, Address - mov eax, Data - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] - IO port address -; * @retval IO port Value -; */ -public ReadIo8 -ReadIo8 PROC NEAR C USES DX Address:WORD - mov dx, Address - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] Address IO port address -; * @retval IO port Value -; */ -public ReadIo16 -ReadIo16 PROC NEAR C USES DX Address:WORD - mov dx, Address - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] Address IO port address -; * @retval IO port Value -; */ -public ReadIo32 -ReadIo32 PROC NEAR C USES DX Address:WORD - mov dx, Address - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] Address MSR Address -; * @param[in] Data Pointer to data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdMsrRead -LibAmdMsrRead PROC NEAR C USES ECX ESI EDX Address:DWORD, Value:PTR, ConfigPtr:PTR - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov ecx, Address - rdmsr - mov esi, Value - mov [esi], eax - mov [esi+4], edx - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] Address MSR Address -; * @param[in] Data Pointer to data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdMsrWrite -LibAmdMsrWrite PROC NEAR C USES ECX ESI EDX Address:DWORD, Data:PTR, ConfigPtr:PTR - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov ecx, Address - mov esi, Data - mov eax, [esi] - mov edx, [esi+4] - wrmsr - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] Func CPUID function -; * @param[in] DATA Pointer to CPUID_DATA to save cpuid data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdCpuidRead -LibAmdCpuidRead PROC NEAR C Func:DWORD, DATA:PTR, ConfigPtr:PTR - pushad - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov eax, Func - cpuid - mov esi, DATA - mov [esi], eax - mov [esi+4], ebx - mov [esi+8], ecx - mov [esi+12],edx - popad - ret -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * -; */ - -public ReadTSC -ReadTSC PROC NEAR C - rdtsc - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Set FS_BASE -; * -; * -; * -; * @param[in] esi - Low Dword of physical address -; * @param[in] edi - High Dword of physical address -; */ -SetFsBase PROC NEAR PUBLIC USES EAX EBX ECX EDX EDI - - mov eax, ecx - mov ecx, 0C0010015h ; HWCR - rdmsr - mov ebx, eax - bts eax, 17 ; HWCR.Wrap32Dis - wrmsr - xchg edx, edi - mov eax, esi - mov esi, ebx - - mov ecx, 0C0000100h ; FS_BASE - wrmsr - ret - -SetFsBase ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Restore MSR0C001_0015 -; * -; * @param[in] esi - Low Dword -; * @param[in] edi - High Dword -; */ -RestoreHwcr PROC NEAR PUBLIC USES EAX ECX EDX - - mov ecx, 0C0010015h - mov eax, esi - mov edx, edi - wrmsr - ret - -RestoreHwcr ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] Address - Memory Address -; * @retval Memory byte at given address -; */ -Read64Mem8 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - call SetFsBase - xor ebx, ebx - mov al, fs:[ebx] - call RestoreHwcr - jmp Done -AccesBelow4G: - mov al, ds:[esi] -Done: - ret - -Read64Mem8 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] Address - Memory Address -; * @retval Memory word at given address -; */ -Read64Mem16 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - call SetFsBase - xor ebx, ebx - mov ax, fs:[ebx] - call RestoreHwcr - jmp Done -AccesBelow4G: - mov ax, ds:[esi] -Done: - - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] Address - Memory Address -; * @retval Memory dword at given address -; */ -Read64Mem32 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - call SetFsBase - xor ebx, ebx - mov eax, fs:[ebx] - call RestoreHwcr - jmp Done -AccesBelow4G: - mov eax, ds:[esi] -Done: - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ - -Write64Mem8 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD, Data:BYTE - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - call SetFsBase - xor ebx, ebx - mov al, Data - mov fs:[ebx], al - call RestoreHwcr - jmp Done -AccesBelow4G: - mov al, Data - mov ds:[esi], al -Done: - - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ -Write64Mem16 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD, Data:WORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - call SetFsBase - xor ebx, ebx - mov ax, Data - mov fs:[ebx], ax - call RestoreHwcr - jmp Done -AccesBelow4G: - mov ax, Data - mov ds:[esi], ax -Done: - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ -Write64Mem32 PROC NEAR C PUBLIC USES EBX EDI ESI FS Address:QWORD, Data:DWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - call SetFsBase - xor ebx, ebx - mov eax, Data - mov fs:[ebx], eax - call RestoreHwcr - jmp Done -AccesBelow4G: - mov eax, Data - mov ds:[esi], eax - -Done: - - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] Reg Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] Value Value to write -; */ - -LibAmdReadCpuReg PROC NEAR C Reg:BYTE, Value:NEAR PTR DWORD - pushad - push ds - - .if(Reg == 00h) - mov eax, cr0 - .elseif(Reg == 04h) - mov eax, cr4 - .elseif(Reg == 10h) - mov eax, dr0 - .elseif(Reg == 11h) - mov eax, dr1 - .elseif(Reg == 12h) - mov eax, dr2 - .elseif(Reg == 13h) - mov eax, dr3 - .elseif(Reg == 17h) - mov eax, dr7 - .else - xor eax,eax - .endif - - mov edi, Value - mov [edi], eax - - pop ds - popad - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] Reg Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] Value Value to write -; */ - -LibAmdWriteCpuReg PROC NEAR C Reg:BYTE, Value:DWORD - mov eax, Value - - .if(Reg == 00h) - mov cr0, eax - .elseif(Reg == 4) - mov cr4, eax - .elseif(Reg == 10h) - mov dr0, eax - .elseif(Reg == 11h) - mov dr1, eax - .elseif(Reg == 12h) - mov dr2, eax - .elseif(Reg == 13h) - mov dr3, eax - .elseif(Reg == 17h) - mov dr7, eax - .endif - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC NEAR C - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC NEAR C -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC NEAR C - pushad - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popad - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] Address IO Port Address -; * @param[in] Value Value to write -; * @param[in] Flag IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC NEAR C Address:DWORD, Value:DWORD ,Flag:DWORD - push edx - push eax - push ebx - mov edx, Address - mov eax, Value - mov ebx, Flag - out dx, eax - pop ebx - pop eax - pop edx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC NEAR C - - pushad - - mov ecx, 0C001100Ah ;bit 0 = HDT redirect - mov edi, 09C5A203Ah ;Password - RDMSR ; - or al, 1 ; - WRMSR ; - mov al, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - popad - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with . -; * -; * @param[in] Value Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC NEAR C Value:DWORD - mov eax, Value - bsf eax, Value - .if (Zero?) - mov al,32 - .endif - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] Value Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC NEAR C Value:DWORD - mov eax, Value - bsr eax, Value - .if (Zero?) - mov al,0FFh - .endif - ret -LibAmdBitScanReverse ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Lib/IA32/ms_shift.asm b/src/vendorcode/amd/agesa/f10/Lib/IA32/ms_shift.asm deleted file mode 100644 index 7fe47c0382..0000000000 --- a/src/vendorcode/amd/agesa/f10/Lib/IA32/ms_shift.asm +++ /dev/null @@ -1,110 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the right. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_aullshr PROC NEAR C PUBLIC - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov eax, edx - xor edx, edx - .endif - shrd eax, edx, cl - shr edx, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_aullshr ENDP - -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the left. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_allshl PROC NEAR C PUBLIC USES CX - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov edx, eax - xor eax, eax - .endif - shld edx, eax, cl - shl eax, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_allshl ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Lib/IA32/msmemcpy.asm b/src/vendorcode/amd/agesa/f10/Lib/IA32/msmemcpy.asm deleted file mode 100644 index bd8bc61100..0000000000 --- a/src/vendorcode/amd/agesa/f10/Lib/IA32/msmemcpy.asm +++ /dev/null @@ -1,84 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -; void *memcpy( void *dest, void *src, size_t count ); -; -; Copy count bytes from src to dest, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memcpy -memcpy PROC NEAR C PUBLIC USES ECX EDI ESI dest:DWORD, src:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov esi, src - mov ecx, count - rep movsb - mov eax, dest - popf - ret -memcpy ENDP - -; void *memset( void *dest, int c, size_t count ); -; -; At dest, set count bytes to byte value, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memset -memset PROC NEAR C PUBLIC USES ECX EDI dest:DWORD, value:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov eax, value - mov ecx, count - rep stosb - mov eax, edi - popf - ret -memset ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Lib/x64/amdlib64.asm b/src/vendorcode/amd/agesa/f10/Lib/x64/amdlib64.asm deleted file mode 100644 index 7ed3d1005a..0000000000 --- a/src/vendorcode/amd/agesa/f10/Lib/x64/amdlib64.asm +++ /dev/null @@ -1,569 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 64bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.code -;/*++ - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] CX IO port address -; * @param[in] DL IO port Value -; */ - -PUBLIC WriteIo8 -WriteIo8 PROC - mov al, dl - mov dx, cx - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] CX IO port address -; * @param[in] DX IO port Value -; */ -PUBLIC WriteIo16 -WriteIo16 PROC - mov ax, dx - mov dx, cx - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] CX IO port address -; * @param[in] EDX IO port Value -; */ - -PUBLIC WriteIo32 -WriteIo32 PROC - mov eax, edx - mov dx, cx - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] CX IO port address -; * @retval AL IO port Value -; */ -PUBLIC ReadIo8 -ReadIo8 PROC - mov dx, cx - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] CX IO port address -; * @retval AX IO port Value -; */ -PUBLIC ReadIo16 -ReadIo16 PROC - mov dx, cx - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] CX IO port address -; * @retval EAX IO port Value -; */ -PUBLIC ReadIo32 -ReadIo32 PROC - mov dx, cx - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrRead -LibAmdMsrRead PROC - push rsi - mov rsi, rdx - rdmsr - mov [rsi], eax - mov [rsi+4], edx - pop rsi - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrWrite -LibAmdMsrWrite PROC - push rsi - mov rsi, rdx - mov eax, [rsi] - and rax, 0ffffffffh - mov edx, [rsi+4] - and rdx, 0ffffffffh - wrmsr - pop rsi - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] RCX CPUID function -; * @param[in] RDX Pointer to CPUID_DATA to save cpuid data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdCpuidRead -LibAmdCpuidRead PROC - - push rbx - push rsi - mov rsi, rdx - mov rax, rcx - cpuid - mov [rsi], eax - mov [rsi+4], ebx - mov [rsi+8], ecx - mov [rsi+12],edx - pop rsi - pop rbx - ret - -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * @retval RAX Time stamp counter value -; */ - -PUBLIC ReadTSC -ReadTSC PROC - rdtsc - and rax, 0ffffffffh - shl rdx, 32 - or rax, rdx - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] RCX - Memory Address -; * @retval Memory byte at given address -; */ -PUBLIC Read64Mem8 -Read64Mem8 PROC - - xor rax, rax - mov al, [rcx] - ret - -Read64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] RCX - Memory Address -; * @retval Memory word at given address -; */ -PUBLIC Read64Mem16 -Read64Mem16 PROC - - xor rax, rax - mov ax, [rcx] - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] RCX - Memory Address -; * @retval Memory dword at given address -; */ -PUBLIC Read64Mem32 -Read64Mem32 PROC - - xor rax, rax - mov eax, [rcx] - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] RCX Memory Address -; * @param[in] DL Value to write -; */ - -PUBLIC Write64Mem8 -Write64Mem8 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], al - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] RCX Memory Address -; * @param[in] DX Value to write -; */ -PUBLIC Write64Mem16 -Write64Mem16 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], ax - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] RCX Memory Address -; * @param[in] EDX Value to write -; */ -PUBLIC Write64Mem32 -Write64Mem32 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], eax - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Pointer to value -; */ - -PUBLIC LibAmdReadCpuReg -LibAmdReadCpuReg PROC - - push rax - xor rax, rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - jmp RegRead -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - jmp RegRead -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - jmp RegRead -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - jmp RegRead -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - jmp RegRead -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - jmp RegRead -Reg17h: - cmp cl, 17h - jne RegRead - mov rax, dr7 -RegRead: - mov [rdx], eax - pop rax - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Value to write -; */ - -PUBLIC LibAmdWriteCpuReg -LibAmdWriteCpuReg PROC - - push rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - mov eax, edx - mov cr0, rax - jmp Done -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - mov eax, edx - mov cr4, rax - jmp Done -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - mov eax, edx - mov dr0, rax - jmp Done -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - mov eax, edx - mov dr1, rax - jmp Done -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - mov eax, edx - mov dr2, rax - jmp Done -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - mov eax, edx - mov dr3, rax - jmp Done -Reg17h: - cmp cl, 17h - jne Done - mov rax, dr7 - mov eax, edx - mov dr7, rax -Done: - pop rax - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC - pushfq - mov rax, 0BACCD00Bh ; Backdoor in SimNow - mov rbx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popfq - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] ECX IO Port Address -; * @param[in] EDX Value to write -; * @param[in] R8D IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC - push rbx - push rax - - mov ebx, r8d - mov eax, edx - mov edx, ecx - out dx, eax - - pop rax - pop rbx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC - - push rbx - - mov rcx, 0C001100Ah ;bit 0 = HDT redirect - mov rdi, 09C5A203Ah ;Password - rdmsr - and rax, 0ffffffffh - or rax, 1 - - wrmsr - - mov rax, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - pop rbx - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC - bsf eax, ecx - jnz nonZeroSource - mov al,32 -nonZeroSource: - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC - bsr eax, ecx - jnz nonZeroSource - mov al,0FFh -nonZeroSource: - ret -LibAmdBitScanReverse ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD32.asm b/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD32.asm deleted file mode 100644 index ddd937ab66..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD32.asm +++ /dev/null @@ -1,113 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; PciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -F10RevDProbeFilterCritical PROC NEAR C PUBLIC USES EAX ECX EDX, PciAddress:DWORD, PciRegister:DWORD - - mov ecx, 0C001001Fh - rdmsr - push eax - push ecx - push edx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, PciRegister - mov edx, PciAddress - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dx, 0CF8h ; Set Reg Config Space - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax ; move data to return position - db 0Fh, 0AEh, 0F0h ; MFENCE - - pop edx - pop ecx - pop eax - wrmsr - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD64.asm b/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD64.asm deleted file mode 100644 index 2804d29153..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/RevD/F10RevD64.asm +++ /dev/null @@ -1,127 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; PciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC F10RevDProbeFilterCritical -F10RevDProbeFilterCritical PROC - - push rax - push rcx - push rdx - push rsi - push rdi - - mov esi, ecx - mov edi, edx - - mov ecx, 0C001001Fh - rdmsr - push rax - push rcx - push rdx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, edi - mov edx, esi - - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - mfence - - mov dx, 0CF8h ; Set Reg Config Space - mfence - - out dx, eax - mfence - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - mfence - - out dx, eax ; move data to return position - mfence - - pop rdx - pop rcx - pop rax - wrmsr - - pop rdi - pop rsi - pop rdx - pop rcx - pop rax - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f10/Proc/CPU/cahalt.asm deleted file mode 100644 index e92c94517f..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/CPU/cahalt.asm +++ /dev/null @@ -1,319 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE cpcarmac.inc - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y A B S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE -;====================================================================== -; ExecuteFinalHltInstruction: Disables the stack and performs -; a hlt instruction on an AP. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteFinalHltInstruction PROC NEAR C PUBLIC - - pop esi ; StdHeader - pop esi ; pointer to ApMtrrSettingsList, set through build configuration - - mov eax, CR0 ; Make sure cache is disabled for all APs - or eax, CR0_CD OR CR0_NW ; Disable cache - mov cr0, eax ; Write back to CR0 - - ; Configure the MTRRs on the AP so - ; when it runs remote code it will execute - ; out of RAM instead of ROM. - - ; Disable MTRRs and turn on modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - btr eax, MtrrVarDramEn ; Disable - bts eax, MtrrFixDramModEn ; Enable - btr eax, MtrrFixDramEn ; Disable - bts eax, SysUcLockEn - _WRMSR - - ; Setup default values for Fixed-Sized MTRRs - ; Set 7FFFh-00000h as WB - mov ecx, AMD_AP_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR - - ; Set 9FFFFh-80000h also as WB - mov ecx, AMD_AP_MTRR_FIX16k_80000 - _WRMSR - - ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO - mov ecx, AMD_AP_MTRR_FIX16k_A0000 - xor eax, eax - xor edx, edx - _WRMSR - - ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO - xor eax, eax - xor edx, edx - mov ecx, AMD_AP_MTRR_FIX4k_C0000 - -CDLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_D8000 - jbe CDLoop - - ; Set FFFFFh-E0000h as Uncacheable Memory - mov eax, 18181818h - mov edx, eax - - mov ecx, AMD_AP_MTRR_FIX4k_E0000 - -EFLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_F8000 - jbe EFLoop - - ; If IBV provided settings for Fixed-Sized MTRRs, - ; overwrite the default settings. - .if (esi != 0) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - ; While we are not at the end of the list - .while (ecx != CPU_LIST_TERMINAL) - ; Ensure that the MSR address is valid for Fixed-Sized MTRRs - .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \ - (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000)) - mov eax, dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData - mov edx, dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData - _WRMSR - .endif - add esi, sizeof (AP_MTRR_SETTINGS) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - .endw - .endif - - ; restore variable MTRR6 and MTRR7 to default states - mov ecx, AMD_MTRR_VARIABLE_BASE6 ; clear MTRRPhysBase6 MTRRPhysMask6 - xor eax, eax ; and MTRRPhysBase7 MTRRPhysMask7 - xor edx, edx - .while (cl < 010h) - _WRMSR - inc cl - .endw - - ; Enable fixed-range and variable-range MTRRs - mov ecx, AMD_MTRR_DEFTYPE - _RDMSR - or ax, 0C00h ; Set Fixed-Range Enable (FE) and MTRR Enable (E) bits - _WRMSR - - ; Enable Top-of-Memory setting - ; Enable use of RdMem/WrMem bits attributes - mov ecx, MTRR_SYS_CFG - _RDMSR - bts eax, MtrrVarDramEn ; Enable - btr eax, MtrrFixDramModEn ; Disable - bts eax, MtrrFixDramEn ; Enable - _WRMSR - - ; Enable the self modifying code check buffer and Enable hardware prefetches - mov ecx, 0C0011022h - _RDMSR - btr eax, DC_DIS_SPEC_TLB_RLD ; Disable speculative TLB reloads bit - btr eax, DIS_CLR_WBTOL2_SMC_HIT ; Disable the self modifying code check buffer bit - btr eax, DIS_HW_PF ; Disable hardware prefetches bit - _WRMSR - - dec cx ; MSRC001_1021 Instruction Cache Configuration Register (IC_CFG) - _RDMSR - btr eax, IC_DIS_SPEC_TLB_RLD ; turn on Disable speculative TLB reloads bit - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable L3 cache to accept clear lines - - xor eax, eax - -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteHltInstruction PROC NEAR C PUBLIC - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -NmiHandler PROC NEAR C PUBLIC - iretd -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -GetCsSelector PROC NEAR C PUBLIC, CsSelector:PTR - push ax - push ebx - - call FarCallGetCs - mov ebx, CsSelector - mov [ebx], ax - pop ebx - pop ax - ret -GetCsSelector ENDP - -;====================================================================== -; FarCallGetCs: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -; WARNING: This routine has a mirror routine in the PREMEM segment. -; These two routines MUST be sync'd for content. -;====================================================================== -FarCallGetCs PROC FAR PRIVATE - - mov ax, ss:[esp + 4] - retf - -FarCallGetCs ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -; WARNING: This routine has a mirror routine in the PREMEM segment. -; These two routines MUST be sync'd for content. -;====================================================================== -SetIdtr PROC NEAR C PUBLIC USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - lidt fword ptr ss:[ebx] - ret -SetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -ExecuteWbinvdInstruction PROC NEAR C PUBLIC - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib32.asm b/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib32.asm deleted file mode 100644 index 6cd8a28a96..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib32.asm +++ /dev/null @@ -1,138 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 32bit -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 14305 $ @e \$Date: 2009-05-24 02:20:55 +0800 (Sun, 24 May 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -public IdsDelay -IdsDelay PROC NEAR C USES EAX EDX -Local targetedx:dword, targeteax:dword - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - mov targetedx,edx - mov targeteax,eax - - rdtsc -;set "Si!=0" skip below loop - .while(1) - .if(si != 0) - jmp delay_exit - .endif - .if(edx > targetedx) - jmp delay_exit - .elseif (edx == targetedx) - .if(eax > targeteax) - jmp delay_exit - .endif - .endif - rdtsc - .endw -delay_exit: - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC NEAR C filecode:dword -local tmpebx:dword,tmpedx:dword - pushad - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, filecode - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov ebx,0dead0000h - mov edx,filecode - ror edx,16 - mov bx,dx - mov dx,0 -;ebx:edx = deadxxxxyyyy0000 xxxx is the filecode yyyy is the line num - mov tmpebx,ebx - mov tmpedx,edx - - xor eax,eax - mov cl,6 - - .while((cl != 0) && (si == 0)) - .if(cl <= 2) - shld eax,edx,8 - shl edx,8 - .else - shld eax,ebx,8 - shl ebx,8 - .endif - - out 80h,eax - call IdsDelay - dec cl - .if(cl == 0) - mov cl,6 - mov ebx,tmpebx - mov edx,tmpedx - .endif - .endw - - popad - xor eax,eax - ret -IdsErrorStop endp - - -END diff --git a/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib64.asm b/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib64.asm deleted file mode 100644 index cec2bd8a32..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/IDS/Control/IdsLib64.asm +++ /dev/null @@ -1,143 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 64bit -; * -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 14126 $ @e \$Date: 2009-05-21 23:02:32 +0800 (Thu, 21 May 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.code -IdsDelay PROC - push rax - push rdx - push rbx - xor rax,rax - xor rdx,rdx - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - shl rdx,32 - add rdx,rax - mov rbx,rdx -;rbx store the target -;set "Si!=0" skip below loop -__loop: - cmp si,0 - jnz __loopexit - rdtsc - shl rdx,32 - add rdx,rax - cmp rdx,rbx - jae __loopexit - jmp __loop -__loopexit: - pop rbx - pop rdx - pop rax - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC -;As x64 calling convention RCX is used as input parameters - push rcx - push rbx - push si - push dx - push rbx - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, ecx - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov rax,0dead00000000h - or rcx,rax -;rcx= 0dead__FILECODE - shl rcx,16 -;rcx= 0dead__FILECODE__0000 - mov rbx,rcx - - xor rax,rax - mov dl,6 - -IdsErrorStopLoop: - cmp dl,0 - jz IdsErrorStopExit - cmp si,0 - jnz IdsErrorStopExit - - shld rax,rcx,8 - shl rcx,8 - out 80h,eax - call IdsDelay - - dec dl - cmp dl,0 - jnz _nextloop - mov dl,6 - mov rcx,rbx -_nextloop: - jmp IdsErrorStopLoop -IdsErrorStopExit: - pop rbx - pop dx - pop si - pop rbx - pop rcx - xor rax,rax - ret -IdsErrorStop endp -END - diff --git a/src/vendorcode/amd/agesa/f10/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f10/Proc/Mem/Main/mu.asm deleted file mode 100644 index fe4c86b604..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/Mem/Main/mu.asm +++ /dev/null @@ -1,483 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 443#$ $Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; Description: Main memory controller system configuration for AGESA -; -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;memUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written -; -; Out: -; -; All registers preserved. -;=============================================================================== -MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemUOutPort ENDP - - -;---------------------------------------------------------------------------- -; _SFENCE(); -; -_SFENCE macro - db 0Fh,0AEh,0F8h - endm - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemUWriteCachelines: -; Write a test pattern to DRAM -; -; In: Pattern - pointer to the write pattern -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - xor ecx, ecx - mov cx,ClCount - shl ecx,2 - @@: - db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemUWriteCachelines ENDP - -;=============================================================================== -;MemUReadCachelines: -; -; Read a pattern of 72 bit times (per DQ), to test dram functionality. The -;pattern is a stress pattern which exercises both ISI and crosstalk. The number -;of cache lines to fill is dependent on DCT width mode and burstlength. -; -; In: Buffer - pointer to a buffer where read data will be stored -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL Count:BYTE - pushad - ; First, issue continuous dummy reads to fill up the cache - mov eax,Address - .if (ClCount > 18) - mov cx,ClCount - shr cx,4 - mov Count,cl - .while (Count != 0) - push eax - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - pop eax - add eax,(16*64) ;Next 16CL - dec Count - .endw - .else - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - .if(ClCount == 1) - _MFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - .elseif(ClCount == 3) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - .elseif(ClCount == 6) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - .elseif(ClCount == 9) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - .elseif(ClCount == 18) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - mov eax,fs:[edx] ;TestAddr+16 cache lines - _MFENCE - mov eax,fs:[edx+64] ;TestAddr+17 cache lines - _MFENCE - .endif - .endif - _MFENCE - - ; Then, copy data to buffer - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - xor ecx, ecx - mov cx,ClCount - shl ecx,6 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemUReadCachelines ENDP - -;=============================================================================== -;MemUDummyCLRead: -; -; Perform a single cache line read from a given physical address. -; -; In: Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD - _SFENCE - pushad - mov eax,Address - mov dl,fs:[eax] - popad - ret -MemUDummyCLRead ENDP - -;=============================================================================== -;MemUFlushPattern: -; -; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used -;to ensure cache miss on the next read training. -; -; In: Address - Physical address to be flushed -; ClCount - number of cachelines to be flushed -; Out: -; -;All registers preserved. -;=============================================================================== -MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD - pushad - mov edi,Address - movzx ecx,ClCount - @@: - _MFENCE ; Force strong ordering of clflush - db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi] - _MFENCE - add edi,64 - loop @B - popad - ret -MemUFlushPattern ENDP - - -;=============================================================================== -;MemUGetWrLvNblErr: -; Read ClCount number of cachelines then return the bitmap that indicates -; the write leveling result of each byte lane. -; -; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result -; Address - Physical address to be sampled -; ClCount - number of cachelines to be read -; -; OUT: ErrBitmap - WL result -; -;All registers preserved -;=============================================================================== -MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL ZeroCount[32]:WORD - - pushad - mov esi,Address - _EXECFENCE - ;Cache fill - movzx ecx,ClCount - @@: - mov eax,fs:[esi] - add esi,64 - loop @B - _MFENCE - - ; Then, count the number of 0's - ;push es - ;push ss - ;pop es - lea edi,ZeroCount - mov cx,SIZEOF ZeroCount - mov al,0 - rep stosb - ;pop es - - mov esi,Address - lea edi,ZeroCount - mov cx,ClCount - shl cx,6 - .while(cx > 0) - mov al,fs:[esi] - test al,00Fh ;check lower nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - test al,0F0h ;check upper nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - inc esi - dec cx - test cx,07h - .if(ZERO?) - sub edi,(16*2) - sub cx,8 - add esi,8 - .endif - .endw - - ; Then, average and compress data to error bits - lea esi,ZeroCount - mov dx,ClCount - shl dx,1 - xor eax,eax - xor ecx,ecx - mov cl,0 - .while(cl<16) - .if(WORD PTR [esi] < dx) - bts eax,ecx - .endif - add esi,2 - inc cl - .endw - xor edx,edx - mov dx,WORD PTR ErrBitmap - mov [edx], ax - - popad - ret -MemUGetWrLvNblErr ENDP - -;=============================================================================== -;AlignPointerTo16Byte: -; Modifies BufferPtr to be 16 byte aligned -; -; In: BufferPtrPtr - Pointer to buffer pointer -; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned -; -;All registers preserved. -;=============================================================================== -AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD - push edx - push eax - mov edx, BufferPtrPtr - mov eax, [edx] - add eax, 16 - and ax, 0FFF0h - mov [edx], eax - pop eax - pop edx - ret -AlignPointerTo16Byte ENDP - - END - diff --git a/src/vendorcode/amd/agesa/f10/Proc/Recovery/Mem/mru.asm b/src/vendorcode/amd/agesa/f10/Proc/Recovery/Mem/mru.asm deleted file mode 100644 index 725bd94261..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/Recovery/Mem/mru.asm +++ /dev/null @@ -1,187 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 443#$ $Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; Description: Main memory controller system configuration for AGESA DDR 2 -; -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;MemRecUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written to port -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemRecUOutPort ENDP - - - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemRecUWrite1CL: -; -; Write data from buffer to a system address -; -; In: Address - System address to read from -; Pattern - pointer pattern. -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUWrite1CL PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - mov ecx,4 - @@: - db 66h,0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h,66h,0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemRecUWrite1CL ENDP - -;=============================================================================== -;MemRecURead1CL: -; -; Read one cacheline to buffer -; -; In: Buffer - pointer buffer. -; : Address - System address to read from -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecURead1CL PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD - - pushad - - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - mov ecx,64 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemRecURead1CL ENDP - - -;=============================================================================== -;MemRecUFlushPattern: -; -; Flush one cache line -; -; In: Address - System address [31:0] -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUFlushPattern PROC CALLCONV PUBLIC Address:DWORD - pushad - mov eax,Address - _EXECFENCE - ;clflush fs:[eax] - db 064h ;access relative to FS BASE prefix - db 00Fh ;opcode - db 0AEh ;opcode - db 038h ;eax indirect addressing - _MFENCE - popad - ret -MemRecUFlushPattern ENDP - - - - END - diff --git a/src/vendorcode/amd/agesa/f10/cpcarmac.inc b/src/vendorcode/amd/agesa/f10/cpcarmac.inc deleted file mode 100644 index e893d1ef8b..0000000000 --- a/src/vendorcode/amd/agesa/f10/cpcarmac.inc +++ /dev/null @@ -1,406 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: cpcarmac.inc $Revision:: 44323 $ $Date:: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ -; -; Description: Code to setup and break down cache-as-stack -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE cpcar.inc - .LIST - .586P - -;====================================================================== -; AMD_ENABLE_STACK: Setup a stack -; -; In: -; none -; -; Out: -; SS:ESP - Our new private stack location -; 4000:3FFC - for BSP (16K Stack) -; 4000:7FFC - for core0 of node1 (16K Stack) -; 4000:BFFC - for core0 of node2 (16K Stack) -; 4000:FFFC - for core0 of node3 (16K Stack) -; 5000:3FFC - for core0 of node4 (16K Stack) -; 5000:7FFC - for core0 of node5 (16K Stack) -; 5000:BFFC - for core0 of node6 (16K Stack) -; 5000:FFFC - for core0 of node7 (16K Stack) -; -; 6000:1FFC - for core1 node0 (4k stack) -; 6000:2FFC - for core2 node0 (4k stack) -; ... -; 9000:8FFC - for core7 of node7 (4k stack) ......... max of 64 cores in system -; -; EAX = AGESA_STATUS -; -; ECX = Stack size in bytes -; -; Requirements: -; * This routine presently is limited to a max of 64 processors -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, edi, esi, ds, es -; -;====================================================================== -AMD_ENABLE_STACK MACRO - - local SetupStack - local SetupDramMap - local get_SS_ESP - local r16bmode - local p32mode - local init_stack - -; Note that SS:ESP will be default stack. Note that this stack -; routine will not be used after memory has been initialized. Because -; of its limited lifetime, it will not conflict with typical PCI devices. - - mov esp, ebx ; put return address in a safe place - - ; get node id and core id of current executing core - mov si, -1 - GET_NODE_ID_CORE_ID - movzx edi, di - - ; determine if stack is already enabled. - mov eax, cr0 - test eax, 60000000h - jnz SetupStack - mov ecx, AMD_MTRR_DEFTYPE - _RDMSR - test ah, 0Ch - jz SetupStack - or edi, 0FFFF0000h ; indicate stack has already been initialized - jmp get_SS_ESP - -SetupStack: - ; Enable routing tables on BSP (just in case the HT init code has not yet enabled them) - mov eax, 8000C06Ch - mov dx, 0CF8h - out dx, eax - add dx, 4 - in eax, dx - btr eax, 0 - out dx, eax - - ; Setup temporary DRAM map for CAS on all nodes - mov eax, 8000C060h ; Get NodeCnt from BSP - mov dx, 0CF8h - out dx, eax - add dx, 4 - in al, dx - shr ax, 4 - and al, 7 - mov cl, al - - mov ebx, 8000C144h -SetupDramMap: - mov eax, ebx ; Set 0000_0000 to 00FF_FFFF as DRAM - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 0 - out dx, eax - - mov eax, ebx - sub eax, 4 - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 3 - out dx, eax - - add bh, 8 - dec cl - jns SetupDramMap - - ; Disable the self modifying code check buffer and Disable hardware prefetches - mov ecx, 0C0011022h - _RDMSR - bts eax, DC_DIS_SPEC_TLB_RLD ; turn on Disable speculative TLB reloads bit - bts eax, DIS_CLR_WBTOL2_SMC_HIT ; turn on Disable the self modifying code check buffer bit - bts eax, DIS_HW_PF ; turn on Disable hardware prefetches bit - _WRMSR - dec cx ; MSRC001_1021 Instruction Cache Configuration Register (IC_CFG) - _RDMSR - bts eax, IC_DIS_SPEC_TLB_RLD ; turn on Disable speculative TLB reloads bit - _WRMSR - - AMD_ENABLE_STACK_FAMILY_HOOK ; Disable L3 cache to accept clear lines - - ; Init CPU MSRs for our init routines - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - and eax, 0FFE3FFFFh ; turn off MTRR enable bits - bts eax, MtrrFixDramModEn ; turn on modification enable bit - _WRMSR - - ; clear all variable and Fixed MTRRs - mov ecx, 200h - xor eax, eax - xor edx, edx - .while (cl != 10h) ; MTRRphysBasen and MTRRphysMaskn - _WRMSR - inc cl - .endw - mov cl, 50h ; MTRRfix64K_00000 - _WRMSR - mov cl, 58h ; MTRRfix16K_80000 - _WRMSR - mov cl, 59h ; MTRRfix16K_A0000 - _WRMSR - mov cl, 68h ; MTRRfix4K_C0000 to MTRRfix4K_F8000 - .while (cl != 70h) - _WRMSR - inc cl - .endw - - ; setup MTRR for stacks - mov ebx, WB_DRAM_TYPE - .if (di == 0) ;core 0 - .if (si > 3) ; node 0 to 3 located at 40000h, node 4 to 7 located at 50000h - shl ebx, 8 - .endif - mov ecx, AMD_MTRR_FIX64k_00000 - _RDMSR - or edx, ebx - _WRMSR - .else ;core 1 to core 7 start at 60000h - .if (si < 4) ; node 0 to 3 using AMD_MTRR_FIX64K_6000 and AMD_MTRR_FIX64K_7000 MTRR - shl ebx, 16 - .if (si > 1) - shl ebx, 8 - .endif - mov ecx, AMD_MTRR_FIX64k_00000 - _RDMSR - or edx, ebx - _WRMSR - .else ; node 4 to 7 uses AMD_MTRR_FIX16K_80000 and AMD_MTRR_FIX16K_9000 MTRR - mov ecx, AMD_MTRR_FIX16k_80000 - _RDMSR - .if (si < 6) ; node 4 and node 5 - .if (si == 4) ; node 4 - .if (di >= 4) - shl ebx, 8 - .endif - .else ; node 5 - shl ebx, 16 - .if (di >= 4) - shl ebx, 8 - .endif - .endif - or eax, ebx - _WRMSR - .else ; node 6 and node 7 - .if (si == 6) ; node 6 - .if (di >= 4) - shl ebx, 8 - .endif - .else ; node 7 - shl ebx, 16 - .if (di >= 4) - shl ebx, 8 - .endif - .endif - or edx, ebx - _WRMSR - .endif - .endif - .endif - - ; Clear IORRs, TOP_MEM and TOM2 - xor eax, eax - xor edx, edx - - mov ecx, 0C0010016h ;IORRBase0 - .while (cl != 1Bh) - _WRMSR - inc cl - .endw - mov cl, 1Dh - _WRMSR - - ; Enable MTRRs - mov ecx, 02FFh ; MTRRdefType - mov ah, 0Ch ; MtrrDefTypeEn and MtrrDefTypeFixEn - _WRMSR - - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - bts eax, MtrrFixDramEn ; MtrrFixDramEn - btr eax, MtrrFixDramModEn ; turn off modification enable bit - _WRMSR - - ; Enable caching in CR0 - mov eax, CR0 ; Enable WT/WB cache - btr eax, 31 ; make sure paging is disabled - btr eax, 30 ; Clear CR0 NW and CD - btr eax, 29 - mov CR0, eax - -get_SS_ESP: - ; allocate space for stacks - xor cx, cx - xor edx, edx - .if (di == 0) ;core 0 - mov eax, CORE0_STACK_BASE_ADDR - .while (cx <= si) - add eax, 4000h - inc cx - .endw - mov edx, eax - sub eax, 4000h - and eax, 0F0000h - sub edx, 4 - and edx, 0FFFFh - mov bx, CORE0_STACK_SIZE / 4 - .else ;core 1 to core 7 start at 60000h - mov eax, CORE1_STACK_BASE_ADDR ; core 1 stack starts at 60000h - .while (cx <= si) - add eax, 8000h ; 32k for each node - inc cx - .endw - sub eax, 8000h - mov dx, ax - and eax, 0F0000h - xor cx, cx - .while (cx <= di) - add edx, 1000h ; 4k for APs - inc cx - .endw - sub edx, 4 - mov bx, CORE1_STACK_SIZE / 4 - .endif - - ; Allocate stack and set ESP - mov ecx, CR0 ; check for 32-bit protect mode - test ecx, 1 ; PE bit - jz r16bmode ; PE=0, real mode - mov cx, cs ; PE=1 - cmp cx, 0D000h ; check for CS - jb p32mode ; if CS < D000, it is a selector instead of a segment -r16bmode: - shr eax, 4 ; ax = ss, ds, es - mov ss, ax - mov ds, ax - mov es, ax - jmp init_stack -p32mode: - add edx, eax ; linear address of the stack -init_stack: - - .if ( !(edi & 0FFFF0000h)) - std - xor ecx, ecx - mov cx, bx - mov esi, edx - rep lods DWORD PTR [esi] - xor eax, eax - mov cx, bx - mov edi, edx - rep stos DWORD PTR [edi] - cld - xor eax, eax ; eax = 0 : no error - .else - mov eax, 40000001h ; eax = AGESA_WARNING (Stack has already been set up) - .endif - - mov cx, bx ; ecx = size in dwords - shl ecx, 2 ; ecx = size in bytes - - mov ebx, esp - mov esp, edx - - -ENDM - -;====================================================================== -; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -; should only be executed on the BSP -; -; In: -; none -; -; Out: -; EAX = AGESA_STATUS -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, esp -;====================================================================== -AMD_DISABLE_STACK MACRO - - mov esp, ebx ; save return address - - ; Turn on modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - bts eax, MtrrFixDramModEn ; Enable - _WRMSR - - ; Disable MTRRs and turn on modification enable bit - mov ecx,AMD_MTRR_FIX64k_00000 - mov eax,1E1E1E1Eh - mov edx,eax - _WRMSR ; 0 - 512K = WB Mem - mov cl,58h - _WRMSR ; 512K - 640K = WB Mem - - ; Turn off modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - btr eax, MtrrFixDramModEn ; Disable - _WRMSR - - ; Enable the self modifying code check buffer and Enable hardware prefetches - mov ecx, 0C0011022h - _RDMSR - btr eax, DC_DIS_SPEC_TLB_RLD ; Disable speculative TLB reloads bit - btr eax, DIS_CLR_WBTOL2_SMC_HIT ; Disable the self modifying code check buffer bit - btr eax, DIS_HW_PF ; Disable hardware prefetches bit - _WRMSR - - dec cx ; MSRC001_1021 Instruction Cache Configuration Register (IC_CFG) - _RDMSR - btr eax, IC_DIS_SPEC_TLB_RLD ; turn on Disable speculative TLB reloads bit - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable L3 cache to accept clear lines - - mov ebx, esp - xor eax, eax - -ENDM diff --git a/src/vendorcode/amd/agesa/f12/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f12/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index 35c0d7cd67..0000000000 --- a/src/vendorcode/amd/agesa/f12/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,420 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 22910 $ @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $ -; -; **************************************************************************** -; * -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -DDR2133 EQU ( 1 SHL (DDR2133_FREQUENCY / 66)) -DDR2400 EQU ( 1 SHL (DDR2400_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed -PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs -PSO_SOLDERED_DOWN_SODIMM_TYPE EQU 15 ; < Soldered down SODIMM type -PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 4 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 6 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 3 - DB SocketID - DB ANY_CHANNEL - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 10 - DB SocketID - DB ChannelID - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 6 - DB SocketID - DB ANY_CHANNEL - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 11 - DB SocketID - DB ChannelID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_RXEN_SEED - DB 20 - DB SocketID - DB ChannelID - DW Byte0Seed - DW Byte1Seed - DW Byte2Seed - DW Byte3Seed - DW Byte4Seed - DW Byte5Seed - DW Byte6Seed - DW Byte7Seed - DW ByteEccSeed -ENDM - -NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ - DB PSO_NO_LRDIMM_CS67_ROUTING - DB 3 - DB SocketID - DB ChannelID - DB 1 -ENDM - -SOLDERED_DOWN_SODIMM_TYPE MACRO SocketID:REQ, ChannelID:REQ - DB PSO_SOLDERED_DOWN_SODIMM_TYPE - DB 3 - DB SocketID - DB ChannelID - DB 1 -ENDM - -LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO - DB PSO_LVDIMM_VOLT1_5_SUPPORT - DB 3 - DB ANY_SOCKET - DB ANY_CHANNEL - DB 1 -ENDM - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** diff --git a/src/vendorcode/amd/agesa/f12/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f12/Legacy/Proc/arch2008.asm deleted file mode 100644 index 1c56b86d76..0000000000 --- a/src/vendorcode/amd/agesa/f12/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2674 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 44324 $ $Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - .mmx - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN UINT32 C1ePlatformData1; -; IN UINT32 C1ePlatformData2; -; IN UINT32 C1ePlatformData3; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN UseAtmMode; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f12/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f12/Legacy/agesa.inc deleted file mode 100644 index 9c287dcc92..0000000000 --- a/src/vendorcode/amd/agesa/f12/Legacy/agesa.inc +++ /dev/null @@ -1,2776 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 49979 $ @e \$Date: 2011-03-31 12:08:42 +0800 (Thu, 31 Mar 2011) $ -; -; **************************************************************************** -; * -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h - - ; AGESA FCH CALLOUTS - AGESA_FCH_OEM_CALLOUT EQU 00028401h - -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - - -;----------------------------------------------------------------------------- -; FCH DEFINITIONS AND MACROS -; -;----------------------------------------------------------------------------- - -; Configuration values for SdConfig - SdDisable EQU 0 ; Disabled - SdAmda EQU 1 ; AMDA, set 24,18,16, default - SdDma EQU 2 ; DMA clear 24, 16, set 18 - SdPio EQU 3 ; PIO clear 24,18,16 -SD_MODE TEXTEQU <DWORD> - -; Configuration values for AzaliaController - AzAuto EQU 0 ; Auto - Detect Azalia controller automatically - AzDisable EQU 1 ; Diable - Disable Azalia controller - AzEnable EQU 2 ; Enable - Enable Azalia controller -HDA_CONFIG TEXTEQU <DWORD> - -; Configuration values for IrConfig - IrDisable EQU 0 ; Disable - IrRxTx0 EQU 1 ; Rx and Tx0 - IrRxTx1 EQU 2 ; Rx and Tx1 - IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1 -IR_CONFIG TEXTEQU <DWORD> - -; Configuration values for SataClass - SataNativeIde EQU 0 ; Native IDE mode - SataRaid EQU 1 ; RAID mode - SataAhci EQU 2 ; AHCI mode - SataLegacyIde EQU 3 ; Legacy IDE mode - SataIde2Ahci EQU 4 ; IDE->AHCI mode - SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver) - SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver) -SATA_CLASS TEXTEQU <DWORD> - -; Configuration values for GppLinkConfig - PortA4 EQU 0 ; 4:0:0:0 - PortA2B2 EQU 2 ; 2:2:0:0 - PortA2B1C1 EQU 3 ; 2:1:1:0 - PortA1B1C1D1 EQU 4 ; 1:1:1:1 -GPP_LINKMODE TEXTEQU <DWORD> - -; Configuration values for FchPowerFail - AlwaysOff EQU 0 ; Always power off after power resumes - AlwaysOn EQU 1 ; Always power on after power resumes - UsePrevious EQU 3 ; Resume to same setting when power fails -POWER_FAIL TEXTEQU <DWORD> - -; -; FCH Component Data Structure in InitReset stage -; -FCH_RESET_INTERFACE STRUCT - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - - GppEnable BOOLEAN ? ; Master switch of GPP function -FCH_RESET_INTERFACE ENDS - - -; -; FCH Component Data Structure from InitEnv stage -; -FCH_INTERFACE STRUCT - SdConfig SD_MODE ? ; Secure Digital (SD) controller mode - AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller - IrConfig IR_CONFIG ? ; Infrared (IR) Configuration - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - SataClass SATA_CLASS ? ; SATA controller mode - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller - ; FALSE - Legacy IDE mode - ; TRUE - Native IDE mode - Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function - ; FALSE - OHCI1 is disabled - ; TRUE - OHCI1 is enabled - Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function - ; FALSE - OHCI2 is disabled - ; TRUE - OHCI2 is enabled - Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function - ; FALSE - OHCI3 is disabled - ; TRUE - OHCI3 is enabled - Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function - ; FALSE - OHCI4 is disabled - ; TRUE - OHCI4 is enabled - XhciSwitch BOOLEAN ? ; XHCI controller Function - ; FALSE - XHCI is disabled - ; TRUE - XHCI is enabled - GppEnable BOOLEAN ? ; Master switch of GPP function - FchPowerFail POWER_FAIL ? ; FCH power failure option -FCH_INTERFACE ENDS - - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the - ; < currently installed processor - C1eModeHardware EQU 2 ; < Hardware method - C1eModeMsgBased EQU 3 ; < Message-based method - C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port - ; 0 - Do not invert (default) - ; 1 - Invert P and N on this lane -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeAutoDetect EQU 11 - MaxConnectorType EQU 12 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - - -;IOMMU requestor ID -IOMMU_REQUESTOR_ID STRUCT - Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number -IOMMU_REQUESTOR_ID ENDS - -;IVMD exclusion range descriptor -IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT - Flags UINT32 ? ; Descriptor flags - ; @li @b Flags[31] - Terminate descriptor array. - ; @li @b Flags[30] - Ignore descriptor. - ; @li @b Flags[0] - Range applies for all requestor IDs. - RequestorId IOMMU_REQUESTOR_ID {} ; Requestor ID - RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range - RangeLength UINT64 ? ; Length of exclusion range in bytes -IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - IommuSupport BOOLEAN ? ; IOMMU support. - ; TRUE = Disable and hide IOMMU device. - ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table. - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported. - LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings. - Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode. - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % -GNB_ENV_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - DDR2100_FREQUENCY EQU 1050 ; < DDR 2100 - DDR2133_FREQUENCY EQU 1066 ; < DDR 2133 - DDR2400_FREQUENCY EQU 1200 ; < DDR 2400 - UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_AUTO EQU 2 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT_INITIAL EQU 0 ; < Initial value for VDDIO - VOLT1_5 EQU 1 ; < 1.5 Volt - VOLT1_35 EQU 2 ; < 1.35 Volt - VOLT1_25 EQU 3 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0xFF ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_4MB_ALIGNED EQU 00FFFFC0h - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 ? ; < Max Read Latency (ns) for the DCT - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT - BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - -; =============================================================================== -; Bitfield for ID -; =============================================================================== -ID_FIELD STRUCT - SocketId UINT16 ? -; OUT UINT16 SocketId:8; ; < Socket ID -; OUT UINT16 ModuleId:8; ; < Module ID -ID_FIELD ENDS - -; =============================================================================== -; Union for ID of socket and module that will be passed out in call out -; =============================================================================== -ID_INFO UNION - IdField ID_FIELD {} ; < Bitfield for ID - IdInformation UINT16 ? ; < ID information for call out -ID_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 0x04012400 ; < DDR3 voltage initial value is not 0 - MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 0x04012500 ; < Cannot find a commonly supported VDDIO - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; Other CPU events (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h -CPU_EVENT_STACK_REENTRY EQU 008020500h -CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table - AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address - CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address - CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range - CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block - CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block - CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block - CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block - CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block - CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block - CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block - CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM - CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address - CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller - CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address - CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller - CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller - CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller - CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode - CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode - CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode - CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode - CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI - CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI - CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge - CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration - CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present - CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present - CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present - CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present - CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable - CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable - CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable - CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable - CfgIommuSupport BOOLEAN ? ; IOMMU support - CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported - CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings - CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Reserved2:3; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; ///< Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; ///< The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; ///< The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; ///< Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; ///< Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; ///< Serial Number. - PartNumber UINT8 (18) DUP (?) ; ///< Part Number. - Attributes UINT8 ? ; ///< Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; ///< Extended Size. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; ///< Socket ID -; OUT UINT8 Channel:2 ; ///< Channel ID -; OUT UINT8 Dimm:2 ; ///< DIMM ID -; OUT UINT8 DimmPresent:1 ; ///< Dimm Present - StartingAddr UINT32 ? ; ///< The physical address, in kilobytes, of a range - ; ///< of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; ///< The handle, or instance number, associated with - ; ///< the Memory Device structure to which this address - ; ///< range is mapped. - ConfigSpeed UINT16 ? ; ///< Configured memory clock speed -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_ONE EQU 5 ; < Level to 1 core - CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores - CoreLevelModeMax EQU 19 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery - FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table - AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f12/Legacy/amd.inc b/src/vendorcode/amd/agesa/f12/Legacy/amd.inc deleted file mode 100644 index 389efba986..0000000000 --- a/src/vendorcode/amd/agesa/f12/Legacy/amd.inc +++ /dev/null @@ -1,461 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ -; -; **************************************************************************** -; * -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_GET_EXECACHE_SIZE EQU 00020010h - AMD_LATE_RUN_AP_TASK EQU 00020011h - AMD_IDENTIFY_DIMMS EQU 00020012h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f12/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f12/Legacy/bridge32.inc deleted file mode 100644 index ca02c3dcc6..0000000000 --- a/src/vendorcode/amd/agesa/f12/Legacy/bridge32.inc +++ /dev/null @@ -1,576 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ -; -; **************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f12/cpcarmac.inc b/src/vendorcode/amd/agesa/f12/cpcarmac.inc deleted file mode 100644 index ecbdd9c2c1..0000000000 --- a/src/vendorcode/amd/agesa/f12/cpcarmac.inc +++ /dev/null @@ -1,452 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: cpcarmac.inc $Revision:: 44324 $ $Date:: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ -; -; Description: Code to setup and break down cache-as-stack -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - - .XLIST - INCLUDE cpcar.inc - .LIST - .586P - .mmx - -;====================================================================== -; AMD_ENABLE_STACK: Setup a stack -; -; In: -; EBX = Return address (preserved) -; -; Out: -; SS:ESP - Our new private stack location -; -; EAX = AGESA_STATUS -; EDX = Return status code if EAX contains a return code of higher -; severity than AGESA_SUCCESS -; ECX = Stack size in bytes -; -; Requirements: -; * This routine presently is limited to a max of 64 processor cores -; Preserved: -; ebx ebp -; Destroyed: -; eax, ecx, edx, edi, esi, ds, es, ss, esp -; mmx0, mmx1 -; -; Description: -; Fixed MTRR address allocation to cores: -; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. -; There is a max of 1 BSP, 7 core0s and 56 other cores. -; Although each core has it's own cache storage, they share the address space. Each core must -; be assigned a private and unique address space for its stack. To support legacy systems, -; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved -; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) -; -; 80000h 40000h 00000h -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; 64K | | | | | | | | | 64K ea -; ea +----------+----------+----------+----------+----------+----------+----------+----------+ -; | MTRR 0000_0250 MTRRfix64K_00000 | -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node -; |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; -; C0000h B0000h A0000h 90000h 80000h -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -;16K | | | | | | | | | | | | | | | | | -; ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node -; | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; -; E0000h D0000h C0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; -; 100000h F0000h E0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -;====================================================================== -AMD_ENABLE_STACK MACRO - local AmdEnableStackExit - -; Note that SS:ESP will be default stack. Note that this stack -; routine will not be used after memory has been initialized. Because -; of its limited lifetime, it will not conflict with typical PCI devices. - movd mm0, ebx ; Put return address in a safe place - movd mm1, ebp ; Save some other user registers - - ; get node id and core id of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - ; Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established - - ; If we detected an unknown processor family or core combination, return AGESA_FATAL. - .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY)) - mov edx, CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .elseif (esi & (1 SHL FLAG_CORE_NOT_IDENTIFIED)) - mov edx, CPU_EVENT_CORE_NOT_IDENTIFIED - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .endif - - ; determine if stack is already enabled. We are using the DefType MSR for this determination. - ; It is =0 after reset; CAR setup sets it to enable the MTRRs - mov eax, cr0 ; Is cache enabled? (CD or NW bit set) - CR0_MASK TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW)) - .if (!(eax & CR0_MASK)) - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) - MSR_MASK TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN)) - .if (eax & MSR_MASK) - bts esi, FLAG_STACK_REENTRY ; indicate stack has already been initialized - .endif - .endif - - ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM - mov ebx, esi ; Get my Node/Core info - xor bl, bl - shl bh, 3 ; Isolate my node#, match alignment for PCI Dev# - mov eax, 8000C144h ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit - add ah, bh - mov ebx, eax ; Save PCI address for Base/Limit pair - - mov dx, 0CF8h - out dx, eax - add dx, 4 - xor eax, eax ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) - out dx, eax ; DRAM Limit = node0, no interleave - - mov eax, ebx - sub eax, 4 ; Now point to the Base register - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 00000003h ; Set the read and write enable bits - out dx, eax ; DRAM Base = 0x0000, R/W - - AMD_ENABLE_STACK_FAMILY_HOOK - - ; Init CPU MSRs for our init routines - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Turn on modification enable bit - _WRMSR - - mov eax, esi - bt eax, FLAG_STACK_REENTRY ; Is this a 2nd entry? - .if (!carry?) ; On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP - bt eax, FLAG_IS_PRIMARY ; Is this core the primary in a compute unit? - .if (carry?) ; Families using shared groups do not need to clear the MTRRs since that is done at power-on reset - ; Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores - ; Clear all variable and Fixed MTRRs for non-shared cores - mov ecx, AMD_MTRR_VARIABLE_BASE0 - xor eax, eax - xor edx, edx - .while (cl != 10h) ; Variable MTRRphysBase[n] and MTRRphysMask[n] - _WRMSR - inc cl - .endw - mov cx, AMD_MTRR_FIX64k_00000 ; MSR:0000_0250 - _WRMSR - mov cx, AMD_MTRR_FIX16k_80000 ; MSR:0000_0258 - _WRMSR - mov cx, AMD_MTRR_FIX16k_A0000 ; MSR:0000_0259 - _WRMSR - mov cx, AMD_MTRR_FIX4k_C0000 ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 - .while (cl != 70h) - _WRMSR - inc cl - .endw - - ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. - ; - not strictly needed since the FixedMTRRs take presedence. - mov eax, (16 * 1024 * 1024) - mov ecx, TOP_MEM ; MSR:C001_001A - _WRMSR - .endif ; End Is_Primary - .endif ; End Stack_ReEntry - - ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores - xor eax, eax - xor edx, edx - mov ecx, IORR_BASE ; MSR:C001_0016 - 0019 - .while (cl != 1Ah) - _WRMSR - inc cl - .endw - mov ecx, TOP_MEM2 ; MSR:C001_001D - _WRMSR - - ; setup MTRRs for stacks - ; A speculative read can be generated by a speculative fetch mis-aligned in a code zone - ; or due to a data zone being interpreted as code. When a speculative read occurs outside a - ; controlled region (intentionally used by software), it could cause an unwanted cache eviction. - ; To prevent speculative reads from causing an eviction, the unused cache ranges are set - ; to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. - ; Note: some core stack regions will share an MTRR since the control granularity is much - ; larger than the allocated stack zone. The allocation algorithm must account for this 'extra' - ; space covered by the MTRR when parseling out cache space for the various uses. In some cases - ; this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c - ; - ; Outcome of this block is that: (Note the MTRR map at the top of the file) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) - ; - - mov ax, si ; Load node, core - .if (al == 0) ; Is a core 0? - .if (ah == 0) ; Is Node 0? (BSP) - ; Is BSP, assign a 64K stack - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE / 1000h)) - mov ebp, BSP_STACK_BASE_ADDR - .else ; node 1 to 7, core0 - ; Is a Core0 of secondary node, assign 16K stacks - mov bx, AMD_MTRR_FIX16k_80000 - shl ebx, 16 ; - mov bh, ah ; Node# is used as slot# - mov bl, (CORE0_STACK_SIZE / 1000h) - mov al, ah ; Base = (Node# * Size); - mul bl ; - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE0_STACK_BASE_ADDR - mov ebp, eax - .endif - .else ;core 1 thru core 7 - ; Is core 1-7 of any node, assign 4K stacks - mov al, 8 ; CoreIndex = ( (Node# * 8) ... - mul ah ; - mov bx, si ; - add al, bl ; ... + Core#); - - mov bx, AMD_MTRR_FIX64k_00000 - shl ebx, 16 ; - mov bh, al ; Slot# = (CoreIndex / 16) + 4; - shr bh, 4 ; - add bh, 4 ; - mov bl, (CORE1_STACK_SIZE / 1000h) - - mul bl ; Base = ( (CoreIndex * Size) ... - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE1_STACK_BASE_ADDR ; ... + Base_Addr); - mov ebp, eax - .endif - - ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR) - mov edi, WB_DRAM_TYPE ; Load Cache type in 1st slot - mov cl, bh ; ShiftCount = ((slot# ... - and cl, 03h ; ... % 4) ... - shl cl, 3 ; ... * 8); - shl edi, cl ; Cache type is now in correct position - ror ebx, 16 ; Get the MTRR address - movzx ecx, bx ; - rol ebx, 16 ; Put slot# & size back in BX - _RDMSR ; Read-modify-write the MSR - .if (bh < 4) ; Is value in lower or upper half of MSR? - or eax, edi ; - .else ; - or edx, edi ; - .endif ; - _WRMSR ; - - ; Enable MTRR defaults as UC type - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Read-modify-write the MSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Close the modification window on the Fixed MTRRs - mov ecx, MTRR_SYS_CFG ; MSR:0C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_EN ; MtrrFixDramEn - bts eax, MTRR_VAR_DRAM_EN ; variable MTRR enable bit - btr eax, MTRR_FIX_DRAM_MOD_EN ; Turn off modification enable bit - _WRMSR - - ; Enable caching in CR0 - mov eax, CR0 ; Enable WT/WB cache - btr eax, CR0_PG ; Make sure paging is disabled - btr eax, CR0_CD ; Clear CR0 NW and CD - btr eax, CR0_NW - mov CR0, eax - - ; Use the Stack Base & size to calculate SS and ESP values - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; - mov esp, ebp ; Initialize the stack pointer - mov edi, esp ; Copy the stack start to edi - movzx bx, bl - movzx ebx, bx ; Clear upper ebx, don't need MSR addr anymore - shl ebx, 12 ; Make size full byte count (* 4K) - add esp, ebx ; Set the Stack Pointer as full linear address - sub esp, 4 - ; - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - 32b start address of stack block - ; ebx - size of stack block - ; esp - 32b linear stack pointer - ; - - ; Determine mode for SS base; - mov ecx, CR0 ; Check for 32-bit protect mode - bt ecx, CR0_PE ; - .if (!carry?) ; PE=0 means real mode - mov cx, cs ; - .if (cx >= 0D000h) ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000 - ; alter SS:ESP for 16b Real Mode: - mov eax, edi ; - shr eax, 4 ; Create a Real Mode segment for ss, ds, es - mov ss, ax ; - mov ds, ax ; - mov es, ax ; - shl eax, 4 ; - sub edi, eax ; Adjust the clearing pointer for Seg:Offset mode - mov esp, ebx ; Make SP an offset from SS - sub esp, 4 ; - .endif ; endif - ; else - ; Default is to use Protected 32b Mode - .endif - ; - ; Clear The Stack - ; Now that we have set the location and the MTRRs, initialize the cache by - ; reading then writing to zero all of the stack area. - ; review: - ; ss - Stack base - ; esp - stack pointer - ; ebx - size of stack block - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - address of start of stack block - ; - shr ebx, 2 ; - mov cx, bx ; set cx for size count of DWORDS - ; Check our flags - Don't clear an existing stack - .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) ) - cld - mov esi, edi - rep lods DWORD PTR [esi] ; Pre-load the range - xor eax, eax - mov cx, bx - mov esi, edi ; Preserve base for push on stack - rep stos DWORD PTR [edi] ; Clear the range - mov DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword - shl ebx, 2 ; Put stack size and base - push ebx ; in top of stack - push esi - - mov ecx, ebx ; Return size of stack in bytes - mov eax, AGESA_SUCCESS ; eax = AGESA_SUCCESS : no error return code - .else - movzx ecx, cx - shl ecx, 2 ; Return size of stack, in bytes - mov edx, CPU_EVENT_STACK_REENTRY - mov eax, AGESA_WARNING ; eax = AGESA_WARNING (Stack has already been set up) - .endif - -AmdEnableStackExit: - movd ebx, mm0 ; Restore return address - movd ebp, mm1 -ENDM - -;====================================================================== -; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -; should only be executed on the BSP -; -; In: -; none -; -; Out: -; EAX = AGESA_SUCCESS -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, esp -;====================================================================== -AMD_DISABLE_STACK MACRO - - mov esp, ebx ; Save return address - - ; get node/core/flags of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - - ; Turn on modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable modifications - _WRMSR - - ; Set lower 640K MTRRs for Write-Back memory caching - mov ecx, AMD_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR ; 0 - 512K = WB Mem - mov ecx, AMD_MTRR_FIX16k_80000 - _WRMSR ; 512K - 640K = WB Mem - - ; Turn off modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable modification - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable 'normal' cache operations - - mov ebx, esp ; restore return address (ebx) - xor eax, eax - -ENDM diff --git a/src/vendorcode/amd/agesa/f14/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f14/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index 86643230ea..0000000000 --- a/src/vendorcode/amd/agesa/f14/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,402 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 22910 $ @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $ -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed -PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 4 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 6 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 10 - DB SocketID - DB ChannelID - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 3 - DB SocketID - DB ChannelID - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 3 - DB SocketID - DB ANY_CHANNEL - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 10 - DB SocketID - DB ChannelID - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 6 - DB SocketID - DB ANY_CHANNEL - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 11 - DB SocketID - DB ChannelID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_RXEN_SEED - DB 20 - DB SocketID - DB ChannelID - DW Byte0Seed - DW Byte1Seed - DW Byte2Seed - DW Byte3Seed - DW Byte4Seed - DW Byte5Seed - DW Byte6Seed - DW Byte7Seed - DW ByteEccSeed -ENDM - -NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ - DB PSO_NO_LRDIMM_CS67_ROUTING - DB 3 - DB SocketID - DB ChannelID - DB 1 -ENDM - - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** diff --git a/src/vendorcode/amd/agesa/f14/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f14/Legacy/Proc/arch2008.asm deleted file mode 100644 index d30790621c..0000000000 --- a/src/vendorcode/amd/agesa/f14/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2674 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 37157 $ $Date: 2010-09-01 03:24:07 +0800 (Wed, 01 Sep 2010) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - .mmx - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN UINT32 C1ePlatformData1; -; IN UINT32 C1ePlatformData2; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN UseAtmMode; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f14/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f14/Legacy/agesa.inc deleted file mode 100644 index 84f9ec7bf1..0000000000 --- a/src/vendorcode/amd/agesa/f14/Legacy/agesa.inc +++ /dev/null @@ -1,2570 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 47417 $ @e \$Date: 2011-02-18 12:48:20 -0700 (Fri, 18 Feb 2011) $ -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeHardware EQU 1 ; < Hardware method - C1eModeMsgBased EQU 2 ; < Message-based method - C1eModeSoftwareDeprecated EQU 3 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 4 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 5 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeAutoDetect EQU 11 - MaxConnectorType EQU 12 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; LVDS Misc Control Field -LVDS_MISC_CONTROL_FIELD STRUCT - FpdiMode UINT8 ? - ;IN UINT8 FpdiMode:1; - ;IN UINT8 DlChSwap:1; - ;IN UINT8 VsyncActiveLow:1; - ;IN UINT8 HsyncActiveLow:1; - ;IN UINT8 BLONActiveLow:1; - ;IN UINT8 Reserved:3; -LVDS_MISC_CONTROL_FIELD ENDS - -; LVDS Misc Control -LVDS_MISC_CONTROL UNION - Field LVDS_MISC_CONTROL_FIELD {} - Value UINT8 ? -LVDS_MISC_CONTROL ENDS - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % -GNB_ENV_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - UNSUPPORTED_DDR_FREQUENCY EQU 934 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_AUTO EQU 2 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT1_5 EQU 0 ; < 1.5 Volt - VOLT1_35 EQU 1 ; < 1.35 Volt - VOLT1_25 EQU 2 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0xFF ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 ? ; < Max Read Latency (ns) for the DCT - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - ; < 0 = 1.5v - ; < 1 = 1.35v - ; < 2 = 1.2v - ; < 0xFF = Mixed 1.5V and 1.2V in the system. 1.5V dimms get excluded - ; < from the system. - ; < - - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - - - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; BIST (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Reserved2:3; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; ///< Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; ///< The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; ///< The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; ///< Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; ///< Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; ///< Serial Number. - PartNumber UINT8 (18) DUP (?) ; ///< Part Number. - Attributes UINT8 ? ; ///< Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; ///< Extended Size. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; ///< Socket ID -; OUT UINT8 Channel:2 ; ///< Channel ID -; OUT UINT8 Dimm:2 ; ///< DIMM ID -; OUT UINT8 DimmPresent:1 ; ///< Dimm Present - StartingAddr UINT32 ? ; ///< The physical address, in kilobytes, of a range - ; ///< of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; ///< The handle, or instance number, associated with - ; ///< the Memory Device structure to which this address - ; ///< range is mapped. - ConfigSpeed UINT16 ? ; ///< Configured memory clock speed -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_ONE EQU 5 ; < Level to 1 core - CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores - CoreLevelModeMax EQU 19 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < platform operational characteristics. -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f14/Legacy/amd.inc b/src/vendorcode/amd/agesa/f14/Legacy/amd.inc deleted file mode 100644 index b7162024e4..0000000000 --- a/src/vendorcode/amd/agesa/f14/Legacy/amd.inc +++ /dev/null @@ -1,461 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 33891 $ @e \$Date: 2010-06-26 00:22:54 +0800 (Sat, 26 Jun 2010) $ -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_GET_EXECACHE_SIZE EQU 00020010h - AMD_LATE_RUN_AP_TASK EQU 00020011h - AMD_IDENTIFY_DIMMS EQU 00020012h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f14/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f14/Legacy/bridge32.inc deleted file mode 100644 index 8685c6c077..0000000000 --- a/src/vendorcode/amd/agesa/f14/Legacy/bridge32.inc +++ /dev/null @@ -1,577 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 23714 $ @e \$Date: 2009-12-10 07:28:37 +0800 (Thu, 10 Dec 2009) $ -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f14/Lib/IA32/amdlib32.asm b/src/vendorcode/amd/agesa/f14/Lib/IA32/amdlib32.asm deleted file mode 100644 index ff0f85b0ba..0000000000 --- a/src/vendorcode/amd/agesa/f14/Lib/IA32/amdlib32.asm +++ /dev/null @@ -1,151 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.xmm -.model flat,C -ASSUME FS:NOTHING -.code - -;--------------------------------------------------------------------------- -; -; _mm_clflush_fs - execute clflush instruction for address fs:address32 -; this lets clflush operate beyond 4GB in 32-bit mode -; -; void _mm_clflush_fs (void *address32); -; - -_mm_clflush_fs proc public - - - - - - - mov eax, [esp+8] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - clflush fs:[eax] - - - - ret -_mm_clflush_fs ENDP - - -;--------------------------------------------------------------------------- -; -; _mm_stream_si128_fs - execute movntdq instruction for address fs:address32 -; this lets movntdq operate beyond 4GB in 32-bit mode -; -; void _mm_stream_si128_fs (void *dest, void *data) -; -_mm_stream_si128_fs proc public - push esi - mov esi, [esp+12] - movdqa xmm0, [esi] - mov esi, [esp+8] - movntdq fs:[esi], xmm0 - - - - - - - - pop esi - ret - - - - -_mm_stream_si128_fs ENDP - - - - -;--------------------------------------------------------------------------- - - -END diff --git a/src/vendorcode/amd/agesa/f14/Lib/IA32/ms_shift.asm b/src/vendorcode/amd/agesa/f14/Lib/IA32/ms_shift.asm deleted file mode 100644 index 3eb51134d5..0000000000 --- a/src/vendorcode/amd/agesa/f14/Lib/IA32/ms_shift.asm +++ /dev/null @@ -1,110 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the right. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_aullshr PROC NEAR C PUBLIC - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov eax, edx - xor edx, edx - .endif - shrd eax, edx, cl - shr edx, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_aullshr ENDP - -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the left. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_allshl PROC NEAR C PUBLIC USES CX - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov edx, eax - xor eax, eax - .endif - shld edx, eax, cl - shl eax, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_allshl ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Lib/IA32/msmemcpy.asm b/src/vendorcode/amd/agesa/f14/Lib/IA32/msmemcpy.asm deleted file mode 100644 index b74818c3d0..0000000000 --- a/src/vendorcode/amd/agesa/f14/Lib/IA32/msmemcpy.asm +++ /dev/null @@ -1,84 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -; void *memcpy( void *dest, void *src, size_t count ); -; -; Copy count bytes from src to dest, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memcpy -memcpy PROC NEAR C PUBLIC USES ECX EDI ESI dest:DWORD, src:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov esi, src - mov ecx, count - rep movsb - mov eax, dest - popf - ret -memcpy ENDP - -; void *memset( void *dest, int c, size_t count ); -; -; At dest, set count bytes to byte value, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memset -memset PROC NEAR C PUBLIC USES ECX EDI dest:DWORD, value:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov eax, value - mov ecx, count - rep stosb - mov eax, edi - popf - ret -memset ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Lib/x64/amdlib64.asm b/src/vendorcode/amd/agesa/f14/Lib/x64/amdlib64.asm deleted file mode 100644 index abc1179903..0000000000 --- a/src/vendorcode/amd/agesa/f14/Lib/x64/amdlib64.asm +++ /dev/null @@ -1,591 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 64bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.code -;/*++ - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] CX IO port address -; * @param[in] DL IO port Value -; */ - -PUBLIC WriteIo8 -WriteIo8 PROC - mov al, dl - mov dx, cx - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] CX IO port address -; * @param[in] DX IO port Value -; */ -PUBLIC WriteIo16 -WriteIo16 PROC - mov ax, dx - mov dx, cx - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] CX IO port address -; * @param[in] EDX IO port Value -; */ - -PUBLIC WriteIo32 -WriteIo32 PROC - mov eax, edx - mov dx, cx - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] CX IO port address -; * @retval AL IO port Value -; */ -PUBLIC ReadIo8 -ReadIo8 PROC - mov dx, cx - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] CX IO port address -; * @retval AX IO port Value -; */ -PUBLIC ReadIo16 -ReadIo16 PROC - mov dx, cx - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] CX IO port address -; * @retval EAX IO port Value -; */ -PUBLIC ReadIo32 -ReadIo32 PROC - mov dx, cx - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrRead -LibAmdMsrRead PROC - push rsi - mov rsi, rdx - rdmsr - mov [rsi], eax - mov [rsi+4], edx - pop rsi - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrWrite -LibAmdMsrWrite PROC - push rsi - mov rsi, rdx - mov eax, [rsi] - and rax, 0ffffffffh - mov edx, [rsi+4] - and rdx, 0ffffffffh - wrmsr - pop rsi - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] RCX CPUID function -; * @param[in] RDX Pointer to CPUID_DATA to save cpuid data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdCpuidRead -LibAmdCpuidRead PROC - - push rbx - push rsi - mov rsi, rdx - mov rax, rcx - cpuid - mov [rsi], eax - mov [rsi+4], ebx - mov [rsi+8], ecx - mov [rsi+12],edx - pop rsi - pop rbx - ret - -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * @retval RAX Time stamp counter value -; */ - -PUBLIC ReadTSC -ReadTSC PROC - rdtsc - and rax, 0ffffffffh - shl rdx, 32 - or rax, rdx - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] RCX - Memory Address -; * @retval Memory byte at given address -; */ -PUBLIC Read64Mem8 -Read64Mem8 PROC - - xor rax, rax - mov al, [rcx] - ret - -Read64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] RCX - Memory Address -; * @retval Memory word at given address -; */ -PUBLIC Read64Mem16 -Read64Mem16 PROC - - xor rax, rax - mov ax, [rcx] - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] RCX - Memory Address -; * @retval Memory dword at given address -; */ -PUBLIC Read64Mem32 -Read64Mem32 PROC - - xor rax, rax - mov eax, [rcx] - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] RCX Memory Address -; * @param[in] DL Value to write -; */ - -PUBLIC Write64Mem8 -Write64Mem8 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], al - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] RCX Memory Address -; * @param[in] DX Value to write -; */ -PUBLIC Write64Mem16 -Write64Mem16 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], ax - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] RCX Memory Address -; * @param[in] EDX Value to write -; */ -PUBLIC Write64Mem32 -Write64Mem32 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], eax - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Pointer to value -; */ - -PUBLIC LibAmdReadCpuReg -LibAmdReadCpuReg PROC - - push rax - xor rax, rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - jmp RegRead -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - jmp RegRead -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - jmp RegRead -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - jmp RegRead -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - jmp RegRead -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - jmp RegRead -Reg17h: - cmp cl, 17h - jne RegRead - mov rax, dr7 -RegRead: - mov [rdx], eax - pop rax - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Value to write -; */ - -PUBLIC LibAmdWriteCpuReg -LibAmdWriteCpuReg PROC - - push rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - mov eax, edx - mov cr0, rax - jmp Done -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - mov eax, edx - mov cr4, rax - jmp Done -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - mov eax, edx - mov dr0, rax - jmp Done -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - mov eax, edx - mov dr1, rax - jmp Done -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - mov eax, edx - mov dr2, rax - jmp Done -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - mov eax, edx - mov dr3, rax - jmp Done -Reg17h: - cmp cl, 17h - jne Done - mov rax, dr7 - mov eax, edx - mov dr7, rax -Done: - pop rax - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC - pushfq - mov rax, 0BACCD00Bh ; Backdoor in SimNow - mov rbx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popfq - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] ECX IO Port Address -; * @param[in] EDX Value to write -; * @param[in] R8D IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC - push rbx - push rax - - mov ebx, r8d - mov eax, edx - mov edx, ecx - out dx, eax - - pop rax - pop rbx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC - - push rbx - - mov rcx, 0C001100Ah ;bit 0 = HDT redirect - mov rdi, 09C5A203Ah ;Password - rdmsr - and rax, 0ffffffffh - or rax, 1 - - wrmsr - - mov rax, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - pop rbx - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC - bsf eax, ecx - jnz nonZeroSource - mov al,32 -nonZeroSource: - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC - bsr eax, ecx - jnz nonZeroSource - mov al,0FFh -nonZeroSource: - ret -LibAmdBitScanReverse ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Flush specified number of cache line -; * -; * @param[in] RCX Physical address to be flushed -; * @param[in] DL number of cachelines to be flushed -; */ -PUBLIC LibAmdCLFlush -LibAmdCLFlush PROC - push rax - mov rax, rcx - movzx rcx, dl - @@: - mfence - clflush [rax] - mfence - add rax,64 - loop @B - pop rax - ret -LibAmdCLFlush ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD32.asm b/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD32.asm deleted file mode 100644 index 4112659226..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD32.asm +++ /dev/null @@ -1,113 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 23714 $ @e \$Date: 2009-12-10 07:28:37 +0800 (Thu, 10 Dec 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; PciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -F10RevDProbeFilterCritical PROC NEAR C PUBLIC USES EAX ECX EDX, PciAddress:DWORD, PciRegister:DWORD - - mov ecx, 0C001001Fh - rdmsr - push eax - push ecx - push edx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, PciRegister - mov edx, PciAddress - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dx, 0CF8h ; Set Reg Config Space - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax ; move data to return position - db 0Fh, 0AEh, 0F0h ; MFENCE - - pop edx - pop ecx - pop eax - wrmsr - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD64.asm b/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD64.asm deleted file mode 100644 index 4353190451..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/RevD/F10RevD64.asm +++ /dev/null @@ -1,127 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 23714 $ @e \$Date: 2009-12-10 07:28:37 +0800 (Thu, 10 Dec 2009) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; PciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC F10RevDProbeFilterCritical -F10RevDProbeFilterCritical PROC - - push rax - push rcx - push rdx - push rsi - push rdi - - mov esi, ecx - mov edi, edx - - mov ecx, 0C001001Fh - rdmsr - push rax - push rcx - push rdx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, edi - mov edx, esi - - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - mfence - - mov dx, 0CF8h ; Set Reg Config Space - mfence - - out dx, eax - mfence - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - mfence - - out dx, eax ; move data to return position - mfence - - pop rdx - pop rcx - pop rax - wrmsr - - pop rdi - pop rsi - pop rdx - pop rcx - pop rax - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt.asm deleted file mode 100644 index de5201d1b1..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt.asm +++ /dev/null @@ -1,345 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; * @e \$Revision: 35270 $ @e \$Date: 2010-07-20 00:02:41 +0800 (Tue, 20 Jul 2010) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE cpcarmac.inc - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y A B S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE -;====================================================================== -; ExecuteFinalHltInstruction: Disables the stack and performs -; a hlt instruction on an AP. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteFinalHltInstruction -ExecuteFinalHltInstruction PROC NEAR C USES ESI EDI HaltFlags:DWORD, ApMtrrSettingList:PTR, StandardHeader:PTR - - mov esi, StandardHeader ; The code must reference all parameters to avoid a build warning - mov esi, HaltFlags - mov edi, ApMtrrSettingList - ; Do these special steps in case if the core is part of a compute unit - ; Note: The following bits are family specific flags, that gets set during build time, - ; and indicates things like "family cache control methodology", etc. - ; esi bit0 = 0 -> not a Primary core - ; esi bit0 = 1 -> Primary core - ; esi bit1 = 0 -> Cache disable - ; esi bit1 = 1 -> Cache enable - .if (esi & 2h) - ; Set CombineCr0Cd bit - mov ecx, CU_CFG3 - _RDMSR - bts edx, (COMBINE_CR0_CD - 32) - _WRMSR - ; Clear the CR0.CD bit - mov eax, CR0 ; Make sure cache is enabled for all APs - btr eax, CR0_CD - btr eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .else - mov eax, CR0 ; Make sure cache is disabled for all APs - bts eax, CR0_CD ; Disable cache - bts eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .endif - - .if (esi & 1h) - ; This core is a primary core and needs to do all the MTRRs, including shared MTRRs. - mov esi, edi ; Get ApMtrrSettingList - - ; Configure the MTRRs on the AP so - ; when it runs remote code it will execute - ; out of RAM instead of ROM. - - ; Disable MTRRs and turn on modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - btr eax, MTRR_VAR_DRAM_EN ; Disable - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable - btr eax, MTRR_FIX_DRAM_EN ; Disable - bts eax, SYS_UC_LOCK_EN - _WRMSR - - ; Setup default values for Fixed-Sized MTRRs - ; Set 7FFFh-00000h as WB - mov ecx, AMD_AP_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR - - ; Set 9FFFFh-80000h also as WB - mov ecx, AMD_AP_MTRR_FIX16k_80000 - _WRMSR - - ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO - mov ecx, AMD_AP_MTRR_FIX16k_A0000 - xor eax, eax - xor edx, edx - _WRMSR - - ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO - xor eax, eax - xor edx, edx - mov ecx, AMD_AP_MTRR_FIX4k_C0000 - -CDLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_D8000 - jbe CDLoop - - ; Set FFFFFh-E0000h as Uncacheable Memory - mov eax, 18181818h - mov edx, eax - - mov ecx, AMD_AP_MTRR_FIX4k_E0000 - -EFLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_F8000 - jbe EFLoop - - ; If IBV provided settings for Fixed-Sized MTRRs, - ; overwrite the default settings. - .if ((esi != 0) && (esi != 0FFFFFFFFh)) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - ; While we are not at the end of the list - .while (ecx != CPU_LIST_TERMINAL) - ; Ensure that the MSR address is valid for Fixed-Sized MTRRs - .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \ - (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000)) - mov eax, dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData - mov edx, dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData - _WRMSR - .endif - add esi, sizeof (AP_MTRR_SETTINGS) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - .endw - .endif - - ; restore variable MTRR6 and MTRR7 to default states - mov ecx, AMD_MTRR_VARIABLE_BASE6 ; clear MTRRPhysBase6 MTRRPhysMask6 - xor eax, eax ; and MTRRPhysBase7 MTRRPhysMask7 - xor edx, edx - .while (cl < 010h) - _WRMSR - inc cl - .endw - - ; Enable fixed-range and variable-range MTRRs - mov ecx, AMD_MTRR_DEFTYPE - _RDMSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Enable Top-of-Memory setting - ; Enable use of RdMem/WrMem bits attributes - mov ecx, MTRR_SYS_CFG - _RDMSR - bts eax, MTRR_VAR_DRAM_EN ; Enable - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable - bts eax, MTRR_FIX_DRAM_EN ; Enable - _WRMSR - - mov esi, (1 SHL FLAG_IS_PRIMARY) - .else ; end if primary core - xor esi, esi - .endif - ; Make sure not to touch any Shared MSR from this point on - - AMD_DISABLE_STACK_FAMILY_HOOK - - xor eax, eax - -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction - ret -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteHltInstruction -ExecuteHltInstruction PROC NEAR C - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC NmiHandler -NmiHandler PROC NEAR C - iretd -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC GetCsSelector -GetCsSelector PROC NEAR C, CsSelector:PTR - push ax - push ebx - - call FarCallGetCs - mov ebx, CsSelector - mov [ebx], ax - pop ebx - pop ax - ret -GetCsSelector ENDP - -;====================================================================== -; FarCallGetCs: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -; WARNING: This routine has a mirror routine in the PREMEM segment. -; These two routines MUST be sync'd for content. -;====================================================================== -FarCallGetCs PROC FAR PRIVATE - - mov ax, ss:[esp + 4] - retf - -FarCallGetCs ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -; WARNING: This routine has a mirror routine in the PREMEM segment. -; These two routines MUST be sync'd for content. -;====================================================================== -PUBLIC SetIdtr -SetIdtr PROC NEAR C USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - lidt fword ptr ss:[ebx] - ret -SetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC ExecuteWbinvdInstruction -ExecuteWbinvdInstruction PROC NEAR C - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt64.asm b/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt64.asm deleted file mode 100644 index f1411fa21b..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/CPU/cahalt64.asm +++ /dev/null @@ -1,157 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; * @e \$Revision: 10071 $ @e \$Date: 2008-12-16 18:03:04 -0600 (Tue, 16 Dec 2008) $ -; */ -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - text SEGMENT - - -;====================================================================== -; ExecuteFinalHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteFinalHltInstruction PROC PUBLIC -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteHltInstruction PROC PUBLIC - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -NmiHandler PROC PUBLIC - iretq -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -GetCsSelector PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -GetCsSelector ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -; WARNING: This routine has a mirror routine in the PREMEM segment. -; These two routines MUST be sync'd for content. -;====================================================================== -SetIdtr PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -SetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -ExecuteWbinvdInstruction PROC PUBLIC - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f14/Proc/Mem/Main/mu.asm deleted file mode 100644 index 63c85b94aa..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/Mem/Main/mu.asm +++ /dev/null @@ -1,497 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 274#$ $Date: 2010-03-04 06:16:56 +0800 (Thu, 04 Mar 2010) $ -; Description: Main memory controller system configuration for AGESA -; -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;memUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written -; -; Out: -; -; All registers preserved. -;=============================================================================== -MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemUOutPort ENDP - - -;---------------------------------------------------------------------------- -; _SFENCE(); -; -_SFENCE macro - db 0Fh,0AEh,0F8h - endm - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemUWriteCachelines: -; Write a test pattern to DRAM -; -; In: Pattern - pointer to the write pattern -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - xor ecx, ecx - mov cx,ClCount - shl ecx,2 - @@: - db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemUWriteCachelines ENDP - -;=============================================================================== -;MemUReadCachelines: -; -; Read a pattern of 72 bit times (per DQ), to test dram functionality. The -;pattern is a stress pattern which exercises both ISI and crosstalk. The number -;of cache lines to fill is dependent on DCT width mode and burstlength. -; -; In: Buffer - pointer to a buffer where read data will be stored -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL Count:BYTE - pushad - ; First, issue continuous dummy reads to fill up the cache - mov eax,Address - .if (ClCount > 18) - mov cx,ClCount - shr cx,4 - mov Count,cl - .while (Count != 0) - push eax - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - pop eax - add eax,(16*64) ;Next 16CL - dec Count - .endw - .else - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - .if(ClCount == 1) - _MFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - .elseif(ClCount == 3) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - .elseif(ClCount == 6) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - .elseif(ClCount == 9) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - .elseif(ClCount == 18) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - mov eax,fs:[edx] ;TestAddr+16 cache lines - _MFENCE - mov eax,fs:[edx+64] ;TestAddr+17 cache lines - _MFENCE - .endif - .endif - _MFENCE - - ; Then, copy data to buffer - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - xor ecx, ecx - mov cx,ClCount - shl ecx,6 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemUReadCachelines ENDP - -;=============================================================================== -;MemUDummyCLRead: -; -; Perform a single cache line read from a given physical address. -; -; In: Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD - _SFENCE - pushad - mov eax,Address - mov dl,fs:[eax] - popad - ret -MemUDummyCLRead ENDP - -;=============================================================================== -;MemUFlushPattern: -; -; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used -;to ensure cache miss on the next read training. -; -; In: Address - Physical address to be flushed -; ClCount - number of cachelines to be flushed -; Out: -; -;All registers preserved. -;=============================================================================== -MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD - pushad - mov edi,Address - movzx ecx,ClCount - @@: - _MFENCE ; Force strong ordering of clflush - db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi] - _MFENCE - add edi,64 - loop @B - popad - ret -MemUFlushPattern ENDP - - -;=============================================================================== -;MemUGetWrLvNblErr: -; Read ClCount number of cachelines then return the bitmap that indicates -; the write leveling result of each byte lane. -; -; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result -; Address - Physical address to be sampled -; ClCount - number of cachelines to be read -; -; OUT: ErrBitmap - WL result -; -;All registers preserved -;=============================================================================== -MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL ZeroCount[32]:WORD - - pushad - mov esi,Address - _EXECFENCE - ;Cache fill - movzx ecx,ClCount - @@: - mov eax,fs:[esi] - add esi,64 - loop @B - _MFENCE - - ; Then, count the number of 0's - ;push es - ;push ss - ;pop es - lea edi,ZeroCount - mov cx,SIZEOF ZeroCount - mov al,0 - rep stosb - ;pop es - - mov esi,Address - lea edi,ZeroCount - mov cx,ClCount - shl cx,6 - .while(cx > 0) - mov al,fs:[esi] - test al,00Fh ;check lower nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - test al,0F0h ;check upper nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - inc esi - dec cx - test cx,07h - .if(ZERO?) - sub edi,(16*2) - sub cx,8 - add esi,8 - .endif - .endw - - ; Then, average and compress data to error bits - lea esi,ZeroCount - mov dx,ClCount - shl dx,1 - xor eax,eax - xor ecx,ecx - mov cl,0 - .while(cl<16) - .if(WORD PTR [esi] < dx) - bts eax,ecx - .endif - add esi,2 - inc cl - .endw - xor edx,edx - mov dx,WORD PTR ErrBitmap - mov [edx], ax - - popad - ret -MemUGetWrLvNblErr ENDP - -;=============================================================================== -;AlignPointerTo16Byte: -; Modifies BufferPtr to be 16 byte aligned -; -; In: BufferPtrPtr - Pointer to buffer pointer -; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned -; -;All registers preserved. -;=============================================================================== -AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD - push edx - push eax - mov edx, BufferPtrPtr - mov eax, [edx] - add eax, 16 - and ax, 0FFF0h - mov [edx], eax - pop eax - pop edx - ret -AlignPointerTo16Byte ENDP - -;=============================================================================== -;MemUMFenceInstr: -; Serialize instruction -; -; In: -; Out: -; -;All registers preserved. -;=============================================================================== -MemUMFenceInstr PROC CALLCONV PUBLIC - _MFENCE - ret -MemUMFenceInstr ENDP - - END - diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/mru.asm b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/mru.asm deleted file mode 100644 index 56db233be6..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/mru.asm +++ /dev/null @@ -1,187 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 237#$ $Date: 2009-12-10 07:28:37 +0800 (Thu, 10 Dec 2009) $ -; Description: Main memory controller system configuration for AGESA DDR 2 -; -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;MemRecUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written to port -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemRecUOutPort ENDP - - - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemRecUWrite1CL: -; -; Write data from buffer to a system address -; -; In: Address - System address to read from -; Pattern - pointer pattern. -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUWrite1CL PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - mov ecx,4 - @@: - db 66h,0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h,66h,0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemRecUWrite1CL ENDP - -;=============================================================================== -;MemRecURead1CL: -; -; Read one cacheline to buffer -; -; In: Buffer - pointer buffer. -; : Address - System address to read from -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecURead1CL PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD - - pushad - - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - mov ecx,64 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemRecURead1CL ENDP - - -;=============================================================================== -;MemRecUFlushPattern: -; -; Flush one cache line -; -; In: Address - System address [31:0] -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUFlushPattern PROC CALLCONV PUBLIC Address:DWORD - pushad - mov eax,Address - _EXECFENCE - ;clflush fs:[eax] - db 064h ;access relative to FS BASE prefix - db 00Fh ;opcode - db 0AEh ;opcode - db 038h ;eax indirect addressing - _MFENCE - popad - ret -MemRecUFlushPattern ENDP - - - - END - diff --git a/src/vendorcode/amd/agesa/f14/cpcarmac.inc b/src/vendorcode/amd/agesa/f14/cpcarmac.inc deleted file mode 100644 index 54e7f95bb6..0000000000 --- a/src/vendorcode/amd/agesa/f14/cpcarmac.inc +++ /dev/null @@ -1,447 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: cpcarmac.inc $Revision:: 38483 $ $Date:: 2010-09-25 02:13:03 +0800 (Sat, 25 Sep 2010) $ -; -; Description: Code to setup and break down cache-as-stack -; -;***************************************************************************** -; -; Copyright (c) 2011, Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE cpcar.inc - .LIST - .586P - .mmx - -;====================================================================== -; AMD_ENABLE_STACK: Setup a stack -; -; In: -; EBX = Return address (preserved) -; -; Out: -; SS:ESP - Our new private stack location -; -; EAX = AGESA_STATUS -; -; ECX = Stack size in bytes -; -; Requirements: -; * This routine presently is limited to a max of 64 processor cores -; Preserved: -; ebx ebp -; Destroyed: -; eax, ecx, edx, edi, esi, ds, es, ss, esp -; mmx0, mmx1 -; -; Description: -; Fixed MTRR address allocation to cores: -; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. -; There is a max of 1 BSP, 7 core0s and 56 other cores. -; Although each core has it's own cache storage, they share the address space. Each core must -; be assigned a private and unique address space for its stack. To support legacy systems, -; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved -; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) -; -; 80000h 40000h 00000h -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; 64K | | | | | | | | | 64K ea -; ea +----------+----------+----------+----------+----------+----------+----------+----------+ -; | MTRR 0000_0250 MTRRfix64K_00000 | -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node -; |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; -; C0000h B0000h A0000h 90000h 80000h -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -;16K | | | | | | | | | | | | | | | | | -; ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node -; | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; -; E0000h D0000h C0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; -; 100000h F0000h E0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -;====================================================================== -AMD_ENABLE_STACK MACRO - local AmdEnableStackExit - -; Note that SS:ESP will be default stack. Note that this stack -; routine will not be used after memory has been initialized. Because -; of its limited lifetime, it will not conflict with typical PCI devices. - movd mm0, ebx ; Put return address in a safe place - movd mm1, ebp ; Save some other user registers - - ; get node id and core id of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - ; Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established - - ; If we detected an unknown processor family, return AGESA_FATAL. - .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY)) - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .endif - - ; determine if stack is already enabled. We are using the DefType MSR for this determination. - ; It is =0 after reset; CAR setup sets it to enable the MTRRs - mov eax, cr0 ; Is cache enabled? (CD or NW bit set) - CR0_MASK TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW)) - .if (!