1 files changed, 136 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h
new file mode 100644
index 0000000000..eeba7ae50b
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FsptUpd.h
@@ -0,0 +1,136 @@
+/** @file
+
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+  This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPTUPD_H__
+#define __FSPTUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+/** Fsp T Core UPD
+**/
+typedef struct {
+
+/** Offset 0x0020
+**/
+  UINT32                      MicrocodeRegionBase;
+
+/** Offset 0x0024
+**/
+  UINT32                      MicrocodeRegionSize;
+
+/** Offset 0x0028
+**/
+  UINT32                      CodeRegionBase;
+
+/** Offset 0x002C
+**/
+  UINT32                      CodeRegionSize;
+
+/** Offset 0x0030
+**/
+  UINT8                       Reserved[16];
+} FSPT_CORE_UPD;
+
+/** Fsp T Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - PcdSerialIoUartDebugEnable
+  Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. 
+  0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
+**/
+  UINT8                       PcdSerialIoUartDebugEnable;
+
+/** Offset 0x0041 - PcdSerialIoUartNumber - FSPT
+  Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+  Core interface, it cannot be used for debug purpose.
+  0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+  UINT8                       PcdSerialIoUartNumber;
+
+/** Offset 0x0042 - PcdSerialIoUart0PinMuxing - FSPT
+  Select SerialIo Uart0 pin muxing. Setting valid only if PcdSerialIoUartNumber is
+  set to UART0.
+  0:default pins, 1:pins muxed with CNV_BRI/RGI
+**/
+  UINT8                       PcdSerialIoUart0PinMuxing;
+
+/** Offset 0x0043
+**/
+  UINT8                       UnusedUpdSpace0;
+
+/** Offset 0x0044
+**/
+  UINT32                      PcdSerialIoUartInputClock;
+
+/** Offset 0x0048 - Pci Express Base Address
+  Base address to be programmed for Pci Express 
+**/
+  UINT64                      PcdPciExpressBaseAddress;
+
+/** Offset 0x0050 - Pci Express Region Length
+  Region Length to be programmed for Pci Express 
+**/
+  UINT32                      PcdPciExpressRegionLength;
+
+/** Offset 0x0054
+**/
+  UINT8                       ReservedFsptUpd1[44];
+} FSP_T_CONFIG;
+
+/** Fsp T UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+  FSP_UPD_HEADER              FspUpdHeader;
+
+/** Offset 0x0020
+**/
+  FSPT_CORE_UPD               FsptCoreUpd;
+
+/** Offset 0x0040
+**/
+  FSP_T_CONFIG                FsptConfig;
+
+/** Offset 0x0080
+**/
+  UINT16                      UpdTerminator;
+} FSPT_UPD;
+
+#pragma pack()
+
+#endif