1 files changed, 0 insertions, 126 deletions
diff --git a/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-pko.h b/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-pko.h
deleted file mode 100644
index 90cd719b06..0000000000
--- a/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-pko.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/***********************license start***********************************
-* Copyright (c) 2003-2017  Cavium Inc. (support@cavium.com). All rights
-* reserved.
-*
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are
-* met:
-*
-*   * Redistributions of source code must retain the above copyright
-*     notice, this list of conditions and the following disclaimer.
-*
-*   * Redistributions in binary form must reproduce the above
-*     copyright notice, this list of conditions and the following
-*     disclaimer in the documentation and/or other materials provided
-*     with the distribution.
-*
-*   * Neither the name of Cavium Inc. nor the names of
-*     its contributors may be used to endorse or promote products
-*     derived from this software without specific prior written
-*     permission.
-*
-* This Software, including technical data, may be subject to U.S. export
-* control laws, including the U.S. Export Administration Act and its
-* associated regulations, and may be subject to export or import
-* regulations in other countries.
-*
-* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
-* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
-* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT
-* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
-* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
-* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
-* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
-* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT,
-* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK
-* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
-***********************license end**************************************/
-
-/**
- * @file
- *
- * Interface to the PKO.
- *
- * @addtogroup hal
- * @{
- */
-
-/* Maximum number of segments which fit flat lmtstore operation.
-   1) LMTST for PKO can be a maximum of 15 64bit words
-   2) PKO descriptors are 2 64bit words each
-   3) Every send requires PKO_SEND_HDR_S for hardware
-   So 15 words / 2 = 7 possible descriptors
-   7 - HDR  = 6 descriptors left for GATHER */
-#define BDK_PKO_SEG_LIMIT 6
-
-/**
- * Perform global init of PKO
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_pko_global_init(bdk_node_t node);
-
-/**
- * Configure PKO for a specific port. This is called for each
- * port on every interface that connects to PKO.
- *
- * @param handle Handle for port to config
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_pko_port_init(bdk_if_handle_t handle);
-
-/**
- * Enable PKO after all setup is complete
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_pko_enable(bdk_node_t node);
-
-/**
- * Get the current TX queue depth. Note that this operation may be slow
- * and adversly affect packet IO performance.
- *
- * @param handle Port to check
- *
- * @return Depth of the queue in packets
- */
-extern int bdk_pko_get_queue_depth(bdk_if_handle_t handle);
-
-/**
- * Set PKO shapping as a specific queue level
- *
- * @param node       Node to shape
- * @param queue      Queue to shape
- * @param level      Level in PKO
- * @param is_red     Non-zero of the rate is for the yellow/red transition. Zero for the
- *                   green/yellow transition.
- * @param is_packets Non-zero if the rate is packets/sec, otherwise rate is bits/sec
- * @param rate       Desired rate. A rate of zero disables shaping
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_pko_shape(bdk_node_t node, int queue, int level, int is_red, int is_packets, uint64_t rate);
-
-/**
- * Send a packet
- *
- * @param handle Handle of port to send on
- * @param packet Packet to send
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_pko_transmit(bdk_if_handle_t handle, const bdk_if_packet_t *packet);
-
-/**
- * Query PKO and fill in the receive stats for the supplied
- * interface handle. The interface must use PKO for TX.
- *
- * @param handle Port handle
- *
- * @return
- */
-extern void bdk_pko_fill_tx_stats(bdk_if_handle_t handle);
-
-/** @} */