diff options
Diffstat (limited to 'src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h')
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h | 3019 |
1 files changed, 0 insertions, 3019 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h deleted file mode 100644 index 962463e425..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h +++ /dev/null @@ -1,3019 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -#include <MemInfoHob.h> - -/// -/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. -/// -typedef struct { - UINT8 Revision; ///< Chipset Init Info Revision - UINT8 Rsvd[3]; ///< Reserved - UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table - UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table -} CHIPSET_INIT_INFO; - - -/** Fsp M Configuration -**/ -typedef struct { - -/** Offset 0x0040 - Platform Reserved Memory Size - The minimum platform memory size required to pass control into DXE -**/ - UINT64 PlatformMemorySize; - -/** Offset 0x0048 - Memory SPD Pointer Channel 0 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr00; - -/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr01; - -/** Offset 0x0050 - Memory SPD Pointer Channel 1 Dimm 0 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr10; - -/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 1 - Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 -**/ - UINT32 MemorySpdPtr11; - -/** Offset 0x0058 - SPD Data Length - Length of SPD Data - 0x100:256 Bytes, 0x200:512 Bytes -**/ - UINT16 MemorySpdDataLen; - -/** Offset 0x005A - Dq Byte Map CH0 - Dq byte mapping between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqByteMapCh0[12]; - -/** Offset 0x0066 - Dq Byte Map CH1 - Dq byte mapping between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqByteMapCh1[12]; - -/** Offset 0x0072 - Dqs Map CPU to DRAM CH 0 - Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent -**/ - UINT8 DqsMapCpu2DramCh0[8]; - -/** Offset 0x007A - Dqs Map CPU to DRAM CH 1 - Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent -**/ - UINT8 DqsMapCpu2DramCh1[8]; - -/** Offset 0x0082 - RcompResistor settings - Indicates RcompResistor settings: CML - 0's means MRC auto configured based on - Design Guidelines, otherwise input an Ohmic value per segment. CFL will need to - provide the appropriate values. -**/ - UINT16 RcompResistor[3]; - -/** Offset 0x0088 - RcompTarget settings - RcompTarget settings: CML - 0's mean MRC auto configured based on Design Guidelines, - otherwise input an Ohmic value per segment. CFL will need to provide the appropriate values. -**/ - UINT16 RcompTarget[5]; - -/** Offset 0x0092 - Dqs Pins Interleaved Setting - Indicates DqPinsInterleaved setting: board-dependent - $EN_DIS -**/ - UINT8 DqPinsInterleaved; - -/** Offset 0x0093 - VREF_CA - CA Vref routing: board-dependent - 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, - 2:VREF_CA to CH_A and VREF_DQ_B to CH_B -**/ - UINT8 CaVrefConfig; - -/** Offset 0x0094 - Smram Mask - The SMM Regions AB-SEG and/or H-SEG reserved - 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both -**/ - UINT8 SmramMask; - -/** Offset 0x0095 - Time Measure - Time Measure: 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 MrcTimeMeasure; - -/** Offset 0x0096 - MRC Fast Boot - Enables/Disable the MRC fast path thru the MRC - $EN_DIS -**/ - UINT8 MrcFastBoot; - -/** Offset 0x0097 - Rank Margin Tool per Task - This option enables the user to execute Rank Margin Tool per major training step - in the MRC. - $EN_DIS -**/ - UINT8 RmtPerTask; - -/** Offset 0x0098 - Training Trace - This option enables the trained state tracing feature in MRC. This feature will - print out the key training parameters state across major training steps. - $EN_DIS -**/ - UINT8 TrainTrace; - -/** Offset 0x0099 -**/ - UINT8 UnusedUpdSpace0[3]; - -/** Offset 0x009C - Intel Enhanced Debug - Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied - 0 : Disable, 0x400000 : Enable -**/ - UINT32 IedSize; - -/** Offset 0x00A0 - Tseg Size - Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build - 0x0400000:4MB, 0x01000000:16MB -**/ - UINT32 TsegSize; - -/** Offset 0x00A4 - MMIO Size - Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB -**/ - UINT16 MmioSize; - -/** Offset 0x00A6 - Probeless Trace - Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. - This also requires IED to be enabled. - $EN_DIS -**/ - UINT8 ProbelessTrace; - -/** Offset 0x00A7 - GDXC IOT SIZE - Size of IOT and MOT is in 8 MB chunks -**/ - UINT8 GdxcIotSize; - -/** Offset 0x00A8 - GDXC MOT SIZE - Size of IOT and MOT is in 8 MB chunks -**/ - UINT8 GdxcMotSize; - -/** Offset 0x00A9 - Spd Address Tabl - Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used - if SPD Address is 00 -**/ - UINT8 SpdAddressTable[4]; - -/** Offset 0x00AD - Internal Graphics Pre-allocated Memory - Size of memory preallocated for internal graphics. - 0x00:0 MB, 0x01:32 MB, 0x02:64 MB -**/ - UINT8 IgdDvmt50PreAlloc; - -/** Offset 0x00AE - Internal Graphics - Enable/disable internal graphics. - $EN_DIS -**/ - UINT8 InternalGfx; - -/** Offset 0x00AF - Aperture Size - Select the Aperture Size. - 0:128 MB, 1:256 MB, 2:512 MB -**/ - UINT8 ApertureSize; - -/** Offset 0x00B0 - Board Type - MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile - Halo, 7=UP Server - 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server -**/ - UINT8 UserBd; - -/** Offset 0x00B1 - SA GV - System Agent dynamic frequency support and when enabled memory will be training - at two different frequencies. Only effects ULX/ULT CPUs. 0=Disabled, 1=FixedLow, - 2=FixedHigh, and 3=Enabled. - 0:Disabled, 1:FixedLow, 2:FixedHigh, 3:Enabled -**/ - UINT8 SaGv; - -/** Offset 0x00B2 - DDR Frequency Limit - Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk, - i.e. divide by 133 or 100 - 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133, - 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto -**/ - UINT16 DdrFreqLimit; - -/** Offset 0x00B4 - Low Frequency - SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, - 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 FreqSaGvLow; - -/** Offset 0x00B6 - Rank Margin Tool - Enable/disable Rank Margin Tool. - $EN_DIS -**/ - UINT8 RMT; - -/** Offset 0x00B7 - Channel A DIMM Control - Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel0; - -/** Offset 0x00B8 - Channel B DIMM Control - Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. - 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs -**/ - UINT8 DisableDimmChannel1; - -/** Offset 0x00B9 - Scrambler Support - This option enables data scrambling in memory. - $EN_DIS -**/ - UINT8 ScramblerSupport; - -/** Offset 0x00BA - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. </b>0: Initialize; <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x00BB - SPD Profile Selected - Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP - Profile 1, 3=XMP Profile 2 - 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 -**/ - UINT8 SpdProfileSelected; - -/** Offset 0x00BC - Memory Reference Clock - 100MHz, 133MHz. - 0:133MHz, 1:100MHz -**/ - UINT8 RefClk; - -/** Offset 0x00BD -**/ - UINT8 UnusedUpdSpace1; - -/** Offset 0x00BE - Memory Voltage - Memory Voltage Override (Vddq). Default = no override - 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 - Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts -**/ - UINT16 VddVoltage; - -/** Offset 0x00C0 - Memory Ratio - Automatic or the frequency will equal ratio times reference clock. Set to Auto to - recalculate memory timings listed below. - 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 -**/ - UINT8 Ratio; - -/** Offset 0x00C1 - QCLK Odd Ratio - Adds 133 or 100 MHz to QCLK frequency, depending on RefClk - $EN_DIS -**/ - UINT8 OddRatioMode; - -/** Offset 0x00C2 - tCL - CAS Latency, 0: AUTO, max: 31 -**/ - UINT8 tCL; - -/** Offset 0x00C3 - tCWL - Min CAS Write Latency Delay Time, 0: AUTO, max: 34 -**/ - UINT8 tCWL; - -/** Offset 0x00C4 - tRCD/tRP - RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 -**/ - UINT8 tRCDtRP; - -/** Offset 0x00C5 - tRRD - Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 -**/ - UINT8 tRRD; - -/** Offset 0x00C6 - tFAW - Min Four Activate Window Delay Time, 0: AUTO, max: 63 -**/ - UINT16 tFAW; - -/** Offset 0x00C8 - tRAS - RAS Active Time, 0: AUTO, max: 64 -**/ - UINT16 tRAS; - -/** Offset 0x00CA - tREFI - Refresh Interval, 0: AUTO, max: 65535 -**/ - UINT16 tREFI; - -/** Offset 0x00CC - tRFC - Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 -**/ - UINT16 tRFC; - -/** Offset 0x00CE - tRTP - Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal - values: 5, 6, 7, 8, 9, 10, 