diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c new file mode 100644 index 0000000000..2c5cb8d69d --- /dev/null +++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c @@ -0,0 +1,317 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mnflow.c + * + * Common Northbridge initializer flow for MCT and DCT + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/NB) + * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ + * + **/ +/***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE PROC_MEM_NB_MNFLOW_FILECODE +/* features */ +#include "mftds.h" + +extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[]; +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +STATIC +MemNInitDCTNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +STATIC +MemNCleanupDctRegsNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +STATIC +MemNGetPORFreqLimitTblDrvNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ); +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function programs the MCT with initial values + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - AGESA_FATAL error did not occur (it is possible to have an Error that is not AGESA_SUCCESS) + * @return FALSE - AGESA_FATAL error occurred + */ + +BOOLEAN +MemNInitMCTNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_TECH_BLOCK *TechPtr; + UINT8 Dct; + BOOLEAN Flag; + ID_INFO CallOutIdInfo; + + TechPtr = NBPtr->TechPtr; + // Switch Tech functions for Nb + NBPtr->TechBlockSwitch (NBPtr); + // Start Memory controller initialization sequence + Flag = FALSE; + if (TechPtr->DimmPresence (TechPtr)) { + AGESA_TESTPOINT (TpProcMemPlatformSpecificInit, &(NBPtr->MemPtr->StdHeader)); + if (NBPtr->MemNPlatformSpecificFormFactorInitNb (NBPtr)) { + AGESA_TESTPOINT (TpProcMemSpdTiming, &(NBPtr->MemPtr->StdHeader)); + if (TechPtr->SpdCalcWidth (TechPtr)) { + AGESA_TESTPOINT (TpProcMemSpeedTclConfig, &(NBPtr->MemPtr->StdHeader)); + if (TechPtr->SpdGetTargetSpeed (TechPtr)) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + + Flag |= MemNInitDCTNb (NBPtr); + } + + if (Flag && !NBPtr->IsSupported[TwoStageDramInit] && (NBPtr->MCTPtr->ErrCode != AGESA_FATAL)) { + MemFInitTableDrive (NBPtr, MTBeforeDInit); + AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader)); + IDS_PERF_TIMESTAMP (TP_BEGINAGESAHOOKBEFOREDRAMINIT, &(NBPtr->MemPtr->StdHeader)); + CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId; + CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId; + IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId); + AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, NBPtr->MemPtr); + IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) ? 5 : + (NBPtr->RefPtr->DDR3Voltage == VOLT1_35) ? 35 : + (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999); + AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader)); + IDS_PERF_TIMESTAMP (TP_ENDAGESAHOOKBEFOREDRAMINIT, &(NBPtr->MemPtr->StdHeader)); + IDS_OPTION_HOOK (IDS_BEFORE_DRAM_INIT, NBPtr, &(NBPtr->MemPtr->StdHeader)); + NBPtr->StartupDCT (NBPtr); + } + } + } + } + } + return (BOOLEAN) (NBPtr->MCTPtr->ErrCode != AGESA_FATAL); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes the platform specific block for families that support + * table driven form factor + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - AGESA_SUCCESS + */ + +BOOLEAN +MemNPlatformSpecificFormFactorInitTblDrvNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + NBPtr->PsPtr->MemPDoPs = MemPPSCFlow; + NBPtr->PsPtr->MemPGetPORFreqLimit = MemNGetPORFreqLimitTblDrvNb; + NBPtr->PsPtr->MemPGetPass1Seeds = MemPGetPSCPass1Seed; + } + + return TRUE; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function programs the DCT with initial values + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Error did not occur + * @return FALSE - Error occurred + */ + +BOOLEAN +STATIC +MemNInitDCTNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_TECH_BLOCK *TechPtr; + TechPtr = NBPtr->TechPtr; + TechPtr->SetDramMode (TechPtr); + + if (!NBPtr->MCTPtr->GangedMode || (NBPtr->MCTPtr->Dct == 0)) { + if (NBPtr->DCTPtr->Timings.DctDimmValid == 0) { + NBPtr->DisableDCT (NBPtr); + } else { + MemNCleanupDctRegsNb (NBPtr); + if (TechPtr->AutoCycTiming (TechPtr)) { + if (TechPtr->SpdSetBanks (TechPtr)) { + if (NBPtr->StitchMemory (NBPtr)) { + // if all dimms on a DCT are disabled, the DCT needs to be disabled. + if (NBPtr->DCTPtr->Timings.CsEnabled != 0) { + if (NBPtr->AutoConfig (NBPtr)) { + if (NBPtr->PlatformSpec (NBPtr)) { + return TRUE; + } + } + } else { + NBPtr->DisableDCT (NBPtr); + } + } + } + } + } + } + return FALSE; +} + +/*-----------------------------------------------------------------------------*/ +/** + * + * This function clears DCT registers + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +STATIC +MemNCleanupDctRegsNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + BIT_FIELD_NAME BitField; + + for (BitField = BFCSBaseAddr0Reg; BitField <= BFCSBaseAddr7Reg; BitField++) { + MemNSetBitFieldNb (NBPtr, BitField, 0); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This is function gets the POR speed limit for families supports table driven form factor + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +STATIC +MemNGetPORFreqLimitTblDrvNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 i; + + i = 0; + while (memPlatSpecFlowArray[i] != NULL) { + if ((memPlatSpecFlowArray[i])->MaxFrequency (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) { + break; + } + i++; + } + // Check if there is no table found across CPU families. If so, disable channels. + if (memPlatSpecFlowArray[i] == NULL) { + IDS_HDT_CONSOLE (MEM_FLOW, "\nDCT %d: No MaxFreq table. This channel will be disabled.\n", NBPtr->Dct); + NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid; + PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); + SetMemError (AGESA_ERROR, NBPtr->MCTPtr); + // Change target speed to highest value so it won't affect other channels when leveling frequency across the node. + NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY; + } +} |