diff options
Diffstat (limited to 'src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-fpa.h')
-rw-r--r-- | src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-fpa.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-fpa.h b/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-fpa.h new file mode 100644 index 0000000000..8094cd0fa0 --- /dev/null +++ b/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-fpa.h @@ -0,0 +1,162 @@ +/***********************license start*********************************** +* Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights +* reserved. +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are +* met: +* +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* * Redistributions in binary form must reproduce the above +* copyright notice, this list of conditions and the following +* disclaimer in the documentation and/or other materials provided +* with the distribution. +* +* * Neither the name of Cavium Inc. nor the names of +* its contributors may be used to endorse or promote products +* derived from this software without specific prior written +* permission. +* +* This Software, including technical data, may be subject to U.S. export +* control laws, including the U.S. Export Administration Act and its +* associated regulations, and may be subject to export or import +* regulations in other countries. +* +* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" +* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR +* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT +* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY +* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT +* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES +* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR +* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, +* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK +* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU. +***********************license end**************************************/ + +/** + * @file + * + * Interface to the hardware Free Pool Allocator. + * + * @addtogroup hal + * @{ + */ +#define BDK_FPA_NUM_AURAS 128 /* Must not be bigger than FPA_CONST[auras] or NPA_AF_LFX_AURAS_CFG[loc_aura_size] */ + +/** + * This enum represents the FPA hardware pools in use by the BDK + */ +typedef enum +{ + BDK_FPA_PACKET_POOL, /* Stores PKI packet buffers */ + BDK_FPA_SSO_POOL, /* Used for internal storage in the SSO, CN83XX and CN9XXX */ + BDK_FPA_PKO_POOL, /* Used for queue storage in the CN83XX PKO and CN9XXX SQB */ + BDK_FPA_NUM_POOLS = 16 /* Can be 16, or 32 for CN83XX. Must not be bigger than FPA_CONST[pools] */ +} bdk_fpa_pool_t; + +/** + * Structure representing the global state of the FPA + */ +typedef struct +{ + uint16_t buffer_size_pool[BDK_FPA_NUM_POOLS]; + uint16_t buffer_size_aura[BDK_FPA_NUM_AURAS]; + int next_free_aura; + int next_free_lf; /* Used on CN9XXX for RVU PF allocation */ + void *npa_auras_ptr; /* Pointer to Aura Context Table: BDK_FPA_NUM_AURAS * (Aura HW context) */ + void *npa_pools_ptr; /* Pointer to Pool Context Table: BDK_FPA_NUM_POOLS * (Pool HW context) */ +} __bdk_fpa_state_t; + +extern __bdk_fpa_state_t __bdk_fpa_node_state[BDK_NUMA_MAX_NODES]; + +/** + * Get a new block from an aura + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param aura Aura to get the block from (0-BDK_FPA_NUM_AURAS) + * + * @return Pointer to the block or NULL on failure + */ +extern void* (*bdk_fpa_alloc)(bdk_node_t node, int aura); + +/** + * Free a block allocated with bdk_fpa_alloc(). Does NOT provide memory ordering + * for core stores. Software must insure all pending writes are flushed before + * calling this function. + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param address Physical address to free to the FPA aura + * @param aura Aura number to free to (0-BDK_FPA_NUM_AURAS) + * @param num_cache_lines + * Cache lines to invalidate. Use this if the data in the buffer is no longer + * requires cache coherency. Normally best to set this to zero. + */ +extern void (*__bdk_fpa_raw_free)(bdk_node_t node, uint64_t address, int aura, int num_cache_lines); + +/** + * Fill a pool with buffers + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param pool Pool to initialize (0 <= pool < BDK_FPA_NUM_POOLS) + * @param num_blocks Number of blocks + * + * @return Zero on Success, negative on failure + */ +extern int (*bdk_fpa_fill_pool)(bdk_node_t node, bdk_fpa_pool_t pool, int num_blocks); + +/** + * Initialize an Aura for a specific pool + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param aura Aura to initialize, or -1 to dynamically allocate a free aura + * @param pool Pool this aura is for (0 <= pool < BDK_FPA_NUM_POOLS) + * @param num_blocks Number of buffers to allow this aura to contain. This may be different + * from the pool + * + * @return Aura number or negative on failure + */ +extern int (*bdk_fpa_init_aura)(bdk_node_t node, int aura, bdk_fpa_pool_t pool, int num_blocks); + +/** + * Free a block allocated with bdk_fpa_alloc(). Provides memory ordering + * for core stores. + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param ptr Pointer to the block to free + * @param aura Aura number to free to (0-BDK_FPA_NUM_AURAS) + * @param num_cache_lines + * Cache lines to invalidate. Use this if the data in the buffer is no longer + * requires cache coherency. Normally best to set this to zero. + */ +static inline void bdk_fpa_free(bdk_node_t node, void *ptr, int aura, int num_cache_lines) +{ + BDK_WMB; + __bdk_fpa_raw_free(node, bdk_ptr_to_phys(ptr), aura, num_cache_lines); +} + +/** + * Get the size of blocks controlled by the aura + * + * @param node Node to use in a Numa setup. See bdk-numa.h + * @param aura Aura number to access (0-BDK_FPA_NUM_AURAS) + * + * @return Size of the block in bytes + */ +static inline int bdk_fpa_get_block_size(bdk_node_t node, int aura) +{ + __bdk_fpa_state_t *fpa_state = &__bdk_fpa_node_state[node]; + return fpa_state->buffer_size_aura[aura]; +} + +/** + * Global FPA initialization + * + * @return Zero on success, negative on failure + */ +int bdk_fpa_init(bdk_node_t node); + +/** @} */ |