diff options
Diffstat (limited to 'src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h | 3054 |
1 files changed, 0 insertions, 3054 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h deleted file mode 100644 index e42727bbfc..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h +++ /dev/null @@ -1,3054 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -#include <MemInfoHob.h> - -/// -/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. -/// -typedef struct { - UINT8 Revision; ///< Chipset Init Info Revision - UINT8 Rsvd[3]; ///< Reserved - UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table - UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table -} CHIPSET_INIT_INFO; - - -/** Fsp M Configuration -**/ -typedef struct { - -/** Offset 0x0040 - Memory SPD Pointer Channel 0 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr00; - -/** Offset 0x0044 - Memory SPD Pointer Channel 0 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr01; - -/** Offset 0x0048 - Memory SPD Pointer Channel 1 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr10; - -/** Offset 0x004C - Memory SPD Pointer Channel 1 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr11; - -/** Offset 0x0050 - Spd Address Tabl - Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used - if SPD Address is 00 -**/ - UINT8 SpdAddressTable[4]; - -/** Offset 0x0054 - SPD Data Length - Length of SPD Data - 0x100:256 Bytes, 0x200:512 Bytes -**/ - UINT16 MemorySpdDataLen; - -/** Offset 0x0056 - Dq Byte Map CH0 - Dq byte mapping between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqByteMapCh0[12]; - -/** Offset 0x0062 - Dq Byte Map CH1 - Dq byte mapping between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqByteMapCh1[12]; - -/** Offset 0x006E - Dqs Map CPU to DRAM CH 0 - Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqsMapCpu2DramCh0[8]; - -/** Offset 0x0076 - Dqs Map CPU to DRAM CH 1 - Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqsMapCpu2DramCh1[8]; - -/** Offset 0x007E - RcompResister settings - Indicates RcompReister settings: Board-dependent -**/ - UINT16 RcompResistor[3]; - -/** Offset 0x0084 - RcompTarget settings - RcompTarget settings: board-dependent -**/ - UINT16 RcompTarget[5]; - -/** Offset 0x008E -**/ - UINT8 UnusedUpdSpace0[2]; - -/** Offset 0x0090 - Platform Reserved Memory Size - The minimum platform memory size required to pass control into DXE -**/ - UINT64 PlatformMemorySize; - -/** Offset 0x0098 - PcdSerialDebugLevel - Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info, 5:Load Error Warnings Info and Verbose -**/ - UINT8 PcdSerialDebugLevel; - -/** Offset 0x0099 - Ask MRC to clear memory content - Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. - $EN_DIS -**/ - UINT8 CleanMemory; - -/** Offset 0x009A - Smram Mask - The SMM Regions AB-SEG and/or H-SEG reserved - 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both -**/ - UINT8 SmramMask; - -/** Offset 0x009B - Dqs Pins Interleaved Setting - Indicates DqPinsInterleaved setting: board-dependent - $EN_DIS -**/ - UINT8 DqPinsInterleaved; - -/** Offset 0x009C - SA GV - System Agent dynamic frequency support and when enabled memory will be training - at three different frequencies. - 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled -**/ - UINT8 SaGv; - -/** Offset 0x009D -**/ - UINT8 UnusedUpdSpace1; - -/** Offset 0x009E - DDR Frequency Limit - Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, - 2133, 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 DdrFreqLimit; - -/** Offset 0x00A0 - Channel A DIMM Control - Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel0; - -/** Offset 0x00A1 - Channel B DIMM Control - Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel1; - -/** Offset 0x00A2 - MRC Safe Config - Enables/Disable MRC Safe Config - $EN_DIS -**/ - UINT8 MrcSafeConfig; - -/** Offset 0x00A3 - LPDDR4 Write DQ/DQS Retraining - Enables/Disable LPDDR4 Write DQ/DQS Retraining - $EN_DIS -**/ - UINT8 Lp4DqsOscEn; - -/** Offset 0x00A4 - Training Trace - This option enables the trained state tracing feature in MRC. This feature will - print out the key training parameters state across major training steps. - $EN_DIS -**/ - UINT8 TrainTrace; - -/** Offset 0x00A5 - Rank Margin Tool per Task - This option enables the user to execute Rank Margin Tool per major training step - in the MRC. - $EN_DIS -**/ - UINT8 RmtPerTask; - -/** Offset 0x00A6 - LowSupplyEnData - Enable: Enable Low Supply for LPDDR4 Data, Disable(Default) - $EN_DIS -**/ - UINT8 LowSupplyEnData; - -/** Offset 0x00A7 - LowSupplyEnCcc - Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default) - $EN_DIS -**/ - UINT8 LowSupplyEnCcc; - -/** Offset 0x00A8 - Memory Test on Warm Boot - Run Base Memory Test on Warm Boot - 0:Disable, 1:Enable -**/ - UINT8 MemTestOnWarmBoot; - -/** Offset 0x00A9 -**/ - UINT8 UnusedUpdSpace2; - -/** Offset 0x00AA - Low Frequency - SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, - 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 FreqSaGvLow; - -/** Offset 0x00AC - Mid Frequency - SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, - 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 FreqSaGvMid; - -/** Offset 0x00AE - DDR Speed Control - DDR Frequency and Gear control for all SAGV points. - 0:Auto, 1:Manual -**/ - UINT8 DdrSpeedControl; - -/** Offset 0x00AF - SA GV Low Gear - Gear Selection for SAGV Low point - 0:Gear1, 1:Gear2 -**/ - UINT8 SaGvLowGear2; - -/** Offset 0x00B0 - SA GV Mid Gear - Gear Selection for SAGV Mid point - 0:Gear1, 1:Gear2 -**/ - UINT8 SaGvMidGear2; - -/** Offset 0x00B1 - SA GV High Gear - Gear Selection for SAGV High point, or when SAGV is disabled - 0:Gear1, 1:Gear2 -**/ - UINT8 SaGvHighGear2; - -/** Offset 0x00B2 - Scrambler Support - This option enables data scrambling in memory. - $EN_DIS -**/ - UINT8 ScramblerSupport; - -/** Offset 0x00B3 - Safe Mode Support - This option configures the varous items in the IO and MC to be more conservative.(def=Disable) - $EN_DIS -**/ - UINT8 SafeMode; - -/** Offset 0x00B4 - Ddr4OneDpc - DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, - or on both (default) - 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled -**/ - UINT8 Ddr4OneDpc; - -/** Offset 0x00B5 - Probeless Trace - Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. - This also requires IED to be enabled. - $EN_DIS -**/ - UINT8 ProbelessTrace; - -/** Offset 0x00B6 - VREF_CA - CA Vref routing: board-dependent - 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, - 2:VREF_CA to CH_A and VREF_DQ_B to CH_B -**/ - UINT8 CaVrefConfig; - -/** Offset 0x00B7 - SPD Profile Selected - Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP - Profile 1, 3=XMP Profile 2 - 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 -**/ - UINT8 SpdProfileSelected; - -/** Offset 0x00B8 - Memory Voltage - Memory Voltage Override (Vddq). Default = no override - 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 - Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts -**/ - UINT16 VddVoltage; - -/** Offset 0x00BA - Memory Reference Clock - 100MHz, 133MHz. - 0:133MHz, 1:100MHz -**/ - UINT8 RefClk; - -/** Offset 0x00BB - Memory Ratio - Automatic or the frequency will equal ratio times reference clock. Set to Auto to - recalculate memory timings listed below. - 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 -**/ - UINT8 Ratio; - -/** Offset 0x00BC - tCL - CAS Latency, 0: AUTO, max: 31 -**/ - UINT8 tCL; - -/** Offset 0x00BD - tCWL - Min CAS Write Latency Delay Time, 0: AUTO, max: 34 -**/ - UINT8 tCWL; - -/** Offset 0x00BE - tFAW - Min Four Activate Window Delay Time, 0: AUTO, max: 63 -**/ - UINT16 tFAW; - -/** Offset 0x00C0 - tRAS - RAS Active Time, 0: AUTO, max: 64 -**/ - UINT16 tRAS; - -/** Offset 0x00C2 - tRCD/tRP - RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 -**/ - UINT8 tRCDtRP; - -/** Offset 0x00C3 -**/ - UINT8 UnusedUpdSpace3; - -/** Offset 0x00C4 - tREFI - Refresh Interval, 0: AUTO, max: 65535 -**/ - UINT16 tREFI; - -/** Offset 0x00C6 - tRFC - Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 -**/ - UINT16 tRFC; - -/** Offset 0x00C8 - tRRD - Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 -**/ - UINT8 tRRD; - -/** Offset 0x00C9 - tRTP - Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal - values: 5, 6, 7, 8, 9, 10, 12 -**/ - UINT8 tRTP; - -/** Offset 0x00CA - tWR - Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, - 20, 24, 30, 34, 40 - 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, - 34:34, 40:40 -**/ - UINT8 tWR; - -/** Offset 0x00CB - tWTR - Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 -**/ - UINT8 tWTR; - -/** Offset 0x00CC - NMode - System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N -**/ - UINT8 NModeSupport; - -/** Offset 0x00CD - DllBwEn[0] - DllBwEn[0], for 1067 (0..7) -**/ - UINT8 DllBwEn0; - -/** Offset 0x00CE - DllBwEn[1] - DllBwEn[1], for 1333 (0..7) -**/ - UINT8 DllBwEn1; - -/** Offset 0x00CF - DllBwEn[2] - DllBwEn[2], for 1600 (0..7) -**/ - UINT8 DllBwEn2; - -/** Offset 0x00D0 - DllBwEn[3] - DllBwEn[3], for 1867 and up (0..7) -**/ - UINT8 DllBwEn3; - -/** Offset 0x00D1 - ISVT IO Port Address - ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default -**/ - UINT8 IsvtIoPort; - -/** Offset 0x00D2 - HobBufferSize - Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB - total HOB size). - 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value -**/ - UINT8 HobBufferSize; - -/** Offset 0x00D3 - Early Command Training - Enables/Disable Early Command Training - $EN_DIS -**/ - UINT8 ECT; - -/** Offset 0x00D4 - SenseAmp Offset Training - Enables/Disable SenseAmp Offset Training - $EN_DIS -**/ - UINT8 SOT; - -/** Offset 0x00D5 - Early ReadMPR Timing Centering 2D - Enables/Disable Early ReadMPR Timing Centering 2D - $EN_DIS -**/ - UINT8 ERDMPRTC2D; - -/** Offset 0x00D6 - Read MPR Training - Enables/Disable Read MPR Training - $EN_DIS -**/ - UINT8 RDMPRT; - -/** Offset 0x00D7 - Receive Enable Training - Enables/Disable Receive Enable Training - $EN_DIS -**/ - UINT8 RCVET; - -/** Offset 0x00D8 - Jedec Write Leveling - Enables/Disable Jedec Write Leveling - $EN_DIS -**/ - UINT8 JWRL; - -/** Offset 0x00D9 - Early Write Time Centering 2D - Enables/Disable Early Write Time Centering 2D - $EN_DIS -**/ - UINT8 EWRTC2D; - -/** Offset 0x00DA - Early Read Time Centering 2D - Enables/Disable Early Read Time Centering 2D - $EN_DIS -**/ - UINT8 ERDTC2D; - -/** Offset 0x00DB - Write Timing Centering 1D - Enables/Disable Write Timing Centering 1D - $EN_DIS -**/ - UINT8 WRTC1D; - -/** Offset 0x00DC - Write Voltage Centering 1D - Enables/Disable Write Voltage Centering 1D - $EN_DIS -**/ - UINT8 WRVC1D; - -/** Offset 0x00DD - Read Timing Centering 1D - Enables/Disable Read Timing Centering 1D - $EN_DIS -**/ - UINT8 RDTC1D; - -/** Offset 0x00DE - Dimm ODT Training - Enables/Disable Dimm ODT Training - $EN_DIS -**/ - UINT8 DIMMODTT; - -/** Offset 0x00DF - DIMM RON Training - Enables/Disable DIMM RON Training - $EN_DIS -**/ - UINT8 DIMMRONT; - -/** Offset 0x00E0 - Write Slew Rate Training - Enables/Disable Write Slew Rate Training - $EN_DIS -**/ - UINT8 WRSRT; - -/** Offset 0x00E1 - Read ODT Training - Enables/Disable Read ODT Training - $EN_DIS -**/ - UINT8 RDODTT; - -/** Offset 0x00E2 - Read Equalization Training - Enables/Disable Read Equalization Training - $EN_DIS -**/ - UINT8 RDEQT; - -/** Offset 0x00E3 - Read Amplifier Training - Enables/Disable Read Amplifier Training - $EN_DIS -**/ - UINT8 RDAPT; - -/** Offset 0x00E4 - Write Timing Centering 2D - Enables/Disable Write Timing Centering 2D - $EN_DIS -**/ - UINT8 WRTC2D; - -/** Offset 0x00E5 - Read Timing Centering 2D - Enables/Disable Read Timing Centering 2D - $EN_DIS -**/ - UINT8 RDTC2D; - -/** Offset 0x00E6 - Write Voltage Centering 2D - Enables/Disable Write Voltage Centering 2D - $EN_DIS -**/ - UINT8 WRVC2D; - -/** Offset 0x00E7 - Read Voltage Centering 2D - Enables/Disable Read Voltage Centering 2D - $EN_DIS -**/ - UINT8 RDVC2D; - -/** Offset 0x00E8 - Command Voltage Centering - Enables/Disable Command Voltage Centering - $EN_DIS -**/ - UINT8 CMDVC; - -/** Offset 0x00E9 - Late Command Training - Enables/Disable Late Command Training - $EN_DIS -**/ - UINT8 LCT; - -/** Offset 0x00EA - Round Trip Latency Training - Enables/Disable Round Trip Latency Training - $EN_DIS -**/ - UINT8 RTL; - -/** Offset 0x00EB - Turn Around Timing Training - Enables/Disable Turn Around Timing Training - $EN_DIS -**/ - UINT8 TAT; - -/** Offset 0x00EC - Receive Enable Centering 1D - Enables/Disable Receive Enable Centering 1D - $EN_DIS -**/ - UINT8 RCVENC1D; - -/** Offset 0x00ED - Rank Margin Tool - Enable/disable Rank Margin Tool. - $EN_DIS -**/ - UINT8 RMT; - -/** Offset 0x00EE - Margin Limit Check - Margin Limit Check. Choose level of margin check - 0:Disable, 1:L1, 2:L2, 3:Both -**/ - UINT8 MarginLimitCheck; - -/** Offset 0x00EF -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x00F0 - Margin Limit L2 - % of L1 check for margin limit check -**/ - UINT16 MarginLimitL2; - -/** Offset 0x00F2 - Memory Test - Enables/Disable Memory Test - $EN_DIS -**/ - UINT8 MEMTST; - -/** Offset 0x00F3 - DIMM SPD Alias Test - Enables/Disable DIMM SPD Alias Test - $EN_DIS -**/ - UINT8 ALIASCHK; - -/** Offset 0x00F4 - Retrain Margin Check - Enables/Disable Retrain Margin Check - $EN_DIS -**/ - UINT8 RMC; - -/** Offset 0x00F5 - Write Drive Strength Up/Dn independently - Enables/Disable Write Drive Strength Up/Dn independently - $EN_DIS -**/ - UINT8 WRDSUDT; - -/** Offset 0x00F6 - Command Slew Rate Training - Enables/Disable Command Slew Rate Training - $EN_DIS -**/ - UINT8 CMDSR; - -/** Offset 0x00F7 - Command Drive Strength and Equalization 2D - Enables/Disable Command Drive Strength and Equalization 2D - $EN_DIS -**/ - UINT8 CMDDSEQ; - -/** Offset 0x00F8 - Command Normalization - Enables/Disable Command Normalization - $EN_DIS -**/ - UINT8 CMDNORM; - -/** Offset 0x00F9 - Early DQ Write Drive Strength and Equalization Training - Enables/Disable Early DQ Write Drive Strength and Equalization Training - $EN_DIS -**/ - UINT8 EWRDSEQ; - -/** Offset 0x00FA - Read Voltage Centering - Enables/Disable Read Voltage Centering - $EN_DIS -**/ - UINT8 RDVC1D; - -/** Offset 0x00FB - Write TCO Comp Training - Enables/Disable Write TCO Comp Training - $EN_DIS -**/ - UINT8 TXTCO; - -/** Offset 0x00FC - Clock TCO Comp Training - Enables/Disable Clock TCO Comp Training - $EN_DIS -**/ - UINT8 CLKTCO; - -/** Offset 0x00FD - Dimm ODT CA Training - Enables/Disable Dimm ODT CA Training - $EN_DIS -**/ - UINT8 DIMMODTCA; - -/** Offset 0x00FE - Write TCO Dqs Training - Enables/Disable Write TCO Dqs Training - $EN_DIS -**/ - UINT8 TXTCODQS; - -/** Offset 0x00FF - Duty Cycle Correction - Enables/Disable Duty Cycle Correction - $EN_DIS -**/ - UINT8 DCC; - -/** Offset 0x0100 - DQ DFE Training - Enable/Disable DQ DFE Training - $EN_DIS -**/ - UINT8 DQDFE; - -/** Offset 0x0101 - Sense Amplifier Correction Training - Enable/Disable Sense Amplifier Correction Training - $EN_DIS -**/ - UINT8 SOTC; - -/** Offset 0x0102 - ECC Support - Enables/Disable ECC Support - $EN_DIS -**/ - UINT8 EccSupport; - -/** Offset 0x0103 - Memory Remap - Enables/Disable Memory Remap - $EN_DIS -**/ - UINT8 RemapEnable; - -/** Offset 0x0104 - MRC Time Measure - Enable/Disable MRC Time Measure - $EN_DIS -**/ - UINT8 MrcTimeMeasure; - -/** Offset 0x0105 - MRC Fast Boot - Enable/Disable MRC Fast flow - $EN_DIS -**/ - UINT8 MrcFastBoot; - -/** Offset 0x0106 - MRC Force Training on Warm - Enables/Disable the MRC training on warm boot - $EN_DIS -**/ - UINT8 MrcTrainOnWarm; - -/** Offset 0x0107 - Rank Interleave support - Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at - the same time. - $EN_DIS -**/ - UINT8 RankInterleave; - -/** Offset 0x0108 - Enhanced Interleave support - Enables/Disable Enhanced Interleave support - $EN_DIS -**/ - UINT8 EnhancedInterleave; - -/** Offset 0x0109 - Memory Trace - Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of - equal size. This option may change TOLUD and REMAP values as needed. - $EN_DIS -**/ - UINT8 MemoryTrace; - -/** Offset 0x010A - Ch Hash Support - Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode - $EN_DIS -**/ - UINT8 ChHashEnable; - -/** Offset 0x010B - Extern Therm Status - Enables/Disable Extern Therm Status - $EN_DIS -**/ - UINT8 EnableExtts; - -/** Offset 0x010C - Closed Loop Therm Manage - Enables/Disable Closed Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableCltm; - -/** Offset 0x010D - Open Loop Therm Manage - Enables/Disable Open Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableOltm; - -/** Offset 0x010E - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter - $EN_DIS -**/ - UINT8 EnablePwrDn; - -/** Offset 0x010F - DDR PowerDown and idle counter - LPDDR - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) - $EN_DIS -**/ - UINT8 EnablePwrDnLpddr; - -/** Offset 0x0110 - Use user provided power weights, scale factor, and channel power floor values - Enables/Disable Use user provided power weights, scale factor, and channel power - floor values - $EN_DIS -**/ - UINT8 UserPowerWeightsEn; - -/** Offset 0x0111 - RAPL PL Lock - Enables/Disable RAPL PL Lock - $EN_DIS -**/ - UINT8 RaplLim2Lock; - -/** Offset 0x0112 - RAPL PL 2 enable - Enables/Disable RAPL PL 2 enable - $EN_DIS -**/ - UINT8 RaplLim2Ena; - -/** Offset 0x0113 - RAPL PL 1 enable - Enables/Disable RAPL PL 1 enable - $EN_DIS -**/ - UINT8 RaplLim1Ena; - -/** Offset 0x0114 - SelfRefresh Enable - Enables/Disable SelfRefresh Enable - $EN_DIS -**/ - UINT8 SrefCfgEna; - -/** Offset 0x0115 - Throttler CKEMin Defeature - LPDDR - Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeatLpddr; - -/** Offset 0x0116 - Throttler CKEMin Defeature - Enables/Disable Throttler CKEMin Defeature - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeat; - -/** Offset 0x0117 - Enable RH Prevention - Enables/Disable RH Prevention - $EN_DIS -**/ - UINT8 RhPrevention; - -/** Offset 0x0118 - Exit On Failure (MRC) - Enables/Disable Exit On Failure (MRC) - $EN_DIS -**/ - UINT8 ExitOnFailure; - -/** Offset 0x0119 - LPDDR Thermal Sensor - Enables/Disable LPDDR Thermal Sensor - $EN_DIS -**/ - UINT8 DdrThermalSensor; - -/** Offset 0x011A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedClock; - -/** Offset 0x011B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedZq; - -/** Offset 0x011C - Base reference clock value - Base reference clock value, in Hertz(Default is 125Hz) - 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz -**/ - UINT32 BClkFrequency; - -/** Offset 0x0120 - Ch Hash Interleaved Bit - Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave - the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 - 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 -**/ - UINT8 ChHashInterleaveBit; - -/** Offset 0x0121 -**/ - UINT8 UnusedUpdSpace5; - -/** Offset 0x0122 - Ch Hash Mask - Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to - BITS [19:6] Default is 0x30CC -**/ - UINT16 ChHashMask; - -/** Offset 0x0124 - Extended Bank Hashing - Eanble/Disable ExtendedBankHashing - $EN_DIS -**/ - UINT8 ExtendedBankHashing; - -/** Offset 0x0125 - Energy Scale Factor - Energy Scale Factor, Default is 4 -**/ - UINT8 EnergyScaleFact; - -/** Offset 0x0126 - EPG DIMM Idd3N - Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on - a per DIMM basis. Default is 26 -**/ - UINT16 Idd3n; - -/** Offset 0x0128 - EPG DIMM Idd3P - Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated - on a per DIMM basis. Default is 11 -**/ - UINT16 Idd3p; - -/** Offset 0x012A - RH Activation Probability - RH Activation Probability, Probability value is 1/2^(inputvalue) -**/ - UINT8 RhActProbability; - -/** Offset 0x012B - RAPL PL 2 WindowX - Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim2WindX; - -/** Offset 0x012C - RAPL PL 2 WindowY - Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim2WindY; - -/** Offset 0x012D - RAPL PL 1 WindowX - Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindX; - -/** Offset 0x012E - RAPL PL 1 WindowY - Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindY; - -/** Offset 0x012F -**/ - UINT8 UnusedUpdSpace6; - -/** Offset 0x0130 - RAPL PL 2 Power - range[0;2^14-1]= [2047.875;0]in W, (224= Def) -**/ - UINT16 RaplLim2Pwr; - -/** Offset 0x0132 - RAPL PL 1 Power - range[0;2^14-1]= [2047.875;0]in W, (224= Def) -**/ - UINT16 RaplLim1Pwr; - -/** Offset 0x0134 - Warm Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 WarmThresholdCh0Dimm0; - -/** Offset 0x0135 - Warm Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 WarmThresholdCh0Dimm1; - -/** Offset 0x0136 - Warm Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 WarmThresholdCh1Dimm0; - -/** Offset 0x0137 - Warm Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 WarmThresholdCh1Dimm1; - -/** Offset 0x0138 - Hot Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 HotThresholdCh0Dimm0; - -/** Offset 0x0139 - Hot Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 HotThresholdCh0Dimm1; - -/** Offset 0x013A - Hot Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 HotThresholdCh1Dimm0; - -/** Offset 0x013B - Hot Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 -**/ - UINT8 HotThresholdCh1Dimm1; - -/** Offset 0x013C - Warm Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm0; - -/** Offset 0x013D - Warm Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm1; - -/** Offset 0x013E - Warm Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm0; - -/** Offset 0x013F - Warm Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm1; - -/** Offset 0x0140 - Hot Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm0; - -/** Offset 0x0141 - Hot Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm1; - -/** Offset 0x0142 - Hot Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm0; - -/** Offset 0x0143 - Hot Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm1; - -/** Offset 0x0144 - Idle Energy Ch0Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm0; - -/** Offset 0x0145 - Idle Energy Ch0Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm1; - -/** Offset 0x0146 - Idle Energy Ch1Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm0; - -/** Offset 0x0147 - Idle Energy Ch1Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm1; - -/** Offset 0x0148 - PowerDown Energy Ch0Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm0; - -/** Offset 0x0149 - PowerDown Energy Ch0Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm1; - -/** Offset 0x014A - PowerDown Energy Ch1Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm0; - -/** Offset 0x014B - PowerDown Energy Ch1Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm1; - -/** Offset 0x014C - Activate Energy Ch0Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm0; - -/** Offset 0x014D - Activate Energy Ch0Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm1; - -/** Offset 0x014E - Activate Energy Ch1Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm0; - -/** Offset 0x014F - Activate Energy Ch1Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm1; - -/** Offset 0x0150 - Read Energy Ch0Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm0; - -/** Offset 0x0151 - Read Energy Ch0Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm1; - -/** Offset 0x0152 - Read Energy Ch1Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm0; - -/** Offset 0x0153 - Read Energy Ch1Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm1; - -/** Offset 0x0154 - Write Energy Ch0Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm0; - -/** Offset 0x0155 - Write Energy Ch0Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm1; - -/** Offset 0x0156 - Write Energy Ch1Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm0; - -/** Offset 0x0157 - Write Energy Ch1Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm1; - -/** Offset 0x0158 - Throttler CKEMin Timer - Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). - Dfault is 0x30 -**/ - UINT8 ThrtCkeMinTmr; - -/** Offset 0x0159 - Cke Rank Mapping - Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies - which rank CKE[i] goes to. -**/ - UINT8 CkeRankMapping; - -/** Offset 0x015A - Rapl Power Floor Ch0 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh0; - -/** Offset 0x015B - Rapl Power Floor Ch1 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh1; - -/** Offset 0x015C - Command Rate Support - CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs - 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS -**/ - UINT8 EnCmdRate; - -/** Offset 0x015D - REFRESH_2X_MODE - 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot - 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only -**/ - UINT8 Refresh2X; - -/** Offset 0x015E - Energy Performance Gain - Enable/disable(default) Energy Performance Gain. - $EN_DIS -**/ - UINT8 EpgEnable; - -/** Offset 0x015F - Row Hammer Solution - Type of method used to prevent Row Hammer. Default is Hardware RHP - 0:Hardware RHP, 1:2x Refresh -**/ - UINT8 RhSolution; - -/** Offset 0x0160 - User Manual Threshold - Disabled: Predefined threshold will be used.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserThresholdEnable; - -/** Offset 0x0161 - User Manual Budget - Disabled: Configuration of memories will defined the Budget value.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserBudgetEnable; - -/** Offset 0x0162 - TcritMax - Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax - has to be greater than THIGHMax .\n - Critical temperature will be TcritMax -**/ - UINT8 TsodTcritMax; - -/** Offset 0x0163 - Event mode - Disable:Comparator mode.\n - Enable:Interrupt mode - $EN_DIS -**/ - UINT8 TsodEventMode; - -/** Offset 0x0164 - EVENT polarity - Disable:Active LOW.\n - Enable:Active HIGH - $EN_DIS -**/ - UINT8 TsodEventPolarity; - -/** Offset 0x0165 - Critical event only - Disable:Trips on alarm or critical.