diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h | 110 |
1 files changed, 55 insertions, 55 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h index b325c0ccf7..94fe36feb9 100644 --- a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DriverBinding.h @@ -1,17 +1,17 @@ /** @file UEFI DriverBinding Protocol is defined in UEFI specification. - - This protocol is produced by every driver that follows the UEFI Driver Model, + + This protocol is produced by every driver that follows the UEFI Driver Model, and it is the central component that allows drivers and controllers to be managed. Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> -This program and the accompanying materials are licensed and made available under -the terms and conditions of the BSD License that accompanies this distribution. +This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php. - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ @@ -29,33 +29,33 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. typedef struct _EFI_DRIVER_BINDING_PROTOCOL EFI_DRIVER_BINDING_PROTOCOL; /** - Tests to see if this driver supports a given controller. If a child device is provided, + Tests to see if this driver supports a given controller. If a child device is provided, it further tests to see if this driver supports creating a handle for the specified child device. - This function checks to see if the driver specified by This supports the device specified by - ControllerHandle. Drivers will typically use the device path attached to - ControllerHandle and/or the services from the bus I/O abstraction attached to - ControllerHandle to determine if the driver supports ControllerHandle. This function - may be called many times during platform initialization. In order to reduce boot times, the tests - performed by this function must be very small, and take as little time as possible to execute. This - function must not change the state of any hardware devices, and this function must be aware that the - device specified by ControllerHandle may already be managed by the same driver or a - different driver. This function must match its calls to AllocatePages() with FreePages(), - AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). - Because ControllerHandle may have been previously started by the same driver, if a protocol is - already in the opened state, then it must not be closed with CloseProtocol(). This is required + This function checks to see if the driver specified by This supports the device specified by + ControllerHandle. Drivers will typically use the device path attached to + ControllerHandle and/or the services from the bus I/O abstraction attached to + ControllerHandle to determine if the driver supports ControllerHandle. This function + may be called many times during platform initialization. In order to reduce boot times, the tests + performed by this function must be very small, and take as little time as possible to execute. This + function must not change the state of any hardware devices, and this function must be aware that the + device specified by ControllerHandle may already be managed by the same driver or a + different driver. This function must match its calls to AllocatePages() with FreePages(), + AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). + Because ControllerHandle may have been previously started by the same driver, if a protocol is + already in the opened state, then it must not be closed with CloseProtocol(). This is required to guarantee the state of ControllerHandle is not modified by this function. @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle The handle of the controller to test. This handle - must support a protocol interface that supplies + @param[in] ControllerHandle The handle of the controller to test. This handle + must support a protocol interface that supplies an I/O abstraction to the driver. - @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This - parameter is ignored by device drivers, and is optional for bus - drivers. For bus drivers, if this parameter is not NULL, then - the bus driver must determine if the bus controller specified - by ControllerHandle and the child controller specified - by RemainingDevicePath are both supported by this + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For bus drivers, if this parameter is not NULL, then + the bus driver must determine if the bus controller specified + by ControllerHandle and the child controller specified + by RemainingDevicePath are both supported by this bus driver. @retval EFI_SUCCESS The device specified by ControllerHandle and @@ -82,28 +82,28 @@ EFI_STATUS Starts a device controller or a bus controller. The Start() function is designed to be invoked from the EFI boot service ConnectController(). - As a result, much of the error checking on the parameters to Start() has been moved into this - common boot service. It is legal to call Start() from other locations, + As a result, much of the error checking on the parameters to Start() has been moved into this + common boot service. It is legal to call Start() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic. 1. ControllerHandle must be a valid EFI_HANDLE. 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned EFI_DEVICE_PATH_PROTOCOL. 3. Prior to calling Start(), the Supported() function for the driver specified by This must - have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. + have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle The handle of the controller to start. This handle - must support a protocol interface that supplies + @param[in] ControllerHandle The handle of the controller to start. This handle + must support a protocol interface that supplies an I/O abstraction to the driver. - @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This - parameter is ignored by device drivers, and is optional for bus - drivers. For a bus driver, if this parameter is NULL, then handles - for all the children of Controller are created by this driver. - If this parameter is not NULL and the first Device Path Node is - not the End of Device Path Node, then only the handle for the - child device specified by the first Device Path Node of + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For a bus driver, if this parameter is NULL, then handles + for all the children of Controller are created by this driver. + If this parameter is not NULL and the first Device Path Node is + not the End of Device Path Node, then only the handle for the + child device specified by the first Device Path Node of RemainingDevicePath is created by this driver. - If the first Device Path Node of RemainingDevicePath is + If the first Device Path Node of RemainingDevicePath is the End of Device Path Node, no child handle is created by this driver. @@ -123,10 +123,10 @@ EFI_STATUS /** Stops a device controller or a bus controller. - - The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). - As a result, much of the error checking on the parameters to Stop() has been moved - into this common boot service. It is legal to call Stop() from other locations, + + The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). + As a result, much of the error checking on the parameters to Stop() has been moved + into this common boot service. It is legal to call Stop() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic. 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this same driver's Start() function. @@ -134,13 +134,13 @@ EFI_STATUS EFI_HANDLE. In addition, all of these handles must have been created in this driver's Start() function, and the Start() function must have called OpenProtocol() on ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. - + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle A handle to the device being stopped. The handle must - support a bus specific I/O protocol for the driver + @param[in] ControllerHandle A handle to the device being stopped. The handle must + support a bus specific I/O protocol for the driver to use to stop the device. @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. - @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL + @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL if NumberOfChildren is 0. @retval EFI_SUCCESS The device was stopped. @@ -157,14 +157,14 @@ EFI_STATUS ); /// -/// This protocol provides the services required to determine if a driver supports a given controller. +/// This protocol provides the services required to determine if a driver supports a given controller. /// If a controller is supported, then it also provides routines to start and stop the controller. /// struct _EFI_DRIVER_BINDING_PROTOCOL { EFI_DRIVER_BINDING_SUPPORTED Supported; EFI_DRIVER_BINDING_START Start; EFI_DRIVER_BINDING_STOP Stop; - + /// /// The version number of the UEFI driver that produced the /// EFI_DRIVER_BINDING_PROTOCOL. This field is used by @@ -178,20 +178,20 @@ struct _EFI_DRIVER_BINDING_PROTOCOL { /// 0xffffffef are reserved for IHV-developed drivers. /// UINT32 Version; - + /// /// The image handle of the UEFI driver that produced this instance /// of the EFI_DRIVER_BINDING_PROTOCOL. /// EFI_HANDLE ImageHandle; - + /// /// The handle on which this instance of the /// EFI_DRIVER_BINDING_PROTOCOL is installed. In most /// cases, this is the same handle as ImageHandle. However, for /// UEFI drivers that produce more than one instance of the /// EFI_DRIVER_BINDING_PROTOCOL, this value may not be - /// the same as ImageHandle. + /// the same as ImageHandle. /// EFI_HANDLE DriverBindingHandle; }; |