diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/Ebc.h')
-rw-r--r-- | src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/Ebc.h | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/Ebc.h b/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/Ebc.h new file mode 100644 index 0000000000..ff28fcacb2 --- /dev/null +++ b/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/Ebc.h @@ -0,0 +1,308 @@ +/** @file + Describes the protocol interface to the EBC interpreter. + + Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __EFI_EBC_PROTOCOL_H__ +#define __EFI_EBC_PROTOCOL_H__ + +#define EFI_EBC_INTERPRETER_PROTOCOL_GUID \ + { \ + 0x13AC6DD1, 0x73D0, 0x11D4, {0xB0, 0x6B, 0x00, 0xAA, 0x00, 0xBD, 0x6D, 0xE7 } \ + } + +// +// Define OPCODES +// +#define OPCODE_BREAK 0x00 +#define OPCODE_JMP 0x01 +#define OPCODE_JMP8 0x02 +#define OPCODE_CALL 0x03 +#define OPCODE_RET 0x04 +#define OPCODE_CMPEQ 0x05 +#define OPCODE_CMPLTE 0x06 +#define OPCODE_CMPGTE 0x07 +#define OPCODE_CMPULTE 0x08 +#define OPCODE_CMPUGTE 0x09 +#define OPCODE_NOT 0x0A +#define OPCODE_NEG 0x0B +#define OPCODE_ADD 0x0C +#define OPCODE_SUB 0x0D +#define OPCODE_MUL 0x0E +#define OPCODE_MULU 0x0F +#define OPCODE_DIV 0x10 +#define OPCODE_DIVU 0x11 +#define OPCODE_MOD 0x12 +#define OPCODE_MODU 0x13 +#define OPCODE_AND 0x14 +#define OPCODE_OR 0x15 +#define OPCODE_XOR 0x16 +#define OPCODE_SHL 0x17 +#define OPCODE_SHR 0x18 +#define OPCODE_ASHR 0x19 +#define OPCODE_EXTNDB 0x1A +#define OPCODE_EXTNDW 0x1B +#define OPCODE_EXTNDD 0x1C +#define OPCODE_MOVBW 0x1D +#define OPCODE_MOVWW 0x1E +#define OPCODE_MOVDW 0x1F +#define OPCODE_MOVQW 0x20 +#define OPCODE_MOVBD 0x21 +#define OPCODE_MOVWD 0x22 +#define OPCODE_MOVDD 0x23 +#define OPCODE_MOVQD 0x24 +#define OPCODE_MOVSNW 0x25 // Move signed natural with word index +#define OPCODE_MOVSND 0x26 // Move signed natural with dword index +// +// #define OPCODE_27 0x27 +// +#define OPCODE_MOVQQ 0x28 // Does this go away? +#define OPCODE_LOADSP 0x29 +#define OPCODE_STORESP 0x2A +#define OPCODE_PUSH 0x2B +#define OPCODE_POP 0x2C +#define OPCODE_CMPIEQ 0x2D +#define OPCODE_CMPILTE 0x2E +#define OPCODE_CMPIGTE 0x2F +#define OPCODE_CMPIULTE 0x30 +#define OPCODE_CMPIUGTE 0x31 +#define OPCODE_MOVNW 0x32 +#define OPCODE_MOVND 0x33 +// +// #define OPCODE_34 0x34 +// +#define OPCODE_PUSHN 0x35 +#define OPCODE_POPN 0x36 +#define OPCODE_MOVI 0x37 +#define OPCODE_MOVIN 0x38 +#define OPCODE_MOVREL 0x39 + +// +// Bit masks for opcode encodings +// +#define OPCODE_M_OPCODE 0x3F // bits of interest for first level decode +#define OPCODE_M_IMMDATA 0x80 +#define OPCODE_M_IMMDATA64 0x40 +#define OPCODE_M_64BIT 0x40 // for CMP +#define OPCODE_M_RELADDR 0x10 // for CALL instruction +#define OPCODE_M_CMPI32_DATA 0x80 // for CMPI +#define OPCODE_M_CMPI64 0x40 // for CMPI 32 or 64 bit comparison +#define OPERAND_M_MOVIN_N 0x80 +#define OPERAND_M_CMPI_INDEX 0x10 + +// +// Masks for instructions that encode presence of indexes for operand1 and/or +// operand2. +// +#define OPCODE_M_IMMED_OP1 0x80 +#define OPCODE_M_IMMED_OP2 0x40 + +// +// Bit masks for operand encodings +// +#define OPERAND_M_INDIRECT1 0x08 +#define OPERAND_M_INDIRECT2 0x80 +#define OPERAND_M_OP1 0x07 +#define