\n - Enable:Trips only if criticaal temperature is reached - $EN_DIS -**/ - UINT8 TsodCriticalEventOnly; - -/** Offset 0x0166 - Event output control - Disable:Event output disable.\n - Enable:Event output enabled - $EN_DIS -**/ - UINT8 TsodEventOutputControl; - -/** Offset 0x0167 - Alarm window lock bit - Disable:Alarm trips are not locked and can be changed.\n - Enable:Alarm trips are locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodAlarmwindowLockBit; - -/** Offset 0x0168 - Critical trip lock bit - Disable:Critical trip is not locked and can be changed.\n - Enable:Critical trip is locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodCriticaltripLockBit; - -/** Offset 0x0169 - Shutdown mode - Disable:Temperature sensor enable.\n - Enable:Temperature sensor disable - $EN_DIS -**/ - UINT8 TsodShutdownMode; - -/** Offset 0x016A - ThighMax - Thigh = ThighMax (Default is 93) -**/ - UINT8 TsodThigMax; - -/** Offset 0x016B - User Manual Thig and Tcrit - Disabled(Default): Temperature will be given by the configuration of memories and - 1x or 2xrefresh rate.\n - Enabled: User Input will define for Thigh and Tcrit. - $EN_DIS -**/ - UINT8 TsodManualEnable; - -/** Offset 0x016C - Force OLTM or 2X Refresh when needed - Disabled(Default): = Force OLTM.\n - Enabled: = Force 2x Refresh. - $EN_DIS -**/ - UINT8 ForceOltmOrRefresh2x; - -/** Offset 0x016D - Pwr Down Idle Timer - The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means - AUTO: 64 for ULX/ULT, 128 for DT/Halo -**/ - UINT8 PwdwnIdleCounter; - -/** Offset 0x016E - Bitmask of ranks that have CA bus terminated - Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, - Rank0 is terminating and Rank1 is non-terminating</b> -**/ - UINT8 CmdRanksTerminated; - -/** Offset 0x016F - RMTLoopCount - Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO -**/ - UINT8 RMTLoopCount; - -/** Offset 0x0170 - Throttler CKEMin Timer for LPDDR - LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH - (4). Dfault is 0x40 -**/ - UINT8 ThrtCkeMinTmrLpddr; - -/** Offset 0x0171 - Retrain on Fast Fail - Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled - $EN_DIS -**/ - UINT8 RetrainOnFastFail; - -/** Offset 0x0172 - Rank Margin Tool Per Bit - Enable/disable Rank Margin Tool Per Bit. - $EN_DIS -**/ - UINT8 RMTBIT; - -/** Offset 0x0173 -**/ - UINT8 MrcPreMemRsvd[14]; - -/** Offset 0x0181 - Over clocking support - Over clocking support; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 OcSupport; - -/** Offset 0x0182 - Over clocking Lock - Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 OcLock; - -/** Offset 0x0183 - Maximum Core Turbo Ratio Override - Maximum core turbo ratio override allows to increase CPU core frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 -**/ - UINT8 CoreMaxOcRatio; - -/** Offset 0x0184 - Core voltage mode - Core voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 CoreVoltageMode; - -/** Offset 0x0185 - Maximum clr turbo ratio override - Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 -**/ - UINT8 RingMaxOcRatio; - -/** Offset 0x0186 - Ring Downbin - Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.0: Disable; <b>1: Enable.</b> - $EN_DIS -**/ - UINT8 RingDownBin; - -/** Offset 0x0187 - Ring voltage mode - Ring voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 RingVoltageMode; - -/** Offset 0x0188 - Ring voltage override - The ring voltage override which is applied to the entire range of cpu ring frequencies. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageOverride; - -/** Offset 0x018A - Ring Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageAdaptive; - -/** Offset 0x018C - Ring Turbo voltage Offset - The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 -**/ - UINT16 RingVoltageOffset; - -/** Offset 0x018E - core voltage override - The core voltage override which is applied to the entire range of cpu core frequencies. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageOverride; - -/** Offset 0x0190 - Core Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageAdaptive; - -/** Offset 0x0192 - Core Turbo voltage Offset - The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 -**/ - UINT16 CoreVoltageOffset; - -/** Offset 0x0194 - Core PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 CorePllVoltageOffset; - -/** Offset 0x0195 - GT PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 GtPllVoltageOffset; - -/** Offset 0x0196 - Ring PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 RingPllVoltageOffset; - -/** Offset 0x0197 - System Agent PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 SaPllVoltageOffset; - -/** Offset 0x0198 - Memory Controller PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 McPllVoltageOffset; - -/** Offset 0x0199 - BCLK Adaptive Voltage Enable - When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: - Disable;<b> 1: Enable - $EN_DIS -**/ - UINT8 BclkAdaptiveVoltage; - -/** Offset 0x019A - AVX2 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx2RatioOffset; - -/** Offset 0x019B - AVX3 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx3RatioOffset; - -/** Offset 0x019C - TjMax Offset - TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support - TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 -**/ - UINT8 TjMaxOffset; - -/** Offset 0x019D - Fivr Faults - Fivr Faults; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrFaults; - -/** Offset 0x019E - Fivr Efficiency - Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrEfficiency; - -/** Offset 0x019F -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x01A0 - VccIn Voltage Override - This will override VccIn output voltage level to the voltage value specified. Valid - Range 0 to 3000 -**/ - UINT16 VccInVoltageOverride; - -/** Offset 0x01A2 - Avx2 Voltage Guardband Scaling Factor - AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in - 1/100 units, where a value of 125 would apply a 1.25 scale factor. -**/ - UINT8 Avx2VoltageScaleFactor; - -/** Offset 0x01A3 - Avx512 Voltage Guardband Scaling Factor - AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 - in 1/100 units, where a value of 125 would apply a 1.25 scale factor. -**/ - UINT8 Avx512VoltageScaleFactor; - -/** Offset 0x01A4 - Non-Core High Voltage Mode - Enable High Voltage Mode in the non-core FIVR domains (Ring/GT). Used for LN2 cold - boot mitigation. <b>0 - Disable</b>, 1 - Enable - $EN_DIS -**/ - UINT8 NonCoreHighVoltageMode; - -/** Offset 0x01A5 - Core High Voltage Mode - Enable High Voltage Mode in the core FIVR Domains. Used for LN2 cold boot mitigation. - <b>0 - Disable</b>, 1 - Enable - $EN_DIS -**/ - UINT8 CoreHighVoltageMode; - -/** Offset 0x01A6 - Per Core Ratio Limit - Per Core Ratio Limit. Range 0 - 120. <b>Default = 0</b>, no BIOS programming of - per core ratio. -**/ - UINT8 PerCoreRatioLimit[8]; - -/** Offset 0x01AE - FIVR TDC - Enable or Disable FIVR TDC from PCODE. <b>0: Disable</b>. 1: Enable. - $EN_DIS -**/ - UINT8 FivrTdc; - -/** Offset 0x01AF - Full Range Multiplier unlock enable - Enable or Disable communication between Punit and Core in 100MHz granularity. <b>0: - Disable</b>. 1: Enable. - $EN_DIS -**/ - UINT8 FullRangeMultiplierUnlockEn; - -/** Offset 0x01B0 - SA PLL Freq override - Enable or Disable SA PLL Freq override to 1600MHz instead of 3200MHz on Desktop. - <b>0: Disable</b>. 1: Enable. - $EN_DIS -**/ - UINT8 SaPllFreqOverride; - -/** Offset 0x01B1 - XHCI PLL override - Enable or Disable XHCI PLL override to use TMU PLL instead of SA PLL. <b>0: Disable</b>. - 1: Enable. - $EN_DIS -**/ - UINT8 XhciPllOverride; - -/** Offset 0x01B2 - FIVR PS - Enable or Disable FIVR PS. <b>0: Disable</b>. 1: Enable. - $EN_DIS -**/ - UINT8 FivrPs; - -/** Offset 0x01B3 - FIVR PROTECTION - Enable or Disable FIVR overvoltage and overcurrent protection. <b>0: Disable</b>. - 1: Enable. - $EN_DIS -**/ - UINT8 FivrProtection; - -/** Offset 0x01B4 - TSC HW Fixup - Enable or Disable Core HW Fixup during TSC copy from PMA and APIC. <b>0: Disable</b>. - 1: Enable. - $EN_DIS -**/ - UINT8 TscHwFixup; - -/** Offset 0x01B5 -**/ - UINT8 UnusedUpdSpace8; - -/** Offset 0x01B6 - VccIN VR MAX Voltage - The new VccIN VR MAX Voltage to allow requesting in U3.13V format. Valid Range is - in U3.13 from 0 to 7999V. -**/ - UINT16 VccinVrMaxVoltage; - -/** Offset 0x01B8 - Post Divider (PVD) Ratio Threshold - PVD Ratio Threshold. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 PvdRatioThreshold; - -/** Offset 0x01B9 - Hyper Threading Enable/Disable - Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 HyperThreading; - -/** Offset 0x01BA - Boot frequency - Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- - <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo - is selected BIOS will start in max non-turbo mode and switch to Turbo mode. - 0:0, 1:1, 2:2 -**/ - UINT8 BootFrequency; - -/** Offset 0x01BB - Number of active cores - Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: - 2 </b>;<b>3: 3 </b> - 0:All, 1:1, 2:2, 3:3 -**/ - UINT8 ActiveCoreCount; - -/** Offset 0x01BC - Processor Early Power On Configuration FCLK setting - <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- - 2: 400 MHz. - 3: Reserved - 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved -**/ - UINT8 FClkFrequency; - -/** Offset 0x01BD - Set JTAG power in C10 and deeper power states - False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 - and deeper power states for debug purpose. <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 JtagC10PowerGateDisable; - -/** Offset 0x01BE - BIST on Reset - Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 BistOnReset; - -/** Offset 0x01BF - Enable or Disable VMX - Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 VmxEnable; - -/** Offset 0x01C0 - CPU ratio value - CPU ratio value. Valid Range 0 to 63 -**/ - UINT8 CpuRatio; - -/** Offset 0x01C1 - Enable or Disable TME - Enable or Disable TME; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 TmeEnable; - -/** Offset 0x01C2 - Enable CPU CrashLog - Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 CpuCrashLogEnable; - -/** Offset 0x01C3 - CPU Run Control - Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: - No Change</b> - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x01C4 - CPU Run Control Lock - Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DebugInterfaceLockEnable; - -/** Offset 0x01C5 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. </b>0: Initialize; <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInitPreMem; - -/** Offset 0x01C6 -**/ - UINT8 CpuPreMemRsvd[13]; - -/** Offset 0x01D3 - Skip Stop PBET Timer Enable/Disable - Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 SkipStopPbet; - -/** Offset 0x01D4 - C6DRAM power gating feature - This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM - power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating - feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. - $EN_DIS -**/ - UINT8 EnableC6Dram; - -/** Offset 0x01D5 - BiosGuard - Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable - $EN_DIS -**/ - UINT8 BiosGuard; - -/** Offset 0x01D6 -**/ - UINT8 BiosGuardToolsInterface; - -/** Offset 0x01D7 - EnableSgx - Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control - 0: Disable, 1: Enable, 2: Software Control -**/ - UINT8 EnableSgx; - -/** Offset 0x01D8 - Txt - Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable - $EN_DIS -**/ - UINT8 Txt; - -/** Offset 0x01D9 -**/ - UINT8 UnusedUpdSpace9[3]; - -/** Offset 0x01DC - PrmrrSize - Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable -**/ - UINT32 PrmrrSize; - -/** Offset 0x01E0 - TxtAcheckRequest - Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. - $EN_DIS -**/ - UINT8 TxtAcheckRequest; - -/** Offset 0x01E1 -**/ - UINT8 UnusedUpdSpace10; - -/** Offset 0x01E2 - BiosSize - Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable -**/ - UINT16 BiosSize; - -/** Offset 0x01E4 - SinitMemorySize - Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable -**/ - UINT32 SinitMemorySize; - -/** Offset 0x01E8 - TxtHeapMemorySize - Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable -**/ - UINT32 TxtHeapMemorySize; - -/** Offset 0x01EC -**/ - UINT8 UnusedUpdSpace11[4]; - -/** Offset 0x01F0 - TxtDprMemoryBase - Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable -**/ - UINT64 TxtDprMemoryBase; - -/** Offset 0x01F8 - TxtDprMemorySize - Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable -**/ - UINT32 TxtDprMemorySize; - -/** Offset 0x01FC - BiosAcmBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 BiosAcmBase; - -/** Offset 0x0200 - BiosAcmSize - Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable -**/ - UINT32 BiosAcmSize; - -/** Offset 0x0204 - TgaSize - Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable -**/ - UINT32 TgaSize; - -/** Offset 0x0208 - TxtLcpPdBase - Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable -**/ - UINT64 TxtLcpPdBase; - -/** Offset 0x0210 - TxtLcpPdSize - Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable -**/ - UINT64 TxtLcpPdSize; - -/** Offset 0x0218 - ApStartupBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 ApStartupBase; - -/** Offset 0x021C - IsTPMPresence - IsTPMPresence default values -**/ - UINT8 IsTPMPresence; - -/** Offset 0x021D -**/ - UINT8 SecurityPreMemRsvd[16]; - -/** Offset 0x022D -**/ - UINT8 UnusedUpdSpace12[3]; - -/** Offset 0x0230 - Intel Enhanced Debug - Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied - 0 : Disable, 0x400000 : Enable -**/ - UINT32 IedSize; - -/** Offset 0x0234 - Board Type - MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile - Halo, 7=UP Server - 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server -**/ - UINT8 UserBd; - -/** Offset 0x0235 - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOut; - -/** Offset 0x0236 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 DmaControlGuarantee; - -/** Offset 0x0237 -**/ - UINT8 UnusedUpdSpace13[1]; - -/** Offset 0x0238 - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddress[9]; - -/** Offset 0x025C - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisable; - -/** Offset 0x025D - Internal Graphics Pre-allocated Memory - Size of memory preallocated for internal graphics. - 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, - 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, - 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB -**/ - UINT8 IgdDvmt50PreAlloc; - -/** Offset 0x025E - Internal Graphics - Enable/disable internal graphics. - $EN_DIS -**/ - UINT8 InternalGfx; - -/** Offset 0x025F - Aperture Size - Select the Aperture Size. - 0:128 MB, 1:256 MB, 2:512 MB -**/ - UINT8 ApertureSize; - -/** Offset 0x0260 - Selection of the primary display device - 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics - 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics -**/ - UINT8 PrimaryDisplay; - -/** Offset 0x0261 -**/ - UINT8 UnusedUpdSpace14[3]; - -/** Offset 0x0264 - Temporary MMIO address for GTTMMADR - The reference code will use this as Temporary MMIO address space to access GTTMMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr - to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO - + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) -**/ - UINT32 GttMmAdr; - -/** Offset 0x0268 - Temporary MMIO address for GMADR - The reference code will use this as Temporary MMIO address space to access GMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to - (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress - - 0x1) (Where ApertureSize = 256MB) -**/ - UINT32 GmAdr; - -/** Offset 0x026C - Selection of iGFX GTT Memory size - 1=2MB, 2=4MB, 3=8MB, Default is 3 - 1:2MB, 2:4MB, 3:8MB -**/ - UINT16 GttSize; - -/** Offset 0x026E - Selection of PSMI Region size - 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 - 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB -**/ - UINT8 PsmiRegionSize; - -/** Offset 0x026F - Selection of PSMI Support On/Off - 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support - $EN_DIS -**/ - UINT8 GtPsmiSupport; - -/** Offset 0x0270 - Panel Power Enable - Control for enabling/disabling VDD force bit (Required only for early enabling of - eDP panel). 