diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15tn/Config/OptionHtInstall.h')
| -rw-r--r-- | src/vendorcode/amd/agesa/f15tn/Config/OptionHtInstall.h | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f15tn/Config/OptionHtInstall.h b/src/vendorcode/amd/agesa/f15tn/Config/OptionHtInstall.h new file mode 100644 index 0000000000..5069412541 --- /dev/null +++ b/src/vendorcode/amd/agesa/f15tn/Config/OptionHtInstall.h @@ -0,0 +1,338 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Install of build option: Ht + * + * Contains AMD AGESA install macros and test conditions. Output is the + * defaults tables reflecting the User's build options selection. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Options + * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ + */ +/***************************************************************************** + * + * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#ifndef _OPTION_HT_INSTALL_H_ +#define _OPTION_HT_INSTALL_H_ + +#include "Topology.h" +#include <Proc/HT/htFeat.h> +#include <Proc/HT/htInterface.h> +#include <Proc/HT/htNb.h> +#include <Proc/HT/htTopologies.h> +/* + * Advanced Option only, hardware socket naming is the preferred method. + */ +#ifdef BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP + #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP (BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP) +#else + #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP (NULL) +#endif + +/* + * OPTION_IS_RECOVERY_HT is true if Basic API is being used. + */ +#ifndef OPTION_IS_RECOVERY_HT + #define OPTION_IS_RECOVERY_HT TRUE +#endif + +/* This option is designed to be included into the platform solution install + * file. The platform solution install file will define the options status. + * Check to validate the definition. + */ + +#ifndef OPTION_MULTISOCKET + #error BLDOPT: Option not defined: "OPTION_MULTISOCKET" +#endif + +/* + * Based on user level options, set Ht internal options. + * For now, Family 10h support will assume single module. For multi module, + * this will have to be changed to not set non-coherent only. + */ +#define OPTION_HT_NON_COHERENT_ONLY FALSE + +#if (OPTION_FAMILY15H_TN == TRUE) +/* Families with only PCIe do not need a non-coherent only option. */ +#else + // Process Family 10h and 15h Models 00h-0Fh by socket, applying the MultiSocket option where it is allowable. + #if OPTION_G34_SOCKET_SUPPORT == FALSE + // Hydra has coherent support, other Family 10h should follow MultiSocket support. + #if OPTION_MULTISOCKET == FALSE + #undef OPTION_HT_NON_COHERENT_ONLY + #define OPTION_HT_NON_COHERENT_ONLY TRUE + #endif + #endif +#endif + +/* + * Macros will generate the correct item reference based on options + */ +#if AGESA_ENTRY_INIT_EARLY == TRUE + // Select the interface and features + #if ((OPTION_FAMILY15H_TN == TRUE)) + #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL + #define INTERNAL_HT_OPTION_FEATURES &HtFeaturesNone + #define INTERNAL_HT_OPTION_INTERFACE &HtInterfaceMapsOnly + #else + #if (FALSE) + #else + // Family 10h and 15h Models 00h-0Fh + #if OPTION_HT_NON_COHERENT_ONLY == FALSE + #define INTERNAL_HT_OPTION_FEATURES &HtFeaturesDefault + #define INTERNAL_HT_OPTION_INTERFACE &HtInterfaceDefault + #else + #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL + #define INTERNAL_HT_OPTION_FEATURES &HtFeaturesNonCoherentOnly + #define INTERNAL_HT_OPTION_INTERFACE &HtInterfaceNonCoherentOnly + #endif + #endif + #endif + // Select Northbridge components + #if OPTION_FAMILY10H == TRUE + #if OPTION_HT_NON_COHERENT_ONLY == TRUE + #define INTERNAL_HT_OPTION_FAM10_NB &HtFam10NbNonCoherentOnly, &HtFam10RevDNbNonCoherentOnly, &HtFam10RevENbNonCoherentOnly, + #else + #define INTERNAL_HT_OPTION_FAM10_NB &HtFam10NbDefault, &HtFam10RevDNbDefault, &HtFam10RevENbDefault, + #endif + #else + #define INTERNAL_HT_OPTION_FAM10_NB + #endif + + #if OPTION_FAMILY12H == TRUE + #define INTERNAL_HT_OPTION_FAM12_NB &HtFam12Nb, + #else + #define INTERNAL_HT_OPTION_FAM12_NB + #endif + + #if OPTION_FAMILY14H == TRUE + #define INTERNAL_HT_OPTION_FAM14_NB &HtFam14Nb, + #else + #define INTERNAL_HT_OPTION_FAM14_NB + #endif + + #if OPTION_FAMILY15H == TRUE + #if OPTION_FAMILY15H_OR == TRUE + #if OPTION_HT_NON_COHERENT_ONLY == TRUE + #define INTERNAL_HT_OPTION_FAM15_NB &HtFam15NbNonCoherentOnly, + #else + #define INTERNAL_HT_OPTION_FAM15_NB &HtFam15NbDefault, + #endif + #else + #define INTERNAL_HT_OPTION_FAM15_NB + #endif + #if OPTION_FAMILY15H_TN == TRUE + #define INTERNAL_HT_OPTION_FAM15TN_NB &HtFam15Mod1xNb, + #else + #define INTERNAL_HT_OPTION_FAM15TN_NB + #endif +// #if OPTION_FAMILY15H_KM == TRUE +// #define INTERNAL_HT_OPTION_FAM15KM_NB &HtFam15Mod2xNbDefault, +// #else +// #define INTERNAL_HT_OPTION_FAM15KM_NB +// #endif +// #if OPTION_FAMILY15H_KV == TRUE +// #define INTERNAL_HT_OPTION_FAM15KV_NB &HtFam15Mod1xNb, +// #else +// #define INTERNAL_HT_OPTION_FAM15KV_NB +// #endif + #else + #define INTERNAL_HT_OPTION_FAM15_NB + #define INTERNAL_HT_OPTION_FAM15TN_NB + //#define INTERNAL_HT_OPTION_FAM15KM_NB + //#define INTERNAL_HT_OPTION_FAM15KV_NB + #endif + + #define INTERNAL_ONLY_NB_LIST_ITEM INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS, + #ifndef INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS + #undef INTERNAL_ONLY_NB_LIST_ITEM + #define INTERNAL_ONLY_NB_LIST_ITEM + #endif + + /* Install the correct set of northbridge implementations. Each item provides its own comma, the last item + * is ok to have a comma because the final item (NULL) is added below. + */ + #define INTERNAL_HT_OPTION_SUPPORTED_NBS \ + INTERNAL_ONLY_NB_LIST_ITEM \ + INTERNAL_HT_OPTION_FAM10_NB \ + INTERNAL_HT_OPTION_FAM15_NB \ + INTERNAL_HT_OPTION_FAM12_NB \ + INTERNAL_HT_OPTION_FAM14_NB \ + INTERNAL_HT_OPTION_FAM15TN_NB + +#else + // Not Init Early + #define INTERNAL_HT_OPTION_FEATURES NULL + #define INTERNAL_HT_OPTION_INTERFACE NULL + #define INTERNAL_HT_OPTION_SUPPORTED_NBS NULL + #define HT_OPTIONS_PLATFORM NULL + #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL +#endif + +#ifdef AGESA_ENTRY_INIT_EARLY + #if AGESA_ENTRY_INIT_EARLY == TRUE + + extern HT_FEATURES HtFeaturesDefault; + extern HT_FEATURES HtFeaturesNonCoherentOnly; + extern HT_FEATURES HtFeaturesCoherentOnly; + extern HT_FEATURES HtFeaturesNone; + extern HT_INTERFACE HtInterfaceDefault; + extern HT_INTERFACE HtInterfaceNonCoherentOnly; + extern HT_INTERFACE HtInterfaceCoherentOnly; + extern HT_INTERFACE HtInterfaceMapsOnly; + extern HT_INTERFACE HtInterfaceNone; + extern NORTHBRIDGE HtFam10NbDefault; + extern NORTHBRIDGE HtFam10RevDNbDefault; + extern NORTHBRIDGE HtFam10NbNonCoherentOnly; + extern NORTHBRIDGE HtFam10RevDNbNonCoherentOnly; + extern NORTHBRIDGE HtFam10RevENbDefault; + extern NORTHBRIDGE HtFam10RevENbNonCoherentOnly; + extern NORTHBRIDGE HtFam12Nb; + extern NORTHBRIDGE HtFam14Nb; + extern NORTHBRIDGE HtFam10NbNone; + extern NORTHBRIDGE HtFam15NbDefault; + extern NORTHBRIDGE