OPERAND_M_OP2 0x70 + +// +// Masks for data manipulation instructions +// +#define DATAMANIP_M_64 0x40 // 64-bit width operation +#define DATAMANIP_M_IMMDATA 0x80 + +// +// For MOV instructions, need a mask for the opcode when immediate +// data applies to R2. +// +#define OPCODE_M_IMMED_OP2 0x40 + +// +// The MOVI/MOVIn instructions use bit 6 of operands byte to indicate +// if an index is present. Then bits 4 and 5 are used to indicate the width +// of the move. +// +#define MOVI_M_IMMDATA 0x40 +#define MOVI_M_DATAWIDTH 0xC0 +#define MOVI_DATAWIDTH16 0x40 +#define MOVI_DATAWIDTH32 0x80 +#define MOVI_DATAWIDTH64 0xC0 +#define MOVI_M_MOVEWIDTH 0x30 +#define MOVI_MOVEWIDTH8 0x00 +#define MOVI_MOVEWIDTH16 0x10 +#define MOVI_MOVEWIDTH32 0x20 +#define MOVI_MOVEWIDTH64 0x30 + +// +// Masks for CALL instruction encodings +// +#define OPERAND_M_RELATIVE_ADDR 0x10 +#define OPERAND_M_NATIVE_CALL 0x20 + +// +// Masks for decoding push/pop instructions +// +#define PUSHPOP_M_IMMDATA 0x80 // opcode bit indicating immediate data +#define PUSHPOP_M_64 0x40 // opcode bit indicating 64-bit operation +// +// Mask for operand of JMP instruction +// +#define JMP_M_RELATIVE 0x10 +#define JMP_M_CONDITIONAL 0x80 +#define JMP_M_CS 0x40 + +// +// Macros to determine if a given operand is indirect +// +#define OPERAND1_INDIRECT(op) ((op) & OPERAND_M_INDIRECT1) +#define OPERAND2_INDIRECT(op) ((op) & OPERAND_M_INDIRECT2) + +// +// Macros to extract the operands from second byte of instructions +// +#define OPERAND1_REGNUM(op) ((op) & OPERAND_M_OP1) +#define OPERAND2_REGNUM(op) (((op) & OPERAND_M_OP2) >> 4) + +#define OPERAND1_CHAR(op) ('0' + OPERAND1_REGNUM (op)) +#define OPERAND2_CHAR(op) ('0' + OPERAND2_REGNUM (op)) + +// +// Condition masks usually for byte 1 encodings of code +// +#define CONDITION_M_CONDITIONAL 0x80 +#define CONDITION_M_CS 0x40 + +/// +/// Protocol Guid Name defined in spec. +/// +#define EFI_EBC_PROTOCOL_GUID EFI_EBC_INTERPRETER_PROTOCOL_GUID + +/// +/// Define for forward reference. +/// +typedef struct _EFI_EBC_PROTOCOL EFI_EBC_PROTOCOL; + +/** + Creates a thunk for an EBC entry point, returning the address of the thunk. + + A PE32+ EBC image, like any other PE32+ image, contains an optional header that specifies the + entry point for image execution. However, for EBC images, this is the entry point of EBC + instructions, so is not directly executable by the native processor. Therefore, when an EBC image is + loaded, the loader must call this service to get a pointer to native code (thunk) that can be executed, + which will invoke the interpreter to begin execution at the original EBC entry point. + + @param This A pointer to the EFI_EBC_PROTOCOL instance. + @param ImageHandle Handle of image for which the thunk is being created. + @param EbcEntryPoint Address of the actual EBC entry point or protocol service the thunk should call. + @param Thunk Returned pointer to a thunk created. + + @retval EFI_SUCCESS The function completed successfully. + @retval EFI_INVALID_PARAMETER Image entry point is not 2-byte aligned. + @retval EFI_OUT_OF_RESOURCES Memory could not be allocated for the thunk. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_EBC_CREATE_THUNK)( + IN EFI_EBC_PROTOCOL *This, + IN EFI_HANDLE ImageHandle, + IN VOID *EbcEntryPoint, + OUT VOID **Thunk + ); + +/** + Called prior to unloading an EBC image from memory. + + This function is called after an EBC image has exited, but before the image is actually unloaded. It + is intended to provide the interpreter with the opportunity to perform any cleanup that may be + necessary as a result of loading and executing the image. + + @param This A pointer to the EFI_EBC_PROTOCOL instance. + @param ImageHandle Image handle of the EBC image that is being unloaded from memory. + + @retval EFI_SUCCESS The function completed successfully. + @retval EFI_INVALID_PARAMETER Image handle is not recognized as belonging + to an EBC image that has been executed. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_EBC_UNLOAD_IMAGE)( + IN EFI_EBC_PROTOCOL *This, + IN EFI_HANDLE ImageHandle + ); + +/** + This is the prototype for the Flush callback routine. A pointer to a routine + of this type is passed to the EBC EFI_EBC_REGISTER_ICACHE_FLUSH protocol service. + + @param Start The beginning physical address to flush from the processor's instruction cache. + @param Length The number of bytes to flush from the processor's instruction cache. + + @retval EFI_SUCCESS The function completed successfully. + +**/ +typedef +EFI_STATUS +(EFIAPI *EBC_ICACHE_FLUSH)( + IN EFI_PHYSICAL_ADDRESS Start, + IN UINT64 Length + ); + +/** + Registers a callback function that the EBC interpreter calls to flush + the processor instruction cache following creation of thunks. + + @param This A pointer to the EFI_EBC_PROTOCOL instance. + @param Flush Pointer to a function of type EBC_ICACH_FLUSH. + + @retval EFI_SUCCESS The function completed successfully. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_EBC_REGISTER_ICACHE_FLUSH)( + IN EFI_EBC_PROTOCOL *This, + IN EBC_ICACHE_FLUSH Flush + ); + +/** + Called to get the version of the interpreter. + + This function is called to get the version of the loaded EBC interpreter. The value and format of the + returned version is identical to that returned by the EBC BREAK 1 instruction. + + @param This A pointer to the EFI_EBC_PROTOCOL instance. + @param Version Pointer to where to store the returned version of the interpreter. + + @retval EFI_SUCCESS The function completed successfully. + @retval EFI_INVALID_PARAMETER Version pointer is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_EBC_GET_VERSION)( + IN EFI_EBC_PROTOCOL *This, + IN OUT UINT64 *Version + ); + +/// +/// The EFI EBC protocol provides services to load and execute EBC images, which will typically be +/// loaded into option ROMs. The image loader will load the EBC image, perform standard relocations, +/// and invoke the CreateThunk() service to create a thunk for the EBC image's entry point. The +/// image can then be run using the standard EFI start image services. +/// +struct _EFI_EBC_PROTOCOL { + EFI_EBC_CREATE_THUNK CreateThunk; + EFI_EBC_UNLOAD_IMAGE UnloadImage; + EFI_EBC_REGISTER_ICACHE_FLUSH RegisterICacheFlush; + EFI_EBC_GET_VERSION GetVersion; +}; + +// +// Extern the global EBC protocol GUID +// +extern EFI_GUID gEfiEbcProtocolGuid; + +#endif |