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 PanelPowerEnable; - -/** Offset 0x0271 - PCIe root port Function number for Hybrid Graphics dGPU - Root port Index number to indicate which PCIe root port has dGPU -**/ - UINT8 RootPortIndex; - -/** Offset 0x0272 -**/ - UINT8 UnusedUpdSpace15[2]; - -/** Offset 0x0274 - Hybrid Graphics GPIO information for PEG 0 - Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs -**/ - UINT32 SaRtd3Pcie0Gpio[24]; - -/** Offset 0x02D4 - Hybrid Graphics GPIO information for PEG 1 - Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs -**/ - UINT32 SaRtd3Pcie1Gpio[24]; - -/** Offset 0x0334 - Hybrid Graphics GPIO information for PEG 2 - Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs -**/ - UINT32 SaRtd3Pcie2Gpio[24]; - -/** Offset 0x0394 - Hybrid Graphics GPIO information for PEG 3 - Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs -**/ - UINT32 SaRtd3Pcie3Gpio[24]; - -/** Offset 0x03F4 - HG dGPU Power Delay - HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is - 300=300 microseconds -**/ - UINT16 HgDelayAfterPwrEn; - -/** Offset 0x03F6 - HG dGPU Reset Delay - HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 - microseconds -**/ - UINT16 HgDelayAfterHoldReset; - -/** Offset 0x03F8 - MMIO size adjustment for AUTO mode - Positive number means increasing MMIO size, Negative value means decreasing MMIO - size: 0 (Default)=no change to AUTO mode MMIO size -**/ - UINT16 MmioSizeAdjustment; - -/** Offset 0x03FA - MMIO Size - Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB -**/ - UINT16 MmioSize; - -/** Offset 0x03FC - Tseg Size - Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build - 0x0400000:4MB, 0x01000000:16MB -**/ - UINT32 TsegSize; - -/** Offset 0x0400 - Enable/Disable MRC TXT dependency - When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): - MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization - $EN_DIS -**/ - UINT8 TxtImplemented; - -/** Offset 0x0401 - Skip external display device scanning - Enable: Do not scan for external display device, Disable (Default): Scan external - display devices - $EN_DIS -**/ - UINT8 SkipExtGfxScan; - -/** Offset 0x0402 - Generate BIOS Data ACPI Table - Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it - $EN_DIS -**/ - UINT8 BdatEnable; - -/** Offset 0x0403 - BdatTestType - Indicates the type of Memory Training data to populate into the BDAT ACPI table. - 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D -**/ - UINT8 BdatTestType; - -/** Offset 0x0404 - Detect External Graphics device for LegacyOpROM - Detect and report if external graphics device only support LegacyOpROM or not (to - support CSM auto-enable). Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 ScanExtGfxForLegacyOpRom; - -/** Offset 0x0405 - Lock PCU Thermal Management registers - Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 LockPTMregs; - -/** Offset 0x0406 - Enable/Disable DMI GEN3 Static EQ Phase1 programming - Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 DmiGen3ProgramStaticEq; - -/** Offset 0x0407 - Enable/Disable PEG 0 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg0Enable; - -/** Offset 0x0408 - Enable/Disable PEG 1 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg1Enable; - -/** Offset 0x0409 - Enable/Disable PEG 2 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg2Enable; - -/** Offset 0x040A - Enable/Disable PEG 3 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg3Enable; - -/** Offset 0x040B - PEG 0 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg0MaxLinkSpeed; - -/** Offset 0x040C - PEG 1 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg1MaxLinkSpeed; - -/** Offset 0x040D - PEG 2 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg2MaxLinkSpeed; - -/** Offset 0x040E - PEG 3 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg3MaxLinkSpeed; - -/** Offset 0x040F - PEG 0 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 - 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 -**/ - UINT8 Peg0MaxLinkWidth; - -/** Offset 0x0410 - PEG 1 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4 - 0:Auto, 1:x1, 2:x2, 3:x4 -**/ - UINT8 Peg1MaxLinkWidth; - -/** Offset 0x0411 - PEG 2 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg2MaxLinkWidth; - -/** Offset 0x0412 - PEG 3 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg3MaxLinkWidth; - -/** Offset 0x0413 - Power down unused lanes on PEG 0 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg0PowerDownUnusedLanes; - -/** Offset 0x0414 - Power down unused lanes on PEG 1 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg1PowerDownUnusedLanes; - -/** Offset 0x0415 - Power down unused lanes on PEG 2 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg2PowerDownUnusedLanes; - -/** Offset 0x0416 - Power down unused lanes on PEG 3 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg3PowerDownUnusedLanes; - -/** Offset 0x0417 - PCIe ASPM programming will happen in relation to the Oprom - Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): - Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after - Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume - 0:Before, 1:After -**/ - UINT8 InitPcieAspmAfterOprom; - -/** Offset 0x0418 - PCIe Disable Spread Spectrum Clocking - PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, - Disable SSC(0X1) - Disable SSC per platform design or for compliance testing - 0:Normal Operation, 1:Disable SSC -**/ - UINT8 PegDisableSpreadSpectrumClocking; - -/** Offset 0x0419 - DMI Gen3 Root port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 DmiGen3RootPortPreset[8]; - -/** Offset 0x0421 - DMI Gen3 End port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 DmiGen3EndPointPreset[8]; - -/** Offset 0x0429 - DMI Gen3 End port Hint values per lane - Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 DmiGen3EndPointHint[8]; - -/** Offset 0x0431 - DMI Gen3 RxCTLEp per-Bundle control - Range: 0-15, 0 is default for each bundle, must be specified based upon platform design -**/ - UINT8 DmiGen3RxCtlePeaking[4]; - -/** Offset 0x0435 - PEG Gen3 RxCTLEp per-Bundle control - Range: 0-15, 12 is default for each bundle, must be specified based upon platform design -**/ - UINT8 PegGen3RxCtlePeaking[10]; - -/** Offset 0x043F -**/ - UINT8 UnusedUpdSpace16; - -/** Offset 0x0440 - Memory data pointer for saved preset search results - The reference code will store the Gen3 Preset Search results in the SaDataHob's - PegData structure (SA_PEG_DATA) and platform code can save/restore this data to - skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 -**/ - UINT32 PegDataPtr; - -/** Offset 0x0444 - PEG PERST# GPIO information - The reference code will use the information in this structure in order to reset - PCIe Gen3 devices during equalization, if necessary -**/ - UINT8 PegGpioData[28]; - -/** Offset 0x0460 - DeEmphasis control for DMI - DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB - 0: -6dB, 1: -3.5dB -**/ - UINT8 DmiDeEmphasis; - -/** Offset 0x0461 - PCIe Hot Plug Enable/Disable per port - 0(Default): Disable, 1: Enable -**/ - UINT8 PegRootPortHPE[4]; - -/** Offset 0x0465 - DMI Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 DmiMaxLinkSpeed; - -/** Offset 0x0466 - DMI Equalization Phase 2 - DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): - AUTO - Use the current default method - 0:Disable phase2, 1:Enable phase2, 2:Auto -**/ - UINT8 DmiGen3EqPh2Enable; - -/** Offset 0x0467 - DMI Gen3 Equalization Phase3 - DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 DmiGen3EqPh3Method; - -/** Offset 0x0468 - Phase2 EQ enable on the PEG 0:1:0. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg0Gen3EqPh2Enable; - -/** Offset 0x0469 - Phase2 EQ enable on the PEG 0:1:1. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg1Gen3EqPh2Enable; - -/** Offset 0x046A - Phase2 EQ enable on the PEG 0:1:2. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg2Gen3EqPh2Enable; - -/** Offset 0x046B - Phase2 EQ enable on the PEG 0:1:3. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg3Gen3EqPh2Enable; - -/** Offset 0x046C - Phase3 EQ method on the PEG 0:1:0. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg0Gen3EqPh3Method; - -/** Offset 0x046D - Phase3 EQ method on the PEG 0:1:1. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg1Gen3EqPh3Method; - -/** Offset 0x046E - Phase3 EQ method on the PEG 0:1:2. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg2Gen3EqPh3Method; - -/** Offset 0x046F - Phase3 EQ method on the PEG 0:1:3. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg3Gen3EqPh3Method; - -/** Offset 0x0470 - Enable/Disable PEG GEN3 Static EQ Phase1 programming - Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 PegGen3ProgramStaticEq; - -/** Offset 0x0471 - PEG Gen3 SwEq Always Attempt - Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): - Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test - and generate new EQ values every boot, not recommended - 0:Disable, 1:Enable -**/ - UINT8 Gen3SwEqAlwaysAttempt; - -/** Offset 0x0472 - Select number of TxEq presets to test in the PCIe/DMI SwEq - Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test - Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the - current default method (Default)Auto will test Presets 7, 3, and 5. It is possible - for this default to change over time;using Auto will ensure Reference Code always - uses the latest default settings - 0:P7 P3 P5, 1:P0 to P9, 2:Auto -**/ - UINT8 Gen3SwEqNumberOfPresets; - -/** Offset 0x0473 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq - Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization - Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): - Use the current default - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Gen3SwEqEnableVocTest; - -/** Offset 0x0474 - PCIe Rx Compliance Testing Mode - Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): - PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; - it should only be set when doing PCIe compliance testing - $EN_DIS -**/ - UINT8 PegRxCemTestingMode; - -/** Offset 0x0475 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled - the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 -**/ - UINT8 PegRxCemLoopbackLane; - -/** Offset 0x0476 - Generate PCIe BDAT Margin Table - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin - data generation, Enable(0x1): Generate PCIe BDAT margin data - $EN_DIS -**/ - UINT8 PegGenerateBdatMarginTable; - -/** Offset 0x0477 - PCIe Non-Protocol Awareness for Rx Compliance Testing - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, - Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for - compliance testing - $EN_DIS -**/ - UINT8 PegRxCemNonProtocolAwareness; - -/** Offset 0x0478 - PCIe Override RxCTLE - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3RxCtleOverride; - -/** Offset 0x0479 - PEG Gen3 Root port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 PegGen3RootPortPreset[20]; - -/** Offset 0x048D - PEG Gen3 End port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 PegGen3EndPointPreset[20]; - -/** Offset 0x04A1 - PEG Gen3 End port Hint values per lane - Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 PegGen3EndPointHint[20]; - -/** Offset 0x04B5 -**/ - UINT8 UnusedUpdSpace17; - -/** Offset 0x04B6 - Jitter Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterDwellTime; - -/** Offset 0x04B8 - Jitter Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterErrorTarget; - -/** Offset 0x04BA - VOC Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 10000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocDwellTime; - -/** Offset 0x04BC - VOC Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 2. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocErrorTarget; - -/** Offset 0x04BE - Enable/Disable SA IPU - Enable(Default): Enable SA IPU, Disable: Disable SA IPU - $EN_DIS -**/ - UINT8 SaIpuEnable; - -/** Offset 0x04BF - IPU IMR Configuration - 0:IPU Camera, 1:IPU Gen Default is 0 - 0:IPU Camera, 1:IPU Gen -**/ - UINT8 SaIpuImrConfiguration; - -/** Offset 0x04C0 - IMGU CLKOUT Configuration - The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. - $EN_DIS -**/ - UINT8 ImguClkOutEn[5]; - -/** Offset 0x04C5 - CPU Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode -**/ - UINT8 CpuTraceHubMode; - -/** Offset 0x04C6 - CPU Trace Hub Memory Region 0 - CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg0Size; - -/** Offset 0x04C7 - CPU Trace Hub Memory Region 1 - CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg1Size; - -/** Offset 0x04C8 - Enable/Disable SA OcSupport - Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport - $EN_DIS -**/ - UINT8 SaOcSupport; - -/** Offset 0x04C9 - GT slice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtVoltageMode; - -/** Offset 0x04CA - Maximum GTs turbo ratio override - 0(Default)=Minimal/Auto, 42=Maximum -**/ - UINT8 GtMaxOcRatio; - -/** Offset 0x04CB -**/ - UINT8 UnusedUpdSpace18; - -/** Offset 0x04CC - The voltage offset applied to GT slice - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 GtVoltageOffset; - -/** Offset 0x04CE - The GT slice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtVoltageOverride; - -/** Offset 0x04D0 - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtExtraTurboVoltage; - -/** Offset 0x04D2 - voltage offset applied to the SA - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 SaVoltageOffset; - -/** Offset 0x04D4 - Realtime Memory Timing - 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform - realtime memory timing changes after MRC_DONE. - 0: Disabled, 1: Enabled -**/ - UINT8 RealtimeMemoryTiming; - -/** Offset 0x04D5 - TCSS Thunderbolt PCIE Root Port 0 Enable - Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie0En; - -/** Offset 0x04D6 - TCSS Thunderbolt PCIE Root Port 1 Enable - Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie1En; - -/** Offset 0x04D7 - TCSS Thunderbolt PCIE Root Port 2 Enable - Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie2En; - -/** Offset 0x04D8 - TCSS Thunderbolt PCIE Root Port 3 Enable - Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie3En; - -/** Offset 0x04D9 - TCSS USB HOST (xHCI) Enable - Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below - $EN_DIS -**/ - UINT8 TcssXhciEn; - -/** Offset 0x04DA - TCSS USB DEVICE (xDCI) Enable - Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled - $EN_DIS -**/ - UINT8 TcssXdciEn; - -/** Offset 0x04DB - TCSS DMA0 Enable - Set TCSS DMA0. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssDma0En; - -/** Offset 0x04DC - TCSS DMA1 Enable - Set TCSS DMA1. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssDma1En; - -/** Offset 0x04DD - This is policy to control iTBT PCIe Multiple Segment setting. - When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the - TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 PcieMultipleSegmentEnabled; - -/** Offset 0x04DE - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS -**/ - UINT8 CridEnable; - -/** Offset 0x04DF - TCSS USB Port Enable - Bitmap for per port enabling -**/ - UINT8 UsbTcPortEnPreMem; - -/** Offset 0x04E0 - PEG IMR support - This option configures the IMR support for PEG.(def=Disable) - $EN_DIS -**/ - UINT8 PegImrEnable; - -/** Offset 0x04E1 - PEG Root port number for IMR. - PEG Root port number for IMR. -**/ - UINT8 PegImrRpSelection; - -/** Offset 0x04E2 - PEG IMR size - The size of IMR to be allocated for PEG EndPoint device -**/ - UINT16 PegImrSize; - -/** Offset 0x04E4 - Enable above 4GB MMIO resource support - Enable/disable above 4GB MMIO resource support - $EN_DIS -**/ - UINT8 EnableAbove4GBMmio; - -/** Offset 0x04E5 -**/ - UINT8 SaPreMemRsvd[31]; - -/** Offset 0x0504 - HECI Timeouts - 0: Disable, 1: Enable (Default) timeout check for HECI - $EN_DIS -**/ - UINT8 HeciTimeouts; - -/** Offset 0x0505 - Force ME DID Init Status - Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set - ME DID init stat value - $EN_DIS -**/ - UINT8 DidInitStat; - -/** Offset 0x0506 - CPU Replaced Polling Disable - Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop - $EN_DIS -**/ - UINT8 DisableCpuReplacedPolling; - -/** Offset 0x0507 - ME DID Message - Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent - the DID message from being sent) - $EN_DIS -**/ - UINT8 SendDidMsg; - -/** Offset 0x0508 - Check HECI message before send - Test, 0: disable, 1: enable, Enable/Disable message check. - $EN_DIS -**/ - UINT8 DisableMessageCheck; - -/** Offset 0x0509 - Skip MBP HOB - Test, 0: disable, 1: enable, Enable/Disable MOB HOB. - $EN_DIS -**/ - UINT8 SkipMbpHob; - -/** Offset 0x050A - HECI2 Interface Communication - Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. - $EN_DIS -**/ - UINT8 HeciCommunication2; - -/** Offset 0x050B - Enable KT device - Test, 0: disable, 1: enable, Enable or Disable KT device. - $EN_DIS -**/ - UINT8 KtDeviceEnable; - -/** Offset 0x050C - HECI1 BAR address - BAR address of HECI1 -**/ - UINT32 Heci1BarAddress; - -/** Offset 0x0510 - HECI2 BAR address - BAR address of HECI2 -**/ - UINT32 Heci2BarAddress; - -/** Offset 0x0514 - HECI3 BAR address - BAR address of HECI3 -**/ - UINT32 Heci3BarAddress; - -/** Offset 0x0518 -**/ - UINT8 MePreMemRsvd[16]; - -/** Offset 0x0528 - PCH Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode -**/ - UINT8 PchTraceHubMode; - -/** Offset 0x0529 - PCH Trace Hub Memory Region 0 buffer Size - Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg0Size; - -/** Offset 0x052A - PCH Trace Hub Memory Region 1 buffer Size - Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg1Size; - -/** Offset 0x052B - Enable SMBus - Enable/disable SMBus controller. - $EN_DIS -**/ - UINT8 SmbusEnable; - -/** Offset 0x052C - Enable SMBus ARP support - Enable SMBus ARP support. - $EN_DIS -**/ - UINT8 SmbusArpEnable; - -/** Offset 0x052D - Smbus dynamic power gating - Disable or Enable Smbus dynamic power gating. - $EN_DIS -**/ - UINT8 SmbusDynamicPowerGating; - -/** Offset 0x052E - SMBUS SPD Write Disable - Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write - Disable bit. For security recommendations, SPD