12 -**/ - UINT8 tRTP; - -/** Offset 0x00CF - tWR - Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, - 20, 24, 30, 34, 40 - 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, - 34:34, 40:40 -**/ - UINT8 tWR; - -/** Offset 0x00D0 - tWTR - Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 -**/ - UINT8 tWTR; - -/** Offset 0x00D1 - NMode - System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N -**/ - UINT8 NModeSupport; - -/** Offset 0x00D2 - DllBwEn[0] - DllBwEn[0], for 1067 (0..7) -**/ - UINT8 DllBwEn0; - -/** Offset 0x00D3 - DllBwEn[1] - DllBwEn[1], for 1333 (0..7) -**/ - UINT8 DllBwEn1; - -/** Offset 0x00D4 - DllBwEn[2] - DllBwEn[2], for 1600 (0..7) -**/ - UINT8 DllBwEn2; - -/** Offset 0x00D5 - DllBwEn[3] - DllBwEn[3], for 1867 and up (0..7) -**/ - UINT8 DllBwEn3; - -/** Offset 0x00D6 - ISVT IO Port Address - ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default -**/ - UINT8 IsvtIoPort; - -/** Offset 0x00D7 - Margin Limit Check - Margin Limit Check. Choose level of margin check - 0:Disable, 1:L1, 2:L2, 3:Both -**/ - UINT8 MarginLimitCheck; - -/** Offset 0x00D8 - Margin Limit L2 - % of L1 check for margin limit check -**/ - UINT16 MarginLimitL2; - -/** Offset 0x00DA - CPU Trace Hub Mode - Select 'Target Debugger' if Trace Hub is used by target debugger software or 'Disable' - trace hub functionality. - 0: Disable, 1:Target Debugger Mode -**/ - UINT8 CpuTraceHubMode; - -/** Offset 0x00DB - CPU Trace Hub Memory Region 0 - CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg0Size; - -/** Offset 0x00DC - CPU Trace Hub Memory Region 1 - CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg1Size; - -/** Offset 0x00DD - Enable or Disable Peci C10 Reset command - Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message - to disable peci reset on C10 exit. The default value is <b>0: Disable</b> for CNL, - and <b>1: Enable</b> for all other CPU's - $EN_DIS -**/ - UINT8 PeciC10Reset; - -/** Offset 0x00DE - Enable or Disable Peci Sx Reset command - Enable or Disable Peci Sx Reset command; <b>0: Disable;</b> 1: Enable. - $EN_DIS -**/ - UINT8 PeciSxReset; - -/** Offset 0x00DF - HECI Timeouts - 0: Disable, 1: Enable (Default) timeout check for HECI - $EN_DIS -**/ - UINT8 HeciTimeouts; - -/** Offset 0x00E0 - HECI1 BAR address - BAR address of HECI1 -**/ - UINT32 Heci1BarAddress; - -/** Offset 0x00E4 - HECI2 BAR address - BAR address of HECI2 -**/ - UINT32 Heci2BarAddress; - -/** Offset 0x00E8 - HECI3 BAR address - BAR address of HECI3 -**/ - UINT32 Heci3BarAddress; - -/** Offset 0x00EC - SG dGPU Power Delay - SG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is - 300=300 microseconds -**/ - UINT16 SgDelayAfterPwrEn; - -/** Offset 0x00EE - SG dGPU Reset Delay - SG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 - microseconds -**/ - UINT16 SgDelayAfterHoldReset; - -/** Offset 0x00F0 - MMIO size adjustment for AUTO mode - Positive number means increasing MMIO size, Negative value means decreasing MMIO - size: 0 (Default)=no change to AUTO mode MMIO size -**/ - UINT16 MmioSizeAdjustment; - -/** Offset 0x00F2 - Enable/Disable DMI GEN3 Static EQ Phase1 programming - Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 DmiGen3ProgramStaticEq; - -/** Offset 0x00F3 - Enable/Disable PEG 0 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg0Enable; - -/** Offset 0x00F4 - Enable/Disable PEG 1 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg1Enable; - -/** Offset 0x00F5 - Enable/Disable PEG 2 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg2Enable; - -/** Offset 0x00F6 - Enable/Disable PEG 3 - Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits - it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 Peg3Enable; - -/** Offset 0x00F7 - PEG 0 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg0MaxLinkSpeed; - -/** Offset 0x00F8 - PEG 1 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg1MaxLinkSpeed; - -/** Offset 0x00F9 - PEG 2 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg2MaxLinkSpeed; - -/** Offset 0x00FA - PEG 3 Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 Peg3MaxLinkSpeed; - -/** Offset 0x00FB - PEG 0 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 - 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 -**/ - UINT8 Peg0MaxLinkWidth; - -/** Offset 0x00FC - PEG 1 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2, (0x3):Limit Link to x4 - 0:Auto, 1:x1, 2:x2, 3:x4 -**/ - UINT8 Peg1MaxLinkWidth; - -/** Offset 0x00FD - PEG 2 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg2MaxLinkWidth; - -/** Offset 0x00FE - PEG 3 Max Link Width - Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): - Limit Link to x2 - 0:Auto, 1:x1, 2:x2 -**/ - UINT8 Peg3MaxLinkWidth; - -/** Offset 0x00FF - Power down unused lanes on PEG 0 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg0PowerDownUnusedLanes; - -/** Offset 0x0100 - Power down unused lanes on PEG 1 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg1PowerDownUnusedLanes; - -/** Offset 0x0101 - Power down unused lanes on PEG 2 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg2PowerDownUnusedLanes; - -/** Offset 0x0102 - Power down unused lanes on PEG 3 - (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based - on the max possible link width - 0:No power saving, 1:Auto -**/ - UINT8 Peg3PowerDownUnusedLanes; - -/** Offset 0x0103 - PCIe ASPM programming will happen in relation to the Oprom - Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): - Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after - Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume - 0:Before, 1:After -**/ - UINT8 InitPcieAspmAfterOprom; - -/** Offset 0x0104 - PCIe Disable Spread Spectrum Clocking - PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, - Disable SSC(0X1) - Disable SSC per platform design or for compliance testing - 0:Normal Operation, 1:Disable SSC -**/ - UINT8 PegDisableSpreadSpectrumClocking; - -/** Offset 0x0105 - DMI Gen3 Root port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 DmiGen3RootPortPreset[8]; - -/** Offset 0x010D - DMI Gen3 End port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 DmiGen3EndPointPreset[8]; - -/** Offset 0x0115 - DMI Gen3 End port Hint values per lane - Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 DmiGen3EndPointHint[8]; - -/** Offset 0x011D - DMI Gen3 RxCTLEp per-Bundle control - Range: 0-15, 0 is default for each bundle, must be specified based upon platform design -**/ - UINT8 DmiGen3RxCtlePeaking[4]; - -/** Offset 0x0121 - Thermal Velocity Boost Ratio clipping - 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction - caused by high package temperatures for processors that implement the Intel Thermal - Velocity Boost (TVB) feature - 0: Disabled, 1: Enabled -**/ - UINT8 TvbRatioClipping; - -/** Offset 0x0122 - Thermal Velocity Boost voltage optimization - 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations - for processors that implement the Intel Thermal Velocity Boost (TVB) feature. - 0: Disabled, 1: Enabled -**/ - UINT8 TvbVoltageOptimization; - -/** Offset 0x0123 - PEG Gen3 RxCTLEp per-Bundle control - Range: 0-15, 12 is default for each bundle, must be specified based upon platform design -**/ - UINT8 PegGen3RxCtlePeaking[10]; - -/** Offset 0x012D -**/ - UINT8 UnusedUpdSpace2[3]; - -/** Offset 0x0130 - Memory data pointer for saved preset search results - The reference code will store the Gen3 Preset Search results in the SaDataHob's - PegData structure (SA_PEG_DATA) and platform code can save/restore this data to - skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 -**/ - UINT32 PegDataPtr; - -/** Offset 0x0134 - PEG PERST# GPIO information - The reference code will use the information in this structure in order to reset - PCIe Gen3 devices during equalization, if necessary -**/ - UINT8 PegGpioData[28]; - -/** Offset 0x0150 - PCIe Hot Plug Enable/Disable per port - 0(Default): Disable, 1: Enable -**/ - UINT8 PegRootPortHPE[4]; - -/** Offset 0x0154 - DeEmphasis control for DMI - DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB - 0: -6dB, 1: -3.5dB -**/ - UINT8 DmiDeEmphasis; - -/** Offset 0x0155 - Selection of the primary display device - 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics - 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics -**/ - UINT8 PrimaryDisplay; - -/** Offset 0x0156 - Selection of iGFX GTT Memory size - 1=2MB, 2=4MB, 3=8MB, Default is 3 - 1:2MB, 2:4MB, 3:8MB -**/ - UINT16 GttSize; - -/** Offset 0x0158 - Temporary MMIO address for GMADR - The reference code will use this as Temporary MMIO address space to access GMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to - (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress - - 0x1) (Where ApertureSize = 256MB) -**/ - UINT32 GmAdr; - -/** Offset 0x015C - Temporary MMIO address for GTTMMADR - The reference code will use this as Temporary MMIO address space to access GTTMMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr - to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO - + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) -**/ - UINT32 GttMmAdr; - -/** Offset 0x0160 - Selection of PSMI Region size - 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 - 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB -**/ - UINT8 PsmiRegionSize; - -/** Offset 0x0161 - Switchable Graphics GPIO information for PEG 0 - Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie0Gpio[24]; - -/** Offset 0x0179 - Switchable Graphics GPIO information for PEG 1 - Switchable Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie1Gpio[24]; - -/** Offset 0x0191 - Switchable Graphics GPIO information for PEG 2 - Switchable Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie2Gpio[24]; - -/** Offset 0x01A9 - Switchable Graphics GPIO information for PEG 3 - Switchable Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs -**/ - UINT8 SaRtd3Pcie3Gpio[24]; - -/** Offset 0x01C1 - Enable/Disable MRC TXT dependency - When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): - MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization - $EN_DIS -**/ - UINT8 TxtImplemented; - -/** Offset 0x01C2 - Enable/Disable SA OcSupport - Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport - $EN_DIS -**/ - UINT8 SaOcSupport; - -/** Offset 0x01C3 - GT slice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtVoltageMode; - -/** Offset 0x01C4 - Maximum GTs turbo ratio override - 0(Default)=Minimal/Auto, 60=Maximum -**/ - UINT8 GtMaxOcRatio; - -/** Offset 0x01C5 -**/ - UINT8 UnusedUpdSpace3; - -/** Offset 0x01C6 - The voltage offset applied to GT slice - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 GtVoltageOffset; - -/** Offset 0x01C8 - The GT slice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtVoltageOverride; - -/** Offset 0x01CA - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtExtraTurboVoltage; - -/** Offset 0x01CC - voltage offset applied to the SA - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 SaVoltageOffset; - -/** Offset 0x01CE - PCIe root port Function number for Switchable Graphics dGPU - Root port Index number to indicate which PCIe root port has dGPU -**/ - UINT8 RootPortIndex; - -/** Offset 0x01CF - Realtime Memory Timing - 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform - realtime memory timing changes after MRC_DONE. - 0: Disabled, 1: Enabled -**/ - UINT8 RealtimeMemoryTiming; - -/** Offset 0x01D0 - Enable/Disable SA IPU - Enable(Default): Enable SA IPU, Disable: Disable SA IPU - $EN_DIS -**/ - UINT8 SaIpuEnable; - -/** Offset 0x01D1 - IPU IMR Configuration - 0:IPU Camera, 1:IPU Gen Default is 0 - 0:IPU Camera, 1:IPU Gen -**/ - UINT8 SaIpuImrConfiguration; - -/** Offset 0x01D2 - Selection of PSMI Support On/Off - 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support - $EN_DIS -**/ - UINT8 GtPsmiSupport; - -/** Offset 0x01D3 - GT unslice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtusVoltageMode; - -/** Offset 0x01D4 - voltage offset applied to GT unslice - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusVoltageOffset; - -/** Offset 0x01D6 - GT unslice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusVoltageOverride; - -/** Offset 0x01D8 - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtusExtraTurboVoltage; - -/** Offset 0x01DA - Maximum GTus turbo ratio override - 0(Default)=Minimal, 60=Maximum -**/ - UINT8 GtusMaxOcRatio; - -/** Offset 0x01DB - SaPreMemProductionRsvd - Reserved for SA Pre-Mem Production - $EN_DIS -**/ - UINT8 SaPreMemProductionRsvd[3]; - -/** Offset 0x01DE - BIST on Reset - Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 BistOnReset; - -/** Offset 0x01DF - Skip Stop PBET Timer Enable/Disable - Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 SkipStopPbet; - -/** Offset 0x01E0 - C6DRAM power gating feature - This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM - power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating - feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. - $EN_DIS -**/ - UINT8 EnableC6Dram; - -/** Offset 0x01E1 - Over clocking support - Over clocking support; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 OcSupport; - -/** Offset 0x01E2 - Over clocking Lock - Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 OcLock; - -/** Offset 0x01E3 - Maximum Core Turbo Ratio Override - Maximum core turbo ratio override allows to increase CPU core frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 -**/ - UINT8 CoreMaxOcRatio; - -/** Offset 0x01E4 - Core voltage mode - Core voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 CoreVoltageMode; - -/** Offset 0x01E5 - Program Cache Attributes - Program Cache Attributes; <b>0: Program</b>; 1: Disable Program. - $EN_DIS -**/ - UINT8 DisableMtrrProgram; - -/** Offset 0x01E6 - Maximum clr turbo ratio override - Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 -**/ - UINT8 RingMaxOcRatio; - -/** Offset 0x01E7 - Hyper Threading Enable/Disable - Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 HyperThreading; - -/** Offset 0x01E8 - CPU ratio value - CPU ratio value. Valid Range 0 to 63. CPU Ratio is 0 when disabled. -**/ - UINT8 CpuRatio; - -/** Offset 0x01E9 - Boot frequency - Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- - <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo - is selected BIOS will start in max non-turbo mode and switch to Turbo mode. - 0:0, 1:1, 2:2 -**/ - UINT8 BootFrequency; - -/** Offset 0x01EA - Number of active cores - Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: - 2 </b>;<b>3: 3 </b> - 0:All, 1:1, 2:2, 3:3 -**/ - UINT8 ActiveCoreCount; - -/** Offset 0x01EB - Processor Early Power On Configuration FCLK setting - <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- - 2: 400 MHz. - 3: Reserved - 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved -**/ - UINT8 FClkFrequency; - -/** Offset 0x01EC - Set JTAG power in C10 and deeper power states - False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 - and deeper power states for debug purpose. <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 JtagC10PowerGateDisable; - -/** Offset 0x01ED - Enable or Disable VMX - Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 VmxEnable; - -/** Offset 0x01EE - AVX2 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx2RatioOffset; - -/** Offset 0x01EF - AVX3 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx3RatioOffset; - -/** Offset 0x01F0 - BCLK Adaptive Voltage Enable - When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: - Disable;<b> 1: Enable - $EN_DIS -**/ - UINT8 BclkAdaptiveVoltage; - -/** Offset 0x01F1 - Core PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 CorePllVoltageOffset; - -/** Offset 0x01F2 - core voltage override - The core voltage override which is applied to the entire range of cpu core frequencies. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageOverride; - -/** Offset 0x01F4 - Core Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageAdaptive; - -/** Offset 0x01F6 - Core Turbo voltage Offset - The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 -**/ - UINT16 CoreVoltageOffset; - -/** Offset 0x01F8 - Ring Downbin - Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.0: Disable; <b>1: Enable.</b> - $EN_DIS -**/ - UINT8 RingDownBin; - -/** Offset 0x01F9 - Ring voltage mode - Ring voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 RingVoltageMode; - -/** Offset 0x01FA - Ring voltage override - The ring voltage override which is applied to the entire range of cpu ring frequencies. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageOverride; - -/** Offset 0x01FC - Ring Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageAdaptive; - -/** Offset 0x01FE - Ring Turbo voltage Offset - The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 -**/ - UINT16 RingVoltageOffset; - -/** Offset 0x0200 - TjMax Offset - TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support - TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 -**/ - UINT8 TjMaxOffset; - -/** Offset 0x0201 - BiosGuard - Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable - $EN_DIS -**/ - UINT8 BiosGuard; - -/** Offset 0x0202 -**/ - UINT8 BiosGuardToolsInterface; - -/** Offset 0x0203 - EnableSgx - Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control - 0: Disable, 1: Enable, 2: Software Control -**/ - UINT8 EnableSgx; - -/** Offset 0x0204 - Txt - Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable - $EN_DIS -**/ - UINT8 Txt; - -/** Offset 0x0205 -**/ - UINT8 UnusedUpdSpace4[3]; - -/** Offset 0x0208 - PrmrrSize - 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 -**/ - UINT32 PrmrrSize; - -/** Offset 0x020C - SinitMemorySize - Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable -**/ - UINT32 SinitMemorySize; - -/** Offset 0x0210 - TxtHeapMemorySize - Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable -**/ - UINT32 TxtHeapMemorySize; - -/** Offset 0x0214 - TxtDprMemorySize - Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable -**/ - UINT32 TxtDprMemorySize; - -/** Offset 0x0218 - TxtDprMemoryBase - Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable -**/ - UINT64 TxtDprMemoryBase; - -/** Offset 0x0220 - BiosAcmBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 BiosAcmBase; - -/** Offset 0x0224 - BiosAcmSize - Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable -**/ - UINT32 BiosAcmSize; - -/** Offset 0x0228 - ApStartupBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 ApStartupBase; - -/** Offset 0x022C - TgaSize - Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable -**/ - UINT32 TgaSize; - -/** Offset 0x0230 - TxtLcpPdBase - Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable -**/ - UINT64 TxtLcpPdBase; - -/** Offset 0x0238 - TxtLcpPdSize - Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable -**/ - UINT64 TxtLcpPdSize; - -/** Offset 0x0240 - IsTPMPresence - IsTPMPresence default values -**/ - UINT8 IsTPMPresence; - -/** Offset 0x0241 - ReservedSecurityPreMem - Reserved for Security Pre-Mem - $EN_DIS -**/ - UINT8 ReservedSecurityPreMem[3]; - -/** Offset 0x0244 - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddress[3]; - -/** Offset 0x0250 - Enable SMBus - Enable/disable SMBus controller. - $EN_DIS -**/ - UINT8 SmbusEnable; - -/** Offset 0x0251 - Platform Debug Consent - To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. - Enabling this BIOS option may alter the default value of other debug-related BIOS - options. Note: DCI OOB (aka BSSB) uses CCA probe; [DCI OOB+DbC] and [USB2 DbC] - have the same setting - 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), - 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC) -**/ - UINT8 PlatformDebugConsent; - -/** Offset 0x0252 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support - This BIOS option enables kernel and platform debug for USB3 interface over a UFP - Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DciUsb3TypecUfpDbg; - -/** Offset 0x0253 - PCH Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode -**/ - UINT8 PchTraceHubMode; - -/** Offset 0x0254 - PCH Trace Hub Memory Region 0 buffer Size - Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg0Size; - -/** Offset 0x0255 - PCH Trace Hub Memory Region 1 buffer Size - Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg1Size; - -/** Offset 0x0256 - Enable Intel HD Audio (Azalia) - 0: Disable, 1: Enable (Default) Azalia controller - $EN_DIS -**/ - UINT8 PchHdaEnable; - -/** Offset 0x0257 - Enable PCH ISH Controller - 0: Disable, 1: Enable (Default) ISH Controller - $EN_DIS -**/ - UINT8 PchIshEnable; - -/** Offset 0x0258 - Enable PCH HSIO PCIE Rx Set Ctle - Enable PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtleEnable[24]; - -/** Offset 0x0270 - PCH HSIO PCIE Rx Set Ctle Value - PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtle[24]; - -/** Offset 0x0288 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; - -/** Offset 0x02A0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; - -/** Offset 0x02B8 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; - -/** Offset 0x02D0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; - -/** Offset 0x02E8 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; - -/** Offset 0x0300 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; - -/** Offset 0x0318 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; - -/** Offset 0x0330 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value - PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen1DeEmph[24]; - -/** Offset 0x0348 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; - -/** Offset 0x0360 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; - -/** Offset 0x0378 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; - -/** Offset 0x0390 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; - -/** Offset 0x03A8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; - -/** Offset 0x03B0 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen1EqBoostMag[8]; - -/** Offset 0x03B8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; - -/** Offset 0x03C0 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen2EqBoostMag[8]; - -/** Offset 0x03C8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; - -/** Offset 0x03D0 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen3EqBoostMag[8]; - -/** Offset 0x03D8 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; - -/** Offset 0x03E0 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmp[8]; - -/** Offset 0x03E8 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; - -/** Offset 0x03F0 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmp[8]; - -/** Offset 0x03F8 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; - -/** Offset 0x0400 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmp[8]; - -/** Offset 0x0408 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DeEmphEnable[8]; - -/** Offset 0x0410 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen1DeEmph[8]; - -/** Offset 0x0418 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DeEmphEnable[8]; - -/** Offset 0x0420 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen2DeEmph[8]; - -/** Offset 0x0428 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DeEmphEnable[8]; - -/** Offset 0x0430 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen3DeEmph[8]; - -/** Offset 0x0438 - PCH LPC Enhance the port 8xh decoding - Original LPC only decodes one byte of port 80h. - $EN_DIS -**/ - UINT8 PchLpcEnhancePort8xhDecoding; - -/** Offset 0x0439 - PCH Port80 Route - Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. - $EN_DIS -**/ - UINT8 PchPort80Route; - -/** Offset 0x043A - Enable SMBus ARP support - Enable SMBus ARP support. - $EN_DIS -**/ - UINT8 SmbusArpEnable; - -/** Offset 0x043B - Number of RsvdSmbusAddressTable. - The number of elements in the RsvdSmbusAddressTable. -**/ - UINT8 PchNumRsvdSmbusAddresses; - -/** Offset 0x043C - SMBUS Base Address - SMBUS Base Address (IO space). -**/ - UINT16 PchSmbusIoBase; - -/** Offset 0x043E - Size of PCIe IMR. - Size of PCIe IMR in megabytes -**/ - UINT16 PcieImrSize; - -/** Offset 0x0440 - Point of RsvdSmbusAddressTable - Array of addresses reserved for non-ARP-capable SMBus devices. -**/ - UINT32 RsvdSmbusAddressTablePtr; - -/** Offset 0x0444 - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpEnableMask; - -/** Offset 0x0448 - Enable PCIe IMR - 0:Disable, 1:Enable - $EN_DIS -**/ - UINT8 PcieImrEnabled; - -/** Offset 0x0449 - Root port number for IMR. - Root port number for IMR. -**/ - UINT8 ImrRpSelection; - -/** Offset 0x044A - Enable SMBus Alert Pin - Enable SMBus Alert Pin. - $EN_DIS -**/ - UINT8 PchSmbAlertEnable; - -/** Offset 0x044B - Debug Interfaces - Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, - BIT2 - Not used. -**/ - UINT8 PcdDebugInterfaceFlags; - -/** Offset 0x044C - Serial Io Uart Debug Controller Number - Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT - Core interface, it cannot be used for debug purpose. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 -**/ - UINT8 SerialIoUartDebugControllerNumber; - -/** Offset 0x044D - Serial Io Uart Debug Auto Flow - Enables UART hardware flow control, CTS and RTS lines. - $EN_DIS -**/ - UINT8 SerialIoUartDebugAutoFlow; - -/** Offset 0x044E -**/ - UINT8 UnusedUpdSpace5[2]; - -/** Offset 0x0450 - Serial Io Uart Debug BaudRate - Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, - 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 -**/ - UINT32 SerialIoUartDebugBaudRate; - -/** Offset 0x0454 - Serial Io Uart Debug Parity - Set default Parity. - 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity -**/ - UINT8 SerialIoUartDebugParity; - -/** Offset 0x0455 - Serial Io Uart Debug Stop Bits - Set default stop bits. - 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits -**/ - UINT8 SerialIoUartDebugStopBits; - -/** Offset 0x0456 - Serial Io Uart Debug Data Bits - Set default word length. 