(eax & CR0_MASK)) - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) - MSR_MASK TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN)) - .if (eax & MSR_MASK) - bts esi, FLAG_STACK_REENTRY ; indicate stack has already been initialized - .endif - .endif - - ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM - mov ebx, esi ; Get my Node/Core info - xor bl, bl - shl bh, 3 ; Isolate my node#, match alignment for PCI Dev# - mov eax, 8000C144h ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit - add ah, bh - mov ebx, eax ; Save PCI address for Base/Limit pair - - mov dx, 0CF8h - out dx, eax - add dx, 4 - xor eax, eax ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) - out dx, eax ; DRAM Limit = node0, no interleave - - mov eax, ebx - sub eax, 4 ; Now point to the Base register - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 00000003h ; Set the read and write enable bits - out dx, eax ; DRAM Base = 0x0000, R/W - - AMD_ENABLE_STACK_FAMILY_HOOK - - ; Init CPU MSRs for our init routines - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Turn on modification enable bit - _WRMSR - - mov eax, esi - bt eax, FLAG_STACK_REENTRY ; Is this a 2nd entry? - .if (!carry?) ; On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP - bt eax, FLAG_IS_PRIMARY ; Is this core the primary in a compute unit? - .if (carry?) ; Families using shared groups do not need to clear the MTRRs since that is done at power-on reset - ; Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores - ; Clear all variable and Fixed MTRRs for non-shared cores - mov ecx, AMD_MTRR_VARIABLE_BASE0 - xor eax, eax - xor edx, edx - .while (cl != 10h) ; Variable MTRRphysBase[n] and MTRRphysMask[n] - _WRMSR - inc cl - .endw - mov cx, AMD_MTRR_FIX64k_00000 ; MSR:0000_0250 - _WRMSR - mov cx, AMD_MTRR_FIX16k_80000 ; MSR:0000_0258 - _WRMSR - mov cx, AMD_MTRR_FIX16k_A0000 ; MSR:0000_0259 - _WRMSR - mov cx, AMD_MTRR_FIX4k_C0000 ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 - .while (cl != 70h) - _WRMSR - inc cl - .endw - - ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. - ; - not strictly needed since the FixedMTRRs take presedence. - mov eax, (16 * 1024 * 1024) - mov ecx, TOP_MEM ; MSR:C001_001A - _WRMSR - .endif ; End Is_Primary - .endif ; End Stack_ReEntry - - ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores - xor eax, eax - xor edx, edx - mov ecx, IORR_BASE ; MSR:C001_0016 - 0019 - .while (cl != 1Ah) - _WRMSR - inc cl - .endw - mov ecx, TOP_MEM2 ; MSR:C001_001D - _WRMSR - - ; setup MTRRs for stacks - ; A speculative read can be generated by a speculative fetch mis-aligned in a code zone - ; or due to a data zone being interpreted as code. When a speculative read occurs outside a - ; controlled region (intentionally used by software), it could cause an unwanted cache eviction. - ; To prevent speculative reads from causing an eviction, the unused cache ranges are set - ; to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. - ; Note: some core stack regions will share an MTRR since the control granularity is much - ; larger than the allocated stack zone. The allocation algorithm must account for this 'extra' - ; space covered by the MTRR when parseling out cache space for the various uses. In some cases - ; this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c - ; - ; Outcome of this block is that: (Note the MTRR map at the top of the file) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) - ; - - mov ax, si ; Load node, core - .if (al == 0) ; Is a core 0? - .if (ah == 0) ; Is Node 0? (BSP) - ; Is BSP, assign a 64K stack - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE / 1000h)) - mov ebp, BSP_STACK_BASE_ADDR - .else ; node 1 to 7, core0 - ; Is a Core0 of secondary node, assign 16K stacks - mov bx, AMD_MTRR_FIX16k_80000 - shl ebx, 16 ; - mov bh, ah ; Node# is used as slot# - mov bl, (CORE0_STACK_SIZE / 1000h) - mov al, ah ; Base = (Node# * Size); - mul bl ; - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE0_STACK_BASE_ADDR - mov ebp, eax - .endif - .else ;core 1 thru core 7 - ; Is core 1-7 of any node, assign 4K stacks - mov al, 8 ; CoreIndex = ( (Node# * 8) ... - mul ah ; - mov bx, si ; - add al, bl ; ... + Core#); - - mov bx, AMD_MTRR_FIX64k_00000 - shl ebx, 16 ; - mov bh, al ; Slot# = (CoreIndex / 16) + 4; - shr bh, 4 ; - add bh, 4 ; - mov bl, (CORE1_STACK_SIZE / 1000h) - - mul bl ; Base = ( (CoreIndex * Size) ... - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE1_STACK_BASE_ADDR ; ... + Base_Addr); - mov ebp, eax - .endif - - ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR) - mov edi, WB_DRAM_TYPE ; Load Cache type in 1st slot - mov cl, bh ; ShiftCount = ((slot# ... - and cl, 03h ; ... % 4) ... - shl cl, 3 ; ... * 8); - shl edi, cl ; Cache type is now in correct position - ror ebx, 16 ; Get the MTRR address - movzx ecx, bx ; - rol ebx, 16 ; Put slot# & size back in BX - _RDMSR ; Read-modify-write the MSR - .if (bh < 4) ; Is value in lower or upper half of MSR? - or eax, edi ; - .else ; - or edx, edi ; - .endif ; - _WRMSR ; - - ; Enable MTRR defaults as UC type - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Read-modify-write the MSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Close the modification window on the Fixed MTRRs - mov ecx, MTRR_SYS_CFG ; MSR:0C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_EN ; MtrrFixDramEn - bts eax, MTRR_VAR_DRAM_EN ; variable MTRR enable bit - btr eax, MTRR_FIX_DRAM_MOD_EN ; Turn off modification enable bit - _WRMSR - - ; Enable caching in CR0 - mov eax, CR0 ; Enable WT/WB cache - btr eax, CR0_PG ; Make sure paging is disabled - btr eax, CR0_CD ; Clear CR0 NW and CD - btr eax, CR0_NW - mov CR0, eax - - ; Use the Stack Base & size to calculate SS and ESP values - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; - mov esp, ebp ; Initialize the stack pointer - mov edi, esp ; Copy the stack start to edi - movzx bx, bl - movzx ebx, bx ; Clear upper ebx, don't need MSR addr anymore - shl ebx, 12 ; Make size full byte count (* 4K) - add esp, ebx ; Set the Stack Pointer as full linear address - sub esp, 4 - ; - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - 32b start address of stack block - ; ebx - size of stack block - ; esp - 32b linear stack pointer - ; - - ; Determine mode for SS base; - mov ecx, CR0 ; Check for 32-bit protect mode - bt ecx, CR0_PE ; - .if (!carry?) ; PE=0 means real mode - mov cx, cs ; - .if (cx >= 0D000h) ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000 - ; alter SS:ESP for 16b Real Mode: - mov eax, edi ; - shr eax, 4 ; Create a Real Mode segment for ss, ds, es - mov ss, ax ; - mov ds, ax ; - mov es, ax ; - shl eax, 4 ; - sub edi, eax ; Adjust the clearing pointer for Seg:Offset mode - mov esp, ebx ; Make SP an offset from SS - sub esp, 4 ; - .endif ; endif - ; else - ; Default is to use Protected 32b Mode - .endif - ; - ; Clear The Stack - ; Now that we have set the location and the MTRRs, initialize the cache by - ; reading then writing to zero all of the stack area. - ; review: - ; ss - Stack base - ; esp - stack pointer - ; ebx - size of stack block - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - address of start of stack block - ; - shr ebx, 2 ; - mov cx, bx ; set cx for size count of DWORDS - ; Check our flags - Don't clear an existing stack - .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) ) - cld - mov esi, edi - rep lods DWORD PTR [esi] ; Pre-load the range - xor eax, eax - mov cx, bx - mov esi, edi ; Preserve base for push on stack - rep stos DWORD PTR [edi] ; Clear the range - mov DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword - shl ebx, 2 ; Put stack size and base - push ebx ; in top of stack - push esi - - mov ecx, ebx ; Return size of stack in bytes - mov eax, AGESA_SUCCESS ; eax = AGESA_SUCCESS : no error return code - .else - movzx ecx, cx - shl ecx, 2 ; Return size of stack, in bytes - mov eax, esi - shr eax, 24 ; Keep the flags as part of the error report - or eax, 40000000h ; eax = AGESA_WARNING (Stack has already been set up) - .endif -AmdEnableStackExit: - movd ebx, mm0 ; Restore return address - movd ebp, mm1 -ENDM - -;====================================================================== -; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -; should only be executed on the BSP -; -; In: -; none -; -; Out: -; EAX = AGESA_SUCCESS -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, esp -;====================================================================== -AMD_DISABLE_STACK MACRO - - mov esp, ebx ; Save return address - - ; get node/core/flags of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - - ; Turn on modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable modifications - _WRMSR - - ; Set lower 640K MTRRs for Write-Back memory caching - mov ecx, AMD_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR ; 0 - 512K = WB Mem - mov ecx, AMD_MTRR_FIX16k_80000 - _WRMSR ; 512K - 640K = WB Mem - - ; Turn off modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable modification - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable 'normal' cache operations - - mov ebx, esp ; restore return address (ebx) - xor eax, eax - -ENDM diff --git a/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index cf111ac2b7..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,670 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 22910 $ @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $ -; -; **************************************************************************** -; * -; * Copyright (C) 2012 Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -DDR2133 EQU ( 1 SHL (DDR2133_FREQUENCY / 66)) -DDR2400 EQU ( 1 SHL (DDR2400_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -LR_DIMM0 EQU 0001h -LR_DIMM1 EQU 0010h -LR_DIMM2 EQU 0100h -LR_DIMM3 EQU 1000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; < -; < CS POPULATION MASKS -; -CS_ANY_ EQU 0FFh -CS0_ EQU 01h -CS1_ EQU 02h -CS2_ EQU 04h -CS3_ EQU 08h -CS4_ EQU 10h -CS5_ EQU 20h -CS6_ EQU 40h -CS7_ EQU 80h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; -; DIMM VOLTAGE MASK -; -VOLT_ANY_ EQU 0FFh -VOLT1_5_ EQU 01h -VOLT1_35_ EQU 02h -VOLT1_25_ EQU 04h -; -; NOT APPLICIABLE -; -NA_ EQU 00h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed -PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs -PSO_SOLDERED_DOWN_SODIMM_TYPE EQU 15 ; < Soldered down SODIMM type -PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V -PSO_MIN_RD_WR_DATAEYE_WIDTH EQU 17 ; < Min RD/WR dataeye width -PSO_CPU_FAMILY_TO_OVERRIDE EQU 18 ; < CPU family signature to tell following PSO macros are CPU family dependent -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ********************************** -; * TABLE DRIVEN PSO SPECIFIC ENTRIES -; ********************************** -; Condition descriptor -PSO_TBLDRV_CONFIG EQU 200 ; < Configuration Descriptor - -; Overriding entry types -PSO_TBLDRV_START EQU 210 ; < Start of Table Driven Overriding Entry Types -PSO_TBLDRV_SPEEDLIMIT EQU 210 ; < Speed Limit -PSO_TBLDRV_ODT_RTTNOM EQU 211 ; < RttNom -PSO_TBLDRV_ODT_RTTWR EQU 212 ; < RttWr -PSO_TBLDRV_ODTPATTERN EQU 213 ; < Odt Patterns -PSO_TBLDRV_ADDRTMG EQU 214 ; < Address/Timing values -PSO_TBLDRV_ODCCTRL EQU 215 ; < ODC Control values -PSO_TBLDRV_SLOWACCMODE EQU 216 ; < Slow Access Mode -PSO_TBLDRV_MR0_CL EQU 217 ; < MR0[CL] -PSO_TBLDRV_MR0_WR EQU 218 ; < MR0[WR] -PSO_TBLDRV_RC2_IBT EQU 219 ; < RC2[IBT] -PSO_TBLDRV_RC10_OPSPEED EQU 220 ; < RC10[Opearting Speed] -PSO_TBLDRV_LRDIMM_IBT EQU 221 ; < LrDIMM IBT -PSO_TBLDRV____TRAINING EQU 222 ; < training -PSO_TBLDRV_INVALID_TYPE EQU 223 ; < Invalid Type -PSO_TBLDRV_END EQU 223 ; < End of Table Driven Overriding Entry Types - - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CPU_FAMILY_TO_OVERRIDE MACRO CpuFamilyRevision:REQ - DB PSO_CPU_FAMILY_TO_OVERRIDE - DB 4 - DD CpuFamilyRevision -ENDM - -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 7 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 4 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 7 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 12 - DB SocketID - DB ChannelID - DB DimmID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID: REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_RXEN_SEED - DB 21 - DB SocketID - DB ChannelID - DB DimmID - DW Byte0Seed - DW Byte1Seed - DW Byte2Seed - DW Byte3Seed - DW Byte4Seed - DW Byte5Seed - DW Byte6Seed - DW Byte7Seed - DW ByteEccSeed -ENDM - -NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ - DB PSO_NO_LRDIMM_CS67_ROUTING - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -SOLDERED_DOWN_SODIMM_TYPE MACRO SocketID:REQ, ChannelID:REQ - DB PSO_SOLDERED_DOWN_SODIMM_TYPE - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO - DB PSO_LVDIMM_VOLT1_5_SUPPORT - DB 4 - DB ANY_SOCKET - DB ANY_CHANNEL - DB ALL_DIMMS - DB 1 -ENDM - -MIN_RD_WR_DATAEYE_WIDTH MACRO SocketID:REQ, ChannelID:REQ, MinRdDataeyeWidth:REQ, MinWrDataeyeWidth:REQ - DB PSO_MIN_RD_WR_DATAEYE_WIDTH - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB MinRdDataeyeWidth - DB MinWrDataeyeWidth -ENDM - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -; ***************************************************************************************** -; * -; * TABLE DRIVEN OVERRIDE MACROS -; * -; ***************************************************************************************** -; Configuration sub-descriptors -CONFIG_GENERAL EQU 0 -CONFIG_SPEEDLIMIT EQU 1 -CONFIG_RC2IBT EQU 2 -CONFIG_DONT_CARE EQU 3 -Config_Type TEXTEQU <DWORD> -; -; Configuration Macros -; -TBLDRV_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ - DB PSO_TBLDRV_CONFIG - DB 9 - DB CONFIG_GENERAL - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig -ENDM - -TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Dimms:REQ, NumOfSR:REQ, NumOfDR:REQ, NumOfQR:REQ, NumOfLRDimm:REQ - DB PSO_TBLDRV_CONFIG - DB 7 - DB CONFIG_SPEEDLIMIT - DB DimmPerCH - DB Dimms - DB NumOfSR - DB NumOfDR - DB NumOfQR - DB NumOfLRDimm -ENDM - -TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ, NumOfReg:REQ - DB PSO_TBLDRV_CONFIG - DB 10 - DB CONFIG_RC2IBT - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig - DB NumOfReg -ENDM -; -; Overriding Macros -; -TBLDRV_CONFIG_ENTRY_SPEEDLIMIT MACRO SpeedLimit1_5:REQ, SpeedLimit1_35:REQ, SpeedLimit1_25:REQ - DB PSO_TBLDRV_SPEEDLIMIT - DB 6 - DW SpeedLimit1_5 - DW SpeedLimit1_35 - DW SpeedLimit1_25 -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTNOM MACRO TgtCS:REQ, RttNom:REQ - DB PSO_TBLDRV_ODT_RTTNOM - DB 2 - DB TgtCS - DB RttNom -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTWR MACRO TgtCS:REQ, RttWr:REQ - DB PSO_TBLDRV_ODT_RTTWR - DB 2 - DB TgtCS - DB RttWr -ENDM - -TBLDRV_CONFIG_ENTRY_ODTPATTERN MACRO RdODTCSHigh:REQ, RdODTCSLow:REQ, WrODTCSHigh:REQ, WrODTCSLow:REQ - DB PSO_TBLDRV_ODTPATTERN - DB 16 - DD RdODTCSHigh - DD RdODTCSLow - DD WrODTCSHigh - DD WrODTCSLow -ENDM - -TBLDRV_CONFIG_ENTRY_ADDRTMG MACRO AddrTmg:REQ - DB PSO_TBLDRV_ADDRTMG - DB 4 - DD AddrTmg -ENDM - -TBLDRV_CONFIG_ENTRY_ODCCTRL MACRO OdcCtrl:REQ - DB PSO_TBLDRV_ODCCTRL - DB 4 - DD OdcCtrl -ENDM - -TBLDRV_CONFIG_ENTRY_SLOWACCMODE MACRO SlowAccMode:REQ - DB PSO_TBLDRV_SLOWACCMODE - DB 1 - DB SlowAccMode -ENDM - -TBLDRV_CONFIG_ENTRY_RC2_IBT MACRO TgtDimm:REQ, IBT:REQ - DB PSO_TBLDRV_RC2_IBT - DB 2 - DB TgtDimm - DB IBT -ENDM - -TBLDRV_OVERRIDE_MR0_CL MACRO RegValOfTcl:REQ, MR0CL13:REQ, MR0CL0:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_CL - DB 3 - DB RegValOfTcl - DB MR0CL13 - DB MR0CL0 -ENDM - -TBLDRV_OVERRIDE_MR0_WR MACRO RegValOfTwr:REQ, MR0WR:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_WR - DB 2 - DB RegValOfTcl - DB MR0WR -ENDM - -TBLDRV_OVERRIDE_RC10_OPSPEED MACRO Frequency:REQ, MR10OPSPEED:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_RC10_OPSPEED - DB 5 - DD Frequency - DB MR10OPSPEED -ENDM - -TBLDRV_CONFIG_ENTRY_LRDMM_IBT MACRO F0RC8:REQ, F1RC0:REQ, F1RC1:REQ, F1RC2:REQ - DB PSO_TBLDRV_LRDIMM_IBT - DB 4 - DB F0RC8 - DB F1RC0 - DB F1RC1 - DB F1RC2 -ENDM - -TBLDRV_CONFIG_ENTRY____TRAINING MACRO Training__Mode:REQ - DB PSO_TBLDRV____TRAINING - DB 1 - DB Training__Mode -ENDM - -; -; Macros for removing entries -; -INVALID_CONFIG_FLAG EQU 8000h - -TBLDRV_INVALID_CONFIG MACRO - DB PSO_TBLDRV_INVALID_TYPE - DB 0 -ENDM -; ***************************************************************************************** -; * -; * END OF TABLE DRIVEN OVERRIDE MACROS -; * -; *****************************************************************************************
\ No newline at end of file diff --git a/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm deleted file mode 100644 index fcc18bf278..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2676 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 50871 $ $Date: 2011-04-14 15:39:51 -0600 (Thu, 14 Apr 2011) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - .mmx - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN UINT32 C1ePlatformData1; -; IN UINT32 C1ePlatformData2; -; IN UINT32 C1ePlatformData3; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN UseAtmMode; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> - sOemCallout <AGESA_EXTERNAL____TRAIN_VREF_CHANGE, OFFSET my__TrainVrefChange> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc deleted file mode 100644 index 617be484b0..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc +++ /dev/null @@ -1,2989 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 60222 $ @e \$Date: 2011-10-10 23:39:36 -0600 (Mon, 10 Oct 2011) $ -; -; **************************************************************************** -; * -; * Copyright (C) 2012 Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h - AGESA_EXTERNAL____TRAIN_VREF_CHANGE EQU 00028146h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h - - ; AGESA FCH CALLOUTS - AGESA_FCH_OEM_CALLOUT EQU 00028401h - -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - - -;----------------------------------------------------------------------------- -; FCH DEFINITIONS AND MACROS -; -;----------------------------------------------------------------------------- - -; Configuration values for SdConfig - SdDisable EQU 0 ; Disabled - SdAmda EQU 1 ; AMDA, set 24,18,16, default - SdDma EQU 2 ; DMA clear 24, 16, set 18 - SdPio EQU 3 ; PIO clear 24,18,16 -SD_MODE TEXTEQU <DWORD> - -; Configuration values for SdClockControl - Sd50MhzTraceCableLengthWithinSixInches EQU 4 ; 50Mhz, default - Sd40MhzTraceCableLengthSix2ElevenInches EQU 6 ; 40Mhz - Sd25MhzTraceCableLengthEleven2TwentyfourInches EQU 7 ; 25Mhz -SD_CLOCK_CONTROL TEXTEQU <DWORD> - -; Configuration values for AzaliaController - AzAuto EQU 0 ; Auto - Detect Azalia controller automatically - AzDisable EQU 1 ; Diable - Disable Azalia controller - AzEnable EQU 2 ; Enable - Enable Azalia controller -HDA_CONFIG TEXTEQU <DWORD> - -; Configuration values for IrConfig - IrDisable EQU 0 ; Disable - IrRxTx0 EQU 1 ; Rx and Tx0 - IrRxTx1 EQU 2 ; Rx and Tx1 - IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1 -IR_CONFIG TEXTEQU <DWORD> - -; Configuration values for SataClass - SataNativeIde EQU 0 ; Native IDE mode - SataRaid EQU 1 ; RAID mode - SataAhci EQU 2 ; AHCI mode - SataLegacyIde EQU 3 ; Legacy IDE mode - SataIde2Ahci EQU 4 ; IDE->AHCI mode - SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver) - SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver) -SATA_CLASS TEXTEQU <DWORD> - -; Configuration values for GppLinkConfig - PortA4 EQU 0 ; 4:0:0:0 - PortA2B2 EQU 2 ; 2:2:0:0 - PortA2B1C1 EQU 3 ; 2:1:1:0 - PortA1B1C1D1 EQU 4 ; 1:1:1:1 -GPP_LINKMODE TEXTEQU <DWORD> - -; Configuration values for FchPowerFail - AlwaysOff EQU 0 ; Always power off after power resumes - AlwaysOn EQU 1 ; Always power on after power resumes - UsePrevious EQU 3 ; Resume to same setting when power fails -POWER_FAIL TEXTEQU <DWORD> - -; Configuration values for SATA Link Speed - Gen1 EQU 1 ; SATA port GEN1 speed - Gen2 EQU 2 ; SATA port GEN2 speed - Gen3 EQU 3 ; SATA port GEN3 speed -SATA_SPEED TEXTEQU <DWORD> - -; Configuration values for GPIO function - Function0 EQU 0 ; GPIO Function 1 - Function1 EQU 1 ; GPIO Function 1 - Function2 EQU 2 ; GPIO Function 2 - Function3 EQU 3 ; GPIO Function 3 -GPIO_FUN TEXTEQU <DWORD> - -; Configuration values for GPIO_CFG - OwnedByEc EQU 1 ; This bit can only be written by EC - OwnedByHost EQU 2 ; This bit can only be written by host (BIOS) - Sticky EQU 4 ; If set, [6:3] are sticky - PullUpB EQU 8 ; 0: Pullup enable; 1: Pullup disabled - PullDown EQU 16 ; 0: Pulldown disabled; 1: Pulldown enable - GpioOutEnB EQU 32 ; 0: Output enable; 1: Output disable - GpioOut EQU 64 ; Output state when GpioOutEnB is 0 - GpioIn EQU 128 ; This bit is read only - current pin state -CFG_BYTE TEXTEQU <DWORD> - -; FCH GPIO CONTROL -GPIO_CONTROL STRUCT - GpioPin UINT8 ? ; Gpio Pin, valid range: 0-67, 128-150, 160-228 - PinFunction GPIO_FUN ? ; Multi-function selection - CfgByte CFG_BYTE ? ; GPIO Register value -GPIO_CONTROL ENDS - -; FCH SCI MAP CONTROL -SCI_MAP_CONTROL STRUCT - InputPin UINT8 ? ; Input Pin, valid range 0-63 - GpeMap UINT8 ? ; Gpe Map, valid range 0-31 -SCI_MAP_CONTROL ENDS - -; FCH SATA PHY CONTROL -SATA_PHY_CONTROL STRUCT - CommonPhy BOOLEAN ? ; Common PHY or not - Gen SATA_SPEED ? ; SATA speed - Port UINT8 ? ; Port number, valid range: 0-7 - PhyData UINT32 ? ; SATA PHY data, valid range: 0-0xFFFFFFFF -SATA_PHY_CONTROL ENDS - -; -; FCH Component Data Structure in InitReset stage -; -FCH_RESET_INTERFACE STRUCT - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - - Xhci0Enable BOOLEAN ? ; XHCI0 controller function - ; FALSE - XHCI0 controller disabled - ; TRUE - XHCI0 controller enabled - - Xhci1Enable BOOLEAN ? ; XHCI1 controller function - ; FALSE - XHCI1 controller disabled - ; TRUE - XHCI1 controller enabled - -FCH_RESET_INTERFACE ENDS - - -; -; FCH Component Data Structure from InitEnv stage -; -FCH_INTERFACE STRUCT - SdConfig SD_MODE ? ; Secure Digital (SD) controller mode - AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller - IrConfig IR_CONFIG ? ; Infrared (IR) Configuration - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - SataClass SATA_CLASS ? ; SATA controller mode - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller - ; FALSE - Legacy IDE mode - ; TRUE - Native IDE mode - Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function - ; FALSE - OHCI1 is disabled - ; TRUE - OHCI1 is enabled - Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function - ; FALSE - OHCI2 is disabled - ; TRUE - OHCI2 is enabled - Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function - ; FALSE - OHCI3 is disabled - ; TRUE - OHCI3 is enabled - Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function - ; FALSE - OHCI4 is disabled - ; TRUE - OHCI4 is enabled - XhciSwitch BOOLEAN ? ; XHCI controller Function - ; FALSE - XHCI is disabled - ; TRUE - XHCI is enabled - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - FchPowerFail POWER_FAIL ? ; FCH power failure option -FCH_INTERFACE ENDS - - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the - ; < currently installed processor - C1eModeHardware EQU 2 ; < Hardware method - C1eModeMsgBased EQU 3 ; < Message-based method - C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE - LOW_POWER_PSTATE_FOR_PROCHOT_AUTO EQU 0 ; < Auto - LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE EQU 1 ; < Disabled - MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU <DWORD> - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h -DESCRIPTOR_IGNORE EQU 40000000h - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port - ; 0 - Do not invert (default) - ; 1 - Invert P and N on this lane -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeAutoDetect EQU 11 - MaxConnectorType EQU 12 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - - -;IOMMU requestor ID -IOMMU_REQUESTOR_ID STRUCT - Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number -IOMMU_REQUESTOR_ID ENDS - -;IVMD exclusion range descriptor -IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT - Flags UINT32 ? ; Descriptor flags - ; @li @b Flags[31] - Terminate descriptor array. - ; @li @b Flags[30] - Ignore descriptor. - RequestorIdStart IOMMU_REQUESTOR_ID {} ; Requestor ID start - RequestorIdEnd IOMMU_REQUESTOR_ID {} ; Requestor ID end (use same as start for single ID) - RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range - RangeLength UINT64 ? ; Length of exclusion range in bytes -IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; LVDS Misc Control Field -LVDS_MISC_CONTROL_FIELD STRUCT - FpdiMode UINT8 ? - ;IN UINT8 FpdiMode:1; - ;IN UINT8 DlChSwap:1; - ;IN UINT8 VsyncActiveLow:1; - ;IN UINT8 HsyncActiveLow:1; - ;IN UINT8 BLONActiveLow:1; - ;IN UINT8 Reserved:3; -LVDS_MISC_CONTROL_FIELD ENDS - -; LVDS Misc Control -LVDS_MISC_CONTROL UNION - Field LVDS_MISC_CONTROL_FIELD {} - Value UINT8 ? -LVDS_MISC_CONTROL ENDS - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - IommuSupport BOOLEAN ? ; IOMMU support. - ; TRUE = Disable and hide IOMMU device. - ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table. - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported. - LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings. - Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode. - LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - GnbRemoteDisplaySupport BOOLEAN ? ; This item enables Wireless Display Support -GNB_ENV_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - DDR2100_FREQUENCY EQU 1050 ; < DDR 2100 - DDR2133_FREQUENCY EQU 1066 ; < DDR 2133 - DDR2400_FREQUENCY EQU 1200 ; < DDR 2400 - UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_AUTO EQU 2 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT_INITIAL EQU 0 ; < Initial value for VDDIO - VOLT1_5 EQU 1 ; < 1.5 Volt - VOLT1_35 EQU 2 ; < 1.35 Volt - VOLT1_25 EQU 3 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0FFh ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Force Training Mode - - FORCE_TRAIN_1D EQU 0 ; < 1D Training only - FORCE_TRAIN___ EQU 1 ; < - FORCE_TRAIN_AUTO EQU 2 ; < Auto -FORCE_TRAIN_MODE TEXTEQU <DWORD> - -; The possible DRAM prefetch mode settings. - DRAM_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_DRAM_PREFETCH_FOR_IO EQU 1 ; Disable DRAM prefetching for I/O requests only. - DISABLE_DRAM_PREFETCH_FOR_CPU EQU 2 ; Disable DRAM prefetching for requests from processor cores only. - DISABLE_DRAM_PREFETCHER EQU 3 ; Disable DRAM prefetching. - MAX_DRAM_FREFETCH_MODE EQU 4 ; Not a DRAM prefetch mode, use for limit checking. -DRAM_PREFETCH_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_4MB_ALIGNED EQU 00FFFFC0h - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqs__Dlys POINTER ? ; < Read DQS data - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RcvEnDlysMemPs1 POINTER ? ; < DQS Receiver Enable Delays for Memory Pstate 1 - WrDqsDlysMemPs1 POINTER ? ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3) - RdDqsDlysMemPs1 POINTER ? ; < Read Dqs delays for Memory Pstate 1 - WrDatDlysMemPs1 POINTER ? ; < Write Data delays for Memory Pstate 1 - RdDqs__DlysMemPs1 POINTER ? ; < Read DQS data for Memory Pstate 1 - RdDqsMinDlysMemPs1 POINTER ? ; < Minimum Window for Read DQS for Memory Pstate 1 - RdDqsMaxDlysMemPs1 POINTER ? ; < Maximum Window for Read DQS for Memory Pstate 1 - WrDatMinDlysMemPs1 POINTER ? ; < Minimum Window for Write data for Memory Pstate 1 - WrDatMaxDlysMemPs1 POINTER ? ; < Maximum Window for Write data for Memory Pstate 1 - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - FailingBitMaskMemPs1 POINTER ? ; < Table of masks to Track Failing bits for Memory Pstate 1 - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 (4) DUP (?) ; < Max Read Latency (ns) for the DCT - ; < DctMaxRdLat [i] is for NBPstate i DIMMValidCh UINT8 ? ; < DIMM# in CH - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - DimmNibbleAccess UINT8 ? ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - MaxVref UINT8 ? ; < Maximum Vref Value for channel - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - TimingsMemPs1 POINTER ? ; < Pointed to channel timing structure for Memory Pstate 1 - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT - BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - ExternalVrefValue UINT8 ? ; < Target reference voltage for external Vref for training - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. - ExternalVrefCtl BOOLEAN ? ; < Control the use of external Vref - ; < TRUE = AGESA will use the function defined in "AGESA_EXTERNAL____TRAIN_VREF_CHANGE" in function list - ; < to change the vref - ; < FALSE = AGESA will will use the internal vref control. - ForceTrainMode FORCE_TRAIN_MODE ? ; < Training Mode - ; < 0 = Force 1D Training for all configurations - ; < 1 = Force training for all configurations - ; < 2 = Auto - AGESA will control -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - -; =============================================================================== -; Bitfield for ID -; =============================================================================== -ID_FIELD STRUCT - SocketId UINT16 ? -; OUT UINT16 SocketId:8; ; < Socket ID -; OUT UINT16 ModuleId:8; ; < Module ID -ID_FIELD ENDS - -; =============================================================================== -; Union for ID of socket and module that will be passed out in call out -; =============================================================================== -ID_INFO UNION - IdField ID_FIELD {} ; < Bitfield for ID - IdInformation UINT16 ? ; < ID information for call out -ID_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range -MEM_ERROR_NO____RDDQS_WINDOW EQU 040D0300h ; < No RdDqs Window -MEM_ERROR_NO____RDDQS_HEIGHT EQU 040E0300h ; < No RdDqs Height -MEM_ERROR____DQS_ERROR EQU 040F0300h ; < RdDqs Error -MEM_ERROR_INVALID____RDDQS_VALUE EQU 04022400h ; < RdDqs invalid value found -MEM_ERROR____DQS_VREF_MARGIN_ERROR EQU 04023400h ; < RdDqs Vef Margin error found -MEM_ERROR_LR_IBT_NOT_FOUND EQU 04013500h ; < No LR dimm IBT value is found -MEM_ERROR_MR0_NOT_FOUND EQU 04023500h ; < No MR0 value is found -MEM_ERROR_ODT_PATTERN_NOT_FOUND EQU 04033500h ; < No odt pattern value is found -MEM_ERROR_RC2_IBT_NOT_FOUND EQU 04043500h ; < No RC2 IBT value is found -MEM_ERROR_RC10_OP_SPEED_NOT_FOUND EQU 04053500h ; < No RC10 op speed is found -MEM_ERROR_RTT_NOT_FOUND EQU 04063500h ; < No RTT value is found -MEM_ERROR_P___NOT_FOUND EQU 04073500h ; < No training config value is found -MEM_ERROR_SAO_NOT_FOUND EQU 04083500h ; < No slow access mode, Address timing and Output driver compensation value is found -MEM_ERROR_CLK_DIS_MAP_NOT_FOUND EQU 04093500h ; < No CLK disable map is found -MEM_ERROR_CKE_TRI_MAP_NOT_FOUND EQU 040A3500h ; < No CKE tristate map is found -MEM_ERROR_ODT_TRI_MAP_NOT_FOUND EQU 040B3500h ; < No ODT tristate map is found -MEM_ERROR_CS_TRI_MAP_NOT_FOUND EQU 040C3500h ; < No CS tristate map is found -MEM_ERROR_TRAINING_SEED_NOT_FOUND EQU 040D3500h ; < No training seed is found - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_ECC_DIS EQU 04041700h ; < ECC has been disabled as a result of an internal issue - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 04012400h ; < DDR3 voltage initial value is not 0 - MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 04012500h ; < Cannot find a commonly supported VDDIO - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR___ EQU 040B1F00h ; < Heap allocation error for training data - MEM_ERROR_HEAP_DEALLOCATE_FOR___ EQU 040C1F00h ; < Heap de-allocation error for training data - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; Other CPU events (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h -CPU_EVENT_STACK_REENTRY EQU 008020500h -CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table - AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible hardware prefetch mode settings. - HARDWARE_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_L1_PREFETCHER EQU 1 ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching. - DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 2 ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. - DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 3 ; Use the recommended settings for the hardware prefetcher, but disable both the L1 prefetcher and training on software prefetches. - DISABLE_HARDWARE_PREFETCH EQU 4 ; Disable hardware prefetching. - MAX_HARDWARE_PREFETCH_MODE EQU 5 ; Not a hardware prefetch mode, use for limit checking. -HARDWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; The possible software prefetch mode settings. - SOFTWARE_PREFETCHES_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_SOFTWARE_PREFETCHES EQU 1 ; Disable software prefetches (convert software prefetch instructions to NOP). - MAX_SOFTWARE_PREFETCH_MODE EQU 2 ; Not a software prefetch mode, use for limit checking. -SOFTWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; Advanced performance tunings, prefetchers. -; These settings provide for performance tuning to optimize for specific workloads. -ADVANCED_PERFORMANCE_PROFILE STRUCT - HardwarePrefetchMode HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting. - SoftwarePrefetchMode SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions. - DramPrefetchMode DRAM_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. -ADVANCED_PERFORMANCE_PROFILE ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {} ; < The advanced platform performance settings. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; FCH Platform Configuration Policy -FCH_PLATFORM_POLICY STRUCT - CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address - CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address - CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range - CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block - CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block - CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block - CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block - CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block - CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block - CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block - CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM - CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address - CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller - CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address - CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller - CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller - CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller - CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode - CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode - CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode - CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode - CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI - CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI - CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge - CfgSdSsid UINT32 ? ; Subsystem ID of SecureDigital controller - CfgXhciSsid UINT32 ? ; Subsystem ID of XHCI - CfgFchPort80BehindPcib BOOLEAN ? ; Is port80 cycle going to the PCI bridge - CfgFchEnableAcpiSleepTrap BOOLEAN ? ; ACPI sleep SMI enable/disable - CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration - CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present - CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present - CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present - CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present - CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable - CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable - CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable - CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable - - CfgFchEsataPortBitMap UINT8 ? ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable - CfgFchIrPinControl UINT8 ? ; Register bitfield describing Infrared Pin Control: - CfgFchSdClockControl SD_CLOCK_CONTROL ? ; FCH SD Clock Control - CfgFchSciMapControl POINTER ? ; FCH SCI Mapping Control - CfgFchSataPhyControl POINTER ? ; FCH SATA PHY Control - CfgFchGpioControl POINTER ? ; FCH GPIO Control -FCH_PLATFORM_POLICY ENDS - - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionPStatesInHpcMode BOOLEAN ? ; < PSTATES_HPC_MODE - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgLowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Low power Pstate for PROCHOT mode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - FchBldCfg POINTER ? ; < FCH platform build configuration policy - CfgIommuSupport BOOLEAN ? ; IOMMU support - CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported - CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings - CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode - CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - CfgExternalVrefCtlFeature BOOLEAN ? ; External Vref control - CfgForceTrainMode FORCE_TRAIN_MODE ? ; < Force Train Mode - CfgGnbRemoteDisplaySupport BOOLEAN ? ; Wireless Display Support - CfgIvrsExclusionRangeList POINTER ? ; IOMMU Exclusion Range List - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - LowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - PStatesInHpcMode BOOLEAN ? ; < High performance computing (HPC) mode - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. - ExtMaxCapacity UINT64 ? ; < The maximum memory capacity, in bytes, - ; < for this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Reserved2:3; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; < Serial Number. - PartNumber UINT8 (18) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; < Socket ID -; OUT UINT8 Channel:2 ; < Channel ID -; OUT UINT8 Dimm:2 ; < DIMM ID -; OUT UINT8 DimmPresent:1 ; < Dimm Present - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - ConfigSpeed UINT16 ? ; < Configured memory clock speed - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. - ExtEndingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_ONE EQU 5 ; < Level to 1 core - CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores - CoreLevelModeMax EQU 19 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery - FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table - AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f15/Legacy/amd.inc b/src/vendorcode/amd/agesa/f15/Legacy/amd.inc deleted file mode 100644 index d89c942ebf..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/amd.inc +++ /dev/null @@ -1,460 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_GET_EXECACHE_SIZE EQU 00020010h - AMD_LATE_RUN_AP_TASK EQU 00020011h - AMD_IDENTIFY_DIMMS EQU 00020012h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc deleted file mode 100644 index 043c589c32..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc +++ /dev/null @@ -1,575 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; -; **************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm deleted file mode 100644 index 5bebc1a29c..0000000000 --- a/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm +++ /dev/null @@ -1,671 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.xmm -.model flat -ASSUME FS:NOTHING -.code - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ - -public WriteIo8 -WriteIo8 PROC NEAR C USES DX AX Address:WORD, Data:Byte - mov dx, Address - mov al, Data - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ -public WriteIo16 -WriteIo16 PROC NEAR C USES DX AX Address:WORD, Data:WORD - mov dx, Address - mov ax, Data - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] Address IO port address -; * @param[in] Data IO port Value -; */ - -public WriteIo32 -WriteIo32 PROC NEAR C USES DX EAX Address:WORD, Data:DWORD - mov dx, Address - mov eax, Data - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] - IO port address -; * @retval IO port Value -; */ -public ReadIo8 -ReadIo8 PROC NEAR C USES DX Address:WORD - mov dx, Address - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] Address IO port address -; * @retval IO port Value -; */ -public ReadIo16 -ReadIo16 PROC NEAR C USES DX Address:WORD - mov dx, Address - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] Address IO port address -; * @retval IO port Value -; */ -public ReadIo32 -ReadIo32 PROC NEAR C USES DX Address:WORD - mov dx, Address - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] Address MSR Address -; * @param[in] Data Pointer to data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdMsrRead -LibAmdMsrRead PROC NEAR C USES ECX ESI EDX Address:DWORD, Value:PTR, ConfigPtr:PTR - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov ecx, Address - rdmsr - mov esi, Value - mov [esi], eax - mov [esi+4], edx - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] Address MSR Address -; * @param[in] Data Pointer to data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdMsrWrite -LibAmdMsrWrite PROC NEAR C USES ECX ESI EDX Address:DWORD, Data:PTR, ConfigPtr:PTR - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov ecx, Address - mov esi, Data - mov eax, [esi] - mov edx, [esi+4] - wrmsr - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] Func CPUID function -; * @param[in] DATA Pointer to CPUID_DATA to save cpuid data -; * @param[in] ConfigPtr (Optional) -; */ -public LibAmdCpuidRead -LibAmdCpuidRead PROC NEAR C Func:DWORD, DATA:PTR, ConfigPtr:PTR - pushad - mov esi, ConfigPtr ;Dummy read to avoid compilation warning - mov eax, Func - cpuid - mov esi, DATA - mov [esi], eax - mov [esi+4], ebx - mov [esi+8], ecx - mov [esi+12],edx - popad - ret -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * -; */ - -public ReadTSC -ReadTSC PROC NEAR C - rdtsc - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Set FS_BASE -; * -; * -; * -; * @param[in] esi - Low Dword of physical address -; * @param[in] edi - High Dword of physical address -; */ -SetFsBase PROC NEAR PUBLIC USES EAX EBX ECX EDX EDI - - mov eax, ecx - mov ecx, 0C0010015h ; HWCR - rdmsr - mov ebx, eax - bts eax, 17 ; HWCR.Wrap32Dis - wrmsr - xchg edx, edi - mov eax, esi - mov esi, ebx - - mov ecx, 0C0000100h ; FS_BASE - wrmsr - ret - -SetFsBase ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Restore MSR0C001_0015 -; * -; * @param[in] esi - Low Dword -; * @param[in] edi - High Dword -; */ -RestoreHwcr PROC NEAR PUBLIC USES EAX ECX EDX - - mov ecx, 0C0010015h - mov eax, esi - mov edx, edi - wrmsr - ret - -RestoreHwcr ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] Address - Memory Address -; * @retval Memory byte at given address -; */ -Read64Mem8 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov al, fs:[ebx] - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov al, ds:[esi] -Done: - ret - -Read64Mem8 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] Address - Memory Address -; * @retval Memory word at given address -; */ -Read64Mem16 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov ax, fs:[ebx] - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov ax, ds:[esi] -Done: - - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] Address - Memory Address -; * @retval Memory dword at given address -; */ -Read64Mem32 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov eax, fs:[ebx] - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov eax, ds:[esi] -Done: - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ - -Write64Mem8 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:BYTE - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov al, Data - mov fs:[ebx], al - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov al, Data - mov ds:[esi], al -Done: - - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ -Write64Mem16 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:WORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov ax, Data - mov fs:[ebx], ax - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov ax, Data - mov ds:[esi], ax -Done: - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] Address - Memory Address -; * @param[in] Value - Value to write -; */ -Write64Mem32 PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:DWORD - - mov esi, DWORD PTR Address[0] - mov edi, DWORD PTR Address[4] - test edi, edi - jz AccesBelow4G - - push fs - call SetFsBase - xor ebx, ebx - mov eax, Data - mov fs:[ebx], eax - call RestoreHwcr - pop fs - jmp Done -AccesBelow4G: - mov eax, Data - mov ds:[esi], eax - -Done: - - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] Reg Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] Value Value to write -; */ - -LibAmdReadCpuReg PROC NEAR C Reg:BYTE, Value:NEAR PTR DWORD - pushad - push ds - - .if(Reg == 00h) - mov eax, cr0 - .elseif(Reg == 04h) - mov eax, cr4 - .elseif(Reg == 10h) - mov eax, dr0 - .elseif(Reg == 11h) - mov eax, dr1 - .elseif(Reg == 12h) - mov eax, dr2 - .elseif(Reg == 13h) - mov eax, dr3 - .elseif(Reg == 17h) - mov eax, dr7 - .else - xor eax,eax - .endif - - mov edi, Value - mov [edi], eax - - pop ds - popad - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] Reg Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] Value Value to write -; */ - -LibAmdWriteCpuReg PROC NEAR C Reg:BYTE, Value:DWORD - mov eax, Value - - .if(Reg == 00h) - mov cr0, eax - .elseif(Reg == 4) - mov cr4, eax - .elseif(Reg == 10h) - mov dr0, eax - .elseif(Reg == 11h) - mov dr1, eax - .elseif(Reg == 12h) - mov dr2, eax - .elseif(Reg == 13h) - mov dr3, eax - .elseif(Reg == 17h) - mov dr7, eax - .endif - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC NEAR C - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC NEAR C -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC NEAR C - pushad - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popad - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] Address IO Port Address -; * @param[in] Value Value to write -; * @param[in] Flag IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC NEAR C Address:DWORD, Value:DWORD ,Flag:DWORD - push edx - push eax - push ebx - mov edx, Address - mov eax, Value - mov ebx, Flag - out dx, eax - pop ebx - pop eax - pop edx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC NEAR C - - pushad - - mov ecx, 0C001100Ah ;bit 0 = HDT redirect - mov edi, 09C5A203Ah ;Password - RDMSR ; - or al, 1 ; - WRMSR ; - mov al, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - popad - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with . -; * -; * @param[in] Value Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC NEAR C Value:DWORD - mov eax, Value - bsf eax, Value - .if (Zero?) - mov al,32 - .endif - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] Value Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC NEAR C Value:DWORD - mov eax, Value - bsr eax, Value - .if (Zero?) - mov al,0FFh - .endif - ret -LibAmdBitScanReverse ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Flush specified number of cache line -; * -; * @param[in] Address Physical address to be flushed -; * @param[in] Count number of cachelines to be flushed -; */ -PUBLIC LibAmdCLFlush -LibAmdCLFlush PROC NEAR C Address:QWORD, Count:BYTE - pushad - mov ecx, 0C0010015h ; HWCR - rdmsr - mov esi, eax - mov edi, edx - bts eax, 17 ; HWCR.Wrap32Dis - wrmsr - xor eax, eax - mov edx, DWORD PTR Address[4] - mov ecx, 0C0000100h ; FS_BASE - wrmsr - mov eax, DWORD PTR Address[0] - movzx ecx, Count - @@: - mfence - clflush fs:[eax] - mfence - add eax,64 - loop @B - call RestoreHwcr - popad - ret -LibAmdCLFlush ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm deleted file mode 100644 index 18b8ee4dde..0000000000 --- a/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm +++ /dev/null @@ -1,110 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the right. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_aullshr PROC NEAR C PUBLIC - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov eax, edx - xor edx, edx - .endif - shrd eax, edx, cl - shr edx, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_aullshr ENDP - -;/*++ -; -;Routine Description: -; -; Shifts a UINT64 to the left. -; -;Arguments: -; -; EDX:EAX - UINT64 value to be shifted -; CL - Shift count -; -;Returns: -; -; EDX:EAX - shifted value -; -;--*/ -_allshl PROC NEAR C PUBLIC USES CX - .if (cl < 64) - .if (cl >= 32) - sub cl, 32 - mov edx, eax - xor eax, eax - .endif - shld edx, eax, cl - shl eax, cl - .else - xor eax, eax - xor edx, edx - .endif - ret -_allshl ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm deleted file mode 100644 index 9c098a69ae..0000000000 --- a/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm +++ /dev/null @@ -1,84 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 32bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 9201 $ @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -; void *memcpy( void *dest, void *src, size_t count ); -; -; Copy count bytes from src to dest, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memcpy -memcpy PROC NEAR C PUBLIC USES ECX EDI ESI dest:DWORD, src:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov esi, src - mov ecx, count - rep movsb - mov eax, dest - popf - ret -memcpy ENDP - -; void *memset( void *dest, int c, size_t count ); -; -; At dest, set count bytes to byte value, returning dest. -; ("c" is not legal as an assembly parameter name, replaced with value.) -; Assume ES is set appropriately, 32 bit flat. -; -public memset -memset PROC NEAR C PUBLIC USES ECX EDI dest:DWORD, value:DWORD, count:DWORD - pushf - cld ; We will increment through *dest - mov edi, dest - mov eax, value - mov ecx, count - rep stosb - mov eax, edi - popf - ret -memset ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm b/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm deleted file mode 100644 index 8ec78d11da..0000000000 --- a/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm +++ /dev/null @@ -1,591 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 64bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - -.code -;/*++ - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] CX IO port address -; * @param[in] DL IO port Value -; */ - -PUBLIC WriteIo8 -WriteIo8 PROC - mov al, dl - mov dx, cx - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] CX IO port address -; * @param[in] DX IO port Value -; */ -PUBLIC WriteIo16 -WriteIo16 PROC - mov ax, dx - mov dx, cx - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] CX IO port address -; * @param[in] EDX IO port Value -; */ - -PUBLIC WriteIo32 -WriteIo32 PROC - mov eax, edx - mov dx, cx - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] CX IO port address -; * @retval AL IO port Value -; */ -PUBLIC ReadIo8 -ReadIo8 PROC - mov dx, cx - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] CX IO port address -; * @retval AX IO port Value -; */ -PUBLIC ReadIo16 -ReadIo16 PROC - mov dx, cx - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] CX IO port address -; * @retval EAX IO port Value -; */ -PUBLIC ReadIo32 -ReadIo32 PROC - mov dx, cx - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrRead -LibAmdMsrRead PROC - push rsi - mov rsi, rdx - rdmsr - mov [rsi], eax - mov [rsi+4], edx - pop rsi - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrWrite -LibAmdMsrWrite PROC - push rsi - mov rsi, rdx - mov eax, [rsi] - and rax, 0ffffffffh - mov edx, [rsi+4] - and rdx, 0ffffffffh - wrmsr - pop rsi - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] RCX CPUID function -; * @param[in] RDX Pointer to CPUID_DATA to save cpuid data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdCpuidRead -LibAmdCpuidRead PROC - - push rbx - push rsi - mov rsi, rdx - mov rax, rcx - cpuid - mov [rsi], eax - mov [rsi+4], ebx - mov [rsi+8], ecx - mov [rsi+12],edx - pop rsi - pop rbx - ret - -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * @retval RAX Time stamp counter value -; */ - -PUBLIC ReadTSC -ReadTSC PROC - rdtsc - and rax, 0ffffffffh - shl rdx, 32 - or rax, rdx - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] RCX - Memory Address -; * @retval Memory byte at given address -; */ -PUBLIC Read64Mem8 -Read64Mem8 PROC - - xor rax, rax - mov al, [rcx] - ret - -Read64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] RCX - Memory Address -; * @retval Memory word at given address -; */ -PUBLIC Read64Mem16 -Read64Mem16 PROC - - xor rax, rax - mov ax, [rcx] - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] RCX - Memory Address -; * @retval Memory dword at given address -; */ -PUBLIC Read64Mem32 -Read64Mem32 PROC - - xor rax, rax - mov eax, [rcx] - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] RCX Memory Address -; * @param[in] DL Value to write -; */ - -PUBLIC Write64Mem8 -Write64Mem8 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], al - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] RCX Memory Address -; * @param[in] DX Value to write -; */ -PUBLIC Write64Mem16 -Write64Mem16 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], ax - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] RCX Memory Address -; * @param[in] EDX Value to write -; */ -PUBLIC Write64Mem32 -Write64Mem32 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], eax - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Pointer to value -; */ - -PUBLIC LibAmdReadCpuReg -LibAmdReadCpuReg PROC - - push rax - xor rax, rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - jmp RegRead -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - jmp RegRead -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - jmp RegRead -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - jmp RegRead -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - jmp RegRead -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - jmp RegRead -Reg17h: - cmp cl, 17h - jne RegRead - mov rax, dr7 -RegRead: - mov [rdx], eax - pop rax - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Value to write -; */ - -PUBLIC LibAmdWriteCpuReg -LibAmdWriteCpuReg PROC - - push rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - mov eax, edx - mov cr0, rax - jmp Done -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - mov eax, edx - mov cr4, rax - jmp Done -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - mov eax, edx - mov dr0, rax - jmp Done -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - mov eax, edx - mov dr1, rax - jmp Done -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - mov eax, edx - mov dr2, rax - jmp Done -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - mov eax, edx - mov dr3, rax - jmp Done -Reg17h: - cmp cl, 17h - jne Done - mov rax, dr7 - mov eax, edx - mov dr7, rax -Done: - pop rax - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC - pushfq - mov rax, 0BACCD00Bh ; Backdoor in SimNow - mov rbx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popfq - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] ECX IO Port Address -; * @param[in] EDX Value to write -; * @param[in] R8D IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC - push rbx - push rax - - mov ebx, r8d - mov eax, edx - mov edx, ecx - out dx, eax - - pop rax - pop rbx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC - - push rbx - - mov rcx, 0C001100Ah ;bit 0 = HDT redirect - mov rdi, 09C5A203Ah ;Password - rdmsr - and rax, 0ffffffffh - or rax, 1 - - wrmsr - - mov rax, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - pop rbx - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC - bsf eax, ecx - jnz nonZeroSource - mov al,32 -nonZeroSource: - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC - bsr eax, ecx - jnz nonZeroSource - mov al,0FFh -nonZeroSource: - ret -LibAmdBitScanReverse ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Flush specified number of cache line -; * -; * @param[in] RCX Physical address to be flushed -; * @param[in] DL number of cachelines to be flushed -; */ -PUBLIC LibAmdCLFlush -LibAmdCLFlush PROC - push rax - mov rax, rcx - movzx rcx, dl - @@: - mfence - clflush [rax] - mfence - add rax,64 - loop @B - pop rax - ret -LibAmdCLFlush ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm deleted file mode 100644 index 2ac72adfe0..