write disable bit must be set. - $EN_DIS -**/ - UINT8 SmbusSpdWriteDisable; - -/** Offset 0x052F - Enable SMBus Alert Pin - Enable SMBus Alert Pin. - $EN_DIS -**/ - UINT8 PchSmbAlertEnable; - -/** Offset 0x0530 - SMBUS Base Address - SMBUS Base Address (IO space). -**/ - UINT16 PchSmbusIoBase; - -/** Offset 0x0532 - Number of RsvdSmbusAddressTable. - The number of elements in the RsvdSmbusAddressTable. -**/ - UINT8 PchNumRsvdSmbusAddresses; - -/** Offset 0x0533 -**/ - UINT8 UnusedUpdSpace19; - -/** Offset 0x0534 - Point of RsvdSmbusAddressTable - Array of addresses reserved for non-ARP-capable SMBus devices. -**/ - UINT32 RsvdSmbusAddressTablePtr; - -/** Offset 0x0538 - DCI Enable - Determine if to enable DCI debug from host - $EN_DIS -**/ - UINT8 DciEn; - -/** Offset 0x0539 - Enable DCI ModPHY Pwoer Gate - Enable ModPHY Pwoer Gate when DCI is enabled - $EN_DIS -**/ - UINT8 DciModphyPg; - -/** Offset 0x053A - DCI DbC Mode - Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: - Set both USB2/3DBCEN; No Change: Comply with HW value,for PCH-LP ICL U/Y board - with D0 stepping need to Disable it by default - 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change -**/ - UINT8 DciDbcMode; - -/** Offset 0x053B - USB3 Type-C UFP2DFP Kernel/Platform Debug Support - This BIOS option enables kernel and platform debug for USB3 interface over a UFP - Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DciUsb3TypecUfpDbg; - -/** Offset 0x053C - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpEnableMask; - -/** Offset 0x0540 - Enable PCIe IMR - 0:Disable, 1:Enable - $EN_DIS -**/ - UINT8 PcieImrEnabled; - -/** Offset 0x0541 -**/ - UINT8 UnusedUpdSpace20; - -/** Offset 0x0542 - Size of PCIe IMR. - Size of PCIe IMR in megabytes -**/ - UINT16 PcieImrSize; - -/** Offset 0x0544 - Root port number for IMR. - Root port number for IMR. -**/ - UINT8 ImrRpSelection; - -/** Offset 0x0545 - Enable PCH HSIO PCIE Rx Set Ctle - Enable PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtleEnable[24]; - -/** Offset 0x055D - PCH HSIO PCIE Rx Set Ctle Value - PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtle[24]; - -/** Offset 0x0575 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; - -/** Offset 0x058D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; - -/** Offset 0x05A5 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; - -/** Offset 0x05BD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; - -/** Offset 0x05D5 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; - -/** Offset 0x05ED - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; - -/** Offset 0x0605 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; - -/** Offset 0x061D - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value - PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen1DeEmph[24]; - -/** Offset 0x0635 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; - -/** Offset 0x064D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; - -/** Offset 0x0665 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; - -/** Offset 0x067D - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; - -/** Offset 0x0695 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; - -/** Offset 0x069D - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen1EqBoostMag[8]; - -/** Offset 0x06A5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; - -/** Offset 0x06AD - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen2EqBoostMag[8]; - -/** Offset 0x06B5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; - -/** Offset 0x06BD - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen3EqBoostMag[8]; - -/** Offset 0x06C5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; - -/** Offset 0x06CD - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmp[8]; - -/** Offset 0x06D5 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; - -/** Offset 0x06DD - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmp[8]; - -/** Offset 0x06E5 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; - -/** Offset 0x06ED - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmp[8]; - -/** Offset 0x06F5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DeEmphEnable[8]; - -/** Offset 0x06FD - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen1DeEmph[8]; - -/** Offset 0x0705 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DeEmphEnable[8]; - -/** Offset 0x070D - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen2DeEmph[8]; - -/** Offset 0x0715 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DeEmphEnable[8]; - -/** Offset 0x071D - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen3DeEmph[8]; - -/** Offset 0x0725 - ChipsetInit HECI message - DEPRECATED - $EN_DIS -**/ - UINT8 ChipsetInitMessage; - -/** Offset 0x0726 - Bypass ChipsetInit sync reset. - DEPRECATED - $EN_DIS -**/ - UINT8 BypassPhySyncReset; - -/** Offset 0x0727 - PCH LPC Enhance the port 8xh decoding - Original LPC only decodes one byte of port 80h. - $EN_DIS -**/ - UINT8 PchLpcEnhancePort8xhDecoding; - -/** Offset 0x0728 - PCH Port80 Route - Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. - $EN_DIS -**/ - UINT8 PchPort80Route; - -/** Offset 0x0729 - Disable and Lock Watch Dog Register - Set 1 to clear WDT status, then disable and lock WDT registers. - $EN_DIS -**/ - UINT8 WdtDisableAndLock; - -/** Offset 0x072A - Enable Intel HD Audio (Azalia) - 0: Disable, 1: Enable (Default) Azalia controller - $EN_DIS -**/ - UINT8 PchHdaEnable; - -/** Offset 0x072B - Enable PCH ISH Controller - 0: Disable, 1: Enable (Default) ISH Controller - $EN_DIS -**/ - UINT8 PchIshEnable; - -/** Offset 0x072C - Platform Debug Consent - To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. - Enabling this BIOS option may alter the default value of other debug-related BIOS - options.\Manual: Do not use Platform Debug Consent to override other debug-relevant - policies, but the user must set each debug option manually, aimed at advanced users.\n - Note: DCI OOB (aka BSSB) uses CCA probe - 0:Disabled, 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled - (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual -**/ - UINT8 PlatformDebugConsent; - -/** Offset 0x072D - Debug Interfaces - Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, - BIT2 - Not used. -**/ - UINT8 PcdDebugInterfaceFlags; - -/** Offset 0x072E - Serial Io Uart Debug Controller Number - Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT - Core interface, it cannot be used for debug purpose. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 -**/ - UINT8 SerialIoUartDebugControllerNumber; - -/** Offset 0x072F - Serial Io Uart Debug Auto Flow - Enables UART hardware flow control, CTS and RTS lines. - $EN_DIS -**/ - UINT8 SerialIoUartDebugAutoFlow; - -/** Offset 0x0730 - Serial Io Uart Debug BaudRate - Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, - 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 -**/ - UINT32 SerialIoUartDebugBaudRate; - -/** Offset 0x0734 - Serial Io Uart Debug Parity - Set default Parity. - 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity -**/ - UINT8 SerialIoUartDebugParity; - -/** Offset 0x0735 - Serial Io Uart Debug Stop Bits - Set default stop bits. - 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits -**/ - UINT8 SerialIoUartDebugStopBits; - -/** Offset 0x0736 - Serial Io Uart Debug Data Bits - Set default word length. 0: Default, 5,6,7,8 - 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS -**/ - UINT8 SerialIoUartDebugDataBits; - -/** Offset 0x0737 - ISA Serial Base selection - Select ISA Serial Base address. Default is 0x3F8. - 0:0x3F8, 1:0x2F8 -**/ - UINT8 PcdIsaSerialUartBase; - -/** Offset 0x0738 - PcdSerialDebugBaudRate - Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. - 3:9600, 4:19200, 6:56700, 7:115200 -**/ - UINT8 PcdSerialDebugBaudRate; - -/** Offset 0x0739 -**/ - UINT8 UnusedUpdSpace21; - -/** Offset 0x073A - Post Code Output Port - This option configures Post Code Output Port -**/ - UINT16 PostCodeOutputPort; - -/** Offset 0x073C -**/ - UINT8 PchPreMemRsvd[32]; - -/** Offset 0x075C - Write Drive Strength/Equalization 2D - Enables/Disable Write Drive Strength/Equalization 2D - $EN_DIS -**/ - UINT8 WRDSEQT; - -/** Offset 0x075D -**/ - UINT8 UnusedUpdSpace22[4]; - -/** Offset 0x0761 -**/ - UINT8 ReservedFspmUpd[15]; -} FSP_M_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPM_ARCH_UPD FspmArchUpd; - -/** Offset 0x0040 -**/ - FSP_M_CONFIG FspmConfig; - -/** Offset 0x0770 -**/ - UINT8 UnusedUpdSpace23[6]; - -/** Offset 0x0776 -**/ - UINT16 UpdTerminator; -} FSPM_UPD; - -#pragma pack() - -#endif |