0: Default, 5,6,7,8 - 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS -**/ - UINT8 SerialIoUartDebugDataBits; - -/** Offset 0x0457 - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. - $EN_DIS -**/ - UINT8 PchHdaDspEnable; - -/** Offset 0x0458 - VC Type - Virtual Channel Type Select: 0: VC0, 1: VC1. - 0: VC0, 1: VC1 -**/ - UINT8 PchHdaVcType; - -/** Offset 0x0459 - Universal Audio Architecture compliance for DSP enabled system - 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox - driver or SST driver supported). - $EN_DIS -**/ - UINT8 PchHdaDspUaaCompliance; - -/** Offset 0x045A - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkHda; - -/** Offset 0x045B - Enable HD Audio DMIC0 Link - Deprecated. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic0; - -/** Offset 0x045C - Enable HD Audio DMIC1 Link - Deprecated. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic1; - -/** Offset 0x045D - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp0; - -/** Offset 0x045E - Enable HD Audio SSP1 Link - Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp1; - -/** Offset 0x045F - Enable HD Audio SSP2 Link - Enable/disable HD Audio SSP2/I2S link. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp2; - -/** Offset 0x0460 - Enable HD Audio SoundWire#1 Link - Enable/disable HD Audio SNDW1 link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw1; - -/** Offset 0x0461 - Enable HD Audio SoundWire#2 Link - Enable/disable HD Audio SNDW2 link. Muxed with SSP1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw2; - -/** Offset 0x0462 - Enable HD Audio SoundWire#3 Link - Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw3; - -/** Offset 0x0463 - Enable HD Audio SoundWire#4 Link - Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw4; - -/** Offset 0x0464 - Soundwire Clock Buffer GPIO RCOMP Setting - 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. - $EN_DIS -**/ - UINT8 PchHdaSndwBufferRcomp; - -/** Offset 0x0465 - ReservedPchPreMem - Reserved for Pch Pre-Mem - $EN_DIS -**/ - UINT8 ReservedPchPreMem[2]; - -/** Offset 0x0467 - ISA Serial Base selection - Select ISA Serial Base address. Default is 0x3F8. - 0:0x3F8, 1:0x2F8 -**/ - UINT8 PcdIsaSerialUartBase; - -/** Offset 0x0468 - GT PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 GtPllVoltageOffset; - -/** Offset 0x0469 - Ring PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 RingPllVoltageOffset; - -/** Offset 0x046A - System Agent PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 SaPllVoltageOffset; - -/** Offset 0x046B - Memory Controller PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 McPllVoltageOffset; - -/** Offset 0x046C - MRC Safe Config - Enables/Disable MRC Safe Config - $EN_DIS -**/ - UINT8 MrcSafeConfig; - -/** Offset 0x046D - PcdSerialDebugBaudRate - Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. - 3:9600, 4:19200, 6:56700, 7:115200 -**/ - UINT8 PcdSerialDebugBaudRate; - -/** Offset 0x046E - HobBufferSize - Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB - total HOB size). - 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value -**/ - UINT8 HobBufferSize; - -/** Offset 0x046F - Early Command Training - Enables/Disable Early Command Training - $EN_DIS -**/ - UINT8 ECT; - -/** Offset 0x0470 - SenseAmp Offset Training - Enables/Disable SenseAmp Offset Training - $EN_DIS -**/ - UINT8 SOT; - -/** Offset 0x0471 - Early ReadMPR Timing Centering 2D - Enables/Disable Early ReadMPR Timing Centering 2D - $EN_DIS -**/ - UINT8 ERDMPRTC2D; - -/** Offset 0x0472 - Read MPR Training - Enables/Disable Read MPR Training - $EN_DIS -**/ - UINT8 RDMPRT; - -/** Offset 0x0473 - Receive Enable Training - Enables/Disable Receive Enable Training - $EN_DIS -**/ - UINT8 RCVET; - -/** Offset 0x0474 - Jedec Write Leveling - Enables/Disable Jedec Write Leveling - $EN_DIS -**/ - UINT8 JWRL; - -/** Offset 0x0475 - Early Write Time Centering 2D - Enables/Disable Early Write Time Centering 2D - $EN_DIS -**/ - UINT8 EWRTC2D; - -/** Offset 0x0476 - Early Read Time Centering 2D - Enables/Disable Early Read Time Centering 2D - $EN_DIS -**/ - UINT8 ERDTC2D; - -/** Offset 0x0477 - Write Timing Centering 1D - Enables/Disable Write Timing Centering 1D - $EN_DIS -**/ - UINT8 WRTC1D; - -/** Offset 0x0478 - Write Voltage Centering 1D - Enables/Disable Write Voltage Centering 1D - $EN_DIS -**/ - UINT8 WRVC1D; - -/** Offset 0x0479 - Read Timing Centering 1D - Enables/Disable Read Timing Centering 1D - $EN_DIS -**/ - UINT8 RDTC1D; - -/** Offset 0x047A - Dimm ODT Training - Enables/Disable Dimm ODT Training - $EN_DIS -**/ - UINT8 DIMMODTT; - -/** Offset 0x047B - DIMM RON Training - Enables/Disable DIMM RON Training - $EN_DIS -**/ - UINT8 DIMMRONT; - -/** Offset 0x047C - Write Drive Strength/Equalization 2D - Enables/Disable Write Drive Strength/Equalization 2D - $EN_DIS -**/ - UINT8 WRDSEQT; - -/** Offset 0x047D - Write Slew Rate Training - Enables/Disable Write Slew Rate Training - $EN_DIS -**/ - UINT8 WRSRT; - -/** Offset 0x047E - Read ODT Training - Enables/Disable Read ODT Training - $EN_DIS -**/ - UINT8 RDODTT; - -/** Offset 0x047F - Read Equalization Training - Enables/Disable Read Equalization Training - $EN_DIS -**/ - UINT8 RDEQT; - -/** Offset 0x0480 - Read Amplifier Training - Enables/Disable Read Amplifier Training - $EN_DIS -**/ - UINT8 RDAPT; - -/** Offset 0x0481 - Write Timing Centering 2D - Enables/Disable Write Timing Centering 2D - $EN_DIS -**/ - UINT8 WRTC2D; - -/** Offset 0x0482 - Read Timing Centering 2D - Enables/Disable Read Timing Centering 2D - $EN_DIS -**/ - UINT8 RDTC2D; - -/** Offset 0x0483 - Write Voltage Centering 2D - Enables/Disable Write Voltage Centering 2D - $EN_DIS -**/ - UINT8 WRVC2D; - -/** Offset 0x0484 - Read Voltage Centering 2D - Enables/Disable Read Voltage Centering 2D - $EN_DIS -**/ - UINT8 RDVC2D; - -/** Offset 0x0485 - Command Voltage Centering - Enables/Disable Command Voltage Centering - $EN_DIS -**/ - UINT8 CMDVC; - -/** Offset 0x0486 - Late Command Training - Enables/Disable Late Command Training - $EN_DIS -**/ - UINT8 LCT; - -/** Offset 0x0487 - Round Trip Latency Training - Enables/Disable Round Trip Latency Training - $EN_DIS -**/ - UINT8 RTL; - -/** Offset 0x0488 - Turn Around Timing Training - Enables/Disable Turn Around Timing Training - $EN_DIS -**/ - UINT8 TAT; - -/** Offset 0x0489 - Memory Test - Enables/Disable Memory Test - $EN_DIS -**/ - UINT8 MEMTST; - -/** Offset 0x048A - DIMM SPD Alias Test - Enables/Disable DIMM SPD Alias Test - $EN_DIS -**/ - UINT8 ALIASCHK; - -/** Offset 0x048B - Receive Enable Centering 1D - Enables/Disable Receive Enable Centering 1D - $EN_DIS -**/ - UINT8 RCVENC1D; - -/** Offset 0x048C - Retrain Margin Check - Enables/Disable Retrain Margin Check - $EN_DIS -**/ - UINT8 RMC; - -/** Offset 0x048D - Write Drive Strength Up/Dn independently - Enables/Disable Write Drive Strength Up/Dn independently - $EN_DIS -**/ - UINT8 WRDSUDT; - -/** Offset 0x048E - ECC Support - Enables/Disable ECC Support - $EN_DIS -**/ - UINT8 EccSupport; - -/** Offset 0x048F - Memory Remap - Enables/Disable Memory Remap - $EN_DIS -**/ - UINT8 RemapEnable; - -/** Offset 0x0490 - Rank Interleave support - Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at - the same time. - $EN_DIS -**/ - UINT8 RankInterleave; - -/** Offset 0x0491 - Enhanced Interleave support - Enables/Disable Enhanced Interleave support - $EN_DIS -**/ - UINT8 EnhancedInterleave; - -/** Offset 0x0492 - Memory Trace - Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of - equal size. This option may change TOLUD and REMAP values as needed. - $EN_DIS -**/ - UINT8 MemoryTrace; - -/** Offset 0x0493 - Ch Hash Support - Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode - $EN_DIS -**/ - UINT8 ChHashEnable; - -/** Offset 0x0494 - Extern Therm Status - Enables/Disable Extern Therm Status - $EN_DIS -**/ - UINT8 EnableExtts; - -/** Offset 0x0495 - Closed Loop Therm Manage - Enables/Disable Closed Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableCltm; - -/** Offset 0x0496 - Open Loop Therm Manage - Enables/Disable Open Loop Therm Manage - $EN_DIS -**/ - UINT8 EnableOltm; - -/** Offset 0x0497 - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter - $EN_DIS -**/ - UINT8 EnablePwrDn; - -/** Offset 0x0498 - DDR PowerDown and idle counter - LPDDR - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) - $EN_DIS -**/ - UINT8 EnablePwrDnLpddr; - -/** Offset 0x0499 - Use user provided power weights, scale factor, and channel power floor values - Enables/Disable Use user provided power weights, scale factor, and channel power - floor values - $EN_DIS -**/ - UINT8 UserPowerWeightsEn; - -/** Offset 0x049A - RAPL