HtFam15NbNonCoherentOnly; + extern NORTHBRIDGE HtFam15Mod1xNb; + + CONST VOID * CONST ROMDATA HtInstalledFamilyNorthbridgeList[] = { + INTERNAL_HT_OPTION_SUPPORTED_NBS + NULL + }; + + STATIC CONST AMD_HT_INTERFACE ROMDATA HtOptionsPlatform = + { + CFG_STARTING_BUSNUM, CFG_MAXIMUM_BUSNUM, CFG_ALLOCATED_BUSNUM, + (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST, + (DEVICE_CAP_OVERRIDE *)CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST, + (CPU_TO_CPU_PCB_LIMITS *)CFG_HTFABRIC_LIMITS_LIST, + (IO_PCB_LIMITS *)CFG_HTCHAIN_LIMITS_LIST, + (OVERRIDE_BUS_NUMBERS *)CFG_BUS_NUMBERS_LIST, + (IGNORE_LINK *)CFG_IGNORE_LINK_LIST, + (SKIP_REGANG *)CFG_LINK_SKIP_REGANG_LIST, + (UINT8 **)CFG_ADDITIONAL_TOPOLOGIES_LIST, + (SYSTEM_PHYSICAL_SOCKET_MAP *)CFG_SYSTEM_PHYSICAL_SOCKET_MAP + }; + #ifndef HT_OPTIONS_PLATFORM + #define HT_OPTIONS_PLATFORM &HtOptionsPlatform + #endif + + /** + * A list of all the supported topologies. + * + */ + #ifndef INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES + CONST UINT8 *CONST ROMDATA AmdTopolist[] = + { + amdHtTopologySingleNode, + amdHtTopologyDualNode, + amdHtTopologyThreeLine, + amdHtTopologyTriangle, + amdHtTopologyFourLine, + amdHtTopologyFourStar, + amdHtTopologyFourDegenerate, + amdHtTopologyFourSquare, + amdHtTopologyFourKite, + amdHtTopologyFourFully, + amdHtTopologyFiveFully, + amdHtTopologyFiveTwistedLadder, + amdHtTopologySixFully, + amdHtTopologySixDoubloonLower, + amdHtTopologySixDoubloonUpper, + amdHtTopologySixTwistedLadder, + amdHtTopologySevenFully, + amdHtTopologySevenTwistedLadder, + amdHtTopologyEightFully, + amdHtTopologyEightDoubloon, + amdHtTopologyEightTwistedLadder, + amdHtTopologyEightStraightLadder, + amdHtTopologySixTwinTriangles, + amdHtTopologyEightTwinFullyFourWays, + NULL + }; + #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES AmdTopolist + #endif + + /** + * Declare the instance of the Ht option configuration structure + */ + CONST OPTION_HT_CONFIGURATION ROMDATA OptionHtConfiguration = { + OPTION_IS_RECOVERY_HT, + CFG_SET_HTCRC_SYNC_FLOOD, + CFG_USE_UNIT_ID_CLUMPING, + HT_OPTIONS_PLATFORM, + INTERNAL_HT_OPTION_INTERFACE, + INTERNAL_HT_OPTION_FEATURES, + &HtInstalledFamilyNorthbridgeList, + INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES + }; + + #endif +#endif + +#ifndef OPTION_HT_INIIT_RESET_ENTRY + + #define OPTION_HT_INIIT_RESET_ENTRY AmdHtInitReset + #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY AmdHtResetConstructor + + #if ((OPTION_FAMILY15H_TN == TRUE) ) + #undef OPTION_HT_INIIT_RESET_ENTRY + #undef OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY + #define OPTION_HT_INIIT_RESET_ENTRY NULL + #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY NULL + #endif + + #if ((OPTION_FAMILY10H == TRUE) || (OPTION_FAMILY15H_OR == TRUE)) + #undef OPTION_HT_INIIT_RESET_ENTRY + #undef OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY + #define OPTION_HT_INIIT_RESET_ENTRY AmdHtInitReset + #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY AmdHtResetConstructor + #endif + +#endif + +#ifdef AGESA_ENTRY_INIT_RESET + #if AGESA_ENTRY_INIT_RESET == TRUE + + CONST AMD_HT_RESET_INTERFACE ROMDATA HtOptionResetDefaults = { + (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST, + 0 // Unused by options + }; + + CONST OPTION_HT_INIT_RESET ROMDATA HtOptionInitReset = { + OPTION_HT_INIIT_RESET_ENTRY, + OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY + }; + #endif + +#endif + +#endif // _OPTION_HT_INSTALL_H_ |