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm +++ /dev/null @@ -1,113 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; LocalPciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -F10RevDProbeFilterCritical PROC NEAR C PUBLIC USES EAX ECX EDX, PciAddress:DWORD, LocalPciRegister:DWORD - - mov ecx, 0C001001Fh - rdmsr - push eax - push ecx - push edx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, LocalPciRegister - mov edx, PciAddress - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dx, 0CF8h ; Set Reg Config Space - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax - db 0Fh, 0AEh, 0F0h ; MFENCE - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - db 0Fh, 0AEh, 0F0h ; MFENCE - - out dx, eax ; move data to return position - db 0Fh, 0AEh, 0F0h ; MFENCE - - pop edx - pop ecx - pop eax - wrmsr - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm deleted file mode 100644 index 4e531ea5ab..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm +++ /dev/null @@ -1,127 +0,0 @@ -;/** -; * @file -; * -; * AGESA Family 10h Revision D support routines. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU/F10 -; * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - .LIST - -;=============================================== -;=============================================== -;== -;== M E M O R Y P R E S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .CODE - -;====================================================================== -; F10RevDProbeFilterCritical: Performs critical sequence for probe -; filter initialization. -; -; In: -; PciAddress Full PCI address of the node to init -; LocalPciRegister Current value of F3x1D4 -; -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC F10RevDProbeFilterCritical -F10RevDProbeFilterCritical PROC - - push rax - push rcx - push rdx - push rsi - push rdi - - mov esi, ecx - mov edi, edx - - mov ecx, 0C001001Fh - rdmsr - push rax - push rcx - push rdx - or dh, 40h - wrmsr - - mov eax, 810003D4h - - mov ecx, edi - mov edx, esi - - shr edx, 4 - and dh, 0F8h - or ah, dh - - or cl, 2 - mfence - - mov dx, 0CF8h ; Set Reg Config Space - mfence - - out dx, eax - mfence - - mov dl, 0FCh ; Set DX to Pci Config Data - mov eax, ecx ;Set config Reg data - mfence - - out dx, eax ; move data to return position - mfence - - pop rdx - pop rcx - pop rax - wrmsr - - pop rdi - pop rsi - pop rdx - pop rcx - pop rax - ret - -F10RevDProbeFilterCritical ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm deleted file mode 100644 index 1ce62cdb4d..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm +++ /dev/null @@ -1,362 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; * @e \$Revision: 47763 $ @e \$Date: 2011-02-27 18:11:57 -0700 (Sun, 27 Feb 2011) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE cpcarmac.inc - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y A B S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE -;====================================================================== -; ExecuteFinalHltInstruction: Disables the stack and performs -; a hlt instruction on an AP. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteFinalHltInstruction -ExecuteFinalHltInstruction PROC NEAR C USES ESI EDI HaltFlags:DWORD, ApMtrrSettingList:PTR, StandardHeader:PTR - - mov esi, StandardHeader ; The code must reference all parameters to avoid a build warning - mov esi, HaltFlags - mov edi, ApMtrrSettingList - ; Do these special steps in case if the core is part of a compute unit - ; Note: The following bits are family specific flags, that gets set during build time, - ; and indicates things like "family cache control methodology", etc. - ; esi bit0 = 0 -> not a Primary core - ; esi bit0 = 1 -> Primary core - ; esi bit1 = 0 -> Cache disable - ; esi bit1 = 1 -> Cache enable - .if (esi & 2h) - ; Set CombineCr0Cd bit - mov ecx, CU_CFG3 - _RDMSR - bts edx, (COMBINE_CR0_CD - 32) - _WRMSR - ; Clear the CR0.CD bit - mov eax, CR0 ; Make sure cache is enabled for all APs - btr eax, CR0_CD - btr eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .else - mov eax, CR0 ; Make sure cache is disabled for all APs - bts eax, CR0_CD ; Disable cache - bts eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .endif - - .if (esi & 1h) - ; This core is a primary core and needs to do all the MTRRs, including shared MTRRs. - mov esi, edi ; Get ApMtrrSettingList - - ; Configure the MTRRs on the AP so - ; when it runs remote code it will execute - ; out of RAM instead of ROM. - - ; Disable MTRRs and turn on modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - btr eax, MTRR_VAR_DRAM_EN ; Disable - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable - btr eax, MTRR_FIX_DRAM_EN ; Disable - bts eax, SYS_UC_LOCK_EN - _WRMSR - - ; Setup default values for Fixed-Sized MTRRs - ; Set 7FFFh-00000h as WB - mov ecx, AMD_AP_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR - - ; Set 9FFFFh-80000h also as WB - mov ecx, AMD_AP_MTRR_FIX16k_80000 - _WRMSR - - ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO - mov ecx, AMD_AP_MTRR_FIX16k_A0000 - xor eax, eax - xor edx, edx - _WRMSR - - ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO - xor eax, eax - xor edx, edx - mov ecx, AMD_AP_MTRR_FIX4k_C0000 - -CDLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_D8000 - jbe CDLoop - - ; Set FFFFFh-E0000h as Uncacheable Memory - mov eax, 18181818h - mov edx, eax - - mov ecx, AMD_AP_MTRR_FIX4k_E0000 - -EFLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_F8000 - jbe EFLoop - - ; If IBV provided settings for Fixed-Sized MTRRs, - ; overwrite the default settings. - .if ((esi != 0) && (esi != 0FFFFFFFFh)) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - ; While we are not at the end of the list - .while (ecx != CPU_LIST_TERMINAL) - ; Ensure that the MSR address is valid for Fixed-Sized MTRRs - .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \ - (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000)) - mov eax, dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData - mov edx, dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData - _WRMSR - .endif - add esi, sizeof (AP_MTRR_SETTINGS) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - .endw - .endif - - ; Enable fixed-range and variable-range MTRRs - mov ecx, AMD_MTRR_DEFTYPE - _RDMSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Enable Top-of-Memory setting - ; Enable use of RdMem/WrMem bits attributes - mov ecx, MTRR_SYS_CFG - _RDMSR - bts eax, MTRR_VAR_DRAM_EN ; Enable - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable - bts eax, MTRR_FIX_DRAM_EN ; Enable - _WRMSR - - mov esi, (1 SHL FLAG_IS_PRIMARY) - .else ; end if primary core - xor esi, esi - .endif - ; Make sure not to touch any Shared MSR from this point on - - AMD_DISABLE_STACK_FAMILY_HOOK - - bt esi, FLAG_IS_PRIMARY - .if (carry?) - ; restore variable MTRR6 and MTRR7 to default states - mov ecx, AMD_MTRR_VARIABLE_MASK7 ; clear MTRRPhysBase6 MTRRPhysMask6 - xor eax, eax ; and MTRRPhysBase7 MTRRPhysMask7 - xor edx, edx - .while (cx >= AMD_MTRR_VARIABLE_BASE6) - _WRMSR - dec cx - .endw - .endif - -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction - ret -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteHltInstruction -ExecuteHltInstruction PROC NEAR C - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC NmiHandler -NmiHandler PROC NEAR C - iretd -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC GetCsSelector -GetCsSelector PROC NEAR C, CsSelector:PTR - push ax - push ebx - - call FarCallGetCs - mov ebx, CsSelector - mov [ebx], ax - pop ebx - pop ax - ret -GetCsSelector ENDP - -;====================================================================== -; FarCallGetCs: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -FarCallGetCs PROC FAR PRIVATE - - mov ax, ss:[esp + 4] - retf - -FarCallGetCs ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -PUBLIC SetIdtr -SetIdtr PROC NEAR C USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - lidt fword ptr ss:[ebx] - ret -SetIdtr ENDP - -;====================================================================== -; GetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -PUBLIC GetIdtr -GetIdtr PROC NEAR C USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - sidt fword ptr ss:[ebx] - ret -GetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC ExecuteWbinvdInstruction -ExecuteWbinvdInstruction PROC NEAR C - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm deleted file mode 100644 index 9c6974e702..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm +++ /dev/null @@ -1,174 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; * @e \$Revision: 10071 $ @e \$Date: 2008-12-16 18:03:04 -0600 (Tue, 16 Dec 2008) $ -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - text SEGMENT - - -;====================================================================== -; ExecuteFinalHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteFinalHltInstruction PROC PUBLIC -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteHltInstruction PROC PUBLIC - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -NmiHandler PROC PUBLIC - iretq -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -GetCsSelector PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -GetCsSelector ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -SetIdtr PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -SetIdtr ENDP - -;====================================================================== -; GetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -GetIdtr PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -GetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -ExecuteWbinvdInstruction PROC PUBLIC - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm deleted file mode 100644 index 61656df3e7..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm +++ /dev/null @@ -1,497 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 443#$ $Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ -; Description: Main memory controller system configuration for AGESA -; -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;memUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written -; -; Out: -; -; All registers preserved. -;=============================================================================== -MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemUOutPort ENDP - - -;---------------------------------------------------------------------------- -; _SFENCE(); -; -_SFENCE macro - db 0Fh,0AEh,0F8h - endm - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemUWriteCachelines: -; Write a test pattern to DRAM -; -; In: Pattern - pointer to the write pattern -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - xor ecx, ecx - mov cx,ClCount - shl ecx,2 - @@: - db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemUWriteCachelines ENDP - -;=============================================================================== -;MemUReadCachelines: -; -; Read a pattern of 72 bit times (per DQ), to test dram functionality. The -;pattern is a stress pattern which exercises both ISI and crosstalk. The number -;of cache lines to fill is dependent on DCT width mode and burstlength. -; -; In: Buffer - pointer to a buffer where read data will be stored -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL Count:BYTE - pushad - ; First, issue continuous dummy reads to fill up the cache - mov eax,Address - .if (ClCount > 18) - mov cx,ClCount - shr cx,4 - mov Count,cl - .while (Count != 0) - push eax - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - pop eax - add eax,(16*64) ;Next 16CL - dec Count - .endw - .else - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - .if(ClCount == 1) - _MFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - .elseif(ClCount == 3) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - .elseif(ClCount == 6) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - .elseif(ClCount == 9) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - .elseif(ClCount == 18) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - mov eax,fs:[edx] ;TestAddr+16 cache lines - _MFENCE - mov eax,fs:[edx+64] ;TestAddr+17 cache lines - _MFENCE - .endif - .endif - _MFENCE - - ; Then, copy data to buffer - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - xor ecx, ecx - mov cx,ClCount - shl ecx,6 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemUReadCachelines ENDP - -;=============================================================================== -;MemUDummyCLRead: -; -; Perform a single cache line read from a given physical address. -; -; In: Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD - _SFENCE - pushad - mov eax,Address - mov dl,fs:[eax] - popad - ret -MemUDummyCLRead ENDP - -;=============================================================================== -;MemUFlushPattern: -; -; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used -;to ensure cache miss on the next read training. -; -; In: Address - Physical address to be flushed -; ClCount - number of cachelines to be flushed -; Out: -; -;All registers preserved. -;=============================================================================== -MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD - pushad - mov edi,Address - movzx ecx,ClCount - @@: - _MFENCE ; Force strong ordering of clflush - db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi] - _MFENCE - add edi,64 - loop @B - popad - ret -MemUFlushPattern ENDP - - -;=============================================================================== -;MemUGetWrLvNblErr: -; Read ClCount number of cachelines then return the bitmap that indicates -; the write leveling result of each byte lane. -; -; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result -; Address - Physical address to be sampled -; ClCount - number of cachelines to be read -; -; OUT: ErrBitmap - WL result -; -;All registers preserved -;=============================================================================== -MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL ZeroCount[32]:WORD - - pushad - mov esi,Address - _EXECFENCE - ;Cache fill - movzx ecx,ClCount - @@: - mov eax,fs:[esi] - add esi,64 - loop @B - _MFENCE - - ; Then, count the number of 0's - ;push es - ;push ss - ;pop es - lea edi,ZeroCount - mov cx,SIZEOF ZeroCount - mov al,0 - rep stosb - ;pop es - - mov esi,Address - lea edi,ZeroCount - mov cx,ClCount - shl cx,6 - .while(cx > 0) - mov al,fs:[esi] - test al,00Fh ;check lower nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - test al,0F0h ;check upper nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - inc esi - dec cx - test cx,07h - .if(ZERO?) - sub edi,(16*2) - sub cx,8 - add esi,8 - .endif - .endw - - ; Then, average and compress data to error bits - lea esi,ZeroCount - mov dx,ClCount - shl dx,1 - xor eax,eax - xor ecx,ecx - mov cl,0 - .while(cl<16) - .if(WORD PTR [esi] < dx) - bts eax,ecx - .endif - add esi,2 - inc cl - .endw - xor edx,edx - mov dx,WORD PTR ErrBitmap - mov [edx], ax - - popad - ret -MemUGetWrLvNblErr ENDP - -;=============================================================================== -;AlignPointerTo16Byte: -; Modifies BufferPtr to be 16 byte aligned -; -; In: BufferPtrPtr - Pointer to buffer pointer -; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned -; -;All registers preserved. -;=============================================================================== -AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD - push edx - push eax - mov edx, BufferPtrPtr - mov eax, [edx] - add eax, 16 - and ax, 0FFF0h - mov [edx], eax - pop eax - pop edx - ret -AlignPointerTo16Byte ENDP - -;=============================================================================== -;MemUMFenceInstr: -; Serialize instruction -; -; In: -; Out: -; -;All registers preserved. -;=============================================================================== -MemUMFenceInstr PROC CALLCONV PUBLIC - _MFENCE - ret -MemUMFenceInstr ENDP - - END - diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm deleted file mode 100644 index 5520d8eafa..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm +++ /dev/null @@ -1,187 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 443#$ $Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ -; Description: Main memory controller system configuration for AGESA DDR 2 -; -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;MemRecUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written to port -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemRecUOutPort ENDP - - - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemRecUWrite1CL: -; -; Write data from buffer to a system address -; -; In: Address - System address to read from -; Pattern - pointer pattern. -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUWrite1CL PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - mov ecx,4 - @@: - db 66h,0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h,66h,0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemRecUWrite1CL ENDP - -;=============================================================================== -;MemRecURead1CL: -; -; Read one cacheline to buffer -; -; In: Buffer - pointer buffer. -; : Address - System address to read from -; -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecURead1CL PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD - - pushad - - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - mov ecx,64 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemRecURead1CL ENDP - - -;=============================================================================== -;MemRecUFlushPattern: -; -; Flush one cache line -; -; In: Address - System address [31:0] -; Out: -; -;All registers preserved except for "Out:" -;=============================================================================== -MemRecUFlushPattern PROC CALLCONV PUBLIC Address:DWORD - pushad - mov eax,Address - _EXECFENCE - ;clflush fs:[eax] - db 064h ;access relative to FS BASE prefix - db 00Fh ;opcode - db 0AEh ;opcode - db 038h ;eax indirect addressing - _MFENCE - popad - ret -MemRecUFlushPattern ENDP - - - - END - diff --git a/src/vendorcode/amd/agesa/f15/cpcarmac.inc b/src/vendorcode/amd/agesa/f15/cpcarmac.inc deleted file mode 100644 index 8947491717..0000000000 --- a/src/vendorcode/amd/agesa/f15/cpcarmac.inc +++ /dev/null @@ -1,457 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: cpcarmac.inc $Revision:: 50472 $ $Date:: 2011-04-11 01:57:56 -0600 (Mon, 11 Apr 2011) $ -; -; Description: Code to setup and break down cache-as-stack -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE cpcar.inc - .LIST - .586P - .mmx - -;====================================================================== -; AMD_ENABLE_STACK: Setup a stack -; -; In: -; EBX = Return address (preserved) -; -; Out: -; SS:ESP - Our new private stack location -; -; EAX = AGESA_STATUS -; EDX = Return status code if EAX contains a return code of higher -; severity than AGESA_SUCCESS -; ECX = Stack size in bytes -; -; Requirements: -; * This routine presently is limited to a max of 64 processor cores -; Preserved: -; ebx ebp -; Destroyed: -; eax, ecx, edx, edi, esi, ds, es, ss, esp -; mmx0, mmx1, mmx5 -; -; Description: -; Fixed MTRR address allocation to cores: -; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. -; There is a max of 1 BSP, 7 core0s and 56 other cores. -; Although each core has it's own cache storage, they share the address space. Each core must -; be assigned a private and unique address space for its stack. To support legacy systems, -; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved -; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) -; -; 80000h 40000h 00000h -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; 64K | | | | | | | | | 64K ea -; ea +----------+----------+----------+----------+----------+----------+----------+----------+ -; | MTRR 0000_0250 MTRRfix64K_00000 | -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node -; |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; -; C0000h B0000h A0000h 90000h 80000h -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -;16K | | | | | | | | | | | | | | | | | -; ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node -; | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; -; E0000h D0000h C0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; -; 100000h F0000h E0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -;====================================================================== -AMD_ENABLE_STACK MACRO - local AmdEnableStackExit - -; Note that SS:ESP will be default stack. Note that this stack -; routine will not be used after memory has been initialized. Because -; of its limited lifetime, it will not conflict with typical PCI devices. - movd mm0, ebx ; Put return address in a safe place - movd mm1, ebp ; Save some other user registers - - ; get node id and core id of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - ; Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established - - ; If we detected an unknown processor family or core combination, return AGESA_FATAL. - .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY)) - mov edx, CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .elseif (esi & (1 SHL FLAG_CORE_NOT_IDENTIFIED)) - mov edx, CPU_EVENT_CORE_NOT_IDENTIFIED - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .endif - - ; determine if stack is already enabled. We are using the DefType MSR for this determination. - ; It is =0 after reset; CAR setup sets it to enable the MTRRs - mov eax, cr0 ; Is cache enabled? (CD or NW bit set) - CR0_MASK TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW)) - .if (!(eax & CR0_MASK)) - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) - MSR_MASK TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN)) - .if (eax & MSR_MASK) - bts esi, FLAG_STACK_REENTRY ; indicate stack has already been initialized - .endif - .endif - - ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM - mov ebx, esi ; Get my Node/Core info - xor bl, bl - shl bh, 3 ; Isolate my node#, match alignment for PCI Dev# - mov eax, 8000C144h ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit - add ah, bh - mov ebx, eax ; Save PCI address for Base/Limit pair - - mov dx, 0CF8h - out dx, eax - add dx, 4 - xor eax, eax ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) - out dx, eax ; DRAM Limit = node0, no interleave - - mov eax, ebx - sub eax, 4 ; Now point to the Base register - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 00000003h ; Set the read and write enable bits - out dx, eax ; DRAM Base = 0x0000, R/W - - AMD_ENABLE_STACK_FAMILY_HOOK - - ; Init CPU MSRs for our init routines - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Turn on modification enable bit - _WRMSR - - mov eax, esi - bt eax, FLAG_STACK_REENTRY ; Is this a 2nd entry? - .if (!carry?) ; On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP - bt eax, FLAG_IS_PRIMARY ; Is this core the primary in a compute unit? - .if (carry?) ; Families using shared groups do not need to clear the MTRRs since that is done at power-on reset - ; Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores - ; Clear all variable and Fixed MTRRs for non-shared cores - mov ecx, AMD_MTRR_VARIABLE_BASE0 - xor eax, eax - xor edx, edx - .while (cl != 10h) ; Variable MTRRphysBase[n] and MTRRphysMask[n] - _WRMSR - inc cl - .endw - mov cx, AMD_MTRR_FIX64k_00000 ; MSR:0000_0250 - _WRMSR - mov cx, AMD_MTRR_FIX16k_80000 ; MSR:0000_0258 - _WRMSR - mov cx, AMD_MTRR_FIX16k_A0000 ; MSR:0000_0259 - _WRMSR - mov cx, AMD_MTRR_FIX4k_C0000 ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 - .while (cl != 70h) - _WRMSR - inc cl - .endw - - ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. - ; - not strictly needed since the FixedMTRRs take presedence. - mov eax, (16 * 1024 * 1024) - mov ecx, TOP_MEM ; MSR:C001_001A - _WRMSR - .endif ; End Is_Primary - .endif ; End Stack_ReEntry - - ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores - xor eax, eax - xor edx, edx - mov ecx, IORR_BASE ; MSR:C001_0016 - 0019 - .while (cl != 1Ah) - _WRMSR - inc cl - .endw - mov ecx, TOP_MEM2 ; MSR:C001_001D - _WRMSR - - ; setup MTRRs for stacks - ; A speculative read can be generated by a speculative fetch mis-aligned in a code zone - ; or due to a data zone being interpreted as code. When a speculative read occurs outside a - ; controlled region (intentionally used by software), it could cause an unwanted cache eviction. - ; To prevent speculative reads from causing an eviction, the unused cache ranges are set - ; to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. - ; Note: some core stack regions will share an MTRR since the control granularity is much - ; larger than the allocated stack zone. The allocation algorithm must account for this 'extra' - ; space covered by the MTRR when parseling out cache space for the various uses. In some cases - ; this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c - ; - ; Outcome of this block is that: (Note the MTRR map at the top of the file) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) - ; - - mov eax, esi ; Load Flags, node, core - .if (al == 0) ; Is a core 0? - .if (ah == 0) ; Is Node 0? (BSP) - ; Is BSP, assign a 64K stack; for F10/F12, foce to a 32K stack - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_64K / 1000h)) - bt eax, FLAG_FORCE_32K_STACK - .if (carry?) - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_32K / 1000h)) - .endif - mov ebp, BSP_STACK_BASE_ADDR - .else ; node 1 to 7, core0 - ; Is a Core0 of secondary node, assign 16K stacks - mov bx, AMD_MTRR_FIX16k_80000 - shl ebx, 16 ; - mov bh, ah ; Node# is used as slot# - mov bl, (CORE0_STACK_SIZE / 1000h) - mov al, ah ; Base = (Node# * Size); - mul bl ; - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE0_STACK_BASE_ADDR - mov ebp, eax - .endif - .else ;core 1 thru core 7 - ; Is core 1-7 of any node, assign 4K stacks - mov al, 8 ; CoreIndex = ( (Node# * 8) ... - mul ah ; - mov bx, si ; - add al, bl ; ... + Core#); - - mov bx, AMD_MTRR_FIX64k_00000 - shl ebx, 16 ; - mov bh, al ; Slot# = (CoreIndex / 16) + 4; - shr bh, 4 ; - add bh, 4 ; - mov bl, (CORE1_STACK_SIZE / 1000h) - - mul bl ; Base = ( (CoreIndex * Size) ... - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE1_STACK_BASE_ADDR ; ... + Base_Addr); - mov ebp, eax - .endif - - ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR) - mov edi, WB_DRAM_TYPE ; Load Cache type in 1st slot - mov cl, bh ; ShiftCount = ((slot# ... - and cl, 03h ; ... % 4) ... - shl cl, 3 ; ... * 8); - shl edi, cl ; Cache type is now in correct position - ror ebx, 16 ; Get the MTRR address - movzx ecx, bx ; - rol ebx, 16 ; Put slot# & size back in BX - _RDMSR ; Read-modify-write the MSR - .if (bh < 4) ; Is value in lower or upper half of MSR? - or eax, edi ; - .else ; - or edx, edi ; - .endif ; - _WRMSR ; - - ; Enable MTRR defaults as UC type - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Read-modify-write the MSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Close the modification window on the Fixed MTRRs - mov ecx, MTRR_SYS_CFG ; MSR:0C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_EN ; MtrrFixDramEn - bts eax, MTRR_VAR_DRAM_EN ; variable MTRR enable bit - btr eax, MTRR_FIX_DRAM_MOD_EN ; Turn off modification enable bit - _WRMSR - - ; Enable caching in CR0 - mov eax, CR0 ; Enable WT/WB cache - btr eax, CR0_PG ; Make sure paging is disabled - btr eax, CR0_CD ; Clear CR0 NW and CD - btr eax, CR0_NW - mov CR0, eax - - ; Use the Stack Base & size to calculate SS and ESP values - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; - mov esp, ebp ; Initialize the stack pointer - mov edi, esp ; Copy the stack start to edi - movzx bx, bl - movzx ebx, bx ; Clear upper ebx, don't need MSR addr anymore - shl ebx, 12 ; Make size full byte count (* 4K) - add esp, ebx ; Set the Stack Pointer as full linear address - sub esp, 4 - ; - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - 32b start address of stack block - ; ebx - size of stack block - ; esp - 32b linear stack pointer - ; - - ; Determine mode for SS base; - mov ecx, CR0 ; Check for 32-bit protect mode - bt ecx, CR0_PE ; - .if (!carry?) ; PE=0 means real mode - mov cx, cs ; - .if (cx >= 0D000h) ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000 - ; alter SS:ESP for 16b Real Mode: - mov eax, edi ; - shr eax, 4 ; Create a Real Mode segment for ss, ds, es - mov ss, ax ; - mov ds, ax ; - mov es, ax ; - shl eax, 4 ; - sub edi, eax ; Adjust the clearing pointer for Seg:Offset mode - mov esp, ebx ; Make SP an offset from SS - sub esp, 4 ; - .endif ; endif - ; else - ; Default is to use Protected 32b Mode - .endif - ; - ; Clear The Stack - ; Now that we have set the location and the MTRRs, initialize the cache by - ; reading then writing to zero all of the stack area. - ; review: - ; ss - Stack base - ; esp - stack pointer - ; ebx - size of stack block - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - address of start of stack block - ; - shr ebx, 2 ; - mov cx, bx ; set cx for size count of DWORDS - ; Check our flags - Don't clear an existing stack - .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) ) - cld - mov esi, edi - rep lods DWORD PTR [esi] ; Pre-load the range - xor eax, eax - mov cx, bx - mov esi, edi ; Preserve base for push on stack - rep stos DWORD PTR [edi] ; Clear the range - mov DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword - shl ebx, 2 ; Put stack size and base - push ebx ; in top of stack - push esi - - mov ecx, ebx ; Return size of stack in bytes - mov eax, AGESA_SUCCESS ; eax = AGESA_SUCCESS : no error return code - .else - movzx ecx, cx - shl ecx, 2 ; Return size of stack, in bytes - mov edx, CPU_EVENT_STACK_REENTRY - mov eax, AGESA_WARNING ; eax = AGESA_WARNING (Stack has already been set up) - .endif - -AmdEnableStackExit: - movd ebx, mm0 ; Restore return address - movd ebp, mm1 -ENDM - -;====================================================================== -; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -; should only be executed on the BSP -; -; In: -; none -; -; Out: -; EAX = AGESA_SUCCESS -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, esp, mmx5 -;====================================================================== -AMD_DISABLE_STACK MACRO - - mov esp, ebx ; Save return address - - ; get node/core/flags of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - - ; Turn on modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable modifications - _WRMSR - - ; Set lower 640K MTRRs for Write-Back memory caching - mov ecx, AMD_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR ; 0 - 512K = WB Mem - mov ecx, AMD_MTRR_FIX16k_80000 - _WRMSR ; 512K - 640K = WB Mem - - ; Turn off modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable modification - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable 'normal' cache operations - - mov ebx, esp ; restore return address (ebx) - xor eax, eax - -ENDM diff --git a/src/vendorcode/amd/agesa/f15tn/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f15tn/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index 0f32cc6397..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,688 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -DDR2133 EQU ( 1 SHL (DDR2133_FREQUENCY / 66)) -DDR2400 EQU ( 1 SHL (DDR2400_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -LR_DIMM0 EQU 0001h -LR_DIMM1 EQU 0010h -LR_DIMM2 EQU 0100h -LR_DIMM3 EQU 1000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; < -; < CS POPULATION MASKS -; -CS_ANY_ EQU 0FFh -CS0_ EQU 01h -CS1_ EQU 02h -CS2_ EQU 04h -CS3_ EQU 08h -CS4_ EQU 10h -CS5_ EQU 20h -CS6_ EQU 40h -CS7_ EQU 80h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; -; DIMM VOLTAGE MASK -; -VOLT_ANY_ EQU 0FFh -VOLT1_5_ EQU 01h -VOLT1_35_ EQU 02h -VOLT1_25_ EQU 04h -; -; NOT APPLICIABLE -; -NA_ EQU 00h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed -PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs -PSO_SOLDERED_DOWN_SODIMM_TYPE EQU 15 ; < Soldered down SODIMM type -PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V -PSO_MIN_RD_WR_DATAEYE_WIDTH EQU 17 ; < Min RD/WR dataeye width -PSO_CPU_FAMILY_TO_OVERRIDE EQU 18 ; < CPU family signature to tell following PSO macros are CPU family dependent -PSO_MAX_SOLDERED_DOWN_DIMMS EQU 19 ; < Max Soldered-down Dimms per channel -PSO_MEMORY_POWER_POLICY EQU 20 ; < Memory power policy override -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ********************************** -; * TABLE DRIVEN PSO SPECIFIC ENTRIES -; ********************************** -; Condition descriptor -PSO_TBLDRV_CONFIG EQU 200 ; < Configuration Descriptor - -; Overriding entry types -PSO_TBLDRV_START EQU 210 ; < Start of Table Driven Overriding Entry Types -PSO_TBLDRV_SPEEDLIMIT EQU 210 ; < Speed Limit -PSO_TBLDRV_ODT_RTTNOM EQU 211 ; < RttNom -PSO_TBLDRV_ODT_RTTWR EQU 212 ; < RttWr -PSO_TBLDRV_ODTPATTERN EQU 213 ; < Odt Patterns -PSO_TBLDRV_ADDRTMG EQU 214 ; < Address/Timing values -PSO_TBLDRV_ODCCTRL EQU 215 ; < ODC Control values -PSO_TBLDRV_SLOWACCMODE EQU 216 ; < Slow Access Mode -PSO_TBLDRV_MR0_CL EQU 217 ; < MR0[CL] -PSO_TBLDRV_MR0_WR EQU 218 ; < MR0[WR] -PSO_TBLDRV_RC2_IBT EQU 219 ; < RC2[IBT] -PSO_TBLDRV_RC10_OPSPEED EQU 220 ; < RC10[Opearting Speed] -PSO_TBLDRV_LRDIMM_IBT EQU 221 ; < LrDIMM IBT -;del PSO_TBLDRV_2D_TRAINING EQU 222 ; < 2D training -PSO_TBLDRV_INVALID_TYPE EQU 223 ; < Invalid Type -PSO_TBLDRV_END EQU 223 ; < End of Table Driven Overriding Entry Types - - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CPU_FAMILY_TO_OVERRIDE MACRO CpuFamilyRevision:REQ - DB PSO_CPU_FAMILY_TO_OVERRIDE - DB 4 - DD CpuFamilyRevision -ENDM - -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 7 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfSolderedDownDimmsPerChannel:REQ - DB PSO_MAX_SOLDERED_DOWN_DIMMS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfSolderedDownDimmsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 4 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 7 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 12 - DB SocketID - DB ChannelID - DB DimmID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID: REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_RXEN_SEED - DB 21 - DB SocketID - DB ChannelID - DB DimmID - DW Byte0Seed - DW Byte1Seed - DW Byte2Seed - DW Byte3Seed - DW Byte4Seed - DW Byte5Seed - DW Byte6Seed - DW Byte7Seed - DW ByteEccSeed -ENDM - -NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ - DB PSO_NO_LRDIMM_CS67_ROUTING - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -SOLDERED_DOWN_SODIMM_TYPE MACRO SocketID:REQ, ChannelID:REQ - DB PSO_SOLDERED_DOWN_SODIMM_TYPE - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO - DB PSO_LVDIMM_VOLT1_5_SUPPORT - DB 4 - DB ANY_SOCKET - DB ANY_CHANNEL - DB ALL_DIMMS - DB 1 -ENDM - -MIN_RD_WR_DATAEYE_WIDTH MACRO SocketID:REQ, ChannelID:REQ, MinRdDataeyeWidth:REQ, MinWrDataeyeWidth:REQ - DB PSO_MIN_RD_WR_DATAEYE_WIDTH - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB MinRdDataeyeWidth - DB MinWrDataeyeWidth -ENDM - -MEMORY_POWER_POLICY_OVERRIDE MACRO PowerPolicy:REQ - DB PSO_MEMORY_POWER_POLICY - DB 4 - DB ANY_SOCKET - DB ANY_CHANNEL - DB ALL_DIMMS - DB PowerPolicy -ENDM -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -; ***************************************************************************************** -; * -; * TABLE DRIVEN OVERRIDE MACROS -; * -; ***************************************************************************************** -; Configuration sub-descriptors -CONFIG_GENERAL EQU 0 -CONFIG_SPEEDLIMIT EQU 1 -CONFIG_RC2IBT EQU 2 -CONFIG_DONT_CARE EQU 3 -Config_Type TEXTEQU <DWORD> -; -; Configuration Macros -; -TBLDRV_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ - DB PSO_TBLDRV_CONFIG - DB 9 - DB CONFIG_GENERAL - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig -ENDM - -TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Dimms:REQ, NumOfSR:REQ, NumOfDR:REQ, NumOfQR:REQ, NumOfLRDimm:REQ - DB PSO_TBLDRV_CONFIG - DB 7 - DB CONFIG_SPEEDLIMIT - DB DimmPerCH - DB Dimms - DB NumOfSR - DB NumOfDR - DB NumOfQR - DB NumOfLRDimm -ENDM - -TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ, NumOfReg:REQ - DB PSO_TBLDRV_CONFIG - DB 10 - DB CONFIG_RC2IBT - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig - DB NumOfReg -ENDM -; -; Overriding Macros -; -TBLDRV_CONFIG_ENTRY_SPEEDLIMIT MACRO SpeedLimit1_5:REQ, SpeedLimit1_35:REQ, SpeedLimit1_25:REQ - DB PSO_TBLDRV_SPEEDLIMIT - DB 6 - DW SpeedLimit1_5 - DW SpeedLimit1_35 - DW SpeedLimit1_25 -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTNOM MACRO TgtCS:REQ, RttNom:REQ - DB PSO_TBLDRV_ODT_RTTNOM - DB 2 - DB TgtCS - DB RttNom -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTWR MACRO TgtCS:REQ, RttWr:REQ - DB PSO_TBLDRV_ODT_RTTWR - DB 2 - DB TgtCS - DB RttWr -ENDM - -TBLDRV_CONFIG_ENTRY_ODTPATTERN MACRO RdODTCSHigh:REQ, RdODTCSLow:REQ, WrODTCSHigh:REQ, WrODTCSLow:REQ - DB PSO_TBLDRV_ODTPATTERN - DB 16 - DD RdODTCSHigh - DD RdODTCSLow - DD WrODTCSHigh - DD WrODTCSLow -ENDM - -TBLDRV_CONFIG_ENTRY_ADDRTMG MACRO AddrTmg:REQ - DB PSO_TBLDRV_ADDRTMG - DB 4 - DD AddrTmg -ENDM - -TBLDRV_CONFIG_ENTRY_ODCCTRL MACRO OdcCtrl:REQ - DB PSO_TBLDRV_ODCCTRL - DB 4 - DD OdcCtrl -ENDM - -TBLDRV_CONFIG_ENTRY_SLOWACCMODE MACRO SlowAccMode:REQ - DB PSO_TBLDRV_SLOWACCMODE - DB 1 - DB SlowAccMode -ENDM - -TBLDRV_CONFIG_ENTRY_RC2_IBT MACRO TgtDimm:REQ, IBT:REQ - DB PSO_TBLDRV_RC2_IBT - DB 2 - DB TgtDimm - DB IBT -ENDM - -TBLDRV_OVERRIDE_MR0_CL MACRO RegValOfTcl:REQ, MR0CL13:REQ, MR0CL0:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_CL - DB 3 - DB RegValOfTcl - DB MR0CL13 - DB MR0CL0 -ENDM - -TBLDRV_OVERRIDE_MR0_WR MACRO RegValOfTwr:REQ, MR0WR:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_WR - DB 2 - DB RegValOfTcl - DB MR0WR -ENDM - -TBLDRV_OVERRIDE_RC10_OPSPEED MACRO Frequency:REQ, MR10OPSPEED:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_RC10_OPSPEED - DB 5 - DD Frequency - DB MR10OPSPEED -ENDM - -TBLDRV_CONFIG_ENTRY_LRDMM_IBT MACRO F0RC8:REQ, F1RC0:REQ, F1RC1:REQ, F1RC2:REQ - DB PSO_TBLDRV_LRDIMM_IBT - DB 4 - DB F0RC8 - DB F1RC0 - DB F1RC1 - DB F1RC2 -ENDM - -;del TBLDRV_CONFIG_ENTRY_2D_TRAINING MACRO Training2dMode:REQ -;del DB PSO_TBLDRV_2D_TRAINING -;del DB 1 -;del DB Training2dMode -;del ENDM - -; -; Macros for removing entries -; -INVALID_CONFIG_FLAG EQU 8000h - -TBLDRV_INVALID_CONFIG MACRO - DB PSO_TBLDRV_INVALID_TYPE - DB 0 -ENDM -; ***************************************************************************************** -; * -; * END OF TABLE DRIVEN OVERRIDE MACROS -; * -; ***************************************************************************************** diff --git a/src/vendorcode/amd/agesa/f15tn/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f15tn/Legacy/Proc/arch2008.asm deleted file mode 100644 index a7be499a87..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2675 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 63425 $ $Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - .mmx - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN UINT32 C1ePlatformData1; -; IN UINT32 C1ePlatformData2; -; IN UINT32 C1ePlatformData3; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN UseAtmMode; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> -;del sOemCallout <AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE, OFFSET my2DTrainVrefChange> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f15tn/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f15tn/Legacy/agesa.inc deleted file mode 100644 index be8ccf3d4f..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Legacy/agesa.inc +++ /dev/null @@ -1,3089 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 64574 $ @e \$Date: 2012-01-25 01:01:51 -0600 (Wed, 25 Jan 2012) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h -;del AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE EQU 00028146h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h - AGESA_GNB_GFX_GET_VBIOS_IMAGE EQU 00028302h - - ; AGESA FCH CALLOUTS - AGESA_FCH_OEM_CALLOUT EQU 00028401h - -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - - -;----------------------------------------------------------------------------- -; FCH DEFINITIONS AND MACROS -; -;----------------------------------------------------------------------------- - -; Configuration values for SdConfig - SdDisable EQU 0 ; Disabled - SdAmda EQU 1 ; AMDA, set 24,18,16, default - SdDma EQU 2 ; DMA clear 24, 16, set 18 - SdPio EQU 3 ; PIO clear 24,18,16 -SD_MODE TEXTEQU <DWORD> - -; Configuration values for SdClockControl - Sd50MhzTraceCableLengthWithinSixInches EQU 4 ; 50Mhz, default - Sd40MhzTraceCableLengthSix2ElevenInches EQU 6 ; 40Mhz - Sd25MhzTraceCableLengthEleven2TwentyfourInches EQU 7 ; 25Mhz -SD_CLOCK_CONTROL TEXTEQU <DWORD> - -;del ; Configuration values for AzaliaController -;del AzAuto EQU 0 ; Auto - Detect Azalia controller automatically -;del AzDisable EQU 1 ; Diable - Disable Azalia controller -;del AzEnable EQU 2 ; Enable - Enable Azalia controller -HDA_CONFIG TEXTEQU <DWORD> - -; Configuration values for IrConfig - IrDisable EQU 0 ; Disable - IrRxTx0 EQU 1 ; Rx and Tx0 - IrRxTx1 EQU 2 ; Rx and Tx1 - IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1 -IR_CONFIG TEXTEQU <DWORD> - -; Configuration values for SataClass - SataNativeIde EQU 0 ; Native IDE mode - SataRaid EQU 1 ; RAID mode - SataAhci EQU 2 ; AHCI mode - SataLegacyIde EQU 3 ; Legacy IDE mode - SataIde2Ahci EQU 4 ; IDE->AHCI mode - SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver) - SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver) -SATA_CLASS TEXTEQU <DWORD> - -; Configuration values for GppLinkConfig - PortA4 EQU 0 ; 4:0:0:0 - PortA2B2 EQU 2 ; 2:2:0:0 - PortA2B1C1 EQU 3 ; 2:1:1:0 - PortA1B1C1D1 EQU 4 ; 1:1:1:1 -GPP_LINKMODE TEXTEQU <DWORD> - -; Configuration values for FchPowerFail - AlwaysOff EQU 0 ; Always power off after power resumes - AlwaysOn EQU 1 ; Always power on after power resumes - UsePrevious EQU 3 ; Resume to same setting when power fails -POWER_FAIL TEXTEQU <DWORD> - -; Configuration values for SATA Link Speed - Gen1 EQU 1 ; SATA port GEN1 speed - Gen2 EQU 2 ; SATA port GEN2 speed - Gen3 EQU 3 ; SATA port GEN3 speed -SATA_SPEED TEXTEQU <DWORD> - -; Configuration values for GPIO function - Function0 EQU 0 ; GPIO Function 1 - Function1 EQU 1 ; GPIO Function 1 - Function2 EQU 2 ; GPIO Function 2 - Function3 EQU 3 ; GPIO Function 3 -GPIO_FUN TEXTEQU <DWORD> - -; Configuration values for GPIO_CFG - OwnedByEc EQU 1 ; This bit can only be written by EC - OwnedByHost EQU 2 ; This bit can only be written by host (BIOS) - Sticky EQU 4 ; If set, [6:3] are sticky - PullUpB EQU 8 ; 0: Pullup enable; 1: Pullup disabled - PullDown EQU 16 ; 0: Pulldown disabled; 1: Pulldown enable - GpioOutEnB EQU 32 ; 0: Output enable; 1: Output disable - GpioOut EQU 64 ; Output state when GpioOutEnB is 0 - GpioIn EQU 128 ; This bit is read only - current pin state -CFG_BYTE TEXTEQU <DWORD> - -; FCH GPIO CONTROL -GPIO_CONTROL STRUCT - GpioPin UINT8 ? ; Gpio Pin, valid range: 0-67, 128-150, 160-228 - PinFunction GPIO_FUN ? ; Multi-function selection - CfgByte CFG_BYTE ? ; GPIO Register value -GPIO_CONTROL ENDS - -; FCH SCI MAP CONTROL -SCI_MAP_CONTROL STRUCT - InputPin UINT8 ? ; Input Pin, valid range 0-63 - GpeMap UINT8 ? ; Gpe Map, valid range 0-31 -SCI_MAP_CONTROL ENDS - -; FCH SATA PHY CONTROL -SATA_PHY_CONTROL STRUCT - CommonPhy BOOLEAN ? ; Common PHY or not - Gen SATA_SPEED ? ; SATA speed - Port UINT8 ? ; Port number, valid range: 0-7 - PhyData UINT32 ? ; SATA PHY data, valid range: 0-0xFFFFFFFF -SATA_PHY_CONTROL ENDS - -; -; FCH Component Data Structure in InitReset stage -; -FCH_RESET_INTERFACE STRUCT - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - - Xhci0Enable BOOLEAN ? ; XHCI0 controller function - ; FALSE - XHCI0 controller disabled - ; TRUE - XHCI0 controller enabled - - Xhci1Enable BOOLEAN ? ; XHCI1 controller function - ; FALSE - XHCI1 controller disabled - ; TRUE - XHCI1 controller enabled - -FCH_RESET_INTERFACE ENDS - - -; -; FCH Component Data Structure from InitEnv stage -; -FCH_INTERFACE STRUCT - SdConfig SD_MODE ? ; Secure Digital (SD) controller mode -;del AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller - IrConfig IR_CONFIG ? ; Infrared (IR) Configuration - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - SataClass SATA_CLASS ? ; SATA controller mode - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller - ; FALSE - Legacy IDE mode - ; TRUE - Native IDE mode - Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function - ; FALSE - OHCI1 is disabled - ; TRUE - OHCI1 is enabled - Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function - ; FALSE - OHCI2 is disabled - ; TRUE - OHCI2 is enabled - Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function - ; FALSE - OHCI3 is disabled - ; TRUE - OHCI3 is enabled - Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function - ; FALSE - OHCI4 is disabled - ; TRUE - OHCI4 is enabled - XhciSwitch BOOLEAN ? ; XHCI controller Function - ; FALSE - XHCI is disabled - ; TRUE - XHCI is enabled - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - FchPowerFail POWER_FAIL ? ; FCH power failure option -FCH_INTERFACE ENDS - - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the - ; < currently installed processor - C1eModeHardware EQU 2 ; < Hardware method - C1eModeMsgBased EQU 3 ; < Message-based method - C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE - LOW_POWER_PSTATE_FOR_PROCHOT_AUTO EQU 0 ; < Auto - LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE EQU 1 ; < Disabled - MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU <DWORD> - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h -DESCRIPTOR_IGNORE EQU 40000000h - -; PCIe link initialization - -EndpointDetect EQU 0 ;Detect endpoint presence -EndpointNotPresent EQU 1 ;Endpoint not present (or connected). Used in case there is alternative way to determine - ;if device present on board or in slot. For example GPIO can be used to determine device presence. -PCIE_ENDPOINT_STATUS TEXTEQU <DWORD> - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -APIC_DEVICE_INFO STRUCT - GroupMap UINT8 ? ; < Group mapping for slot or endpoint device (connected to PCIE port) interrupts . - ; 0 - IGNORE THIS STRUCTURE and use recommended settings - ; 1 - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) - ; 2 - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) - ; ... - ; 8 - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) - Swizzle UINT8 ? ;< Swizzle interrupt in the Group. - ; 0 - ABCD - ; 1 - BCDA - ; 2 - CDAB - ; 3 - DABC - BridgeInt UINT8 ? ; < IOAPIC redirection table entry for PCIE bridge interrupt - ; 0 - Entry 0 of IO APIC redirection table - ; 1 - Entry 1 of IO APIC redirection table - ; ... - ; 31 - Entry 31 of IO APIC redirection table -APIC_DEVICE_INFO ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls - ApicDeviceInfo APIC_DEVICE_INFO {} ; < IOAPIC device programming info - EndpointStatus PCIE_ENDPOINT_STATUS ? ; < PCIe endpoint status -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port - ; 0 - Do not invert (default) - ; 1 - Invert P and N on this lane - Flags UINT8 ? ; < Capabilities flags - ; Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 - ; Flags bit[7:1] Reserved - ; -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - -GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST EQU 001h - -; VBIOS image info -GFX_VBIOS_IMAGE_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard configuration header - ImagePtr POINTER ? ; < Pointer to VBIOS image - GfxPciAddress PCI_ADDR {} ; < PCI address of integrated graphics controller - Flags UINT32 ? ; < BIT[0] - special repost requred -GFX_VBIOS_IMAGE_INFO ENDS - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - PcieGen3 EQU 3 - MaxPcieGen EQU 4 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeEDPToLvds EQU 11 - ConnectorTypeEDPToRealtecLvds EQU 12 - ConnectorTypeAutoDetect EQU 13 - MaxConnectorType EQU 14 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - -;PCIe_DDI_DATA.Flags definitions -DDI_DATA_FLAGS_DP1_1_ONLY EQU 01h ; < BIT[0] Selects downgrade PHY link to DP1.1 - -;IOMMU requestor ID -IOMMU_REQUESTOR_ID STRUCT - Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number -IOMMU_REQUESTOR_ID ENDS - -;IVMD exclusion range descriptor -IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT - Flags UINT32 ? ; Descriptor flags - ; @li @b Flags[31] - Terminate descriptor array. - ; @li @b Flags[30] - Ignore descriptor. - RequestorIdStart IOMMU_REQUESTOR_ID {} ; Requestor ID start - RequestorIdEnd IOMMU_REQUESTOR_ID {} ; Requestor ID end (use same as start for single ID) - RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range - RangeLength UINT64 ? ; Length of exclusion range in bytes -IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; LVDS Misc Control Field -LVDS_MISC_CONTROL_FIELD STRUCT - FpdiMode UINT8 ? - ;IN UINT8 FpdiMode:1; - ;IN UINT8 DlChSwap:1; - ;IN UINT8 VsyncActiveLow:1; - ;IN UINT8 HsyncActiveLow:1; - ;IN UINT8 BLONActiveLow:1; - ;IN UINT8 TravisLvdsVolOverwriteEn:1; - ;IN UINT8 Reserved:2; -LVDS_MISC_CONTROL_FIELD ENDS - -; LVDS Misc Control -LVDS_MISC_CONTROL UNION - Field LVDS_MISC_CONTROL_FIELD {} - Value UINT8 ? -LVDS_MISC_CONTROL ENDS - -; Display Misc Control Field -DISPLAY_MISC_CONTROL_FIELD STRUCT - Reserved1 UINT8 ? - ;IN UINT8 Reserved1:3; - ;IN UINT8 VbiosFastBootEn:1; - ;IN UINT8 Reserved2:4; -DISPLAY_MISC_CONTROL_FIELD ENDS - -; Display Misc Control -DISPLAY_MISC_CONTROL UNION - Field DISPLAY_MISC_CONTROL_FIELD {} - Value UINT8 ? -DISPLAY_MISC_CONTROL ENDS - -; Configuration settings for GNB. -GNB_POST_CONFIGURATION STRUCT - IgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy - ; @li 0 = Auto - use existing default - - ; @li 1 = Disable iGPU if any PCIe/PCI graphics card present -GNB_POST_CONFIGURATION ENDS - - IGPU_DISABLE_AUTO EQU 0 ; Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics - IGPU_DISABLE_ANY_PCIE EQU 1 ; Disable iGPU if any PCI or PCIE graphics card is present - - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - IommuSupport BOOLEAN ? ; IOMMU support. - ; TRUE = Disable and hide IOMMU device. - ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table. - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported. - LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings. - Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode. - LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - GnbRemoteDisplaySupport BOOLEAN ? ; This item enables Wireless Display Support - LvdsMiscVoltAdjustment UINT8 ? ; Travis register LVDS_CTRL_4 to adjust LVDS output voltage - DisplayMiscControl DISPLAY_MISC_CONTROL {} ; This item configures display misc control -GNB_ENV_CONFIGURATION ENDS - -; Configuration settings for GNB. -GNB_MID_CONFIGURATION STRUCT - iGpuVgaMode UINT8 ? ; < VGA resourses decoding configuration for iGPU - ; < @li 0 = iGPU decode all VGA resourses (must be promary VGA adapter) - ; < @li 1 = iGPU will not decode any VGA resourses (must be secondary graphics adapter) -GNB_MID_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - DDR2100_FREQUENCY EQU 1050 ; < DDR 2100 - DDR2133_FREQUENCY EQU 1066 ; < DDR 2133 - DDR2400_FREQUENCY EQU 1200 ; < DDR 2400 - UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_AUTO EQU 2 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT_INITIAL EQU 0 ; < Initial value for VDDIO - VOLT1_5 EQU 1 ; < 1.5 Volt - VOLT1_35 EQU 2 ; < 1.35 Volt - VOLT1_25 EQU 3 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0FFh ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Force Training Mode - -;del FORCE_TRAIN_1D EQU 0 ; < 1D Training only - FORCE_TRAIN_2D EQU 1 ; < 2D Training only - FORCE_TRAIN_AUTO EQU 2 ; < Auto - 1D or 2D depending on configuration -FORCE_TRAIN_MODE TEXTEQU <DWORD> - -; The possible DRAM prefetch mode settings. - DRAM_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_DRAM_PREFETCH_FOR_IO EQU 1 ; Disable DRAM prefetching for I/O requests only. - DISABLE_DRAM_PREFETCH_FOR_CPU EQU 2 ; Disable DRAM prefetching for requests from processor cores only. - DISABLE_DRAM_PREFETCHER EQU 3 ; Disable DRAM prefetching. - MAX_DRAM_FREFETCH_MODE EQU 4 ; Not a DRAM prefetch mode, use for limit checking. -DRAM_PREFETCH_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_4MB_ALIGNED EQU 00FFFFC0h - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqs2dDlys POINTER ? ; < 2d Read DQS data - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RcvEnDlysMemPs1 POINTER ? ; < DQS Receiver Enable Delays for Memory Pstate 1 - WrDqsDlysMemPs1 POINTER ? ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3) - RdDqsDlysMemPs1 POINTER ? ; < Read Dqs delays for Memory Pstate 1 - WrDatDlysMemPs1 POINTER ? ; < Write Data delays for Memory Pstate 1 - RdDqs2dDlysMemPs1 POINTER ? ; < 2d Read DQS data for Memory Pstate 1 - RdDqsMinDlysMemPs1 POINTER ? ; < Minimum Window for Read DQS for Memory Pstate 1 - RdDqsMaxDlysMemPs1 POINTER ? ; < Maximum Window for Read DQS for Memory Pstate 1 - WrDatMinDlysMemPs1 POINTER ? ; < Minimum Window for Write data for Memory Pstate 1 - WrDatMaxDlysMemPs1 POINTER ? ; < Maximum Window for Write data for Memory Pstate 1 - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - FailingBitMaskMemPs1 POINTER ? ; < Table of masks to Track Failing bits for Memory Pstate 1 - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 (4) DUP (?) ; < Max Read Latency (ns) for the DCT - ; < DctMaxRdLat [i] is for NBPstate i DIMMValidCh UINT8 ? ; < DIMM# in CH - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - DimmNibbleAccess UINT8 ? ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - MaxVref UINT8 ? ; < Maximum Vref Value for channel - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - TimingsMemPs1 POINTER ? ; < Pointed to channel timing structure for Memory Pstate 1 - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT - BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. -;del ExternalVrefValue UINT8 ? ; < Target reference voltage for external Vref for 2D training - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. - ExternalVrefCtl BOOLEAN ? ; < Control the use of external Vref - ; < TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE" in function list - ; < to change the vref - ; < FALSE = AGESA will will use the internal vref control. - ForceTrainMode FORCE_TRAIN_MODE ? ; < Training Mode - ; < 0 = Force 1D Training for all configurations - ; < 1 = Force 2D Training for all configurations - ; < 2 = Auto - AGESA will control 1D or 2D -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - -; =============================================================================== -; Bitfield for ID -; =============================================================================== -ID_FIELD STRUCT - SocketId UINT16 ? -; OUT UINT16 SocketId:8; ; < Socket ID -; OUT UINT16 ModuleId:8; ; < Module ID -ID_FIELD ENDS - -; =============================================================================== -; Union for ID of socket and module that will be passed out in call out -; =============================================================================== -ID_INFO UNION - IdField ID_FIELD {} ; < Bitfield for ID - IdInformation UINT16 ? ; < ID information for call out -ID_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT EQU 04012600h ; < Time out when polling CurNBPstate bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range -MEM_ERROR_NO_2D_RDDQS_WINDOW EQU 040D0300h ; < No 2D RdDqs Window -MEM_ERROR_NO_2D_RDDQS_HEIGHT EQU 040E0300h ; < No 2D RdDqs Height -MEM_ERROR_2D_DQS_ERROR EQU 040F0300h ; < 2D RdDqs Error -MEM_ERROR_INVALID_2D_RDDQS_VALUE EQU 04022400h ; < 2d RdDqs invalid value found -MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR EQU 04023400h ; < 2d RdDqs Vef Margin error found -MEM_ERROR_LR_IBT_NOT_FOUND EQU 04013500h ; < No LR dimm IBT value is found -MEM_ERROR_MR0_NOT_FOUND EQU 04023500h ; < No MR0 value is found -MEM_ERROR_ODT_PATTERN_NOT_FOUND EQU 04033500h ; < No odt pattern value is found -MEM_ERROR_RC2_IBT_NOT_FOUND EQU 04043500h ; < No RC2 IBT value is found -MEM_ERROR_RC10_OP_SPEED_NOT_FOUND EQU 04053500h ; < No RC10 op speed is found -MEM_ERROR_RTT_NOT_FOUND EQU 04063500h ; < No RTT value is found -MEM_ERROR_P2D_NOT_FOUND EQU 04073500h ; < No 2D training config value is found -MEM_ERROR_SAO_NOT_FOUND EQU 04083500h ; < No slow access mode, Address timing and Output driver compensation value is found -MEM_ERROR_CLK_DIS_MAP_NOT_FOUND EQU 04093500h ; < No CLK disable map is found -MEM_ERROR_CKE_TRI_MAP_NOT_FOUND EQU 040A3500h ; < No CKE tristate map is found -MEM_ERROR_ODT_TRI_MAP_NOT_FOUND EQU 040B3500h ; < No ODT tristate map is found -MEM_ERROR_CS_TRI_MAP_NOT_FOUND EQU 040C3500h ; < No CS tristate map is found -MEM_ERROR_TRAINING_SEED_NOT_FOUND EQU 040D3500h ; < No training seed is found - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_ECC_DIS EQU 04041700h ; < ECC has been disabled as a result of an internal issue - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 04012400h ; < DDR3 voltage initial value is not 0 - MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 04012500h ; < Cannot find a commonly supported VDDIO - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR_2D EQU 040B1F00h ; < Heap allocation error for 2D training data - MEM_ERROR_HEAP_DEALLOCATE_FOR_2D EQU 040C1F00h ; < Heap de-allocation error for 2D training data - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY EQU 040D1F00h ;< Heap allocation error for CRAT memory affinity info - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; Other CPU events (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h -CPU_EVENT_STACK_REENTRY EQU 008020500h -CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table - AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table - AMD_CRAT_INFO_BUFFER_HANDLE EQU 000D00Bh ; < Assign 0x000D00B buffer handle to CRAT function - AMD_ACPI_CDIT_BUFFER_HANDLE EQU 000D00Ch ; < Assign 0x000D00C buffer handle to CDIT function -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible hardware prefetch mode settings. - HARDWARE_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_L1_PREFETCHER EQU 1 ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching. - DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 2 ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. - DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 3 ; Use the recommended settings for the hardware prefetcher, but disable both the L1 prefetcher and training on software prefetches. - DISABLE_HARDWARE_PREFETCH EQU 4 ; Disable hardware prefetching. - MAX_HARDWARE_PREFETCH_MODE EQU 5 ; Not a hardware prefetch mode, use for limit checking. -HARDWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; The possible software prefetch mode settings. - SOFTWARE_PREFETCHES_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_SOFTWARE_PREFETCHES EQU 1 ; Disable software prefetches (convert software prefetch instructions to NOP). - MAX_SOFTWARE_PREFETCH_MODE EQU 2 ; Not a software prefetch mode, use for limit checking. -SOFTWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; Advanced performance tunings, prefetchers. -; These settings provide for performance tuning to optimize for specific workloads. -ADVANCED_PERFORMANCE_PROFILE STRUCT - HardwarePrefetchMode HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting. - SoftwarePrefetchMode SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions. - DramPrefetchMode DRAM_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. -ADVANCED_PERFORMANCE_PROFILE ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {} ; < The advanced platform performance settings. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. - SviOcpLevel UINT32 ? ; < Vrm SVI OCP Level. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; FCH Platform Configuration Policy -FCH_PLATFORM_POLICY STRUCT - CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address - CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address - CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range - CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block - CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block - CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block - CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block - CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block - CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block - CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block - CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM - CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address - CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller - CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address -;del CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller - CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller - CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller - CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode - CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode - CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode - CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode - CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI - CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI - CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge - CfgSdSsid UINT32 ? ; Subsystem ID of SecureDigital controller - CfgXhciSsid UINT32 ? ; Subsystem ID of XHCI - CfgFchPort80BehindPcib BOOLEAN ? ; Is port80 cycle going to the PCI bridge - CfgFchEnableAcpiSleepTrap BOOLEAN ? ; ACPI sleep SMI enable/disable - CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration - CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present - CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present - CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present - CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present - CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable - CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable - CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable - CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable - - CfgFchEsataPortBitMap UINT8 ? ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable - CfgFchIrPinControl UINT8 ? ; Register bitfield describing Infrared Pin Control: - CfgFchSdClockControl SD_CLOCK_CONTROL ? ; FCH SD Clock Control - CfgFchSciMapControl POINTER ? ; FCH SCI Mapping Control - CfgFchSataPhyControl POINTER ? ; FCH SATA PHY Control - CfgFchGpioControl POINTER ? ; FCH GPIO Control -FCH_PLATFORM_POLICY ENDS - - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionPStatesInHpcMode BOOLEAN ? ; < PSTATES_HPC_MODE - OptionCrat BOOLEAN ? ; < CRAT - OptionCdit BOOLEAN ? ; < CDIT - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgLowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Low power Pstate for PROCHOT mode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - FchBldCfg POINTER ? ; < FCH platform build configuration policy - CfgIommuSupport BOOLEAN ? ; IOMMU support - CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported - CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings - CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode - CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - CfgExternalVrefCtlFeature BOOLEAN ? ; External Vref control - CfgForceTrainMode FORCE_TRAIN_MODE ? ; < Force Train Mode - CfgGnbRemoteDisplaySupport BOOLEAN ? ; Wireless Display Support - CfgIvrsExclusionRangeList POINTER ? ; IOMMU Exclusion Range List - CfgGnbSyncFloodPinAsNmi BOOLEAN ? ; Define function of NMI_SYNCFLOOD as NMI - CfgIgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy - CfgGnbSwTjOffset UINT8 ? ; Software-writeable TjOffset - CfgLvdsMiscVoltAdjustment UINT8 ? ; Travis register LVDS_CTRL_4 to adjust LVDS output voltage - CfgDisplayMiscControl DISPLAY_MISC_CONTROL {}; The Display Misc control - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionCrat BOOLEAN ? ; < When set to TRUE, the CRAT data table is generated. - UserOptionCdit BOOLEAN ? ; < When set to TRUE, the CDIT data table is generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - LowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - PStatesInHpcMode BOOLEAN ? ; < High performance computing (HPC) mode - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - PROC_MANU_LENGTH EQU 29 - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version - T4ProcManufacturer CHAR8 (PROC_MANU_LENGTH) DUP (?) ; < Manufacturer -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. - ExtMaxCapacity UINT64 ? ; < The maximum memory capacity, in bytes, - ; < for this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Registered:1; ; < Registered (Buffered) -; OUT UINT16 Unbuffered:1; ; < Unbuffered (Unregistered) -; OUT UINT16 Reserved2:1; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; < Serial Number. - PartNumber UINT8 (18) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; < Socket ID -; OUT UINT8 Channel:2 ; < Channel ID -; OUT UINT8 Dimm:2 ; < DIMM ID -; OUT UINT8 DimmPresent:1 ; < Dimm Present - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - ConfigSpeed UINT16 ? ; < Configured memory clock speed - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. - ExtEndingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_ONE EQU 5 ; < Level to 1 core - CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores - CoreLevelModeMax EQU 19 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery - FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - GnbPostConfig GNB_POST_CONFIGURATION {} -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < GNB configuration - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics - GnbMidConfiguration GNB_MID_CONFIGURATION {} ; < GNB configuration - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table - AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table - AcpiCrat POINTER ? ; < Component Resource Affinity Table table - AcpiCdit POINTER ? ; < Component Locality Distance Information table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f15tn/Legacy/amd.inc b/src/vendorcode/amd/agesa/f15tn/Legacy/amd.inc deleted file mode 100644 index 550475a04a..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Legacy/amd.inc +++ /dev/null @@ -1,461 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_GET_EXECACHE_SIZE EQU 00020010h - AMD_LATE_RUN_AP_TASK EQU 00020011h - AMD_IDENTIFY_DIMMS EQU 00020012h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f15tn/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f15tn/Legacy/bridge32.inc deleted file mode 100644 index dbcbf186dc..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Legacy/bridge32.inc +++ /dev/null @@ -1,576 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ -; -; **************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f15tn/Lib/x64/amdlib64.asm b/src/vendorcode/amd/agesa/f15tn/Lib/x64/amdlib64.asm deleted file mode 100644 index c528a750aa..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Lib/x64/amdlib64.asm +++ /dev/null @@ -1,602 +0,0 @@ -;/** -; * @file -; * -; * Agesa library 64bit -; * -; * Contains AMD AGESA Library -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Lib -; * @e \$Revision: 17071 $ @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $ -; */ -;***************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -.code -;/*++ - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO byte -; * -; * @param[in] CX IO port address -; * @param[in] DL IO port Value -; */ - -PUBLIC WriteIo8 -WriteIo8 PROC - mov al, dl - mov dx, cx - out dx, al - ret -WriteIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO word -; * -; * @param[in] CX IO port address -; * @param[in] DX IO port Value -; */ -PUBLIC WriteIo16 -WriteIo16 PROC - mov ax, dx - mov dx, cx - out dx, ax - ret -WriteIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write IO dword -; * -; * @param[in] CX IO port address -; * @param[in] EDX IO port Value -; */ - -PUBLIC WriteIo32 -WriteIo32 PROC - mov eax, edx - mov dx, cx - out dx, eax - ret -WriteIo32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO byte -; * -; * @param[in] CX IO port address -; * @retval AL IO port Value -; */ -PUBLIC ReadIo8 -ReadIo8 PROC - mov dx, cx - in al, dx - ret -ReadIo8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO word -; * -; * @param[in] CX IO port address -; * @retval AX IO port Value -; */ -PUBLIC ReadIo16 -ReadIo16 PROC - mov dx, cx - in ax, dx - ret -ReadIo16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read IO dword -; * -; * @param[in] CX IO port address -; * @retval EAX IO port Value -; */ -PUBLIC ReadIo32 -ReadIo32 PROC - mov dx, cx - in eax, dx - ret -ReadIo32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrRead -LibAmdMsrRead PROC - push rsi - mov rsi, rdx - rdmsr - mov [rsi], eax - mov [rsi+4], edx - pop rsi - ret -LibAmdMsrRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write MSR -; * -; * @param[in] RCX MSR Address -; * @param[in] RDX Pointer to data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdMsrWrite -LibAmdMsrWrite PROC - push rsi - mov rsi, rdx - mov eax, [rsi] - and rax, 0ffffffffh - mov edx, [rsi+4] - and rdx, 0ffffffffh - wrmsr - pop rsi - ret -LibAmdMsrWrite ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read CPUID -; * -; * @param[in] RCX CPUID function -; * @param[in] RDX Pointer to CPUID_DATA to save cpuid data -; * @param[in] R8D ConfigPtr (Optional) -; */ -PUBLIC LibAmdCpuidRead -LibAmdCpuidRead PROC - - push rbx - push rsi - mov rsi, rdx - mov rax, rcx - cpuid - mov [rsi], eax - mov [rsi+4], ebx - mov [rsi+8], ecx - mov [rsi+12],edx - pop rsi - pop rbx - ret - -LibAmdCpuidRead ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read TSC -; * -; * -; * @retval RAX Time stamp counter value -; */ - -PUBLIC ReadTSC -ReadTSC PROC - rdtsc - and rax, 0ffffffffh - shl rdx, 32 - or rax, rdx - ret -ReadTSC ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO byte -; * -; * @param[in] RCX - Memory Address -; * @retval Memory byte at given address -; */ -PUBLIC Read64Mem8 -Read64Mem8 PROC - - xor rax, rax - mov al, [rcx] - ret - -Read64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO word -; * -; * @param[in] RCX - Memory Address -; * @retval Memory word at given address -; */ -PUBLIC Read64Mem16 -Read64Mem16 PROC - - xor rax, rax - mov ax, [rcx] - ret - -Read64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read memory/MMIO dword -; * -; * @param[in] RCX - Memory Address -; * @retval Memory dword at given address -; */ -PUBLIC Read64Mem32 -Read64Mem32 PROC - - xor rax, rax - mov eax, [rcx] - ret - -Read64Mem32 ENDP - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO byte -; * -; * @param[in] RCX Memory Address -; * @param[in] DL Value to write -; */ - -PUBLIC Write64Mem8 -Write64Mem8 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], al - ret - -Write64Mem8 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO word -; * -; * @param[in] RCX Memory Address -; * @param[in] DX Value to write -; */ -PUBLIC Write64Mem16 -Write64Mem16 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], ax - ret - -Write64Mem16 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write memory/MMIO dword -; * -; * @param[in] RCX Memory Address -; * @param[in] EDX Value to write -; */ -PUBLIC Write64Mem32 -Write64Mem32 PROC - - xor rax, rax - mov rax, rdx - mov [rcx], eax - ret - -Write64Mem32 ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Read various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Pointer to value -; */ - -PUBLIC LibAmdReadCpuReg -LibAmdReadCpuReg PROC - - push rax - xor rax, rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - jmp RegRead -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - jmp RegRead -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - jmp RegRead -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - jmp RegRead -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - jmp RegRead -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - jmp RegRead -Reg17h: - cmp cl, 17h - jne RegRead - mov rax, dr7 -RegRead: - mov [rdx], eax - pop rax - ret -LibAmdReadCpuReg ENDP - - - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write various CPU registers -; * -; * @param[in] CL Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7) -; * @param[in] RDX Value to write -; */ - -PUBLIC LibAmdWriteCpuReg -LibAmdWriteCpuReg PROC - - push rax -Reg00h: - cmp cl, 00h - jne Reg04h - mov rax, cr0 - mov eax, edx - mov cr0, rax - jmp Done -Reg04h: - cmp cl, 04h - jne Reg10h - mov rax, cr4 - mov eax, edx - mov cr4, rax - jmp Done -Reg10h: - cmp cl, 10h - jne Reg11h - mov rax, dr0 - mov eax, edx - mov dr0, rax - jmp Done -Reg11h: - cmp cl, 11h - jne Reg12h - mov rax, dr1 - mov eax, edx - mov dr1, rax - jmp Done -Reg12h: - cmp cl, 12h - jne Reg13h - mov rax, dr2 - mov eax, edx - mov dr2, rax - jmp Done -Reg13h: - cmp cl, 13h - jne Reg17h - mov rax, dr3 - mov eax, edx - mov dr3, rax - jmp Done -Reg17h: - cmp cl, 17h - jne Done - mov rax, dr7 - mov eax, edx - mov dr7, rax -Done: - pop rax - ret -LibAmdWriteCpuReg ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Write back invalidate caches using wbinvd. -; * -; * -; * -; */ - -PUBLIC LibAmdWriteBackInvalidateCache -LibAmdWriteBackInvalidateCache PROC - wbinvd - ret -LibAmdWriteBackInvalidateCache ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ - -PUBLIC StopHere -StopHere PROC -@@: - jmp short @b -StopHere ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Enter debugger on SimNow -; * -; * -; * -; */ -PUBLIC LibAmdSimNowEnterDebugger -LibAmdSimNowEnterDebugger PROC - pushfq - mov rax, 0BACCD00Bh ; Backdoor in SimNow - mov rbx, 2 ; Select breakpoint feature - cpuid -@@: - jmp short @b - popfq - ret -LibAmdSimNowEnterDebugger ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * IDS IO port write -; * -; * @param[in] ECX IO Port Address -; * @param[in] EDX Value to write -; * @param[in] R8D IDS flags -; * -; */ - -PUBLIC IdsOutPort -IdsOutPort PROC - push rbx - push rax - - mov ebx, r8d - mov eax, edx - mov edx, ecx - out dx, eax - - pop rax - pop rbx - ret -IdsOutPort ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Force breakpoint on HDT -; * -; * -; */ -PUBLIC LibAmdHDTBreakPoint -LibAmdHDTBreakPoint PROC - - push rbx - - mov rcx, 0C001100Ah ;bit 0 = HDT redirect - mov rdi, 09C5A203Ah ;Password - rdmsr - and rax, 0ffffffffh - or rax, 1 - - wrmsr - - mov rax, 0B2h ;Marker = B2 - db 0F1h ;ICEBP - - pop rbx - ret - -LibAmdHDTBreakPoint ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most right hand side non-zero bit with -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanForward -LibAmdBitScanForward PROC - bsf eax, ecx - jnz nonZeroSource - mov al,32 -nonZeroSource: - ret -LibAmdBitScanForward ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Find the most left hand side non-zero bit. -; * -; * @param[in] ECX Value -; */ -PUBLIC LibAmdBitScanReverse -LibAmdBitScanReverse PROC - bsr eax, ecx - jnz nonZeroSource - mov al,0FFh -nonZeroSource: - ret -LibAmdBitScanReverse ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Flush specified number of cache line -; * -; * @param[in] RCX Physical address to be flushed -; * @param[in] DL number of cachelines to be flushed -; */ -PUBLIC LibAmdCLFlush -LibAmdCLFlush PROC - push rax - mov rax, rcx - movzx rcx, dl - @@: - mfence - clflush [rax] - mfence - add rax,64 - loop @B - pop rax - ret -LibAmdCLFlush ENDP - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * FPU init -; * -; * -; */ -PUBLIC LibAmdFinit -LibAmdFinit PROC - finit - ret -LibAmdFinit ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt.asm deleted file mode 100644 index a409f8ed62..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt.asm +++ /dev/null @@ -1,361 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE cpcarmac.inc - .LIST - - .586P - -;=============================================== -;=============================================== -;== -;== M E M O R Y A B S E N T S E G M E N T -;== -;=============================================== -;=============================================== - .MODEL flat - .CODE -;====================================================================== -; ExecuteFinalHltInstruction: Disables the stack and performs -; a hlt instruction on an AP. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteFinalHltInstruction -ExecuteFinalHltInstruction PROC NEAR C USES ESI EDI HaltFlags:DWORD, ApMtrrSettingList:PTR, StandardHeader:PTR - - mov esi, StandardHeader ; The code must reference all parameters to avoid a build warning - mov esi, HaltFlags - mov edi, ApMtrrSettingList - ; Do these special steps in case if the core is part of a compute unit - ; Note: The following bits are family specific flags, that gets set during build time, - ; and indicates things like "family cache control methodology", etc. - ; esi bit0 = 0 -> not a Primary core - ; esi bit0 = 1 -> Primary core - ; esi bit1 = 0 -> Cache disable - ; esi bit1 = 1 -> Cache enable - .if (esi & 2h) - ; Set CombineCr0Cd bit - mov ecx, CU_CFG3 - _RDMSR - bts edx, (COMBINE_CR0_CD - 32) - _WRMSR - ; Clear the CR0.CD bit - mov eax, CR0 ; Make sure cache is enabled for all APs - btr eax, CR0_CD - btr eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .else - mov eax, CR0 ; Make sure cache is disabled for all APs - bts eax, CR0_CD ; Disable cache - bts eax, CR0_NW - mov CR0, eax ; Write back to CR0 - .endif - - .if (esi & 1h) - ; This core is a primary core and needs to do all the MTRRs, including shared MTRRs. - mov esi, edi ; Get ApMtrrSettingList - - ; Configure the MTRRs on the AP so - ; when it runs remote code it will execute - ; out of RAM instead of ROM. - - ; Disable MTRRs and turn on modification enable bit - mov ecx, MTRR_SYS_CFG - _RDMSR - btr eax, MTRR_VAR_DRAM_EN ; Disable - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable - btr eax, MTRR_FIX_DRAM_EN ; Disable - bts eax, SYS_UC_LOCK_EN - _WRMSR - - ; Setup default values for Fixed-Sized MTRRs - ; Set 7FFFh-00000h as WB - mov ecx, AMD_AP_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR - - ; Set 9FFFFh-80000h also as WB - mov ecx, AMD_AP_MTRR_FIX16k_80000 - _WRMSR - - ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO - mov ecx, AMD_AP_MTRR_FIX16k_A0000 - xor eax, eax - xor edx, edx - _WRMSR - - ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO - xor eax, eax - xor edx, edx - mov ecx, AMD_AP_MTRR_FIX4k_C0000 - -CDLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_D8000 - jbe CDLoop - - ; Set FFFFFh-E0000h as Uncacheable Memory - mov eax, 18181818h - mov edx, eax - - mov ecx, AMD_AP_MTRR_FIX4k_E0000 - -EFLoop: - _WRMSR - inc ecx - cmp ecx, AMD_AP_MTRR_FIX4k_F8000 - jbe EFLoop - - ; If IBV provided settings for Fixed-Sized MTRRs, - ; overwrite the default settings. - .if ((esi != 0) && (esi != 0FFFFFFFFh)) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - ; While we are not at the end of the list - .while (ecx != CPU_LIST_TERMINAL) - ; Ensure that the MSR address is valid for Fixed-Sized MTRRs - .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \ - (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000)) - mov eax, dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData - mov edx, dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData - _WRMSR - .endif - add esi, sizeof (AP_MTRR_SETTINGS) - mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr - .endw - .endif - - ; Enable fixed-range and variable-range MTRRs - mov ecx, AMD_MTRR_DEFTYPE - _RDMSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Enable Top-of-Memory setting - ; Enable use of RdMem/WrMem bits attributes - mov ecx, MTRR_SYS_CFG - _RDMSR - bts eax, MTRR_VAR_DRAM_EN ; Enable - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable - bts eax, MTRR_FIX_DRAM_EN ; Enable - _WRMSR - - mov esi, (1 SHL FLAG_IS_PRIMARY) - .else ; end if primary core - xor esi, esi - .endif - ; Make sure not to touch any Shared MSR from this point on - - AMD_DISABLE_STACK_FAMILY_HOOK - - bt esi, FLAG_IS_PRIMARY - .if (carry?) - ; restore variable MTRR6 and MTRR7 to default states - mov ecx, AMD_MTRR_VARIABLE_MASK7 ; clear MTRRPhysBase6 MTRRPhysMask6 - xor eax, eax ; and MTRRPhysBase7 MTRRPhysMask7 - xor edx, edx - .while (cx >= AMD_MTRR_VARIABLE_BASE6) - _WRMSR - dec cx - .endw - .endif - -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction - ret -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -PUBLIC ExecuteHltInstruction -ExecuteHltInstruction PROC NEAR C - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC NmiHandler -NmiHandler PROC NEAR C - iretd -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC GetCsSelector -GetCsSelector PROC NEAR C, CsSelector:PTR - push ax - push ebx - - call FarCallGetCs - mov ebx, CsSelector - mov [ebx], ax - pop ebx - pop ax - ret -GetCsSelector ENDP - -;====================================================================== -; FarCallGetCs: -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -FarCallGetCs PROC FAR PRIVATE - - mov ax, ss:[esp + 4] - retf - -FarCallGetCs ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -PUBLIC SetIdtr -SetIdtr PROC NEAR C USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - lidt fword ptr ss:[ebx] - ret -SetIdtr ENDP - -;====================================================================== -; GetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -PUBLIC GetIdtr -GetIdtr PROC NEAR C USES EBX, IdtPtr:PTR - mov ebx, IdtPtr - sidt fword ptr ss:[ebx] - ret -GetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC ExecuteWbinvdInstruction -ExecuteWbinvdInstruction PROC NEAR C - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt64.asm b/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt64.asm deleted file mode 100644 index b2736c507c..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Proc/CPU/cahalt64.asm +++ /dev/null @@ -1,173 +0,0 @@ -;/** -; * @file -; * -; * Agesa pre-memory miscellaneous support, including ap halt loop. -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: CPU -; */ -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - text SEGMENT - - -;====================================================================== -; ExecuteFinalHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteFinalHltInstruction PROC PUBLIC -@@: - cli - hlt - jmp @B ;ExecuteHltInstruction -ExecuteFinalHltInstruction ENDP - -;====================================================================== -; ExecuteHltInstruction: Performs a hlt instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; eax, ebx, ecx, edx, esp -; -;====================================================================== -ExecuteHltInstruction PROC PUBLIC - cli - hlt - ret -ExecuteHltInstruction ENDP - -;====================================================================== -; NmiHandler: Simply performs an IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -NmiHandler PROC PUBLIC - iretq -NmiHandler ENDP - -;====================================================================== -; GetCsSelector: Returns the current protected mode CS selector. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -GetCsSelector PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -GetCsSelector ENDP - -;====================================================================== -; SetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -SetIdtr PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -SetIdtr ENDP - -;====================================================================== -; GetIdtr: -; -; In: -; @param[in] IdtPtr Points to IDT table -; -; Out: -; None -; -; Destroyed: -; none -; -;====================================================================== -GetIdtr PROC PUBLIC - ; This stub function is here to avoid compilation errors. - ; At this time, there is no need to provide a 64 bit function. - ret -GetIdtr ENDP - -;====================================================================== -; ExecuteWbinvdInstruction: Performs a wbinvd instruction. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -ExecuteWbinvdInstruction PROC PUBLIC - wbinvd ; Write back the cache tag RAMs - ret -ExecuteWbinvdInstruction ENDP - -END diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib32.asm b/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib32.asm deleted file mode 100644 index 4cf423c46a..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib32.asm +++ /dev/null @@ -1,335 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 32bit -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 14305 $ @e \$Date: 2009-05-24 02:20:55 +0800 (Sun, 24 May 2009) $ -; */ -;***************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -public IdsDelay -IdsDelay PROC NEAR C USES EAX EDX -Local targetedx:dword, targeteax:dword - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - mov targetedx,edx - mov targeteax,eax - - rdtsc -;set "Si!=0" skip below loop - .while(1) - .if(si != 0) - jmp delay_exit - .endif - .if(edx > targetedx) - jmp delay_exit - .elseif (edx == targetedx) - .if(eax > targeteax) - jmp delay_exit - .endif - .endif - rdtsc - .endw -delay_exit: - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC NEAR C filecode:dword -local tmpebx:dword,tmpedx:dword - pushad - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, filecode - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov ebx,0dead0000h - mov edx,filecode - ror edx,16 - mov bx,dx - mov dx,0 -;ebx:edx = deadxxxxyyyy0000 xxxx is the filecode yyyy is the line num - mov tmpebx,ebx - mov tmpedx,edx - - xor eax,eax - mov cl,6 - - .while((cl != 0) && (si == 0)) - .if(cl <= 2) - shld eax,edx,8 - shl edx,8 - .else - shld eax,ebx,8 - shl ebx,8 - .endif - - out 80h,eax - call IdsDelay - dec cl - .if(cl == 0) - mov cl,6 - mov ebx,tmpebx - mov edx,tmpedx - .endif - .endw - - popad - xor eax,eax - ret -IdsErrorStop endp - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ -IDS_STOP_HERE MACRO -@@: - jmp short @b -ENDM - -;====================================================================== -; IdsExceptionHandler: Simply performs a jmp $ and IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC _IdsExceptionHandler -PUBLIC _SizeIdtDescriptor -PUBLIC _SizeTotalIdtDescriptors - -; Size of each exception MUST be the same -Exception00: - push eax - mov al, 00h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception01: - push eax - mov al, 01h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception02: - push eax - mov al, 02h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception03: - push eax - mov al, 03h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception04: - push eax - mov al, 04h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception05: - push eax - mov al, 05h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception06: - push eax - mov al, 06h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception07: - push eax - mov al, 07h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception08: - push eax - mov al, 08h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception09: - push eax - mov al, 09h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception10: - push eax - mov al, 10h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception11: - push eax - mov al, 11h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception12: - push eax - mov al, 12h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception13: - push eax - mov al, 13h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception14: - push eax - mov al, 14h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception15: - push eax - mov al, 15h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception16: - push eax - mov al, 16h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception17: - push eax - mov al, 17h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception18: - push eax - mov al, 18h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception19: - push eax - mov al, 19h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception20: - push eax - mov al, 20h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception21: - push eax - mov al, 21h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception22: - push eax - mov al, 22h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception23: - push eax - mov al, 23h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception24: - push eax - mov al, 24h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception25: - push eax - mov al, 25h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception26: - push eax - mov al, 26 - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception27: - push eax - mov al, 27h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception28: - push eax - mov al, 28h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception29: - push eax - mov al, 29h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception30: - push eax - mov al, 30h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception31: - push eax - mov al, 31h - jmp near ptr CommonHandler -CommonHandler: - out 80h, al - pop eax - IDS_STOP_HERE - iretd - -_IdsExceptionHandler dq offset Exception00 -_SizeIdtDescriptor dd (offset Exception01 - offset Exception00) -_SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00) - -END diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib64.asm b/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib64.asm deleted file mode 100644 index fc00e674b7..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Proc/IDS/Control/IdsLib64.asm +++ /dev/null @@ -1,342 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 64bit -; * -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 14126 $ @e \$Date: 2009-05-21 23:02:32 +0800 (Thu, 21 May 2009) $ -; */ -;***************************************************************************** -; - * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -.code -IdsDelay PROC - push rax - push rdx - push rbx - xor rax,rax - xor rdx,rdx - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - shl rdx,32 - add rdx,rax - mov rbx,rdx -;rbx store the target -;set "Si!=0" skip below loop -__loop: - cmp si,0 - jnz __loopexit - rdtsc - shl rdx,32 - add rdx,rax - cmp rdx,rbx - jae __loopexit - jmp __loop -__loopexit: - pop rbx - pop rdx - pop rax - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC -;As x64 calling convention RCX is used as input parameters - push rcx - push rbx - push si - push dx - push rbx - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, ecx - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov rax,0dead00000000h - or rcx,rax -;rcx= 0dead__FILECODE - shl rcx,16 -;rcx= 0dead__FILECODE__0000 - mov rbx,rcx - - xor rax,rax - mov dl,6 - -IdsErrorStopLoop: - cmp dl,0 - jz IdsErrorStopExit - cmp si,0 - jnz IdsErrorStopExit - - shld rax,rcx,8 - shl rcx,8 - out 80h,eax - call IdsDelay - - dec dl - cmp dl,0 - jnz _nextloop - mov dl,6 - mov rcx,rbx -_nextloop: - jmp IdsErrorStopLoop -IdsErrorStopExit: - pop rbx - pop dx - pop si - pop rbx - pop rcx - xor rax,rax - ret -IdsErrorStop endp - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ -IDS_STOP_HERE MACRO -@@: - jmp short @b -ENDM - -;====================================================================== -; IdsExceptionHandler: Simply performs a jmp $ and IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC IdsExceptionHandler -PUBLIC SizeIdtDescriptor -PUBLIC SizeTotalIdtDescriptors - -; Size of each exception MUST be the same -Exception00: - push rax - mov al, 00h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception01: - push rax - mov al, 01h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception02: - push rax - mov al, 02h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception03: - push rax - mov al, 03h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception04: - push rax - mov al, 04h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception05: - push rax - mov al, 05h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception06: - push rax - mov al, 06h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception07: - push rax - mov al, 07h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception08: - push rax - mov al, 08h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception09: - push rax - mov al, 09h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception10: - push rax - mov al, 10h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception11: - push rax - mov al, 11h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception12: - push rax - mov al, 12h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception13: - push rax - mov al, 13h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception14: - push rax - mov al, 14h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception15: - push rax - mov al, 15h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception16: - push rax - mov al, 16h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception17: - push rax - mov al, 17h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception18: - push rax - mov al, 18h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception19: - push rax - mov al, 19h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception20: - push rax - mov al, 20h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception21: - push rax - mov al, 21h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception22: - push rax - mov al, 22h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception23: - push rax - mov al, 23h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception24: - push rax - mov al, 24h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception25: - push rax - mov al, 25h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception26: - push rax - mov al, 26 - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception27: - push rax - mov al, 27h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception28: - push rax - mov al, 28h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception29: - push rax - mov al, 29h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception30: - push rax - mov al, 30h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception31: - push rax - mov al, 31h - jmp near ptr CommonHandler -CommonHandler: - out 80h, al - pop rax - IDS_STOP_HERE - iretq - -IdsExceptionHandler dq offset Exception00 -SizeIdtDescriptor dd (offset Exception01 - offset Exception00) -SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00) - -END - diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f15tn/Proc/Mem/Main/mu.asm deleted file mode 100644 index 8289f44b64..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/Proc/Mem/Main/mu.asm +++ /dev/null @@ -1,496 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Description: Main memory controller system configuration for AGESA -; -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;memUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written -; -; Out: -; -; All registers preserved. -;=============================================================================== -MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemUOutPort ENDP - - -;---------------------------------------------------------------------------- -; _SFENCE(); -; -_SFENCE macro - db 0Fh,0AEh,0F8h - endm - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemUWriteCachelines: -; Write a test pattern to DRAM -; -; In: Pattern - pointer to the write pattern -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - xor ecx, ecx - mov cx,ClCount - shl ecx,2 - @@: - db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemUWriteCachelines ENDP - -;=============================================================================== -;MemUReadCachelines: -; -; Read a pattern of 72 bit times (per DQ), to test dram functionality. The -;pattern is a stress pattern which exercises both ISI and crosstalk. The number -;of cache lines to fill is dependent on DCT width mode and burstlength. -; -; In: Buffer - pointer to a buffer where read data will be stored -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL Count:BYTE - pushad - ; First, issue continuous dummy reads to fill up the cache - mov eax,Address - .if (ClCount > 18) - mov cx,ClCount - shr cx,4 - mov Count,cl - .while (Count != 0) - push eax - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - pop eax - add eax,(16*64) ;Next 16CL - dec Count - .endw - .else - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - .if(ClCount == 1) - _MFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - .elseif(ClCount == 3) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - .elseif(ClCount == 6) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - .elseif(ClCount == 9) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - .elseif(ClCount == 18) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - mov eax,fs:[edx] ;TestAddr+16 cache lines - _MFENCE - mov eax,fs:[edx+64] ;TestAddr+17 cache lines - _MFENCE - .endif - .endif - _MFENCE - - ; Then, copy data to buffer - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - xor ecx, ecx - mov cx,ClCount - shl ecx,6 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemUReadCachelines ENDP - -;=============================================================================== -;MemUDummyCLRead: -; -; Perform a single cache line read from a given physical address. -; -; In: Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD - _SFENCE - pushad - mov eax,Address - mov dl,fs:[eax] - popad - ret -MemUDummyCLRead ENDP - -;=============================================================================== -;MemUFlushPattern: -; -; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used -;to ensure cache miss on the next read training. -; -; In: Address - Physical address to be flushed -; ClCount - number of cachelines to be flushed -; Out: -; -;All registers preserved. -;=============================================================================== -MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD - pushad - mov edi,Address - movzx ecx,ClCount - @@: - _MFENCE ; Force strong ordering of clflush - db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi] - _MFENCE - add edi,64 - loop @B - popad - ret -MemUFlushPattern ENDP - - -;=============================================================================== -;MemUGetWrLvNblErr: -; Read ClCount number of cachelines then return the bitmap that indicates -; the write leveling result of each byte lane. -; -; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result -; Address - Physical address to be sampled -; ClCount - number of cachelines to be read -; -; OUT: ErrBitmap - WL result -; -;All registers preserved -;=============================================================================== -MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL ZeroCount[32]:WORD - - pushad - mov esi,Address - _EXECFENCE - ;Cache fill - movzx ecx,ClCount - @@: - mov eax,fs:[esi] - add esi,64 - loop @B - _MFENCE - - ; Then, count the number of 0's - ;push es - ;push ss - ;pop es - lea edi,ZeroCount - mov cx,SIZEOF ZeroCount - mov al,0 - rep stosb - ;pop es - - mov esi,Address - lea edi,ZeroCount - mov cx,ClCount - shl cx,6 - .while(cx > 0) - mov al,fs:[esi] - test al,00Fh ;check lower nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - test al,0F0h ;check upper nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - inc esi - dec cx - test cx,07h - .if(ZERO?) - sub edi,(16*2) - sub cx,8 - add esi,8 - .endif - .endw - - ; Then, average and compress data to error bits - lea esi,ZeroCount - mov dx,ClCount - shl dx,1 - xor eax,eax - xor ecx,ecx - mov cl,0 - .while(cl<16) - .if(WORD PTR [esi] < dx) - bts eax,ecx - .endif - add esi,2 - inc cl - .endw - xor edx,edx - mov dx,WORD PTR ErrBitmap - mov [edx], ax - - popad - ret -MemUGetWrLvNblErr ENDP - -;=============================================================================== -;AlignPointerTo16Byte: -; Modifies BufferPtr to be 16 byte aligned -; -; In: BufferPtrPtr - Pointer to buffer pointer -; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned -; -;All registers preserved. -;=============================================================================== -AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD - push edx - push eax - mov edx, BufferPtrPtr - mov eax, [edx] - add eax, 16 - and ax, 0FFF0h - mov [edx], eax - pop eax - pop edx - ret -AlignPointerTo16Byte ENDP - -;=============================================================================== -;MemUMFenceInstr: -; Serialize instruction -; -; In: -; Out: -; -;All registers preserved. -;=============================================================================== -MemUMFenceInstr PROC CALLCONV PUBLIC - _MFENCE - ret -MemUMFenceInstr ENDP - - END - diff --git a/src/vendorcode/amd/agesa/f15tn/cpcarmac.inc b/src/vendorcode/amd/agesa/f15tn/cpcarmac.inc deleted file mode 100644 index a3d9f0f73b..0000000000 --- a/src/vendorcode/amd/agesa/f15tn/cpcarmac.inc +++ /dev/null @@ -1,456 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; -; Description: Code to setup and break down cache-as-stack -; -;***************************************************************************** -; -; Copyright (C) 2012 Advanced Micro Devices, Inc. -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; * Redistributions of source code must retain the above copyright -; notice, this list of conditions and the following disclaimer. -; * Redistributions in binary form must reproduce the above copyright -; notice, this list of conditions and the following disclaimer in the -; documentation and/or other materials provided with the distribution. -; * Neither the name of Advanced Micro Devices, Inc. nor the names of -; its contributors may be used to endorse or promote products derived -; from this software without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; -;***************************************************************************** - - .XLIST - INCLUDE cpcar.inc - .LIST - .586P - .mmx - -;====================================================================== -; AMD_ENABLE_STACK: Setup a stack -; -; In: -; EBX = Return address (preserved) -; -; Out: -; SS:ESP - Our new private stack location -; -; EAX = AGESA_STATUS -; EDX = Return status code if EAX contains a return code of higher -; severity than AGESA_SUCCESS -; ECX = Stack size in bytes -; -; Requirements: -; * This routine presently is limited to a max of 64 processor cores -; Preserved: -; ebx ebp -; Destroyed: -; eax, ecx, edx, edi, esi, ds, es, ss, esp -; mmx0, mmx1, mmx5 -; -; Description: -; Fixed MTRR address allocation to cores: -; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. -; There is a max of 1 BSP, 7 core0s and 56 other cores. -; Although each core has it's own cache storage, they share the address space. Each core must -; be assigned a private and unique address space for its stack. To support legacy systems, -; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved -; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) -; -; 80000h 40000h 00000h -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; 64K | | | | | | | | | 64K ea -; ea +----------+----------+----------+----------+----------+----------+----------+----------+ -; | MTRR 0000_0250 MTRRfix64K_00000 | -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node -; |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core -; +----------+----------+----------+----------+----------+----------+----------+----------+ -; -; C0000h B0000h A0000h 90000h 80000h -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -;16K | | | | | | | | | | | | | | | | | -; ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node -; | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core -; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -; -; E0000h D0000h C0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; -; 100000h F0000h E0000h -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -; | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | -; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -;====================================================================== -AMD_ENABLE_STACK MACRO - local AmdEnableStackExit - -; Note that SS:ESP will be default stack. Note that this stack -; routine will not be used after memory has been initialized. Because -; of its limited lifetime, it will not conflict with typical PCI devices. - movd mm0, ebx ; Put return address in a safe place - movd mm1, ebp ; Save some other user registers - - ; get node id and core id of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - ; Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established - - ; If we detected an unknown processor family or core combination, return AGESA_FATAL. - .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY)) - mov edx, CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .elseif (esi & (1 SHL FLAG_CORE_NOT_IDENTIFIED)) - mov edx, CPU_EVENT_CORE_NOT_IDENTIFIED - mov eax, AGESA_FATAL - jmp AmdEnableStackExit - .endif - - ; determine if stack is already enabled. We are using the DefType MSR for this determination. - ; It is =0 after reset; CAR setup sets it to enable the MTRRs - mov eax, cr0 ; Is cache enabled? (CD or NW bit set) - CR0_MASK TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW)) - .if (!