PL Lock - Enables/Disable RAPL PL Lock - $EN_DIS -**/ - UINT8 RaplLim2Lock; - -/** Offset 0x049B - RAPL PL 2 enable - Enables/Disable RAPL PL 2 enable - $EN_DIS -**/ - UINT8 RaplLim2Ena; - -/** Offset 0x049C - RAPL PL 1 enable - Enables/Disable RAPL PL 1 enable - $EN_DIS -**/ - UINT8 RaplLim1Ena; - -/** Offset 0x049D - SelfRefresh Enable - Enables/Disable SelfRefresh Enable - $EN_DIS -**/ - UINT8 SrefCfgEna; - -/** Offset 0x049E - Throttler CKEMin Defeature - LPDDR - Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeatLpddr; - -/** Offset 0x049F - Throttler CKEMin Defeature - Enables/Disable Throttler CKEMin Defeature - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeat; - -/** Offset 0x04A0 - Enable RH Prevention - Enables/Disable RH Prevention - $EN_DIS -**/ - UINT8 RhPrevention; - -/** Offset 0x04A1 - Exit On Failure (MRC) - Enables/Disable Exit On Failure (MRC) - $EN_DIS -**/ - UINT8 ExitOnFailure; - -/** Offset 0x04A2 - LPDDR Thermal Sensor - Enables/Disable LPDDR Thermal Sensor - $EN_DIS -**/ - UINT8 DdrThermalSensor; - -/** Offset 0x04A3 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedClock; - -/** Offset 0x04A4 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedZq; - -/** Offset 0x04A5 -**/ - UINT8 UnusedUpdSpace6; - -/** Offset 0x04A6 - Ch Hash Mask - Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to - BITS [19:6 -**/ - UINT16 ChHashMask; - -/** Offset 0x04A8 - Base reference clock value - Base reference clock value, in Hertz(Default is 125Hz) - 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz -**/ - UINT32 BClkFrequency; - -/** Offset 0x04AC - Ch Hash Interleaved Bit - Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave - the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 - 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 -**/ - UINT8 ChHashInterleaveBit; - -/** Offset 0x04AD - Energy Scale Factor - Energy Scale Factor, Default is 4 -**/ - UINT8 EnergyScaleFact; - -/** Offset 0x04AE - EPG DIMM Idd3N - Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on - a per DIMM basis. Default is 26 -**/ - UINT16 Idd3n; - -/** Offset 0x04B0 - EPG DIMM Idd3P - Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated - on a per DIMM basis. Default is 11 -**/ - UINT16 Idd3p; - -/** Offset 0x04B2 - CMD Slew Rate Training - Enable/Disable CMD Slew Rate Training - $EN_DIS -**/ - UINT8 CMDSR; - -/** Offset 0x04B3 - CMD Drive Strength and Tx Equalization - Enable/Disable CMD Drive Strength and Tx Equalization - $EN_DIS -**/ - UINT8 CMDDSEQ; - -/** Offset 0x04B4 - CMD Normalization - Enable/Disable CMD Normalization - $EN_DIS -**/ - UINT8 CMDNORM; - -/** Offset 0x04B5 - Early DQ Write Drive Strength and Equalization Training - Enable/Disable Early DQ Write Drive Strength and Equalization Training - $EN_DIS -**/ - UINT8 EWRDSEQ; - -/** Offset 0x04B6 - RH Activation Probability - RH Activation Probability, Probability value is 1/2^(inputvalue) -**/ - UINT8 RhActProbability; - -/** Offset 0x04B7 - RAPL PL 2 WindowX - Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def) -**/ - UINT8 RaplLim2WindX; - -/** Offset 0x04B8 - RAPL PL 2 WindowY - Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def) -**/ - UINT8 RaplLim2WindY; - -/** Offset 0x04B9 - RAPL PL 1 WindowX - Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindX; - -/** Offset 0x04BA - RAPL PL 1 WindowY - Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) -**/ - UINT8 RaplLim1WindY; - -/** Offset 0x04BB -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x04BC - RAPL PL 2 Power - range[0;2^14-1]= [2047.875;0]in W, (222= Def) -**/ - UINT16 RaplLim2Pwr; - -/** Offset 0x04BE - RAPL PL 1 Power - range[0;2^14-1]= [2047.875;0]in W, (0= Def) -**/ - UINT16 RaplLim1Pwr; - -/** Offset 0x04C0 - Warm Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh0Dimm0; - -/** Offset 0x04C1 - Warm Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh0Dimm1; - -/** Offset 0x04C2 - Warm Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh1Dimm0; - -/** Offset 0x04C3 - Warm Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 WarmThresholdCh1Dimm1; - -/** Offset 0x04C4 - Hot Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh0Dimm0; - -/** Offset 0x04C5 - Hot Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh0Dimm1; - -/** Offset 0x04C6 - Hot Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh1Dimm0; - -/** Offset 0x04C7 - Hot Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 -**/ - UINT8 HotThresholdCh1Dimm1; - -/** Offset 0x04C8 - Warm Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm0; - -/** Offset 0x04C9 - Warm Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh0Dimm1; - -/** Offset 0x04CA - Warm Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm0; - -/** Offset 0x04CB - Warm Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 WarmBudgetCh1Dimm1; - -/** Offset 0x04CC - Hot Budget Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm0; - -/** Offset 0x04CD - Hot Budget Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh0Dimm1; - -/** Offset 0x04CE - Hot Budget Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm0; - -/** Offset 0x04CF - Hot Budget Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM -**/ - UINT8 HotBudgetCh1Dimm1; - -/** Offset 0x04D0 - Idle Energy Ch0Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm0; - -/** Offset 0x04D1 - Idle Energy Ch0Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh0Dimm1; - -/** Offset 0x04D2 - Idle Energy Ch1Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm0; - -/** Offset 0x04D3 - Idle Energy Ch1Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyCh1Dimm1; - -/** Offset 0x04D4 - PowerDown Energy Ch0Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm0; - -/** Offset 0x04D5 - PowerDown Energy Ch0Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh0Dimm1; - -/** Offset 0x04D6 - PowerDown Energy Ch1Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm0; - -/** Offset 0x04D7 - PowerDown Energy Ch1Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) -**/ - UINT8 PdEnergyCh1Dimm1; - -/** Offset 0x04D8 - Activate Energy Ch0Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm0; - -/** Offset 0x04D9 - Activate Energy Ch0Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh0Dimm1; - -/** Offset 0x04DA - Activate Energy Ch1Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm0; - -/** Offset 0x04DB - Activate Energy Ch1Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyCh1Dimm1; - -/** Offset 0x04DC - Read Energy Ch0Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm0; - -/** Offset 0x04DD - Read Energy Ch0Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh0Dimm1; - -/** Offset 0x04DE - Read Energy Ch1Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm0; - -/** Offset 0x04DF - Read Energy Ch1Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyCh1Dimm1; - -/** Offset 0x04E0 - Write Energy Ch0Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm0; - -/** Offset 0x04E1 - Write Energy Ch0Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh0Dimm1; - -/** Offset 0x04E2 - Write Energy Ch1Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm0; - -/** Offset 0x04E3 - Write Energy Ch1Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyCh1Dimm1; - -/** Offset 0x04E4 - Throttler CKEMin Timer - Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). - Default is 0x30 -**/ - UINT8 ThrtCkeMinTmr; - -/** Offset 0x04E5 - Cke Rank Mapping - Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies - which rank CKE[i] goes to. -**/ - UINT8 CkeRankMapping; - -/** Offset 0x04E6 - Rapl Power Floor Ch0 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh0; - -/** Offset 0x04E7 - Rapl Power Floor Ch1 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh1; - -/** Offset 0x04E8 - Command Rate Support - CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs - 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS -**/ - UINT8 EnCmdRate; - -/** Offset 0x04E9 - REFRESH_2X_MODE - 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot - 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only -**/ - UINT8 Refresh2X; - -/** Offset 0x04EA - Energy Performance Gain - Enable/disable(default) Energy Performance Gain. - $EN_DIS -**/ - UINT8 EpgEnable; - -/** Offset 0x04EB - Row Hammer Solution - Type of method used to prevent Row Hammer. Default is Hardware RHP - 0:Hardware RHP, 1:2x Refresh -**/ - UINT8 RhSolution; - -/** Offset 0x04EC - User Manual Threshold - Disabled: Predefined threshold will be used.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserThresholdEnable; - -/** Offset 0x04ED - User Manual Budget - Disabled: Configuration of memories will defined the Budget value.