diff options
Diffstat (limited to 'src/vendorcode/amd/cimx/sb900/Oem.h')
| -rwxr-xr-x | src/vendorcode/amd/cimx/sb900/Oem.h | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/src/vendorcode/amd/cimx/sb900/Oem.h b/src/vendorcode/amd/cimx/sb900/Oem.h new file mode 100755 index 0000000000..edda5411a3 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb900/Oem.h @@ -0,0 +1,229 @@ +/*;******************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#define BIOS_SIZE 0x04 //04 - 1MB +#define LEGACY_FREE 0x00 +#define ACPI_SLEEP_TRAP 0x01 +//#define SPREAD_SPECTRUM_EPROM_LOAD 0x01 + +/** + * Module Specific Defines for platform BIOS + * + */ + +/** + * PCIEX_BASE_ADDRESS - Define PCIE base address + * + * @param[Option] MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000 + */ +#ifdef MOVE_PCIEBAR_TO_F0000000 + #define PCIEX_BASE_ADDRESS 0xF7000000 +#else + #define PCIEX_BASE_ADDRESS 0xE0000000 +#endif + +/** + * SMBUS0_BASE_ADDRESS - Smbus base address + * + */ +#ifndef SMBUS0_BASE_ADDRESS + #define SMBUS0_BASE_ADDRESS 0xB00 +#endif + +/** + * SMBUS1_BASE_ADDRESS - Smbus1 (ASF) base address + * + */ +#ifndef SMBUS1_BASE_ADDRESS + #define SMBUS1_BASE_ADDRESS 0xB20 +#endif + +/** + * SIO_PME_BASE_ADDRESS - Super IO PME base address + * + */ +#ifndef SIO_PME_BASE_ADDRESS + #define SIO_PME_BASE_ADDRESS 0xE00 +#endif + +/** + * SPI_BASE_ADDRESS - SPI controller (ROM) base address + * + */ +#ifndef SPI_BASE_ADDRESS + #define SPI_BASE_ADDRESS 0xFEC10000 +#endif + +/** + * WATCHDOG_TIMER_BASE_ADDRESS - WATCHDOG timer base address + * + */ +#ifndef WATCHDOG_TIMER_BASE_ADDRESS + #define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 // Watchdog Timer Base Address +#endif + +/** + * HPET_BASE_ADDRESS - HPET base address + * + */ +#ifndef HPET_BASE_ADDRESS + #define HPET_BASE_ADDRESS 0xFED00000 // HPET Base address +#endif + +/** + * ALT_ADDR_400 - For some BIOS codebases which use 0x400 as ACPI base address + * + */ +#ifdef ALT_ADDR_400 + #define ACPI_BLK_BASE 0x400 +#else + #define ACPI_BLK_BASE 0x800 +#endif + +#define PM1_STATUS_OFFSET 0x00 +#define PM1_ENABLE_OFFSET 0x02 +#define PM1_CONTROL_OFFSET 0x04 +#define PM_TIMER_OFFSET 0x08 +#define CPU_CONTROL_OFFSET 0x10 +#define EVENT_STATUS_OFFSET 0x20 +#define EVENT_ENABLE_OFFSET 0x24 + +/** + * PM1_EVT_BLK_ADDRESS - ACPI power management Event Block base address + * + */ +#define PM1_EVT_BLK_ADDRESS ACPI_BLK_BASE + PM1_STATUS_OFFSET // AcpiPm1EvtBlkAddr + +/** + * PM1_CNT_BLK_ADDRESS - ACPI power management Control block base address + * + */ +#define PM1_CNT_BLK_ADDRESS ACPI_BLK_BASE + PM1_CONTROL_OFFSET // AcpiPm1CntBlkAddr + +/** + * PM1_TMR_BLK_ADDRESS - ACPI power management Timer block base address + * + */ +#define PM1_TMR_BLK_ADDRESS ACPI_BLK_BASE + PM_TIMER_OFFSET // AcpiPmTmrBlkAddr + +/** + * CPU_CNT_BLK_ADDRESS - ACPI power management CPU Control block base address + * + */ +#define CPU_CNT_BLK_ADDRESS ACPI_BLK_BASE + CPU_CONTROL_OFFSET // CpuControlBlkAddr + +/** + * GPE0_BLK_ADDRESS - ACPI power management General Purpose Event block base address + * + */ +#define GPE0_BLK_ADDRESS ACPI_BLK_BASE + EVENT_STATUS_OFFSET // AcpiGpe0BlkAddr + +/** + * SMI_CMD_PORT - ACPI SMI Command block base address + * + */ +#define SMI_CMD_PORT 0xB0 // SmiCmdPortAddr + +/** + * ACPI_PMA_CNT_BLK_ADDRESS - ACPI power management additional control block base address + * + */ +#define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 // AcpiPmaCntBlkAddr + +/** + * SATA_IDE_MODE_SSID - Sata controller IDE mode SSID. + * Define value for SSID while SATA controller set to IDE mode. + */ +#define SATA_IDE_MODE_SSID 0x78001022 +/** + * SATA_RAID_MODE_SSID - Sata controller RAID mode SSID. + * Define value for SSID while SATA controller set to RAID mode. + */ +#define SATA_RAID_MODE_SSID 0x78021022 + +/** + * SATA_RAID5_MODE_SSID - Sata controller RAID5 mode SSID. + * Define value for SSID while SATA controller set to RAID5 mode. + */ +#define SATA_RAID5_MODE_SSID 0x78031022 + +/** + * SATA_AHCI_MODE_SSID - Sata controller AHCI mode SSID. + * Define value for SSID while SATA controller set to AHCI mode. + */ +#define SATA_AHCI_SSID 0x78011022 + +/** + * OHCI_SSID - All SB OHCI controllers SSID value. + * + */ +#define OHCI_SSID 0x78071022 + +/** + * EHCI_SSID - All SB EHCI controllers SSID value. + * + */ +#define EHCI_SSID 0x78081022 + +/** + * OHCI4_SSID - OHCI (USB 1.1 mode *HW force) controllers SSID value. + * + */ +#define OHCI4_SSID 0x78091022 + +/** + * SMBUS_SSID - Smbus controller (South Bridge device 0x14 function 0) SSID value. + * + */ +#define SMBUS_SSID 0x780B1022 + +/** + * IDE_SSID - SATA IDE controller (South Bridge device 0x14 function 1) SSID value. + * + */ +#define IDE_SSID 0x780C1022 + +/** + * AZALIA_SSID - AZALIA controller (South Bridge device 0x14 function 2) SSID value. + * + */ +#define AZALIA_SSID 0x780D1022 + +/** + * LPC_SSID - LPC controller (South Bridge device 0x14 function 3) SSID value. + * + */ +#define LPC_SSID 0x780E1022 + +/** + * PCIB_SSID - PCIB controller (South Bridge device 0x14 function 4) SSID value. + * + */ +#define PCIB_SSID 0x780F1022 + |