(eax & CR0_MASK)) - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) - MSR_MASK TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN)) - .if (eax & MSR_MASK) - bts esi, FLAG_STACK_REENTRY ; indicate stack has already been initialized - .endif - .endif - - ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM - mov ebx, esi ; Get my Node/Core info - xor bl, bl - shl bh, 3 ; Isolate my node#, match alignment for PCI Dev# - mov eax, 8000C144h ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit - add ah, bh - mov ebx, eax ; Save PCI address for Base/Limit pair - - mov dx, 0CF8h - out dx, eax - add dx, 4 - xor eax, eax ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) - out dx, eax ; DRAM Limit = node0, no interleave - - mov eax, ebx - sub eax, 4 ; Now point to the Base register - mov dx, 0CF8h - out dx, eax - add dx, 4 - mov eax, 00000003h ; Set the read and write enable bits - out dx, eax ; DRAM Base = 0x0000, R/W - - AMD_ENABLE_STACK_FAMILY_HOOK - - ; Init CPU MSRs for our init routines - mov ecx, MTRR_SYS_CFG ; SYS_CFG - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Turn on modification enable bit - _WRMSR - - mov eax, esi - bt eax, FLAG_STACK_REENTRY ; Is this a 2nd entry? - .if (!carry?) ; On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP - bt eax, FLAG_IS_PRIMARY ; Is this core the primary in a compute unit? - .if (carry?) ; Families using shared groups do not need to clear the MTRRs since that is done at power-on reset - ; Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores - ; Clear all variable and Fixed MTRRs for non-shared cores - mov ecx, AMD_MTRR_VARIABLE_BASE0 - xor eax, eax - xor edx, edx - .while (cl != 10h) ; Variable MTRRphysBase[n] and MTRRphysMask[n] - _WRMSR - inc cl - .endw - mov cx, AMD_MTRR_FIX64k_00000 ; MSR:0000_0250 - _WRMSR - mov cx, AMD_MTRR_FIX16k_80000 ; MSR:0000_0258 - _WRMSR - mov cx, AMD_MTRR_FIX16k_A0000 ; MSR:0000_0259 - _WRMSR - mov cx, AMD_MTRR_FIX4k_C0000 ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 - .while (cl != 70h) - _WRMSR - inc cl - .endw - - ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. - ; - not strictly needed since the FixedMTRRs take presedence. - mov eax, (16 * 1024 * 1024) - mov ecx, TOP_MEM ; MSR:C001_001A - _WRMSR - .endif ; End Is_Primary - .endif ; End Stack_ReEntry - - ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores - xor eax, eax - xor edx, edx - mov ecx, IORR_BASE ; MSR:C001_0016 - 0019 - .while (cl != 1Ah) - _WRMSR - inc cl - .endw - mov ecx, TOP_MEM2 ; MSR:C001_001D - _WRMSR - - ; setup MTRRs for stacks - ; A speculative read can be generated by a speculative fetch mis-aligned in a code zone - ; or due to a data zone being interpreted as code. When a speculative read occurs outside a - ; controlled region (intentionally used by software), it could cause an unwanted cache eviction. - ; To prevent speculative reads from causing an eviction, the unused cache ranges are set - ; to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. - ; Note: some core stack regions will share an MTRR since the control granularity is much - ; larger than the allocated stack zone. The allocation algorithm must account for this 'extra' - ; space covered by the MTRR when parseling out cache space for the various uses. In some cases - ; this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c - ; - ; Outcome of this block is that: (Note the MTRR map at the top of the file) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) - ; - - mov eax, esi ; Load Flags, node, core - .if (al == 0) ; Is a core 0? - .if (ah == 0) ; Is Node 0? (BSP) - ; Is BSP, assign a 64K stack; for F10/F12, foce to a 32K stack - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_64K / 1000h)) - bt eax, FLAG_FORCE_32K_STACK - .if (carry?) - mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_32K / 1000h)) - .endif - mov ebp, BSP_STACK_BASE_ADDR - .else ; node 1 to 7, core0 - ; Is a Core0 of secondary node, assign 16K stacks - mov bx, AMD_MTRR_FIX16k_80000 - shl ebx, 16 ; - mov bh, ah ; Node# is used as slot# - mov bl, (CORE0_STACK_SIZE / 1000h) - mov al, ah ; Base = (Node# * Size); - mul bl ; - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE0_STACK_BASE_ADDR - mov ebp, eax - .endif - .else ;core 1 thru core 7 - ; Is core 1-7 of any node, assign 4K stacks - mov al, 8 ; CoreIndex = ( (Node# * 8) ... - mul ah ; - mov bx, si ; - add al, bl ; ... + Core#); - - mov bx, AMD_MTRR_FIX64k_00000 - shl ebx, 16 ; - mov bh, al ; Slot# = (CoreIndex / 16) + 4; - shr bh, 4 ; - add bh, 4 ; - mov bl, (CORE1_STACK_SIZE / 1000h) - - mul bl ; Base = ( (CoreIndex * Size) ... - movzx eax, ax ; - shl eax, 12 ; Expand back to full byte count (* 4K) - add eax, CORE1_STACK_BASE_ADDR ; ... + Base_Addr); - mov ebp, eax - .endif - - ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR) - mov edi, WB_DRAM_TYPE ; Load Cache type in 1st slot - mov cl, bh ; ShiftCount = ((slot# ... - and cl, 03h ; ... % 4) ... - shl cl, 3 ; ... * 8); - shl edi, cl ; Cache type is now in correct position - ror ebx, 16 ; Get the MTRR address - movzx ecx, bx ; - rol ebx, 16 ; Put slot# & size back in BX - _RDMSR ; Read-modify-write the MSR - .if (bh < 4) ; Is value in lower or upper half of MSR? - or eax, edi ; - .else ; - or edx, edi ; - .endif ; - _WRMSR ; - - ; Enable MTRR defaults as UC type - mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF - _RDMSR ; Read-modify-write the MSR - bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn - bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn - _WRMSR - - ; Close the modification window on the Fixed MTRRs - mov ecx, MTRR_SYS_CFG ; MSR:0C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_EN ; MtrrFixDramEn - bts eax, MTRR_VAR_DRAM_EN ; variable MTRR enable bit - btr eax, MTRR_FIX_DRAM_MOD_EN ; Turn off modification enable bit - _WRMSR - - ; Enable caching in CR0 - mov eax, CR0 ; Enable WT/WB cache - btr eax, CR0_PG ; Make sure paging is disabled - btr eax, CR0_CD ; Clear CR0 NW and CD - btr eax, CR0_NW - mov CR0, eax - - ; Use the Stack Base & size to calculate SS and ESP values - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; ebp - start address of stack block - ; ebx - [31:16] - MTRR MSR address - ; - [15:8] - slot# in MTRR register - ; - [7:0] - block size in #4K blocks - ; - mov esp, ebp ; Initialize the stack pointer - mov edi, esp ; Copy the stack start to edi - movzx bx, bl - movzx ebx, bx ; Clear upper ebx, don't need MSR addr anymore - shl ebx, 12 ; Make size full byte count (* 4K) - add esp, ebx ; Set the Stack Pointer as full linear address - sub esp, 4 - ; - ; review: - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - 32b start address of stack block - ; ebx - size of stack block - ; esp - 32b linear stack pointer - ; - - ; Determine mode for SS base; - mov ecx, CR0 ; Check for 32-bit protect mode - bt ecx, CR0_PE ; - .if (!carry?) ; PE=0 means real mode - mov cx, cs ; - .if (cx >= 0D000h) ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000 - ; alter SS:ESP for 16b Real Mode: - mov eax, edi ; - shr eax, 4 ; Create a Real Mode segment for ss, ds, es - mov ss, ax ; - mov ds, ax ; - mov es, ax ; - shl eax, 4 ; - sub edi, eax ; Adjust the clearing pointer for Seg:Offset mode - mov esp, ebx ; Make SP an offset from SS - sub esp, 4 ; - .endif ; endif - ; else - ; Default is to use Protected 32b Mode - .endif - ; - ; Clear The Stack - ; Now that we have set the location and the MTRRs, initialize the cache by - ; reading then writing to zero all of the stack area. - ; review: - ; ss - Stack base - ; esp - stack pointer - ; ebx - size of stack block - ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - ; edi - address of start of stack block - ; - shr ebx, 2 ; - mov cx, bx ; set cx for size count of DWORDS - ; Check our flags - Don't clear an existing stack - .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) ) - cld - mov esi, edi - rep lods DWORD PTR [esi] ; Pre-load the range - xor eax, eax - mov cx, bx - mov esi, edi ; Preserve base for push on stack - rep stos DWORD PTR [edi] ; Clear the range - mov DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword - shl ebx, 2 ; Put stack size and base - push ebx ; in top of stack - push esi - - mov ecx, ebx ; Return size of stack in bytes - mov eax, AGESA_SUCCESS ; eax = AGESA_SUCCESS : no error return code - .else - movzx ecx, cx - shl ecx, 2 ; Return size of stack, in bytes - mov edx, CPU_EVENT_STACK_REENTRY - mov eax, AGESA_WARNING ; eax = AGESA_WARNING (Stack has already been set up) - .endif - -AmdEnableStackExit: - movd ebx, mm0 ; Restore return address - movd ebp, mm1 -ENDM - -;====================================================================== -; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -; should only be executed on the BSP -; -; In: -; none -; -; Out: -; EAX = AGESA_SUCCESS -; -; Preserved: -; ebx -; Destroyed: -; eax, ecx, edx, esp, mmx5 -;====================================================================== -AMD_DISABLE_STACK MACRO - - mov esp, ebx ; Save return address - - ; get node/core/flags of current executing core - GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - - ; Turn on modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable modifications - _WRMSR - - ; Set lower 640K MTRRs for Write-Back memory caching - mov ecx, AMD_MTRR_FIX64k_00000 - mov eax, 1E1E1E1Eh - mov edx, eax - _WRMSR ; 0 - 512K = WB Mem - mov ecx, AMD_MTRR_FIX16k_80000 - _WRMSR ; 512K - 640K = WB Mem - - ; Turn off modification enable bit - mov ecx, MTRR_SYS_CFG ; MSR:C001_0010 - _RDMSR - btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable modification - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable 'normal' cache operations - - mov ebx, esp ; restore return address (ebx) - xor eax, eax - -ENDM diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc deleted file mode 100644 index 872f973585..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc +++ /dev/null @@ -1,701 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * AMD Platform Specific Memory Configuration -; * -; * Contains AMD AGESA Memory Configuration Override Interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** -IFNDEF PSO_ENTRY - PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry -ENDIF -; ***************************************************************************************** -; * -; * PLATFORM SPECIFIC MEMORY DEFINITIONS -; * -; ***************************************************************************************** -; */ -; -; < Memory Speed and DIMM Population Masks -; -; < DDR Speed Masks -; -ANY_SPEED EQU 0FFFFFFFFh -DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) -DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) -DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) -DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) -DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) -DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) -DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) -DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) -DDR2133 EQU ( 1 SHL (DDR2133_FREQUENCY / 66)) -DDR2400 EQU ( 1 SHL (DDR2400_FREQUENCY / 66)) -; < -; < DIMM POPULATION MASKS -; -ANY_ EQU 0FFh -SR_DIMM0 EQU 0001h -SR_DIMM1 EQU 0010h -SR_DIMM2 EQU 0100h -SR_DIMM3 EQU 1000h -DR_DIMM0 EQU 0002h -DR_DIMM1 EQU 0020h -DR_DIMM2 EQU 0200h -DR_DIMM3 EQU 2000h -QR_DIMM0 EQU 0004h -QR_DIMM1 EQU 0040h -QR_DIMM2 EQU 0400h -QR_DIMM3 EQU 4000h -LR_DIMM0 EQU 0001h -LR_DIMM1 EQU 0010h -LR_DIMM2 EQU 0100h -LR_DIMM3 EQU 1000h -ANY_DIMM0 EQU 000Fh -ANY_DIMM1 EQU 00F0h -ANY_DIMM2 EQU 0F00h -ANY_DIMM3 EQU 0F000h -; < -; < CS POPULATION MASKS -; -CS_ANY_ EQU 0FFh -CS0_ EQU 01h -CS1_ EQU 02h -CS2_ EQU 04h -CS3_ EQU 08h -CS4_ EQU 10h -CS5_ EQU 20h -CS6_ EQU 40h -CS7_ EQU 80h -; -; Number of Dimms -; -ANY_NUM EQU 0FFh -NO_DIMM EQU 00h -ONE_DIMM EQU 01h -TWO_DIMM EQU 02h -THREE_DIMM EQU 04h -FOUR_DIMM EQU 08h -; -; DIMM VOLTAGE MASK -; -VOLT_ANY_ EQU 0FFh -VOLT1_5_ EQU 01h -VOLT1_35_ EQU 02h -VOLT1_25_ EQU 04h -; -; NOT APPLICIABLE -; -NA_ EQU 00h -; ***************************************************************************************** -; * -; * Platform Specific Override Definitions for Socket, Channel and Dimm -; * This indicates where a platform override will be applied. -; * -; ***************************************************************************************** -; -; SOCKET MASKS -; -ANY_SOCKET EQU 0FFh -SOCKET0 EQU 01h -SOCKET1 EQU 02h -SOCKET2 EQU 04h -SOCKET3 EQU 08h -SOCKET4 EQU 10h -SOCKET5 EQU 20h -SOCKET6 EQU 40h -SOCKET7 EQU 80h -; -; CHANNEL MASKS -; -ANY_CHANNEL EQU 0FFh -CHANNEL_A EQU 01h -CHANNEL_B EQU 02h -CHANNEL_C EQU 04h -CHANNEL_D EQU 08h -; -; DIMM MASKS -; -ALL_DIMMS EQU 0FFh -DIMM0 EQU 01h -DIMM1 EQU 02h -DIMM2 EQU 04h -DIMM3 EQU 08h -; -; REGISTER ACCESS MASKS -; -ACCESS_NB0 EQU 0h -ACCESS_NB1 EQU 01h -ACCESS_NB2 EQU 02h -ACCESS_NB3 EQU 03h -ACCESS_NB4 EQU 04h -ACCESS_PHY EQU 05h -ACCESS_DCT_XT EQU 06h -; -; MOTHER BOARD DESIGN LAYERS MASKS -; Indicates the layer design of mother board -; -LAYERS_4 EQU 0h -LAYERS_6 EQU 01h -; ***************************************************************************************** -; * -; * Platform Specific Overriding Table Definitions -; * -; ***************************************************************************************** -PSO_END EQU 0 ; < Table End -PSO_CKE_TRI EQU 1 ; < CKE Tristate Map -PSO_ODT_TRI EQU 2 ; < ODT Tristate Map -PSO_CS_TRI EQU 3 ; < CS Tristate Map -PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel -PSO_CLK_SPEED EQU 5 ; < Clock Speed -PSO_DIMM_TYPE EQU 6 ; < Dimm Type -PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map -PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket -PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed -PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel -PSO_MEM_TECH EQU 11 ; < Channel Memory Type -PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay -PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed -PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs -PSO_SOLDERED_DOWN_SODIMM_TYPE EQU 15 ; < Soldered down SODIMM type -PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V -PSO_MIN_RD_WR_DATAEYE_WIDTH EQU 17 ; < Min RD/WR dataeye width -PSO_CPU_FAMILY_TO_OVERRIDE EQU 18 ; < CPU family signature to tell following PSO macros are CPU family dependent -PSO_MAX_SOLDERED_DOWN_DIMMS EQU 19 ; < Max Soldered-down Dimms per channel -PSO_MEMORY_POWER_POLICY EQU 20 ; < Memory power policy override -PSO_MOTHER_BOARD_LAYERS EQU 21 ; < Mother board layer design -; ********************************** -; * CONDITIONAL PSO SPECIFIC ENTRIES -; ********************************** -; Condition Types -CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types -PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block -PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected -PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel -PSO_CONDITION_REG EQU 103 ; Reserved -PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types -; Action Types -PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types -PSO_ACTION_ODT EQU 120 ; < ODT values to override -PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override -PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override -PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override -PSO_ACTION_REG EQU 124 ; Reserved -PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration -PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types -CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types -; ********************************** -; * TABLE DRIVEN PSO SPECIFIC ENTRIES -; ********************************** -; Condition descriptor -PSO_TBLDRV_CONFIG EQU 200 ; < Configuration Descriptor - -; Overriding entry types -PSO_TBLDRV_START EQU 210 ; < Start of Table Driven Overriding Entry Types -PSO_TBLDRV_SPEEDLIMIT EQU 210 ; < Speed Limit -PSO_TBLDRV_ODT_RTTNOM EQU 211 ; < RttNom -PSO_TBLDRV_ODT_RTTWR EQU 212 ; < RttWr -PSO_TBLDRV_ODTPATTERN EQU 213 ; < Odt Patterns -PSO_TBLDRV_ADDRTMG EQU 214 ; < Address/Timing values -PSO_TBLDRV_ODCCTRL EQU 215 ; < ODC Control values -PSO_TBLDRV_SLOWACCMODE EQU 216 ; < Slow Access Mode -PSO_TBLDRV_MR0_CL EQU 217 ; < MR0[CL] -PSO_TBLDRV_MR0_WR EQU 218 ; < MR0[WR] -PSO_TBLDRV_RC2_IBT EQU 219 ; < RC2[IBT] -PSO_TBLDRV_RC10_OPSPEED EQU 220 ; < RC10[Opearting Speed] -PSO_TBLDRV_LRDIMM_IBT EQU 221 ; < LrDIMM IBT -PSO_TBLDRV_2D_TRAINING EQU 222 ; < 2D training -PSO_TBLDRV_INVALID_TYPE EQU 223 ; < Invalid Type -PSO_TBLDRV_END EQU 223 ; < End of Table Driven Overriding Entry Types - - -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CPU_FAMILY_TO_OVERRIDE MACRO CpuFamilyRevision:REQ - DB PSO_CPU_FAMILY_TO_OVERRIDE - DB 4 - DD CpuFamilyRevision -ENDM - -MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_MEMCLK_DIS - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ - DB PSO_CKE_TRI - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map -ENDM - -ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ - DB PSO_ODT_TRI - DB 7 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map -ENDM - -CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ - DB PSO_CS_TRI - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB Bit0Map - DB Bit1Map - DB Bit2Map - DB Bit3Map - DB Bit4Map - DB Bit5Map - DB Bit6Map - DB Bit7Map -ENDM - -NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ - DB PSO_MAX_DIMMS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfDimmSlotsPerChannel -ENDM - -NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfSolderedDownDimmsPerChannel:REQ - DB PSO_MAX_SOLDERED_DOWN_DIMMS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfSolderedDownDimmsPerChannel -ENDM - -NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ - DB PSO_MAX_CHIPSELS - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB NumberOfChipSelectsPerChannel -ENDM - -NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ - DB PSO_MAX_CHNLS - DB 4 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DB NumberOfChannelsPerSocket -ENDM - -OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ - PSO_BUS_SPEED - DB 11 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DD TimingMode - DD BusSpeed -ENDM - -DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ - DB PSO_MEM_TECH - DB 7 - DB SocketID - DB ANY_CHANNEL - DB ALL_DIMMS - DD MemTechType -ENDM - -WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_WL_SEED - DB 12 - DB SocketID - DB ChannelID - DB DimmID - DB Byte0Seed - DB Byte1Seed - DB Byte2Seed - DB Byte3Seed - DB Byte4Seed - DB Byte5Seed - DB Byte6Seed - DB Byte7Seed - DB ByteEccSeed -ENDM - -HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID: REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ -Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ - DB PSO_RXEN_SEED - DB 21 - DB SocketID - DB ChannelID - DB DimmID - DW Byte0Seed - DW Byte1Seed - DW Byte2Seed - DW Byte3Seed - DW Byte4Seed - DW Byte5Seed - DW Byte6Seed - DW Byte7Seed - DW ByteEccSeed -ENDM - -NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ - DB PSO_NO_LRDIMM_CS67_ROUTING - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -SOLDERED_DOWN_SODIMM_TYPE MACRO SocketID:REQ, ChannelID:REQ - DB PSO_SOLDERED_DOWN_SODIMM_TYPE - DB 4 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB 1 -ENDM - -LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO - DB PSO_LVDIMM_VOLT1_5_SUPPORT - DB 4 - DB ANY_SOCKET - DB ANY_CHANNEL - DB ALL_DIMMS - DB 1 -ENDM - -MIN_RD_WR_DATAEYE_WIDTH MACRO SocketID:REQ, ChannelID:REQ, MinRdDataeyeWidth:REQ, MinWrDataeyeWidth:REQ - DB PSO_MIN_RD_WR_DATAEYE_WIDTH - DB 5 - DB SocketID - DB ChannelID - DB ALL_DIMMS - DB MinRdDataeyeWidth - DB MinWrDataeyeWidth -ENDM - -MEMORY_POWER_POLICY_OVERRIDE MACRO PowerPolicy:REQ - DB PSO_MEMORY_POWER_POLICY - DB 4 - DB ANY_SOCKET - DB ANY_CHANNEL - DB ALL_DIMMS - DB PowerPolicy -ENDM - -MOTHER_BOARD_LAYERS MACRO Layers:REQ - DB PSO_MOTHER_BOARD_LAYERS - DB 1 - DB Layers -ENDM -; ***************************************************************************************** -; * -; * CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -CONDITION_AND MACRO - DB PSO_CONDITION_AND - DB 0 -ENDM - -COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ - DB PSO_CONDITION_LOC - DB 3 - DB SocketMsk - DB ChannelMsk - DB DimmMsk -ENDM - -COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_SPD - DB 3 - DB Byte - DB Mask - DB Value -ENDM - -COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ - DB PSO_CONDITION_REG - DB 11 - DB Access - DW Offset - DD Mask - DD Value -ENDM - -ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ - DB PSO_ACTION_ODT - DB 9 - DD Frequency - DB Dimms - DB QrDimms - DB DramOdt - DB QrDramOdt - DB DramDynOdt -ENDM - -ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ - DB PSO_ACTION_ADDRTMG - DB 10 - DD Frequency - DW DimmConfig - DD AddrTmg -ENDM - -ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ - DB PSO_ACTION_ODCCONTROL - DB 10 - DD Frequency - DW DimmConfig - DD OdcCtrl -ENDM - -ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ - DB PSO_ACTION_SLEWRATE - DB 10 - DD Frequency - DW DimmConfig - DD SlewRate -ENDM - -ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ - DB PSO_ACTION_SPEEDLIMIT - DB 9 - DW DimmConfig - DB Dimms - DW SpeedLimit15 - DW SpeedLimit135 - DW SpeedLimit125 -ENDM - -; ***************************************************************************************** -; * -; * END OF CONDITIONAL OVERRIDE TABLE MACROS -; * -; ***************************************************************************************** -; ***************************************************************************************** -; * -; * TABLE DRIVEN OVERRIDE MACROS -; * -; ***************************************************************************************** -; Configuration sub-descriptors -CONFIG_GENERAL EQU 0 -CONFIG_SPEEDLIMIT EQU 1 -CONFIG_RC2IBT EQU 2 -CONFIG_DONT_CARE EQU 3 -Config_Type TEXTEQU <DWORD> -; -; Configuration Macros -; -TBLDRV_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ - DB PSO_TBLDRV_CONFIG - DB 9 - DB CONFIG_GENERAL - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig -ENDM - -TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Dimms:REQ, NumOfSR:REQ, NumOfDR:REQ, NumOfQR:REQ, NumOfLRDimm:REQ - DB PSO_TBLDRV_CONFIG - DB 7 - DB CONFIG_SPEEDLIMIT - DB DimmPerCH - DB Dimms - DB NumOfSR - DB NumOfDR - DB NumOfQR - DB NumOfLRDimm -ENDM - -TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ, NumOfReg:REQ - DB PSO_TBLDRV_CONFIG - DB 10 - DB CONFIG_RC2IBT - DB DimmPerCH - DB DimmVolt - DD Frequency - DW DimmConfig - DB NumOfReg -ENDM -; -; Overriding Macros -; -TBLDRV_CONFIG_ENTRY_SPEEDLIMIT MACRO SpeedLimit1_5:REQ, SpeedLimit1_35:REQ, SpeedLimit1_25:REQ - DB PSO_TBLDRV_SPEEDLIMIT - DB 6 - DW SpeedLimit1_5 - DW SpeedLimit1_35 - DW SpeedLimit1_25 -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTNOM MACRO TgtCS:REQ, RttNom:REQ - DB PSO_TBLDRV_ODT_RTTNOM - DB 2 - DB TgtCS - DB RttNom -ENDM - -TBLDRV_CONFIG_ENTRY_ODT_RTTWR MACRO TgtCS:REQ, RttWr:REQ - DB PSO_TBLDRV_ODT_RTTWR - DB 2 - DB TgtCS - DB RttWr -ENDM - -TBLDRV_CONFIG_ENTRY_ODTPATTERN MACRO RdODTCSHigh:REQ, RdODTCSLow:REQ, WrODTCSHigh:REQ, WrODTCSLow:REQ - DB PSO_TBLDRV_ODTPATTERN - DB 16 - DD RdODTCSHigh - DD RdODTCSLow - DD WrODTCSHigh - DD WrODTCSLow -ENDM - -TBLDRV_CONFIG_ENTRY_ADDRTMG MACRO AddrTmg:REQ - DB PSO_TBLDRV_ADDRTMG - DB 4 - DD AddrTmg -ENDM - -TBLDRV_CONFIG_ENTRY_ODCCTRL MACRO OdcCtrl:REQ - DB PSO_TBLDRV_ODCCTRL - DB 4 - DD OdcCtrl -ENDM - -TBLDRV_CONFIG_ENTRY_SLOWACCMODE MACRO SlowAccMode:REQ - DB PSO_TBLDRV_SLOWACCMODE - DB 1 - DB SlowAccMode -ENDM - -TBLDRV_CONFIG_ENTRY_RC2_IBT MACRO TgtDimm:REQ, IBT:REQ - DB PSO_TBLDRV_RC2_IBT - DB 2 - DB TgtDimm - DB IBT -ENDM - -TBLDRV_OVERRIDE_MR0_CL MACRO RegValOfTcl:REQ, MR0CL13:REQ, MR0CL0:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_CL - DB 3 - DB RegValOfTcl - DB MR0CL13 - DB MR0CL0 -ENDM - -TBLDRV_OVERRIDE_MR0_WR MACRO RegValOfTwr:REQ, MR0WR:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_MR0_WR - DB 2 - DB RegValOfTcl - DB MR0WR -ENDM - -TBLDRV_OVERRIDE_RC10_OPSPEED MACRO Frequency:REQ, MR10OPSPEED:REQ - DB PSO_TBLDRV_CONFIG - DB 1 - DB CONFIG_DONT_CARE - DB PSO_TBLDRV_RC10_OPSPEED - DB 5 - DD Frequency - DB MR10OPSPEED -ENDM - -TBLDRV_CONFIG_ENTRY_LRDMM_IBT MACRO F0RC8:REQ, F1RC0:REQ, F1RC1:REQ, F1RC2:REQ - DB PSO_TBLDRV_LRDIMM_IBT - DB 4 - DB F0RC8 - DB F1RC0 - DB F1RC1 - DB F1RC2 -ENDM - -TBLDRV_CONFIG_ENTRY_2D_TRAINING MACRO Training2dMode:REQ - DB PSO_TBLDRV_2D_TRAINING - DB 1 - DB Training2dMode -ENDM - -; -; Macros for removing entries -; -INVALID_CONFIG_FLAG EQU 8000h - -TBLDRV_INVALID_CONFIG MACRO - DB PSO_TBLDRV_INVALID_TYPE - DB 0 -ENDM -; ***************************************************************************************** -; * -; * END OF TABLE DRIVEN OVERRIDE MACROS -; * -; *****************************************************************************************
\ No newline at end of file diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm deleted file mode 100644 index a3932c19c1..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm +++ /dev/null @@ -1,2676 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; Workfile: arch2008.asm $Revision: 84150 $ $Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; -; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template -; -;***************************************************************************** -; - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - - .XLIST - INCLUDE agesa.inc - INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. - INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. - INCLUDE cpcarmac.inc - INCLUDE bridge32.inc - .LIST - .586p - .mmx - - -;---------------------------------------------------------------------------- -; Local definitions -;---------------------------------------------------------------------------- - -sOemCallout STRUCT - FuncName DD ? ; Call out function name - FuncPtr DW ? ; Call out function pointer -sOemCallout ENDS - -sOemEventHandler STRUCT - ClassCode DD ? ; AGESA event log sub-class code - FuncPtr DW ? ; Event handler function pointer -sOemEventHandler ENDS - -;; A typical legacy BIOS implementation may require the E000 and F000 segments -;; to be cached. -EXE_CACHE_REGION_BASE_0 EQU 0E0000h -EXE_CACHE_REGION_SIZE_0 EQU 20000h - -;; In this sample implementation, the B1 and B2 images are placed next to each -;; other in the BIOS ROM to help with the maximization of cached code. -EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS -EXE_CACHE_REGION_SIZE_1 EQU 40000h - -;; The third region is not needed in our example. -EXE_CACHE_REGION_BASE_2 EQU 0 -EXE_CACHE_REGION_SIZE_2 EQU 0 - - -;---------------------------------------------------------------------------- -; PERSISTENT SEGMENT -; This segment is required to be present throughout all BIOS execution. -;---------------------------------------------------------------------------- - -AMD_PERSISTENT_START - - -;---------------------------------------------------------------------------- -; Instantiate the global descriptor table -;---------------------------------------------------------------------------- - -AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table - ; required by the push-high mechanism. - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the persistent segment -;---------------------------------------------------------------------------- - -;+------------------------------------------------------------------------- -; -; AmdDfltRet -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure. Simply perform a retn instruction. -; -EXTERN AmdDfltRet:NEAR - - -;+------------------------------------------------------------------------- -; -; AmdDfltRetFar -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Far stub procedure. Simply perform a retf instruction. -; -EXTERN AmdDfltRetFar:FAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myModuleTypeMismatchHandler (Example) -; -; Entry: -; ESI - Pointer to the EVENT_PARAMS structure of the failure. -; [ESI].DataParam1 - Socket -; [ESI].DataParam2 - DCT -; [ESI].DataParam3 - Channel -; [ESI].DataParam4 - 0x00000000 -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure can be used to react to a memory module type -; mismatch error discovered by the AGESA code. Actions taken -; may include, but are not limited to: -; Logging the event to NV for display later -; Reset, excluding the mismatch on subsequent reboot -; Do nothing -; -; Dependencies: -; None -; -EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR - -;+--------------------------------------------------------------------------- -; -; oemPlatformConfigInit (Optional) -; -; Entry: -; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be -; passed in to the next AGESA entry point. -; -; typedef struct { -; IN PERFORMANCE_PROFILE PlatformProfile; -; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; -; IN UINT8 CoreLevelingMode; -; IN PLATFORM_C1E_MODES C1eMode; -; IN UINT32 C1ePlatformData; -; IN UINT32 C1ePlatformData1; -; IN UINT32 C1ePlatformData2; -; IN UINT32 C1ePlatformData3; -; IN BOOLEAN UserOptionDmi; -; IN BOOLEAN UserOptionPState; -; IN BOOLEAN UserOptionSrat; -; IN BOOLEAN UserOptionSlit; -; IN BOOLEAN UserOptionWhea; -; IN UINT32 PowerCeiling; -; IN BOOLEAN PstateIndependent; -; } PLATFORM_CONFIGURATION; -; -; typedef struct { -; IN UINT8 Socket; -; IN UINT8 Link; -; IN UINT8 LoFreq; -; IN UINT8 HighFreq; -; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; -; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; -; } CPU_HT_DEEMPHASIS_LEVEL; -; -; typedef struct { -; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; -; IN BOOLEAN UseHtAssist; -; IN BOOLEAN UseAtmMode; -; IN BOOLEAN UseNbrCache; -; IN BOOLEAN Use32ByteRefresh; -; IN BOOLEAN UseVariableMctIsocPriority; -; } PERFORMANCE_PROFILE; -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Provide a single hook routine to modify the parameters of a -; PLATFORM_CONFIGURATION structure before any entry point that -; has such a structure as an input. -; -; Dependencies: -; None -; -; Example: -; If your platform is running in UMA mode, the following code -; may be added: -; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr -; -EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR - -;+--------------------------------------------------------------------------- -; -; oemCallout (Optional) -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The default call out router function which resides in the same -; segment as the push-high bridge code. -; -; Dependencies: -; None -; -EXTERN oemCallout(AmdDfltRet):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the persistent segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdBridge32 -; -; Entry: -; EDX - A Real Mode FAR pointer using seg16:Offset16 format that -; points to a local host environment call-out router. If -; this pointer is not equal to zero, then this pointer is -; used as the call-out router instead of the standard -; OemCallout. This may be useful when the call-out router -; is not located in the same segment as the AmdBridge32 and -; AmdCallout16 routines. -; ESI - A Flat Mode pointer (32-bit address) that points to the -; configuration block (AMD_CONFIG_PARAMS) for the AGESA -; software function. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute an AGESA software function through the Push-High interface. -; -; Dependencies: -; This procedure requires a stack. The host environment must use the -; provided service function to establish the stack environment prior -; to making the call to this procedure. -; -AmdBridge32 PROC FAR PUBLIC - AMD_BRIDGE_32 AMD_GDT ; use the macro for the body - ret -AmdBridge32 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdEnableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; SS:ESP - Points to the private stack location for this processor core. -; ECX - Upon success, contains this processor core's stack size in bytes. -; -; Modified: -; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES -; -; Purpose: -; This procedure is used to establish the stack within the host environment. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to create the stack region. -; -AmdEnableStack PROC NEAR PUBLIC - AMD_ENABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. - ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set - ;; to stack top, and ECX is the stack size in bytes. - jmp bx -AmdEnableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdDisableStack -; -; Entry: -; BX - Return address -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; EAX, ECX, EDX, ESI, ESP -; -; Purpose: -; This procedure is used to remove the pre-memory stack from within the -; host environment. -; The exit state for the BSP is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Processor Cache is enabled (CD bit is cleared). -; MTRRs used for execution cache are kept. -; Cache content is flushed (invalidated without write-back). -; Any family-specific clean-up done. -; The exit state for the APs is described as follows: -; Memory region 00000-9FFFF MTRRS are set as WB memory. -; Memory region A0000-DFFFF MTRRS are set as UC IO. -; Memory region E0000-FFFFF MTRRS are set as UC memory. -; MTRRs used for execution cache are cleared. -; Processor Cache is disabled (CD bit is set). -; Top-of-Memory (TOM) set to the system top of memory as determined -; by the memory initialization routines. -; System lock command is enabled. -; Any family-specific clean-up done. -; -; Dependencies: -; The host environment must use this procedure and not rely on any other -; sources to break down the stack region. -; If executing in 16-bit code, the host environment must establish the -; "Big Real" mode of 32-bit addressing of data. -; -AmdDisableStack PROC NEAR PUBLIC - AMD_DISABLE_STACK - ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. - jmp bx -AmdDisableStack ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCallout16 -; -; Entry: -; [esp+8] - Func -; [esp+12] - Data -; [esp+16] - Configuration Block -; [esp+4] - Return address to AGESA -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; Execute callback from the push-high interface. -; -; Dependencies: -; None -; -AmdCallout16 PROC FAR PUBLIC ; declare the procedure - AMD_CALLOUT_16 oemCallout ; use the macro for the body - ret -AmdCallout16 ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdProcessAgesaErrors (Optional) -; -; Entry: -; AL - Heap status of the AGESA entry point that was just invoked. -; EBX - AGESA image base address. -; EDX - Segment / Offset of the appropriate callout router function. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; This procedure is used to handle any errors that may have occurred -; during an AGESA entry point. -; -; Dependencies: -; None -; -AmdProcessAgesaErrors PROC FAR PUBLIC - LOCAL localCpuInterfaceBlock:EVENT_PARAMS - - pushad - xor edi, edi - mov di, ss - shl edi, 4 - lea esi, localCpuInterfaceBlock - add esi, edi - - ; Fill default config block - mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG - mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx - mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 - mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al - mov edi, SEG AmdCallout16 - shl edi, 4 - add edi, OFFSET AmdCallout16 - mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi - - ; Flush the event log searching for, and handling all monitored events - xor eax, eax - .while (eax == 0) - push edx - call AmdBridge32 - pop edx - .if (eax == AGESA_SUCCESS) - mov eax, (EVENT_PARAMS PTR [esi]).EventInfo - .if (eax != 0) - lea di, cs:AgesaEventTable - -loopThruTable: - cmp di, OFFSET cs:AgesaEventTableEnd - jae unhandledEvent - - cmp eax, cs:[di].sOemEventHandler.ClassCode - je FoundMatch - add di, SIZEOF sOemEventHandler - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemEventHandler.FuncPtr - call bx - -unhandledEvent: - xor eax, eax - .else - mov al, 1 - .endif - .endif - .endw - popad - ret - -AmdProcessAgesaErrors ENDP - - -;---------------------------------------------------------------------------- -; Define the error handler table -;---------------------------------------------------------------------------- - -AgesaEventTable LABEL BYTE - ;; Add entries as desired - ;;--------- - ;; EXAMPLE - ;;--------- - sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> -AgesaEventTableEnd LABEL BYTE - - -AMD_PERSISTENT_END - - - - -;---------------------------------------------------------------------------- -; RECOVERY SEGMENT -; This segment resides in the classic 'boot-block,' and is used -; for recovery. -;---------------------------------------------------------------------------- - -AMD_RECOVERY_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDRecovery (Required for proper recovery mode operation) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDRecovery:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitResetWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; A minimal initialization of the processor core is performed. This -; procedure must be called by all processor cores. The code path -; separates the BSP from the APs and performs a separate and appropriate -; list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Internal heap sub-system initialization -; Primary non-coherent HyperTransportT link initialization -; Return to the host environment to test for Recovery Mode. -; The AP processor cores do not participate in the recovery process. -; However, they execute this routine after being released to execute -; by the BSP during the main boot process. Their actions include the -; following: -; Internal heap sub-system initialization -; Proceed to a wait loop waiting for commands from the BSP -; -; For the cache regions, up to three regions of execution cache can be -; allocated following the following rules: -; 1. Once a region is allocated, it cannot be de-allocated. However, it -; can be expanded. -; 2. At most, two of the three regions can be located above 1 MByte. A -; region failing this rule is ignored. -; 3. All region addresses must be at or above the 0x000D0000 linear -; address. A region failing this rule is ignored. -; 4. The address is aligned on a 32-KByte boundary. Starting addresses -; is rounded down to the nearest 32-Kbyte boundary. -; 5. The execution cache size must be a multiple of 32 KByte. Size is -; rounded up to the next multiple of 32 KByte. -; 6. A region must not span either the 1-MByte boundary or the 4-GByte -; boundary. Allocated size is truncated to not span the boundary. -; 7. The granted cached execution regions, address, and size are calculated -; based on the available cache resources of the processor core. -; Allocations are made up to the limit of cache available on the -; installed processor. -; Warning: Enabling instruction cache outside of this interface can cause -; data corruption. -; -; Dependencies: -; This procedure is expected to be executed soon after a system reset -; for the main boot path or resume path of execution. -; -; This procedure requires a stack. -; -; Because the heap system is not yet operational at the point of the -; interface call, the host environment must allocate the storage for -; the AMD_RESET_PARAMS structure before making the first call to -; AmdCreateStruct. This is the ByHost method of allocation. -; -AmdInitResetWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - local localResetParams:AMD_RESET_PARAMS - - pushad - - ; Prepare for the call to initialize the input parameters for AmdInitReset - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS - lea edx, localResetParams - add edx, eax - push edx - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - pop esi - - ; The structure has been initialized. Now modify the default settings as desired. - - ; Allocate the execution cache to maximize the amount of code in ROM that is cached. - ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code - ; is cached. - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 - mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 - mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 - mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 - - ; Call in to the AmdInitReset entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Early initialization completed successfully. - ;; AGESA_WARNING One or more of the execution cache allocation - ;; rules were violated, but an adjustment was made - ;; and space was allocated. - ;; AGESA_ERROR One or more of the execution cache allocation rules - ;; were violated, which resulted in a requested cache - ;; region to not be allocated. - ;; The storage space allocated for the AMD_RESET_PARAMS - ;; structure is insufficient. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: - - ;; Fixed-Range MTRRs - ;; Name Address Value - ;; ---------------- -------- ---------------- - ;; MTRRfix4k_E0000 0000026C 0505050505050505 - ;; MTRRfix4k_E8000 0000026D 0505050505050505 - ;; MTRRfix4k_F0000 0000026E 0505050505050505 - ;; MTRRfix4k_F8000 0000026F 0505050505050505 - ;; MTRRdefType 000002FF 0000000000000C00 - ;; - ;; Variable-Range MTRRs and IO Range - ;; MTRRphysBase(n) MTRRphysMask(n) - ;; ----------------- ----------------- - ;; n=0 0000000000000000 0000000000000000 - ;; n=1 0000000000000000 0000000000000000 - ;; n=2 0000000000000000 0000000000000000 - ;; n=3 0000000000000000 0000000000000000 - ;; n=4 0000000000000000 0000000000000000 - ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 - ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 - ;; n=7 0000000000000000 0000000000000000 - - - ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is - ;; not necessary. Stack space reclamation is left up to the host BIOS. - - popad - ret - - -AmdInitResetWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitRecoveryWrapper -; -; Entry: -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Perform a minimum initialization of the processor and memory to -; support a recovery mode flash ROM update. -; For the BSP, the following actions are performed: -; Configuration of CPU core for recovery process -; Minimal initialization of some memory -; The AP processor cores do not participate in the recovery process. -; No actions or tasks are performed by the AP cores for this time point. -; -; Dependencies: -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitRecoveryWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterRecovery - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterRecovery - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - - ; Call in to the AmdInitRecovery entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_WARNING One or more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; AGESA_ERROR One or more of the allocation rules were violated, - ;; which resulted in a requested cache region to not be - ;; allocated. - ;; AGESA_FATAL No memory was found in the system. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B1_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitRecovery - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdInitRecoveryWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterRecovery -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitReset and -; AmdInitRecovery. -; -; Dependencies: -; None -; -AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTableRecovery - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterRecovery ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the recovery segment -;---------------------------------------------------------------------------- - -CalloutRouterTableRecovery LABEL BYTE - ;; Standard B1 implementations only need the SPD reader call out function to be implemented. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> -CalloutRouterTableRecoveryEnd LABEL BYTE - - -AMD_RECOVERY_END - - - -;---------------------------------------------------------------------------- -; PRE-MEMORY SEGMENT -; This segment must be uncompressed in the ROM image. -;---------------------------------------------------------------------------- - -AMD_PREMEM_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the recovery segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myReadSPDPremem (Required) -; -; Entry: -; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT8 SocketId; -; IN UINT8 MemChannelId; -; IN UINT8 DimmId; -; IN OUT UINT8 *Buffer; -; IN OUT MEM_DATA_STRUCT *MemData; -; } AGESA_READ_SPD_PARAMS; -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS Indicates the SPD block for the indicated -; DIMM was read successfully. -; AGESA_BOUNDS_CHK The specified DIMM is not present. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function and no memory initialized. -; AGESA_ERROR The DIMM SPD read process has generated -; communication errors. -; -; Modified: -; None -; -; Purpose: -; This call out reads a block of memory SPD data and places it -; into the provided buffer. -; -; Dependencies: -; None -; -EXTERN myReadSPDPremem:NEAR - -;+------------------------------------------------------------------------- -; -; AmdDfltRetPremem -; -; Entry: -; None -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; Near stub procedure in the prememory segment. Simply perform a -; retn instruction. -; -EXTERN AmdDfltRetPremem:NEAR - -;+--------------------------------------------------------------------------- -; -; myDoReset (Required) -; -; Entry: -; EDX - Reset type -; 1 - Warm reset whenever -; 2 - Cold reset whenever -; 3 - Warm reset immediately -; 4 - Cold reset immediately -; ESI - Pointer to an AMD_CONFIG_PARAMS structure. -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; None -; -; Purpose: -; This host environment function must initiate the specified type -; of system reset. -; -; Implementation of this function by the host environment is -; REQUIRED. Some host environments may record this as a request -; allowing other elements in the system to perform some additional -; tasks before the actual reset is issued. -; -; Dependencies: -; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI -; register (F0x6C Link Initialization Control Register) that -; indicate the reset status. These bits are reserved for use by -; the AGESA software and should not be modified by the host -; environment. -; -EXTERN myDoReset:NEAR - - -;+--------------------------------------------------------------------------- -; -; myGetNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveNonVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetNonVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Declare the optional external routines in the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAgesaHookBeforeExitSelfRefresh (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h -; EAX - Contains the AGESA_STATUS return code -; AGESA_SUCCESS The function has completed successfully -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; AGESA_WARNING A non-critical issue has occued in the host environment -; -; Modified: -; None -; -; Purpose: -; General purpose hook called before the exiting self refresh -; This procedure is called once per channel -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make dynamic -; modifications to the memory timing settings specific to the board or host -; environment before exiting self refresh on S3 resume -; -; Dependencies: -; This procedure is called before the exit self refresh bit is set in the resume -; sequence. The host environment must initiate the OS restart process. This procedure -; requires a stack. The host environment must establish the stack environment prior -; to making the call to this procedure -; -EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDramInit (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h -; ESI - Pointer to a data structure containing the memory information -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the host environment -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called before the DRAM_Init bit is set. Called -; once per MCT -; -; Implementation of this function is optional for the host environment -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment -; -; Dependencies: -; None -; -EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR - - -;+--------------------------------------------------------------------------- -; -; myHookBeforeDQSTraining (Optional) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h -; ESI - Pointer to a data structure containing the memory information. -; -; Exit: -; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This function is not implemented by the -; host environment. -; -; Modified: -; None -; -; Purpose: -; General-purpose hook called just before the memory training processes -; begin. Called once per MCT. -; -; Implementation of this function is optional for the host environment. -; This call-out is an opportunity for the host environment to make -; dynamic modifications to the memory timing settings specific to the -; board or host environment. -; -; The host environment may also use this call-out for some board- -; specific features that should be activated at this time point, -; such as: -; Low voltage DIMMs-the host environment should set the recommended -; voltages found in the memory data structure for each memory -; channel. This needs to occur before training begins. -; -; Dependencies: -; None -; -EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the prememory segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEarlyWrapper -; -; Entry: -; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h -; None -; -; Modified: -; None -; -; Purpose: -; A full initialization of the processor is performed. Action details -; differ for the BSP and AP processor cores. -; For the BSP, the following actions are performed: -; Full HyperTransportT link initialization, coherent and non-coherent -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Launch all processor cores -; Configure the processor power management capabilities -; Request a warm reset if needed -; For the AP, the following actions are performed: -; Processor register loading -; Microcode patch load -; Errata workaround processing -; Configure the processor power management capabilities -; -; Dependencies: -; This procedure is expected to be called before main memory initialization -; and before the system warm reset. Prior to this, the basic configuration -; done by the AmdInitReset routine must be completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. -; -; The host environment must recognize that all processor cores are running -; in parallel and avoid activities that might interfere with the core-to-core -; communication, such as modifying the MTRR settings or writing to the APIC -; registers. -; -AmdInitEarlyWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEarly - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) - call oemPlatformConfigInit - - ; Call in to the AmdInitEarly entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT An HyperTransportT link CRC error was observed. - ;; AGESA_WARNING One of more of the allocation rules were violated, - ;; but an adjustment was made and space was allocated. - ;; Or a HyperTransport device does not have the expected - ;; capabilities, or unusable redundant HyperTransport - ;; links were found. - ;; AGESA_ERROR One or more of the allocation rules were violated, which - ;; resulted in a requested cache region to not be allocated. - ;; Or, a HyperTransport device failed to initialize. - ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was - ;; found, or the processors installed were found to have an - ;; insufficient MP capability rating for this platform. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEarly - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEarlyWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitPostWrapper -; -; Entry: -; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h -; None -; -; Modified: -; None -; -; Purpose: -; The main system memory is located, initialized, and brought on-line. -; The processor(s) are prepared for full operation and control by the -; host environment. Action details differ for the BSP and AP processor -; cores. -; For the BSP, the following actions are performed: -; Full memory initialization and configuration. BSP is the master for -; this process and may delegate some tasks to APs. -; AP collection of data for use later. -; Transfer the HOBs including the artifact data out of the pre-memory -; cache storage into a temporary holding buffer in the main memory. -; Check the BIST status of the BSP -; Shut down the APs. -; Prepare for the host environment to begin main boot activity. -; Disable the pre-memory stack. -; For the APs, the following actions are performed: -; Report core identity information. -; Execute indicated memory initialization processes as directed. -; Check the BIST status of the AP -; Disable the pre-memory stack. -; Prepare to halt, giving control to host environment. -; The entire range of system memory is enabled for Write-Back cache. -; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order -; to leave in place any flash ROM region currently set for Write-Protect -; execution cache. -; -; Dependencies: -; This procedure is called after the host environment has determined that -; a normal boot to operating system should be performed after any system -; warm reset is completed and after the configuration done by AmdInitEarly -; has completed. -; -; This procedure requires a stack. The host environment must use one of the -; provided service functions to establish the stack environment prior to -; making the call to this procedure. -; -; The processes performed at this time point require communication between -; processor cores. The host environment must recognize that all processor -; cores are running in parallel and avoid activities that might interfere -; with the core-to-core communication, such as modifying the MTRR settings -; or writing to the APIC registers. -; -AmdInitPostWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitPost - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitPost entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT A BIST error was found on one of the cores. - ;; AGESA_WARNING HT Assist feature is running sub-optimally. - ;; AGESA_FATAL Memory initialization failed. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitPost - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitPostWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitResumeWrapper -; -; Entry: -; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure initializes or re-initializes the silicon components -; for the resume boot path. For the processor, main memory is brought -; out of self-refresh mode. This procedure will use the context data -; in the NvStorage area of the input structure to re-start the main -; memory. The host environment must fill the AMD_S3_PARAMS NvStorage -; and VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, the -; two data areas do not need to be contained in one buffer zone, they -; can be anywhere in the accessible memory address space. If the host -; environment uses a non-volatile storage device accessed on the system -; address bus such as flashROM, then the context data does not need to -; be moved prior to this call. If the host environment uses a non- -; volatile storage device not located on the system address bus (e.g. -; CMOS or SSEPROM) then the host environment must transfer the context -; data to a buffer in main memory prior to calling this procedure. -; -; Dependencies: -; The host environment must have determined that the system should take -; the resume path prior to calling this procedure. The configuration -; done by AmdInitEarly and any necessary warm reset must be complete. -; After this procedure, execution proceeds to general system restoration. -; -; This procedure requires a stack. The host environment must use one of -; the provided service functions to establish the stack environment prior -; to making the call to this procedure. -; -AmdInitResumeWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitResume - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPremem - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPremem - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetNonVolatileS3Context - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx - mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx - - ; Call in to the AmdInitResume entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS Re-initialization has been completed successfully. - .if (eax != AGESA_SUCCESS) - mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - - ; Allow AGESA to free the space used by AmdInitResume - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitResumeWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPremem -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEarly, -; AmdInitPost, and AmdInitResume. -; -; Dependencies: -; None -; -AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePremem - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePrememEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPremem ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the prememory segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePremem LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> - sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> - sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> - sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> - sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> - sOemCallout <AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE, OFFSET my2DTrainVrefChange> -CalloutRouterTablePrememEnd LABEL BYTE - - - -AMD_PREMEM_END - - -;---------------------------------------------------------------------------- -; POST SEGMENT -; This segment may be decompressed and run from system RAM. -;---------------------------------------------------------------------------- - -AMD_POST_START - - -;---------------------------------------------------------------------------- -; Declare the external routines required in the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; myAllocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E3h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The requested size of memory has been -; successfully allocated. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; AGESA_ERROR Less than the requested amount of memory -; was allocated. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must allocate a buffer of the requested size or -; larger. This function is required to be implemented by the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; The host environment may need to reserve a location in the buffer -; to store any host environment specific value(s). The returned -; pointer must not include this reserved space. The host environment -; on the AgesaDeallocateBuffer call needs to account for the reserved -; space. This reserved space may be an identifier or the "handle" -; used to identify the specific memory block. -; -EXTERN myAllocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myDeallocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E5h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA -; software continues with its function. -; AGESA_UNSUPPORTED This is a required function, so this -; value being returned causes a critical -; error response value from the AGESA -; software function. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function releases a valid working buffer. This function is -; required for the host environment to implement. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myDeallocateBuffer:NEAR - -;+--------------------------------------------------------------------------- -; -; myLocateBuffer (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h -; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 BufferLength; -; IN UINT32 BufferHandle; -; OUT VOID *BufferPointer; -; } AGESA_BUFFER_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E7h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_BOUNDS_CHK The presented handle is invalid or the -; buffer could not be located. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of memory allocation. -; This function must locate the buffer related to the indicated -; handle and return the address of the buffer and its length. -; This function is required to be implemented in the host -; environment. -; -; Dependencies: -; The following call-outs must work together in the host system. -; Parameters of the same name have the same function and must be -; treated the same in each function: -; AgesaAllocateBuffer -; AgesaDeallocateBuffer -; AgesaLocateBuffer -; AgesaRunFcnOnAp -; -EXTERN myLocateBuffer:NEAR - - -;+--------------------------------------------------------------------------- -; -; myRunFuncOnAp (Required) -; -; Entry: -; EDX - Local APIC ID of the target core. -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must route execution to the target AP and -; have that AP call the AmdLateRunApTaskWrapper routine defined -; above. -; -; Dependencies: -; None -; -EXTERN myRunFuncOnAp:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveNonVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the non-volatile S3 context block -; ECX - Size in bytes of the non-volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the non-volatile data to an area -; that will not lose context while in the ACPI S3 sleep state, but -; cannot be placed in system RAM. This data will need to be -; available during the call to AmdInitResume. -; -; Dependencies: -; None -; -EXTERN mySaveNonVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; mySaveVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Exit: -; None -; -; Modified: -; None -; -; Purpose: -; The host environment must save the volatile data to an area -; that will not lose context while in the ACPI S3 sleep state. -; This data will need to be available during the call to -; AmdS3LateRestore. -; -; Dependencies: -; None -; -EXTERN mySaveVolatileS3Context:NEAR - -;+--------------------------------------------------------------------------- -; -; myGetVolatileS3Context (Required for proper S3 operation) -; -; Entry: -; None -; -; Exit: -; EBX - Pointer to the volatile S3 context block -; ECX - Size in bytes of the volatile S3 context block -; -; Modified: -; None -; -; Purpose: -; The host environment must return the pointer to the data -; saved during the mySaveVolatileS3Context routine. -; -; Dependencies: -; None -; -EXTERN myGetVolatileS3Context:NEAR - - -;---------------------------------------------------------------------------- -; Define the sample wrapper routines for the POST segment -;---------------------------------------------------------------------------- - -;+--------------------------------------------------------------------------- -; -; AmdInitEnvWrapper -; -; Entry: -; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure uses the AgesaAllocateBuffer call-out to acquire -; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This -; is also known as, or includes, artifact data being used by the -; AGESA software. Upon entry to this procedure, the data is being -; held in a temporary memory location and it must be moved to a -; location controlled and protected by the host environment. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure must be called after full memory is initialized and -; the host environment has taken control of main memory allocation. -; This procedure should be called before the PCI enumeration takes -; place and as soon as possible after the host environment memory -; allocation sub-system has started. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitEnvWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitEnv - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitEnv entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ERROR The artifact data could not be found or the host - ;; environment failed to allocate sufficient buffer space. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitEnv - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret -AmdInitEnvWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitMidWrapper -; -; Entry: -; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure call performs special configuration requirements for -; the graphics display hardware. -; -; These actions are performed by the BSP. The APs are not assigned any -; tasks at this time point. -; -; Dependencies: -; This procedure must be called after PCI enumeration has allocated -; resources, but before the video BIOS call is performed. -; -; This procedure requires a stack. The host environment must use one -; of the provided service functions to establish the stack environment -; prior to making the call to this procedure. -; -AmdInitMidWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitMid - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitMid entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdInitMid - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - - popad - ret - -AmdInitMidWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdInitLateWrapper -; -; Entry: -; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh -; None -; -; Modified: -; None -; -; Purpose: -; The main purpose of this function is to generate informational -; data tables used by the operating system. The individual tables -; can be selected for generation through the user selection entries -; on the input parameters. -; -; This routine uses the Call-Out AgesaAllocateBuffer to allocate a -; buffer of the proper size to contain the data. -; -; The code path separates the BSP from the APs and perform a separate -; and appropriate list of tasks for each class of core. -; For the BSP, the following actions are performed: -; Allocate buffer space for the tables. -; Generate the table contents. -; Make sure that the CPU is in a known good power state before -; proceeding to boot the OS. -; For the APs, the following actions are performed: -; Final register settings preparing for entry to OS. -; Establish the final PState for entry to OS. -; -; Dependencies: -; This routine is expected to be executed late in the boot sequence -; after main memory has been initialized, after PCI enumeration has -; completed, after the host environment ACPI sub-system has started, -; after the host environment has taken control of the APs, but just -; before the start of OS boot. -; -; The host environment must provide the required call-outs listed in -; the "Required Call-Out Procedures" section of the AGESA interface -; specification to provide the buffer space in main memory and execute -; code on the APs. The host environment must register the created ACPI -; table in the main ACPI pointer tables. This may require moving the -; generated tables to another location in memory. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; Some functions depend upon the preservation of the heap data across -; the shift from pre-memory environment to a post-memory environment. -; If that data was not preserved, then those functions cannot complete -; and an error is returned. -; -AmdInitLateWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdInitLate - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, SIZEOF AMD_CONFIG_PARAMS - call oemPlatformConfigInit - - ; Call in to the AmdInitLate entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS The function has completed successfully. - ;; AGESA_ALERT - ;; AGESA_ERROR The system could not allocate the needed amount of - ;; buffer space; or could not locate the artifact data block in - ;; memory. Likely cause: the host environment may not have preserved - ;; the data properly. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - push es - mov ax, SEG AmdAcpiSratPointer - mov es, ax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat - mov es:AmdAcpiSratPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSratSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit - mov es:AmdAcpiSlitPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSlitSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState - mov es:AmdAcpiSsdtPointer, ebx - mov eax, DWORD PTR [ebx + 4] - mov es:AmdAcpiSsdtSize, eax - - xor eax, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaMcePointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaMceSize, eax - - mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce - mov es:AmdAcpiWheaCmcPointer, ebx - mov ax, WORD PTR [ebx] - mov es:AmdAcpiWheaCmcSize, eax - - mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable - mov es:AmdDmiInfoPointer, eax - pop es - - - ; Allow AGESA to free the space used by AmdInitLate - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdInitLateWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3SaveWrapper -; -; Entry: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh -; None -; -; Modified: -; None -; -; Purpose: -; This procedure saves critical registers and/or configuration -; information for preservation across a system suspend mode. All -; actions needed to prepare the processor for suspend mode is -; performed, however this procedure does NOT initiate the suspend -; process. The host environment is expected to perform that duty. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; The initializer routine will NULL out the save area pointers and -; sizes. This procedure will determine the size of storage needed -; for all the processor context, and make a call out to the environment -; for allocation of one buffer to store all of the data. Upon exit, the -; pointers and sizes within the AMD_S3_PARAMS structure will be updated -; with the appropriate addresses within the buffer that was allocated. -; The host environment is expected to then transfer the data pointed to -; by NvStorage to a non-volatile storage area, and the data pointed to -; by VolatileStorage to either a non-volatile storage area or system -; RAM that retains its content across suspend. -; -; Dependencies: -; The host environment must initiate the suspend process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3SaveWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3Save - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - ; Call in to the AmdS3Save entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All suspend duties have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage - call mySaveNonVolatileS3Context - .endif - - mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize - .if (ecx != 0) - mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage - call mySaveVolatileS3Context - .endif - - ; Allow AGESA to free the space used by AmdS3Save - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdS3SaveWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdS3LateRestoreWrapper -; -; Entry: -; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h -; None -; -; Modified: -; None -; -; Purpose: -; This procedure restores the processor state, reloads critical -; silicon component registers, and performs any re-initialization -; required by the silicon. This procedure will use the context data -; in the VolatileStorage area of the input structure to restore the -; processor registers. -; -; The host environment must fill the AMD_S3_PARAMS NvStorage and -; VolatileStorage pointers and related size elements to describe -; the location of the context data. Note that for this procedure, -; the two data areas do not need to be contained in one buffer zone, -; they can be anywhere in the accessible memory address space. If -; the host environment uses a non-volatile storage device accessed -; on the system address bus such as flashROM, then the context data -; does not need to be moved prior to this call. If the host -; environment uses a non-volatile storage device not located on the -; system address bus (e.g. CMOS or SSEPROM) then the host environment -; must transfer the context data to a buffer in main memory prior to -; calling this procedure. -; -; These actions are performed by the BSP. The APs are not assigned -; any tasks at this time point. -; -; Dependencies: -; This procedure is called late in the resume sequence, after the -; PCI control space is restored and just before resuming operating -; system execution. -; -; The host environment must initiate the OS restart process. -; -; This procedure requires a stack. The host environment must establish -; the stack environment prior to making the call to this procedure. -; -AmdS3LateRestoreWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - mov edi, esi - add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) - call oemPlatformConfigInit - - call myGetVolatileS3Context - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx - mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx - - ; Call in to the AmdS3LateRestore entry point - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - ;; AGESA_SUCCESS All resume processes have been completed successfully. - - .if (eax != AGESA_SUCCESS) - mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus - mov ebx, AGESA_B2_ADDRESS - call AmdProcessAgesaErrors - .endif - - ; Allow AGESA to free the space used by AmdS3LateRestore - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret -AmdS3LateRestoreWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdLateRunApTaskWrapper -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h -; DS - 0000 with 4 gigabyte access -; ES - 0000 with 4 gigabyte access -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - D5h -; None -; -; Modified: -; None -; -; Purpose: -; This entry point is tightly connected with the "AgesaRunFcnOnAp" -; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; -; the host environment will then call this entry point to have the AP -; execute the requested function. This is needed late in the Post and -; Resume branches for running an AP task since the AGESA software has -; relinquished control of the APs to the host environment. -; -; Dependencies: -; The host environment must implement the"AgesaRunFcnOnAp" call-out -; and route execution to the target AP. -; -AmdLateRunApTaskWrapper PROC NEAR PUBLIC - local localCfgBlock:AMD_INTERFACE_PARAMS - - pushad - - ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask - xor eax, eax - mov ax, ss - shl eax, 4 - lea esi, localCfgBlock - add esi, eax - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 - mov edx, SEG AmdCallout16 - shl edx, 4 - add edx, OFFSET AmdCallout16 - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx - - mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK - mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram - mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 - push esi - mov dx, SEG AmdCalloutRouterPost - shl edx, 16 - mov dx, OFFSET AmdCalloutRouterPost - push edx - call AmdBridge32 - pop edx - - mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr - - ; The structure has been initialized. Now modify the default settings as desired. - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, es:AmdRunCodeOnApDataPointer - mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax - mov eax, es:AmdRunCodeOnApDataSize - mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax - mov eax, es:AmdRunCodeOnApFunction - mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax - pop es - - ; Call in to the AmdLateRunApTask dispatcher - push edx - call AmdBridge32 - pop edx - - ;; EAX = AGESA_STATUS - push es - mov bx, SEG AmdRunCodeOnApStatus - mov es, bx - mov es:AmdRunCodeOnApStatus, eax - pop es - - ; Allow AGESA to free the space used by AmdLateRunApTask - pop esi - mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT - call AmdBridge32 - - popad - ret - -AmdLateRunApTaskWrapper ENDP - - -;+--------------------------------------------------------------------------- -; -; AmdRunFuncOnAp (Required) -; -; Entry: -; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h -; EDX - Local APIC ID of the target core. -; ESI - Pointer to an AP_EXE_PARAMS structure. -; -; typedef struct { -; IN OUT AMD_CONFIG_PARAMS StdHeader; -; IN UINT32 FunctionNumber; -; IN VOID *RelatedDataBlock; -; IN UINT32 RelatedDataBlockLength; -; } AP_EXE_PARAMS; -; -; Exit: -; After this hook, AGESA will display - AGESA_TESTPOINT - E9h -; EAX - Contains the AGESA_STATUS return code. -; AGESA_SUCCESS The function has completed successfully. -; AGESA_UNSUPPORTED This is a required function, so this value -; being returned causes a critical error -; response value from the AGESAT software -; function and no memory initialized. -; AGESA_WARNING The AP did not respond. -; -; Modified: -; EAX -; -; Purpose: -; This function is used after main memory has been initialized -; and the host environment has taken control of AP task dispatching. -; This function must cause the indicated function code to be executed -; upon the specified Application Processor. This procedure must be -; executed in 32-bit mode. This function is required to be implemented -; in the host environment. -; -; Dependencies: -; The host environment must route execution to the target AP and -; have that AP call the"AmdLateRunApTask" entry point. -; -AmdRunFuncOnAp PROC NEAR PUBLIC - - push es - mov ax, SEG AmdRunCodeOnApDataPointer - mov es, ax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock - mov es:AmdRunCodeOnApDataPointer, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength - mov es:AmdRunCodeOnApDataSize, eax - mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber - mov es:AmdRunCodeOnApFunction, eax - mov eax, AGESA_UNSUPPORTED - mov es:AmdRunCodeOnApStatus, eax - pop es - - call myRunFuncOnAp - - push es - mov ax, SEG AmdRunCodeOnApStatus - mov es, ax - mov eax, es:AmdRunCodeOnApStatus - pop es - ret -AmdRunFuncOnAp ENDP - - - -;+--------------------------------------------------------------------------- -; -; AmdCalloutRouterPost -; -; Entry: -; ECX - Callout function number -; EDX - Function-specific UINTN -; ESI - Pointer to function specific data -; -; Exit: -; EAX - Contains the AGESA_STATUS return code. -; -; Modified: -; None -; -; Purpose: -; The call out router function for AmdInitEnv, -; AmdInitMid, AmdInitLate, AmdS3Save, and -; AmdS3LateRestore. -; -; Dependencies: -; None -; -AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES - xor ax, ax - mov ds, ax - mov es, ax - lea di, cs:CalloutRouterTablePost - mov eax, AGESA_UNSUPPORTED - -loopThruTable: - cmp di, OFFSET cs:CalloutRouterTablePostEnd - jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED - cmp ecx, cs:[di].sOemCallout.FuncName - je FoundMatch - add di, SIZEOF sOemCallout - jmp loopThruTable - -FoundMatch: - mov bx, cs:[di].sOemCallout.FuncPtr - call bx - -amdCpuCalloutExit: - ret -AmdCalloutRouterPost ENDP - - -;---------------------------------------------------------------------------- -; Define the callout dispatch table for the POST segment -;---------------------------------------------------------------------------- - -CalloutRouterTablePost LABEL BYTE - ;; Add entries as desired. - sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> - sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> - sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> - sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> -CalloutRouterTablePostEnd LABEL BYTE - -AMD_POST_END - - -;---------------------------------------------------------------------------- -; CPU DATA SEGMENT -; This segment must be writable, and present at the time that -; AmdInitLate is run. -;---------------------------------------------------------------------------- - -CPU_DATASEG_START - - ;; Data used to store pointers for later use by the host environment. - PUBLIC AmdAcpiSratPointer - PUBLIC AmdAcpiSratSize - PUBLIC AmdAcpiSlitPointer - PUBLIC AmdAcpiSlitSize - PUBLIC AmdAcpiSsdtPointer - PUBLIC AmdAcpiSsdtSize - PUBLIC AmdAcpiWheaMcePointer - PUBLIC AmdAcpiWheaMceSize - PUBLIC AmdAcpiWheaCmcPointer - PUBLIC AmdAcpiWheaCmcSize - PUBLIC AmdDmiInfoPointer - AmdAcpiSratPointer DWORD ? - AmdAcpiSratSize DWORD ? - AmdAcpiSlitPointer DWORD ? - AmdAcpiSlitSize DWORD ? - AmdAcpiSsdtPointer DWORD ? - AmdAcpiSsdtSize DWORD ? - AmdAcpiWheaMcePointer DWORD ? - AmdAcpiWheaMceSize DWORD ? - AmdAcpiWheaCmcPointer DWORD ? - AmdAcpiWheaCmcSize DWORD ? - AmdDmiInfoPointer DWORD ? - - ;; Data used for communication between the AP and the BSP. - PUBLIC AmdRunCodeOnApDataPointer - PUBLIC AmdRunCodeOnApDataSize - PUBLIC AmdRunCodeOnApFunction - PUBLIC AmdRunCodeOnApStatus - AmdRunCodeOnApDataPointer DWORD ? - AmdRunCodeOnApDataSize DWORD ? - AmdRunCodeOnApFunction DWORD ? - AmdRunCodeOnApStatus DWORD ? - -CPU_DATASEG_END - - -END diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc deleted file mode 100644 index 7683b15596..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc +++ /dev/null @@ -1,3300 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -INT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h - AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE EQU 00028146h - AGESA_EXTERNAL_VOLTAGE_ADJUST EQU 00028147h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h - AGESA_GNB_GFX_GET_VBIOS_IMAGE EQU 00028302h - - ; AGESA FCH CALLOUTS - AGESA_FCH_OEM_CALLOUT EQU 00028401h - -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - - -;----------------------------------------------------------------------------- -; FCH DEFINITIONS AND MACROS -; -;----------------------------------------------------------------------------- - -; Configuration values for SdConfig - SdDisable EQU 0 ; Disabled - SdAmda EQU 1 ; AMDA, set 24,18,16, default - SdDma EQU 2 ; DMA clear 24, 16, set 18 - SdPio EQU 3 ; PIO clear 24,18,16 -SD_MODE TEXTEQU <DWORD> - -; Configuration values for SdClockControl - Sd50MhzTraceCableLengthWithinSixInches EQU 4 ; 50Mhz, default - Sd40MhzTraceCableLengthSix2ElevenInches EQU 6 ; 40Mhz - Sd25MhzTraceCableLengthEleven2TwentyfourInches EQU 7 ; 25Mhz -SD_CLOCK_CONTROL TEXTEQU <DWORD> - -; Configuration values for AzaliaController - AzAuto EQU 0 ; Auto - Detect Azalia controller automatically - AzDisable EQU 1 ; Diable - Disable Azalia controller - AzEnable EQU 2 ; Enable - Enable Azalia controller -HDA_CONFIG TEXTEQU <DWORD> - -; Configuration values for IrConfig - IrDisable EQU 0 ; Disable - IrRxTx0 EQU 1 ; Rx and Tx0 - IrRxTx1 EQU 2 ; Rx and Tx1 - IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1 -IR_CONFIG TEXTEQU <DWORD> - -; Configuration values for SataClass - SataNativeIde EQU 0 ; Native IDE mode - SataRaid EQU 1 ; RAID mode - SataAhci EQU 2 ; AHCI mode - SataLegacyIde EQU 3 ; Legacy IDE mode - SataIde2Ahci EQU 4 ; IDE->AHCI mode - SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver) - SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver) -SATA_CLASS TEXTEQU <DWORD> - -; Configuration values for GppLinkConfig - PortA4 EQU 0 ; 4:0:0:0 - PortA2B2 EQU 2 ; 2:2:0:0 - PortA2B1C1 EQU 3 ; 2:1:1:0 - PortA1B1C1D1 EQU 4 ; 1:1:1:1 -GPP_LINKMODE TEXTEQU <DWORD> - -; Configuration values for FchPowerFail - AlwaysOff EQU 0 ; Always power off after power resumes - AlwaysOn EQU 1 ; Always power on after power resumes - UsePrevious EQU 3 ; Resume to same setting when power fails -POWER_FAIL TEXTEQU <DWORD> - -; Configuration values for SATA Link Speed - Gen1 EQU 1 ; SATA port GEN1 speed - Gen2 EQU 2 ; SATA port GEN2 speed - Gen3 EQU 3 ; SATA port GEN3 speed -SATA_SPEED TEXTEQU <DWORD> - -; Configuration values for GPIO function - Function0 EQU 0 ; GPIO Function 1 - Function1 EQU 1 ; GPIO Function 1 - Function2 EQU 2 ; GPIO Function 2 - Function3 EQU 3 ; GPIO Function 3 -GPIO_FUN TEXTEQU <DWORD> - -; Configuration values for GPIO_CFG - OwnedByEc EQU 1 ; This bit can only be written by EC - OwnedByHost EQU 2 ; This bit can only be written by host (BIOS) - Sticky EQU 4 ; If set, [6:3] are sticky - PullUpB EQU 8 ; 0: Pullup enable; 1: Pullup disabled - PullDown EQU 16 ; 0: Pulldown disabled; 1: Pulldown enable - GpioOutEnB EQU 32 ; 0: Output enable; 1: Output disable - GpioOut EQU 64 ; Output state when GpioOutEnB is 0 - GpioIn EQU 128 ; This bit is read only - current pin state -CFG_BYTE TEXTEQU <DWORD> - -; FCH GPIO CONTROL -GPIO_CONTROL STRUCT - GpioPin UINT8 ? ; Gpio Pin, valid range: 0-67, 128-150, 160-228 - PinFunction GPIO_FUN ? ; Multi-function selection - CfgByte CFG_BYTE ? ; GPIO Register value -GPIO_CONTROL ENDS - -; FCH SCI MAP CONTROL -SCI_MAP_CONTROL STRUCT - InputPin UINT8 ? ; Input Pin, valid range 0-63 - GpeMap UINT8 ? ; Gpe Map, valid range 0-31 -SCI_MAP_CONTROL ENDS - -; FCH SATA PHY CONTROL -SATA_PHY_CONTROL STRUCT - CommonPhy BOOLEAN ? ; Common PHY or not - Gen SATA_SPEED ? ; SATA speed - Port UINT8 ? ; Port number, valid range: 0-7 - PhyData UINT32 ? ; SATA PHY data, valid range: 0-0xFFFFFFFF -SATA_PHY_CONTROL ENDS - -; -; FCH Component Data Structure in InitReset stage -; -FCH_RESET_INTERFACE STRUCT - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - - Xhci0Enable BOOLEAN ? ; XHCI0 controller function - ; FALSE - XHCI0 controller disabled - ; TRUE - XHCI0 controller enabled - - Xhci1Enable BOOLEAN ? ; XHCI1 controller function - ; FALSE - XHCI1 controller disabled - ; TRUE - XHCI1 controller enabled - -FCH_RESET_INTERFACE ENDS - - -; -; FCH Component Data Structure from InitEnv stage -; -FCH_INTERFACE STRUCT - SdConfig SD_MODE ? ; Secure Digital (SD) controller mode - AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller - IrConfig IR_CONFIG ? ; Infrared (IR) Configuration - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - SataClass SATA_CLASS ? ; SATA controller mode - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller - ; FALSE - Legacy IDE mode - ; TRUE - Native IDE mode - Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function - ; FALSE - OHCI1 is disabled - ; TRUE - OHCI1 is enabled - Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function - ; FALSE - OHCI2 is disabled - ; TRUE - OHCI2 is enabled - Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function - ; FALSE - OHCI3 is disabled - ; TRUE - OHCI3 is enabled - Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function - ; FALSE - OHCI4 is disabled - ; TRUE - OHCI4 is enabled - XhciSwitch BOOLEAN ? ; XHCI controller Function - ; FALSE - XHCI is disabled - ; TRUE - XHCI is enabled - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - FchPowerFail POWER_FAIL ? ; FCH power failure option -FCH_INTERFACE ENDS - - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the - ; < currently installed processor - C1eModeHardware EQU 2 ; < Hardware method - C1eModeMsgBased EQU 3 ; < Message-based method - C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE - LOW_POWER_PSTATE_FOR_PROCHOT_AUTO EQU 0 ; < Auto - LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE EQU 1 ; < Disabled - MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY - PsdPolicyProcessorDefault EQU 0 ; PSD is dependent or independent per processor default - PsdPolicyDependent EQU 1 ; PSD is forced dependent - PsdPolicyIndependent EQU 2 ; PSD is forced independent - PsdPolicyMax EQU 3 ; Not a valid value, used for verifying input - - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h -DESCRIPTOR_IGNORE EQU 40000000h - -; PCIe link initialization - -EndpointDetect EQU 0 ;Detect endpoint presence -EndpointNotPresent EQU 1 ;Endpoint not present (or connected). Used in case there is alternative way to determine - ;if device present on board or in slot. For example GPIO can be used to determine device presence. -PCIE_ENDPOINT_STATUS TEXTEQU <DWORD> - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -APIC_DEVICE_INFO STRUCT - GroupMap UINT8 ? ; < Group mapping for slot or endpoint device (connected to PCIE port) interrupts . - ; 0 - IGNORE THIS STRUCTURE and use recommended settings - ; 1 - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) - ; 2 - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) - ; ... - ; 8 - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) - Swizzle UINT8 ? ;< Swizzle interrupt in the Group. - ; 0 - ABCD - ; 1 - BCDA - ; 2 - CDAB - ; 3 - DABC - BridgeInt UINT8 ? ; < IOAPIC redirection table entry for PCIE bridge interrupt - ; 0 - Entry 0 of IO APIC redirection table - ; 1 - Entry 1 of IO APIC redirection table - ; ... - ; 31 - Entry 31 of IO APIC redirection table -APIC_DEVICE_INFO ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls - ApicDeviceInfo APIC_DEVICE_INFO {} ; < IOAPIC device programming info - EndpointStatus PCIE_ENDPOINT_STATUS ? ; < PCIe endpoint status -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - DP-to-VGA - ; 6 - DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port - ; 0 - Do not invert (default) - ; 1 - Invert P and N on this lane - Flags UINT8 ? ; < Capabilities flags - ; Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 - ; Flags bit[7:1] Reserved - ; -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - -GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST EQU 001h - -; VBIOS image info -GFX_VBIOS_IMAGE_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard configuration header - ImagePtr POINTER ? ; < Pointer to VBIOS image - GfxPciAddress PCI_ADDR {} ; < PCI address of integrated graphics controller - Flags UINT32 ? ; < BIT[0] - special repost requred -GFX_VBIOS_IMAGE_INFO ENDS - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - PcieGen3 EQU 3 - MaxPcieGen EQU 4 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeDpToVga EQU 5 - ConnectorTypeDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeEDPToLvds EQU 11 - ConnectorTypeEDPToLvdsSwInit EQU 12 - ConnectorTypeAutoDetect EQU 13 - MaxConnectorType EQU 14 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - PcieAcsDisabled EQU 0 - PcieAcsEnabled EQU 1 -PCIE_ACS_CAP TEXTEQU <DWORD> - - ClkPmSupportDisabled EQU 0 - ClkPmSupportEnabled EQU 1 -CLKPM_SUPPORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - -;PCIe_DDI_DATA.Flags definitions -DDI_DATA_FLAGS_DP1_1_ONLY EQU 01h ; < BIT[0] Selects downgrade PHY link to DP1.1 -EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN EQU 02h ; < BIT[1] VBIOS will always output fixed voltage swing during DP link training - -;DP receiver definitions with fixed voltage swing -DP_VS_0_4V_0DB EQU 00h ; < 0x00 -DP_VS_0_6V_0DB EQU 01h ; < 0x01 -DP_VS_0_8V_0DB EQU 02h ; < 0x02 -DP_VS_1_2V_0DB EQU 03h ; < 0x03 -DP_VS_0_4V_3_5DB EQU 08h ; < 0x08 -DP_VS_0_6V_3_5DB EQU 09h ; < 0x09 -DP_VS_0_8V_3_5DB EQU 0Ah ; < 0x0a -DP_VS_0_4V_6DB EQU 10h ; < 0x10 -DP_VS_0_6V_6DB EQU 11h ; < 0x11 -DP_VS_0_4V_9_5DB EQU 18h ; < 0x18 -DP_FIXED_VOLT_SWING_TYPE TEXTEQU <DWORD> - -;IOMMU requestor ID -IOMMU_REQUESTOR_ID STRUCT - Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number -IOMMU_REQUESTOR_ID ENDS - -;IVMD exclusion range descriptor -IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT - Flags UINT32 ? ; Descriptor flags - ; @li @b Flags[31] - Terminate descriptor array. - ; @li @b Flags[30] - Ignore descriptor. - RequestorIdStart IOMMU_REQUESTOR_ID {} ; Requestor ID start - RequestorIdEnd IOMMU_REQUESTOR_ID {} ; Requestor ID end (use same as start for single ID) - RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range - RangeLength UINT64 ? ; Length of exclusion range in bytes -IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; LVDS Misc Control Field -LVDS_MISC_CONTROL_FIELD STRUCT - FpdiMode UINT8 ? - ;IN UINT8 FpdiMode:1; - ;IN UINT8 DlChSwap:1; - ;IN UINT8 VsyncActiveLow:1; - ;IN UINT8 HsyncActiveLow:1; - ;IN UINT8 BLONActiveLow:1; - ;IN UINT8 LvdsVolOverwriteEn:1; - ;IN UINT8 Reserved:2; -LVDS_MISC_CONTROL_FIELD ENDS - -; LVDS Misc Control -LVDS_MISC_CONTROL UNION - Field LVDS_MISC_CONTROL_FIELD {} - Value UINT8 ? -LVDS_MISC_CONTROL ENDS - -; Display Misc Control Field -DISPLAY_MISC_CONTROL_FIELD STRUCT - Reserved1 UINT8 ? - ;IN UINT8 Reserved1:3; - ;IN UINT8 VbiosFastBootEn:1; - ;IN UINT8 Reserved2:4; -DISPLAY_MISC_CONTROL_FIELD ENDS - -; Display Misc Control -DISPLAY_MISC_CONTROL UNION - Field DISPLAY_MISC_CONTROL_FIELD {} - Value UINT8 ? -DISPLAY_MISC_CONTROL ENDS - -; Configuration settings for GNB. -GNB_POST_CONFIGURATION STRUCT - IgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy - ; @li 0 = Auto - use existing default - - ; @li 1 = Disable iGPU if any PCIe/PCI graphics card present -GNB_POST_CONFIGURATION ENDS - - IGPU_DISABLE_AUTO EQU 0 ; Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics - IGPU_DISABLE_ANY_PCIE EQU 1 ; Disable iGPU if any PCI or PCIE graphics card is present - - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - IommuSupport BOOLEAN ? ; IOMMU support. - ; TRUE = Disable and hide IOMMU device. - ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table. - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported. - LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings. - Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode. - LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - GnbRemoteDisplaySupport BOOLEAN ? ; This item enables Wireless Display Support - LvdsMiscVoltAdjustment UINT8 ? ; Register LVDS_CTRL_4 to adjust LVDS output voltage - DisplayMiscControl DISPLAY_MISC_CONTROL {} ; This item configures display misc control - DpFixedVoltSwingType DP_FIXED_VOLT_SWING_TYPE ? ; To indicate fixed voltage swing value -GNB_ENV_CONFIGURATION ENDS - -; Configuration settings for GNB. -GNB_MID_CONFIGURATION STRUCT - iGpuVgaMode UINT8 ? ; < VGA resources decoding configuration for iGPU - ; < @li 0 = iGPU decode all VGA resources (must be promary VGA adapter) - ; < @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter) - PcieAcsCapability UINT8 ? ; < Pcie ACS Capability support - ; < @li 0 = Disabled - ; < @li 1 = Enabled - GnbIoapicAddress UINT64 ? ; < GNB IOAPIC Base Address(NULL if platform configured) -GNB_MID_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; platformTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - -GNB_LATE_CONFIGURATION STRUCT ; - DockedTdpHeadroom BOOLEAN ? ; This item enables docked Tdp headroom. -GNB_LATE_CONFIGURATION ENDS ; - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - DATAEYE_VREF_RANGE EQU 31 ; < Number of VREF steps in Data Eye Bitmap - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - UMA_ATTRIBUTE_ON_DCT2 EQU 10000000h ; < UMA resides on memory that belongs to DCT2 - UMA_ATTRIBUTE_ON_DCT3 EQU 08000000h ; < UMA resides on memory that belongs to DCT3 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Structures use to report AMP status -AMP_STATUS STRUCT - AmpVoltageValid BOOLEAN ? ; < Indicates if Amp voltage is valid - AmpSupportDetectedButNotEnabled BOOLEAN ? ; < Indicates if Amp support is detected but not enabled - AmpSelectedButNotEnabled BOOLEAN ? ; < Indicates if Amp is selected but not enabled -AMP_STATUS ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology - GDDR5_TECHNOLOGY EQU 2 ; < GDDR5 technology - UNSUPPORTED_TECHNOLOGY EQU 3 ; < Unsupported technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - DDR2100_FREQUENCY EQU 1050 ; < DDR 2100 - DDR2133_FREQUENCY EQU 1066 ; < DDR 2133 - DDR2400_FREQUENCY EQU 1200 ; < DDR 2400 - UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_MODE_AUTO EQU 2 - - ; Low voltage support - - VOLT_INITIAL EQU 0 ; < Initial value for VDDIO - VOLT1_5 EQU 1 ; < 1.5 Volt - VOLT1_35 EQU 2 ; < 1.35 Volt - VOLT1_25 EQU 3 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0FFh ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; AMP voltage support - - AMP_VOLT_RSVD EQU 0 ;< Reserved - AMP_VOLT1_5 EQU 1 ;< 1.5 Volt - AMP_VOLT1_55 EQU 2 ;< 1.55 Volt - AMP_VOLT1_6 EQU 3 ;< 1.6 Volt - AMP_VOLT1_65 EQU 4 ;< 1.65 Volt - AMP_VOLT1_7 EQU 5 ;< 1.7 Volt - AMP_VOLT1_75 EQU 6 ;< 1.75 Volt - AMP_VOLT1_8 EQU 7 ;< 1.8 Volt - AMP_VOLT1_85 EQU 8 ;< 1.85 Volt - AMP_VOLT1_9 EQU 9 ;< 1.9 Volt - AMP_VOLT1_45 EQU 10h ;< 1.45 Volt - AMP_VOLT1_4 EQU 20h ;< 1.4 Volt - AMP_VOLT1_35 EQU 30h ;< 1.35 Volt - AMP_VOLT1_3 EQU 40h ;< 1.3 Volt - AMP_VOLT1_25 EQU 50h ;< 1.25 Volt - AMP_VOLT1_2 EQU 60h ;< 1.2 Volt -AMP_DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Force Training Mode - - FORCE_TRAIN_1D EQU 0 ; < 1D Training only - FORCE_TRAIN_2D EQU 1 ; < 2D Training only - FORCE_TRAIN_AUTO EQU 2 ; < Auto - 1D or 2D depending on configuration -FORCE_TRAIN_MODE TEXTEQU <DWORD> - -; The possible DRAM prefetch mode settings. - DRAM_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_DRAM_PREFETCH_FOR_IO EQU 1 ; Disable DRAM prefetching for I/O requests only. - DISABLE_DRAM_PREFETCH_FOR_CPU EQU 2 ; Disable DRAM prefetching for requests from processor cores only. - DISABLE_DRAM_PREFETCHER EQU 3 ; Disable DRAM prefetching. - MAX_DRAM_FREFETCH_MODE EQU 4 ; Not a DRAM prefetch mode, use for limit checking. -DRAM_PREFETCH_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_4MB_ALIGNED EQU 00FFFFC0h - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqs2dDlys POINTER ? ; < 2d Read DQS data - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RcvEnDlysMemPs1 POINTER ? ; < DQS Receiver Enable Delays for Memory Pstate 1 - WrDqsDlysMemPs1 POINTER ? ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3) - RdDqsDlysMemPs1 POINTER ? ; < Read Dqs delays for Memory Pstate 1 - WrDatDlysMemPs1 POINTER ? ; < Write Data delays for Memory Pstate 1 - RdDqs2dDlysMemPs1 POINTER ? ; < 2d Read DQS data for Memory Pstate 1 - RdDqsMinDlysMemPs1 POINTER ? ; < Minimum Window for Read DQS for Memory Pstate 1 - RdDqsMaxDlysMemPs1 POINTER ? ; < Maximum Window for Read DQS for Memory Pstate 1 - WrDatMinDlysMemPs1 POINTER ? ; < Minimum Window for Write data for Memory Pstate 1 - WrDatMaxDlysMemPs1 POINTER ? ; < Maximum Window for Write data for Memory Pstate 1 - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - FailingBitMaskMemPs1 POINTER ? ; < Table of masks to Track Failing bits for Memory Pstate 1 - RdDataEyes POINTER ? ; < Pointer to Read Data Eye Bitmaps - WrDataEyes POINTER ? ; < Pointer to Write Data Eye Bitmaps - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 (4) DUP (?) ; < Max Read Latency (ns) for the DCT - ; < DctMaxRdLat [i] is for NBPstate i DIMMValidCh UINT8 ? ; < DIMM# in CH - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - DimmNibbleAccess UINT8 ? ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - MaxVref UINT8 ? ; < Maximum Vref Value for channel - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - TimingsMemPs1 POINTER ? ; < Pointed to channel timing structure for Memory Pstate 1 - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT - BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT - BankAddrMap UINT8 ? ; < Bank Address Mapping - EnabledChipSels UINT8 ? ; < Number of enabled chip selects on current DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - ExternalVrefValue UINT8 ? ; < Target reference voltage for external Vref for 2D training - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode UINT32 ? ; < User Memclock Mode - - MemClockValue UINT32 ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. - IsCapsuleMode BOOLEAN ? ;< Capsule reboot control - ; < FALSE = This is not a capsule reboot. - ; < TRUE = This is a capsule reboot. - ; < - ExternalVrefCtl BOOLEAN ? ; < Control the use of external Vref - ; < TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE" in function list - ; < to change the vref - ; < FALSE = AGESA will will use the internal vref control. - ForceTrainMode FORCE_TRAIN_MODE ? ; < Training Mode - ; < 0 = Force 1D Training for all configurations - ; < 1 = Force 2D Training for all configurations - ; < 2 = Auto - AGESA will control 1D or 2D - DimmTypeUsedInMixedConfig TECHNOLOGY_TYPE ? ; < Select the preferred technology type that AGESA will enable - ; < when it is mixed with other technology types. - ; < DDR3_TECHNOLOGY = Use DDR3 DIMMs - ; < GDDR5_TECHNOLOGY = Use GDDR5 DIMMs - ; < UNSUPPORTED_TECHNOLOGY = Exit with fatal error when DDR3 and GDDR5 DIMMs - ; < are installed on the same system - AmpEnable BOOLEAN ? ; < AMP functionality control - ; < TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA - ; < detects if memory is capable of it - ; < FALSE = Disable, there is no request to enable memory overclocking function - ; < - AmpWarningMsgEnable BOOLEAN ? ; < AMP warning messages control - ; < TRUE = Enable to log the warning messages of AMP - ; < FALSE = Disable - ; < - AmpStatus AMP_STATUS {} ; < AMP status allows platform BIOS to check which voltage or warning message it should - ; < use/apply. - ; < - ; < AmpVoltageValid : - ; < TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment - ; < FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment - ; < - ; < AmpSupportDetectedButNotEnabled : - ; < TRUE - Display warning message of "AMP support detected but not enabled" - ; < FALSE - No corresponding message should be displayed - ; < - ; < AmpSelectedButNotEnabled : - ; < TRUE - Display warning message of "AMP selected but not enabled" - ; < FALSE - No corresponding message should be displayed - ; < - ; < Note that both of warning message status reports are controlled by AmpWarningMsgEnable - ; < - AmpVoltage AMP_DIMM_VOLTAGE ? ; < AMP voltage which will be sent back to platform BIOS, and - ; < the value in AmpVoltage is valid only if AmpStatus is TRUE returned - DataEyeEn BOOLEAN ? ; < Get 2D training data eye. - ; < TRUE = Enable to get the 2D data eye. - ; < FALSE = The 2D data eye is not enabled. - ; < - DramDoubleRefreshRate BOOLEAN ? ; < Specify the average time between refresh requests to all DRAM devices. - ; < TRUE = 2x refresh rate (3.9us) - ; < FALSE = 1x refresh rate (7.8us) -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - MemType UINT8 ? ; < Indicate the DRAM technology type that is being used - Reserved UINT8 (2) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - -; =============================================================================== -; Bitfield for ID -; =============================================================================== -ID_FIELD STRUCT - SocketId UINT16 ? -; OUT UINT16 SocketId:8; ; < Socket ID -; OUT UINT16 ModuleId:8; ; < Module ID -ID_FIELD ENDS - -; =============================================================================== -; Union for ID of socket and module that will be passed out in call out -; =============================================================================== -ID_INFO UNION - IdField ID_FIELD {} ; < Bitfield for ID - IdInformation UINT16 ? ; < ID information for call out -ID_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_SUCCESS memory events -MEM_EVENT_CAPSULE_IN_EFFECT EQU 04013600h ; < Capsule is in effect -MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT EQU 04023600h ; < Context restore is in effect - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT EQU 04012600h ; < Time out when polling CurNBPstate bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range -MEM_ERROR_NO_2D_RDDQS_WINDOW EQU 040D0300h ; < No 2D RdDqs Window -MEM_ERROR_NO_2D_RDDQS_HEIGHT EQU 040E0300h ; < No 2D RdDqs Height -MEM_ERROR_2D_DQS_ERROR EQU 040F0300h ; < 2D RdDqs Error -MEM_ERROR_INVALID_2D_RDDQS_VALUE EQU 04022400h ; < 2d RdDqs invalid value found -MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR EQU 04023400h ; < 2d RdDqs Vef Margin error found -MEM_ERROR_LR_IBT_NOT_FOUND EQU 04013500h ; < No LR dimm IBT value is found -MEM_ERROR_MR0_NOT_FOUND EQU 04023500h ; < No MR0 value is found -MEM_ERROR_ODT_PATTERN_NOT_FOUND EQU 04033500h ; < No odt pattern value is found -MEM_ERROR_RC2_IBT_NOT_FOUND EQU 04043500h ; < No RC2 IBT value is found -MEM_ERROR_RC10_OP_SPEED_NOT_FOUND EQU 04053500h ; < No RC10 op speed is found -MEM_ERROR_RTT_NOT_FOUND EQU 04063500h ; < No RTT value is found -MEM_ERROR_P2D_NOT_FOUND EQU 04073500h ; < No 2D training config value is found -MEM_ERROR_SAO_NOT_FOUND EQU 04083500h ; < No slow access mode, Address timing and Output driver compensation value is found -MEM_ERROR_CLK_DIS_MAP_NOT_FOUND EQU 04093500h ; < No CLK disable map is found -MEM_ERROR_CKE_TRI_MAP_NOT_FOUND EQU 040A3500h ; < No CKE tristate map is found -MEM_ERROR_ODT_TRI_MAP_NOT_FOUND EQU 040B3500h ; < No ODT tristate map is found -MEM_ERROR_CS_TRI_MAP_NOT_FOUND EQU 040C3500h ; < No CS tristate map is found -MEM_ERROR_TRAINING_SEED_NOT_FOUND EQU 040D3500h ; < No training seed is found -MEM_ERROR_NO_2D_WRDAT_WINDOW EQU 040D0400h ; < No 2D WrDat Window -MEM_ERROR_NO_2D_WRDAT_HEIGHT EQU 040E0400h ; < No 2D WrDat Height -MEM_ERROR_2D_WRDAT_ERROR EQU 040F0400h ; < 2d WrDat Error -MEM_ERROR_INVALID_2D_WRDAT_VALUE EQU 04100400h ; < 2d WrDat invalid value found -MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR EQU 04110400h ; < 2d WrDat Vef Margin error found - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_ECC_DIS EQU 04041700h ; < ECC has been disabled as a result of an internal issue - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 04012400h ; < DDR3 voltage initial value is not 0 - MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 04012500h ; < Cannot find a commonly supported VDDIO - MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED EQU 04012900h ; < AMP support detected but not enabled - MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED EQU 04022900h ; < AMP selected but not enabled - - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR_2D EQU 040B1F00h ; < Heap allocation error for 2D training data - MEM_ERROR_HEAP_DEALLOCATE_FOR_2D EQU 040C1F00h ; < Heap de-allocation error for 2D training data - MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE EQU 040F1F00h ; < Heap allocation error for DATAEYE Storage - MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE EQU 040E1F00h ; < Heap de-allocation error for DATAEYE Storage - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY EQU 040D1F00h ;< Heap allocation error for CRAT memory affinity info - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; TDP Limiting -CPU_EVENT_TDP_LIMIT_FORCE_TO_50_PERCENTAGE EQU 008060100h -CPU_ERROR_TDP_LIMIT_SAVE_PSTATE_FAIL EQU 008060200h -CPU_ERROR_TDP_LIMIT_RESTORE_PSTATE_FAIL EQU 008060201h -CPU_ERROR_TDP_LIMIT_TDP2WATT_IS_ZERO EQU 008060202h -CPU_ERROR_TDP_LIMIT_INVALID_INPUT EQU 008060203h -; Other CPU events (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h -CPU_EVENT_STACK_REENTRY EQU 008020500h -CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h -; SCS initialization (AppFunction = 24h) -; AGESA_SCS_HEAP_ENTRY_MISSING 2401 -; AGESA_SCS_BUFFER_EMPTY 2402 -; AGESA_SCS_WEIGHTS_MISMATCH 2403 -CPU_EVENT_SCS_INITIALIZATION_ERROR EQU 008002400h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - -; VoltageType values - VTYPE_CPU_VREF EQU 0 ; < Cpu side Vref - VTYPE_DIMM_VREF EQU 1 ; < Dimm Side Vref - VTYPE_VDDIO EQU 2 ; < Vddio -VTYPE TEXTEQU <DWORD> - -; Parameters structure for the interface call-out AgesaExternalVoltageAdjust -VOLTAGE_ADJUST STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard configuration header - MemData POINTER ? ; < Location of the MemData structure, for reference - VoltageType VTYPE ? ; < Which Voltage Type to adjust - AdjustValue INT8 ? ; < Positive/Negative Ajdust Value -VOLTAGE_ADJUST ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table - AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table - AMD_CRAT_INFO_BUFFER_HANDLE EQU 000D00Bh ; < Assign 0x000D00B buffer handle to CRAT function - AMD_ACPI_CDIT_BUFFER_HANDLE EQU 000D00Ch ; < Assign 0x000D00C buffer handle to CDIT function -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible hardware prefetch mode settings. - HARDWARE_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 1 ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. - DISABLE_L1_PREFETCHER EQU 2 ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above. - DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 3 ; (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER - DISABLE_L2_STRIDE_PREFETCHER EQU 4 ; Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above - DISABLE_HARDWARE_PREFETCH EQU 5 ; Disable hardware prefetching. - MAX_HARDWARE_PREFETCH_MODE EQU 6 ; Not a hardware prefetch mode, use for limit checking. -HARDWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; The possible software prefetch mode settings. - SOFTWARE_PREFETCHES_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_SOFTWARE_PREFETCHES EQU 1 ; Disable software prefetches (convert software prefetch instructions to NOP). - MAX_SOFTWARE_PREFETCH_MODE EQU 2 ; Not a software prefetch mode, use for limit checking. -SOFTWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; Advanced performance tunings, prefetchers. -; These settings provide for performance tuning to optimize for specific workloads. -ADVANCED_PERFORMANCE_PROFILE STRUCT - HardwarePrefetchMode HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting. - SoftwarePrefetchMode SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions. - DramPrefetchMode DRAM_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. -ADVANCED_PERFORMANCE_PROFILE ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - UseNeighborCache BOOLEAN ? ; < Neighbor cache mode - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {} ; < The advanced platform performance settings. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy - NbPstatesSupported BOOLEAN ? ; < The Nb-Pstates is supported or not -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - MaximumCurrentLimit UINT32 ? ; < Vrm Maximum Current Limit. - SviOcpLevel UINT32 ? ; < Vrm SVI OCP Level. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; FCH Platform Configuration Policy -FCH_PLATFORM_POLICY STRUCT - CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address - CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address - CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range - CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block - CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block - CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block - CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block - CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block - CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block - CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block - CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM - CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address - CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller - CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address - CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller - CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller - CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller - CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode - CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode - CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode - CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode - CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI - CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI - CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge - CfgSdSsid UINT32 ? ; Subsystem ID of SecureDigital controller - CfgXhciSsid UINT32 ? ; Subsystem ID of XHCI - CfgFchPort80BehindPcib BOOLEAN ? ; Is port80 cycle going to the PCI bridge - CfgFchEnableAcpiSleepTrap BOOLEAN ? ; ACPI sleep SMI enable/disable - CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration - CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present - CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present - CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present - CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present - CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable - CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable - CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable - CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable - - CfgFchEsataPortBitMap UINT8 ? ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable - CfgFchIrPinControl UINT8 ? ; Register bitfield describing Infrared Pin Control: - CfgFchSdClockControl SD_CLOCK_CONTROL ? ; FCH SD Clock Control - CfgFchSciMapControl POINTER ? ; FCH SCI Mapping Control - CfgFchSataPhyControl POINTER ? ; FCH SATA PHY Control - CfgFchGpioControl POINTER ? ; FCH GPIO Control - CfgFchRtcWorkaround BOOLEAN ? ; FCH RTC Workaround -FCH_PLATFORM_POLICY ENDS - - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionPStatesInHpcMode BOOLEAN ? ; < PSTATES_HPC_MODE - OptionCrat BOOLEAN ? ; < CRAT - OptionCdit BOOLEAN ? ; < CDIT - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgLowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Low power Pstate for PROCHOT mode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPowerCeiling UINT32 ? ; < PowerCeiling, specifies a maximum power usage limit for the platform - CfgHtcTemperatureLimit UINT16 ? ; < Hardware Thermal Control temperature limit in tenths of degrees Celsius. - CfgLhtcTemperatureLimit UINT16 ? ; < Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. - - CfgMemoryBusFrequencyLimit UINT32 ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType UINT32 ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode UINT32 ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect UINT32 ? ; < Timing Mode Select - CfgMemoryClockSelect UINT32 ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgAcpiPstatesPsdPolicy UINT32 ? ; < PSD policy - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - FchBldCfg POINTER ? ; < FCH platform build configuration policy - CfgIommuSupport BOOLEAN ? ; IOMMU support - CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported - CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings - CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode - CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - CfgExternalVrefCtlFeature BOOLEAN ? ; External Vref control - CfgForceTrainMode FORCE_TRAIN_MODE ? ; < Force Train Mode - CfgGnbRemoteDisplaySupport BOOLEAN ? ; Wireless Display Support - CfgIvrsExclusionRangeList POINTER ? ; IOMMU Exclusion Range List - CfgGnbSyncFloodPinAsNmi BOOLEAN ? ; Define function of NMI_SYNCFLOOD as NMI - CfgIgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy - CfgGnbSwTjOffset UINT8 ? ; Software-writeable TjOffset - CfgLvdsMiscVoltAdjustment UINT8 ? ; Register LVDS_CTRL_4 to adjust LVDS output voltage - CfgDisplayMiscControl DISPLAY_MISC_CONTROL {}; The Display Misc control - CfgDpFixedVoltSwingType DP_FIXED_VOLT_SWING_TYPE ? ;To indicate fixed voltage swing value - CfgDimmTypeUsedInMixedConfig TECHNOLOGY_TYPE ? ; Select the preferred technology type that AGESA will enable - ; when it is mixed with other technology types. - CfgHybridBoostEnable BOOLEAN ? ; HyBrid Boost support - CfgGnbIoapicAddress UINT64 ? ; GNB IOAPIC Base Address(NULL if platform configured) - CfgDataEyeEn BOOLEAN ? ; Enable get 2D data eye - CfgDockedTdpHeadroom BOOLEAN ? ; Configure Docked Tdp Headroom. - CfgDramDoubleRefreshRateEn BOOLEAN ? ; Double DRAM refresh rate - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionCrat BOOLEAN ? ; < When set to TRUE, the CRAT data table is generated. - UserOptionCdit BOOLEAN ? ; < When set to TRUE, the CDIT data table is generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - LowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < Deprecated in favor of PstatesPsdPolicy. - ; < P-State _PSD is forced independent. - PstatesPsdPolicy UINT32 ? ; < P-State _PSD policy - PStatesInHpcMode BOOLEAN ? ; < High performance computing (HPC) mode - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. - HtcTemperatureLimit UINT16 ? ; < The Hardware Thermal Control temperature limit in tenths of degrees Celsius. - ; < If equal to 0, use hardware defaults. - LhtcTemperatureLimit UINT16 ? ; < The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. - ; < If equal to 0, use hardware defaults. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - PROC_MANU_LENGTH EQU 29 - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version - T4ProcManufacturer CHAR8 (PROC_MANU_LENGTH) DUP (?) ; < Manufacturer -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. - ExtMaxCapacity UINT64 ? ; < The maximum memory capacity, in bytes, - ; < for this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Registered:1; ; < Registered (Buffered) -; OUT UINT16 Unbuffered:1; ; < Unbuffered (Unregistered) -; OUT UINT16 Reserved2:1; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - Handle UINT16 ? ; < The temporary handle, or instance number, associated with the structure - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 - for memory use -MEM_DMI_PHYSICAL_DIMM_INFO STRUCT - Socket UINT8 ? -; OUT UINT8 Socket:3 ; < Socket ID -; OUT UINT8 Channel:2 ; < Channel ID -; OUT UINT8 Dimm:2 ; < DIMM ID -; OUT UINT8 DimmPresent:1 ; < Dimm Present - Handle UINT16 ? ; < The temporary handle, or instance number, associated with the structure - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; < Serial Number. - PartNumber UINT8 (18) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -MEM_DMI_PHYSICAL_DIMM_INFO ENDS - - ; Memory DMI Type 20 - for memory use -MEM_DMI_LOGICAL_DIMM_INFO STRUCT - Socket UINT8 ? -; OUT UINT8 Socket:3 ; < Socket ID -; OUT UINT8 Channel:2 ; < Channel ID -; OUT UINT8 Dimm:2 ; < DIMM ID -; OUT UINT8 DimmPresent:1 ; < Dimm Present - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -MEM_DMI_LOGICAL_DIMM_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. - ExtEndingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_COMPUTE_UNIT_TWO EQU 5 ; < Level cores to two cores per compute unit - CORE_LEVEL_COMPUTE_UNIT_THREE EQU 6 ; < Level cores to three cores per compute unit - CORE_LEVEL_ONE EQU 7 ; < Level to 1 core - CORE_LEVEL_THREE EQU 8 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 9 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 10 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 11 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 12 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 13 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 14 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 15 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 16 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 17 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 18 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 19 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 20 ; < Level to 15 cores - CoreLevelModeMax EQU 21 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery - FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - GnbPostConfig GNB_POST_CONFIGURATION {} -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < GNB configuration - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics - GnbMidConfiguration GNB_MID_CONFIGURATION {} ; < GNB configuration - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table - AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table - AcpiCrat POINTER ? ; < Component Resource Affinity Table table - AcpiCdit POINTER ? ; < Component Locality Distance Information table - GnbLateConfiguration GNB_LATE_CONFIGURATION {} ; < GNB configuration -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - -; ********************************************************************* -; * Interface service call: AmdGet2DDataEye -; ********************************************************************* - ; Get 2D training data eye. - RD_DATAEYE EQU 0 ; < Request read 2D data eye training - WR_DATAEYE EQU 1 ; < Request write 2D data eye training - -AMD_GET_DATAEYE STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - PostParamsPtr POINTER ? ; < Post parameters structure. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. - DataEyeType UINT8 ? ; < The data eye type of training read/write. - DataEyeBuffer POINTER ? ; < Buffer to store data eye. -AMD_GET_DATAEYE ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_NV_DRAMCON EQU 0027h; < Specify the mode for controller initialization - AGESA_IDS_EXT_ID_END EQU 0028h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc deleted file mode 100644 index 9d2870b5a0..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc +++ /dev/null @@ -1,462 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; -; **************************************************************************** -; * - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; ************************************************************************** - - -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - AGESA_REVISION EQU "Arch2008" - AGESA_ID EQU "AGESA" - - LAST_ENTRY EQU 0FFFFFFFFh - IMAGE_SIGNATURE EQU 'DMA$' - IOCF8 EQU 0CF8h - IOCFC EQU 0CFCh - - ; The return status for all AGESA public services. - - ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK - ; will have log entries with more detail. - - AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. - AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. - ; < Not logged. - AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. - ; < Example, memory address not installed, heap buffer handle not found. - ; < Not Logged. - ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. - AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. - ; < See log. Example, HT CRC. - AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. - AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. - AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. - AGESA_FATAL EQU 7 ; < Halt booting. See Log. - AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. -AGESA_STATUS TEXTEQU <DWORD> - -; For checking whether a status is at or above the mandatory log level. -AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT - - CALLOUT_ENTRY TEXTEQU <POINTER> - IMAGE_ENTRY TEXTEQU <POINTER> - MODULE_ENTRY TEXTEQU <POINTER> - -; This allocation type is used by the AmdCreateStruct entry point - PreMemHeap EQU 0 ; < Create heap in cache. - PostMemDram EQU 1 ; < Create heap in memory. - ByHost EQU 2 ; < Create heap by Host. -ALLOCATION_METHOD TEXTEQU <DWORD> - - ; These width descriptors are used by the library function, and others, to specify the data size - AccessWidth8 EQU 1 ; < Access width is 8 bits. - AccessWidth16 EQU 2 ; < Access width is 16 bits. - AccessWidth32 EQU 3 ; < Access width is 32 bits. - AccessWidth64 EQU 4 ; < Access width is 64 bits. - - AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. - AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. - AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. - AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. -ACCESS_WIDTH TEXTEQU <DWORD> - - ; AGESA struct name - - ; AGESA BASIC FUNCTIONS - AMD_INIT_RECOVERY EQU 00020000h - AMD_CREATE_STRUCT EQU 00020001h - AMD_INIT_EARLY EQU 00020002h - AMD_INIT_ENV EQU 00020003h - AMD_INIT_LATE EQU 00020004h - AMD_INIT_MID EQU 00020005h - AMD_INIT_POST EQU 00020006h - AMD_INIT_RESET EQU 00020007h - AMD_INIT_RESUME EQU 00020008h - AMD_RELEASE_STRUCT EQU 00020009h - AMD_S3LATE_RESTORE EQU 0002000Ah - AMD_S3_SAVE EQU 0002000Bh - AMD_GET_APIC_ID EQU 0002000Ch - AMD_GET_PCI_ADDRESS EQU 0002000Dh - AMD_IDENTIFY_CORE EQU 0002000Eh - AMD_READ_EVENT_LOG EQU 0002000Fh - AMD_GET_EXECACHE_SIZE EQU 00020010h - AMD_LATE_RUN_AP_TASK EQU 00020011h - AMD_IDENTIFY_DIMMS EQU 00020012h - AMD_GET_2D_DATA_EYE EQU 00020013h -AGESA_STRUCT_NAME TEXTEQU <DWORD> - - - ; ResetType constant values - WARM_RESET_WHENEVER EQU 1 - COLD_RESET_WHENEVER EQU 2 - WARM_RESET_IMMEDIATELY EQU 3 - COLD_RESET_IMMEDIATELY EQU 4 - - - ; AGESA Structures - - ; The standard header for all AGESA services. -AMD_CONFIG_PARAMS STRUCT - ImageBasePtr UINT32 ? ; < The AGESA Image base address. - Func UINT32 ? ; < The service desired, @sa dispatch.h. - AltImageBasePtr UINT32 ? ; < Alternate Image location - CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA - HeapStatus UINT8 ? ; < For heap status from boot time slide. - HeapBasePtr UINT64 ? ; < Location of the heap - Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. -AMD_CONFIG_PARAMS ENDS - - - ; Create Struct Interface. -AMD_INTERFACE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Config header - AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h - AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation - NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. - NewStructPtr POINTER ? ; < The struct for the service. - ; < The struct to init for ByHost allocation, - ; < the initialized struct on return. -AMD_INTERFACE_PARAMS ENDS - - FUNC_0 EQU 0 ; bit-placed for PCI address creation - FUNC_1 EQU 1 - FUNC_2 EQU 2 - FUNC_3 EQU 3 - FUNC_4 EQU 4 - FUNC_5 EQU 5 - FUNC_6 EQU 6 - FUNC_7 EQU 7 - - ; AGESA Binary module header structure -AMD_IMAGE_HEADER STRUCT - Signature UINT32 ? ; < Binary Signature - CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID - Version CHAR8 (12) DUP (?) ; < 12 characters version - ModuleInfoOffset UINT32 ? ; < Offset of module - EntryPointAddress UINT32 ? ; < Entry address - ImageBase UINT32 ? ; < Image base - RelocTableOffset UINT32 ? ; < Relocate Table offset - ImageSize UINT32 ? ; < Size - Checksum UINT16 ? ; < Checksum - ImageType UINT8 ? ; < Type - V_Reserved UINT8 ? ; < Reserved -AMD_IMAGE_HEADER ENDS - ; AGESA Binary module header structure -AMD_MODULE_HEADER STRUCT - ModuleHeaderSignature UINT32 ? ; < Module signature - ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID - ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version - ModuleDispatcher POINTER ? ; < A pointer point to dispatcher - NextBlock POINTER ? ; < Next module header link -AMD_MODULE_HEADER ENDS - -; AMD_CODE_HEADER Signatures. -AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', '!', 'A', 'G', 'E', 'S', 'A'> -CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> -CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> - -; AGESA_CODE_SIGNATURE -AMD_CODE_HEADER STRUCT - Signature CHAR8 (8) DUP (?) ; < code header Signature - ComponentName CHAR8 (16) DUP (?) ; < 16 character name of the code module - Version CHAR8 (12) DUP (?) ; < 12 character version string - TerminatorNull CHAR8 ? ; < null terminated string - VerReserved CHAR8 (7) DUP (?) ; < reserved space -AMD_CODE_HEADER ENDS - - ; Extended PCI address format -EXT_PCI_ADDR STRUCT - Register UINT32 ? -; IN OUT UINT32 Register:12; ; < Register offset -; IN OUT UINT32 Function:3; ; < Function number -; IN OUT UINT32 Device:5; ; < Device number -; IN OUT UINT32 Bus:8; ; < Bus number -; IN OUT UINT32 Segment:4; ; < Segment -EXT_PCI_ADDR ENDS - - ; Union type for PCI address -PCI_ADDR UNION - AddressValue UINT32 ? ; < Formal address - Address EXT_PCI_ADDR {} ; < Extended address -PCI_ADDR ENDS - - ; SBDFO - Segment Bus Device Function Offset - ; 31:28 Segment (4-bits) - ; 27:20 Bus (8-bits) - ; 19:15 Device (5-bits) - ; 14:12 Function(3-bits) - ; 11:00 Offset (12-bits) - - - - ILLEGAL_SBDFO EQU 0FFFFFFFFh - - ; CPUID data received registers format -CPUID_DATA STRUCT - EAX_Reg UINT32 ? ; < CPUID instruction result in EAX - EBX_Reg UINT32 ? ; < CPUID instruction result in EBX - ECX_Reg UINT32 ? ; < CPUID instruction result in ECX - EDX_Reg UINT32 ? ; < CPUID instruction result in EDX -CPUID_DATA ENDS - - ; HT frequency for external callbacks -;typedef enum { - HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks - HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks - HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks - HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks - HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks - HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks - HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks - HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks - HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks - HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks - HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks - HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks - HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks - HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks - HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks - HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks - HT_FREQUENCY_MAX EQU 20 ; < Limit Check. -HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; - -HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M - -IFNDEF BIT0 - BIT0 EQU 0000000000000001h -ENDIF -IFNDEF BIT1 - BIT1 EQU 0000000000000002h -ENDIF -IFNDEF BIT2 - BIT2 EQU 0000000000000004h -ENDIF -IFNDEF BIT3 - BIT3 EQU 0000000000000008h -ENDIF -IFNDEF BIT4 - BIT4 EQU 0000000000000010h -ENDIF -IFNDEF BIT5 - BIT5 EQU 0000000000000020h -ENDIF -IFNDEF BIT6 - BIT6 EQU 0000000000000040h -ENDIF -IFNDEF BIT7 - BIT7 EQU 0000000000000080h -ENDIF -IFNDEF BIT8 - BIT8 EQU 0000000000000100h -ENDIF -IFNDEF BIT9 - BIT9 EQU 0000000000000200h -ENDIF -IFNDEF BIT10 - BIT10 EQU 0000000000000400h -ENDIF -IFNDEF BIT11 - BIT11 EQU 0000000000000800h -ENDIF -IFNDEF BIT12 - BIT12 EQU 0000000000001000h -ENDIF -IFNDEF BIT13 - BIT13 EQU 0000000000002000h -ENDIF -IFNDEF BIT14 - BIT14 EQU 0000000000004000h -ENDIF -IFNDEF BIT15 - BIT15 EQU 0000000000008000h -ENDIF -IFNDEF BIT16 - BIT16 EQU 0000000000010000h -ENDIF -IFNDEF BIT17 - BIT17 EQU 0000000000020000h -ENDIF -IFNDEF BIT18 - BIT18 EQU 0000000000040000h -ENDIF -IFNDEF BIT19 - BIT19 EQU 0000000000080000h -ENDIF -IFNDEF BIT20 - BIT20 EQU 0000000000100000h -ENDIF -IFNDEF BIT21 - BIT21 EQU 0000000000200000h -ENDIF -IFNDEF BIT22 - BIT22 EQU 0000000000400000h -ENDIF -IFNDEF BIT23 - BIT23 EQU 0000000000800000h -ENDIF -IFNDEF BIT24 - BIT24 EQU 0000000001000000h -ENDIF -IFNDEF BIT25 - BIT25 EQU 0000000002000000h -ENDIF -IFNDEF BIT26 - BIT26 EQU 0000000004000000h -ENDIF -IFNDEF BIT27 - BIT27 EQU 0000000008000000h -ENDIF -IFNDEF BIT28 - BIT28 EQU 0000000010000000h -ENDIF -IFNDEF BIT29 - BIT29 EQU 0000000020000000h -ENDIF -IFNDEF BIT30 - BIT30 EQU 0000000040000000h -ENDIF -IFNDEF BIT31 - BIT31 EQU 0000000080000000h -ENDIF -IFNDEF BIT32 - BIT32 EQU 0000000100000000h -ENDIF -IFNDEF BIT33 - BIT33 EQU 0000000200000000h -ENDIF -IFNDEF BIT34 - BIT34 EQU 0000000400000000h -ENDIF -IFNDEF BIT35 - BIT35 EQU 0000000800000000h -ENDIF -IFNDEF BIT36 - BIT36 EQU 0000001000000000h -ENDIF -IFNDEF BIT37 - BIT37 EQU 0000002000000000h -ENDIF -IFNDEF BIT38 - BIT38 EQU 0000004000000000h -ENDIF -IFNDEF BIT39 - BIT39 EQU 0000008000000000h -ENDIF -IFNDEF BIT40 - BIT40 EQU 0000010000000000h -ENDIF -IFNDEF BIT41 - BIT41 EQU 0000020000000000h -ENDIF -IFNDEF BIT42 - BIT42 EQU 0000040000000000h -ENDIF -IFNDEF BIT43 - BIT43 EQU 0000080000000000h -ENDIF -IFNDEF BIT44 - BIT44 EQU 0000100000000000h -ENDIF -IFNDEF BIT45 - BIT45 EQU 0000200000000000h -ENDIF -IFNDEF BIT46 - BIT46 EQU 0000400000000000h -ENDIF -IFNDEF BIT47 - BIT47 EQU 0000800000000000h -ENDIF -IFNDEF BIT48 - BIT48 EQU 0001000000000000h -ENDIF -IFNDEF BIT49 - BIT49 EQU 0002000000000000h -ENDIF -IFNDEF BIT50 - BIT50 EQU 0004000000000000h -ENDIF -IFNDEF BIT51 - BIT51 EQU 0008000000000000h -ENDIF -IFNDEF BIT52 - BIT52 EQU 0010000000000000h -ENDIF -IFNDEF BIT53 - BIT53 EQU 0020000000000000h -ENDIF -IFNDEF BIT54 - BIT54 EQU 0040000000000000h -ENDIF -IFNDEF BIT55 - BIT55 EQU 0080000000000000h -ENDIF -IFNDEF BIT56 - BIT56 EQU 0100000000000000h -ENDIF -IFNDEF BIT57 - BIT57 EQU 0200000000000000h -ENDIF -IFNDEF BIT58 - BIT58 EQU 0400000000000000h -ENDIF -IFNDEF BIT59 - BIT59 EQU 0800000000000000h -ENDIF -IFNDEF BIT60 - BIT60 EQU 1000000000000000h -ENDIF -IFNDEF BIT61 - BIT61 EQU 2000000000000000h -ENDIF -IFNDEF BIT62 - BIT62 EQU 4000000000000000h -ENDIF -IFNDEF BIT63 - BIT63 EQU 8000000000000000h -ENDIF - diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc deleted file mode 100644 index 4e55a57f5c..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc +++ /dev/null @@ -1,576 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; -; **************************************************************************** -; - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -PARAM1 textequ <[bp+8]> -PARAM2 textequ <[bp+12]> -PARAM3 textequ <[bp+16]> -RETAddress textequ <[bp+4]> - -AMD_PRIVATE_PARAMS STRUCT - Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 - Gate16_SS DW ? ; RM stack segment - Router_Seg DW ? ; Segment of oem router - Router_Off DW ? ; Offset of oem router -AMD_PRIVATE_PARAMS ENDS - -; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. -IFNDEF AGESA_SELECTOR_GDT - AGESA_SELECTOR_GDT EQU 00h -ENDIF -IFNDEF AGESA_SELECTOR_CODE16 - AGESA_SELECTOR_CODE16 EQU 08h -ENDIF -IFNDEF AGESA_SELECTOR_DATA16 - AGESA_SELECTOR_DATA16 EQU 10h -ENDIF -IFNDEF AGESA_SELECTOR_CODE32 - AGESA_SELECTOR_CODE32 EQU 18h -ENDIF -IFNDEF AGESA_SELECTOR_DATA32 - AGESA_SELECTOR_DATA32 EQU 20h -ENDIF - - -AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ - - GDT_Name LABEL BYTE - DD 000000000h, 000000000h ; NULL descriptor - DD 00000ffffh, 000009b00h ; 16-bit code, fixed up - DD 00000ffffh, 000009300h ; 16-bit data, fixed up - DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code - DD 00000ffffh, 000CF9300h ; 32-bit protected mode data - GDT_Length EQU ($-GDT_Name) - -ENDM - -;+------------------------------------------------------------------------- -; -; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter 32bit Protected Mode (PM32) -; 2) Run AGESA code -; 3) Restore Real Mode (RM) -; -; Entry: -; [big real mode] : ds, es set to base 0 limit 4G segment -; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) -; ESI - configuration block pointer -; -; Exit: -; EAX - return value -; ESI - configuration block pointer -; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode -; -; Modified: -; None -; - -AMD_BRIDGE_32 MACRO GDT_Name - - local copyGDT - local flushTo16PM - local agesaReturnAddress - local leave32bitPM - local flush2RM - - push gs - push fs - push ebx - push ecx - push edi - mov eax, esp - push eax - movzx esp, sp -; -; Do not use any locals here, BP will be changed frequently during RM->PM32->RM -; - pushf - cli ; Disable interrupts during AGESA - cld ; Need known direction flag during AGESA - -; -; Save the FAR PTR input parameter -; - mov gs, dx ; Offset - shr edx, 16 - mov fs, dx ; Segment -; -; Determine where our binary file is and get entry point -; - mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr - add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress -; -; Figure out the return address we will use after calling AGESA -; and store it in ebx until we have our stack set up properly -; - mov ebx, cs - shl ebx, 4 - add ebx, OFFSET agesaReturnAddress -; -; Save our current RM stack AND entry EBP -; - push ebp -; push esp - push ss - -; -; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN -; -; Copy the GDT onto the stack for modification -; - mov cx, GDT_Length - sub sp, cx - mov bp, sp - lea di, GDT_Name -copyGDT: - mov al, cs:[di] - mov [bp], al - inc di - inc bp - loop copyGDT -; -; Patch 16-bit code and data descriptors on stack. We will -; fix up CS and SS for PM16 during the callout if applicable. -; - mov bp, sp - - mov eax, cs - shl eax, 4 - mov [bp+AGESA_SELECTOR_CODE16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_CODE16+4], al - - mov eax, ss - shl eax, 4 - mov [bp+AGESA_SELECTOR_DATA16+2], ax - shr eax, 16 - mov [bp+AGESA_SELECTOR_DATA16+4], al -; -; Need to place Length and Address on GDT -; - mov eax, ss - shl eax, 4 - add eax, esp - push eax - push WORD PTR (GDT_Length-1) -; -; Load the GDT -; - mov bp, sp - lgdt FWORD PTR [bp] -; -; TABLE 1 -; -; Place PRIVATE DATA on stack DIRECTLY following GDT -; During this routine, stack data is critical. If -; order is changed or additional added, bad things -; will happen! -; -; HIGHEST PHYSICAL ADDRESS -; -; | ... | -; ------------------------ -; | old RM SP | -; | old RM SS | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) -; | GDT_DATA32 | -; | ... | -; | GDT_NULL | -; | GDT Addr, Length | -; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS -; | Priv.Gate16_SS | -; | Priv.Gate16_CS | -; ------------------------ sp -; ------ THEN PUSH ------- -; | Return to 16-bit CS | -; | Return to 16-bit Off | -; | ... | -; -; LOWEST PHYSICAL ADDRESS -; - mov edi, esp - sub edi, SIZEOF AMD_PRIVATE_PARAMS - mov ax, cs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax - mov ax, ss - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs - mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs - - mov esp, edi -; -; Save an address for returning to 16 bit real mode on stack, -; we'll use it in a far ret after turning off CR0.PE so that -; we can take our address off and force a far jump. Be sure -; no unexpected data is on the stack after this! -; - mov ax, cs - push cs - lea ax, flush2RM - push ax -; -; Convert ss:esp to "flat" -; - - mov ax, sp - push ax - mov eax, ss - shl eax, 4 - add eax, esp - mov esp, eax ; Load the zero based ESP - -; -; Set CR0.PE -; - mov eax, CR0 ; Get CPU control word 0 - or al, 01 ; Enable CPU protected mode - mov CR0, eax ; Write back to CPU control word 0 - jmp flushTo16PM - -flushTo16PM: -; -; 16-bit protected mode -; - mov ax, AGESA_SELECTOR_DATA32 - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax - mov ss, ax -; -; Push our parameters RIGHT TO LEFT, and then return address -; - push esi ; AGESA configuration block pointer (data) - push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret - pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) - push edx ; AGESA entry point (32PM flat) - - DB 066h - retf ; <><><> Enter AGESA 32-bit code!!! <><><> - -agesaReturnAddress: -; -; Returns from the Agesa 32-bit code still PM32 -; - DB 0EAh - DD OFFSET leave32bitPM - DW AGESA_SELECTOR_CODE16 - -leave32bitPM: -; -; Now in 16-bit PM -; - add esp, 4 ; +4 to remove our config block pointer -; -; Eax reserve AGESA_STATUS return code, save it -; - mov ebx, eax -; -; Turn off CR0.PE, restore 64K stack limit -; - pop ax - mov sp, ax - mov ax, AGESA_SELECTOR_DATA16 - mov ss, ax - - mov eax, CR0 - and al, NOT 1 ; Disable protected mode - mov CR0, eax ; Write back CR0.PE -; -; Jump far to enter RM, we saved this address on the stack -; already. Hopefully stack is balanced through AGESA -; nor were any params added by pushing them on the stack and -; not removing them between BEGIN-END comments. -; - retf - -flush2RM: -; -; Set segments registers for big real mode before returning -; - xor ax, ax - mov ds, ax - mov es, ax - mov fs, ax - mov gs, ax -; -; Discard GDT, +6 for GDT pointer/size, privates -; - add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS -; -; Restore real mode stack and entry EBP -; - pop cx -; mov esp, [esp] - mov ss, cx - pop ebp -; -; Restore AGESA_STATUS return code to eax -; - mov eax, ebx -; -; END --- STACK MUST BE BALANCED TO THIS POINT --- END -; - - popf - pop ebx - mov esp, ebx - pop edi - pop ecx - pop ebx - pop fs - pop gs - ; EXIT AMD_BRIDGE_32 -ENDM -;+------------------------------------------------------------------------- -; -; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface -; -; Processing: -; The following steps are taken: -; 1) Enter PM16 -; 2) Setup stack, get private params -; 3) Enter RM -; 4) Get 3 params -; 5) Call oemCallout OR oem router -; 6) Enter PM32 -; 7) Return to Agesa PH -; -; Entry: -; [32-bit protected mode] -; [esp+8] Func -; [esp+12] Data -; [esp+16] Configuration Block -; [esp+4] return address to Agesa -; -; Exit: -; [32-bit protected mode] -; -; Modified: -; None -; -AMD_CALLOUT_16 MACRO LocalOemCalloutRouter -; -; Note that we are still PM32, so MASM may work strangely -; - - push bp ; Save our original SP to access params - mov bp, sp - push bx - push si - push di - push cx - push dx - push di - - DB 066h, 0EAh - DW OFFSET PM16Entry - DW AGESA_SELECTOR_CODE16 - -PM16Entry: -; -; PM16 CS, but still PM32 SS, as we need to access our private params -; before we enter RM. -; -; Note: we are working below the stack temporarily, and and it will -; not affect our ability to get entry params -; - xor ecx, ecx - xor edx, edx -; -; SGDT will give us the original location of the GDT on our CAS stack. -; We need this value because our private parameters are located just -; below the GDT. -; - mov edi, esp - sub edi, GDT_Length + 6 - sgdt FWORD PTR [edi] ; [edi] = word size, dword address - mov edi, DWORD PTR [edi+2] ; Get the PM32 address only - sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 -; -; cx = code segment of this code in RM -; dx = stack segment of CAS in RM -; fs = code segment of oem router (save for later) -; gs = offset of oem router (save for later) -; fs and gs are loaded after switch to real mode because we can't -; use them as scratch pad registers in protected mode -; - mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS - mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS - - mov eax, edi ; Save edi in eax for after RM switch - mov edi, esp ; Save our current ESP for RM - - movzx ebx, dx - shl ebx, 4 - sub esp, ebx - -; -; We had been accessing the stack in PM32, we will now change to PM16 so we -; will make the stack segment 64KB limit so SP needs to be fixed made PM16 -; compatible. -; - mov bx, AGESA_SELECTOR_DATA16 - mov ss, bx - -; -; Save the RM segment and RM offset of the jump we will need to make in -; order to enter RM so that code in this segment is relocatable. -; -; BEGIN --- Don't unbalance the stack --- BEGIN -; - push cx - pushw OFFSET RMEntry - - mov ebx, CR0 - and bl, NOT 1 - mov CR0, ebx ; CR0.PE cleared -; -; Far jump to clear segment descriptor cache and enter RM -; - retf - -RMEntry: -; -; We are in RM, setup RM stack -; - movzx ebx, dx ; Get RM SS in ebx - shl ebx, 4 ; Get our stack top on entry in EBP to - sub ebp, ebx ; access our entry parameters - sub eax, ebx ; save copy of parameters address - mov ss, dx ; Set stack segment -; -; We are going to figure out the address to use when we return -; and have to go back into PM32 while we have access to it -; - movzx ebx, cx ; Get original CS in ebx - shl ebx, 4 - add ebx, OFFSET PM32Entry -; -; Now we put our data, func, block params into calling convention -; for our hook -; -; ECX = Func -; EDX = Data -; ESI = config pointer -; - mov ecx, PARAM1 ; Func - mov edx, PARAM2 ; Data - mov esi, PARAM3 ; pointer - - push ebx ; Save PM32 mode switch address - push edi ; Save PM32 stack pointer - pushf -; -; Get Router Function Address -; - mov edi, eax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg - mov fs, ax - mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off - mov gs, ax - - mov eax, AGESA_UNSUPPORTED ; Default return value -; -; If AMD_BRIDGE_32 EDX == 0 call oemCallout -; otherwise call FAR PTR EDX -; -; Critical: -; sp+2 - EDI aka PM32 stack address -; sp+4 - address of PM32Entry in PM32 -; - mov bx, fs - shl ebx, 16 - mov bx, gs - - .if (ebx == 0) - call LocalOemCalloutRouter - .else -; -; Make far call to Router function -; - push cs - push offset CalloutReturn - push ebx - retf -CalloutReturn: - .endif -; -; Restore PM32 esp from RM stack -; - popf - pop edi ; Our PM32 stack pointer - pop edx ; Our PM32 mode switch address - - mov ebx, CR0 - or bl, 1 ; CR0.PE set - mov CR0, ebx - - mov ebx, AGESA_SELECTOR_DATA32 - pushd AGESA_SELECTOR_CODE32 ; PM32 selector - push edx ; PM32 entry point - - DB 066h - retf ; Far jump to enter PM32 - -PM32Entry: -; -; END --- Don't unbalance the stack --- END -; We are now PM32, so remember MASM is assembling in 16-bit again -; - mov ss, bx - mov ds, bx - mov es, bx - mov fs, bx - mov gs, bx - - mov sp, di - pop di - pop dx - pop cx - pop di - pop si - pop bx - pop bp - ; EXIT AMD_CALLOUT_16 -ENDM diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm deleted file mode 100644 index 6d2c0b1362..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm +++ /dev/null @@ -1,335 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 32bit -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; */ -;***************************************************************************** -; - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -.586p -.model flat -ASSUME FS:NOTHING -.code -public IdsDelay -IdsDelay PROC NEAR C USES EAX EDX -Local targetedx:dword, targeteax:dword - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - mov targetedx,edx - mov targeteax,eax - - rdtsc -;set "Si!=0" skip below loop - .while(1) - .if(si != 0) - jmp delay_exit - .endif - .if(edx > targetedx) - jmp delay_exit - .elseif (edx == targetedx) - .if(eax > targeteax) - jmp delay_exit - .endif - .endif - rdtsc - .endw -delay_exit: - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC NEAR C filecode:dword -local tmpebx:dword,tmpedx:dword - pushad - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, filecode - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov ebx,0dead0000h - mov edx,filecode - ror edx,16 - mov bx,dx - mov dx,0 -;ebx:edx = deadxxxxyyyy0000 xxxx is the filecode yyyy is the line num - mov tmpebx,ebx - mov tmpedx,edx - - xor eax,eax - mov cl,6 - - .while((cl != 0) && (si == 0)) - .if(cl <= 2) - shld eax,edx,8 - shl edx,8 - .else - shld eax,ebx,8 - shl ebx,8 - .endif - - out 80h,eax - call IdsDelay - dec cl - .if(cl == 0) - mov cl,6 - mov ebx,tmpebx - mov edx,tmpedx - .endif - .endw - - popad - xor eax,eax - ret -IdsErrorStop endp - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ -IDS_STOP_HERE MACRO -@@: - jmp short @b -ENDM - -;====================================================================== -; IdsExceptionHandler: Simply performs a jmp $ and IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC _IdsExceptionHandler -PUBLIC _SizeIdtDescriptor -PUBLIC _SizeTotalIdtDescriptors - -; Size of each exception MUST be the same -Exception00: - push eax - mov al, 00h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception01: - push eax - mov al, 01h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception02: - push eax - mov al, 02h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception03: - push eax - mov al, 03h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception04: - push eax - mov al, 04h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception05: - push eax - mov al, 05h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception06: - push eax - mov al, 06h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception07: - push eax - mov al, 07h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception08: - push eax - mov al, 08h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception09: - push eax - mov al, 09h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception10: - push eax - mov al, 10h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception11: - push eax - mov al, 11h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception12: - push eax - mov al, 12h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception13: - push eax - mov al, 13h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception14: - push eax - mov al, 14h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception15: - push eax - mov al, 15h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception16: - push eax - mov al, 16h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception17: - push eax - mov al, 17h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception18: - push eax - mov al, 18h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception19: - push eax - mov al, 19h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception20: - push eax - mov al, 20h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception21: - push eax - mov al, 21h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception22: - push eax - mov al, 22h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception23: - push eax - mov al, 23h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception24: - push eax - mov al, 24h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception25: - push eax - mov al, 25h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception26: - push eax - mov al, 26 - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception27: - push eax - mov al, 27h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception28: - push eax - mov al, 28h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception29: - push eax - mov al, 29h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception30: - push eax - mov al, 30h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception31: - push eax - mov al, 31h - jmp near ptr CommonHandler -CommonHandler: - out 80h, al - pop eax - IDS_STOP_HERE - iretd - -_IdsExceptionHandler dq offset Exception00 -_SizeIdtDescriptor dd (offset Exception01 - offset Exception00) -_SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00) - -END diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm deleted file mode 100644 index a6a97a2680..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm +++ /dev/null @@ -1,342 +0,0 @@ -;/** -; * @file -; * -; * Ids Assembly library 64bit -; * -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: IDS -; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; */ -;***************************************************************************** -; - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** - -.code -IdsDelay PROC - push rax - push rdx - push rbx - xor rax,rax - xor rdx,rdx - rdtsc -;set target time - add eax,1500000000 - adc edx,0 - shl rdx,32 - add rdx,rax - mov rbx,rdx -;rbx store the target -;set "Si!=0" skip below loop -__loop: - cmp si,0 - jnz __loopexit - rdtsc - shl rdx,32 - add rdx,rax - cmp rdx,rbx - jae __loopexit - jmp __loop -__loopexit: - pop rbx - pop rdx - pop rax - ret -IdsDelay ENDP -;/*++ -; -;Routine Description: -; -; IdsErrorStop -- Function for Assert -; -;Arguments: -; Filecode -; -;Returns: -; -; None -; -;--*/ -public IdsErrorStop -IdsErrorStop PROC -;As x64 calling convention RCX is used as input parameters - push rcx - push rbx - push si - push dx - push rbx - - mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop -; send debug port 1st, then fire SimNow breakpoint - mov ax, 0deadh - out 0e0h, ax - mov eax, ecx - out 84h, eax - mov eax, 0BACCD00Bh ; Backdoor in SimNow - mov ebx, 2 ; Select breakpoint feature - cpuid - - mov rax,0dead00000000h - or rcx,rax -;rcx= 0dead__FILECODE - shl rcx,16 -;rcx= 0dead__FILECODE__0000 - mov rbx,rcx - - xor rax,rax - mov dl,6 - -IdsErrorStopLoop: - cmp dl,0 - jz IdsErrorStopExit - cmp si,0 - jnz IdsErrorStopExit - - shld rax,rcx,8 - shl rcx,8 - out 80h,eax - call IdsDelay - - dec dl - cmp dl,0 - jnz _nextloop - mov dl,6 - mov rcx,rbx -_nextloop: - jmp IdsErrorStopLoop -IdsErrorStopExit: - pop rbx - pop dx - pop si - pop rbx - pop rcx - xor rax,rax - ret -IdsErrorStop endp - -;/*---------------------------------------------------------------------------------------*/ -;/** -; * Stop CPU -; * -; * -; * -; */ -IDS_STOP_HERE MACRO -@@: - jmp short @b -ENDM - -;====================================================================== -; IdsExceptionHandler: Simply performs a jmp $ and IRET. -; -; In: -; None -; -; Out: -; None -; -; Destroyed: -; None -; -;====================================================================== -PUBLIC IdsExceptionHandler -PUBLIC SizeIdtDescriptor -PUBLIC SizeTotalIdtDescriptors - -; Size of each exception MUST be the same -Exception00: - push rax - mov al, 00h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception01: - push rax - mov al, 01h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception02: - push rax - mov al, 02h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception03: - push rax - mov al, 03h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception04: - push rax - mov al, 04h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception05: - push rax - mov al, 05h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception06: - push rax - mov al, 06h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception07: - push rax - mov al, 07h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception08: - push rax - mov al, 08h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception09: - push rax - mov al, 09h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception10: - push rax - mov al, 10h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception11: - push rax - mov al, 11h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception12: - push rax - mov al, 12h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception13: - push rax - mov al, 13h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception14: - push rax - mov al, 14h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception15: - push rax - mov al, 15h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception16: - push rax - mov al, 16h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception17: - push rax - mov al, 17h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception18: - push rax - mov al, 18h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception19: - push rax - mov al, 19h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception20: - push rax - mov al, 20h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception21: - push rax - mov al, 21h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception22: - push rax - mov al, 22h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception23: - push rax - mov al, 23h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception24: - push rax - mov al, 24h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception25: - push rax - mov al, 25h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception26: - push rax - mov al, 26 - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception27: - push rax - mov al, 27h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception28: - push rax - mov al, 28h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception29: - push rax - mov al, 29h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception30: - push rax - mov al, 30h - jmp near ptr CommonHandler -; Size of each exception MUST be the same -Exception31: - push rax - mov al, 31h - jmp near ptr CommonHandler -CommonHandler: - out 80h, al - pop rax - IDS_STOP_HERE - iretq - -IdsExceptionHandler dq offset Exception00 -SizeIdtDescriptor dd (offset Exception01 - offset Exception00) -SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00) - -END - diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm deleted file mode 100644 index 8f14379b42..0000000000 --- a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm +++ /dev/null @@ -1,496 +0,0 @@ -;***************************************************************************** -; AMD Generic Encapsulated Software Architecture -; -; $Workfile:: mu.asm $ $Revision:: 841#$ $Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ -; Description: Main memory controller system configuration for AGESA -; -; -;***************************************************************************** -; - * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;***************************************************************************** -;============================================================================ - - - .XLIST - .LIST - - .686p - .MODEL FLAT - .CODE - ASSUME FS: NOTHING - -; Define the calling convention used for the C library modules -;@attention - This should be in a central include file -CALLCONV EQU NEAR C - - -;=============================================================================== -;memUOutPort: -; -; Do a 32 Bit IO Out operation using edx. -; NOTE: This function will be obsolete in the future. -; -; In: Port - port number -; Value - value to be written -; -; Out: -; -; All registers preserved. -;=============================================================================== -MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD - pushad - mov edx,Port - mov eax,Value - out dx,al - popad - ret -MemUOutPort ENDP - - -;---------------------------------------------------------------------------- -; _SFENCE(); -; -_SFENCE macro - db 0Fh,0AEh,0F8h - endm - -;---------------------------------------------------------------------------- -; _MFENCE(); -; -_MFENCE macro - db 0Fh,0AEh,0F0h - endm - -;---------------------------------------------------------------------------- -; _EXECFENCE(); -; -_EXECFENCE macro - out 0EDh,al ;prevent speculative execution of following instructions - endm - -;=============================================================================== -;MemUWriteCachelines: -; Write a test pattern to DRAM -; -; In: Pattern - pointer to the write pattern -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD - pushad - push ds - - mov eax,Address - push ss - pop ds - xor edx,edx - mov edx, DWORD PTR Pattern - mov esi,edx - mov edx,16 - _EXECFENCE - xor ecx, ecx - mov cx,ClCount - shl ecx,2 - @@: - db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi] - db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits) - add eax,edx - add esi,edx - loop @B - - pop ds - popad - ret -MemUWriteCachelines ENDP - -;=============================================================================== -;MemUReadCachelines: -; -; Read a pattern of 72 bit times (per DQ), to test dram functionality. The -;pattern is a stress pattern which exercises both ISI and crosstalk. The number -;of cache lines to fill is dependent on DCT width mode and burstlength. -; -; In: Buffer - pointer to a buffer where read data will be stored -; Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL Count:BYTE - pushad - ; First, issue continuous dummy reads to fill up the cache - mov eax,Address - .if (ClCount > 18) - mov cx,ClCount - shr cx,4 - mov Count,cl - .while (Count != 0) - push eax - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - pop eax - add eax,(16*64) ;Next 16CL - dec Count - .endw - .else - mov edi,eax - add edi,128 ;bias value (to account for signed displacement) - ;clflush opcode=0F AE /7 - mov esi,edi - mov ebx,esi - mov ecx,esi - mov edx,esi - add edi,4*64 ;TestAddr+4 cache lines - add ebx,8*64 ;TestAddr+8 cache lines - add ecx,12*64 ;TestAddr+12 cache lines - add edx,16*64 ;TestAddr+16 cache lines - sub edx,128 - .if(ClCount == 1) - _MFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - .elseif(ClCount == 3) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - .elseif(ClCount == 6) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - .elseif(ClCount == 9) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - .elseif(ClCount == 18) - _EXECFENCE - mov eax,fs:[esi-128] ;TestAddr - _MFENCE - mov eax,fs:[esi-64] ;TestAddr+1 cache line - _MFENCE - mov eax,fs:[esi] ;TestAddr+2 cache lines - _MFENCE - mov eax,fs:[esi+64] ;TestAddr+3 cache lines - _MFENCE - mov eax,fs:[edi-128] ;TestAddr+4 cache lines - _MFENCE - mov eax,fs:[edi-64] ;TestAddr+5 cache lines - _MFENCE - mov eax,fs:[edi] ;TestAddr+6 cache lines - _MFENCE - mov eax,fs:[edi+64] ;TestAddr+7 cache lines - _MFENCE - mov eax,fs:[ebx-128] ;TestAddr+8 cache lines - _MFENCE - mov eax,fs:[ebx-64] ;TestAddr+9 cache lines - _MFENCE - mov eax,fs:[ebx] ;TestAddr+10 cache lines - _MFENCE - mov eax,fs:[ebx+64] ;TestAddr+11 cache lines - _MFENCE - mov eax,fs:[ecx-128] ;TestAddr+12 cache lines - _MFENCE - mov eax,fs:[ecx-64] ;TestAddr+13 cache lines - _MFENCE - mov eax,fs:[ecx] ;TestAddr+14 cache lines - _MFENCE - mov eax,fs:[ecx+64] ;TestAddr+15 cache lines - _MFENCE - mov eax,fs:[edx] ;TestAddr+16 cache lines - _MFENCE - mov eax,fs:[edx+64] ;TestAddr+17 cache lines - _MFENCE - .endif - .endif - _MFENCE - - ; Then, copy data to buffer - mov esi,Address - xor edx,edx - mov edx,DWORD PTR Buffer - mov edi,edx - xor ecx, ecx - mov cx,ClCount - shl ecx,6 - @@: - mov al,fs:[esi] - mov ss:[edi],al - inc esi - inc edi - loop @B - - popad - ret -MemUReadCachelines ENDP - -;=============================================================================== -;MemUDummyCLRead: -; -; Perform a single cache line read from a given physical address. -; -; In: Address - Physical address to be read -; ClCount - number of cachelines to be read -; Out: -; -;All registers preserved. -;=============================================================================== -MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD - _SFENCE - pushad - mov eax,Address - mov dl,fs:[eax] - popad - ret -MemUDummyCLRead ENDP - -;=============================================================================== -;MemUFlushPattern: -; -; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used -;to ensure cache miss on the next read training. -; -; In: Address - Physical address to be flushed -; ClCount - number of cachelines to be flushed -; Out: -; -;All registers preserved. -;=============================================================================== -MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD - pushad - mov edi,Address - movzx ecx,ClCount - @@: - _MFENCE ; Force strong ordering of clflush - db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi] - _MFENCE - add edi,64 - loop @B - popad - ret -MemUFlushPattern ENDP - - -;=============================================================================== -;MemUGetWrLvNblErr: -; Read ClCount number of cachelines then return the bitmap that indicates -; the write leveling result of each byte lane. -; -; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result -; Address - Physical address to be sampled -; ClCount - number of cachelines to be read -; -; OUT: ErrBitmap - WL result -; -;All registers preserved -;=============================================================================== -MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD -LOCAL ZeroCount[32]:WORD - - pushad - mov esi,Address - _EXECFENCE - ;Cache fill - movzx ecx,ClCount - @@: - mov eax,fs:[esi] - add esi,64 - loop @B - _MFENCE - - ; Then, count the number of 0's - ;push es - ;push ss - ;pop es - lea edi,ZeroCount - mov cx,SIZEOF ZeroCount - mov al,0 - rep stosb - ;pop es - - mov esi,Address - lea edi,ZeroCount - mov cx,ClCount - shl cx,6 - .while(cx > 0) - mov al,fs:[esi] - test al,00Fh ;check lower nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - test al,0F0h ;check upper nibble - .if(ZERO?) - inc WORD PTR [edi] - .endif - add edi,2 - inc esi - dec cx - test cx,07h - .if(ZERO?) - sub edi,(16*2) - sub cx,8 - add esi,8 - .endif - .endw - - ; Then, average and compress data to error bits - lea esi,ZeroCount - mov dx,ClCount - shl dx,1 - xor eax,eax - xor ecx,ecx - mov cl,0 - .while(cl<16) - .if(WORD PTR [esi] < dx) - bts eax,ecx - .endif - add esi,2 - inc cl - .endw - xor edx,edx - mov dx,WORD PTR ErrBitmap - mov [edx], ax - - popad - ret -MemUGetWrLvNblErr ENDP - -;=============================================================================== -;AlignPointerTo16Byte: -; Modifies BufferPtr to be 16 byte aligned -; -; In: BufferPtrPtr - Pointer to buffer pointer -; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned -; -;All registers preserved. -;=============================================================================== -AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD - push edx - push eax - mov edx, BufferPtrPtr - mov eax, [edx] - add eax, 16 - and ax, 0FFF0h - mov [edx], eax - pop eax - pop edx - ret -AlignPointerTo16Byte ENDP - -;=============================================================================== -;MemUMFenceInstr: -; Serialize instruction -; -; In: -; Out: -; -;All registers preserved. -;=============================================================================== -MemUMFenceInstr PROC CALLCONV PUBLIC - _MFENCE - ret -MemUMFenceInstr ENDP - - END - |