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserBudgetEnable; - -/** Offset 0x04EE - TcritMax - Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax - has to be greater than THIGHMax .\n - Critical temperature will be TcritMax -**/ - UINT8 TsodTcritMax; - -/** Offset 0x04EF - Event mode - Disable:Comparator mode.\n - Enable:Interrupt mode - $EN_DIS -**/ - UINT8 TsodEventMode; - -/** Offset 0x04F0 - EVENT polarity - Disable:Active LOW.\n - Enable:Active HIGH - $EN_DIS -**/ - UINT8 TsodEventPolarity; - -/** Offset 0x04F1 - Critical event only - Disable:Trips on alarm or critical.\n - Enable:Trips only if criticaal temperature is reached - $EN_DIS -**/ - UINT8 TsodCriticalEventOnly; - -/** Offset 0x04F2 - Event output control - Disable:Event output disable.\n - Enable:Event output enabled - $EN_DIS -**/ - UINT8 TsodEventOutputControl; - -/** Offset 0x04F3 - Alarm window lock bit - Disable:Alarm trips are not locked and can be changed.\n - Enable:Alarm trips are locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodAlarmwindowLockBit; - -/** Offset 0x04F4 - Critical trip lock bit - Disable:Critical trip is not locked and can be changed.\n - Enable:Critical trip is locked and cannot be changed - $EN_DIS -**/ - UINT8 TsodCriticaltripLockBit; - -/** Offset 0x04F5 - Shutdown mode - Disable:Temperature sensor enable.\n - Enable:Temperature sensor disable - $EN_DIS -**/ - UINT8 TsodShutdownMode; - -/** Offset 0x04F6 - ThighMax - Thigh = ThighMax (Default is 93) -**/ - UINT8 TsodThigMax; - -/** Offset 0x04F7 - User Manual Thig and Tcrit - Disabled(Default): Temperature will be given by the configuration of memories and - 1x or 2xrefresh rate.\n - Enabled: User Input will define for Thigh and Tcrit. - $EN_DIS -**/ - UINT8 TsodManualEnable; - -/** Offset 0x04F8 - Force OLTM or 2X Refresh when needed - Disabled(Default): = Force OLTM.\n - Enabled: = Force 2x Refresh. - $EN_DIS -**/ - UINT8 ForceOltmOrRefresh2x; - -/** Offset 0x04F9 - Pwr Down Idle Timer - The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means - AUTO: 64 for ULX/ULT, 128 for DT/Halo -**/ - UINT8 PwdwnIdleCounter; - -/** Offset 0x04FA - Bitmask of ranks that have CA bus terminated - Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, - Rank0 is terminating and Rank1 is non-terminating</b> -**/ - UINT8 CmdRanksTerminated; - -/** Offset 0x04FB - GDXC MOT enable - GDXC MOT enable. - $EN_DIS -**/ - UINT8 GdxcEnable; - -/** Offset 0x04FC - PcdSerialDebugLevel - Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose -**/ - UINT8 PcdSerialDebugLevel; - -/** Offset 0x04FD - Fivr Faults - Fivr Faults; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrFaults; - -/** Offset 0x04FE - Fivr Efficiency - Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrEfficiency; - -/** Offset 0x04FF - Safe Mode Support - This option configures the varous items in the IO and MC to be more conservative.(def=Disable) - $EN_DIS -**/ - UINT8 SafeMode; - -/** Offset 0x0500 - Ask MRC to clear memory content - Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. - $EN_DIS -**/ - UINT8 CleanMemory; - -/** Offset 0x0501 - LpDdrDqDqsReTraining - Enables/Disable LpDdrDqDqsReTraining - $EN_DIS -**/ - UINT8 LpDdrDqDqsReTraining; - -/** Offset 0x0502 - Post Code Output Port - This option configures Post Code Output Port -**/ - UINT16 PostCodeOutputPort; - -/** Offset 0x0504 - RMTLoopCount - Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO -**/ - UINT8 RMTLoopCount; - -/** Offset 0x0505 - BER Support - Enable/Disable the Rank Margin Tool interpolation/extrapolation. - 0:Disable, 1:Enable -**/ - UINT8 EnBER; - -/** Offset 0x0506 - Dual Dimm Per-Channel Board Type - Option to indicate if Board Layout includes One/Two DIMMs per channel. This is used - to limit maximum frequency for some SKUs. - 0:1DPC, 1:2DPC -**/ - UINT8 DualDimmPerChannelBoardType; - -/** Offset 0x0507 - DDR4 Mixed U-DIMM 2DPC Limitation - Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population. - Disable=0, Enable(Default)=1 - $EN_DIS -**/ - UINT8 Ddr4MixedUDimm2DpcLimit; - -/** Offset 0x0508 - CFL Reserved - Reserved FspmConfig CFL - $EN_DIS -**/ - UINT8 ReservedFspmUpdCfl[2]; - -/** Offset 0x050A - Memory Test on Warm Boot - Run Base Memory Test on Warm Boot - 0:Disable, 1:Enable -**/ - UINT8 MemTestOnWarmBoot; - -/** Offset 0x050B - Throttler CKEMin Timer - LPDDR - Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T + - BYTE_LENGTH (4). Default is 0x40 -**/ - UINT8 ThrtCkeMinTmrLpddr; - -/** Offset 0x050C - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOut; - -/** Offset 0x050D - MRC Force training on Warm - Enables/Disable the MRC training on warm boot - $EN_DIS -**/ - UINT8 MrcTrainOnWarm; - -/** Offset 0x050E - Lpddr Dram Odt - Override Enable/Disable for the ODT logic for LPDDR3 memory. Default is 2 (AUTO) - 0:Disable, 1:Enable, 2:AUTO -**/ - UINT8 LpddrDramOdt; - -/** Offset 0x050F - DDR4 Skip Refresh Enable - Enable/Disable of DDR4 Temperature Controlled Refresh on DRAM. Default is 1 (Enabled) - 0:Disable, 1:Enable -**/ - UINT8 Ddr4SkipRefreshEn; - -/** Offset 0x0510 - SerialDebugMrcLevel - MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose -**/ - UINT8 SerialDebugMrcLevel; - -/** Offset 0x0511 - Enable HD Audio Sndw Link IO Control - deprecated -**/ - UINT8 PchHdaSndwLinkIoControlEnabled[4]; - -/** Offset 0x0515 -**/ - UINT8 UnusedUpdSpace8[2]; - -/** Offset 0x0517 -**/ - UINT8 ReservedFspmUpd[1]; -} FSP_M_CONFIG; - -/** Fsp M Test Configuration -**/ -typedef struct { - -/** Offset 0x0518 -**/ - UINT32 Signature; - -/** Offset 0x051C - Skip external display device scanning - Enable: Do not scan for external display device, Disable (Default): Scan external - display devices - $EN_DIS -**/ - UINT8 SkipExtGfxScan; - -/** Offset 0x051D - Generate BIOS Data ACPI Table - Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it - $EN_DIS -**/ - UINT8 BdatEnable; - -/** Offset 0x051E - Detect External Graphics device for LegacyOpROM - Detect and report if external graphics device only support LegacyOpROM or not (to - support CSM auto-enable). Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 ScanExtGfxForLegacyOpRom; - -/** Offset 0x051F - Lock PCU Thermal Management registers - Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 LockPTMregs; - -/** Offset 0x0520 - DMI Max Link Speed - Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 - Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 DmiMaxLinkSpeed; - -/** Offset 0x0521 - DMI Equalization Phase 2 - DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): - AUTO - Use the current default method - 0:Disable phase2, 1:Enable phase2, 2:Auto -**/ - UINT8 DmiGen3EqPh2Enable; - -/** Offset 0x0522 - DMI Gen3 Equalization Phase3 - DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 DmiGen3EqPh3Method; - -/** Offset 0x0523 - Phase2 EQ enable on the PEG 0:1:0. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg0Gen3EqPh2Enable; - -/** Offset 0x0524 - Phase2 EQ enable on the PEG 0:1:1. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg1Gen3EqPh2Enable; - -/** Offset 0x0525 - Phase2 EQ enable on the PEG 0:1:2. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg2Gen3EqPh2Enable; - -/** Offset 0x0526 - Phase2 EQ enable on the PEG 0:1:3. - Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): - Enable phase 2, Auto(0x2)(Default): Use the current default method - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Peg3Gen3EqPh2Enable; - -/** Offset 0x0527 - Phase3 EQ method on the PEG 0:1:0. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg0Gen3EqPh3Method; - -/** Offset 0x0528 - Phase3 EQ method on the PEG 0:1:1. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg1Gen3EqPh3Method; - -/** Offset 0x0529 - Phase3 EQ method on the PEG 0:1:2. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg2Gen3EqPh3Method; - -/** Offset 0x052A - Phase3 EQ method on the PEG 0:1:3. - PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 Peg3Gen3EqPh3Method; - -/** Offset 0x052B - Enable/Disable PEG GEN3 Static EQ Phase1 programming - Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 PegGen3ProgramStaticEq; - -/** Offset 0x052C - PEG Gen3 SwEq Always Attempt - Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): - Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test - and generate new EQ values every boot, not recommended - 0:Disable, 1:Enable -**/ - UINT8 Gen3SwEqAlwaysAttempt; - -/** Offset 0x052D - Select number of TxEq presets to test in the PCIe/DMI SwEq - Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test - Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the - current default method (Default)Auto will test Presets 7, 3, and 5. It is possible - for this default to change over time;using Auto will ensure Reference Code always - uses the latest default settings - 0:P7 P3 P5, 1:P0 to P9, 2:Auto -**/ - UINT8 Gen3SwEqNumberOfPresets; - -/** Offset 0x052E - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq - Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization - Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): - Use the current default - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Gen3SwEqEnableVocTest; - -/** Offset 0x052F - PCIe Rx Compliance Testing Mode - Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): - PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; - it should only be set when doing PCIe compliance testing - $EN_DIS -**/ - UINT8 PegRxCemTestingMode; - -/** Offset 0x0530 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled - the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 -**/ - UINT8 PegRxCemLoopbackLane; - -/** Offset 0x0531 - Generate PCIe BDAT Margin Table - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin - data generation, Enable(0x1): Generate PCIe BDAT margin data - $EN_DIS -**/ - UINT8 PegGenerateBdatMarginTable; - -/** Offset 0x0532 - PCIe Non-Protocol Awareness for Rx Compliance Testing - Set this policy to enable the generation and addition of PCIe margin data to the - BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, - Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for - compliance testing - $EN_DIS -**/ - UINT8 PegRxCemNonProtocolAwareness; - -/** Offset 0x0533 - PCIe Override RxCTLE - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3RxCtleOverride; - -/** Offset 0x0534 - Rsvd - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3Rsvd; - -/** Offset 0x0535 - PEG Gen3 Root port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 PegGen3RootPortPreset[20]; - -/** Offset 0x0549 - PEG Gen3 End port preset values per lane - Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 PegGen3EndPointPreset[20]; - -/** Offset 0x055D - PEG Gen3 End port Hint values per lane - Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 PegGen3EndPointHint[20]; - -/** Offset 0x0571 -**/ - UINT8 UnusedUpdSpace9; - -/** Offset 0x0572 - Jitter Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterDwellTime; - -/** Offset 0x0574 - Jitter Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 1. @warning Do not change from the default -**/ - UINT16 Gen3SwEqJitterErrorTarget; - -/** Offset 0x0576 - VOC Dwell Time for PCIe Gen3 Software Equalization - Range: 0-65535, default is 10000. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocDwellTime; - -/** Offset 0x0578 - VOC Error Target for PCIe Gen3 Software Equalization - Range: 0-65535, default is 2. @warning Do not change from the default -**/ - UINT16 Gen3SwEqVocErrorTarget; - -/** Offset 0x057A - Panel Power Enable - Control for enabling/disabling VDD force bit (Required only for early enabling of - eDP panel). 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 PanelPowerEnable; - -/** Offset 0x057B - BdatTestType - Indicates the type of Memory Training data to populate into the BDAT ACPI table. - 0:Rank Margin Tool, 1:Margin2D -**/ - UINT8 BdatTestType; - -/** Offset 0x057C - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisable; - -/** Offset 0x057D -**/ - UINT8 UnusedUpdSpace10; - -/** Offset 0x057E - Delta T12 Power Cycle Delay required in ms - Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate - T12 Delay to max 500ms - 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay -**/ - UINT16 DeltaT12PowerCycleDelayPreMem; - -/** Offset 0x0580 - SaPreMemTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SaPreMemTestRsvd[9]; - -/** Offset 0x0589 -**/ - UINT8 UnusedUpdSpace11; - -/** Offset 0x058A - TotalFlashSize - Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable -**/ - UINT16 TotalFlashSize; - -/** Offset 0x058C - BiosSize - Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable -**/ - UINT16 BiosSize; - -/** Offset 0x058E - TxtAcheckRequest - Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. - $EN_DIS -**/ - UINT8 TxtAcheckRequest; - -/** Offset 0x058F - SecurityTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SecurityTestRsvd[3]; - -/** Offset 0x0592 - Smbus dynamic power gating - Disable or Enable Smbus dynamic power gating. - $EN_DIS -**/ - UINT8 SmbusDynamicPowerGating; - -/** Offset 0x0593 - Disable and Lock Watch Dog Register - Set 1 to clear WDT status, then disable and lock WDT registers. - $EN_DIS -**/ - UINT8 WdtDisableAndLock; - -/** Offset 0x0594 - SMBUS SPD Write Disable - Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write - Disable bit. For security recommendations, SPD write disable bit must be set. - $EN_DIS -**/ - UINT8 SmbusSpdWriteDisable; - -/** Offset 0x0595 - ReservedPchPreMemTest - Reserved for Pch Pre-Mem Test - $EN_DIS -**/ - UINT8 ReservedPchPreMemTest[16]; - -/** Offset 0x05A5 - Force ME DID Init Status - Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set - ME DID init stat value - $EN_DIS -**/ - UINT8 DidInitStat; - -/** Offset 0x05A6 - CPU Replaced Polling Disable - Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop - $EN_DIS -**/ - UINT8 DisableCpuReplacedPolling; - -/** Offset 0x05A7 - ME DID Message - Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent - the DID message from being sent) - $EN_DIS -**/ - UINT8 SendDidMsg; - -/** Offset 0x05A8 - Check HECI message before send - Test, 0: disable, 1: enable, Enable/Disable message check. - $EN_DIS -**/ - UINT8 DisableMessageCheck; - -/** Offset 0x05A9 - Skip MBP HOB - Test, 0: disable, 1: enable, Enable/Disable MOB HOB. - $EN_DIS -**/ - UINT8 SkipMbpHob; - -/** Offset 0x05AA - HECI2 Interface Communication - Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. - $EN_DIS -**/ - UINT8 HeciCommunication2; - -/** Offset 0x05AB - Enable KT device - Test, 0: disable, 1: enable, Enable or Disable KT device. - $EN_DIS -**/ - UINT8 KtDeviceEnable; - -/** Offset 0x05AC - tRd2RdSG - Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdSG; - -/** Offset 0x05AD - tRd2RdDG - Delay between Read-to-Read commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDG; - -/** Offset 0x05AE - tRd2RdDR - Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDR; - -/** Offset 0x05AF - tRd2RdDD - Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tRd2RdDD; - -/** Offset 0x05B0 - tWr2RdSG - Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86. -**/ - UINT8 tWr2RdSG; - -/** Offset 0x05B1 - tWr2RdDG - Delay between Write-to-Read commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDG; - -/** Offset 0x05B2 - tWr2RdDR - Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDR; - -/** Offset 0x05B3 - tWr2RdDD - Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tWr2RdDD; - -/** Offset 0x05B4 - tWr2WrSG - Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrSG; - -/** Offset 0x05B5 - tWr2WrDG - Delay between Write-to-Write commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDG; - -/** Offset 0x05B6 - tWr2WrDR - Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDR; - -/** Offset 0x05B7 - tWr2WrDD - Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tWr2WrDD; - -/** Offset 0x05B8 - tRd2WrSG - Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrSG; - -/** Offset 0x05B9 - tRd2WrDG - Delay between Read-to-Write commands in different Bank Group for DDR4. All other - DDR technologies should set this equal to SG. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDG; - -/** Offset 0x05BA - tRd2WrDR - Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDR; - -/** Offset 0x05BB - tRd2WrDD - Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. -**/ - UINT8 tRd2WrDD; - -/** Offset 0x05BC - tRRD_L - Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31 -**/ - UINT8 tRRD_L; - -/** Offset 0x05BD - tRRD_S - Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0: - AUTO, max: 31 -**/ - UINT8 tRRD_S; - -/** Offset 0x05BE - tWTR_L - Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0: - AUTO, max: 60 -**/ - UINT8 tWTR_L; - -/** Offset 0x05BF - tWTR_S - Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only. - 0: AUTO, max: 28 -**/ - UINT8 tWTR_S; - -/** Offset 0x05C0 -**/ - UINT8 ReservedFspmTestUpd[8]; -} FSP_M_TEST_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPM_ARCH_UPD FspmArchUpd; - -/** Offset 0x0040 -**/ - FSP_M_CONFIG FspmConfig; - -/** Offset 0x0518 -**/ - FSP_M_TEST_CONFIG FspmTestConfig; - -/** Offset 0x05C8 -**/ - UINT8 UnusedUpdSpace12[6]; - -/** Offset 0x05CE -**/ - UINT16 UpdTerminator; -} FSPM_UPD; - -#pragma pack() - -#endif |